| Age | Commit message (Collapse) | Author |
|---|
|
Add a test to test_efi_loader.py similar to the TFTP test but for HTTP
with the wget command.
Suggested-by: Tom Rini <[email protected]>
Signed-off-by: Jerome Forissier <[email protected]>
Tested-by: Tom Rini <[email protected]>
Reviewed-by: Peter Robinson <[email protected]>
|
|
test_efi_helloworld_net() and test_efi_grub_net() depend on
cmd_tftpboot so add the missing annotations.
Reported-by: Tom Rini <[email protected]>
Signed-off-by: Jerome Forissier <[email protected]>
Reviewed-by: Peter Robinson <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
If env__pxe_boot_test_skip is not present, it defaults to True not
False. Therefore fix the comment.
Signed-off-by: Jerome Forissier <[email protected]>
Reviewed-by: Peter Robinson <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
When running the bootstage tests currently we get a warning like:
tests/test_bootstage.py::test_bootstage_stash
...PytestReturnNotNoneWarning: Expected None, but tests/test_bootstage.py::test_bootstage_stash returned (37748736, 4096), which will be an error in a future version of pytest. Did you mean to use `assert` in stead of `return`?
This is because the unstash test will run the stash test and fetch the
addr / size from that. Rework the test to be stash and unstash and then
run the unstash command at the end of the current stash test.
Acked-by: Michal Simek <[email protected]>
Reviewed-by: Love Kumar <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Simon Glass <[email protected]> says:
This series includes the patches needed to make make the EFI 'boot' test
work. That test has now been split off into a separate series along with
the EFI patches.
This series fixes these problems:
- sandbox memory-mapping conflict with PCI
- the fix for that causes the mbr test to crash as it sets up pointers
instead of addresses for its 'mmc' commands
- the mmc and read commands which cast addresses to pointers
- a tricky bug to do with USB keyboard and stdio
- a few other minor things
|
|
Tidy up most of these warnings. Remaining are four of these:
R0914: Too many local variables
which can only by fixed by splitting things into functions, so that is
left for another time.
Part of this change was done by the flynt tool.
Signed-off-by: Simon Glass <[email protected]>
|
|
Migrate sandbox over to generating it's capsule update image GUIDs
dynamically from the namespace and board/image info. Update the
reference and tests to use the new GUIDs.
Acked-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
If erase/write/read size is 0 then it throws the mentioned error message
when debug message ie enabled as per 899fb5aa8bec ("cmd: sf/nand: Print
and return failure when 0 length is passed"), setting it to None as
debug message is not enabled by default for testing.
Signed-off-by: Love Kumar <[email protected]>
|
|
Add test cases for sf commands to verify various SPI flash operations
such as erase, write and read. It also adds qspi lock unlock cases.
This test relies on boardenv_* configurations to run it for different
SPI flash family such as single SPI, QSPI, and OSPI.
Signed-off-by: Love Kumar <[email protected]>
|
|
Now that sandbox_vpl supports UPL, add a test that checks that the
payload can be loaded by SPL and the handoff information passed through
to U-Boot proper.
Signed-off-by: Simon Glass <[email protected]>
|
|
Use the sandbox_vpl build to test UPL since it supports a real devicetree
in SPL. The sandbox_spl build uses OF_PLATDATA.
Enable writing the UPL handoff in SPL and reading it in U-Boot proper.
Provide a test to check that this handoff works.
Note that the test uses the standard devicetree rather than the test one,
since it is a lot smaller and fits in the existing bloblist.
Signed-off-by: Simon Glass <[email protected]>
|
|
Mattijs Korpershoek <[email protected]> says:
Android boot flow is a bit different than a regular Linux distro.
Android relies on multiple partitions in order to boot.
A typical boot flow would be:
1. Parse the Bootloader Control Block (BCB, misc partition)
2. If BCB requested bootonce-bootloader, start fastboot and wait.
3. If BCB requested recovery or normal android, run the following:
a. Get slot (A/B) from BCB
b. Run AVB (Android Verified Boot) on boot partitions
c. Load boot and vendor_boot partitions
d. Load device-tree, ramdisk and boot
The AOSP documentation has more details at [1], [2], [3]
This has been implemented via complex boot scripts such as [4].
