| Age | Commit message (Collapse) | Author |
|---|
|
There is missing dependency on echo command. Mark tests which requires
echo.
Signed-off-by: Michal Simek <[email protected]>
Reviewed-by: Stephen Warren <[email protected]>
|
|
Add test case for new interface set_invert().
Signed-off-by: Kever Yang <[email protected]>
Acked-by: Simon Glass <[email protected]>
Fix typo in subject and build error in sandbox_pwm_set_invert():
Signed-off-by: Simon Glass <[email protected]>
|
|
Those tests check:
- the ability for a phy-user to get a phy based on its name or its index
- the ability of a phy device (provider) to manage multiple ports
- the ability to perform operations on the phy (init,deinit,on,off)
- the behavior of the uclass when optional operations are not implemented
Signed-off-by: Jean-Jacques Hiblot <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
This is a simple uclass for Watchdog Timers. It has four operations:
start, restart, reset, stop. Drivers must implement start, restart and
stop operations, while implementing reset is optional: It's default
implementation expires watchdog timer in one clock tick.
Signed-off-by: Maxim Sloyko <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Unfortunately a test for the PWM uclass was not included when it was
submitted. This was noticed when trying to add more functionality:
http://patchwork.ozlabs.org/patch/748172/
Add a simple test to get us started.
Signed-off-by: Simon Glass <[email protected]>
|
|
Allow LEDs to be blinked if the driver supports it. Enable this for
sandbox so that the tests run.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Ziping Chen <[email protected]>
|
|
Add support for toggling an LED into the uclass interface. This can be
efficiently implemented by the driver.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Ziping Chen <[email protected]>
|
|
It is useful to be able to read the LED as well as write it. Add this to
the uclass and update the GPIO driver.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Ziping Chen <[email protected]>
|
|
At present this is very simple, supporting only on and off. We want to
also support toggling and blinking. As a first step, change the name of
the main method and use an enum to indicate the state.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Ziping Chen <[email protected]>
|
|
Add a test for the correct device removal. Currently two different ways
for device removal are supported:
- Normal device removal via the device_remove() API
- Removal via selective device driver flags (DM_FLAG_ACTIVE_DMA)
This new test "remove_active_dma" adds tests cases for those both ways
of removal. This is done by adding a new test driver, which has this
flag set.
Signed-off-by: Stefan Roese <[email protected]>
Cc: Simon Glass <[email protected]>
|
|
This patch adds the flags parameter to device_remove() and changes all
calls to this function to provide the default value of DM_REMOVE_NORMAL
for "normal" device removal.
This is in preparation for the driver specific pre-OS (e.g. DMA
cancelling) remove support.
Signed-off-by: Stefan Roese <[email protected]>
Cc: Simon Glass <[email protected]>
Acked-by: Simon Glass <[email protected]>
|
|
* Add note that execution needs Python development package installed
* Standardize on upper case "FIT", "FDT" as necessary for clarity
* Fix "tempoerary", "linex" typos
Signed-off-by: Robert P. J. Day <[email protected]>
|
|
At present devices use a simple integer offset to record the device tree
node associated with the device. In preparation for supporting a live
device tree, which uses a node pointer instead, refactor existing code to
access this field through an inline function.
Signed-off-by: Simon Glass <[email protected]>
|
|
We have all the building blocks now to run arbitrary efi applications
in travis. The most important one out there is grub2, so let's add
a simple test to verify that grub2 still comes up.
Signed-off-by: Alexander Graf <[email protected]>
|
|
Today we can compile a self-contained hello world efi test binary that
allows us to quickly verify whether the EFI loader framwork works.
We can use that binary outside of the self-contained test case though,
by providing it to a to-be-tested system via tftp.
This patch separates compilation of the helloworld.efi file from
including it in the u-boot binary for "bootefi hello". It also modifies
the efi_loader test case to enable travis to pick up the compiled file.
Because we're now no longer bloating the resulting u-boot binary, we
can enable compilation always, giving us good travis test coverage.
Signed-off-by: Alexander Graf <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Now that we have working network tests and a hello world efi application
built inside our tree, we can automatically test that efi binary running
inside of U-Boot.
