| Age | Commit message (Collapse) | Author |
|---|
|
There is no need to remove input files. It makes it harder to diagnose
failures. Keep the payload file.
There is no test for this condition, but one could be added.
Signed-off-by: Simon Glass <[email protected]>
Acked-by: Sughosh Ganu <[email protected]>
|
|
Tools cannot be assumed to be present. Add a check for this with the
mkeficpasule tool.
Signed-off-by: Simon Glass <[email protected]>
Fixes: b617611b27a ("binman: capsule: Add support for generating...")
|
|
Now that this tool has a version number, collect it.
Signed-off-by: Simon Glass <[email protected]>
|
|
Pass CONFIG_OF_SPL_REMOVE_PROPS to binman so that it can remove
properties correctly when producing FITs for SPL phases.
Signed-off-by: Simon Glass <[email protected]>
|
|
When using FIT to load firmware builds for multiple models, the FIT must
include a common binary along with a number of devicetree blobs, one for
each model. This is the same mechanism as is used for loading an OS.
However, SPL builds do not normally use the full devicetree, but instead
a cut-down version which various nodes and properties removed.
Add a new fit,fdt-phase property to allow binman to produce these
devicetree blobs.
Signed-off-by: Simon Glass <[email protected]>
|
|
FIT allows the FDT's root-node compatible string to be placed in a
configuration node to simplify and speed up finding the best match for
booting.
Add a new property to support this.
Signed-off-by: Simon Glass <[email protected]>
|
|
In some cases the list of available FDT files is not available in an
entryarg. Provide an option to point to a directory containing them
instead.
Signed-off-by: Simon Glass <[email protected]>
|
|
FIT provides a way to select between different devicetree blobs
depending on the model. This works fine for U-Boot proper and allows SPL
to select the correct blob for the current board at runtime. The boot
sequence (SPL->U-Boot proper) is therefore covered by the existing
feature set.
The first boot phase (typically TPL) cannot use FIT since SoC boot ROMs
don't currently support it. Therefore the TPL image must be specific to
each model it boots on.
To support booting on mulitple models, binman must therefore produce a
separate TPL image for each model, even if the images for the rest of
the phases are identical.
TPL needs to be packaged as an executable binary along with a reduced
devicetree. When multiple models are supported, a reduced devicetree
must be provided for each model.
U-Boot's build system is designed to build a single devicetree for SPL
builds, so does not support this requirement.
Add a new 'alternatives' feature to Binman, allowing it to automatically
subset a devicetree to produce the reduced devicetree for a particular
phase for each supported model. With this it is possible to produce a
separate TPL image for each of the models. The correct one can then be
loaded onto a board, along with the common FIT image(s).
Signed-off-by: Simon Glass <[email protected]>
|
|
At present the contents of an FDT (for each phase) are fixed,
determined by the build and provided to Binman as input files.
Provide a means for entry types to provide their own FDT, so that it can
be processed, if needed.
Signed-off-by: Simon Glass <[email protected]>
|
|
Allow the entry-docs command to operate even if pylibfdt is not present
in the systemn.
Signed-off-by: Simon Glass <[email protected]>
|
|
Binman needs the ability to run fdtgrep to prepare devicetree subsets
for use by SPL and TPL. Add a new bintool in preparation for this.
Signed-off-by: Simon Glass <[email protected]>
|
|
This function has strange indentation. Fix it.
Fixes: 8c1fbd1f607 ("binman: ftest: Add test for u_boot_spl_pubkey_dtb")
Signed-off-by: Simon Glass <[email protected]>
|
|
Fix a minor typo in this function.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a comment about this entry type being expanded, to match the comment
for SPL and TPL. Drop an unwanted line in the SPL and TPL docs while
here.
Signed-off-by: Simon Glass <[email protected]>
|
|
The filenames are a bit confused. Fix them.
Signed-off-by: Simon Glass <[email protected]>
|
|
When an entry is compressed, write the compressed contents to a file so
that it is possible to see what was produced. This aids debugging with
new images.
Signed-off-by: Simon Glass <[email protected]>
|
|
When symbol-writing does not appear to work, it can sometimes be hard to
figure out what is going on. Add some more debugging to help.
Signed-off-by: Simon Glass <[email protected]>
|
|
This has become quite long, so move it into a separate function.
