summaryrefslogtreecommitdiff
path: root/scripts
AgeCommit message (Collapse)Author
2021-10-15configs: Resync with savedefconfigTom Rini
Resync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2021-10-15Convert CONFIG_USB_EHCI_IS_TDI to KconfigMarek Behún
On mvebu this is defined if and only if !ARM64. Otherwise it is defined for boards with ARCH_MX23, ARCH_TEGRA and ARCH_ZYNQ, and also for SOC_AR934X (tplink_wdr4300). Signed-off-by: Marek Behún <[email protected]>
2021-10-15Drop CONFIG_USB_EHCI_KIRKWOODMarek Behún
This config option doesn't do anything. nas220 uses USB_EHCI_MARVELL. Signed-off-by: Marek Behún <[email protected]>
2021-10-15Convert CONFIG_USB_EHCI_MXS to KconfigMarek Behún
This option is only used for mx23evk_defconfig mx23_olinuxino_defconfig which are the only i.MX23 boards. Add depend on ARCH_MX23 and default to y. Signed-off-by: Marek Behún <[email protected]>
2021-10-15Rename CONFIG_EHCI_IS_TDI to CONFIG_USB_EHCI_IS_TDIMarek Behún
In preparation for moving this option to Kconfig, rename it to be consistent with other USB EHCI Kconfig options. Signed-off-by: Marek Behún <[email protected]>
2021-10-15Remove unused CONFIG_CONS_NONEPatrick Delaunay
Remove the latest reference of CONFIG_CONS_NONE in code Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2021-10-15Remove unused CONFIG_SYS_FLASH_AMD_CHECK_DQ7Patrick Delaunay
Remove the latest reference of CONFIG_SYS_FLASH_AMD_CHECK_DQ7 in code Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2021-10-15Remove unused CONFIG_NO_RELOCATIONPatrick Delaunay
Remove the latest reference of CONFIG_NO_RELOCATION in code Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2021-10-15am33x: Remove unused define CONFIG_MUSB_HOSTPatrick Delaunay
This define was left over from a previous revision, and was never used. Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2021-10-15scripts: remove some configs in config_whitelist.txtPatrick Delaunay
Remove some config finishing by _ badly added by scripts/build-whitelist.sh when joker is used in comments. for example: doc/uImage.FIT/command_syntax_extensions.txt: ... #ifdef CONFIG_OF_* | ... cmd/nvedit.c:# error Define one of CONFIG_ENV_IS_IN_{EEPROM| \ FLASH|MMC|FAT|EXT4|\ Remove also configs only used in comments: - CONFIG_BOOGER in include/linux/kconfig.h - CONFIG_COMMANDS - CONFIG_INIT_IGNORE_ERROR - CONFIG_REG_* - CONFIG_HOTPLUG : drivers/watchdog/omap_wdt.c:18 Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Simon Glass <[email protected]> Tested-by: Simon Glass <[email protected]>
2021-10-12Merge tag 'u-boot-stm32-20211012' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-stm - Disable ATAGS for STM32 MCU and MPU boards - Disable bi_boot_params for STM32 MCU and MPU boards - Update stm32-usbphyc node management - Convert CONFIG_STM32_FLASH to Kconfig for STM32 MCU boards - Convert some USB config flags to Kconfig for various boards - Convert CONFIG_BOOTCOMMAND flag to Kconfig for STM32 F429 board - Remove specific CONFIG_STV0991 flags - Remove unused CONFIG_USER_LOWLEVEL_INIT flag - Add ofdata_to_platdata() callback for stm32_spi driver - Update for stm32f7_i2c driver - Remove gpio_hog_probe_all() from STM32 MP1 board - Fix bind command Signed-off-by: Tom Rini <[email protected]>
2021-10-08pm9263: Remove unused CONFIG_USER_LOWLEVEL_INITPatrick Delaunay
Remove the latest reference of CONFIG_USER_LOWLEVEL_INIT in code Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2021-10-08stv0991: remove specific CONFIG_STV0991 configsPatrick Delaunay
Remove the following STV0991 specific configs: - CONFIG_STV0991 (never used, only defined in CONFIG_SYS_EXTRA_OPTIONS) - CONFIG_STV0991_HZ (replaced by generic CONFIG_SYS_HZ) - CONFIG_STV0991_HZ_CLOCK (replaced by generic CONFIG_SYS_HZ_CLOCK) This patch allows to reduce the file config_whitelist.txt. Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2021-10-08Convert CONFIG_STM32_FLASH to KconfigPatrick Delaunay
