summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2019-03-03fsl_sec: fix register layout on Layerscape architecturesLaurentiu Tudor
On Layerscape architectures the SEC memory map is 1MB and the register blocks contained in it are 64KB aligned, not 4KB as the ccsr_sec structure currently assumes. Fix the layout of the structure for these architectures. Signed-off-by: Laurentiu Tudor <[email protected]> Reviewed-by: Horia Geanta <[email protected]> Reviewed-by: Bharat Bhushan <[email protected]> Reviewed-by: Prabhakar Kushwaha <[email protected]>
2019-03-03configs: fsl: move DDR specific defines to KconfigRajesh Bhagat
Moves below DDR specific defines to Kconfig: CONFIG_FSL_DDR_BIST CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE CONFIG_FSL_DDR_INTERACTIVE CONFIG_FSL_DDR_SYNC_REFRESH Signed-off-by: Rajesh Bhagat <[email protected]> Reviewed-by: York Sun <[email protected]> Reviewed-by: Prabhakar Kushwaha <[email protected]>
2019-03-03board: ls1043a: use default scan_dev_for_bootMian Yousaf Kaukab
Default environment variable is more complete. Also scans for efi binaries for example. Signed-off-by: Mian Yousaf Kaukab <[email protected]> Reviewed-by: Ashish Kumar <[email protected]> Reviewed-by: Prabhakar Kushwaha <[email protected]>
2019-03-03board: ls1043a: enable dhcp bootMian Yousaf Kaukab
dhcp boot is a useful feature and works out-of-the-box on these platforms. Enable it as a boot source. Signed-off-by: Mian Yousaf Kaukab <[email protected]> Reviewed-by: Prabhakar Kushwaha <[email protected]>
2019-03-03board: ls1046a: use default scan_dev_for_bootMian Yousaf Kaukab
Default environment variable is more complete. Also scans for efi binaries for example. Signed-off-by: Mian Yousaf Kaukab <[email protected]> Reviewed-by: Prabhakar Kushwaha <[email protected]>
2019-03-03board: ls1046a: enable dhcp bootMian Yousaf Kaukab
dhcp boot is a useful feature and works out-of-the-box on these platforms. Enable it as a boot source. Signed-off-by: Mian Yousaf Kaukab <[email protected]> Reviewed-by: Prabhakar Kushwaha <[email protected]>
2019-03-03board: ls2080ardb: use default scan_dev_for_bootMian Yousaf Kaukab
Default environment variable is more complete. Also scans for efi binaries for example. Signed-off-by: Mian Yousaf Kaukab <[email protected]> Reviewed-by: Prabhakar Kushwaha <[email protected]>
2019-03-03Revert "ls2080ardb: remove dhcp function from env as boot source"Mian Yousaf Kaukab
dhcp boot is a useful feature and works out-of-the-box for ls2088a platforms. Moreover, no solid reason is given for disabling it. Revert the patch to re-enable it. This reverts commit aea5cd75e63c20de4c00ce24a93eeee8542f923e. Signed-off-by: Mian Yousaf Kaukab <[email protected]> Reviewed-by: Prabhakar Kushwaha <[email protected]>
2019-03-03board: ls1088ardb: use default scan_dev_for_bootMian Yousaf Kaukab
Default environment variable is more complete. Also scans for efi binaries for example. Signed-off-by: Mian Yousaf Kaukab <[email protected]> Reviewed-by: Prabhakar Kushwaha <[email protected]>
2019-03-03Revert "ls1088a: remove dhcp function from u-boot env as boot source"Mian Yousaf Kaukab
dhcp boot is a useful feature and works out-of-the-box for ls1088a platforms. Moreover, no solid reason is given for disabling it. Revert the patch to re-enable it. This reverts commit 863e42e8b1f9e97d87919e20e34a7b98089f7522. Signed-off-by: Mian Yousaf Kaukab <[email protected]> Reviewed-by: Prabhakar Kushwaha <[email protected]>
2019-02-27riscv: Add SiFive FU540 board supportAnup Patel
