| Age | Commit message (Collapse) | Author |
|---|
|
A few tests declare a type when this can be inferred from the node name.
Drop these lines, since it might cause confusion.
Signed-off-by: Simon Glass <[email protected]>
|
|
This entry holds the padding between the end of of TPL binary and the
end of BSS. This region must be left empty so that the devicetree can be
appended correctly and remain accessible without interfering with BSS.
Signed-off-by: Simon Glass <[email protected]>
|
|
Allow this entry type to be placed in an image. This is the TPL binary,
without a devicetree appended.
Signed-off-by: Simon Glass <[email protected]>
|
|
Since this is an execuable we should be able insert symbol values into it.
Add support for this.
Use common code for this test and the original testSymbols. Use hex
consistently for the values and add some more comments.
Signed-off-by: Simon Glass <[email protected]>
|
|
The offset of an entry needs to be adjusted by its skip-at-start value.
This is currently missing when reading entry data. Fix it.
Signed-off-by: Simon Glass <[email protected]>
|
|
When packing files it is sometimes useful to align the start of each file,
e.g. if the flash driver can only access 32-bit-aligned data. Provides a
new property to support this.
Signed-off-by: Simon Glass <[email protected]>
|
|
At present if a devicetree blob is included in a vblock it does not deal
with updates. This is because the vblock is created once at the start and
does not have a method to update itself later, after all the entry
contents are finalised.
Fix this by adjusting how the vblock is created.
Also simplify Image.ProcessEntryContents() since it effectively duplicates
the code in Section.ProcessContents().
Signed-off-by: Simon Glass <[email protected]>
|
|
Normally when an entry is created, any entry arguments it has are required
to be provided, so it can actually generate its contents correctly.
However when an existing image is read, Entry objects are created for each
of the entries in the image. This happens as part of the process of
reading the image into binman.
In this case we don't need the entry arguments, since we do not intend to
regenerate the entries, or at least not unless requested. So there is no
sense in reporting an error for missing entry arguments.
Add a new property for the Image to handle this case. Update the error
reporting to be conditional on this property.
Signed-off-by: Simon Glass <[email protected]>
|
|
At present binman only supports resolving symbols in the same section as
the binary that uses it. This is quite limited because we often need to
group entries into different sections.
Enhance the algorithm to search the entire image for symbols.
Signed-off-by: Simon Glass <[email protected]>
|
|
With the previous changes, it is now possible to compress entire
sections. Add some tests to check that compression works correctly,
including updating the metadata.
Also update the documentation.
Signed-off-by: Simon Glass <[email protected]>
|
|
At present padding of sections is inconsistent with other entry types, in
that different pad bytes are used.
When a normal entry is padded by its parent, the parent's pad byte is
used. But for sections, the section's pad byte is used.
Adjust logic to always do this the same way.
Note there is still a special case in entry_Section.GetPaddedData() where
an image is padded with the pad byte of the top-level section. This is
necessary since otherwise there would be no way to set the pad byte of
the image, without adding a top-level section to every image.
Signed-off-by: Simon Glass <[email protected]>
|
|
Check the contents of each section to make sure it is actually in the
right place.
Also fix a whitespace error in the .dts file.
Signed-off-by: Simon Glass <[email protected]>
|
|
At present we use 'compress' as the property to set the compression of
a 'files' entry. But this conflicts with the same property for entries,
of which Entry_section is a subclass.
Strictly speaking, since Entry_files is in fact a subclass of
Entry_section, the files can be compressed individually but also the
section (that contains all the files) can itself be compressed. With this
change, it is possible to express that.
Signed-off-by: Simon Glass <[email protected]>
|
|
At present this feature is tested view the end-at-4gb feature. Add some
tests of its own, including the operation of padding.
The third test here shows binman's current, inconsistent approach to
padding in the top-level section. Future patches in this series will
address this.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add an entry type for a firmware blob for a System Control Processor,
given by an entry arg. This firmware is a raw binary blob.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Jagan Teki <[email protected]>
|
|
In some cases it is useful to include a U-Boot environment region in an
image. This allows the board to start up with an environment ready to go.
Add a new entry type for this. The input is a text file containing the
environment entries, one per line, in the format:
var=value
Signed-off-by: Simon Glass <[email protected]>
Acked-by: Andy Shevchenko <[email protected]>
|
|
The recent support for missing external binaries does not show an error
message when a file is genuinely missing (i.e. it is missing but not
marked as 'external'). This means that when -m is passed to binman, it
will never report a missing file.
Fix this and add a test.
Signed-off-by: Simon Glass <[email protected]>
Acked-by: Andy Shevchenko <[email protected]>
|
|
When an external blob is missing it can be quite confusing for the user.
Add a way to provide a help message that is shown.
Signed-off-by: Simon Glass <[email protected]>
Signed-off-by: Alper Nebi Yasak <[email protected]>
|
|
Add a new entry argument to the fit entry which allows selection of the
default configuration to use. This is the 'default' property in the
'configurations' node.