Signed-off-by: Alexander Graf <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
The network test currently downloads files at 0MB offset of RAM start.
This works for most ARM systems, but x86 has weird memory layout constraints
on the first MB of RAM.
To not get caught into any of these, let's add a 4MB pad from start
of RAM to the default memory offset.
Signed-off-by: Alexander Graf <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
After the latest changes, ext4 no longer has any fails.
Signed-off-by: Stefan Brüns <[email protected]>
Acked-by: Stephen Warren <[email protected]>
|
|
If a test uses a fixture which is expensive to setup, the fixture can
possibly created with session or module scope. As u_boot_console has
function scope, it can not be used in this case.
Signed-off-by: Stefan Brüns <[email protected]>
Acked-by: Stephen Warren <[email protected]>
|
|
In pytest 3, runtestprotocol() may not call pytest_runtest_setup() if
the test is skipped. That call is required to create a section for the
test in the log file. If this is skipped, the call to log.end_section()
at the tail of pytest_runtest_protocol() will throw an exception. This
patch ensures that a log section always exists, both to avoid the
exception and to ensure that a consistently structured log file is
always created.
Cc: Stefan Brüns <[email protected]>
Reported-by: Stefan Brüns <[email protected]>
Signed-off-by: Stephen Warren <[email protected]>
Tested-by: Tom Rini <[email protected]>
|
|
We can only run this command if the sleep command is enabled and that
depends on CONFIG_CMD_MISC
Signed-off-by: Tom Rini <[email protected]>
|
|
|
|
These have now landed upstream. The naming is different and in one case the
function signature has changed. Update the code to match.
This applies the following upstream commits by
Thierry Reding <[email protected]> :
604e61e fdt: Add functions to retrieve strings
8702bd1 fdt: Add a function to get the index of a string
2218387 fdt: Add a function to count strings
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a NFS download test, based on TFTP test.
Tested on i.MX6 SabreLite board.
Signed-off-by: Guillaume GARDET <[email protected]>
Cc: Tom Rini <[email protected]>
Cc: Joe Hershberger <[email protected]>
Cc: Stephen Warren <[email protected]>
Cc: Simon Glass <[email protected]>
Reviewed-by: Stephen Warren <[email protected]>
Acked-by: Joe Hershberger <[email protected]>
|
|
Thanks to Stefan Brüns we have more tests and a few more passes too,
update the expected output now.
Cc: Stefan Brüns <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
<path>/<fname> and <path>/./<fname> should reference the same file.
Signed-off-by: Stefan Brüns <[email protected]>
|
|
This is a regression test for a crash happening if the first dirent
in the block matches. Code tried to access a predecessor entry which
does not exist.
The crash happened for any block, but "." is always the first entry in
the first directory block and thus easy to check for.
Signed-off-by: Stefan Brüns <[email protected]>
|
|
ext4 and fat code emit some diagnostic messages during command execution.
These additional lines force a match window size which strictly is not
necessary.
Signed-off-by: Stefan Brüns <[email protected]>
|
|
The write file is created from $SMALL_FILE by appending ".w" on all
other occurences in the code.
Signed-off-by: Stefan Brüns <[email protected]>
|
|
Instead of providing the full path, specify directory and filename
separately. This allows to specify intermediate directories, required
for some additional tests.
Signed-off-by: Stefan Brüns <[email protected]>
|
|
Make sure that when we're telling bootm to boot an image, and we expect
the image to boot we get the output from sandbox that we attempted to
run Linux and that U-Boot completed its job.
Cc: Simon Glass <[email protected]>
Cc: Stephen Warren <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Acked-by: Stephen Warren <[email protected]>
|
|
The fs-test.sh script expected there to be a \n\r style newline at the
end of the output. This is no longer the case, so use 'tr' to remove the
\r that we get.
Fixes: (c5917b4b054d "dm: serial-uclass: Move a carriage return before a
line feed")
Signed-off-by: Tom Rini <[email protected]>
|
|
This prevents capture of command output from terminating early on boards
that use a simple prompt (e.g. "=> ") that appears in the middle of
command output (e.g. crc32's "... ==> 2fa737e0").
