| Age | Commit message (Collapse) | Author |
|---|
|
[linux commit 941214a512d8, modified for U-Boot by removing the
include of vmlinux.lds.h and replacing STRUCT_ALIGNMENT by 16.]
DTB files can be built into the kernel by converting them to assembly
files then assembling them into object files. We extend this here
for DTB overlays with the .dtso extensions.
We change the start and end delimiting tag prefix to make it clear that
this data came from overlay files.
Signed-off-by: Rasmus Villemoes <[email protected]>
|
|
This removes a number of duplicate newlines throughout the codebase.
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <[email protected]>
|
|
The EFI Capsule ESL file (EFI Signature List File) used for authentication
is a binary generated from the EFI Capsule public key certificate. Instead
of including it in the source repo, automatically generate it from the
certificate file during the build process.
Currently, sandbox is the only device using this, so removed its ESL file
and set the (new) CONFIG_EFI_CAPSULE_CRT_FILE config to point to its public
key certificate.
Signed-off-by: Jonathan Humphreys <[email protected]>
|
|
The call to cmd_capsule_esl_gen was made directly rather than using the
"cmd,xxx" syntax.
Fixes: c7d4dfcd ("scripts/Makefile.lib: Embed capsule public key in
platform's dtb")
Signed-off-by: Jonathan Humphreys <[email protected]>
|
|
The property isn't useful in VPL/SPL/TPL as it is only for U-Boot proper
pre-reloc, which has its own DTB.
Signed-off-by: Quentin Schulz <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
The changes upstream since the last sync (2ed1b242ab2
"scripts/setlocalversion: sync with linux 5.8") are
(5) 548b8b5168c9 scripts/setlocalversion: make git describe output more reliable
77a88274dc1a kbuild: replace LANG=C with LC_ALL=C
2a73cce2dad3 scripts/setlocalversion: remove mercurial, svn and git-svn supports
a2be76a352f1 scripts/setlocalversion: remove workaround for old make-kpkg
ffaf62a8050b scripts/setlocalversion: add more comments to -dirty flag detection
630ff0faf84e scripts/setlocalversion: factor out 12-chars hash construction
042da426f8eb scripts/setlocalversion: simplify the short version part
5df99bec210a scripts/setlocalversion: fix a bug when LOCALVERSION is empty
(1) 7d153696e5db kbuild: do not include include/config/auto.conf from shell scripts
(2) 129ab0d2d9f3 kbuild: do not quote string values in include/config/auto.conf
f6e09b07cc12 kbuild: do not put .scmversion into the source tarball
992ebfab2a75 setlocalversion: simplify the construction of the short version
75280bdf49b2 setlocalversion: make indentation shallower
(3) ec31f868ec67 setlocalversion: absorb $(KERNELVERSION)
eed36d775177 setlocalversion: clean up the construction of version output
(4) 6ab7e1f95e96 setlocalversion: use only the correct release tag for git-describe
05e96e96a315 kbuild: use git-archive for source package creation
3354c64d4184 scripts/setlocalversion: clean up stale comment
01e89a4acefc scripts/setlocalversion: also consider annotated tags of the form vx.y.z-${file_localversion}
The only thing U-Boot has been applying on top was to deal with not
sourcing include/config/auto.conf but instead using awk to extract the
right value. Commit (1) did a very similar thing upstream, so we no
longer need to do that. However, upstream then went a step further (2)
and changed the convention for what goes into auto.conf, so RHS no
longer contain double-quotes. That commit thus changed the sed pattern
to no longer match those quotes, but as U-Boot has not yet adopted
that change, we have to deal with that. In order to be a little
forward-compatible, I did that in a way that should work both ways:
# version string from CONFIG_LOCALVERSION
-config_localversion=$(sed -n 's/^CONFIG_LOCALVERSION=\(.*\)$/\1/p' include/config/auto.conf)
+config_localversion=$(sed -n 's/^CONFIG_LOCALVERSION=\(.*\)$/\1/p' include/config/auto.conf | tr -d '"')
Furthermore, (3) now requires that there is an appropriate
KERNELVERSION environment variable set. One way to deal with that
would be to just modify the script to use UBOOTVERSION instead, but
for now I've instead opted to let the Makefile provide
KERNELVERSION=$(UBOOTVERSION) to keep the setlocalversion changes
minimal.
That variable is further put to use in (4). Note that the logic for
mapping *VERSION -> [upstream annotated tag to look for] works
unchanged in U-Boot for the current versioning scheme 20XX.YY(-rcN)?.