This patch adds SiFive FU540 board support. For now, only SiFive serial, SiFive PRCI, and Cadance MACB drivers are only enabled. The SiFive FU540 defconfig by default builds U-Boot for S-Mode because U-Boot on SiFive FU540 will run in S-Mode as payload of BBL or OpenSBI. Signed-off-by: Atish Patra <[email protected]> Signed-off-by: Anup Patel <[email protected]> Reviewed-by: Alexander Graf <[email protected]> Reviewed-by: Lukas Auer <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2019-02-27clk: Add SiFive FU540 PRCI clock driverAnup Patel
Add driver code for the SiFive FU540 PRCI IP block. This IP block handles reset and clock control for the SiFive FU540 device and implements SoC-level clock tree controls and dividers. Based on code written by Wesley Terpstra <[email protected]> found in commit 999529edf517ed75b56659d456d221b2ee56bb60 of: https://github.com/riscv/riscv-linux Boot and PLL rate change were tested on a SiFive HiFive Unleashed board. Signed-off-by: Paul Walmsley <[email protected]> Signed-off-by: Atish Patra <[email protected]> Signed-off-by: Anup Patel <[email protected]> Reviewed-by: Alexander Graf <[email protected]>
2019-02-25efi_loader: define load option attributesAKASHI Takahiro
See UEFI specification v2.7a, section 3.1.3, "Load Option Processing." Signed-off-by: AKASHI Takahiro <[email protected]> Reviewed-by: Heinrich Schuchardt <[email protected]>
2019-02-25cmd: env: add "-e" option for handling UEFI variablesAKASHI Takahiro
"env [print|set] -e" allows for handling uefi variables without knowing details about mapping to corresponding u-boot variables. Signed-off-by: AKASHI Takahiro <[email protected]> Reviewed-by: Heinrich Schuchardt <[email protected]>
2019-02-22preboot: Introduce CONFIG_USE_PREBOOT and migrate CONFIG_PREBOOTMasahiro Yamada
This is the same migration path as commit b6251db8c3f0 ("Kconfig: Introduce USE_BOOTCOMMAND and migrate BOOTCOMMAND"). I also moved the description in README to the Kconfig help. I ripped off the sentence about 'LWMON' since it is gone already. I only let my boards migrate, leaving the rest to platform maintainers. Signed-off-by: Masahiro Yamada <[email protected]>
2019-02-20Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini
2019-02-20Merge git://git.denx.de/u-boot-x86Tom Rini
- Add support for sound. Albeit the big changeset, changes are pretty limited to x86 only and a few new sound drivers used by x86 so I think it would be good to have this in the next release.
2019-02-20Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
- Support of NXP's LX2160RDB and LX2160QDS platform - Enable SATA DM model for NXP's ARM SoCs
2019-02-20nyan-big: drop CONFIG_KEYBOARDPeter Robinson
The CONFIG_KEYBOARD does nothing as it's legacy and unused so just drop it from the config. Signed-off-by: Peter Robinson <[email protected]> Cc: Tom Warren <[email protected]> Cc: Stephen Warren <[email protected]> Cc: Allen Martin <[email protected]> Signed-off-by: Tom Warren <[email protected]>
2019-02-20Kconfig: tegra: Migrate TEGRA_KEYBOARDPeter Robinson
Migrate TEGRA_KEYBOARD from headers to Kconfig, only the seaboard uses it but we drop CONFIG_KEYBOARD as the driver doesn't use the legacy drv_keyboard_init. Signed-off-by: Peter Robinson <[email protected]> Cc: Tom Warren <[email protected]> Cc: Stephen Warren <[email protected]> Signed-off-by: Tom Warren <[email protected]>
2019-02-20Kconfig: tegra: Migrate USB_EHCI_TEGRAPeter Robinson
Migrate USB_EHCI_TEGRA from headers to Kconfig Signed-off-by: Peter Robinson <[email protected]> Cc: Tom Warren <[email protected]> Cc: Stephen Warren <[email protected]> Cc: Marek Vasut <[email protected]> Cc: Marcel Ziswiler <[email protected]> Cc: [email protected] Cc: Lucas Stach <[email protected]> Cc: Stefan Agner <[email protected]> Cc: Alban Bedel <[email protected]> Cc: Allen Martin <[email protected]> Signed-off-by: Tom Warren <[email protected]>
