| Age | Commit message (Collapse) | Author |
|---|
|
and fix related test/DTS issues""
This reverts commit 4d84fa1261eb27d57687f2e4c404a78b8653c183, reversing
changes made to b82a1fa7ddc7f3be2f3b75898d5dc44c34420bdd.
I had missed some feedback on this series from earlier, and we have
since had reports of regressions due to this as well. For now, revert
this.
Signed-off-by: Tom Rini <[email protected]>
|
|
related test/DTS issues"
Aristo Chen <[email protected]> says:
This patch series enhances FIT image robustness by adding **memory
region overlap detection** to `mkimage` and fixing existing overlaps
in DTS files and `binman` tests.
The primary goal is to prevent runtime memory corruption from
conflicting load addresses in FIT images.
Key Changes:
1. `mkimage` Overlap Detection: A new validation in
`tools/fit_image.c` checks for overlapping load addresses
within FIT configurations. `mkimage` now errors out with
detailed info on conflicts, preventing bad FIT image creation.
2. New Test Case: A Python test verifies the new detection.
It intentionally creates an overlap (kernel and FDT)
to confirm correct error handling.
3. Fixes for Existing Overlaps:
* Board DTS (k3-am6xx): Adjusted load addresses for TI
firmware stubs to prevent conflicts. This resolves
previously undetected overlaps.
* `binman` Tests: Fixed several tests. U-Boot load
addresses were shifted to avoid ATF conflicts. A new
linker script for TEE ELF sections ensures distinct
memory layouts.
4. Documentation: Added guidance for developers on how to
determine ELF load addresses using readelf, linker scripts,
and objdump when working with binman FIT images.
Impact:
This series improves FIT image reliability by catching overlaps
at build time, helping developers resolve issues before runtime
failures.
Link: https://lore.kernel.org/r/[email protected]
|
|
Fix one binman test that has memory region overlap issue, the test case
needed to be updated to use non-overlapping memory layouts.
* Tests fixed:
- testFitSplitElf
* Changes made:
1. ELF section layouts: added elf_sections_tee.lds with different
address for TEE to avoid overlap with ATF address defined in
elf_sections.lds
2. Makefile to properly build elf_sections_tee binary
3. Updat ftest.py to use separate ELF files for TEE vs ATF components
in split-elf operations.
An upcoming commit will validate if the memory region is overlapped
Signed-off-by: Aristo Chen <[email protected]>
|
|
Fix three binman tests that has memory region overlap issue, the test
cases needed to be updated to use non-overlapping memory layouts.
* Tests fixed:
- testFitFirmwareLoadables
- testFitSignSimple
- testFitSignNoSignatureNodes
* Changes made:
Updated DTB test files to change U-Boot load addresses from 0x0 to
0x2000 to avoid overlapping with ATF in the 0x10-0xfc range:
- 276_fit_firmware_loadables.dts
- 340_fit_signature.dts
- 342_fit_signature.dts
An upcoming commit will validate if the memory region is overlapped
Signed-off-by: Aristo Chen <[email protected]>
Reviewed-by: Neha Malcom Francis <[email protected]>
|
|
platform
To support passing specific commands defined in enum imx8image_cmd to
the imx8image_copy_image() function, this patch introduces a new entry
type nxp-imx9image. This entry generates a plain text data file
containing the relevant commands, enabling flexible configuration during
image creation.
Signed-off-by: Alice Guo <[email protected]>
|
|
Add new etype which generates the Renesas R-Car Gen4 SA0 header.
This header is placed at the beginning of SPI NOR and describes
where should data from SPI NOR offset 0x40000 be loaded to, and
how much data should be loaded there. In case of U-Boot, this is
used to load SPL and possibly other payload(s) into RT-VRAM.
Signed-off-by: Marek Vasut <[email protected]>
|
|
key-name-hint in signature nodes"
Quentin Schulz <[email protected]> says:
I misunderstood the documentation and put the signing key in a keys/
directory while setting key-name-hint property in the signature node and
u-boot-spl-pubkey-dtb to a path.
mkimage doesn't fail if it cannot find the public key when signing a
FIT but returns something on stderr to notify the user it couldn't find
the key. The issue is that bintool currently discards stderr if the
command successfully returns, so the FIT is not signed AND the user
isn't made aware of it unless the image is manually inspected.
mkimage does fail when trying to insert a public key in a DTB if it
isn't found but we can have a better error message.
Link: https://lore.kernel.org/r/[email protected]
|
|
key-name-hint with path
key-name-hint property in u-boot-spl-pubkey-dtb binman entry may contain
a path instead of a filename due to user mistake.
