| Age | Commit message (Collapse) | Author |
|---|
|
The pytest vboot does all his tests on fit without padding.
We add the same tests on fit with padding.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Philippe Reynes <[email protected]>
|
|
We don't need 5KB to test things out. A smaller size makes it easier to
look at the FIT with fdtdump.
Signed-off-by: Simon Glass <[email protected]>
|
|
This code is repeated so move it into a function with a parameter.
Signed-off-by: Simon Glass <[email protected]>
|
|
Fix various minor things noticed by pylint.
Signed-off-by: Simon Glass <[email protected]>
|
|
Fix some long lines and comments. Use a distinct name for the
'required key' test.
Signed-off-by: Simon Glass <[email protected]>
|
|
This test is actually made up of five separate tests. Split them out so
that they appear as separate tests.
Unfortunately this restarts U-Boot multiple times which adds about a
second to the already-long vboot test, about 8 seconds total on my
machine. We could add a special 'teardown' test afterwards but if the
tests are executed out of order that would not work.
Changing test_vboot into a class causes it not to be discovered and makes
it different from all other tests.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a check to make sure that it is not possible to add a new
configuration and use the hashed nodes and hash of another configuration.
Signed-off-by: Simon Glass <[email protected]>
|
|
This tool only uses the last -k parameter provided. Drop the earlier one
since it has no effect.
Signed-off-by: Simon Glass <[email protected]>
|
|
This commit add a test in the vboot test to check that
when a required key is asked, only FIT signed with this
key is used/accepted by u-boot.
Signed-off-by: Philippe Reynes <[email protected]>
|
|
This update the its file used in vboot test to respect the new
node style name defined in doc/uImage.FIT (for example: replace
kernel@1 by kernel and fdt@1 by fdt-1)
Signed-off-by: Philippe Reynes <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
The padding pss is now supported for rsa signature.
This add test with padding pss on vboot test.
Signed-off-by: Philippe Reynes <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
The old 'sb' command was deprecated in 2015 and replaced with 'host'.
Remove the remaining users and the command, so that the name is available
for other purposes.
Signed-off-by: Simon Glass <[email protected]>
|
|
|
|
This adds a new config value FIT_SIGNATURE_MAX_SIZE, which controls the
max size of a FIT header's totalsize field. The field is checked before
signature checks are applied to protect from reading past the intended
FIT regions.
This field is not part of the vboot signature so it should be sanity
checked. If the field is corrupted then the structure or string region
reads may have unintended behavior, such as reading from device memory.
A default value of 256MB is set and intended to support most max storage
sizes.
Suggested-by: Simon Glass <[email protected]>
Signed-off-by: Teddy Reed <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
The openssl command specified in test_with_algo() ultimately ends up
being run by RunAndLog::run(), which uses it to construct a Popen object
with the default shell=False. The stderr redirect in the command is
therefore simply passed to openssl as an argument. With at least openssl
1.1.0f this causes openssl, and therefore test_vboot, to fail with:
genpkey: Use -help for summary.
Exit code: 1
Any stderr output ought to be captured & stored in the RunAndLog
object's output field and returned from run() via run_and_log() to
test_with_algo() which then ignores it anyway, so we can drop the
shell-like redirection with no ill effects. With this fix test_vboot now
passes for me.
Signed-off-by: Paul Burton <[email protected]>
Reviewed-by: Stephen Warren <[email protected]>
|
|
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.
In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.
This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.
Signed-off-by: Tom Rini <[email protected]>
|
|
Some tests use external tools (executables) during their operation. Add
a test.py mark to indicate this. This allows those tests to be skipped if
the required tool is not present.
Signed-off-by: Stephen Warren <[email protected]>
|
|
Make sure that when we're telling bootm to boot an image, and we expect
the image to boot we get the output from sandbox that we attempted to
run Linux and that U-Boot completed its job.
Cc: Simon Glass <[email protected]>
Cc: Stephen Warren <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Acked-by: Stephen Warren <[email protected]>
|
|
Return one string for each command that was executed. This seems cleaner.
Suggested-by: Teddy Reed <[email protected]>
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Stephen Warren <[email protected]>
|
|
Add a proper function for this rather than using internal functions. Use it
in the single call site.
Also, do a restart at the end of the vboot test to reset to the normal
device tree.
Signed-off-by: Simon Glass <[email protected]>
Suggested-by: Stephen Warren <[email protected]>
|
|
Use 'cons.log.section' feature to split up the test output. This makes it
easier to read.
Suggested-by: Stephen Warren <[email protected]>
Signed-off-by: Simon Glass <[email protected]>
|
|
Rename this argument and pass it to each function that needs it, instead of
making it global.
Suggested-by: Stephen Warren <[email protected]>
Suggested-by: Teddy Reed <[email protected]>
Signed-off-by: Simon Glass <[email protected]>
|
|
Instead of this, use the existing run_and_log() function, enhanced to
support a command string as well as a list of arguments.
Suggested-by: Stephen Warren <[email protected]>
Signed-off-by: Simon Glass <[email protected]>
|
|
Fix some typos in various files introduced with the vboot test conversion.
Reported-by: Teddy Reed <[email protected]>
Signed-off-by: Simon Glass <[email protected]>
|
|
Fix review comments that were missed at the time. Also explain why we need
to regenerate the device tree for each test.
Reported-by: Teddy Reed <[email protected]>
Suggested-by: Stephen Warren <[email protected]>
Signed-off-by: Simon Glass <[email protected]>
Fixes: f6349c3c (test: Add a README)
|
|
Getting this error:
Zynq> sb load hostfs - 100
/home/monstr/data/disk/u-boot/build-zynq_zc706/test.fit
Unknown command 'sb' - try 'help'
because sb command is present only for Sandbox
obj-$(CONFIG_SANDBOX) += host.o
that's why mark this test to be run only at Sandbox
Signed-off-by: Michal Simek <[email protected]>
Acked-by: Simon Glass <[email protected]>
|
|
Without this, the test fails if the test is run with a cwd other than the
root of the U-Boot source tree.
Fixes: 8729d582595d ("test: Convert the vboot test to test/py")
Signed-off-by: Stephen Warren <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Now that we have a suitable test framework we should move all tests into it.
The vboot test is a suitable candidate. Rewrite it in Python and move the
data files into an appropriate directory.
Signed-off-by: Simon Glass <[email protected]>
|