However, these boot script are neither very maintainable nor generic.
Moreover, DISTRO_DEFAULTS is being deprecated [5].
Add a generic Android bootflow implementation for bootstd.
For this initial version, only boot image v4 is supported.
This has been tested on sandbox using:
$ ./test/py/test.py --bd sandbox --build -k test_ut
This has also been tested on the AM62X SK EVM using TI's Android SDK[6]
To test on TI board, the following (WIP) patch is needed as well:
https://gitlab.baylibre.com/baylibre/ti/ti-u-boot/-/commit/84cceb912bccd7cdd7f9dd69bca0e5d987a1fd04
[1] https://source.android.com/docs/core/architecture/bootloader
[2] https://source.android.com/docs/core/architecture/partitions
[3] https://source.android.com/docs/core/architecture/partitions/generic-boot
[4] https://source.denx.de/u-boot/u-boot/-/blob/master/include/configs/meson64_android.h
[5] https://lore.kernel.org/r/all/[email protected]/
[6] https://software-dl.ti.com/processor-sdk-android/esd/AM62X/09_02_00/docs/android/Overview.html
|
|
Rasmus Villemoes <[email protected]> says:
This is a followup to the patches that landed in 2024.01 and nearly
made sure that source files for producing .dtbo files use the .dtso
extension. In the same release, a few new .dts files snuck in, and
there was also some test code involving .dtbo -> .dtbo.S -> .dtbo.o I
didn't really know how to handle at the time. This should finish the
job, bring us in sync with linux (at least in this respect), and drop
the .dts -> .dtbo build rule.
|
|
Add a unit test for testing the Android bootmethod.
This requires another mmc image (mmc7) to contain the following partitions:
- misc: contains the Bootloader Control Block (BCB)
- boot_a: contains a fake generic kernel image
- vendor_boot_a: contains a fake vendor_boot image
Also add BOOTMETH_ANDROID as a dependency on sandbox so that we can test
this with:
$ ./test/py/test.py --bd sandbox --build -k test_ut # build the mmc7.img
$ ./test/py/test.py --bd sandbox --build -k bootflow_android
Signed-off-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Julien Masson <[email protected]>
Reviewed-by: Guillaume La Roque <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Distinguish more clearly between source files meant for producing .dtb
from those meant for producing .dtbo.
Note that in the linux tree, all device tree overlay sources have been
renamed to .dtso, and the .dts->.dtbo rule is gone since v6.5 (commit
81d362732bac). So this is also a step towards staying closer to linux
with respect to both Kbuild and device tree sources, and eventually
eliminating all .dts -> .dtbo instances.
This also matches the documentation update done in commit 4fb7e570d6b.
Cc: Masahisa Kojima <[email protected]>
Signed-off-by: Rasmus Villemoes <[email protected]>
|
|
The tests we currently have expect the firmware update to fail
when OsIndications is not set properly. However, we have a Kconfig flag
that explicitly ignores that variable. Adjust the tests accordingly
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
The build option to support images of type 'IMAGE_FORMAT_LEGACY' is
CONFIG_LEGACY_IMAGE_FORMAT so update the pytest to check for the correct
option.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
On tests which require "tftpboot" we need to depend not on cmd_net but
rather cmd_tftpboot. And on tests which require cmd_pxe we do not need
to also depend on cmd_net as this should be handled already via Kconfig
logic.
Signed-off-by: Tom Rini <[email protected]>
|
|
The current test doesn't check anything about the output. If a bug
results in junk before the output, this is not currently detected.
Add a check for the first line being the one expected.
Signed-off-by: Simon Glass <[email protected]>
|
|
When a driver is not registered properly it is not clear which one it
is. Adjust test_dm_compat() to show this.
Signed-off-by: Simon Glass <[email protected]>
|
|
This setting pads out the function names. Adjust the test to handle
this, since some boards use it.