Reported-by: Tom Rini <[email protected]>
Signed-off-by: Stephen Warren <[email protected]>
Tested-by: Tom Rini <[email protected]>
Reviewed-by: Heiko Schocher <[email protected]>
|
|
This adds a bunch of unit tests for the "fdt apply" command.
They've all been run successfully in the sandbox. However, as you still
require an out-of-tree dtc with overlay support, this is disabled by
default.
Acked-by: Simon Glass <[email protected]>
Acked-by: Pantelis Antoniou <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
|
|
Return one string for each command that was executed. This seems cleaner.
Suggested-by: Teddy Reed <[email protected]>
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Stephen Warren <[email protected]>
|
|
Add a proper function for this rather than using internal functions. Use it
in the single call site.
Also, do a restart at the end of the vboot test to reset to the normal
device tree.
Signed-off-by: Simon Glass <[email protected]>
Suggested-by: Stephen Warren <[email protected]>
|
|
Use 'cons.log.section' feature to split up the test output. This makes it
easier to read.
Suggested-by: Stephen Warren <[email protected]>
Signed-off-by: Simon Glass <[email protected]>
|
|
Rename this argument and pass it to each function that needs it, instead of
making it global.
Suggested-by: Stephen Warren <[email protected]>
Suggested-by: Teddy Reed <[email protected]>
Signed-off-by: Simon Glass <[email protected]>
|
|
Instead of this, use the existing run_and_log() function, enhanced to
support a command string as well as a list of arguments.
Suggested-by: Stephen Warren <[email protected]>
Signed-off-by: Simon Glass <[email protected]>
|
|
Fix some typos in various files introduced with the vboot test conversion.
Reported-by: Teddy Reed <[email protected]>
Signed-off-by: Simon Glass <[email protected]>
|
|
This check was missed. Add it and make the message more verbose.
Signed-off-by: Simon Glass <[email protected]>
Reported-by: Tom Rini <[email protected]>
Fixes: 9e17b034 (test/py: Provide a way to check that a command fails)
|
|
Fix review comments that were missed at the time. Also explain why we need
to regenerate the device tree for each test.
Reported-by: Teddy Reed <[email protected]>
Suggested-by: Stephen Warren <[email protected]>
Signed-off-by: Simon Glass <[email protected]>
Fixes: f6349c3c (test: Add a README)
|
|
Many SoCs allow power to be applied to or removed from portions of the SoC
(power domains). This may be used to save power. This API provides the
means to control such power management hardware.
Signed-off-by: Stephen Warren <[email protected]>
Acked-by: Simon Glass <[email protected]>
|
|
Quite a few places have a bind() method which just calls dm_scan_fdt_dev().
We may as well call dm_scan_fdt_dev() directly. Update the code to do this.
Signed-off-by: Simon Glass <[email protected]>
|
|
This new function is more convenient for callers, and handles pre-relocation
situations automatically.
Signed-off-by: Simon Glass <[email protected]>
|
|
Getting this error:
Zynq> sb load hostfs - 100
/home/monstr/data/disk/u-boot/build-zynq_zc706/test.fit
Unknown command 'sb' - try 'help'
because sb command is present only for Sandbox
obj-$(CONFIG_SANDBOX) += host.o
that's why mark this test to be run only at Sandbox
Signed-off-by: Michal Simek <[email protected]>
Acked-by: Simon Glass <[email protected]>
|
|
Without this, the test fails if the test is run with a cwd other than the
root of the U-Boot source tree.
Fixes: 8729d582595d ("test: Convert the vboot test to test/py")
Signed-off-by: Stephen Warren <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
This should be spl_of_platdata, since otherwise it will try to run on boards
that don't support of-platdata.
Signed-off-by: Simon Glass <[email protected]>
|
|
|
|
Add a simple test which checks that the of-platdata system is working
correctly. The sequence is as follows:
- SPL starts up and probes all the UCLASS_MISC drivers
- There are 3 of these in sandbox.dts
- Therefore there should be 3 U_BOOT_DEVICE() declarations in dt-platdata.c
- These should produce 3 sandbox_spl_test devices
- Each device prints out its platform data when probed
- This test checks for this output and compares it against expectations
Signed-off-by: Simon Glass <[email protected]>
|
