| Age | Commit message (Collapse) | Author |
|---|
|
Dynamically going through the subnode array and deleting leads to
templates being skipped from deletion when templates are consecutive in
the subnode list. Prevent this from happening by first parsing the DT
and then deleting the nodes. Add a testcase as well for this cornercase.
Signed-off-by: Neha Malcom Francis <[email protected]>
|
|
Marek Vasut <[email protected]> says:
Import exfat-fuse libexfat, add U-Boot filesystem layer porting glue
code and wire exfat support into generic filesystem support code. This
adds exfat support to U-Boot.
Fill in generic filesystem interface for mkdir and rm commands.
Make filesystem tests test the generic interface as well as exfat,
to make sure this code does not fall apart.
Link: https://github.com/relan/exfat/commits/0b41c6d3560d ("CI: bump FreeBSD to 13.1.")
Link: https://lore.kernel.org/r/[email protected]
|
|
Add tests for the exfat filesystem. These tests are largely an
extension of the FS_GENERIC tests with the following notable
exceptions.
The filesystem image for exfat tests is generated using combination
of exfatprogs mkfs.exfat and python fattools. The fattols are capable
of generating exfat filesystem images too, but this is not used, the
fattools are only used as a replacement for dosfstools 'mcopy' and
'mdir', which are used to insert files and directories into existing
fatfs images and list existing fatfs images respectively, without the
need for superuser access to mount such images.
The exfat filesystem has no filesystem specific command, there is only
the generic filesystem command interface, therefore check_ubconfig()
has to special case exfat and skip check for CONFIG_CMD_EXFAT and
instead check for CONFIG_FS_EXFAT.
Signed-off-by: Marek Vasut <[email protected]>
|
|
This file has about 40 pylint warnings, but no errors.
Quite a few of these warnings have been there for a while, but most are
coming from newer versions of pylint, where people come up with new
warnings.
The f-string warning is the most common one:
C0209: Formatting a regular string which could be an f-string
That feature was not available when the code was written, but it is
often more convenient than using % with a list of arguments.
This patches reduces the number of warnings in this file, with 7 left
remaining.
Signed-off-by: Simon Glass <[email protected]>
|
|
Prepare v2025.04-rc5
|
|
The header of the StarFive U-Boot SPL file u-boot-spl.normal.out has a
field indicating the payload size. When copying U-Boot SPL from a
partition the copied file might be too long.
Currently in this situation a misleading error message 'Incorrect CRC32' is
written.
We must use the payload size and not the file size when calculating the
CRC32.
Write a warning if the file is too long indicating the correct size. This
enables the user to truncate the file accordingly.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
This gives an error with newer Python version, so fix it.
Signed-off-by: Simon Glass <[email protected]>
|
|
HOSTCFLAGS of some tools components (image-host, rsa-sign and
ecdsa-libcrypto) depend on the directory where openssl is installed.
Add them via pkg-config.
This fixes a potential build failure in tools when openssl in installed
in varied directories.
Signed-off-by: Raymond Mao <[email protected]>
Reviewed-by: Peter Robinson <[email protected]>
|
|
We had missed removing the coreboot directory once done, fix this.
Signed-off-by: Tom Rini <[email protected]>
|
|
This series from Leonard Anderweit <[email protected]> provides some
improvements to the binman tool and i.MX specific tooling then makes use
of it.
Link: https://lore.kernel.org/r/[email protected]
|
|
Build the imx code singing tool from source instead of relying on the
distro to provide the tool.
Use the debian/unstable branch because the default branch is outdated.
The binary is supposed to be build with docker, work around that by selecting
the correct Makefile directly.
Also append the description and add a link to documentation.
Signed-off-by: Leonard Anderweit <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add optional argument make_path to build_from git. The new argument
allows specifying the path to a Makefile in case it is not in the root
of the git repo.
Also adjust the corresponding test.
Signed-off-by: Leonard Anderweit <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add optional argument git_branch to build_from_git. The new argument
allows specifying which branch of the repo to use.
