From f1820eb4f44dfbfc16f06fbaff9ce3d9dde268f5 Mon Sep 17 00:00:00 2001 From: Janne Grunau Date: Thu, 4 Apr 2024 08:25:49 +0200 Subject: usb: xhci: refactor xhci_set_configuration In the next step endpoints for multiple interfaces are set up. Move most of the per endpoint initialization to separate function to avoid another identation level. Reviewed-by: Marek Vasut Reviewed-by: Neal Gompa Signed-off-by: Janne Grunau --- drivers/usb/host/xhci.c | 119 +++++++++++++++++++++++++++++------------------- 1 file changed, 73 insertions(+), 46 deletions(-) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index d13cbff9b37..534c4b973fb 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -475,67 +475,34 @@ static int xhci_configure_endpoints(struct usb_device *udev, bool ctx_change) } /** - * Configure the endpoint, programming the device contexts. + * Fill endpoint contexts for interface descriptor ifdesc. * - * @param udev pointer to the USB device structure - * Return: returns the status of the xhci_configure_endpoints + * @param udev pointer to the USB device structure + * @param ctrl pointer to the xhci pravte device structure + * @param virt_dev pointer to the xhci virtual device structure + * @param ifdesc pointer to the USB interface config descriptor + * Return: returns the status of xhci_init_ep_contexts_if */ -static int xhci_set_configuration(struct usb_device *udev) +static int xhci_init_ep_contexts_if(struct usb_device *udev, + struct xhci_ctrl *ctrl, + struct xhci_virt_device *virt_dev, + struct usb_interface *ifdesc + ) { - struct xhci_container_ctx *in_ctx; - struct xhci_container_ctx *out_ctx; - struct xhci_input_control_ctx *ctrl_ctx; - struct xhci_slot_ctx *slot_ctx; struct xhci_ep_ctx *ep_ctx[MAX_EP_CTX_NUM]; int cur_ep; - int max_ep_flag = 0; int ep_index; unsigned int dir; unsigned int ep_type; - struct xhci_ctrl *ctrl = xhci_get_ctrl(udev); - int num_of_ep; - int ep_flag = 0; u64 trb_64 = 0; - int slot_id = udev->slot_id; - struct xhci_virt_device *virt_dev = ctrl->devs[slot_id]; - struct usb_interface *ifdesc; u32 max_esit_payload; unsigned int interval; unsigned int mult; unsigned int max_burst; unsigned int avg_trb_len; unsigned int err_count = 0; + int num_of_ep = ifdesc->no_of_ep; - out_ctx = virt_dev->out_ctx; - in_ctx = virt_dev->in_ctx; - - num_of_ep = udev->config.if_desc[0].no_of_ep; - ifdesc = &udev->config.if_desc[0]; - - ctrl_ctx = xhci_get_input_control_ctx(in_ctx); - /* Initialize the input context control */ - ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG); - ctrl_ctx->drop_flags = 0; - - /* EP_FLAG gives values 1 & 4 for EP1OUT and EP2IN */ - for (cur_ep = 0; cur_ep < num_of_ep; cur_ep++) { - ep_flag = xhci_get_ep_index(&ifdesc->ep_desc[cur_ep]); - ctrl_ctx->add_flags |= cpu_to_le32(1 << (ep_flag + 1)); - if (max_ep_flag < ep_flag) - max_ep_flag = ep_flag; - } - - xhci_inval_cache((uintptr_t)out_ctx->bytes, out_ctx->size); - - /* slot context */ - xhci_slot_copy(ctrl, in_ctx, out_ctx); - slot_ctx = xhci_get_slot_ctx(ctrl, in_ctx); - slot_ctx->dev_info &= ~(cpu_to_le32(LAST_CTX_MASK)); - slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(max_ep_flag + 1) | 0); - - xhci_endpoint_copy(ctrl, in_ctx, out_ctx, 0); - - /* filling up ep contexts */ for (cur_ep = 0; cur_ep < num_of_ep; cur_ep++) { struct usb_endpoint_descriptor *endpt_desc = NULL; struct usb_ss_ep_comp_descriptor *ss_ep_comp_desc = NULL; @@ -561,7 +528,8 @@ static int xhci_set_configuration(struct usb_device *udev) avg_trb_len = max_esit_payload; ep_index = xhci_get_ep_index(endpt_desc); - ep_ctx[ep_index] = xhci_get_ep_ctx(ctrl, in_ctx, ep_index); + ep_ctx[ep_index] = xhci_get_ep_ctx(ctrl, virt_dev->in_ctx, + ep_index); /* Allocate the ep rings */ virt_dev->eps[ep_index].ring = xhci_ring_alloc(ctrl, 1, true); @@ -614,6 +582,65 @@ static int xhci_set_configuration(struct usb_device *udev) } } + return 0; +} + +/** + * Configure the endpoint, programming the device contexts. + * + * @param udev pointer to the USB device structure + * Return: returns the status of the xhci_configure_endpoints + */ +static int xhci_set_configuration(struct usb_device *udev) +{ + struct xhci_container_ctx *out_ctx; + struct xhci_container_ctx *in_ctx; + struct xhci_input_control_ctx *ctrl_ctx; + struct xhci_slot_ctx *slot_ctx; + int err; + int cur_ep; + int max_ep_flag = 0; + struct xhci_ctrl *ctrl = xhci_get_ctrl(udev); + int num_of_ep; + int ep_flag = 0; + int slot_id = udev->slot_id; + struct xhci_virt_device *virt_dev = ctrl->devs[slot_id]; + struct usb_interface *ifdesc; + + out_ctx = virt_dev->out_ctx; + in_ctx = virt_dev->in_ctx; + + num_of_ep = udev->config.if_desc[0].no_of_ep; + ifdesc = &udev->config.if_desc[0]; + + ctrl_ctx = xhci_get_input_control_ctx(in_ctx); + /* Initialize the input context control */ + ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG); + ctrl_ctx->drop_flags = 0; + + /* EP_FLAG gives values 1 & 4 for EP1OUT and EP2IN */ + for (cur_ep = 0; cur_ep < num_of_ep; cur_ep++) { + ep_flag = xhci_get_ep_index(&ifdesc->ep_desc[cur_ep]); + ctrl_ctx->add_flags |= cpu_to_le32(1 << (ep_flag + 1)); + if (max_ep_flag < ep_flag) + max_ep_flag = ep_flag; + } + + xhci_inval_cache((uintptr_t)out_ctx->bytes, out_ctx->size); + + /* slot context */ + xhci_slot_copy(ctrl, in_ctx, out_ctx); + slot_ctx = xhci_get_slot_ctx(ctrl, in_ctx); + slot_ctx->dev_info &= ~(cpu_to_le32(LAST_CTX_MASK)); + slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(max_ep_flag + 1) | 0); + + xhci_endpoint_copy(ctrl, in_ctx, out_ctx, 0); + + /* filling up ep contexts */ + err = xhci_init_ep_contexts_if(udev, ctrl, virt_dev, ifdesc); + if (err < 0) + return err; + return xhci_configure_endpoints(udev, false); } -- cgit v1.2.3 From 086e461d9e2cc0b98a187883774fa4b8be68a0ab Mon Sep 17 00:00:00 2001 From: Janne Grunau Date: Thu, 4 Apr 2024 08:25:50 +0200 Subject: usb: xhci: Set up endpoints for the first 2 interfaces The xhci driver currently only does the necessary initialization for endpoints found in the first interface descriptor. Apple USB keyboards (released 2021) use the second interface descriptor for the HID keyboard boot protocol. To allow USB drivers to use endpoints from other interface descriptors the xhci driver needs to ensure these endpoints are initialized as well. Use USB_MAX_ACTIVE_INTERFACES to control how many interface descriptors are considered during endpoint initialisation. For now define it to 2 as that is sufficient for supporting the Apple keyboards. Reviewed-by: Marek Vasut Reviewed-by: Neal Gompa Signed-off-by: Janne Grunau --- drivers/usb/host/xhci.c | 31 +++++++++++++++++++------------ include/usb.h | 6 ++++++ 2 files changed, 25 insertions(+), 12 deletions(-) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 534c4b973fb..741e186ee05 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -606,24 +606,28 @@ static int xhci_set_configuration(struct usb_device *udev) int slot_id = udev->slot_id; struct xhci_virt_device *virt_dev = ctrl->devs[slot_id]; struct usb_interface *ifdesc; + unsigned int ifnum; + unsigned int max_ifnum = min((unsigned int)USB_MAX_ACTIVE_INTERFACES, + (unsigned int)udev->config.no_of_if); out_ctx = virt_dev->out_ctx; in_ctx = virt_dev->in_ctx; - num_of_ep = udev->config.if_desc[0].no_of_ep; - ifdesc = &udev->config.if_desc[0]; - ctrl_ctx = xhci_get_input_control_ctx(in_ctx); /* Initialize the input context control */ ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG); ctrl_ctx->drop_flags = 0; - /* EP_FLAG gives values 1 & 4 for EP1OUT and EP2IN */ - for (cur_ep = 0; cur_ep < num_of_ep; cur_ep++) { - ep_flag = xhci_get_ep_index(&ifdesc->ep_desc[cur_ep]); - ctrl_ctx->add_flags |= cpu_to_le32(1 << (ep_flag + 1)); - if (max_ep_flag < ep_flag) - max_ep_flag = ep_flag; + for (ifnum = 0; ifnum < max_ifnum; ifnum++) { + ifdesc = &udev->config.if_desc[ifnum]; + num_of_ep = ifdesc->no_of_ep; + /* EP_FLAG gives values 1 & 4 for EP1OUT and EP2IN */ + for (cur_ep = 0; cur_ep < num_of_ep; cur_ep++) { + ep_flag = xhci_get_ep_index(&ifdesc->ep_desc[cur_ep]); + ctrl_ctx->add_flags |= cpu_to_le32(1 << (ep_flag + 1)); + if (max_ep_flag < ep_flag) + max_ep_flag = ep_flag; + } } xhci_inval_cache((uintptr_t)out_ctx->bytes, out_ctx->size); @@ -637,9 +641,12 @@ static int xhci_set_configuration(struct usb_device *udev) xhci_endpoint_copy(ctrl, in_ctx, out_ctx, 0); /* filling up ep contexts */ - err = xhci_init_ep_contexts_if(udev, ctrl, virt_dev, ifdesc); - if (err < 0) - return err; + for (ifnum = 0; ifnum < max_ifnum; ifnum++) { + ifdesc = &udev->config.if_desc[ifnum]; + err = xhci_init_ep_contexts_if(udev, ctrl, virt_dev, ifdesc); + if (err < 0) + return err; + } return xhci_configure_endpoints(udev, false); } diff --git a/include/usb.h b/include/usb.h index 09e3f0cb309..3aafdc8bfd1 100644 --- a/include/usb.h +++ b/include/usb.h @@ -49,6 +49,12 @@ extern bool usb_started; /* flag for the started/stopped USB status */ */ #define USB_TIMEOUT_MS(pipe) (usb_pipebulk(pipe) ? 5000 : 1000) +/* + * The xhcd hcd driver prepares only a limited number interfaces / endpoints. + * Define this limit so that drivers do not exceed it. + */ +#define USB_MAX_ACTIVE_INTERFACES 2 + /* device request (setup) */ struct devrequest { __u8 requesttype; -- cgit v1.2.3 From 0b6775c40283dd645a28b30cafa9d8cc19dc34aa Mon Sep 17 00:00:00 2001 From: Janne Grunau Date: Thu, 4 Apr 2024 08:25:51 +0200 Subject: usb: xhci: Abort transfers with unallocated rings Discovered while trying to use the second interface in the USB keyboard driver necessary on Apple USB keyboards. Reviewed-by: Marek Vasut Reviewed-by: Neal Gompa Signed-off-by: Janne Grunau --- drivers/usb/host/xhci-ring.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index b60661fe05e..910c5f3352b 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -685,6 +685,9 @@ int xhci_bulk_tx(struct usb_device *udev, unsigned long pipe, reset_ep(udev, ep_index); ring = virt_dev->eps[ep_index].ring; + if (!ring) + return -EINVAL; + /* * How much data is (potentially) left before the 64KB boundary? * XHCI Spec puts restriction( TABLE 49 and 6.4.1 section of XHCI Spec) @@ -871,6 +874,8 @@ int xhci_ctrl_tx(struct usb_device *udev, unsigned long pipe, ep_index = usb_pipe_ep_index(pipe); ep_ring = virt_dev->eps[ep_index].ring; + if (!ep_ring) + return -EINVAL; /* * Check to see if the max packet size for the default control -- cgit v1.2.3 From 18f288b8d48331d6d7391486d7fa355d3bfd2a9c Mon Sep 17 00:00:00 2001 From: Janne Grunau Date: Thu, 4 Apr 2024 08:25:52 +0200 Subject: usb: Add environment based device ignorelist Add the environment variable "usb_ignorelist" to prevent USB devices listed in it from being bound to drivers. This allows to ignore devices which are undesirable or trigger bugs in u-boot's USB stack. Devices emulating keyboards are one example of undesirable devices as u-boot currently supports only a single USB keyboard device. Most commonly, people run into this with Yubikeys, so let's ignore those in the default environment. Based on previous USB keyboard specific patches for the same purpose. Link: https://lore.kernel.org/u-boot/7ab604fb-0fec-4f5e-8708-7a3a7e2cb568@denx.de/ Reviewed-by: Neal Gompa Reviewed-by: Marek Vasut Signed-off-by: Janne Grunau --- common/usb.c | 70 +++++++++++++++++++++++++++++++++++++++++++++++ doc/usage/environment.rst | 13 +++++++++ include/env_default.h | 11 ++++++++ 3 files changed, 94 insertions(+) diff --git a/common/usb.c b/common/usb.c index 836506dcd9e..99e6b857c74 100644 --- a/common/usb.c +++ b/common/usb.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include @@ -1084,6 +1085,54 @@ static int usb_prepare_device(struct usb_device *dev, int addr, bool do_read, return 0; } +static int usb_device_is_ignored(u16 id_vendor, u16 id_product) +{ + ulong vid, pid; + char *end; + const char *cur = NULL; + + /* ignore list depends on env support */ + if (!CONFIG_IS_ENABLED(ENV_SUPPORT)) + return 0; + + cur = env_get("usb_ignorelist"); + + /* parse "usb_ignorelist" strictly */ + while (cur && cur[0] != '\0') { + vid = simple_strtoul(cur, &end, 0); + /* + * If strtoul did not parse a single digit or the next char is + * not ':' the ignore list is malformed. + */ + if (cur == end || end[0] != ':') + return -EINVAL; + + cur = end + 1; + pid = simple_strtoul(cur, &end, 0); + /* Consider '*' as wildcard for the product ID */ + if (cur == end && end[0] == '*') { + pid = U16_MAX + 1; + end++; + } + /* + * The ignore list is malformed if no product ID / wildcard was + * parsed or entries are not separated by ',' or terminated with + * '\0'. + */ + if (cur == end || (end[0] != ',' && end[0] != '\0')) + return -EINVAL; + + if (id_vendor == vid && (pid > U16_MAX || id_product == pid)) + return -ENODEV; + + if (end[0] == '\0') + break; + cur = end + 1; + } + + return 0; +} + int usb_select_config(struct usb_device *dev) { unsigned char *tmpbuf = NULL; @@ -1099,6 +1148,27 @@ int usb_select_config(struct usb_device *dev) le16_to_cpus(&dev->descriptor.idProduct); le16_to_cpus(&dev->descriptor.bcdDevice); + /* ignore devices from usb_ignorelist */ + err = usb_device_is_ignored(dev->descriptor.idVendor, + dev->descriptor.idProduct); + if (err == -ENODEV) { + debug("Ignoring USB device 0x%x:0x%x\n", + dev->descriptor.idVendor, dev->descriptor.idProduct); + return err; + } else if (err == -EINVAL) { + /* + * Continue on "usb_ignorelist" parsing errors. The list is + * parsed for each device returning the error would result in + * ignoring all USB devices. + * Since the parsing error is independent of the probed device + * report errors with printf instead of dev_err. + */ + printf("usb_ignorelist parse error in \"%s\"\n", + env_get("usb_ignorelist")); + } else