| Age | Commit message (Collapse) | Author |
|---|
|
Tom Rini <[email protected]> says:
This series switches to always using $(PHASE_) in Makefiles when
building rather than $(PHASE_) or $(XPL_). It also starts on documenting
this part of the build, but as a follow-up we need to rename
doc/develop/spl.rst and expand on explaining things a bit.
Link: https://lore.kernel.org/r/[email protected]
|
|
It is confusing to have both "$(PHASE_)" and "$(XPL_)" be used in our
Makefiles as part of the macros to determine when to do something in our
Makefiles based on what phase of the build we are in. For consistency,
bring this down to a single macro and use "$(PHASE_)" only.
Signed-off-by: Tom Rini <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request efi-2025-07-rc1
CI:
* https://source.denx.de/u-boot/custodians/u-boot-efi/-/pipelines/25648
Documentation:
* Update authenticated capsules documentation
UEFI:
* Add support for loading FIT images including initrd
- efi_loader: efi_load_initrd: provide a memory mapped initrd
- efi_loader: binary_run: register an initrd
- bootm: add support for initrd in do_bootm_efi
* efi_selftest: remove un-needed NULL checks
* efi: Fix efiboot for payloads loaded from memory
* Print extra information from the bootmgr
* Move public cert for capsules to .rodata
* Set EFI capsule dfu_alt_info env explicitly
* Make FDT extra space configurable
* Install the ACPI table from the bloblist
* Handle GD_FLG_SKIP_RELOC
* Handle malloc() errors
Others:
* acpi: select CONFIG_BLOBLIST
* smbios: select CONFIG_BLOBLIST
* xilinx: dfu: Fill directly update_info.dfu_string
* cmd: fwu: Dump custom fields from mdata structure
* board: remove capsule update support in set_dfu_alt_info()
|
|
%s/require/required/
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Allow invoking fit_check_sig without the key parameter, allowing to
validate only checksums and hashes for unsigned images.
Signed-off-by: Daniel Golle <[email protected]>
|
|
The cflags and ldflags of preload_check_sign depend on the openssl
package thus pkg-config is needed to get the location where openssl
is installed.
This fix a potential build failure when openssl is not from the
distro and installed in a varied place.
Signed-off-by: Raymond Mao <[email protected]>
|
|
If a series is sent without a cover letter, there is no indication of
the base commit. Add support for this, since single patches of small
series may not always have a cover letter.
Signed-off-by: Simon Glass <[email protected]>
|
|
Fix an 'EFL' typo. It should be 'ELF'.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Neha Malcom Francis <[email protected]>
|
|
It is helpful to know which commit patches are based on, even if that
commit might not be available to readers. Add a tag for this in the
cover letter.
Also add the local-branch name since that may be useful to the writer.
Signed-off-by: Simon Glass <[email protected]>
|
|
- Bump up "Jammy" tag to jammy-20250404
- Include most recent changes to the Dockerfile itself
Signed-off-by: Tom Rini <[email protected]>
|
|
We had previously gotten this package through a chain of dependencies
with guestfs-tools. Now that we no longer install that package, install
fdisk (for sfdisk) directly.
Fixes: eb1b90ec57a4 ("Dockerfile: Update to drop virt-make-fs packages")
Signed-off-by: Tom Rini <[email protected]>
|
|
There are some reference platforms from Arm which are not found in QEMU
but instead in the FVP tool. As we can make use of this in CI later on,
download and extract it in our Dockerfile today.
Signed-off-by: Tom Rini <[email protected]>
|
|
In preparation for using TF-A more in our CI loops, switch to the
current release tag for TF-A.
Signed-off-by: Tom Rini <[email protected]>
|
|
Install byacc required to build cst from source.
Signed-off-by: Leonard Anderweit <[email protected]>
|
|
Outside of changing versions here the other visible change is that we
tell grub that riscv64 does not have "large model" support. Without this
change the resulting mkimage is non-functional. This is known upstream
already.
Link: https://savannah.gnu.org/bugs/?65909
Signed-off-by: Tom Rini <[email protected]>
|
|
Tom Rini <[email protected]> says:
One thing that Simon Glass has noted is that our pytest run time keeps
getting longer. Looking at:
https://source.denx.de/u-boot/u-boot/-/pipelines/25011/test_report?job_name=sandbox%20test.py%3A%20%5Bfast%20amd64%5D
we can see that some of the longest running tests are a little puzzling.
It turns out that we have two ways of making filesystem images without
requiring root access and one of them is significantly slower than the
other. This series changes us from using virt-make-fs to only using the
mk_fs helper that currently resides in test_ut.py which uses standard
userspace tools. The final result can be seen at:
https://source.denx.de/u-boot/u-boot/-/pipelines/25015/test_report?job_name=sandbox%20test.py%3A%20%5Bfast%20amd64%5D
and the tests changed here now run much quicker.
