From 16c8d5e76ae0f78f39a60608574adfe0feb9cc70 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Wed, 14 Jun 2006 17:45:53 +0200 Subject: Various USB related patches - Add support for mpc8xx USB device. - Add support for Common Device Class - Abstract Control Model USB console. - Add support for flow control in USB slave devices. - Add support for switching between gserial and cdc_acm using environment. - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h - Update usbcore slightly to ease host enumeration. - Fix non-portable endian problems in usbdcore and usbdcore_ep0. - Add AdderUSB_config as a defconfig to enable usage of the USB console by default with the Adder87x U-Boot port. Patches by Bryan O'Donoghue , 29 May 2006 --- Makefile | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'Makefile') diff --git a/Makefile b/Makefile index 41a3624ff58..45e850c5f62 100644 --- a/Makefile +++ b/Makefile @@ -58,7 +58,7 @@ ifeq ($(HOSTARCH),ppc) CROSS_COMPILE = else ifeq ($(ARCH),ppc) -CROSS_COMPILE = powerpc-linux- +CROSS_COMPILE = ppc_8xx- endif ifeq ($(ARCH),arm) CROSS_COMPILE = arm-linux- @@ -437,6 +437,9 @@ AdderII_config \ @echo "#define CONFIG_MPC852T" > include/config.h) @./mkconfig -a Adder ppc mpc8xx adder +AdderUSB_config: unconfig + @./mkconfig -a AdderUSB ppc mpc8xx adder + ADS860_config \ FADS823_config \ FADS850SAR_config \ -- cgit v1.3.1 From 96b8a05432f346f36493535c85320b70ec9c7c1b Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Mon, 16 Apr 2007 14:54:15 -0500 Subject: mpc83xx: Add MPC8313ERDB support. Signed-off-by: Scott Wood --- Makefile | 13 + board/mpc8313erdb/Makefile | 50 ++++ board/mpc8313erdb/config.mk | 1 + board/mpc8313erdb/mpc8313erdb.c | 116 ++++++++ board/mpc8313erdb/sdram.c | 133 ++++++++++ board/mpc8313erdb/u-boot.lds | 123 +++++++++ doc/README.mpc8313erdb | 83 ++++++ include/configs/MPC8313ERDB.h | 569 ++++++++++++++++++++++++++++++++++++++++ 8 files changed, 1088 insertions(+) create mode 100644 board/mpc8313erdb/Makefile create mode 100644 board/mpc8313erdb/config.mk create mode 100644 board/mpc8313erdb/mpc8313erdb.c create mode 100644 board/mpc8313erdb/sdram.c create mode 100644 board/mpc8313erdb/u-boot.lds create mode 100644 doc/README.mpc8313erdb create mode 100644 include/configs/MPC8313ERDB.h (limited to 'Makefile') diff --git a/Makefile b/Makefile index 94cda54c731..0b0c0d00e09 100644 --- a/Makefile +++ b/Makefile @@ -1689,6 +1689,19 @@ MPC8360EMDS_SLAVE_config: unconfig fi ; @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds +MPC8313ERDB_33_config \ +MPC8313ERDB_66_config: unconfig + @echo "" >include/config.h ; \ + if [ "$(findstring _33_,$@)" ] ; then \ + echo -n "...33M ..." ; \ + echo "#define CFG_33MHZ" >>include/config.h ; \ + fi ; \ + if [ "$(findstring _66_,$@)" ] ; then \ + echo -n "...66M..." ; \ + echo "#define CFG_66MHZ" >>include/config.h ; \ + fi ; + @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb + sbc8349_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349 diff --git a/board/mpc8313erdb/Makefile b/board/mpc8313erdb/Makefile new file mode 100644 index 00000000000..a987e510dd2 --- /dev/null +++ b/board/mpc8313erdb/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o sdram.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) crv $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/mpc8313erdb/config.mk b/board/mpc8313erdb/config.mk new file mode 100644 index 00000000000..f76826495ef --- /dev/null +++ b/board/mpc8313erdb/config.mk @@ -0,0 +1 @@ +TEXT_BASE = 0xFE000000 diff --git a/board/mpc8313erdb/mpc8313erdb.c b/board/mpc8313erdb/mpc8313erdb.c new file mode 100644 index 00000000000..999fe9e39bb --- /dev/null +++ b/board/mpc8313erdb/mpc8313erdb.c @@ -0,0 +1,116 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006-2007 + * + * Author: Scott Wood + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +int board_early_init_f(void) +{ +#ifndef CFG_8313ERDB_BROKEN_PMC + volatile immap_t *im = (immap_t *)CFG_IMMR; + + if (im->pmc.pmccr1 & PMCCR1_POWER_OFF) + gd->flags |= GD_FLG_SILENT; +#endif + + return 0; +} + +int checkboard(void) +{ + puts("Board: Freescale MPC8313ERDB\n"); + return 0; +} + +static struct pci_region pci_regions[] = { + { + bus_start: CFG_PCI1_MEM_BASE, + phys_start: CFG_PCI1_MEM_PHYS, + size: CFG_PCI1_MEM_SIZE, + flags: PCI_REGION_MEM | PCI_REGION_PREFETCH + }, + { + bus_start: CFG_PCI1_MMIO_BASE, + phys_start: CFG_PCI1_MMIO_PHYS, + size: CFG_PCI1_MMIO_SIZE, + flags: PCI_REGION_MEM + }, + { + bus_start: CFG_PCI1_IO_BASE, + phys_start: CFG_PCI1_IO_PHYS, + size: CFG_PCI1_IO_SIZE, + flags: PCI_REGION_IO + } +}; + +void pci_init_board(void) +{ + volatile immap_t *immr = (volatile immap_t *)CFG_IMMR; + volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk; + volatile law83xx_t *pci_law = immr->sysconf.pcilaw; + struct pci_region *reg[] = { pci_regions }; + int warmboot; + + /* Enable all 3 PCI_CLK_OUTPUTs. */ + clk->occr |= 0xe0000000; + + /* + * Configure PCI Local Access Windows + */ + pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR; + pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB; + + pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR; + pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB; + + warmboot = gd->bd->bi_bootflags & BOOTFLAG_WARM; +#ifndef CFG_8313ERDB_BROKEN_PMC + warmboot |= immr->pmc.pmccr1 & PMCCR1_POWER_OFF; +#endif + + mpc83xx_pci_init(1, reg, warmboot); +} + +#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ + u32 *p; + int len; + +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif + ft_cpu_setup(blob, bd); + + p = ft_get_prop(blob, "/memory/reg", &len); + if (p) { + *p++ = cpu_to_be32(bd->bi_memstart); + *p = cpu_to_be32(bd->bi_memsize); + } +} +#endif diff --git a/board/mpc8313erdb/sdram.c b/board/mpc8313erdb/sdram.c new file mode 100644 index 00000000000..4b6778837f2 --- /dev/null +++ b/board/mpc8313erdb/sdram.c @@ -0,0 +1,133 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006-2007 + * + * Authors: Nick.Spence@freescale.com + * Wilson.Lo@freescale.com + * scottwood@freescale.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include +#include + +#include + +#ifndef CFG_8313ERDB_BROKEN_PMC +static void resume_from_sleep(void) +{ + DECLARE_GLOBAL_DATA_PTR; + u32 magic = *(u32 *)0; + + typedef void (*func_t)(void); + func_t resume = *(func_t *)4; + + if (magic == 0xf5153ae5) + resume(); + + gd->flags &= ~GD_FLG_SILENT; + puts("\nResume from sleep failed: bad magic word\n"); +} +#endif + +/* Fixed sdram init -- doesn't use serial presence detect. + * + * This is useful for faster booting in configs where the RAM is unlikely + * to be changed, or for things like NAND booting where space is tight. + */ +static long fixed_sdram(void) +{ + volatile immap_t *im = (volatile immap_t *)CFG_IMMR; + u32 msize = CFG_DDR_SIZE * 1024 * 1024; + u32 msize_log2 = __ilog2(msize); + + im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12; + im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1); + im->sysconf.ddrcdr = CFG_DDRCDR_VALUE; + + /* + * Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg], + * or the DDR2 controller may fail to initialize correctly. + */ + udelay(50000); + + im->ddr.csbnds[0].csbnds = (msize - 1) >> 24; + im->ddr.cs_config[0] = CFG_DDR_CONFIG; + + /* Currently we use only one CS, so disable the other bank. */ + im->ddr.cs_config[1] = 0; + + im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL; + im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; + im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; + im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; + +#ifndef CFG_8313ERDB_BROKEN_PMC + if (im->pmc.pmccr1 & PMCCR1_POWER_OFF) + im->ddr.sdram_cfg = CFG_SDRAM_CFG | SDRAM_CFG_BI; + else +#endif + im->ddr.sdram_cfg = CFG_SDRAM_CFG; + + im->ddr.sdram_cfg2 = CFG_SDRAM_CFG2; + im->ddr.sdram_mode = CFG_DDR_MODE; + im->ddr.sdram_mode2 = CFG_DDR_MODE_2; + + im->ddr.sdram_interval = CFG_DDR_INTERVAL; + sync(); + + /* enable DDR controller */ + im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; + + return msize; +} + +long int initdram(int board_type) +{ + volatile immap_t *im = (volatile immap_t *)CFG_IMMR; + volatile lbus83xx_t *lbc = &im->lbus; + u32 msize; + + if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) + return -1; + + puts("Initializing\n"); + + /* DDR SDRAM - Main SODIMM */ + msize = fixed_sdram(); + + /* Local Bus setup lbcr and mrtpr */ + lbc->lbcr = CFG_LBC_LBCR; + lbc->mrtpr = CFG_LBC_MRTPR; + sync(); + +#ifndef CFG_8313ERDB_BROKEN_PMC + if (im->pmc.pmccr1 & PMCCR1_POWER_OFF) + resume_from_sleep(); +#endif + + puts(" DDR RAM: "); + /* return total bus SDRAM size(bytes) -- DDR */ + return msize; +} diff --git a/board/mpc8313erdb/u-boot.lds b/board/mpc8313erdb/u-boot.lds new file mode 100644 index 00000000000..937c87a27cd --- /dev/null +++ b/board/mpc8313erdb/u-boot.lds @@ -0,0 +1,123 @@ +/* + * (C) Copyright 2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/mpc83xx/start.o (.text) + *(.text) + *(.fixup) + *(.got1) + . = ALIGN(16); + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x0FFF) & 0xFFFFF000; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __fixup_entries = (. - _FIXUP_TABLE_) >> 2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(4096); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(4096); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} +ENTRY(_start) diff --git a/doc/README.mpc8313erdb b/doc/README.mpc8313erdb new file mode 100644 index 00000000000..7ad4cc76c32 --- /dev/null +++ b/doc/README.mpc8313erdb @@ -0,0 +1,83 @@ +Freescale MPC8313ERDB Board +----------------------------------------- + +1. Board Switches and Jumpers + + SW3 is used to set CFG_RESET_SOURCE. + + To boot the image at 0xFE000000 in NOR flash, use these DIP + switche settings for SW3 SW4: + + +------+ +------+ + | | | **** | + | **** | | | + +------+ ON +------+ ON + 4321 4321 + (where the '*' indicates the position of the tab of the switch.) + +2. Memory Map + The memory map looks like this: + + 0x0000_0000 0x07ff_ffff DDR 128M + 0x8000_0000 0x8fff_ffff PCI MEM 256M + 0x9000_0000 0x9fff_ffff PCI_MMIO 256M + 0xe000_0000 0xe00f_ffff IMMR 1M + 0xe200_0000 0xe20f_ffff PCI IO 16M + 0xe280_0000 0xe280_7fff NAND FLASH (CS1) 32K + 0xf000_0000 0xf001_ffff VSC7385 (CS2) 128K + 0xfa00_0000 0xfa00_7fff Board Status/ 32K + LED Control (CS3) + 0xfe00_0000 0xfe7f_ffff NOR FLASH (CS0) 8M + +3. Definitions + +3.1 Explanation of NEW definitions in: + + include/configs/MPC8313ERDB.h + + CONFIG_MPC83xx MPC83xx family + CONFIG_MPC831x MPC831x specific + CONFIG_MPC8313ERDB MPC8313ERDB board specific + +4. Compilation + + Assuming you're using BASH (or similar) as your shell: + + export CROSS_COMPILE=your-cross-compiler-prefix- + make distclean + make MPC8313ERDB_33_config + (or make MPC8313ERDB_66_config, depending on the speed of + the oscillator on your board) + make + +5. Downloading and Flashing Images + +5.1 Reflash U-boot Image using U-boot + + =>run tftpflash + + You may want to try + =>tftpboot $loadaddr $uboot + first, to make sure that the TFTP load will succeed before it + goes ahead and wipes out your current firmware. And of course, + have an alternate means of programming the flash available + if the new u-boot doesn't boot. + +5.2 Downloading and Booting Linux Kernel + + Ensure that all networking-related environment variables are set + properly (including ipaddr, serverip, gatewayip (if needed), + netmask, ethaddr, eth1addr, rootpath (if using NFS root), + fdtfile, and bootfile). + + Then, do one of the following, depending on whether you + want an NFS root or a ramdisk root: + + =>run nfsboot + or + =>run ramboot + +6 Notes + + Booting from NAND flash is not yet supported. + The console baudrate for MPC8313ERDB is 115200bps. diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h new file mode 100644 index 00000000000..2519c6b8b52 --- /dev/null +++ b/include/configs/MPC8313ERDB.h @@ -0,0 +1,569 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * History + * 20061201: Wilson Lo (Wilson.Lo@freescale.com) + * Initialized + * 20061210: Tanya Jiang (tanya.jiang@freescale.com) + * Code Cleanup + * 20070410: Scott Wood + * More cleanup + */ +/* + * mpc8313epb board configuration file + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 +#define CONFIG_MPC83XX 1 +#define CONFIG_MPC831X 1 +#define CONFIG_MPC8313 1 +#define CONFIG_MPC8313ERDB 1 + +#define CONFIG_PCI +#define CONFIG_83XX_GENERIC_PCI + +#ifdef CFG_66MHZ +#define CONFIG_83XX_CLKIN 66000000 /* in Hz */ +#elif defined(CFG_33MHZ) +#define CONFIG_83XX_CLKIN 33000000 /* in Hz */ +#else +#error Unknown oscillator frequency. +#endif + +#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN + +#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ + +#define CFG_IMMR 0xE0000000 + +#define CFG_MEMTEST_START 0x00001000 +#define CFG_MEMTEST_END 0x07f00000 + +/* Early revs of this board will lock up hard when attempting + * to access the PMC registers, unless a JTAG debugger is + * connected, or some resistor modifications are made. + */ +#define CFG_8313ERDB_BROKEN_PMC 1 + +#define CFG_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ +#define CFG_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ + +/* + * DDR Setup + */ +#define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/ +#define CFG_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE + +/* + * Manually set up DDR parameters, as this board does not + * seem to have the SPD connected to I2C. + */ +#define CFG_DDR_SIZE 128 /* MB */ +#define CFG_DDR_CONFIG ( CSCONFIG_EN | CSCONFIG_AP \ + | 0x00040000 /* TODO */ \ + | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10 ) + /* 0x80840102 */ + +#define CFG_DDR_TIMING_3 0x00000000 +#define CFG_DDR_TIMING_0 ( ( 0 << TIMING_CFG0_RWT_SHIFT ) \ + | ( 0 << TIMING_CFG0_WRT_SHIFT ) \ + | ( 0 << TIMING_CFG0_RRT_SHIFT ) \ + | ( 0 << TIMING_CFG0_WWT_SHIFT ) \ + | ( 2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT ) \ + | ( 2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT ) \ + | ( 8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT ) \ + | ( 2 << TIMING_CFG0_MRS_CYC_SHIFT ) ) + /* 0x00220802 */ +#define CFG_DDR_TIMING_1 ( ( 3 << TIMING_CFG1_PRETOACT_SHIFT ) \ + | ( 9 << TIMING_CFG1_ACTTOPRE_SHIFT ) \ + | ( 3 << TIMING_CFG1_ACTTORW_SHIFT ) \ + | ( 5 << TIMING_CFG1_CASLAT_SHIFT ) \ + | (13 << TIMING_CFG1_REFREC_SHIFT ) \ + | ( 3 << TIMING_CFG1_WRREC_SHIFT ) \ + | ( 2 << TIMING_CFG1_ACTTOACT_SHIFT ) \ + | ( 2 << TIMING_CFG1_WRTORD_SHIFT ) ) + /* 0x3935d322 */ +#define CFG_DDR_TIMING_2 ( ( 0 << TIMING_CFG2_ADD_LAT_SHIFT ) \ + | (31 << TIMING_CFG2_CPO_SHIFT ) \ + | ( 2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT ) \ + | ( 2 << TIMING_CFG2_RD_TO_PRE_SHIFT ) \ + | ( 2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT ) \ + | ( 3 << TIMING_CFG2_CKE_PLS_SHIFT ) \ + | (10 << TIMING_CFG2_FOUR_ACT_SHIFT) ) + /* 0x0f9048ca */ /* P9-45,may need tuning */ +#define CFG_DDR_INTERVAL ( ( 800 << SDRAM_INTERVAL_REFINT_SHIFT ) \ + | ( 100 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) ) + /* 0x03200064 */ +#if defined(CONFIG_DDR_2T_TIMING) +#define CFG_SDRAM_CFG ( SDRAM_CFG_SREN \ + | 3 << SDRAM_CFG_SDRAM_TYPE_SHIFT \ + | SDRAM_CFG_2T_EN \ + | SDRAM_CFG_DBW_32 ) +#else +#define CFG_SDRAM_CFG ( SDRAM_CFG_SREN \ + | 3 << SDRAM_CFG_SDRAM_TYPE_SHIFT \ + | SDRAM_CFG_32_BE ) + /* 0x43080000 */ +#endif +#define CFG_SDRAM_CFG2 0x00401000; +/* set burst length to 8 for 32-bit data path */ +#define CFG_DDR_MODE ( ( 0x4440 << SDRAM_MODE_ESD_SHIFT ) \ + | ( 0x0232 << SDRAM_MODE_SD_SHIFT ) ) + /* 0x44400232 */ +#define CFG_DDR_MODE_2 0x8000C000; + +#define CFG_DDR_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 + /*0x02000000*/ +#define CFG_DDRCDR_VALUE ( DDRCDR_EN \ + | DDRCDR_PZ_NOMZ \ + | DDRCDR_NZ_NOMZ \ + | DDRCDR_M_ODR ) + +/* + * FLASH on the Local Bus + */ +#define CFG_FLASH_CFI /* use the Common Flash Interface */ +#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ +#define CFG_FLASH_BASE 0xFE000000 /* start of FLASH */ +#define CFG_FLASH_SIZE 8 /* flash size in MB */ +#define CFG_FLASH_EMPTY_INFO /* display empty sectors */ +#define CFG_FLASH_USE_BUFFER_WRITE /* buffer up multiple bytes */ + +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* flash Base address */ \ + (2 << BR_PS_SHIFT) | /* 16 bit port size */ \ + BR_V) /* valid */ +#define CFG_OR0_PRELIM ( 0xFF000000 /* 16 MByte */ \ + | OR_GPCM_XACS \ + | OR_GPCM_SCY_9 \ + | OR_GPCM_EHTR \ + | OR_GPCM_EAD ) + /* 0xFF006FF7 TODO SLOW 16 MB flash size */ +#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* window base at flash base */ +#define CFG_LBLAWAR0_PRELIM 0x80000017 /* 16 MB window size */ + +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ +#define CFG_MAX_FLASH_SECT 135 /* sectors per device */ + +#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ + +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT +#endif + +#define CFG_INIT_RAM_LOCK 1 +#define CFG_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM*/ + +#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ + +/* + * Local Bus LCRR and LBCR regs + */ +#define CFG_LCRR LCRR_EADC_1 | LCRR_CLKDIV_2 /* 0x00010002 */ +#define CFG_LBC_LBCR ( 0x00040000 /* TODO */ \ + | (0xFF << LBCR_BMT_SHIFT) \ + | 0xF ) /* 0x0004ff0f */ + +#define CFG_LBC_MRTPR 0x20000000 /*TODO */ /* LB refresh timer prescal, 266MHz/32 */ + +/* drivers/nand/nand.c */ +#define CFG_NAND_BASE 0xE2800000 /* 0xF0000000 */ +#define CFG_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS 1 +#define CONFIG_MTD_NAND_VERIFY_WRITE + +#define CFG_BR1_PRELIM ( CFG_NAND_BASE \ + | (2<bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc8313@e0000000/serial@4500" + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_CLK get_bus_freq(0) + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} + +#define CFG_NS16550_COM1 (CFG_IMMR+0x4500) +#define CFG_NS16550_COM2 (CFG_IMMR+0x4600) + +/* Use the HUSH parser */ +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " + +/* I2C */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ +#define CONFIG_FSL_I2C +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_CMD_TREE +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 +#define CFG_I2C2_OFFSET 0x3100 + +/* TSEC */ +#define CFG_TSEC1_OFFSET 0x24000 +#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET) +#define CFG_TSEC2_OFFSET 0x25000 +#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET) +#define CONFIG_NET_MULTI + +/* + * General PCI + * Addresses are mapped 1-1. + */ +#define CFG_PCI1_MEM_BASE 0x80000000 +#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE +#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_MMIO_BASE 0x90000000 +#define CFG_PCI1_MMIO_PHYS CFG_PCI1_MMIO_BASE +#define CFG_PCI1_MMIO_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_IO_BASE 0x00000000 +#define CFG_PCI1_IO_PHYS 0xE2000000 +#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */ + +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ + +/* + * TSEC configuration + */ +#define CONFIG_TSEC_ENET /* TSEC ethernet support */ + +#ifndef CONFIG_NET_MULTI +#define CONFIG_NET_MULTI 1 +#endif + +#define CONFIG_GMII 1 /* MII PHY management */ +#define CONFIG_MPC83XX_TSEC1 1 + +#define CONFIG_MPC83XX_TSEC1_NAME "TSEC0" +#define CONFIG_MPC83XX_TSEC2 1 +#define CONFIG_MPC83XX_TSEC2_NAME "TSEC1" +#define TSEC1_PHY_ADDR 0x1c +#define TSEC2_PHY_ADDR 4 +#define TSEC1_PHYIDX 0 +#define TSEC2_PHYIDX 0 + +/* Options are: TSEC[0-1] */ +#define CONFIG_ETHPRIME "TSEC1" + +/* + * Configure on-board RTC + */ +#define CONFIG_RTC_DS1337 +#define CFG_I2C_RTC_ADDR 0x68 + +/* + * Environment + */ +#ifndef CFG_RAMBOOT + #define CFG_ENV_IS_IN_FLASH 1 + #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) + #define CFG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */ + #define CFG_ENV_SIZE 0x2000 + +/* Address and size of Redundant Environment Sector */ +#else + #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ + #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) + #define CFG_ENV_SIZE 0x2000 +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CFG_BASE_COMMANDS ( CONFIG_CMD_DFL \ + | CFG_CMD_PING \ + | CFG_CMD_DHCP \ + | CFG_CMD_I2C \ + | CFG_CMD_MII \ + | CFG_CMD_DATE \ + | CFG_CMD_PCI) + +#define CONFIG_CMDLINE_EDITING 1 + +#define CFG_RAMBOOT_COMMANDS (CFG_BASE_COMMANDS & \ + ~(CFG_CMD_ENV | CFG_CMD_LOADS)) + +#if defined(CFG_RAMBOOT) +#define CONFIG_COMMANDS CFG_RAMBOOT_COMMANDS +#else +#define CONFIG_COMMANDS CFG_BASE_COMMANDS +#endif + +#include + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LOAD_ADDR 0x2000000 /* default load address */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ + +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ + +/* Cache Configuration */ +#define CFG_DCACHE_SIZE 16384 +#define CFG_CACHELINE_SIZE 32 +#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ + +#define CFG_RCWH_PCIHOST 0x80000000 /* PCIHOST */ + +#ifdef CFG_66MHZ + +/* 66MHz IN, 133MHz CSB, 266 DDR, 266 CORE */ +/* 0x62040000 */ +#define CFG_HRCW_LOW (\ + 0x20000000 /* reserved, must be set */ |\ + HRCWL_DDRCM |\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_2X1 |\ + HRCWL_CSB_TO_CLKIN_2X1 |\ + HRCWL_CORE_TO_CSB_2X1) + +#elif defined(CFG_33MHZ) + +/* 33MHz IN, 165MHz CSB, 330 DDR, 330 CORE */ +/* 0x65040000 */ +#define CFG_HRCW_LOW (\ + 0x20000000 /* reserved, must be set */ |\ + HRCWL_DDRCM |\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_2X1 |\ + HRCWL_CSB_TO_CLKIN_5X1 |\ + HRCWL_CORE_TO_CSB_2X1) + +#endif + +/* 0xa0606c00 */ +#define CFG_HRCW_HIGH (\ + HRCWH_PCI_HOST |\ + HRCWH_PCI1_ARBITER_ENABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0X00000100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT |\ + HRCWH_RL_EXT_LEGACY |\ + HRCWH_TSEC1M_IN_RGMII |\ + HRCWH_TSEC2M_IN_RGMII |\ + HRCWH_BIG_ENDIAN |\ + HRCWH_LALE_NORMAL) + +/* System IO Config */ +#define CFG_SICRH (SICRH_TSOBI1 | SICRH_TSOBI2) /* RGMII */ +#define CFG_SICRL SICRL_USBDR /* Enable Internal USB Phy */ + +#define CFG_HID0_INIT 0x000000000 +#define CFG_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ + HID0_ENABLE_DYNAMIC_POWER_MANAGMENT) + +#define CFG_HID2 HID2_HBE + +/* DDR @ 0x00000000 */ +#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10) +#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) + +/* PCI @ 0x80000000 */ +#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_10) +#define CFG_IBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT2L (CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT2U (CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP) + +/* PCI2 not supported on 8313 */ +#define CFG_IBAT3L (0) +#define CFG_IBAT3U (0) +#define CFG_IBAT4L (0) +#define CFG_IBAT4U (0) + +/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ +#define CFG_IBAT5L (CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT5U (CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP) + +/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ +#define CFG_IBAT6L (0xF0000000 | BATL_PP_10) +#define CFG_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) + +#define CFG_IBAT7L (0) +#define CFG_IBAT7U (0) + +#define CFG_DBAT0L CFG_IBAT0L +#define CFG_DBAT0U CFG_IBAT0U +#define CFG_DBAT1L CFG_IBAT1L +#define CFG_DBAT1U CFG_IBAT1U +#define CFG_DBAT2L CFG_IBAT2L +#define CFG_DBAT2U CFG_IBAT2U +#define CFG_DBAT3L CFG_IBAT3L +#define CFG_DBAT3U CFG_IBAT3U +#define CFG_DBAT4L CFG_IBAT4L +#define CFG_DBAT4U CFG_IBAT4U +#define CFG_DBAT5L CFG_IBAT5L +#define CFG_DBAT5U CFG_IBAT5U +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +#define CFG_DBAT7L CFG_IBAT7L +#define CFG_DBAT7U CFG_IBAT7U + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +/* + * Environment Configuration + */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_ETHADDR 00:E0:0C:00:95:01 +#define CONFIG_HAS_ETH1 +#define CONFIG_ETH1ADDR 00:E0:0C:00:95:02 + +#define CONFIG_IPADDR 10.0.0.2 +#define CONFIG_SERVERIP 10.0.0.1 +#define CONFIG_GATEWAYIP 10.0.0.1 +#define CONFIG_NETMASK 255.0.0.0 +#define CONFIG_NETDEV eth1 + +#define CONFIG_HOSTNAME mpc8313erdb +#define CONFIG_ROOTPATH /nfs/root/path +#define CONFIG_BOOTFILE uImage +#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ +#define CONFIG_FDTFILE mpc8313erdb.dtb + +#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ +#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */ +#define CONFIG_BAUDRATE 115200 + +#define XMK_STR(x) #x +#define MK_STR(x) XMK_STR(x) + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=" MK_STR(CONFIG_NETDEV) "\0" \ + "ethprime=TSEC1\0" \ + "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ + "tftpflash=tftpboot $loadaddr $uboot; " \ + "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ + "erase " MK_STR(TEXT_BASE) " +$filesize; " \ + "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ + "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ + "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ + "fdtaddr=400000\0" \ + "fdtfile=" MK_STR(CONFIG_FDTFILE) "\0" \ + "console=ttyS0\0" \ + "setbootargs=setenv bootargs " \ + "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \ + "setipargs=setenv bootargs nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "root=$rootdev rw console=$console,$baudrate $othbootargs\0" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv rootdev /dev/nfs;" \ + "run setbootargs;" \ + "run setipargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv rootdev /dev/ram;" \ + "run setbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#undef MK_STR +#undef XMK_STR + +#endif /* __CONFIG_H */ -- cgit v1.3.1 From 5c5d3242935cf3543af01142627494434834cf98 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Wed, 25 Apr 2007 12:34:38 -0500 Subject: mpc83xx: minor fixups for 8313rdb introduction --- MAKEALL | 4 ++-- Makefile | 26 +++++++++++++------------- cpu/mpc83xx/pci.c | 1 + include/configs/MPC8313ERDB.h | 4 ++-- 4 files changed, 18 insertions(+), 17 deletions(-) (limited to 'Makefile') diff --git a/MAKEALL b/MAKEALL index 0f0ec296f26..a6b93b3c55b 100755 --- a/MAKEALL +++ b/MAKEALL @@ -132,8 +132,8 @@ LIST_8260=" \ ######################################################################### LIST_83xx=" \ - MPC832XEMDS MPC8349EMDS MPC8349ITX MPC8349ITXGP \ - MPC8360EMDS sbc8349 TQM834x \ + MPC8313ERDB MPC832XEMDS MPC8349EMDS MPC8349ITX + MPC8349ITXGP MPC8360EMDS sbc8349 TQM834x " diff --git a/Makefile b/Makefile index 0b0c0d00e09..f7fde1ebcfa 100644 --- a/Makefile +++ b/Makefile @@ -1624,6 +1624,19 @@ r5200_config : unconfig ## MPC83xx Systems ######################################################################### +MPC8313ERDB_33_config \ +MPC8313ERDB_66_config: unconfig + @echo "" >include/config.h ; \ + if [ "$(findstring _33_,$@)" ] ; then \ + echo -n "...33M ..." ; \ + echo "#define CFG_33MHZ" >>include/config.h ; \ + fi ; \ + if [ "$(findstring _66_,$@)" ] ; then \ + echo -n "...66M..." ; \ + echo "#define CFG_66MHZ" >>include/config.h ; \ + fi ; + @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb + MPC832XEMDS_config \ MPC832XEMDS_HOST_33_config \ MPC832XEMDS_HOST_66_config \ @@ -1689,19 +1702,6 @@ MPC8360EMDS_SLAVE_config: unconfig fi ; @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds -MPC8313ERDB_33_config \ -MPC8313ERDB_66_config: unconfig - @echo "" >include/config.h ; \ - if [ "$(findstring _33_,$@)" ] ; then \ - echo -n "...33M ..." ; \ - echo "#define CFG_33MHZ" >>include/config.h ; \ - fi ; \ - if [ "$(findstring _66_,$@)" ] ; then \ - echo -n "...66M..." ; \ - echo "#define CFG_66MHZ" >>include/config.h ; \ - fi ; - @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb - sbc8349_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349 diff --git a/cpu/mpc83xx/pci.c b/cpu/mpc83xx/pci.c index 2a2b0bd9028..785d6129daf 100644 --- a/cpu/mpc83xx/pci.c +++ b/cpu/mpc83xx/pci.c @@ -25,6 +25,7 @@ #include #include +#include #include #ifdef CONFIG_83XX_GENERIC_PCI diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 2519c6b8b52..11858bfb8f6 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -47,9 +47,9 @@ #define CONFIG_83XX_GENERIC_PCI #ifdef CFG_66MHZ -#define CONFIG_83XX_CLKIN 66000000 /* in Hz */ +#define CONFIG_83XX_CLKIN 66666667 /* in Hz */ #elif defined(CFG_33MHZ) -#define CONFIG_83XX_CLKIN 33000000 /* in Hz */ +#define CONFIG_83XX_CLKIN 33333333 /* in Hz */ #else #error Unknown oscillator frequency. #endif -- cgit v1.3.1 From 29f3be0caf0799ca6b89dfd9824c15619a50000f Mon Sep 17 00:00:00 2001 From: Peter Pearse Date: Wed, 9 May 2007 10:24:38 +0100 Subject: Makefile permissions --- Makefile | 0 1 file changed, 0 insertions(+), 0 deletions(-) mode change 100644 => 100755 Makefile (limited to 'Makefile') diff --git a/Makefile b/Makefile old mode 100644 new mode 100755 -- cgit v1.3.1 From b0d8f5bf0d215adc9424cb228b2484dbf07f7761 Mon Sep 17 00:00:00 2001 From: Peter Pearse Date: Wed, 9 May 2007 11:37:56 +0100 Subject: New board SMN42 branch --- MAKEALL | 2 +- Makefile | 5 +- board/lpc2292sodimm/Makefile | 35 ++--- board/lpc2292sodimm/flash.c | 240 ++------------------------------ common/soft_i2c.c | 3 + disk/part.c | 1 + drivers/Makefile | 2 +- fs/fat/fat.c | 7 +- include/asm-arm/arch-arm720t/hardware.h | 2 - include/configs/lpc2292sodimm.h | 14 +- 10 files changed, 43 insertions(+), 268 deletions(-) (limited to 'Makefile') diff --git a/MAKEALL b/MAKEALL index d7cd8d74203..17ea97ea22b 100755 --- a/MAKEALL +++ b/MAKEALL @@ -185,7 +185,7 @@ LIST_SA="assabet dnp1110 gcplus lart shannon" LIST_ARM7=" \ armadillo B2 ep7312 evb4510 \ impa7 integratorap ap7 ap720t \ - lpc2292sodimm modnet50 \ + lpc2292sodimm modnet50 SMN42 \ " ######################################################################### diff --git a/Makefile b/Makefile index ceee2c7bed3..3e547fdb306 100755 --- a/Makefile +++ b/Makefile @@ -2100,7 +2100,10 @@ evb4510_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm720t evb4510 lpc2292sodimm_config: unconfig - @$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm + @$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm NULL lpc2292 + +SMN42_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292 ######################################################################### ## XScale Systems diff --git a/board/lpc2292sodimm/Makefile b/board/lpc2292sodimm/Makefile index 5a30198e21a..18a95d7f9b8 100644 --- a/board/lpc2292sodimm/Makefile +++ b/board/lpc2292sodimm/Makefile @@ -1,7 +1,6 @@ # -# (C) Copyright 2002 -# Sysgo Real-Time Solutions, GmbH -# Marius Groeger +# (C) Copyright 2007 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this # project. @@ -24,35 +23,29 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := lpc2292sodimm.o flash.o mmc.o spi.o mmc_hw.o eth.o -SOBJS := lowlevel_init.o iap_entry.o +COBJS := flash.o lpc2292sodimm.o +SOBJTS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $(OBJS) $(SOBJS) +SRCS := $(SOBJTS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJTS)) -# this MUST be compiled as thumb code! -iap_entry.o: - arm-linux-gcc -D__ASSEMBLY__ -g -Os -fno-strict-aliasing \ - -fno-common -ffixed-r8 -msoft-float -D__KERNEL__ \ - -DTEXT_BASE=0x81500000 -I/home/garyj/proj/LPC/u-boot/include \ - -fno-builtin -ffreestanding -nostdinc -isystem \ - /opt/eldk/arm/usr/bin/../lib/gcc/arm-linux/4.0.0/include -pipe \ - -DCONFIG_ARM -D__ARM__ -march=armv4t -mtune=arm7tdmi -mabi=apcs-gnu \ - -c -o iap_entry.o iap_entry.S +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) distclean: clean - rm -f $(LIB) core *.bak .depend + rm -f $(LIB) core *.bak $(obj).depend ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/lpc2292sodimm/flash.c b/board/lpc2292sodimm/flash.c index 55aaabfe6f6..0fb08430c53 100644 --- a/board/lpc2292sodimm/flash.c +++ b/board/lpc2292sodimm/flash.c @@ -1,6 +1,9 @@ /* * (C) Copyright 2006 Embedded Artists AB * + * Modified to use the routines in cpu/arm720t/lpc2292/flash.c by + * Gary Jennejohn + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of @@ -20,84 +23,16 @@ #include #include -/* IAP commands use 32 bytes at the top of CPU internal sram, we - use 512 bytes below that */ -#define COPY_BUFFER_LOCATION 0x40003de0 - -#define IAP_LOCATION 0x7ffffff1 -#define IAP_CMD_PREPARE 50 -#define IAP_CMD_COPY 51 -#define IAP_CMD_ERASE 52 -#define IAP_CMD_CHECK 53 -#define IAP_CMD_ID 54 -#define IAP_CMD_VERSION 55 -#define IAP_CMD_COMPARE 56 - -#define IAP_RET_CMD_SUCCESS 0 - #define SST_BASEADDR 0x80000000 #define SST_ADDR1 ((volatile ushort*)(SST_BASEADDR + (0x5555 << 1))) #define SST_ADDR2 ((volatile ushort*)(SST_BASEADDR + (0x2AAA << 1))) -static unsigned long command[5]; -static unsigned long result[2]; - flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; -extern void iap_entry(unsigned long * command, unsigned long * result); - -/*----------------------------------------------------------------------- - * - */ -int get_flash_sector(flash_info_t * info, ulong flash_addr) -{ - int i; - - for(i=1; i < (info->sector_count); i++) { - if (flash_addr < (info->start[i])) - break; - } - - return (i-1); -} - -/*----------------------------------------------------------------------- - * This function assumes that flash_addr is aligned on 512 bytes boundary - * in flash. This function also assumes that prepare have been called - * for the sector in question. - */ -int copy_buffer_to_flash(flash_info_t * info, ulong flash_addr) -{ - int first_sector; - int last_sector; - - first_sector = get_flash_sector(info, flash_addr); - last_sector = get_flash_sector(info, flash_addr + 512 - 1); - - /* prepare sectors for write */ - command[0] = IAP_CMD_PREPARE; - command[1] = first_sector; - command[2] = last_sector; - iap_entry(command, result); - if (result[0] != IAP_RET_CMD_SUCCESS) { - printf("IAP prepare failed\n"); - return ERR_PROG_ERROR; - } - - command[0] = IAP_CMD_COPY; - command[1] = flash_addr; - command[2] = COPY_BUFFER_LOCATION; - command[3] = 512; - command[4] = CFG_SYS_CLK_FREQ >> 10; - iap_entry(command, result); - if (result[0] != IAP_RET_CMD_SUCCESS) { - printf("IAP copy failed\n"); - return 1; - } - - return 0; -} +extern int lpc2292_copy_buffer_to_flash(flash_info_t *, ulong); +extern int lpc2292_flash_erase(flash_info_t *, int, int); +extern int lpc2292_write_buff (flash_info_t *, uchar *, ulong, ulong); /*----------------------------------------------------------------------- * @@ -220,56 +155,6 @@ void flash_print_info (flash_info_t * info) printf ("\n"); } -/*----------------------------------------------------------------------- - */ - -int flash_erase_philips (flash_info_t * info, int s_first, int s_last) -{ - int flag; - int prot; - int sect; - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - if (prot) - return ERR_PROTECTED; - - - flag = disable_interrupts(); - - printf ("Erasing %d sectors starting at sector %2d.\n" - "This make take some time ... ", - s_last - s_first + 1, s_first); - - command[0] = IAP_CMD_PREPARE; - command[1] = s_first; - command[2] = s_last; - iap_entry(command, result); - if (result[0] != IAP_RET_CMD_SUCCESS) { - printf("IAP prepare failed\n"); - return ERR_PROTECTED; - } - - command[0] = IAP_CMD_ERASE; - command[1] = s_first; - command[2] = s_last; - command[3] = CFG_SYS_CLK_FREQ >> 10; - iap_entry(command, result); - if (result[0] != IAP_RET_CMD_SUCCESS) { - printf("IAP erase failed\n"); - return ERR_PROTECTED; - } - - if (flag) - enable_interrupts(); - - return ERR_OK; -} - int flash_erase_sst (flash_info_t * info, int s_first, int s_last) { int i; @@ -294,7 +179,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) case (SST_MANUFACT & FLASH_VENDMASK): return flash_erase_sst(info, s_first, s_last); case (PHILIPS_LPC2292 & FLASH_VENDMASK): - return flash_erase_philips(info, s_first, s_last); + return lpc2292_flash_erase(info, s_first, s_last); default: return ERR_PROTECTED; } @@ -353,122 +238,13 @@ int write_buff_sst (flash_info_t * info, uchar * src, ulong addr, ulong cnt) return ret; } -int write_buff_philips (flash_info_t * info, - uchar * src, - ulong addr, - ulong cnt) -{ - int first_copy_size; - int last_copy_size; - int first_block; - int last_block; - int nbr_mid_blocks; - uchar memmap_value; - ulong i; - uchar* src_org; - uchar* dst_org; - int ret = ERR_OK; - - src_org = src; - dst_org = (uchar*)addr; - - first_block = addr / 512; - last_block = (addr + cnt) / 512; - nbr_mid_blocks = last_block - first_block - 1; - - first_copy_size = 512 - (addr % 512); - last_copy_size = (addr + cnt) % 512; - -#if 0 - printf("\ncopy first block: (1) %lX -> %lX 0x200 bytes, " - "(2) %lX -> %lX 0x%X bytes, (3) %lX -> %lX 0x200 bytes\n", - (ulong)(first_block * 512), - (ulong)COPY_BUFFER_LOCATION, - (ulong)src, - (ulong)(COPY_BUFFER_LOCATION + 512 - first_copy_size), - first_copy_size, - (ulong)COPY_BUFFER_LOCATION, - (ulong)(first_block * 512)); -#endif - - /* copy first block */ - memcpy((void*)COPY_BUFFER_LOCATION, - (void*)(first_block * 512), 512); - memcpy((void*)(COPY_BUFFER_LOCATION + 512 - first_copy_size), - src, first_copy_size); - copy_buffer_to_flash(info, first_block * 512); - src += first_copy_size; - addr += first_copy_size; - - /* copy middle blocks */ - for (i = 0; i < nbr_mid_blocks; i++) { -#if 0 - printf("copy middle block: %lX -> %lX 512 bytes, " - "%lX -> %lX 512 bytes\n", - (ulong)src, - (ulong)COPY_BUFFER_LOCATION, - (ulong)COPY_BUFFER_LOCATION, - (ulong)addr); -#endif - memcpy((void*)COPY_BUFFER_LOCATION, src, 512); - copy_buffer_to_flash(info, addr); - src += 512; - addr += 512; - } - - - if (last_copy_size > 0) { -#if 0 - printf("copy last block: (1) %lX -> %lX 0x200 bytes, " - "(2) %lX -> %lX 0x%X bytes, (3) %lX -> %lX x200 bytes\n", - (ulong)(last_block * 512), - (ulong)COPY_BUFFER_LOCATION, - (ulong)src, - (ulong)(COPY_BUFFER_LOCATION), - last_copy_size, - (ulong)COPY_BUFFER_LOCATION, - (ulong)addr); -#endif - /* copy last block */ - memcpy((void*)COPY_BUFFER_LOCATION, - (void*)(last_block * 512), 512); - memcpy((void*)COPY_BUFFER_LOCATION, - src, last_copy_size); - copy_buffer_to_flash(info, addr); - } - - /* verify write */ - memmap_value = GET8(MEMMAP); - - disable_interrupts(); - - PUT8(MEMMAP, 01); /* we must make sure that initial 64 - bytes are taken from flash when we - do the compare */ - - for (i = 0; i < cnt; i++) { - if (*dst_org != *src_org){ - printf("Write failed. Byte %lX differs\n", i); - ret = ERR_PROG_ERROR; - break; - } - dst_org++; - src_org++; - } - - PUT8(MEMMAP, memmap_value); - enable_interrupts(); - - return ret; -} - int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) { switch (info->flash_id & FLASH_VENDMASK) { case (SST_MANUFACT & FLASH_VENDMASK): return write_buff_sst(info, src, addr, cnt); case (PHILIPS_LPC2292 & FLASH_VENDMASK): - return write_buff_philips(info, src, addr, cnt); + return lpc2292_write_buff(info, src, addr, cnt); default: return ERR_PROG_ERROR; } diff --git a/common/soft_i2c.c b/common/soft_i2c.c index edad51bc418..0f6e3a938d2 100644 --- a/common/soft_i2c.c +++ b/common/soft_i2c.c @@ -36,6 +36,9 @@ #ifdef CONFIG_IXP425 /* only valid for IXP425 */ #include #endif +#ifdef CONFIG_LPC2292 +#include +#endif #include #if defined(CONFIG_SOFT_I2C) diff --git a/disk/part.c b/disk/part.c index acc1a748e44..54de737c3ba 100644 --- a/disk/part.c +++ b/disk/part.c @@ -180,6 +180,7 @@ void dev_print (block_dev_desc_t *dev_desc) (CONFIG_COMMANDS & CFG_CMD_SCSI) || \ (CONFIG_COMMANDS & CFG_CMD_USB) || \ defined(CONFIG_MMC) || \ + (defined(CONFIG_MMC) && defined(CONFIG_LPC2292)) || \ defined(CONFIG_SYSTEMACE) ) #if defined(CONFIG_MAC_PARTITION) || \ diff --git a/drivers/Makefile b/drivers/Makefile index d68cba682be..c7fcc3f23e5 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -30,7 +30,7 @@ LIB = $(obj)libdrivers.a COBJS = 3c589.o 5701rls.o ali512x.o atmel_usart.o \ bcm570x.o bcm570x_autoneg.o cfb_console.o cfi_flash.o \ cs8900.o ct69000.o dataflash.o dc2114x.o dm9000x.o \ - e1000.o eepro100.o \ + e1000.o eepro100.o enc28j60.o \ i8042.o inca-ip_sw.o keyboard.o \ lan91c96.o macb.o \ natsemi.o ne2000.o netarm_eth.o netconsole.o \ diff --git a/fs/fat/fat.c b/fs/fat/fat.c index a823b5aba40..084ee44459e 100644 --- a/fs/fat/fat.c +++ b/fs/fat/fat.c @@ -89,8 +89,11 @@ fat_register_device(block_dev_desc_t *dev_desc, int part_no) part_offset=0; } else { -#if (CONFIG_COMMANDS & CFG_CMD_IDE) || (CONFIG_COMMANDS & CFG_CMD_SCSI) || \ - (CONFIG_COMMANDS & CFG_CMD_USB) || defined(CONFIG_SYSTEMACE) +#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || \ + (CONFIG_COMMANDS & CFG_CMD_SCSI) || \ + (CONFIG_COMMANDS & CFG_CMD_USB) || \ + (defined(CONFIG_MMC) && defined(CONFIG_LPC2292)) || \ + defined(CONFIG_SYSTEMACE) ) disk_partition_t info; if(!get_partition_info(dev_desc, part_no, &info)) { part_offset = info.start; diff --git a/include/asm-arm/arch-arm720t/hardware.h b/include/asm-arm/arch-arm720t/hardware.h index 1e9cd41169d..3056ca7f673 100644 --- a/include/asm-arm/arch-arm720t/hardware.h +++ b/include/asm-arm/arch-arm720t/hardware.h @@ -36,8 +36,6 @@ /* include armadillo specific hardware file if there was one */ #elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) /* include IntegratorCP/CM720T specific hardware file if there was one */ -#elif defined(CONFIG_LPC2292) -#include #else #error No hardware file defined for this configuration #endif diff --git a/include/configs/lpc2292sodimm.h b/include/configs/lpc2292sodimm.h index 7e515230a33..d817ea8d736 100644 --- a/include/configs/lpc2292sodimm.h +++ b/include/configs/lpc2292sodimm.h @@ -1,12 +1,8 @@ /* - * (C) Copyright 2000 - * Sysgo Real-Time Solutions, GmbH - * Marius Groeger + * (C) Copyright 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * Configuation settings for the EP7312 board. - * - * Modified to work on Armadillo HT1070 ARM720T board - * (C) Copyright 2005 Rowel Atienza rowel@diwalabs.com + * Configuation settings for the LPC2292SODIMM board from Embedded Artists. * * See file CREDITS for list of people who contributed to this * project. @@ -31,7 +27,7 @@ #define __CONFIG_H /* - * If we are developing, we might want to start armboot from ram + * If we are developing, we might want to start u-boot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ #undef CONFIG_INIT_CRITICAL /* undef for developing */ @@ -154,5 +150,7 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG #define CONFIG_MMC 1 +/* we use this ethernet chip */ +#define CONFIG_ENC28J60 #endif /* __CONFIG_H */ -- cgit v1.3.1 From 1443a31457d68f7e8f0b9403e9832ec1e79dc59d Mon Sep 17 00:00:00 2001 From: Peter Pearse Date: Fri, 18 May 2007 14:33:11 +0100 Subject: Makefile permissions --- Makefile | 0 1 file changed, 0 insertions(+), 0 deletions(-) mode change 100755 => 100644 Makefile (limited to 'Makefile') diff --git a/Makefile b/Makefile old mode 100755 new mode 100644 -- cgit v1.3.1 From ee1529838abbfaa35f14e3ffbeaaba693159475f Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Thu, 31 May 2007 17:20:09 +0200 Subject: Add support for STX GP3SSA (stxssa) Board with 4 MiB flash. Signed-off-by: Wolfgang Denk --- Makefile | 12 ++++++++++-- board/stxssa/config.mk | 3 +-- include/configs/stxssa.h | 41 ++++++++++++++++++++++++----------------- 3 files changed, 35 insertions(+), 21 deletions(-) (limited to 'Makefile') diff --git a/Makefile b/Makefile index 2fe9a4682fc..356fb916872 100644 --- a/Makefile +++ b/Makefile @@ -1771,8 +1771,16 @@ sbc8560_66_config: unconfig stxgp3_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3 -stxssa_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxssa +stxssa_config \ +stxssa_4M_config: unconfig + @mkdir -p $(obj)include + @if [ "$(findstring _4M_,$@)" ] ; then \ + echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \ + echo "... with 4 MiB flash memory" ; \ + else \ + >$(obj)include/config.h ; \ + fi + @$(MKCONFIG) -a stxssa ppc mpc85xx stxssa TQM8540_config \ TQM8541_config \ diff --git a/board/stxssa/config.mk b/board/stxssa/config.mk index 30f42c53aa0..5f4fc7403e2 100644 --- a/board/stxssa/config.mk +++ b/board/stxssa/config.mk @@ -22,13 +22,12 @@ # MA 02111-1307 USA # -# # default CCARBAR is at 0xff700000 # assume U-Boot is less than 0.5MB # U-Boot is less than 256K, so push # it further up into the flash # -TEXT_BASE = 0xfffC0000 +TEXT_BASE = 0xFFFC0000 PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1 PLATFORM_CPPFLAGS += -DCONFIG_E500=1 diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index 8624f4b74b8..1978a32bb1e 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -80,16 +80,20 @@ * This address, however, is used to configure a 256M local bus * window that includes the Config latch below. */ -#define CFG_LBC_OPTION_BASE 0xf0000000 /* Localbus Extension */ +#define CFG_LBC_OPTION_BASE 0xF0000000 /* Localbus Extension */ #define CFG_LBC_OPTION_SIZE 256 /* 256MB */ /* There are various flash options used, we configure for the largest, * which is 64Mbytes. The CFI works fine and will discover the proper * sizes. */ -#define CFG_FLASH_BASE 0xFC000000 /* start of FLASH 64M */ -#define CFG_BR0_PRELIM 0xFC001801 /* port size 32bit */ -#define CFG_OR0_PRELIM 0xFC000FF7 /* 64 MB Flash */ +#ifdef CONFIG_STXSSA_4M +#define CFG_FLASH_BASE 0xFFC00000 /* start of 4 MiB flash */ +#else +#define CFG_FLASH_BASE 0xFC000000 /* start of 64 MiB flash */ +#endif +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | 0x1801) /* port size 32bit */ +#define CFG_OR0_PRELIM (CFG_FLASH_BASE | 0x0FF7) #define CFG_FLASH_CFI 1 #define CFG_FLASH_CFI_DRIVER 1 @@ -104,9 +108,9 @@ /* The configuration latch is Chip Select 1. * It's an 8-bit latch in the lower 8 bits of the word. */ -#define CFG_LBC_CFGLATCH_BASE 0xfb000000 /* Base of config latch */ -#define CFG_BR1_PRELIM 0xfb001801 /* 32-bit port */ -#define CFG_OR1_PRELIM 0xffff0ff7 /* 64K is enough */ +#define CFG_LBC_CFGLATCH_BASE 0xFB000000 /* Base of config latch */ +#define CFG_BR1_PRELIM 0xFB001801 /* 32-bit port */ +#define CFG_OR1_PRELIM 0xFFFF0FF7 /* 64K is enough */ #define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ @@ -300,17 +304,20 @@ /* Environment - default config is in flash, see below */ #if 0 /* in EEPROM */ -#define CFG_ENV_IS_IN_EEPROM 1 -#define CFG_ENV_OFFSET 0 -#define CFG_ENV_SIZE 2048 +# define CFG_ENV_IS_IN_EEPROM 1 +# define CFG_ENV_OFFSET 0 +# define CFG_ENV_SIZE 2048 #else /* in flash */ -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_SECT_SIZE 0x40000 - -#define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SECT_SIZE) -#define CFG_ENV_SIZE 0x4000 -#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR - CFG_ENV_SECT_SIZE) -#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +# define CFG_ENV_IS_IN_FLASH 1 +# ifdef CONFIG_STXSSA_4M +# define CFG_ENV_SECT_SIZE 0x20000 +# else /* default configuration - 64 MiB flash */ +# define CFG_ENV_SECT_SIZE 0x40000 +# endif +# define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SECT_SIZE) +# define CFG_ENV_SIZE 0x4000 +# define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR - CFG_ENV_SECT_SIZE) +# define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) #endif #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -- cgit v1.3.1 From cf959c7d6687567c308e366e9581e1a5aff5cc5b Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Fri, 1 Jun 2007 15:27:11 +0200 Subject: ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board This patch adds NAND booting support for the AMCC Bamboo eval board. Since the NAND-SPL boot image is limited to 4kbytes, this version only supports the onboard 64MBytes of DDR. The DIMM modules can't be supported, since the setup code for I2C DIMM autodetection and configuration is too big for this NAND bootloader. Signed-off-by: Stefan Roese --- MAKEALL | 30 ++--- Makefile | 10 ++ cpu/ppc4xx/start.S | 221 ++++++++++++++++++++-------------- include/configs/bamboo.h | 88 ++++++++++++-- nand_spl/board/amcc/bamboo/Makefile | 100 +++++++++++++++ nand_spl/board/amcc/bamboo/config.mk | 49 ++++++++ nand_spl/board/amcc/bamboo/sdram.c | 92 ++++++++++++++ nand_spl/board/amcc/bamboo/u-boot.lds | 65 ++++++++++ 8 files changed, 536 insertions(+), 119 deletions(-) create mode 100644 nand_spl/board/amcc/bamboo/Makefile create mode 100644 nand_spl/board/amcc/bamboo/config.mk create mode 100644 nand_spl/board/amcc/bamboo/sdram.c create mode 100644 nand_spl/board/amcc/bamboo/u-boot.lds (limited to 'Makefile') diff --git a/MAKEALL b/MAKEALL index 47f20307064..23402a298de 100755 --- a/MAKEALL +++ b/MAKEALL @@ -76,21 +76,21 @@ LIST_8xx=" \ LIST_4xx=" \ acadia ADCIOP alpr AP1000 \ - AR405 ASH405 bamboo bubinga \ - CANBT CMS700 CPCI2DP CPCI405 \ - CPCI4052 CPCI405AB CPCI405DT CPCI440 \ - CPCIISER4 CRAYL1 csb272 csb472 \ - DASA_SIM DP405 DU405 ebony \ - ERIC EXBITGEN G2000 HH405 \ - HUB405 JSE KAREF katmai \ - luan METROBOX MIP405 MIP405T \ - ML2 ml300 ocotea OCRTC \ - ORSG p3p440 PCI405 pcs440ep \ - PIP405 PLU405 PMC405 PPChameleonEVB \ - sbc405 sc3 sequoia sequoia_nand \ - taishan VOH405 VOM405 W7OLMC \ - W7OLMG walnut WUH405 XPEDITE1K \ - yellowstone yosemite yucca \ + AR405 ASH405 bamboo bamboo_nand \ + bubinga CANBT CMS700 CPCI2DP \ + CPCI405 CPCI4052 CPCI405AB CPCI405DT \ + CPCI440 CPCIISER4 CRAYL1 csb272 \ + csb472 DASA_SIM DP405 DU405 \ + ebony ERIC EXBITGEN G2000 \ + HH405 HUB405 JSE KAREF \ + katmai luan METROBOX MIP405 \ + MIP405T ML2 ml300 ocotea \ + OCRTC ORSG p3p440 PCI405 \ + pcs440ep PIP405 PLU405 PMC405 \ + PPChameleonEVB sbc405 sc3 sequoia \ + sequoia_nand taishan VOH405 VOM405 \ + W7OLMC W7OLMG walnut WUH405 \ + XPEDITE1K yellowstone yosemite yucca \ " ######################################################################### diff --git a/Makefile b/Makefile index 8e551eb555d..99f38afb6f7 100644 --- a/Makefile +++ b/Makefile @@ -1035,6 +1035,16 @@ ASH405_config: unconfig bamboo_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc +bamboo_nand_config: unconfig + @mkdir -p $(obj)include + @mkdir -p $(obj)nand_spl + @mkdir -p $(obj)board/amcc/bamboo + @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h + @echo "Compile NAND boot image for bamboo" + @$(MKCONFIG) -a bamboo ppc ppc4xx bamboo amcc + @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp + @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk + bubinga_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx bubinga amcc diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index 3b1586c0ae3..fe14ecd7bfe 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -110,6 +110,13 @@ # endif #endif /* CFG_INIT_DCACHE_CS */ +#define function_prolog(func_name) .text; \ + .align 2; \ + .globl func_name; \ + func_name: +#define function_epilog(func_name) .type func_name,@function; \ + .size func_name,.-func_name + /* We don't want the MMU yet. */ #undef MSR_KERNEL @@ -388,8 +395,9 @@ rsttlb: tlbwe r0,r1,0x0000 /* Invalidate all entries (V=0)*/ 2: #if defined(CONFIG_NAND_SPL) +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* - * Enable internal SRAM + * Enable internal SRAM (only on 440EPx/GRx, 440EP/GR have no OCM) */ lis r2,0x7fff ori r2,r2,0xffff @@ -399,6 +407,45 @@ rsttlb: tlbwe r0,r1,0x0000 /* Invalidate all entries (V=0)*/ mfdcr r1,isram0_pmeg and r1,r1,r2 /* Disable pwr mgmt */ mtdcr isram0_pmeg,r1 +#endif +#if defined(CONFIG_440EP) + /* + * On 440EP with no internal SRAM, we setup SDRAM very early + * and copy the NAND_SPL to SDRAM and jump to it + */ + /* Clear Dcache to use as RAM */ + addis r3,r0,CFG_INIT_RAM_ADDR@h + ori r3,r3,CFG_INIT_RAM_ADDR@l + addis r4,r0,CFG_INIT_RAM_END@h + ori r4,r4,CFG_INIT_RAM_END@l + rlwinm. r5,r4,0,27,31 + rlwinm r5,r4,27,5,31 + beq ..d_ran3 + addi r5,r5,0x0001 +..d_ran3: + mtctr r5 +..d_ag3: + dcbz r0,r3 + addi r3,r3,32 + bdnz ..d_ag3 + /*----------------------------------------------------------------*/ + /* Setup the stack in internal SRAM */ + /*----------------------------------------------------------------*/ + lis r1,CFG_INIT_RAM_ADDR@h + ori r1,r1,CFG_INIT_SP_OFFSET@l + li r0,0 + stwu r0,-4(r1) + stwu r0,-4(r1) /* Terminate call chain */ + + stwu r1,-8(r1) /* Save back chain and move SP */ + lis r0,RESET_VECTOR@h /* Address of reset vector */ + ori r0,r0, RESET_VECTOR@l + stwu r1,-8(r1) /* Save back chain and move SP */ + stw r0,+12(r1) /* Save return addr (underflow vect) */ + sync + bl early_sdram_init + sync +#endif /* CONFIG_440EP */ /* * Copy SPL from cache into internal SRAM @@ -429,7 +476,7 @@ spl_loop: start_ram: sync isync -#endif +#endif /* CONFIG_NAND_SPL */ bl 3f b _start @@ -1137,7 +1184,6 @@ crit_return: lwz r1,GPR1(r1) SYNC rfci -#endif /* CONFIG_NAND_SPL */ /* Cache functions. */ @@ -1254,24 +1300,6 @@ wr_tcr: mtspr tcr, r3 blr -/*------------------------------------------------------------------------------- */ -/* Function: in8 */ -/* Description: Input 8 bits */ -/*------------------------------------------------------------------------------- */ - .globl in8 -in8: - lbz r3,0x0000(r3) - blr - -/*------------------------------------------------------------------------------- */ -/* Function: out8 */ -/* Description: Output 8 bits */ -/*------------------------------------------------------------------------------- */ - .globl out8 -out8: - stb r4,0x0000(r3) - blr - /*------------------------------------------------------------------------------- */ /* Function: out16 */ /* Description: Output 16 bits */ @@ -1290,15 +1318,6 @@ out16r: sthbrx r4,r0,r3 blr -/*------------------------------------------------------------------------------- */ -/* Function: out32 */ -/* Description: Output 32 bits */ -/*------------------------------------------------------------------------------- */ - .globl out32 -out32: - stw r4,0x0000(r3) - blr - /*------------------------------------------------------------------------------- */ /* Function: out32r */ /* Description: Byte reverse and output 32 bits */ @@ -1326,15 +1345,6 @@ in16r: lhbrx r3,r0,r3 blr -/*------------------------------------------------------------------------------- */ -/* Function: in32 */ -/* Description: Input 32 bits */ -/*------------------------------------------------------------------------------- */ - .globl in32 -in32: - lwz 3,0x0000(3) - blr - /*------------------------------------------------------------------------------- */ /* Function: in32r */ /* Description: Input 32 bits and byte reverse */ @@ -1377,9 +1387,6 @@ ppcSync: sync blr -/*------------------------------------------------------------------------------*/ - -#ifndef CONFIG_NAND_SPL /* * void relocate_code (addr_sp, gd, addr_moni) * @@ -1644,8 +1651,88 @@ trap_reloc: stw r0, 4(r7) blr + +#if defined(CONFIG_440) +/*----------------------------------------------------------------------------+ +| dcbz_area. ++----------------------------------------------------------------------------*/ + function_prolog(dcbz_area) + rlwinm. r5,r4,0,27,31 + rlwinm r5,r4,27,5,31 + beq ..d_ra2 + addi r5,r5,0x0001 +..d_ra2:mtctr r5 +..d_ag2:dcbz r0,r3 + addi r3,r3,32 + bdnz ..d_ag2 + sync + blr + function_epilog(dcbz_area) + +/*----------------------------------------------------------------------------+ +| dflush. Assume 32K at vector address is cachable. ++----------------------------------------------------------------------------*/ + function_prolog(dflush) + mfmsr r9 + rlwinm r8,r9,0,15,13 + rlwinm r8,r8,0,17,15 + mtmsr r8 + addi r3,r0,0x0000 + mtspr dvlim,r3 + mfspr r3,ivpr + addi r4,r0,1024 + mtctr r4 +..dflush_loop: + lwz r6,0x0(r3) + addi r3,r3,32 + bdnz ..dflush_loop + addi r3,r3,-32 + mtctr r4 +..ag: dcbf r0,r3 + addi r3,r3,-32 + bdnz ..ag + sync + mtmsr r9 + blr + function_epilog(dflush) +#endif /* CONFIG_440 */ #endif /* CONFIG_NAND_SPL */ +/*------------------------------------------------------------------------------- */ +/* Function: in8 */ +/* Description: Input 8 bits */ +/*------------------------------------------------------------------------------- */ + .globl in8 +in8: + lbz r3,0x0000(r3) + blr + +/*------------------------------------------------------------------------------- */ +/* Function: out8 */ +/* Description: Output 8 bits */ +/*------------------------------------------------------------------------------- */ + .globl out8 +out8: + stb r4,0x0000(r3) + blr + +/*------------------------------------------------------------------------------- */ +/* Function: out32 */ +/* Description: Output 32 bits */ +/*------------------------------------------------------------------------------- */ + .globl out32 +out32: + stw r4,0x0000(r3) + blr + +/*------------------------------------------------------------------------------- */ +/* Function: in32 */ +/* Description: Input 32 bits */ +/*------------------------------------------------------------------------------- */ + .globl in32 +in32: + lwz 3,0x0000(3) + blr /**************************************************************************/ /* PPC405EP specific stuff */ @@ -1892,13 +1979,6 @@ pll_wait: #endif /* CONFIG_405EP */ #if defined(CONFIG_440) -#define function_prolog(func_name) .text; \ - .align 2; \ - .globl func_name; \ - func_name: -#define function_epilog(func_name) .type func_name,@function; \ - .size func_name,.