This converts the CONFIG_STM32_FLASH to Kconfig by using tools/moveconfig.py Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2021-10-06Merge branch '2021-10-06-assorted-improvements'Tom Rini
- Use better values for ACPI OEM_VERSION - Assorted NAND related Kconifg migrations and another dependency fix
2021-10-06Convert CONFIG_SYS_NAND_5_ADDR_CYCLE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_NAND_5_ADDR_CYCLE Signed-off-by: Tom Rini <[email protected]>
2021-10-06Convert CONFIG_SYS_NAND_PAGE_COUNT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_NAND_PAGE_COUNT Signed-off-by: Tom Rini <[email protected]>
2021-10-04Merge branch 'next'Tom Rini
Signed-off-by: Tom Rini <[email protected]>
2021-09-30WS cleanup: remove SPACE(s) followed by TABWolfgang Denk
Signed-off-by: Wolfgang Denk <[email protected]>
2021-09-30WS cleanup: remove trailing white spaceWolfgang Denk
Signed-off-by: Wolfgang Denk <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2021-09-30WS cleanup: remove trailing empty linesWolfgang Denk
Signed-off-by: Wolfgang Denk <[email protected]>
2021-09-29Merge branch 'network_master' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-net into next - Fix some non-NULL terminated strings in the networking subsystem - net: tsec: Mark tsec_get_interface as __maybe_unused
2021-09-28scripts: ensure the cocci script for miiphy_register does not leak the MDIO busVladimir Oltean
When mdio_register fails, mdio_free should be called on the mdiodev that was previously allocated with mdio_alloc. Signed-off-by: Vladimir Oltean <[email protected]>
2021-09-28scripts: ensure the cocci script for miiphy_register does not leave ↵Vladimir Oltean
NULL-unterminated strings strncpy() simply bails out when copying a source string whose size exceeds the destination string size, potentially leaving the destination string unterminated. One possible way to address is to pass MDIO_NAME_LEN - 1 and a previously zero-initialized destination string, but this is more difficult to maintain. The chosen alternative is to use strlcpy(), which properly limits the copy len in the (srclen >= size) case to "size - 1", and which is also more efficient than the strncpy() byte-by-byte implementation by using memcpy. The destination string returned by strlcpy() is always NULL terminated. Signed-off-by: Vladimir Oltean <[email protected]>
2021-09-28mtd: remove SPEAr flash driver st_smiPatrick Delaunay
Remove the driver st_smic.c used in SPEAr products and the associated config CONFIG_ST_SMI; this driver is no more used in U-Boot after the commit 570c3dcfc153 ("arm: Remove spear600 boards and the rest of SPEAr support"). Fixes: 570c3dcfc153 ("arm: Remove spear600 boards and the rest of SPEAr support") Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Stefan Roese <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2021-09-28scripts/mailmapper: enable running with Python 3Heinrich Schuchardt
Our mailmapper script required Python 2 which is no longer maintained. A main difference when converting to Python 3 is that byte strings are not character strings. So add conversion and skip over conversion errors. Signed-off-by: Heinrich Schuchardt <[email protected]>
2021-09-27Merge tag 'dm-pull-next-27sep21' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-dm into next Various of-platdata improvements, including CONFIG_OF_REAL
2021-09-27Merge tag 'v2021.10-rc5' into nextTom Rini
Prepare v2021.10-rc5
2021-09-25fdt: Update Makefile rules with the new OF_REAL KconfigSimon Glass