Signed-off-by: Simon Glass <[email protected]>
|
|
Tests for standard boot need disks to be set up, which can only be done
on sandbox, since adjusting disks on real hardware is not currently
supported. Mark the init function as sandbox-only.
Signed-off-by: Simon Glass <[email protected]>
|
|
The relocation offset can change in some initcall sequences. Handle
this and make sure it is used for all debugging statements in
init_run_list()
Update the trace test to match.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Caleb Connolly <[email protected]>
|
|
Some versions of trace-cmd (or some machines?) show one less dot in the
CPU list.
Signed-off-by: Simon Glass <[email protected]>
|
|
Prepare v2024.07-rc5
|
|
Add tests for booting image using tftpboot/pxe boot commands, tftpboot
boot case loads the FIT image into DDR and boots using bootm command
whereas pxe boot cases downloads the pxe configuration file from the
TFTP server and interprets it to boot the images mentioned in the pxe
configurations file.
This test relies on boardenv_* containing configuration values including
the parameter 'pattern'. tftpboot/pxe boot cases boots the Linux till the
boot log pattern value is matched. For example, if the parameter
'pattern' is defined as 'login:', it will boot till login prompt.
Signed-off-by: Love Kumar <[email protected]>
Tested-by: Tom Rini <[email protected]>
|
|
According to UEFI v2.10 spec section 8.2.6, if a caller invokes the
SetVariables() service, it will produce a digest from hash(VariableName,
VendorGuid, Attributes, TimeStamp, DataNew_variable_content), then the
firmware that implements the SetVariable() service will compare the
digest with the result of applying the signer’s public key to the
signature. For EFI variable append write, efitools sign-efi-sig-list has
an option "-a" to add EFI_VARIABLE_APPEND_WRITE attr, and u-boot will
drop this attribute in efi_set_variable_int(). So if a caller uses
"sign-efi-sig-list -a" to create the authenticated variable, this append
write will fail in the u-boot due to "hash check failed".
This patch resumes writing the EFI_VARIABLE_APPEND_WRITE attr to ensure
that the hash check is correct. And also update the "test_efi_secboot"
test case to compliance with the change.
Signed-off-by: Weizhao Ouyang <[email protected]>
|
|
For pcr_read and pcr_extend commands allow the digest algorithm to be
specified by an additional argument. If not specified it will default to
SHA256 for backwards compatibility.
Additionally update test_tpm2.py for the changes in output in pcr_read
which now shows the algo and algo length in the output.
A follow-on to this could be to extend all PCR banks with the detected
algo when the <digest_algo> argument is 'auto'.
Signed-off-by: Tim Harvey <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
The image is not unloaded if a security violation occurs.
If efi_set_load_options() fails, we do not free the memory allocated for
the optional data. We do not unload the image.
* Unload the image if a security violation occurs.
* Free load_options if efi_set_load_options() fails.
* Unload the image if efi_set_load_options() fails.
Fixes: 53f6a5aa8626 ("efi_loader: Replace config option for initrd loading")
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
Add read/write tests for optee_rpmb cmd.
Signed-off-by: Igor Opaniuk <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
Fix typos in test_eficonfig.py: %s/curren/current/
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Igor Opaniuk <[email protected]>
|
|
Using uclass_get_name() reduces the code size.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Currently, all the capsules for the sandbox platform are generated at
the time of running the capsule tests. To showcase generation of
capsules through binman, generate all raw(non FIT payload) capsules
needed for the sandbox platform as part of the build. This acts as an
illustrative example for generating capsules as part of a platform's
build.
Make corresponding change in the capsule test's configuration to get
these capsules from the build directory.
Signed-off-by: Sughosh Ganu <[email protected]>
|
|
Add a test for reset commands which performs resetting of CPU, It does
COLD reset by default and WARM reset with -w option.
Signed-off-by: Love Kumar <[email protected]>
|
|
Add test case for saveenv command in non-JTAG bootmode which saves the
u-boot environment variables in persistent storage.