-func_name - /*----------------------------------------------------------------------------+ | mttlb3. +----------------------------------------------------------------------------*/ @@ -1946,47 +2026,4 @@ pll_wait: TLBRE(3,3,0) blr function_epilog(mftlb1) - -/*----------------------------------------------------------------------------+ -| dcbz_area. -+----------------------------------------------------------------------------*/ - function_prolog(dcbz_area) - rlwinm. r5,r4,0,27,31 - rlwinm r5,r4,27,5,31 - beq ..d_ra2 - addi r5,r5,0x0001 -..d_ra2:mtctr r5 -..d_ag2:dcbz r0,r3 - addi r3,r3,32 - bdnz ..d_ag2 - sync - blr - function_epilog(dcbz_area) - -/*----------------------------------------------------------------------------+ -| dflush. Assume 32K at vector address is cachable. -+----------------------------------------------------------------------------*/ - function_prolog(dflush) - mfmsr r9 - rlwinm r8,r9,0,15,13 - rlwinm r8,r8,0,17,15 - mtmsr r8 - addi r3,r0,0x0000 - mtspr dvlim,r3 - mfspr r3,ivpr - addi r4,r0,1024 - mtctr r4 -..dflush_loop: - lwz r6,0x0(r3) - addi r3,r3,32 - bdnz ..dflush_loop - addi r3,r3,-32 - mtctr r4 -..ag: dcbf r0,r3 - addi r3,r3,-32 - bdnz ..ag - sync - mtmsr r9 - blr - function_epilog(dflush) #endif /* CONFIG_440 */ diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h index db58a9fa74a..763d1c7a8b4 100644 --- a/include/configs/bamboo.h +++ b/include/configs/bamboo.h @@ -50,7 +50,7 @@ *----------------------------------------------------------------------*/ #define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */ #define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */ -#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN) +#define CFG_MONITOR_BASE TEXT_BASE #define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ #define CFG_FLASH_BASE 0xfff00000 /* start of FLASH */ #define CFG_PCI_MEMBASE 0xa0000000 /* mapped pci memory*/ @@ -104,14 +104,11 @@ /*----------------------------------------------------------------------- * Environment *----------------------------------------------------------------------*/ -/* - * Define here the location of the environment variables (FLASH or EEPROM). - * Note: DENX encourages to use redundant environment in FLASH. - */ -#if 1 +#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ #else -#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ +#define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */ +#define CFG_ENV_IS_EMBEDDED 1 /* use embedded environment */ #endif /*----------------------------------------------------------------------- @@ -133,7 +130,7 @@ #ifdef CFG_ENV_IS_IN_FLASH #define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ -#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) +#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ /* Address and size of Redundant Environment Sector */ @@ -141,22 +138,89 @@ #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) #endif /* CFG_ENV_IS_IN_FLASH */ +/* + * IPL (Initial Program Loader, integrated inside CPU) + * Will load first 4k from NAND (SPL) into cache and execute it from there. + * + * SPL (Secondary Program Loader) + * Will load special U-Boot version (NUB) from NAND and execute it. This SPL + * has to fit into 4kByte. It sets up the CPU and configures the SDRAM + * controller and the NAND controller so that the special U-Boot image can be + * loaded from NAND to SDRAM. + * + * NUB (NAND U-Boot) + * This NAND U-Boot (NUB) is a special U-Boot version which can be started + * from RAM. Therefore it mustn't (re-)configure the SDRAM controller. + * + * On 440EPx the SPL is copied to SDRAM before the NAND controller is + * set up. While still running from cache, I experienced problems accessing + * the NAND controller. sr - 2006-08-25 + */ +#define CFG_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */ +#define CFG_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */ +#define CFG_NAND_BOOT_SPL_DST 0x00800000 /* Copy SPL here */ +#define CFG_NAND_U_BOOT_DST 0x01000000 /* Load NUB to this addr */ +#define CFG_NAND_U_BOOT_START CFG_NAND_U_BOOT_DST /* Start NUB from this addr */ +#define CFG_NAND_BOOT_SPL_DELTA (CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST) + +/* + * Define the partitioning of the NAND chip (only RAM U-Boot is needed here) + */ +#define CFG_NAND_U_BOOT_OFFS (16 << 10) /* Offset to RAM U-Boot image */ +#define CFG_NAND_U_BOOT_SIZE (384 << 10) /* Size of RAM U-Boot image */ + +/* + * Now the NAND chip has to be defined (no autodetection used!) + */ +#define CFG_NAND_PAGE_SIZE 512 /* NAND chip page size */ +#define CFG_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */ +#define CFG_NAND_PAGE_COUNT 32 /* NAND chip page count */ +#define CFG_NAND_BAD_BLOCK_POS 5 /* Location of bad block marker */ +#define CFG_NAND_4_ADDR_CYCLE 1 /* Fourth addr used (>32MB) */ + +#define CFG_NAND_ECCSIZE 256 +#define CFG_NAND_ECCBYTES 3 +#define CFG_NAND_ECCSTEPS (CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE) +#define CFG_NAND_OOBSIZE 16 +#define CFG_NAND_ECCTOTAL (CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS) +#define CFG_NAND_ECCPOS {0, 1, 2, 3, 6, 7} + +#ifdef CFG_ENV_IS_IN_NAND +/* + * For NAND booting the environment is embedded in the U-Boot image. Please take + * look at the file board/amcc/sequoia/u-boot-nand.lds for details. + */ +#define CFG_ENV_SIZE CFG_NAND_BLOCK_SIZE +#define CFG_ENV_OFFSET (CFG_NAND_U_BOOT_OFFS + CFG_ENV_SIZE) +#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET + CFG_ENV_SIZE) +#endif + /*----------------------------------------------------------------------- * NAND FLASH *----------------------------------------------------------------------*/ -#define CFG_MAX_NAND_DEVICE 1 -#define NAND_MAX_CHIPS 1 -#define CFG_NAND_CS 1 +#define CFG_MAX_NAND_DEVICE 2 +#define NAND_MAX_CHIPS CFG_MAX_NAND_DEVICE #define CFG_NAND_BASE (CFG_NAND_ADDR + CFG_NAND_CS) +#define CFG_NAND_BASE_LIST { CFG_NAND_BASE, CFG_NAND_ADDR + 2 } #define CFG_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */ +#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) +#define CFG_NAND_CS 1 +#else +#define CFG_NAND_CS 0 /* NAND chip connected to CSx */ +/* Memory Bank 0 (NAND-FLASH) initialization */ +#define CFG_EBC_PB0AP 0x018003c0 +#define CFG_EBC_PB0CR (CFG_NAND_ADDR | 0x1c000) +#endif + /*----------------------------------------------------------------------- * DDR SDRAM *----------------------------------------------------------------------------- */ #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */ #undef CONFIG_DDR_ECC /* don't use ECC */ #define CFG_SIMULATE_SPD_EEPROM 0xff /* simulate spd eeprom on this address */ -#define SPD_EEPROM_ADDRESS {CFG_SIMULATE_SPD_EEPROM, 0x50, 0x51} +#define SPD_EEPROM_ADDRESS {CFG_SIMULATE_SPD_EEPROM, 0x50, 0x51} +#define CFG_MBYTES_SDRAM (64) /* 64MB fixed size for early-sdram-init */ /*----------------------------------------------------------------------- * I2C diff --git a/nand_spl/board/amcc/bamboo/Makefile b/nand_spl/board/amcc/bamboo/Makefile new file mode 100644 index 00000000000..0df86f99d45 --- /dev/null +++ b/nand_spl/board/amcc/bamboo/Makefile @@ -0,0 +1,100 @@ +# +# (C) Copyright 2007 +# Stefan Roese, DENX Software Engineering, sr@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk +include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk + +LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds +LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS) +AFLAGS += -DCONFIG_NAND_SPL +CFLAGS += -DCONFIG_NAND_SPL + +SOBJS = start.o init.o resetvec.o +COBJS = nand_boot.o nand_ecc.o ndfc.o sdram.o + +SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c)) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +__OBJS := $(SOBJS) $(COBJS) +LNDIR := $(OBJTREE)/nand_spl/board/$(BOARDDIR) + +nandobj := $(OBJTREE)/nand_spl/ + +ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin + +all: $(obj).depend $(ALL) + +$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl + $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@ + +$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl + $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ + +$(nandobj)u-boot-spl: $(OBJS) + cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \ + -Map $(nandobj)u-boot-spl.map \ + -o $(nandobj)u-boot-spl + +# create symbolic links for common files + +# from cpu directory +$(obj)ndfc.c: + @rm -f $(obj)ndfc.c + ln -s $(SRCTREE)/cpu/ppc4xx/ndfc.c $(obj)ndfc.c + +$(obj)resetvec.S: + @rm -f $(obj)resetvec.S + ln -s $(SRCTREE)/cpu/ppc4xx/resetvec.S $(obj)resetvec.S + +$(obj)start.S: + @rm -f $(obj)start.S + ln -s $(SRCTREE)/cpu/ppc4xx/start.S $(obj)start.S + +# from board directory +$(obj)init.S: + @rm -f $(obj)init.S + ln -s $(SRCTREE)/board/amcc/bamboo/init.S $(obj)init.S + +# from nand_spl directory +$(obj)nand_boot.c: + @rm -f $(obj)nand_boot.c + ln -s $(SRCTREE)/nand_spl/nand_boot.c $(obj)nand_boot.c + +# from drivers/nand directory +$(obj)nand_ecc.c: + @rm -f $(obj)nand_ecc.c + ln -s $(SRCTREE)/drivers/nand/nand_ecc.c $(obj)nand_ecc.c + +######################################################################### + +$(obj)%.o: $(obj)%.S + $(CC) $(AFLAGS) -c -o $@ $< + +$(obj)%.o: $(obj)%.c + $(CC) $(CFLAGS) -c -o $@ $< + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/nand_spl/board/amcc/bamboo/config.mk b/nand_spl/board/amcc/bamboo/config.mk new file mode 100644 index 00000000000..f7ec7514f00 --- /dev/null +++ b/nand_spl/board/amcc/bamboo/config.mk @@ -0,0 +1,49 @@ +# +# (C) Copyright 2007 +# Stefan Roese, DENX Software Engineering, sr@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# +# AMCC 440EP Reference Platform (Bamboo) board +# + +# +# TEXT_BASE for SPL: +# +# On 440EP(x) platforms the SPL is located at 0xfffff000...0xffffffff, +# in the last 4kBytes of memory space in cache. +# We will copy this SPL into instruction-cache in start.S. So we set +# TEXT_BASE to starting address in i-cache here. +# +TEXT_BASE = 0x00800000 + +# PAD_TO used to generate a 16kByte binary needed for the combined image +# -> PAD_TO = TEXT_BASE + 0x4000 +PAD_TO = 0x00804000 + +PLATFORM_CPPFLAGS += -DCONFIG_440=1 + +ifeq ($(debug),1) +PLATFORM_CPPFLAGS += -DDEBUG +endif + +ifeq ($(dbcr),1) +PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000 +endif diff --git a/nand_spl/board/amcc/bamboo/sdram.c b/nand_spl/board/amcc/bamboo/sdram.c new file mode 100644 index 00000000000..4f09072df08 --- /dev/null +++ b/nand_spl/board/amcc/bamboo/sdram.c @@ -0,0 +1,92 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include + +static void wait_init_complete(void) +{ + u32 val; + + do { + mfsdram(mem_mcsts, val); + } while (!(val & 0x80000000)); +} + +/* + * early_sdram_init() + * + * As the name already indicates, this function is called very early + * from start.S and configures the SDRAM with fixed values. This is needed, + * since the 440EP has no internal SRAM and the 4kB NAND_SPL loader has + * not enough free space to implement the complete I2C SPD DDR autodetection + * routines. Therefore the Bamboo only supports the onboard 64MBytes of SDRAM + * when booting from NAND flash. + */ +void early_sdram_init(void) +{ + /* + * Soft-reset SDRAM controller. + */ + mtsdr(sdr_srst, SDR0_SRST_DMC); + mtsdr(sdr_srst, 0x00000000); + + /* + * Disable memory controller. + */ + mtsdram(mem_cfg0, 0x00000000); + + /* + * Setup some default + */ + mtsdram(mem_uabba, 0x00000000); /* ubba=0 (default) */ + mtsdram(mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */ + mtsdram(mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */ + mtsdram(mem_wddctr, 0x00000000); /* wrcp=0 dcd=0 */ + mtsdram(mem_clktr, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */ + + /* + * Following for CAS Latency = 2.5 @ 133 MHz PLB + */ + mtsdram(mem_b0cr, 0x00082001); + mtsdram(mem_tr0, 0x41094012); + mtsdram(mem_tr1, 0x8080083d); /* SS=T2 SL=STAGE 3 CD=1 CT=0x00*/ + mtsdram(mem_rtr, 0x04100000); /* Interval 7.8µs @ 133MHz PLB */ + mtsdram(mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM*/ + + /* + * Enable the controller, then wait for DCEN to complete + */ + mtsdram(mem_cfg0, 0x80000000); /* DCEN=1, PMUD=0*/ + wait_init_complete(); +} + +long int initdram(int board_type) +{ + /* + * Nothing to do here, just return size of fixed SDRAM setup + */ + return CFG_MBYTES_SDRAM << 20; +} diff --git a/nand_spl/board/amcc/bamboo/u-boot.lds b/nand_spl/board/amcc/bamboo/u-boot.lds new file mode 100644 index 00000000000..28228f84ddc --- /dev/null +++ b/nand_spl/board/amcc/bamboo/u-boot.lds @@ -0,0 +1,65 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc:common) +SECTIONS +{ + .resetvec 0x00800FFC : + { + *(.resetvec) + } = 0xffff + + .text : + { + start.o (.text) + init.o (.text) + nand_boot.o (.text) + sdram.o (.text) + ndfc.o (.text) + + *(.text) + *(.fixup) + } + _etext = .; + + .data : + { + *(.rodata*) + *(.data*) + *(.sdata*) + __got2_start = .; + *(.got2) + __got2_end = .; + } + + _edata = .; + + __bss_start = .; + .bss : + { + *(.sbss) + *(.bss) + } + + _end = . ; +} -- cgit v1.3.1 From 32922cdc470fdfd39bea0c1c4f582d3fb340421e Mon Sep 17 00:00:00 2001 From: Ed Swarthout Date: Tue, 5 Jun 2007 12:30:52 -0500 Subject: mpc8641 image size cleanup e600 does not have a bootpg restriction. Move the version string to beginning of image at fff00000. Resetvec.S is not needed. Update flash copy instructions. Add tftpflash env variable Signed-off-by: Ed Swarthout Signed-off-by: Jon Loeliger --- Makefile | 3 --- board/mpc8641hpcn/config.mk | 2 +- board/mpc8641hpcn/u-boot.lds | 22 ++++------------------ cpu/mpc86xx/resetvec.S | 2 -- doc/README.mpc8641hpcn | 11 +++++++---- include/configs/MPC8641HPCN.h | 10 +++++++++- 6 files changed, 21 insertions(+), 29 deletions(-) delete mode 100644 cpu/mpc86xx/resetvec.S (limited to 'Makefile') diff --git a/Makefile b/Makefile index 94cda54c731..df8c3cd66f4 100644 --- a/Makefile +++ b/Makefile @@ -173,9 +173,6 @@ endif ifeq ($(CPU),mpc85xx) OBJS += cpu/$(CPU)/resetvec.o endif -ifeq ($(CPU),mpc86xx) -OBJS += cpu/$(CPU)/resetvec.o -endif ifeq ($(CPU),bf533) OBJS += cpu/$(CPU)/start1.o cpu/$(CPU)/interrupt.o cpu/$(CPU)/cache.o OBJS += cpu/$(CPU)/flush.o cpu/$(CPU)/init_sdram.o diff --git a/board/mpc8641hpcn/config.mk b/board/mpc8641hpcn/config.mk index 989a40b015e..f778dcbe0c5 100644 --- a/board/mpc8641hpcn/config.mk +++ b/board/mpc8641hpcn/config.mk @@ -25,7 +25,7 @@ # default CCSRBAR is at 0xff700000 # assume U-Boot is less than 0.5MB # -TEXT_BASE = 0xfff01000 +TEXT_BASE = 0xfff00000 PLATFORM_CPPFLAGS += -DCONFIG_MPC86xx=1 PLATFORM_CPPFLAGS += -DCONFIG_MPC8641=1 -maltivec -mabi=altivec -msoft-float diff --git a/board/mpc8641hpcn/u-boot.lds b/board/mpc8641hpcn/u-boot.lds index 13c1acf803a..34b50e4be20 100644 --- a/board/mpc8641hpcn/u-boot.lds +++ b/board/mpc8641hpcn/u-boot.lds @@ -1,7 +1,5 @@ /* - * (C) Copyright 2004, Freescale, Inc. - * (C) Copyright 2002,2003, Motorola,Inc. - * Jeff Brown + * Copyright 2006, 2007 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -23,24 +21,11 @@ */ OUTPUT_ARCH(powerpc) -SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); -/* Do we need any of these for elf? - __DYNAMIC = 0; */ + SECTIONS { - .resetvec 0xFFF00100 : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFF70000 : - { - cpu/mpc86xx/start.o (.bootpg) - board/mpc8641hpcn/init.o (.bootpg) - } = 0xffff /* Read-only sections, merged into text segment: */ - . = + 1024; .interp : { *(.interp) } .hash : { *(.hash) } .dynsym : { *(.dynsym) } @@ -66,7 +51,7 @@ SECTIONS .text : { cpu/mpc86xx/start.o (.text) - board/mpc8641hpcn/init.o (.text) + board/mpc8641hpcn/init.o (.bootpg) cpu/mpc86xx/traps.o (.text) cpu/mpc86xx/interrupts.o (.text) cpu/mpc86xx/cpu_init.o (.text) @@ -88,6 +73,7 @@ SECTIONS *(.rodata) *(.rodata1) *(.rodata.str1.4) + *(.eh_frame) } .fini : { *(.fini) } =0 .ctors : { *(.ctors) } diff --git a/cpu/mpc86xx/resetvec.S b/cpu/mpc86xx/resetvec.S deleted file mode 100644 index 9a552f6624e..00000000000 --- a/cpu/mpc86xx/resetvec.S +++ /dev/null @@ -1,2 +0,0 @@ - .section .resetvec,"ax" - b _start diff --git a/doc/README.mpc8641hpcn b/doc/README.mpc8641hpcn index 3b88f8bc728..ac56ccaf23b 100644 --- a/doc/README.mpc8641hpcn +++ b/doc/README.mpc8641hpcn @@ -96,14 +96,17 @@ To Flash U-Boot into the booting bank (0xFFC00000 - 0xFFFFFFFF): tftp 1000000 u-boot.bin protect off all - erase fff00000 ffffffff - cp.b 1000000 fff00100 80000 + erase fff00000 +$filesize + cp.b 1000000 fff00000 $filesize + +or use tftpflash command: + run tftpflash To Flash U-boot into the alternative bank (0xFF800000 - 0xFFBFFFFF): tftp 1000000 u-boot.bin - erase ffb00000 ffbfffff - cp.b 1000000 ffb00100 80000 + erase ffb00000 +$filesize + cp.b 1000000 ffb00000 $filesize 4. Memory Map diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index bbe35053dd7..41daa2bfeaa 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -577,6 +577,7 @@ #define CONFIG_HOSTNAME unknown #define CONFIG_ROOTPATH /opt/nfsroot #define CONFIG_BOOTFILE uImage +#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ #define CONFIG_SERVERIP 192.168.1.1 #define CONFIG_GATEWAYIP 192.168.1.1 @@ -592,10 +593,17 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ + "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ + "tftpflash=tftpboot $loadaddr $uboot; " \ + "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ + "erase " MK_STR(TEXT_BASE) " +$filesize; " \ + "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ + "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ + "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ "consoledev=ttyS0\0" \ "ramdiskaddr=2000000\0" \ "ramdiskfile=your.ramdisk.u-boot\0" \ - "dtbaddr=400000\0" \ + "dtbaddr=c00000\0" \ "dtbfile=mpc8641_hpcn.dtb\0" \ "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \ "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \ -- cgit v1.3.1 From c440bfe6d6d92d66478a7e84402b31f48413617b Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Wed, 6 Jun 2007 11:42:13 +0200 Subject: ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board This patch adds NAND booting support for the AMCC Acadia eval board. Please make sure to configure jumper J7 to position 2-3 when booting from NOR, and to position 1-2 when booting for NAND. I also added a board command to configure the I2C bootstrap EEPROM values. Right now only 267MHz is support for booting either via NOR or NAND FLASH. Here the usage: => bootstrap 267 nor ;to configure the board for 267MHz NOR booting => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting Signed-off-by: Stefan Roese --- MAKEALL | 33 ++++---- Makefile | 9 ++ board/amcc/acadia/Makefile | 2 +- board/amcc/acadia/acadia.c | 10 ++- board/amcc/acadia/cmd_acadia.c | 101 ++++++++++++++++++++++ board/amcc/acadia/config.mk | 6 ++ board/amcc/acadia/memory.c | 11 ++- board/amcc/acadia/u-boot-nand.lds | 137 ++++++++++++++++++++++++++++++ cpu/ppc4xx/start.S | 72 ++++++++++++---- include/configs/acadia.h | 152 ++++++++++++++++++++++++++-------- include/ppc405.h | 8 ++ nand_spl/board/amcc/acadia/Makefile | 104 +++++++++++++++++++++++ nand_spl/board/amcc/acadia/config.mk | 47 +++++++++++ nand_spl/board/amcc/acadia/u-boot.lds | 63 ++++++++++++++ 14 files changed, 685 insertions(+), 70 deletions(-) create mode 100644 board/amcc/acadia/cmd_acadia.c create mode 100644 board/amcc/acadia/u-boot-nand.lds create mode 100644 nand_spl/board/amcc/acadia/Makefile create mode 100644 nand_spl/board/amcc/acadia/config.mk create mode 100644 nand_spl/board/amcc/acadia/u-boot.lds (limited to 'Makefile') diff --git a/MAKEALL b/MAKEALL index 81f5dfcb058..67d39a716fb 100755 --- a/MAKEALL +++ b/MAKEALL @@ -75,22 +75,23 @@ LIST_8xx=" \ ######################################################################### LIST_4xx=" \ - acadia ADCIOP alpr AP1000 \ - AR405 ASH405 bamboo bamboo_nand \ - bubinga CANBT CMS700 CPCI2DP \ - CPCI405 CPCI4052 CPCI405AB CPCI405DT \ - CPCI440 CPCIISER4 CRAYL1 csb272 \ - csb472 DASA_SIM DP405 DU405 \ - ebony ERIC EXBITGEN G2000 \ - HH405 HUB405 JSE KAREF \ - katmai luan METROBOX MIP405 \ - MIP405T ML2 ml300 ocotea \ - OCRTC ORSG p3p440 PCI405 \ - pcs440ep PIP405 PLU405 PMC405 \ - PPChameleonEVB sbc405 sc3 sequoia \ - sequoia_nand taishan VOH405 VOM405 \ - W7OLMC W7OLMG walnut WUH405 \ - XPEDITE1K yellowstone yosemite yucca \ + acadia acadia_nand ADCIOP alpr \ + AP1000 AR405 ASH405 bamboo \ + bamboo_nand bubinga CANBT CMS700 \ + CPCI2DP CPCI405 CPCI4052 CPCI405AB \ + CPCI405DT CPCI440 CPCIISER4 CRAYL1 \ + csb272 csb472 DASA_SIM DP405 \ + DU405 ebony ERIC EXBITGEN \ + G2000 HH405 HUB405 JSE \ + KAREF katmai luan METROBOX \ + MIP405 MIP405T ML2 ml300 \ + ocotea OCRTC ORSG p3p440 \ + PCI405 pcs440ep PIP405 PLU405 \ + PMC405 PPChameleonEVB sbc405 sc3 \ + sequoia sequoia_nand taishan VOH405 \ + VOM405 W7OLMC W7OLMG walnut \ + WUH405 XPEDITE1K yellowstone yosemite \ + yucca \ " ######################################################################### diff --git a/Makefile b/Makefile index 463757c43b2..6b70dd53b26 100644 --- a/Makefile +++ b/Makefile @@ -1017,6 +1017,15 @@ xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$( acadia_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amcc +acadia_nand_config: unconfig + @mkdir -p $(obj)include + @mkdir -p $(obj)nand_spl + @mkdir -p $(obj)board/amcc/acadia + @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h + @$(MKCONFIG) -n $@ -a acadia ppc ppc4xx acadia amcc + @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp + @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk + ADCIOP_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd diff --git a/board/amcc/acadia/Makefile b/board/amcc/acadia/Makefile index abcbf3e439c..ddbcb8091f7 100644 --- a/board/amcc/acadia/Makefile +++ b/board/amcc/acadia/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o cpr.o memory.o +COBJS = $(BOARD).o cmd_acadia.o cpr.o memory.o SOBJS = SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/board/amcc/acadia/acadia.c b/board/amcc/acadia/acadia.c index 3b63c8a741d..46d63e6308b 100644 --- a/board/amcc/acadia/acadia.c +++ b/board/amcc/acadia/acadia.c @@ -63,8 +63,14 @@ int board_early_init_f(void) acadia_gpio_init(); /* Configure 405EZ for NAND usage */ - mtsdr(sdrnand0, 0x80c00000); - mtsdr(sdrultra0, 0x8d110000); + mtsdr(sdrnand0, SDR_NAND0_NDEN | SDR_NAND0_NDAREN | SDR_NAND0_NDRBEN); + mfsdr(sdrultra0, reg); + reg &= ~SDR_ULTRA0_CSN_MASK; + reg |= (SDR_ULTRA0_CSNSEL0 >> CFG_NAND_CS) | + SDR_ULTRA0_NDGPIOBP | + SDR_ULTRA0_EBCRDYEN | + SDR_ULTRA0_NFSRSTEN; + mtsdr(sdrultra0, reg); /* USB Host core needs this bit set */ mfsdr(sdrultra1, reg); diff --git a/board/amcc/acadia/cmd_acadia.c b/board/amcc/acadia/cmd_acadia.c new file mode 100644 index 00000000000..fb7ea359545 --- /dev/null +++ b/board/amcc/acadia/cmd_acadia.c @@ -0,0 +1,101 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include +#include +#include + +static u8 boot_267_nor[] = { + 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x8e, 0x00, + 0x14, 0xc0, 0x36, 0xcc, 0x00, 0x0c, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00 +}; + +static u8 boot_267_nand[] = { + 0xd0, 0x38, 0xc3, 0x50, 0x13, 0x88, 0x8e, 0x00, + 0x14, 0xc0, 0x36, 0xcc, 0x00, 0x0c, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00 +}; + +static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + u8 chip; + u8 *buf; + int cpu_freq; + + if (argc < 3) { + printf("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + cpu_freq = simple_strtol(argv[1], NULL, 10); + if (cpu_freq != 267) { + printf("Unsupported cpu-frequency - only 267 supported\n"); + return 1; + } + + /* use 0x50 as I2C EEPROM address for now */ + chip = 0x50; + + if ((strcmp(argv[2], "nor") != 0) && + (strcmp(argv[2], "nand") != 0)) { + printf("Unsupported boot-device - only nor|nand support\n"); + return 1; + } + + if (strcmp(argv[2], "nand") == 0) { + switch (cpu_freq) { + case 267: + buf = boot_267_nand; + break; + default: + break; + } + } else { + switch (cpu_freq) { + case 267: + buf = boot_267_nor; + break; + default: + break; + } + } + + if (i2c_write(chip, 0, 1, buf, 16) != 0) + printf("Error writing to EEPROM at address 0x%x\n", chip); + udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000); + if (i2c_write(chip, 0x10, 1, buf+16, 4) != 0) + printf("Error2 writing to EEPROM at address 0x%x\n", chip); + + printf("Done\n"); + printf("Please power-cycle the board for the changes to take effect\n"); + + return 0; +} + +U_BOOT_CMD( + bootstrap, 3, 0, do_bootstrap, + "bootstrap - program the I2C bootstrap EEPROM\n", + " - program the I2C bootstrap EEPROM\n" + ); diff --git a/board/amcc/acadia/config.mk b/board/amcc/acadia/config.mk index c8566ecc7b6..af5a46c2a5d 100644 --- a/board/amcc/acadia/config.mk +++ b/board/amcc/acadia/config.mk @@ -21,6 +21,12 @@ # MA 02111-1307 USA # +# +# AMCC 405EZ Reference Platform (Acadia) board +# + +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp + ifndef TEXT_BASE TEXT_BASE = 0xFFFC0000 endif diff --git a/board/amcc/acadia/memory.c b/board/amcc/acadia/memory.c index 5375d36c9b5..25904d3b94a 100644 --- a/board/amcc/acadia/memory.c +++ b/board/amcc/acadia/memory.c @@ -39,6 +39,7 @@ void sdram_init(void) return; } +#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) static void cram_bcr_write(u32 wr_val) { wr_val <<= 2; @@ -62,9 +63,12 @@ static void cram_bcr_write(u32 wr_val) return; } +#endif long int initdram(int board_type) { +#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) + int i; u32 val; /* 1. EBC need to program READY, CLK, ADV for ASync mode */ @@ -92,7 +96,12 @@ long int initdram(int board_type) /* Config EBC to use RDY */ mfsdr(sdrultra0, val); - mtsdr(sdrultra0, val | 0x04000000); + mtsdr(sdrultra0, val | SDR_ULTRA0_EBCRDYEN); + + /* Wait a short while, since for NAND booting this is too fast */ + for (i=0; i<200000; i++) + ; +#endif return (CFG_MBYTES_RAM << 20); } diff --git a/board/amcc/acadia/u-boot-nand.lds b/board/amcc/acadia/u-boot-nand.lds new file mode 100644 index 00000000000..a5dae0e98cc --- /dev/null +++ b/board/amcc/acadia/u-boot-nand.lds @@ -0,0 +1,137 @@ +/* + * (C) Copyright 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/ppc4xx/start.o (.text) + + /* Align to next NAND block */ + . = ALIGN(0x4000); + common/environment.o (.ppcenv) + /* Keep some space here for redundant env and potential bad env blocks */ + . = ALIGN(0x10000); + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + + _end = . ; + PROVIDE (end = .); +} diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index 78de30031d7..78d0042cc76 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -155,7 +155,9 @@ * NAND U-Boot image is started from offset 0 */ .text +#if defined(CONFIG_440) bl reconfig_tlb0 +#endif GET_GOT bl cpu_init_f /* run low-level CPU init code (from Flash) */ bl board_init_f @@ -857,6 +859,38 @@ _start: #endif /* CONFIG_405EZ */ #endif +#ifdef CONFIG_NAND_SPL + /* + * Copy SPL from cache into internal SRAM + */ + li r4,(CFG_NAND_BOOT_SPL_SIZE >> 2) - 1 + mtctr r4 + lis r2,CFG_NAND_BOOT_SPL_SRC@h + ori r2,r2,CFG_NAND_BOOT_SPL_SRC@l + lis r3,CFG_NAND_BOOT_SPL_DST@h + ori r3,r3,CFG_NAND_BOOT_SPL_DST@l +spl_loop: + lwzu r4,4(r2) + stwu r4,4(r3) + bdnz spl_loop + + /* + * Jump to code in RAM + */ + bl 00f +00: mflr r10 + lis r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@h + ori r3,r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@l + sub r10,r10,r3 + addi r10,r10,28 + mtlr r10 + blr + +start_ram: + sync + isync +#endif /* CONFIG_NAND_SPL */ + /*----------------------------------------------------------------------- */ /* Setup temporary stack in DCACHE or OCM if needed for SDRAM SPD. */ /*----------------------------------------------------------------------- */ @@ -967,12 +1001,16 @@ _start: stw r0, +12(r1) /* Save return addr (underflow vect) */ #endif /* !(CFG_INIT_DCACHE_CS || !CFG_TEM_STACK_OCM) */ +#ifdef CONFIG_NAND_SPL + bl nand_boot /* will not return */ +#else GET_GOT /* initialize GOT access */ bl cpu_init_f /* run low-level CPU init code (from Flash) */ /* NEVER RETURNS! */ bl board_init_f /* run first part of init code (from Flash) */ +#endif /* CONFIG_NAND_SPL */ #endif /* CONFIG_405GP || CONFIG_405CR || CONFIG_405 || CONFIG_405EP */ /*----------------------------------------------------------------------- */ @@ -1187,23 +1225,6 @@ crit_return: /* Cache functions. */ -invalidate_icache: - iccci r0,r0 /* for 405, iccci invalidates the */ - blr /* entire I cache */ - -invalidate_dcache: - addi r6,0,0x0000 /* clear GPR 6 */ - /* Do loop for # of dcache congruence classes. */ - lis r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@ha /* TBS for large sized cache */ - ori r7, r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@l - /* NOTE: dccci invalidates both */ - mtctr r7 /* ways in the D cache */ -..dcloop: - dccci 0,r6 /* invalidate line */ - addi r6,r6, CFG_CACHELINE_SIZE /* bump to next line */ - bdnz ..dcloop - blr - flush_dcache: addis r9,r0,0x0002 /* set mask for EE and CE msr bits */ ori r9,r9,0x8000 @@ -1734,6 +1755,23 @@ in32: lwz 3,0x0000(3) blr +invalidate_icache: + iccci r0,r0 /* for 405, iccci invalidates the */ + blr /* entire I cache */ + +invalidate_dcache: + addi r6,0,0x0000 /* clear GPR 6 */ + /* Do loop for # of dcache congruence classes. */ + lis r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@ha /* TBS for large sized cache */ + ori r7, r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@l + /* NOTE: dccci invalidates both */ + mtctr r7 /* ways in the D cache */ +..dcloop: + dccci 0,r6 /* invalidate line */ + addi r6,r6, CFG_CACHELINE_SIZE /* bump to next line */ + bdnz ..dcloop + blr + /**************************************************************************/ /* PPC405EP specific stuff */ /**************************************************************************/ diff --git a/include/configs/acadia.h b/include/configs/acadia.h index c72d9339e6b..0f447b004a0 100644 --- a/include/configs/acadia.h +++ b/include/configs/acadia.h @@ -109,6 +109,7 @@ /*----------------------------------------------------------------------- * FLASH related *----------------------------------------------------------------------*/ +#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #define CFG_FLASH_CFI /* The flash is CFI compatible */ #define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ @@ -122,6 +123,12 @@ #define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#define _CFG_CMD_INCLUDE (CFG_CMD_ALL) +#else +#define CFG_NO_FLASH 1 /* No NOR on Acadia when NAND-booting */ +#define _CFG_CMD_INCLUDE ((CFG_CMD_ALL) & ~(CFG_CMD_FLASH | CFG_CMD_IMLS)) +#endif + #ifdef CFG_ENV_IS_IN_FLASH #define CFG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) @@ -132,6 +139,63 @@ #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) #endif +/* + * IPL (Initial Program Loader, integrated inside CPU) + * Will load first 4k from NAND (SPL) into cache and execute it from there. + * + * SPL (Secondary Program Loader) + * Will load special U-Boot version (NUB) from NAND and execute it. This SPL + * has to fit into 4kByte. It sets up the CPU and configures the SDRAM + * controller and the NAND controller so that the special U-Boot image can be + * loaded from NAND to SDRAM. + * + * NUB (NAND U-Boot) + * This NAND U-Boot (NUB) is a special U-Boot version which can be started + * from RAM. Therefore it mustn't (re-)configure the SDRAM controller. + * + * On 440EPx the SPL is copied to SDRAM before the NAND controller is + * set up. While still running from cache, I experienced problems accessing + * the NAND controller. sr - 2006-08-25 + */ +#define CFG_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */ +#define CFG_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */ +#define CFG_NAND_BOOT_SPL_DST (CFG_OCM_DATA_ADDR + (12 << 10)) /* Copy SPL here*/ +#define CFG_NAND_U_BOOT_DST 0x01000000 /* Load NUB to this addr */ +#define CFG_NAND_U_BOOT_START CFG_NAND_U_BOOT_DST /* Start NUB from this addr */ +#define CFG_NAND_BOOT_SPL_DELTA (CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST) + +/* + * Define the partitioning of the NAND chip (only RAM U-Boot is needed here) + */ +#define CFG_NAND_U_BOOT_OFFS (16 << 10) /* Offset to RAM U-Boot image */ +#define CFG_NAND_U_BOOT_SIZE (384 << 10) /* Size of RAM U-Boot image */ + +/* + * Now the NAND chip has to be defined (no autodetection used!) + */ +#define CFG_NAND_PAGE_SIZE 512 /* NAND chip page size */ +#define CFG_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */ +#define CFG_NAND_PAGE_COUNT 32 /* NAND chip page count */ +#define CFG_NAND_BAD_BLOCK_POS 5 /* Location of bad block marker */ +#undef CFG_NAND_4_ADDR_CYCLE /* No fourth addr used (<=32MB) */ + +#define CFG_NAND_ECCSIZE 256 +#define CFG_NAND_ECCBYTES 3 +#define CFG_NAND_ECCSTEPS (CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE) +#define CFG_NAND_OOBSIZE 16 +#define CFG_NAND_ECCTOTAL (CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS) +#define CFG_NAND_ECCPOS {0, 1, 2, 3, 6, 7} + +#ifdef CFG_ENV_IS_IN_NAND +/* + * For NAND booting the environment is embedded in the U-Boot image. Please take + * look at the file board/amcc/sequoia/u-boot-nand.lds for details. + */ +#define CFG_ENV_SIZE CFG_NAND_BLOCK_SIZE +#define CFG_ENV_OFFSET (CFG_NAND_U_BOOT_OFFS + CFG_ENV_SIZE) +#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET + CFG_ENV_SIZE) +#endif + /*----------------------------------------------------------------------- * RAM (CRAM) *----------------------------------------------------------------------*/ @@ -209,7 +273,11 @@ "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \ "cp.b ${fileaddr} fffc0000 ${filesize};" \ "setenv filesize;saveenv\0" \ - "upd=run load;run update\0" \ + "upd=run load update\0" \ + "nload=tftp 200000 acadia/u-boot-nand.bin\0" \ + "nupdate=nand erase 0 60000;nand write 200000 0 60000;" \ + "setenv filesize;saveenv\0" \ + "nupd=run nload nupdate\0" \ "kozio=bootm ffc60000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" @@ -233,24 +301,24 @@ #define CONFIG_SUPPORT_VFAT -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_DTT | \ - CFG_CMD_DIAG | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_FAT | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NAND | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_USB) +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL & _CFG_CMD_INCLUDE) | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DHCP | \ + CFG_CMD_DTT | \ + CFG_CMD_DIAG | \ + CFG_CMD_EEPROM | \ + CFG_CMD_ELF | \ + CFG_CMD_FAT | \ + CFG_CMD_I2C | \ + CFG_CMD_IRQ | \ + CFG_CMD_MII | \ + CFG_CMD_NAND | \ + CFG_CMD_NET | \ + CFG_CMD_NFS | \ + CFG_CMD_PCI | \ + CFG_CMD_PING | \ + CFG_CMD_REGINFO | \ + CFG_CMD_USB) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include @@ -312,12 +380,16 @@ /*----------------------------------------------------------------------- * External Bus Controller (EBC) Setup *----------------------------------------------------------------------*/ -#define CFG_NAND_CS 3 /* NAND chip connected to CSx */ - +#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) +#define CFG_NAND_CS 3 /* Memory Bank 0 (Flash) initialization */ #define CFG_EBC_PB0AP 0x03337200 #define CFG_EBC_PB0CR 0xfe0bc000 +/* Memory Bank 3 (NAND-FLASH) initialization */ +#define CFG_EBC_PB3AP 0x018003c0 +#define CFG_EBC_PB3CR (CFG_NAND_ADDR | 0x1c000) + /* Just initial configuration for CRAM. Will be changed in memory.c to sync mode*/ /* Memory Bank 1 (CRAM) initialization */ #define CFG_EBC_PB1AP 0x030400c0 @@ -326,10 +398,24 @@ /* Memory Bank 2 (CRAM) initialization */ #define CFG_EBC_PB2AP 0x030400c0 #define CFG_EBC_PB2CR 0x020bc000 +#else +#define CFG_NAND_CS 0 /* NAND chip connected to CSx */ +/* Memory Bank 0 (NAND-FLASH) initialization */ +#define CFG_EBC_PB0AP 0x018003c0 +#define CFG_EBC_PB0CR (CFG_NAND_ADDR | 0x1c000) -/* Memory Bank 3 (NAND-FLASH) initialization */ -#define CFG_EBC_PB3AP 0x018003c0 -#define CFG_EBC_PB3CR (CFG_NAND_ADDR | 0x1c000) +/* + * When NAND-booting the CRAM EBC setup must be done in sync mode, since the + * NAND-SPL already initialized the CRAM and EBC to sync mode. + */ +/* Memory Bank 1 (CRAM) initialization */ +#define CFG_EBC_PB1AP 0x9C0201C0 +#define CFG_EBC_PB1CR 0x000bc000 + +/* Memory Bank 2 (CRAM) initialization */ +#define CFG_EBC_PB2AP 0x9C0201C0 +#define CFG_EBC_PB2CR 0x020bc000 +#endif /* Memory Bank 4 (CPLD) initialization */ #define CFG_EBC_PB4AP 0x04006000 @@ -341,9 +427,9 @@ * GPIO Setup *----------------------------------------------------------------------*/ #define CFG_GPIO_CRAM_CLK 8 -#define CFG_GPIO_CRAM_WAIT 9 +#define CFG_GPIO_CRAM_WAIT 9 /* GPIO-In */ #define CFG_GPIO_CRAM_ADV 10 -#define CFG_GPIO_CRAM_CRE (32 + 21) +#define CFG_GPIO_CRAM_CRE (32 + 21) /* GPIO-Out */ /*----------------------------------------------------------------------- * Definitions for GPIO_0 setup (PPC405EZ specific) @@ -365,10 +451,10 @@ * GPIO0[28-30] - Trace Outputs / PWM Inputs * GPIO0[31] - PWM_8 I/O */ -#define CFG_GPIO0_TCR 0xC0000000 -#define CFG_GPIO0_OSRL 0x50000000 +#define CFG_GPIO0_TCR 0xC0A00000 +#define CFG_GPIO0_OSRL 0x50004400 #define CFG_GPIO0_OSRH 0x02000055 -#define CFG_GPIO0_ISR1L 0x00000000 +#define CFG_GPIO0_ISR1L 0x00001000 #define CFG_GPIO0_ISR1H 0x00000055 #define CFG_GPIO0_TSRL 0x02000000 #define CFG_GPIO0_TSRH 0x00000055 @@ -387,13 +473,13 @@ * GPIO1[16] - SPI_SS_1_N Output * GPIO1[17-20] - Trace Output/External Interrupts IRQ0 - IRQ3 inputs */ -#define CFG_GPIO1_OSRH 0x55455555 +#define CFG_GPIO1_TCR 0xFFFF8414 #define CFG_GPIO1_OSRL 0x40000110 -#define CFG_GPIO1_ISR1H 0x00000000 +#define CFG_GPIO1_OSRH 0x55455555 #define CFG_GPIO1_ISR1L 0x15555445 -#define CFG_GPIO1_TSRH 0x00000000 +#define CFG_GPIO1_ISR1H 0x00000000 #define CFG_GPIO1_TSRL 0x00000000 -#define CFG_GPIO1_TCR 0xFFFF8014 +#define CFG_GPIO1_TSRH 0x00000000 /* * Internal Definitions diff --git a/include/ppc405.h b/include/ppc405.h index fffae4dd16a..71ad12e5159 100644 --- a/include/ppc405.h +++ b/include/ppc405.h @@ -556,6 +556,11 @@ #define sdricintstat 0x4510 #define SDR_NAND0_NDEN 0x80000000 +#define SDR_NAND0_NDBTEN 0x40000000 +#define SDR_NAND0_NDBADR_MASK 0x30000000 +#define SDR_NAND0_NDBPG_MASK 0x0f000000 +#define SDR_NAND0_NDAREN 0x00800000 +#define SDR_NAND0_NDRBEN 0x00400000 #define SDR_ULTRA0_NDGPIOBP 0x80000000 #define SDR_ULTRA0_CSN_MASK 0x78000000 @@ -563,6 +568,9 @@ #define SDR_ULTRA0_CSNSEL1 0x20000000 #define SDR_ULTRA0_CSNSEL2 0x10000000 #define SDR_ULTRA0_CSNSEL3 0x08000000 +#define SDR_ULTRA0_EBCRDYEN 0x04000000 +#define SDR_ULTRA0_SPISSINEN 0x02000000 +#define SDR_ULTRA0_NFSRSTEN 0x01000000 #define SDR_ULTRA1_LEDNENABLE 0x40000000 diff --git a/nand_spl/board/amcc/acadia/Makefile b/nand_spl/board/amcc/acadia/Makefile new file mode 100644 index 00000000000..0d6828a76fb --- /dev/null +++ b/nand_spl/board/amcc/acadia/Makefile @@ -0,0 +1,104 @@ +# +# (C) Copyright 2007 +# Stefan Roese, DENX Software Engineering, sr@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk +include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk + +LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds +LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS) +AFLAGS += -DCONFIG_NAND_SPL +CFLAGS += -DCONFIG_NAND_SPL + +SOBJS = start.o resetvec.o +COBJS = gpio.o nand_boot.o nand_ecc.o memory.o ndfc.o + +SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c)) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +__OBJS := $(SOBJS) $(COBJS) +LNDIR := $(OBJTREE)/nand_spl/board/$(BOARDDIR) + +nandobj := $(OBJTREE)/nand_spl/ + +ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin + +all: $(obj).depend $(ALL) + +$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl + $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@ + +$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl + $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ + +$(nandobj)u-boot-spl: $(OBJS) + cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \ + -Map $(nandobj)u-boot-spl.map \ + -o $(nandobj)u-boot-spl + +# create symbolic links for common files + +# from cpu directory +$(obj)gpio.c: + @rm -f $(obj)gpio.c + ln -s $(SRCTREE)/cpu/ppc4xx/gpio.c $(obj)gpio.c + +$(obj)ndfc.c: + @rm -f $(obj)ndfc.c + ln -s $(SRCTREE)/cpu/ppc4xx/ndfc.c $(obj)ndfc.c + +$(obj)resetvec.S: + @rm -f $(obj)resetvec.S + ln -s $(SRCTREE)/cpu/ppc4xx/resetvec.S $(obj)resetvec.S + +$(obj)start.S: + @rm -f $(obj)start.S + ln -s $(SRCTREE)/cpu/ppc4xx/start.S $(obj)start.S + +# from board directory +$(obj)memory.c: + @rm -f $(obj)memory.c + ln -s $(SRCTREE)/board/amcc/acadia/memory.c $(obj)memory.c + +# from nand_spl directory +$(obj)nand_boot.c: + @rm -f $(obj)nand_boot.c + ln -s $(SRCTREE)/nand_spl/nand_boot.c $(obj)nand_boot.c + +# from drivers/nand directory +$(obj)nand_ecc.c: + @rm -f $(obj)nand_ecc.c + ln -s $(SRCTREE)/drivers/nand/nand_ecc.c $(obj)nand_ecc.c + +######################################################################### + +$(obj)%.o: $(obj)%.S + $(CC) $(AFLAGS) -c -o $@ $< + +$(obj)%.o: $(obj)%.c + $(CC) $(CFLAGS) -c -o $@ $< + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/nand_spl/board/amcc/acadia/config.mk b/nand_spl/board/amcc/acadia/config.mk new file mode 100644 index 00000000000..55069b4dfea --- /dev/null +++ b/nand_spl/board/amcc/acadia/config.mk @@ -0,0 +1,47 @@ +# +# (C) Copyright 2007 +# Stefan Roese, DENX Software Engineering, sr@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# +# AMCC 405EZ Reference Platform (Acadia) board +# + +# +# TEXT_BASE for SPL: +# +# On 4xx platforms the SPL is located at 0xfffff000...0xffffffff, +# in the last 4kBytes of memory space in cache. +# We will copy this SPL into internal SRAM in start.S. So we set +# TEXT_BASE to starting address in internal SRAM here. +# +TEXT_BASE = 0xF8003000 + +# PAD_TO used to generate a 16kByte binary needed for the combined image +# -> PAD_TO = TEXT_BASE + 0x4000 +PAD_TO = 0xF8007000 + +ifeq ($(debug),1) +PLATFORM_CPPFLAGS += -DDEBUG +endif + +ifeq ($(dbcr),1) +PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000 +endif diff --git a/nand_spl/board/amcc/acadia/u-boot.lds b/nand_spl/board/amcc/acadia/u-boot.lds new file mode 100644 index 00000000000..018def1faba --- /dev/null +++ b/nand_spl/board/amcc/acadia/u-boot.lds @@ -0,0 +1,63 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc:common) +SECTIONS +{ + .resetvec 0xF8003FFC : + { + *(.resetvec) + } = 0xffff + + .text : + { + start.o (.text) + nand_boot.o (.text) + ndfc.o (.text) + + *(.text) + *(.fixup) + } + _etext = .; + + .data : + { + *(.rodata*) + *(.data*) + *(.sdata*) + __got2_start = .; + *(.got2) + __got2_end = .; + } + + _edata = .; + + __bss_start = .; + .bss : + { + *(.sbss) + *(.bss) + } + + _end = . ; +} -- cgit v1.3.1 From b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Fri, 15 Jun 2007 08:18:01 +0200 Subject: [ppc4xx] Add initial lwmon5 board support This patch adds initial support for the Liebherr lwmon5 board euqipped with an AMCC 440EPx PowerPC. Signed-off-by: Stefan Roese --- MAINTAINERS | 1 + MAKEALL | 18 +- Makefile | 3 + board/lwmon5/Makefile | 51 ++++ board/lwmon5/config.mk | 39 ++++ board/lwmon5/init.S | 90 +++++++ board/lwmon5/lwmon5.c | 464 ++++++++++++++++++++++++++++++++++++ board/lwmon5/sdram.c | 598 +++++++++++++++++++++++++++++++++++++++++++++++ board/lwmon5/sdram.h | 505 +++++++++++++++++++++++++++++++++++++++ board/lwmon5/u-boot.lds | 145 ++++++++++++ include/configs/lwmon5.h | 437 ++++++++++++++++++++++++++++++++++ include/ppc440.h | 5 +- 12 files changed, 2346 insertions(+), 10 deletions(-) create mode 100644 board/lwmon5/Makefile create mode 100644 board/lwmon5/config.mk create mode 100644 board/lwmon5/init.S create mode 100644 board/lwmon5/lwmon5.c create mode 100644 board/lwmon5/sdram.c create mode 100644 board/lwmon5/sdram.h create mode 100644 board/lwmon5/u-boot.lds create mode 100644 include/configs/lwmon5.h (limited to 'Makefile') diff --git a/MAINTAINERS b/MAINTAINERS index 2eaef1784ea..693b1157290 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -282,6 +282,7 @@ Stefan Roese bunbinga PPC405EP ebony PPC440GP katmai PPC440SPe + lwmon5 PPC440EPx ocotea PPC440GX p3p440 PPC440GP pcs440ep PPC440EP diff --git a/MAKEALL b/MAKEALL index 0e4e7440937..a9969a38506 100755 --- a/MAKEALL +++ b/MAKEALL @@ -83,15 +83,15 @@ LIST_4xx=" \ csb272 csb472 DASA_SIM DP405 \ DU405 ebony ERIC EXBITGEN \ G2000 HH405 HUB405 JSE \ - KAREF katmai luan METROBOX \ - MIP405 MIP405T ML2 ml300 \ - ocotea OCRTC ORSG p3p440 \ - PCI405 pcs440ep PIP405 PLU405 \ - PMC405 PPChameleonEVB sbc405 sc3 \ - sequoia sequoia_nand taishan VOH405 \ - VOM405 W7OLMC W7OLMG walnut \ - WUH405 XPEDITE1K yellowstone yosemite \ - yucca \ + KAREF katmai luan lwmon5 \ + METROBOX MIP405 MIP405T ML2 \ + ml300 ocotea OCRTC ORSG \ + p3p440 PCI405 pcs440ep PIP405 \ + PLU405 PMC405 PPChameleonEVB sbc405 \ + sc3 sequoia sequoia_nand taishan \ + VOH405 VOM405 W7OLMC W7OLMG \ + walnut WUH405 XPEDITE1K yellowstone \ + yosemite yucca \ " ######################################################################### diff --git a/Makefile b/Makefile index d5e220aadde..2d8cff3ffa4 100644 --- a/Makefile +++ b/Makefile @@ -1139,6 +1139,9 @@ katmai_config: unconfig luan_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc +lwmon5_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc ppc4xx lwmon5 + METROBOX_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst diff --git a/board/lwmon5/Makefile b/board/lwmon5/Makefile new file mode 100644 index 00000000000..06ef7f93317 --- /dev/null +++ b/board/lwmon5/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2002-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o sdram.o +SOBJS = init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/lwmon5/config.mk b/board/lwmon5/config.mk new file mode 100644 index 00000000000..bf2b8798c1c --- /dev/null +++ b/board/lwmon5/config.mk @@ -0,0 +1,39 @@ +# +# (C) Copyright 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# +# lwmon5 (440EPx) +# + +ifndef TEXT_BASE +TEXT_BASE = 0xFFF80000 +endif + +PLATFORM_CPPFLAGS += -DCONFIG_440=1 + +ifeq ($(debug),1) +PLATFORM_CPPFLAGS += -DDEBUG +endif + +ifeq ($(dbcr),1) +PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000 +endif diff --git a/board/lwmon5/init.S b/board/lwmon5/init.S new file mode 100644 index 00000000000..6798e80985d --- /dev/null +++ b/board/lwmon5/init.S @@ -0,0 +1,90 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * Copyright (C) 2002 Scott McNutt + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +/************************************************************************** + * TLB TABLE + * + * This table is used by the cpu boot code to setup the initial tlb + * entries. Rather than make broad assumptions in the cpu source tree, + * this table lets each board set things up however they like. + * + * Pointer to the table is returned in r1 + * + *************************************************************************/ + .section .bootpg,"ax" + .globl tlbtab + +tlbtab: + tlbtab_start + + /* + * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the + * speed up boot process. It is patched after relocation to enable SA_I + */ + tlbentry(CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G) + + /* + * TLB entries for SDRAM are not needed on this platform. + * They are dynamically generated in the SPD DDR(2) detection + * routine. + */ + +#ifdef CFG_INIT_RAM_DCACHE + /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ + tlbentry(CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G) +#endif + + /* TLB-entry for PCI Memory */ + tlbentry(CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I) + + /* TLB-entry for the FPGA Chip select 2 */ + tlbentry(CFG_FPGA_BASE_0, SZ_1M, CFG_FPGA_BASE_0, 1, AC_R|AC_W|AC_X|SA_I|SA_G) + + /* TLB-entry for the FPGA Chip select 3 */ + tlbentry(CFG_FPGA_BASE_1, SZ_1M, CFG_FPGA_BASE_1, 1,AC_R|AC_W|AC_X|SA_I|SA_G) + + /* TLB-entry for the LIME Controller */ + tlbentry(CFG_LIME_BASE_0, SZ_16M, CFG_LIME_BASE_0, 1, AC_R|AC_W|AC_X|SA_I|SA_G) + tlbentry(CFG_LIME_BASE_1, SZ_16M, CFG_LIME_BASE_1, 1, AC_R|AC_W|AC_X|SA_I|SA_G) + tlbentry(CFG_LIME_BASE_2, SZ_16M, CFG_LIME_BASE_2, 1, AC_R|AC_W|AC_X|SA_I|SA_G) + tlbentry(CFG_LIME_BASE_3, SZ_16M, CFG_LIME_BASE_3, 1, AC_R|AC_W|AC_X|SA_I|SA_G) + + /* TLB-entry for Internal Registers & OCM */ + tlbentry(0xe0000000, SZ_16M, 0xe0000000, 0, AC_R|AC_W|AC_X|SA_I) + + /*TLB-entry PCI registers*/ + tlbentry(0xEEC00000, SZ_1K, 0xEEC00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I) + + /* TLB-entry for peripherals */ + tlbentry(0xEF000000, SZ_16M, 0xEF000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I) + + tlbtab_end diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c new file mode 100644 index 00000000000..69b45acac7e --- /dev/null +++ b/board/lwmon5/lwmon5.c @@ -0,0 +1,464 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ + +ulong flash_get_size (ulong base, int banknum); + +int board_early_init_f(void) +{ + u32 sdr0_pfc1, sdr0_pfc2; + u32 reg; + + /* PLB Write pipelining disabled. Denali Core workaround */ + mtdcr(plb0_acr, 0xDE000000); + mtdcr(plb1_acr, 0xDE000000); + + /*-------------------------------------------------------------------- + * Setup the interrupt controller polarities, triggers, etc. + *-------------------------------------------------------------------*/ + mtdcr(uic0sr, 0xffffffff); /* clear all. if write with 1 then the status is cleared */ + mtdcr(uic0er, 0x00000000); /* disable all */ + mtdcr(uic0cr, 0x00000000); /* we have not critical interrupts at the moment */ + mtdcr(uic0pr, 0xfffff7ff); /* Adjustment of the polarity */ + mtdcr(uic0tr, 0x00000810); /* per ref-board manual */ + mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */ + mtdcr(uic0sr, 0xffffffff); /* clear all */ + + mtdcr(uic1sr, 0xffffffff); /* clear all */ + mtdcr(uic1er, 0x00000000); /* disable all */ + mtdcr(uic1cr, 0x00000000); /* all non-critical */ + mtdcr(uic1pr, 0xFFFFC7AD); /* Adjustment of the polarity */ + mtdcr(uic1tr, 0x0600384A); /* per ref-board manual */ + mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */ + mtdcr(uic1sr, 0xffffffff); /* clear all */ + + mtdcr(uic2sr, 0xffffffff); /* clear all */ + mtdcr(uic2er, 0x00000000); /* disable all */ + mtdcr(uic2cr, 0x00000000); /* all non-critical */ + mtdcr(uic2pr, 0x27C00000); /* Adjustment of the polarity */ + mtdcr(uic2tr, 0xDFC00000); /* per ref-board manual */ + mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */ + mtdcr(uic2sr, 0xffffffff); /* clear all. Why this??? */ + + /* Trace Pins are disabled. SDR0_PFC0 Register */ + mtsdr(SDR0_PFC0, 0x0); + + /* select Ethernet pins */ + mfsdr(SDR0_PFC1, sdr0_pfc1); + /* SMII via ZMII */ + sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) | + SDR0_PFC1_SELECT_CONFIG_6; + mfsdr(SDR0_PFC2, sdr0_pfc2); + sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) | + SDR0_PFC2_SELECT_CONFIG_6; + + /* enable SPI (SCP) */ + sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_SCP_SEL; + + mtsdr(SDR0_PFC2, sdr0_pfc2); + mtsdr(SDR0_PFC1, sdr0_pfc1); + + mtsdr(SDR0_PFC4, 0x80000000); + + /* PCI arbiter disabled */ + /* PCI Host Configuration disbaled */ + mfsdr(sdr_pci0, reg); + reg = 0; + mtsdr(sdr_pci0, 0x00000000 | reg); + + gpio_write_bit(CFG_GPIO_FLASH_WP, 1); + + return 0; +} + +/*---------------------------------------------------------------------------+ + | misc_init_r. + +---------------------------------------------------------------------------*/ +int misc_init_r(void) +{ + u32 pbcr; + int size_val = 0; + u32 reg; + unsigned long usb2d0cr = 0; + unsigned long usb2phy0cr, usb2h0cr = 0; + unsigned long sdr0_pfc1; + + /* + * FLASH stuff... + */ + + /* Re-do sizing to get full correct info */ + + /* adjust flash start and offset */ + gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; + gd->bd->bi_flashoffset = 0; + + mfebc(pb0cr, pbcr); + switch (gd->bd->bi_flashsize) { + case 1 << 20: + size_val = 0; + break; + case 2 << 20: + size_val = 1; + break; + case 4 << 20: + size_val = 2; + break; + case 8 << 20: + size_val = 3; + break; + case 16 << 20: + size_val = 4; + break; + case 32 << 20: + size_val = 5; + break; + case 64 << 20: + size_val = 6; + break; + case 128 << 20: + size_val = 7; + break; + } + pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17); + mtebc(pb0cr, pbcr); + + /* + * Re-check to get correct base address + */ + flash_get_size(gd->bd->bi_flashstart, 0); + + /* Monitor protection ON by default */ + (void)flash_protect(FLAG_PROTECT_SET, + -CFG_MONITOR_LEN, + 0xffffffff, + &flash_info[0]); + + /* Env protection ON by default */ + (void)flash_protect(FLAG_PROTECT_SET, + CFG_ENV_ADDR_REDUND, + CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1, + &flash_info[0]); + + /* + * USB suff... + */ + /* SDR Setting */ + mfsdr(SDR0_PFC1, sdr0_pfc1); + mfsdr(SDR0_USB0, usb2d0cr); + mfsdr(SDR0_USB2PHY0CR, usb2phy0cr); + mfsdr(SDR0_USB2H0CR, usb2h0cr); + + usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/ + usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ; /*1*/ + usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; /*0*/ + usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1*/ + usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1*/ + + /* An 8-bit/60MHz interface is the only possible alternative + when connecting the Device to the PHY */ + usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK; + usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ; /*1*/ + + mtsdr(SDR0_PFC1, sdr0_pfc1); + mtsdr(SDR0_USB0, usb2d0cr); + mtsdr(SDR0_USB2PHY0CR, usb2phy0cr); + mtsdr(SDR0_USB2H0CR, usb2h0cr); + + /* + * Clear resets + */ + udelay (1000); + mtsdr(SDR0_SRST1, 0x00000000); + udelay (1000); + mtsdr(SDR0_SRST0, 0x00000000); + + printf("USB: Host(int phy) Device(ext phy)\n"); + + /* + * Clear PLB4A0_ACR[WRP] + * This fix will make the MAL burst disabling patch for the Linux + * EMAC driver obsolete. + */ + reg = mfdcr(plb4_acr) & ~PLB4_ACR_WRP; + mtdcr(plb4_acr, reg); + + /* + * Reset Lime controller + */ + gpio_write_bit(CFG_GPIO_LIME_S, 1); + udelay(500); + gpio_write_bit(CFG_GPIO_LIME_RST, 1); + + /* + * Reset PHY's + */ + gpio_write_bit(CFG_GPIO_PHY0_RST, 0); + gpio_write_bit(CFG_GPIO_PHY1_RST, 0); + udelay(100); + gpio_write_bit(CFG_GPIO_PHY0_RST, 1); + gpio_write_bit(CFG_GPIO_PHY1_RST, 1); + + /* + * Reset USB hub + */ + gpio_write_bit(CFG_GPIO_HUB_RST, 0); + udelay(100); + gpio_write_bit(CFG_GPIO_HUB_RST, 1); + + return 0; +} + +int checkboard(void) +{ + char *s = getenv("serial#"); + + printf("Board: lwmon5"); + + if (s != NULL) { + puts(", serial# "); + puts(s); + } + putc('\n'); + + return (0); +} + +#if defined(CFG_DRAM_TEST) +int testdram(void) +{ + unsigned long *mem = (unsigned long *)0; + const unsigned long kend = (1024 / sizeof(unsigned long)); + unsigned long k, n; + + mtmsr(0); + + for (k = 0; k < CFG_MBYTES_SDRAM; + ++k, mem += (1024 / sizeof(unsigned long))) { + if ((k & 1023) == 0) { + printf("%3d MB\r", k / 1024); + } + + memset(mem, 0xaaaaaaaa, 1024); + for (n = 0; n < kend; ++n) { + if (mem[n] != 0xaaaaaaaa) { + printf("SDRAM test fails at: %08x\n", + (uint) & mem[n]); + return 1; + } + } + + memset(mem, 0x55555555, 1024); + for (n = 0; n < kend; ++n) { + if (mem[n] != 0x55555555) { + printf("SDRAM test fails at: %08x\n", + (uint) & mem[n]); + return 1; + } + } + } + printf("SDRAM test passes\n"); + return 0; +} +#endif + +/************************************************************************* + * pci_pre_init + * + * This routine is called just prior to registering the hose and gives + * the board the opportunity to check things. Returning a value of zero + * indicates that things are bad & PCI initialization should be aborted. + * + * Different boards may wish to customize the pci controller structure + * (add regions, override default access routines, etc) or perform + * certain pre-initialization actions. + * + ************************************************************************/ +#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) +int pci_pre_init(struct pci_controller *hose) +{ + unsigned long addr; + + /*-------------------------------------------------------------------------+ + | Set priority for all PLB3 devices to 0. + | Set PLB3 arbiter to fair mode. + +-------------------------------------------------------------------------*/ + mfsdr(sdr_amp1, addr); + mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00); + addr = mfdcr(plb3_acr); + mtdcr(plb3_acr, addr | 0x80000000); + + /*-------------------------------------------------------------------------+ + | Set priority for all PLB4 devices to 0. + +-------------------------------------------------------------------------*/ + mfsdr(sdr_amp0, addr); + mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00); + addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */ + mtdcr(plb4_acr, addr); + + /*-------------------------------------------------------------------------+ + | Set Nebula PLB4 arbiter to fair mode. + +-------------------------------------------------------------------------*/ + /* Segment0 */ + addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair; + addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled; + addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep; + addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep; + mtdcr(plb0_acr, addr); + + /* Segment1 */ + addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair; + addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled; + addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep; + addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep; + mtdcr(plb1_acr, addr); + + return 1; +} +#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */ + +/************************************************************************* + * pci_target_init + * + * The bootstrap configuration provides default settings for the pci + * inbound map (PIM). But the bootstrap config choices are limited and + * may not be sufficient for a given board. + * + ************************************************************************/ +#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) +void pci_target_init(struct pci_controller *hose) +{ + /*--------------------------------------------------------------------------+ + * Set up Direct MMIO registers + *--------------------------------------------------------------------------*/ + /*--------------------------------------------------------------------------+ + | PowerPC440EPX PCI Master configuration. + | Map one 1Gig range of PLB/processor addresses to PCI memory space. + | PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF + | Use byte reversed out routines to handle endianess. + | Make this region non-prefetchable. + +--------------------------------------------------------------------------*/ + out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ + out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */ + out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */ + out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ + out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */ + + out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ + out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */ + out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */ + out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ + out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */ + + out32r(PCIX0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ + out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */ + out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */ + out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */ + + /*--------------------------------------------------------------------------+ + * Set up Configuration registers + *--------------------------------------------------------------------------*/ + + /* Program the board's subsystem id/vendor id */ + pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID, + CFG_PCI_SUBSYS_VENDORID); + pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID); + + /* Configure command register as bus master */ + pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); + + /* 240nS PCI clock */ + pci_write_config_word(0, PCI_LATENCY_TIMER, 1); + + /* No error reporting */ + pci_write_config_word(0, PCI_ERREN, 0); + + pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); + +} +#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */ + +/************************************************************************* + * pci_master_init + * + ************************************************************************/ +#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) +void pci_master_init(struct pci_controller *hose) +{ + unsigned short temp_short; + + /*--------------------------------------------------------------------------+ + | Write the PowerPC440 EP PCI Configuration regs. + | Enable PowerPC440 EP to be a master on the PCI bus (PMM). + | Enable PowerPC440 EP to act as a PCI memory target (PTM). + +--------------------------------------------------------------------------*/ + pci_read_config_word(0, PCI_COMMAND, &temp_short); + pci_write_config_word(0, PCI_COMMAND, + temp_short | PCI_COMMAND_MASTER | + PCI_COMMAND_MEMORY); +} +#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */ + +/************************************************************************* + * is_pci_host + * + * This routine is called to determine if a pci scan should be + * performed. With various hardware environments (especially cPCI and + * PPMC) it's insufficient to depend on the state of the arbiter enable + * bit in the strap register, or generic host/adapter assumptions. + * + * Rather than hard-code a bad assumption in the general 440 code, the + * 440 pci code requires the board to decide at runtime. + * + * Return 0 for adapter mode, non-zero for host (monarch) mode. + * + * + ************************************************************************/ +#if defined(CONFIG_PCI) +int is_pci_host(struct pci_controller *hose) +{ + /* Cactus is always configured as host. */ + return (1); +} +#endif /* defined(CONFIG_PCI) */ + +void hw_watchdog_reset(void) +{ + int val; + + /* + * Toggle watchdog output + */ + val = gpio_read_out_bit(CFG_GPIO_WATCHDOG) == 0 ? 