2019-02-20Kconfig: tegra: Migrate SYS_I2C_TEGRAPeter Robinson
Migrate SYS_I2C_TEGRA from headers to Kconfig Signed-off-by: Peter Robinson <[email protected]> Cc: Tom Warren <[email protected]> Cc: Stephen Warren <[email protected]> Cc: Heiko Schocher <[email protected]> Cc: Marcel Ziswiler <[email protected]> Cc: [email protected] Cc: Lucas Stach <[email protected]> Cc: Stefan Agner <[email protected]> Cc: Alban Bedel <[email protected]> Cc: Allen Martin <[email protected]> Signed-off-by: Tom Warren <[email protected]>
2019-02-20ARM: tegra: Reserve 32MB for the Linux kernelJonathan Hunter
Booting recently Linux -next kernels on 32-bit Tegra devices has been failing when using the 'multi_v7_defconfig' kenrel configuration because the size of has grown such that it is overwriting the FDT blob. Current Linux -next kernels built with the 'multi_v7_defconfig' have a total size of ~19.5MB (where .text is ~12.5MB, .data is ~6.5MB and .bss is ~0.5MB). Therefore, increase the memory location reserved for the Linux kernel to 32MB from 16MB for 32-bit Tegra devices. This change has been boot tested on Tegra20 Ventana, Tegra30 Cardhu and Tegra124 Jetson TK1 with the Linux next tree (20190212). Signed-off-by: Jonathan Hunter <[email protected]> Reviewed-by: Stephen Warren <[email protected]> Signed-off-by: Tom Warren <[email protected]>
2019-02-20tegra20: common: fix USB_EHCI_TXFIFO_THRESH valuePeter Robinson
All other Tegra devices that define USB_EHCI_TXFIFO_THRESH use hex representation, fix tegra20 to be the same format. Signed-off-by: Peter Robinson <[email protected]> Cc: Tom Warren <[email protected]> Cc: Stephen Warren <[email protected]> Signed-off-by: Tom Warren <[email protected]>
2019-02-20tegra: cleanup dangling comments in include/configsPeter Robinson
There's a number of dangling comments in various tegra configs post migrations of various configs so lets clean them up. Signed-off-by: Peter Robinson <[email protected]> Cc: Tom Warren <[email protected]> Cc: Stephen Warren <[email protected]> Cc: Marcel Ziswiler <[email protected]> Cc: Tom Warren <[email protected]> Cc: Stephen Warren <[email protected]> Cc: [email protected] Cc: Lucas Stach <[email protected]> Cc: Stefan Agner <[email protected]> Cc: Alban Bedel <[email protected]> Cc: Allen Martin <[email protected]> Reviewed-by: Marcel Ziswiler <[email protected]> Signed-off-by: Tom Warren <[email protected]>
2019-02-20sound: Add support for Intel HDASimon Glass
The Intel High-definition Audio is a newer-generation audio system which provides for transfer of a large number of audio stream, each containing up to 16 channels. Add support for HDA as a library which can be used by other drivers. U-Boot currently uses only two channels (stereo). Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2019-02-20sound: Add uclass operations for beepingSimon Glass
Some audio codecs such as Intel HDA do not need to use digital data to play sounds, but instead have a way to emit beeps. Add this interface as an option. If the beep interface is not supported, then the sound uclass falls back to the I2S interface. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2019-02-20sound: Mark sound_setup() as optionalSimon Glass
This method in the sound API is optional since some drivers can do this when probing or as part of SoC init. Mark it as such. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2019-02-20x86: ivybridge: Add a way to get the HDA config settingSimon Glass