Signed-off-by: Simon Glass <[email protected]>
|
|
This function returns a value, so add documentation for it.
Signed-off-by: Simon Glass <[email protected]>
|
|
The docs have somehow got out of sync. Regenerate the file to fix the
problem.
Signed-off-by: Simon Glass <[email protected]>
|
|
The example contains references to an non-existent node. Fix it.
Signed-off-by: Simon Glass <[email protected]>
|
|
Update to a newer version of this tool, 4.22.01. This runs OK with the
current binman tests and matches the one in CI.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
This cannot ever go at offset 0 since the descriptor is there. Use a
better offset for the ME, as used by link and coral, for example.
This matters when we start using assumed sizes for missing blobs.
Signed-off-by: Simon Glass <[email protected]>
|
|
Binman has a the useful feature of handling missing external blobs
gracefully, including allowing them to be missing, deciding whether the
resulting image is functional or not and faking blobs when this is
necessary for particular tools (e.g. mkimage).
This feature is widely used in CI. One drawback is that if U-Boot grows
too large to fit along with the required blobs, then this is not
discovered until someone does a 'real' build which includes the blobs.
Add a 'assume-size' property to entries to allow Binman to reserve a
given size for missing external blobs.
Signed-off-by: Simon Glass <[email protected]>
|
|
Reduce the length of the underline for this header, to match the
heading itself.
Signed-off-by: Simon Glass <[email protected]>
|
|
Correct formatting errors in the documentation.
Regenerate the entries.rst file to include this recent addition.
Signed-off-by: Simon Glass <[email protected]>
|
|
Regenerate the entries.rst file to include this recent addition.
Note that more docs are needed here, to actually describe the entry
type.
Note also that the entry type needs Binman tests added.
Signed-off-by: Simon Glass <[email protected]>
|
|
Somehow the class documentation has got out of sync with the generated
entries.rst file. Regenerating it causes errors, so correct these and
regenerate the entries.rst file.
Signed-off-by: Simon Glass <[email protected]>
Fixes: 809f28e7213 ("binman: capsule: Use dumped capsule header...")
|
|
The methods `unittest.assertEquals()` and
`unittest.assertRegexpMatches()` are marked deprecated[1].
In Python 3.12 these aliases have been removed, so do a sed to replace
them with their new names.
[1] https://docs.python.org/3.11/library/unittest.html#deprecated-aliases
Signed-off-by: Brandon Maier <[email protected]>
CC: Simon Glass <[email protected]>
CC: Alper Nebi Yasak <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add new binman etype which allows signing both the SPL and fitImage sections
of i.MX8M flash.bin using CST. There are multiple DT properties which govern
the signing process, nxp,loader-address is the only mandatory one which sets
the SPL signature start address without the imx8mimage header, this should be
SPL text base. The key material can be configured using optional DT properties
nxp,srk-table, nxp,csf-crt, nxp,img-crt, all of which default the key material
names generated by CST tool scripts. The nxp,unlock property can be used to
unlock CAAM access in SPL section.
Reviewed-by: Tim Harvey <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
|
|
Fix a typo, no functional change.
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
Add new binman etype derived from mkimage etype which generates configuration
input file for mkimage -T imx8mimage, and runs the mkimage on input data. The
mkimage -T imx8mimage is used to generate combined image with SPL and DDR PHY
blobs which is bootable on i.MX8M.
The configuration file generated here is equivalent of imx8mimage.cfg, which
is the file passed to '$ mkimage -T imx8mimage -n imx8mimage.cfg ...' . The
settings generated into the imx8mimage.cfg file are configured via supported
binman DT properties, nxp,boot-from, nxp,loader-address, nxp,rom-version.
Signed-off-by: Marek Vasut <[email protected]>
|
|
When there is a lint error the user gets the following cryptic message:
binman: Node '/path/to/some/node': Yamllint error: 18: comments
This isn't very helpful. Improve the message to tell the user that the
number is actually a line number and also tell the user in which file
they have to look.
Signed-off-by: Michael Walle <[email protected]>
Reviewed-by: Neha Malcom Francis <[email protected]>
|
|
To debug using jtag, ROM needs to unlock jtag debugging on HS devices
and it does that looking at this debug extension.
Add the debug extension and enable it by default.