1 : 0; + gpio_write_bit(CFG_GPIO_WATCHDOG, val); +} diff --git a/board/lwmon5/sdram.c b/board/lwmon5/sdram.c new file mode 100644 index 00000000000..d2eb5bd1a8f --- /dev/null +++ b/board/lwmon5/sdram.c @@ -0,0 +1,598 @@ +/* + * (C) Copyright 2006 + * Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com + * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com + * Thierry Roman, AMCC/IBM, thierry_roman@fr.ibm.com + * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com + * Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com + * + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* define DEBUG for debugging output (obviously ;-)) */ +#if 0 +#define DEBUG +#endif + +#include +#include +#include +#include +#include + +#include "sdram.h" + +/* + * This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory + * region. Right now the cache should still be disabled in U-Boot because of the + * EMAC driver, that need it's buffer descriptor to be located in non cached + * memory. + * + * If at some time this restriction doesn't apply anymore, just define + * CFG_ENABLE_SDRAM_CACHE in the board config file and this code should setup + * everything correctly. + */ +#ifdef CFG_ENABLE_SDRAM_CACHE +#define MY_TLB_WORD2_I_ENABLE 0 /* enable caching on SDRAM */ +#else +#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */ +#endif + +void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value); +void dcbz_area(u32 start_address, u32 num_bytes); +void dflush(void); + +#ifdef CONFIG_ADD_RAM_INFO +static u32 is_ecc_enabled(void) +{ + u32 val; + + mfsdram(DDR0_22, val); + val &= DDR0_22_CTRL_RAW_MASK; + if (val) + return 1; + else + return 0; +} + +void board_add_ram_info(int use_default) +{ + PPC440_SYS_INFO board_cfg; + u32 val; + + if (is_ecc_enabled()) + puts(" (ECC"); + else + puts(" (ECC not"); + + get_sys_info(&board_cfg); + printf(" enabled, %d MHz", (board_cfg.freqPLB * 2) / 1000000); + + mfsdram(DDR0_03, val); + val = DDR0_03_CASLAT_DECODE(val); + printf(", CL%d)", val); +} +#endif + +static int wait_for_dlllock(void) +{ + u32 val; + int wait = 0; + + /* + * Wait for the DCC master delay line to finish calibration + */ + mtdcr(ddrcfga, DDR0_17); + val = DDR0_17_DLLLOCKREG_UNLOCKED; + + while (wait != 0xffff) { + val = mfdcr(ddrcfgd); + if ((val & DDR0_17_DLLLOCKREG_MASK) == DDR0_17_DLLLOCKREG_LOCKED) + /* dlllockreg bit on */ + return 0; + else + wait++; + } + debug("0x%04x: DDR0_17 Value (dlllockreg bit): 0x%08x\n", wait, val); + debug("Waiting for dlllockreg bit to raise\n"); + + return -1; +} + +#if defined(CONFIG_DDR_DATA_EYE) +int wait_for_dram_init_complete(void) +{ + u32 val; + int wait = 0; + + /* + * Wait for 'DRAM initialization complete' bit in status register + */ + mtdcr(ddrcfga, DDR0_00); + + while (wait != 0xffff) { + val = mfdcr(ddrcfgd); + if ((val & DDR0_00_INT_STATUS_BIT6) == DDR0_00_INT_STATUS_BIT6) + /* 'DRAM initialization complete' bit */ + return 0; + else + wait++; + } + + debug("DRAM initialization complete bit in status register did not rise\n"); + + return -1; +} + +#define NUM_TRIES 64 +#define NUM_READS 10 + +void denali_core_search_data_eye(u32 start_addr, u32 memory_size) +{ + int k, j; + u32 val; + u32 wr_dqs_shift, dqs_out_shift, dll_dqs_delay_X; + u32 max_passing_cases = 0, wr_dqs_shift_with_max_passing_cases = 0; + u32 passing_cases = 0, dll_dqs_delay_X_sw_val = 0; + u32 dll_dqs_delay_X_start_window = 0, dll_dqs_delay_X_end_window = 0; + volatile u32 *ram_pointer; + u32 test[NUM_TRIES] = { + 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, + 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, + 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, + 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, + 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, + 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, + 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, + 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, + 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, + 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, + 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, + 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, + 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, + 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55, + 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 }; + + ram_pointer = (volatile u32 *)start_addr; + + for (wr_dqs_shift = 64; wr_dqs_shift < 96; wr_dqs_shift++) { + /*for (wr_dqs_shift=1; wr_dqs_shift<96; wr_dqs_shift++) {*/ + + /* + * De-assert 'start' parameter. + */ + mtdcr(ddrcfga, DDR0_02); + val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF; + mtdcr(ddrcfgd, val); + + /* + * Set 'wr_dqs_shift' + */ + mtdcr(ddrcfga, DDR0_09); + val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK) + | DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift); + mtdcr(ddrcfgd, val); + + /* + * Set 'dqs_out_shift' = wr_dqs_shift + 32 + */ + dqs_out_shift = wr_dqs_shift + 32; + mtdcr(ddrcfga, DDR0_22); + val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK) + | DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift); + mtdcr(ddrcfgd, val); + + passing_cases = 0; + + for (dll_dqs_delay_X = 1; dll_dqs_delay_X < 64; dll_dqs_delay_X++) { + /*for (dll_dqs_delay_X=1; dll_dqs_delay_X<128; dll_dqs_delay_X++) {*/ + /* + * Set 'dll_dqs_delay_X'. + */ + /* dll_dqs_delay_0 */ + mtdcr(ddrcfga, DDR0_17); + val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK) + | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X); + mtdcr(ddrcfgd, val); + /* dll_dqs_delay_1 to dll_dqs_delay_4 */ + mtdcr(ddrcfga, DDR0_18); + val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK) + | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X) + | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X) + | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X) + | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X); + mtdcr(ddrcfgd, val); + /* dll_dqs_delay_5 to dll_dqs_delay_8 */ + mtdcr(ddrcfga, DDR0_19); + val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK) + | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X) + | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X) + | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X) + | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X); + mtdcr(ddrcfgd, val); + + ppcMsync(); + ppcMbar(); + + /* + * Assert 'start' parameter. + */ + mtdcr(ddrcfga, DDR0_02); + val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON; + mtdcr(ddrcfgd, val); + + ppcMsync(); + ppcMbar(); + + /* + * Wait for the DCC master delay line to finish calibration + */ + if (wait_for_dlllock() != 0) { + printf("dlllock did not occur !!!\n"); + printf("denali_core_search_data_eye!!!\n"); + printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n", + wr_dqs_shift, dll_dqs_delay_X); + hang(); + } + ppcMsync(); + ppcMbar(); + + if (wait_for_dram_init_complete() != 0) { + printf("dram init complete did not occur !!!\n"); + printf("denali_core_search_data_eye!!!\n"); + printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n", + wr_dqs_shift, dll_dqs_delay_X); + hang(); + } + udelay(100); /* wait 100us to ensure init is really completed !!! */ + + /* write values */ + for (j=0; j= max_passing_cases) { + max_passing_cases = passing_cases; + wr_dqs_shift_with_max_passing_cases = wr_dqs_shift; + dll_dqs_delay_X_start_window = dll_dqs_delay_X_sw_val; + dll_dqs_delay_X_end_window = dll_dqs_delay_X; + } + } + + /* + * De-assert 'start' parameter. + */ + mtdcr(ddrcfga, DDR0_02); + val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF; + mtdcr(ddrcfgd, val); + + } /* for (dll_dqs_delay_X=0; dll_dqs_delay_X<128; dll_dqs_delay_X++) */ + + } /* for (wr_dqs_shift=0; wr_dqs_shift<96; wr_dqs_shift++) */ + + /* + * Largest passing window is now detected. + */ + + /* Compute dll_dqs_delay_X value */ + dll_dqs_delay_X = (dll_dqs_delay_X_end_window + dll_dqs_delay_X_start_window) / 2; + wr_dqs_shift = wr_dqs_shift_with_max_passing_cases; + + debug("DQS calibration - Window detected:\n"); + debug("max_passing_cases = %d\n", max_passing_cases); + debug("wr_dqs_shift = %d\n", wr_dqs_shift); + debug("dll_dqs_delay_X = %d\n", dll_dqs_delay_X); + debug("dll_dqs_delay_X window = %d - %d\n", + dll_dqs_delay_X_start_window, dll_dqs_delay_X_end_window); + + /* + * De-assert 'start' parameter. + */ + mtdcr(ddrcfga, DDR0_02); + val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF; + mtdcr(ddrcfgd, val); + + /* + * Set 'wr_dqs_shift' + */ + mtdcr(ddrcfga, DDR0_09); + val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK) + | DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift); + mtdcr(ddrcfgd, val); + debug("DDR0_09=0x%08lx\n", val); + + /* + * Set 'dqs_out_shift' = wr_dqs_shift + 32 + */ + dqs_out_shift = wr_dqs_shift + 32; + mtdcr(ddrcfga, DDR0_22); + val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK) + | DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift); + mtdcr(ddrcfgd, val); + debug("DDR0_22=0x%08lx\n", val); + + /* + * Set 'dll_dqs_delay_X'. + */ + /* dll_dqs_delay_0 */ + mtdcr(ddrcfga, DDR0_17); + val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK) + | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X); + mtdcr(ddrcfgd, val); + debug("DDR0_17=0x%08lx\n", val); + + /* dll_dqs_delay_1 to dll_dqs_delay_4 */ + mtdcr(ddrcfga, DDR0_18); + val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK) + | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X) + | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X) + | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X) + | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X); + mtdcr(ddrcfgd, val); + debug("DDR0_18=0x%08lx\n", val); + + /* dll_dqs_delay_5 to dll_dqs_delay_8 */ + mtdcr(ddrcfga, DDR0_19); + val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK) + | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X) + | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X) + | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X) + | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X); + mtdcr(ddrcfgd, val); + debug("DDR0_19=0x%08lx\n", val); + + /* + * Assert 'start' parameter. + */ + mtdcr(ddrcfga, DDR0_02); + val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON; + mtdcr(ddrcfgd, val); + + ppcMsync(); + ppcMbar(); + + /* + * Wait for the DCC master delay line to finish calibration + */ + if (wait_for_dlllock() != 0) { + printf("dlllock did not occur !!!\n"); + hang(); + } + ppcMsync(); + ppcMbar(); + + if (wait_for_dram_init_complete() != 0) { + printf("dram init complete did not occur !!!\n"); + hang(); + } + udelay(100); /* wait 100us to ensure init is really completed !!! */ +} +#endif /* CONFIG_DDR_DATA_EYE */ + +#ifdef CONFIG_DDR_ECC +static void wait_ddr_idle(void) +{ + /* + * Controller idle status cannot be determined for Denali + * DDR2 code. Just return here. + */ +} + +static void blank_string(int size) +{ + int i; + + for (i=0; i>24)&0x7F) +/* Status */ +#define DDR0_00_INT_STATUS_MASK 0x00FF0000 /* Read only */ +/* Bit0. A single access outside the defined PHYSICAL memory space detected. */ +#define DDR0_00_INT_STATUS_BIT0 0x00010000 +/* Bit1. Multiple accesses outside the defined PHYSICAL memory space detected. */ +#define DDR0_00_INT_STATUS_BIT1 0x00020000 +/* Bit2. Single correctable ECC event detected */ +#define DDR0_00_INT_STATUS_BIT2 0x00040000 +/* Bit3. Multiple correctable ECC events detected. */ +#define DDR0_00_INT_STATUS_BIT3 0x00080000 +/* Bit4. Single uncorrectable ECC event detected. */ +#define DDR0_00_INT_STATUS_BIT4 0x00100000 +/* Bit5. Multiple uncorrectable ECC events detected. */ +#define DDR0_00_INT_STATUS_BIT5 0x00200000 +/* Bit6. DRAM initialization complete. */ +#define DDR0_00_INT_STATUS_BIT6 0x00400000 +/* Bit7. Logical OR of all lower bits. */ +#define DDR0_00_INT_STATUS_BIT7 0x00800000 + +#define DDR0_00_INT_STATUS_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16) +#define DDR0_00_INT_STATUS_DECODE(n) ((((unsigned long)(n))>>16)&0xFF) +#define DDR0_00_DLL_INCREMENT_MASK 0x00007F00 +#define DDR0_00_DLL_INCREMENT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_00_DLL_INCREMENT_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) +#define DDR0_00_DLL_START_POINT_MASK 0x0000007F +#define DDR0_00_DLL_START_POINT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_00_DLL_START_POINT_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + + +#define DDR0_01 0x01 +#define DDR0_01_PLB0_DB_CS_LOWER_MASK 0x1F000000 +#define DDR0_01_PLB0_DB_CS_LOWER_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24) +#define DDR0_01_PLB0_DB_CS_LOWER_DECODE(n) ((((unsigned long)(n))>>24)&0x1F) +#define DDR0_01_PLB0_DB_CS_UPPER_MASK 0x001F0000 +#define DDR0_01_PLB0_DB_CS_UPPER_ENCODE(n) ((((unsigned long)(n))&0x1F)<<16) +#define DDR0_01_PLB0_DB_CS_UPPER_DECODE(n) ((((unsigned long)(n))>>16)&0x1F) +#define DDR0_01_OUT_OF_RANGE_TYPE_MASK 0x00000700 /* Read only */ +#define DDR0_01_OUT_OF_RANGE_TYPE_ENCODE(n) ((((unsigned long)(n))&0x7)<<8) +#define DDR0_01_OUT_OF_RANGE_TYPE_DECODE(n) ((((unsigned long)(n))>>8)&0x7) +#define DDR0_01_INT_MASK_MASK 0x000000FF +#define DDR0_01_INT_MASK_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0) +#define DDR0_01_INT_MASK_DECODE(n) ((((unsigned long)(n))>>0)&0xFF) +#define DDR0_01_INT_MASK_ALL_ON 0x000000FF +#define DDR0_01_INT_MASK_ALL_OFF 0x00000000 + +#define DDR0_02 0x02 +#define DDR0_02_MAX_CS_REG_MASK 0x02000000 /* Read only */ +#define DDR0_02_MAX_CS_REG_ENCODE(n) ((((unsigned long)(n))&0x2)<<24) +#define DDR0_02_MAX_CS_REG_DECODE(n) ((((unsigned long)(n))>>24)&0x2) +#define DDR0_02_MAX_COL_REG_MASK 0x000F0000 /* Read only */ +#define DDR0_02_MAX_COL_REG_ENCODE(n) ((((unsigned long)(n))&0xF)<<16) +#define DDR0_02_MAX_COL_REG_DECODE(n) ((((unsigned long)(n))>>16)&0xF) +#define DDR0_02_MAX_ROW_REG_MASK 0x00000F00 /* Read only */ +#define DDR0_02_MAX_ROW_REG_ENCODE(n) ((((unsigned long)(n))&0xF)<<8) +#define DDR0_02_MAX_ROW_REG_DECODE(n) ((((unsigned long)(n))>>8)&0xF) +#define DDR0_02_START_MASK 0x00000001 +#define DDR0_02_START_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_02_START_DECODE(n) ((((unsigned long)(n))>>0)&0x1) +#define DDR0_02_START_OFF 0x00000000 +#define DDR0_02_START_ON 0x00000001 + +#define DDR0_03 0x03 +#define DDR0_03_BSTLEN_MASK 0x07000000 +#define DDR0_03_BSTLEN_ENCODE(n) ((((unsigned long)(n))&0x7)<<24) +#define DDR0_03_BSTLEN_DECODE(n) ((((unsigned long)(n))>>24)&0x7) +#define DDR0_03_CASLAT_MASK 0x00070000 +#define DDR0_03_CASLAT_ENCODE(n) ((((unsigned long)(n))&0x7)<<16) +#define DDR0_03_CASLAT_DECODE(n) ((((unsigned long)(n))>>16)&0x7) +#define DDR0_03_CASLAT_LIN_MASK 0x00000F00 +#define DDR0_03_CASLAT_LIN_ENCODE(n) ((((unsigned long)(n))&0xF)<<8) +#define DDR0_03_CASLAT_LIN_DECODE(n) ((((unsigned long)(n))>>8)&0xF) +#define DDR0_03_INITAREF_MASK 0x0000000F +#define DDR0_03_INITAREF_ENCODE(n) ((((unsigned long)(n))&0xF)<<0) +#define DDR0_03_INITAREF_DECODE(n) ((((unsigned long)(n))>>0)&0xF) + +#define DDR0_04 0x04 +#define DDR0_04_TRC_MASK 0x1F000000 +#define DDR0_04_TRC_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24) +#define DDR0_04_TRC_DECODE(n) ((((unsigned long)(n))>>24)&0x1F) +#define DDR0_04_TRRD_MASK 0x00070000 +#define DDR0_04_TRRD_ENCODE(n) ((((unsigned long)(n))&0x7)<<16) +#define DDR0_04_TRRD_DECODE(n) ((((unsigned long)(n))>>16)&0x7) +#define DDR0_04_TRTP_MASK 0x00000700 +#define DDR0_04_TRTP_ENCODE(n) ((((unsigned long)(n))&0x7)<<8) +#define DDR0_04_TRTP_DECODE(n) ((((unsigned long)(n))>>8)&0x7) + +#define DDR0_05 0x05 +#define DDR0_05_TMRD_MASK 0x1F000000 +#define DDR0_05_TMRD_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24) +#define DDR0_05_TMRD_DECODE(n) ((((unsigned long)(n))>>24)&0x1F) +#define DDR0_05_TEMRS_MASK 0x00070000 +#define DDR0_05_TEMRS_ENCODE(n) ((((unsigned long)(n))&0x7)<<16) +#define DDR0_05_TEMRS_DECODE(n) ((((unsigned long)(n))>>16)&0x7) +#define DDR0_05_TRP_MASK 0x00000F00 +#define DDR0_05_TRP_ENCODE(n) ((((unsigned long)(n))&0xF)<<8) +#define DDR0_05_TRP_DECODE(n) ((((unsigned long)(n))>>8)&0xF) +#define DDR0_05_TRAS_MIN_MASK 0x000000FF +#define DDR0_05_TRAS_MIN_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0) +#define DDR0_05_TRAS_MIN_DECODE(n) ((((unsigned long)(n))>>0)&0xFF) + +#define DDR0_06 0x06 +#define DDR0_06_WRITEINTERP_MASK 0x01000000 +#define DDR0_06_WRITEINTERP_ENCODE(n) ((((unsigned long)(n))&0x1)<<24) +#define DDR0_06_WRITEINTERP_DECODE(n) ((((unsigned long)(n))>>24)&0x1) +#define DDR0_06_TWTR_MASK 0x00070000 +#define DDR0_06_TWTR_ENCODE(n) ((((unsigned long)(n))&0x7)<<16) +#define DDR0_06_TWTR_DECODE(n) ((((unsigned long)(n))>>16)&0x7) +#define DDR0_06_TDLL_MASK 0x0000FF00 +#define DDR0_06_TDLL_ENCODE(n) ((((unsigned long)(n))&0xFF)<<8) +#define DDR0_06_TDLL_DECODE(n) ((((unsigned long)(n))>>8)&0xFF) +#define DDR0_06_TRFC_MASK 0x0000007F +#define DDR0_06_TRFC_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_06_TRFC_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + +#define DDR0_07 0x07 +#define DDR0_07_NO_CMD_INIT_MASK 0x01000000 +#define DDR0_07_NO_CMD_INIT_ENCODE(n) ((((unsigned long)(n))&0x1)<<24) +#define DDR0_07_NO_CMD_INIT_DECODE(n) ((((unsigned long)(n))>>24)&0x1) +#define DDR0_07_TFAW_MASK 0x001F0000 +#define DDR0_07_TFAW_ENCODE(n) ((((unsigned long)(n))&0x1F)<<16) +#define DDR0_07_TFAW_DECODE(n) ((((unsigned long)(n))>>16)&0x1F) +#define DDR0_07_AUTO_REFRESH_MODE_MASK 0x00000100 +#define DDR0_07_AUTO_REFRESH_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<8) +#define DDR0_07_AUTO_REFRESH_MODE_DECODE(n) ((((unsigned long)(n))>>8)&0x1) +#define DDR0_07_AREFRESH_MASK 0x00000001 +#define DDR0_07_AREFRESH_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_07_AREFRESH_DECODE(n) ((((unsigned long)(n))>>0)&0x1) + +#define DDR0_08 0x08 +#define DDR0_08_WRLAT_MASK 0x07000000 +#define DDR0_08_WRLAT_ENCODE(n) ((((unsigned long)(n))&0x7)<<24) +#define DDR0_08_WRLAT_DECODE(n) ((((unsigned long)(n))>>24)&0x7) +#define DDR0_08_TCPD_MASK 0x00FF0000 +#define DDR0_08_TCPD_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16) +#define DDR0_08_TCPD_DECODE(n) ((((unsigned long)(n))>>16)&0xFF) +#define DDR0_08_DQS_N_EN_MASK 0x00000100 +#define DDR0_08_DQS_N_EN_ENCODE(n) ((((unsigned long)(n))&0x1)<<8) +#define DDR0_08_DQS_N_EN_DECODE(n) ((((unsigned long)(n))>>8)&0x1) +#define DDR0_08_DDRII_SDRAM_MODE_MASK 0x00000001 +#define DDR0_08_DDRII_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_08_DDRII_DECODE(n) ((((unsigned long)(n))>>0)&0x1) + +#define DDR0_09 0x09 +#define DDR0_09_OCD_ADJUST_PDN_CS_0_MASK 0x1F000000 +#define DDR0_09_OCD_ADJUST_PDN_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24) +#define DDR0_09_OCD_ADJUST_PDN_CS_0_DECODE(n) ((((unsigned long)(n))>>24)&0x1F) +#define DDR0_09_RTT_0_MASK 0x00030000 +#define DDR0_09_RTT_0_ENCODE(n) ((((unsigned long)(n))&0x3)<<16) +#define DDR0_09_RTT_0_DECODE(n) ((((unsigned long)(n))>>16)&0x3) +#define DDR0_09_WR_DQS_SHIFT_BYPASS_MASK 0x00007F00 +#define DDR0_09_WR_DQS_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_09_WR_DQS_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) +#define DDR0_09_WR_DQS_SHIFT_MASK 0x0000007F +#define DDR0_09_WR_DQS_SHIFT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_09_WR_DQS_SHIFT_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + +#define DDR0_10 0x0A +#define DDR0_10_WRITE_MODEREG_MASK 0x00010000 /* Write only */ +#define DDR0_10_WRITE_MODEREG_ENCODE(n) ((((unsigned long)(n))&0x1)<<16) +#define DDR0_10_WRITE_MODEREG_DECODE(n) ((((unsigned long)(n))>>16)&0x1) +#define DDR0_10_CS_MAP_MASK 0x00000300 +#define DDR0_10_CS_MAP_NO_MEM 0x00000000 +#define DDR0_10_CS_MAP_RANK0_INSTALLED 0x00000100 +#define DDR0_10_CS_MAP_RANK1_INSTALLED 0x00000200 +#define DDR0_10_CS_MAP_ENCODE(n) ((((unsigned long)(n))&0x3)<<8) +#define DDR0_10_CS_MAP_DECODE(n) ((((unsigned long)(n))>>8)&0x3) +#define DDR0_10_OCD_ADJUST_PUP_CS_0_MASK 0x0000001F +#define DDR0_10_OCD_ADJUST_PUP_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<0) +#define DDR0_10_OCD_ADJUST_PUP_CS_0_DECODE(n) ((((unsigned long)(n))>>0)&0x1F) + +#define DDR0_11 0x0B +#define DDR0_11_SREFRESH_MASK 0x01000000 +#define DDR0_11_SREFRESH_ENCODE(n) ((((unsigned long)(n))&0x1)<<24) +#define DDR0_11_SREFRESH_DECODE(n) ((((unsigned long)(n))>>24)&0x1F) +#define DDR0_11_TXSNR_MASK 0x00FF0000 +#define DDR0_11_TXSNR_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16) +#define DDR0_11_TXSNR_DECODE(n) ((((unsigned long)(n))>>16)&0xFF) +#define DDR0_11_TXSR_MASK 0x0000FF00 +#define DDR0_11_TXSR_ENCODE(n) ((((unsigned long)(n))&0xFF)<<8) +#define DDR0_11_TXSR_DECODE(n) ((((unsigned long)(n))>>8)&0xFF) + +#define DDR0_12 0x0C +#define DDR0_12_TCKE_MASK 0x0000007 +#define DDR0_12_TCKE_ENCODE(n) ((((unsigned long)(n))&0x7)<<0) +#define DDR0_12_TCKE_DECODE(n) ((((unsigned long)(n))>>0)&0x7) + +#define DDR0_13 0x0D + +#define DDR0_14 0x0E +#define DDR0_14_DLL_BYPASS_MODE_MASK 0x01000000 +#define DDR0_14_DLL_BYPASS_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<24) +#define DDR0_14_DLL_BYPASS_MODE_DECODE(n) ((((unsigned long)(n))>>24)&0x1) +#define DDR0_14_REDUC_MASK 0x00010000 +#define DDR0_14_REDUC_64BITS 0x00000000 +#define DDR0_14_REDUC_32BITS 0x00010000 +#define DDR0_14_REDUC_ENCODE(n) ((((unsigned long)(n))&0x1)<<16) +#define DDR0_14_REDUC_DECODE(n) ((((unsigned long)(n))>>16)&0x1) +#define DDR0_14_REG_DIMM_ENABLE_MASK 0x00000100 +#define DDR0_14_REG_DIMM_ENABLE_ENCODE(n) ((((unsigned long)(n))&0x1)<<8) +#define DDR0_14_REG_DIMM_ENABLE_DECODE(n) ((((unsigned long)(n))>>8)&0x1) + +#define DDR0_15 0x0F + +#define DDR0_16 0x10 + +#define DDR0_17 0x11 +#define DDR0_17_DLL_DQS_DELAY_0_MASK 0x7F000000 +#define DDR0_17_DLL_DQS_DELAY_0_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24) +#define DDR0_17_DLL_DQS_DELAY_0_DECODE(n) ((((unsigned long)(n))>>24)&0x7F) +#define DDR0_17_DLLLOCKREG_MASK 0x00010000 /* Read only */ +#define DDR0_17_DLLLOCKREG_LOCKED 0x00010000 +#define DDR0_17_DLLLOCKREG_UNLOCKED 0x00000000 +#define DDR0_17_DLLLOCKREG_ENCODE(n) ((((unsigned long)(n))&0x1)<<16) +#define DDR0_17_DLLLOCKREG_DECODE(n) ((((unsigned long)(n))>>16)&0x1) +#define DDR0_17_DLL_LOCK_MASK 0x00007F00 /* Read only */ +#define DDR0_17_DLL_LOCK_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_17_DLL_LOCK_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) + +#define DDR0_18 0x12 +#define DDR0_18_DLL_DQS_DELAY_X_MASK 0x7F7F7F7F +#define DDR0_18_DLL_DQS_DELAY_4_MASK 0x7F000000 +#define DDR0_18_DLL_DQS_DELAY_4_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24) +#define DDR0_18_DLL_DQS_DELAY_4_DECODE(n) ((((unsigned long)(n))>>24)&0x7F) +#define DDR0_18_DLL_DQS_DELAY_3_MASK 0x007F0000 +#define DDR0_18_DLL_DQS_DELAY_3_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16) +#define DDR0_18_DLL_DQS_DELAY_3_DECODE(n) ((((unsigned long)(n))>>16)&0x7F) +#define DDR0_18_DLL_DQS_DELAY_2_MASK 0x00007F00 +#define DDR0_18_DLL_DQS_DELAY_2_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_18_DLL_DQS_DELAY_2_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) +#define DDR0_18_DLL_DQS_DELAY_1_MASK 0x0000007F +#define DDR0_18_DLL_DQS_DELAY_1_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_18_DLL_DQS_DELAY_1_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + +#define DDR0_19 0x13 +#define DDR0_19_DLL_DQS_DELAY_X_MASK 0x7F7F7F7F +#define DDR0_19_DLL_DQS_DELAY_8_MASK 0x7F000000 +#define DDR0_19_DLL_DQS_DELAY_8_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24) +#define DDR0_19_DLL_DQS_DELAY_8_DECODE(n) ((((unsigned long)(n))>>24)&0x7F) +#define DDR0_19_DLL_DQS_DELAY_7_MASK 0x007F0000 +#define DDR0_19_DLL_DQS_DELAY_7_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16) +#define DDR0_19_DLL_DQS_DELAY_7_DECODE(n) ((((unsigned long)(n))>>16)&0x7F) +#define DDR0_19_DLL_DQS_DELAY_6_MASK 0x00007F00 +#define DDR0_19_DLL_DQS_DELAY_6_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_19_DLL_DQS_DELAY_6_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) +#define DDR0_19_DLL_DQS_DELAY_5_MASK 0x0000007F +#define DDR0_19_DLL_DQS_DELAY_5_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_19_DLL_DQS_DELAY_5_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + +#define DDR0_20 0x14 +#define DDR0_20_DLL_DQS_BYPASS_3_MASK 0x7F000000 +#define DDR0_20_DLL_DQS_BYPASS_3_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24) +#define DDR0_20_DLL_DQS_BYPASS_3_DECODE(n) ((((unsigned long)(n))>>24)&0x7F) +#define DDR0_20_DLL_DQS_BYPASS_2_MASK 0x007F0000 +#define DDR0_20_DLL_DQS_BYPASS_2_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16) +#define DDR0_20_DLL_DQS_BYPASS_2_DECODE(n) ((((unsigned long)(n))>>16)&0x7F) +#define DDR0_20_DLL_DQS_BYPASS_1_MASK 0x00007F00 +#define DDR0_20_DLL_DQS_BYPASS_1_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_20_DLL_DQS_BYPASS_1_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) +#define DDR0_20_DLL_DQS_BYPASS_0_MASK 0x0000007F +#define DDR0_20_DLL_DQS_BYPASS_0_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_20_DLL_DQS_BYPASS_0_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + +#define DDR0_21 0x15 +#define DDR0_21_DLL_DQS_BYPASS_7_MASK 0x7F000000 +#define DDR0_21_DLL_DQS_BYPASS_7_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24) +#define DDR0_21_DLL_DQS_BYPASS_7_DECODE(n) ((((unsigned long)(n))>>24)&0x7F) +#define DDR0_21_DLL_DQS_BYPASS_6_MASK 0x007F0000 +#define DDR0_21_DLL_DQS_BYPASS_6_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16) +#define DDR0_21_DLL_DQS_BYPASS_6_DECODE(n) ((((unsigned long)(n))>>16)&0x7F) +#define DDR0_21_DLL_DQS_BYPASS_5_MASK 0x00007F00 +#define DDR0_21_DLL_DQS_BYPASS_5_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_21_DLL_DQS_BYPASS_5_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) +#define DDR0_21_DLL_DQS_BYPASS_4_MASK 0x0000007F +#define DDR0_21_DLL_DQS_BYPASS_4_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_21_DLL_DQS_BYPASS_4_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + +#define DDR0_22 0x16 +/* ECC */ +#define DDR0_22_CTRL_RAW_MASK 0x03000000 +#define DDR0_22_CTRL_RAW_ECC_DISABLE 0x00000000 /* ECC not being used */ +#define DDR0_22_CTRL_RAW_ECC_CHECK_ONLY 0x01000000 /* ECC checking is on, but no attempts to correct*/ +#define DDR0_22_CTRL_RAW_NO_ECC_RAM 0x02000000 /* No ECC RAM storage available */ +#define DDR0_22_CTRL_RAW_ECC_ENABLE 0x03000000 /* ECC checking and correcting on */ +#define DDR0_22_CTRL_RAW_ENCODE(n) ((((unsigned long)(n))&0x3)<<24) +#define DDR0_22_CTRL_RAW_DECODE(n) ((((unsigned long)(n))>>24)&0x3) + +#define DDR0_22_DQS_OUT_SHIFT_BYPASS_MASK 0x007F0000 +#define DDR0_22_DQS_OUT_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16) +#define DDR0_22_DQS_OUT_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>16)&0x7F) +#define DDR0_22_DQS_OUT_SHIFT_MASK 0x00007F00 +#define DDR0_22_DQS_OUT_SHIFT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_22_DQS_OUT_SHIFT_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) +#define DDR0_22_DLL_DQS_BYPASS_8_MASK 0x0000007F +#define DDR0_22_DLL_DQS_BYPASS_8_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_22_DLL_DQS_BYPASS_8_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + + +#define DDR0_23 0x17 +#define DDR0_23_ODT_RD_MAP_CS0_MASK 0x03000000 +#define DDR0_23_ODT_RD_MAP_CS0_ENCODE(n) ((((unsigned long)(n))&0x3)<<24) +#define DDR0_23_ODT_RD_MAP_CS0_DECODE(n) ((((unsigned long)(n))>>24)&0x3) +#define DDR0_23_ECC_C_SYND_MASK 0x00FF0000 /* Read only */ +#define DDR0_23_ECC_C_SYND_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16) +#define DDR0_23_ECC_C_SYND_DECODE(n) ((((unsigned long)(n))>>16)&0xFF) +#define DDR0_23_ECC_U_SYND_MASK 0x0000FF00 /* Read only */ +#define DDR0_23_ECC_U_SYND_ENCODE(n) ((((unsigned long)(n))&0xFF)<<8) +#define DDR0_23_ECC_U_SYND_DECODE(n) ((((unsigned long)(n))>>8)&0xFF) +#define DDR0_23_FWC_MASK 0x00000001 /* Write only */ +#define DDR0_23_FWC_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_23_FWC_DECODE(n) ((((unsigned long)(n))>>0)&0x1) + +#define DDR0_24 0x18 +#define DDR0_24_RTT_PAD_TERMINATION_MASK 0x03000000 +#define DDR0_24_RTT_PAD_TERMINATION_ENCODE(n) ((((unsigned long)(n))&0x3)<<24) +#define DDR0_24_RTT_PAD_TERMINATION_DECODE(n) ((((unsigned long)(n))>>24)&0x3) +#define DDR0_24_ODT_WR_MAP_CS1_MASK 0x00030000 +#define DDR0_24_ODT_WR_MAP_CS1_ENCODE(n) ((((unsigned long)(n))&0x3)<<16) +#define DDR0_24_ODT_WR_MAP_CS1_DECODE(n) ((((unsigned long)(n))>>16)&0x3) +#define DDR0_24_ODT_RD_MAP_CS1_MASK 0x00000300 +#define DDR0_24_ODT_RD_MAP_CS1_ENCODE(n) ((((unsigned long)(n))&0x3)<<8) +#define DDR0_24_ODT_RD_MAP_CS1_DECODE(n) ((((unsigned long)(n))>>8)&0x3) +#define DDR0_24_ODT_WR_MAP_CS0_MASK 0x00000003 +#define DDR0_24_ODT_WR_MAP_CS0_ENCODE(n) ((((unsigned long)(n))&0x3)<<0) +#define DDR0_24_ODT_WR_MAP_CS0_DECODE(n) ((((unsigned long)(n))>>0)&0x3) + +#define DDR0_25 0x19 +#define DDR0_25_VERSION_MASK 0xFFFF0000 /* Read only */ +#define DDR0_25_VERSION_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<16) +#define DDR0_25_VERSION_DECODE(n) ((((unsigned long)(n))>>16)&0xFFFF) +#define DDR0_25_OUT_OF_RANGE_LENGTH_MASK 0x000003FF /* Read only */ +#define DDR0_25_OUT_OF_RANGE_LENGTH_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0) +#define DDR0_25_OUT_OF_RANGE_LENGTH_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF) + +#define DDR0_26 0x1A +#define DDR0_26_TRAS_MAX_MASK 0xFFFF0000 +#define DDR0_26_TRAS_MAX_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<16) +#define DDR0_26_TRAS_MAX_DECODE(n) ((((unsigned long)(n))>>16)&0xFFFF) +#define DDR0_26_TREF_MASK 0x00003FFF +#define DDR0_26_TREF_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0) +#define DDR0_26_TREF_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF) + +#define DDR0_27 0x1B +#define DDR0_27_EMRS_DATA_MASK 0x3FFF0000 +#define DDR0_27_EMRS_DATA_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<16) +#define DDR0_27_EMRS_DATA_DECODE(n) ((((unsigned long)(n))>>16)&0x3FFF) +#define DDR0_27_TINIT_MASK 0x0000FFFF +#define DDR0_27_TINIT_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<0) +#define DDR0_27_TINIT_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFF) + +#define DDR0_28 0x1C +#define DDR0_28_EMRS3_DATA_MASK 0x3FFF0000 +#define DDR0_28_EMRS3_DATA_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<16) +#define DDR0_28_EMRS3_DATA_DECODE(n) ((((unsigned long)(n))>>16)&0x3FFF) +#define DDR0_28_EMRS2_DATA_MASK 0x00003FFF +#define DDR0_28_EMRS2_DATA_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<0) +#define DDR0_28_EMRS2_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0x3FFF) + +#define DDR0_29 0x1D + +#define DDR0_30 0x1E + +#define DDR0_31 0x1F +#define DDR0_31_XOR_CHECK_BITS_MASK 0x0000FFFF +#define DDR0_31_XOR_CHECK_BITS_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<0) +#define DDR0_31_XOR_CHECK_BITS_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFF) + +#define DDR0_32 0x20 +#define DDR0_32_OUT_OF_RANGE_ADDR_MASK 0xFFFFFFFF /* Read only */ +#define DDR0_32_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0) +#define DDR0_32_OUT_OF_RANGE_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF) + +#define DDR0_33 0x21 +#define DDR0_33_OUT_OF_RANGE_ADDR_MASK 0x00000001 /* Read only */ +#define DDR0_33_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_33_OUT_OF_RANGE_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0x1) + +#define DDR0_34 0x22 +#define DDR0_34_ECC_U_ADDR_MASK 0xFFFFFFFF /* Read only */ +#define DDR0_34_ECC_U_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0) +#define DDR0_34_ECC_U_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF) + +#define DDR0_35 0x23 +#define DDR0_35_ECC_U_ADDR_MASK 0x00000001 /* Read only */ +#define DDR0_35_ECC_U_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_35_ECC_U_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0x1) + +#define DDR0_36 0x24 +#define DDR0_36_ECC_U_DATA_MASK 0xFFFFFFFF /* Read only */ +#define DDR0_36_ECC_U_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0) +#define DDR0_36_ECC_U_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF) + +#define DDR0_37 0x25 +#define DDR0_37_ECC_U_DATA_MASK 0xFFFFFFFF /* Read only */ +#define DDR0_37_ECC_U_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0) +#define DDR0_37_ECC_U_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF) + +#define DDR0_38 0x26 +#define DDR0_38_ECC_C_ADDR_MASK 0xFFFFFFFF /* Read only */ +#define DDR0_38_ECC_C_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0) +#define DDR0_38_ECC_C_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF) + +#define DDR0_39 0x27 +#define DDR0_39_ECC_C_ADDR_MASK 0x00000001 /* Read only */ +#define DDR0_39_ECC_C_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_39_ECC_C_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0x1) + +#define DDR0_40 0x28 +#define DDR0_40_ECC_C_DATA_MASK 0xFFFFFFFF /* Read only */ +#define DDR0_40_ECC_C_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0) +#define DDR0_40_ECC_C_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF) + +#define DDR0_41 0x29 +#define DDR0_41_ECC_C_DATA_MASK 0xFFFFFFFF /* Read only */ +#define DDR0_41_ECC_C_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0) +#define DDR0_41_ECC_C_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF) + +#define DDR0_42 0x2A +#define DDR0_42_ADDR_PINS_MASK 0x07000000 +#define DDR0_42_ADDR_PINS_ENCODE(n) ((((unsigned long)(n))&0x7)<<24) +#define DDR0_42_ADDR_PINS_DECODE(n) ((((unsigned long)(n))>>24)&0x7) +#define DDR0_42_CASLAT_LIN_GATE_MASK 0x0000000F +#define DDR0_42_CASLAT_LIN_GATE_ENCODE(n) ((((unsigned long)(n))&0xF)<<0) +#define DDR0_42_CASLAT_LIN_GATE_DECODE(n) ((((unsigned long)(n))>>0)&0xF) + +#define DDR0_43 0x2B +#define DDR0_43_TWR_MASK 0x07000000 +#define DDR0_43_TWR_ENCODE(n) ((((unsigned long)(n))&0x7)<<24) +#define DDR0_43_TWR_DECODE(n) ((((unsigned long)(n))>>24)&0x7) +#define DDR0_43_APREBIT_MASK 0x000F0000 +#define DDR0_43_APREBIT_ENCODE(n) ((((unsigned long)(n))&0xF)<<16) +#define DDR0_43_APREBIT_DECODE(n) ((((unsigned long)(n))>>16)&0xF) +#define DDR0_43_COLUMN_SIZE_MASK 0x00000700 +#define DDR0_43_COLUMN_SIZE_ENCODE(n) ((((unsigned long)(n))&0x7)<<8) +#define DDR0_43_COLUMN_SIZE_DECODE(n) ((((unsigned long)(n))>>8)&0x7) +#define DDR0_43_EIGHT_BANK_MODE_MASK 0x00000001 +#define DDR0_43_EIGHT_BANK_MODE_8_BANKS 0x00000001 +#define DDR0_43_EIGHT_BANK_MODE_4_BANKS 0x00000000 +#define DDR0_43_EIGHT_BANK_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_43_EIGHT_BANK_MODE_DECODE(n) ((((unsigned long)(n))>>0)&0x1) + +#define DDR0_44 0x2C +#define DDR0_44_TRCD_MASK 0x000000FF +#define DDR0_44_TRCD_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0) +#define DDR0_44_TRCD_DECODE(n) ((((unsigned long)(n))>>0)&0xFF) + +#endif /* _SPD_SDRAM_DENALI_H_ */ diff --git a/board/lwmon5/u-boot.lds b/board/lwmon5/u-boot.lds new file mode 100644 index 00000000000..a423f982858 --- /dev/null +++ b/board/lwmon5/u-boot.lds @@ -0,0 +1,145 @@ +/* + * (C) Copyright 2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + .resetvec 0xFFFFFFFC : + { + *(.resetvec) + } = 0xffff + + .bootpg 0xFFFFF000 : + { + cpu/ppc4xx/start.o (.bootpg) + } = 0xffff + + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/ppc4xx/start.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + + ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified."); + + _end = . ; + PROVIDE (end = .); +} diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h new file mode 100644 index 00000000000..e6e0f422e70 --- /dev/null +++ b/include/configs/lwmon5.h @@ -0,0 +1,437 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************ + * lwmon5.h - configuration for lwmon5 board + ***********************************************************************/ +#ifndef __CONFIG_H +#define __CONFIG_H + +/*----------------------------------------------------------------------- + * High Level Configuration Options + *----------------------------------------------------------------------*/ +#define CONFIG_LWMON5 1 /* Board is lwmon5 */ +#define CONFIG_440EPX 1 /* Specific PPC440EPx */ +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_SYS_CLK_FREQ 33300000 /* external freq to pll */ + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ +#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ + +/*----------------------------------------------------------------------- + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + *----------------------------------------------------------------------*/ +#define CFG_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Monitor */ +#define CFG_MALLOC_LEN (512 * 1024) /* Reserve 512 kB for malloc() */ + +#define CFG_BOOT_BASE_ADDR 0xf0000000 +#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ +#define CFG_FLASH_BASE 0xfc000000 /* start of FLASH */ +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_LIME_BASE_0 0xc0000000 +#define CFG_LIME_BASE_1 0xc1000000 +#define CFG_LIME_BASE_2 0xc2000000 +#define CFG_LIME_BASE_3 0xc3000000 +#define CFG_FPGA_BASE_0 0xc4000000 +#define CFG_FPGA_BASE_1 0xc4200000 +#define CFG_OCM_BASE 0xe0010000 /* ocm */ +#define CFG_PCI_BASE 0xe0000000 /* Internal PCI regs */ +#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */ +#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000 +#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000 +#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000 + +/* Don't change either of these */ +#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */ + +#define CFG_USB2D0_BASE 0xe0000100 +#define CFG_USB_DEVICE 0xe0000000 +#define CFG_USB_HOST 0xe0000400 + +/*----------------------------------------------------------------------- + * Initial RAM & stack pointer + *----------------------------------------------------------------------*/ +/* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */ +#define CFG_INIT_RAM_OCM 1 /* OCM as init ram */ +#define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */ + +#define CFG_INIT_RAM_END (4 << 10) +#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +#undef CFG_EXT_SERIAL_CLOCK /* no external clock provided */ +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SERIAL_MULTI 1 +/* define this if you want console on UART1 */ +#define CONFIG_UART1_CONSOLE 1 /* use UART1 as console */ + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +/*----------------------------------------------------------------------- + * Environment + *----------------------------------------------------------------------*/ +#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ + +/*----------------------------------------------------------------------- + * FLASH related + *----------------------------------------------------------------------*/ +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ + +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } + +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */ + +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ + +#define CFG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */ +#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +/*----------------------------------------------------------------------- + * DDR SDRAM + *----------------------------------------------------------------------*/ +#define CFG_MBYTES_SDRAM (256) /* 256MB */ +#define CFG_DDR_CACHED_ADDR 0x40000000 /* setup 2nd TLB cached here */ +#define CONFIG_DDR_DATA_EYE 1 /* use DDR2 optimization */ +#if 0 /* test-only: disable ECC for now */ +#define CONFIG_DDR_ECC 1 /* enable ECC */ +#endif + +/*----------------------------------------------------------------------- + * I2C + *----------------------------------------------------------------------*/ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +#define CFG_I2C_MULTI_EEPROMS +#define CFG_I2C_EEPROM_ADDR (0xa8>>1) +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_ENABLE +#define CFG_EEPROM_PAGE_WRITE_BITS 3 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 + +#define CONFIG_RTC_PCF8563 1 /* enable Philips PCF8563 RTC */ +#define CFG_I2C_RTC_ADDR 0x51 /* Philips PCF8563 RTC address */ + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hostname=lwmon5\0" \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate}\0"\ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "rootpath=/opt/eldk/ppc_4xxFP\0" \ + "bootfile=/tftpboot/lwmon5/uImage\0" \ + "kernel_addr=FC000000\0" \ + "ramdisk_addr=FC180000\0" \ + "load=tftp 200000 /tftpboot/${hostname}/u-boot.bin\0" \ + "update=protect off FFF80000 FFFFFFFF;era FFF80000 FFFFFFFF;" \ + "cp.b 200000 FFF80000 80000\0" \ + "upd=run load;run update\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_self" + +#if 0 +#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ +#else +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CONFIG_IBM_EMAC4_V4 1 +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_PHY_ADDR 3 /* PHY address, See schematics */ + +#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ + +#define CONFIG_HAS_ETH0 +#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ + +#define CONFIG_NET_MULTI 1 +#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ +#define CONFIG_PHY1_ADDR 1 + +/* USB */ +#ifdef CONFIG_440EPX +#define CONFIG_USB_OHCI +#define CONFIG_USB_STORAGE + +/* Comment this out to enable USB 1.1 device */ +#define USB_2_0_DEVICE + +#define CMD_USB CFG_CMD_USB +#else +#define CMD_USB 0 /* no USB on 440GRx */ +#endif /* CONFIG_440EPX */ + +/* Partitions */ +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DATE | \ + CFG_CMD_DHCP | \ + CFG_CMD_DIAG | \ + CFG_CMD_EEPROM | \ + CFG_CMD_ELF | \ + CFG_CMD_FAT | \ + CFG_CMD_I2C | \ + CFG_CMD_IRQ | \ + CFG_CMD_MII | \ + CFG_CMD_NET | \ + CFG_CMD_NFS | \ + CFG_CMD_PCI | \ + CFG_CMD_PING | \ + CFG_CMD_REGINFO | \ + CFG_CMD_SDRAM | \ + CMD_USB) + +#define CONFIG_SUPPORT_VFAT + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + +/*----------------------------------------------------------------------- + * Miscellaneous configurable options + *----------------------------------------------------------------------*/ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + +/*----------------------------------------------------------------------- + * PCI stuff + *----------------------------------------------------------------------*/ +/* General PCI */ +#define CONFIG_PCI /* include pci support */ +#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/ + +/* Board-specific PCI */ +#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ +#define CFG_PCI_TARGET_INIT +#define CFG_PCI_MASTER_INIT + +#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ +#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */ + +#define CONFIG_HW_WATCHDOG 1 /* Use external HW-Watchdog */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * External Bus Controller (EBC) Setup + *----------------------------------------------------------------------*/ +#define CFG_FLASH CFG_FLASH_BASE + +/* Memory Bank 0 (NOR-FLASH) initialization */ +#define CFG_EBC_PB0AP 0x03050200 +#define CFG_EBC_PB0CR (CFG_FLASH | 0xdc000) + +/* Memory Bank 1 (Lime) initialization */ +#define CFG_EBC_PB1AP 0x01004380 +#define CFG_EBC_PB1CR (CFG_LIME_BASE_0 | 0xdc000) + +/* Memory Bank 2 (FPGA) initialization */ +#define CFG_EBC_PB2AP 0x01004400 +#define CFG_EBC_PB2CR (CFG_FPGA_BASE_0 | 0x1c000) + +/* Memory Bank 3 (FPGA2) initialization */ +#define CFG_EBC_PB3AP 0x01004400 +#define CFG_EBC_PB3CR (CFG_FPGA_BASE_1 | 0x1c000) + +#define CFG_EBC_CFG 0xb8400000 + +/*----------------------------------------------------------------------- + * GPIO Setup + *----------------------------------------------------------------------*/ +#define CFG_GPIO_PHY1_RST 12 +#define CFG_GPIO_FLASH_WP 14 +#define CFG_GPIO_PHY0_RST 22 +#define CFG_GPIO_HUB_RST 50 +#define CFG_GPIO_WATCHDOG 58 +#define CFG_GPIO_LIME_S 59 +#define CFG_GPIO_LIME_RST 60 + +/*----------------------------------------------------------------------- + * PPC440 GPIO Configuration + */ +#define CFG_440_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \ +{ \ +/* GPIO Core 0 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO0 EBC_ADDR(7) DMA_REQ(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO1 EBC_ADDR(6) DMA_ACK(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO2 EBC_ADDR(5) DMA_EOT/TC(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO3 EBC_ADDR(4) DMA_REQ(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO4 EBC_ADDR(3) DMA_ACK(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO5 EBC_ADDR(2) DMA_EOT/TC(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO6 EBC_CS_N(1) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO7 EBC_CS_N(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 EBC_CS_N(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 EBC_CS_N(4) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 EBC_CS_N(5) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO11 EBC_BUS_ERR */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO12 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO13 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO14 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO15 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 GMCTxD(4) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 GMCTxD(5) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 GMCTxD(6) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO19 GMCTxD(7) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO20 RejectPkt0 */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO21 RejectPkt1 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO22 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO23 SCPD0 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO24 GMCTxD(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO25 GMCTxD(3) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO26 */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO27 EXT_EBC_REQ USB2D_RXERROR */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO28 USB2D_TXVALID */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO29 EBC_EXT_HDLA USB2D_PAD_SUSPNDM */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO30 EBC_EXT_ACK USB2D_XCVRSELECT*/ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO31 EBC_EXR_BUSREQ USB2D_TERMSELECT*/ \ +}, \ +{ \ +/* GPIO Core 1 */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO32 USB2D_OPMODE0 EBC_DATA(2) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO33 USB2D_OPMODE1 EBC_DATA(3) */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_0}, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N EBC_DATA(0) UART3_SIN*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_0}, /* GPIO37 UART0_RTS_N EBC_DATA(1) UART3_SOUT*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_0}, /* GPIO38 UART0_DTR_N UART1_SOUT */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N UART1_SIN */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 UIC_IRQ(0) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 UIC_IRQ(1) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 UIC_IRQ(2) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 UIC_IRQ(3) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO44 UIC_IRQ(4) DMA_ACK(1) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO45 UIC_IRQ(6) DMA_EOT/TC(1) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO46 UIC_IRQ(7) DMA_REQ(0) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO47 UIC_IRQ(8) DMA_ACK(0) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO48 UIC_IRQ(9) DMA_EOT/TC(0) */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO49 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO50 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO53 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO54 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO55 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO56 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO57 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO58 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO59 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO60 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO62 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO63 Unselect via TraceSelect Bit */ \ +} \ +} + +/*----------------------------------------------------------------------- + * Cache Configuration + *----------------------------------------------------------------------*/ +#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */ +#define CFG_CACHELINE_SIZE 32 /* ... */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif +#endif /* __CONFIG_H */ diff --git a/include/ppc440.h b/include/ppc440.h index 07f75de08e6..a7efcee7e9d 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -956,7 +956,8 @@ #define plb1_bearl (PLB_ARBITER_BASE+ 0x0C) #define plb1_bearh (PLB_ARBITER_BASE+ 0x0D) -#if defined(CONFIG_440EP) || defined(CONFIG_440GR) +#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* Pin Function Control Register 1 */ #define SDR0_PFC1 0x4101 #define SDR0_PFC1_U1ME_MASK 0x02000000 /* UART1 Mode Enable */ @@ -1103,6 +1104,8 @@ #define SDR0_PFC2_SELECT_CONFIG_5 0xC0000000 /* 2xRTBI using RGMII bridge */ #define SDR0_PFC2_SELECT_CONFIG_6 0x40000000 /* 2xSMII using ZMII bridge */ +#define SDR0_PFC4 0x4104 + /* USB2PHY0 Control Register */ #define SDR0_USB2PHY0CR 0x4103 #define SDR0_USB2PHY0CR_UTMICN_MASK 0x00100000 /* PHY UTMI interface connection */ -- cgit v1.3.1 From 8e585f02f82c17cc66cd229dbf0fd3066bbbf658 Mon Sep 17 00:00:00 2001 From: TsiChung Liew Date: Mon, 18 Jun 2007 13:50:13 -0500 Subject: Added M5329AFEE and M5329BFEE Platforms Added board/freescale/m5329evb, cpu/mcf532x, drivers/net, drivers/serial, immap_5329.h, m5329.h, mcfrtc.h, include/configs/M5329EVB.h, lib_m68k/interrupts.c, and rtc/mcfrtc.c Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c, common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h, include/asm-m68k/io.h, include/asm-m68k/mcftimer.h, include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h, include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c, lib_m68k/time.c, net/eth.c and rtc/Makefile Signed-off-by: TsiChung Liew --- CREDITS | 6 + MAKEALL | 2 +- Makefile | 14 + README | 5 + board/freescale/m5329evb/Makefile | 44 + board/freescale/m5329evb/config.mk | 25 + board/freescale/m5329evb/flash.c | 643 +++++++++++ board/freescale/m5329evb/m5329evb.c | 376 +++++++ board/freescale/m5329evb/u-boot.lds | 144 +++ common/cmd_bdinfo.c | 53 + common/cmd_mii.c | 2 +- cpu/mcf532x/Makefile | 48 + cpu/mcf532x/config.mk | 27 + cpu/mcf532x/cpu.c | 134 +++ cpu/mcf532x/cpu_init.c | 126 +++ cpu/mcf532x/speed.c | 222 ++++ cpu/mcf532x/start.S | 338 ++++++ drivers/net/Makefile | 45 + drivers/net/mcffec.c | 594 ++++++++++ drivers/serial/Makefile | 45 + drivers/serial/mcfserial.c | 126 +++ include/asm-m68k/byteorder.h | 102 +- include/asm-m68k/fec.h | 241 ++++- include/asm-m68k/immap_5329.h | 793 ++++++++++++++ include/asm-m68k/io.h | 214 +++- include/asm-m68k/m5329.h | 2023 +++++++++++++++++++++++++++++++++++ include/asm-m68k/mcfrtc.h | 108 ++ include/asm-m68k/mcftimer.h | 144 ++- include/asm-m68k/mcfuart.h | 328 ++++-- include/asm-m68k/ptrace.h | 44 +- include/asm-m68k/u-boot.h | 48 +- include/configs/M5329EVB.h | 275 +++++ lib_m68k/Makefile | 2 +- lib_m68k/board.c | 67 +- lib_m68k/interrupts.c | 118 ++ lib_m68k/time.c | 167 ++- net/eth.c | 1 + rtc/Makefile | 3 +- rtc/mcfrtc.c | 120 +++ 39 files changed, 7629 insertions(+), 188 deletions(-) mode change 100755 => 100644 MAKEALL mode change 100644 => 100755 Makefile create mode 100644 board/freescale/m5329evb/Makefile create mode 100644 board/freescale/m5329evb/config.mk create mode 100644 board/freescale/m5329evb/flash.c create mode 100644 board/freescale/m5329evb/m5329evb.c create mode 100644 board/freescale/m5329evb/u-boot.lds create mode 100644 cpu/mcf532x/Makefile create mode 100644 cpu/mcf532x/config.mk create mode 100644 cpu/mcf532x/cpu.c create mode 100644 cpu/mcf532x/cpu_init.c create mode 100644 cpu/mcf532x/speed.c create mode 100644 cpu/mcf532x/start.S create mode 100644 drivers/net/Makefile create mode 100644 drivers/net/mcffec.c create mode 100644 drivers/serial/Makefile create mode 100644 drivers/serial/mcfserial.c create mode 100644 include/asm-m68k/immap_5329.h create mode 100644 include/asm-m68k/m5329.h create mode 100644 include/asm-m68k/mcfrtc.h create mode 100644 include/configs/M5329EVB.h create mode 100644 lib_m68k/interrupts.c create mode 100644 rtc/mcfrtc.c (limited to 'Makefile') diff --git a/CREDITS b/CREDITS index 7af1b806ab0..8558a401292 100644 --- a/CREDITS +++ b/CREDITS @@ -479,3 +479,9 @@ N: Michal Simek E: monstr@monstr.eu D: Support for Microblaze, ML401, XUPV2P board W: www.monstr.eu + +N: TsiChung Liew +E: Tsi-Chung.Liew@freescale.com +D: Support for ColdFire MCF532x +W: www.freescale.com + diff --git a/MAKEALL b/MAKEALL old mode 100755 new mode 100644 index 0e4e7440937..22c6c6da293 --- a/MAKEALL +++ b/MAKEALL @@ -306,7 +306,7 @@ LIST_microblaze=" \ LIST_coldfire=" \ cobra5272 EB+MCF-EV123 EB+MCF-EV123_internal \ idmr M5271EVB M5272C3 M5282EVB \ - TASREG r5200 M5271EVB \ + TASREG r5200 M5271EVB M5329EVB \ " ######################################################################### diff --git a/Makefile b/Makefile old mode 100644 new mode 100755 index d5e220aadde..8a728a4328b --- a/Makefile +++ b/Makefile @@ -207,9 +207,11 @@ LIBS += dtt/libdtt.a LIBS += drivers/libdrivers.a LIBS += drivers/nand/libnand.a LIBS += drivers/nand_legacy/libnand_legacy.a +LIBS += drivers/net/libnet.a ifeq ($(CPU),mpc83xx) LIBS += drivers/qe/qe.a endif +LIBS += drivers/serial/libserial.a LIBS += drivers/sk98lin/libsk98lin.a LIBS += post/libpost.a post/drivers/libpostdrivers.a LIBS += $(shell if [ -d post/lib_$(ARCH) ]; then echo \ @@ -1637,6 +1639,18 @@ TASREG_config : unconfig r5200_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 r5200 +M5329AFEE_config \ +M5329BFEE_config : unconfig + @case "$@" in \ + M5329AFEE_config) NAND=0;; \ + M5329BFEE_config) NAND=16;; \ + esac; \ + >include/config.h ; \ + if [ "$${NAND}" != "0" ] ; then \ + echo "#define NANDFLASH_SIZE $${NAND}" >> include/config.h ; \ + fi + @$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale + ######################################################################### ## MPC83xx Systems ######################################################################### diff --git a/README b/README index bb5b46e3379..dd12cd7ee5a 100644 --- a/README +++ b/README @@ -136,6 +136,7 @@ Directory Hierarchy: - i386 Files specific to i386 CPUs - ixp Files specific to Intel XScale IXP CPUs - mcf52x2 Files specific to Freescale ColdFire MCF52x2 CPUs + - mcf532x Files specific to Freescale ColdFire MCF5329 CPUs - mips Files specific to MIPS CPUs - mpc5xx Files specific to Freescale MPC5xx CPUs - mpc5xxx Files specific to Freescale MPC5xxx CPUs @@ -251,6 +252,10 @@ The following options need to be configured: CONFIG_PXA250 CONFIG_CPU_MONAHANS + ColdFire based CPUs: + -------------------- + CONFIG_M5329 + MicroBlaze based CPUs: ---------------------- CONFIG_MICROBLAZE diff --git a/board/freescale/m5329evb/Makefile b/board/freescale/m5329evb/Makefile new file mode 100644 index 00000000000..f94ee9d1391 --- /dev/null +++ b/board/freescale/m5329evb/Makefile @@ -0,0 +1,44 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o flash.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/m5329evb/config.mk b/board/freescale/m5329evb/config.mk new file mode 100644 index 00000000000..ce014edca8f --- /dev/null +++ b/board/freescale/m5329evb/config.mk @@ -0,0 +1,25 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Coldfire contribution by Bernhard Kuhn +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0 diff --git a/board/freescale/m5329evb/flash.c b/board/freescale/m5329evb/flash.c new file mode 100644 index 00000000000..7d3b0e84d22 --- /dev/null +++ b/board/freescale/m5329evb/flash.c @@ -0,0 +1,643 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +#ifndef CFG_FLASH_CFI + +typedef unsigned short FLASH_PORT_WIDTH; +typedef volatile unsigned short FLASH_PORT_WIDTHV; + +#define PHYS_FLASH_1 CFG_FLASH_BASE +#define FLASH_BANK_SIZE 0x200000 + +#define FPW FLASH_PORT_WIDTH +#define FPWV FLASH_PORT_WIDTHV + +/* Intel-compatible flash commands */ +#define INTEL_PROGRAM 0x00100010 +#define INTEL_ERASE 0x00200020 +#define INTEL_WRSETUP 0x00400040 +#define INTEL_CLEAR 0x00500050 +#define INTEL_LOCKBIT 0x00600060 +#define INTEL_PROTECT 0x00010001 +#define INTEL_STATUS 0x00700070 +#define INTEL_READID 0x00900090 +#define INTEL_CFIQRY 0x00980098 +#define INTEL_SUSERASE 0x00B000B0 +#define INTEL_PROTPROG 0x00C000C0 +#define INTEL_CONFIRM 0x00D000D0 +#define INTEL_RESET 0x00FF00FF + +/* Intel-compatible flash status bits */ +#define INTEL_FINISHED 0x00800080 +#define INTEL_OK 0x00800080 +#define INTEL_ERASESUS 0x00600060 +#define INTEL_WSM_SUS (INTEL_FINISHED | INTEL_ERASESUS) + +/* 28F160C3B CFI Data offset - This could vary */ +#define INTEL_CFI_MFG 0x00 /* Manufacturer ID */ +#define INTEL_CFI_PART 0x01 /* Product ID */ +#define INTEL_CFI_LOCK 0x02 /* */ +#define INTEL_CFI_TWPRG 0x1F /* Typical Single Word Program Timeout 2^n us */ +#define INTEL_CFI_MBUFW 0x20 /* Typical Max Buffer Write Timeout 2^n us */ +#define INTEL_CFI_TERB 0x21 /* Typical Block Erase Timeout 2^n ms */ +#define INTEL_CFI_MWPRG 0x23 /* Maximum Word program timeout 2^n us */ +#define INTEL_CFI_MERB 0x25 /* Maximum Block Erase Timeout 2^n s */ +#define INTEL_CFI_SIZE 0x27 /* Device size 2^n bytes */ +#define INTEL_CFI_BANK 0x2C /* Number of Bank */ +#define INTEL_CFI_SZ1A 0x2F /* Block Region Size */ +#define INTEL_CFI_SZ1B 0x30 +#define INTEL_CFI_SZ2A 0x33 +#define INTEL_CFI_SZ2B 0x34 +#define INTEL_CFI_BLK1 0x2D /* Number of Blocks */ +#define INTEL_CFI_BLK2 0x31 + +#define WR_BLOCK 0x20 + +#define SYNC __asm__("nop") + +/*----------------------------------------------------------------------- + * Functions + */ + +ulong flash_get_size(FPWV * addr, flash_info_t * info); +int flash_get_offsets(ulong base, flash_info_t * info); +int flash_cmd_rd(FPWV * addr, int index); +int write_data(flash_info_t * info, ulong dest, FPW data); +void flash_sync_real_protect(flash_info_t * info); +uchar intel_sector_protected(flash_info_t * info, ushort sector); + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; + +ulong flash_init(void) +{ + FPWV *flash_addr[CFG_MAX_FLASH_BANKS]; + ulong size; + int i; + + flash_addr[0] = (FPW *) CFG_FLASH0_BASE; +#ifdef CFG_FLASH1_BASE + flash_addr[1] = (FPW *) CFG_FLASH1_BASE; +#endif + + for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { + memset(&flash_info[i], 0, sizeof(flash_info_t)); + + size = flash_get_size(flash_addr[i], &flash_info[i]); + flash_protect(FLAG_PROTECT_CLEAR, + flash_info[i].start[0], + flash_info[i].start[0] + size - 1, + &flash_info[0]); + /* get the h/w and s/w protection status in sync */ + flash_sync_real_protect(&flash_info[i]); + } + + /* Protect monitor and environment sectors */ + flash_protect(FLAG_PROTECT_SET, + CFG_MONITOR_BASE, + CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]); + + return size; +} + +void flash_print_info(flash_info_t * info) +{ + int i; + + switch (info->flash_id & FLASH_VENDMASK) { + case FLASH_MAN_INTEL: + printf("INTEL "); + break; + default: + printf("Unknown Vendor "); + break; + } + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_28F160C3B: + printf("28F160C3B\n"); + break; + case FLASH_28F160C3T: + printf("28F160C3T\n"); + break; + case FLASH_28F320C3B: + printf("28F320C3B\n"); + break; + case FLASH_28F320C3T: + printf("28F320C3T\n"); + break; + case FLASH_28F640C3B: + printf("28F640C3B\n"); + break; + case FLASH_28F640C3T: + printf("28F640C3T\n"); + break; + default: + printf("Unknown Chip Type\n"); + return; + } + + if (info->size > 0x100000) { + int remainder; + + printf(" Size: %ld", info->size >> 20); + + remainder = (info->size % 0x100000); + if (remainder) { + remainder >>= 10; + remainder = (int)((float) + (((float)remainder / (float)1024) * + 10000)); + printf(".