| Age | Commit message (Collapse) | Author |
|---|
|
For all images except SATA is data offset in bytes. For SATA it is in LBA
format (number of sectors). This is how Marvell BootROM interprets it.
Signed-off-by: Pali Rohár <[email protected]>
|
|
Use for it pretty print function: genimg_print_size(). This makes it more
human readable, like other offset and sizes printed by this tool.
Signed-off-by: Pali Rohár <[email protected]>
|
|
In Dove functional specification, which use kwbimage v0, is also defined
nand block size field. So dump NAND_BLKSZ also for v0 images.
In Kirkwood functional specification, which also use kwbimage v0, this
field is not defined. So when it is zero and Kirkwood is detected, do not
dump it.
Fixes: f76ae2571fe0 ("tools: kwbimage: Add support for dumping extended and binary v0 headers")
Signed-off-by: Pali Rohár <[email protected]>
|
|
mkimage -F option (re-sign existing FIT image) signaled by fflag is not
supported by kwbimage. So mark its usage as invalid parameter.
Signed-off-by: Pali Rohár <[email protected]>
|
|
All fields in kwbimage header are in little endian format.
Signed-off-by: Pali Rohár <[email protected]>
|
|
Checksum for v0 image must be generated after filling all fields in the
main header. Otherwise it would be invalid.
Exactly same problem for v1 images was already fixed in the past in commit
9203c73895ab ("tools: kwbimage: Fix checksum calculation for v1 images").
Fixes: 5c61710c9880 ("tools: kwbimage: Properly set srcaddr in kwbimage v0")
Signed-off-by: Pali Rohár <[email protected]>
|
|
kwbimage nandblocksize field is in 64 kB unit, but NAND_BLKSZ command
expects it in bytes. So do required unit conversion.
Also zero value in nandblocksize field has special meaning. When this field
is set to zero, the default block size is used. This default size is
defined by the NAND flash page size (16 KB for a 512B page or small page
NAND and 64 KB for a large page NAND flash).
Fixes: 1a8e6b63e24f ("tools: kwbimage: Dump kwbimage config file on '-p -1' option")
Signed-off-by: Pali Rohár <[email protected]>
|
|
Value 0x0 for NAND_BADBLK_LOCATION/nandbadblklocation means that BBI is on
the first or second page and value 0x1 means that BBI is on the last page.
This indicates also NAND Flash Technology, value 0x0 is SLC NAND and value
0x1 is MLC NAND.
Therefore we need to dump NAND_BADBLK_LOCATION also when it is zero.
Note that in v0 images, nandbadblklocation field overlaps with ddrinitdelay
field in one union. ddrinitdelay is used in Kirkwood and nandbadblklocation
is used in Dove. For Dove images is_v0_ext should be set, so use it to
distinguish if nandbadblklocation is available or not. In v1 images there
is always nandbadblklocation field.
Fixes: 1a8e6b63e24f ("tools: kwbimage: Dump kwbimage config file on '-p -1' option")
Signed-off-by: Pali Rohár <[email protected]>
|
|
Fixes: 1a8e6b63e24f ("tools: kwbimage: Dump kwbimage config file on '-p -1' option")
Signed-off-by: Pali Rohár <[email protected]>
|
|
Upper-bound for iterating for-loop over register set entries is incorrect.
Fix it byt calculating correct number of entries.
And fix also dumping the last entry DATA_DELAY, which is the last and not
first (zero).
Fixes: 1a8e6b63e24f ("tools: kwbimage: Dump kwbimage config file on '-p -1' option")
Signed-off-by: Pali Rohár <[email protected]>
|
|
Show image type and version during parsing of kwbimage.
And show reasons in error messages when parsing failed.
This can help to debug issues with invalid images.
Signed-off-by: Pali Rohár <[email protected]>
|
|
Marvell BootROM interprets execaddr of SPI/NOR XIP images as relative byte
offset from the from the beginning of the flash device. So if data image
offset and execute offset are not same then it is needed to adjust them
also in DDR RAM.
Fixes: f2c644e0b8bc ("tools: kwboot: Patch destination address to DDR area for SPI image")
Signed-off-by: Pali Rohár <[email protected]>
|
|
Some NOR images may be execute-in-place and do not contain DDR init code in
its kwbimage header. Such images cannot be booted over UART as BootROM
loads them to RAM. Add check that kwbimage contains DDR init code in its
header (either as binary code header or as the simple register-value set).
In some cases it is possible to load very small image into L2SRAM and when
DDR init code is not required. So check for L2SRAM load address and skip
DDR init code check in this case.