Because we currently assume it is a filename instead of a path, binman
will find the full path to the key based on that path, and return the
dirname of the full path but keeps the path in key-name-hint instead of
stripping the directories from it.
This means mkimage will fail with the following error message if we have
key-name-hint set to keys/dev:
binman: Error 1 running 'fdt_add_pubkey -a sha256,rsa2048 -k /home/qschulz/work/upstream/u-boot/keys -n keys/dev -r conf /home/qschulz/work/upstream/u-boot/build/ringneck/u-boot-spl-dtbdhsfx3mf': Couldn't open RSA certificate: '/home/qschulz/work/upstream/u-boot/keys/keys/dev.crt': No such file or directory
Let's make it a bit more obvious what the error is by erroring out in
binman if a path is provided in key-name-hint (it is named key-name-hint
and not key-path-hint after all).
Fixes: 5609843b57a4 ("binman: etype: Add u-boot-spl-pubkey-dtb etype")
Signed-off-by: Quentin Schulz <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
mkimage doesn't fail if it cannot find the public key but it prints to
stderr. Considering that btool.run() discards stderr, it means binman
happily returns an unsigned FIT and doesn't tell you something went
wrong.
Binman will actually find the file if there's a path in the
key-name-hint property but the current logic expects key-name-hint to be
a filename and thus returns the dirname of the found path for the key,
but with the original key-name-hint appended. This means we can have the
following:
- key-name-hint = "keys/dev"
- name = "/home/qschulz/work/upstream/u-boot/keys/"
so we pass /home/qschulz/work/upstream/u-boot/keys/ to the -k option of
mkimage but the FIT still contains "keys/dev" in key-name-hint which
means mkimage will try to find the key at
/home/qschulz/work/upstream/u-boot/keys/keys/, which doesn't exist.
Let's assume paths are simply not supported (it is named key-name-hint
and not key-path-hint after all) and raise an error if the property
contains a path so that the build fails and not quietly.
Fixes: 133c000ca334 ("binman: implement signing FIT images during image build")
Signed-off-by: Quentin Schulz <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
supernodes"
Moteen Shah <[email protected]> says:
In the U-Boot pre-relocation stage, if the parent node lacks
bootph-all/bootph-some-ram property and the driver lacks a pre-reloc
flag, all of its subsequent subnodes gets skipped over from driver
binding—even if they have a bootph* property.
This series addresses the issue by scanning through all the nodes during
build time and propagating the applicable property to all of its supernode.
Link: https://lore.kernel.org/r/[email protected]
|
|
Add a testcase to ensure that scan_and_prop_bootph() actually
propagates bootph-* properties to supernodes.
Signed-off-by: Moteen Shah <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Aristo Chen <[email protected]> says:
This series introduces a validation step in mkimage to ensure that all image
names referenced under the /configurations node of a FIT source (ITS) are
actually defined under the /images node.
### Motivation
When using mkimage to build FIT images, it's easy to mistakenly reference
nonexistent image nodes in configurations (e.g., referencing a missing `fdt` or
`firmware` node). Such issues are often not caught until runtime in U-Boot.
This series aims to catch these errors early during FIT image creation by
validating the configuration references in mkimage itself.
Link: https://lore.kernel.org/r/[email protected]
|
|
Several binman FIT test device trees reference image nodes such as atf
and uboot in their /configurations sections, but those image nodes
were not actually defined in the /images node. This mismatch can lead
to validation errors when stricter consistency checks are introduced.
This patch adds minimal definitions for atf and uboot under the
/images node in all relevant test DTS files.
Signed-off-by: Aristo Chen <[email protected]>
|
|
Some SoCs require a Trusted Firmware-A (TF-A) AP Trusted ROM (BL1) to
initialize the SoC before U-Boot can run properly. Add an atf-bl1 etype
so we can properly package BL1 into a final binary
Signed-off-by: Bryan Brattlof <[email protected]>
Acked-by: Simon Glass <[email protected]>
|
|
i.MX95 needs to combine DDR PHY firmware images and their byte counts
together, so add a new entry type nxp-header-ddrfw for this requirement.
Signed-off-by: Alice Guo <[email protected]>
|
|
Newer lz4 util is not happy with any padding at end of file,
it would abort with error message like:
Stream followed by undecodable data at position 43.
Workaround by skipping testCompUtilPadding test case and manually
strip padding in testCompressSectionSize test case.