%d ", remainder); + } + + printf("MB in %d Sectors\n", info->sector_count); + } else + printf(" Size: %ld KB in %d Sectors\n", + info->size >> 10, info->sector_count); + + printf(" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; ++i) { + if ((i % 5) == 0) + printf("\n "); + printf(" %08lX%s", + info->start[i], info->protect[i] ? " (RO)" : " "); + } + printf("\n"); +} + +/* + * The following code cannot be run from FLASH! + */ +ulong flash_get_size(FPWV * addr, flash_info_t * info) +{ + int intel = 0; + u16 value; + static int bank = 0; + + /* Write auto select command: read Manufacturer ID */ + /* Write auto select command sequence and test FLASH answer */ + *addr = (FPW) INTEL_RESET; /* restore read mode */ + *addr = (FPW) INTEL_READID; + + switch (addr[INTEL_CFI_MFG] & 0xff) { + case (ushort) INTEL_MANUFACT: + info->flash_id = FLASH_MAN_INTEL; + value = addr[INTEL_CFI_PART]; + intel = 1; + break; + default: + printf("Unknown Flash\n"); + info->flash_id = FLASH_UNKNOWN; + info->sector_count = 0; + info->size = 0; + *addr = (FPW) INTEL_RESET; /* restore read mode */ + return (0); /* no or unknown flash */ + } + + switch (value) { + case (u16) INTEL_ID_28F160C3B: + info->flash_id += FLASH_28F160C3B; + break; + case (u16) INTEL_ID_28F160C3T: + info->flash_id += FLASH_28F160C3T; + break; + case (u16) INTEL_ID_28F320C3B: + info->flash_id += FLASH_28F320C3B; + break; + case (u16) INTEL_ID_28F320C3T: + info->flash_id += FLASH_28F320C3T; + break; + case (u16) INTEL_ID_28F640C3B: + info->flash_id += FLASH_28F640C3B; + break; + case (u16) INTEL_ID_28F640C3T: + info->flash_id += FLASH_28F640C3T; + break; + default: + info->flash_id = FLASH_UNKNOWN; + break; + } + + if (intel) { + /* Intel spec. under CFI section */ + u32 sz, size, offset; + int sec, sectors, bs; + int part, i, j, cnt; + + part = flash_cmd_rd(addr, INTEL_CFI_BANK); + + /* Geometry y1 = y1 + 1, y2 = y2 + 1, CFI spec. + * To be exact, Z = [0x2f 0x30] (LE) * 256 bytes * [0x2D 0x2E] block count + * Z = [0x33 0x34] (LE) * 256 bytes * [0x31 0x32] block count + */ + offset = (u32) addr; + sectors = sec = 0; + size = sz = cnt = 0; + for (i = 0; i < part; i++) { + bs = (((addr[INTEL_CFI_SZ1B + i * 4] << 8) | + addr[INTEL_CFI_SZ1A + i * 4]) * 0x100); + sec = addr[INTEL_CFI_BLK1 + i * 4] + 1; + sz = bs * sec; + + for (j = 0; j < sec; j++) { + info->start[cnt++] = offset; + offset += bs; + } + + sectors += sec; + size += sz; + } + info->sector_count = sectors; + info->size = size; + } + + if (info->sector_count > CFG_MAX_FLASH_SECT) { + printf("** ERROR: sector count %d > max (%d) **\n", + info->sector_count, CFG_MAX_FLASH_SECT); + info->sector_count = CFG_MAX_FLASH_SECT; + } + + *addr = (FPW) INTEL_RESET; /* restore read mode */ + + return (info->size); +} + +int flash_cmd_rd(FPWV * addr, int index) +{ + return (int)addr[index]; +} + +/* + * This function gets the u-boot flash sector protection status + * (flash_info_t.protect[]) in sync with the sector protection + * status stored in hardware. + */ +void flash_sync_real_protect(flash_info_t * info) +{ + int i; + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_28F160C3B: + case FLASH_28F160C3T: + case FLASH_28F320C3B: + case FLASH_28F320C3T: + case FLASH_28F640C3B: + case FLASH_28F640C3T: + for (i = 0; i < info->sector_count; ++i) { + info->protect[i] = intel_sector_protected(info, i); + } + break; + default: + /* no h/w protect support */ + break; + } +} + +/* + * checks if "sector" in bank "info" is protected. Should work on intel + * strata flash chips 28FxxxJ3x in 8-bit mode. + * Returns 1 if sector is protected (or timed-out while trying to read + * protection status), 0 if it is not. + */ +uchar intel_sector_protected(flash_info_t * info, ushort sector) +{ + FPWV *addr; + FPWV *lock_conf_addr; + ulong start; + unsigned char ret; + + /* + * first, wait for the WSM to be finished. The rationale for + * waiting for the WSM to become idle for at most + * CFG_FLASH_ERASE_TOUT is as follows. The WSM can be busy + * because of: (1) erase, (2) program or (3) lock bit + * configuration. So we just wait for the longest timeout of + * the (1)-(3), i.e. the erase timeout. + */ + + /* wait at least 35ns (W12) before issuing Read Status Register */ + /*udelay(1); */ + addr = (FPWV *) info->start[sector]; + *addr = (FPW) INTEL_STATUS; + + start = get_timer(0); + while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) { + if (get_timer(start) > CFG_FLASH_UNLOCK_TOUT) { + *addr = (FPW) INTEL_RESET; /* restore read mode */ + printf("WSM busy too long, can't get prot status\n"); + return 1; + } + } + + /* issue the Read Identifier Codes command */ + *addr = (FPW) INTEL_READID; + + /* Intel example code uses offset of 4 for 8-bit flash */ + lock_conf_addr = (FPWV *) info->start[sector]; + ret = (lock_conf_addr[INTEL_CFI_LOCK] & (FPW) INTEL_PROTECT) ? 1 : 0; + + /* put flash back in read mode */ + *addr = (FPW) INTEL_RESET; + + return ret; +} + +int flash_erase(flash_info_t * info, int s_first, int s_last) +{ + int flag, prot, sect; + ulong type, start, last; + int rcode = 0; + + if ((s_first < 0) || (s_first > s_last)) { + if (info->flash_id == FLASH_UNKNOWN) + printf("- missing\n"); + else + printf("- no sectors to erase\n"); + return 1; + } + + type = (info->flash_id & FLASH_VENDMASK); + if ((type != FLASH_MAN_INTEL)) { + type = (info->flash_id & FLASH_VENDMASK); + printf("Can't erase unknown flash type %08lx - aborted\n", + info->flash_id); + return 1; + } + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + + if (prot) + printf("- Warning: %d protected sectors will not be erased!\n", + prot); + else + printf("\n"); + + start = get_timer(0); + last = start; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect <= s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + + FPWV *addr = (FPWV *) (info->start[sect]); + int min = 0; + + printf("Erasing sector %2d ... ", sect); + + /* arm simple, non interrupt dependent timer */ + start = get_timer(0); + + *addr = (FPW) INTEL_READID; + min = addr[INTEL_CFI_TERB]; + min = 1 << min; /* ms */ + min = (min / info->sector_count) * 1000; + + /* start erase block */ + *addr = (FPW) INTEL_CLEAR; /* clear status register */ + *addr = (FPW) INTEL_ERASE; /* erase setup */ + *addr = (FPW) INTEL_CONFIRM; /* erase confirm */ + + while ((*addr & (FPW) INTEL_FINISHED) != + (FPW) INTEL_FINISHED) { + + if (get_timer(start) > CFG_FLASH_ERASE_TOUT) { + printf("Timeout\n"); + *addr = (FPW) INTEL_SUSERASE; /* suspend erase */ + *addr = (FPW) INTEL_RESET; /* reset to read mode */ + + rcode = 1; + break; + } + } + + *addr = (FPW) INTEL_RESET; /* resest to read mode */ + + printf(" done\n"); + } + } + + return rcode; +} + +int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) +{ + if (info->flash_id == FLASH_UNKNOWN) + return 4; + + switch (info->flash_id & FLASH_VENDMASK) { + case FLASH_MAN_INTEL: + { + ulong cp, wp; + FPW data; + int i, l, rc, port_width; + + /* get lower word aligned address */ + wp = addr; + port_width = 1; + + /* + * handle unaligned start bytes + */ + if ((l = addr - wp) != 0) { + data = 0; + for (i = 0, cp = wp; i < l; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + + for (; i < port_width && cnt > 0; ++i) { + data = (data << 8) | *src++; + --cnt; + ++cp; + } + + for (; cnt == 0 && i < port_width; ++i, ++cp) + data = (data << 8) | (*(uchar *) cp); + + if ((rc = write_data(info, wp, data)) != 0) + return (rc); + + wp += port_width; + } + + /* handle word aligned part */ + while (cnt >= 2) { + data = *((FPW *) src); + + if ((rc = + write_data(info, (ulong) ((FPWV *) wp), + (FPW) data)) != 0) { + return (rc); + } + + src += sizeof(FPW); + wp += sizeof(FPW); + cnt -= sizeof(FPW); + } + + if (cnt == 0) + return ERR_OK; + + /* + * handle unaligned tail bytes + */ + data = 0; + for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) { + data = (data >> 8) | (*src++ << 8); + --cnt; + } + for (; i < 2; ++i, ++cp) { + data |= (*(uchar *) cp); + } + + return write_data(info, (ulong) ((FPWV *) wp), + (FPW) data); + + } /* case FLASH_MAN_INTEL */ + + } /* switch */ + + return ERR_OK; +} + +/*----------------------------------------------------------------------- + * Write a word or halfword to Flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +int write_data(flash_info_t * info, ulong dest, FPW data) +{ + FPWV *addr = (FPWV *) dest; + ulong start; + int flag; + + /* Check if Flash is (sufficiently) erased */ + if ((*addr & data) != data) { + printf("not erased at %08lx (%lx)\n", (ulong) addr, + (ulong) * addr); + return (2); + } + + /* Disable interrupts which might cause a timeout here */ + flag = (int)disable_interrupts(); + + *addr = (FPW) INTEL_CLEAR; + *addr = (FPW) INTEL_RESET; + + *addr = (FPW) INTEL_WRSETUP; /* write setup */ + *addr = data; + + /* arm simple, non interrupt dependent timer */ + start = get_timer(0); + + /* wait while polling the status register */ + while ((*addr & (FPW) INTEL_OK) != (FPW) INTEL_OK) { + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + *addr = (FPW) INTEL_SUSERASE; /* suspend mode */ + *addr = (FPW) INTEL_CLEAR; /* clear status */ + *addr = (FPW) INTEL_RESET; /* reset */ + return (1); + } + } + + *addr = (FPW) INTEL_CLEAR; /* clear status */ + *addr = (FPW) INTEL_RESET; /* restore read mode */ + + return (0); +} + +#ifdef CFG_FLASH_PROTECTION +/*----------------------------------------------------------------------- + */ +int flash_real_protect(flash_info_t * info, long sector, int prot) +{ + int rcode = 0; /* assume success */ + FPWV *addr; /* address of sector */ + FPW value; + + addr = (FPWV *) (info->start[sector]); + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_28F160C3B: + case FLASH_28F160C3T: + case FLASH_28F320C3B: + case FLASH_28F320C3T: + case FLASH_28F640C3B: + case FLASH_28F640C3T: + *addr = (FPW) INTEL_RESET; /* make sure in read mode */ + *addr = (FPW) INTEL_LOCKBIT; /* lock command setup */ + + if (prot) + *addr = (FPW) INTEL_PROTECT; /* lock sector */ + else + *addr = (FPW) INTEL_CONFIRM; /* unlock sector */ + + /* now see if it really is locked/unlocked as requested */ + *addr = (FPW) INTEL_READID; + + /* read sector protection at sector address, (A7 .. A0) = 0x02. + * D0 = 1 for each device if protected. + * If at least one device is protected the sector is marked + * protected, but return failure. Mixed protected and + * unprotected devices within a sector should never happen. + */ + value = addr[2] & (FPW) INTEL_PROTECT; + if (value == 0) + info->protect[sector] = 0; + else if (value == (FPW) INTEL_PROTECT) + info->protect[sector] = 1; + else { + /* error, mixed protected and unprotected */ + rcode = 1; + info->protect[sector] = 1; + } + if (info->protect[sector] != prot) + rcode = 1; /* failed to protect/unprotect as requested */ + + /* reload all protection bits from hardware for now */ + flash_sync_real_protect(info); + break; + + default: + /* no hardware protect that we support */ + info->protect[sector] = prot; + break; + } + + return rcode; +} +#endif /* CFG_FLASH_PROTECTION */ +#endif /* CFG_FLASH_CFI */ diff --git a/board/freescale/m5329evb/m5329evb.c b/board/freescale/m5329evb/m5329evb.c new file mode 100644 index 00000000000..4ccea30d61d --- /dev/null +++ b/board/freescale/m5329evb/m5329evb.c @@ -0,0 +1,376 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +int checkboard(void) +{ + puts("Board: "); + puts("Freescale FireEngine 5329 EVB\n"); + return 0; +}; + +long int initdram(int board_type) +{ + volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM); + u32 dramsize, i; + + dramsize = CFG_SDRAM_SIZE * 0x100000; + + for (i = 0x13; i < 0x20; i++) { + if (dramsize == (1 << i)) + break; + } + i--; + + sdram->cs0 = (CFG_SDRAM_BASE | i); + sdram->cfg1 = CFG_SDRAM_CFG1; + sdram->cfg2 = CFG_SDRAM_CFG2; + + /* Issue PALL */ + sdram->ctrl = CFG_SDRAM_CTRL | 2; + + /* Issue LEMR */ + sdram->mode = CFG_SDRAM_EMOD; + sdram->mode = (CFG_SDRAM_MODE | 0x04000000); + + udelay(500); + + /* Issue PALL */ + sdram->ctrl = (CFG_SDRAM_CTRL | 2); + + /* Perform two refresh cycles */ + sdram->ctrl = CFG_SDRAM_CTRL | 4; + sdram->ctrl = CFG_SDRAM_CTRL | 4; + + sdram->mode = CFG_SDRAM_MODE; + + sdram->ctrl = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000c00; + + udelay(100); + + return dramsize; +}; + +int testdram(void) +{ + /* TODO: XXX XXX XXX */ + printf("DRAM test not implemented!\n"); + + return (0); +} + +#ifdef CFG_FLASH_CFI +void sync(void) +{ + /* This sync function is PowerPC intruction, + coldfire does not have this instruction. Dummy function */ +} +#endif + +#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) +#undef MII_DEBUG +#undef ET_DEBUG + +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + if (setclear) { + gpio->par_fec |= GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC; + gpio->par_feci2c |= + GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO; + } else { + gpio->par_fec &= ~(GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC); + gpio->par_feci2c &= + ~(GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO); + } + return 0; +} + +#if defined(CFG_DISCOVER_PHY) || (CONFIG_COMMANDS & CFG_CMD_MII) +#include + +/* Make MII read/write commands for the FEC. */ +#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | \ + (REG & 0x1f) << 18)) + +#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | \ + (REG & 0x1f) << 18) | \ + (VAL & 0xffff)) + +/* PHY identification */ +#define PHY_ID_LXT970 0x78100000 /* LXT970 */ +#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ +#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ +#define PHY_ID_QS6612 0x01814400 /* QS6612 */ +#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ +#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ +#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ +#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ +#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ + +#define STR_ID_LXT970 "LXT970" +#define STR_ID_LXT971 "LXT971" +#define STR_ID_82555 "Intel82555" +#define STR_ID_QS6612 "QS6612" +#define STR_ID_AMD79C784 "AMD79C784" +#define STR_ID_LSI80225 "LSI80225" +#define STR_ID_LSI80225B "LSI80225/B" +#define STR_ID_DP83848VV "N83848" +#define STR_ID_DP83849 "N83849" + +/**************************************************************************** + * mii_init -- Initialize the MII for MII command without ethernet + * This function is a subset of eth_init + **************************************************************************** + */ +void mii_reset(struct fec_info_s *info) +{ + volatile fec_t *fecp = (fec_t *) (info->miibase); + int i; + + fecp->ecr = FEC_ECR_RESET; + for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { + udelay(1); + } + if (i == FEC_RESET_DELAY) { + printf("FEC_RESET_DELAY timeout\n"); + } +} + +/* send command to phy using mii, wait for result */ +uint mii_send(uint mii_cmd) +{ + struct fec_info_s *info; + struct eth_device *dev; + volatile fec_t *ep; + uint mii_reply; + int j = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + ep = (fec_t *) info->miibase; + + ep->mmfr = mii_cmd; /* command to phy */ + + /* wait for mii complete */ + while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { + udelay(1); + j++; + } + if (j >= MCFFEC_TOUT_LOOP) { + printf("MII not complete\n"); + return -1; + } + + mii_reply = ep->mmfr; /* result from phy */ + ep->eir = FEC_EIR_MII; /* clear MII complete */ +#ifdef ET_DEBUG + printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", + __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); +#endif + + return (mii_reply & 0xffff); /* data read from phy */ +} +#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CFG_CMD_MII) */ + +#if defined(CFG_DISCOVER_PHY) +int mii_discover_phy(struct eth_device *dev) +{ +#define MAX_PHY_PASSES 11 + struct fec_info_s *info = dev->priv; + int phyaddr, pass; + uint phyno, phytype; + + if (info->phyname_init) + return info->phy_addr; + + phyaddr = -1; /* didn't find a PHY yet */ + for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { + if (pass > 1) { + /* PHY may need more time to recover from reset. + * The LXT970 needs 50ms typical, no maximum is + * specified, so wait 10ms before try again. + * With 11 passes this gives it 100ms to wake up. + */ + udelay(10000); /* wait 10ms */ + } + + for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { + + phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); +#ifdef ET_DEBUG + printf("PHY type 0x%x pass %d type\n", phytype, pass); +#endif + if (phytype != 0xffff) { + phyaddr = phyno; + phytype <<= 16; + phytype |= + mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); + + switch (phytype & 0xffffffff) { + case PHY_ID_DP83848VV: + strcpy(info->phy_name, + STR_ID_DP83848VV); + info->phyname_init = 1; + break; + default: + strcpy(info->phy_name, "unknown"); + info->phyname_init = 1; + break; + } + +#ifdef ET_DEBUG + printf("PHY @ 0x%x pass %d type ", phyno, pass); + switch (phytype & 0xffffffff) { + case PHY_ID_DP83848VV: + printf(STR_ID_DP83848VV); + break; + default: + printf("0x%08x\n", phytype); + break; + } +#endif + } + } + } + if (phyaddr < 0) + printf("No PHY device found.\n"); + + return phyaddr; +} +#endif /* CFG_DISCOVER_PHY */ + +void mii_init(void) +{ + volatile fec_t *fecp; + struct fec_info_s *info; + struct eth_device *dev; + int miispd = 0, i = 0; + u16 autoneg = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + fecp = (fec_t *) info->miibase; + + fecpin_setclear(dev, 1); + + mii_reset(info); + + /* We use strictly polling mode only */ + fecp->eimr = 0; + + /* Clear any pending interrupt */ + fecp->eir = 0xffffffff; + + /* Set MII speed */ + miispd = (gd->bus_clk / 1000000) / 5; + fecp->mscr = miispd << 1; + + info->phy_addr = mii_discover_phy(dev); + +#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) + while (i < MCFFEC_TOUT_LOOP) { + autoneg = 0; + miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); + i++; + + if ((autoneg & AUTONEGLINK) == AUTONEGLINK) + break; + + udelay(500); + } + if (i >= MCFFEC_TOUT_LOOP) { + printf("Auto Negotiation not complete\n"); + } + + /* adapt to the half/full speed settings */ + info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; + info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); +} + +/***************************************************************************** + * Read and write a MII PHY register, routines used by MII Utilities + * + * FIXME: These routines are expected to return 0 on success, but mii_send + * does _not_ return an error code. Maybe 0xFFFF means error, i.e. + * no PHY connected... + * For now always return 0. + * FIXME: These routines only work after calling eth_init() at least once! + * Otherwise they hang in mii_send() !!! Sorry! + *****************************************************************************/ + +int mcffec_miiphy_read(char *devname, unsigned char addr, + unsigned char reg, unsigned short *value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); +#endif + rdreg = mii_send(mk_mii_read(addr, reg)); + + *value = rdreg; + +#ifdef MII_DEBUG + printf("0x%04x\n", *value); +#endif + + return 0; +} + +int mcffec_miiphy_write(char *devname, unsigned char addr, + unsigned char reg, unsigned short value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); +#endif + + rdreg = mii_send(mk_mii_write(addr, reg, value)); + +#ifdef MII_DEBUG + printf("0x%04x\n", value); +#endif + + return 0; +} + +#endif /* CFG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m5329evb/u-boot.lds b/board/freescale/m5329evb/u-boot.lds new file mode 100644 index 00000000000..9b994a09db8 --- /dev/null +++ b/board/freescale/m5329evb/u-boot.lds @@ -0,0 +1,144 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mcf532x/start.o (.text) + lib_m68k/traps.o (.text) + lib_m68k/interrupts.o (.text) + common/dlmalloc.o (.text) + lib_generic/zlib.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + __got_start = .; + *(.got) + __got_end = .; + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + _sbss = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + _end = . ; + PROVIDE (end = .); +} diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index d97c09e88ee..9651b309740 100644 --- a/common/cmd_bdinfo.c +++ b/common/cmd_bdinfo.c @@ -207,6 +207,59 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return 0; } +#elif defined(CONFIG_M68K) /* M68K */ + +int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + int i; + bd_t *bd = gd->bd; + print_num ("memstart", (ulong)bd->bi_memstart); + print_num ("memsize", (ulong)bd->bi_memsize); + print_num ("flashstart", (ulong)bd->bi_flashstart); + print_num ("flashsize", (ulong)bd->bi_flashsize); + print_num ("flashoffset", (ulong)bd->bi_flashoffset); +#if defined(CFG_INIT_RAM_ADDR) + print_num ("sramstart", (ulong)bd->bi_sramstart); + print_num ("sramsize", (ulong)bd->bi_sramsize); +#endif +#if defined(CFG_MBAR) + print_num ("mbar", bd->bi_mbar_base ); +#endif +#if defined(CFG_CMD_NET) + puts ("ethaddr ="); + for (i=0; i<6; ++i) { + printf ("%c%02X", i ? ':' : ' ', bd->bi_enetaddr[i]); + } + +#if defined(CONFIG_HAS_ETH1) + puts ("\neth1addr ="); + for (i=0; i<6; ++i) { + printf ("%c%02X", i ? ':' : ' ', bd->bi_enet1addr[i]); + } +#endif + +#if defined(CONFIG_HAS_ETH2) + puts ("\neth2addr ="); + for (i=0; i<6; ++i) { + printf ("%c%02X", i ? ':' : ' ', bd->bi_enet2addr[i]); + } +#endif + +#if defined(CONFIG_HAS_ETH3) + puts ("\neth3addr ="); + for (i=0; i<6; ++i) { + printf ("%c%02X", i ? ':' : ' ', bd->bi_enet3addr[i]); + } +#endif + + puts ("\nip_addr = "); + print_IPaddr (bd->bi_ip_addr); +#endif /* CFG_CMD_NET */ + printf ("\nbaudrate = %d bps\n", bd->bi_baudrate); + + return 0; +} + #else /* ! PPC, which leaves MIPS */ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) diff --git a/common/cmd_mii.c b/common/cmd_mii.c index e6595360cbe..c3f43d7f463 100644 --- a/common/cmd_mii.c +++ b/common/cmd_mii.c @@ -438,7 +438,7 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) int rcode = 0; char *devname; -#ifdef CONFIG_8xx +#if defined(CONFIG_8xx) || defined(CONFIG_MCF532x) mii_init (); #endif diff --git a/cpu/mcf532x/Makefile b/cpu/mcf532x/Makefile new file mode 100644 index 00000000000..452848d32ad --- /dev/null +++ b/cpu/mcf532x/Makefile @@ -0,0 +1,48 @@ +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +# CFLAGS += -DET_DEBUG + +LIB = lib$(CPU).a + +START = +COBJS = cpu.o speed.o cpu_init.o + +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/cpu/mcf532x/config.mk b/cpu/mcf532x/config.mk new file mode 100644 index 00000000000..ba324a894a5 --- /dev/null +++ b/cpu/mcf532x/config.mk @@ -0,0 +1,27 @@ +# +# (C) Copyright 2003 Josef Baumgartner +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +PLATFORM_RELFLAGS += -ffixed-d7 -msep-data +PLATFORM_CPPFLAGS += -m5307 -fPIC diff --git a/cpu/mcf532x/cpu.c b/cpu/mcf532x/cpu.c new file mode 100644 index 00000000000..071c5030477 --- /dev/null +++ b/cpu/mcf532x/cpu.c @@ -0,0 +1,134 @@ +/* + * + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include +#include + +int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[]) +{ + volatile wdog_t *wdp = (wdog_t *) (MMAP_WDOG); + + wdp->cr = 0; + udelay(1000); + + /* enable watchdog, set timeout to 0 and wait */ + wdp->cr = WTM_WCR_EN; + while (1) ; + + /* we don't return! */ + return 0; +}; + +int checkcpu(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + volatile ccm_t *ccm = (ccm_t *) MMAP_CCM; + u16 msk; + u16 id = 0; + u8 ver; + + puts("CPU: "); + msk = (ccm->cir >> 6); + ver = (ccm->cir & 0x003f); + switch (msk) { + case 0x54: + id = 5329; + break; + case 0x59: + id = 5328; + break; + case 0x61: + id = 5327; + break; + } + + if (id) { + printf("Freescale MCF%d (Mask:%01x Version:%x)\n", id, msk, + ver); + printf(" CPU CLK %d Mhz BUS CLK %d Mhz\n", + (int)(gd->cpu_clk / 1000000), + (int)(gd->bus_clk / 1000000)); + } + + return 0; +}; + +#if defined(CONFIG_WATCHDOG) +/* Called by macro WATCHDOG_RESET */ +void watchdog_reset(void) +{ + volatile wdog_t *wdp = (wdog_t *) (MMAP_WDOG); + + wdp->sr = 0x5555; /* Count register */ +} + +int watchdog_disable(void) +{ + volatile wdog_t *wdp = (wdog_t *) (MMAP_WDOG); + + /* UserManual, once the wdog is disabled, wdog cannot be re-enabled */ + wdp->cr |= WTM_WCR_HALTED; /* halted watchdog timer */ + + puts("WATCHDOG:disabled\n"); + return (0); +} + +int watchdog_init(void) +{ + volatile wdog_t *wdp = (wdog_t *) (MMAP_WDOG); + u32 wdog_module = 0; + + /* set timeout and enable watchdog */ + wdog_module = ((CFG_CLK / 1000) * CONFIG_WATCHDOG_TIMEOUT); + wdog_module |= (wdog_module / 8192); + wdp->mr = wdog_module; + + wdp->cr = WTM_WCR_EN; + puts("WATCHDOG:enabled\n"); + + return (0); +} +#endif /* #ifdef CONFIG_WATCHDOG */ + +#ifdef CONFIG_MCFINTC +int interrupt_init(void) +{ + volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE); + + /* Make sure all interrupts are disabled */ + intp->imrh0 |= 0xFFFFFFFF; + intp->imrl0 |= 0xFFFFFFFF; + + enable_interrupts(); + return 0; +} +#endif /* CONFIG_MCFINTC */ diff --git a/cpu/mcf532x/cpu_init.c b/cpu/mcf532x/cpu_init.c new file mode 100644 index 00000000000..6319658c06b --- /dev/null +++ b/cpu/mcf532x/cpu_init.c @@ -0,0 +1,126 @@ +/* + * + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2007 + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#include +#include + +/* + * Breath some life into the CPU... + * + * Set up the memory map, + * initialize a bunch of registers, + * initialize the UPM's + */ +void cpu_init_f(void) +{ + volatile scm1_t *scm1 = (scm1_t *) MMAP_SCM1; + volatile scm2_t *scm2 = (scm2_t *) MMAP_SCM2; + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; + volatile wdog_t *wdog = (wdog_t *) MMAP_WDOG; + + /* watchdog is enabled by default - disable the watchdog */ +#ifndef CONFIG_WATCHDOG + wdog->cr = 0; +#endif + + scm1->mpr0 = 0x77777777; + scm2->pacra = 0; + scm2->pacrb = 0; + scm2->pacrc = 0; + scm2->pacrd = 0; + scm2->pacre = 0; + scm2->pacrf = 0; + scm2->pacrg = 0; + scm1->pacrh = 0; + + /* Setup Ports: */ + switch (CFG_UART_PORT) { + case 0: + gpio->par_uart = (GPIO_PAR_UART_TXD0 | GPIO_PAR_UART_RXD0); + break; + case 1: + gpio->par_uart = + (GPIO_PAR_UART_TXD1(3) | GPIO_PAR_UART_RXD1(3)); + break; + case 2: + gpio->par_uart = (GPIO_PAR_TIN3_URXD2 | GPIO_PAR_TIN2_UTXD2); + break; + } + + /* Port configuration */ + gpio->par_cs = 0x3E; + +#if (defined(CFG_CS0_BASE) && defined(CFG_CS0_MASK) && defined(CFG_CS0_CTRL)) + fbcs->csar0 = CFG_CS0_BASE; + fbcs->cscr0 = CFG_CS0_CTRL; + fbcs->csmr0 = CFG_CS0_MASK; +#endif + +#if (defined(CFG_CS1_BASE) && defined(CFG_CS1_MASK) && defined(CFG_CS1_CTRL)) + /* Latch chipselect */ + fbcs->csar1 = CFG_CS1_BASE; + fbcs->cscr1 = CFG_CS1_CTRL; + fbcs->csmr1 = CFG_CS1_MASK; +#endif + +#if (defined(CFG_CS2_BASE) && defined(CFG_CS2_MASK) && defined(CFG_CS2_CTRL)) + fbcs->csar2 = CFG_CS2_BASE; + fbcs->cscr2 = CFG_CS2_CTRL; + fbcs->csmr2 = CFG_CS2_MASK; +#endif + +#if (defined(CFG_CS3_BASE) && defined(CFG_CS3_MASK) && defined(CFG_CS3_CTRL)) + fbcs->csar3 = CFG_CS3_BASE; + fbcs->cscr3 = CFG_CS3_CTRL; + fbcs->csmr3 = CFG_CS3_MASK; +#endif + +#if (defined(CFG_CS4_BASE) && defined(CFG_CS4_MASK) && defined(CFG_CS4_CTRL)) + fbcs->csar4 = CFG_CS4_BASE; + fbcs->cscr4 = CFG_CS4_CTRL; + fbcs->csmr4 = CFG_CS4_MASK; +#endif + +#if (defined(CFG_CS5_BASE) && defined(CFG_CS5_MASK) && defined(CFG_CS5_CTRL)) + fbcs->csar5 = CFG_CS5_BASE; + fbcs->cscr5 = CFG_CS5_CTRL; + fbcs->csmr5 = CFG_CS5_MASK; +#endif +} + +/* + * initialize higher level parts of CPU like timers + */ +int cpu_init_r(void) +{ + /*icache_enable(); */ + return (0); +} diff --git a/cpu/mcf532x/speed.c b/cpu/mcf532x/speed.c new file mode 100644 index 00000000000..c4ba7ec6692 --- /dev/null +++ b/cpu/mcf532x/speed.c @@ -0,0 +1,222 @@ +/* + * + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#include +#include + +/* PLL min/max specifications */ +#define MAX_FVCO 500000 /* KHz */ +#define MAX_FSYS 80000 /* KHz */ +#define MIN_FSYS 58333 /* KHz */ +#define FREF 16000 /* KHz */ +#define MAX_MFD 135 /* Multiplier */ +#define MIN_MFD 88 /* Multiplier */ +#define BUSDIV 6 /* Divider */ +/* + * Low Power Divider specifications + */ +#define MIN_LPD (1 << 0) /* Divider (not encoded) */ +#define MAX_LPD (1 << 15) /* Divider (not encoded) */ +#define DEFAULT_LPD (1 << 1) /* Divider (not encoded) */ + +/* + * Get the value of the current system clock + * + * Parameters: + * none + * + * Return Value: + * The current output system frequency + */ +int get_sys_clock(void) +{ + volatile ccm_t *ccm = (volatile ccm_t *)(MMAP_CCM); + volatile pll_t *pll = (volatile pll_t *)(MMAP_PLL); + int divider; + + /* Test to see if device is in LIMP mode */ + if (ccm->misccr & CCM_MISCCR_LIMP) { + divider = ccm->cdr & CCM_CDR_LPDIV(0xF); + return (FREF / (2 << divider)); + } else { + return ((FREF * pll->pfdr) / (BUSDIV * 4)); + } +} + +/* + * Initialize the Low Power Divider circuit + * + * Parameters: + * div Desired system frequency divider + * + * Return Value: + * The resulting output system frequency + */ +int clock_limp(int div) +{ + volatile ccm_t *ccm = (volatile ccm_t *)(MMAP_CCM); + u32 temp; + + /* Check bounds of divider */ + if (div < MIN_LPD) + div = MIN_LPD; + if (div > MAX_LPD) + div = MAX_LPD; + + /* Save of the current value of the SSIDIV so we don't overwrite the value */ + temp = (ccm->cdr & CCM_CDR_SSIDIV(0xF)); + + /* Apply the divider to the system clock */ + ccm->cdr = (CCM_CDR_LPDIV(div) | CCM_CDR_SSIDIV(temp)); + + ccm->misccr |= CCM_MISCCR_LIMP; + + return (FREF / (3 * (1 << div))); +} + +/* + * Exit low power LIMP mode + * + * Parameters: + * div Desired system frequency divider + * + * Return Value: + * The resulting output system frequency + */ +int clock_exit_limp(void) +{ + volatile ccm_t *ccm = (volatile ccm_t *)(MMAP_CCM); + int fout; + + /* Exit LIMP mode */ + ccm->misccr &= (~CCM_MISCCR_LIMP); + + /* Wait for PLL to lock */ + while (!(ccm->misccr & CCM_MISCCR_PLL_LOCK)) ; + + fout = get_sys_clock(); + + return fout; +} + +/* Initialize the PLL + * + * Parameters: + * fref PLL reference clock frequency in KHz + * fsys Desired PLL output frequency in KHz + * flags Operating parameters + * + * Return Value: + * The resulting output system frequency + */ +int clock_pll(int fsys, int flags) +{ + volatile u32 *sdram_workaround = (volatile u32 *)(MMAP_SDRAM + 0x80); + volatile pll_t *pll = (volatile pll_t *)(MMAP_PLL); + int fref, temp, fout, mfd; + u32 i; + + fref = FREF; + + if (fsys == 0) { + /* Return current PLL output */ + mfd = pll->pfdr; + + return (fref * mfd / (BUSDIV * 4)); + } + + /* Check bounds of requested system clock */ + if (fsys > MAX_FSYS) + fsys = MAX_FSYS; + + if (fsys < MIN_FSYS) + fsys = MIN_FSYS; + + /* Multiplying by 100 when calculating the temp value, + and then dividing by 100 to calculate the mfd allows + for exact values without needing to include floating + point libraries. */ + temp = (100 * fsys) / fref; + mfd = (4 * BUSDIV * temp) / 100; + + /* Determine the output frequency for selected values */ + fout = ((fref * mfd) / (BUSDIV * 4)); + + /* + * Check to see if the SDRAM has already been initialized. + * If it has then the SDRAM needs to be put into self refresh + * mode before reprogramming the PLL. + */ + /* Put SDRAM into self refresh mode */ +/* if (MCF_SDRAMC_SDCR & MCF_SDRAMC_SDCR_REF) + MCF_SDRAMC_SDCR &= ~MCF_SDRAMC_SDCR_CKE;*/ + + /* + * Initialize the PLL to generate the new system clock frequency. + * The device must be put into LIMP mode to reprogram the PLL. + */ + + /* Enter LIMP mode */ + clock_limp(DEFAULT_LPD); + + /* Reprogram PLL for desired fsys */ + pll->podr = (PLL_PODR_CPUDIV(BUSDIV / 3) | PLL_PODR_BUSDIV(BUSDIV)); + + pll->pfdr = mfd; + + /* Exit LIMP mode */ + clock_exit_limp(); + + /* + * Return the SDRAM to normal operation if it is in use. + */ + /* Exit self refresh mode */ +/* if (MCF_SDRAMC_SDCR & MCF_SDRAMC_SDCR_REF) + MCF_SDRAMC_SDCR |= MCF_SDRAMC_SDCR_CKE;*/ + + /* software workaround for SDRAM opeartion after exiting LIMP mode errata */ + *sdram_workaround = CFG_SDRAM_BASE; + /* wait for DQS logic to relock */ + for (i = 0; i < 0x200; i++) ; + + return fout; +} + +/* + * get_clocks() fills in gd->cpu_clock and gd->bus_clk + */ +int get_clocks(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bus_clk = clock_pll(CFG_CLK / 1000, 0) * 1000; + gd->cpu_clk = (gd->bus_clk * 3); + return (0); +} diff --git a/cpu/mcf532x/start.S b/cpu/mcf532x/start.S new file mode 100644 index 00000000000..d36d076cf32 --- /dev/null +++ b/cpu/mcf532x/start.S @@ -0,0 +1,338 @@ +/* + * Copyright (C) 2003 Josef Baumgartner + * Based on code from Bernhard Kuhn + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include "version.h" + +#ifndef CONFIG_IDENT_STRING +#define CONFIG_IDENT_STRING "" +#endif + +#define _START _start +#define _FAULT _fault + + +#define SAVE_ALL \ + move.w #0x2700,%sr; /* disable intrs */ \ + subl #60,%sp; /* space for 15 regs */ \ + moveml %d0-%d7/%a0-%a6,%sp@; + +#define RESTORE_ALL \ + moveml %sp@,%d0-%d7/%a0-%a6; \ + addl #60,%sp; /* space for 15 regs */ \ + rte; + + +.text +/* + * Vector table. This is used for initial platform startup. + * These vectors are to catch any un-intended traps. + */ +_vectors: + +INITSP: .long 0x00000000 /* Initial SP */ +INITPC: .long _START /* Initial PC */ +vector02: .long _FAULT /* Access Error */ +vector03: .long _FAULT /* Address Error */ +vector04: .long _FAULT /* Illegal Instruction */ +vector05: .long _FAULT /* Reserved */ +vector06: .long _FAULT /* Reserved */ +vector07: .long _FAULT /* Reserved */ +vector08: .long _FAULT /* Privilege Violation */ +vector09: .long _FAULT /* Trace */ +vector0A: .long _FAULT /* Unimplemented A-Line */ +vector0B: .long _FAULT /* Unimplemented F-Line */ +vector0C: .long _FAULT /* Debug Interrupt */ +vector0D: .long _FAULT /* Reserved */ +vector0E: .long _FAULT /* Format Error */ +vector0F: .long _FAULT /* Unitialized Int. */ + +/* Reserved */ +vector10_17: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +vector18: .long _FAULT /* Spurious Interrupt */ +vector19: .long _FAULT /* Autovector Level 1 */ +vector1A: .long _FAULT /* Autovector Level 2 */ +vector1B: .long _FAULT /* Autovector Level 3 */ +vector1C: .long _FAULT /* Autovector Level 4 */ +vector1D: .long _FAULT /* Autovector Level 5 */ +vector1E: .long _FAULT /* Autovector Level 6 */ +vector1F: .long _FAULT /* Autovector Level 7 */ + +/* TRAP #0 - #15 */ +vector20_2F: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +/* Reserved */ +vector30_3F: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +vector64_127: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +vector128_191: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +vector192_255: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + + .text + + .globl _start +_start: + nop + nop + move.w #0x2700,%sr /* Mask off Interrupt */ + + /* Set vector base register at the beginning of the Flash */ + move.l #CFG_FLASH_BASE, %d0 + movec %d0, %VBR + + move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_RAM_CTRL), %d0 + movec %d0, %RAMBAR0 + + /* invalidate and disable cache */ + move.l #0x01000000, %d0 /* Invalidate cache cmd */ + movec %d0, %CACR /* Invalidate cache */ + move.l #0, %d0 + movec %d0, %ACR0 + movec %d0, %ACR1 + + /* initialize general use internal ram */ + move.l #0, %d0 + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1 + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a2 + move.l %d0, (%a1) + move.l %d0, (%a2) + + /* set stackpointer to end of internal ram to get some stackspace for the first c-code */ + move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET), %sp + clr.l %sp@- + + move.l #__got_start, %a5 /* put relocation table address to a5 */ + + bsr cpu_init_f /* run low-level CPU init code (from flash) */ + bsr board_init_f /* run low-level board init code (from flash) */ + + /* board_init_f() does not return */ + +/*------------------------------------------------------------------------------*/ + +/* + * void relocate_code (addr_sp, gd, addr_moni) + * + * This "function" does not return, instead it continues in RAM + * after relocating the monitor code. + * + * r3 = dest + * r4 = src + * r5 = length in bytes + * r6 = cachelinesize + */ + .globl relocate_code +relocate_code: + link.w %a6,#0 + move.l 8(%a6), %sp /* set new stack pointer */ + + move.l 12(%a6), %d0 /* Save copy of Global Data pointer */ + move.l 16(%a6), %a0 /* Save copy of Destination Address */ + + move.l #CFG_MONITOR_BASE, %a1 + move.l #__init_end, %a2 + move.l %a0, %a3 + + /* copy the code to RAM */ +1: + move.l (%a1)+, (%a3)+ + cmp.l %a1,%a2 + bgt.s 1b + +/* + * We are done. Do not return, instead branch to second part of board + * initialization, now running from RAM. + */ + move.l %a0, %a1 + add.l #(in_ram - CFG_MONITOR_BASE), %a1 + jmp (%a1) + +in_ram: + +clear_bss: + /* + * Now clear BSS segment + */ + move.l %a0, %a1 + add.l #(_sbss - CFG_MONITOR_BASE),%a1 + move.l %a0, %d1 + add.l #(_ebss - CFG_MONITOR_BASE),%d1 +6: + clr.l (%a1)+ + cmp.l %a1,%d1 + bgt.s 6b + + /* + * fix got table in RAM + */ + move.l %a0, %a1 + add.l #(__got_start - CFG_MONITOR_BASE),%a1 + move.l %a1,%a5 /* * fix got pointer register a5 */ + + move.l %a0, %a2 + add.l #(__got_end - CFG_MONITOR_BASE),%a2 + +7: + move.l (%a1),%d1 + sub.l #_start,%d1 + add.l %a0,%d1 + move.l %d1,(%a1)+ + cmp.l %a2, %a1 + bne 7b + + /* calculate relative jump to board_init_r in ram */ + move.l %a0, %a1 + add.l #(board_init_r - CFG_MONITOR_BASE), %a1 + + /* set parameters for board_init_r */ + move.l %a0,-(%sp) /* dest_addr */ + move.l %d0,-(%sp) /* gd */ + jsr (%a1) + +/*------------------------------------------------------------------------------*/ +/* exception code */ + .globl _fault +_fault: + jmp _fault + .globl _exc_handler + +_exc_handler: + SAVE_ALL + movel %sp,%sp@- + bsr exc_handler + addql #4,%sp + RESTORE_ALL + + .globl _int_handler +_int_handler: + SAVE_ALL + movel %sp,%sp@- + bsr int_handler + addql #4,%sp + RESTORE_ALL + +/*------------------------------------------------------------------------------*/ +/* cache functions */ + .globl icache_enable +icache_enable: + move.l #0x01000000, %d0 /* Invalidate cache cmd */ + movec %d0, %CACR /* Invalidate cache */ + move.l #(CFG_SDRAM_BASE + 0xc000), %d0 /* Setup cache mask */ + movec %d0, %ACR0 /* Enable cache */ + move.l #(CFG_CS0_BASE + 0xc000), %d0 /* Setup cache mask */ + movec %d0, %ACR1 /* Enable cache */ + + /*move.l #0x81000100, %d0*/ /* Setup cache mask */ + move.l #0x81000100, %d0 /* Setup cache mask */ + movec %d0, %CACR /* Enable cache */ + + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1 + moveq #1, %d0 + move.l %d0, (%a1) + rts + + .globl icache_disable +icache_disable: + move.l #0x00000100, %d0 /* Setup cache mask */ + movec %d0, %CACR /* Enable cache */ + clr.l %d0 /* Setup cache mask */ + movec %d0, %ACR0 /* Enable cache */ + movec %d0, %ACR1 /* Enable cache */ + + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1 + moveq #0, %d0 + move.l %d0, (%a1) + rts + + .globl icache_status +icache_status: + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1 + move.l (%a1), %d0 + rts + + .globl icache_invalid +icache_invalid: + move.l #0x00000100, %d0 /* Setup cache mask */ + movec %d0, %CACR /* Enable cache */ + rts + + .globl dcache_enable +dcache_enable: + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a1 + moveq #1, %d0 + move.l %d0, (%a1) + rts + + /* No dcache, just a dummy function */ + .globl dcache_disable +dcache_disable: + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a1 + moveq #0, %d0 + move.l %d0, (%a1) + rts + + .globl dcache_status +dcache_status: + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a1 + move.l (%a1), %d0 + rts + +/*------------------------------------------------------------------------------*/ + + .globl version_string +version_string: + .ascii U_BOOT_VERSION + .ascii " (", __DATE__, " - ", __TIME__, ")" + .ascii CONFIG_IDENT_STRING, "\0" diff --git a/drivers/net/Makefile b/drivers/net/Makefile new file mode 100644 index 00000000000..37d69b9949b --- /dev/null +++ b/drivers/net/Makefile @@ -0,0 +1,45 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB := $(obj)libnet.a + +COBJS := mcffec.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +all: $(LIB) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/drivers/net/mcffec.c b/drivers/net/mcffec.c new file mode 100644 index 00000000000..d1c84caee0d --- /dev/null +++ b/drivers/net/mcffec.c @@ -0,0 +1,594 @@ +/* + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2007 + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#include +#include +#include + +#include +#include +#include +#include + +#ifdef CONFIG_MCFFEC +#undef ET_DEBUG +#undef MII_DEBUG + +/* Ethernet Transmit and Receive Buffers */ +#define DBUF_LENGTH 1520 + +#define TX_BUF_CNT 2 + +/* + NOTE: PKT_MAXBUF_SIZE must be larger or equal to PKT_MAXBLR_SIZE, + see M54455 User Manual for MAX_FL of Receive Control Register for more + description. If PKT_MAXBUF_SIZE set to 1518, the FEC bandwidth will + reduce to about 20~40% of normal bandwidth. Changing PKT_MAXBLR_SIZE + will not make any improvement on speed +*/ +#define PKT_MAXBUF_SIZE 1518 +#define PKT_MINBUF_SIZE 64 +#define PKT_MAXBLR_SIZE 1520 +#define LAST_PKTBUFSRX PKTBUFSRX - 1 +#define BD_ENET_RX_W_E (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY) +#define BD_ENET_TX_RDY_LST (BD_ENET_TX_READY | BD_ENET_TX_LAST) + +DECLARE_GLOBAL_DATA_PTR; + +#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) + +struct fec_info_s fec_info[] = { +#ifdef CFG_FEC0_IOBASE + { + 0, /* index */ + CFG_FEC0_IOBASE, /* io base */ + CFG_FEC0_PINMUX, /* gpio pin muxing */ + CFG_FEC0_MIIBASE, /* mii base */ + -1, /* phy_addr */ + 0, /* duplex and speed */ + 0, /* phy name */ + 0, /* phyname init */ + 0, /* RX BD */ + 0, /* TX BD */ + 0, /* rx Index */ + 0, /* tx Index */ + 0, /* tx buffer */ + 0, /* initialized flag */ + }, +#endif +#ifdef CFG_FEC1_IOBASE + { + 1, /* index */ + CFG_FEC1_IOBASE, /* io base */ + CFG_FEC1_PINMUX, /* gpio pin muxing */ + CFG_FEC1_MIIBASE, /* mii base */ + -1, /* phy_addr */ + 0, /* duplex and speed */ + 0, /* phy name */ + 0, /* phy name init */ + 0, /* RX BD */ + 0, /* TX BD */ + 0, /* rx Index */ + 0, /* tx Index */ + 0, /* tx buffer */ + 0, /* initialized flag */ + } +#endif +}; + +/* + * FEC Ethernet Tx and Rx buffer descriptors allocated at the + * immr->udata_bd address on Dual-Port RAM + * Provide for Double Buffering + */ + +int fec_send(struct eth_device *dev, volatile void *packet, int length); +int fec_recv(struct eth_device *dev); +int fec_init(struct eth_device *dev, bd_t * bd); +void fec_halt(struct eth_device *dev); +void fec_reset(struct eth_device *dev); + +extern int fecpin_setclear(struct eth_device *dev, int setclear); + +#ifdef CFG_DISCOVER_PHY +extern void mii_init(void); +extern uint mii_send(uint mii_cmd); +extern int mii_discover_phy(struct eth_device *dev); +extern int mcffec_miiphy_read(char *devname, unsigned char addr, + unsigned char reg, unsigned short *value); +extern int mcffec_miiphy_write(char *devname, unsigned char addr, + unsigned char reg, unsigned short value); +#endif + +void setFecDuplexSpeed(volatile fec_t * fecp, bd_t * bd, int dup_spd) +{ + if ((dup_spd >> 16) == FULL) { + /* Set maximum frame length */ + fecp->rcr = FEC_RCR_MAX_FL(PKT_MAXBUF_SIZE) | FEC_RCR_MII_MODE | + FEC_RCR_PROM | 0x100; + fecp->tcr = FEC_TCR_FDEN; + } else { + /* Half duplex mode */ + fecp->rcr = FEC_RCR_MAX_FL(PKT_MAXBUF_SIZE) | + FEC_RCR_MII_MODE | FEC_RCR_DRT; + fecp->tcr &= ~FEC_TCR_FDEN; + } + + if ((dup_spd & 0xFFFF) == _100BASET) { +#ifdef MII_DEBUG + printf("100Mbps\n"); +#endif + bd->bi_ethspeed = 100; + } else { +#ifdef MII_DEBUG + printf("10Mbps\n"); +#endif + bd->bi_ethspeed = 10; + } +} + +int fec_send(struct eth_device *dev, volatile void *packet, int length) +{ + struct fec_info_s *info = dev->priv; + volatile fec_t *fecp = (fec_t *) (info->iobase); + int j, rc; + u16 phyStatus; + + miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &phyStatus); + + /* section 16.9.23.3 + * Wait for ready + */ + j = 0; + while ((info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_READY) && + (j < MCFFEC_TOUT_LOOP)) { + udelay(1); + j++; + } + if (j >= MCFFEC_TOUT_LOOP) { + printf("TX not ready\n"); + } + + info->txbd[info->txIdx].cbd_bufaddr = (uint) packet; + info->txbd[info->txIdx].cbd_datlen = length; + info->txbd[info->txIdx].cbd_sc |= BD_ENET_TX_RDY_LST; + + /* Activate transmit Buffer Descriptor polling */ + fecp->tdar = 0x01000000; /* Descriptor polling active */ + + j = 0; + while ((info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_READY) && + (j < MCFFEC_TOUT_LOOP)) { + udelay(1); + j++; + } + if (j >= MCFFEC_TOUT_LOOP) { + printf("TX timeout\n"); + } +#ifdef ET_DEBUG + printf("%s[%d] %s: cycles: %d status: %x retry cnt: %d\n", + __FILE__, __LINE__, __FUNCTION__, j, + info->txbd[info->txIdx].cbd_sc, + (info->txbd[info->txIdx].cbd_sc & 0x003C) >> 2); +#endif + + /* return only status bits */ ; + rc = (info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_STATS); + info->txIdx = (info->txIdx + 1) % TX_BUF_CNT; + + return rc; +} + +int fec_recv(struct eth_device *dev) +{ + struct fec_info_s *info = dev->priv; + volatile fec_t *fecp = (fec_t *) (info->iobase); + int length; + + for (;;) { + /* section 16.9.23.2 */ + if (info->rxbd[info->rxIdx].cbd_sc & BD_ENET_RX_EMPTY) { + length = -1; + break; /* nothing received - leave for() loop */ + } + + length = info->rxbd[info->rxIdx].cbd_datlen; + + if (info->rxbd[info->rxIdx].cbd_sc & 0x003f) { + printf("%s[%d] err: %x\n", + __FUNCTION__, __LINE__, + info->rxbd[info->rxIdx].cbd_sc); +#ifdef ET_DEBUG + printf("%s[%d] err: %x\n", + __FUNCTION__, __LINE__, + info->rxbd[info->rxIdx].cbd_sc); +#endif + } else { + + length -= 4; + /* Pass the packet up to the protocol layers. */ + NetReceive(NetRxPackets[info->rxIdx], length); + + fecp->eir |= FEC_EIR_RXF; + } + + /* Give the buffer back to the FEC. */ + info->rxbd[info->rxIdx].cbd_datlen = 0; + + /* wrap around buffer index when necessary */ + if (info->rxIdx == LAST_PKTBUFSRX) { + info->rxbd[PKTBUFSRX - 1].cbd_sc = BD_ENET_RX_W_E; + info->rxIdx = 0; + } else { + info->rxbd[info->rxIdx].cbd_sc = BD_ENET_RX_EMPTY; + info->rxIdx++; + } + + /* Try to fill Buffer Descriptors */ + fecp->rdar = 0x01000000; /* Descriptor polling active */ + } + + return length; +} + +/************************************************************** + * + * FEC Ethernet Initialization Routine + * + *************************************************************/ + +#ifdef ET_DEBUG +void dbgFecRegs(struct eth_device *dev) +{ + struct fec_info_s *info = dev->priv; + volatile fec_t *fecp = (fec_t *) (info->iobase); + + printf("=====\n"); + printf("ievent %x - %x\n", (int)&fecp->eir, fecp->eir); + printf("imask %x - %x\n", (int)&fecp->eimr, fecp->eimr); + printf("r_des_active %x - %x\n", (int)&fecp->rdar, fecp->rdar); + printf("x_des_active %x - %x\n", (int)&fecp->tdar, fecp->tdar); + printf("ecntrl %x - %x\n", (int)&fecp->ecr, fecp->ecr); + printf("mii_mframe %x - %x\n", (int)&fecp->mmfr, fecp->mmfr); + printf("mii_speed %x - %x\n", (int)&fecp->mscr, fecp->mscr); + printf("mii_ctrlstat %x - %x\n", (int)&fecp->mibc, fecp->mibc); + printf("r_cntrl %x - %x\n", (int)&fecp->rcr, fecp->rcr); + printf("x_cntrl %x - %x\n", (int)&fecp->tcr, fecp->tcr); + printf("padr_l %x - %x\n", (int)&fecp->palr, fecp->palr); + printf("padr_u %x - %x\n", (int)&fecp->paur, fecp->paur); + printf("op_pause %x - %x\n", (int)&fecp->opd, fecp->opd); + printf("iadr_u %x - %x\n", (int)&fecp->iaur, fecp->iaur); + printf("iadr_l %x - %x\n", (int)&fecp->ialr, fecp->ialr); + printf("gadr_u %x - %x\n", (int)&fecp->gaur, fecp->gaur); + printf("gadr_l %x - %x\n", (int)&fecp->galr, fecp->galr); + printf("x_wmrk %x - %x\n", (int)&fecp->tfwr, fecp->tfwr); + printf("r_bound %x - %x\n", (int)&fecp->frbr, fecp->frbr); + printf("r_fstart %x - %x\n", (int)&fecp->frsr, fecp->frsr); + printf("r_drng %x - %x\n", (int)&fecp->erdsr, fecp->erdsr); + printf("x_drng %x - %x\n", (int)&fecp->etdsr, fecp->etdsr); + printf("r_bufsz %x - %x\n", (int)&fecp->emrbr, fecp->emrbr); + + printf("\n"); + printf("rmon_t_drop %x - %x\n", (int)&fecp->rmon_t_drop, + fecp->rmon_t_drop); + printf("rmon_t_packets %x - %x\n", (int)&fecp->rmon_t_packets, + fecp->rmon_t_packets); + printf("rmon_t_bc_pkt %x - %x\n", (int)&fecp->rmon_t_bc_pkt, + fecp->rmon_t_bc_pkt); + printf("rmon_t_mc_pkt %x - %x\n", (int)&fecp->rmon_t_mc_pkt, + fecp->rmon_t_mc_pkt); + printf("rmon_t_crc_align %x - %x\n", (int)&fecp->rmon_t_crc_align, + fecp->rmon_t_crc_align); + printf("rmon_t_undersize %x - %x\n", (int)&fecp->rmon_t_undersize, + fecp->rmon_t_undersize); + printf("rmon_t_oversize %x - %x\n", (int)&fecp->rmon_t_oversize, + fecp->rmon_t_oversize); + printf("rmon_t_frag %x - %x\n", (int)&fecp->rmon_t_frag, + fecp->rmon_t_frag); + printf("rmon_t_jab %x - %x\n", (int)&fecp->rmon_t_jab, + fecp->rmon_t_jab); + printf("rmon_t_col %x - %x\n", (int)&fecp->rmon_t_col, + fecp->rmon_t_col); + printf("rmon_t_p64 %x - %x\n", (int)&fecp->rmon_t_p64, + fecp->rmon_t_p64); + printf("rmon_t_p65to127 %x - %x\n", (int)&fecp->rmon_t_p65to127, + fecp->rmon_t_p65to127); + printf("rmon_t_p128to255 %x - %x\n", (int)&fecp->rmon_t_p128to255, + fecp->rmon_t_p128to255); + printf("rmon_t_p256to511 %x - %x\n", (int)&fecp->rmon_t_p256to511, + fecp->rmon_t_p256to511); + printf("rmon_t_p512to1023 %x - %x\n", (int)&fecp->rmon_t_p512to1023, + fecp->rmon_t_p512to1023); + printf("rmon_t_p1024to2047 %x - %x\n", (int)&fecp->rmon_t_p1024to2047, + fecp->rmon_t_p1024to2047); + printf("rmon_t_p_gte2048 %x - %x\n", (int)&fecp->rmon_t_p_gte2048, + fecp->rmon_t_p_gte2048); + printf("rmon_t_octets %x - %x\n", (int)&fecp->rmon_t_octets, + fecp->rmon_t_octets); + + printf("\n"); + printf("ieee_t_drop %x - %x\n", (int)&fecp->ieee_t_drop, + fecp->ieee_t_drop); + printf("ieee_t_frame_ok %x - %x\n", (int)&fecp->ieee_t_frame_ok, + fecp->ieee_t_frame_ok); + printf("ieee_t_1col %x - %x\n", (int)&fecp->ieee_t_1col, + fecp->ieee_t_1col); + printf("ieee_t_mcol %x - %x\n", (int)&fecp->ieee_t_mcol, + fecp->ieee_t_mcol); + printf("ieee_t_def %x - %x\n", (int)&fecp->ieee_t_def, + fecp->ieee_t_def); + printf("ieee_t_lcol %x - %x\n", (int)&fecp->ieee_t_lcol, + fecp->ieee_t_lcol); + printf("ieee_t_excol %x - %x\n", (int)&fecp->ieee_t_excol, + fecp->ieee_t_excol); + printf("ieee_t_macerr %x - %x\n", (int)&fecp->ieee_t_macerr, + fecp->ieee_t_macerr); + printf("ieee_t_cserr %x - %x\n", (int)&fecp->ieee_t_cserr, + fecp->ieee_t_cserr); + printf("ieee_t_sqe %x - %x\n", (int)&fecp->ieee_t_sqe, + fecp->ieee_t_sqe); + printf("ieee_t_fdxfc %x - %x\n", (int)&fecp->ieee_t_fdxfc, + fecp->ieee_t_fdxfc); + printf("ieee_t_octets_ok %x - %x\n", (int)&fecp->ieee_t_octets_ok, + fecp->ieee_t_octets_ok); + + printf("\n"); + printf("rmon_r_drop %x - %x\n", (int)&fecp->rmon_r_drop, + fecp->rmon_r_drop); + printf("rmon_r_packets %x - %x\n", (int)&fecp->rmon_r_packets, + fecp->rmon_r_packets); + printf("rmon_r_bc_pkt %x - %x\n", (int)&fecp->rmon_r_bc_pkt, + fecp->rmon_r_bc_pkt); + printf("rmon_r_mc_pkt %x - %x\n", (int)&fecp->rmon_r_mc_pkt, + fecp->rmon_r_mc_pkt); + printf("rmon_r_crc_align %x - %x\n", (int)&fecp->rmon_r_crc_align, + fecp->rmon_r_crc_align); + printf("rmon_r_undersize %x - %x\n", (int)&fecp->rmon_r_undersize, + fecp->rmon_r_undersize); + printf("rmon_r_oversize %x - %x\n", (int)&fecp->rmon_r_oversize, + fecp->rmon_r_oversize); + printf("rmon_r_frag %x - %x\n", (int)&fecp->rmon_r_frag, + fecp->rmon_r_frag); + printf("rmon_r_jab %x - %x\n", (int)&fecp->rmon_r_jab, + fecp->rmon_r_jab); + printf("rmon_r_p64 %x - %x\n", (int)&fecp->rmon_r_p64, + fecp->rmon_r_p64); + printf("rmon_r_p65to127 %x - %x\n", (int)&fecp->rmon_r_p65to127, + fecp->rmon_r_p65to127); + printf("rmon_r_p128to255 %x - %x\n", (int)&fecp->rmon_r_p128to255, + fecp->rmon_r_p128to255); + printf("rmon_r_p256to511 %x - %x\n", (int)&fecp->rmon_r_p256to511, + fecp->rmon_r_p256to511); + printf("rmon_r_p512to1023 %x - %x\n", (int)&fecp->rmon_r_p512to1023, + fecp->rmon_r_p512to1023); + printf("rmon_r_p1024to2047 %x - %x\n", (int)&fecp->rmon_r_p1024to2047, + fecp->rmon_r_p1024to2047); + printf("rmon_r_p_gte2048 %x - %x\n", (int)&fecp->rmon_r_p_gte2048, + fecp->rmon_r_p_gte2048); + printf("rmon_r_octets %x - %x\n", (int)&fecp->rmon_r_octets, + fecp->rmon_r_octets); + + printf("\n"); + printf("ieee_r_drop %x - %x\n", (int)&fecp->ieee_r_drop, + fecp->ieee_r_drop); + printf("ieee_r_frame_ok %x - %x\n", (int)&fecp->ieee_r_frame_ok, + fecp->ieee_r_frame_ok); + printf("ieee_r_crc %x - %x\n", (int)&fecp->ieee_r_crc, + fecp->ieee_r_crc); + printf("ieee_r_align %x - %x\n", (int)&fecp->ieee_r_align, + fecp->ieee_r_align); + printf("ieee_r_macerr %x - %x\n", (int)&fecp->ieee_r_macerr, + fecp->ieee_r_macerr); + printf("ieee_r_fdxfc %x - %x\n", (int)&fecp->ieee_r_fdxfc, + fecp->ieee_r_fdxfc); + printf("ieee_r_octets_ok %x - %x\n", (int)&fecp->ieee_r_octets_ok, + fecp->ieee_r_octets_ok); + + printf("\n\n\n"); +} +#endif + +int fec_init(struct eth_device *dev, bd_t * bd) +{ + struct fec_info_s *info = dev->priv; + volatile fec_t *fecp = (fec_t *) (info->iobase); + int i; + u8 *ea; + + fecpin_setclear(dev, 1); + + fec_reset(dev); + +#if (CONFIG_COMMANDS & CFG_CMD_MII) || defined (CONFIG_MII) || \ + defined (CFG_DISCOVER_PHY) + + mii_init(); + + setFecDuplexSpeed(fecp, bd, info->dup_spd); +#else +#ifndef CFG_DISCOVER_PHY + setFecDuplexSpeed(fecp, bd, (FECDUPLEX << 16) | FECSPEED); +#endif /* ifndef CFG_DISCOVER_PHY */ +#endif /* CFG_CMD_MII || CONFIG_MII */ + + /* We use strictly polling mode only */ + fecp->eimr = 0; + + /* Clear any pending interrupt */ + fecp->eir = 0xffffffff; + + /* Set station address */ + if ((u32) fecp == CFG_FEC0_IOBASE) { + ea = &bd->bi_enetaddr[0]; + } else { +#ifdef CFG_FEC1_IOBASE + ea = &bd->bi_enet1addr[0]; +#endif + } + + fecp->palr = (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]); + fecp->paur = (ea[4] << 24) | (ea[5] << 16); +#ifdef ET_DEBUG + printf("Eth Addrs: %02x:%02x:%02x:%02x:%02x:%02x\n", + ea[0], ea[1], ea[2], ea[3], ea[4], ea[5]); +#endif + + /* Clear unicast address hash table */ + fecp->iaur = 0; + fecp->ialr = 0; + + /* Clear multicast address hash table */ + fecp->gaur = 0; + fecp->galr = 0; + + /* Set maximum receive buffer size. */ + fecp->emrbr = PKT_MAXBLR_SIZE; + + /* + * Setup Buffers and Buffer Desriptors + */ + info->rxIdx = 0; + info->txIdx = 0; + + /* + * Setup Receiver Buffer Descriptors (13.14.24.18) + * Settings: + * Empty, Wrap + */ + for (i = 0; i < PKTBUFSRX; i++) { + info->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY; + info->rxbd[i].cbd_datlen = 0; /* Reset */ + info->rxbd[i].cbd_bufaddr = (uint) NetRxPackets[i]; + } + info->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP; + + /* + * Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19) + * Settings: + * Last, Tx CRC + */ + for (i = 0; i < TX_BUF_CNT; i++) { + info->txbd[i].cbd_sc = BD_ENET_TX_LAST | BD_ENET_TX_TC; + info->txbd[i].cbd_datlen = 0; /* Reset */ + info->txbd[i].cbd_bufaddr = (uint) (&info->txbuf[0]); + } + info->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP; + + /* Set receive and transmit descriptor base */ + fecp->erdsr = (unsigned int)(&info->rxbd[0]); + fecp->etdsr = (unsigned int)(&info->txbd[0]); + + /* Now enable the transmit and receive processing */ + fecp->ecr |= FEC_ECR_ETHER_EN; + + /* And last, try to fill Rx Buffer Descriptors */ + fecp->rdar = 0x01000000; /* Descriptor polling active */ + + return 1; +} + +void fec_reset(struct eth_device *dev) +{ + struct fec_info_s *info = dev->priv; + volatile fec_t *fecp = (fec_t *) (info->iobase); + int i; + + fecp->ecr = FEC_ECR_RESET; + for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { + udelay(1); + } + if (i == FEC_RESET_DELAY) { + printf("FEC_RESET_DELAY timeout\n"); + } +} + +void fec_halt(struct eth_device *dev) +{ + struct fec_info_s *info = dev->priv; + + fec_reset(dev); + + fecpin_setclear(dev, 0); + + info->rxIdx = info->txIdx = 0; + memset(info->rxbd, 0, PKTBUFSRX * sizeof(cbd_t)); + memset(info->txbd, 0, TX_BUF_CNT * sizeof(cbd_t)); + memset(info->txbuf, 0, DBUF_LENGTH); +} + +int mcffec_initialize(bd_t * bis) +{ + struct eth_device *dev; + int i; + + for (i = 0; i < sizeof(fec_info) / sizeof(fec_info[0]); i++) { + + dev = (struct eth_device *)malloc(sizeof *dev); + if (dev == NULL) + hang(); + + memset(dev, 0, sizeof(*dev)); + + sprintf(dev->name, "FEC%d", fec_info[i].index); + + dev->priv = &fec_info[i]; + dev->init = fec_init; + dev->halt = fec_halt; + dev->send = fec_send; + dev->recv = fec_recv; + + /* setup Receive and Transmit buffer descriptor */ + fec_info[i].rxbd = + (cbd_t *) memalign(32, (PKTBUFSRX * sizeof(cbd_t) + 31)); + fec_info[i].txbd = + (cbd_t *) memalign(32, (TX_BUF_CNT * sizeof(cbd_t) + 31)); + fec_info[i].txbuf = (char *)memalign(32, DBUF_LENGTH + 31); +#ifdef ET_DEBUG + printf("rxbd %x txbd %x\n", + (int)fec_info[i].rxbd, (int)fec_info[i].txbd); +#endif + + fec_info[i].phy_name = (char *)malloc(32); + + eth_register(dev); + +#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII) + miiphy_register(dev->name, + mcffec_miiphy_read, mcffec_miiphy_write); +#endif + } + + /* default speed */ + bis->bi_ethspeed = 10; + + return 1; +} + +#endif /* CFG_CMD_NET, FEC_ENET & NET_MULTI */ +#endif /* CONFIG_MCFFEC */ diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile new file mode 100644 index 00000000000..2208a08a71c --- /dev/null +++ b/drivers/serial/Makefile @@ -0,0 +1,45 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB := $(obj)libserial.a + +COBJS := mcfserial.