if (err < 0) { + return err; + } + /* * Kingston DT Ultimate 32GB USB 3.0 seems to be extremely sensitive * about this first Get Descriptor request. If there are any other diff --git a/doc/usage/environment.rst b/doc/usage/environment.rst index ebf75fa948a..7d4b448cb30 100644 --- a/doc/usage/environment.rst +++ b/doc/usage/environment.rst @@ -366,6 +366,19 @@ tftpwindowsize This means the count of blocks we can receive before sending ack to server. +usb_ignorelist + Ignore USB devices to prevent binding them to an USB device driver. This can + be used to ignore devices are for some reason undesirable or causes crashes + u-boot's USB stack. + An example for undesired behavior is the keyboard emulation of security keys + like Yubikeys. U-boot currently supports only a single USB keyboard device + so try to probe an useful keyboard device. The default environment blocks + Yubico devices as common devices emulating keyboards. + Devices are matched by idVendor and idProduct. The variable contains a comma + separated list of idVendor:idProduct pairs as hexadecimal numbers joined + by a colon. '*' functions as a wildcard for idProduct to block all devices + with the specified idVendor. + vlan When set to a value < 4095 the traffic over Ethernet is encapsulated/received over 802.1q diff --git a/include/env_default.h b/include/env_default.h index 2ca4a087d3b..8ee500d1709 100644 --- a/include/env_default.h +++ b/include/env_default.h @@ -99,6 +99,17 @@ const char default_environment[] = { #ifdef CONFIG_SYS_SOC "soc=" CONFIG_SYS_SOC "\0" #endif +#ifdef CONFIG_USB_HOST + "usb_ignorelist=" +#ifdef CONFIG_USB_KEYBOARD + /* Ignore Yubico devices. Currently only a single USB keyboard device is + * supported and the emulated HID keyboard Yubikeys present is useless + * as keyboard. + */ + "0x1050:*," +#endif + "\0" +#endif #ifdef CONFIG_ENV_IMPORT_FDT "env_fdt_path=" CONFIG_ENV_FDT_PATH "\0" #endif -- cgit v1.2.3 From 575c68279c41b95804bfe531ea1f7407205fcc1e Mon Sep 17 00:00:00 2001 From: Janne Grunau Date: Thu, 4 Apr 2024 08:25:53 +0200 Subject: usb: kbd: support Apple Magic Keyboards (2021) Apple USB keyboards (Magic Keyboard from 2021 (product id 0x029c)) carry the HID keyboard boot protocol on the second interface descriptor. Probe via vendor and product IDs since the class/subclass/protocol match uses the first interface descriptor. Probe the two first interface descriptors for the HID keyboard boot protocol. USB configuration descriptor for reference: | Bus 003 Device 002: ID 05ac:029c Apple, Inc. Magic Keyboard | Device Descriptor: | bLength 18 | bDescriptorType 1 | bcdUSB 2.00 | bDeviceClass 0 [unknown] | bDeviceSubClass 0 [unknown] | bDeviceProtocol 0 | bMaxPacketSize0 64 | idVendor 0x05ac Apple, Inc. | idProduct 0x029c Magic Keyboard | bcdDevice 3.90 | iManufacturer 1 Apple Inc. | iProduct 2 Magic Keyboard | iSerial 3 ... | bNumConfigurations 1 | Configuration Descriptor: | bLength 9 | bDescriptorType 2 | wTotalLength 0x003b | bNumInterfaces 2 | bConfigurationValue 1 | iConfiguration 4 Keyboard | bmAttributes 0xa0 | (Bus Powered) | Remote Wakeup | MaxPower 500mA | Interface Descriptor: | bLength 9 | bDescriptorType 4 | bInterfaceNumber 0 | bAlternateSetting 0 | bNumEndpoints 1 | bInterfaceClass 3 Human Interface Device | bInterfaceSubClass 0 [unknown] | bInterfaceProtocol 0 | iInterface 5 Device Management | HID Device Descriptor: | bLength 9 | bDescriptorType 