Signed-off-by: Pali Rohár <[email protected]>
|
|
Before starting parsing of kwbimage, first validate that all optional v1
headers and correct. This prevents kwboot crashes on invalid input.
Signed-off-by: Pali Rohár <[email protected]>
|
|
The 32-bit data checksum in UART image is not checked by the BootROM and
also Marvell tools do not generate it.
So if data checksum stored in UART image does not match calculated checksum
from the image then treat those checksum bytes as part of the executable
image code (and not as the checksum) and for compatibility with the rest of
the code manually insert data checksum into the in-memory image after the
executable code, without overwriting it.
This should allow to boot UART images generated by Marvell tools.
Signed-off-by: Pali Rohár <[email protected]>
|
|
Add information of all available image types and where they should be
stored. Storage location offsets where documented from the disassembly of
the A385 BootROM image dump.
Signed-off-by: Pali Rohár <[email protected]>
|
|
Add reference to Avanta Boot Flow documentation, BobCat2, AlleyCat3 and
PONCat3 BootROM Firmware documentation and links to public Marvell tools:
hdrparser.c and doimage.c
Signed-off-by: Pali Rohár <[email protected]>
|
|
Despite the official specification, Marvell BootROM does not interpret
srcaddr from SATA image as number of sectors the beginning of the hard
drive, but as number of sectors relative to the main header.
To parse SATA kwbimage in the same way as Marvell BootROM, it is needed to
interpret srcaddr as relative offset to the main header. This change fixes
loading of SATA images via kwboot over UART.
Fixes: 792e42355083 ("tools: kwboot: Patch source address in image header")
Signed-off-by: Pali Rohár <[email protected]>
|
|
Despite the official specification, Marvell BootROM does not interpret
srcaddr from SATA image as number of sectors the beginning of the hard
drive, but as number of sectors relative to the main header.
The main header is stored at absolute sector number 1. So do not add or
subtract it when calculating with relative offsets to the main header.
Fixes: 501a54a29cc2 ("tools: kwbimage: Fix generation of SATA, SDIO and PCIe images")
Fixes: 5c61710c9880 ("tools: kwbimage: Properly set srcaddr in kwbimage v0")
Fixes: e0c243c398a7 ("tools: kwbimage: Validate data checksum of v1 images")
Fixes: aa6943ca3122 ("kwbimage: Add support for extracting images via dumpimage tool")
Signed-off-by: Pali Rohár <[email protected]>
|
|
Despite the official specification, Marvell BootROM does not interpret
srcaddr from SDIO image as offset in number of sectors (like for SATA
image), but as offset in bytes (like for all other images except SATA).
To parse SDIO kwbimage in the same way as Marvell BootROM, it is needed to
interpret srcaddr in bytes. This change fixes loading of SDIO images via
kwboot over UART.
Fixes: 792e42355083 ("tools: kwboot: Patch source address in image header")
Signed-off-by: Pali Rohár <[email protected]>
|
|
Despite the official specification, Marvell BootROM does not interpret
srcaddr from SDIO image as offset in number of sectors (like for SATA
image), but as offset in bytes (like for all other images except SATA).
To generate SDIO kwbimage compatible with Marvell BootROM, it is needed to
have srcaddr in bytes. This change fixes SDIO images for Armada 38x SoCs.
Fixes: 501a54a29cc2 ("tools: kwbimage: Fix generation of SATA, SDIO and PCIe images")
Fixes: 5c61710c9880 ("tools: kwbimage: Properly set srcaddr in kwbimage v0")
Fixes: e0c243c398a7 ("tools: kwbimage: Validate data checksum of v1 images")
Fixes: aa6943ca3122 ("kwbimage: Add support for extracting images via dumpimage tool")
Signed-off-by: Pali Rohár <[email protected]>
|
|
Add support for rk3588 package header in mkimage tool.
Signed-off-by: Jagan Teki <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Using the mkimage entry with the multiple-data-files prop and having a
missing external blob result in an unexpected ValueError exception using
the --allow-missing flag.
ValueError: Filename 'missing.bin' not found in input path (...)
Fix this by using _pathname that is resolved by ObtainContents for blob
entries, ObtainContents also handles allow missing for external blobs.
Mark mkimage entry as missing and return without running mkimage when
missing entries is reported by CheckMissing.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
The current init size limit of 76KiB is too big to fit in the 64KiB SRAM
on RK3568, sync init size limit from vendor u-boot to fix this.
Set init size limit to 60KiB (-16KiB) for RK3568.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Latest vendor TPL for RK3328 has grown past the current init size limit
of 28KiB, sync the init size limit from vendor u-boot to fix this.
Set init size limit to 30KiB (+2KiB) for RK3328.