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +all: $(LIB) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/drivers/serial/mcfserial.c b/drivers/serial/mcfserial.c new file mode 100644 index 00000000000..a8ca78ad8ca --- /dev/null +++ b/drivers/serial/mcfserial.c @@ -0,0 +1,126 @@ +/* + * (C) Copyright 2004, Freescale, Inc + * TsiChung Liew, Tsi-Chung.Liew@freescale.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +/* + * Minimal serial functions needed to use one of the uart ports + * as serial console interface. + */ + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_MCFSERIAL +int serial_init(void) +{ + volatile uart_t *uart; + u32 counter; + + uart = (volatile uart_t *)(CFG_UART_BASE); + + /* write to SICR: SIM2 = uart mode,dcd does not affect rx */ + uart->ucr = UART_UCR_RESET_RX; + uart->ucr = UART_UCR_RESET_TX; + uart->ucr = UART_UCR_RESET_ERROR; + uart->ucr = UART_UCR_RESET_MR; + __asm__("nop"); + + uart->uimr = 0; + + /* write to CSR: RX/TX baud rate from timers */ + uart->ucsr = (UART_UCSR_RCS_SYS_CLK | UART_UCSR_TCS_SYS_CLK); + + uart->umr = (UART_UMR_BC_8 | UART_UMR_PM_NONE); + uart->umr = UART_UMR_SB_STOP_BITS_1; + + /* Setting up BaudRate */ + counter = (u32) (gd->bus_clk / (gd->baudrate)); + counter >>= 5; + + /* write to CTUR: divide counter upper byte */ + uart->ubg1 = (u8) ((counter & 0xff00) >> 8); + /* write to CTLR: divide counter lower byte */ + uart->ubg2 = (u8) (counter & 0x00ff); + + uart->ucr = (UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED); + + return (0); +} + +void serial_putc(const char c) +{ + volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE); + + if (c == '\n') + serial_putc('\r'); + + /* Wait for last character to go. */ + while (!(uart->usr & UART_USR_TXRDY)) ; + + uart->utb = c; +} + +void serial_puts(const char *s) +{ + while (*s) { + serial_putc(*s++); + } +} + +int serial_getc(void) +{ + volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE); + + /* Wait for a character to arrive. */ + while (!(uart->usr & UART_USR_RXRDY)) ; + return uart->urb; +} + +int serial_tstc(void) +{ + volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE); + + return (uart->usr & UART_USR_RXRDY); +} + +void serial_setbrg(void) +{ + volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE); + u32 counter; + + counter = ((gd->bus_clk / gd->baudrate)) >> 5; + counter++; + + /* write to CTUR: divide counter upper byte */ + uart->ubg1 = ((counter & 0xff00) >> 8); + /* write to CTLR: divide counter lower byte */ + uart->ubg2 = (counter & 0x00ff); + + uart->ucr = UART_UCR_RESET_RX; + uart->ucr = UART_UCR_RESET_TX; + + uart->ucr = UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED; +} +#endif /* CONFIG_MCFSERIAL */ diff --git a/include/asm-m68k/byteorder.h b/include/asm-m68k/byteorder.h index ce613ac384a..0e2a0ed8cbd 100644 --- a/include/asm-m68k/byteorder.h +++ b/include/asm-m68k/byteorder.h @@ -1,7 +1,107 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + #ifndef _M68K_BYTEORDER_H #define _M68K_BYTEORDER_H #include + +#ifdef __GNUC__ +#define __sw16(x) \ + ((__u16)( \ + (((__u16)(x) & (__u16)0x00ffU) << 8) | \ + (((__u16)(x) & (__u16)0xff00U) >> 8) )) +#define __sw32(x) \ + ((__u32)( \ + (((__u32)(x)) << 24) | \ + (((__u32)(x) & (__u32)0x0000ff00UL) << 8) | \ + (((__u32)(x) & (__u32)0x00ff0000UL) >> 8) | \ + (((__u32)(x)) >> 24) )) + +extern __inline__ unsigned ld_le16(const volatile unsigned short *addr) +{ + unsigned result = *addr; + return __sw16(result); +} + +extern __inline__ void st_le16(volatile unsigned short *addr, + const unsigned val) +{ + *addr = __sw16(val); +} + +extern __inline__ unsigned ld_le32(const volatile unsigned *addr) +{ + unsigned result = *addr; + return __sw32(result); +} + +extern __inline__ void st_le32(volatile unsigned *addr, const unsigned val) +{ + *addr = __sw32(val); +} + +#if 0 +/* alas, egcs sounds like it has a bug in this code that doesn't use the + inline asm correctly, and can cause file corruption. Until I hear that + it's fixed, I can live without the extra speed. I hope. */ +#if !(__GNUC__ >= 2 && __GNUC_MINOR__ >= 90) +#if 0 +# define __arch_swab16(x) ld_le16(&x) +# define __arch_swab32(x) ld_le32(&x) +#else +static __inline__ __attribute__ ((const)) +__u16 ___arch__swab16(__u16 value) +{ + return __sw16(value); +} + +static __inline__ __attribute__ ((const)) +__u32 ___arch__swab32(__u32 value) +{ + return __sw32(value); +} + +#define __arch__swab32(x) ___arch__swab32(x) +#define __arch__swab16(x) ___arch__swab16(x) +#endif /* 0 */ + +#endif + +/* The same, but returns converted value from the location pointer by addr. */ +#define __arch__swab16p(addr) ld_le16(addr) +#define __arch__swab32p(addr) ld_le32(addr) + +/* The same, but do the conversion in situ, ie. put the value back to addr. */ +#define __arch__swab16s(addr) st_le16(addr,*addr) +#define __arch__swab32s(addr) st_le32(addr,*addr) +#endif + +#endif /* __GNUC__ */ + +#if defined(__GNUC__) && !defined(__STRICT_ANSI__) +#define __BYTEORDER_HAS_U64__ +#endif #include -#endif /* _M68K_BYTEORDER_H */ +#endif /* _M68K_BYTEORDER_H */ diff --git a/include/asm-m68k/fec.h b/include/asm-m68k/fec.h index 5bbbfb245d8..9a5e7d5ab9b 100644 --- a/include/asm-m68k/fec.h +++ b/include/asm-m68k/fec.h @@ -5,6 +5,10 @@ * MPC8xx Communication Processor Module. * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) * + * Add FEC Structure and definitions + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * * See file CREDITS for list of people who contributed to this * project. * @@ -30,9 +34,9 @@ /* Buffer descriptors used FEC. */ typedef struct cpm_buf_desc { - ushort cbd_sc; /* Status and Control */ - ushort cbd_datlen; /* Data length in buffer */ - uint cbd_bufaddr; /* Buffer address in host memory */ + ushort cbd_sc; /* Status and Control */ + ushort cbd_datlen; /* Data length in buffer */ + uint cbd_bufaddr; /* Buffer address in host memory */ } cbd_t; #define BD_SC_EMPTY ((ushort)0x8000) /* Recieve is empty */ @@ -53,28 +57,36 @@ typedef struct cpm_buf_desc { /* Buffer descriptor control/status used by Ethernet receive. */ #define BD_ENET_RX_EMPTY ((ushort)0x8000) +#define BD_ENET_RX_RO1 ((ushort)0x4000) #define BD_ENET_RX_WRAP ((ushort)0x2000) #define BD_ENET_RX_INTR ((ushort)0x1000) +#define BD_ENET_RX_RO2 BD_ENET_RX_INTR #define BD_ENET_RX_LAST ((ushort)0x0800) #define BD_ENET_RX_FIRST ((ushort)0x0400) #define BD_ENET_RX_MISS ((ushort)0x0100) +#define BD_ENET_RX_BC ((ushort)0x0080) +#define BD_ENET_RX_MC ((ushort)0x0040) #define BD_ENET_RX_LG ((ushort)0x0020) #define BD_ENET_RX_NO ((ushort)0x0010) #define BD_ENET_RX_SH ((ushort)0x0008) #define BD_ENET_RX_CR ((ushort)0x0004) #define BD_ENET_RX_OV ((ushort)0x0002) #define BD_ENET_RX_CL ((ushort)0x0001) +#define BD_ENET_RX_TR BD_ENET_RX_CL #define BD_ENET_RX_STATS ((ushort)0x013f) /* All status bits */ /* Buffer descriptor control/status used by Ethernet transmit. */ #define BD_ENET_TX_READY ((ushort)0x8000) #define BD_ENET_TX_PAD ((ushort)0x4000) +#define BD_ENET_TX_TO1 BD_ENET_TX_PAD #define BD_ENET_TX_WRAP ((ushort)0x2000) #define BD_ENET_TX_INTR ((ushort)0x1000) +#define BD_ENET_TX_TO2 BD_ENET_TX_INTR_ #define BD_ENET_TX_LAST ((ushort)0x0800) #define BD_ENET_TX_TC ((ushort)0x0400) #define BD_ENET_TX_DEF ((ushort)0x0200) +#define BD_ENET_TX_ABC BD_ENET_TX_DEF #define BD_ENET_TX_HB ((ushort)0x0100) #define BD_ENET_TX_LC ((ushort)0x0080) #define BD_ENET_TX_RL ((ushort)0x0040) @@ -83,4 +95,225 @@ typedef struct cpm_buf_desc { #define BD_ENET_TX_CSL ((ushort)0x0001) #define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */ -#endif /* fec_h */ +#ifdef CONFIG_MCFFEC +/********************************************************************* +* +* Fast Ethernet Controller (FEC) +* +*********************************************************************/ +/* FEC private information */ +struct fec_info_s { + int index; + u32 iobase; + u32 pinmux; + u32 miibase; + int phy_addr; + int dup_spd; + char *phy_name; + int phyname_init; + cbd_t *rxbd; /* Rx BD */ + cbd_t *txbd; /* Tx BD */ + uint rxIdx; + uint txIdx; + char *txbuf; + int initialized; +}; + +/* Register read/write struct */ +typedef struct fec { + u8 resv0[0x4]; + u32 eir; + u32 eimr; + u8 resv1[0x4]; + u32 rdar; + u32 tdar; + u8 resv2[0xC]; + u32 ecr; + u8 resv3[0x18]; + u32 mmfr; + u32 mscr; + u8 resv4[0x1C]; + u32 mibc; + u8 resv5[0x1C]; + u32 rcr; + u8 resv6[0x3C]; + u32 tcr; + u8 resv7[0x1C]; + u32 palr; + u32 paur; + u32 opd; + u8 resv8[0x28]; + u32 iaur; + u32 ialr; + u32 gaur; + u32 galr; + u8 resv9[0x1C]; + u32 tfwr; + u8 resv10[0x4]; + u32 frbr; + u32 frsr; + u8 resv11[0x2C]; + u32 erdsr; + u32 etdsr; + u32 emrbr; + u8 resv12[0x74]; + + u32 rmon_t_drop; + u32 rmon_t_packets; + u32 rmon_t_bc_pkt; + u32 rmon_t_mc_pkt; + u32 rmon_t_crc_align; + u32 rmon_t_undersize; + u32 rmon_t_oversize; + u32 rmon_t_frag; + u32 rmon_t_jab; + u32 rmon_t_col; + u32 rmon_t_p64; + u32 rmon_t_p65to127; + u32 rmon_t_p128to255; + u32 rmon_t_p256to511; + u32 rmon_t_p512to1023; + u32 rmon_t_p1024to2047; + u32 rmon_t_p_gte2048; + u32 rmon_t_octets; + + u32 ieee_t_drop; + u32 ieee_t_frame_ok; + u32 ieee_t_1col; + u32 ieee_t_mcol; + u32 ieee_t_def; + u32 ieee_t_lcol; + u32 ieee_t_excol; + u32 ieee_t_macerr; + u32 ieee_t_cserr; + u32 ieee_t_sqe; + u32 ieee_t_fdxfc; + u32 ieee_t_octets_ok; + u8 resv13[0x8]; + + u32 rmon_r_drop; + u32 rmon_r_packets; + u32 rmon_r_bc_pkt; + u32 rmon_r_mc_pkt; + u32 rmon_r_crc_align; + u32 rmon_r_undersize; + u32 rmon_r_oversize; + u32 rmon_r_frag; + u32 rmon_r_jab; + u32 rmon_r_resvd_0; + u32 rmon_r_p64; + u32 rmon_r_p65to127; + u32 rmon_r_p128to255; + u32 rmon_r_p256to511; + u32 rmon_r_p512to1023; + u32 rmon_r_p1024to2047; + u32 rmon_r_p_gte2048; + u32 rmon_r_octets; + + u32 ieee_r_drop; + u32 ieee_r_frame_ok; + u32 ieee_r_crc; + u32 ieee_r_align; + u32 ieee_r_macerr; + u32 ieee_r_fdxfc; + u32 ieee_r_octets_ok; +} fec_t; + +/********************************************************************* +* Fast Ethernet Controller (FEC) +*********************************************************************/ +/* Bit definitions and macros for FEC_EIR */ +#define FEC_EIR_CLEAR_ALL (0xFFF80000) +#define FEC_EIR_HBERR (0x80000000) +#define FEC_EIR_BABR (0x40000000) +#define FEC_EIR_BABT (0x20000000) +#define FEC_EIR_GRA (0x10000000) +#define FEC_EIR_TXF (0x08000000) +#define FEC_EIR_TXB (0x04000000) +#define FEC_EIR_RXF (0x02000000) +#define FEC_EIR_RXB (0x01000000) +#define FEC_EIR_MII (0x00800000) +#define FEC_EIR_EBERR (0x00400000) +#define FEC_EIR_LC (0x00200000) +#define FEC_EIR_RL (0x00100000) +#define FEC_EIR_UN (0x00080000) + +/* Bit definitions and macros for FEC_RDAR */ +#define FEC_RDAR_R_DES_ACTIVE (0x01000000) + +/* Bit definitions and macros for FEC_TDAR */ +#define FEC_TDAR_X_DES_ACTIVE (0x01000000) + +/* Bit definitions and macros for FEC_ECR */ +#define FEC_ECR_ETHER_EN (0x00000002) +#define FEC_ECR_RESET (0x00000001) + +/* Bit definitions and macros for FEC_MMFR */ +#define FEC_MMFR_DATA(x) (((x)&0xFFFF)) +#define FEC_MMFR_ST(x) (((x)&0x03)<<30) +#define FEC_MMFR_ST_01 (0x40000000) +#define FEC_MMFR_OP_RD (0x20000000) +#define FEC_MMFR_OP_WR (0x10000000) +#define FEC_MMFR_PA(x) (((x)&0x1F)<<23) +#define FEC_MMFR_RA(x) (((x)&0x1F)<<18) +#define FEC_MMFR_TA(x) (((x)&0x03)<<16) +#define FEC_MMFR_TA_10 (0x00020000) + +/* Bit definitions and macros for FEC_MSCR */ +#define FEC_MSCR_DIS_PREAMBLE (0x00000080) +#define FEC_MSCR_MII_SPEED(x) (((x)&0x3F)<<1) + +/* Bit definitions and macros for FEC_MIBC */ +#define FEC_MIBC_MIB_DISABLE (0x80000000) +#define FEC_MIBC_MIB_IDLE (0x40000000) + +/* Bit definitions and macros for FEC_RCR */ +#define FEC_RCR_MAX_FL(x) (((x)&0x7FF)<<16) +#define FEC_RCR_FCE (0x00000020) +#define FEC_RCR_BC_REJ (0x00000010) +#define FEC_RCR_PROM (0x00000008) +#define FEC_RCR_MII_MODE (0x00000004) +#define FEC_RCR_DRT (0x00000002) +#define FEC_RCR_LOOP (0x00000001) + +/* Bit definitions and macros for FEC_TCR */ +#define FEC_TCR_RFC_PAUSE (0x00000010) +#define FEC_TCR_TFC_PAUSE (0x00000008) +#define FEC_TCR_FDEN (0x00000004) +#define FEC_TCR_HBC (0x00000002) +#define FEC_TCR_GTS (0x00000001) + +/* Bit definitions and macros for FEC_PAUR */ +#define FEC_PAUR_PADDR2(x) (((x)&0xFFFF)<<16) +#define FEC_PAUR_TYPE(x) ((x)&0xFFFF) + +/* Bit definitions and macros for FEC_OPD */ +#define FEC_OPD_PAUSE_DUR(x) (((x)&0x0000FFFF)<<0) +#define FEC_OPD_OPCODE(x) (((x)&0x0000FFFF)<<16) + +/* Bit definitions and macros for FEC_TFWR */ +#define FEC_TFWR_X_WMRK(x) ((x)&0x03) +#define FEC_TFWR_X_WMRK_64 (0x01) +#define FEC_TFWR_X_WMRK_128 (0x02) +#define FEC_TFWR_X_WMRK_192 (0x03) + +/* Bit definitions and macros for FEC_FRBR */ +#define FEC_FRBR_R_BOUND(x) (((x)&0xFF)<<2) + +/* Bit definitions and macros for FEC_FRSR */ +#define FEC_FRSR_R_FSTART(x) (((x)&0xFF)<<2) + +/* Bit definitions and macros for FEC_ERDSR */ +#define FEC_ERDSR_R_DES_START(x)(((x)&0x3FFFFFFF)<<2) + +/* Bit definitions and macros for FEC_ETDSR */ +#define FEC_ETDSR_X_DES_START(x)(((x)&0x3FFFFFFF)<<2) + +/* Bit definitions and macros for FEC_EMRBR */ +#define FEC_EMRBR_R_BUF_SIZE(x) (((x)&0x7F)<<4) + +#define FEC_RESET_DELAY 100 +#define FEC_RX_TOUT 100 + +#endif /* CONFIG_MCFFEC */ +#endif /* fec_h */ diff --git a/include/asm-m68k/immap_5329.h b/include/asm-m68k/immap_5329.h new file mode 100644 index 00000000000..5ef1265f815 --- /dev/null +++ b/include/asm-m68k/immap_5329.h @@ -0,0 +1,793 @@ +/* + * MCF5329 Internal Memory Map + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __IMMAP_5329__ +#define __IMMAP_5329__ + +#define MMAP_SCM1 0xEC000000 +#define MMAP_MDHA 0xEC080000 +#define MMAP_SKHA 0xEC084000 +#define MMAP_RNG 0xEC088000 +#define MMAP_SCM2 0xFC000000 +#define MMAP_XBS 0xFC004000 +#define MMAP_FBCS 0xFC008000 +#define MMAP_CAN 0xFC020000 +#define MMAP_FEC 0xFC030000 +#define MMAP_SCM3 0xFC040000 +#define MMAP_EDMA 0xFC044000 +#define MMAP_TCD 0xFC045000 +#define MMAP_INTC0 0xFC048000 +#define MMAP_INTC1 0xFC04C000 +#define MMAP_INTCACK 0xFC054000 +#define MMAP_I2C 0xFC058000 +#define MMAP_QSPI 0xFC05C000 +#define MMAP_UART0 0xFC060000 +#define MMAP_UART1 0xFC064000 +#define MMAP_UART2 0xFC068000 +#define MMAP_DTMR0 0xFC070000 +#define MMAP_DTMR1 0xFC074000 +#define MMAP_DTMR2 0xFC078000 +#define MMAP_DTMR3 0xFC07C000 +#define MMAP_PIT0 0xFC080000 +#define MMAP_PIT1 0xFC084000 +#define MMAP_PIT2 0xFC088000 +#define MMAP_PIT3 0xFC08C000 +#define MMAP_PWM 0xFC090000 +#define MMAP_EPORT 0xFC094000 +#define MMAP_WDOG 0xFC098000 +#define MMAP_CCM 0xFC0A0000 +#define MMAP_GPIO 0xFC0A4000 +#define MMAP_RTC 0xFC0A8000 +#define MMAP_LCDC 0xFC0AC000 +#define MMAP_USBOTG 0xFC0B0000 +#define MMAP_USBH 0xFC0B4000 +#define MMAP_SDRAM 0xFC0B8000 +#define MMAP_SSI 0xFC0BC000 +#define MMAP_PLL 0xFC0C0000 + +/* System control module registers */ +typedef struct scm1_ctrl { + u32 mpr0; /* 0x00 Master Privilege Register 0 */ + u32 res1[15]; /* 0x04 - 0x3F */ + u32 pacrh; /* 0x40 Peripheral Access Control Register H */ + u32 res2[3]; /* 0x44 - 0x53 */ + u32 bmt0; /*0x54 Bus Monitor Timeout 0 */ +} scm1_t; + +/* Message Digest Hardware Accelerator */ +typedef struct mdha_ctrl { + u32 mdmr; /* 0x00 MDHA Mode Register */ + u32 mdcr; /* 0x04 Control register */ + u32 mdcmr; /* 0x08 Command Register */ + u32 mdsr; /* 0x0C Status Register */ + u32 mdisr; /* 0x10 Interrupt Status Register */ + u32 mdimr; /* 0x14 Interrupt Mask Register */ + u32 mddsr; /* 0x1C Data Size Register */ + u32 mdin; /* 0x20 Input FIFO */ + u32 res1[3]; /* 0x24 - 0x2F */ + u32 mdao; /* 0x30 Message Digest AO Register */ + u32 mdbo; /* 0x34 Message Digest BO Register */ + u32 mdco; /* 0x38 Message Digest CO Register */ + u32 mddo; /* 0x3C Message Digest DO Register */ + u32 mdeo; /* 0x40 Message Digest EO Register */ + u32 mdmds; /* 0x44 Message Data Size Register */ + u32 res[10]; /* 0x48 - 0x6F */ + u32 mda1; /* 0x70 Message Digest A1 Register */ + u32 mdb1; /* 0x74 Message Digest B1 Register */ + u32 mdc1; /* 0x78 Message Digest C1 Register */ + u32 mdd1; /* 0x7C Message Digest D1 Register */ + u32 mde1; /* 0x80 Message Digest E1 Register */ +} mdha_t; + +/* Symmetric Key Hardware Accelerator */ +typedef struct skha_ctrl { + u32 mr; /* 0x00 Mode Register */ + u32 cr; /* 0x04 Control Register */ + u32 cmr; /* 0x08 Command Register */ + u32 sr; /* 0x0C Status Register */ + u32 esr; /* 0x10 Error Status Register */ + u32 emr; /* 0x14 Error Status Mask Register) */ + u32 ksr; /* 0x18 Key Size Register */ + u32 dsr; /* 0x1C Data Size Register */ + u32 in; /* 0x20 Input FIFO */ + u32 out; /* 0x24 Output FIFO */ + u32 res1[2]; /* 0x28 - 0x2F */ + u32 kdr1; /* 0x30 Key Data Register 1 */ + u32 kdr2; /* 0x34 Key Data Register 2 */ + u32 kdr3; /* 0x38 Key Data Register 3 */ + u32 kdr4; /* 0x3C Key Data Register 4 */ + u32 kdr5; /* 0x40 Key Data Register 5 */ + u32 kdr6; /* 0x44 Key Data Register 6 */ + u32 res2[10]; /* 0x48 - 0x6F */ + u32 c1; /* 0x70 Context 1 */ + u32 c2; /* 0x74 Context 2 */ + u32 c3; /* 0x78 Context 3 */ + u32 c4; /* 0x7C Context 4 */ + u32 c5; /* 0x80 Context 5 */ + u32 c6; /* 0x84 Context 6 */ + u32 c7; /* 0x88 Context 7 */ + u32 c8; /* 0x8C Context 8 */ + u32 c9; /* 0x90 Context 9 */ + u32 c10; /* 0x94 Context 10 */ + u32 c11; /* 0x98 Context 11 */ +} skha_t; + +/* Random Number Generator */ +typedef struct rng_ctrl { + u32 rngcr; /* 0x00 RNG Control Register */ + u32 rngsr; /* 0x04 RNG Status Register */ + u32 rnger; /* 0x08 RNG Entropy Register */ + u32 rngout; /* 0x0C RNG Output FIFO */ +} rng_t; + +/* System control module registers 2 */ +typedef struct scm2_ctrl { + u32 mpr1; /* 0x00 Master Privilege Register */ + u32 res1[7]; /* 0x04 - 0x1F */ + u32 pacra; /* 0x20 Peripheral Access Control Register A */ + u32 pacrb; /* 0x24 Peripheral Access Control Register B */ + u32 pacrc; /* 0x28 Peripheral Access Control Register C */ + u32 pacrd; /* 0x2C Peripheral Access Control Register D */ + u32 res2[4]; /* 0x30 - 0x3F */ + u32 pacre; /* 0x40 Peripheral Access Control Register E */ + u32 pacrf; /* 0x44 Peripheral Access Control Register F */ + u32 pacrg; /* 0x48 Peripheral Access Control Register G */ + u32 res3[2]; /* 0x4C - 0x53 */ + u32 bmt1; /* 0x54 Bus Monitor Timeout 1 */ +} scm2_t; + +/* Cross-Bar Switch Module */ +typedef struct xbs_ctrl { + u32 prs1; /* 0x100 Priority Register Slave 1 */ + u32 res1[3]; /* 0x104 - 0F */ + u32 crs1; /* 0x110 Control Register Slave 1 */ + u32 res2[187]; /* 0x114 - 0x3FF */ + + u32 prs4; /* 0x400 Priority Register Slave 4 */ + u32 res3[3]; /* 0x404 - 0F */ + u32 crs4; /* 0x410 Control Register Slave 4 */ + u32 res4[123]; /* 0x414 - 0x5FF */ + + u32 prs6; /* 0x600 Priority Register Slave 6 */ + u32 res5[3]; /* 0x604 - 0F */ + u32 crs6; /* 0x610 Control Register Slave 6 */ + u32 res6[59]; /* 0x614 - 0x6FF */ + + u32 prs7; /* 0x700 Priority Register Slave 7 */ + u32 res7[3]; /* 0x704 - 0F */ + u32 crs7; /* 0x710 Control Register Slave 7 */ +} xbs_t; + +/* Flexbus module Chip select registers */ +typedef struct fbcs_ctrl { + u16 csar0; /* 0x00 Chip-Select Address Register 0 */ + u16 res0; + u32 csmr0; /* 0x04 Chip-Select Mask Register 0 */ + u32 cscr0; /* 0x08 Chip-Select Control Register 0 */ + + u16 csar1; /* 0x0C Chip-Select Address Register 1 */ + u16 res1; + u32 csmr1; /* 0x10 Chip-Select Mask Register 1 */ + u32 cscr1; /* 0x14 Chip-Select Control Register 1 */ + + u16 csar2; /* 0x18 Chip-Select Address Register 2 */ + u16 res2; + u32 csmr2; /* 0x1C Chip-Select Mask Register 2 */ + u32 cscr2; /* 0x20 Chip-Select Control Register 2 */ + + u16 csar3; /* 0x24 Chip-Select Address Register 3 */ + u16 res3; + u32 csmr3; /* 0x28 Chip-Select Mask Register 3 */ + u32 cscr3; /* 0x2C Chip-Select Control Register 3 */ + + u16 csar4; /* 0x30 Chip-Select Address Register 4 */ + u16 res4; + u32 csmr4; /* 0x34 Chip-Select Mask Register 4 */ + u32 cscr4; /* 0x38 Chip-Select Control Register 4 */ + + u16 csar5; /* 0x3C Chip-Select Address Register 5 */ + u16 res5; + u32 csmr5; /* 0x40 Chip-Select Mask Register 5 */ + u32 cscr5; /* 0x44 Chip-Select Control Register 5 */ +} fbcs_t; + +/* FlexCan module registers */ +typedef struct can_ctrl { + u32 mcr; /* 0x00 Module Configuration register */ + u32 ctrl; /* 0x04 Control register */ + u32 timer; /* 0x08 Free Running Timer */ + u32 res1; /* 0x0C */ + u32 rxgmask; /* 0x10 Rx Global Mask */ + u32 rx14mask; /* 0x14 RxBuffer 14 Mask */ + u32 rx15mask; /* 0x18 RxBuffer 15 Mask */ + u32 errcnt; /* 0x1C Error Counter Register */ + u32 errstat; /* 0x20 Error and status Register */ + u32 res2; /* 0x24 */ + u32 imask; /* 0x28 Interrupt Mask Register */ + u32 res3; /* 0x2C */ + u32 iflag; /* 0x30 Interrupt Flag Register */ + u32 res4[19]; /* 0x34 - 0x7F */ + u32 MB0_15[2048]; /* 0x80 Message Buffer 0-15 */ +} can_t; + +/* System Control Module register 3 */ +typedef struct scm3_ctrl { + u8 res1[19]; /* 0x00 - 0x12 */ + u8 wcr; /* 0x13 wakeup control register */ + u16 res2; /* 0x14 - 0x15 */ + u16 cwcr; /* 0x16 Core Watchdog Control Register */ + u8 res3[3]; /* 0x18 - 0x1A */ + u8 cwsr; /* 0x1B Core Watchdog Service Register */ + u8 res4[2]; /* 0x1C - 0x1D */ + u8 scmisr; /* 0x1F Interrupt Status Register */ + u32 res5; /* 0x20 */ + u32 bcr; /* 0x24 Burst Configuration Register */ + u32 res6[18]; /* 0x28 - 0x6F */ + u32 cfadr; /* 0x70 Core Fault Address Register */ + u8 res7[4]; /* 0x71 - 0x74 */ + u8 cfier; /* 0x75 Core Fault Interrupt Enable Register */ + u8 cfloc; /* 0x76 Core Fault Location Register */ + u8 cfatr; /* 0x77 Core Fault Attributes Register */ + u32 res8; /* 0x78 */ + u32 cfdtr; /* 0x7C Core Fault Data Register */ +} scm3_t; + +/* eDMA module registers */ +typedef struct edma_ctrl { + u32 cr; /* 0x00 Control Register */ + u32 es; /* 0x04 Error Status Register */ + u16 res1[3]; /* 0x08 - 0x0D */ + u16 erq; /* 0x0E Enable Request Register */ + u16 res2[3]; /* 0x10 - 0x15 */ + u16 eei; /* 0x16 Enable Error Interrupt Request */ + u8 serq; /* 0x18 Set Enable Request */ + u8 cerq; /* 0x19 Clear Enable Request */ + u8 seei; /* 0x1A Set Enable Error Interrupt Request */ + u8 ceei; /* 0x1B Clear Enable Error Interrupt Request */ + u8 cint; /* 0x1C Clear Interrupt Enable Register */ + u8 cerr; /* 0x1D Clear Error Register */ + u8 ssrt; /* 0x1E Set START Bit Register */ + u8 cdne; /* 0x1F Clear DONE Status Bit Register */ + u16 res3[3]; /* 0x20 - 0x25 */ + u16 intr; /* 0x26 Interrupt Request Register */ + u16 res4[3]; /* 0x28 - 0x2D */ + u16 err; /* 0x2E Error Register */ + u32 res5[52]; /* 0x30 - 0xFF */ + u8 dchpri0; /* 0x100 Channel 0 Priority Register */ + u8 dchpri1; /* 0x101 Channel 1 Priority Register */ + u8 dchpri2; /* 0x102 Channel 2 Priority Register */ + u8 dchpri3; /* 0x103 Channel 3 Priority Register */ + u8 dchpri4; /* 0x104 Channel 4 Priority Register */ + u8 dchpri5; /* 0x105 Channel 5 Priority Register */ + u8 dchpri6; /* 0x106 Channel 6 Priority Register */ + u8 dchpri7; /* 0x107 Channel 7 Priority Register */ + u8 dchpri8; /* 0x108 Channel 8 Priority Register */ + u8 dchpri9; /* 0x109 Channel 9 Priority Register */ + u8 dchpri10; /* 0x110 Channel 10 Priority Register */ + u8 dchpri11; /* 0x111 Channel 11 Priority Register */ + u8 dchpri12; /* 0x112 Channel 12 Priority Register */ + u8 dchpri13; /* 0x113 Channel 13 Priority Register */ + u8 dchpri14; /* 0x114 Channel 14 Priority Register */ + u8 dchpri15; /* 0x115 Channel 15 Priority Register */ +} edma_t; + +/* TCD - eDMA*/ +typedef struct tcd_ctrl { + u32 saddr; /* 0x00 Source Address */ + u16 attr; /* 0x04 Transfer Attributes */ + u16 soff; /* 0x06 Signed Source Address Offset */ + u32 nbytes; /* 0x08 Minor Byte Count */ + u32 slast; /* 0x0C Last Source Address Adjustment */ + u32 daddr; /* 0x10 Destination address */ + u16 citer; /* 0x14 Current Minor Loop Link, Major Loop Count */ + u16 doff; /* 0x16 Signed Destination Address Offset */ + u32 dlast_sga; /* 0x18 Last Destination Address Adjustment/Scatter Gather Address */ + u16 biter; /* 0x1C Beginning Minor Loop Link, Major Loop Count */ + u16 csr; /* 0x1E Control and Status */ +} tcd_st; + +typedef struct tcd_multiple { + tcd_st tcd[16]; +} tcd_t; + +/* Interrupt module registers */ +typedef struct int0_ctrl { + /* Interrupt Controller 0 */ + u32 iprh0; /* 0x00 Pending Register High */ + u32 iprl0; /* 0x04 Pending Register Low */ + u32 imrh0; /* 0x08 Mask Register High */ + u32 imrl0; /* 0x0C Mask Register Low */ + u32 frch0; /* 0x10 Force Register High */ + u32 frcl0; /* 0x14 Force Register Low */ + u16 res1; /* 0x18 - 0x19 */ + u16 icfg0; /* 0x1A Configuration Register */ + u8 simr0; /* 0x1C Set Interrupt Mask */ + u8 cimr0; /* 0x1D Clear Interrupt Mask */ + u8 clmask0; /* 0x1E Current Level Mask */ + u8 slmask; /* 0x1F Saved Level Mask */ + u32 res2[8]; /* 0x20 - 0x3F */ + u8 icr0[64]; /* 0x40 - 0x7F Control registers */ + u32 res3[24]; /* 0x80 - 0xDF */ + u8 swiack0; /* 0xE0 Software Interrupt Acknowledge */ + u8 res4[3]; /* 0xE1 - 0xE3 */ + u8 Lniack0_1; /* 0xE4 Level n interrupt acknowledge resister */ + u8 res5[3]; /* 0xE5 - 0xE7 */ + u8 Lniack0_2; /* 0xE8 Level n interrupt acknowledge resister */ + u8 res6[3]; /* 0xE9 - 0xEB */ + u8 Lniack0_3; /* 0xEC Level n interrupt acknowledge resister */ + u8 res7[3]; /* 0xED - 0xEF */ + u8 Lniack0_4; /* 0xF0 Level n interrupt acknowledge resister */ + u8 res8[3]; /* 0xF1 - 0xF3 */ + u8 Lniack0_5; /* 0xF4 Level n interrupt acknowledge resister */ + u8 res9[3]; /* 0xF5 - 0xF7 */ + u8 Lniack0_6; /* 0xF8 Level n interrupt acknowledge resister */ + u8 resa[3]; /* 0xF9 - 0xFB */ + u8 Lniack0_7; /* 0xFC Level n interrupt acknowledge resister */ + u8 resb[3]; /* 0xFD - 0xFF */ +} int0_t; + +typedef struct int1_ctrl { + /* Interrupt Controller 1 */ + u32 iprh1; /* 0x00 Pending Register High */ + u32 iprl1; /* 0x04 Pending Register Low */ + u32 imrh1; /* 0x08 Mask Register High */ + u32 imrl1; /* 0x0C Mask Register Low */ + u32 frch1; /* 0x10 Force Register High */ + u32 frcl1; /* 0x14 Force Register Low */ + u16 res1; /* 0x18 */ + u16 icfg1; /* 0x1A Configuration Register */ + u8 simr1; /* 0x1C Set Interrupt Mask */ + u8 cimr1; /* 0x1D Clear Interrupt Mask */ + u16 res2; /* 0x1E - 0x1F */ + u32 res3[8]; /* 0x20 - 0x3F */ + u8 icr1[64]; /* 0x40 - 0x7F */ + u32 res4[24]; /* 0x80 - 0xDF */ + u8 swiack1; /* 0xE0 Software Interrupt Acknowledge */ + u8 res5[3]; /* 0xE1 - 0xE3 */ + u8 Lniack1_1; /* 0xE4 Level n interrupt acknowledge resister */ + u8 res6[3]; /* 0xE5 - 0xE7 */ + u8 Lniack1_2; /* 0xE8 Level n interrupt acknowledge resister */ + u8 res7[3]; /* 0xE9 - 0xEB */ + u8 Lniack1_3; /* 0xEC Level n interrupt acknowledge resister */ + u8 res8[3]; /* 0xED - 0xEF */ + u8 Lniack1_4; /* 0xF0 Level n interrupt acknowledge resister */ + u8 res9[3]; /* 0xF1 - 0xF3 */ + u8 Lniack1_5; /* 0xF4 Level n interrupt acknowledge resister */ + u8 resa[3]; /* 0xF5 - 0xF7 */ + u8 Lniack1_6; /* 0xF8 Level n interrupt acknowledge resister */ + u8 resb[3]; /* 0xF9 - 0xFB */ + u8 Lniack1_7; /* 0xFC Level n interrupt acknowledge resister */ + u8 resc[3]; /* 0xFD - 0xFF */ +} int1_t; + +typedef struct intgack_ctrl1 { + /* Global IACK Registers */ + u8 swiack; /* 0xE0 Global Software Interrupt Acknowledge */ + u8 Lniack[7]; /* 0xE1 - 0xE7 Global Level 0 Interrupt Acknowledge */ +} intgack_t; + +/*I2C module registers */ +typedef struct i2c_ctrl { + u8 adr; /* 0x00 address register */ + u8 res1[3]; /* 0x01 - 0x03 */ + u8 fdr; /* 0x04 frequency divider register */ + u8 res2[3]; /* 0x05 - 0x07 */ + u8 cr; /* 0x08 control register */ + u8 res3[3]; /* 0x09 - 0x0B */ + u8 sr; /* 0x0C status register */ + u8 res4[3]; /* 0x0D - 0x0F */ + u8 dr; /* 0x10 data register */ + u8 res5[3]; /* 0x11 - 0x13 */ +} i2c_t; + +/* QSPI module registers */ +typedef struct qspi_ctrl { + u16 qmr; /* Mode register */ + u16 res1; + u16 qdlyr; /* Delay register */ + u16 res2; + u16 qwr; /* Wrap register */ + u16 res3; + u16 qir; /* Interrupt register */ + u16 res4; + u16 qar; /* Address register */ + u16 res5; + u16 qdr; /* Data register */ + u16 res6; +} qspi_t; + +/* PWM module registers */ +typedef struct pwm_ctrl { + u8 en; /* 0x00 PWM Enable Register */ + u8 pol; /* 0x01 Polarity Register */ + u8 clk; /* 0x02 Clock Select Register */ + u8 prclk; /* 0x03 Prescale Clock Select Register */ + u8 cae; /* 0x04 Center Align Enable Register */ + u8 ctl; /* 0x05 Control Register */ + u8 res1[2]; /* 0x06 - 0x07 */ + u8 scla; /* 0x08 Scale A register */ + u8 sclb; /* 0x09 Scale B register */ + u8 res2[2]; /* 0x0A - 0x0B */ + u8 cnt0; /* 0x0C Channel 0 Counter register */ + u8 cnt1; /* 0x0D Channel 1 Counter register */ + u8 cnt2; /* 0x0E Channel 2 Counter register */ + u8 cnt3; /* 0x0F Channel 3 Counter register */ + u8 cnt4; /* 0x10 Channel 4 Counter register */ + u8 cnt5; /* 0x11 Channel 5 Counter register */ + u8 cnt6; /* 0x12 Channel 6 Counter register */ + u8 cnt7; /* 0x13 Channel 7 Counter register */ + u8 per0; /* 0x14 Channel 0 Period register */ + u8 per1; /* 0x15 Channel 1 Period register */ + u8 per2; /* 0x16 Channel 2 Period register */ + u8 per3; /* 0x17 Channel 3 Period register */ + u8 per4; /* 0x18 Channel 4 Period register */ + u8 per5; /* 0x19 Channel 5 Period register */ + u8 per6; /* 0x1A Channel 6 Period register */ + u8 per7; /* 0x1B Channel 7 Period register */ + u8 dty0; /* 0x1C Channel 0 Duty register */ + u8 dty1; /* 0x1D Channel 1 Duty register */ + u8 dty2; /* 0x1E Channel 2 Duty register */ + u8 dty3; /* 0x1F Channel 3 Duty register */ + u8 dty4; /* 0x20 Channel 4 Duty register */ + u8 dty5; /* 0x21 Channel 5 Duty register */ + u8 dty6; /* 0x22 Channel 6 Duty register */ + u8 dty7; /* 0x23 Channel 7 Duty register */ + u8 sdn; /* 0x24 Shutdown register */ + u8 res3[3]; /* 0x25 - 0x27 */ +} pwm_t; + +/* Edge Port module registers */ +typedef struct eport_ctrl { + u16 par; /* 0x00 Pin Assignment Register */ + u8 ddar; /* 0x02 Data Direction Register */ + u8 ier; /* 0x03 Interrupt Enable Register */ + u8 dr; /* 0x04 Data Register */ + u8 pdr; /* 0x05 Pin Data Register */ + u8 fr; /* 0x06 Flag_Register */ + u8 res1; +} eport_t; + +/* Watchdog registers */ +typedef struct wdog_ctrl { + u16 cr; /* 0x00 Control register */ + u16 mr; /* 0x02 Modulus register */ + u16 cntr; /* 0x04 Count register */ + u16 sr; /* 0x06 Service register */ +} wdog_t; + +/*Chip configuration module registers */ +typedef struct ccm_ctrl { + u8 rstctrl; /* 0x00 Reset Controller register */ + u8 rststat; /* 0x01 Reset Status register */ + u16 res1; /* 0x02 - 0x03 */ + u16 ccr; /* 0x04 Chip configuration register */ + u16 res2; /* 0x06 */ + u16 rcon; /* 0x08 Rreset configuration register */ + u16 cir; /* 0x0A Chip identification register */ + u32 res3; /* 0x0C */ + u16 misccr; /* 0x10 Miscellaneous control register */ + u16 cdr; /* 0x12 Clock divider register */ + u16 uhcsr; /* 0x14 USB Host controller status register */ + u16 uocsr; /* 0x16 USB On-the-Go Controller Status Register */ +} ccm_t; + +/* GPIO port registers */ +typedef struct gpio_ctrl { + /* Port Output Data Registers */ + u8 podr_fech; /* 0x00 */ + u8 podr_fecl; /* 0x01 */ + u8 podr_ssi; /* 0x02 */ + u8 podr_busctl; /* 0x03 */ + u8 podr_be; /* 0x04 */ + u8 podr_cs; /* 0x05 */ + u8 podr_pwm; /* 0x06 */ + u8 podr_feci2c; /* 0x07 */ + u8 res1; /* 0x08 */ + u8 podr_uart; /* 0x09 */ + u8 podr_qspi; /* 0x0A */ + u8 podr_timer; /* 0x0B */ + u8 res2; /* 0x0C */ + u8 podr_lcddatah; /* 0x0D */ + u8 podr_lcddatam; /* 0x0E */ + u8 podr_lcddatal; /* 0x0F */ + u8 podr_lcdctlh; /* 0x10 */ + u8 podr_lcdctll; /* 0x11 */ + + /* Port Data Direction Registers */ + u16 res3; /* 0x12 - 0x13 */ + u8 pddr_fech; /* 0x14 */ + u8 pddr_fecl; /* 0x15 */ + u8 pddr_ssi; /* 0x16 */ + u8 pddr_busctl; /* 0x17 */ + u8 pddr_be; /* 0x18 */ + u8 pddr_cs; /* 0x19 */ + u8 pddr_pwm; /* 0x1A */ + u8 pddr_feci2c; /* 0x1B */ + u8 res4; /* 0x1C */ + u8 pddr_uart; /* 0x1D */ + u8 pddr_qspi; /* 0x1E */ + u8 pddr_timer; /* 0x1F */ + u8 res5; /* 0x20 */ + u8 pddr_lcddatah; /* 0x21 */ + u8 pddr_lcddatam; /* 0x22 */ + u8 pddr_lcddatal; /* 0x23 */ + u8 pddr_lcdctlh; /* 0x24 */ + u8 pddr_lcdctll; /* 0x25 */ + u16 res6; /* 0x26 - 0x27 */ + + /* Port Data Direction Registers */ + u8 ppd_fech; /* 0x28 */ + u8 ppd_fecl; /* 0x29 */ + u8 ppd_ssi; /* 0x2A */ + u8 ppd_busctl; /* 0x2B */ + u8 ppd_be; /* 0x2C */ + u8 ppd_cs; /* 0x2D */ + u8 ppd_pwm; /* 0x2E */ + u8 ppd_feci2c; /* 0x2F */ + u8 res7; /* 0x30 */ + u8 ppd_uart; /* 0x31 */ + u8 ppd_qspi; /* 0x32 */ + u8 ppd_timer; /* 0x33 */ + u8 res8; /* 0x34 */ + u8 ppd_lcddatah; /* 0x35 */ + u8 ppd_lcddatam; /* 0x36 */ + u8 ppd_lcddatal; /* 0x37 */ + u8 ppd_lcdctlh; /* 0x38 */ + u8 ppd_lcdctll; /* 0x39 */ + u16 res9; /* 0x3A - 0x3B */ + + /* Port Clear Output Data Registers */ + u8 pclrr_fech; /* 0x3C */ + u8 pclrr_fecl; /* 0x3D */ + u8 pclrr_ssi; /* 0x3E */ + u8 pclrr_busctl; /* 0x3F */ + u8 pclrr_be; /* 0x40 */ + u8 pclrr_cs; /* 0x41 */ + u8 pclrr_pwm; /* 0x42 */ + u8 pclrr_feci2c; /* 0x43 */ + u8 res10; /* 0x44 */ + u8 pclrr_uart; /* 0x45 */ + u8 pclrr_qspi; /* 0x46 */ + u8 pclrr_timer; /* 0x47 */ + u8 res11; /* 0x48 */ + u8 pclrr_lcddatah; /* 0x49 */ + u8 pclrr_lcddatam; /* 0x4A */ + u8 pclrr_lcddatal; /* 0x4B */ + u8 pclrr_lcdctlh; /* 0x4C */ + u8 pclrr_lcdctll; /* 0x4D */ + u16 res12; /* 0x4E - 0x4F */ + + /* Pin Assignment Registers */ + u8 par_fec; /* 0x50 */ + u8 par_pwm; /* 0x51 */ + u8 par_busctl; /* 0x52 */ + u8 par_feci2c; /* 0x53 */ + u8 par_be; /* 0x54 */ + u8 par_cs; /* 0x55 */ + u16 par_ssi; /* 0x56 */ + u16 par_uart; /* 0x58 */ + u16 par_qspi; /* 0x5A */ + u8 par_timer; /* 0x5C */ + u8 par_lcddata; /* 0x5D */ + u16 par_lcdctl; /* 0x5E */ + u16 par_irq; /* 0x60 */ + u16 res16; /* 0x62 - 0x63 */ + + /* Mode Select Control Registers */ + u8 mscr_flexbus; /* 0x64 */ + u8 mscr_sdram; /* 0x65 */ + u16 res17; /* 0x66 - 0x67 */ + + /* Drive Strength Control Registers */ + u8 dscr_i2c; /* 0x68 */ + u8 dscr_pwm; /* 0x69 */ + u8 dscr_fec; /* 0x6A */ + u8 dscr_uart; /* 0x6B */ + u8 dscr_qspi; /* 0x6C */ + u8 dscr_timer; /* 0x6D */ + u8 dscr_ssi; /* 0x6E */ + u8 dscr_lcd; /* 0x6F */ + u8 dscr_debug; /* 0x70 */ + u8 dscr_clkrst; /* 0x71 */ + u8 dscr_irq; /* 0x72 */ +} gpio_t; + +/* LCD module registers */ +typedef struct lcd_ctrl { + u32 ssar; /* 0x00 Screen Start Address Register */ + u32 sr; /* 0x04 LCD Size Register */ + u32 vpw; /* 0x08 Virtual Page Width Register */ + u32 cpr; /* 0x0C Cursor Position Register */ + u32 cwhb; /* 0x10 Cursor Width Height and Blink Register */ + u32 ccmr; /* 0x14 Color Cursor Mapping Register */ + u32 pcr; /* 0x18 Panel Configuration Register */ + u32 hcr; /* 0x1C Horizontal Configuration Register */ + u32 vcr; /* 0x20 Vertical Configuration Register */ + u32 por; /* 0x24 Panning Offset Register */ + u32 scr; /* 0x28 Sharp Configuration Register */ + u32 pccr; /* 0x2C PWM Contrast Control Register */ + u32 dcr; /* 0x30 DMA Control Register */ + u32 rmcr; /* 0x34 Refresh Mode Control Register */ + u32 icr; /* 0x38 Refresh Mode Control Register */ + u32 ier; /* 0x3C Interrupt Enable Register */ + u32 isr; /* 0x40 Interrupt Status Register */ + u32 res[4]; + u32 gwsar; /* 0x50 Graphic Window Start Address Register */ + u32 gwsr; /* 0x54 Graphic Window Size Register */ + u32 gwvpw; /* 0x58 Graphic Window Virtual Page Width Register */ + u32 gwpor; /* 0x5C Graphic Window Panning Offset Register */ + u32 gwpr; /* 0x60 Graphic Window Position Register */ + u32 gwcr; /* 0x64 Graphic Window Control Register */ + u32 gwdcr; /* 0x68 Graphic Window DMA Control Register */ +} lcd_t; + +typedef struct lcdbg_ctrl { + u32 bglut[255]; +} lcdbg_t; + +typedef struct lcdgw_ctrl { + u32 gwlut[255]; +} lcdgw_t; + +/* USB OTG module registers */ +typedef struct usb_otg { + u32 id; /* 0x000 Identification Register */ + u32 hwgeneral; /* 0x004 General HW Parameters */ + u32 hwhost; /* 0x008 Host HW Parameters */ + u32 hwdev; /* 0x00C Device HW parameters */ + u32 hwtxbuf; /* 0x010 TX Buffer HW Parameters */ + u32 hwrxbuf; /* 0x014 RX Buffer HW Parameters */ + u32 res1[58]; /* 0x18 - 0xFF */ + u8 caplength; /* 0x100 Capability Register Length */ + u8 res2; /* 0x101 */ + u16 hciver; /* 0x102 Host Interface Version Number */ + u32 hcsparams; /* 0x104 Host Structural Parameters */ + u32 hccparams; /* 0x108 Host Capability Parameters */ + u32 res3[5]; /* 0x10C - 0x11F */ + u16 dciver; /* 0x120 Device Interface Version Number */ + u16 res4; /* 0x122 */ + u32 dccparams; /* 0x124 Device Capability Parameters */ + u32 res5[6]; /* 0x128 - 0x13F */ + u32 cmd; /* 0x140 USB Command */ + u32 sts; /* 0x144 USB Status */ + u32 intr; /* 0x148 USB Interrupt Enable */ + u32 frindex; /* 0x14C USB Frame Index */ + u32 res6; /* 0x150 */ + u32 prd_dev; /* 0x154 Periodic Frame List Base or Device Address */ + u32 aync_ep; /* 0x158 Current Asynchronous List or Address at Endpoint List Address */ + u32 ttctrl; /* 0x15C Host TT Asynchronous Buffer Control */ + u32 burstsize; /* 0x160 Master Interface Data Burst Size */ + u32 txfill; /* 0x164 Host Transmit FIFO Tuning Control */ + u32 res7[6]; /* 0x168 - 0x17F */ + u32 cfgflag; /* 0x180 Configure Flag Register */ + u32 portsc1; /* 0x184 Port Status/Control */ + u32 res8[7]; /* 0x188 - 0x1A3 */ + u32 otgsc; /* 0x1A4 On The Go Status and Control */ + u32 mode; /* 0x1A8 USB mode register */ + u32 eptsetstat; /* 0x1AC Endpoint Setup status */ + u32 eptprime; /* 0x1B0 Endpoint initialization */ + u32 eptflush; /* 0x1B4 Endpoint de-initialize */ + u32 eptstat; /* 0x1B8 Endpoint status */ + u32 eptcomplete; /* 0x1BC Endpoint Complete */ + u32 eptctrl0; /* 0x1C0 Endpoint control 0 */ + u32 eptctrl1; /* 0x1C4 Endpoint control 1 */ + u32 eptctrl2; /* 0x1C8 Endpoint control 2 */ + u32 eptctrl3; /* 0x1CC Endpoint control 3 */ +} usbotg_t; + +/* USB Host module registers */ +typedef struct usb_host { + u32 id; /* 0x000 Identification Register */ + u32 hwgeneral; /* 0x004 General HW Parameters */ + u32 hwhost; /* 0x008 Host HW Parameters */ + u32 res1; /* 0x0C */ + u32 hwtxbuf; /* 0x010 TX Buffer HW Parameters */ + u32 hwrxbuf; /* 0x014 RX Buffer HW Parameters */ + u32 res2[58]; /* 0x18 - 0xFF */ + + /* Host Controller Capability Register */ + u8 caplength; /* 0x100 Capability Register Length */ + u8 res3; /* 0x101 */ + u16 hciver; /* 0x102 Host Interface Version Number */ + u32 hcsparams; /* 0x104 Host Structural Parameters */ + u32 hccparams; /* 0x108 Host Capability Parameters */ + u32 res4[13]; /* 0x10C - 0x13F */ + + /* Host Controller Operational Register */ + u32 cmd; /* 0x140 USB Command */ + u32 sts; /* 0x144 USB Status */ + u32 intr; /* 0x148 USB Interrupt Enable */ + u32 frindex; /* 0x14C USB Frame Index */ + u32 res5; /* 0x150 (ctrl segment register in EHCI spec) */ + u32 prdlst; /* 0x154 Periodic Frame List Base Address */ + u32 aynclst; /* 0x158 Current Asynchronous List Address */ + u32 ttctrl; /* 0x15C Host TT Asynchronous Buffer Control (non-ehci) */ + u32 burstsize; /* 0x160 Master Interface Data Burst Size (non-ehci) */ + u32 txfill; /* 0x164 Host Transmit FIFO Tuning Control (non-ehci) */ + u32 res6[6]; /* 0x168 - 0x17F */ + u32 cfgflag; /* 0x180 Configure Flag Register */ + u32 portsc1; /* 0x184 Port Status/Control */ + u32 res7[8]; /* 0x188 - 0x1A7 */ + + /* non-ehci registers */ + u32 mode; /* 0x1A8 USB mode register */ + u32 eptsetstat; /* 0x1AC Endpoint Setup status */ + u32 eptprime; /* 0x1B0 Endpoint initialization */ + u32 eptflush; /* 0x1B4 Endpoint de-initialize */ + u32 eptstat; /* 0x1B8 Endpoint status */ + u32 eptcomplete; /* 0x1BC Endpoint Complete */ + u32 eptctrl0; /* 0x1C0 Endpoint control 0 */ + u32 eptctrl1; /* 0x1C4 Endpoint control 1 */ + u32 eptctrl2; /* 0x1C8 Endpoint control 2 */ + u32 eptctrl3; /* 0x1CC Endpoint control 3 */ +} usbhost_t; + +/* SDRAM controller registers */ +typedef struct sdram_ctrl { + u32 mode; /* 0x00 Mode/Extended Mode register */ + u32 ctrl; /* 0x04 Control register */ + u32 cfg1; /* 0x08 Configuration register 1 */ + u32 cfg2; /* 0x0C Configuration register 2 */ + u32 res1[64]; /* 0x10 - 0x10F */ + u32 cs0; /* 0x110 Chip Select 0 Configuration */ + u32 cs1; /* 0x114 Chip Select 1 Configuration */ +} sdram_t; + +/* Synchronous serial interface */ +typedef struct ssi_ctrl { + u32 tx0; /* 0x00 Transmit Data Register 0 */ + u32 tx1; /* 0x04 Transmit Data Register 1 */ + u32 rx0; /* 0x08 Receive Data Register 0 */ + u32 rx1; /* 0x0C Receive Data Register 1 */ + u32 cr; /* 0x10 Control Register */ + u32 isr; /* 0x14 Interrupt Status Register */ + u32 ier; /* 0x18 Interrupt Enable Register */ + u32 tcr; /* 0x1C Transmit Configuration Register */ + u32 rcr; /* 0x20 Receive Configuration Register */ + u32 ccr; /* 0x24 Clock Control Register */ + u32 res1; /* 0x28 */ + u32 fcsr; /* 0x2C FIFO Control/Status Register */ + u32 res2[2]; /* 0x30 - 0x37 */ + u32 acr; /* 0x38 AC97 Control Register */ + u32 acadd; /* 0x3C AC97 Command Address Register */ + u32 acdat; /* 0x40 AC97 Command Data Register */ + u32 atag; /* 0x44 AC97 Tag Register */ + u32 tmask; /* 0x48 Transmit Time Slot Mask Register */ + u32 rmask; /* 0x4C Receive Time Slot Mask Register */ +} ssi_t; + +/* Clock Module registers */ +typedef struct pll_ctrl { + u8 podr; /* 0x00 Output Divider Register */ + u8 res1[3]; + u8 pcr; /* 0x04 Control Register */ + u8 res2[3]; + u8 pmdr; /* 0x08 Modulation Divider Register */ + u8 res3[3]; + u8 pfdr; /* 0x0C Feedback Divider Register */ + u8 res4[3]; +} pll_t; + +#endif /* __IMMAP_5329__ */ diff --git a/include/asm-m68k/io.h b/include/asm-m68k/io.h index 7bbdefba760..cec25d0bf7d 100644 --- a/include/asm-m68k/io.h +++ b/include/asm-m68k/io.h @@ -1,8 +1,214 @@ -#ifndef __ASM_M68K_IO_H_ -#define __ASM_M68K_IO_H_ +/* + * IO header file + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ -static inline void sync(void) + #ifndef __ASM_M68K_IO_H__ +#define __ASM_M68K_IO_H__ + +#include + +#define readb(addr) in_8((volatile u8 *)(addr)) +#define writeb(b,addr) out_8((volatile u8 *)(addr), (b)) +#if !defined(__BIG_ENDIAN) +#define readw(addr) (*(volatile u16 *) (addr)) +#define readl(addr) (*(volatile u32 *) (addr)) +#define writew(b,addr) ((*(volatile u16 *) (addr)) = (b)) +#define writel(b,addr) ((*(volatile u32 *) (addr)) = (b)) +#else +#define readw(addr) in_le16((volatile u16 *)(addr)) +#define readl(addr) in_le32((volatile u32 *)(addr)) +#define writew(b,addr) out_le16((volatile u16 *)(addr),(b)) +#define writel(b,addr) out_le32((volatile u32 *)(addr),(b)) +#endif + +/* + * The insw/outsw/insl/outsl macros don't do byte-swapping. + * They are only used in practice for transferring buffers which + * are arrays of bytes, and byte-swapping is not appropriate in + * that case. - paulus + */ +#define insb(port, buf, ns) _insb((u8 *)((port)+_IO_BASE), (buf), (ns)) +#define outsb(port, buf, ns) _outsb((u8 *)((port)+_IO_BASE), (buf), (ns)) +#define insw(port, buf, ns) _insw_ns((u16 *)((port)+_IO_BASE), (buf), (ns)) +#define outsw(port, buf, ns) _outsw_ns((u16 *)((port)+_IO_BASE), (buf), (ns)) +#define insl(port, buf, nl) _insl_ns((u32 *)((port)+_IO_BASE), (buf), (nl)) +#define outsl(port, buf, nl) _outsl_ns((u32 *)((port)+_IO_BASE), (buf), (nl)) + +#define inb(port) in_8((u8 *)((port)+_IO_BASE)) +#define outb(val, port) out_8((u8 *)((port)+_IO_BASE), (val)) +#if !defined(__BIG_ENDIAN) +#define inw(port) in_be16((u16 *)((port)+_IO_BASE)) +#define outw(val, port) out_be16((u16 *)((port)+_IO_BASE), (val)) +#define inl(port) in_be32((u32 *)((port)+_IO_BASE)) +#define outl(val, port) out_be32((u32 *)((port)+_IO_BASE), (val)) +#else +#define inw(port) in_le16((u16 *)((port)+_IO_BASE)) +#define outw(val, port) out_le16((u16 *)((port)+_IO_BASE), (val)) +#define inl(port) in_le32((u32 *)((port)+_IO_BASE)) +#define outl(val, port) out_le32((u32 *)((port)+_IO_BASE), (val)) +#endif + +extern inline void _insb(volatile u8 * port, void *buf, int ns) +{ + u8 *data = (u8 *) buf; + while (ns--) + *data++ = *port; +} + +extern inline void _outsb(volatile u8 * port, const void *buf, int ns) +{ + u8 *data = (u8 *) buf; + while (ns--) + *port = *data++; +} + +extern inline void _insw(volatile u16 * port, void *buf, int ns) +{ + u16 *data = (u16 *) buf; + while (ns--) + *data++ = __sw16(*port); +} + +extern inline void _outsw(volatile u16 * port, const void *buf, int ns) +{ + u16 *data = (u16 *) buf; + while (ns--) { + *port = __sw16(*data); + data++; + } +} + +extern inline void _insl(volatile u32 * port, void *buf, int nl) +{ + u32 *data = (u32 *) buf; + while (nl--) + *data++ = __sw32(*port); +} + +extern inline void _outsl(volatile u32 * port, const void *buf, int nl) +{ + u32 *data = (u32 *) buf; + while (nl--) { + *port = __sw32(*data); + data++; + } +} + +extern inline void _insw_ns(volatile u16 * port, void *buf, int ns) +{ + u16 *data = (u16 *) buf; + while (ns--) + *data++ = *port; +} + +extern inline void _outsw_ns(volatile u16 * port, const void *buf, int ns) +{ + u16 *data = (u16 *) buf; + while (ns--) { + *port = *data++; + } +} + +extern inline void _insl_ns(volatile u32 * port, void *buf, int nl) +{ + u32 *data = (u32 *) buf; + while (nl--) + *data++ = *port; +} + +extern inline void _outsl_ns(volatile u32 * port, const void *buf, int nl) +{ + u32 *data = (u32 *) buf; + while (nl--) { + *port = *data; + data++; + } +} + +/* + * The *_ns versions below don't do byte-swapping. + * Neither do the standard versions now, these are just here + * for older code. + */ +#define insw_ns(port, buf, ns) _insw_ns((u16 *)((port)+_IO_BASE), (buf), (ns)) +#define outsw_ns(port, buf, ns) _outsw_ns((u16 *)((port)+_IO_BASE), (buf), (ns)) +#define insl_ns(port, buf, nl) _insl_ns((u32 *)((port)+_IO_BASE), (buf), (nl)) +#define outsl_ns(port, buf, nl) _outsl_ns((u32 *)((port)+_IO_BASE), (buf), (nl)) + +#define IO_SPACE_LIMIT ~0 + +/* + * 8, 16 and 32 bit, big and little endian I/O operations, with barrier. + */ +extern inline int in_8(volatile u8 * addr) +{ + return (int)*addr; +} + +extern inline void out_8(volatile u8 * addr, int val) +{ + *addr = (u8) val; +} + +extern inline int in_le16(volatile u16 * addr) +{ + return __sw16(*addr); +} + +extern inline int in_be16(volatile u16 * addr) +{ + return (*addr & 0xFFFF); +} + +extern inline void out_le16(volatile u16 * addr, int val) +{ + *addr = __sw16(val); +} + +extern inline void out_be16(volatile u16 * addr, int val) +{ + *addr = (u16) val; +} + +extern inline unsigned in_le32(volatile u32 * addr) +{ + return __sw32(*addr); +} + +extern inline unsigned in_be32(volatile u32 * addr) +{ + return (*addr); +} + +extern inline void out_le32(volatile unsigned *addr, int val) +{ + *addr = __sw32(val); +} + +extern inline void out_be32(volatile unsigned *addr, int val) { + *addr = val; } -#endif /* __ASM_M68K_IO_H_ */ +#endif /* __ASM_M68K_IO_H__ */ diff --git a/include/asm-m68k/m5329.h b/include/asm-m68k/m5329.h new file mode 100644 index 00000000000..15bb121ed17 --- /dev/null +++ b/include/asm-m68k/m5329.h @@ -0,0 +1,2023 @@ +/* + * mcf5329.h -- Definitions for Freescale Coldfire 5329 + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef mcf5329_h +#define mcf5329_h +/****************************************************************************/ + +/********************************************************************* +* System Control Module (SCM) +*********************************************************************/ +/* Bit definitions and macros for SCM_MPR */ +#define SCM_MPR_MPROT0(x) (((x)&0x0F)<<28) +#define SCM_MPR_MPROT1(x) (((x)&0x0F)<<24) +#define SCM_MPR_MPROT2(x) (((x)&0x0F)<<20) +#define SCM_MPR_MPROT4(x) (((x)&0x0F)<<12) +#define SCM_MPR_MPROT5(x) (((x)&0x0F)<<8) +#define SCM_MPR_MPROT6(x) (((x)&0x0F)<<4) +#define MPROT_MTR 4 +#define MPROT_MTW 2 +#define MPROT_MPL 1 + +/* Bit definitions and macros for SCM_BMT */ +#define BMT_BME (0x08) +#define BMT_8 (0x07) +#define BMT_16 (0x06) +#define BMT_32 (0x05) +#define BMT_64 (0x04) +#define BMT_128 (0x03) +#define BMT_256 (0x02) +#define BMT_512 (0x01) +#define BMT_1024 (0x00) + +/* Bit definitions and macros for SCM_PACRA */ +#define SCM_PACRA_PACR0(x) (((x)&0x0F)<<28) +#define SCM_PACRA_PACR1(x) (((x)&0x0F)<<24) +#define SCM_PACRA_PACR2(x) (((x)&0x0F)<<20) +#define PACR_SP 4 +#define PACR_WP 2 +#define PACR_TP 1 + +/* Bit definitions and macros for SCM_PACRB */ +#define SCM_PACRB_PACR8(x) (((x)&0x0F)<<28) +#define SCM_PACRB_PACR12(x) (((x)&0x0F)<<12) + +/* Bit definitions and macros for SCM_PACRC */ +#define SCM_PACRC_PACR16(x) (((x)&0x0F)<<28) +#define SCM_PACRC_PACR17(x) (((x)&0x0F)<<24) +#define SCM_PACRC_PACR18(x) (((x)&0x0F)<<20) +#define SCM_PACRC_PACR19(x) (((x)&0x0F)<<16) +#define SCM_PACRC_PACR21(x) (((x)&0x0F)<<8) +#define SCM_PACRC_PACR22(x) (((x)&0x0F)<<4) +#define SCM_PACRC_PACR23(x) (((x)&0x0F)<<0) + +/* Bit definitions and macros for SCM_PACRD */ +#define SCM_PACRD_PACR24(x) (((x)&0x0F)<<28) +#define SCM_PACRD_PACR25(x) (((x)&0x0F)<<24) +#define SCM_PACRD_PACR26(x) (((x)&0x0F)<<20) +#define SCM_PACRD_PACR28(x) (((x)&0x0F)<<12) +#define SCM_PACRD_PACR29(x) (((x)&0x0F)<<8) +#define SCM_PACRD_PACR30(x) (((x)&0x0F)<<4) +#define SCM_PACRD_PACR31(x) (((x)&0x0F)<<0) + +/* Bit definitions and macros for SCM_PACRE */ +#define SCM_PACRE_PACR32(x) (((x)&0x0F)<<28) +#define SCM_PACRE_PACR33(x) (((x)&0x0F)<<24) +#define SCM_PACRE_PACR34(x) (((x)&0x0F)<<20) +#define SCM_PACRE_PACR35(x) (((x)&0x0F)<<16) +#define SCM_PACRE_PACR36(x) (((x)&0x0F)<<12) +#define SCM_PACRE_PACR37(x) (((x)&0x0F)<<8) +#define SCM_PACRE_PACR38(x) (((x)&0x0F)<<4) + +/* Bit definitions and macros for SCM_PACRF */ +#define SCM_PACRF_PACR40(x) (((x)&0x0F)<<28) +#define SCM_PACRF_PACR41(x) (((x)&0x0F)<<24) +#define SCM_PACRF_PACR42(x) (((x)&0x0F)<<20) +#define SCM_PACRF_PACR43(x) (((x)&0x0F)<<16) +#define SCM_PACRF_PACR44(x) (((x)&0x0F)<<12) +#define SCM_PACRF_PACR45(x) (((x)&0x0F)<<8) +#define SCM_PACRF_PACR46(x) (((x)&0x0F)<<4) +#define SCM_PACRF_PACR47(x) (((x)&0x0F)<<0) + +/* Bit definitions and macros for SCM_PACRG */ +#define SCM_PACRG_PACR48(x) (((x)&0x0F)<<28) + +/* Bit definitions and macros for SCM_PACRH */ +#define SCM_PACRH_PACR56(x) (((x)&0x0F)<<28) +#define SCM_PACRH_PACR57(x) (((x)&0x0F)<<24) +#define SCM_PACRH_PACR58(x) (((x)&0x0F)<<20) + +/* PACRn Assignments */ +#define PACR0(x) SCM_PACRA_PACR0(x) +#define PACR1(x) SCM_PACRA_PACR1(x) +#define PACR2(x) SCM_PACRA_PACR2(x) +#define PACR8(x) SCM_PACRB_PACR8(x) +#define PACR12(x) SCM_PACRB_PACR12(x) +#define PACR16(x) SCM_PACRC_PACR16(x) +#define PACR17(x) SCM_PACRC_PACR17(x) +#define PACR18(x) SCM_PACRC_PACR18(x) +#define PACR19(x) SCM_PACRC_PACR19(x) +#define PACR21(x) SCM_PACRC_PACR21(x) +#define PACR22(x) SCM_PACRC_PACR22(x) +#define PACR23(x) SCM_PACRC_PACR23(x) +#define PACR24(x) SCM_PACRD_PACR24(x) +#define PACR25(x) SCM_PACRD_PACR25(x) +#define PACR26(x) SCM_PACRD_PACR26(x) +#define PACR28(x) SCM_PACRD_PACR28(x) +#define PACR29(x) SCM_PACRD_PACR29(x) +#define PACR30(x) SCM_PACRD_PACR30(x) +#define PACR31(x) SCM_PACRD_PACR31(x) +#define PACR32(x) SCM_PACRE_PACR32(x) +#define PACR33(x) SCM_PACRE_PACR33(x) +#define PACR34(x) SCM_PACRE_PACR34(x) +#define PACR35(x) SCM_PACRE_PACR35(x) +#define PACR36(x) SCM_PACRE_PACR36(x) +#define PACR37(x) SCM_PACRE_PACR37(x) +#define PACR38(x) SCM_PACRE_PACR38(x) +#define PACR40(x) SCM_PACRF_PACR40(x) +#define PACR41(x) SCM_PACRF_PACR41(x) +#define PACR42(x) SCM_PACRF_PACR42(x) +#define PACR43(x) SCM_PACRF_PACR43(x) +#define PACR44(x) SCM_PACRF_PACR44(x) +#define PACR45(x) SCM_PACRF_PACR45(x) +#define PACR46(x) SCM_PACRF_PACR46(x) +#define PACR47(x) SCM_PACRF_PACR47(x) +#define PACR48(x) SCM_PACRG_PACR48(x) +#define PACR56(x) SCM_PACRH_PACR56(x) +#define PACR57(x) SCM_PACRH_PACR57(x) +#define PACR58(x) SCM_PACRH_PACR58(x) + +/* Bit definitions and macros for SCM_CWCR */ +#define CWCR_RO (0x8000) +#define CWCR_CWR_WH (0x0100) +#define CWCR_CWE (0x0080) +#define CWRI_WINDOW (0x0060) +#define CWRI_RESET (0x0040) +#define CWRI_INT_RESET (0x0020) +#define CWRI_INT (0x0000) +#define CWCR_CWT(x) (((x)&0x001F)) + +/* Bit definitions and macros for SCM_ISR */ +#define SCMISR_CFEI (0x02) +#define SCMISR_CWIC (0x01) + +/* Bit definitions and macros for SCM_BCR */ +#define BCR_GBR (0x00000200) +#define BCR_GBW (0x00000100) +#define BCR_S7 (0x00000080) +#define BCR_S6 (0x00000040) +#define BCR_S4 (0x00000010) +#define BCR_S1 (0x00000002) + +/* Bit definitions and macros for SCM_CFIER */ +#define CFIER_ECFEI (0x01) + +/* Bit definitions and macros for SCM_CFLOC */ +#define CFLOC_LOC (0x80) + +/* Bit definitions and macros for SCM_CFATR */ +#define CFATR_WRITE (0x80) +#define CFATR_SZ32 (0x20) +#define CFATR_SZ16 (0x10) +#define CFATR_SZ08 (0x00) +#define CFATR_CACHE (0x08) +#define CFATR_MODE (0x02) +#define CFATR_TYPE (0x01) + +/********************************************************************* +* +* Random Number Generator (RNG) +* +*********************************************************************/ +/* Bit definitions and macros for RNG_RNGCR */ +#define RNGCR_CI (0x00000008) +#define RNGCR_IM (0x00000004) +#define RNGCR_HA (0x00000002) +#define RNGCR_GO (0x00000001) + +/* Bit definitions and macros for RNG_RNGSR */ +#define RNGSR_OFS(x) (((x)&0xFF)<<16) +#define RNGSR_OFL(x) (((x)&0xFF)<<8) +#define RNGSR_EI (0x00000008) +#define RNGSR_FUF (0x00000004) +#define RNGSR_LRS (0x00000002) +#define RNGSR_SV (0x00000001) + +/********************************************************************* +* FlexBus Chip Selects (FBCS) +*********************************************************************/ +/* Bit definitions and macros for FBCS_CSAR */ +#define CSAR_BA(x) (((x)&0xFFFF)<<16) + +/* Bit definitions and macros for FBCS_CSMR */ +#define CSMR_BAM(x) (((x)&0xFFFF)<<16) +#define CSMR_BAM_4G (0xFFFF0000) +#define CSMR_BAM_2G (0x7FFF0000) +#define CSMR_BAM_1G (0x3FFF0000) +#define CSMR_BAM_1024M (0x3FFF0000) +#define CSMR_BAM_512M (0x1FFF0000) +#define CSMR_BAM_256M (0x0FFF0000) +#define CSMR_BAM_128M (0x07FF0000) +#define CSMR_BAM_64M (0x03FF0000) +#define CSMR_BAM_32M (0x01FF0000) +#define CSMR_BAM_16M (0x00FF0000) +#define CSMR_BAM_8M (0x007F0000) +#define CSMR_BAM_4M (0x003F0000) +#define CSMR_BAM_2M (0x001F0000) +#define CSMR_BAM_1M (0x000F0000) +#define CSMR_BAM_1024K (0x000F0000) +#define CSMR_BAM_512K (0x00070000) +#define CSMR_BAM_256K (0x00030000) +#define CSMR_BAM_128K (0x00010000) +#define CSMR_BAM_64K (0x00000000) +#define CSMR_WP (0x00000100) +#define CSMR_V (0x00000001) + +/* Bit definitions and macros for FBCS_CSCR */ +#define CSCR_SWS(x) (((x)&0x3F)<<26) +#define CSCR_ASET(x) (((x)&0x03)<<20) +#define CSCR_SWSEN (0x00800000) +#define CSCR_ASET_4CLK (0x00300000) +#define CSCR_ASET_3CLK (0x00200000) +#define CSCR_ASET_2CLK (0x00100000) +#define CSCR_ASET_1CLK (0x00000000) +#define CSCR_RDAH(x) (((x)&0x03)<<18) +#define CSCR_RDAH_4CYC (0x000C0000) +#define CSCR_RDAH_3CYC (0x00080000) +#define CSCR_RDAH_2CYC (0x00040000) +#define CSCR_RDAH_1CYC (0x00000000) +#define CSCR_WRAH(x) (((x)&0x03)<<16) +#define CSCR_WDAH_4CYC (0x00003000) +#define CSCR_WDAH_3CYC (0x00002000) +#define CSCR_WDAH_2CYC (0x00001000) +#define CSCR_WDAH_1CYC (0x00000000) +#define CSCR_WS(x) (((x)&0x3F)<<10) +#define CSCR_SBM (0x00000200) +#define CSCR_AA (0x00000100) +#define CSCR_PS_MASK (0x000000C0) +#define CSCR_PS_32 (0x00000000) +#define CSCR_PS_16 (0x00000080) +#define CSCR_PS_8 (0x00000040) +#define CSCR_BEM (0x00000020) +#define CSCR_BSTR (0x00000010) +#define CSCR_BSTW (0x00000008) + +/********************************************************************* +* FlexCAN Module (CAN) +*********************************************************************/ +/* Bit definitions and macros for CAN_CANMCR */ +#define CANMCR_MDIS (0x80000000) +#define CANMCR_FRZ (0x40000000) +#define CANMCR_HALT (0x10000000) +#define CANMCR_NORDY (0x08000000) +#define CANMCR_SOFTRST (0x02000000) +#define CANMCR_FRZACK (0x01000000) +#define CANMCR_SUPV (0x00800000) +#define CANMCR_LPMACK (0x00100000) +#define CANMCR_MAXMB(x) (((x)&0x0F)) + +/* Bit definitions and macros for CAN_CANCTRL */ +#define CANCTRL_PRESDIV(x) (((x)&0xFF)<<24) +#define CANCTRL_RJW(x) (((x)&0x03)<<22) +#define CANCTRL_PSEG1(x) (((x)&0x07)<<19) +#define CANCTRL_PSEG2(x) (((x)&0x07)<<16) +#define CANCTRL_BOFFMSK (0x00008000) +#define CANCTRL_ERRMSK (0x00004000) +#define CANCTRL_CLKSRC (0x00002000) +#define CANCTRL_LPB (0x00001000) +#define CANCTRL_SMP (0x00000080) +#define CANCTRL_BOFFREC (0x00000040) +#define CANCTRL_TSYNC (0x00000020) +#define CANCTRL_LBUF (0x00000010) +#define CANCTRL_LOM (0x00000008) +#define CANCTRL_PROPSEG(x) (((x)&0x07)) + +/* Bit definitions and macros for CAN_TIMER */ +#define TIMER_TIMER(x) ((x)&0xFFFF) + +/* Bit definitions and macros for CAN_RXGMASK */ +#define RXGMASK_MI(x) ((x)&0x1FFFFFFF) + +/* Bit definitions and macros for CAN_ERRCNT */ +#define ERRCNT_TXECTR(x) (((x)&0xFF)) +#define ERRCNT_RXECTR(x) (((x)&0xFF)<<8) + +/* Bit definitions and macros for CAN_ERRSTAT */ +#define ERRSTAT_BITERR1 (0x00008000) +#define ERRSTAT_BITERR0 (0x00004000) +#define ERRSTAT_ACKERR (0x00002000) +#define ERRSTAT_CRCERR (0x00001000) +#define ERRSTAT_FRMERR (0x00000800) +#define ERRSTAT_STFERR (0x00000400) +#define ERRSTAT_TXWRN (0x00000200) +#define ERRSTAT_RXWRN (0x00000100) +#define ERRSTAT_IDLE (0x00000080) +#define ERRSTAT_TXRX (0x00000040) +#define ERRSTAT_FLT_BUSOFF (0x00000020) +#define ERRSTAT_FLT_PASSIVE (0x00000010) +#define ERRSTAT_FLT_ACTIVE (0x00000000) +#define ERRSTAT_BOFFINT (0x00000004) +#define ERRSTAT_ERRINT (0x00000002) +#define ERRSTAT_WAKINT (0x00000001) + +/* Bit definitions and macros for CAN_IMASK */ +#define IMASK_BUF15M (0x00008000) +#define IMASK_BUF14M (0x00004000) +#define IMASK_BUF13M (0x00002000) +#define IMASK_BUF12M (0x00001000) +#define IMASK_BUF11M (0x00000800) +#define IMASK_BUF10M (0x00000400) +#define IMASK_BUF9M (0x00000200) +#define IMASK_BUF8M (0x00000100) +#define IMASK_BUF7M (0x00000080) +#define IMASK_BUF6M (0x00000040) +#define IMASK_BUF5M (0x00000020) +#define IMASK_BUF4M (0x00000010) +#define IMASK_BUF3M (0x00000008) +#define IMASK_BUF2M (0x00000004) +#define IMASK_BUF1M (0x00000002) +#define IMASK_BUF0M (0x00000001) + +/* Bit definitions and macros for CAN_IFLAG */ +#define IFLAG_BUF15I (0x00008000) +#define IFLAG_BUF14I (0x00004000) +#define IFLAG_BUF13I (0x00002000) +#define IFLAG_BUF12I (0x00001000) +#define IFLAG_BUF11I (0x00000800) +#define IFLAG_BUF10I (0x00000400) +#define IFLAG_BUF9I (0x00000200) +#define IFLAG_BUF8I (0x00000100) +#define IFLAG_BUF7I (0x00000080) +#define IFLAG_BUF6I (0x00000040) +#define IFLAG_BUF5I (0x00000020) +#define IFLAG_BUF4I (0x00000010) +#define IFLAG_BUF3I (0x00000008) +#define IFLAG_BUF2I (0x00000004) +#define IFLAG_BUF1I (0x00000002) +#define IFLAG_BUF0I (0x00000001) + +/********************************************************************* +* Interrupt Controller (INTC) +*********************************************************************/ +#define INTC0_EPORT INTC_IPRL_INT1 + +#define INT0_LO_RSVD0 (0) +#define INT0_LO_EPORT1 (1) +#define INT0_LO_EPORT2 (2) +#define INT0_LO_EPORT3 (3) +#define INT0_LO_EPORT4 (4) +#define INT0_LO_EPORT5 (5) +#define INT0_LO_EPORT6 (6) +#define INT0_LO_EPORT7 (7) +#define INT0_LO_EDMA_00 (8) +#define INT0_LO_EDMA_01 (9) +#define INT0_LO_EDMA_02 (10) +#define INT0_LO_EDMA_03 (11) +#define INT0_LO_EDMA_04 (12) +#define INT0_LO_EDMA_05 (13) +#define INT0_LO_EDMA_06 (14) +#define INT0_LO_EDMA_07 (15) +#define INT0_LO_EDMA_08 (16) +#define INT0_LO_EDMA_09 (17) +#define INT0_LO_EDMA_10 (18) +#define INT0_LO_EDMA_11 (19) +#define INT0_LO_EDMA_12 (20) +#define INT0_LO_EDMA_13 (21) +#define INT0_LO_EDMA_14 (22) +#define INT0_LO_EDMA_15 (23) +#define INT0_LO_EDMA_ERR (24) +#define INT0_LO_SCM (25) +#define INT0_LO_UART0 (26) +#define INT0_LO_UART1 (27) +#define INT0_LO_UART2 (28) +#define INT0_LO_RSVD1 (29) +#define INT0_LO_I2C (30) +#define INT0_LO_QSPI (31) +#define INT0_HI_DTMR0 (32) +#define INT0_HI_DTMR1 (33) +#define INT0_HI_DTMR2 (34) +#define INT0_HI_DTMR3 (35) +#define INT0_HI_FEC_TXF (36) +#define INT0_HI_FEC_TXB (37) +#define INT0_HI_FEC_UN (38) +#define INT0_HI_FEC_RL (39) +#define INT0_HI_FEC_RXF (40) +#define INT0_HI_FEC_RXB (41) +#define INT0_HI_FEC_MII (42) +#define INT0_HI_FEC_LC (43) +#define INT0_HI_FEC_HBERR (44) +#define INT0_HI_FEC_GRA (45) +#define INT0_HI_FEC_EBERR (46) +#define INT0_HI_FEC_BABT (47) +#define INT0_HI_FEC_BABR (48) +/* 49 - 61 Reserved */ +#define INT0_HI_SCM (62) + +/*#define INT1_HI_ */ + +/* Bit definitions and macros for INTC_IPRH */ +#define INTC_IPRH_INT63 (0x80000000) +#define INTC_IPRH_INT62 (0x40000000) +#define INTC_IPRH_INT61 (0x20000000) +#define INTC_IPRH_INT60 (0x10000000) +#define INTC_IPRH_INT59 (0x08000000) +#define INTC_IPRH_INT58 (0x04000000) +#define INTC_IPRH_INT57 (0x02000000) +#define INTC_IPRH_INT56 (0x01000000) +#define INTC_IPRH_INT55 (0x00800000) +#define INTC_IPRH_INT54 (0x00400000) +#define INTC_IPRH_INT53 (0x00200000) +#define INTC_IPRH_INT52 (0x00100000) +#define INTC_IPRH_INT51 (0x00080000) +#define INTC_IPRH_INT50 (0x00040000) +#define INTC_IPRH_INT49 (0x00020000) +#define INTC_IPRH_INT48 (0x00010000) +#define INTC_IPRH_INT47 (0x00008000) +#define INTC_IPRH_INT46 (0x00004000) +#define INTC_IPRH_INT45 (0x00002000) +#define INTC_IPRH_INT44 (0x00001000) +#define INTC_IPRH_INT43 (0x00000800) +#define INTC_IPRH_INT42 (0x00000400) +#define INTC_IPRH_INT41 (0x00000200) +#define INTC_IPRH_INT40 (0x00000100) +#define INTC_IPRH_INT39 (0x00000080) +#define INTC_IPRH_INT38 (0x00000040) +#define INTC_IPRH_INT37 (0x00000020) +#define INTC_IPRH_INT36 (0x00000010) +#define INTC_IPRH_INT35 (0x00000008) +#define INTC_IPRH_INT34 (0x00000004) +#define INTC_IPRH_INT33 (0x00000002) +#define INTC_IPRH_INT32 (0x00000001) + +/* Bit definitions and macros for INTC_IPRL */ +#define INTC_IPRL_INT31 (0x80000000) +#define INTC_IPRL_INT30 (0x40000000) +#define INTC_IPRL_INT29 (0x20000000) +#define INTC_IPRL_INT28 (0x10000000) +#define INTC_IPRL_INT27 (0x08000000) +#define INTC_IPRL_INT26 (0x04000000) +#define INTC_IPRL_INT25 (0x02000000) +#define INTC_IPRL_INT24 (0x01000000) +#define INTC_IPRL_INT23 (0x00800000) +#define INTC_IPRL_INT22 (0x00400000) +#define INTC_IPRL_INT21 (0x00200000) +#define INTC_IPRL_INT20 (0x00100000) +#define INTC_IPRL_INT19 (0x00080000) +#define INTC_IPRL_INT18 (0x00040000) +#define INTC_IPRL_INT17 (0x00020000) +#define INTC_IPRL_INT16 (0x00010000) +#define INTC_IPRL_INT15 (0x00008000) +#define INTC_IPRL_INT14 (0x00004000) +#define INTC_IPRL_INT13 (0x00002000) +#define INTC_IPRL_INT12 (0x00001000) +#define INTC_IPRL_INT11 (0x00000800) +#define INTC_IPRL_INT10 (0x00000400) +#define INTC_IPRL_INT9 (0x00000200) +#define INTC_IPRL_INT8 (0x00000100) +#define INTC_IPRL_INT7 (0x00000080) +#define INTC_IPRL_INT6 (0x00000040) +#define INTC_IPRL_INT5 (0x00000020) +#define INTC_IPRL_INT4 (0x00000010) +#define INTC_IPRL_INT3 (0x00000008) +#define INTC_IPRL_INT2 (0x00000004) +#define INTC_IPRL_INT1 (0x00000002) +#define INTC_IPRL_INT0 (0x00000001) + +/* Bit definitions and macros for INTC_ICONFIG */ +#define INTC_ICFG_ELVLPRI7 (0x8000) +#define INTC_ICFG_ELVLPRI6 (0x4000) +#define INTC_ICFG_ELVLPRI5 (0x2000) +#define INTC_ICFG_ELVLPRI4 (0x1000) +#define INTC_ICFG_ELVLPRI3 (0x0800) +#define INTC_ICFG_ELVLPRI2 (0x0400) +#define INTC_ICFG_ELVLPRI1 (0x0200) +#define INTC_ICFG_EMASK (0x0020) + +/* Bit definitions and macros for INTC_SIMR */ +#define INTC_SIMR_SALL (0x40) +#define INTC_SIMR_SIMR(x) ((x)&0x3F) + +/* Bit definitions and macros for INTC_CIMR */ +#define INTC_CIMR_CALL (0x40) +#define INTC_CIMR_CIMR(x) ((x)&0x3F) + +/* Bit definitions and macros for INTC_CLMASK */ +#define INTC_CLMASK_CLMASK(x) ((x)&0x0F) + +/* Bit definitions and macros for INTC_SLMASK */ +#define INTC_SLMASK_SLMASK(x) ((x)&0x0F) + +/* Bit definitions and macros for INTC_ICR */ +#define INTC_ICR_IL(x) ((x)&0x07) + +/********************************************************************* +* I2C Module (I2C) +*********************************************************************/ +/* Bit definitions and macros for I2C_AR */ +#define I2C_AR_ADR(x) (((x)&0x7F)<<1) + +/* Bit definitions and macros for I2C_FDR */ +#define I2C_FDR_IC(x) ((x)&0x3F) + +/* Bit definitions and macros for I2C_CR */ +#define I2C_CR_IEN (0x80) +#define I2C_CR_IIEN (0x40) +#define I2C_CR_MSTA (0x20) +#define I2C_CR_MTX (0x10) +#define I2C_CR_TXAK (0x08) +#define I2C_CR_RSTA (0x04) + +/* Bit definitions and macros for I2C_SR */ +#define I2C_SR_ICF (0x80) +#define I2C_SR_IAAS (0x40) +#define I2C_SR_IBB (0x20) +#define I2C_SR_IAL (0x10) +#define I2C_SR_SRW (0x04) +#define I2C_SR_IIF (0x02) +#define I2C_SR_RXAK (0x01) + +/* Bit definitions and macros for I2C_ICR */ +#define I2C_ICR_BNBE (0x08) +#define I2C_ICR_TE (0x04) +#define I2C_ICR_RE (0x02) +#define I2C_ICR_IE (0x01) + +/********************************************************************* +* Queued Serial Peripheral Interface (QSPI) +*********************************************************************/ +/* Bit definitions and macros for QSPI_QMR */ +#define QSPI_QMR_MSTR (0x8000) +#define QSPI_QMR_DOHIE (0x4000) +#define QSPI_QMR_BITS(x) (((x)&0x000F)<<10) +#define QSPI_QMR_CPOL (0x0200) +#define QSPI_QMR_CPHA (0x0100) +#define QSPI_QMR_BAUD(x) ((x)&0x00FF) + +/* Bit definitions and macros for QSPI_QDLYR */ +#define QSPI_QDLYR_SPE (0x8000) +#define QSPI_QDLYR_QCD(x) (((x)&0x007F)<<8) +#define QSPI_QDLYR_DTL(x) ((x)&0x00FF) + +/* Bit definitions and macros for QSPI_QWR */ +#define QSPI_QWR_NEWQP(x) ((x)&0x000F) +#define QSPI_QWR_ENDQP(x) (((x)&0x000F)<<8) +#define QSPI_QWR_CSIV (0x1000) +#define QSPI_QWR_WRTO (0x2000) +#define QSPI_QWR_WREN (0x4000) +#define QSPI_QWR_HALT (0x8000) + +/* Bit definitions and macros for QSPI_QIR */ +#define QSPI_QIR_WCEFB (0x8000) +#define QSPI_QIR_ABRTB (0x4000) +#define QSPI_QIR_ABRTL (0x1000) +#define QSPI_QIR_WCEFE (0x0800) +#define QSPI_QIR_ABRTE (0x0400) +#define QSPI_QIR_SPIFE (0x0100) +#define QSPI_QIR_WCEF (0x0008) +#define QSPI_QIR_ABRT (0x0004) +#define QSPI_QIR_SPIF (0x0001) + +/* Bit definitions and macros for QSPI_QAR */ +#define QSPI_QAR_ADDR(x) ((x)&0x003F) +#define QSPI_QAR_TRANS (0x0000) +#define QSPI_QAR_RECV (0x0010) +#define QSPI_QAR_CMD (0x0020) + +/* Bit definitions and macros for QSPI_QDR */ +#define QSPI_QDR_CONT (0x8000) +#define QSPI_QDR_BITSE (0x4000) +#define QSPI_QDR_DT (0x2000) +#define QSPI_QDR_DSCK (0x1000) +#define QSPI_QDR_QSPI_CS3 (0x0800) +#define QSPI_QDR_QSPI_CS2 (0x0400) +#define QSPI_QDR_QSPI_CS1 (0x0200) +#define QSPI_QDR_QSPI_CS0 (0x0100) + +/********************************************************************* +* Pulse Width Modulation (PWM) +*********************************************************************/ +/* Bit definitions and macros for PWM_E */ +#define PWM_EN_PWME7 (0x80) +#define PWM_EN_PWME5 (0x20) +#define PWM_EN_PWME3 (0x08) +#define PWM_EN_PWME1 (0x02) + +/* Bit definitions and macros for PWM_POL */ +#define PWM_POL_PPOL7 (0x80) +#define PWM_POL_PPOL5 (0x20) +#define PWM_POL_PPOL3 (0x08) +#define PWM_POL_PPOL1 (0x02) + +/* Bit definitions and macros for PWM_CLK */ +#define PWM_CLK_PCLK7 (0x80) +#define PWM_CLK_PCLK5 (0x20) +#define PWM_CLK_PCLK3 (0x08) +#define PWM_CLK_PCLK1 (0x02) + +/* Bit definitions and macros for PWM_PRCLK */ +#define PWM_PRCLK_PCKB(x) (((x)&0x07)<<4) +#define PWM_PRCLK_PCKA(x) ((x)&0x07) + +/* Bit definitions and macros for PWM_CAE */ +#define PWM_CAE_CAE7 (0x80) +#define PWM_CAE_CAE5 (0x20) +#define PWM_CAE_CAE3 (0x08) +#define PWM_CAE_CAE1 (0x02) + +/* Bit definitions and macros for PWM_CTL */ +#define PWM_CTL_CON67 (0x80) +#define PWM_CTL_CON45 (0x40) +#define PWM_CTL_CON23 (0x20) +#define PWM_CTL_CON01 (0x10) +#define PWM_CTL_PSWAR (0x08) +#define PWM_CTL_PFRZ (0x04) + +/* Bit definitions and macros for PWM_SDN */ +#define PWM_SDN_IF (0x80) +#define PWM_SDN_IE (0x40) +#define PWM_SDN_RESTART (0x20) +#define PWM_SDN_LVL (0x10) +#define PWM_SDN_PWM7IN (0x04) +#define PWM_SDN_PWM7IL (0x02) +#define PWM_SDN_SDNEN (0x01) + +/********************************************************************* +* Watchdog Timer Modules (WTM) +*********************************************************************/ +/* Bit definitions and macros for WTM_WCR */ +#define WTM_WCR_WAIT (0x0008) +#define WTM_WCR_DOZE (0x0004) +#define WTM_WCR_HALTED (0x0002) +#define WTM_WCR_EN (0x0001) + +/********************************************************************* +* Chip Configuration Module (CCM) +*********************************************************************/ +/* Bit definitions and macros for CCM_CCR */ +#define CCM_CCR_CSC(x) (((x)&0x0003)<<8|0x0001) +#define CCM_CCR_LIMP (0x0041) +#define CCM_CCR_LOAD (0x0021) +#define CCM_CCR_BOOTPS(x) (((x)&0x0003)<<3|0x0001) +#define CCM_CCR_OSC_MODE (0x0005) +#define CCM_CCR_PLL_MODE (0x0003) +#define CCM_CCR_RESERVED (0x0001) + +/* Bit definitions and macros for CCM_RCON */ +#define CCM_RCON_CSC(x) (((x)&0x0003)<<8|0x0001) +#define CCM_RCON_LIMP (0x0041) +#define CCM_RCON_LOAD (0x0021) +#define CCM_RCON_BOOTPS(x) (((x)&0x0003)<<3|0x0001) +#define CCM_RCON_OSC_MODE (0x0005) +#define CCM_RCON_PLL_MODE (0x0003) +#define CCM_RCON_RESERVED (0x0001) + +/* Bit definitions and macros for CCM_CIR */ +#define CCM_CIR_PIN(x) (((x)&0x03FF)<<6) +#define CCM_CIR_PRN(x) ((x)&0x003F) + +/* Bit definitions and macros for CCM_MISCCR */ +#define CCM_MISCCR_PLL_LOCK (0x2000) +#define CCM_MISCCR_LIMP (0x1000) +#define CCM_MISCCR_LCD_CHEN (0x0100) +#define CCM_MISCCR_SSI_PUE (0x0080) +#define CCM_MISCCR_SSI_PUS (0x0040) +#define CCM_MISCCR_TIM_DMA (0x0020) +#define CCM_MISCCR_SSI_SRC (0x0010) +#define CCM_MISCCR_USBDIV (0x0002) +#define CCM_MISCCR_USBSRC (0x0001) + +/* Bit definitions and macros for CCM_CDR */ +#define CCM_CDR_LPDIV(x) (((x)&0x000F)<<8) +#define CCM_CDR_SSIDIV(x) ((x)&0x000F) + +/* Bit definitions and macros for CCM_UHCSR */ +#define CCM_UHCSR_PORTIND(x) (((x)&0x0003)<<14) +#define CCM_UHCSR_WKUP (0x0004) +#define CCM_UHCSR_UHMIE (0x0002) +#define CCM_UHCSR_XPDE (0x0001) + +/* Bit definitions and macros for CCM_UOCSR */ +#define CCM_UOCSR_PORTIND(x) (((x)&0x0003)<<14) +#define CCM_UOCSR_DPPD (0x2000) +#define CCM_UOCSR_DMPD (0x1000) +#define CCM_UOCSR_DRV_VBUS (0x0800) +#define CCM_UOCSR_CRG_VBUS (0x0400) +#define CCM_UOCSR_DCR_VBUS (0x0200) +#define CCM_UOCSR_DPPU (0x0100) +#define CCM_UOCSR_AVLD (0x0080) +#define CCM_UOCSR_BVLD (0x0040) +#define CCM_UOCSR_VVLD (0x0020) +#define CCM_UOCSR_SEND (0x0010) +#define CCM_UOCSR_PWRFLT (0x0008) +#define CCM_UOCSR_WKUP (0x0004) +#define CCM_UOCSR_UOMIE (0x0002) +#define CCM_UOCSR_XPDE (0x0001) + +/* not done yet */ +/********************************************************************* +* General Purpose I/O (GPIO) +*********************************************************************/ +/* Bit definitions and macros for GPIO_PODR_FECH_L */ +#define GPIO_PODR_FECH_L7 (0x80) +#define GPIO_PODR_FECH_L6 (0x40) +#define GPIO_PODR_FECH_L5 (0x20) +#define GPIO_PODR_FECH_L4 (0x10) +#define GPIO_PODR_FECH_L3 (0x08) +#define GPIO_PODR_FECH_L2 (0x04) +#define GPIO_PODR_FECH_L1 (0x02) +#define GPIO_PODR_FECH_L0 (0x01) + +/* Bit definitions and macros for GPIO_PODR_SSI */ +#define GPIO_PODR_SSI_4 (0x10) +#define GPIO_PODR_SSI_3 (0x08) +#define GPIO_PODR_SSI_2 (0x04) +#define GPIO_PODR_SSI_1 (0x02) +#define GPIO_PODR_SSI_0 (0x01) + +/* Bit definitions and macros for GPIO_PODR_BUSCTL */ +#define GPIO_PODR_BUSCTL_3 (0x08) +#define GPIO_PODR_BUSCTL_2 (0x04) +#define GPIO_PODR_BUSCTL_1 (0x02) +#define GPIO_PODR_BUSCTL_0 (0x01) + +/* Bit definitions and macros for GPIO_PODR_BE */ +#define GPIO_PODR_BE_3 (0x08) +#define GPIO_PODR_BE_2 (0x04) +#define GPIO_PODR_BE_1 (0x02) +#define GPIO_PODR_BE_0 (0x01) + +/* Bit definitions and macros for GPIO_PODR_CS */ +#define GPIO_PODR_CS_5 (0x20) +#define GPIO_PODR_CS_4 (0x10) +#define GPIO_PODR_CS_3 (0x08) +#define GPIO_PODR_CS_2 (0x04) +#define GPIO_PODR_CS_1 (0x02) + +/* Bit definitions and macros for GPIO_PODR_PWM */ +#define GPIO_PODR_PWM_5 (0x20) +#define GPIO_PODR_PWM_4 (0x10) +#define GPIO_PODR_PWM_3 (0x08) +#define GPIO_PODR_PWM_2 (0x04) + +/* Bit definitions and macros for GPIO_PODR_FECI2C */ +#define GPIO_PODR_FECI2C_3 (0x08) +#define GPIO_PODR_FECI2C_2 (0x04) +#define GPIO_PODR_FECI2C_1 (0x02) +#define GPIO_PODR_FECI2C_0 (0x01) + +/* Bit definitions and macros for GPIO_PODR_UART */ +#define GPIO_PODR_UART_7 (0x80) +#define GPIO_PODR_UART_6 (0x40) +#define GPIO_PODR_UART_5 (0x20) +#define GPIO_PODR_UART_4 (0x10) +#define GPIO_PODR_UART_3 (0x08) +#define GPIO_PODR_UART_2 (0x04) +#define GPIO_PODR_UART_1 (0x02) +#define GPIO_PODR_UART_0 (0x01) + +/* Bit definitions and macros for GPIO_PODR_QSPI */ +#define GPIO_PODR_QSPI_5 (0x20) +#define GPIO_PODR_QSPI_4 (0x10) +#define GPIO_PODR_QSPI_3 (0x08) +#define GPIO_PODR_QSPI_2 (0x04) +#define GPIO_PODR_QSPI_1 (0x02) +#define GPIO_PODR_QSPI_0 (0x01) + +/* Bit definitions and macros for GPIO_PODR_TIMER */ +#define GPIO_PODR_TIMER_3 (0x08) +#define GPIO_PODR_TIMER_2 (0x04) +#define GPIO_PODR_TIMER_1 (0x02) +#define GPIO_PODR_TIMER_0 (0x01) + +/* Bit definitions and macros for GPIO_PODR_LCDDATAH */ +#define GPIO_PODR_LCDDATAH_1 (0x02) +#define GPIO_PODR_LCDDATAH_0 (0x01) + +/* Bit definitions and macros for GPIO_PODR_LCDDATAM */ +#define GPIO_PODR_LCDDATAM_7 (0x80) +#define GPIO_PODR_LCDDATAM_6 (0x40) +#define GPIO_PODR_LCDDATAM_5 (0x20) +#define GPIO_PODR_LCDDATAM_4 (0x10) +#define GPIO_PODR_LCDDATAM_3 (0x08) +#define GPIO_PODR_LCDDATAM_2 (0x04) +#define GPIO_PODR_LCDDATAM_1 (0x02) +#define GPIO_PODR_LCDDATAM_0 (0x01) + +/* Bit definitions and macros for GPIO_PODR_LCDDATAL */ +#define GPIO_PODR_LCDDATAL_7 (0x80) +#define GPIO_PODR_LCDDATAL_6 (0x40) +#define GPIO_PODR_LCDDATAL_5 (0x20) +#define GPIO_PODR_LCDDATAL_4 (0x10) +#define GPIO_PODR_LCDDATAL_3 (0x08) +#define GPIO_PODR_LCDDATAL_2 (0x04) +#define GPIO_PODR_LCDDATAL_1 (0x02) +#define GPIO_PODR_LCDDATAL_0 (0x01) + +/* Bit definitions and macros for GPIO_PODR_LCDCTLH */ +#define GPIO_PODR_LCDCTLH_0 (0x01) + +/* Bit definitions and macros for GPIO_PODR_LCDCTLL */ +#define GPIO_PODR_LCDCTLL_7 (0x80) +#define GPIO_PODR_LCDCTLL_6 (0x40) +#define GPIO_PODR_LCDCTLL_5 (0x20) +#define GPIO_PODR_LCDCTLL_4 (0x10) +#define GPIO_PODR_LCDCTLL_3 (0x08) +#define GPIO_PODR_LCDCTLL_2 (0x04) +#define GPIO_PODR_LCDCTLL_1 (0x02) +#define GPIO_PODR_LCDCTLL_0 (0x01) + +/* Bit definitions and macros for GPIO_PDDR_FECH */ +#define GPIO_PDDR_FECH_L7 (0x80) +#define GPIO_PDDR_FECH_L6 (0x40) +#define GPIO_PDDR_FECH_L5 (0x20) +#define GPIO_PDDR_FECH_L4 (0x10) +#define GPIO_PDDR_FECH_L3 (0x08) +#define GPIO_PDDR_FECH_L2 (0x04) +#define GPIO_PDDR_FECH_L1 (0x02) +#define GPIO_PDDR_FECH_L0 (0x01) + +/* Bit definitions and macros for GPIO_PDDR_SSI */ +#define GPIO_PDDR_SSI_4 (0x10) +#define GPIO_PDDR_SSI_3 (0x08) +#define GPIO_PDDR_SSI_2 (0x04) +#define GPIO_PDDR_SSI_1 (0x02) +#define GPIO_PDDR_SSI_0 (0x01) + +/* Bit definitions and macros for GPIO_PDDR_BUSCTL */ +#define GPIO_PDDR_BUSCTL_3 (0x08) +#define GPIO_PDDR_BUSCTL_2 (0x04) +#define GPIO_PDDR_BUSCTL_1 (0x02) +#define GPIO_PDDR_BUSCTL_0 (0x01) + +/* Bit definitions and macros for GPIO_PDDR_BE */ +#define GPIO_PDDR_BE_3 (0x08) +#define GPIO_PDDR_BE_2 (0x04) +#define GPIO_PDDR_BE_1 (0x02) +#define GPIO_PDDR_BE_0 (0x01) + +/* Bit definitions and macros for GPIO_PDDR_CS */ +#define GPIO_PDDR_CS_1 (0x02) +#define GPIO_PDDR_CS_2 (0x04) +#define GPIO_PDDR_CS_3 (0x08) +#define GPIO_PDDR_CS_4 (0x10) +#define GPIO_PDDR_CS_5 (0x20) + +/* Bit definitions and macros for GPIO_PDDR_PWM */ +#define GPIO_PDDR_PWM_2 (0x04) +#define GPIO_PDDR_PWM_3 (0x08) +#define GPIO_PDDR_PWM_4 (0x10) +#define GPIO_PDDR_PWM_5 (0x20) + +/* Bit definitions and macros for GPIO_PDDR_FECI2C */ +#define GPIO_PDDR_FECI2C_0 (0x01) +#define GPIO_PDDR_FECI2C_1 (0x02) +#define GPIO_PDDR_FECI2C_2 (0x04) +#define GPIO_PDDR_FECI2C_3 (0x08) + +/* Bit definitions and macros for GPIO_PDDR_UART */ +#define GPIO_PDDR_UART_0 (0x01) +#define GPIO_PDDR_UART_1 (0x02) +#define GPIO_PDDR_UART_2 (0x04) +#define GPIO_PDDR_UART_3 (0x08) +#define GPIO_PDDR_UART_4 (0x10) +#define GPIO_PDDR_UART_5 (0x20) +#define GPIO_PDDR_UART_6 (0x40) +#define GPIO_PDDR_UART_7 (0x80) + +/* Bit definitions and macros for GPIO_PDDR_QSPI */ +#define GPIO_PDDR_QSPI_0 (0x01) +#define GPIO_PDDR_QSPI_1 (0x02) +#define GPIO_PDDR_QSPI_2 (0x04) +#define GPIO_PDDR_QSPI_3 (0x08) +#define GPIO_PDDR_QSPI_4 (0x10) +#define GPIO_PDDR_QSPI_5 (0x20) + +/* Bit definitions and macros for GPIO_PDDR_TIMER */ +#define GPIO_PDDR_TIMER_0 (0x01) +#define GPIO_PDDR_TIMER_1 (0x02) +#define GPIO_PDDR_TIMER_2 (0x04) +#define GPIO_PDDR_TIMER_3 (0x08) + +/* Bit definitions and macros for GPIO_PDDR_LCDDATAH */ +#define GPIO_PDDR_LCDDATAH_0 (0x01) +#define GPIO_PDDR_LCDDATAH_1 (0x02) + +/* Bit definitions and macros for GPIO_PDDR_LCDDATAM */ +#define GPIO_PDDR_LCDDATAM_0 (0x01) +#define GPIO_PDDR_LCDDATAM_1 (0x02) +#define GPIO_PDDR_LCDDATAM_2 (0x04) +#define GPIO_PDDR_LCDDATAM_3 (0x08) +#define GPIO_PDDR_LCDDATAM_4 (0x10) +#define GPIO_PDDR_LCDDATAM_5 (0x20) +#define GPIO_PDDR_LCDDATAM_6 (0x40) +#define GPIO_PDDR_LCDDATAM_7 (0x80) + +/* Bit definitions and macros for GPIO_PDDR_LCDDATAL */ +#define GPIO_PDDR_LCDDATAL_0 (0x01) +#define GPIO_PDDR_LCDDATAL_1 (0x02) +#define GPIO_PDDR_LCDDATAL_2 (0x04) +#define GPIO_PDDR_LCDDATAL_3 (0x08) +#define GPIO_PDDR_LCDDATAL_4 (0x10) +#define GPIO_PDDR_LCDDATAL_5 (0x20) +#define GPIO_PDDR_LCDDATAL_6 (0x40) +#define GPIO_PDDR_LCDDATAL_7 (0x80) + +/* Bit definitions and macros for GPIO_PDDR_LCDCTLH */ +#define GPIO_PDDR_LCDCTLH_0 (0x01) + +/* Bit definitions and macros for GPIO_PDDR_LCDCTLL */ +#define GPIO_PDDR_LCDCTLL_0 (0x01) +#define GPIO_PDDR_LCDCTLL_1 (0x02) +#define GPIO_PDDR_LCDCTLL_2 (0x04) +#define GPIO_PDDR_LCDCTLL_3 (0x08) +#define GPIO_PDDR_LCDCTLL_4 (0x10) +#define GPIO_PDDR_LCDCTLL_5 (0x20) +#define GPIO_PDDR_LCDCTLL_6 (0x40) +#define GPIO_PDDR_LCDCTLL_7 (0x80) + +/* Bit definitions and macros for GPIO_PPDSDR_FECH */ +#define GPIO_PPDSDR_FECH_L0 (0x01) +#define GPIO_PPDSDR_FECH_L1 (0x02) +#define GPIO_PPDSDR_FECH_L2 (0x04) +#define GPIO_PPDSDR_FECH_L3 (0x08) +#define GPIO_PPDSDR_FECH_L4 (0x10) +#define GPIO_PPDSDR_FECH_L5 (0x20) +#define GPIO_PPDSDR_FECH_L6 (0x40) +#define GPIO_PPDSDR_FECH_L7 (0x80) + +/* Bit definitions and macros for GPIO_PPDSDR_SSI */ +#define GPIO_PPDSDR_SSI_0 (0x01) +#define GPIO_PPDSDR_SSI_1 (0x02) +#define GPIO_PPDSDR_SSI_2 (0x04) +#define GPIO_PPDSDR_SSI_3 (0x08) +#define GPIO_PPDSDR_SSI_4 (0x10) + +/* Bit definitions and macros for GPIO_PPDSDR_BUSCTL */ +#define GPIO_PPDSDR_BUSCTL_0 (0x01) +#define GPIO_PPDSDR_BUSCTL_1 (0x02) +#define GPIO_PPDSDR_BUSCTL_2 (0x04) +#define GPIO_PPDSDR_BUSCTL_3 (0x08) + +/* Bit definitions and macros for GPIO_PPDSDR_BE */ +#define GPIO_PPDSDR_BE_0 (0x01) +#define GPIO_PPDSDR_BE_1 (0x02) +#define GPIO_PPDSDR_BE_2 (0x04) +#define GPIO_PPDSDR_BE_3 (0x08) + +/* Bit definitions and macros for GPIO_PPDSDR_CS */ +#define GPIO_PPDSDR_CS_1 (0x02) +#define GPIO_PPDSDR_CS_2 (0x04) +#define GPIO_PPDSDR_CS_3 (0x08) +#define GPIO_PPDSDR_CS_4 (0x10) +#define GPIO_PPDSDR_CS_5 (0x20) + +/* Bit definitions and macros for GPIO_PPDSDR_PWM */ +#define GPIO_PPDSDR_PWM_2 (0x04) +#define GPIO_PPDSDR_PWM_3 (0x08) +#define GPIO_PPDSDR_PWM_4 (0x10) +#define GPIO_PPDSDR_PWM_5 (0x20) + +/* Bit definitions and macros for GPIO_PPDSDR_FECI2C */ +#define GPIO_PPDSDR_FECI2C_0 (0x01) +#define GPIO_PPDSDR_FECI2C_1 (0x02) +#define GPIO_PPDSDR_FECI2C_2 (0x04) +#define GPIO_PPDSDR_FECI2C_3 (0x08) + +/* Bit definitions and macros for GPIO_PPDSDR_UART */ +#define GPIO_PPDSDR_UART_0 (0x01) +#define GPIO_PPDSDR_UART_1 (0x02) +#define GPIO_PPDSDR_UART_2 (0x04) +#define GPIO_PPDSDR_UART_3 (0x08) +#define GPIO_PPDSDR_UART_4 (0x10) +#define GPIO_PPDSDR_UART_5 (0x20) +#define GPIO_PPDSDR_UART_6 (0x40) +#define GPIO_PPDSDR_UART_7 (0x80) + +/* Bit definitions and macros for GPIO_PPDSDR_QSPI */ +#define GPIO_PPDSDR_QSPI_0 (0x01) +#define GPIO_PPDSDR_QSPI_1 (0x02) +#define GPIO_PPDSDR_QSPI_2 (0x04) +#define GPIO_PPDSDR_QSPI_3 (0x08) +#define GPIO_PPDSDR_QSPI_4 (0x10) +#define GPIO_PPDSDR_QSPI_5 (0x20) + +/* Bit definitions and macros for GPIO_PPDSDR_TIMER */ +#define GPIO_PPDSDR_TIMER_0 (0x01) +#define GPIO_PPDSDR_TIMER_1 (0x02) +#define GPIO_PPDSDR_TIMER_2 (0x04) +#define GPIO_PPDSDR_TIMER_3 (0x08) + +/* Bit definitions and macros for GPIO_PPDSDR_LCDDATAH */ +#define GPIO_PPDSDR_LCDDATAH_0 (0x01) +#define GPIO_PPDSDR_LCDDATAH_1 (0x02) + +/* Bit definitions and macros for GPIO_PPDSDR_LCDDATAM */ +#define GPIO_PPDSDR_LCDDATAM_0 (0x01) +#define GPIO_PPDSDR_LCDDATAM_1 (0x02) +#define GPIO_PPDSDR_LCDDATAM_2 (0x04) +#define GPIO_PPDSDR_LCDDATAM_3 (0x08) +#define GPIO_PPDSDR_LCDDATAM_4 (0x10) +#define GPIO_PPDSDR_LCDDATAM_5 (0x20) +#define GPIO_PPDSDR_LCDDATAM_6 (0x40) +#define GPIO_PPDSDR_LCDDATAM_7 (0x80) + +/* Bit definitions and macros for GPIO_PPDSDR_LCDDATAL */ +#define GPIO_PPDSDR_LCDDATAL_0 (0x01) +#define GPIO_PPDSDR_LCDDATAL_1 (0x02) +#define GPIO_PPDSDR_LCDDATAL_2 (0x04) +#define GPIO_PPDSDR_LCDDATAL_3 (0x08) +#define GPIO_PPDSDR_LCDDATAL_4 (0x10) +#define GPIO_PPDSDR_LCDDATAL_5 (0x20) +#define GPIO_PPDSDR_LCDDATAL_6 (0x40) +#define GPIO_PPDSDR_LCDDATAL_7 (0x80) + +/* Bit definitions and macros for GPIO_PPDSDR_LCDCTLH */ +#define GPIO_PPDSDR_LCDCTLH_0 (0x01) + +/* Bit definitions and macros for GPIO_PPDSDR_LCDCTLL */ +#define GPIO_PPDSDR_LCDCTLL_0 (0x01) +#define GPIO_PPDSDR_LCDCTLL_1 (0x02) +#define GPIO_PPDSDR_LCDCTLL_2 (0x04) +#define GPIO_PPDSDR_LCDCTLL_3 (0x08) +#define GPIO_PPDSDR_LCDCTLL_4 (0x10) +#define GPIO_PPDSDR_LCDCTLL_5 (0x20) +#define GPIO_PPDSDR_LCDCTLL_6 (0x40) +#define GPIO_PPDSDR_LCDCTLL_7 (0x80) + +/* Bit definitions and macros for GPIO_PCLRR_FECH */ +#define GPIO_PCLRR_FECH_L0 (0x01) +#define GPIO_PCLRR_FECH_L1 (0x02) +#define GPIO_PCLRR_FECH_L2 (0x04) +#define GPIO_PCLRR_FECH_L3 (0x08) +#define GPIO_PCLRR_FECH_L4 (0x10) +#define GPIO_PCLRR_FECH_L5 (0x20) +#define GPIO_PCLRR_FECH_L6 (0x40) +#define GPIO_PCLRR_FECH_L7 (0x80) + +/* Bit definitions and macros for GPIO_PCLRR_SSI */ +#define GPIO_PCLRR_SSI_0 (0x01) +#define GPIO_PCLRR_SSI_1 (0x02) +#define GPIO_PCLRR_SSI_2 (0x04) +#define GPIO_PCLRR_SSI_3 (0x08) +#define GPIO_PCLRR_SSI_4 (0x10) + +/* Bit definitions and macros for GPIO_PCLRR_BUSCTL */ +#define GPIO_PCLRR_BUSCTL_L0 (0x01) +#define GPIO_PCLRR_BUSCTL_L1 (0x02) +#define GPIO_PCLRR_BUSCTL_L2 (0x04) +#define GPIO_PCLRR_BUSCTL_L3 (0x08) + +/* Bit definitions and macros for GPIO_PCLRR_BE */ +#define GPIO_PCLRR_BE_0 (0x01) +#define GPIO_PCLRR_BE_1 (0x02) +#define GPIO_PCLRR_BE_2 (0x04) +#define GPIO_PCLRR_BE_3 (0x08) + +/* Bit definitions and macros for GPIO_PCLRR_CS */ +#define GPIO_PCLRR_CS_1 (0x02) +#define GPIO_PCLRR_CS_2 (0x04) +#define GPIO_PCLRR_CS_3 (0x08) +#define GPIO_PCLRR_CS_4 (0x10) +#define GPIO_PCLRR_CS_5 (0x20) + +/* Bit definitions and macros for GPIO_PCLRR_PWM */ +#define GPIO_PCLRR_PWM_2 (0x04) +#define GPIO_PCLRR_PWM_3 (0x08) +#define GPIO_PCLRR_PWM_4 (0x10) +#define GPIO_PCLRR_PWM_5 (0x20) + +/* Bit definitions and macros for GPIO_PCLRR_FECI2C */ +#define GPIO_PCLRR_FECI2C_0 (0x01) +#define GPIO_PCLRR_FECI2C_1 (0x02) +#define GPIO_PCLRR_FECI2C_2 (0x04) +#define GPIO_PCLRR_FECI2C_3 (0x08) + +/* Bit definitions and macros for GPIO_PCLRR_UART */ +#define GPIO_PCLRR_UART0 (0x01) +#define GPIO_PCLRR_UART1 (0x02) +#define GPIO_PCLRR_UART2 (0x04) +#define GPIO_PCLRR_UART3 (0x08) +#define GPIO_PCLRR_UART4 (0x10) +#define GPIO_PCLRR_UART5 (0x20) +#define GPIO_PCLRR_UART6 (0x40) +#define GPIO_PCLRR_UART7 (0x80) + +/* Bit definitions and macros for GPIO_PCLRR_QSPI */ +#define GPIO_PCLRR_QSPI0 (0x01) +#define GPIO_PCLRR_QSPI1 (0x02) +#define GPIO_PCLRR_QSPI2 (0x04) +#define GPIO_PCLRR_QSPI3 (0x08) +#define GPIO_PCLRR_QSPI4 (0x10) +#define GPIO_PCLRR_QSPI5 (0x20) + +/* Bit definitions and macros for GPIO_PCLRR_TIMER */ +#define GPIO_PCLRR_TIMER0 (0x01) +#define GPIO_PCLRR_TIMER1 (0x02) +#define GPIO_PCLRR_TIMER2 (0x04) +#define GPIO_PCLRR_TIMER3 (0x08) + +/* Bit definitions and macros for GPIO_PCLRR_LCDDATAH */ +#define GPIO_PCLRR_LCDDATAH0 (0x01) +#define GPIO_PCLRR_LCDDATAH1 (0x02) + +/* Bit definitions and macros for GPIO_PCLRR_LCDDATAM */ +#define GPIO_PCLRR_LCDDATAM0 (0x01) +#define GPIO_PCLRR_LCDDATAM1 (0x02) +#define GPIO_PCLRR_LCDDATAM2 (0x04) +#define GPIO_PCLRR_LCDDATAM3 (0x08) +#define GPIO_PCLRR_LCDDATAM4 (0x10) +#define GPIO_PCLRR_LCDDATAM5 (0x20) +#define GPIO_PCLRR_LCDDATAM6 (0x40) +#define GPIO_PCLRR_LCDDATAM7 (0x80) + +/* Bit definitions and macros for GPIO_PCLRR_LCDDATAL */ +#define GPIO_PCLRR_LCDDATAL0 (0x01) +#define GPIO_PCLRR_LCDDATAL1 (0x02) +#define GPIO_PCLRR_LCDDATAL2 (0x04) +#define GPIO_PCLRR_LCDDATAL3 (0x08) +#define GPIO_PCLRR_LCDDATAL4 (0x10) +#define GPIO_PCLRR_LCDDATAL5 (0x20) +#define GPIO_PCLRR_LCDDATAL6 (0x40) +#define GPIO_PCLRR_LCDDATAL7 (0x80) + +/* Bit definitions and macros for GPIO_PCLRR_LCDCTLH */ +#define GPIO_PCLRR_LCDCTLH_PCLRR_LCDCTLH0 (0x01) + +/* Bit definitions and macros for GPIO_PCLRR_LCDCTLL */ +#define GPIO_PCLRR_LCDCTLL0 (0x01) +#define GPIO_PCLRR_LCDCTLL1 (0x02) +#define GPIO_PCLRR_LCDCTLL2 (0x04) +#define GPIO_PCLRR_LCDCTLL3 (0x08) +#define GPIO_PCLRR_LCDCTLL4 (0x10) +#define GPIO_PCLRR_LCDCTLL5 (0x20) +#define GPIO_PCLRR_LCDCTLL6 (0x40) +#define GPIO_PCLRR_LCDCTLL7 (0x80) + +/* Bit definitions and macros for GPIO_PAR_FEC */ +#define GPIO_PAR_FEC_MII(x) (((x)&0x03)<<0) +#define GPIO_PAR_FEC_7W(x) (((x)&0x03)<<2) +#define GPIO_PAR_FEC_7W_GPIO (0x00) +#define GPIO_PAR_FEC_7W_URTS1 (0x04) +#define GPIO_PAR_FEC_7W_FEC (0x0C) +#define GPIO_PAR_FEC_MII_GPIO (0x00) +#define GPIO_PAR_FEC_MII_UART (0x01) +#define GPIO_PAR_FEC_MII_FEC (0x03) + +/* Bit definitions and macros for GPIO_PAR_PWM */ +#define GPIO_PAR_PWM1(x) (((x)&0x03)<<0) +#define GPIO_PAR_PWM3(x) (((x)&0x03)<<2) +#define GPIO_PAR_PWM5 (0x10) +#define GPIO_PAR_PWM7 (0x20) + +/* Bit definitions and macros for GPIO_PAR_BUSCTL */ +#define GPIO_PAR_BUSCTL_TS(x) (((x)&0x03)<<3) +#define GPIO_PAR_BUSCTL_RWB (0x20) +#define GPIO_PAR_BUSCTL_TA (0x40) +#define GPIO_PAR_BUSCTL_OE (0x80) +#define GPIO_PAR_BUSCTL_OE_GPIO (0x00) +#define GPIO_PAR_BUSCTL_OE_OE (0x80) +#define GPIO_PAR_BUSCTL_TA_GPIO (0x00) +#define GPIO_PAR_BUSCTL_TA_TA (0x40) +#define GPIO_PAR_BUSCTL_RWB_GPIO (0x00) +#define GPIO_PAR_BUSCTL_RWB_RWB (0x20) +#define GPIO_PAR_BUSCTL_TS_GPIO (0x00) +#define GPIO_PAR_BUSCTL_TS_DACK0 (0x10) +#define GPIO_PAR_BUSCTL_TS_TS (0x18) + +/* Bit definitions and macros for GPIO_PAR_FECI2C */ +#define GPIO_PAR_FECI2C_SDA(x) (((x)&0x03)<<0) +#define GPIO_PAR_FECI2C_SCL(x) (((x)&0x03)<<2) +#define GPIO_PAR_FECI2C_MDIO(x) (((x)&0x03)<<4) +#define GPIO_PAR_FECI2C_MDC(x) (((x)&0x03)<<6) +#define GPIO_PAR_FECI2C_MDC_GPIO (0x00) +#define GPIO_PAR_FECI2C_MDC_UTXD2 (0x40) +#define GPIO_PAR_FECI2C_MDC_SCL (0x80) +#define GPIO_PAR_FECI2C_MDC_EMDC (0xC0) +#define GPIO_PAR_FECI2C_MDIO_GPIO (0x00) +#define GPIO_PAR_FECI2C_MDIO_URXD2 (0x10) +#define GPIO_PAR_FECI2C_MDIO_SDA (0x20) +#define GPIO_PAR_FECI2C_MDIO_EMDIO (0x30) +#define GPIO_PAR_FECI2C_SCL_GPIO (0x00) +#define GPIO_PAR_FECI2C_SCL_UTXD2 (0x04) +#define GPIO_PAR_FECI2C_SCL_SCL (0x0C) +#define GPIO_PAR_FECI2C_SDA_GPIO (0x00) +#define GPIO_PAR_FECI2C_SDA_URXD2 (0x02) +#define GPIO_PAR_FECI2C_SDA_SDA (0x03) + +/* Bit definitions and macros for GPIO_PAR_BE */ +#define GPIO_PAR_BE0 (0x01) +#define GPIO_PAR_BE1 (0x02) +#define GPIO_PAR_BE2 (0x04) +#define GPIO_PAR_BE3 (0x08) + +/* Bit definitions and macros for GPIO_PAR_CS */ +#define GPIO_PAR_CS1 (0x02) +#define GPIO_PAR_CS2 (0x04) +#define GPIO_PAR_CS3 (0x08) +#define GPIO_PAR_CS4 (0x10) +#define GPIO_PAR_CS5 (0x20) +#define GPIO_PAR_CS1_GPIO (0x00) +#define GPIO_PAR_CS1_SDCS1 (0x01) +#define GPIO_PAR_CS1_CS1 (0x03) + +/* Bit definitions and macros for GPIO_PAR_SSI */ +#define GPIO_PAR_SSI_MCLK (0x0080) +#define GPIO_PAR_SSI_TXD(x) (((x)&0x0003)<<8) +#define GPIO_PAR_SSI_RXD(x) (((x)&0x0003)<<10) +#define GPIO_PAR_SSI_FS(x) (((x)&0x0003)<<12) +#define GPIO_PAR_SSI_BCLK(x) (((x)&0x0003)<<14) + +/* Bit definitions and macros for GPIO_PAR_UART */ +#define GPIO_PAR_UART_TXD0 (0x0001) +#define GPIO_PAR_UART_RXD0 (0x0002) +#define GPIO_PAR_UART_RTS0 (0x0004) +#define GPIO_PAR_UART_CTS0 (0x0008) +#define GPIO_PAR_UART_TXD1(x) (((x)&0x0003)<<4) +#define GPIO_PAR_UART_RXD1(x) (((x)&0x0003)<<6) +#define GPIO_PAR_UART_RTS1(x) (((x)&0x0003)<<8) +#define GPIO_PAR_UART_CTS1(x) (((x)&0x0003)<<10) +#define GPIO_PAR_UART_CTS1_GPIO (0x0000) +#define GPIO_PAR_UART_CTS1_SSI_BCLK (0x0800) +#define GPIO_PAR_UART_CTS1_ULPI_D7 (0x0400) +#define GPIO_PAR_UART_CTS1_UCTS1 (0x0C00) +#define GPIO_PAR_UART_RTS1_GPIO (0x0000) +#define GPIO_PAR_UART_RTS1_SSI_FS (0x0200) +#define GPIO_PAR_UART_RTS1_ULPI_D6 (0x0100) +#define GPIO_PAR_UART_RTS1_URTS1 (0x0300) +#define GPIO_PAR_UART_RXD1_GPIO (0x0000) +#define GPIO_PAR_UART_RXD1_SSI_RXD (0x0080) +#define GPIO_PAR_UART_RXD1_ULPI_D5 (0x0040) +#define GPIO_PAR_UART_RXD1_URXD1 (0x00C0) +#define GPIO_PAR_UART_TXD1_GPIO (0x0000) +#define GPIO_PAR_UART_TXD1_SSI_TXD (0x0020) +#define GPIO_PAR_UART_TXD1_ULPI_D4 (0x0010) +#define GPIO_PAR_UART_TXD1_UTXD1 (0x0030) + +/* Bit definitions and macros for GPIO_PAR_QSPI */ +#define GPIO_PAR_QSPI_SCK(x) (((x)&0x0003)<<4) +#define GPIO_PAR_QSPI_DOUT(x) (((x)&0x0003)<<6) +#define GPIO_PAR_QSPI_DIN(x) (((x)&0x0003)<<8) +#define GPIO_PAR_QSPI_PCS0(x) (((x)&0x0003)<<10) +#define GPIO_PAR_QSPI_PCS1(x) (((x)&0x0003)<<12) +#define GPIO_PAR_QSPI_PCS2(x) (((x)&0x0003)<<14) + +/* Bit definitions and macros for GPIO_PAR_TIMER */ +#define GPIO_PAR_TIN0(x) (((x)&0x03)<<0) +#define GPIO_PAR_TIN1(x) (((x)&0x03)<<2) +#define GPIO_PAR_TIN2(x) (((x)&0x03)<<4) +#define GPIO_PAR_TIN3(x) (((x)&0x03)<<6) +#define GPIO_PAR_TIN3_GPIO (0x00) +#define GPIO_PAR_TIN3_TOUT3 (0x80) +#define GPIO_PAR_TIN3_URXD2 (0x40) +#define GPIO_PAR_TIN3_TIN3 (0xC0) +#define GPIO_PAR_TIN2_GPIO (0x00) +#define GPIO_PAR_TIN2_TOUT2 (0x20) +#define GPIO_PAR_TIN2_UTXD2 (0x10) +#define GPIO_PAR_TIN2_TIN2 (0x30) +#define GPIO_PAR_TIN1_GPIO (0x00) +#define GPIO_PAR_TIN1_TOUT1 (0x08) +#define GPIO_PAR_TIN1_DACK1 (0x04) +#define GPIO_PAR_TIN1_TIN1 (0x0C) +#define GPIO_PAR_TIN0_GPIO (0x00) +#define GPIO_PAR_TIN0_TOUT0 (0x02) +#define GPIO_PAR_TIN0_DREQ0 (0x01) +#define GPIO_PAR_TIN0_TIN0 (0x03) + +/* Bit definitions and macros for GPIO_PAR_LCDDATA */ +#define GPIO_PAR_LCDDATA_LD7_0(x) ((x)&0x03) +#define GPIO_PAR_LCDDATA_LD15_8(x) (((x)&0x03)<<2) +#define GPIO_PAR_LCDDATA_LD16(x) (((x)&0x03)<<4) +#define GPIO_PAR_LCDDATA_LD17(x) (((x)&0x03)<<6) + +/* Bit definitions and macros for GPIO_PAR_LCDCTL */ +#define GPIO_PAR_LCDCTL_CLS (0x0001) +#define GPIO_PAR_LCDCTL_PS (0x0002) +#define GPIO_PAR_LCDCTL_REV (0x0004) +#define GPIO_PAR_LCDCTL_SPL_SPR (0x0008) +#define GPIO_PAR_LCDCTL_CONTRAST (0x0010) +#define GPIO_PAR_LCDCTL_LSCLK (0x0020) +#define GPIO_PAR_LCDCTL_LP_HSYNC (0x0040) +#define GPIO_PAR_LCDCTL_FLM_VSYNC (0x0080) +#define GPIO_PAR_LCDCTL_ACD_OE (0x0100) + +/* Bit definitions and macros for GPIO_PAR_IRQ */ +#define GPIO_PAR_IRQ1(x) (((x)&0x0003)<<4) +#define GPIO_PAR_IRQ2(x) (((x)&0x0003)<<6) +#define GPIO_PAR_IRQ4(x) (((x)&0x0003)<<8) +#define GPIO_PAR_IRQ5(x) (((x)&0x0003)<<10) +#define GPIO_PAR_IRQ6(x) (((x)&0x0003)<<12) + +/* Bit definitions and macros for GPIO_MSCR_FLEXBUS */ +#define GPIO_MSCR_FLEXBUS_ADDRCTL(x) ((x)&0x03) +#define GPIO_MSCR_FLEXBUS_DLOWER(x) (((x)&0x03)<<2) +#define GPIO_MSCR_FLEXBUS_DUPPER(x) (((x)&0x03)<<4) + +/* Bit definitions and macros for GPIO_MSCR_SDRAM */ +#define GPIO_MSCR_SDRAM_SDRAM(x) ((x)&0x03) +#define GPIO_MSCR_SDRAM_SDCLK(x) (((x)&0x03)<<2) +#define GPIO_MSCR_SDRAM_SDCLKB(x) (((x)&0x03)<<4) + +/* Bit definitions and macros for GPIO_DSCR_I2C */ +#define GPIO_DSCR_I2C_DSE(x) ((x)&0x03) + +/* Bit definitions and macros for GPIO_DSCR_PWM */ +#define GPIO_DSCR_PWM_DSE(x) ((x)&0x03) + +/* Bit definitions and macros for GPIO_DSCR_FEC */ +#define GPIO_DSCR_FEC_DSE(x) ((x)&0x03) + +/* Bit definitions and macros for GPIO_DSCR_UART */ +#define GPIO_DSCR_UART0_DSE(x) ((x)&0x03) +#define GPIO_DSCR_UART1_DSE(x) (((x)&0x03)<<2) + +/* Bit definitions and macros for GPIO_DSCR_QSPI */ +#define GPIO_DSCR_QSPI_DSE(x) ((x)&0x03) + +/* Bit definitions and macros for GPIO_DSCR_TIMER */ +#define GPIO_DSCR_TIMER_DSE(x) ((x)&0x03) + +/* Bit definitions and macros for GPIO_DSCR_SSI */ +#define GPIO_DSCR_SSI_DSE(x) ((x)&0x03) + +/* Bit definitions and macros for GPIO_DSCR_LCD */ +#define GPIO_DSCR_LCD_DSE(x) ((x)&0x03) + +/* Bit definitions and macros for GPIO_DSCR_DEBUG */ +#define GPIO_DSCR_DEBUG_DSE(x) ((x)&0x03) + +/* Bit definitions and macros for GPIO_DSCR_CLKRST */ +#define GPIO_DSCR_CLKRST_DSE(x) ((x)&0x03) + +/* Bit definitions and macros for GPIO_DSCR_IRQ */ +#define GPIO_DSCR_IRQ_DSE(x) ((x)&0x03) + +/* not done yet */ +/********************************************************************* +* LCD Controller (LCDC) +*********************************************************************/ +/* Bit definitions and macros for LCDC_LSSAR */ +#define LCDC_LSSAR_SSA(x) (((x)&0x3FFFFFFF)<<2) + +/* Bit definitions and macros for LCDC_LSR */ +#define LCDC_LSR_YMAX(x) (((x)&0x000003FF)<<0) +#define LCDC_LSR_XMAX(x) (((x)&0x0000003F)<<20) + +/* Bit definitions and macros for LCDC_LVPWR */ +#define LCDC_LVPWR_VPW(x) (((x)&0x000003FF)<<0) + +/* Bit definitions and macros for LCDC_LCPR */ +#define LCDC_LCPR_CYP(x) (((x)&0x000003FF)<<0) +#define LCDC_LCPR_CXP(x) (((x)&0x000003FF)<<16) +#define LCDC_LCPR_OP (0x10000000) +#define LCDC_LCPR_CC(x) (((x)&0x00000003)<<30) +#define LCDC_LCPR_CC_TRANSPARENT (0x00000000) +#define LCDC_LCPR_CC_OR (0x40000000) +#define LCDC_LCPR_CC_XOR (0x80000000) +#define LCDC_LCPR_CC_AND (0xC0000000) +#define LCDC_LCPR_OP_ON (0x10000000) +#define LCDC_LCPR_OP_OFF (0x00000000) + +/* Bit definitions and macros for LCDC_LCWHBR */ +#define LCDC_LCWHBR_BD(x) (((x)&0x000000FF)<<0) +#define LCDC_LCWHBR_CH(x) (((x)&0x0000001F)<<16) +#define LCDC_LCWHBR_CW(x) (((x)&0x0000001F)<<24) +#define LCDC_LCWHBR_BK_EN (0x80000000) +#define LCDC_LCWHBR_BK_EN_ON (0x80000000) +#define LCDC_LCWHBR_BK_EN_OFF (0x00000000) + +/* Bit definitions and macros for LCDC_LCCMR */ +#define LCDC_LCCMR_CUR_COL_B(x) (((x)&0x0000003F)<<0) +#define LCDC_LCCMR_CUR_COL_G(x) (((x)&0x0000003F)<<6) +#define LCDC_LCCMR_CUR_COL_R(x) (((x)&0x0000003F)<<12) + +/* Bit definitions and macros for LCDC_LPCR */ +#define LCDC_LPCR_PCD(x) (((x)&0x0000003F)<<0) +#define LCDC_LPCR_SHARP (0x00000040) +#define LCDC_LPCR_SCLKSEL (0x00000080) +#define LCDC_LPCR_ACD(x) (((x)&0x0000007F)<<8) +#define LCDC_LPCR_ACDSEL (0x00008000) +#define LCDC_LPCR_REV_VS (0x00010000) +#define LCDC_LPCR_SWAP_SEL (0x00020000) +#define LCDC_LPCR_ENDSEL (0x00040000) +#define LCDC_LPCR_SCLKIDLE (0x00080000) +#define LCDC_LPCR_OEPOL (0x00100000) +#define LCDC_LPCR_CLKPOL (0x00200000) +#define LCDC_LPCR_LPPOL (0x00400000) +#define LCDC_LPCR_FLM (0x00800000) +#define LCDC_LPCR_PIXPOL (0x01000000) +#define LCDC_LPCR_BPIX(x) (((x)&0x00000007)<<25) +#define LCDC_LPCR_PBSIZ(x) (((x)&0x00000003)<<28) +#define LCDC_LPCR_COLOR (0x40000000) +#define LCDC_LPCR_TFT (0x80000000) +#define LCDC_LPCR_MODE_MONOCHROME (0x00000000) +#define LCDC_LPCR_MODE_CSTN (0x40000000) +#define LCDC_LPCR_MODE_TFT (0xC0000000) +#define LCDC_LPCR_PBSIZ_1 (0x00000000) +#define LCDC_LPCR_PBSIZ_2 (0x10000000) +#define LCDC_LPCR_PBSIZ_4 (0x20000000) +#define LCDC_LPCR_PBSIZ_8 (0x30000000) +#define LCDC_LPCR_BPIX_1bpp (0x00000000) +#define LCDC_LPCR_BPIX_2bpp (0x02000000) +#define LCDC_LPCR_BPIX_4bpp (0x04000000) +#define LCDC_LPCR_BPIX_8bpp (0x06000000) +#define LCDC_LPCR_BPIX_12bpp (0x08000000) +#define LCDC_LPCR_BPIX_16bpp (0x0A000000) +#define LCDC_LPCR_BPIX_18bpp (0x0C000000) + +#define LCDC_LPCR_PANEL_TYPE(x) (((x)&0x00000003)<<30) + +/* Bit definitions and macros for LCDC_LHCR */ +#define LCDC_LHCR_H_WAIT_2(x) (((x)&0x000000FF)<<0) +#define LCDC_LHCR_H_WAIT_1(x) (((x)&0x000000FF)<<8) +#define LCDC_LHCR_H_WIDTH(x) (((x)&0x0000003F)<<26) + +/* Bit definitions and macros for LCDC_LVCR */ +#define LCDC_LVCR_V_WAIT_2(x) (((x)&0x000000FF)<<0) +#define LCDC_LVCR_V_WAIT_1(x) (((x)&0x000000FF)<<8) +#define LCDC_LVCR_V_WIDTH(x) (((x)&0x0000003F)<<26) + +/* Bit definitions and macros for LCDC_LPOR */ +#define LCDC_LPOR_POS(x) (((x)&0x0000001F)<<0) + +/* Bit definitions and macros for LCDC_LPCCR */ +#define LCDC_LPCCR_PW(x) (((x)&0x000000FF)<<0) +#define LCDC_LPCCR_CC_EN (0x00000100) +#define LCDC_LPCCR_SCR(x) (((x)&0x00000003)<<9) +#define LCDC_LPCCR_LDMSK (0x00008000) +#define LCDC_LPCCR_CLS_HI_WIDTH(x) (((x)&0x000001FF)<<16) +#define LCDC_LPCCR_SCR_LINEPULSE (0x00000000) +#define LCDC_LPCCR_SCR_PIXELCLK (0x00002000) +#define LCDC_LPCCR_SCR_LCDCLOCK (0x00004000) + +/* Bit definitions and macros for LCDC_LDCR */ +#define LCDC_LDCR_TM(x) (((x)&0x0000001F)<<0) +#define LCDC_LDCR_HM(x) (((x)&0x0000001F)<<16) +#define LCDC_LDCR_BURST (0x80000000) + +/* Bit definitions and macros for LCDC_LRMCR */ +#define LCDC_LRMCR_SEL_REF (0x00000001) + +/* Bit definitions and macros for LCDC_LICR */ +#define LCDC_LICR_INTCON (0x00000001) +#define LCDC_LICR_INTSYN (0x00000004) +#define LCDC_LICR_GW_INT_CON (0x00000010) + +/* Bit definitions and macros for LCDC_LIER */ +#define LCDC_LIER_BOF_EN (0x00000001) +#define LCDC_LIER_EOF_EN (0x00000002) +#define LCDC_LIER_ERR_RES_EN (0x00000004) +#define LCDC_LIER_UDR_ERR_EN (0x00000008) +#define LCDC_LIER_GW_BOF_EN (0x00000010) +#define LCDC_LIER_GW_EOF_EN (0x00000020) +#define LCDC_LIER_GW_ERR_RES_EN (0x00000040) +#define LCDC_LIER_GW_UDR_ERR_EN (0x00000080) + +/* Bit definitions and macros for LCDC_LISR */ +#define LCDC_LISR_BOF (0x00000001) +#define LCDC_LISR_EOF (0x00000002) +#define LCDC_LISR_ERR_RES (0x00000004) +#define LCDC_LISR_UDR_ERR (0x00000008) +#define LCDC_LISR_GW_BOF (0x00000010) +#define LCDC_LISR_GW_EOF (0x00000020) +#define LCDC_LISR_GW_ERR_RES (0x00000040) +#define LCDC_LISR_GW_UDR_ERR (0x00000080) + +/* Bit definitions and macros for LCDC_LGWSAR */ +#define LCDC_LGWSAR_GWSA(x) (((x)&0x3FFFFFFF)<<2) + +/* Bit definitions and macros for LCDC_LGWSR */ +#define LCDC_LGWSR_GWH(x) (((x)&0x000003FF)<<0) +#define LCDC_LGWSR_GWW(x) (((x)&0x0000003F)<<20) + +/* Bit definitions and macros for LCDC_LGWVPWR */ +#define LCDC_LGWVPWR_GWVPW(x) (((x)&0x000003FF)<<0) + +/* Bit definitions and macros for LCDC_LGWPOR */ +#define LCDC_LGWPOR_GWPO(x) (((x)&0x0000001F)<<0) + +/* Bit definitions and macros for LCDC_LGWPR */ +#define LCDC_LGWPR_GWYP(x) (((x)&0x000003FF)<<0) +#define LCDC_LGWPR_GWXP(x) (((x)&0x000003FF)<<16) + +/* Bit definitions and macros for LCDC_LGWCR */ +#define LCDC_LGWCR_GWCKB(x) (((x)&0x0000003F)<<0) +#define LCDC_LGWCR_GWCKG(x) (((x)&0x0000003F)<<6) +#define LCDC_LGWCR_GWCKR(x) (((x)&0x0000003F)<<12) +#define LCDC_LGWCR_GW_RVS (0x00200000) +#define LCDC_LGWCR_GWE (0x00400000) +#define LCDC_LGWCR_GWCKE (0x00800000) +#define LCDC_LGWCR_GWAV(x) (((x)&0x000000FF)<<24) + +/* Bit definitions and macros for LCDC_LGWDCR */ +#define LCDC_LGWDCR_GWTM(x) (((x)&0x0000001F)<<0) +#define LCDC_LGWDCR_GWHM(x) (((x)&0x0000001F)<<16) +#define LCDC_LGWDCR_GWBT (0x80000000) + +/* Bit definitions and macros for LCDC_BPLUT_BASE */ +#define LCDC_BPLUT_BASE_BASE(x) (((x)&0xFFFFFFFF)<<0) + +/* Bit definitions and macros for LCDC_GWLUT_BASE */ +#define LCDC_GWLUT_BASE_BASE(x) (((x)&0xFFFFFFFF)<<0) + +/* not done yet */ +/********************************************************************* +* USB Controller (USB) +*********************************************************************/ +/* Bit definitions and macros for USB_HCSPARAMS */ +#define USB_HCSPARAMS_N_PORTS(x) ((x)&0x0000000F) +#define USB_HCSPARAMS_PPC (0x00000010) +#define USB_HCSPARAMS_N_PCC(x) (((x)&0x0000000F)<<8) +#define USB_HCSPARAMS_N_CC(x) (((x)&0x0000000F)<<12) +#define USB_HCSPARAMS_PI (0x00010000) +#define USB_HCSPARAMS_N_PTT(x) (((x)&0x0000000F)<<20) +#define USB_HCSPARAMS_N_TT(x) (((x)&0x0000000F)<<24) + +/* Bit definitions and macros for USB_HCCPARAMS */ +#define USB_HCCPARAMS_ADC (0x00000001) +#define USB_HCCPARAMS_PFL (0x00000002) +#define USB_HCCPARAMS_ASP (0x00000004) +#define USB_HCCPARAMS_IST(x) (((x)&0x0000000F)<<4) +#define USB_HCCPARAMS_EECP(x) (((x)&0x000000FF)<<8) + +/* Bit definitions and macros for USB_DCIVERSION */ +#define USB_DCIVERSION_DCIVERSION(x) (((x)&0xFFFF)<<0) + +/* Bit definitions and macros for USB_DCCPARAMS */ +#define USB_DCCPARAMS_DEN(x) (((x)&0x0000001F)<<0) +#define USB_DCCPARAMS_DC (0x00000080) +#define USB_DCCPARAMS_HC (0x00000100) + +/* Bit definitions and macros for USB_USBCMD */ +#define USB_USBCMD_RS (0x00000001) +#define USB_USBCMD_RST (0x00000002) +#define USB_USBCMD_FS0 (0x00000004) +#define USB_USBCMD_FS1 (0x00000008) +#define USB_USBCMD_PSE (0x00000010) +#define USB_USBCMD_ASE (0x00000020) +#define USB_USBCMD_IAA (0x00000040) +#define USB_USBCMD_LR (0x00000080) +#define USB_USBCMD_ASP(x) (((x)&0x00000003)<<8) +#define USB_USBCMD_ASPE (0x00000800) +#define USB_USBCMD_SUTW (0x00002000) +#define USB_USBCMD_ATDTW (0x00004000) +#define USB_USBCMD_FS2 (0x00008000) +#define USB_USBCMD_ITC(x) (((x)&0x000000FF)<<16) +#define USB_USBCMD_ITC_IMM (0x00000000) +#define USB_USBCMD_ITC_1 (0x00010000) +#define USB_USBCMD_ITC_2 (0x00020000) +#define USB_USBCMD_ITC_4 (0x00040000) +#define USB_USBCMD_ITC_8 (0x00080000) +#define USB_USBCMD_ITC_16 (0x00100000) +#define USB_USBCMD_ITC_32 (0x00200000) +#define USB_USBCMD_ITC_40 (0x00400000) +#define USB_USBCMD_FS_1024 (0x00000000) +#define USB_USBCMD_FS_512 (0x00000004) +#define USB_USBCMD_FS_256 (0x00000008) +#define USB_USBCMD_FS_128 (0x0000000C) +#define USB_USBCMD_FS_64 (0x00008000) +#define USB_USBCMD_FS_32 (0x00008004) +#define USB_USBCMD_FS_16 (0x00008008) +#define USB_USBCMD_FS_8 (0x0000800C) + +/* Bit definitions and macros for USB_USBSTS */ +#define USB_USBSTS_UI (0x00000001) +#define USB_USBSTS_UEI (0x00000002) +#define USB_USBSTS_PCI (0x00000004) +#define USB_USBSTS_FRI (0x00000008) +#define USB_USBSTS_SEI (0x00000010) +#define USB_USBSTS_AAI (0x00000020) +#define USB_USBSTS_URI (0x00000040) +#define USB_USBSTS_SRI (0x00000080) +#define USB_USBSTS_SLI (0x00000100) +#define USB_USBSTS_HCH (0x00001000) +#define USB_USBSTS_RCL (0x00002000) +#define USB_USBSTS_PS (0x00004000) +#define USB_USBSTS_AS (0x00008000) + +/* Bit definitions and macros for USB_USBINTR */ +#define USB_USBINTR_UE (0x00000001) +#define USB_USBINTR_UEE (0x00000002) +#define USB_USBINTR_PCE (0x00000004) +#define USB_USBINTR_FRE (0x00000008) +#define USB_USBINTR_SEE (0x00000010) +#define USB_USBINTR_AAE (0x00000020) +#define USB_USBINTR_URE (0x00000040) +#define USB_USBINTR_SRE (0x00000080) +#define USB_USBINTR_SLE (0x00000100) + +/* Bit definitions and macros for USB_FRINDEX */ +#define USB_FRINDEX_FRINDEX(x) (((x)&0x00003FFF)<<0) + +/* Bit definitions and macros for USB_PERIODICLISTBASE */ +#define USB_PERIODICLISTBASE_PERBASE(x) (((x)&0x000FFFFF)<<12) + +/* Bit definitions and macros for USB_DEVICEADDR */ +#define USB_DEVICEADDR_USBADR(x) (((x)&0x0000007F)<<25) + +/* Bit definitions and macros for USB_ASYNCLISTADDR */ +#define USB_ASYNCLISTADDR_ASYBASE(x) (((x)&0x07FFFFFF)<<5) + +/* Bit definitions and macros for USB_EPLISTADDR */ +#define USB_EPLISTADDR_EPBASE(x) (((x)&0x001FFFFF)<<11) + +/* Bit definitions and macros for USB_ASNCTTSTS */ +#define USB_ASNCTTSTS_TTAS (0x00000001) +#define USB_ASNCTTSTS_TTAC (0x00000002) + +/* Bit definitions and macros for USB_BURSTSIZE */ +#define USB_BURSTSIZE_RXPBURST(x) (((x)&0x000000FF)<<0) +#define USB_BURSTSIZE_TXPBURST(x) (((x)&0x000000FF)<<8) + +/* Bit definitions and macros for USB_TXFILLTUNING */ +#define USB_TXFILLTUNING_TXSCHOH(x) (((x)&0x000000FF)<<0) +#define USB_TXFILLTUNING_TXSCHHEALTH(x) (((x)&0x0000001F)<<8) +#define USB_TXFILLTUNING_TXFIFOTHRES(x) (((x)&0x0000003F)<<16) + +/* Bit definitions and macros for USB_TXTTFILLTUNING */ +#define USB_TXTTFILLTUNING_TXTTSCHOH(x) (((x)&0x0000001F)<<0) +#define USB_TXTTFILLTUNING_TXTTSCHHEALTH(x) (((x)&0x0000001F)<<8) + +/* Bit definitions and macros for USB_ULPI_VIEWPORT */ +#define USB_ULPI_VIEWPORT_ULPI_DATWR(x) (((x)&0x000000FF)<<0) +#define USB_ULPI_VIEWPORT_ULPI_DATRD(x) (((x)&0x000000FF)<<8) +#define USB_ULPI_VIEWPORT_ULPI_ADDR(x) (((x)&0x000000FF)<<16) +#define USB_ULPI_VIEWPORT_ULPI_PORT(x) (((x)&0x00000007)<<24) +#define USB_ULPI_VIEWPORT_ULPI_SS (0x08000000) +#define USB_ULPI_VIEWPORT_ULPI_RW (0x20000000) +#define USB_ULPI_VIEWPORT_ULPI_RUN (0x40000000) +#define USB_ULPI_VIEWPORT_ULPI_WU (0x80000000) + +/* Bit definitions and macros for USB_CONFIGFLAG */ +#define USB_CONFIGFLAG_CONFIGFLAG(x) (((x)&0xFFFFFFFF)<<0) + +/* Bit definitions and macros for USB_PORTSC */ +#define USB_PORTSC_CCS (0x00000001) +#define USB_PORTSC_CSC (0x00000002) +#define USB_PORTSC_PE (0x00000004) +#define USB_PORTSC_PEC (0x00000008) +#define USB_PORTSC_OCA (0x00000010) +#define USB_PORTSC_OCC (0x00000020) +#define USB_PORTSC_FPR (0x00000040) +#define USB_PORTSC_SUSP (0x00000080) +#define USB_PORTSC_PR (0x00000100) +#define USB_PORTSC_LS(x) (((x)&0x00000003)<<10) +#define USB_PORTSC_PP (0x00001000) +#define USB_PORTSC_PO (0x00002000) +#define USB_PORTSC_PIC(x) (((x)&0x00000003)<<14) +#define USB_PORTSC_PTC(x) (((x)&0x0000000F)<<16) +#define USB_PORTSC_WLCN (0x00100000) +#define USB_PORTSC_WKDS (0x00200000) +#define USB_PORTSC_WKOC (0x00400000) +#define USB_PORTSC_PHCD (0x00800000) +#define USB_PORTSC_PFSC (0x01000000) +#define USB_PORTSC_PSPD(x) (((x)&0x00000003)<<26) +#define USB_PORTSC_PTS(x) (((x)&0x00000003)<<30) +#define USB_PORTSC_PTS_ULPI (0x80000000) +#define USB_PORTSC_PTS_FS_LS (0xC0000000) +#define USB_PORTSC_PSPD_FULL (0x00000000) +#define USB_PORTSC_PSPD_LOW (0x04000000) +#define USB_PORTSC_PSPD_HIGH (0x08000000) +#define USB_PORTSC_PTC_DISBALE (0x00000000) +#define USB_PORTSC_PTC_JSTATE (0x00010000) +#define USB_PORTSC_PTC_KSTATE (0x00020000) +#define USB_PORTSC_PTC_SEQ_NAK (0x00030000) +#define USB_PORTSC_PTC_PACKET (0x00040000) +#define USB_PORTSC_PTC_FORCE_ENABLE (0x00050000) +#define USB_PORTSC_PIC_OFF (0x00000000) +#define USB_PORTSC_PIC_AMBER (0x00004000) +#define USB_PORTSC_PIC_GREEN (0x00008000) +#define USB_PORTSC_LS_SE0 (0x00000000) +#define USB_PORTSC_LS_JSTATE (0x00000400) +#define USB_PORTSC_LS_KSTATE (0x00000800) + +/* Bit definitions and macros for USB_OTGSC */ +#define USB_OTGSC_VD (0x00000001) +#define USB_OTGSC_VC (0x00000002) +#define USB_OTGSC_OT (0x00000008) +#define USB_OTGSC_DP (0x00000010) +#define USB_OTGSC_ID (0x00000100) +#define USB_OTGSC_AVV (0x00000200) +#define USB_OTGSC_ASV (0x00000400) +#define USB_OTGSC_BSV (0x00000800) +#define USB_OTGSC_BSE (0x00001000) +#define USB_OTGSC_1MST (0x00002000) +#define USB_OTGSC_DPS (0x00004000) +#define USB_OTGSC_IDIS (0x00010000) +#define USB_OTGSC_AVVIS (0x00020000) +#define USB_OTGSC_ASVIS (0x00040000) +#define USB_OTGSC_BSVIS (0x00080000) +#define USB_OTGSC_BSEIS (0x00100000) +#define USB_OTGSC_1MSS (0x00200000) +#define USB_OTGSC_DPIS (0x00400000) +#define USB_OTGSC_IDIE (0x01000000) +#define USB_OTGSC_AVVIE (0x02000000) +#define USB_OTGSC_ASVIE (0x04000000) +#define USB_OTGSC_BSVIE (0x08000000) +#define USB_OTGSC_BSEIE (0x10000000) +#define USB_OTGSC_1MSE (0x20000000) +#define USB_OTGSC_DPIE (0x40000000) +#define USB_OTGSC_CLEAR (0x007F0000) +#define USB_OTGSC_ENABLE_ALL (0x7F000000) + +/* Bit definitions and macros for USB_USBMODE */ +#define USB_USBMODE_CM(x) (((x)&0x00000003)<<0) +#define USB_USBMODE_SLOM (0x00000008) +#define USB_USBMODE_SDIS (0x00000010) +#define USB_USBMODE_CM_IDLE (0x00000000) +#define USB_USBMODE_CM_DEVICE (0x00000002) +#define USB_USBMODE_CM_HOST (0x00000003) +#define USB_USBMODE_ES (0x00000004) + +/* Bit definitions and macros for USB_EPSETUPSR */ +#define USB_EPSETUPSR_EPSETUPSTAT(x) (((x)&0x0000003F)<<0) + +/* Bit definitions and macros for USB_EPPRIME */ +#define USB_EPPRIME_PERB(x) (((x)&0x0000003F)<<0) +#define USB_EPPRIME_PETB(x) (((x)&0x0000003F)<<16) +#define USB_EPPRIME_PETB0 (0x00010000) +#define USB_EPPRIME_PETB1 (0x00020000) +#define USB_EPPRIME_PETB2 (0x00040000) +#define USB_EPPRIME_PETB3 (0x00080000) +#define USB_EPPRIME_PETB4 (0x00100000) +#define USB_EPPRIME_PETB5 (0x00200000) +#define USB_EPPRIME_PERB0 (0x00000001) +#define USB_EPPRIME_PERB1 (0x00000002) +#define USB_EPPRIME_PERB2 (0x00000004) +#define USB_EPPRIME_PERB3 (0x00000008) +#define USB_EPPRIME_PERB4 (0x00000010) +#define USB_EPPRIME_PERB5 (0x00000020) + +/* Bit definitions and macros for USB_EPFLUSH */ +#define USB_EPFLUSH_FERB(x) (((x)&0x0000003F)<<0) +#define USB_EPFLUSH_FETB(x) (((x)&0x0000003F)<<16) +#define USB_EPFLUSH_FETB0 (0x00010000) +#define USB_EPFLUSH_FETB1 (0x00020000) +#define USB_EPFLUSH_FETB2 (0x00040000) +#define USB_EPFLUSH_FETB3 (0x00080000) +#define USB_EPFLUSH_FETB4 (0x00100000) +#define USB_EPFLUSH_FETB5 (0x00200000) +#define USB_EPFLUSH_FERB0 (0x00000001) +#define USB_EPFLUSH_FERB1 (0x00000002) +#define USB_EPFLUSH_FERB2 (0x00000004) +#define USB_EPFLUSH_FERB3 (0x00000008) +#define USB_EPFLUSH_FERB4 (0x00000010) +#define USB_EPFLUSH_FERB5 (0x00000020) + +/* Bit definitions and macros for USB_EPSR */ +#define USB_EPSR_ERBR(x) (((x)&0x0000003F)<<0) +#define USB_EPSR_ETBR(x) (((x)&0x0000003F)<<16) +#define USB_EPSR_ETBR0 (0x00010000) +#define USB_EPSR_ETBR1 (0x00020000) +#define USB_EPSR_ETBR2 (0x00040000) +#define USB_EPSR_ETBR3 (0x00080000) +#define USB_EPSR_ETBR4 (0x00100000) +#define USB_EPSR_ETBR5 (0x00200000) +#define USB_EPSR_ERBR0 (0x00000001) +#define USB_EPSR_ERBR1 (0x00000002) +#define USB_EPSR_ERBR2 (0x00000004) +#define USB_EPSR_ERBR3 (0x00000008) +#define USB_EPSR_ERBR4 (0x00000010) +#define USB_EPSR_ERBR5 (0x00000020) + +/* Bit definitions and macros for USB_EPCOMPLETE */ +#define USB_EPCOMPLETE_ERCE(x) (((x)&0x0000003F)<<0) +#define USB_EPCOMPLETE_ETCE(x) (((x)&0x0000003F)<<16) +#define USB_EPCOMPLETE_ETCE0 (0x00010000) +#define USB_EPCOMPLETE_ETCE1 (0x00020000) +#define USB_EPCOMPLETE_ETCE2 (0x00040000) +#define USB_EPCOMPLETE_ETCE3 (0x00080000) +#define USB_EPCOMPLETE_ETCE4 (0x00100000) +#define USB_EPCOMPLETE_ETCE5 (0x00200000) +#define USB_EPCOMPLETE_ERCE0 (0x00000001) +#define USB_EPCOMPLETE_ERCE1 (0x00000002) +#define USB_EPCOMPLETE_ERCE2 (0x00000004) +#define USB_EPCOMPLETE_ERCE3 (0x00000008) +#define USB_EPCOMPLETE_ERCE4 (0x00000010) +#define USB_EPCOMPLETE_ERCE5 (0x00000020) + +/* Bit definitions and macros for USB_EPCR0 */ +#define USB_EPCR0_RXS (0x00000001) +#define USB_EPCR0_RXT(x) (((x)&0x00000003)<<2) +#define USB_EPCR0_RXE (0x00000080) +#define USB_EPCR0_TXS (0x00010000) +#define USB_EPCR0_TXT(x) (((x)&0x00000003)<<18) +#define USB_EPCR0_TXE (0x00800000) + +/* Bit definitions and macros for USB_EPCR */ +#define USB_EPCR_RXS (0x00000001) +#define USB_EPCR_RXD (0x00000002) +#define USB_EPCR_RXT(x) (((x)&0x00000003)<<2) +#define USB_EPCR_RXI (0x00000020) +#define USB_EPCR_RXR (0x00000040) +#define USB_EPCR_RXE (0x00000080) +#define USB_EPCR_TXS (0x00010000) +#define USB_EPCR_TXD (0x00020000) +#define USB_EPCR_TXT(x) (((x)&0x00000003)<<18) +#define USB_EPCR_TXI (0x00200000) +#define USB_EPCR_TXR (0x00400000) +#define USB_EPCR_TXE (0x00800000) +#define USB_EPCR_TXT_CONTROL (0x00000000) +#define USB_EPCR_TXT_ISO (0x00040000) +#define USB_EPCR_TXT_BULK (0x00080000) +#define USB_EPCR_TXT_INT (0x000C0000) +#define USB_EPCR_RXT_CONTROL (0x00000000) +#define USB_EPCR_RXT_ISO (0x00000004) +#define USB_EPCR_RXT_BULK (0x00000008) +#define USB_EPCR_RXT_INT (0x0000000C) + +/********************************************************************* +* SDRAM Controller (SDRAMC) +*********************************************************************/ +/* Bit definitions and macros for SDRAMC_SDMR */ +#define SDRAMC_SDMR_BNKAD_LEMR (0x40000000) +#define SDRAMC_SDMR_BNKAD_LMR (0x00000000) +#define SDRAMC_SDMR_AD(x) (((x)&0x00000FFF)<<18) +#define SDRAMC_SDMR_CMD (0x00010000) + +/* Bit definitions and macros for SDRAMC_SDCR */ +#define SDRAMC_SDCR_MODE_EN (0x80000000) +#define SDRAMC_SDCR_CKE (0x40000000) +#define SDRAMC_SDCR_DDR (0x20000000) +#define SDRAMC_SDCR_REF (0x10000000) +#define SDRAMC_SDCR_MUX(x) (((x)&0x00000003)<<24) +#define SDRAMC_SDCR_OE_RULE (0x00400000) +#define SDRAMC_SDCR_RCNT(x) (((x)&0x0000003F)<<16) +#define SDRAMC_SDCR_PS_32 (0x00000000) +#define SDRAMC_SDCR_PS_16 (0x00002000) +#define SDRAMC_SDCR_DQS_OE(x) (((x)&0x0000000F)<<8) +#define SDRAMC_SDCR_IREF (0x00000004) +#define SDRAMC_SDCR_IPALL (0x00000002) + +/* Bit definitions and macros for SDRAMC_SDCFG1 */ +#define SDRAMC_SDCFG1_SRD2RW(x) (((x)&0x0000000F)<<28) +#define SDRAMC_SDCFG1_SWT2RD(x) (((x)&0x00000007)<<24) +#define SDRAMC_SDCFG1_RDLAT(x) (((x)&0x0000000F)<<20) +#define SDRAMC_SDCFG1_ACT2RW(x) (((x)&0x00000007)<<16) +#define SDRAMC_SDCFG1_PRE2ACT(x) (((x)&0x00000007)<<12) +#define SDRAMC_SDCFG1_REF2ACT(x) (((x)&0x0000000F)<<8) +#define SDRAMC_SDCFG1_WTLAT(x) (((x)&0x00000007)<<4) + +/* Bit definitions and macros for SDRAMC_SDCFG2 */ +#define SDRAMC_SDCFG2_BRD2PRE(x) (((x)&0x0000000F)<<28) +#define SDRAMC_SDCFG2_BWT2RW(x) (((x)&0x0000000F)<<24) +#define SDRAMC_SDCFG2_BRD2WT(x) (((x)&0x0000000F)<<20) +#define SDRAMC_SDCFG2_BL(x) (((x)&0x0000000F)<<16) + +/* Bit definitions and macros for SDRAMC_SDDS */ +#define SDRAMC_SDDS_SB_E(x) (((x)&0x00000003)<<8) +#define SDRAMC_SDDS_SB_C(x) (((x)&0x00000003)<<6) +#define SDRAMC_SDDS_SB_A(x) (((x)&0x00000003)<<4) +#define SDRAMC_SDDS_SB_S(x) (((x)&0x00000003)<<2) +#define SDRAMC_SDDS_SB_D(x) ((x)&0x00000003) + +/* Bit definitions and macros for SDRAMC_SDCS */ +#define SDRAMC_SDCS_BASE(x) (((x)&0x00000FFF)<<20) +#define SDRAMC_SDCS_CSSZ(x) ((x)&0x0000001F) +#define SDRAMC_SDCS_CSSZ_4GBYTE (0x0000001F) +#define SDRAMC_SDCS_CSSZ_2GBYTE (0x0000001E) +#define SDRAMC_SDCS_CSSZ_1GBYTE (0x0000001D) +#define SDRAMC_SDCS_CSSZ_512MBYTE (0x0000001C) +#define SDRAMC_SDCS_CSSZ_256MBYTE (0x0000001B) +#define SDRAMC_SDCS_CSSZ_128MBYTE (0x0000001A) +#define SDRAMC_SDCS_CSSZ_64MBYTE (0x00000019) +#define SDRAMC_SDCS_CSSZ_32MBYTE (0x00000018) +#define SDRAMC_SDCS_CSSZ_16MBYTE (0x00000017) +#define SDRAMC_SDCS_CSSZ_8MBYTE (0x00000016) +#define SDRAMC_SDCS_CSSZ_4MBYTE (0x00000015) +#define SDRAMC_SDCS_CSSZ_2MBYTE (0x00000014) +#define SDRAMC_SDCS_CSSZ_1MBYTE (0x00000013) +#define SDRAMC_SDCS_CSSZ_DIABLE (0x00000000) + +/********************************************************************* +* Synchronous Serial Interface (SSI) +*********************************************************************/ +/* Bit definitions and macros for SSI_CR */ +#define SSI_CR_CIS (0x00000200) +#define SSI_CR_TCH (0x00000100) +#define SSI_CR_MCE (0x00000080) +#define SSI_CR_I2S_SLAVE (0x00000040) +#define SSI_CR_I2S_MASTER (0x00000020) +#define SSI_CR_I2S_NORMAL (0x00000000) +#define SSI_CR_SYN (0x00000010) +#define SSI_CR_NET (0x00000008) +#define SSI_CR_RE (0x00000004) +#define SSI_CR_TE (0x00000002) +#define SSI_CR_SSI_EN (0x00000001) + +/* Bit definitions and macros for SSI_ISR */ +#define SSI_ISR_CMDAU (0x00040000) +#define SSI_ISR_CMDDU (0x00020000) +#define SSI_ISR_RXT (0x00010000) +#define SSI_ISR_RDR1 (0x00008000) +#define SSI_ISR_RDR0 (0x00004000) +#define SSI_ISR_TDE1 (0x00002000) +#define SSI_ISR_TDE0 (0x00001000) +#define SSI_ISR_ROE1 (0x00000800) +#define SSI_ISR_ROE0 (0x00000400) +#define SSI_ISR_TUE1 (0x00000200) +#define SSI_ISR_TUE0 (0x00000100) +#define SSI_ISR_TFS (0x00000080) +#define SSI_ISR_RFS (0x00000040) +#define SSI_ISR_TLS (0x00000020) +#define SSI_ISR_RLS (0x00000010) +#define SSI_ISR_RFF1 (0x00000008) +#define SSI_ISR_RFF0 (0x00000004) +#define SSI_ISR_TFE1 (0x00000002) +#define SSI_ISR_TFE0 (0x00000001) + +/* Bit definitions and macros for SSI_IER */ +#define SSI_IER_RDMAE (0x00400000) +#define SSI_IER_RIE (0x00200000) +#define SSI_IER_TDMAE (0x00100000) +#define SSI_IER_TIE (0x00080000) +#define SSI_IER_CMDAU (0x00040000) +#define SSI_IER_CMDU (0x00020000) +#define SSI_IER_RXT (0x00010000) +#define SSI_IER_RDR1 (0x00008000) +#define SSI_IER_RDR0 (0x00004000) +#define SSI_IER_TDE1 (0x00002000) +#define SSI_IER_TDE0 (0x00001000) +#define SSI_IER_ROE1 (0x00000800) +#define SSI_IER_ROE0 (0x00000400) +#define SSI_IER_TUE1 (0x00000200) +#define SSI_IER_TUE0 (0x00000100) +#define SSI_IER_TFS (0x00000080) +#define SSI_IER_RFS (0x00000040) +#define SSI_IER_TLS (0x00000020) +#define SSI_IER_RLS (0x00000010) +#define SSI_IER_RFF1 (0x00000008) +#define SSI_IER_RFF0 (0x00000004) +#define SSI_IER_TFE1 (0x00000002) +#define SSI_IER_TFE0 (0x00000001) + +/* Bit definitions and macros for SSI_TCR */ +#define SSI_TCR_TXBIT0 (0x00000200) +#define SSI_TCR_TFEN1 (0x00000100) +#define SSI_TCR_TFEN0 (0x00000080) +#define SSI_TCR_TFDIR (0x00000040) +#define SSI_TCR_TXDIR (0x00000020) +#define SSI_TCR_TSHFD (0x00000010) +#define SSI_TCR_TSCKP (0x00000008) +#define SSI_TCR_TFSI (0x00000004) +#define SSI_TCR_TFSL (0x00000002) +#define SSI_TCR_TEFS (0x00000001) + +/* Bit definitions and macros for SSI_RCR */ +#define SSI_RCR_RXEXT (0x00000400) +#define SSI_RCR_RXBIT0 (0x00000200) +#define SSI_RCR_RFEN1 (0x00000100) +#define SSI_RCR_RFEN0 (0x00000080) +#define SSI_RCR_RSHFD (0x00000010) +#define SSI_RCR_RSCKP (0x00000008) +#define SSI_RCR_RFSI (0x00000004) +#define SSI_RCR_RFSL (0x00000002) +#define SSI_RCR_REFS (0x00000001) + +/* Bit definitions and macros for SSI_CCR */ +#define SSI_CCR_DIV2 (0x00040000) +#define SSI_CCR_PSR (0x00020000) +#define SSI_CCR_WL(x) (((x)&0x0000000F)<<13) +#define SSI_CCR_DC(x) (((x)&0x0000001F)<<8) +#define SSI_CCR_PM(x) ((x)&0x000000FF) + +/* Bit definitions and macros for SSI_FCSR */ +#define SSI_FCSR_RFCNT1(x) (((x)&0x0000000F)<<28) +#define SSI_FCSR_TFCNT1(x) (((x)&0x0000000F)<<24) +#define SSI_FCSR_RFWM1(x) (((x)&0x0000000F)<<20) +#define SSI_FCSR_TFWM1(x) (((x)&0x0000000F)<<16) +#define SSI_FCSR_RFCNT0(x) (((x)&0x0000000F)<<12) +#define SSI_FCSR_TFCNT0(x) (((x)&0x0000000F)<<8) +#define SSI_FCSR_RFWM0(x) (((x)&0x0000000F)<<4) +#define SSI_FCSR_TFWM0(x) ((x)&0x0000000F) + +/* Bit definitions and macros for SSI_ACR */ +#define SSI_ACR_FRDIV(x) (((x)&0x0000003F)<<5) +#define SSI_ACR_WR (0x00000010) +#define SSI_ACR_RD (0x00000008) +#define SSI_ACR_TIF (0x00000004) +#define