Link: https://lore.kernel.org/r/[email protected]
|
|
Now that we do not need nor want people to use virt-make-fs for
filesystem tests, remove the related packages from the installation
list.
Signed-off-by: Tom Rini <[email protected]>
|
|
Manorit Chawdhry <[email protected]> says:
The series adds support for J742S2 family of SoCs. Also adds J742S2 EVM
Support and re-uses most of the stuff from the superset device J784s4.
This device is a subset of J784S4 and shares the same memory map and
thus the code is being reused from J784S4 to avoid duplication.
It initially cleans up the J784s4 and AM69 files so that they can be
re-usable for j742s2 and then it introduces J742S2.
The DT for the following SoC will be coming to U-boot during 6.13 Sync
so the series is kept as RFC till then.
Here are some of the salient features of the J742S2 automotive grade
application processor:
The J742S2 SoC belongs to the K3 Multicore SoC architecture platform,
providing advanced system integration in automotive, ADAS and industrial
applications requiring AI at the network edge. This SoC extends the K3
Jacinto 7 family of SoCs with focus on raising performance and
integration while providing interfaces, memory architecture and compute
performance for multi-sensor, high concurrency applications.
Some changes that this devices has from J784S4 are:
* 4x Cortex-A72 vs 8x Cortex-A72
* 3x C7x DSP vs 4x C7x DSP
* 4 port ethernet switch vs 8 port ethernet switch
* 2 DDR controller vs 4 DDR controller
Test logs:
https://gist.github.com/manorit2001/f7df0e8cca1e9973b4361f0559c6f53d
Link: https://lore.kernel.org/r/[email protected]
|
|
Dynamically going through the subnode array and deleting leads to
templates being skipped from deletion when templates are consecutive in
the subnode list. Prevent this from happening by first parsing the DT
and then deleting the nodes. Add a testcase as well for this cornercase.
Signed-off-by: Neha Malcom Francis <[email protected]>
|
|
Marek Vasut <[email protected]> says:
Import exfat-fuse libexfat, add U-Boot filesystem layer porting glue
code and wire exfat support into generic filesystem support code. This
adds exfat support to U-Boot.
Fill in generic filesystem interface for mkdir and rm commands.
Make filesystem tests test the generic interface as well as exfat,
to make sure this code does not fall apart.
Link: https://github.com/relan/exfat/commits/0b41c6d3560d ("CI: bump FreeBSD to 13.1.")
Link: https://lore.kernel.org/r/[email protected]
|
|
Add tests for the exfat filesystem. These tests are largely an
extension of the FS_GENERIC tests with the following notable
exceptions.
The filesystem image for exfat tests is generated using combination
of exfatprogs mkfs.exfat and python fattools. The fattols are capable
of generating exfat filesystem images too, but this is not used, the
fattools are only used as a replacement for dosfstools 'mcopy' and
'mdir', which are used to insert files and directories into existing
fatfs images and list existing fatfs images respectively, without the
need for superuser access to mount such images.
The exfat filesystem has no filesystem specific command, there is only
the generic filesystem command interface, therefore check_ubconfig()
has to special case exfat and skip check for CONFIG_CMD_EXFAT and
instead check for CONFIG_FS_EXFAT.
Signed-off-by: Marek Vasut <[email protected]>
|
|
This file has about 40 pylint warnings, but no errors.
Quite a few of these warnings have been there for a while, but most are
coming from newer versions of pylint, where people come up with new
warnings.
The f-string warning is the most common one:
C0209: Formatting a regular string which could be an f-string
That feature was not available when the code was written, but it is
often more convenient than using % with a list of arguments.
This patches reduces the number of warnings in this file, with 7 left
remaining.
Signed-off-by: Simon Glass <[email protected]>
|
|
Prepare v2025.04-rc5
|
|
The header of the StarFive U-Boot SPL file u-boot-spl.normal.out has a
field indicating the payload size. When copying U-Boot SPL from a
partition the copied file might be too long.
Currently in this situation a misleading error message 'Incorrect CRC32' is
written.
We must use the payload size and not the file size when calculating the
CRC32.
Write a warning if the file is too long indicating the correct size. This
enables the user to truncate the file accordingly.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
This gives an error with newer Python version, so fix it.
Signed-off-by: Simon Glass <[email protected]>
|
|
HOSTCFLAGS of some tools components (image-host, rsa-sign and
ecdsa-libcrypto) depend on the directory where openssl is installed.
Add them via pkg-config.
This fixes a potential build failure in tools when openssl in installed
in varied directories.
Signed-off-by: Raymond Mao <[email protected]>
Reviewed-by: Peter Robinson <[email protected]>
|
|
We had missed removing the coreboot directory once done, fix this.
