| Age | Commit message (Collapse) | Author |
|---|
|
https://source.denx.de/u-boot/custodians/u-boot-dfu
u-boot-dfu-20260116
CI: https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/29018
Android:
* Fix missing dependency for BOOTMETH_ANDROID
* Add bootconfig support
* Add 'get ramdisk' command to abootimg
DFU:
* Improve error handling in dfu_fill_entity()
USB Gadget:
* ci_udc: Ensure ci_ep->desc is valid before using it
* ci_udc: Add additional debug prints
|
|
Add test to verify that androidboot.* parameters are correctly extracted
from bootargs and appended to the bootconfig section when using
'abootimg get ramdisk' with boot image v4 and vendor_boot image.
The test verifies:
- androidboot.* parameters are removed from bootargs
- They are appended to the bootconfig section in the ramdisk
- Non-androidboot parameters remain in bootargs
- The bootconfig trailer is properly updated
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Guillaume La Roque (TI.com) <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[mkorpershoek: dropped whitespace changes from original patch]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
David Lechner <[email protected]> says:
While trying to run the test suite for the first time, I encountered a
few minor issues. Here are a few patches to address them.
Link: https://lore.kernel.org/r/20260105-a-few-test-py-improvements-v3-0-fea38243ca5b@baylibre.com
|
|
Set ubconfig to None and add a check in the show_timings() function of
test/py/test.py to ensure that the global ubconfig variable was actually
initialized before access attributes.
If tests fail early, e.g. because --build failed, ubconfig may not have
been initialized yet and results in an exception in an atexit handler.
Adding this check avoids unnecessary noise in the output.
Exception ignored in atexit callback: <function cleanup at 0x7de475ea6b60>
Traceback (most recent call last):
File "u-boot/test/py/conftest.py", line 669, in cleanup
show_timings()
File "u-boot/test/py/conftest.py", line 616, in show_timings
if ubconfig.timing:
^^^^^^^^
NameError: name 'ubconfig' is not defined
Tested-by: Mattijs Korpershoek <[email protected]> # sandbox
Reviewed-by: Mattijs Korpershoek <[email protected]>
Signed-off-by: David Lechner <[email protected]>
|
|
We should avoid overwhelming users with non-essential messages.
The message 'Starting the controller' is not written for EHCI.
We should not write it for XHCI either.
Adjust the Python test accordingly.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
|
|
Add support for converting single-copy environment to redundant environment.
In case CRC checks on both redundant environment copies fail, try one more
CRC check on the primary environment copy and treat it as single environment.
If that check does pass, rewrite the single-copy environment into redundant
environment format, indicate the environment is valid, and import that as
usual primary copy of redundant environment. Follow up 'env save' will then
store two environment copies and the system will continue to operate as
regular redundant environment system.
Add test which validates this upgrade path. The test starts with spi.bin
which is pre-populated as single-copy environment and then upgrades that
environment to dual-copy environment.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Add test for environment stored in SPI NOR. The test works in a very
similar way to the current test for environment stored in ext4 FS,
except it generates spi.bin file backing the SPI NOR.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Prepare v2026.01-rc5
|
|
The GitHub dependabot tool has reported a "medium" priority bug
CVE-2025-68146, with this package. Update to the patched version.
Reported-by: GitHub dependabot
Signed-off-by: Tom Rini <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-dfu into next
u-boot-dfu-next-20251211:
CI: https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/28724
Android:
* Fix 8-byte alignment for newer versions of libfdt
|
|
This series from Marek Vasut <[email protected]> cleans up some of
the FIT pytests we have and then extends mkimage to support including
the TEE in FIT images when using "-f auto" to create the resulting FIT.
Link: https://lore.kernel.org/r/[email protected]
|
|
Introduce two new parameters to be used with mkimage -f auto to bundle
TEE image into fitImage, using auto-generated fitImage. Add -z to specify
TEE file name and -Z to specify TEE load and entry point address. This is
meant to be used with systems which boot all of TEE, Linux and its DT from
a single fitImage, all booted by U-Boot.
Example invocation:
"
$ mkimage -E -A arm -C none -e 0xc0008000 -a 0xc0008000 -f auto \
-d arch/arm/boot/zImage \
-b arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dtb \
-z ../optee_os/out/arm-plat-stm32mp1/core/tee-raw.bin \
-Z 0xde000000 \
/path/to/output/fitImage
"
Documentation update and test are also included, the test validates
both positive and negative test cases, where fitImage does not include
TEE and does include TEE blobs.
Acked-by: Quentin Schulz <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
|
|
Introduce generate_and_check_fit_image() and call it with various
parameters to test various configurations of the fitImage. This is
identical to the existing test, expect for the code duplication.