My motivation for wanting to do this sync is to get (4) and (5), in
order to get the setlocalversion output both more predictable and
consistent across different build environments, i.e. independent of
random local .gitconfig settings, total number of git objects and/or
existence of unrelated tags (possibly from some tracked fork).
Signed-off-by: Rasmus Villemoes <[email protected]>
|
|
Since Python 3.12 unrecognised escape sequences trigger a SyntaxWarning.
Convert the '\#' string to a raw string so the backslash is correctly
used as a literal.
Ported from Linux commit dae4a0171e25 ("gen_compile_commands: fix invalid
escape sequence warning").
This updates the script to be in-line with Linux 6.9-rc6.
Signed-off-by: Caleb Connolly <[email protected]>
Reviewed-by: João Marcos Costa <[email protected]>
|
|
With all files that had included this file directly having been updated,
we can now remove this file.
Signed-off-by: Tom Rini <[email protected]>
|
|
This adjusts OF_UPSTREAM to behave more like the kernel by allowing for
all the devicetree files for a given vendor to be compiled. This is
useful for Qualcomm in particular as most boards are supported by a
single U-Boot build just provided with a different DT.
Signed-off-by: Caleb Connolly <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Tested-by: Neil Armstrong <[email protected]> # on Amlogic boards builds
|
|
When CONFIG_OF_UPSTREAM is enabled, DTS files are in SOC subdirectories (vs the
top level dts directory), but when CONFIG_EFI_CAPSULE_AUTHENTICATE is enabled,
the dynamically created dtsi file containing the capsule ESL DT node is in the
parent directory. This results in a build failure because the #include inserted
in the DTS file is local to the current directory. Update Makefile to have the
DT preprocessing of #includes search in the parent (dts top level) directory
too.
Signed-off-by: Jonathan Humphreys <[email protected]>
|
|
LDR format files are used primarily by Analog Devices processors but may
be of interest to other vendors. Previously support existed for this
format as part of the U-Boot build, but it has been unmaintained and
unused for a long time. In preparation for adding support for modern ADI
processors that use LDR, modernize the LDR support:
- Introduce CONFIG_LDR_CPU as the CPU string recognized by the LDR tool
may not be the same as CONFIG_CPU
- Add an SPL target that repackages u-boot-spl inside an LDR file
An almost identical target for packaging u-boot into an LDR file already
exists and did not need to be created.
Co-developed-by: Nathan Barrett-Morrison <[email protected]>
Signed-off-by: Nathan Barrett-Morrison <[email protected]>
Signed-off-by: Ian Roberts <[email protected]>
Signed-off-by: Greg Malysa <[email protected]>
|
|
With configs such as "am64x_evm_a53" or "imx8mp_venice" which list
multiple device trees to build we get a warning such as:
scripts/Makefile.spl:578: target 'spl/dts/freescale/' given more than once in the same rule
If we sort this list first the warning goes away.
Tested-by: Michal Simek <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Commit 2027e99e61aa ("Makefile: Run defconfig files through the C
preprocessor") adds `generated_defconfig' file, but fails to clean that
up. It might be useful to have that file around after `make' is done,
but it's better to clean that up on `make clean'. Also we probably want
to hide it in `git status' list. This patch makes the described changes,
and also adds `-P' parameter to the CPP command that produces the
`generated_defconfig' to avoid generating linemarkers.
Signed-off-by: Sam Protsenko <[email protected]>
Fixes: 2027e99e61aa ("Makefile: Run defconfig files through the C preprocessor")
Acked-by: Andrew Davis <[email protected]>
|
|
Prepare v2024.04-rc4
|
|
- Assorted MediaTek, ASPEED, xenguest, s5p4418 and qemu-arm fixes
- Assorted test fixes/updates/additions.
- A few bootstd/related fixes.
- Remove common.h from some files
- Drop reiserfs
- A few other assorted fixes throughout the tree.
|
|
Some boards that choose to utilize the OF_UPSTREAM directory for their
device tree files will need to specify that directory instead of the
traditional arch/$(ARCH)/dts/* path.
Include the correct path to the board's dtbs depending on if OF_UPSTREAM
is selected or not.