Signed-off-by: Jiaxun Yang <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Simon Glass <[email protected]>
Tested-by: Mattijs Korpershoek <[email protected]>
|
|
Dynamically going through the subnode array and deleting leads to
templates being skipped from deletion when templates are consecutive in
the subnode list. Prevent this from happening by first parsing the DT
and then deleting the nodes. Add a testcase as well for this cornercase.
Signed-off-by: Neha Malcom Francis <[email protected]>
|
|
This change allows to replace both 'SEQ' and 'NAME' keywords by respectively a
sequence number and the name of the FDT to provide more flexibility in the node
name for the device trees included in the FIT.
Signed-off-by: Paul HENRYS <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Test the property 'fit,encrypt' to encrypt FIT data.
Signed-off-by: Paul HENRYS <[email protected]>
|
|
The patch implement new property 'fit,sign' that can be declared
at the top-level 'fit' node. If that option is declared, fit tryies
to detect private keys directory among binman include directories.
That directory than passed to mkimage using '-k' flag and that enable
signing of FIT.
Signed-off-by: Alexander Kochetkov <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Renumbered files, moved new tests to end:
Signed-off-by: Simon Glass <[email protected]>
|
|
This patch is for Marek, to provide a starting point.
To try it, use 'binman test -T' and see the missing coverage.
Signed-off-by: Simon Glass <[email protected]>
|
|
Some images do not have an image_pos value, for example an image which
is part of a compressed section and therefore cannot be accessed
directly.
Handle this case, returning None as the value.
Signed-off-by: Simon Glass <[email protected]>
|
|
The base address of the ELF containing symbols is normally added to
any symbols written, so that the value points to the correct address in
memory when everything is loaded. When the binary resides on disk, a
different offset may be needed, typically 0. Provide a way to specify
this.
Signed-off-by: Simon Glass <[email protected]>
|
|
When using FIT to load firmware builds for multiple models, the FIT must
include a common binary along with a number of devicetree blobs, one for
each model. This is the same mechanism as is used for loading an OS.
However, SPL builds do not normally use the full devicetree, but instead
a cut-down version which various nodes and properties removed.
Add a new fit,fdt-phase property to allow binman to produce these
devicetree blobs.
Signed-off-by: Simon Glass <[email protected]>
|
|
FIT allows the FDT's root-node compatible string to be placed in a
configuration node to simplify and speed up finding the best match for
booting.
Add a new property to support this.
Signed-off-by: Simon Glass <[email protected]>
|
|
In some cases the list of available FDT files is not available in an
entryarg. Provide an option to point to a directory containing them
instead.
Signed-off-by: Simon Glass <[email protected]>
|
|
FIT provides a way to select between different devicetree blobs
depending on the model. This works fine for U-Boot proper and allows SPL
to select the correct blob for the current board at runtime. The boot
sequence (SPL->U-Boot proper) is therefore covered by the existing
feature set.
The first boot phase (typically TPL) cannot use FIT since SoC boot ROMs
don't currently support it. Therefore the TPL image must be specific to
each model it boots on.
To support booting on mulitple models, binman must therefore produce a
separate TPL image for each model, even if the images for the rest of
the phases are identical.
TPL needs to be packaged as an executable binary along with a reduced
devicetree. When multiple models are supported, a reduced devicetree
must be provided for each model.
U-Boot's build system is designed to build a single devicetree for SPL
builds, so does not support this requirement.
Add a new 'alternatives' feature to Binman, allowing it to automatically
subset a devicetree to produce the reduced devicetree for a particular
phase for each supported model. With this it is possible to produce a
separate TPL image for each of the models. The correct one can then be
loaded onto a board, along with the common FIT image(s).
Signed-off-by: Simon Glass <[email protected]>
|
|
Binman has a the useful feature of handling missing external blobs
gracefully, including allowing them to be missing, deciding whether the
resulting image is functional or not and faking blobs when this is
necessary for particular tools (e.g. mkimage).
This feature is widely used in CI. One drawback is that if U-Boot grows
too large to fit along with the required blobs, then this is not
discovered until someone does a 'real' build which includes the blobs.
Add a 'assume-size' property to entries to allow Binman to reserve a
given size for missing external blobs.
Signed-off-by: Simon Glass <[email protected]>
|
|
Use yamllint for checking whether YAML configuration files are adhering
to default yamllint rules.
Signed-off-by: Neha Malcom Francis <[email protected]>
Suggested-by: Nishanth Menon <[email protected]>
|
|
Add test for TI firewalling node in ti-secure.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Manorit Chawdhry <[email protected]>
|
|
K3 devices introduces the concept of centralized power, resource and
security management to System Firmware. This is to overcome challenges
by the traditional approach that implements system control functions on
each of the processing units.