Reviewed-by: Quentin Schulz <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
|
|
Newer versions of libfdt strictly check whether the FDT blob
passed to them is at 8-byte aligned offset, if it is not, then
the library fails checks with -FDT_ERR_ALIGNMENT . Currently,
'abootimg get dtb --index=1 addr size' may return non 8-byte
aligned FDT address which points directly into the abootimg.
Copy the result into temporary location before validation to
avoid FDT alignment check failure.
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
Heinrich Schuchardt <[email protected]> says:
Many C unit tests are not executed if CONFIG_CONSOLE_RECORD is not set.
Hence Tom suggested to let UNIT_TEST imply CONSOLE_RECORD.
The first patch makes the skipped C unit tests visible.
The rest of the series deals with hidden bugs in our tests.
The 'fdt get value' command returned incorrect values on low-endian
systems. So this needed fixing too.
Link: https://lore.kernel.org/r/[email protected]
|
|
We invoke the ut command in test_ut.py. Currently we only check for
failures. Instead we should also indicate if sub-tests were skipped.
With this change we will get output like the following for skipped tests:
test/py/tests/test_ut.py ..sssss......ss..............s.sssss.s.s...
================================ short test summary info ================================
SKIPPED [1] test/py/tests/test_ut.py:597: Test addrmap addrmap_test_basic has 1 skipped sub-test(s).
SKIPPED [1] test/py/tests/test_ut.py:597: Test bdinfo bdinfo_test_eth has 4 skipped sub-test(s).
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
The 'extension' test would set 'extension_overlay_addr' variable to
decimal 4096 due to conversion in python. The 'extension_overlay_addr'
is however sampled using env_get_hex("extension_overlay_addr", 0);
which converts the 4096 to 0x4096 and uses that as DT overlay address,
which is unaligned. Fix this by setting extension_overlay_addr to 0x1000
as intended, which is aligned.
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
|
|
Support for using "u-boot,dm-..." rather than "bootph-..." has been
deprecated since February 2023. Any platforms using this have had a
console message saying to migrate by 2023.07. Go and remove all support
here now, for the v2026.01 release.
The results of this change that aren't clear from the above are that we
still have a checkpatch.pl error message, and document in
doc/develop/spl.rst that they have been migrated since 2023. We also
change the key2dtsi.py tool to use the correct bootph phase rather than
the legacy phase.
Signed-off-by: Tom Rini <[email protected]>
|
|
The general python documentation for the subprocess class recommends
that run() be used in all cases that it can handle. What we do in
RunAndLog is simple enough that run() is easy to switch to. In fact,
looking at this exposed a problem we have today, which is that we had
combined stdout and stderr but then looked at both stdout and stderr as
if they were separate. Stop combining them.
Signed-off-by: Tom Rini <[email protected]>
|
|
Add test cases to validate FDT and TPM eventlog handoff from TF-A
and OP-TEE via bloblist.
For FDT, the nodes 'reserved-memory' and 'firmware' appended by
OP-TEE indicates a successful handoff.
For TPM eventlog, the events 'SECURE_RT_EL3', 'SECURE_RT_EL1_OPTEE'
and 'SECURE_RT_EL1_OPTEE_EXTRA1' created by TF-A indicates a
successful handoff.
Signed-off-by: Raymond Mao <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Our pytest package was pinned to a release from 2021. The minimum
compatible with labgrid v25.0.x is pytest 7.0.0. Update to the current
relase which is currently 8.4.2
Signed-off-by: Tom Rini <[email protected]>
|
|
The EFI secure boot tests install a security data base.
Other EFI tests assume that secure boot is not enabled.
Add the missing tear-down at the end of each secboot test sequence.
Reported-by: Tom Rini <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
Tested-by: Tom Rini <[email protected]>
|
|
and fix related test/DTS issues""
This reverts commit 4d84fa1261eb27d57687f2e4c404a78b8653c183, reversing
changes made to b82a1fa7ddc7f3be2f3b75898d5dc44c34420bdd.
I had missed some feedback on this series from earlier, and we have
since had reports of regressions due to this as well. For now, revert
this.
Signed-off-by: Tom Rini <[email protected]>
|
|
related test/DTS issues"
Aristo Chen <[email protected]> says:
This patch series enhances FIT image robustness by adding **memory
region overlap detection** to `mkimage` and fixing existing overlaps
in DTS files and `binman` tests.
The primary goal is to prevent runtime memory corruption from
conflicting load addresses in FIT images.
Key Changes:
1. `mkimage` Overlap Detection: A new validation in
`tools/fit_image.c` checks for overlapping load addresses
within FIT configurations. `mkimage` now errors out with
detailed info on conflicts, preventing bad FIT image creation.
2. New Test Case: A Python test verifies the new detection.
It intentionally creates an overlap (kernel and FDT)
to confirm correct error handling.