Signed-off-by: Bryan Brattlof <[email protected]>
Signed-off-by: Sumit Garg <[email protected]>
Tested-by: Fabio Estevam <[email protected]>
|
|
Prevent the error messages produced by which(1), such as the one quoted
below, from being visible in the build outputs.
which: no dtc in (./scripts/dtc)
This makes the build outputs look a tiny bit cleaner.
Signed-off-by: Dragan Simic <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
Once u-boot's build system invokes
python3 scripts/dtc/pylibfdt/setup.py --quiet build_ext --inplace
it may fail with
scripts/dtc/pylibfdt/setup.py:40: SyntaxWarning: invalid escape sequence '\w'
RE_KEY_VALUE = re.compile('(?P<key>\w+) *(?P<plus>[+])?= *(?P<value>.*)$')
depending on the used Python version.
Explicitly mark the regex string as raw string to avoid the warning.
Signed-off-by: Florian Schmaus <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Allow platforms to reuse DT headers and dtsi includes directly form
upstream DT subtree which will be frequently synced with Linux kernel.
This will further allow us to drop corresponding DT includes copy from
U-Boot tree.
Also, since the DT includes from upstream DT subtree are done after DT
includes from U-Boot tree, so it shouldn't cause any conflicts.
Tested-by: Bryan Brattlof <[email protected]>
Signed-off-by: Sumit Garg <[email protected]>
|
|
Allow u-boot to build DTB from a different directory tree such that
*-u-boot.dtsi files can be included from a common location. Currently
that location is arch/$(ARCH)/dts/, so statically define that common
location.
This is needed for platform owners to start building DTB files from
devicetree-rebasing directory but still being able to include
*-u-boot.dtsi files.
Reviewed-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Sumit Garg <[email protected]>
|
|
This adds the build infrastructure for checking DT binding schema
documents and validating dtb files using the binding schema. Here we use
devicetree-rebasing subtree to provide the DT bindings. Along with that
adapt dts/upstream/Bindings/Makefile to align with old U-Boot Kbuild
infrastructure.
Dependency:
-----------
The DT schema project must be installed in order to validate the DT schema
binding documents and validate DTS files using the DT schema. The DT schema
project can be installed with pip::
pip3 install dtschema
Note that 'dtschema' installation requires 'swig' and Python development
files installed first. On Debian/Ubuntu systems::
apt install swig python3-dev
Testing:
--------
Build dts files and check using DT binding schema:
$ make dtbs_check
Optionally, DT_SCHEMA_FILES can be passed in with a schema file(s) to
use for validation. This makes it easier to find and fix errors
generated by a specific schema.
Note, at this point dtbs_check is an optional build target as there are
many warnings generated due to custom DT properties used by many
platforms in u-boot. It is expected with these checks that compliance
with DT bindings to take place. Once that's done it can be added to CI
builds to remain compliant with DT bindings.
Reviewed-by: Simon Glass <[email protected]>
Tested-by: Simon Glass <[email protected]>
Signed-off-by: Sumit Garg <[email protected]>
|
|
It is possible to have a platform which does not require a board.h file
to build, but today we need an empty one for our generated config.h file
to be valid. Allow for omitting this file if CONFIG_SYS_CONFIG_NAME is
not set.
Signed-off-by: Tom Rini <[email protected]>
|
|
Adds support for assembly files and updates the LINE_PATTERN so it
supports both "cmd" and "savedcmd", which allows reverting the U-Boot
modification in commit 97fbb2eb016b ("scripts/gen_compile_commands.py:
adapt _LINE_PATTERN").
Upstream commits:
- 880946158b011 gen_compile_commands.py: fix path resolve with symlinks in it
- 9e56d3be4bfd2 gen_compile_commands: Sort output compile commands by file name
- 52c15e7e79285 gen_compile_commands: Allow the line prefix to still be cmd_
- 1c67921444bf6 gen_compile_commands: add assembly files to compilation database
Signed-off-by: Brandon Maier <[email protected]>
Cc: Joao Marcos Costa <[email protected]>
|
|
Penguin chiefs are actually stripped out from get_maintainer results unless
--git-chief-penguins is provided, which appends them to all results instead.
This is a issue for U-Boot since Tom Rini (penguin chief) is also maintainer
of some sub-trees ("ARM", "ARM TI" and "THE REST").
Hopefully, this match is performed case-senditive over name and email,
therefore upper-casing Tom Rini last name workarounds the issue.
Important note: This also fixes "THE REST" catch all section resulting
in Tom Rini listed as (maintainer:THE REST) for all files. Hope there is not
too much developers scripting their patch email header from get_maintainer.pl
output, otherwise Tom Rini may be flooded.