The software interface for System Firmware is split into TIFS and DM. DM
(Device Manager) is responsible for resource and power management from
secure and non-secure hosts. This additional binary is necessary for
specific platforms' ROM boot images and is to be packaged into tispl.bin
Add an entry for DM. The entry can be used for the packaging of
tispl.bin by binman along with ATF and TEE.
Signed-off-by: Neha Malcom Francis <[email protected]>
Reviewed-by: Andrew Davis <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
According to the TRMs of K3 platform of devices, the ROM boot image
format specifies a "Core Options Field" that provides the capability to
set the boot core in lockstep when set to 0 or to split mode when set
to 2. Add support for providing the same from the binman DTS. Also
modify existing test case for ensuring future coverage.
Signed-off-by: Neha Malcom Francis <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add support in binman for generating EFI empty capsules. These
capsules are used in the FWU A/B update feature. Also add test cases
in binman for the corresponding code coverage.
Signed-off-by: Sughosh Ganu <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
The #address-cells and #size-cells are not needed for running the
capsule generation binman tests. Remove the superfluous properties.
Signed-off-by: Sughosh Ganu <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add support in binman for generating EFI capsules. The capsule
parameters can be specified through the capsule binman entry. Also add
test cases in binman for testing capsule generation.
Signed-off-by: Sughosh Ganu <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add test for the 'xilinx-bootgen' etype
Signed-off-by: Lukas Funke <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Allow missing bootgen tool; comment testXilinxBootgenMissing() comment:
Signed-off-by: Simon Glass <[email protected]>
|
|
These have ended up with the same numbers as earlier files. Fix them.
Signed-off-by: Simon Glass <[email protected]>
|
|
This provides support for phandles to be copied over from templates. This
is not quite safe, since if the template is instantiated twice (i.e. in
two different nodes), then duplicate phandles will be found. This will
result in an error.
Signed-off-by: Simon Glass <[email protected]>
|
|
Missing optional blobs was not reported for generated entries, e.g.
tee-os on rockchip targets. Implement a CheckOptional to fix this.
After this the following can be shown:
Image 'simple-bin' is missing optional external blobs but is still functional: tee-os
/binman/simple-bin/fit/images/@tee-SEQ/tee-os (tee-os):
See the documentation for your board. You may need to build Open Portable
Trusted Execution Environment (OP-TEE) and build with TEE=/path/to/tee.bin
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add test for u_boot_spl_pubkey_dtb. The test adds a public key to the
dtb and checks if the required nodes will be added to the images dtb.
Signed-off-by: Lukas Funke <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add tests to reach 100% code coverage for the added etype encrypted.
Signed-off-by: Christian Taedcke <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
These have ended up with the same numbers as earlier files. Fix them.
Signed-off-by: Simon Glass <[email protected]>
|
|
These have ended up with the same numbers as earlier files. Fix them.
Signed-off-by: Simon Glass <[email protected]>
|
|
Drop the use of a numbered key file since numbering is just for the test
devicetree files. Also adjust the tests to avoid putting a hard-coded
path to binman in the file, using the entry arg instead.
Signed-off-by: Simon Glass <[email protected]>
|
|
The ti-secure entry contains certificate for binaries that will be
loaded or booted by system firmware whereas the ti-secure-rom entry
contains certificate for binaries that will be booted by ROM. Support
for both these types of certificates is necessary for booting of K3
devices.
Reviewed-by: Simon Glass <[email protected]>
[[email protected]: fixed inconsist cert generation by multiple packing]
Signed-off-by: Vignesh Raghavendra <[email protected]>
Signed-off-by: Neha Malcom Francis <[email protected]>
|
|
The ti-board-config entry loads and validates a given YAML config file
against a given schema, and generates the board config binary. K3
devices require these binaries to be packed into the final system
firmware images.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Neha Malcom Francis <[email protected]>
|
|
Add support for writing symbols and determining the assumed position of
binaries inside a mkimage image. This is useful as an example for other
entry types which might want to do the same thing.
Signed-off-by: Simon Glass <[email protected]>
|
|
Allow templates to be used inside a section, not just in the top-level
/binman node.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add this as a separate test case.
Signed-off-by: Simon Glass <[email protected]>
|
|
Allow a template to appear in the top level description when using
multiple images.
Signed-off-by: Simon Glass <[email protected]>
|
