| Age | Commit message (Collapse) | Author |
|---|
|
Quite a few blank lines are not needed here. Drop these and use the #
mechanism to number paragraphs.
Signed-off-by: Simon Glass <[email protected]>
|
|
One of the changes to the version table was made by mistake. Fix it.
Signed-off-by: Simon Glass <[email protected]>
|
|
When a single test is run we don't need to buffer the test output. This
has the unfortunate side effect of suppressing test output, in particular
the binman output directory normally printed with the -X option. This is
a huge problem since it blocks debugging of tests.
We don't actually know how many tests will be run when we set up the
suite, so as a work-around, assume that test_name being specified
indicates that there is likely only one.
Signed-off-by: Simon Glass <[email protected]>
|
|
Put this at the end so it is easier to copy it from the terminal.
Signed-off-by: Simon Glass <[email protected]>
|
|
Link to patman's documentation from the doc/ directory so that it appears
in the 'make htmldocs' output.
Signed-off-by: Simon Glass <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
When you pass "--no-tree" to checkpatch it disables some extra checks
that are important for Linux. Specifically I want checks like:
warning: DT compatible string "boogie,woogie" appears un-documented
check ./Documentation/devicetree/bindings/
Let's make the default for Linux to _not_ pass --no-tree. We'll have a
config option and command line flag to override.
Signed-off-by: Douglas Anderson <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
On python 3.8.10 (and 3.10), subparsers are not updated with defaults. I
suspect this is related to [1]. Fix this by explicitly updating
subparsers with settings.
[1] https://github.com/python/cpython/issues/89398
Fixes: 3145b63513 ("patman: Update defaults in subparsers")
Signed-off-by: Sean Anderson <[email protected]>
Reviewed-by: Alper Nebi Yasak <[email protected]>
Tested-by: Alper Nebi Yasak <[email protected]>
|
|
While running tests for a python tool, the tests' outputs get printed in
whatever order they happen to run, without any indication as to which
output belongs to which test. Unittest supports capturing these outputs
and printing them as part of the test summaries, but when a failure or
error occurs it switches back to printing as the tests run. Testtools
and subunit tests can do the same as their parts inherit from unittest,
but they don't outright expose this functionality.
On the unittest side, enable output buffering for the custom test result
class. Try to avoid ugly outputs by not printing stdout/stderr before
the test summary for low verbosity levels and for successful tests.
On the subunit side, implement a custom TestProtocolClient that enables
the same underlying functionality and injects the captured streams as
additional test details. This causes them to be merged into their test's
error traceback message, which is later rebuilt into an exception and
passed to our unittest report class.
Signed-off-by: Alper Nebi Yasak <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
By default, unittest test summaries only print extended info about tests
that failed or couldn't run due to an error. Use a custom text result
class to print info about more cases: skipped tests, expected failures
and unexpected successes.
Signed-off-by: Alper Nebi Yasak <[email protected]>
|
|
The python tools' test utilities handle printing test results, but the
output is quite bare compared to an ordinary unittest run. Delegate
printing the results to a unittest text runner, which gives us niceties
like clear separation between each test's result and how long it took to
run the test suite.
Unfortunately it does not print info for skipped tests by default, but
this can be handled later by a custom test result subclass. It also does
not print the tool name; manually print a heading that includes the
toolname so that the outputs of each tool's tests are distinguishable in
the CI output.
Signed-off-by: Alper Nebi Yasak <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
It's possible to request a specific test to run when trying to run a
python tool's tests. If we request a nonexistent test, the unittest
loaders generate a fake test that reports this as an error. However, we
get these fake tests even when the test exists, because test_util can
load tests from multiple places one by one and the test we want only
exists in one.
The test_util helpers currently remove these fake tests when printing
test results, but that's more of a workaround than a proper solution.
Instead, don't even try to load the missing tests.
Signed-off-by: Alper Nebi Yasak <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
When printing a python tool's test results, the entire list of failed
tests and their tracebacks are reprinted for every failed test. This
makes the test output quite unreadable. Fix the loop to print failures
and tracebacks one at a time.
Signed-off-by: Alper Nebi Yasak <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
It is good practice to init all variables in the constructor and pylint
sometimes checks this. Fix it.