3. Fixes for Existing Overlaps:
* Board DTS (k3-am6xx): Adjusted load addresses for TI
firmware stubs to prevent conflicts. This resolves
previously undetected overlaps.
* `binman` Tests: Fixed several tests. U-Boot load
addresses were shifted to avoid ATF conflicts. A new
linker script for TEE ELF sections ensures distinct
memory layouts.
4. Documentation: Added guidance for developers on how to
determine ELF load addresses using readelf, linker scripts,
and objdump when working with binman FIT images.
Impact:
This series improves FIT image reliability by catching overlaps
at build time, helping developers resolve issues before runtime
failures.
Link: https://lore.kernel.org/r/[email protected]
|
|
Add a new test case to verify that mkimage properly detects and reports
memory region overlaps in FIT image configurations.
The test creates a FIT image with kernel and FDT components that have
the same load address (0x40000), which should trigger the overlap
detection logic and cause mkimage to fail with an appropriate error
message.
Test verifies:
- mkimage returns non-zero exit code when overlap is detected
- Error message contains "Error: Overlap detected:"
- Error message identifies the specific overlapping components
(kernel@1 and fdt@1)
This test ensures the overlap detection feature works correctly and
prevents deployment of FIT images with conflicting memory layouts
that could cause runtime failures.
Signed-off-by: Aristo Chen <[email protected]>
|
|
Introduce two new parameters to be used with mkimage -f auto to bundle
TFA BL31 image into fitImage, using auto-generated fitImage. Add -y to
specify TFA BL31 file name and -Y to specify TFA BL31 load and entry
point address. This is meant to be used with systems which boot all of
TFA BL31, Linux and its DT from a single fitImage, all booted by U-Boot.
Example invocation:
"
$ mkimage -E -A arm64 -C none -e 0x50200000 -a 0x50200000 -f auto \
-d arch/arm64/boot/Image \
-b arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dtb \
-y ../tfa/build/rcar_gen4/release/bl31.bin -Y 0x46400000 \
/path/to/output/fitImage
"
Documentation update and test are also included, the test validates
both positive and negative test cases, where fitImage does not include
TFA BL31 and does include TFA BL31 blobs.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Capsule updates tests have been skipped since
commit 659f97eb1fc3 ("scripts/Makefile.lib: EFI: Use capsule CRT instead of ESL file")
Remove that check since it's not needed anymore and re-enable the tests.
Fixes: 659f97eb1fc3 ("scripts/Makefile.lib: EFI: Use capsule CRT instead of ESL file")
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
efi_capsule_data() is called in each of the EFI tests to create and
setup the files we need. However, it also recreates the spi.bin file
that holds the SPI flash contents we rely on for the test validation.
This leads to weird errors since reading from the flash returns 0,
instead of the expected value if the file has been recreated.
Always restart our sandbox instance if the files are recreated.
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
The current code writes values to a flash offset defined by a function
argument. However, when reading it back we always read from a static
offset. Adjust the reads to use the correct offset.
Signed-off-by: Ilias Apalodimas <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Some capsule tests are changing the sandbox DT to test various features,
e.g authenticated capsule updates, versioning support etc. However, no one
restores the original DT and the CI pops errors looking like
/u-boot
Bloblist at 100 not found (err=-2)
Failed to find FDT file '/tmp/sandbox/persistent-data/scratch/EFI/CapsuleTestData/test_ver.dtb'
initcall_run_f(): initcall fdtdec_setup() failed
if sandbox is restarted.
So let's restore the proper DT after done with the capsule testing.
Signed-off-by: Ilias Apalodimas <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Both of these tests are only valid for sandbox (and require dtc) so both
tests need the pytest annotations.
Fixes: 93d09d3bd8ea ("test: fit: add test case for invalid default configuration reference")
Signed-off-by: Tom Rini <[email protected]>
|
|
Recent changes to mkimage introduced a validation step to ensure that
the 'default' property under the /configurations node in a FIT image
references a valid configuration subnode. If the referenced node is
missing, mkimage will now return an error.
This patch adds a Python test case to verify that mkimage correctly
fails when the 'default' configuration does not exist. The test creates
a minimal ITS with an invalid default reference and checks that mkimage
produces the expected error message.
Signed-off-by: Aristo Chen <[email protected]>
|
|
Add option to disable help command in size constrained systems to save some
space. There is also no need to have ifdefs around CMDLINE because all
commands depends on it.
And also mark cmd_help dependency in test_help.py.