Link: https://software-dl.ti.com/tisci/esd/latest/2_tisci_msgs/security/sec_cert_format.html?highlight=debug#sysfw-debug-ext
Signed-off-by: Manorit Chawdhry <[email protected]>
Reviewed-by: Neha Malcom Francis <[email protected]>
|
|
Use yamllint for checking whether YAML configuration files are adhering
to default yamllint rules.
Signed-off-by: Neha Malcom Francis <[email protected]>
Suggested-by: Nishanth Menon <[email protected]>
|
|
Manorit Chawdhry <[email protected]> says:
K3 devices have firewalls that are used to prevent illegal accesses to
memory regions that are deemed secure. The series prevents the illegal
accesses to ATF and OP-TEE regions that are present in different K3
devices.
AM62X, AM62AX and AM64X are currently in hold due to some firewall
configurations that our System Controller (TIFS) needs to handle.
The devices that are not configured with the firewalling nodes will not
be affected and can continue to work fine until the firewall nodes are
added so will be a non-blocking merge.
Test Logs: https://gist.github.com/manorit2001/4cead2fb3a19eb5d19005b3f54682627
CICD Run: https://github.com/u-boot/u-boot/pull/442
|
|
Add test for TI firewalling node in ti-secure.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Manorit Chawdhry <[email protected]>
|
|
We can now firewall entities while loading them through our secure
entity TIFS, the required information should be present in the
certificate that is being parsed by TIFS.
The following commit adds the support to enable the certificates to be
generated if the firewall configurations are present in the binman dtsi
nodes.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Manorit Chawdhry <[email protected]>
|
|
Pytest 7.4.3 complains if a variable is used in a finally clause without
having been initialized before the try clause.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
old_val can only be assumed initialized in the finally block
if it is assigned a value before the try statement.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
K3 devices introduces the concept of centralized power, resource and
security management to System Firmware. This is to overcome challenges
by the traditional approach that implements system control functions on
each of the processing units.
The software interface for System Firmware is split into TIFS and DM. DM
(Device Manager) is responsible for resource and power management from
secure and non-secure hosts. This additional binary is necessary for
specific platforms' ROM boot images and is to be packaged into tispl.bin
Add an entry for DM. The entry can be used for the packaging of
tispl.bin by binman along with ATF and TEE.
Signed-off-by: Neha Malcom Francis <[email protected]>
Reviewed-by: Andrew Davis <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
s/use set/set/
Signed-off-by: Dario Binacchi <[email protected]>
Reviewed-By: Michael Trimarchi <[email protected]>
|
|
A new release has been done with this version, so update it. Use the
version numbers in dependencies also.
Signed-off-by: Simon Glass <[email protected]>
|
|
Update to use the new docs.u-boot.org URL for documentation.
Signed-off-by: Simon Glass <[email protected]>
|
|
Title underlines should match the length of the title. Unfortunately
docutils only catches underlines that are too short.
Add some missing empty lines after titles.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
According to the TRMs of K3 platform of devices, the ROM boot image
format specifies a "Core Options Field" that provides the capability to
set the boot core in lockstep when set to 0 or to split mode when set
to 2. Add support for providing the same from the binman DTS. Also
modify existing test case for ensuring future coverage.
Signed-off-by: Neha Malcom Francis <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
cbfsutil completely changed the way that stages are formatted in CBFS.
Adjust the binman implementation to do the same.
This mirrors commit 81dc20e744 in coreboot.
Signed-off-by: Simon Glass <[email protected]>
|
|
In preparation for changing how stages are stored, rename the existing
stage tag.
Signed-off-by: Simon Glass <[email protected]>
|
|
cbfsutil changed to 4-byte alignment for filenames instead of 16.
Adjust the binman implementation to do the same.
This mirrors commit 5779ca718c in coreboot.
Signed-off-by: Simon Glass <[email protected]>
|
|
cbfsutil changed to write zero bytes instead of 0xff when a small
padding must be added. Adjust the binman implementation to do the same.
Drop the code which looks for an unused attribute tag, since it is not
used. A future patch moves the attributes to the end of the header in
any case, so no data will follow the attributes.
This mirrors commit f0cc7adb2f in coreboot.
Signed-off-by: Simon Glass <[email protected]>
|
