| Age | Commit message (Collapse) | Author |
|---|
|
Add a command-line argument for setting the tooldir, so that the default
can be overridden. Add this directory to the toolpath automatically.
Create the directory if it does not already exist.
Put the default in the argument parser instead of the class, so that it
is more obvious.
Update a few tests that expect the utility name to be provided without
any path (e.g. 'futility'), so they can accept a path, e.g.
/path/to/futility
Update the documentation and add a few tests.
Improve the help for --toolpath while we are here.
Signed-off-by: Simon Glass <[email protected]>
|
|
At present binman writes tools into the ~/bin directory. This is
convenient but some may be concerned about downloading unverified
binaries and running them. Place then in a special ~/.binman-tools
directory instead.
Mention this in the documentation.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
We want to be able to change this directory. Use a class member to hold
the value, since changing a constant is not good.
Signed-off-by: Simon Glass <[email protected]>
|
|
This was not regenerated with recent changes. Update it.
Signed-off-by: Simon Glass <[email protected]>
|
|
Fix this typo.
Signed-off-by: Simon Glass <[email protected]>
|
|
Use correct argument name in docstrings.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Replace notes with nodes in code comments and docstrings.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Entry_blob_ext contains an implementation of SetAllowFakeBlob that is
identical to the one in the base Entry class, remove it.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add an entry flag called 'preserve' to indicate that an entry should be
preserved by firmware updates. Propagate this to FMAP too.
Signed-off-by: Simon Glass <[email protected]>
|
|
This is needed to download tools, but we may not need to do this. At
present binman fails to start if HOME is not set.
Use the current directory as a default to avoid this.
Signed-off-by: Simon Glass <[email protected]>
|
|
Prepare v2023.04-rc3
|
|
Add the 'missing-msg' for more detailed output
on missing system firmware.
Signed-off-by: Rick Chen <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
Reviewed-by: Yu Chien Peter Lin <[email protected]>
|
|
Update various build and test components to use the new schema.
Signed-off-by: Simon Glass <[email protected]>
|
|
At present we show 'main section' as the top-level section name. It may
be more helpful to show the actual image name. This is tricky because
Image is a parent class of Entry_section, so there is no distinction
between an image and a section.
Update it to show the image name.
Signed-off-by: Simon Glass <[email protected]>
|
|
Unfortunately a recent patch snuck through without the require test
coverage. Fix it.
Signed-off-by: Simon Glass <[email protected]>
Fixes: 571bc4e67d3 ("binman: Support positioning an entry by and ELF symbol")
|
|
This property sets the minimum size of an entry, including padding but
not alignment. It can be used to reserve space for growth of an entry,
or to enforce a minimum offset for later entries in the section.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
In some cases it is desired for SPL to start TF-A instead of U-Boot
proper. Add support for a new property fit,firmware that picks a
valid entry and prepends the remaining valid entries to the
loadables list generated by the split-elf generator.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Special nodes, hash and signature, is not being added to the nodes
generated for each segment in split-elf operation.
Copy the subnode logic used in _gen_fdt_nodes to _gen_split_elf to
ensure special nodes are added to the generated nodes.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add support to indicate what alignment to use for the FIT and its
external data. Pass the alignment to mkimage via the -B flag.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
In some cases it is useful to position an entry over the top of a symbol
in an ELF file. For example, if the symbol holds a version string then it
allows the string to be accessed from the fdtmap.
Add support for this.
Suggested-by: Pali Rohár <[email protected]>
Suggested-by: Keith Short <[email protected]>
Signed-off-by: Simon Glass <[email protected]>
|
|
The current support for updating variables in a binary is hard-coded to
work with U-Boot:
- It assumes the image starts at __image_copy_start
- It uses the existing U-Boot-specific entry types
It is useful for other projects to use these feature.
Add properties to enable writing symbols for any blob, a way of specifying
the base symbol and a way of providing the ELF filename to allow symbol
lookup to take place.
With this it is possible to update a Zephyr image, such as zephyr.bin
after it has been built.
Signed-off-by: Simon Glass <[email protected]>
|
|
In some cases it is useful to have an entry overlap with another in a
section, either to update the contents within a blob, or to add an entry
to the fdtmap that covers only part of the blob.
Add support for this.
Signed-off-by: Simon Glass <[email protected]>
|
|
This appears in two places in the code. Use a shared function instead.
Signed-off-by: Simon Glass <[email protected]>
|
|
It is sometimes useful to define an entry which does not have its own
contents but does appear in the image. The contents are set by the section
which contains it, even though it appears as an entry in the fdtmap.
Add support for this.
Signed-off-by: Simon Glass <[email protected]>
|
|
This means that the data is not yet available. Update some comments to
make this clearer.
Signed-off-by: Simon Glass <[email protected]>
|
|
This is a slightly different scenario from the existing testSections
tests. Add a new test for it.
Signed-off-by: Simon Glass <[email protected]>
|
|
Some blobs are actually not necessary for the board to work correctly. Add
a property to allow this to be indicated. Missing optional blobs do not
cause a build failure.