Signed-off-by: Love Kumar <[email protected]>
|
|
Abort the dhcp request in the middle by pressing ctrl + c on u-boot
prompt and validate the abort status.
Signed-off-by: Love Kumar <[email protected]>
|
|
Move SPDX license identifiers to the first line, so it conforms
to license placement rule [1]:
Placement:
The SPDX license identifier in kernel files shall be added at the first
possible line in a file which can contain a comment. For the majority
of files this is the first line, except for scripts which require the
'#!PATH_TO_INTERPRETER' in the first line. For those scripts the SPDX
identifier goes into the second line.
[1] https://www.kernel.org/doc/Documentation/process/license-rules.rst
Reviewed-by: Mattijs Korpershoek <[email protected]>
Signed-off-by: Igor Opaniuk <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
Add a following test cases for scsi commands:
scsi_reset - To reset SCSI controller
scsi_info - To show available SCSI devices
scsi_scan - To (re-)scan SCSI bus
scsi_device - To show or set surrent device
scsi_part - To print partition table of selected SCSI device
Signed-off-by: Love Kumar <[email protected]>
|
|
Add the test cases for usb commands to test its various functionality
such as start, stop, reset, info, tree, storage, dev, part, ls, load,
and save. It also adds different file systems cases such as fat32, ext2
and ext4.
Signed-off-by: Love Kumar <[email protected]>
|
|
Add the test cases for mmc commands to test its various functionality
such as mmc list, dev, info, rescan, part, ls, load, and save. It also
adds different file systems cases such as fat32, ext2 and ext4.
Signed-off-by: Love Kumar <[email protected]>
|
|
Add test cases to verify the different type of secure boot images loaded
at DDR location for AMD's ZynqMP SoC. It also adds tests authentication
and decryption functionality using AES and RSA features for Zynq.
Signed-off-by: Love Kumar <[email protected]>
|
|
Add gpio pins generic test for the set of gpio pin list to test various
gpio related functionality, such as the input, set, clear, and toggle,
it also tests the input and output functionality for shorted gpio pins.
This test depends on boardenv* configuration to define gpio pins names.
Signed-off-by: Love Kumar <[email protected]>
|
|
Add testcases for loading RPU applications in split and lockstep mode
including the negative one for AMD's ZynqMP SoC.
Signed-off-by: Love Kumar <[email protected]>
|
|
Provide a unit test for the smbios command.
Provide different test functions for QEMU, sandbox, and other systems.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
Add test cases for bootstage command to print the bootstage report, to
stash the data into memory and to unstash the data from memory.
Signed-off-by: Love Kumar <[email protected]>
|
|
With commit 42c0e5bb054d ("test: Find leftovers after clean/mrproper")
we assume that we are performing out of tree builds. test_clean and
test_mrproper fail if the assumption isn't met.
However there are valid scenarios where tests run with in source builds
(i.e., test.py --build-dir=.).
Automatically skip cleanup tests in such scenarios to prevent false
positives.
Signed-off-by: Tobias Deiminger <[email protected]>
Reviewed-by: Harald Seiler <[email protected]>
|
|
In practice, as this test defaults to enabled rather than disabled, too
many platforms now fail.
This reverts commit d8364738623ff47dd2321dd68da310abb58fe861.
Signed-off-by: Tom Rini <[email protected]>
|
|
With newer versions of trace-cmd the report subcommand will have
different output from before if we do or do not pass -l. However, with
the -l flag passed our put is consistent here. This updates our regular
expressions and comments for this as well now.
Signed-off-by: Tom Rini <[email protected]>
|
|
Add the following memory tests:
memtest_negative - To test mtest command by providing incorrect inputs
memtest_ddr - To test memory write-read-comparision for DDR memory
Signed-off-by: Love Kumar <[email protected]>
|
|
Add below test cases for i2c commands:
i2c_bus - To show i2c bus info,
i2c_dev - To set or show the current bus,
i2c_probe - To probe the i2c device,
i2c_eeprom - To test i2c eeprom device,
i2c_probe_all_buses - To list down all the buses and probes it
Signed-off-by: Love Kumar <[email protected]>
|