Update the Makefile to pass in the value of DEVICE_TREE or
CONFIG_DEFAULT_DEVICE_TREE to provide this information.
Signed-off-by: Simon Glass <[email protected]>
Suggested-by: Michal Simek <[email protected]>
|
|
These test files are currently "intended for use on x86 hosts", but most
of the tests using them can still pass when cross-compiled to x86 on an
arm64 host.
This patch enables non-x86 hosts to run the tests by specifying a
cross-compiler via CROSS_COMPILE. The list of variables it sets is taken
from the top-level Makefile. It would be possible to automatically set
an x86 cross-compiler with a few blocks like:
ifneq ($(shell i386-linux-gnu-gcc --version 2> /dev/null),)
CROSS_COMPILE = i386-linux-gnu-
endif
But it wouldn't propagate to the binman process calling this Makefile,
so it's better just raise an error and expect 'binman test' to be run
with a correct CROSS_COMPILE.
Signed-off-by: Alper Nebi Yasak <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
In some cases it is useful to generate a FIT which has a number of DTB
images, selectable by configuration. Add support for this in binman,
using a simple iterator and string substitution.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add an entry for ARM Trusted Firmware's 'BL31' payload, which is the
device's main firmware. Typically this is U-Boot.
Signed-off-by: Simon Glass <[email protected]>
|
|
When reading subentries of each image, the FIT entry type directly
concatenates their contents without padding them according to their
offset, size, align, align-size, align-end, pad-before, pad-after
properties.
This patch makes sure these properties are respected by offloading this
image-data building to the section etype, where each subnode of the
"images" node is processed as a section. Alignments and offsets are
respective to the beginning of each image. For example, the following
fragment can end up having "u-boot-spl" start at 0x88 within the final
FIT binary, while "u-boot" would then end up starting at e.g. 0x20088.
fit {
description = "example";
images {
kernel-1 {
description = "U-Boot with SPL";
type = "kernel";
arch = "arm64";
os = "linux";
compression = "none";
u-boot-spl {
};
u-boot {
align = <0x10000>;
};
};
};
}
Signed-off-by: Alper Nebi Yasak <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reinstate check in testPadInSections(), squash in
"binman: Allow FIT binaries to have missing external blobs"
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Alper Nebi Yasak <[email protected]>
|
|
Other relevant properties (pad-after, offset, size, align, align-size,
align-end) already work since Pack() sets correct ranges for subentries'
data (.offset, .size variables), but some padding here is necessary to
align the data within this range to match the pad-before property.
Signed-off-by: Alper Nebi Yasak <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Switch to str.startswith for matching like the FIT etype does since the
current version doesn't ignore 'hash-1', 'hash-2', etc.
Signed-off-by: Alper Nebi Yasak <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
At present testPackX86RomMeNoDesc removes the contents of the
descriptor.bin file and testPackX86RomMeMissingDesc removes the file
completely.
If a test that relies on this file happens to run after it is removed, it
will not work. Since we have no control over the selecting of tests that
run in parallel and series, we must avoid changing the files.
Update this tests to use separate files instead.
Signed-off-by: Simon Glass <[email protected]>
|
|
FIT (Flat Image Tree) is the main image format used by U-Boot. In some
cases scripts are used to create FITs within the U-Boot build system. This
is not ideal for various reasons:
- Each architecture has its own slightly different script
- There are no tests
- Some are written in shell, some in Python
To help address this, add support for FIT generation to binman. This works
by putting the FIT source directly in the binman definition, with the
ability to adjust parameters, etc. The contents of each FIT image come
from sub-entries of the image, as is normal with binman.
Signed-off-by: Simon Glass <[email protected]>
|
|
Some binary blobs unfortunately obtain their position in the image from
other binary blobs, such as Intel's 'descriptor'. In this case we cannot
rely on packing to work. It is not possible to produce a valid image in
any case, due to the missing blobs.
Allow zero-length overlaps so that this does not cause any problems.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
When external blobs are missing, show a message indicating that the images
are not functional.
Signed-off-by: Simon Glass <[email protected]>
|
|
It is useful to be able to distinguish between ordinary blobs such as
u-boot.bin and external blobs that cannot be build by the U-Boot build
system. If the external blobs are not available for some reason, then we
know that a value image cannot be built.
Introduce a new 'blob-ext' entry type for that.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
As a first step to integrating mkimage into binman, add a new entry type
that feeds data into mkimage for processing and incorporates that output
into the image.
Signed-off-by: Simon Glass <[email protected]>
|
|
This reverts commit 5d3a21df6694ebd66d5c34c9d62a26edc7456fc7, reversing
changes made to 56d37f1c564107e27d873181d838571b7d7860e7.
Unfortunately this is causing CI failures:
https://travis-ci.org/github/trini/u-boot/jobs/711313649
Signed-off-by: Tom Rini <[email protected]>
|
|
FIT (Flat Image Tree) is the main image format used by U-Boot. In some
cases scripts are used to create FITs within the U-Boot build system. This
is not ideal for various reasons:
- Each architecture has its own slightly different script
- There are no tests
- Some are written in shell, some in Python
To help address this, add support for FIT generation to binman. This works
by putting the FIT source directly in the binman definition, with the
ability to adjust parameters, etc. The contents of each FIT image come
from sub-entries of the image, as is normal with binman.
