From e800cc67f5b6cb50a20f37c993ec1cd4063bdbd3 Mon Sep 17 00:00:00 2001 From: Vincent Jardin Date: Wed, 20 May 2026 17:00:21 +0200 Subject: mtd: spi-nor: Add gd55lb02gf chips Add the GigaDevice GD55LB02GF (256 Mo) similar to gd55lb02ge with the same read path flags. SPI_NOR_HAS_LOCK and SPI_NOR_HAS_TB do not match this chip's status register layout: the GD55LB02GF uses a 5-bit block protect field BP0..BP4 plus a CMP bit in SR2 for direction (see datasheet "Status Register Block Protection"). The generic stm-lock helpers drive only BP0..BP2 and assume SR1 bit 5 is TB, but on this part SR1 bit 5 is BP3. Enabling either flag would leave BP3..BP4 unmanaged or corrupt BP3 on every lock op. A proper support needs a vendor specific lock callback, it is out of scope for this table update. Signed-off-by: Vincent Jardin Suggested-by: Takahiro Kuwano Reviewed-by: Takahiro Kuwano --- drivers/mtd/spi/spi-nor-ids.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c index c0fa98424aa..31a2ba49a87 100644 --- a/drivers/mtd/spi/spi-nor-ids.c +++ b/drivers/mtd/spi/spi-nor-ids.c @@ -231,6 +231,10 @@ const struct flash_info spi_nor_ids[] = { SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) }, + { + INFO("gd55lb02gf", 0xc8601c, 0, 64 * 1024, 4096, + SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) + }, #endif #ifdef CONFIG_SPI_FLASH_ISSI /* ISSI */ /* ISSI */ -- cgit v1.3.1