Simplify some of the Makefile rules using this Kconfig. Signed-off-by: Simon Glass <[email protected]>
2021-09-24Avoid polluting CONFIG_ namespace with board specific define.Kristian Amlie
Signed-off-by: Kristian Amlie <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2021-09-24mtd: remove SPEAr flash driver st_smiPatrick Delaunay
Remove the driver st_smic.c used in SPEAr products and the associated config CONFIG_ST_SMI; this driver is no more used in U-Boot after the commit 570c3dcfc153 ("arm: Remove spear600 boards and the rest of SPEAr support"). Fixes: 570c3dcfc153 ("arm: Remove spear600 boards and the rest of SPEAr support") Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Stefan Roese <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2021-09-24scripts/mailmapper: enable running with Python 3Heinrich Schuchardt
Our mailmapper script required Python 2 which is no longer maintained. A main difference when converting to Python 3 is that byte strings are not character strings. So add conversion and skip over conversion errors. Signed-off-by: Heinrich Schuchardt <[email protected]>
2021-09-21net: remove unused CONFIG_DRIVER_AT91EMAC_*Eugen Hristev
AT91EMAC driver is unused, thus removing. Signed-off-by: Eugen Hristev <[email protected]> Reviewed-by: Ramon Fried <[email protected]>
2021-09-21board: pm926x: remove unused CONFIG_SYS_AT91_CPU_NAMEEugen Hristev
CONFIG_SYS_AT91_CPU_NAME looks to be unused. Remove it and remove it from config_whitelist.txt Signed-off-by: Eugen Hristev <[email protected]>
2021-09-16scripts/config_whitelist.txt: Fix after mergingTom Rini
CONFIG_SPIFLASH is manually re-added as it is not a new symbol, but now only exists in CONFIG_SYS_EXTRA_OPTIONS. Signed-off-by: Tom Rini <[email protected]>
2021-09-16Merge tag 'v2021.10-rc4' into nextTom Rini
Prepare v2021.10-rc4 Signed-off-by: Tom Rini <[email protected]> # gpg: Signature made Tue 14 Sep 2021 06:58:32 PM EDT # gpg: using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C # gpg: Good signature from "Thomas Rini <[email protected]>" [ultimate] # Conflicts: # board/Arcturus/ucp1020/spl.c # cmd/mvebu/Kconfig # common/Kconfig.boot # common/image-fit.c # configs/UCP1020_defconfig # configs/sifive_unmatched_defconfig # drivers/pci/Kconfig # include/configs/UCP1020.h # include/configs/sifive-unmatched.h # lib/Makefile # scripts/config_whitelist.txt
2021-09-14configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2021-09-13pci: Drop PCI_INDIRECT_BRIDGESimon Glass
This does not work with driver model so can be removed. Signed-off-by: Simon Glass <[email protected]>
2021-09-13ppc: Remove UCP1020 boardSimon Glass
This board has not been converted to CONFIG_DM_PCI by the deadline. Remove it. Note that we have to add CONFIG_SPIFLASH to scripts/config_whitelist.txt because it's not really migrated at this point. Acked-by: Michael Durrant <[email protected]> Acked-by: Oleksandr Zhadan <[email protected]> Acked-by: Oleksandr Zhadan and Michael Durrant <[email protected]> Signed-off-by: Simon Glass <[email protected]> [trini: Handle CONFIG_SPIFLASH differently and delete Kconfig file] Signed-off-by: Tom Rini <[email protected]>
2021-09-04net: Rename SPL_NET_SUPPORT to SPL_NETSimon Glass
Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <[email protected]>
2021-09-04i2c: Convert CONFIG_POWER_I2C et al to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_POWER_I2C CONFIG_POWER_LEGACY They are handled at the same time due to a dependency between them. Update the Makefile rule to use legacy power only in U-Boot proper. Unfortunately a separate rule is needed in SPL to be able to build legacy power. Add SPL related symbols for both, to allow for SPL-only usage. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Jaehoon Chung <[email protected]> [trini: More SPL related cleanups, reword commit message] Signed-off-by: Tom Rini <[email protected]>