Reviewed-by: Peter Robinson <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
Link: https://lore.kernel.org/r/c17f825fb8a74e1d1912a3fd09a9a880c84a8bfd.1751286059.git.michal.simek@amd.com
|
|
Newer versions of python will emit a TypeError about not enough
arguments for a format string:
FAILED ub/test/py/tests/test_mmc.py::test_mmc_dev - TypeError: not enough arguments for format string
FAILED ub/test/py/tests/test_mmc.py::test_mmcinfo - TypeError: not enough arguments for format string
FAILED ub/test/py/tests/test_mmc.py::test_mmc_info - TypeError: not enough arguments for format string
FAILED ub/test/py/tests/test_mmc.py::test_mmc_rescan - TypeError: not enough arguments for format string
FAILED ub/test/py/tests/test_mmc.py::test_mmc_part - TypeError: not enough arguments for format string
Add parentheses around all multi argument format strings so all
arguments will be passed to the format string
Signed-off-by: Bryan Brattlof <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Heinrich Schuchardt <[email protected]> says:
The sandbox is used for a lot of generic development, we should run the
UEFI tests there, too.
The TPM emulation on the sandbox is incomplete. Disable the TCG test on
sandbox.
Link: https://lore.kernel.org/r/[email protected]
|
|
The TPM emulation on the sandbox is incomplete.
Even basic tcg2 functionality like get_capability() fails:
lib/efi_selftest/efi_selftest_tcg2.c(886):
ERROR: get_manufacturer_id buffer too small failed
Reviewed-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
|
|
Aristo Chen <[email protected]> says:
This series introduces a validation step in mkimage to ensure that all image
names referenced under the /configurations node of a FIT source (ITS) are
actually defined under the /images node.
### Motivation
When using mkimage to build FIT images, it's easy to mistakenly reference
nonexistent image nodes in configurations (e.g., referencing a missing `fdt` or
`firmware` node). Such issues are often not caught until runtime in U-Boot.
This series aims to catch these errors early during FIT image creation by
validating the configuration references in mkimage itself.
Link: https://lore.kernel.org/r/[email protected]
|
|
Add a test case to verify that mkimage correctly rejects a FIT source
that references a non-existent image from a configuration node.
This test introduces a minimal ITS that defines a valid kernel image
but references a missing "fdt" image under the /configurations section.
The test asserts that mkimage fails with a clear error message, as
introduced in the new validation logic.
This helps ensure the validation logic behaves correctly and prevents
regressions in future FIT enhancements.
Signed-off-by: Aristo Chen <[email protected]>
|
|
Prepare v2025.07-rc5
With this merge, tighten up the LTO_FLAGS removal we added to not
trigger on ARMv7 (which is Thumb-2 and should be fine).
|
|
Add sandbox test on gpt command with partition type for known type.
Signed-off-by: Patrick Delaunay <[email protected]>
Reviewed-by: Patrice Chotard <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-dfu into next
u-boot-dfu-next-20250616
CI: https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/26704
Usb gadget:
- Fix ti_musb driver in gadget mode (with DM_USB_GADGET)
DFU:
- mmc/scsi backends when using 10 or more partitions
|
|
If an Unexpected exception is thrown in a test, an undefined variable
error is reported. Fix this.
Signed-off-by: Simon Glass <[email protected]>
Fixes: 85d7dae377a ("test: Detect dead connections")
Reviewed-by: Mattijs Korpershoek <[email protected]>
|
|
If a BootFail exception is thrown in a test, it is not handled
correctly. Use the correct fixture variable 'ubman_fix' to resolve this.
Signed-off-by: Simon Glass <[email protected]>
Fixes: d9ed4b75add ("test/py: Drop u_boot_ prefix on test files")
Reviewed-by: Mattijs Korpershoek <[email protected]>
|
|
These tests have been failing for some months. Disable them so that a CI
run can pass on coral. Further work will be needed to see how to make
them pass.
Signed-off-by: Simon Glass <[email protected]>
Acked-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
These don't seem to be needed.
Add a few notes about what to do next. Also mention parallel tests in
at the top of thefile.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
Some of the Python tests are a pain because they don't reset the TPM
state before each test. Driver model tests do this, so convert the
tests to C.
This means that these tests won't run on real hardware, but we have
tests which do TPM init, so there is still enough coverage.
Rename and update the Python tpm_init test to use 'tpm autostart',
since this fully initializes the TPM and performs the self tests.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
Adjust network tests to run with CONFIG_NET_LWIP=y.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Acked-by: Jerome Forissier <[email protected]>
|
|
In some cases we have alternative configuration options that supply the
same functionality, e.g CONFIG_NET and CONFIG_NET_LWIP.
Allow to specify all of them as arguments for buildconfigspec() and execute
the text if any of these is fulfilled, e.g.
@pytest.mark.buildconfigspec('net', 'net_lwip')
Update the documentation.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Acked-by: Jerome Forissier <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add tests to check initrd and dtb loading
Signed-off-by: Adriano Cordova <[email protected]>
|
|
Add this test to the documentation. No changes to the test itself were
required.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
