| Age | Commit message (Collapse) | Author |
|---|
|
It is convenient to use ~ to represent the home directory in the
settings file. Add support for this.
Signed-off-by: Simon Glass <[email protected]>
|
|
If the toolchain is bad, it should not be added. Correct the logic for
this.
Signed-off-by: Simon Glass <[email protected]>
|
|
This is mentioned in examples but should have its own mention in the
'settings' documentation. Add it.
Signed-off-by: Simon Glass <[email protected]>
|
|
The example settings file should be indented so that it shows correctly
in the output. Fix it.
Signed-off-by: Simon Glass <[email protected]>
|
|
This is used by some boards in U-Boot and is a convenient way to deal
with common settings where using a Kconfig files is not desirable.
Detect #include files and process them as if they were part of the
original file.
Signed-off-by: Simon Glass <[email protected]>
Fixes: https://source.denx.de/u-boot/custodians/u-boot-dm/-/issues/30
|
|
Use this to control info and debugging messages. Enable them if -v is
given.
Signed-off-by: Simon Glass <[email protected]>
|
|
This code is tested by test_scan_defconfigs() but it is useful to have
some specific tests for the KconfigScanner's operation in U-Boot. Add
a test which checks that the values are obtained correctly.
Signed-off-by: Simon Glass <[email protected]>
|
|
With Python 3.12 some warnings have cropped up. Fix them.
Signed-off-by: Simon Glass <[email protected]>
|
|
For most boards, the device-tree compiler is built in-tree, ignoring the
system version. Add a special option to skip this build. This can be
useful when the system dtc is up-to-date, as it speeds up the build.
Signed-off-by: Simon Glass <[email protected]>
|
|
Buildman retries a failed build when processing a branch, but does not
do this when building current source. It is useful to do this retry in
both cases, so add the logic for it.
Signed-off-by: Simon Glass <[email protected]>
|
|
When building for sandbox, self.cross is empty.
In MakeEnvironment(), CROSS_COMPILE is defined to be self.cross (with
or without a full path), optionally prefixed by the toolchain wrapper
defined in ~/.buildman. This is fine when self.cross is not empty, but
it doesn't make sense when it is:
- Either there is no wrapper and we end up with an empty CROSS_COMPILE
which is the same as not defining it (the host compiler will be used),
- Or there is a wrapper and CROSS_COMPILE will contain only the wrapper
which obviously is not a valid compiler, hence an error.
Test case:
$ sudo apt install ccache
$ grep -q toolchain-wrapper ~/.buildman || \
printf "[toolchain-wrapper]\nwrapper = ccache\n" >>~/.buildman
$ make mrproper
$ ./tools/buildman/buildman sandbox_noinst
$ ./tools/buildman/buildman sandbox_noinst
Building current source for 1 boards (1 thread, 24 jobs per thread)
sandbox: + sandbox_noinst
+arch/sandbox/lib/reloc_sandbox_efi.c:10:15: error: operator '==' has no left operand
+ 10 | #if HOST_ARCH == HOST_ARCH_X86_64
+ | ^~
[...]
The GetEnvArgs function is modified too, since the VAR_CROSS_COMPILE
case has the same issue.
In tools/buildman/test.py, testGetEnvArgs is extended and
testMakeEnvironment is added. They check the 'arm' and 'sandbox'
toolchains, with and without a wrapper.
Signed-off-by: Jerome Forissier <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
The Python virtualenv tool sets up a few things in the environment,
putting its path first in the PATH environment variable and setting up
a sys.prefix different from the sys.base_prefix value.
At present buildman puts the toolchain path first in PATH so that it can
be found easily during the build. For sandbox this causes problems since
/usr/bin/gcc (for example) results in '/usr/bin' being prepended to the
PATH variable. As a result, the venv is partially disabled.
The result is that sandbox builds within a venv ignore the venv, e.g.
when looking for packages.
Correct this by detecting the venv and adding the toolchain path after
the venv path.
