| Age | Commit message (Collapse) | Author |
|---|
|
We had missed removing the coreboot directory once done, fix this.
Signed-off-by: Tom Rini <[email protected]>
|
|
Now that we have more requirements.txt files we need to grab all of them
for creating our cache. Also, we do longer should install
python3-pyelftools on the host as it's not used.
Signed-off-by: Tom Rini <[email protected]>
|
|
Bring us up to the current Ubuntu "Jammy" tag.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
We should always look in our downloaded toolchains first and then for
host-provided toolchains.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
We do not want to use the host toolchain for building our platforms in
CI (it is both too old, and would be inconsistent with our CI
practices). To do this we need to set the toolchain-prefix so that we
don't end up guessing "/opt/.../aarch64-linux-aarch64-linux-" as the
prefix.
Link: https://source.denx.de/u-boot/custodians/u-boot-dm/-/issues/32
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Remove the rest of the places where we hard-code the version of the
toolchain we're using.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
The xtensa architecture is interesting in that the platforms we support
are only valid on the binary-only toolchains as the DC233C instruction
set requires those toolchains (and not the FSF instruction set). Only
install the binary toolchain on amd64 hosts and only run the tests on
them as well.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Refactor the code to support downloading toolchains for arm64 as well as
x86_64
There doesn't seem to be an xtensa toolchain for arm64 at the same
location, so download that only on x86
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Fix a warning due to the syntax used for PYTHONPATH:
LegacyKeyValueFormat: "ENV key=value" should be used instead of
legacy "ENV key value" format (line 304)
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
We no longer need to install libc6-i386 so we can drop that. Switch to
installing linux-image-generic as that will be available on all hosts,
to provide the /boot/vmlinu* file that's requires for various tools.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Add instructions on how to build the file for multiple architectures.
Add a message indicating what is happening.
Update the documentation as well.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Instead of deleting /var/lib/apt/lists after each relevant RUN line, use
a cache mount as is the current best practices.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
For consistency now, and future ease of testing with non-amd64 hosts,
build grub for all architectures rather than relying on host binaries
for i386/x86_64.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
The current release of grub is 2.12 and it will be good to pick this up
now so that we can update other parts of our stack.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
We had a few places that were not using "make -j$(nproc)" but instead
just plain "make" and so slowing down the overall build.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Add in the x86_64 toolchain, but do not enforce using it for sandbox.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Update to a newer version which supports settings in CMOS RAM and
linear framebuffer.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
This primarily updates our python cache.
Signed-off-by: Tom Rini <[email protected]>
|
|
Using "MAINTAINER" and "Description" have been replaced with
org.opencontainers.image namespace variables.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
This moves us to our latest container image, which is now based on the
current "Jammy" tag.
Signed-off-by: Tom Rini <[email protected]>
|
|
In order to support the reset pytest on QEMU on m68k platforms we need
to grab this change from upstream.
Signed-off-by: Tom Rini <[email protected]>
|
|
Currently, llvm-17 is the stable release. Update our container and CI to
fetch and use that.
Signed-off-by: Tom Rini <[email protected]>
|
|
Bootgen is used in a binman test. The test is skipped without the binary.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Fiptool is used in a binman test. The test is skipped without the binary.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
This moves us to our latest container image, which is now based on the
current "Jammy" tag.
Signed-off-by: Tom Rini <[email protected]>
|
|
To make CI runs rely less on external servers, build a coreboot release
from source and populate /opt/coreboot with the output.
Signed-off-by: Tom Rini <[email protected]>
|
|
As we have had this file for a while now, we should include installing
and populating our pip cache from here as well.
Signed-off-by: Tom Rini <[email protected]>
|
|
Move to the latest "Jammy" tag from Ubuntu.
Signed-off-by: Tom Rini <[email protected]>
|
|
ACPI support for RISC-V requires a recent QEMU.
Upgrade the used QEMU to v8.2.0.
QEMU commit 0c7ffc977195 ("hw/net: cadence_gem: Fix MDIO_OP_xxx values")
is needed to fix the Ethernet PHY driver used by the emulated SiFive
Unleashed Board emulation.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
- We have added more TODO/etc comments since this task was created and
never focused on removing them.
- The output of sloccount isn't preserved or looked at, and if desired
should be in the release stats pages instead somehow.
- The results of cppcheck aren't investigated and require modeling work
to be useful to start with.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
This platform is behind on migrations (it is the sole user of the oldest
legacy version of the USB gadget stack and is long overdue for
migration) and with Pali no longer being a maintainer, we remove this
platform.
Signed-off-by: Tom Rini <[email protected]>
|
|
Move to the latest "Jammy" tag from Ubuntu.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
The latest kernel.org toolchains for gcc are now 13.2.0, so upgrade to
that.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
We need cgpt and futility for building test images. Add them.
Signed-off-by: Simon Glass <[email protected]>
|
|
Move to the latest "Jammy" tag from Ubuntu.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
As this is the current version of the public cross toolchains we use,
upgrade to this now.
Suggested-by: Alexey Brodkin <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
Acked-by: Alexey Brodkin <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Back in the day we relied a lot on Synopsys own build of the GNU tools
for ARC processors, but since then we worked hard on getting all our changes
upstream and for a couple of years now we have ARCompact (AKA ARCv1)
and ARCv2 processors supported very well in upstream GCC, Binutils, GDB etc.
And so there's no need to use Synopsys forks any longer, thus we remove
all the references to that form and use upstream components as majority
of other architectures in U-Boot.
Thanks to Tom for pointing to that left-over!
Signed-off-by: Alexey Brodkin <[email protected]>
Cc: Simon Glass <[email protected]>
Cc: Tom Rini <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Move up to the latest tagged release of QEMU
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
When building qemu, all required submodules (of which we need more than
just dtc) are handled automatically. Currently trying to init the
submodule the way we do results in a git failure.
Reported-by: Alexey Brodkin <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
mkbootimg tool is part of the Android project and it is
used to pack Android boot images such as boot image
and vendor_boot image.
Use the following command to run mkbootimg:
$ python3 -m mkbootimg
Add mkbootimg to the docker file
Signed-off-by: Safae Ouajih <[email protected]>
Tested-by: Mattijs Korpershoek <[email protected]>
|
|
As this is now the stable release, move to using that now for our tests.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Given the number of jobs in CI we have which use python and pip install
packages, we should do this once in the Dockerfile, in order to populate
the cache. We let each job continue to create and use the virtual
environments they need to facilitate making updates to these
environments easier.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Update to using the latest "Jammy" tag as our base.
Signed-off-by: Tom Rini <[email protected]>
|
|
Given efforts to add an m68k target to CI, build qemu for it.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
|
|
I had added this line locally, rebuild the image, but didn't ensure that
I had committed the correct version of the patch as well.
Fixes: 75b031ee4a96 ("Dockerfile: download binaries for Nokia RX-51")
Signed-off-by: Tom Rini <[email protected]>
|
|
Using a pre-built QEMU saves a lot of time when testing.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Downloading files for a test may fail if the server is offline.
It is preferable to provide the files in our Docker image.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Move to the latest tag for "Jammy" and rebuild the containers.
Signed-off-by: Tom Rini <[email protected]>
|
|
Build trace-cmd as part of the docker image, so that trace tests can be
used. Unfortunately the version provided by distributions is a little old
and has bugs. It also does not support specifying the time base for the
trace, which is required to convert microseconds to nanaseconds.
Signed-off-by: Simon Glass <[email protected]>
|