Signed-off-by: Leonard Anderweit <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
This uses Heinrich's merge of lib/efi_loader/efi_net.c which results in
no changes.
|
|
Simon Glass <[email protected]> says:
This series adds comments and fixes pylint warnings in the command
library. It also introduces a new, simpler way of running a single
command.
Link: https://lore.kernel.org/r/[email protected]
|
|
Add a helper to avoid needing to use a list within a list for this
simple case.
Update existing users of runpipe() to use this where possible.
Signed-off-by: Simon Glass <[email protected]>
|
|
This file has a lot of warnings. Before adding any more features, fix
those which are straightforward to resolve.
Signed-off-by: Simon Glass <[email protected]>
|
|
Throwing an Exception is not very friendly since it is the top-level
class of all exceptions. Declare a new class instead.
Signed-off-by: Simon Glass <[email protected]>
|
|
This should be in capitals and defined at the start of the file. Update
it.
Signed-off-by: Simon Glass <[email protected]>
|
|
A discussion on the mailing list about dealing with block offsets and
binman symbols made me think that something is wrong with how Binman
deals with the skip-at-start property.
The feature was originally designed to handle x86 ROMs, which are mapped
at the top of the address space. That seemed too specific, whereas
skipping some space at the start seemed more generally useful.
It has proved useful. For example, rockchip images start at block 64,
so a skip-at-start of 0x8000 deals with this.
But it doesn't actually work correctly, since the image_pos value does
not give the actual position on the media.
Fix this and update the documentation, moving it into the 'section'
section.
Signed-off-by: Simon Glass <[email protected]>
|
|
The property is named end_at_4gb so name the variable the same, to avoid
confusion.
Signed-off-by: Simon Glass <[email protected]>
|
|
builds"
Paul HENRYS <[email protected]> says:
This serie of patches adds a new tool to authenticate files signed with
a preload header. This tool is also used in the tests to actually
verify the authenticity of the file signed with such a preload header.
Link: https://lore.kernel.org/r/[email protected]
|
|
Use preload_check_sign to authenticate the generated image when testing the
preload signature in testPreLoad().
Signed-off-by: Paul HENRYS <[email protected]>
|
|
preload_check_sign is added so that it can be used to authenticate images
signed with the pre-load signature supported by binman and U-Boot.
It could also be used to test the signature in binman tests signing
images with the pre-load.
Signed-off-by: Paul HENRYS <[email protected]>
|
|
Add an empty inline declaration when compiling tools for a host where
unmap_sysmem() is not defined.
Signed-off-by: Paul HENRYS <[email protected]>
|
|
rsa_verify_openssl() is used in lib/rsa/rsa-verify.c to authenticate data
when building host tools.
Signed-off-by: Paul HENRYS <[email protected]>
|
|
Dynamic memory, referenced by 'line', is allocated at imx8mimage.c:187
by calling function 'getline' and lost at imx8mimage.c:210.
Signed-off-by: Maks Mishin <[email protected]>
|
|
Dynamic memory, referenced by 'line', is allocated at imx8image.c:270
by calling function 'getline' and lost at imx8image.c:294.
Signed-off-by: Maks Mishin <[email protected]>
|
|
Dynamic memory, referenced by 'line', is allocated at imximage.c:761
by calling function 'getline' and lost at imximage.c:793.
Signed-off-by: Maks Mishin <[email protected]>
|
|
Prepare v2025.04-rc3
|
|
This reverts commit c8750efe02c20725388dd4279896aaf306acfad4, reversing
changes made to 8c6cf8aeea7e57ca686de8b765e4baf3a7ef1fa7.
Unfortunately these changes do not build on macOS hosts.
Signed-off-by: Tom Rini <[email protected]>
|
|
Recent versions of this module call time.perf_counter() so add a patch
for this also.
Signed-off-by: Simon Glass <[email protected]>
Reported-by: Tom Rini <[email protected]>
|
|
Paul HENRYS <[email protected]> says:
This serie of patches adds a new tool to authenticate files signed
with a preload header.