Signed-off-by: Simon Glass <[email protected]>
|
|
The Linux kernel documentation has transitioned from using
kconfig-language.txt to kconfig-language.rst. Therefore update all
occurrences of kconfig-language.txt.
Signed-off-by: Hiago De Franco <[email protected]>
|
|
Newer versions of filelock use time.monotonic() instead of time.time().
Update the test the handle this.
It would be better if filelock had support for writing unit tests which
use locking.
Signed-off-by: Simon Glass <[email protected]>
|
|
When -x is used, buildman does not show the list of boards that will be
built, since there are no terms which cause boards to be added, only
terms which cause them to be removed.
Add a special case to fix this.
Signed-off-by: Simon Glass <[email protected]>
Tested-by: Tom Rini <[email protected]>
|
|
There are operations in buildman that result in running the cross-tools
(such as performing size checks) and now that we have not modified PATH
to know where our tools are, these operations fail.
This reverts commit 6c0a3cf75f72370deec3ee516a9dd377397af207.
Signed-off-by: Tom Rini <[email protected]>
|
|
The feature to set the toolchain path does not seem to be needed. It
causes problems with venv (see [1]). Let's remove it.
Add some tests while we are here.
It does not look like any docs changes are needed for this.
[1] https://patchwork.ozlabs.org/project/uboot/patch/[email protected]/
Signed-off-by: Simon Glass <[email protected]>
Suggested-by: Tom Rini <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Reviewed-by: Andrejs Cainikovs <[email protected]>
|
|
Fix 'Thie' and capitalise 'unicode'.
Signed-off-by: Simon Glass <[email protected]>
Suggested-by: Heinrich Schuchardt <[email protected]>
|
|
This is used by some Binman entry types, so add it to allow more tests
to pass.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Add this package so we can run code-coverage tests for Binman.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Buildman uses all available CPUs by default, so running more than one or
two concurrent processes is not normally useful.
However in some CI cases we want to be able to run several jobs at once
to save time. For example, in a lab situation we may want to run a test
on 20 boards at a time, since only the build step actually takes much
CPU.
Add an option which allows such a limit. When buildman starts up, it
waits until the number of running processes goes below the limit, then
claims a spot in the list. The list is maintained with a temporary file.
Note that the temp file is user-specific, since it is hard to create a
locked temporary file which can be accessed by any user. In most cases,
only one user is running jobs on a machine, so this should not matter.
Signed-off-by: Simon Glass <[email protected]>
|
|
When a file is removed by a commit (e.g. include/common.h yay!) it can
cause incremental build failures since one of the dependency files from
a previous build may mention the file.
Add an option to run 'make mrproper' automatically when a build fails.
This can be used to automatically resolve the problem, without always
adding the large overhead of 'make mrproper' to every build.
Signed-off-by: Simon Glass <[email protected]>
|
|
When this flag is enabled, 'make mrproper' is always used when
reconfiguring, so there is no point in doing it again.
Update this.
Signed-off-by: Simon Glass <[email protected]>
|
|
Pass this in so the caller can change it independently of the member
variable.
Signed-off-by: Simon Glass <[email protected]>
|
|
Pass this in so the caller can change it independently of the member
variable.
Signed-off-by: Simon Glass <[email protected]>
|
|
Pass this in so the caller can change it independently of the member
variable.
Signed-off-by: Simon Glass <[email protected]>
|
|
The method `ConfigParser.readfp()` is marked deprecated[1].
In Python 3.12 this method have been removed, so replace it with
`ConfigParser.read_file()`.
[1] https://docs.python.org/3.11/library/configparser.html#configparser.ConfigParser.readfp
Signed-off-by: Brandon Maier <[email protected]>
CC: Simon Glass <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
The methods `unittest.assertEquals()` and
`unittest.assertRegexpMatches()` are marked deprecated[1].
In Python 3.12 these aliases have been removed, so do a sed to replace
them with their new names.
[1] https://docs.python.org/3.11/library/unittest.html#deprecated-aliases
Signed-off-by: Brandon Maier <[email protected]>
CC: Simon Glass <[email protected]>
CC: Alper Nebi Yasak <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
%s/arguemnts/arguemnts/
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
SafeConfigParser was renamed back in Python 3.2 (yes, no typo) to
ConfigParser[1], but it was still working as an alias until it got
removed in 3.12[2].