Add a way check to whether HD audio is enabled. Use ioctl() to avoid adding too many unusual operations to PCH. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2019-02-20pch: Add ioctl supportSimon Glass
At present the PCH has 4 operations and these are reasonably widely used in the drivers. But sometimes we want to add rarely used operations, and each of these currently adds to the size of the PCH operations table. Add an ioctl() method which can be easily expanded without any more impact on the operations table. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2019-02-20pci: Add IDs for Intel high-definition audioSimon Glass
Add a few IDs for common HDA blocks and the ADSP used on samus. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2019-02-20pci: Fix comment in struct pci_child_platdataSimon Glass
This is platdata, not private data, so the comment is currently incorrect. Fix it to avoid confusion. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2019-02-20pci: Don't export pci_hose_config_device()Simon Glass
This function is not used outside this file so make it static. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2019-02-20log: Allow #define LOG_DEBUG to enable logging in a fileSimon Glass
At present it is possible to '#define DEBUG' at the top of a file which causes all debug() statements in that file to become active. There is currently no equivalent with logging, but this is a useful function. Add a LOG_DEBUG define along with documentation. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2019-02-20log: Fix up Kconfig log level namesSimon Glass
The log level numbers in the Kconfig are not actually correct. Fix them and also add a missing space in the header-file comment. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2019-02-19dm: Fix typo 'Watchdot' -> 'Watchdog'Chris Packham
Signed-off-by: Chris Packham <[email protected]>
2019-02-19ARM: am3517_evm: Enable Falcon ModeAdam Ford
The other OMAP3 based Logic PD boards have Falcon Mode enabled, so this patch makes it possible on the AM3517-evm as well. Signed-off-by: Adam Ford <[email protected]>
2019-02-19hikey: Allow environment to store in eMMC and increase bootdelayManivannan Sadhasivam
Current Hikey configuration allows us to store u-boot environment on uSD card. But this will be useless if uSD card is not inserted, hence use the onboard eMMC memory for storing environment at Boot1 partition. While we are at it, let's increase the boot delay to 10s also. Signed-off-by: Manivannan Sadhasivam <[email protected]>
2019-02-19spl: implement CRC check on U-Boot uImageSimon Goldschmidt
SPL currently does not check uImage CRCs when loading U-Boot. This patch adds checking the uImage CRC when SPL loads U-Boot. It does this by reusing the existing config option SPL_CRC32_SUPPORT to allow leaving out the CRC check on boards where the additional code size or boot time is a problem (adding the CRC check currently adds ~1.4 kByte to flash). The SPL_CRC32_SUPPORT config option now gets enabled by default if SPL support for legacy images is enabled to check the CRC on all boards that don't actively take countermeasures. Signed-off-by: Simon Goldschmidt <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2019-02-19configs: am57xx_evm: define CONFIG_SPL_LOAD_FIT_ADDRESS for SPL-DFUBin Liu
Define CONFIG_SPL_LOAD_FIT_ADDRESS to enable SPL-DFU for am57x platform. Signed-off-by: Bin Liu <[email protected]>
2019-02-19board/BuR/brxre1: convert do DMHannes Schmelzer
This commit converts the brxre1 board to DM, for this we have todo following things: - add a devicetree-file for this board - drop all obsolete settings from board header-file - use dm_i2c_xxx calls for read/write to the resetcontroller - request gpios before operate them Serues-cc: [email protected] Signed-off-by: Hannes Schmelzer <[email protected]>