Signed-off-by: Tom Rini <[email protected]>
|
|
This series from Leonard Anderweit <[email protected]> provides some
improvements to the binman tool and i.MX specific tooling then makes use
of it.
Link: https://lore.kernel.org/r/[email protected]
|
|
Build the imx code singing tool from source instead of relying on the
distro to provide the tool.
Use the debian/unstable branch because the default branch is outdated.
The binary is supposed to be build with docker, work around that by selecting
the correct Makefile directly.
Also append the description and add a link to documentation.
Signed-off-by: Leonard Anderweit <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add optional argument make_path to build_from git. The new argument
allows specifying the path to a Makefile in case it is not in the root
of the git repo.
Also adjust the corresponding test.
Signed-off-by: Leonard Anderweit <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add optional argument git_branch to build_from_git. The new argument
allows specifying which branch of the repo to use.
Signed-off-by: Leonard Anderweit <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
This uses Heinrich's merge of lib/efi_loader/efi_net.c which results in
no changes.
|
|
Simon Glass <[email protected]> says:
This series adds comments and fixes pylint warnings in the command
library. It also introduces a new, simpler way of running a single
command.
Link: https://lore.kernel.org/r/[email protected]
|
|
Add a helper to avoid needing to use a list within a list for this
simple case.
Update existing users of runpipe() to use this where possible.
Signed-off-by: Simon Glass <[email protected]>
|
|
This file has a lot of warnings. Before adding any more features, fix
those which are straightforward to resolve.
Signed-off-by: Simon Glass <[email protected]>
|
|
Throwing an Exception is not very friendly since it is the top-level
class of all exceptions. Declare a new class instead.
Signed-off-by: Simon Glass <[email protected]>
|
|
This should be in capitals and defined at the start of the file. Update
it.
Signed-off-by: Simon Glass <[email protected]>
|
|
A discussion on the mailing list about dealing with block offsets and
binman symbols made me think that something is wrong with how Binman
deals with the skip-at-start property.
The feature was originally designed to handle x86 ROMs, which are mapped
at the top of the address space. That seemed too specific, whereas
skipping some space at the start seemed more generally useful.
It has proved useful. For example, rockchip images start at block 64,
so a skip-at-start of 0x8000 deals with this.
But it doesn't actually work correctly, since the image_pos value does
not give the actual position on the media.
Fix this and update the documentation, moving it into the 'section'
section.
Signed-off-by: Simon Glass <[email protected]>
|
|
The property is named end_at_4gb so name the variable the same, to avoid
confusion.
Signed-off-by: Simon Glass <[email protected]>
|
|
builds"
Paul HENRYS <[email protected]> says:
This serie of patches adds a new tool to authenticate files signed with
a preload header. This tool is also used in the tests to actually
verify the authenticity of the file signed with such a preload header.
Link: https://lore.kernel.org/r/[email protected]
|
|
Use preload_check_sign to authenticate the generated image when testing the
preload signature in testPreLoad().
Signed-off-by: Paul HENRYS <[email protected]>
|
|
preload_check_sign is added so that it can be used to authenticate images
signed with the pre-load signature supported by binman and U-Boot.
It could also be used to test the signature in binman tests signing
images with the pre-load.
Signed-off-by: Paul HENRYS <[email protected]>
|
|
Add an empty inline declaration when compiling tools for a host where
unmap_sysmem() is not defined.
Signed-off-by: Paul HENRYS <[email protected]>
|
|
rsa_verify_openssl() is used in lib/rsa/rsa-verify.c to authenticate data
when building host tools.
Signed-off-by: Paul HENRYS <[email protected]>
|
|
Dynamic memory, referenced by 'line', is allocated at imx8mimage.c:187
by calling function 'getline' and lost at imx8mimage.c:210.
Signed-off-by: Maks Mishin <[email protected]>
|
|
Dynamic memory, referenced by 'line', is allocated at imx8image.c:270
by calling function 'getline' and lost at imx8image.c:294.
Signed-off-by: Maks Mishin <[email protected]>
|
|
Dynamic memory, referenced by 'line', is allocated at imximage.c:761
by calling function 'getline' and lost at imximage.c:793.
Signed-off-by: Maks Mishin <[email protected]>
|
|
Prepare v2025.04-rc3
|
|
This reverts commit c8750efe02c20725388dd4279896aaf306acfad4, reversing
changes made to 8c6cf8aeea7e57ca686de8b765e4baf3a7ef1fa7.
Unfortunately these changes do not build on macOS hosts.
Signed-off-by: Tom Rini <[email protected]>
|
|
Recent versions of this module call time.perf_counter() so add a patch
for this also.
Signed-off-by: Simon Glass <[email protected]>
Reported-by: Tom Rini <[email protected]>
|