[1] https://docs.python.org/3.8/whatsnew/3.2.html#configparser
[2] https://github.com/python/cpython/pull/92503
Cc: Quentin Schulz <[email protected]>
Signed-off-by: Quentin Schulz <[email protected]>
|
|
Use yamllint for checking whether YAML configuration files are adhering
to default yamllint rules.
Signed-off-by: Neha Malcom Francis <[email protected]>
Suggested-by: Nishanth Menon <[email protected]>
|
|
%s/cotaining/containing/
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
A new release has been done with this version, so update it. Use the
version numbers in dependencies also.
Signed-off-by: Simon Glass <[email protected]>
|
|
Update to use the new docs.u-boot.org URL for documentation.
Signed-off-by: Simon Glass <[email protected]>
|
|
We cannot be sure that the new config is consistent, particularly when
changing a major item like CONFIG_CMDLINE. Use 'make oldconfig' to
check that and avoid any such problems.
Signed-off-by: Simon Glass <[email protected]>
|
|
When symbols switch between the inited data section and the read-only
data section their visbility changes, at present, with the -B option.
This is confusing, since adding 'const' to a variable declaration can
make it look like a significant improvement in bloat. But in fact
nothing has changed.
Add 'r' to the list of symbols types that are recorded, to correct this
problem. Add a constant to make it easier to find this code next time.
Signed-off-by: Simon Glass <[email protected]>
Reported-by: Tom Rini <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
The Kconfig and maintainer processing can take a while, sometimes 5
seconds or more. This skews the timing printed by buildmand when the build
completes. Start the clock when the threads start to avoid this problem.
Signed-off-by: Simon Glass <[email protected]>
Suggested-by: Tom Rini <[email protected]>
|
|
This can take a while, so show a message when starting.
Signed-off-by: Simon Glass <[email protected]>
Reported-by Tom Rini <[email protected]>
|
|
Make a list of common output extensions and use it to ensure that the -k
option preserves all of these.
Signed-off-by: Simon Glass <[email protected]>
Suggested-by: Tom Rini <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
With Python versions older than 3.9 Buildman produces an error on
start-up. Fix this with a workaround for importlib.
There is already a workaround for v3.6 but I am not sure if that is still
functioning.
Signed-off-by: Simon Glass <[email protected]>
|
|
The latest kernel.org toolchains for gcc are now 13.2.0, so upgrade to
that.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Some boards use a MAINTAINERS entry to specify common files without
referencing any defconfigs. This is allowed and should not result in a
warning.
Drop the warning in this case.
Signed-off-by: Simon Glass <[email protected]>
|
|
Recent refactoring changed buildman to continue operation after fetching
a toolchain. Fix this.
Fixes: b8680646521 ("bulidman: Move toolchain handling to a function")
Signed-off-by: Simon Glass <[email protected]>
|
|
The default output directory is generally '../' in tests so we end up
trying to create '../.bm-work'. This does not work with azure, so update
these tests to use the temporary directory instead.
Signed-off-by: Simon Glass <[email protected]>
|
|
Enable measuring test coverage for buildman so we can see the gaps. It is
currently at 68%.
Signed-off-by: Simon Glass <[email protected]>
|
|
In poking around it seems that many boards don't define a CONFIG_TARGET
Kconfig variable. This is not strictly necessary, but add an option to
buildman so these can be viewed.
Signed-off-by: Simon Glass <[email protected]>
|
|
Change -D to mean --debug for consistency with other tools. This is not a
commonly used option, so the impact should be minimal.
Signed-off-by: Simon Glass <[email protected]>
|
|
This is useful for some tools and is easily available for buildman. Add
a new --print-arch option.
Signed-off-by: Simon Glass <[email protected]>
|
|
This does not need to be in the class. Move it out to avoid a pylint
warning.
Signed-off-by: Simon Glass <[email protected]>
|