Signed-off-by: Simon Glass <[email protected]>
|
|
Some binary blobs unfortunately obtain their position in the image from
other binary blobs, such as Intel's 'descriptor'. In this case we cannot
rely on packing to work. It is not possible to produce a valid image in
any case, due to the missing blobs.
Allow zero-length overlaps so that this does not cause any problems.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
When external blobs are missing, show a message indicating that the images
are not functional.
Signed-off-by: Simon Glass <[email protected]>
|
|
It is useful to be able to distinguish between ordinary blobs such as
u-boot.bin and external blobs that cannot be build by the U-Boot build
system. If the external blobs are not available for some reason, then we
know that a value image cannot be built.
Introduce a new 'blob-ext' entry type for that.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
As a first step to integrating mkimage into binman, add a new entry type
that feeds data into mkimage for processing and incorporates that output
into the image.
Signed-off-by: Simon Glass <[email protected]>
|
|
A recent change adjusted the symbol calculation to work on x86 but broke
it for Tegra. In fact this is because they have different needs.
On x86 devices the code is linked to a ROM address and the end-at-4gb
property is used for the image. In this case there is no need to add the
base address of the image, since the base address is already built into
the offset and image-pos properties.
On other devices we must add the base address since the offsets start at
zero.
In addition the base address is currently added to the 'offset' and 'size'
values. It should in fact only be added to 'image-pos', since 'offset' is
relative to its parent and 'size' is not actually an address. This code
should have been adjusted when support for 'image-pos' and 'size' was
added, but it was not.
To correct these problems:
- move the code that handles adding the base address to section.py, which
can check the end-at-4gb property and which property
(offset/size/image-pos) is being read
- add the base address only when needed (only for image-pos and not if the
image uses end-at-4gb)
- add a note to the documentation
- add a separate test to cover x86 behaviour
Fixes: 15c981cc (binman: Correct symbol calculation with non-zero image base)
Signed-off-by: Simon Glass <[email protected]>
Tested-by: Stephen Warren <[email protected]>
|
|
This entry is used to hold an Intel FSP-T (Firmware Support Package
Temp-RAM init) binary. Add support for this in binman.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
This entry is used to hold an Intel FSP-S (Firmware Support Package
Silicon init) binary. Add support for this in binman.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
At present binman adds the image base address to the symbol value before
it writes it to the binary. This is not correct since the symbol value
itself (e.g. image position) has no relationship to the image base.
Fix this and update the tests to cover this case.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
The Intel FSP supports initialising memory early during boot using a binary
blob called 'fspm'. Add support for this.
Signed-off-by: Simon Glass <[email protected]>
|
|
It is useful to be able to access the size of an image in SPL, with
something like:
binman_sym_declare(unsigned long, u_boot_any, size);
...
ulong u_boot_size = binman_sym(ulong, u_boot_any, size);
Add support for this and update the tests.
Signed-off-by: Simon Glass <[email protected]>
|
|
At present these are large enough to hold 20 bytes of symbol data. Add
four more bytes so we can add another test.
Unfortunately at present this involves changing a few test files to make
room. We could adjust the test files to not specify sizes for entries.
Then we could make the tests check the actual sizes. But for now, leave it
as it is, since the effort is minor.
Signed-off-by: Simon Glass <[email protected]>
|
|
Entries which include a section and need to obtain its contents call
GetData(), as with any other entry. But the current implementation of this
method in entry_Section requires the size of the section to be known. If
it is unknown, an error is produced, since size is None:
TypeError: can't multiply sequence by non-int of type 'NoneType'
There is no need to know the size in advance since the code can be
adjusted to build up the section piece by piece, instead of patching each
entry into an existing bytearray.
Update the code to handle this and add a test.
Signed-off-by: Simon Glass <[email protected]>
|
|
Two of the test files somehow were not converted to three digits. Fix
them, using the next available numbers.
Signed-off-by: Simon Glass <[email protected]>
|
|
At present a small number of test files use hyphens instead of
underscores. Rename them for consistency.
Signed-off-by: Simon Glass <[email protected]>
|
|
At present we only support symbols inside binaries which are at the top
level of an image. This restrictions seems unreasonable since more complex
images may want to group binaries within different sections.
Relax the restriction, adding a new _SetupTplElf() helper function.
Also fix a typo in the comment for testTpl().
Signed-off-by: Simon Glass <[email protected]>
|
|
We use the Makefile for all ELF test files now, so drop all the code that
checks whether to get the test file from the Makefile or from the git
repo.
Also add a comment to the Makefile indicating that it is run from binman.
Signed-off-by: Simon Glass <[email protected]>
|
|
Remove this file from git and instead build it using the Makefile.
Signed-off-by: Simon Glass <[email protected]>
|