This tool is also used in the tests to actually verify the
authenticity of the file signed with such a preload header.
Link: https://lore.kernel.org/r/[email protected]
|
|
Use preload_check_sign to authenticate the generated image when testing the
preload signature in testPreLoad().
Signed-off-by: Paul HENRYS <[email protected]>
|
|
preload_check_sign is added so that it can be used to authenticate images
signed with the pre-load signature supported by binman and U-Boot.
It could also be used to test the signature in binman tests signing
images with the pre-load.
Signed-off-by: Paul HENRYS <[email protected]>
|
|
Add an empty inline declaration when compiling tools for a host where
unmap_sysmem() is not defined.
Signed-off-by: Paul HENRYS <[email protected]>
|
|
rsa_verify_openssl() is used in lib/rsa/rsa-verify.c to authenticate data
when building host tools.
Signed-off-by: Paul HENRYS <[email protected]>
|
|
This newer pylint produces errors about variables possibly being used
before being set. Adjust the code to pass these checks.
Signed-off-by: Simon Glass <[email protected]>
Reported-by: Tom Rini <[email protected]>
|
|
With a newer pylint we get a warning that gitutil.RunTests does not
exist, so remove the line.
Signed-off-by: Tom Rini <[email protected]>
|
|
With a newer pylint, we get a warning that 'br' could be used before
assignment. Fix this by declaring br first as an empty bytearray.
Reviewed-by: Neha Malcom Francis <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
With the distutils module having been removed with Python 3.12, switch
to using setuptools instead.
Signed-off-by: Tom Rini <[email protected]>
|
|
With the distutils module having been removed with Python 3.12, switch
to using setuptools instead.
Signed-off-by: Tom Rini <[email protected]>
|
|
Return value of a function 'strtok_r' is dereferenced at kwbimage.c:1655
without checking for NULL, but it is usually checked for this function.
Signed-off-by: Maks Mishin <[email protected]>
|
|
The PRNG implementing the random() function only has 2^31 states and
therefore is unsafe to use for cryptography. Use arc4random() instead.
Fixes: cc34f04efd63 ("tools: image-host.c: use random instead of rand")
Addresses-Coverity-ID: 312953 Calling risky function
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Move this file into U-Boot's Python library, so that it is no-longer
part of patman.
This makes a start on:
https://source.denx.de/u-boot/custodians/u-boot-dm/-/issues/35
Signed-off-by: Simon Glass <[email protected]>
|
|
Tom Rini <[email protected]> says:
A challenge we've run in to is making it easier for more people to use
various python tools that we include in the tree. Part of the problem is
that when we have a requirements.txt file, aside from the doc one we
share with the kernel, I created it using "pip freeze". And while this
might have been a best (or at least OK) practice at the time, that's no
longer the case and is why our files have so many things in them. What
this series does is create multiple files, one per project/tool and then
has CI install them as needed. There's a few places here where this
means that we update the requirements as well, but we keep a few big
things where they are currently. This is because updating them
introduces problems of their own and delaing with that would best be a
follow up series. I've put this through GitLab and Azure to make sure
everything is still going fine on both platforms.
Link: https://lore.kernel.org/r/[email protected]
|
|
Now that we have more requirements.txt files we need to grab all of them
for creating our cache. Also, we do longer should install
python3-pyelftools on the host as it's not used.
Signed-off-by: Tom Rini <[email protected]>
|
|
Use the "pipreqs" tool to re-create these files, with a few manual
corrections. We still need to include pytest-xdist which the tool does
not detect. We also for now don't upgrade most of the required tools as
that creates problems with various tests, which should be resolved
independently.
Signed-off-by: Tom Rini <[email protected]>
|
|
Rather than have a requirements.txt file that's shared between multiple
python projects within U-Boot, create one for each using "pipreqs".
Signed-off-by: Tom Rini <[email protected]>
|
|
Dynamic memory, referenced by 'line', is allocated by calling
function 'calloc' and lost when the function terminates with code -1.
Signed-off-by: Maks Mishin <[email protected]>
|