2021-09-04power: Rename CONFIG_POWER to CONFIG_POWER_LEGACYSimon Glass
This option is used in pre-driver model code and much of it has never been converted to driver model. We want to add a new option to enable power support, so we can use a simple rule in the Makefile. Rename this one, which is really about a particular implementation of power. Also update the pmic.h header file so it either includes the legacy API or the driver model one. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Jaehoon Chung <[email protected]>
2021-09-04Convert CONFIG_DMA_LPC32XX to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_DMA_LPC32XX Signed-off-by: Simon Glass <[email protected]>
2021-09-01scripts/checkpatch.pl: Resync with v5.13Tom Rini
This resyncs us with the version found in v5.13 of the Linux kernel with the following exceptions: - Keep our u-boot specific tests / code area. - Change the location of checkpatch.rst (which we now import) - Drop the "use strscpy" test as we don't have that, but do have strlcpy and want that used now. - Keep debug/printf in the list for $logFunctions And note that we now also include the spdxcheck.py tool that checkpatch.pl supports calling out to, and include upstream's checkpatch.rst in our develop section of the documentation. Signed-off-by: Tom Rini <[email protected]>
2021-08-31Merge branch '2021-08-31-kconfig-migrations-part2' into nextTom Rini
- Further CONFIG to Kconfig migrations - Some DDR related symbols - CONFIG_SYS_LOAD_ADDR moved, loadaddr always set in environment now. - Finish MX7D, convert IMX_CONFIG - Some RAMBOOT related options - L1 cache size converted and named consistently for all arches. A further follow-up to rename things for even better clarity is welcome. - CONFIG_SKIP_LOWLEVEL_INIT, CONFIG_SYS_MALLOC_LEN
2021-08-31Convert CONFIG_SKIP_LOWLEVEL_INIT et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SKIP_LOWLEVEL_INIT CONFIG_SKIP_LOWLEVEL_INIT_ONLY In order to do this, we need to introduce SPL and TPL variants of these options so that we can clearly disable these options only in SPL in some cases, and both instances in other cases. Signed-off-by: Tom Rini <[email protected]>
2021-08-31Convert CONFIG_RAMBOOT_PBL et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_RAMBOOT_PBL CONFIG_SYS_FSL_PBL_PBI CONFIG_SYS_FSL_PBL_RCW Signed-off-by: Tom Rini <[email protected]>
2021-08-30Merge branch '2021-08-30-kconfig-migrations-part1' into nextTom Rini
- Begin merging some Kconfig migration, and CONFIG namespace cleanup series in. This gives us: - A number of I2C symbols migrated over - DWC2, i8042, altera_spi and a few other areas updated to use CFG not CONFIG for the concept of "configuration space" defines. - Rename CONFIG_EXTRA_ENV_BOARD_SETTINGS to EXTRA_ENV_BOARD_SETTINGS - Some dead code removal. - Rename a number of CONFIG symbols that were only referenced within the config header to not use CONFIG as a prefix.
2021-08-30Convert CONFIG_SYS_I2C_LEGACY to Kconfig and add CONFIG_[ST]PL_SYS_I2C_LEGACYTom Rini
First, we convert CONFIG_SYS_I2C_LEGACY to Kconfig. Next, as you cannot have SYS_I2C_LEGACY and DM_I2C at the same time, introduce CONFIG_SPL_SYS_I2C_LEGACY so that we can enable the legacy option only in SPL. Finally, for some PowerPC cases we also need CONFIG_TPL_SYS_I2C_LEGACY support. Convert all of the existing users to one or more symbols. Signed-off-by: Tom Rini <[email protected]>
2021-08-30Convert CONFIG_ID_EEPROM to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ID_EEPROM Signed-off-by: Tom Rini <[email protected]>
generated by cgit v1.2.3 (git 2.25.1) at 2026-04-13 06:18:35 +0000