SSI_ACR_FV (0x00000002) +#define SSI_ACR_AC97EN (0x00000001) + +/* Bit definitions and macros for SSI_ACADD */ +#define SSI_ACADD_SSI_ACADD(x) ((x)&0x0007FFFF) + +/* Bit definitions and macros for SSI_ACDAT */ +#define SSI_ACDAT_SSI_ACDAT(x) ((x)&0x0007FFFF) + +/* Bit definitions and macros for SSI_ATAG */ +#define SSI_ATAG_DDI_ATAG(x) ((x)&0x0000FFFF) + +/********************************************************************* +* Phase Locked Loop (PLL) +*********************************************************************/ +/* Bit definitions and macros for PLL_PODR */ +#define PLL_PODR_CPUDIV(x) (((x)&0x0F)<<4) +#define PLL_PODR_BUSDIV(x) ((x)&0x0F) + +/* Bit definitions and macros for PLL_PLLCR */ +#define PLL_PLLCR_DITHEN (0x80) +#define PLL_PLLCR_DITHDEV(x) ((x)&0x07) + +#endif /* mcf5329_h */ diff --git a/include/asm-m68k/mcfrtc.h b/include/asm-m68k/mcfrtc.h new file mode 100644 index 00000000000..70785354fb9 --- /dev/null +++ b/include/asm-m68k/mcfrtc.h @@ -0,0 +1,108 @@ +/* + * RealTime Clock + * + * (C) Copyright 2007 + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __MCFRTC_H__ +#define __MCFRTC_H__ + +/* Real time Clock */ +typedef struct rtc_ctrl { + u32 hourmin; /* 0x00 Hours and Minutes Counter Register */ + u32 seconds; /* 0x04 Seconds Counter Register */ + u32 alrm_hm; /* 0x08 Hours and Minutes Alarm Register */ + u32 alrm_sec; /* 0x0C Seconds Alarm Register */ + u32 cr; /* 0x10 Control Register */ + u32 isr; /* 0x14 Interrupt Status Register */ + u32 ier; /* 0x18 Interrupt Enable Register */ + u32 stpwach; /* 0x1C Stopwatch Minutes Register */ + u32 days; /* 0x20 Days Counter Register */ + u32 alrm_day; /* 0x24 Days Alarm Register */ +} rtc_t; + +/* Bit definitions and macros for HOURMIN */ +#define RTC_HOURMIN_MINUTES(x) (((x)&0x0000003F)) +#define RTC_HOURMIN_HOURS(x) (((x)&0x0000001F)<<8) + +/* Bit definitions and macros for SECONDS */ +#define RTC_SECONDS_SECONDS(x) (((x)&0x0000003F)) + +/* Bit definitions and macros for ALRM_HM */ +#define RTC_ALRM_HM_MINUTES(x) (((x)&0x0000003F)) +#define RTC_ALRM_HM_HOURS(x) (((x)&0x0000001F)<<8) + +/* Bit definitions and macros for ALRM_SEC */ +#define RTC_ALRM_SEC_SECONDS(x) (((x)&0x0000003F)) + +/* Bit definitions and macros for CR */ +#define RTC_CR_SWR (0x00000001) +#define RTC_CR_XTL(x) (((x)&0x00000003)<<5) +#define RTC_CR_EN (0x00000080) +#define RTC_CR_32768 (0x0) +#define RTC_CR_32000 (0x1) +#define RTC_CR_38400 (0x2) + +/* Bit definitions and macros for ISR */ +#define RTC_ISR_SW (0x00000001) +#define RTC_ISR_MIN (0x00000002) +#define RTC_ISR_ALM (0x00000004) +#define RTC_ISR_DAY (0x00000008) +#define RTC_ISR_1HZ (0x00000010) +#define RTC_ISR_HR (0x00000020) +#define RTC_ISR_2HZ (0x00000080) +#define RTC_ISR_SAM0 (0x00000100) +#define RTC_ISR_SAM1 (0x00000200) +#define RTC_ISR_SAM2 (0x00000400) +#define RTC_ISR_SAM3 (0x00000800) +#define RTC_ISR_SAM4 (0x00001000) +#define RTC_ISR_SAM5 (0x00002000) +#define RTC_ISR_SAM6 (0x00004000) +#define RTC_ISR_SAM7 (0x00008000) + +/* Bit definitions and macros for IER */ +#define RTC_IER_SW (0x00000001) +#define RTC_IER_MIN (0x00000002) +#define RTC_IER_ALM (0x00000004) +#define RTC_IER_DAY (0x00000008) +#define RTC_IER_1HZ (0x00000010) +#define RTC_IER_HR (0x00000020) +#define RTC_IER_2HZ (0x00000080) +#define RTC_IER_SAM0 (0x00000100) +#define RTC_IER_SAM1 (0x00000200) +#define RTC_IER_SAM2 (0x00000400) +#define RTC_IER_SAM3 (0x00000800) +#define RTC_IER_SAM4 (0x00001000) +#define RTC_IER_SAM5 (0x00002000) +#define RTC_IER_SAM6 (0x00004000) +#define RTC_IER_SAM7 (0x00008000) + +/* Bit definitions and macros for STPWCH */ +#define RTC_STPWCH_CNT(x) (((x)&0x0000003F)) + +/* Bit definitions and macros for DAYS */ +#define RTC_DAYS_DAYS(x) (((x)&0x0000FFFF)) + +/* Bit definitions and macros for ALRM_DAY */ +#define RTC_ALRM_DAY_DAYS(x) (((x)&0x0000FFFF)) + +#endif /* __MCFRTC_H__ */ diff --git a/include/asm-m68k/mcftimer.h b/include/asm-m68k/mcftimer.h index a73b80eaf81..988860d07f5 100644 --- a/include/asm-m68k/mcftimer.h +++ b/include/asm-m68k/mcftimer.h @@ -35,32 +35,31 @@ * Get address specific defines for this ColdFire member. */ #if defined(CONFIG_M5204) || defined(CONFIG_M5206) || defined(CONFIG_M5206e) -#define MCFTIMER_BASE1 0x100 /* Base address of TIMER1 */ -#define MCFTIMER_BASE2 0x120 /* Base address of TIMER2 */ +#define MCFTIMER_BASE1 0x100 /* Base address of TIMER1 */ +#define MCFTIMER_BASE2 0x120 /* Base address of TIMER2 */ #elif defined(CONFIG_M5272) -#define MCFTIMER_BASE1 0x200 /* Base address of TIMER1 */ -#define MCFTIMER_BASE2 0x220 /* Base address of TIMER2 */ -#define MCFTIMER_BASE3 0x240 /* Base address of TIMER4 */ -#define MCFTIMER_BASE4 0x260 /* Base address of TIMER3 */ +#define MCFTIMER_BASE1 0x200 /* Base address of TIMER1 */ +#define MCFTIMER_BASE2 0x220 /* Base address of TIMER2 */ +#define MCFTIMER_BASE3 0x240 /* Base address of TIMER4 */ +#define MCFTIMER_BASE4 0x260 /* Base address of TIMER3 */ #elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) -#define MCFTIMER_BASE1 0x140 /* Base address of TIMER1 */ -#define MCFTIMER_BASE2 0x180 /* Base address of TIMER2 */ +#define MCFTIMER_BASE1 0x140 /* Base address of TIMER1 */ +#define MCFTIMER_BASE2 0x180 /* Base address of TIMER2 */ #elif defined(CONFIG_M5282) | defined(CONFIG_M5271) -#define MCFTIMER_BASE1 0x150000 /* Base address of TIMER1 */ -#define MCFTIMER_BASE2 0x160000 /* Base address of TIMER2 */ -#define MCFTIMER_BASE3 0x170000 /* Base address of TIMER4 */ +#define MCFTIMER_BASE1 0x150000 /* Base address of TIMER1 */ +#define MCFTIMER_BASE2 0x160000 /* Base address of TIMER2 */ +#define MCFTIMER_BASE3 0x170000 /* Base address of TIMER4 */ #define MCFTIMER_BASE4 0x180000 /* Base address of TIMER3 */ #endif /* * Define the TIMER register set addresses. */ -#define MCFTIMER_TMR 0x00 /* Timer Mode reg (r/w) */ -#define MCFTIMER_TRR 0x02 /* Timer Reference (r/w) */ -#define MCFTIMER_TCR 0x04 /* Timer Capture reg (r/w) */ -#define MCFTIMER_TCN 0x06 /* Timer Counter reg (r/w) */ -#define MCFTIMER_TER 0x11 /* Timer Event reg (r/w) */ - +#define MCFTIMER_TMR 0x00 /* Timer Mode reg (r/w) */ +#define MCFTIMER_TRR 0x02 /* Timer Reference (r/w) */ +#define MCFTIMER_TCR 0x04 /* Timer Capture reg (r/w) */ +#define MCFTIMER_TCN 0x06 /* Timer Counter reg (r/w) */ +#define MCFTIMER_TER 0x11 /* Timer Event reg (r/w) */ /* * Define the TIMER register set addresses for 5282. @@ -73,29 +72,29 @@ * Bit definitions for the Timer Mode Register (TMR). * Register bit flags are common accross ColdFires. */ -#define MCFTIMER_TMR_PREMASK 0xff00 /* Prescalar mask */ -#define MCFTIMER_TMR_DISCE 0x0000 /* Disable capture */ -#define MCFTIMER_TMR_ANYCE 0x00c0 /* Capture any edge */ -#define MCFTIMER_TMR_FALLCE 0x0080 /* Capture fallingedge */ -#define MCFTIMER_TMR_RISECE 0x0040 /* Capture rising edge */ -#define MCFTIMER_TMR_ENOM 0x0020 /* Enable output toggle */ -#define MCFTIMER_TMR_DISOM 0x0000 /* Do single output pulse */ -#define MCFTIMER_TMR_ENORI 0x0010 /* Enable ref interrupt */ -#define MCFTIMER_TMR_DISORI 0x0000 /* Disable ref interrupt */ -#define MCFTIMER_TMR_RESTART 0x0008 /* Restart counter */ -#define MCFTIMER_TMR_FREERUN 0x0000 /* Free running counter */ -#define MCFTIMER_TMR_CLKTIN 0x0006 /* Input clock is TIN */ -#define MCFTIMER_TMR_CLK16 0x0004 /* Input clock is /16 */ -#define MCFTIMER_TMR_CLK1 0x0002 /* Input clock is /1 */ -#define MCFTIMER_TMR_CLKSTOP 0x0000 /* Stop counter */ -#define MCFTIMER_TMR_ENABLE 0x0001 /* Enable timer */ -#define MCFTIMER_TMR_DISABLE 0x0000 /* Disable timer */ +#define MCFTIMER_TMR_PREMASK 0xff00 /* Prescalar mask */ +#define MCFTIMER_TMR_DISCE 0x0000 /* Disable capture */ +#define MCFTIMER_TMR_ANYCE 0x00c0 /* Capture any edge */ +#define MCFTIMER_TMR_FALLCE 0x0080 /* Capture fallingedge */ +#define MCFTIMER_TMR_RISECE 0x0040 /* Capture rising edge */ +#define MCFTIMER_TMR_ENOM 0x0020 /* Enable output toggle */ +#define MCFTIMER_TMR_DISOM 0x0000 /* Do single output pulse */ +#define MCFTIMER_TMR_ENORI 0x0010 /* Enable ref interrupt */ +#define MCFTIMER_TMR_DISORI 0x0000 /* Disable ref interrupt */ +#define MCFTIMER_TMR_RESTART 0x0008 /* Restart counter */ +#define MCFTIMER_TMR_FREERUN 0x0000 /* Free running counter */ +#define MCFTIMER_TMR_CLKTIN 0x0006 /* Input clock is TIN */ +#define MCFTIMER_TMR_CLK16 0x0004 /* Input clock is /16 */ +#define MCFTIMER_TMR_CLK1 0x0002 /* Input clock is /1 */ +#define MCFTIMER_TMR_CLKSTOP 0x0000 /* Stop counter */ +#define MCFTIMER_TMR_ENABLE 0x0001 /* Enable timer */ +#define MCFTIMER_TMR_DISABLE 0x0000 /* Disable timer */ /* * Bit definitions for the Timer Event Registers (TER). */ -#define MCFTIMER_TER_CAP 0x01 /* Capture event */ -#define MCFTIMER_TER_REF 0x02 /* Refernece event */ +#define MCFTIMER_TER_CAP 0x01 /* Capture event */ +#define MCFTIMER_TER_REF 0x02 /* Refernece event */ /* * Bit definitions for the 5282 PIT Control and Status Register (PCSR). @@ -108,6 +107,77 @@ #define MCFTIMER_PCSR_HALTED 0x0020 #define MCFTIMER_PCSR_DOZE 0x0040 +/****************************************************************************/ +/* New Timer structure */ +/****************************************************************************/ +/* DMA Timer module registers */ +typedef struct dtimer_ctrl { + u16 tmr; /* 0x00 Mode register */ + u8 txmr; /* 0x02 Extended Mode register */ + u8 ter; /* 0x03 Event register */ + u32 trr; /* 0x04 Reference register */ + u32 tcr; /* 0x08 Capture register */ + u32 tcn; /* 0x0C Counter register */ +} dtmr_t; + +/*Programmable Interrupt Timer */ +typedef struct pit_ctrl { + u16 pcsr; /* 0x00 Control and Status Register */ + u16 pmr; /* 0x02 Modulus Register */ + u16 pcntr; /* 0x04 Count Register */ +} pit_t; + +/********************************************************************* +* DMA Timers (DTIM) +*********************************************************************/ +/* Bit definitions and macros for DTMR */ +#define DTIM_DTMR_RST (0x0001) /* Reset */ +#define DTIM_DTMR_CLK(x) (((x)&0x0003)<<1) /* Input clock source */ +#define DTIM_DTMR_FRR (0x0008) /* Free run/restart */ +#define DTIM_DTMR_ORRI (0x0010) /* Output reference request/interrupt enable */ +#define DTIM_DTMR_OM (0x0020) /* Output Mode */ +#define DTIM_DTMR_CE(x) (((x)&0x0003)<<6) /* Capture Edge */ +#define DTIM_DTMR_PS(x) (((x)&0x00FF)<<8) /* Prescaler value */ +#define DTIM_DTMR_RST_EN (0x0001) +#define DTIM_DTMR_RST_RST (0x0000) +#define DTIM_DTMR_CE_ANY (0x00C0) +#define DTIM_DTMR_CE_FALL (0x0080) +#define DTIM_DTMR_CE_RISE (0x0040) +#define DTIM_DTMR_CE_NONE (0x0000) +#define DTIM_DTMR_CLK_DTIN (0x0006) +#define DTIM_DTMR_CLK_DIV16 (0x0004) +#define DTIM_DTMR_CLK_DIV1 (0x0002) +#define DTIM_DTMR_CLK_STOP (0x0000) + +/* Bit definitions and macros for DTXMR */ +#define DTIM_DTXMR_MODE16 (0x01) /* Increment Mode */ +#define DTIM_DTXMR_DMAEN (0x80) /* DMA request */ + +/* Bit definitions and macros for DTER */ +#define DTIM_DTER_CAP (0x01) /* Capture event */ +#define DTIM_DTER_REF (0x02) /* Output reference event */ + +/********************************************************************* +* +* Programmable Interrupt Timer Modules (PIT) +* +*********************************************************************/ + +/* Bit definitions and macros for PCSR */ +#define PIT_PCSR_EN (0x0001) +#define PIT_PCSR_RLD (0x0002) +#define PIT_PCSR_PIF (0x0004) +#define PIT_PCSR_PIE (0x0008) +#define PIT_PCSR_OVW (0x0010) +#define PIT_PCSR_HALTED (0x0020) +#define PIT_PCSR_DOZE (0x0040) +#define PIT_PCSR_PRE(x) (((x)&0x000F)<<8) + +/* Bit definitions and macros for PMR */ +#define PIT_PMR_PM(x) (x) + +/* Bit definitions and macros for PCNTR */ +#define PIT_PCNTR_PC(x) (x) /****************************************************************************/ -#endif /* mcftimer_h */ +#endif /* mcftimer_h */ diff --git a/include/asm-m68k/mcfuart.h b/include/asm-m68k/mcfuart.h index 7c0999d61d8..43b49a87c6c 100644 --- a/include/asm-m68k/mcfuart.h +++ b/include/asm-m68k/mcfuart.h @@ -36,106 +36,105 @@ * space. */ #if defined(CONFIG_M5272) -#define MCFUART_BASE1 0x100 /* Base address of UART1 */ -#define MCFUART_BASE2 0x140 /* Base address of UART2 */ +#define MCFUART_BASE1 0x100 /* Base address of UART1 */ +#define MCFUART_BASE2 0x140 /* Base address of UART2 */ #elif defined(CONFIG_M5204) || defined(CONFIG_M5206) || defined(CONFIG_M5206e) #if defined(CONFIG_NETtel) -#define MCFUART_BASE1 0x180 /* Base address of UART1 */ -#define MCFUART_BASE2 0x140 /* Base address of UART2 */ +#define MCFUART_BASE1 0x180 /* Base address of UART1 */ +#define MCFUART_BASE2 0x140 /* Base address of UART2 */ #else -#define MCFUART_BASE1 0x140 /* Base address of UART1 */ -#define MCFUART_BASE2 0x180 /* Base address of UART2 */ +#define MCFUART_BASE1 0x140 /* Base address of UART1 */ +#define MCFUART_BASE2 0x180 /* Base address of UART2 */ #endif #elif defined(CONFIG_M5282) || defined(CONFIG_M5271) -#define MCFUART_BASE1 0x200 /* Base address of UART1 */ -#define MCFUART_BASE2 0x240 /* Base address of UART2 */ -#define MCFUART_BASE3 0x280 /* Base address of UART3 */ +#define MCFUART_BASE1 0x200 /* Base address of UART1 */ +#define MCFUART_BASE2 0x240 /* Base address of UART2 */ +#define MCFUART_BASE3 0x280 /* Base address of UART3 */ #elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) #if defined(CONFIG_NETtel) || defined(CONFIG_DISKtel) || defined(CONFIG_SECUREEDGEMP3) -#define MCFUART_BASE1 0x200 /* Base address of UART1 */ -#define MCFUART_BASE2 0x1c0 /* Base address of UART2 */ +#define MCFUART_BASE1 0x200 /* Base address of UART1 */ +#define MCFUART_BASE2 0x1c0 /* Base address of UART2 */ #else -#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */ -#define MCFUART_BASE2 0x200 /* Base address of UART2 */ +#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */ +#define MCFUART_BASE2 0x200 /* Base address of UART2 */ #endif #endif - /* * Define the ColdFire UART register set addresses. */ -#define MCFUART_UMR 0x00 /* Mode register (r/w) */ -#define MCFUART_USR 0x04 /* Status register (r) */ -#define MCFUART_UCSR 0x04 /* Clock Select (w) */ -#define MCFUART_UCR 0x08 /* Command register (w) */ -#define MCFUART_URB 0x0c /* Receiver Buffer (r) */ -#define MCFUART_UTB 0x0c /* Transmit Buffer (w) */ -#define MCFUART_UIPCR 0x10 /* Input Port Change (r) */ -#define MCFUART_UACR 0x10 /* Auxiliary Control (w) */ -#define MCFUART_UISR 0x14 /* Interrup Status (r) */ -#define MCFUART_UIMR 0x14 /* Interrupt Mask (w) */ -#define MCFUART_UBG1 0x18 /* Baud Rate MSB (r/w) */ -#define MCFUART_UBG2 0x1c /* Baud Rate LSB (r/w) */ +#define MCFUART_UMR 0x00 /* Mode register (r/w) */ +#define MCFUART_USR 0x04 /* Status register (r) */ +#define MCFUART_UCSR 0x04 /* Clock Select (w) */ +#define MCFUART_UCR 0x08 /* Command register (w) */ +#define MCFUART_URB 0x0c /* Receiver Buffer (r) */ +#define MCFUART_UTB 0x0c /* Transmit Buffer (w) */ +#define MCFUART_UIPCR 0x10 /* Input Port Change (r) */ +#define MCFUART_UACR 0x10 /* Auxiliary Control (w) */ +#define MCFUART_UISR 0x14 /* Interrup Status (r) */ +#define MCFUART_UIMR 0x14 /* Interrupt Mask (w) */ +#define MCFUART_UBG1 0x18 /* Baud Rate MSB (r/w) */ +#define MCFUART_UBG2 0x1c /* Baud Rate LSB (r/w) */ #ifdef CONFIG_M5272 -#define MCFUART_UTF 0x28 /* Transmitter FIFO (r/w) */ -#define MCFUART_URF 0x2c /* Receiver FIFO (r/w) */ -#define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */ +#define MCFUART_UTF 0x28 /* Transmitter FIFO (r/w) */ +#define MCFUART_URF 0x2c /* Receiver FIFO (r/w) */ +#define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */ #else -#define MCFUART_UIVR 0x30 /* Interrupt Vector (r/w) */ +#define MCFUART_UIVR 0x30 /* Interrupt Vector (r/w) */ #endif -#define MCFUART_UIPR 0x34 /* Input Port (r) */ -#define MCFUART_UOP1 0x38 /* Output Port Bit Set (w) */ -#define MCFUART_UOP0 0x3c /* Output Port Bit Reset (w) */ +#define MCFUART_UIPR 0x34 /* Input Port (r) */ +#define MCFUART_UOP1 0x38 /* Output Port Bit Set (w) */ +#define MCFUART_UOP0 0x3c /* Output Port Bit Reset (w) */ #ifdef CONFIG_M5249 /* Note: This isn't in the 5249 docs */ -#define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */ +#define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */ #endif /* * Define bit flags in Mode Register 1 (MR1). */ -#define MCFUART_MR1_RXRTS 0x80 /* Auto RTS flow control */ -#define MCFUART_MR1_RXIRQFULL 0x40 /* RX IRQ type FULL */ -#define MCFUART_MR1_RXIRQRDY 0x00 /* RX IRQ type RDY */ -#define MCFUART_MR1_RXERRBLOCK 0x20 /* RX block error mode */ -#define MCFUART_MR1_RXERRCHAR 0x00 /* RX char error mode */ - -#define MCFUART_MR1_PARITYNONE 0x10 /* No parity */ -#define MCFUART_MR1_PARITYEVEN 0x00 /* Even parity */ -#define MCFUART_MR1_PARITYODD 0x04 /* Odd parity */ -#define MCFUART_MR1_PARITYSPACE 0x08 /* Space parity */ -#define MCFUART_MR1_PARITYMARK 0x0c /* Mark parity */ - -#define MCFUART_MR1_CS5 0x00 /* 5 bits per char */ -#define MCFUART_MR1_CS6 0x01 /* 6 bits per char */ -#define MCFUART_MR1_CS7 0x02 /* 7 bits per char */ -#define MCFUART_MR1_CS8 0x03 /* 8 bits per char */ +#define MCFUART_MR1_RXRTS 0x80 /* Auto RTS flow control */ +#define MCFUART_MR1_RXIRQFULL 0x40 /* RX IRQ type FULL */ +#define MCFUART_MR1_RXIRQRDY 0x00 /* RX IRQ type RDY */ +#define MCFUART_MR1_RXERRBLOCK 0x20 /* RX block error mode */ +#define MCFUART_MR1_RXERRCHAR 0x00 /* RX char error mode */ + +#define MCFUART_MR1_PARITYNONE 0x10 /* No parity */ +#define MCFUART_MR1_PARITYEVEN 0x00 /* Even parity */ +#define MCFUART_MR1_PARITYODD 0x04 /* Odd parity */ +#define MCFUART_MR1_PARITYSPACE 0x08 /* Space parity */ +#define MCFUART_MR1_PARITYMARK 0x0c /* Mark parity */ + +#define MCFUART_MR1_CS5 0x00 /* 5 bits per char */ +#define MCFUART_MR1_CS6 0x01 /* 6 bits per char */ +#define MCFUART_MR1_CS7 0x02 /* 7 bits per char */ +#define MCFUART_MR1_CS8 0x03 /* 8 bits per char */ /* * Define bit flags in Mode Register 2 (MR2). */ -#define MCFUART_MR2_LOOPBACK 0x80 /* Loopback mode */ -#define MCFUART_MR2_REMOTELOOP 0xc0 /* Remote loopback mode */ -#define MCFUART_MR2_AUTOECHO 0x40 /* Automatic echo */ -#define MCFUART_MR2_TXRTS 0x20 /* Assert RTS on TX */ -#define MCFUART_MR2_TXCTS 0x10 /* Auto CTS flow control */ +#define MCFUART_MR2_LOOPBACK 0x80 /* Loopback mode */ +#define MCFUART_MR2_REMOTELOOP 0xc0 /* Remote loopback mode */ +#define MCFUART_MR2_AUTOECHO 0x40 /* Automatic echo */ +#define MCFUART_MR2_TXRTS 0x20 /* Assert RTS on TX */ +#define MCFUART_MR2_TXCTS 0x10 /* Auto CTS flow control */ -#define MCFUART_MR2_STOP1 0x07 /* 1 stop bit */ -#define MCFUART_MR2_STOP15 0x08 /* 1.5 stop bits */ -#define MCFUART_MR2_STOP2 0x0f /* 2 stop bits */ +#define MCFUART_MR2_STOP1 0x07 /* 1 stop bit */ +#define MCFUART_MR2_STOP15 0x08 /* 1.5 stop bits */ +#define MCFUART_MR2_STOP2 0x0f /* 2 stop bits */ /* * Define bit flags in Status Register (USR). */ -#define MCFUART_USR_RXBREAK 0x80 /* Received BREAK */ -#define MCFUART_USR_RXFRAMING 0x40 /* Received framing error */ -#define MCFUART_USR_RXPARITY 0x20 /* Received parity error */ -#define MCFUART_USR_RXOVERRUN 0x10 /* Received overrun error */ -#define MCFUART_USR_TXEMPTY 0x08 /* Transmitter empty */ -#define MCFUART_USR_TXREADY 0x04 /* Transmitter ready */ -#define MCFUART_USR_RXFULL 0x02 /* Receiver full */ -#define MCFUART_USR_RXREADY 0x01 /* Receiver ready */ +#define MCFUART_USR_RXBREAK 0x80 /* Received BREAK */ +#define MCFUART_USR_RXFRAMING 0x40 /* Received framing error */ +#define MCFUART_USR_RXPARITY 0x20 /* Received parity error */ +#define MCFUART_USR_RXOVERRUN 0x10 /* Received overrun error */ +#define MCFUART_USR_TXEMPTY 0x08 /* Transmitter empty */ +#define MCFUART_USR_TXREADY 0x04 /* Transmitter ready */ +#define MCFUART_USR_RXFULL 0x02 /* Receiver full */ +#define MCFUART_USR_RXREADY 0x01 /* Receiver ready */ #define MCFUART_USR_RXERR (MCFUART_USR_RXBREAK | MCFUART_USR_RXFRAMING | \ MCFUART_USR_RXPARITY | MCFUART_USR_RXOVERRUN) @@ -143,13 +142,13 @@ /* * Define bit flags in Clock Select Register (UCSR). */ -#define MCFUART_UCSR_RXCLKTIMER 0xd0 /* RX clock is timer */ -#define MCFUART_UCSR_RXCLKEXT16 0xe0 /* RX clock is external x16 */ -#define MCFUART_UCSR_RXCLKEXT1 0xf0 /* RX clock is external x1 */ +#define MCFUART_UCSR_RXCLKTIMER 0xd0 /* RX clock is timer */ +#define MCFUART_UCSR_RXCLKEXT16 0xe0 /* RX clock is external x16 */ +#define MCFUART_UCSR_RXCLKEXT1 0xf0 /* RX clock is external x1 */ -#define MCFUART_UCSR_TXCLKTIMER 0x0d /* TX clock is timer */ -#define MCFUART_UCSR_TXCLKEXT16 0x0e /* TX clock is external x16 */ -#define MCFUART_UCSR_TXCLKEXT1 0x0f /* TX clock is external x1 */ +#define MCFUART_UCSR_TXCLKTIMER 0x0d /* TX clock is timer */ +#define MCFUART_UCSR_TXCLKEXT16 0x0e /* TX clock is external x16 */ +#define MCFUART_UCSR_TXCLKEXT1 0x0f /* TX clock is external x1 */ /* * Define bit flags in Command Register (UCR). @@ -163,59 +162,200 @@ #define MCFUART_UCR_CMDBREAKSTART 0x60 /* Start BREAK */ #define MCFUART_UCR_CMDBREAKSTOP 0x70 /* Stop BREAK */ -#define MCFUART_UCR_TXNULL 0x00 /* No TX command */ -#define MCFUART_UCR_TXENABLE 0x04 /* Enable TX */ -#define MCFUART_UCR_TXDISABLE 0x08 /* Disable TX */ -#define MCFUART_UCR_RXNULL 0x00 /* No RX command */ -#define MCFUART_UCR_RXENABLE 0x01 /* Enable RX */ -#define MCFUART_UCR_RXDISABLE 0x02 /* Disable RX */ +#define MCFUART_UCR_TXNULL 0x00 /* No TX command */ +#define MCFUART_UCR_TXENABLE 0x04 /* Enable TX */ +#define MCFUART_UCR_TXDISABLE 0x08 /* Disable TX */ +#define MCFUART_UCR_RXNULL 0x00 /* No RX command */ +#define MCFUART_UCR_RXENABLE 0x01 /* Enable RX */ +#define MCFUART_UCR_RXDISABLE 0x02 /* Disable RX */ /* * Define bit flags in Input Port Change Register (UIPCR). */ -#define MCFUART_UIPCR_CTSCOS 0x10 /* CTS change of state */ -#define MCFUART_UIPCR_CTS 0x01 /* CTS value */ +#define MCFUART_UIPCR_CTSCOS 0x10 /* CTS change of state */ +#define MCFUART_UIPCR_CTS 0x01 /* CTS value */ /* * Define bit flags in Input Port Register (UIP). */ -#define MCFUART_UIPR_CTS 0x01 /* CTS value */ +#define MCFUART_UIPR_CTS 0x01 /* CTS value */ /* * Define bit flags in Output Port Registers (UOP). * Clear bit by writing to UOP0, set by writing to UOP1. */ -#define MCFUART_UOP_RTS 0x01 /* RTS set or clear */ +#define MCFUART_UOP_RTS 0x01 /* RTS set or clear */ /* * Define bit flags in the Auxiliary Control Register (UACR). */ -#define MCFUART_UACR_IEC 0x01 /* Input enable control */ +#define MCFUART_UACR_IEC 0x01 /* Input enable control */ /* * Define bit flags in Interrupt Status Register (UISR). * These same bits are used for the Interrupt Mask Register (UIMR). */ -#define MCFUART_UIR_COS 0x80 /* Change of state (CTS) */ -#define MCFUART_UIR_DELTABREAK 0x04 /* Break start or stop */ -#define MCFUART_UIR_RXREADY 0x02 /* Receiver ready */ -#define MCFUART_UIR_TXREADY 0x01 /* Transmitter ready */ +#define MCFUART_UIR_COS 0x80 /* Change of state (CTS) */ +#define MCFUART_UIR_DELTABREAK 0x04 /* Break start or stop */ +#define MCFUART_UIR_RXREADY 0x02 /* Receiver ready */ +#define MCFUART_UIR_TXREADY 0x01 /* Transmitter ready */ #ifdef CONFIG_M5272 /* * Define bit flags in the Transmitter FIFO Register (UTF). */ -#define MCFUART_UTF_TXB 0x1f /* transmitter data level */ -#define MCFUART_UTF_FULL 0x20 /* transmitter fifo full */ -#define MCFUART_UTF_TXS 0xc0 /* transmitter status */ +#define MCFUART_UTF_TXB 0x1f /* transmitter data level */ +#define MCFUART_UTF_FULL 0x20 /* transmitter fifo full */ +#define MCFUART_UTF_TXS 0xc0 /* transmitter status */ /* * Define bit flags in the Receiver FIFO Register (URF). */ -#define MCFUART_URF_RXB 0x1f /* receiver data level */ -#define MCFUART_URF_FULL 0x20 /* receiver fifo full */ -#define MCFUART_URF_RXS 0xc0 /* receiver status */ +#define MCFUART_URF_RXB 0x1f /* receiver data level */ +#define MCFUART_URF_FULL 0x20 /* receiver fifo full */ +#define MCFUART_URF_RXS 0xc0 /* receiver status */ #endif +#ifdef CONFIG_MCFUART +/* UART module registers */ +/* Register read/write struct */ +typedef struct uart { + u8 umr; /* 0x00 Mode Register */ + u8 resv0[0x3]; + union { + u8 usr; /* 0x04 Status Register */ + u8 ucsr; /* 0x04 Clock Select Register */ + }; + u8 resv1[0x3]; + u8 ucr; /* 0x08 Command Register */ + u8 resv2[0x3]; + union { + u8 utb; /* 0x0c Transmit Buffer */ + u8 urb; /* 0x0c Receive Buffer */ + }; + u8 resv3[0x3]; + union { + u8 uipcr; /* 0x10 Input Port Change Register */ + u8 uacr; /* 0x10 Auxiliary Control reg */ + }; + u8 resv4[0x3]; + union { + u8 uimr; /* 0x14 Interrupt Mask reg */ + u8 uisr; /* 0x14 Interrupt Status reg */ + }; + u8 resv5[0x3]; + u8 ubg1; /* 0x18 Counter Timer Upper Register */ + u8 resv6[0x3]; + u8 ubg2; /* 0x1c Counter Timer Lower Register */ + u8 resv7[0x17]; + u8 uip; /* 0x34 Input Port Register */ + u8 resv8[0x3]; + u8 uop1; /* 0x38 Output Port Set Register */ + u8 resv9[0x3]; + u8 uop0; /* 0x3c Output Port Reset Register */ +} uart_t; + +/********************************************************************* +* Universal Asynchronous Receiver Transmitter (UART) +*********************************************************************/ +/* Bit definitions and macros for UMR */ +#define UART_UMR_BC(x) (((x)&0x03)) +#define UART_UMR_PT (0x04) +#define UART_UMR_PM(x) (((x)&0x03)<<3) +#define UART_UMR_ERR (0x20) +#define UART_UMR_RXIRQ (0x40) +#define UART_UMR_RXRTS (0x80) +#define UART_UMR_SB(x) (((x)&0x0F)) +#define UART_UMR_TXCTS (0x10) /* Trsnsmit CTS */ +#define UART_UMR_TXRTS (0x20) /* Transmit RTS */ +#define UART_UMR_CM(x) (((x)&0x03)<<6) /* CM bits */ +#define UART_UMR_PM_MULTI_ADDR (0x1C) +#define UART_UMR_PM_MULTI_DATA (0x18) +#define UART_UMR_PM_NONE (0x10) +#define UART_UMR_PM_FORCE_HI (0x0C) +#define UART_UMR_PM_FORCE_LO (0x08) +#define UART_UMR_PM_ODD (0x04) +#define UART_UMR_PM_EVEN (0x00) +#define UART_UMR_BC_5 (0x00) +#define UART_UMR_BC_6 (0x01) +#define UART_UMR_BC_7 (0x02) +#define UART_UMR_BC_8 (0x03) +#define UART_UMR_CM_NORMAL (0x00) +#define UART_UMR_CM_ECH (0x40) +#define UART_UMR_CM_LOCAL_LOOP (0x80) +#define UART_UMR_CM_REMOTE_LOOP (0xC0) +#define UART_UMR_SB_STOP_BITS_1 (0x07) +#define UART_UMR_SB_STOP_BITS_15 (0x08) +#define UART_UMR_SB_STOP_BITS_2 (0x0F) + +/* Bit definitions and macros for USR */ +#define UART_USR_RXRDY (0x01) +#define UART_USR_FFULL (0x02) +#define UART_USR_TXRDY (0x04) +#define UART_USR_TXEMP (0x08) +#define UART_USR_OE (0x10) +#define UART_USR_PE (0x20) +#define UART_USR_FE (0x40) +#define UART_USR_RB (0x80) + +/* Bit definitions and macros for UCSR */ +#define UART_UCSR_TCS(x) (((x)&0x0F)) +#define UART_UCSR_RCS(x) (((x)&0x0F)<<4) +#define UART_UCSR_RCS_SYS_CLK (0xD0) +#define UART_UCSR_RCS_CTM16 (0xE0) +#define UART_UCSR_RCS_CTM (0xF0) +#define UART_UCSR_TCS_SYS_CLK (0x0D) +#define UART_UCSR_TCS_CTM16 (0x0E) +#define UART_UCSR_TCS_CTM (0x0F) + +/* Bit definitions and macros for UCR */ +#define UART_UCR_RXC(x) (((x)&0x03)) +#define UART_UCR_TXC(x) (((x)&0x03)<<2) +#define UART_UCR_MISC(x) (((x)&0x07)<<4) +#define UART_UCR_NONE (0x00) +#define UART_UCR_STOP_BREAK (0x70) +#define UART_UCR_START_BREAK (0x60) +#define UART_UCR_BKCHGINT (0x50) +#define UART_UCR_RESET_ERROR (0x40) +#define UART_UCR_RESET_TX (0x30) +#define UART_UCR_RESET_RX (0x20) +#define UART_UCR_RESET_MR (0x10) +#define UART_UCR_TX_DISABLED (0x08) +#define UART_UCR_TX_ENABLED (0x04) +#define UART_UCR_RX_DISABLED (0x02) +#define UART_UCR_RX_ENABLED (0x01) + +/* Bit definitions and macros for UIPCR */ +#define UART_UIPCR_CTS (0x01) +#define UART_UIPCR_COS (0x10) + +/* Bit definitions and macros for UACR */ +#define UART_UACR_IEC (0x01) + +/* Bit definitions and macros for UIMR */ +#define UART_UIMR_TXRDY (0x01) +#define UART_UIMR_RXRDY_FU (0x02) +#define UART_UIMR_DB (0x04) +#define UART_UIMR_COS (0x80) + +/* Bit definitions and macros for UISR */ +#define UART_UISR_TXRDY (0x01) +#define UART_UISR_RXRDY_FU (0x02) +#define UART_UISR_DB (0x04) +#define UART_UISR_RXFTO (0x08) +#define UART_UISR_TXFIFO (0x10) +#define UART_UISR_RXFIFO (0x20) +#define UART_UISR_COS (0x80) + +/* Bit definitions and macros for UIP */ +#define UART_UIP_CTS (0x01) + +/* Bit definitions and macros for UOP1 */ +#define UART_UOP1_RTS (0x01) + +/* Bit definitions and macros for UOP0 */ +#define UART_UOP0_RTS (0x01) +#endif /* CONFIG_MCFUART */ + /****************************************************************************/ -#endif /* mcfuart_h */ +#endif /* mcfuart_h */ diff --git a/include/asm-m68k/ptrace.h b/include/asm-m68k/ptrace.h index 75b241883f3..01535beb15d 100644 --- a/include/asm-m68k/ptrace.h +++ b/include/asm-m68k/ptrace.h @@ -28,32 +28,32 @@ #ifndef __ASSEMBLY__ struct pt_regs { - ulong d0; - ulong d1; - ulong d2; - ulong d3; - ulong d4; - ulong d5; - ulong d6; - ulong d7; - ulong a0; - ulong a1; - ulong a2; - ulong a3; - ulong a4; - ulong a5; - ulong a6; -#if defined(CONFIG_M5272) || defined(CONFIG_M5282) || defined(CONFIG_M5249) || defined(CONFIG_M5271) - unsigned format : 4; /* frame format specifier */ - unsigned vector : 12; /* vector offset */ + ulong d0; + ulong d1; + ulong d2; + ulong d3; + ulong d4; + ulong d5; + ulong d6; + ulong d7; + ulong a0; + ulong a1; + ulong a2; + ulong a3; + ulong a4; + ulong a5; + ulong a6; +#if defined(__M68K__) + unsigned format:4; /* frame format specifier */ + unsigned vector:12; /* vector offset */ unsigned short sr; - unsigned long pc; + unsigned long pc; #else unsigned short sr; - unsigned long pc; + unsigned long pc; #endif }; -#endif /* #ifndef __ASSEMBLY__ */ +#endif /* #ifndef __ASSEMBLY__ */ -#endif /* #ifndef _M68K_PTRACE_H */ +#endif /* #ifndef _M68K_PTRACE_H */ diff --git a/include/asm-m68k/u-boot.h b/include/asm-m68k/u-boot.h index 7a6a8c1ff1b..70dbda464c0 100644 --- a/include/asm-m68k/u-boot.h +++ b/include/asm-m68k/u-boot.h @@ -37,24 +37,36 @@ #ifndef __ASSEMBLY__ typedef struct bd_info { - unsigned long bi_memstart; /* start of DRAM memory */ - unsigned long bi_memsize; /* size of DRAM memory in bytes */ - unsigned long bi_flashstart; /* start of FLASH memory */ - unsigned long bi_flashsize; /* size of FLASH memory */ - unsigned long bi_flashoffset; /* reserved area for startup monitor */ - unsigned long bi_sramstart; /* start of SRAM memory */ - unsigned long bi_sramsize; /* size of SRAM memory */ - unsigned long bi_mbar_base; /* base of internal registers */ - unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */ - unsigned long bi_boot_params; /* where this board expects params */ - unsigned long bi_ip_addr; /* IP Address */ - unsigned char bi_enetaddr[6]; /* Ethernet adress */ - unsigned short bi_ethspeed; /* Ethernet speed in Mbps */ - unsigned long bi_intfreq; /* Internal Freq, in MHz */ - unsigned long bi_busfreq; /* Bus Freq, in MHz */ - unsigned long bi_baudrate; /* Console Baudrate */ + unsigned long bi_memstart; /* start of DRAM memory */ + unsigned long bi_memsize; /* size of DRAM memory in bytes */ + unsigned long bi_flashstart; /* start of FLASH memory */ + unsigned long bi_flashsize; /* size of FLASH memory */ + unsigned long bi_flashoffset; /* reserved area for startup monitor */ + unsigned long bi_sramstart; /* start of SRAM memory */ + unsigned long bi_sramsize; /* size of SRAM memory */ + unsigned long bi_mbar_base; /* base of internal registers */ + unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */ + unsigned long bi_boot_params; /* where this board expects params */ + unsigned long bi_ip_addr; /* IP Address */ + unsigned char bi_enetaddr[6]; /* Ethernet adress */ + unsigned short bi_ethspeed; /* Ethernet speed in Mbps */ + unsigned long bi_intfreq; /* Internal Freq, in MHz */ + unsigned long bi_busfreq; /* Bus Freq, in MHz */ + unsigned long bi_baudrate; /* Console Baudrate */ + +#ifdef CONFIG_HAS_ETH1 + /* second onboard ethernet port */ + unsigned char bi_enet1addr[6]; +#endif +#ifdef CONFIG_HAS_ETH2 + /* third onboard ethernet port */ + unsigned char bi_enet2addr[6]; +#endif +#ifdef CONFIG_HAS_ETH3 + unsigned char bi_enet3addr[6]; +#endif } bd_t; -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLY__ */ -#endif /* __U_BOOT_H__ */ +#endif /* __U_BOOT_H__ */ diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h new file mode 100644 index 00000000000..ac529dfbc29 --- /dev/null +++ b/include/configs/M5329EVB.h @@ -0,0 +1,275 @@ +/* + * Configuation settings for the Freescale MCF5329 FireEngine board. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef _M5329EVB_H +#define _M5329EVB_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_MCF532x /* define processor family */ +#define CONFIG_M5329 /* define processor type */ + +#undef DEBUG + +#define CONFIG_MCFSERIAL +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } + +#undef CONFIG_WATCHDOG +#define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ + +#define CFG_NUM_IRQS 128 + +#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ + CFG_CMD_CACHE | \ + CFG_CMD_DATE | \ + CFG_CMD_ELF | \ + CFG_CMD_FLASH | \ + (CFG_CMD_LOADB | CFG_CMD_LOADS) | \ + CFG_CMD_MEMORY | \ + CFG_CMD_MISC | \ + CFG_CMD_MII | \ + CFG_CMD_NET | \ + CFG_CMD_PING | \ + CFG_CMD_REGINFO \ + ) + +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_MULTI 1 +# define CONFIG_MII 1 +# define CFG_DISCOVER_PHY +# define CFG_RX_ETH_BUFFER 8 +# define CFG_FAULT_ECHO_LINK_DOWN + +# define CFG_FEC0_IOBASE 0xFC030000 +# define CFG_FEC0_PINMUX 0 +# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 +/* If CFG_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CFG_DISCOVER_PHY +# define FECDUPLEX FULL +# define FECSPEED _100BASET +# else +# ifndef CFG_FAULT_ECHO_LINK_DOWN +# define CFG_FAULT_ECHO_LINK_DOWN +# endif +# endif /* CFG_DISCOVER_PHY */ +#endif + +#define CONFIG_MCFUART +#ifdef CONFIG_MCFUART +# define CFG_UART_PORT (0) +# define CFG_UART_BASE (0xFC060000) +#endif + +#define CONFIG_MCFRTC +#ifdef CONFIG_MCFRTC +# define CFG_MCFRTC_BASE (0xFC0A8000) +# undef RTC_DEBUG +#endif + +/* Timer */ +#define CONFIG_MCFTMR +#ifdef CONFIG_MCFTMR +# define CFG_UDELAY_BASE (0xFC070000) +# define CFG_TMR_BASE (0xFC074000) +# define CFG_TMRINTR_NO (33) +# define CFG_TMRINTR_MASK (2) +# define CFG_TMRINTR_PRI (6) +# define CFG_TIMER_PRESCALER (((CFG_CLK / 1000000) - 1) << 8) +#endif + +#undef CONFIG_MCFPIT +#ifdef CONFIG_MCFPIT +# define CFG_UDELAY_BASE (0xFC080000) +# define CFG_PIT_BASE (0xFC084000) +# define CFG_PIT_PRESCALE (6) +#endif + +#define CONFIG_MCFINTC +#ifdef CONFIG_MCFINTC +# define CFG_INTR_BASE (0xFC048000) +# define CFG_NUM_IRQ0 64 +# define CFG_NUM_IRQ1 64 +#endif + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include +#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ +#ifdef CONFIG_MCFFEC +# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 +# define CONFIG_IPADDR 192.162.1.2 +# define CONFIG_NETMASK 255.255.255.0 +# define CONFIG_SERVERIP 192.162.1.1 +# define CONFIG_GATEWAYIP 192.162.1.1 +# define CONFIG_OVERWRITE_ETHADDR_ONCE +#endif /* FEC_ENET */ + +#define CONFIG_HOSTNAME M5329EVB +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "loadaddr=40010000\0" \ + "u-boot=u-boot.bin\0" \ + "load=tftp ${loadaddr) ${u-boot}\0" \ + "upd=run load; run prog\0" \ + "prog=prot off 0 2ffff;" \ + "era 0 2ffff;" \ + "cp.b ${loadaddr} 0 ${filesize};" \ + "save\0" \ + "" + +#define CONFIG_PRAM 512 /* 512 KB */ +#define CFG_PROMPT "-> " +#define CFG_LONGHELP /* undef to save memory */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +# define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_LOAD_ADDR 0x40010000 + +#define CFG_HZ 1000 +#define CFG_CLK 80000000 +#define CFG_CPU_CLK CFG_CLK * 3 + +#define CFG_MBAR 0xFC000000 + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR 0x80000000 +#define CFG_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */ +#define CFG_INIT_RAM_CTRL 0x221 +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x40000000 +#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ +#define CFG_SDRAM_CFG1 0x53722730 +#define CFG_SDRAM_CFG2 0x56670000 +#define CFG_SDRAM_CTRL 0xE1092000 +#define CFG_SDRAM_EMOD 0x40010000 +#define CFG_SDRAM_MODE 0x018D0000 + +#define CFG_MEMTEST_START CFG_SDRAM_BASE + 0x400 +#define CFG_MEMTEST_END ((CFG_SDRAM_SIZE - 3) << 20) + +#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ + +#define CFG_BOOTPARAMS_LEN 64*1024 +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization ?? + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#undef CFG_FLASH_CFI +#ifdef CFG_FLASH_CFI +# define CFG_FLASH_CFI_DRIVER 1 +# define CFG_FLASH_SIZE 0x800000 /* Max size that the board might have */ +# define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT +#else +# define CFG_FLASH_UNLOCK_TOUT 1000 +# define CFG_FLASH_WRITE_TOUT 1000 +#endif + +#define CFG_FLASH_BASE 0 +#define CFG_FLASH0_BASE (CFG_CS0_BASE << 16) +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ +#define CFG_FLASH_ERASE_TOUT 1000 +#define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ + +/* Configuration for environment + * Environment is embedded in u-boot in the second sector of the flash + */ +#define CFG_ENV_OFFSET 0x4000 +#define CFG_ENV_SECT_SIZE 0x2000 +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_IS_EMBEDDED 1 + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 + +/*----------------------------------------------------------------------- + * Chipselect bank definitions + */ +/* + * CS0 - NOR Flash 1, 2, 4, or 8MB + * CS1 - CompactFlash and registers + * CS2 - NAND Flash 16, 32, or 64MB + * CS3 - Available + * CS4 - Available + * CS5 - Available + */ +#define CFG_CS0_BASE 0 +#define CFG_CS0_MASK 0x007f0001 +#define CFG_CS0_CTRL 0x00001fa0 + +#define CFG_CS1_BASE 0x1000 +#define CFG_CS1_MASK 0x001f0001 +#define CFG_CS1_CTRL 0x002A3780 + +#ifdef NANDFLASH_SIZE +#define CFG_CS2_BASE 0x00800000 +#define CFG_CS2_MASK 0x00ff0001 +#define CFG_CS2_CTRL 0x00001f60 +#endif + +#define CONFIG_UDP_CHECKSUM + +#endif /* _M5329EVB_H */ diff --git a/lib_m68k/Makefile b/lib_m68k/Makefile index 82165f098ae..03784fd84e2 100644 --- a/lib_m68k/Makefile +++ b/lib_m68k/Makefile @@ -27,7 +27,7 @@ LIB = $(obj)lib$(ARCH).a SOBJS = -COBJS = cache.o traps.o time.o board.o m68k_linux.o +COBJS = cache.o traps.o time.o interrupts.o board.o m68k_linux.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/lib_m68k/board.c b/lib_m68k/board.c index 6aaf60991c6..1b515a4c599 100644 --- a/lib_m68k/board.c +++ b/lib_m68k/board.c @@ -221,6 +221,7 @@ static int init_func_i2c (void) */ init_fnc_t *init_sequence[] = { + get_clocks, env_init, init_baudrate, serial_init, @@ -371,6 +372,10 @@ board_init_f (ulong bootflag) */ bd->bi_memstart = CFG_SDRAM_BASE; /* start of DRAM memory */ bd->bi_memsize = gd->ram_size; /* size of DRAM memory in bytes */ +#ifdef CFG_INIT_RAM_ADDR + bd->bi_sramstart = CFG_INIT_RAM_ADDR; /* start of SRAM memory */ + bd->bi_sramsize = CFG_INIT_RAM_END; /* size of SRAM memory */ +#endif bd->bi_mbar_base = CFG_MBAR; /* base of internal registers */ bd->bi_bootflags = bootflag; /* boot / reboot flag (for LynxOS) */ @@ -430,6 +435,10 @@ void board_init_r (gd_t *id, ulong dest_addr) gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */ +#ifdef CONFIG_SERIAL_MULTI + serial_initialize(); +#endif + debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr); WATCHDOG_RESET (); @@ -489,7 +498,7 @@ void board_init_r (gd_t *id, ulong dest_addr) /* * Setup trap handlers */ - trap_init (0); + trap_init (CFG_SDRAM_BASE); #if !defined(CFG_NO_FLASH) puts ("FLASH: "); @@ -562,12 +571,48 @@ void board_init_r (gd_t *id, ulong dest_addr) if (s) s = (*e) ? e + 1 : e; } +#ifdef CONFIG_HAS_ETH1 + /* handle the 2nd ethernet address */ + + s = getenv ("eth1addr"); + for (i = 0; i < 6; ++i) { + bd->bi_enet1addr[i] = s ? simple_strtoul (s, &e, 16) : 0; + if (s) + s = (*e) ? e + 1 : e; + } +#endif +#ifdef CONFIG_HAS_ETH2 + /* handle the 3rd ethernet address */ + + s = getenv ("eth2addr"); + for (i = 0; i < 6; ++i) { + bd->bi_enet2addr[i] = s ? simple_strtoul (s, &e, 16) : 0; + if (s) + s = (*e) ? e + 1 : e; + } +#endif + +#ifdef CONFIG_HAS_ETH3 + /* handle 4th ethernet address */ + s = getenv("eth3addr"); + for (i = 0; i < 6; ++i) { + bd->bi_enet3addr[i] = s ? simple_strtoul (s, &e, 16) : 0; + if (s) + s = (*e) ? e + 1 : e; + } +#endif /* IP Address */ bd->bi_ip_addr = getenv_IPaddr ("ipaddr"); WATCHDOG_RESET (); +#if defined(CONFIG_PCI) + /* + * Do pci configuration + */ + pci_init (); +#endif /** leave this here (after malloc(), environment and PCI are working) **/ /* Initialize devices */ @@ -640,15 +685,33 @@ void board_init_r (gd_t *id, ulong dest_addr) nand_init(); /* go init the NAND */ #endif -#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(FEC_ENET) +#if (CONFIG_COMMANDS & CFG_CMD_NET) WATCHDOG_RESET(); +#if defined(FEC_ENET) eth_init(bd); #endif +#if defined(CONFIG_NET_MULTI) + puts ("Net: "); + eth_initialize (bd); +#endif +#endif #ifdef CONFIG_POST post_run (NULL, POST_RAM | post_bootmode_get(0)); #endif +#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) && !(CONFIG_COMMANDS & CFG_CMD_IDE) + WATCHDOG_RESET (); + puts ("PCMCIA:"); + pcmcia_init (); +#endif + +#if (CONFIG_COMMANDS & CFG_CMD_IDE) + WATCHDOG_RESET (); + puts ("IDE: "); + ide_init (); +#endif /* CFG_CMD_IDE */ + #ifdef CONFIG_LAST_STAGE_INIT WATCHDOG_RESET (); /* diff --git a/lib_m68k/interrupts.c b/lib_m68k/interrupts.c new file mode 100644 index 00000000000..6b3ce8975db --- /dev/null +++ b/lib_m68k/interrupts.c @@ -0,0 +1,118 @@ +/* + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2007 + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#ifdef CONFIG_MCFINTC +#define NR_IRQS (CFG_NUM_IRQS) + +/* + * Interrupt vector functions. + */ +struct interrupt_action { + interrupt_handler_t *handler; + void *arg; +}; + +static struct interrupt_action irq_vecs[NR_IRQS]; + +static __inline__ unsigned short get_sr (void) +{ + unsigned short sr; + + asm volatile ("move.w %%sr,%0":"=r" (sr):); + + return sr; +} + +static __inline__ void set_sr (unsigned short sr) +{ + asm volatile ("move.w %0,%%sr"::"r" (sr)); +} + +/************************************************************************/ +/* + * Install and free an interrupt handler + */ +void irq_install_handler (int vec, interrupt_handler_t * handler, void *arg) +{ + if ((vec < 0) || (vec > NR_IRQS)) { + printf ("irq_install_handler: wrong interrupt vector %d\n", + vec); + return; + } + + irq_vecs[vec].handler = handler; + irq_vecs[vec].arg = arg; +} + +void irq_free_handler (int vec) +{ + if ((vec < 0) || (vec > NR_IRQS)) { + return; + } + + irq_vecs[vec].handler = NULL; + irq_vecs[vec].arg = NULL; +} + +void enable_interrupts (void) +{ + unsigned short sr; + + sr = get_sr (); + set_sr (sr & ~0x0700); +} + +int disable_interrupts (void) +{ + unsigned short sr; + + sr = get_sr (); + set_sr (sr | 0x0700); + + return ((sr & 0x0700) == 0); /* return TRUE, if interrupts were enabled before */ +} + +void int_handler (struct pt_regs *fp) +{ + int vec; + + vec = (fp->vector >> 2) & 0xff; + if (vec > 0x40) + vec -= 0x40; + else + return; + + if (irq_vecs[vec].handler != NULL) { + irq_vecs[vec].handler (irq_vecs[vec].arg); + } else { + printf ("\nBogus External Interrupt Vector %d\n", vec); + } +} +#endif /* CONFIG_MCFINTC */ \ No newline at end of file diff --git a/lib_m68k/time.c b/lib_m68k/time.c index 12e38f0577f..0e4efa473c7 100644 --- a/lib_m68k/time.c +++ b/lib_m68k/time.c @@ -46,13 +46,11 @@ #include #endif - static ulong timestamp; #if defined(CONFIG_M5282) || defined(CONFIG_M5271) static unsigned short lastinc; #endif - #if defined(CONFIG_M5272) /* * We use timer 3 which is running with a period of 1 us @@ -293,6 +291,171 @@ void set_timer (ulong t) } #endif +#if defined(CONFIG_MCFTMR) +#ifndef CFG_UDELAY_BASE +# error "uDelay base not defined!" +#endif + +#if !defined(CFG_TMR_BASE) || !defined(CFG_INTR_BASE) || !defined(CFG_TMRINTR_NO) || !defined(CFG_TMRINTR_MASK) +# error "TMR_BASE, INTR_BASE, TMRINTR_NO or TMRINTR_MASk not defined!" +#endif + +#include + +extern void dtimer_interrupt(void *not_used); +extern void dtimer_interrupt_setup(void); +extern void dtimer_interrupt_enable(void); + +void udelay(unsigned long usec) +{ + volatile dtmr_t *timerp = (dtmr_t *) (CFG_UDELAY_BASE); + uint start, now, tmp; + + while (usec > 0) { + if (usec > 65000) + tmp = 65000; + else + tmp = usec; + usec = usec - tmp; + + /* Set up TIMER 3 as timebase clock */ + timerp->tmr = DTIM_DTMR_RST_RST; + timerp->tcn = 0; + /* set period to 1 us */ + timerp->tmr = + (((CFG_CLK / 1000000) - + 1) << 8) | DTIM_DTMR_CLK_DIV1 | DTIM_DTMR_FRR | DTIM_DTMR_RST_EN; + + start = now = timerp->tcn; + while (now < start + tmp) + now = timerp->tcn; + } +} + +void dtimer_interrupt(void *not_used) +{ + volatile dtmr_t *timerp = (dtmr_t *) (CFG_TMR_BASE); + volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE); + + /* check for timer interrupt asserted */ + if ((intp->iprh0 & CFG_TMRINTR_MASK) == CFG_TMRINTR_MASK) { + timerp->ter = (DTIM_DTER_CAP | DTIM_DTER_REF); + timestamp++; + return; + } +} + +void timer_init(void) +{ + volatile dtmr_t *timerp = (dtmr_t *) (CFG_TMR_BASE); + volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE); + + timestamp = 0; + + timerp->tcn = 0; + timerp->trr = 0; + + /* Set up TIMER 4 as clock */ + timerp->tmr = DTIM_DTMR_RST_RST; + + /* initialize and enable timer 4 interrupt */ + irq_install_handler(CFG_TMRINTR_NO, dtimer_interrupt, 0); + intp->icr0[CFG_TMRINTR_NO] = CFG_TMRINTR_PRI; + + timerp->tcn = 0; + timerp->trr = 1000; /* Interrupt every ms */ + + intp->imrh0 &= ~CFG_TMRINTR_MASK; + + /* set a period of 1us, set timer mode to restart and enable timer and interrupt */ + timerp->tmr = CFG_TIMER_PRESCALER | DTIM_DTMR_CLK_DIV1 | + DTIM_DTMR_FRR | DTIM_DTMR_ORRI | DTIM_DTMR_RST_EN; +} + +void reset_timer(void) +{ + timestamp = 0; +} + +ulong get_timer(ulong base) +{ + return (timestamp - base); +} + +void set_timer(ulong t) +{ + timestamp = t; +} +#endif /* CONFIG_MCFTMR */ + +#if defined(CONFIG_MCFPIT) +#if !defined(CFG_PIT_BASE) +# error "CFG_PIT_BASE not defined!" +#endif + +static unsigned short lastinc; + +void udelay(unsigned long usec) +{ + volatile pit_t *timerp = (pit_t *) (CFG_UDELAY_BASE); + uint tmp; + + while (usec > 0) { + if (usec > 65000) + tmp = 65000; + else + tmp = usec; + usec = usec - tmp; + + /* Set up TIMER 3 as timebase clock */ + timerp->pcsr = PIT_PCSR_OVW; + timerp->pmr = 0; + /* set period to 1 us */ + timerp->pcsr |= PIT_PCSR_PRE(CFG_PIT_PRESCALE) | PIT_PCSR_EN; + + timerp->pmr = tmp; + while (timerp->pcntr > 0) ; + } +} + +void timer_init(void) +{ + volatile pit_t *timerp = (pit_t *) (CFG_PIT_BASE); + timestamp = 0; + + /* Set up TIMER 4 as poll clock */ + timerp->pcsr = PIT_PCSR_OVW; + timerp->pmr = lastinc = 0; + timerp->pcsr |= PIT_PCSR_PRE(CFG_PIT_PRESCALE) | PIT_PCSR_EN; +} + +void set_timer(ulong t) +{ + volatile pit_t *timerp = (pit_t *) (CFG_PIT_BASE); + + timestamp = 0; + timerp->pmr = lastinc = 0; +} + +ulong get_timer(ulong base) +{ + unsigned short now, diff; + volatile pit_t *timerp = (pit_t *) (CFG_PIT_BASE); + + now = timerp->pcntr; + diff = -(now - lastinc); + + timestamp += diff; + lastinc = now; + return timestamp - base; +} + +void wait_ticks(unsigned long ticks) +{ + set_timer(0); + while (get_timer(0) < ticks) ; +} +#endif /* CONFIG_MCFPIT */ /* * This function is derived from PowerPC code (read timebase as long long). diff --git a/net/eth.c b/net/eth.c index 0fc22115dc2..cefd30ff231 100644 --- a/net/eth.c +++ b/net/eth.c @@ -58,6 +58,7 @@ extern int npe_initialize(bd_t *); extern int uec_initialize(int); extern int bfin_EMAC_initialize(bd_t *); extern int atstk1000_eth_initialize(bd_t *); +extern int mcffec_initialize(bd_t*); static struct eth_device *eth_devices, *eth_current; diff --git a/rtc/Makefile b/rtc/Makefile index 96c68c0ce71..2e6f3bdddf0 100644 --- a/rtc/Makefile +++ b/rtc/Makefile @@ -31,7 +31,8 @@ COBJS = date.o \ bf5xx_rtc.o ds12887.o ds1302.o ds1306.o ds1307.o \ ds1337.o ds1374.o ds1556.o ds164x.o ds174x.o ds3231.o \ m41t11.o max6900.o m48t35ax.o mc146818.o mk48t59.o \ - mpc5xxx.o mpc8xx.o pcf8563.o s3c24x0_rtc.o rs5c372.o + mpc5xxx.o mpc8xx.o pcf8563.o s3c24x0_rtc.o rs5c372.o \ + mcfrtc.o SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/rtc/mcfrtc.c b/rtc/mcfrtc.c new file mode 100644 index 00000000000..c7eb53fb46a --- /dev/null +++ b/rtc/mcfrtc.c @@ -0,0 +1,120 @@ +/* + * (C) Copyright 2007 + * Freescale Semiconductor Tsi-Chung.Liew@freescale.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include + +#if defined(CONFIG_MCFRTC) && (CONFIG_COMMANDS & CFG_CMD_DATE) + +#undef RTC_DEBUG + +#ifndef CFG_MCFRTC_BASE +#error RTC_BASE is not defined! +#endif + +#define isleap(y) ((((y) % 4) == 0 && ((y) % 100) != 0) || ((y) % 400) == 0) +#define STARTOFTIME 1970 + +void rtc_get(struct rtc_time *tmp) +{ + volatile rtc_t *rtc = (rtc_t *) (CFG_MCFRTC_BASE); + + int rtc_days, rtc_hrs, rtc_mins; + int tim; + + rtc_days = rtc->days; + rtc_hrs = rtc->hourmin >> 8; + rtc_mins = RTC_HOURMIN_MINUTES(rtc->hourmin); + + tim = (rtc_days * 24) + rtc_hrs; + tim = (tim * 60) + rtc_mins; + tim = (tim * 60) + rtc->seconds; + + to_tm(tim, tmp); + + tmp->tm_yday = 0; + tmp->tm_isdst = 0; + +#ifdef RTC_DEBUG + printf("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", + tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, + tmp->tm_hour, tmp->tm_min, tmp->tm_sec); +#endif +} + +void rtc_set(struct rtc_time *tmp) +{ + volatile rtc_t *rtc = (rtc_t *) (CFG_MCFRTC_BASE); + + static int month_days[12] = { + 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 + }; + int days, i, months; + + if (tmp->tm_year > 2037) { + printf("Unable to handle. Exceeding integer limitation!\n"); + tmp->tm_year = 2027; + } +#ifdef RTC_DEBUG + printf("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", + tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, + tmp->tm_hour, tmp->tm_min, tmp->tm_sec); +#endif + + /* calculate days by years */ + for (i = STARTOFTIME, days = 0; i < tmp->tm_year; i++) { + days += 365 + isleap(i); + } + + /* calculate days by months */ + months = tmp->tm_mon - 1; + for (i = 0; i < months; i++) { + days += month_days[i]; + + if (i == 1) + days += isleap(i); + } + + days += tmp->tm_mday - 1; + + rtc->days = days; + rtc->hourmin = (tmp->tm_hour << 8) | tmp->tm_min; + rtc->seconds = tmp->tm_sec; +} + +void rtc_reset(void) +{ + volatile rtc_t *rtc = (rtc_t *) (CFG_MCFRTC_BASE); + + if ((rtc->cr & RTC_CR_EN) == 0) { + printf("real-time-clock was stopped. Now starting...\n"); + rtc->cr |= RTC_CR_EN; + } + + rtc->cr |= RTC_CR_SWR; +} + +#endif /* CONFIG_MCFRTC && CFG_CMD_DATE */ -- cgit v1.3.1 From 566a494f592ae3b3c0785d90d4e1ba45574880c4 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Fri, 22 Jun 2007 19:11:54 +0200 Subject: [PCS440EP] upgrade the PCS440EP board: - Show on the Status LEDs, some States of the board. - Get the MAC addresses from the EEProm - use PREBOOT - use the CF on the board. - check the U-Boot image in the Flash with a SHA1 checksum. - use dynamic TLB entries generation for the SDRAM Signed-off-by: Heiko Schocher --- Makefile | 9 +- README | 85 +++++-- board/hermes/hermes.c | 1 + board/logodl/logodl.c | 1 + board/pcs440ep/config.mk | 3 + board/pcs440ep/flash.c | 4 + board/pcs440ep/init.S | 41 ++-- board/pcs440ep/pcs440ep.c | 500 +++++++++++++++++++++++++++++++++++++++- board/pcs440ep/u-boot.lds | 1 + board/sc520_cdp/sc520_cdp.c | 1 + board/sc520_spunk/sc520_spunk.c | 1 + common/cmd_doc.c | 19 +- common/cmd_ide.c | 60 +++-- common/cmd_nand.c | 38 ++- common/cmd_net.c | 26 ++- common/cmd_reiser.c | 6 +- common/env_common.c | 2 +- cpu/ppc4xx/44x_spd_ddr.c | 26 ++- cpu/ppc4xx/44x_spd_ddr2.c | 71 +++--- disk/part.c | 3 +- fs/fat/fat.c | 42 ++-- include/configs/pcs440ep.h | 83 ++++++- include/sha1.h | 115 +++++++++ include/status_led.h | 7 + lib_generic/Makefile | 2 +- lib_generic/sha1.c | 430 ++++++++++++++++++++++++++++++++++ lib_ppc/board.c | 5 +- net/eth.c | 11 + tools/Makefile | 23 +- tools/ubsha1.c | 119 ++++++++++ 30 files changed, 1575 insertions(+), 160 deletions(-) create mode 100644 include/sha1.h create mode 100644 lib_generic/sha1.c create mode 100644 tools/ubsha1.c (limited to 'Makefile') diff --git a/Makefile b/Makefile index d5e220aadde..3d64d1673e8 100644 --- a/Makefile +++ b/Makefile @@ -245,7 +245,7 @@ __LIBS := $(subst $(obj),,$(LIBS)) ######################################################################### ######################################################################### -ALL = $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND) +ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND) all: $(ALL) @@ -265,6 +265,9 @@ $(obj)u-boot.img: $(obj)u-boot.bin sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \ -d $< $@ +$(obj)u-boot.sha1: $(obj)u-boot.bin + ./tools/ubsha1 $(obj)u-boot.bin + $(obj)u-boot.dis: $(obj)u-boot $(OBJDUMP) -d $< > $@ @@ -2455,7 +2458,7 @@ clean: $(obj)examples/smc91111_eeprom $(obj)examples/interrupt \ $(obj)examples/test_burst rm -f $(obj)tools/img2srec $(obj)tools/mkimage $(obj)tools/envcrc \ - $(obj)tools/gen_eth_addr + $(obj)tools/gen_eth_addr $(obj)tools/ubsha1 rm -f $(obj)tools/mpc86x_clk $(obj)tools/ncb rm -f $(obj)tools/easylogo/easylogo $(obj)tools/bmp_logo rm -f $(obj)tools/gdb/astest $(obj)tools/gdb/gdbcont $(obj)tools/gdb/gdbsend @@ -2478,7 +2481,7 @@ clobber: clean rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS $(obj)include/version_autogenerated.h rm -fr $(obj)*.