33 | bcdHID 1.10 | bCountryCode 0 Not supported | bNumDescriptors 1 | bDescriptorType 34 Report | wDescriptorLength 83 | Report Descriptors: | ** UNAVAILABLE ** | Endpoint Descriptor: | bLength 7 | bDescriptorType 5 | bEndpointAddress 0x81 EP 1 IN | bmAttributes 3 | Transfer Type Interrupt | Synch Type None | Usage Type Data | wMaxPacketSize 0x0010 1x 16 bytes | bInterval 8 | Interface Descriptor: | bLength 9 | bDescriptorType 4 | bInterfaceNumber 1 | bAlternateSetting 0 | bNumEndpoints 1 | bInterfaceClass 3 Human Interface Device | bInterfaceSubClass 1 Boot Interface Subclass | bInterfaceProtocol 1 Keyboard | iInterface 6 Keyboard / Boot | HID Device Descriptor: | bLength 9 | bDescriptorType 33 | bcdHID 1.10 | bCountryCode 13 International (ISO) | bNumDescriptors 1 | bDescriptorType 34 Report | wDescriptorLength 207 | Report Descriptors: | ** UNAVAILABLE ** | Endpoint Descriptor: | bLength 7 | bDescriptorType 5 | bEndpointAddress 0x82 EP 2 IN | bmAttributes 3 | Transfer Type Interrupt | Synch Type None | Usage Type Data | wMaxPacketSize 0x0010 1x 16 bytes | bInterval 8 Reviewed-by: Marek Vasut Reviewed-by: Neal Gompa Signed-off-by: Janne Grunau --- common/usb_kbd.c | 37 ++++++++++++++++++++++++++++++++++--- 1 file changed, 34 insertions(+), 3 deletions(-) diff --git a/common/usb_kbd.c b/common/usb_kbd.c index 4cbc9acb738..b2361bbf18e 100644 --- a/common/usb_kbd.c +++ b/common/usb_kbd.c @@ -23,6 +23,14 @@ #include +/* + * USB vendor and product IDs used for quirks. + */ +#define USB_VENDOR_ID_APPLE 0x05ac +#define USB_DEVICE_ID_APPLE_MAGIC_KEYBOARD_2021 0x029c +#define USB_DEVICE_ID_APPLE_MAGIC_KEYBOARD_FINGERPRINT_2021 0x029a +#define USB_DEVICE_ID_APPLE_MAGIC_KEYBOARD_NUMPAD_2021 0x029f + /* * If overwrite_console returns 1, the stdin, stderr and stdout * are switched to the serial port, else the settings in the @@ -106,6 +114,8 @@ struct usb_kbd_pdata { unsigned long last_report; struct int_queue *intq; + uint32_t ifnum; + uint32_t repeat_delay; uint32_t usb_in_pointer; @@ -150,8 +160,8 @@ static void usb_kbd_put_queue(struct usb_kbd_pdata *data, u8 c) */ static void usb_kbd_setled(struct usb_device *dev) { - struct usb_interface *iface = &dev->config.if_desc[0]; struct usb_kbd_pdata *data = dev->privptr; + struct usb_interface *iface = &dev->config.if_desc[data->ifnum]; ALLOC_ALIGN_BUFFER(uint32_t, leds, 1, USB_DMA_MINALIGN); *leds = data->flags & USB_KBD_LEDMASK; @@ -365,7 +375,7 @@ static inline void usb_kbd_poll_for_event(struct usb_device *dev) #if defined(CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP) struct usb_interface *iface; struct usb_kbd_pdata *data = dev->privptr; - iface = &dev->config.if_desc[0]; + iface = &dev->config.if_desc[data->ifnum]; usb_get_report(dev, iface->desc.bInterfaceNumber, 1, 0, data->new, USB_KBD_BOOT_REPORT_SIZE); if (memcmp(data->old, data->new, USB_KBD_BOOT_REPORT_SIZE)) { @@ -509,6 +519,8 @@ static int usb_kbd_probe_dev(struct usb_device *dev, unsigned int ifnum) data->new = memalign(USB_DMA_MINALIGN, roundup(USB_KBD_BOOT_REPORT_SIZE, USB_DMA_MINALIGN)); + data->ifnum = ifnum; + /* Insert private data into USB device structure */ dev->privptr = data; @@ -561,10 +573,17 @@ static int probe_usb_keyboard(struct usb_device *dev) { char *stdinname; struct stdio_dev usb_kbd_dev; + unsigned int ifnum; + unsigned int max_ifnum = min((unsigned int)USB_MAX_ACTIVE_INTERFACES, + (unsigned int)dev->config.no_of_if); int