Signed-off-by: Simon Glass <[email protected]>
Reported-by: Tom Rini <[email protected]>
|
|
Fix pylint errors that can be fixed and mask those that seem to be
incorrect.
Signed-off-by: Simon Glass <[email protected]>
|
|
Convert this file to snake case and update all files which use it.
Signed-off-by: Simon Glass <[email protected]>
|
|
This method has the same name as its class which is confusing. It is also
annoying when searching the code.
It builds a string with a colour, so rename it to build().
Signed-off-by: Simon Glass <[email protected]>
|
|
Rename this function so that when we convert it to snake case it will not
conflict with the built-in print() function.
Signed-off-by: Simon Glass <[email protected]>
|
|
Convert this file to snake case and update all files which use it.
Signed-off-by: Simon Glass <[email protected]>
|
|
Convert this file to snake case and update all files which use it.
Signed-off-by: Simon Glass <[email protected]>
|
|
Convert this file to snake case and update all files which use it.
Signed-off-by: Simon Glass <[email protected]>
|
|
Convert this file to snake case and update all files which use it.
Signed-off-by: Simon Glass <[email protected]>
|
|
Convert this file to snake case and update all files which use it.
Signed-off-by: Simon Glass <[email protected]>
|
|
Convert this file to snake case and update all files which use it.
Signed-off-by: Simon Glass <[email protected]>
|
|
Convert this file to snake case and update all files which use it.
Signed-off-by: Simon Glass <[email protected]>
|
|
Convert this file to snake case and update all files which use it.
Signed-off-by: Simon Glass <[email protected]>
|
|
Convert this file to snake case and update all files which use it.
Signed-off-by: Simon Glass <[email protected]>
|
|
Convert this file to snake case and update all files which use it.
Signed-off-by: Simon Glass <[email protected]>
|
|
Convert this file to snake case and update all files which use it.
Signed-off-by: Simon Glass <[email protected]>
|
|
Convert this file to snake case and update all files which use it.
Signed-off-by: Simon Glass <[email protected]>
|
|
At present this function does not run the doctests. Allow the caller to
pass these modules in as strings.
Update patman to use this.
Signed-off-by: Simon Glass <[email protected]>
|
|
The compression functions are not actually used by patman, so we don't
need then in the tools module. Also we want to change them to use
bintools, which patman will not support.
Move these into a new comp_util module, within binman.
Signed-off-by: Simon Glass <[email protected]>
|
|
Update the ifwi entry type to use this bintool, instead of running
ifwitool directly. This simplifies the code and provides more
consistency as well as supporting missing bintools.
Signed-off-by: Simon Glass <[email protected]>
|
|
The Run() function automatically uses the PATH variable to locate a tool
when running it. Add a function that does this manually, so we don't have
to run a tool to find out if it is present.
This is needed by the new Bintool class, which wants to check which tools
are present.
Signed-off-by: Simon Glass <[email protected]>
|
|
Reverse the order of the return tuple, so that the filename is first.
This seems more obvious than putting the temporary directory first.
Correct a bug that leaves a space on the final line.
Allow the caller to control the name of the temporary directory.
Signed-off-by: Simon Glass <[email protected]>
|
|
This function is handy for binman as well. Move it into the shared 'tools'
module.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a new function which returns the entire result from running a tool,
not just stdout. Update Run() to use this and to return stdout on error,
if stderr is empty, since some unfortunate tools write their error
output to stdout rather than stderr.
Move building of the PATH to a separate function.
Make the exception catching more specific, to catch just ValueError, since
broad exceptions are a pain to debug.
Signed-off-by: Simon Glass <[email protected]>
|
|
Update the __init__ file to include recently added files.
Add a license header while we are here.
Signed-off-by: Simon Glass <[email protected]>
|
|
Python doesn't naturally support tilde (~) as a user-home marker in
paths, but git-config does. So we need to resolve it before continuing.
We also shouldn't blindly join the top-level tree with the aliasesfile
path, because it might be an absolute path.
