From ec38d95f75c9f42d4e42f52bc9671346f7ce0de0 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 18 Sep 2023 16:09:18 +0200 Subject: arm64: zynqmp: Rename dt overlay file names from dts to dtso Use dtso suffix instead of dts. Build option was introduced by commit a0f9a77912b2 ("kbuild: Allow DTB overlays to built from .dtso named source files"). Signed-off-by: Michal Simek Link: https://lore.kernel.org/r/1dce37e72428c14a3ccbb5dc674b90dfe56b75ac.1695046155.git.michal.simek@amd.com --- arch/arm/dts/zynqmp-sck-kr-g-revA.dts | 397 --------------------------------- arch/arm/dts/zynqmp-sck-kr-g-revA.dtso | 397 +++++++++++++++++++++++++++++++++ arch/arm/dts/zynqmp-sck-kr-g-revB.dts | 397 --------------------------------- arch/arm/dts/zynqmp-sck-kr-g-revB.dtso | 397 +++++++++++++++++++++++++++++++++ arch/arm/dts/zynqmp-sck-kv-g-revA.dts | 351 ----------------------------- arch/arm/dts/zynqmp-sck-kv-g-revA.dtso | 351 +++++++++++++++++++++++++++++ arch/arm/dts/zynqmp-sck-kv-g-revB.dts | 339 ---------------------------- arch/arm/dts/zynqmp-sck-kv-g-revB.dtso | 339 ++++++++++++++++++++++++++++ 8 files changed, 1484 insertions(+), 1484 deletions(-) delete mode 100644 arch/arm/dts/zynqmp-sck-kr-g-revA.dts create mode 100644 arch/arm/dts/zynqmp-sck-kr-g-revA.dtso delete mode 100644 arch/arm/dts/zynqmp-sck-kr-g-revB.dts create mode 100644 arch/arm/dts/zynqmp-sck-kr-g-revB.dtso delete mode 100644 arch/arm/dts/zynqmp-sck-kv-g-revA.dts create mode 100644 arch/arm/dts/zynqmp-sck-kv-g-revA.dtso delete mode 100644 arch/arm/dts/zynqmp-sck-kv-g-revB.dts create mode 100644 arch/arm/dts/zynqmp-sck-kv-g-revB.dtso diff --git a/arch/arm/dts/zynqmp-sck-kr-g-revA.dts b/arch/arm/dts/zynqmp-sck-kr-g-revA.dts deleted file mode 100644 index 30a0230d476..00000000000 --- a/arch/arm/dts/zynqmp-sck-kr-g-revA.dts +++ /dev/null @@ -1,397 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * dts file for KR260 revA Carrier Card - * - * (C) Copyright 2021, Xilinx, Inc. - * - * Michal Simek - */ - -#include -#include -#include -#include - -/dts-v1/; -/plugin/; - -&{/} { - compatible = "xlnx,zynqmp-sk-kr260-revA", - "xlnx,zynqmp-sk-kr260", "xlnx,zynqmp"; - model = "ZynqMP KR260 revA"; - - ina260-u14 { - compatible = "iio-hwmon"; - io-channels = <&u14 0>, <&u14 1>, <&u14 2>; - }; - - si5332_0: si5332_0 { /* u17 - GEM0/1 */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - }; - - si5332_1: si5332_1 { /* u17 - DP */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <27000000>; - }; - - si5332_2: si5332_2 { /* u17 - USB */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <26000000>; - }; - - si5332_3: si5332_3 { /* u17 - SFP+ */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <156250000>; - }; - - si5332_4: si5332_4 { /* u17 - GEM2 */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - si5332_5: si5332_5 { /* u17 - GEM3 */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; -}; - -&i2c1 { /* I2C_SCK C26/C27 - MIO from SOM */ - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default", "gpio"; - pinctrl-0 = <&pinctrl_i2c1_default>; - pinctrl-1 = <&pinctrl_i2c1_gpio>; - scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - - u14: ina260@40 { /* u14 */ - compatible = "ti,ina260"; - #io-channel-cells = <1>; - label = "ina260-u14"; - reg = <0x40>; - }; - - slg7xl45106: gpio@11 { /* u19 - reset logic */ - compatible = "dlg,slg7xl45106"; - reg = <0x11>; - label = "resetchip"; - gpio-controller; - #gpio-cells = <2>; - gpio-line-names = "USB0_PHY_RESET_B", "USB1_PHY_RESET_B", - "SD_RESET_B", "USB0_HUB_RESET_B", - "USB1_HUB_RESET_B", "PS_GEM0_RESET_B", - "PS_GEM1_RESET_B", ""; - }; - - i2c-mux@74 { /* u18 */ - compatible = "nxp,pca9546"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x74>; - usbhub_i2c0: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - usbhub_i2c1: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - /* Bus 2/3 are not connected */ - }; - - /* si5332@6a - u17 - clock-generator */ -}; - -/* GEM SGMII/DP and USB 3.0 */ -&psgtr { - status = "okay"; - /* gem0/1, dp, usb */ - clocks = <&si5332_0>, <&si5332_1>, <&si5332_2>; - clock-names = "ref0", "ref1", "ref2"; -}; - -&zynqmp_dpsub { - status = "okay"; - phy-names = "dp-phy0"; - phys = <&psgtr 1 PHY_TYPE_DP 0 1>; - assigned-clock-rates = <27000000>, <25000000>, <300000000>; -}; - -&zynqmp_dpdma { - status = "okay"; - assigned-clock-rates = <600000000>; -}; - -&usb0 { /* mio52 - mio63 */ - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb0_default>; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; - reset-gpios = <&slg7xl45106 0 GPIO_ACTIVE_LOW>; - assigned-clock-rates = <250000000>, <20000000>; - - usbhub0: usb-hub { /* u43 */ - i2c-bus = <&usbhub_i2c0>; - compatible = "microchip,usb5744"; - reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>; - }; - - usb2244: usb-sd { /* u38 */ - compatible = "microchip,usb2244"; - reset-gpios = <&slg7xl45106 2 GPIO_ACTIVE_LOW>; - }; -}; - -&dwc3_0 { - status = "okay"; - dr_mode = "host"; - snps,usb3_lpm_capable; - maximum-speed = "super-speed"; -}; - -&usb1 { /* mio64 - mio75 */ - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb1_default>; - phy-names = "usb3-phy"; - phys = <&psgtr 3 PHY_TYPE_USB3 1 2>; - reset-gpios = <&slg7xl45106 1 GPIO_ACTIVE_LOW>; - assigned-clock-rates = <250000000>, <20000000>; - - usbhub1: usb-hub { /* u84 */ - i2c-bus = <&usbhub_i2c1>; - compatible = "microchip,usb5744"; - reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>; - }; -}; - -&dwc3_1 { - status = "okay"; - dr_mode = "host"; - snps,usb3_lpm_capable; - maximum-speed = "super-speed"; -}; - -&gem0 { /* mdio mio50/51 */ - status = "okay"; - phys = <&psgtr 0 PHY_TYPE_SGMII 0 0>; - phy-handle = <&phy0>; - phy-mode = "sgmii"; - is-internal-pcspma; - assigned-clock-rates = <250000000>; -}; - -&gem1 { /* mdio mio50/51, gem mio38 - mio49 */ - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gem1_default>; - phy-handle = <&phy1>; - phy-mode = "rgmii-id"; - assigned-clock-rates = <250000000>; - - mdio: mdio { - #address-cells = <1>; - #size-cells = <0>; - phy0: ethernet-phy@4 { /* u81 */ - #phy-cells = <1>; - compatible = "ethernet-phy-id2000.a231"; - reg = <4>; - ti,rx-internal-delay = ; - ti,tx-internal-delay = ; - ti,fifo-depth = ; - ti,dp83867-rxctrl-strap-quirk; - reset-assert-us = <300>; - reset-deassert-us = <280>; - reset-gpios = <&slg7xl45106 5 GPIO_ACTIVE_LOW>; - }; - phy1: ethernet-phy@8 { /* u36 */ - #phy-cells = <1>; - compatible = "ethernet-phy-id2000.a231"; - reg = <8>; - ti,rx-internal-delay = ; - ti,tx-internal-delay = ; - ti,fifo-depth = ; - ti,dp83867-rxctrl-strap-quirk; - reset-assert-us = <100>; - reset-deassert-us = <280>; - reset-gpios = <&slg7xl45106 6 GPIO_ACTIVE_LOW>; - }; - }; -}; - -/* gem2/gem3 via PL with phys u79@2 and u80@3 */ - -&pinctrl0 { - status = "okay"; - - pinctrl_uart1_default: uart1-default { - conf { - groups = "uart1_9_grp"; - slew-rate = ; - power-source = ; - drive-strength = <12>; - }; - - conf-rx { - pins = "MIO37"; - bias-high-impedance; - }; - - conf-tx { - pins = "MIO36"; - bias-disable; - output-enable; - }; - - mux { - groups = "uart1_9_grp"; - function = "uart1"; - }; - }; - - pinctrl_i2c1_default: i2c1-default { - conf { - groups = "i2c1_6_grp"; - bias-pull-up; - slew-rate = ; - power-source = ; - }; - - mux { - groups = "i2c1_6_grp"; - function = "i2c1"; - }; - }; - - pinctrl_i2c1_gpio: i2c1-gpio { - conf { - groups = "gpio0_24_grp", "gpio0_25_grp"; - slew-rate = ; - power-source = ; - }; - - mux { - groups = "gpio0_24_grp", "gpio0_25_grp"; - function = "gpio0"; - }; - }; - - pinctrl_gem1_default: gem1-default { - conf { - groups = "ethernet1_0_grp"; - slew-rate = ; - power-source = ; - }; - - conf-rx { - pins = "MIO44", "MIO46", "MIO48"; - bias-high-impedance; - low-power-disable; - }; - - conf-bootstrap { - pins = "MIO45", "MIO47", "MIO49"; - bias-disable; - output-enable; - low-power-disable; - }; - - conf-tx { - pins = "MIO38", "MIO39", "MIO40", - "MIO41", "MIO42", "MIO43"; - bias-disable; - output-enable; - low-power-enable; - }; - - conf-mdio { - groups = "mdio1_0_grp"; - slew-rate = ; - power-source = ; - bias-disable; - output-enable; - }; - - mux-mdio { - function = "mdio1"; - groups = "mdio1_0_grp"; - }; - - mux { - function = "ethernet1"; - groups = "ethernet1_0_grp"; - }; - }; - - pinctrl_usb0_default: usb0-default { - conf { - groups = "usb0_0_grp"; - power-source = ; - }; - - conf-rx { - pins = "MIO52", "MIO53", "MIO55"; - bias-high-impedance; - drive-strength = <12>; - slew-rate = ; - }; - - conf-tx { - pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", - "MIO60", "MIO61", "MIO62", "MIO63"; - bias-disable; - output-enable; - drive-strength = <4>; - slew-rate = ; - }; - - mux { - groups = "usb0_0_grp"; - function = "usb0"; - }; - }; - - pinctrl_usb1_default: usb1-default { - conf { - groups = "usb1_0_grp"; - power-source = ; - }; - - conf-rx { - pins = "MIO64", "MIO65", "MIO67"; - bias-high-impedance; - drive-strength = <12>; - slew-rate = ; - }; - - conf-tx { - pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71", - "MIO72", "MIO73", "MIO74", "MIO75"; - bias-disable; - output-enable; - drive-strength = <4>; - slew-rate = ; - }; - - mux { - groups = "usb1_0_grp"; - function = "usb1"; - }; - }; -}; - -&uart1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_default>; -}; diff --git a/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso b/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso new file mode 100644 index 00000000000..30a0230d476 --- /dev/null +++ b/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso @@ -0,0 +1,397 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for KR260 revA Carrier Card + * + * (C) Copyright 2021, Xilinx, Inc. + * + * Michal Simek + */ + +#include +#include +#include +#include + +/dts-v1/; +/plugin/; + +&{/} { + compatible = "xlnx,zynqmp-sk-kr260-revA", + "xlnx,zynqmp-sk-kr260", "xlnx,zynqmp"; + model = "ZynqMP KR260 revA"; + + ina260-u14 { + compatible = "iio-hwmon"; + io-channels = <&u14 0>, <&u14 1>, <&u14 2>; + }; + + si5332_0: si5332_0 { /* u17 - GEM0/1 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + si5332_1: si5332_1 { /* u17 - DP */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; + + si5332_2: si5332_2 { /* u17 - USB */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + si5332_3: si5332_3 { /* u17 - SFP+ */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <156250000>; + }; + + si5332_4: si5332_4 { /* u17 - GEM2 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + si5332_5: si5332_5 { /* u17 - GEM3 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; +}; + +&i2c1 { /* I2C_SCK C26/C27 - MIO from SOM */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + u14: ina260@40 { /* u14 */ + compatible = "ti,ina260"; + #io-channel-cells = <1>; + label = "ina260-u14"; + reg = <0x40>; + }; + + slg7xl45106: gpio@11 { /* u19 - reset logic */ + compatible = "dlg,slg7xl45106"; + reg = <0x11>; + label = "resetchip"; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "USB0_PHY_RESET_B", "USB1_PHY_RESET_B", + "SD_RESET_B", "USB0_HUB_RESET_B", + "USB1_HUB_RESET_B", "PS_GEM0_RESET_B", + "PS_GEM1_RESET_B", ""; + }; + + i2c-mux@74 { /* u18 */ + compatible = "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + usbhub_i2c0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + usbhub_i2c1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + /* Bus 2/3 are not connected */ + }; + + /* si5332@6a - u17 - clock-generator */ +}; + +/* GEM SGMII/DP and USB 3.0 */ +&psgtr { + status = "okay"; + /* gem0/1, dp, usb */ + clocks = <&si5332_0>, <&si5332_1>, <&si5332_2>; + clock-names = "ref0", "ref1", "ref2"; +}; + +&zynqmp_dpsub { + status = "okay"; + phy-names = "dp-phy0"; + phys = <&psgtr 1 PHY_TYPE_DP 0 1>; + assigned-clock-rates = <27000000>, <25000000>, <300000000>; +}; + +&zynqmp_dpdma { + status = "okay"; + assigned-clock-rates = <600000000>; +}; + +&usb0 { /* mio52 - mio63 */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; + reset-gpios = <&slg7xl45106 0 GPIO_ACTIVE_LOW>; + assigned-clock-rates = <250000000>, <20000000>; + + usbhub0: usb-hub { /* u43 */ + i2c-bus = <&usbhub_i2c0>; + compatible = "microchip,usb5744"; + reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>; + }; + + usb2244: usb-sd { /* u38 */ + compatible = "microchip,usb2244"; + reset-gpios = <&slg7xl45106 2 GPIO_ACTIVE_LOW>; + }; +}; + +&dwc3_0 { + status = "okay"; + dr_mode = "host"; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; +}; + +&usb1 { /* mio64 - mio75 */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 3 PHY_TYPE_USB3 1 2>; + reset-gpios = <&slg7xl45106 1 GPIO_ACTIVE_LOW>; + assigned-clock-rates = <250000000>, <20000000>; + + usbhub1: usb-hub { /* u84 */ + i2c-bus = <&usbhub_i2c1>; + compatible = "microchip,usb5744"; + reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>; + }; +}; + +&dwc3_1 { + status = "okay"; + dr_mode = "host"; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; +}; + +&gem0 { /* mdio mio50/51 */ + status = "okay"; + phys = <&psgtr 0 PHY_TYPE_SGMII 0 0>; + phy-handle = <&phy0>; + phy-mode = "sgmii"; + is-internal-pcspma; + assigned-clock-rates = <250000000>; +}; + +&gem1 { /* mdio mio50/51, gem mio38 - mio49 */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem1_default>; + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + assigned-clock-rates = <250000000>; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@4 { /* u81 */ + #phy-cells = <1>; + compatible = "ethernet-phy-id2000.a231"; + reg = <4>; + ti,rx-internal-delay = ; + ti,tx-internal-delay = ; + ti,fifo-depth = ; + ti,dp83867-rxctrl-strap-quirk; + reset-assert-us = <300>; + reset-deassert-us = <280>; + reset-gpios = <&slg7xl45106 5 GPIO_ACTIVE_LOW>; + }; + phy1: ethernet-phy@8 { /* u36 */ + #phy-cells = <1>; + compatible = "ethernet-phy-id2000.a231"; + reg = <8>; + ti,rx-internal-delay = ; + ti,tx-internal-delay = ; + ti,fifo-depth = ; + ti,dp83867-rxctrl-strap-quirk; + reset-assert-us = <100>; + reset-deassert-us = <280>; + reset-gpios = <&slg7xl45106 6 