Signed-off-by: Simon Glass <[email protected]>
|
|
OP-TEE has a format with a binary header that can be used instead of the
ELF file. With newer versions of OP-TEE this may be required on some
platforms.
Add support for this in binman. First, add a method to obtain the ELF
sections from an entry, then use that in the FIT support. We then end up
with the ability to support both types of OP-TEE files, depending on which
one is passed in with the entry argument (TEE=xxx in the U-Boot build).
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a function which checks whether data is in ELF format or not. This
will be used by binman to check this for entries.
Signed-off-by: Simon Glass <[email protected]>
|
|
Support entries which can be optional depending on their contents. This
allows special entry types which appear in the image only when needed.
Signed-off-by: Simon Glass <[email protected]>
|
|
Several etypes have this reference in their documentation. Now that we are
using rST, link to the section directly.
Signed-off-by: Simon Glass <[email protected]>
Suggested-by: Quentin Schulz <[email protected]>
|
|
These have got out of data recently. Regenerate them.
Signed-off-by: Simon Glass <[email protected]>
|
|
Expand this comment to cover both cases that are supported.
Signed-off-by: Simon Glass <[email protected]>
|
|
At present only the image (which is a section) has a filename. Move this
implementation to the entry_Section class so that any section can have a
filename. With this, the section data is written to a file.
This allows parts of an image to be written, along with the entire image.
Make a note that this can be used to include the contents of a section in
one image in another (later) image.
Signed-off-by: Simon Glass <[email protected]>
|
|
Perform a simple rename of CONFIG_X86_MRC_ADDR to CFG_X86_MRC_ADDR
Signed-off-by: Tom Rini <[email protected]>
|
|
Add command-line documentation for binman.
Signed-off-by: Simon Glass <[email protected]>
|
|
These are documented in various several sections. Add a new section that
mentions them all in one place so it is easier to see what environment
variables can be used to control U-Boot's use of binman.
Signed-off-by: Simon Glass <[email protected]>
Suggested-by: Heinrich Schuchardt <[email protected]>
|
|
At present binman returns success when told to handle missing/faked blobs
or missing bintools. This is confusing since in fact the resulting image
cannot work.
Use exit code 103 to signal this problem, with a -W option to convert
it to a warning.
Rename the flag to --ignore-missing since it controls bintools also.
Add documentation about exit codes while we are here.
Signed-off-by: Simon Glass <[email protected]>
|
|
This reverts commit daa2da754afe1bac777f6cb0f05233e0de7b325d.
This commit is not needed anymore since the btool_ prefix is
automatically stripped by bintool.
Cc: Quentin Schulz <[email protected]>
Signed-off-by: Quentin Schulz <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
The binary is looked on the system by the suffix of the packer class.
This means binman was looking for btool_gzip on the system and not gzip.
Since a btool can have its btool_ prefix missing but its module and
binary presence on the system appropriately found, there's no need to
actually keep this prefix after listing all possible btools, so let's
remove it.
This fixes gzip btool by letting Bintool.find_bintool_class handle the
missing prefix and still return the correct class which is then init
with gzip name instead of btool_gzip.
Additionally, there was an issue with the cached module global variable.
The variable only stores the module and not the associated class name
when calling find_bintool_class.
This means that when caching the module on the first call to
find_bintool_class, class_name would be set to Bintoolbtool_gzip but the
module_name gzip only, adding the module in the gzip key in the module
dictionary. When hitting the cache on next calls, the gzip key would be
found, so its value (the module) is used. However the default class_name
(Bintoolgzip) is used, failing the getattr call.
Instead, let's enforce the same class name: Bintool<packer>, whatever
the filename it is contained in.
Cc: Quentin Schulz <[email protected]>
Signed-off-by: Quentin Schulz <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
In some cases the ELF version of SPL builds may be packaged, rather
than a binary .bin file. Add support for this.
Signed-off-by: Simon Glass <[email protected]>
|
|
This feature is used by several etypes and we plan to add more that use
it. Make symbol writing a feature of the base class to reduce the code
duplication.
Signed-off-by: Simon Glass <[email protected]>
|
|
Move this code into its own function so it can be used from tests.
Signed-off-by: Simon Glass <[email protected]>
|
|
Provide a function to obtain the integer value of an ELF symbol. This will
be used
Signed-off-by: Simon Glass <[email protected]>
|
|
The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE
and this makes it imposible to use CONFIG_VAL().
Rename it to resolve this problem.
Signed-off-by: Simon Glass <[email protected]>
|
|
Adding support to symlink an image packaged using binman.
Signed-off-by: Neha Malcom Francis <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
This is not needed and we should avoid typedefs. Use the struct instead
and rename it to indicate that it really is a legacy struct.
Signed-off-by: Simon Glass <[email protected]>
|
|
A binary download is not great, since it depends on libraries being
present in the system. Build futility from source instead.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add support for U-Boot's Verifying Program Loader phase.
Signed-off-by: Simon Glass <[email protected]>
|
|
binman fixes for bintool support
|