error; /* Try probing the keyboard */ - if (usb_kbd_probe_dev(dev, 0) != 1) + for (ifnum = 0; ifnum < max_ifnum; ifnum++) { + if (usb_kbd_probe_dev(dev, ifnum) == 1) + break; + } + if (ifnum >= max_ifnum) return -ENOENT; /* Register the keyboard */ @@ -731,6 +750,18 @@ static const struct usb_device_id kbd_id_table[] = { .bInterfaceSubClass = USB_SUB_HID_BOOT, .bInterfaceProtocol = USB_PROT_HID_KEYBOARD, }, + { + USB_DEVICE(USB_VENDOR_ID_APPLE, + USB_DEVICE_ID_APPLE_MAGIC_KEYBOARD_2021), + }, + { + USB_DEVICE(USB_VENDOR_ID_APPLE, + USB_DEVICE_ID_APPLE_MAGIC_KEYBOARD_FINGERPRINT_2021), + }, + { + USB_DEVICE(USB_VENDOR_ID_APPLE, + USB_DEVICE_ID_APPLE_MAGIC_KEYBOARD_NUMPAD_2021), + }, { } /* Terminating entry */ }; -- cgit v1.2.3 From 63f6a449bffe46beca89580d3efa48e5d041025c Mon Sep 17 00:00:00 2001 From: Janne Grunau Date: Thu, 4 Apr 2024 08:25:54 +0200 Subject: usb: kbd: Add probe quirk for Apple and Keychron keyboards Those keyboards do not return the current device state. Polling will timeout unless there are key presses. This is not a problem during operation but the initial device state query during probing will fail. Skip this step in usb_kbd_probe_dev() to make these devices useable. Not all Apple keyboards behave like this. A keyboard with USB vendor/product ID 05ac:0221 is reported to work with the current code. Unfortunately some Keychron keyboards "re-use" Apple's vendor ID and show the same behavior (Keychron C2, 05ac:024f for example). Reviewed-by: Marek Vasut Reviewed-by: Neal Gompa Signed-off-by: Janne Grunau --- common/usb_kbd.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/common/usb_kbd.c b/common/usb_kbd.c index b2361bbf18e..820f591fc5b 100644 --- a/common/usb_kbd.c +++ b/common/usb_kbd.c @@ -31,6 +31,10 @@ #define USB_DEVICE_ID_APPLE_MAGIC_KEYBOARD_FINGERPRINT_2021 0x029a #define USB_DEVICE_ID_APPLE_MAGIC_KEYBOARD_NUMPAD_2021 0x029f +#define USB_VENDOR_ID_KEYCHRON 0x3434 + +#define USB_HID_QUIRK_POLL_NO_REPORT_IDLE BIT(0) + /* * If overwrite_console returns 1, the stdin, stderr and stdout * are switched to the serial port, else the settings in the @@ -474,6 +478,7 @@ static int usb_kbd_probe_dev(struct usb_device *dev, unsigned int ifnum) struct usb_interface *iface; struct usb_endpoint_descriptor *ep; struct usb_kbd_pdata *data; + unsigned int quirks = 0; int epNum; if (dev->descriptor.bNumConfigurations != 1) @@ -506,6 +511,15 @@ static int usb_kbd_probe_dev(struct usb_device *dev, unsigned int ifnum) debug("USB KBD: found interrupt EP: 0x%x\n", ep->bEndpointAddress); + switch (dev->descriptor.idVendor) { + case USB_VENDOR_ID_APPLE: + case USB_VENDOR_ID_KEYCHRON: + quirks |= USB_HID_QUIRK_POLL_NO_REPORT_IDLE; + break; + default: + break; + } + data = malloc(sizeof(struct usb_kbd_pdata)); if (!data) { printf("USB KBD: Error allocating private data\n"); @@ -546,6 +560,14 @@ static int usb_kbd_probe_dev(struct usb_device *dev, unsigned int ifnum) usb_set_idle(dev, iface->desc.bInterfaceNumber, 0, 0); #endif + /* + * Apple and Keychron keyboards do not report the device state. Reports + * are only returned during key presses. + */ + if (quirks & USB_HID_QUIRK_POLL_NO_REPORT_IDLE) { + debug("USB KBD: quirk: skip testing device state\n"); + return 1; + } debug("USB KBD: enable interrupt pipe...\n"); #ifdef CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE data->intq = create_int_queue(dev, data->intpipe, 1, -- cgit v1.2.3