This resolves warnings like the following:
Warning: Cannot find alias file '/path/to/source/tree/~/.git-email'
Seen when git-config is like:
$ git config sendemail.aliasesfile
~/.git-email
Signed-off-by: Brian Norris <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Otavio Salvador <[email protected]>
|
|
The Exception base class is a very vague and could be confusing to the
test system. Use the more specific ValueError exception instead.
Signed-off-by: Simon Glass <[email protected]>
|
|
In some communities, it may be necessary to append something after PATCH
in the subject line. For example, the Linux networking subsystem
expects [1] patch subject prefixes like [RFC PATCH net-next 0/99]. This
adds support for such "postfix"s to patman. Although entirely cosmetic,
it is still nice to have.
[1] https://www.kernel.org/doc/html/latest/networking/netdev-FAQ.html#how-do-i-indicate-which-tree-net-vs-net-next-my-patch-should-be-in
Signed-off-by: Sean Anderson <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Hex and int Kconfig options are supposed to have defaults. This is so we
can configure U-Boot without having to enter particular values for the
items that don't have specific values in the board's defconfig file.
If this rule is not followed, then introducing a new Kconfig can produce
a loop like this:
Break things (BREAK_ME) [] (NEW)
Error in reading or end of file.
Break things (BREAK_ME) [] (NEW)
Error in reading or end of file.
The continues forever since buildman passes /dev/null to 'conf', and
the build system just tries again. Eventually there is so much output that
buildman runs out of memory.
We can detect this situation by looking for a symbol (like 'BREAK_ME')
which has no default (the '[]' above) and is marked as new. If this
appears multiple times in the output, we know something is wrong.
Add a filter function for the output which detects this situation. Allow
it to return True to terminate the process. Implement this termination in
cros_subprocess.
With this we get a nice message:
buildman --board sandbox -T0
Building current source for 1 boards (0 threads, 32 jobs per thread)
sandbox: w+ sandbox
+.config:66:warning: symbol value '' invalid for BREAK_ME
+
+Error in reading or end of file.
+make[3]: *** [scripts/kconfig/Makefile:75: syncconfig] Terminated
+make[2]: *** [Makefile:569: syncconfig] Terminated
+make: *** [Makefile:177: sub-make] Terminated
+(** did you define an int/hex Kconfig with no default? **)
Signed-off-by: Simon Glass <[email protected]>
|
|
Signed-off-by: Wolfgang Denk <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
When printing full help output from a tool, we should be able to handle
a PAGER variable which includes arguments, e.g. PAGER='less -F'.
Signed-off-by: Paul Barker <[email protected]>
|
|
Collect the code for printing the full help message of patman, buildman
and binman into a single function in patman.tools.
Signed-off-by: Paul Barker <[email protected]>
|
|
In some cases 'patman status' leaves a blank line between the sign-off
and the tags it collects from patchwork. Fix this and add a test.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a error in patman tool when the commit message contents an invalid
tag "Serie-.*" instead of "Series-.*".
Signed-off-by: Patrick Delaunay <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
If the process outputs a lot of data on stdout this can be quite slow,
since the bytestring is regenerated each time. Use a bytearray instead.
Signed-off-by: Simon Glass <[email protected]>
|
|
At present compression uses the same temporary file for all invocations.
With multithreading this causes the data to become corrupted. Use a
different filename each time.
Signed-off-by: Simon Glass <[email protected]>
|
|
In commit 1e4687aa47ed ("binman: Use target-specific tools when
cross-compiling"), a utility function was implemented to get preferred
compilation tools using environment variables like CC and CROSS_COMPILE.
Although it intended to provide custom default tools (same as those in
the global Makefile) when no relevant variables were set (for example
using "gcc" for "cc"), it is only doing so when CROSS_COMPILE is set and
returning the literal name of the tool otherwise.
Remove the check for an empty CROSS_COMPILE, which makes the function
use it as an empty prefix to the custom defaults and return the intended
executables.
Fixes: 1e4687aa47ed ("binman: Use target-specific tools when cross-compiling")
Signed-off-by: Alper Nebi Yasak <[email protected]>
|
|
Parse each empty-line-delimited message separately. This saves having to
deal with all the different line content styles, we only care about the
header ERROR | WARNING | NOTE...
Also make checkpatch print line information for a uboot specific
warning.
Signed-off-by: Evan Benn <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