GPIO_ACTIVE_LOW>; + }; + }; +}; + +/* gem2/gem3 via PL with phys u79@2 and u80@3 */ + +&pinctrl0 { + status = "okay"; + + pinctrl_uart1_default: uart1-default { + conf { + groups = "uart1_9_grp"; + slew-rate = ; + power-source = ; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO37"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO36"; + bias-disable; + output-enable; + }; + + mux { + groups = "uart1_9_grp"; + function = "uart1"; + }; + }; + + pinctrl_i2c1_default: i2c1-default { + conf { + groups = "i2c1_6_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + + mux { + groups = "i2c1_6_grp"; + function = "i2c1"; + }; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + conf { + groups = "gpio0_24_grp", "gpio0_25_grp"; + slew-rate = ; + power-source = ; + }; + + mux { + groups = "gpio0_24_grp", "gpio0_25_grp"; + function = "gpio0"; + }; + }; + + pinctrl_gem1_default: gem1-default { + conf { + groups = "ethernet1_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO44", "MIO46", "MIO48"; + bias-high-impedance; + low-power-disable; + }; + + conf-bootstrap { + pins = "MIO45", "MIO47", "MIO49"; + bias-disable; + output-enable; + low-power-disable; + }; + + conf-tx { + pins = "MIO38", "MIO39", "MIO40", + "MIO41", "MIO42", "MIO43"; + bias-disable; + output-enable; + low-power-enable; + }; + + conf-mdio { + groups = "mdio1_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + output-enable; + }; + + mux-mdio { + function = "mdio1"; + groups = "mdio1_0_grp"; + }; + + mux { + function = "ethernet1"; + groups = "ethernet1_0_grp"; + }; + }; + + pinctrl_usb0_default: usb0-default { + conf { + groups = "usb0_0_grp"; + power-source = ; + }; + + conf-rx { + pins = "MIO52", "MIO53", "MIO55"; + bias-high-impedance; + drive-strength = <12>; + slew-rate = ; + }; + + conf-tx { + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", + "MIO60", "MIO61", "MIO62", "MIO63"; + bias-disable; + output-enable; + drive-strength = <4>; + slew-rate = ; + }; + + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + }; + + pinctrl_usb1_default: usb1-default { + conf { + groups = "usb1_0_grp"; + power-source = ; + }; + + conf-rx { + pins = "MIO64", "MIO65", "MIO67"; + bias-high-impedance; + drive-strength = <12>; + slew-rate = ; + }; + + conf-tx { + pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71", + "MIO72", "MIO73", "MIO74", "MIO75"; + bias-disable; + output-enable; + drive-strength = <4>; + slew-rate = ; + }; + + mux { + groups = "usb1_0_grp"; + function = "usb1"; + }; + }; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; +}; diff --git a/arch/arm/dts/zynqmp-sck-kr-g-revB.dts b/arch/arm/dts/zynqmp-sck-kr-g-revB.dts deleted file mode 100644 index 8f4c52d6d64..00000000000 --- a/arch/arm/dts/zynqmp-sck-kr-g-revB.dts +++ /dev/null @@ -1,397 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * dts file for KR260 revB Carrier Card (A03 revision) - * - * (C) Copyright 2021 - 2022, Xilinx, Inc. - * - * Michal Simek - */ - -#include -#include -#include -#include - -/dts-v1/; -/plugin/; - -&{/} { - compatible = "xlnx,zynqmp-sk-kr260-revB", - "xlnx,zynqmp-sk-kr260", "xlnx,zynqmp"; - model = "ZynqMP KR260 revB"; - - ina260-u14 { - compatible = "iio-hwmon"; - io-channels = <&u14 0>, <&u14 1>, <&u14 2>; - }; - - clk_125: clock0 { /* u87 - GEM0/1 */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - }; - - clk_27: clock1 { /* u86 - DP */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <27000000>; - }; - - clk_26: clock2 { /* u89 - USB */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <26000000>; - }; - - clk_156: clock3 { /* u90 - SFP+ */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <156250000>; - }; - - clk_25_0: clock4 { /* u92/u91 - GEM2 */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - clk_25_1: clock5 { /* u92/u91 - GEM3 */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; -}; - -&i2c1 { /* I2C_SCK C26/C27 - MIO from SOM */ - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default", "gpio"; - pinctrl-0 = <&pinctrl_i2c1_default>; - pinctrl-1 = <&pinctrl_i2c1_gpio>; - scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - - u14: ina260@40 { /* u14 */ - compatible = "ti,ina260"; - #io-channel-cells = <1>; - label = "ina260-u14"; - reg = <0x40>; - }; - - slg7xl45106: gpio@11 { /* u19 - reset logic */ - compatible = "dlg,slg7xl45106"; - reg = <0x11>; - label = "resetchip"; - gpio-controller; - #gpio-cells = <2>; - gpio-line-names = "USB0_PHY_RESET_B", "USB1_PHY_RESET_B", - "SD_RESET_B", "USB0_HUB_RESET_B", - "USB1_HUB_RESET_B", "PS_GEM0_RESET_B", - "PS_GEM1_RESET_B", ""; - }; - - i2c-mux@74 { /* u18 */ - compatible = "nxp,pca9546"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x74>; - usbhub_i2c0: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - usbhub_i2c1: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - /* Bus 2/3 are not connected */ - }; - - /* si5332@6a - u17 - clock-generator */ -}; - -/* GEM SGMII/DP and USB 3.0 */ -&psgtr { - status = "okay"; - /* gem0/1, dp, usb */ - clocks = <&clk_125>, <&clk_27>, <&clk_26>; - clock-names = "ref0", "ref1", "ref2"; -}; - -&zynqmp_dpsub { - status = "okay"; - phy-names = "dp-phy0"; - phys = <&psgtr 1 PHY_TYPE_DP 0 1>; - assigned-clock-rates = <27000000>, <25000000>, <300000000>; -}; - -&zynqmp_dpdma { - status = "okay"; - assigned-clock-rates = <600000000>; -}; - -&usb0 { /* mio52 - mio63 */ - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb0_default>; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; - reset-gpios = <&slg7xl45106 0 GPIO_ACTIVE_LOW>; - assigned-clock-rates = <250000000>, <20000000>; - - usbhub0: usb-hub { /* u43 */ - i2c-bus = <&usbhub_i2c0>; - compatible = "microchip,usb5744"; - reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>; - }; - - usb2244: usb-sd { /* u38 */ - compatible = "microchip,usb2244"; - reset-gpios = <&slg7xl45106 2 GPIO_ACTIVE_LOW>; - }; -}; - -&dwc3_0 { - status = "okay"; - dr_mode = "host"; - snps,usb3_lpm_capable; - maximum-speed = "super-speed"; -}; - -&usb1 { /* mio64 - mio75 */ - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb1_default>; - phy-names = "usb3-phy"; - phys = <&psgtr 3 PHY_TYPE_USB3 1 2>; - reset-gpios = <&slg7xl45106 1 GPIO_ACTIVE_LOW>; - assigned-clock-rates = <250000000>, <20000000>; - - usbhub1: usb-hub { /* u84 */ - i2c-bus = <&usbhub_i2c1>; - compatible = "microchip,usb5744"; - reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>; - }; -}; - -&dwc3_1 { - status = "okay"; - dr_mode = "host"; - snps,usb3_lpm_capable; - maximum-speed = "super-speed"; -}; - -&gem0 { /* mdio mio50/51 */ - status = "okay"; - phys = <&psgtr 0 PHY_TYPE_SGMII 0 0>; - phy-handle = <&phy0>; - phy-mode = "sgmii"; - is-internal-pcspma; - assigned-clock-rates = <250000000>; -}; - -&gem1 { /* mdio mio50/51, gem mio38 - mio49 */ - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gem1_default>; - phy-handle = <&phy1>; - phy-mode = "rgmii-id"; - assigned-clock-rates = <250000000>; - - mdio: mdio { - #address-cells = <1>; - #size-cells = <0>; - phy0: ethernet-phy@4 { /* u81 */ - #phy-cells = <1>; - compatible = "ethernet-phy-id2000.a231"; - reg = <4>; - ti,rx-internal-delay = ; - ti,tx-internal-delay = ; - ti,fifo-depth = ; - ti,dp83867-rxctrl-strap-quirk; - reset-assert-us = <300>; - reset-deassert-us = <280>; - reset-gpios = <&slg7xl45106 5 GPIO_ACTIVE_LOW>; - }; - phy1: ethernet-phy@8 { /* u36 */ - #phy-cells = <1>; - compatible = "ethernet-phy-id2000.a231"; - reg = <8>; - ti,rx-internal-delay = ; - ti,tx-internal-delay = ; - ti,fifo-depth = ; - ti,dp83867-rxctrl-strap-quirk; - reset-assert-us = <100>; - reset-deassert-us = <280>; - reset-gpios = <&slg7xl45106 6 GPIO_ACTIVE_LOW>; - }; - }; -}; - -/* gem2/gem3 via PL with phys u79@2 and u80@3 */ - -&pinctrl0 { - status = "okay"; - - pinctrl_uart1_default: uart1-default { - conf { - groups = "uart1_9_grp"; - slew-rate = ; - power-source = ; - drive-strength = <12>; - }; - - conf-rx { - pins = "MIO37"; - bias-high-impedance; - }; - - conf-tx { - pins = "MIO36"; - bias-disable; - output-enable; - }; - - mux { - groups = "uart1_9_grp"; - function = "uart1"; - }; - }; - - pinctrl_i2c1_default: i2c1-default { - conf { - groups = "i2c1_6_grp"; - bias-pull-up; - slew-rate = ; - power-source = ; - }; - - mux { - groups = "i2c1_6_grp"; - function = "i2c1"; - }; - }; - - pinctrl_i2c1_gpio: i2c1-gpio { - conf { - groups = "gpio0_24_grp", "gpio0_25_grp"; - slew-rate = ; - power-source = ; - }; - - mux { - groups = "gpio0_24_grp", "gpio0_25_grp"; - function = "gpio0"; - }; - }; - - pinctrl_gem1_default: gem1-default { - conf { - groups = "ethernet1_0_grp"; - slew-rate = ; - power-source = ; - }; - - conf-rx { - pins = "MIO44", "MIO46", "MIO48"; - bias-high-impedance; - low-power-disable; - }; - - conf-bootstrap { - pins = "MIO45", "MIO47", "MIO49"; - bias-disable; - output-enable; - low-power-disable; - }; - - conf-tx { - pins = "MIO38", "MIO39", "MIO40", - "MIO41", "MIO42", "MIO43"; - bias-disable; - output-enable; - low-power-enable; - }; - - conf-mdio { - groups = "mdio1_0_grp"; - slew-rate = ; - power-source = ; - bias-disable; - output-enable; - }; - - mux-mdio { - function = "mdio1"; - groups = "mdio1_0_grp"; - }; - - mux { - function = "ethernet1"; - groups = "ethernet1_0_grp"; - }; - }; - - pinctrl_usb0_default: usb0-default { - conf { - groups = "usb0_0_grp"; - power-source = ; - }; - - conf-rx { - pins = "MIO52", "MIO53", "MIO55"; - bias-high-impedance; - drive-strength = <12>; - slew-rate = ; - }; - - conf-tx { - pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", - "MIO60", "MIO61", "MIO62", "MIO63"; - bias-disable; - output-enable; - drive-strength = <4>; - slew-rate = ; - }; - - mux { - groups = "usb0_0_grp"; - function = "usb0"; - }; - }; - - pinctrl_usb1_default: usb1-default { - conf { - groups = "usb1_0_grp"; - power-source = ; - }; - - conf-rx { - pins = "MIO64", "MIO65", "MIO67"; - bias-high-impedance; - drive-strength = <12>; - slew-rate = ; - }; - - conf-tx { - pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71", - "MIO72", "MIO73", "MIO74", "MIO75"; - bias-disable; - output-enable; - drive-strength = <4>; - slew-rate = ; - }; - - mux { - groups = "usb1_0_grp"; - function = "usb1"; - }; - }; -}; - -&uart1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_default>; -}; diff --git a/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso b/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso new file mode 100644 index 00000000000..8f4c52d6d64 --- /dev/null +++ b/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso @@ -0,0 +1,397 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for KR260 revB Carrier Card (A03 revision) + * + * (C) Copyright 2021 - 2022, Xilinx, Inc. + * + * Michal Simek + */ + +#include +#include +#include +#include + +/dts-v1/; +/plugin/; + +&{/} { + compatible = "xlnx,zynqmp-sk-kr260-revB", + "xlnx,zynqmp-sk-kr260", "xlnx,zynqmp"; + model = "ZynqMP KR260 revB"; + + ina260-u14 { + compatible = "iio-hwmon"; + io-channels = <&u14 0>, <&u14 1>, <&u14 2>; + }; + + clk_125: clock0 { /* u87 - GEM0/1 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + clk_27: clock1 { /* u86 - DP */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; + + clk_26: clock2 { /* u89 - USB */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + clk_156: clock3 { /* u90 - SFP+ */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <156250000>; + }; + + clk_25_0: clock4 { /* u92/u91 - GEM2 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + clk_25_1: clock5 { /* u92/u91 - GEM3 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; +}; + +&i2c1 { /* I2C_SCK C26/C27 - MIO from SOM */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + u14: ina260@40 { /* u14 */ + compatible = "ti,ina260"; + #io-channel-cells = <1>; + label = "ina260-u14"; + reg = <0x40>; + }; + + slg7xl45106: gpio@11 { /* u19 - reset logic */ + compatible = "dlg,slg7xl45106"; + reg = <0x11>; + label = "resetchip"; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "USB0_PHY_RESET_B", "USB1_PHY_RESET_B", + "SD_RESET_B", "USB0_HUB_RESET_B", + "USB1_HUB_RESET_B", "PS_GEM0_RESET_B", + "PS_GEM1_RESET_B", ""; + }; + + i2c-mux@74 { /* u18 */ + compatible = "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + usbhub_i2c0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + usbhub_i2c1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + /* Bus 2/3 are not connected */ + }; + + /* si5332@6a - u17 - clock-generator */ +}; + +/* GEM SGMII/DP and USB 3.0 */ +&psgtr { + status = "okay"; + /* gem0/1, dp, usb */ + clocks = <&clk_125>, <&clk_27>, <&clk_26>; + clock-names = "ref0", "ref1", "ref2"; +}; + +&zynqmp_dpsub { + status = "okay"; + phy-names = "dp-phy0"; + phys = <&psgtr 1 PHY_TYPE_DP 0 1>; + assigned-clock-rates = <27000000>, <25000000>, <300000000>; +}; + +&zynqmp_dpdma { + status = "okay"; + assigned-clock-rates = <600000000>; +}; + +&usb0 { /* mio52 - mio63 */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; + reset-gpios = <&slg7xl45106 0 GPIO_ACTIVE_LOW>; + assigned-clock-rates = <250000000>, <20000000>; + + usbhub0: usb-hub { /* u43 */ + i2c-bus = <&usbhub_i2c0>; + compatible = "microchip,usb5744"; + reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>; + }; + + usb2244: usb-sd { /* u38 */ + compatible = "microchip,usb2244"; + reset-gpios = <&slg7xl45106 2 GPIO_ACTIVE_LOW>; + }; +}; + +&dwc3_0 { + status = "okay"; + dr_mode = "host"; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; +}; + +&usb1 { /* mio64 - mio75 */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 3 PHY_TYPE_USB3 1 2>; + reset-gpios = <&slg7xl45106 1 GPIO_ACTIVE_LOW>; + assigned-clock-rates = <250000000>, <20000000>; + + usbhub1: usb-hub { /* u84 */ + i2c-bus = <&usbhub_i2c1>; + compatible = "microchip,usb5744"; + reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>; + }; +}; + +&dwc3_1 { + status = "okay"; + dr_mode = "host"; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; +}; + +&gem0 { /* mdio mio50/51 */ + status = "okay"; + phys = <&psgtr 0 PHY_TYPE_SGMII 0 0>; + phy-handle = <&phy0>; + phy-mode = "sgmii"; + is-internal-pcspma; + assigned-clock-rates = <250000000>; +}; + +&gem1 { /* mdio mio50/51, gem mio38 - mio49 */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem1_default>; + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + assigned-clock-rates = <250000000>; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@4 { /* u81 */ + #phy-cells = <1>; + compatible = "ethernet-phy-id2000.a231"; + reg = <4>; + ti,rx-internal-delay = ; + ti,tx-internal-delay = ; + ti,fifo-depth = ; + ti,dp83867-rxctrl-strap-quirk; + reset-assert-us = <300>; + reset-deassert-us = <280>; + reset-gpios = <&slg7xl45106 5 GPIO_ACTIVE_LOW>; + }; + phy1: ethernet-phy@8 { /* u36 */ + #phy-cells = <1>; + compatible = "ethernet-phy-id2000.a231"; + reg = <8>; + ti,rx-internal-delay = ; + ti,tx-internal-delay = ; + ti,fifo-depth = ; + ti,dp83867-rxctrl-strap-quirk; + reset-assert-us = <100>; + reset-deassert-us = <280>; + reset-gpios = <&slg7xl45106 6 GPIO_ACTIVE_LOW>; + }; + }; +}; + +/* gem2/gem3 via PL with phys u79@2 and u80@3 */ + +&pinctrl0 { + status = "okay"; + + pinctrl_uart1_default: uart1-default { + conf { + groups = "uart1_9_grp"; + slew-rate = ; + power-source = ; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO37"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO36"; + bias-disable; + output-enable; + }; + + mux { + groups = "uart1_9_grp"; + function = "uart1"; + }; + }; + + pinctrl_i2c1_default: i2c1-default { + conf { + groups = "i2c1_6_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + + mux { + groups = "i2c1_6_grp"; + function = "i2c1"; + }; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + conf { + groups = "gpio0_24_grp", "gpio0_25_grp"; + slew-rate = ; + power-source = ; + }; + + mux { + groups = "gpio0_24_grp", "gpio0_25_grp"; + function = "gpio0"; + }; + }; + + pinctrl_gem1_default: gem1-default { + conf { + groups = "ethernet1_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO44", "MIO46", "MIO48"; + bias-high-impedance; + low-power-disable; + }; + + conf-bootstrap { + pins = "MIO45", "MIO47", "MIO49"; + bias-disable; + output-enable; + low-power-disable; + }; + + conf-tx { + pins = "MIO38", "MIO39", "MIO40", + "MIO41", "MIO42", "MIO43"; + bias-disable; + output-enable; + low-power-enable; + }; + + conf-mdio { + groups = "mdio1_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + output-enable; + }; + + mux-mdio { + function = "mdio1"; + groups = "mdio1_0_grp"; + }; + + mux { + function = "ethernet1"; + groups = "ethernet1_0_grp"; + }; + }; + + pinctrl_usb0_default: usb0-default { + conf { + groups = "usb0_0_grp"; + power-source = ; + }; + + conf-rx { + pins = "MIO52", "MIO53", "MIO55"; + bias-high-impedance; + drive-strength = <12>; + slew-rate = ; + }; + + conf-tx { + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", + "MIO60", "MIO61", "MIO62", "MIO63"; + bias-disable; + output-enable; + drive-strength = <4>; + slew-rate = ; + }; + + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + }; + + pinctrl_usb1_default: usb1-default { + conf { + groups = "usb1_0_grp"; + power-source = ; + }; + + conf-rx { + pins = "MIO64", "MIO65", "MIO67"; + bias-high-impedance; + drive-strength = <12>; + slew-rate = ; + }; + + conf-tx { + pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71", + "MIO72", "MIO73", "MIO74", "MIO75"; + bias-disable; + output-enable; + drive-strength = <4>; + slew-rate = ; + }; + + mux { + groups = "usb1_0_grp"; + function = "usb1"; + }; + }; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; +}; diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revA.dts b/arch/arm/dts/zynqmp-sck-kv-g-revA.dts deleted file mode 100644 index 55bef1df75d..00000000000 --- a/arch/arm/dts/zynqmp-sck-kv-g-revA.dts +++ /dev/null @@ -1,351 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * dts file for KV260 revA Carrier Card - * - * (C) Copyright 2020 - 2021, Xilinx, Inc. - * - * SD level shifter: - * "A" – A01 board un-modified (NXP) - * "Y" – A01 board modified with legacy interposer (Nexperia) - * "Z" – A01 board modified with Diode interposer - * - * Michal Simek - */ - -#include -#include -#include -#include - -/dts-v1/; -/plugin/; - -&{/} { - compatible = "xlnx,zynqmp-sk-kv260-revA", - "xlnx,zynqmp-sk-kv260-revY", - "xlnx,zynqmp-sk-kv260-revZ", - "xlnx,zynqmp-sk-kv260", "xlnx,zynqmp"; - model = "ZynqMP KV260 revA"; -}; - -&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */ - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default", "gpio"; - pinctrl-0 = <&pinctrl_i2c1_default>; - pinctrl-1 = <&pinctrl_i2c1_gpio>; - scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - - u14: ina260@40 { /* u14 */ - compatible = "ti,ina260"; - #io-channel-cells = <1>; - label = "ina260-u14"; - reg = <0x40>; - }; - /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */ -}; - -&amba { - ina260-u14 { - compatible = "iio-hwmon"; - io-channels = <&u14 0>, <&u14 1>, <&u14 2>; - }; - - si5332_0: si5332_0 { /* u17 */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - }; - - si5332_1: si5332_1 { /* u17 */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - si5332_2: si5332_2 { /* u17 */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <48000000>; - }; - - si5332_3: si5332_3 { /* u17 */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - }; - - si5332_4: si5332_4 { /* u17 */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <26000000>; - }; - - si5332_5: si5332_5 { /* u17 */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <27000000>; - }; -}; - -/* DP/USB 3.0 and SATA */ -&psgtr { - status = "okay"; - /* pcie, usb3, sata */ - clocks = <&si5332_5>, <&si5332_4>, <&si5332_0>; - clock-names = "ref0", "ref1", "ref2"; -}; - -&sata { - status = "okay"; - /* SATA OOB timing settings */ - ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; - ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; - ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; - ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; - ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; - ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; - ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; - ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; - phy-names = "sata-phy"; - phys = <&psgtr 3 PHY_TYPE_SATA 1 2>; -}; - -&zynqmp_dpsub { - status = "okay"; - phy-names = "dp-phy0", "dp-phy1"; - phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>; - assigned-clock-rates = <27000000>, <25000000>, <300000000>; -}; - -&zynqmp_dpdma { - status = "okay"; - assigned-clock-rates = <600000000>; -}; - -&usb0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb0_default>; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 1>; - usbhub: usb5744 { /* u43 */ - compatible = "microchip,usb5744"; - reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>; - }; -}; - -&dwc3_0 { - status = "okay"; - dr_mode = "host"; - snps,usb3_lpm_capable; - maximum-speed = "super-speed"; -}; - -&sdhci1 { /* on CC with tuned parameters */ - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sdhci1_default>; - /* - * SD 