This makes it possible to use latest vendor TPL on RK3328 without
getting a size limit error running the mkimage command.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
The rockchip-tpl entry can be used when an external TPL binary should be
used instead of the normal U-Boot TPL.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
Tested-by: Eugen Hristev <[email protected]>
|
|
Prepare v2023.04-rc3
|
|
I had added this line locally, rebuild the image, but didn't ensure that
I had committed the correct version of the patch as well.
Fixes: 75b031ee4a96 ("Dockerfile: download binaries for Nokia RX-51")
Signed-off-by: Tom Rini <[email protected]>
|
|
Using a pre-built QEMU saves a lot of time when testing.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Downloading files for a test may fail if the server is offline.
It is preferable to provide the files in our Docker image.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add the 'missing-msg' for more detailed output
on missing system firmware.
Signed-off-by: Rick Chen <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
Reviewed-by: Yu Chien Peter Lin <[email protected]>
|
|
Help ensure that these don't creep into development by adding a check in
checkpatch for them.
Signed-off-by: Simon Glass <[email protected]>
|
|
Now that Linux has accepted these tags, update the dtoc tool to use them.
Signed-off-by: Simon Glass <[email protected]>
|
|
Update various build and test components to use the new schema.
Signed-off-by: Simon Glass <[email protected]>
|
|
At present we show 'main section' as the top-level section name. It may
be more helpful to show the actual image name. This is tricky because
Image is a parent class of Entry_section, so there is no distinction
between an image and a section.
Update it to show the image name.
Signed-off-by: Simon Glass <[email protected]>
|
|
Move to the latest tag for "Jammy" and rebuild the containers.
Signed-off-by: Tom Rini <[email protected]>
|
|
Build trace-cmd as part of the docker image, so that trace tests can be
used. Unfortunately the version provided by distributions is a little old
and has bugs. It also does not support specifying the time base for the
trace, which is required to convert microseconds to nanaseconds.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a second variant of the flame graph that shows records in terms of the
number of microseconds used by each call stack. This is a useful way of
seeing where time is going within the execution of U-Boot.
This requires a call stack that records the start time of each function,
as well as a way of subtracting all time consumed by child functions, so
that this time is not counted twice by the flamegraph. The time values in
the output are just for the function itself, not for its children.
Signed-off-by: Simon Glass <[email protected]>
|
|
It is useful to see how many times each function is called, particularly
in the context of its callers. A flamegraph is a way of showing this.
Support output in this format which can be used by the flamegraph.pl
script, to generate an SVG image for browsing.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add support for writing ftrace records in the 'funcgraph' format, which
shows function entry and exit points as well as the time taken by each
function.
Signed-off-by: Simon Glass <[email protected]>
|
|
Use the information in the trace header instead of reading it from the
trace records. Add debugging to check that System.map and the trace header
agree on this value.
Signed-off-by: Simon Glass <[email protected]>
|
|
This feature was only partly implemented and serves no current purpose.
Drop it.
Signed-off-by: Simon Glass <[email protected]>
|
|
The old text format is not much used anymore. Instead a new trace-cmd tool
has introduced a binary format for trace records.
Add support for generating this format. This involves removing the old
text format, adding various helpers for the new format and adjusting the
code to use an output file instead of stdout.
Signed-off-by: Simon Glass <[email protected]>
|
|
The current use of 'profile' in some places is confusing. Update the code
to use the word 'trace' consistently. Change the flags to better match
their meaning and add some more comments.
Signed-off-by: Simon Glass <[email protected]>
|
|
Per https://www.qemu.org/contribute/ the official location of the QEMU
sources are https://gitlab.com/qemu-project/qemu.git
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
The readme file for buildman is called buildman.rst.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
This is very old and does not appear to be used. The CONFIG option
enabling it is no-longer present. Drop it.
Signed-off-by: Simon Glass <[email protected]>
|
|
This seems to have been used by ppc4xx which was removed a while back.
The Kconfig does not exist so it is never built. Drop it.
Signed-off-by: Simon Glass <[email protected]>
|
|
This is not a Kconfig option so we should not be setting it in the
Makefile. Rename it to use a CFS_ prefix, since this is still used in
mxsimage.c
In general tools should support all the features without reference to
CONFIG options, but this is left to the maintainer to look at.
Signed-off-by: Simon Glass <[email protected]>
|
|
Sometimes the Makefile rules or source code refers to Kconfig options
which don't exist. Update the moveconfig tool to check this and produce
a series of reports about inconsistencies.
This can then be used to generate patches to correct the problems.
Signed-off-by: Simon Glass <[email protected]>
|