Cc: Tom Rini <[email protected]>
Signed-off-by: Anthony Loiseau <[email protected]>
|
|
This allows us to use some of the normal preprocessor directives inside
defconfig files. Such as #define and #include.
Signed-off-by: Andrew Davis <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Nishanth Menon <[email protected]>
|
|
Use this flag so that the bootph binding is obeyed correctly.
Add a comment about what is going on.
Signed-off-by: Simon Glass <[email protected]>
Fixes: https://source.denx.de/u-boot/custodians/u-boot-dm/-/issues/12
Reviewed-by: Tom Rini <[email protected]>
|
|
With sandbox, CONFIG_SANDBOX is y so the current rule ends up building
the devicetree for only those SPL builds where it is unwanted.
Correct the condition. This allows sandbox_vpl to produce a
u-boot-vpl.dtb file.
Fixes: e7fb789612e ("sandbox: Remove OF_HOSTFILE")
Signed-off-by: Simon Glass <[email protected]>
|
|
Prepare v2024.01-rc5
|
|
This is not a tool but it is handled by the script, so update the help
to include it.
Signed-off-by: Simon Glass <[email protected]>
|
|
The test_util module is actually imported by some tools, e.g. binman so
include it in the pip release.
The patman tool uses its test code when starting up, so keep that too.
Show a list of deleted files so it is clear what is happening.
Signed-off-by: Simon Glass <[email protected]>
|
|
The current build system embeds the EFI Signature List(ESL)
into the dtb to be used in the EFI capsule authentication.
This ESL file is specified through the CONFIG_EFI_CAPSULE_ESL_FILE
Kconfig option. If CONFIG_EFI_CAPSULE_ESL_FILE is not specified,
U-boot build ends up with failure but the cause of failure is not
easily understandable. Current error message is as follows.
FATAL ERROR: Error reading file into data: Is a directoryCheck /home/ubuntu/src/ledge/u-boot/arch/arm/dts/.synquacer-sc2a11-developerbox.dtb.pre.tmp for errors
make[2]: *** [scripts/Makefile.lib:355: arch/arm/dts/synquacer-sc2a11-developerbox.dtb] Error 1
make[1]: *** [dts/Makefile:44: arch-dtbs] Error 2
make: *** [Makefile:1165: dts/dt.dtb] Error 2
make: *** Waiting for unfinished jobs....
This commit shows the error message that CONFIG_EFI_CAPSULE_ESL_FILE
must be specified when the EFI capsule authentication is enabled, then
terminate the build with error.
Signed-off-by: Masahisa Kojima <[email protected]>
Reviewed-by: Weizhao Ouyang <[email protected]>
|
|
Replace instances of http://www.ti.com with https://www.ti.com
Signed-off-by: Nishanth Menon <[email protected]>
|
|
Update U-Boot's version of scripts/get_maintainer.pl to sync it up with
the latest changes to the Linux kernel's version of the same script.
The last sync was with Linux kernel version v5.13-rc6. The commits to
the kernel's get_maintainer.pl since then (starting with the most
recent) are:
11fb48961e52 get_maintainer: Honor mailmap for in file emails
26d98e9f78da get_maintainer: don't remind about no git repo when --nogit is used
Signed-off-by: Tom Rini <[email protected]>
|
|
At this point in time we should not add common.h to any new files, so
make checkpatch.pl complain.
Signed-off-by: Tom Rini <[email protected]>
Signed-off-by: Simon Glass <[email protected]>
|
|
Replace mentions to 'kernel' by 'U-Boot' to avoid confusion.
Signed-off-by: Joao Marcos Costa <[email protected]>
Tested-by: Joao Paulo Goncalves <[email protected]>
|
|
This documentation briefly explains what is a compilation database,
and how to use the script to generate one.
This is not a portage, as there was no original documentation in the
Linux sources.
Acknowledge the documentation in the script's header and in doc/build
index.
Signed-off-by: Joao Marcos Costa <[email protected]>
Tested-by: Joao Paulo Goncalves <[email protected]>
|
|
Add acknowledgments for porting and modifying the script. Of course, the
license, author, and copyright notice remain the same as in the original
script.
Signed-off-by: Joao Marcos Costa <[email protected]>
Tested-by: Joao Paulo Goncalves <[email protected]>
|
|
The referred tool is now in U-Boot. Replace "the Linux kernel" by
"U-Boot" to make the docstring coherent.