3.0 requires level shifter and this property - * should be removed if the board has level shifter and - * need to work in UHS mode - */ - no-1-8-v; - disable-wp; - xlnx,mio-bank = <1>; - assigned-clock-rates = <187498123>; - bus-width = <8>; -}; - -&gem3 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gem3_default>; - phy-handle = <&phy0>; - phy-mode = "rgmii-id"; - assigned-clock-rates = <250000000>; - - mdio: mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy0: ethernet-phy@1 { - #phy-cells = <1>; - reg = <1>; - compatible = "ethernet-phy-id2000.a231"; - ti,rx-internal-delay = ; - ti,tx-internal-delay = ; - ti,fifo-depth = ; - ti,dp83867-rxctrl-strap-quirk; - reset-assert-us = <100>; - reset-deassert-us = <280>; - reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&pinctrl0 { - status = "okay"; - - pinctrl_uart1_default: uart1-default { - conf { - groups = "uart1_9_grp"; - slew-rate = ; - power-source = ; - drive-strength = <12>; - }; - - conf-rx { - pins = "MIO37"; - bias-high-impedance; - }; - - conf-tx { - pins = "MIO36"; - bias-disable; - output-enable; - }; - - mux { - groups = "uart1_9_grp"; - function = "uart1"; - }; - }; - - pinctrl_i2c1_default: i2c1-default { - conf { - groups = "i2c1_6_grp"; - bias-pull-up; - slew-rate = ; - power-source = ; - }; - - mux { - groups = "i2c1_6_grp"; - function = "i2c1"; - }; - }; - - pinctrl_i2c1_gpio: i2c1-gpio { - conf { - groups = "gpio0_24_grp", "gpio0_25_grp"; - slew-rate = ; - power-source = ; - }; - - mux { - groups = "gpio0_24_grp", "gpio0_25_grp"; - function = "gpio0"; - }; - }; - - pinctrl_gem3_default: gem3-default { - conf { - groups = "ethernet3_0_grp"; - slew-rate = ; - power-source = ; - }; - - conf-rx { - pins = "MIO70", "MIO72", "MIO74"; - bias-high-impedance; - low-power-disable; - }; - - conf-bootstrap { - pins = "MIO71", "MIO73", "MIO75"; - bias-disable; - output-enable; - low-power-disable; - }; - - conf-tx { - pins = "MIO64", "MIO65", "MIO66", - "MIO67", "MIO68", "MIO69"; - bias-disable; - output-enable; - low-power-enable; - }; - - conf-mdio { - groups = "mdio3_0_grp"; - slew-rate = ; - power-source = ; - bias-disable; - output-enable; - }; - - mux-mdio { - function = "mdio3"; - groups = "mdio3_0_grp"; - }; - - mux { - function = "ethernet3"; - groups = "ethernet3_0_grp"; - }; - }; - - pinctrl_usb0_default: usb0-default { - conf { - groups = "usb0_0_grp"; - power-source = ; - }; - - conf-rx { - pins = "MIO52", "MIO53", "MIO55"; - bias-high-impedance; - drive-strength = <12>; - slew-rate = ; - }; - - conf-tx { - pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", - "MIO60", "MIO61", "MIO62", "MIO63"; - bias-disable; - output-enable; - drive-strength = <4>; - slew-rate = ; - }; - - mux { - groups = "usb0_0_grp"; - function = "usb0"; - }; - }; - - pinctrl_sdhci1_default: sdhci1-default { - conf { - groups = "sdio1_0_grp"; - slew-rate = ; - power-source = ; - bias-disable; - }; - - conf-cd { - groups = "sdio1_cd_0_grp"; - bias-high-impedance; - bias-pull-up; - slew-rate = ; - power-source = ; - }; - - mux-cd { - groups = "sdio1_cd_0_grp"; - function = "sdio1_cd"; - }; - - mux { - groups = "sdio1_0_grp"; - function = "sdio1"; - }; - }; -}; - -&uart1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_default>; -}; diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revA.dtso b/arch/arm/dts/zynqmp-sck-kv-g-revA.dtso new file mode 100644 index 00000000000..55bef1df75d --- /dev/null +++ b/arch/arm/dts/zynqmp-sck-kv-g-revA.dtso @@ -0,0 +1,351 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for KV260 revA Carrier Card + * + * (C) Copyright 2020 - 2021, Xilinx, Inc. + * + * SD level shifter: + * "A" – A01 board un-modified (NXP) + * "Y" – A01 board modified with legacy interposer (Nexperia) + * "Z" – A01 board modified with Diode interposer + * + * Michal Simek + */ + +#include +#include +#include +#include + +/dts-v1/; +/plugin/; + +&{/} { + compatible = "xlnx,zynqmp-sk-kv260-revA", + "xlnx,zynqmp-sk-kv260-revY", + "xlnx,zynqmp-sk-kv260-revZ", + "xlnx,zynqmp-sk-kv260", "xlnx,zynqmp"; + model = "ZynqMP KV260 revA"; +}; + +&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + u14: ina260@40 { /* u14 */ + compatible = "ti,ina260"; + #io-channel-cells = <1>; + label = "ina260-u14"; + reg = <0x40>; + }; + /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */ +}; + +&amba { + ina260-u14 { + compatible = "iio-hwmon"; + io-channels = <&u14 0>, <&u14 1>, <&u14 2>; + }; + + si5332_0: si5332_0 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + si5332_1: si5332_1 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + si5332_2: si5332_2 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; + + si5332_3: si5332_3 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + si5332_4: si5332_4 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + si5332_5: si5332_5 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; +}; + +/* DP/USB 3.0 and SATA */ +&psgtr { + status = "okay"; + /* pcie, usb3, sata */ + clocks = <&si5332_5>, <&si5332_4>, <&si5332_0>; + clock-names = "ref0", "ref1", "ref2"; +}; + +&sata { + status = "okay"; + /* SATA OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + phy-names = "sata-phy"; + phys = <&psgtr 3 PHY_TYPE_SATA 1 2>; +}; + +&zynqmp_dpsub { + status = "okay"; + phy-names = "dp-phy0", "dp-phy1"; + phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>; + assigned-clock-rates = <27000000>, <25000000>, <300000000>; +}; + +&zynqmp_dpdma { + status = "okay"; + assigned-clock-rates = <600000000>; +}; + +&usb0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 1>; + usbhub: usb5744 { /* u43 */ + compatible = "microchip,usb5744"; + reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>; + }; +}; + +&dwc3_0 { + status = "okay"; + dr_mode = "host"; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; +}; + +&sdhci1 { /* on CC with tuned parameters */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci1_default>; + /* + * SD 3.0 requires level shifter and this property + * should be removed if the board has level shifter and + * need to work in UHS mode + */ + no-1-8-v; + disable-wp; + xlnx,mio-bank = <1>; + assigned-clock-rates = <187498123>; + bus-width = <8>; +}; + +&gem3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem3_default>; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + assigned-clock-rates = <250000000>; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@1 { + #phy-cells = <1>; + reg = <1>; + compatible = "ethernet-phy-id2000.a231"; + ti,rx-internal-delay = ; + ti,tx-internal-delay = ; + ti,fifo-depth = ; + ti,dp83867-rxctrl-strap-quirk; + reset-assert-us = <100>; + reset-deassert-us = <280>; + reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pinctrl0 { + status = "okay"; + + pinctrl_uart1_default: uart1-default { + conf { + groups = "uart1_9_grp"; + slew-rate = ; + power-source = ; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO37"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO36"; + bias-disable; + output-enable; + }; + + mux { + groups = "uart1_9_grp"; + function = "uart1"; + }; + }; + + pinctrl_i2c1_default: i2c1-default { + conf { + groups = "i2c1_6_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + + mux { + groups = "i2c1_6_grp"; + function = "i2c1"; + }; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + conf { + groups = "gpio0_24_grp", "gpio0_25_grp"; + slew-rate = ; + power-source = ; + }; + + mux { + groups = "gpio0_24_grp", "gpio0_25_grp"; + function = "gpio0"; + }; + }; + + pinctrl_gem3_default: gem3-default { + conf { + groups = "ethernet3_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO70", "MIO72", "MIO74"; + bias-high-impedance; + low-power-disable; + }; + + conf-bootstrap { + pins = "MIO71", "MIO73", "MIO75"; + bias-disable; + output-enable; + low-power-disable; + }; + + conf-tx { + pins = "MIO64", "MIO65", "MIO66", + "MIO67", "MIO68", "MIO69"; + bias-disable; + output-enable; + low-power-enable; + }; + + conf-mdio { + groups = "mdio3_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + output-enable; + }; + + mux-mdio { + function = "mdio3"; + groups = "mdio3_0_grp"; + }; + + mux { + function = "ethernet3"; + groups = "ethernet3_0_grp"; + }; + }; + + pinctrl_usb0_default: usb0-default { + conf { + groups = "usb0_0_grp"; + power-source = ; + }; + + conf-rx { + pins = "MIO52", "MIO53", "MIO55"; + bias-high-impedance; + drive-strength = <12>; + slew-rate = ; + }; + + conf-tx { + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", + "MIO60", "MIO61", "MIO62", "MIO63"; + bias-disable; + output-enable; + drive-strength = <4>; + slew-rate = ; + }; + + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + }; + + pinctrl_sdhci1_default: sdhci1-default { + conf { + groups = "sdio1_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + + conf-cd { + groups = "sdio1_cd_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + + mux-cd { + groups = "sdio1_cd_0_grp"; + function = "sdio1_cd"; + }; + + mux { + groups = "sdio1_0_grp"; + function = "sdio1"; + }; + }; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; +}; diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revB.dts b/arch/arm/dts/zynqmp-sck-kv-g-revB.dts deleted file mode 100644 index 1b1d9e772f5..00000000000 --- a/arch/arm/dts/zynqmp-sck-kv-g-revB.dts +++ /dev/null @@ -1,339 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * dts file for KV260 revA Carrier Card - * - * (C) Copyright 2020 - 2021, Xilinx, Inc. - * - * Michal Simek - */ - -#include -#include -#include -#include - -/dts-v1/; -/plugin/; - -&{/} { - compatible = "xlnx,zynqmp-sk-kv260-rev2", - "xlnx,zynqmp-sk-kv260-rev1", - "xlnx,zynqmp-sk-kv260-revB", - "xlnx,zynqmp-sk-kv260", "xlnx,zynqmp"; - model = "ZynqMP KV260 revB"; -}; - -&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */ - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default", "gpio"; - pinctrl-0 = <&pinctrl_i2c1_default>; - pinctrl-1 = <&pinctrl_i2c1_gpio>; - scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - - u14: ina260@40 { /* u14 */ - compatible = "ti,ina260"; - #io-channel-cells = <1>; - label = "ina260-u14"; - reg = <0x40>; - }; - /* u43 - 0x2d - USB hub */ - /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */ -}; - -&amba { - ina260-u14 { - compatible = "iio-hwmon"; - io-channels = <&u14 0>, <&u14 1>, <&u14 2>; - }; - - si5332_0: si5332_0 { /* u17 */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - }; - - si5332_1: si5332_1 { /* u17 */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - si5332_2: si5332_2 { /* u17 */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <48000000>; - }; - - si5332_3: si5332_3 { /* u17 */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - }; - - si5332_4: si5332_4 { /* u17 */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <26000000>; - }; - - si5332_5: si5332_5 { /* u17 */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <27000000>; - }; -}; - -/* DP/USB 3.0 */ -&psgtr { - status = "okay"; - /* pcie, usb3, sata */ - clocks = <&si5332_5>, <&si5332_4>, <&si5332_0>; - clock-names = "ref0", "ref1", "ref2"; -}; - -&zynqmp_dpsub { - status = "okay"; - phy-names = "dp-phy0", "dp-phy1"; - phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>; - assigned-clock-rates = <27000000>, <25000000>, <300000000>; -}; - -&zynqmp_dpdma { - status = "okay"; - assigned-clock-rates = <600000000>; -}; - -&usb0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb0_default>; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 1>; - assigned-clock-rates = <250000000>, <20000000>; - - usb5744: usb-hub { /* u43 */ - status = "okay"; - compatible = "microchip,usb5744"; - i2c-bus = <&i2c1>; - reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>; - }; -}; - -&dwc3_0 { - status = "okay"; - dr_mode = "host"; - snps,usb3_lpm_capable; - maximum-speed = "super-speed"; -}; - -&sdhci1 { /* on CC with tuned parameters */ - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sdhci1_default>; - /* - * SD 3.0 requires level shifter and this property - * should be removed if the board has level shifter and - * need to work in UHS mode - */ - no-1-8-v; - disable-wp; - xlnx,mio-bank = <1>; - clk-phase-sd-hs = <126>, <60>; - clk-phase-uhs-sdr25 = <120>, <60>; - clk-phase-uhs-ddr50 = <126>, <48>; - assigned-clock-rates = <187498123>; - bus-width = <8>; -}; - -&gem3 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gem3_default>; - phy-handle = <&phy0>; - phy-mode = "rgmii-id"; - assigned-clock-rates = <250000000>; - - mdio: mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy0: ethernet-phy@1 { - #phy-cells = <1>; - reg = <1>; - compatible = "ethernet-phy-id2000.a231"; - ti,rx-internal-delay = ; - ti,tx-internal-delay = ; - ti,fifo-depth = ; - ti,dp83867-rxctrl-strap-quirk; - reset-assert-us = <100>; - reset-deassert-us = <280>; - reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&pinctrl0 { - status = "okay"; - - pinctrl_uart1_default: uart1-default { - conf { - groups = "uart1_9_grp"; - slew-rate = ; - power-source = ; - drive-strength = <12>; - }; - - conf-rx { - pins = "MIO37"; - bias-high-impedance; - }; - - conf-tx { - pins = "MIO36"; - bias-disable; - output-enable; - }; - - mux { - groups = "uart1_9_grp"; - function = "uart1"; - }; - }; - - pinctrl_i2c1_default: i2c1-default { - conf { - groups = "i2c1_6_grp"; - bias-pull-up; - slew-rate = ; - power-source = ; - }; - - mux { - groups = "i2c1_6_grp"; - function = "i2c1"; - }; - }; - - pinctrl_i2c1_gpio: i2c1-gpio { - conf { - groups = "gpio0_24_grp", "gpio0_25_grp"; - slew-rate = ; - power-source = ; - }; - - mux { - groups = "gpio0_24_grp", "gpio0_25_grp"; - function = "gpio0"; - }; - }; - - pinctrl_gem3_default: gem3-default { - conf { - groups = "ethernet3_0_grp"; - slew-rate = ; - power-source = ; - }; - - conf-rx { - pins = "MIO70", "MIO72", "MIO74"; - bias-high-impedance; - low-power-disable; - }; - - conf-bootstrap { - pins = "MIO71", "MIO73", "MIO75"; - bias-disable; - output-enable; - low-power-disable; - }; - - conf-tx { - pins = "MIO64", "MIO65", "MIO66", - "MIO67", "MIO68", "MIO69"; - bias-disable; - output-enable; - low-power-enable; - }; - - conf-mdio { - groups = "mdio3_0_grp"; - slew-rate = ; - power-source = ; - bias-disable; - output-enable; - }; - - mux-mdio { - function = "mdio3"; - groups = "mdio3_0_grp"; - }; - - mux { - function = "ethernet3"; - groups = "ethernet3_0_grp"; - }; - }; - - pinctrl_usb0_default: usb0-default { - conf { - groups = "usb0_0_grp"; - power-source = ; - }; - - conf-rx { - pins = "MIO52", "MIO53", "MIO55"; - bias-high-impedance; - drive-strength = <12>; - slew-rate = ; - }; - - conf-tx { - pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", - "MIO60", "MIO61", "MIO62", "MIO63"; - bias-disable; - output-enable; - drive-strength = <4>; - slew-rate = ; - }; - - mux { - groups = "usb0_0_grp"; - function = "usb0"; - }; - }; - - pinctrl_sdhci1_default: sdhci1-default { - conf { - groups = "sdio1_0_grp"; - slew-rate = ; - power-source = ; - bias-disable; - }; - - conf-cd { - groups = "sdio1_cd_0_grp"; - bias-high-impedance; - bias-pull-up; - slew-rate = ; - power-source = ; - }; - - mux-cd { - groups = "sdio1_cd_0_grp"; - function = "sdio1_cd"; - }; - - mux { - groups = "sdio1_0_grp"; - function = "sdio1"; - }; - }; -}; - -&uart1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_default>; -}; diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso b/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso new file mode 100644 index 00000000000..1b1d9e772f5 --- /dev/null +++ b/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso @@ -0,0 +1,339 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for KV260 revA Carrier Card + * + * (C) Copyright 2020 - 2021, Xilinx, Inc. + * + * Michal Simek + */ + +#include +#include +#include +#include + +/dts-v1/; +/plugin/; + +&{/} { + compatible = "xlnx,zynqmp-sk-kv260-rev2", + "xlnx,zynqmp-sk-kv260-rev1", + "xlnx,zynqmp-sk-kv260-revB", + "xlnx,zynqmp-sk-kv260", "xlnx,zynqmp"; + model = "ZynqMP KV260 revB"; +}; + +&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + u14: ina260@40 { /* u14 */ + compatible = "ti,ina260"; + #io-channel-cells = <1>; + label = "ina260-u14"; + reg = <0x40>; + }; + /* u43 - 0x2d - USB hub */ + /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */ +}; + +&amba { + ina260-u14 { + compatible = "iio-hwmon"; + io-channels = <&u14 0>, <&u14 1>, <&u14 2>; + }; + + si5332_0: si5332_0 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + si5332_1: si5332_1 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + si5332_2: si5332_2 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; + + si5332_3: si5332_3 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + si5332_4: si5332_4 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + si5332_5: si5332_5 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; +}; + +/* DP/USB 3.0 */ +&psgtr { + status = "okay"; + /* pcie, usb3, sata */ + clocks = <&si5332_5>, <&si5332_4>, <&si5332_0>; + clock-names = "ref0", "ref1", "ref2"; +}; + +&zynqmp_dpsub { + status = "okay"; + phy-names = "dp-phy0", "dp-phy1"; + phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>; + assigned-clock-rates = <27000000>, <25000000>, <300000000>; +}; + +&zynqmp_dpdma { + status = "okay"; + assigned-clock-rates = <600000000>; +}; + +&usb0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 1>; + assigned-clock-rates = <250000000>, <20000000>; + + usb5744: usb-hub { /* u43 */ + status = "okay"; + compatible = "microchip,usb5744"; + i2c-bus = <&i2c1>; + reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>; + }; +}; + +&dwc3_0 { + status = "okay"; + dr_mode = "host"; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; +}; + +&sdhci1 { /* on CC with tuned parameters */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci1_default>; + /* + * SD 3.0 requires level shifter and this property + * should be removed if the board has level shifter and + * need to work in UHS mode + */ + no-1-8-v; + disable-wp; + xlnx,mio-bank = <1>; + clk-phase-sd-hs = <126>, <60>; + clk-phase-uhs-sdr25 = <120>, <60>; + clk-phase-uhs-ddr50 = <126>, <48>; + assigned-clock-rates = <187498123>; + bus-width = <8>; +}; + +&gem3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem3_default>; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + assigned-clock-rates = <250000000>; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@1 { + #phy-cells = <1>; + reg = <1>; + compatible = "ethernet-phy-id2000.a231"; + ti,rx-internal-delay = ; + ti,tx-internal-delay = ; + ti,fifo-depth = ; + ti,dp83867-rxctrl-strap-quirk; + reset-assert-us = <100>; + reset-deassert-us = <280>; + reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pinctrl0 { + status = "okay"; + + pinctrl_uart1_default: uart1-default { + conf { + groups = "uart1_9_grp"; + slew-rate = ; + power-source = ; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO37"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO36"; + bias-disable; + output-enable; + }; + + mux { + groups = "uart1_9_grp"; + function = "uart1"; + }; + }; + + pinctrl_i2c1_default: i2c1-default { + conf { + groups = "i2c1_6_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + + mux { + groups = "i2c1_6_grp"; + function = "i2c1"; + }; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + conf { + groups = "gpio0_24_grp", "gpio0_25_grp"; + slew-rate = ; + power-source = ; + }; + + mux { + groups = "gpio0_24_grp", "gpio0_25_grp"; + function = "gpio0"; + }; + }; + + pinctrl_gem3_default: gem3-default { + conf { + groups = "ethernet3_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO70", "MIO72", "MIO74"; + bias-high-impedance; + low-power-disable; + }; + + conf-bootstrap { + pins = "MIO71", "MIO73", "MIO75"; + bias-disable; + output-enable; + low-power-disable; + }; + + conf-tx { + pins = "MIO64", "MIO65", "MIO66", + "MIO67", "MIO68", "MIO69"; + bias-disable; + output-enable; + low-power-enable; + }; + + conf-mdio { + groups = "mdio3_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + output-enable; + }; + + mux-mdio { + function = "mdio3"; + groups = "mdio3_0_grp"; + }; + + mux { + function = "ethernet3"; + groups = "ethernet3_0_grp"; + }; + }; + + pinctrl_usb0_default: usb0-default { + conf { + groups = "usb0_0_grp"; + power-source = ; + }; + + conf-rx { + pins = "MIO52", "MIO53", "MIO55"; + bias-high-impedance; + drive-strength = <12>; + slew-rate = ; + }; + + conf-tx { + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", + "MIO60", "MIO61", "MIO62", "MIO63"; + bias-disable; + output-enable; + drive-strength = <4>; + slew-rate = ; + }; + + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + }; + + pinctrl_sdhci1_default: sdhci1-default { + conf { + groups = "sdio1_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + + conf-cd { + groups = "sdio1_cd_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + + mux-cd { + groups = "sdio1_cd_0_grp"; + function = "sdio1_cd"; + }; + + mux { + groups = "sdio1_0_grp"; + function = "sdio1"; + }; + }; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; +}; -- cgit v1.3.1