From 74752baa738ee9dafe69d726910e26da56f6f722 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Thu, 6 Dec 2012 13:33:16 +0000 Subject: spl: Change PAD_TO to CONFIG_SPL_PAD_TO This was already used by some SPL targets, and allows the pad amount to be specified by board config headers rather than only in makefile fragments. Also supply a pad-to of zero if the variable is undefined. It works without this, but this avoids relying on undocumented behavior. Signed-off-by: Scott Wood Signed-off-by: Kim Phillips --- Makefile | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'Makefile') diff --git a/Makefile b/Makefile index 9d434993cc4..7e16da94d9a 100644 --- a/Makefile +++ b/Makefile @@ -485,8 +485,12 @@ $(obj)u-boot.sha1: $(obj)u-boot.bin $(obj)u-boot.dis: $(obj)u-boot $(OBJDUMP) -d $< > $@ + + $(obj)u-boot-with-spl.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin - $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin + $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(or $(CONFIG_SPL_PAD_TO),0) \ + -O binary $(obj)spl/u-boot-spl \ + $(obj)spl/u-boot-spl-pad.bin cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@ rm $(obj)spl/u-boot-spl-pad.bin -- cgit v1.3.1 From 6d6c0baebe14fd94b5462f098ce03b532e561759 Mon Sep 17 00:00:00 2001 From: Tom Warren Date: Tue, 11 Dec 2012 13:34:17 +0000 Subject: Tegra30: Add generic Tegra30 build support This patch adds basic Tegra30 (T30) build support - no specific board is targeted. Signed-off-by: Tom Warren Reviewed-by: Stephen Warren --- Makefile | 6 +++--- arch/arm/cpu/armv7/Makefile | 2 +- arch/arm/cpu/armv7/start.S | 4 ++-- board/nvidia/common/board.c | 17 ++++++++++++++--- include/serial.h | 2 +- spl/Makefile | 2 +- 6 files changed, 22 insertions(+), 11 deletions(-) (limited to 'Makefile') diff --git a/Makefile b/Makefile index 3305e8cd1c0..ff72deb831a 100644 --- a/Makefile +++ b/Makefile @@ -348,7 +348,7 @@ endif ifeq ($(SOC),exynos) LIBS-y += $(CPUDIR)/s5p-common/libs5p-common.o endif -ifeq ($(SOC),tegra20) +ifneq ($(CONFIG_TEGRA),) LIBS-y += arch/$(ARCH)/cpu/$(SOC)-common/lib$(SOC)-common.o LIBS-y += arch/$(ARCH)/cpu/tegra-common/libcputegra-common.o LIBS-y += $(CPUDIR)/tegra-common/libtegra-common.o @@ -413,7 +413,7 @@ ALL-$(CONFIG_SPL) += $(obj)$(subst ",,$(CONFIG_SPL_TARGET)) ALL-$(CONFIG_OF_SEPARATE) += $(obj)u-boot.dtb $(obj)u-boot-dtb.bin # enable combined SPL/u-boot/dtb rules for tegra -ifeq ($(SOC),tegra20) +ifneq ($(CONFIG_TEGRA),) ifeq ($(CONFIG_OF_SEPARATE),y) ALL-y += $(obj)u-boot-dtb-tegra.bin else @@ -530,7 +530,7 @@ $(obj)u-boot.spr: $(obj)u-boot.img $(obj)spl/u-boot-spl.bin conv=notrunc 2>/dev/null cat $(obj)spl/u-boot-spl-pad.img $(obj)u-boot.img > $@ -ifeq ($(SOC),tegra20) +ifneq ($(CONFIG_TEGRA),) ifeq ($(CONFIG_OF_SEPARATE),y) nodtb=dtb dtbfile=$(obj)u-boot.dtb diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile index 4fdbee4bc0e..ee8c2b3fa57 100644 --- a/arch/arm/cpu/armv7/Makefile +++ b/arch/arm/cpu/armv7/Makefile @@ -32,7 +32,7 @@ COBJS += cache_v7.o COBJS += cpu.o COBJS += syslib.o -ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA20),) +ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA),) SOBJS += lowlevel_init.o endif diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index dcc1f831bc8..6b59529d5dd 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -251,12 +251,12 @@ ENTRY(c_runtime_cpu_setup) /* * Move vector table */ -#if !defined(CONFIG_TEGRA20) +#if !defined(CONFIG_TEGRA) /* Set vector address in CP15 VBAR register */ ldr r0, =_start add r0, r0, r9 mcr p15, 0, r0, c12, c0, 0 @Set VBAR -#endif /* !Tegra20 */ +#endif /* !Tegra */ bx lr diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c index 819c1204666..a4af5391b41 100644 --- a/board/nvidia/common/board.c +++ b/board/nvidia/common/board.c @@ -26,22 +26,30 @@ #include #include #include +#ifdef CONFIG_LCD #include -#include +#endif #include #include #include +#ifdef CONFIG_PWM_TEGRA #include +#endif #include -#include #include #include #include #include #include #include -#include +#ifdef CONFIG_TEGRA_CLOCK_SCALING +#include +#endif +#ifdef CONFIG_USB_EHCI_TEGRA +#include +#endif #include +#include #include "emc.h" DECLARE_GLOBAL_DATA_PTR; @@ -188,6 +196,9 @@ void gpio_early_init(void) __attribute__((weak, alias("__gpio_early_init"))); int board_early_init_f(void) { +#if defined(CONFIG_TEGRA30) + pinmux_init(); +#endif board_init_uart_f(); /* Initialize periph GPIOs */ diff --git a/include/serial.h b/include/serial.h index 14f863ed20e..f6bb2b90a1e 100644 --- a/include/serial.h +++ b/include/serial.h @@ -32,7 +32,7 @@ extern struct serial_device *default_serial_console(void); defined(CONFIG_MB86R0x) || defined(CONFIG_MPC5xxx) || \ defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) || \ defined(CONFIG_MPC86xx) || defined(CONFIG_SYS_SC520) || \ - defined(CONFIG_TEGRA20) || defined(CONFIG_SYS_COREBOOT) || \ + defined(CONFIG_TEGRA) || defined(CONFIG_SYS_COREBOOT) || \ defined(CONFIG_MICROBLAZE) extern struct serial_device serial0_device; extern struct serial_device serial1_device; diff --git a/spl/Makefile b/spl/Makefile index 6dbb1055b6d..842f1545569 100644 --- a/spl/Makefile +++ b/spl/Makefile @@ -86,7 +86,7 @@ ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),) LIBS-y += $(CPUDIR)/omap-common/libomap-common.o endif -ifeq ($(SOC),tegra20) +ifneq ($(CONFIG_TEGRA),) LIBS-y += arch/$(ARCH)/cpu/$(SOC)-common/lib$(SOC)-common.o LIBS-y += arch/$(ARCH)/cpu/tegra-common/libcputegra-common.o LIBS-y += $(CPUDIR)/tegra-common/libtegra-common.o -- cgit v1.3.1 From a32e626f92415290b7924930a7e3b80df6884090 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Thu, 14 Feb 2013 04:18:53 +0000 Subject: x86: Remove unneeded cruft from main Makefile These lines are dealt with in the x86 Makefile and link script, so punt them. Signed-off-by: Simon Glass Acked-by: Gabe Black --- Makefile | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'Makefile') diff --git a/Makefile b/Makefile index 35eee704dd1..fc18dd4cc02 100644 --- a/Makefile +++ b/Makefile @@ -230,10 +230,6 @@ endif # U-Boot objects....order is important (i.e. start must be first) OBJS = $(CPUDIR)/start.o -ifeq ($(CPU),x86) -RESET_OBJS-$(CONFIG_X86_NO_RESET_VECTOR) += $(CPUDIR)/start16.o -RESET_OBJS-$(CONFIG_X86_NO_RESET_VECTOR) += $(CPUDIR)/resetvec.o -endif ifeq ($(CPU),ppc4xx) OBJS += $(CPUDIR)/resetvec.o endif @@ -241,7 +237,7 @@ ifeq ($(CPU),mpc85xx) OBJS += $(CPUDIR)/resetvec.o endif -OBJS := $(addprefix $(obj),$(OBJS) $(RESET_OBJS-)) +OBJS := $(addprefix $(obj),$(OBJS)) HAVE_VENDOR_COMMON_LIB = $(if $(wildcard board/$(VENDOR)/common/Makefile),y,n) -- cgit v1.3.1