Signed-off-by: Joao Marcos Costa <[email protected]>
Tested-by: Joao Paulo Goncalves <[email protected]>
|
|
For U-Boot's context, the regular expression defined by _LINE_PATTERN
should be adapted. Replace 'savedcmd' by 'cmd'.
Signed-off-by: Joao Marcos Costa <[email protected]>
Tested-by: Joao Paulo Goncalves <[email protected]>
|
|
This script generates a database of compiler flags, namely
compile_commands.json. It is quite useful for text editors that use
clangd LSP (e.g. Vim, Neovim).
It was ported from Linux's sources:
- tag: v6.4
- revision 6995e2de6891c724bfeb2db33d7b87775f913ad1
Modifications for U-Boot compatibility will be added in a follow-up
commit.
Signed-off-by: Joao Marcos Costa <[email protected]>
Tested-by: Joao Paulo Goncalves <[email protected]>
|
|
Have checkpatch.pl skip warnings for use of fdtdec_* functions in
ooling; livetree isn't used there.
Signed-off-by: Lars Feyaerts <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
It is entirely possible at this point to have platforms in U-Boot that
do not have board-specific C code (just Kconfig or environment) and so
make it optional to have to descend in to and then build in the board
directory.
Signed-off-by: Tom Rini <[email protected]>
|
|
When building in a portage chroot, we do not have the environment needed
to build pylibfdt. It is instead build as a separate package.
Provide a build option to tell U-Boot to skip this part of the build. We
still need it to use binman, etc. but don't need it to build its
dependencies.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Mike Frysinger <[email protected]>
[s/build bytes/builds bytes in tools.rst]
Signed-off-by: Bin Meng <[email protected]>
|
|
The current event spy is always passed the event context and the event.
The context is always NULL for a static spy. The event is not often used.
Introduce a 'simple' spy which takes no arguments. This allows us to drop
the adaptation code that many of these spy records use.
Update the event script to find these in the image.
Signed-off-by: Simon Glass <[email protected]>
|
|
The EFI capsule authentication logic in u-boot expects the public key
in the form of an EFI Signature List(ESL) to be provided as part of
the platform's dtb. Currently, the embedding of the ESL file into the
dtb needs to be done manually.
Add a target for generating a dtsi file which contains the signature
node with the ESL file included as a property under the signature
node. Include the dtsi file in the dtb. This brings the embedding of
the ESL in the dtb into the U-Boot build flow.
The path to the ESL file is specified through the
CONFIG_EFI_CAPSULE_ESL_FILE symbol.
Signed-off-by: Sughosh Ganu <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
At the time of building the DTB, some dtsi files can be selected for
inclusion. Have these dtsi files as dependencies for the DTB
target. This also ensures generation or updating the dtsi files if
need be.
Signed-off-by: Sughosh Ganu <[email protected]>
Acked-by: Ilias Apalodimas <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
At the time of building a device-tree file, all the *u-boot.dtsi files
are looked for, in a particular order, and the first file found is
included. Then, the list of files specified in the
CONFIG_DEVICE_TREE_INCLUDES symbol are included.
Combine these files that are to be included into a variable, and then
include all these files in one go.
Signed-off-by: Sughosh Ganu <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Acked-by: Ilias Apalodimas <[email protected]>
|
|
Add support to config fragments (.config) located in the /board
directory. This will allow only base defconfigs to live in /configs and
all fragments to live in their respective device directory in /board/..
Signed-off-by: Jason Kacines <[email protected]>
|
|
dtc_cpp_flags
Currently, all in-tree .dts files (apart from some under test/ and
tools/), reside in arch/$ARCH/dts. However, in the linux kernel tree,
dts files for arm64 boards, and probably in the not too distant
future [1], arm boards as well, live in subdirectories of that.
For private forks, using a vendor or project subdirectory is also more
convenient to clearly separate private code from upstream - in the
same way that code under board/ is also split and easy to maintain.
In order to prepare for us to follow suit and do the splitting of the
in-tree .dts files, and to make life a little easier for private forks
that already place dts files not directly in arch/$ARCH/dts, change
the $(srctree)/arch/$(ARCH)/dts path to instead refer to the directory of
the .dts file being compiled. This should be a no-op for all existing
cases.
[1] https://lore.kernel.org/lkml/[email protected]/
Signed-off-by: Rasmus Villemoes <[email protected]>
|