2019-02-19armv8: layerscape: move CONFIG_LAYERSCAPE to KconfigRajesh Bhagat
Moves CONFIG_LAYERSCAPE for all NXP Layerscape platforms. Signed-off-by: Rajesh Bhagat <[email protected]> Reviewed-by: Prabhakar Kushwaha <[email protected]>
2019-02-19armv8: layerscape: move TZASC and TZPC configs to KconfigRajesh Bhagat
Moves FSL_TZASC_400 and FSL_TZPC_BP147 configs to Kconfig for LS1088A and LS2088A platforms. Signed-off-by: Rajesh Bhagat <[email protected]> Reviewed-by: Prabhakar Kushwaha <[email protected]>
2019-02-19QE: ls1043a: modify CONFIG_SYS_QE_FW_ADDR to (512*4A00) in SD CardZhao Qiang
Due to the new layout of Layerscape series, move the QE firmware to address (512*4A00) in SD Card. Signed-off-by: Zhao Qiang <[email protected]> Reviewed-by: Prabhakar Kushwaha <[email protected]>
2019-02-19armv8: ls1043ardb: Add the nand_bootcmd definitionWen He
nand_bootcmd doest not exist, it should be support for nand auto boot up. Signed-off-by: Wen He <[email protected]> Reviewed-by: Prabhakar Kushwaha <[email protected]>
2019-02-19lx2160aqds : Add support for LX2160AQDS platformPankaj Bansal
LX2160AQDS is a development board that supports LX2160A family SoCs. This patch add base support for this board. Signed-off-by: Wasim Khan <[email protected]> Signed-off-by: Sriram Dash <[email protected]> Signed-off-by: Pankaj Bansal <[email protected]> Signed-off-by: Udit Agarwal <[email protected]> [PK: Sqaush patch for "secure boot defconfig" & add maintainer] Signed-off-by: Prabhakar Kushwaha <[email protected]>
2019-02-19armv8: lx2160: Add secure boot target and enable distro boot.Udit Agarwal
Adds esbc validate command for verification of MC and DPC firmware, along with secure boot defconfig. Also enable distro boot. Signed-off-by: Udit Agarwal <[email protected]> Signed-off-by: Peng Ma <[email protected]> [PK: squash "enable DM support for SATA patch" & add maintainer] Signed-off-by: Prabhakar Kushwaha <[email protected]>
2019-02-19board/lx2160ardb: Add distro boot supportPriyanka Jain
Add u-boot enviroments to support distro boot which scan boot.scr from external storage devices (e.g. SD/USB/SCSI disk) and execute autoboot script Signed-off-by: Priyanka Jain <[email protected]> Reviewed-by: Prabhakar Kushwaha <[email protected]>
2019-02-19lx2160: Enable support of EMC2305Meenakshi Aggarwal
Enable support for FAN controller EMC2305 for LX2160A RDB board. Signed-off-by: Sriram Dash <[email protected]> Signed-off-by: Meenakshi Aggarwal <[email protected]> [PK: enable EMC2305 for lx2160rdb] Signed-off-by: Prabhakar Kushwaha <[email protected]>
2019-02-19armv8: lx2160ardb : Add support for LX2160ARDB platformPriyanka Jain
LX2160ARDB is an evaluation board that supports LX2160A family SoCs. This patch add base support for this board. Signed-off-by: Wasim Khan <[email protected]> Signed-off-by: Yogesh Gaur <[email protected]> Signed-off-by: Meenakshi Aggarwal <[email protected]> Signed-off-by: Vabhav Sharma <[email protected]> Signed-off-by: Sriram Dash <[email protected]> Signed-off-by: Rajesh Bhagat <[email protected]> Signed-off-by: Pankit Garg <[email protected]> Signed-off-by: Yinbo Zhu <[email protected]> Signed-off-by: Peng Ma <[email protected]> Signed-off-by: Chuanhua Han <[email protected]> Signed-off-by: Priyanka Jain <[email protected]> [PK: Sqaush patches from Yinbo Zhu, Peng Ma, Chuanhua Han and re-arrange defconfig] Signed-off-by: Prabhakar Kushwaha <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-06-28 11:49:36 +0000