*~ rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL) - rm -f $(obj)tools/crc32.c $(obj)tools/environment.c $(obj)tools/env/crc32.c + rm -f $(obj)tools/crc32.c $(obj)tools/environment.c $(obj)tools/env/crc32.c $(obj)tools/sha1.c rm -f $(obj)tools/inca-swap-bytes $(obj)cpu/mpc824x/bedbug_603e.c rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm [ ! -d $(OBJTREE)/nand_spl ] || find $(obj)nand_spl -lname "*" -print | xargs rm -f diff --git a/README b/README index bb5b46e3379..b64bfb2477c 100644 --- a/README +++ b/README @@ -1699,28 +1699,69 @@ The following options need to be configured: -31 post/post.c POST test failed, detected by post_output_backlog() -32 post/post.c POST test failed, detected by post_run_single() - -1 common/cmd_doc.c Bad usage of "doc" command - -1 common/cmd_doc.c No boot device - -1 common/cmd_doc.c Unknown Chip ID on boot device - -1 common/cmd_doc.c Read Error on boot device - -1 common/cmd_doc.c Image header has bad magic number - - -1 common/cmd_ide.c Bad usage of "ide" command - -1 common/cmd_ide.c No boot device - -1 common/cmd_ide.c Unknown boot device - -1 common/cmd_ide.c Unknown partition table - -1 common/cmd_ide.c Invalid partition type - -1 common/cmd_ide.c Read Error on boot device - -1 common/cmd_ide.c Image header has bad magic number - - -1 common/cmd_nand.c Bad usage of "nand" command - -1 common/cmd_nand.c No boot device - -1 common/cmd_nand.c Unknown Chip ID on boot device - -1 common/cmd_nand.c Read Error on boot device - -1 common/cmd_nand.c Image header has bad magic number - - -1 common/env_common.c Environment has a bad CRC, using default - + 34 common/cmd_doc.c before loading a Image from a DOC device + -35 common/cmd_doc.c Bad usage of "doc" command + 35 common/cmd_doc.c correct usage of "doc" command + -36 common/cmd_doc.c No boot device + 36 common/cmd_doc.c correct boot device + -37 common/cmd_doc.c Unknown Chip ID on boot device + 37 common/cmd_doc.c correct chip ID found, device available + -38 common/cmd_doc.c Read Error on boot device + 38 common/cmd_doc.c reading Image header from DOC device OK + -39 common/cmd_doc.c Image header has bad magic number + 39 common/cmd_doc.c Image header has correct magic number + -40 common/cmd_doc.c Error reading Image from DOC device + 40 common/cmd_doc.c Image header has correct magic number + 41 common/cmd_ide.c before loading a Image from a IDE device + -42 common/cmd_ide.c Bad usage of "ide" command + 42 common/cmd_ide.c correct usage of "ide" command + -43 common/cmd_ide.c No boot device + 43 common/cmd_ide.c boot device found + -44 common/cmd_ide.c Device not available + 44 common/cmd_ide.c Device available + -45 common/cmd_ide.c wrong partition selected + 45 common/cmd_ide.c partition selected + -46 common/cmd_ide.c Unknown partition table + 46 common/cmd_ide.c valid partition table found + -47 common/cmd_ide.c Invalid partition type + 47 common/cmd_ide.c correct partition type + -48 common/cmd_ide.c Error reading Image Header on boot device + 48 common/cmd_ide.c reading Image Header from IDE device OK + -49 common/cmd_ide.c Image header has bad magic number + 49 common/cmd_ide.c Image header has correct magic number + -50 common/cmd_ide.c Image header has bad checksum + 50 common/cmd_ide.c Image header has correct checksum + -51 common/cmd_ide.c Error reading Image from IDE device + 51 common/cmd_ide.c reading Image from IDE device OK + 52 common/cmd_nand.c before loading a Image from a NAND device + -53 common/cmd_nand.c Bad usage of "nand" command + 53 common/cmd_nand.c correct usage of "nand" command + -54 common/cmd_nand.c No boot device + 54 common/cmd_nand.c boot device found + -55 common/cmd_nand.c Unknown Chip ID on boot device + 55 common/cmd_nand.c correct chip ID found, device available + -56 common/cmd_nand.c Error reading Image Header on boot device + 56 common/cmd_nand.c reading Image Header from NAND device OK + -57 common/cmd_nand.c Image header has bad magic number + 57 common/cmd_nand.c Image header has correct magic number + -58 common/cmd_nand.c Error reading Image from NAND device + 58 common/cmd_nand.c reading Image from NAND device OK + + -60 common/env_common.c Environment has a bad CRC, using default + + 64 net/eth.c starting with Ethernetconfiguration. + -64 net/eth.c no Ethernet found. + 65 net/eth.c Ethernet found. + + -80 common/cmd_net.c usage wrong + 80 common/cmd_net.c before calling NetLoop() + -81 common/cmd_net.c some error in NetLoop() occured + 81 common/cmd_net.c NetLoop() back without error + -82 common/cmd_net.c size == 0 (File with size 0 loaded) + 82 common/cmd_net.c trying automatic boot + 83 common/cmd_net.c running autoscript + -83 common/cmd_net.c some error in automatic boot or autoscript + 84 common/cmd_net.c end without errors Modem Support: -------------- diff --git a/board/hermes/hermes.c b/board/hermes/hermes.c index a523db1a487..8fd081fef3a 100644 --- a/board/hermes/hermes.c +++ b/board/hermes/hermes.c @@ -597,6 +597,7 @@ void show_boot_progress (int status) { volatile immap_t *immr = (immap_t *) CFG_IMMR; + if (status < -32) status = -1; /* let things compatible */ status ^= 0x0F; status = (status & 0x0F) << 14; immr->im_cpm.cp_pbdat = (immr->im_cpm.cp_pbdat & ~PB_LED_ALL) | status; diff --git a/board/logodl/logodl.c b/board/logodl/logodl.c index 14fd28f56fc..897787bcf7a 100644 --- a/board/logodl/logodl.c +++ b/board/logodl/logodl.c @@ -107,6 +107,7 @@ void logodl_set_led(int led, int state) void show_boot_progress (int status) { + if (status < -32) status = -1; /* let things compatible */ /* switch(status) { case 1: logodl_set_led(0,1); break; diff --git a/board/pcs440ep/config.mk b/board/pcs440ep/config.mk index 319c4fa214a..4d942ebc71b 100644 --- a/board/pcs440ep/config.mk +++ b/board/pcs440ep/config.mk @@ -25,6 +25,9 @@ # PCS440EP board # +# Check the U-Boot Image with a SHA1 checksum +ALL += $(obj)u-boot.sha1 + #TEXT_BASE = 0x00001000 ifeq ($(ramsym),1) diff --git a/board/pcs440ep/flash.c b/board/pcs440ep/flash.c index ece54781b9d..70014407c6e 100644 --- a/board/pcs440ep/flash.c +++ b/board/pcs440ep/flash.c @@ -83,6 +83,7 @@ void flash_print_info(flash_info_t *info) case FLASH_MAN_FUJ: printf ("FUJITSU "); break; case FLASH_MAN_SST: printf ("SST "); break; case FLASH_MAN_EXCEL: printf ("Excel Semiconductor "); break; + case FLASH_MAN_MX: printf ("MXIC "); break; default: printf ("Unknown Vendor "); break; } @@ -195,6 +196,9 @@ static ulong flash_get_size(vu_long *addr, flash_info_t *info) case (CFG_FLASH_WORD_SIZE)EXCEL_MANUFACT: info->flash_id = FLASH_MAN_EXCEL; break; + case (CFG_FLASH_WORD_SIZE)MX_MANUFACT: + info->flash_id = FLASH_MAN_MX; + break; default: info->flash_id = FLASH_UNKNOWN; info->sector_count = 0; diff --git a/board/pcs440ep/init.S b/board/pcs440ep/init.S index 0eee4d8099e..36a40c97a3d 100644 --- a/board/pcs440ep/init.S +++ b/board/pcs440ep/init.S @@ -87,27 +87,32 @@ .globl tlbtab tlbtab: - tlbtab_start + tlbtab_start - /* - * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the - * speed up boot process. It is patched after relocation to enable SA_I - */ - tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/) + /* + * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the + * speed up boot process. It is patched after relocation to enable SA_I + */ + tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/) - /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ - tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G ) + /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ + tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G ) - tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I ) - tlbentry( CFG_PCI_BASE, SZ_256M, CFG_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I ) + /* + * TLB entries for SDRAM are not needed on this platform. + * They are dynamically generated in the SPD DDR detection + * routine. + */ - /* PCI */ - tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CFG_PCI_BASE, SZ_256M, CFG_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I ) - /* USB 2.0 Device */ - tlbentry( CFG_USB_DEVICE, SZ_1K, 0x50000000, 0, AC_R|AC_W|SA_G|SA_I ) + /* PCI */ + tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I ) - tlbtab_end + /* USB 2.0 Device */ + tlbentry( CFG_USB_DEVICE, SZ_1K, 0x50000000, 0, AC_R|AC_W|SA_G|SA_I ) + + tlbtab_end diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c index 8858f0a5e54..f638589df29 100644 --- a/board/pcs440ep/pcs440ep.c +++ b/board/pcs440ep/pcs440ep.c @@ -23,19 +23,111 @@ #include #include +#include +#include +#include #include #include +#include +#include DECLARE_GLOBAL_DATA_PTR; extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ -static void set_leds(int val) +unsigned char sha1_checksum[SHA1_SUM_LEN]; + +/* swap 4 Bits (Bit0 = Bit3, Bit1 = Bit2, Bit2 = Bit1 and Bit3 = Bit0) */ +unsigned char swapbits[16] = {0x0, 0x8, 0x4, 0xc, 0x2, 0xa, 0x6, 0xe, + 0x1, 0x9, 0x5, 0xd, 0x3, 0xb, 0x7, 0xf}; + +static void set_leds (int val) +{ + out32(GPIO0_OR, (in32 (GPIO0_OR) & ~0x78000000) | (val << 27)); +} + +#define GET_LEDS ((in32 (GPIO0_OR) & 0x78000000) >> 27) + +void __led_init (led_id_t mask, int state) +{ + int val = GET_LEDS; + + if (state == STATUS_LED_ON) + val |= mask; + else + val &= ~mask; + set_leds (val); +} + +void __led_set (led_id_t mask, int state) +{ + int val = GET_LEDS; + + if (state == STATUS_LED_ON) + val |= mask; + else if (state == STATUS_LED_OFF) + val &= ~mask; + set_leds (val); +} + +void __led_toggle (led_id_t mask) +{ + int val = GET_LEDS; + + val ^= mask; + set_leds (val); +} + +static void status_led_blink (void) +{ + int i; + int val = GET_LEDS; + + /* set all LED which are on, to state BLINKING */ + for (i = 0; i < 4; i++) { + if (val & 0x08) status_led_set (i, STATUS_LED_BLINKING); + val = val << 1; + } +} + +#if defined(CONFIG_SHOW_BOOT_PROGRESS) +void show_boot_progress (int val) { - unsigned char led[16] = {0x0, 0x8, 0x4, 0xc, 0x2, 0xa, 0x6, 0xe, - 0x1, 0x9, 0x5, 0xd, 0x3, 0xb, 0x7, 0xf}; - out32(GPIO0_OR, (in32(GPIO0_OR) & ~0x78000000) | (led[val] << 27)); + /* find all valid Codes for val in README */ + if (val == -30) return; + if (val < 0) { + /* smthing goes wrong */ + status_led_blink (); + return; + } + switch (val) { + case 1: + /* validating Image */ + status_led_set (0, STATUS_LED_OFF); + status_led_set (1, STATUS_LED_ON); + status_led_set (2, STATUS_LED_ON); + break; + case 15: + /* booting */ + status_led_set (0, STATUS_LED_ON); + status_led_set (1, STATUS_LED_ON); + status_led_set (2, STATUS_LED_ON); + break; + case 64: + /* starting Ethernet configuration */ + status_led_set (0, STATUS_LED_OFF); + status_led_set (1, STATUS_LED_OFF); + status_led_set (2, STATUS_LED_ON); + break; + case 80: + /* loading Image */ + status_led_set (0, STATUS_LED_ON); + status_led_set (1, STATUS_LED_OFF); + status_led_set (2, STATUS_LED_ON); + break; + } } +#endif int board_early_init_f(void) { @@ -85,6 +177,252 @@ int board_early_init_f(void) return 0; } +#define EEPROM_LEN 256 +void load_sernum_ethaddr (void) +{ + int ret; + char buf[EEPROM_LEN]; + char mac[32]; + char *use_eeprom; + u16 checksumcrc16 = 0; + + /* read the MACs from EEprom */ + status_led_set (0, STATUS_LED_ON); + status_led_set (1, STATUS_LED_ON); + ret = eeprom_read (CFG_I2C_EEPROM_ADDR, 0, (uchar *)buf, EEPROM_LEN); + if (ret == 0) { + checksumcrc16 = cyg_crc16 ((uchar *)buf, EEPROM_LEN - 2); + /* check, if the EEprom is programmed: + * - The Prefix(Byte 0,1,2) is equal to "ATR" + * - The checksum, stored in the last 2 Bytes, is correct + */ + if ((strncmp (buf,"ATR",3) != 0) || + ((checksumcrc16 >> 8) != buf[EEPROM_LEN - 2]) || + ((checksumcrc16 & 0xff) != buf[EEPROM_LEN - 1])) + { + /* EEprom is not programmed */ + printf("%s: EEPROM Checksum not OK\n", __FUNCTION__); + } else { + /* get the MACs */ + sprintf (mac, "%02x:%02x:%02x:%02x:%02x:%02x", + buf[3], + buf[4], + buf[5], + buf[6], + buf[7], + buf[8]); + setenv ("ethaddr", (char *) mac); + sprintf (mac, "%02x:%02x:%02x:%02x:%02x:%02x", + buf[9], + buf[10], + buf[11], + buf[12], + buf[13], + buf[14]); + setenv ("eth1addr", (char *) mac); + return; + } + } + + /* some error reading the EEprom */ + if ((use_eeprom = getenv ("use_eeprom_ethaddr")) == NULL) { + /* dont use bootcmd */ + setenv("bootdelay", "-1"); + return; + } + /* == default ? use standard */ + if (strncmp (use_eeprom, "default", 7) == 0) { + return; + } + /* Env doesnt exist -> hang */ + status_led_blink (); + hang (); + return; +} + +#ifdef CONFIG_PREBOOT + +static uchar kbd_magic_prefix[] = "key_magic"; +static uchar kbd_command_prefix[] = "key_cmd"; + +struct kbd_data_t { + char s1; + char s2; +}; + +struct kbd_data_t* get_keys (struct kbd_data_t *kbd_data) +{ + char *val; + unsigned long tmp; + + /* use the DIPs for some bootoptions */ + val = getenv (ENV_NAME_DIP); + tmp = simple_strtoul (val, NULL, 16); + + kbd_data->s2 = (tmp & 0x0f); + kbd_data->s1 = (tmp & 0xf0) >> 4; + return kbd_data; +} + +static int compare_magic (const struct kbd_data_t *kbd_data, char *str) +{ + char s1 = str[0]; + + if (s1 >= '0' && s1 <= '9') + s1 -= '0'; + else if (s1 >= 'a' && s1 <= 'f') + s1 = s1 - 'a' + 10; + else if (s1 >= 'A' && s1 <= 'F') + s1 = s1 - 'A' + 10; + else + return -1; + + if (s1 != kbd_data->s1) return -1; + + s1 = str[1]; + if (s1 >= '0' && s1 <= '9') + s1 -= '0'; + else if (s1 >= 'a' && s1 <= 'f') + s1 = s1 - 'a' + 10; + else if (s1 >= 'A' && s1 <= 'F') + s1 = s1 - 'A' + 10; + else + return -1; + + if (s1 != kbd_data->s2) return -1; + return 0; +} + +static char *key_match (const struct kbd_data_t *kbd_data) +{ + char magic[sizeof (kbd_magic_prefix) + 1]; + char *suffix; + char *kbd_magic_keys; + + /* + * The following string defines the characters that can be appended + * to "key_magic" to form the names of environment variables that + * hold "magic" key codes, i. e. such key codes that can cause + * pre-boot actions. If the string is empty (""), then only + * "key_magic" is checked (old behaviour); the string "125" causes + * checks for "key_magic1", "key_magic2" and "key_magic5", etc. + */ + if ((kbd_magic_keys = getenv ("magic_keys")) == NULL) + kbd_magic_keys = ""; + + /* loop over all magic keys; + * use '\0' suffix in case of empty string + */ + for (suffix = kbd_magic_keys; *suffix || + suffix == kbd_magic_keys; ++suffix) { + sprintf (magic, "%s%c", kbd_magic_prefix, *suffix); + if (compare_magic (kbd_data, getenv (magic)) == 0) { + char cmd_name[sizeof (kbd_command_prefix) + 1]; + char *cmd; + + sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix); + cmd = getenv (cmd_name); + + return (cmd); + } + } + return (NULL); +} + +#endif /* CONFIG_PREBOOT */ + +static int pcs440ep_readinputs (void) +{ + int i; + char value[20]; + + /* read the inputs and set the Envvars */ + /* Revision Level Bit 26 - 29 */ + i = ((in32 (GPIO0_IR) & 0x0000003c) >> 2); + i = swapbits[i]; + sprintf (value, "%02x", i); + setenv (ENV_NAME_REVLEV, value); + /* Solder Switch Bit 30 - 33 */ + i = (in32 (GPIO0_IR) & 0x00000003) << 2; + i += (in32 (GPIO1_IR) & 0xc0000000) >> 30; + i = swapbits[i]; + sprintf (value, "%02x", i); + setenv (ENV_NAME_SOLDER, value); + /* DIP Switch Bit 49 - 56 */ + i = ((in32 (GPIO1_IR) & 0x00007f80) >> 7); + i = (swapbits[i & 0x0f] << 4) + swapbits[(i & 0xf0) >> 4]; + sprintf (value, "%02x", i); + setenv (ENV_NAME_DIP, value); + return 0; +} + + +#if defined(CONFIG_SHA1_CHECK_UB_IMG) +/************************************************************************* + * calculate a SHA1 sum for the U-Boot image in Flash. + * + ************************************************************************/ +static int pcs440ep_sha1 (int docheck) +{ + unsigned char *data; + unsigned char *ptroff; + unsigned char output[20]; + unsigned char org[20]; + int i, len = CONFIG_SHA1_LEN; + + memcpy ((char *)CFG_LOAD_ADDR, (char *)CONFIG_SHA1_START, len); + data = (unsigned char *)CFG_LOAD_ADDR; + ptroff = &data[len + SHA1_SUM_POS]; + + for (i = 0; i < SHA1_SUM_LEN; i++) { + org[i] = ptroff[i]; + ptroff[i] = 0; + } + + sha1_csum ((unsigned char *) data, len, (unsigned char *)output); + + if (docheck == 2) { + for (i = 0; i < 20 ; i++) { + printf("%02X ", output[i]); + } + printf("\n"); + } + if (docheck == 1) { + for (i = 0; i < 20 ; i++) { + if (org[i] != output[i]) return 1; + } + } + return 0; +} + +/************************************************************************* + * do some checks after the SHA1 checksum from the U-Boot Image was + * calculated. + * + ************************************************************************/ +static void pcs440ep_checksha1 (void) +{ + int ret; + char *cs_test; + + ret = pcs440ep_sha1 (1); + if (ret == 0) return; + + if ((cs_test = getenv ("cs_test")) == NULL) { + /* Env doesnt exist -> hang */ + status_led_blink (); + hang (); + } + + if (strncmp (cs_test, "off", 3) == 0) { + printf ("SHA1 U-Boot sum NOT ok!\n"); + setenv ("bootdelay", "-1"); + } +} +#else +static __inline__ void pcs440ep_checksha1 (void) { do {} while (0);} +#endif + int misc_init_r (void) { uint pbcr; @@ -139,6 +477,18 @@ int misc_init_r (void) CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1, &flash_info[1]); + pcs440ep_readinputs (); + pcs440ep_checksha1 (); +#ifdef CONFIG_PREBOOT + { + struct kbd_data_t kbd_data; + /* Decode keys */ + char *str = strdup (key_match (get_keys (&kbd_data))); + /* Set or delete definition */ + setenv ("preboot", str); + free (str); + } +#endif /* CONFIG_PREBOOT */ return 0; } @@ -156,13 +506,34 @@ int checkboard(void) return (0); } + +#if defined(CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG) +void spd_ddr_init_hang (void) +{ + status_led_set (0, STATUS_LED_OFF); + status_led_set (1, STATUS_LED_ON); + /* we cannot use hang() because we are still running from + Flash, and so the status_led driver is not initialized */ + puts ("### ERROR ### Please RESET the board ###\n"); + for (;;) { + __led_toggle (4); + udelay (100000); + } +} +#endif + long int initdram (int board_type) { long dram_size = 0; - set_leds(1); /* display boot info counter */ + status_led_set (0, STATUS_LED_ON); + status_led_set (1, STATUS_LED_OFF); dram_size = spd_sdram(); - set_leds(2); /* display boot info counter */ + status_led_set (0, STATUS_LED_OFF); + status_led_set (1, STATUS_LED_ON); + if (dram_size == 0) { + hang(); + } return dram_size; } @@ -377,3 +748,120 @@ void hw_watchdog_reset(void) } #endif + +/************************************************************************* + * "led" Commando for the U-Boot shell + * + ************************************************************************/ +int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + int rcode = 0; + ulong pattern = 0; + + pattern = simple_strtoul (argv[1], NULL, 10); + if (pattern > 200) { + status_led_blink (); + hang (); + return rcode; + } + if (pattern > 100) { + status_led_blink (); + return rcode; + } + pattern &= 0x0f; + set_leds (pattern); + return rcode; +} + +U_BOOT_CMD( + led, 2, 1, do_led, + "led - set the led\n", + NULL +); + +#if defined(CONFIG_SHA1_CHECK_UB_IMG) +/************************************************************************* + * "sha1" Commando for the U-Boot shell + * + ************************************************************************/ +int do_sha1 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + int rcode = -1; + + if (argc < 2) { + usage: + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + if (argc >= 3) { + unsigned char *data; + unsigned char output[20]; + int len; + int i; + + data = (unsigned char *)simple_strtoul (argv[1], NULL, 16); + len = simple_strtoul (argv[2], NULL, 16); + sha1_csum (data, len, (unsigned char *)output); + printf ("U-Boot sum:\n"); + for (i = 0; i < 20 ; i++) { + printf ("%02X ", output[i]); + } + printf ("\n"); + if (argc == 4) { + data = (unsigned char *)simple_strtoul (argv[3], NULL, 16); + memcpy (data, output, 20); + } + return 0; + } + if (argc == 2) { + char *ptr = argv[1]; + if (*ptr != '-') goto usage; + ptr++; + if ((*ptr == 'c') || (*ptr == 'C')) { + rcode = pcs440ep_sha1 (1); + printf ("SHA1 U-Boot sum %sok!\n", (rcode != 0) ? "not " : ""); + } else if ((*ptr == 'p') || (*ptr == 'P')) { + rcode = pcs440ep_sha1 (2); + } else { + rcode = pcs440ep_sha1 (0); + } + return rcode; + } + return rcode; +} + +U_BOOT_CMD( + sha1, 4, 1, do_sha1, + "sha1 - calculate the SHA1 Sum\n", + "address len [addr] calculate the SHA1 sum [save at addr]\n" + " -p calculate the SHA1 sum from the U-Boot image in flash and print\n" + " -c check the U-Boot image in flash\n" +); +#endif + +#ifdef CONFIG_IDE_PREINIT +int ide_preinit (void) +{ + /* Set True IDE Mode */ + out32 (GPIO0_OR, (in32 (GPIO0_OR) | 0x00100000)); + out32 (GPIO0_OR, (in32 (GPIO0_OR) | 0x00200000)); + out32 (GPIO1_OR, (in32 (GPIO1_OR) & ~0x00008040)); + udelay (100000); + return 0; +} +#endif + +#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) +void ide_set_reset (int idereset) +{ + debug ("ide_reset(%d)\n", idereset); + if (idereset == 0) { + out32 (GPIO0_OR, (in32 (GPIO0_OR) | 0x00200000)); + } else { + out32 (GPIO0_OR, (in32 (GPIO0_OR) & ~0x00200000)); + } + udelay (10000); +} +#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */ + diff --git a/board/pcs440ep/u-boot.lds b/board/pcs440ep/u-boot.lds index 6ab476ab143..6506ccdcf36 100644 --- a/board/pcs440ep/u-boot.lds +++ b/board/pcs440ep/u-boot.lds @@ -65,6 +65,7 @@ SECTIONS { cpu/ppc4xx/start.o (.text) board/pcs440ep/init.o (.text) + lib_generic/sha1.o (.text) *(.text) *(.fixup) diff --git a/board/sc520_cdp/sc520_cdp.c b/board/sc520_cdp/sc520_cdp.c index b6add59bb48..f6f0e724437 100644 --- a/board/sc520_cdp/sc520_cdp.c +++ b/board/sc520_cdp/sc520_cdp.c @@ -507,6 +507,7 @@ int dram_init(void) void show_boot_progress(int val) { + if (val < -32) val = -1; /* let things compatible */ outb(val&0xff, 0x80); outb((val&0xff00)>>8, 0x680); } diff --git a/board/sc520_spunk/sc520_spunk.c b/board/sc520_spunk/sc520_spunk.c index ed226fd6423..d119a7d9977 100644 --- a/board/sc520_spunk/sc520_spunk.c +++ b/board/sc520_spunk/sc520_spunk.c @@ -507,6 +507,7 @@ void show_boot_progress(int val) { int version = read_mmcr_byte(SC520_SYSINFO); + if (val < -32) val = -1; /* let things compatible */ if (version == 0) { /* PIO31-PIO16 Data */ write_mmcr_word(SC520_PIODATA31_16, diff --git a/common/cmd_doc.c b/common/cmd_doc.c index ab375169531..4e624a2f3fa 100644 --- a/common/cmd_doc.c +++ b/common/cmd_doc.c @@ -216,6 +216,7 @@ int do_docboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) image_header_t *hdr; int rcode = 0; + SHOW_BOOT_PROGRESS (34); switch (argc) { case 1: addr = CFG_LOAD_ADDR; @@ -236,24 +237,27 @@ int do_docboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) break; default: printf ("Usage:\n%s\n", cmdtp->usage); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-35); return 1; } + SHOW_BOOT_PROGRESS (35); if (!boot_device) { puts ("\n** No boot device **\n"); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-36); return 1; } + SHOW_BOOT_PROGRESS (36); dev = simple_strtoul(boot_device, &ep, 16); if ((dev >= CFG_MAX_DOC_DEVICE) || (doc_dev_desc[dev].ChipID == DOC_ChipID_UNKNOWN)) { printf ("\n** Device %d not available\n", dev); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-37); return 1; } + SHOW_BOOT_PROGRESS (37); printf ("\nLoading from device %d: %s at 0x%lX (offset 0x%lX)\n", dev, doc_dev_desc[dev].name, doc_dev_desc[dev].physadr, @@ -262,9 +266,10 @@ int do_docboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) if (doc_rw (doc_dev_desc + dev, 1, offset, SECTORSIZE, NULL, (u_char *)addr)) { printf ("** Read error on %d\n", dev); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-38); return 1; } + SHOW_BOOT_PROGRESS (38); hdr = (image_header_t *)addr; @@ -276,16 +281,18 @@ int do_docboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) cnt -= SECTORSIZE; } else { puts ("\n** Bad Magic Number **\n"); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-39); return 1; } + SHOW_BOOT_PROGRESS (39); if (doc_rw (doc_dev_desc + dev, 1, offset + SECTORSIZE, cnt, NULL, (u_char *)(addr+SECTORSIZE))) { printf ("** Read error on %d\n", dev); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-40); return 1; } + SHOW_BOOT_PROGRESS (40); /* Loading ok, update default load address */ diff --git a/common/cmd_ide.c b/common/cmd_ide.c index e308474af71..c74cde96e89 100644 --- a/common/cmd_ide.c +++ b/common/cmd_ide.c @@ -185,6 +185,9 @@ static void input_data(int dev, ulong *sect_buf, int words); static void output_data(int dev, ulong *sect_buf, int words); static void ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len); +#ifndef CFG_ATA_PORT_ADDR +#define CFG_ATA_PORT_ADDR(port) (port) +#endif #ifdef CONFIG_ATAPI static void atapi_inquiry(block_dev_desc_t *dev_desc); @@ -382,6 +385,7 @@ int do_diskboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) image_header_t *hdr; int rcode = 0; + SHOW_BOOT_PROGRESS (41); switch (argc) { case 1: addr = CFG_LOAD_ADDR; @@ -397,44 +401,50 @@ int do_diskboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) break; default: printf ("Usage:\n%s\n", cmdtp->usage); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-42); return 1; } + SHOW_BOOT_PROGRESS (42); if (!boot_device) { puts ("\n** No boot device **\n"); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-43); return 1; } + SHOW_BOOT_PROGRESS (43); dev = simple_strtoul(boot_device, &ep, 16); if (ide_dev_desc[dev].type==DEV_TYPE_UNKNOWN) { printf ("\n** Device %d not available\n", dev); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-44); return 1; } + SHOW_BOOT_PROGRESS (44); if (*ep) { if (*ep != ':') { puts ("\n** Invalid boot device, use `dev[:part]' **\n"); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-45); return 1; } part = simple_strtoul(++ep, NULL, 16); } + SHOW_BOOT_PROGRESS (45); if (get_partition_info (&ide_dev_desc[dev], part, &info)) { - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-46); return 1; } + SHOW_BOOT_PROGRESS (46); if ((strncmp((char *)info.type, BOOT_PART_TYPE, sizeof(info.type)) != 0) && (strncmp((char *)info.type, BOOT_PART_COMP, sizeof(info.type)) != 0)) { printf ("\n** Invalid partition type \"%.32s\"" " (expect \"" BOOT_PART_TYPE "\")\n", info.type); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-47); return 1; } + SHOW_BOOT_PROGRESS (47); printf ("\nLoading from IDE device %d, partition %d: " "Name: %.32s Type: %.32s\n", @@ -445,26 +455,29 @@ int do_diskboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) if (ide_dev_desc[dev].block_read (dev, info.start, 1, (ulong *)addr) != 1) { printf ("** Read error on %d:%d\n", dev, part); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-48); return 1; } + SHOW_BOOT_PROGRESS (48); hdr = (image_header_t *)addr; if (ntohl(hdr->ih_magic) != IH_MAGIC) { printf("\n** Bad Magic Number **\n"); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-49); return 1; } + SHOW_BOOT_PROGRESS (49); checksum = ntohl(hdr->ih_hcrc); hdr->ih_hcrc = 0; if (crc32 (0, (uchar *)hdr, sizeof(image_header_t)) != checksum) { puts ("\n** Bad Header Checksum **\n"); - SHOW_BOOT_PROGRESS (-2); + SHOW_BOOT_PROGRESS (-50); return 1; } + SHOW_BOOT_PROGRESS (50); hdr->ih_hcrc = htonl(checksum); /* restore checksum for later use */ print_image_hdr (hdr); @@ -477,9 +490,10 @@ int do_diskboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) if (ide_dev_desc[dev].block_read (dev, info.start+1, cnt, (ulong *)(addr+info.blksz)) != cnt) { printf ("** Read error on %d:%d\n", dev, part); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-51); return 1; } + SHOW_BOOT_PROGRESS (51); /* Loading ok, update default load address */ @@ -807,13 +821,13 @@ ide_outb(int dev, int port, unsigned char val) /* Ensure I/O operations complete */ EIEIO; - *((uchar *)(ATA_CURR_BASE(dev)+port)) = val; + *((u16 *)(ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port))) = val; } #else /* ! __PPC__ */ static void __inline__ ide_outb(int dev, int port, unsigned char val) { - outb(val, ATA_CURR_BASE(dev)+port); + outb(val, ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)); } #endif /* __PPC__ */ @@ -825,7 +839,7 @@ ide_inb(int dev, int port) uchar val; /* Ensure I/O operations complete */ EIEIO; - val = *((uchar *)(ATA_CURR_BASE(dev)+port)); + val = *((u16 *)(ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port))); debug ("ide_inb (dev= %d, port= 0x%x) : @ 0x%08lx -> 0x%02x\n", dev, port, (ATA_CURR_BASE(dev)+port), val); return (val); @@ -834,7 +848,7 @@ ide_inb(int dev, int port) static unsigned char __inline__ ide_inb(int dev, int port) { - return inb(ATA_CURR_BASE(dev)+port); + return inb(ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)); } #endif /* __PPC__ */ @@ -891,6 +905,9 @@ input_swap_data(int dev, ulong *sect_buf, int words) #ifdef __MIPS__ *dbuf++ = swab16p((u16*)pbuf); *dbuf++ = swab16p((u16*)pbuf); +#elif defined(CONFIG_PCS440EP) + *dbuf++ = *pbuf; + *dbuf++ = *pbuf; #else *dbuf++ = ld_le16(pbuf); *dbuf++ = ld_le16(pbuf); @@ -930,10 +947,18 @@ output_data(int dev, ulong *sect_buf, int words) pbuf = (ushort *)(ATA_CURR_BASE(dev)+ATA_DATA_REG); dbuf = (ushort *)sect_buf; while (words--) { +#if defined(CONFIG_PCS440EP) + /* not tested, because CF was write protected */ + EIEIO; + *pbuf = ld_le16(dbuf++); + EIEIO; + *pbuf = ld_le16(dbuf++); +#else EIEIO; *pbuf = *dbuf++; EIEIO; *pbuf = *dbuf++; +#endif } #endif } @@ -981,10 +1006,17 @@ input_data(int dev, ulong *sect_buf, int words) debug("in input data base for read is %lx\n", (unsigned long) pbuf); while (words--) { +#if defined(CONFIG_PCS440EP) + EIEIO; + *dbuf++ = ld_le16(pbuf); + EIEIO; + *dbuf++ = ld_le16(pbuf); +#else EIEIO; *dbuf++ = *pbuf; EIEIO; *dbuf++ = *pbuf; +#endif } #endif } diff --git a/common/cmd_nand.c b/common/cmd_nand.c index b011b5e3ded..b088150f3bf 100644 --- a/common/cmd_nand.c +++ b/common/cmd_nand.c @@ -486,17 +486,19 @@ static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand, r = nand_read(nand, offset, &cnt, (u_char *) addr); if (r) { puts("** Read error\n"); - SHOW_BOOT_PROGRESS(-1); + SHOW_BOOT_PROGRESS(-56); return 1; } + SHOW_BOOT_PROGRESS(56); hdr = (image_header_t *) addr; if (ntohl(hdr->ih_magic) != IH_MAGIC) { printf("\n** Bad Magic Number 0x%x **\n", hdr->ih_magic); - SHOW_BOOT_PROGRESS(-1); + SHOW_BOOT_PROGRESS(-57); return 1; } + SHOW_BOOT_PROGRESS(57); print_image_hdr(hdr); @@ -505,9 +507,10 @@ static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand, r = nand_read(nand, offset, &cnt, (u_char *) addr); if (r) { puts("** Read error\n"); - SHOW_BOOT_PROGRESS(-1); + SHOW_BOOT_PROGRESS(-58); return 1; } + SHOW_BOOT_PROGRESS(58); /* Loading ok, update default load address */ @@ -559,6 +562,7 @@ int do_nandboot(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } #endif + SHOW_BOOT_PROGRESS(52); switch (argc) { case 1: addr = CFG_LOAD_ADDR; @@ -582,23 +586,26 @@ int do_nandboot(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) usage: #endif printf("Usage:\n%s\n", cmdtp->usage); - SHOW_BOOT_PROGRESS(-1); + SHOW_BOOT_PROGRESS(-53); return 1; } + SHOW_BOOT_PROGRESS(53); if (!boot_device) { puts("\n** No boot device **\n"); - SHOW_BOOT_PROGRESS(-1); + SHOW_BOOT_PROGRESS(-54); return 1; } + SHOW_BOOT_PROGRESS(54); idx = simple_strtoul(boot_device, NULL, 16); if (idx < 0 || idx >= CFG_MAX_NAND_DEVICE || !nand_info[idx].name) { printf("\n** Device %d not available\n", idx); - SHOW_BOOT_PROGRESS(-1); + SHOW_BOOT_PROGRESS(-55); return 1; } + SHOW_BOOT_PROGRESS(55); return nand_load_image(cmdtp, &nand_info[idx], offset, addr, argv[0]); } @@ -887,6 +894,7 @@ int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) ulong offset = 0; image_header_t *hdr; int rcode = 0; + SHOW_BOOT_PROGRESS(52); switch (argc) { case 1: addr = CFG_LOAD_ADDR; @@ -907,24 +915,27 @@ int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) break; default: printf ("Usage:\n%s\n", cmdtp->usage); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-53); return 1; } + SHOW_BOOT_PROGRESS(53); if (!boot_device) { puts ("\n** No boot device **\n"); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-54); return 1; } + SHOW_BOOT_PROGRESS(54); dev = simple_strtoul(boot_device, &ep, 16); if ((dev >= CFG_MAX_NAND_DEVICE) || (nand_dev_desc[dev].ChipID == NAND_ChipID_UNKNOWN)) { printf ("\n** Device %d not available\n", dev); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-55); return 1; } + SHOW_BOOT_PROGRESS(55); printf ("\nLoading from device %d: %s at 0x%lx (offset 0x%lx)\n", dev, nand_dev_desc[dev].name, nand_dev_desc[dev].IO_ADDR, @@ -933,9 +944,10 @@ int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) if (nand_legacy_rw (nand_dev_desc + dev, NANDRW_READ, offset, SECTORSIZE, NULL, (u_char *)addr)) { printf ("** Read error on %d\n", dev); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-56); return 1; } + SHOW_BOOT_PROGRESS(56); hdr = (image_header_t *)addr; @@ -947,17 +959,19 @@ int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) cnt -= SECTORSIZE; } else { printf ("\n** Bad Magic Number 0x%x **\n", ntohl(hdr->ih_magic)); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-57); return 1; } + SHOW_BOOT_PROGRESS(57); if (nand_legacy_rw (nand_dev_desc + dev, NANDRW_READ, offset + SECTORSIZE, cnt, NULL, (u_char *)(addr+SECTORSIZE))) { printf ("** Read error on %d\n", dev); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-58); return 1; } + SHOW_BOOT_PROGRESS(58); /* Loading ok, update default load address */ diff --git a/common/cmd_net.c b/common/cmd_net.c index 2cb2c5d34be..e9d552e2352 100644 --- a/common/cmd_net.c +++ b/common/cmd_net.c @@ -30,6 +30,13 @@ #if (CONFIG_COMMANDS & CFG_CMD_NET) +#ifdef CONFIG_SHOW_BOOT_PROGRESS +# include +extern void show_boot_progress (int val); +# define SHOW_BOOT_PROGRESS(arg) show_boot_progress (arg) +#else +# define SHOW_BOOT_PROGRESS(arg) +#endif extern int do_bootm (cmd_tbl_t *, int, int, char *[]); @@ -184,18 +191,25 @@ netboot_common (proto_t proto, cmd_tbl_t *cmdtp, int argc, char *argv[]) break; default: printf ("Usage:\n%s\n", cmdtp->usage); + SHOW_BOOT_PROGRESS(-80); return 1; } - if ((size = NetLoop(proto)) < 0) + SHOW_BOOT_PROGRESS(80); + if ((size = NetLoop(proto)) < 0) { + SHOW_BOOT_PROGRESS(-81); return 1; + } + SHOW_BOOT_PROGRESS(81); /* NetLoop ok, update environment */ netboot_update_env(); /* done if no file was loaded (no errors though) */ - if (size == 0) + if (size == 0) { + SHOW_BOOT_PROGRESS(-82); return 0; + } /* flush cache */ flush_cache(load_addr, size); @@ -208,14 +222,22 @@ netboot_common (proto_t proto, cmd_tbl_t *cmdtp, int argc, char *argv[]) printf ("Automatic boot of image at addr 0x%08lX ...\n", load_addr); + SHOW_BOOT_PROGRESS(82); rcode = do_bootm (cmdtp, 0, 1, local_args); } #ifdef CONFIG_AUTOSCRIPT if (((s = getenv("autoscript")) != NULL) && (strcmp(s,"yes") == 0)) { printf("Running autoscript at addr 0x%08lX ...\n", load_addr); + SHOW_BOOT_PROGRESS(83); rcode = autoscript (load_addr); } +#endif +#if defined(CONFIG_SHOW_BOOT_PROGRESS) + if (rcode < 0) + SHOW_BOOT_PROGRESS(-83); + else + SHOW_BOOT_PROGRESS(84); #endif return rcode; } diff --git a/common/cmd_reiser.c b/common/cmd_reiser.c index 09c86e66d76..d83c31ab3fe 100644 --- a/common/cmd_reiser.c +++ b/common/cmd_reiser.c @@ -90,7 +90,7 @@ int do_reiserls (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } if (!reiserfs_mount(part_length)) { - printf ("** Bad Reisefs partition or disk - %s %d:%d **\n", argv[1], dev, part); + printf ("** Bad Reiserfs partition or disk - %s %d:%d **\n", argv[1], dev, part); return 1; } @@ -183,7 +183,7 @@ int do_reiserload (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return 1; } - if (strncmp(info.type, BOOT_PART_TYPE, sizeof(info.type)) != 0) { + if (strncmp((char *)info.type, BOOT_PART_TYPE, sizeof(info.type)) != 0) { printf ("\n** Invalid partition type \"%.32s\"" " (expect \"" BOOT_PART_TYPE "\")\n", info.type); @@ -204,7 +204,7 @@ int do_reiserload (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } if (!reiserfs_mount(part_length)) { - printf ("** Bad Reisefs partition or disk - %s %d:%d **\n", argv[1], dev, part); + printf ("** Bad Reiserfs partition or disk - %s %d:%d **\n", argv[1], dev, part); return 1; } diff --git a/common/env_common.c b/common/env_common.c index eb33422af4b..0462cad6d72 100644 --- a/common/env_common.c +++ b/common/env_common.c @@ -232,7 +232,7 @@ void env_relocate (void) puts ("Using default environment\n\n"); #else puts ("*** Warning - bad CRC, using default environment\n\n"); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-60); #endif if (sizeof(default_environment) > ENV_SIZE) diff --git a/cpu/ppc4xx/44x_spd_ddr.c b/cpu/ppc4xx/44x_spd_ddr.c index c500d3f2421..8621aa00cf4 100644 --- a/cpu/ppc4xx/44x_spd_ddr.c +++ b/cpu/ppc4xx/44x_spd_ddr.c @@ -70,6 +70,13 @@ #define ONE_BILLION 1000000000 +#if defined(CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG) +extern void spd_ddr_init_hang (void); +#define HANG() spd_ddr_init_hang() +#else +#define HANG() hang() +#endif + /*----------------------------------------------------------------------------- | Memory Controller Options 0 +-----------------------------------------------------------------------------*/ @@ -467,7 +474,7 @@ static void get_spd_info(unsigned long *dimm_populated, if (dimm_found == FALSE) { printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n"); - hang(); + HANG(); } } @@ -490,7 +497,7 @@ static void check_mem_type(unsigned long *dimm_populated, dimm_num); printf("Only DDR SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + HANG(); break; } } @@ -510,7 +517,7 @@ static void check_volt_type(unsigned long *dimm_populated, if (voltage_type != 0x04) { printf("ERROR: DIMM %lu with unsupported voltage level.\n", dimm_num); - hang(); + HANG(); } else { debug("DIMM %lu voltage level supported.\n", dimm_num); } @@ -581,7 +588,7 @@ static void program_cfg0(unsigned long *dimm_populated, printf("WARNING: DIMM with datawidth of %lu bits.\n", data_width); printf("Only DIMMs with 32 or 64 bit datawidths supported.\n"); - hang(); + HANG(); } break; } @@ -769,7 +776,7 @@ static void program_tr0(unsigned long *dimm_populated, if ((tcyc_reg & 0x0F) >= 10) { printf("ERROR: Tcyc incorrect for DIMM in slot %lu\n", dimm_num); - hang(); + HANG(); } cycle_time_ns_x_10[cas_index] = @@ -849,7 +856,7 @@ static void program_tr0(unsigned long *dimm_populated, printf("ERROR: No supported CAS latency with the installed DIMMs.\n"); printf("Only CAS latencies of 2.0, 2.5, and 3.0 are supported.\n"); printf("Make sure the PLB speed is within the supported range.\n"); - hang(); + HANG(); } /* @@ -1008,6 +1015,7 @@ static int short_mem_test(void) */ for (i = 0; i < NUMMEMTESTS; i++) { for (j = 0; j < NUMMEMWORDS; j++) { +//printf("bank enabled base:%x\n", &membase[j]); membase[j] = test[i][j]; ppcDcbf((unsigned long)&(membase[j])); } @@ -1160,7 +1168,7 @@ static void program_tr1(void) */ if (window_found == FALSE) { printf("ERROR: Cannot determine a common read delay.\n"); - hang(); + HANG(); } /* @@ -1310,7 +1318,7 @@ static unsigned long program_bxcr(unsigned long *dimm_populated, printf("ERROR: Unsupported value for the banksize: %d.\n", bank_size_id); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + HANG(); } switch (num_col_addr) { @@ -1332,7 +1340,7 @@ static unsigned long program_bxcr(unsigned long *dimm_populated, printf("ERROR: Unsupported value for number of " "column addresses: %d.\n", num_col_addr); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + HANG(); } /* diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c index 48b9ee2f7e0..d748daee015 100644 --- a/cpu/ppc4xx/44x_spd_ddr2.c +++ b/cpu/ppc4xx/44x_spd_ddr2.c @@ -129,6 +129,13 @@ #define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */ #endif +#if defined(CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG) +extern void spd_ddr_init_hang (void); +#define HANG() spd_ddr_init_hang() +#else +#define HANG() hang() +#endif + /* Private Structure Definitions */ /* enum only to ease code for cas latency setting */ @@ -582,7 +589,7 @@ static void get_spd_info(unsigned long *dimm_populated, if (dimm_found == FALSE) { printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n"); - hang(); + HANG(); } } @@ -629,42 +636,42 @@ static void check_mem_type(unsigned long *dimm_populated, "slot %d.\n", (unsigned int)dimm_num); printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + HANG(); break; case 2: printf("ERROR: EDO DIMM detected in slot %d.\n", (unsigned int)dimm_num); printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + HANG(); break; case 3: printf("ERROR: Pipelined Nibble DIMM detected in slot %d.\n", (unsigned int)dimm_num); printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + HANG(); break; case 4: printf("ERROR: SDRAM DIMM detected in slot %d.\n", (unsigned int)dimm_num); printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + HANG(); break; case 5: printf("ERROR: Multiplexed ROM DIMM detected in slot %d.\n", (unsigned int)dimm_num); printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + HANG(); break; case 6: printf("ERROR: SGRAM DIMM detected in slot %d.\n", (unsigned int)dimm_num); printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + HANG(); break; case 7: debug("DIMM slot %d: DDR1 SDRAM detected\n", dimm_num); @@ -679,7 +686,7 @@ static void check_mem_type(unsigned long *dimm_populated, (unsigned int)dimm_num); printf("Only DDR1 and DDR2 SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + HANG(); break; } } @@ -689,7 +696,7 @@ static void check_mem_type(unsigned long *dimm_populated, && (dimm_populated[dimm_num] != SDRAM_NONE) && (dimm_populated[dimm_num-1] != dimm_populated[dimm_num])) { printf("ERROR: DIMM's DDR1 and DDR2 type can not be mixed.\n"); - hang(); + HANG(); } } } @@ -764,7 +771,7 @@ static void check_frequency(unsigned long *dimm_populated, (unsigned int)(calc_cycle_time*10)); printf("Replace the DIMM, or change DDR frequency via " "strapping bits.\n\n"); - hang(); + HANG(); } } } @@ -796,7 +803,7 @@ static void check_rank_number(unsigned long *dimm_populated, "slot %d is not supported.\n", dimm_rank, dimm_num); printf("Only %d ranks are supported for all DIMM.\n", MAXRANKS); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + HANG(); } else total_rank += dimm_rank; } @@ -805,7 +812,7 @@ static void check_rank_number(unsigned long *dimm_populated, "for all slots.\n", (unsigned int)total_rank); printf("Only %d ranks are supported for all DIMM.\n", MAXRANKS); printf("Remove one of the DIMM modules.\n\n"); - hang(); + HANG(); } } } @@ -830,28 +837,28 @@ static void check_voltage_type(unsigned long *dimm_populated, printf("This DIMM is 5.0 Volt/TTL.\n"); printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n", (unsigned int)dimm_num); - hang(); + HANG(); break; case 0x01: printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n"); printf("This DIMM is LVTTL.\n"); printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n", (unsigned int)dimm_num); - hang(); + HANG(); break; case 0x02: printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n"); printf("This DIMM is 1.5 Volt.\n"); printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n", (unsigned int)dimm_num); - hang(); + HANG(); break; case 0x03: printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n"); printf("This DIMM is 3.3 Volt/TTL.\n"); printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n", (unsigned int)dimm_num); - hang(); + HANG(); break; case 0x04: /* 2.5 Voltage only for DDR1 */ @@ -863,7 +870,7 @@ static void check_voltage_type(unsigned long *dimm_populated, printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n"); printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n", (unsigned int)dimm_num); - hang(); + HANG(); break; } } @@ -1006,13 +1013,13 @@ static void program_copt1(unsigned long *dimm_populated, if ((dimm_populated[0] != SDRAM_NONE) && (dimm_populated[1] != SDRAM_NONE)) { if (buf0 != buf1) { printf("ERROR: DIMM's buffered/unbuffered, registered, clocking don't match.\n"); - hang(); + HANG(); } } if ((dimm_64bit == TRUE) && (dimm_32bit == TRUE)) { printf("ERROR: Cannot mix 32 bit and 64 bit DDR-SDRAM DIMMs together.\n"); - hang(); + HANG(); } else if ((dimm_64bit == TRUE) && (dimm_32bit == FALSE)) { mcopt1 |= SDRAM_MCOPT1_DMWD_64; @@ -1020,7 +1027,7 @@ static void program_copt1(unsigned long *dimm_populated, mcopt1 |= SDRAM_MCOPT1_DMWD_32; } else { printf("ERROR: Please install only 32 or 64 bit DDR-SDRAM DIMMs.\n\n"); - hang(); + HANG(); } if (ecc_enabled == TRUE) @@ -1209,7 +1216,7 @@ static void program_initplr(unsigned long *dimm_populated, break; default: printf("ERROR: ucode error on selected_cas value %d", selected_cas); - hang(); + HANG(); break; } @@ -1241,7 +1248,7 @@ static void program_initplr(unsigned long *dimm_populated, break; default: printf("ERROR: write recovery not support (%d)", write_recovery); - hang(); + HANG(); break; } #else @@ -1259,7 +1266,7 @@ static void program_initplr(unsigned long *dimm_populated, ods = ODS_REDUCED; } else { printf("ERROR: Unsupported number of DIMM's (%d)", total_dimm); - hang(); + HANG(); } mr = CMD_EMR | SELECT_MR | BURST_LEN_4 | wr | cas; @@ -1284,7 +1291,7 @@ static void program_initplr(unsigned long *dimm_populated, mtsdram(SDRAM_INITPLR13, 0x80800000 | emr); /* EMR OCD Exit */ } else { printf("ERROR: ucode error as unknown DDR type in program_initplr"); - hang(); + HANG(); } } @@ -1389,7 +1396,7 @@ static void program_mode(unsigned long *dimm_populated, } else { printf("ERROR: SPD reported Tcyc is incorrect for DIMM " "in slot %d\n", (unsigned int)dimm_num); - hang(); + HANG(); } } else { /* Convert from hex to decimal */ @@ -1526,7 +1533,7 @@ static void program_mode(unsigned long *dimm_populated, printf("ERROR: Cannot find a supported CAS latency with the installed DIMMs.\n"); printf("Only DIMMs DDR1 with CAS latencies of 2.0, 2.5, and 3.0 are supported.\n"); printf("Make sure the PLB speed is within the supported range of the DIMMs.\n\n"); - hang(); + HANG(); } } else { /* DDR2 */ debug("cas_3_0_available=%d\n", cas_3_0_available); @@ -1549,7 +1556,7 @@ static void program_mode(unsigned long *dimm_populated, cas_3_0_available, cas_4_0_available, cas_5_0_available); printf("sdram_freq=%d cycle3=%d cycle4=%d cycle5=%d\n\n", sdram_freq, cycle_3_0_clk, cycle_4_0_clk, cycle_5_0_clk); - hang(); + HANG(); } } @@ -1658,7 +1665,7 @@ static void program_rtr(unsigned long *dimm_populated, printf("ERROR: DIMM %d unsupported refresh rate/type.\n", (unsigned int)dimm_num); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + HANG(); break; } @@ -2066,7 +2073,7 @@ static void program_bxcf(unsigned long *dimm_populated, printf("ERROR: Unsupported value for number of " "column addresses: %d.\n", (unsigned int)num_col_addr); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + HANG(); } } @@ -2148,7 +2155,7 @@ static void program_memory_queue(unsigned long *dimm_populated, printf("ERROR: Unsupported value for the banksize: %d.\n", (unsigned int)rank_size_id); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + HANG(); } if ((dimm_populated[dimm_num] != SDRAM_NONE) && (dimm_num == 1)) @@ -2693,7 +2700,7 @@ calibration_loop: printf("\nERROR: Cannot determine a common read delay for the " "DIMM(s) installed.\n"); debug("%s[%d] ERROR : \n", __FUNCTION__,__LINE__); - hang(); + HANG(); } blank_string(strlen(str)); @@ -2849,7 +2856,7 @@ static void test(void) if (window_found == FALSE) { printf("ERROR: Cannot determine a common read delay for the " "DIMM(s) installed.\n"); - hang(); + HANG(); } /*------------------------------------------------------------------ diff --git a/disk/part.c b/disk/part.c index 255b1406982..6ab5857073c 100755 --- a/disk/part.c +++ b/disk/part.c @@ -180,7 +180,6 @@ void dev_print (block_dev_desc_t *dev_desc) (CONFIG_COMMANDS & CFG_CMD_SCSI) || \ (CONFIG_COMMANDS & CFG_CMD_USB) || \ defined(CONFIG_MMC) || \ - (defined(CONFIG_MMC) && defined(CONFIG_LPC2292)) || \ defined(CONFIG_SYSTEMACE) ) #if defined(CONFIG_MAC_PARTITION) || \ @@ -223,7 +222,7 @@ void init_part (block_dev_desc_t * dev_desc) int get_partition_info (block_dev_desc_t *dev_desc, int part , disk_partition_t *info) { - switch (dev_desc->part_type) { + switch (dev_desc->part_type) { #ifdef CONFIG_MAC_PARTITION case PART_TYPE_MAC: if (get_partition_info_mac(dev_desc,part,info) == 0) { diff --git a/fs/fat/fat.c b/fs/fat/fat.c index 3007608360a..21a00b80d41 100755 --- a/fs/fat/fat.c +++ b/fs/fat/fat.c @@ -70,10 +70,11 @@ int fat_register_device(block_dev_desc_t *dev_desc, int part_no) { unsigned char buffer[SECTOR_SIZE]; + disk_partition_t info; if (!dev_desc->block_read) return -1; - cur_dev=dev_desc; + cur_dev = dev_desc; /* check if we have a MBR (on floppies we have only a PBR) */ if (dev_desc->block_read (dev_desc->dev, 0, 1, (ulong *) buffer) != 1) { printf ("** Can't read from device %d **\n", dev_desc->dev); @@ -84,36 +85,39 @@ fat_register_device(block_dev_desc_t *dev_desc, int part_no) /* no signature found */ return -1; } - if(!strncmp((char *)&buffer[DOS_FS_TYPE_OFFSET],"FAT",3)) { - /* ok, we assume we are on a PBR only */ - cur_part = 1; - part_offset=0; - } - else { #if ((CONFIG_COMMANDS & CFG_CMD_IDE) || \ (CONFIG_COMMANDS & CFG_CMD_SCSI) || \ (CONFIG_COMMANDS & CFG_CMD_USB) || \ - (defined(CONFIG_MMC) && defined(CONFIG_LPC2292)) || \ + (defined(CONFIG_MMC)) || \ defined(CONFIG_SYSTEMACE) ) - disk_partition_t info; - if(!get_partition_info(dev_desc, part_no, &info)) { - part_offset = info.start; - cur_part = part_no; - } - else { - printf ("** Partition %d not valid on device %d **\n",part_no,dev_desc->dev); - return -1; - } + /* First we assume, there is a MBR */ + if (!get_partition_info (dev_desc, part_no, &info)) { + part_offset = info.start; + cur_part = part_no; + } else if (!strncmp((char *)&buffer[DOS_FS_TYPE_OFFSET], "FAT", 3)) { + /* ok, we assume we are on a PBR only */ + cur_part = 1; + part_offset = 0; + } else { + printf ("** Partition %d not valid on device %d **\n", part_no, dev_desc->dev); + return -1; + } #else + if(!strncmp((char *)&buffer[DOS_FS_TYPE_OFFSET],"FAT",3)) { + /* ok, we assume we are on a PBR only */ + cur_part = 1; + part_offset = 0; + info.start = part_offset; + } else { /* FIXME we need to determine the start block of the * partition where the DOS FS resides. This can be done * by using the get_partition_info routine. For this * purpose the libpart must be included. */ - part_offset=32; + part_offset = 32; cur_part = 1; -#endif } +#endif return 0; } diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h index 23bdfc8dfb9..d4718088213 100644 --- a/include/configs/pcs440ep.h +++ b/include/configs/pcs440ep.h @@ -105,19 +105,27 @@ #ifdef CFG_ENV_IS_IN_FLASH #define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) -#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ + +#define CONFIG_ENV_OVERWRITE 1 /* Address and size of Redundant Environment Sector */ #define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) #endif /* CFG_ENV_IS_IN_FLASH */ +#define ENV_NAME_REVLEV "revision_level" +#define ENV_NAME_SOLDER "solder_switch" +#define ENV_NAME_DIP "dip" + /*----------------------------------------------------------------------- * DDR SDRAM *----------------------------------------------------------------------*/ #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */ #undef CONFIG_DDR_ECC /* don't use ECC */ #define SPD_EEPROM_ADDRESS {0x50} +#define CONFIG_PROG_SDRAM_TLB 1 +#define CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG 1 /*----------------------------------------------------------------------- * I2C @@ -142,6 +150,8 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "hostname=pcs440ep\0" \ + "use_eeprom_ethaddr=default\0" \ + "cs_test=off\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=${serverip}:${rootpath}\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ @@ -172,6 +182,36 @@ #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #endif +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +/* check U-Boot image with SHA1 sum */ +#define CONFIG_SHA1_CHECK_UB_IMG 1 +#define CONFIG_SHA1_START CFG_MONITOR_BASE +#define CONFIG_SHA1_LEN CFG_MONITOR_LEN + +/*----------------------------------------------------------------------- + * Definitions for status LED + */ +#define CONFIG_STATUS_LED 1 /* Status LED enabled */ +#define CONFIG_BOARD_SPECIFIC_LED 1 + +#define STATUS_LED_BIT 0x08 /* LED 1 is on GPIO_PPC_1 */ +#define STATUS_LED_PERIOD ((CFG_HZ / 2) / 5) /* blink at 5 Hz */ +#define STATUS_LED_STATE STATUS_LED_OFF +#define STATUS_LED_BIT1 0x04 /* LED 2 is on GPIO_PPC_2 */ +#define STATUS_LED_PERIOD1 ((CFG_HZ / 2) / 5) /* blink at 5 Hz */ +#define STATUS_LED_STATE1 STATUS_LED_ON +#define STATUS_LED_BIT2 0x02 /* LED 3 is on GPIO_PPC_3 */ +#define STATUS_LED_PERIOD2 ((CFG_HZ / 2) / 5) /* blink at 5 Hz */ +#define STATUS_LED_STATE2 STATUS_LED_OFF +#define STATUS_LED_BIT3 0x01 /* LED 4 is on GPIO_PPC_4 */ +#define STATUS_LED_PERIOD3 ((CFG_HZ / 2) / 5) /* blink at 5 Hz */ +#define STATUS_LED_STATE3 STATUS_LED_OFF + +#define CONFIG_SHOW_BOOT_PROGRESS 1 + #define CONFIG_BAUDRATE 115200 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ @@ -213,7 +253,10 @@ CFG_CMD_DIAG | \ CFG_CMD_EEPROM | \ CFG_CMD_ELF | \ + CFG_CMD_EXT2 | \ + CFG_CMD_FAT | \ CFG_CMD_I2C | \ + CFG_CMD_IDE | \ CFG_CMD_IRQ | \ CFG_CMD_MII | \ CFG_CMD_NET | \ @@ -221,9 +264,8 @@ CFG_CMD_PCI | \ CFG_CMD_PING | \ CFG_CMD_REGINFO | \ + CFG_CMD_REISER | \ CFG_CMD_SDRAM | \ - CFG_CMD_EXT2 | \ - CFG_CMD_FAT | \ CFG_CMD_USB ) @@ -410,4 +452,39 @@ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif +/*----------------------------------------------------------------------- + * IDE/ATA stuff Supports IDE harddisk + *----------------------------------------------------------------------- + */ + +#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ + +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CFG_IDE_MAXDEVICE 1 /* max. 2 drives per IDE bus */ + +#define CONFIG_IDE_PREINIT 1 +#define CONFIG_IDE_RESET 1 + +#define CFG_ATA_IDE0_OFFSET 0x0000 + +#define CFG_ATA_BASE_ADDR CFG_CF1 + +/* Offset for data I/O */ +#define CFG_ATA_DATA_OFFSET 0 + +/* Offset for normal register accesses */ +#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET) + +/* Offset for alternate registers */ +#define CFG_ATA_ALT_OFFSET (0x0000) + +/* This addresses need to be shifted one place to the left + * ( bus per_addr 20 -30 is connectsd on CF bus A10-A0) + * This values are shifted + */ +#define CFG_ATA_PORT_ADDR(port) ((port) << 1) + #endif /* __CONFIG_H */ diff --git a/include/sha1.h b/include/sha1.h new file mode 100644 index 00000000000..3030f2975f2 --- /dev/null +++ b/include/sha1.h @@ -0,0 +1,115 @@ +/** + * \file sha1.h + * based from http://xyssl.org/code/source/sha1/ + * FIPS-180-1 compliant SHA-1 implementation + * + * Copyright (C) 2003-2006 Christophe Devine + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License, version 2.1 as published by the Free Software Foundation. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ +/* + * The SHA-1 standard was published by NIST in 1993. + * + * http://www.itl.nist.gov/fipspubs/fip180-1.htm + */ +#ifndef _SHA1_H +#define _SHA1_H + +#ifdef __cplusplus +extern "C" { +#endif + +#define SHA1_SUM_POS -0x20 +#define SHA1_SUM_LEN 20 + +/** + * \brief SHA-1 context structure + */ +typedef struct +{ + unsigned long total[2]; /*!< number of bytes processed */ + unsigned long state[5]; /*!< intermediate digest state */ + unsigned char buffer[64]; /*!< data block being processed */ +} +sha1_context; + +/** + * \brief SHA-1 context setup + * + * \param ctx SHA-1 context to be initialized + */ +void sha1_starts( sha1_context *ctx ); + +/** + * \brief SHA-1 process buffer + * + * \param ctx SHA-1 context + * \param input buffer holding the data + * \param ilen length of the input data + */ +void sha1_update( sha1_context *ctx, unsigned char *input, int ilen ); + +/** + * \brief SHA-1 final digest + * + * \param ctx SHA-1 context + * \param output SHA-1 checksum result + */ +void sha1_finish( sha1_context *ctx, unsigned char output[20] ); + +/** + * \brief Output = SHA-1( input buffer ) + * + * \param input buffer holding the data + * \param ilen length of the input data + * \param output SHA-1 checksum result + */ +void sha1_csum( unsigned char *input, int ilen, + unsigned char output[20] ); + +/** + * \brief Output = SHA-1( file contents ) + * + * \param path input file name + * \param output SHA-1 checksum result + * \return 0 if successful, or 1 if fopen failed + */ +int sha1_file( char *path, unsigned char output[20] ); + +/** + * \brief Output = HMAC-SHA-1( input buffer, hmac key ) + * + * \param key HMAC secret key + * \param keylen length of the HMAC key + * \param input buffer holding the data + * \param ilen length of the input data + * \param output HMAC-SHA-1 result + */ +void sha1_hmac( unsigned char *key, int keylen, + unsigned char *input, int ilen, + unsigned char output[20] ); + +/** + * \brief Checkup routine + * + * \return 0 if successful, or 1 if the test failed + */ +int sha1_self_test( void ); + +#ifdef __cplusplus +} +#endif + +#endif /* sha1.h */ diff --git a/include/status_led.h b/include/status_led.h index 71a202fe36e..a6468142557 100644 --- a/include/status_led.h +++ b/include/status_led.h @@ -367,6 +367,13 @@ void status_led_set (int led, int state); #define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ +#elif defined(CONFIG_BOARD_SPECIFIC_LED) +/* led_id_t is unsigned long mask */ +typedef unsigned long led_id_t; + +extern void __led_toggle (led_id_t mask); +extern void __led_init (led_id_t mask, int state); +extern void __led_set (led_id_t mask, int state); #else # error Status LED configuration missing #endif diff --git a/lib_generic/Makefile b/lib_generic/Makefile index f012cab7d8a..b2091c5e78b 100644 --- a/lib_generic/Makefile +++ b/lib_generic/Makefile @@ -27,7 +27,7 @@ LIB = $(obj)libgeneric.a COBJS = bzlib.o bzlib_crctable.o bzlib_decompress.o \ bzlib_randtable.o bzlib_huffman.o \ - crc32.o ctype.o display_options.o ldiv.o \ + crc32.o ctype.o display_options.o ldiv.o sha1.o \ string.o vsprintf.o zlib.o SRCS := $(COBJS:.o=.c) diff --git a/lib_generic/sha1.c b/lib_generic/sha1.c new file mode 100644 index 00000000000..0522d7ce67f --- /dev/null +++ b/lib_generic/sha1.c @@ -0,0 +1,430 @@ +/* + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * based on: + * FIPS-180-1 compliant SHA-1 implementation + * + * Copyright (C) 2003-2006 Christophe Devine + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License, version 2.1 as published by the Free Software Foundation. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ +/* + * The SHA-1 standard was published by NIST in 1993. + * + * http://www.itl.nist.gov/fipspubs/fip180-1.htm + */ + +#ifndef _CRT_SECURE_NO_DEPRECATE +#define _CRT_SECURE_NO_DEPRECATE 1 +#endif + +#include +#include "sha1.h" + +/* + * 32-bit integer manipulation macros (big endian) + */ +#ifndef GET_UINT32_BE +#define GET_UINT32_BE(n,b,i) \ +{ \ + (n) = ( (unsigned long) (b)[(i) ] << 24 ) \ + | ( (unsigned long) (b)[(i) + 1] << 16 ) \ + | ( (unsigned long) (b)[(i) + 2] << 8 ) \ + | ( (unsigned long) (b)[(i) + 3] ); \ +} +#endif +#ifndef PUT_UINT32_BE +#define PUT_UINT32_BE(n,b,i) \ +{ \ + (b)[(i) ] = (unsigned char) ( (n) >> 24 ); \ + (b)[(i) + 1] = (unsigned char) ( (n) >> 16 ); \ + (b)[(i) + 2] = (unsigned char) ( (n) >> 8 ); \ + (b)[(i) + 3] = (unsigned char) ( (n) ); \ +} +#endif + +/* + * SHA-1 context setup + */ +void sha1_starts( sha1_context *ctx ) +{ + ctx->total[0] = 0; + ctx->total[1] = 0; + + ctx->state[0] = 0x67452301; + ctx->state[1] = 0xEFCDAB89; + ctx->state[2] = 0x98BADCFE; + ctx->state[3] = 0x10325476; + ctx->state[4] = 0xC3D2E1F0; +} + +static void sha1_process( sha1_context *ctx, unsigned char data[64] ) +{ + unsigned long temp, W[16], A, B, C, D, E; + + GET_UINT32_BE( W[0], data, 0 ); + GET_UINT32_BE( W[1], data, 4 ); + GET_UINT32_BE( W[2], data, 8 ); + GET_UINT32_BE( W[3], data, 12 ); + GET_UINT32_BE( W[4], data, 16 ); + GET_UINT32_BE( W[5], data, 20 ); + GET_UINT32_BE( W[6], data, 24 ); + GET_UINT32_BE( W[7], data, 28 ); + GET_UINT32_BE( W[8], data, 32 ); + GET_UINT32_BE( W[9], data, 36 ); + GET_UINT32_BE( W[10], data, 40 ); + GET_UINT32_BE( W[11], data, 44 ); + GET_UINT32_BE( W[12], data, 48 ); + GET_UINT32_BE( W[13], data, 52 ); + GET_UINT32_BE( W[14], data, 56 ); + GET_UINT32_BE( W[15], data, 60 ); + +#define S(x,n) ((x << n) | ((x & 0xFFFFFFFF) >> (32 - n))) + +#define R(t) \ +( \ + temp = W[(t - 3) & 0x0F] ^ W[(t - 8) & 0x0F] ^ \ + W[(t - 14) & 0x0F] ^ W[ t & 0x0F], \ + ( W[t & 0x0F] = S(temp,1) ) \ +) + +#define P(a,b,c,d,e,x) \ +{ \ + e += S(a,5) + F(b,c,d) + K + x; b = S(b,30); \ +} + + A = ctx->state[0]; + B = ctx->state[1]; + C = ctx->state[2]; + D = ctx->state[3]; + E = ctx->state[4]; + +#define F(x,y,z) (z ^ (x & (y ^ z))) +#define K 0x5A827999 + + P( A, B, C, D, E, W[0] ); + P( E, A, B, C, D, W[1] ); + P( D, E, A, B, C, W[2] ); + P( C, D, E, A, B, W[3] ); + P( B, C, D, E, A, W[4] ); + P( A, B, C, D, E, W[5] ); + P( E, A, B, C, D, W[6] ); + P( D, E, A, B, C, W[7] ); + P( C, D, E, A, B, W[8] ); + P( B, C, D, E, A, W[9] ); + P( A, B, C, D, E, W[10] ); + P( E, A, B, C, D, W[11] ); + P( D, E, A, B, C, W[12] ); + P( C, D, E, A, B, W[13] ); + P( B, C, D, E, A, W[14] ); + P( A, B, C, D, E, W[15] ); + P( E, A, B, C, D, R(16) ); + P( D, E, A, B, C, R(17) ); + P( C, D, E, A, B, R(18) ); + P( B, C, D, E, A, R(19) ); + +#undef K +#undef F + +#define F(x,y,z) (x ^ y ^ z) +#define K 0x6ED9EBA1 + + P( A, B, C, D, E, R(20) ); + P( E, A, B, C, D, R(21) ); + P( D, E, A, B, C, R(22) ); + P( C, D, E, A, B, R(23) ); + P( B, C, D, E, A, R(24) ); + P( A, B, C, D, E, R(25) ); + P( E, A, B, C, D, R(26) ); + P( D, E, A, B, C, R(27) ); + P( C, D, E, A, B, R(28) ); + P( B, C, D, E, A, R(29) ); + P( A, B, C, D, E, R(30) ); + P( E, A, B, C, D, R(31) ); + P( D, E, A, B, C, R(32) ); + P( C, D, E, A, B, R(33) ); + P( B, C, D, E, A, R(34) ); + P( A, B, C, D, E, R(35) ); + P( E, A, B, C, D, R(36) ); + P( D, E, A, B, C, R(37) ); + P( C, D, E, A, B, R(38) ); + P( B, C, D, E, A, R(39) ); + +#undef K +#undef F + +#define F(x,y,z) ((x & y) | (z & (x | y))) +#define K 0x8F1BBCDC + + P( A, B, C, D, E, R(40) ); + P( E, A, B, C, D, R(41) ); + P( D, E, A, B, C, R(42) ); + P( C, D, E, A, B, R(43) ); + P( B, C, D, E, A, R(44) ); + P( A, B, C, D, E, R(45) ); + P( E, A, B, C, D, R(46) ); + P( D, E, A, B, C, R(47) ); + P( C, D, E, A, B, R(48) ); + P( B, C, D, E, A, R(49) ); + P( A, B, C, D, E, R(50) ); + P( E, A, B, C, D, R(51) ); + P( D, E, A, B, C, R(52) ); + P( C, D, E, A, B, R(53) ); + P( B, C, D, E, A, R(54) ); + P( A, B, C, D, E, R(55) ); + P( E, A, B, C, D, R(56) ); + P( D, E, A, B, C, R(57) ); + P( C, D, E, A, B, R(58) ); + P( B, C, D, E, A, R(59) ); + +#undef K +#undef F + +#define F(x,y,z) (x ^ y ^ z) +#define K 0xCA62C1D6 + + P( A, B, C, D, E, R(60) ); + P( E, A, B, C, D, R(61) ); + P( D, E, A, B, C, R(62) ); + P( C, D, E, A, B, R(63) ); + P( B, C, D, E, A, R(64) ); + P( A, B, C, D, E, R(65) ); + P( E, A, B, C, D, R(66) ); + P( D, E, A, B, C, R(67) ); + P( C, D, E, A, B, R(68) ); + P( B, C, D, E, A, R(69) ); + P( A, B, C, D, E, R(70) ); + P( E, A, B, C, D, R(71) ); + P( D, E, A, B, C, R(72) ); + P( C, D, E, A, B, R(73) ); + P( B, C, D, E, A, R(74) ); + P( A, B, C, D, E, R(75) ); + P( E, A, B, C, D, R(76) ); + P( D, E, A, B, C, R(77) ); + P( C, D, E, A, B, R(78) ); + P( B, C, D, E, A, R(79) ); + +#undef K +#undef F + + ctx->state[0] += A; + ctx->state[1] += B; + ctx->state[2] += C; + ctx->state[3] += D; + ctx->state[4] += E; +} + +/* + * SHA-1 process buffer + */ +void sha1_update( sha1_context *ctx, unsigned char *input, int ilen ) +{ + int fill; + unsigned long left; + + if( ilen <= 0 ) + return; + + left = ctx->total[0] & 0x3F; + fill = 64 - left; + + ctx->total[0] += ilen; + ctx->total[0] &= 0xFFFFFFFF; + + if( ctx->total[0] < (unsigned long) ilen ) + ctx->total[1]++; + + if( left && ilen >= fill ) + { + memcpy( (void *) (ctx->buffer + left), + (void *) input, fill ); + sha1_process( ctx, ctx->buffer ); + input += fill; + ilen -= fill; + left = 0; + } + + while( ilen >= 64 ) + { + sha1_process( ctx, input ); + input += 64; + ilen -= 64; + } + + if( ilen > 0 ) + { + memcpy( (void *) (ctx->buffer + left), + (void *) input, ilen ); + } +} + +static const unsigned char sha1_padding[64] = +{ + 0x80, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 +}; + +/* + * SHA-1 final digest + */ +void sha1_finish( sha1_context *ctx, unsigned char output[20] ) +{ + unsigned long last, padn; + unsigned long high, low; + unsigned char msglen[8]; + + high = ( ctx->total[0] >> 29 ) + | ( ctx->total[1] << 3 ); + low = ( ctx->total[0] << 3 ); + + PUT_UINT32_BE( high, msglen, 0 ); + PUT_UINT32_BE( low, msglen, 4 ); + + last = ctx->total[0] & 0x3F; + padn = ( last < 56 ) ? ( 56 - last ) : ( 120 - last ); + + sha1_update( ctx, (unsigned char *) sha1_padding, padn ); + sha1_update( ctx, msglen, 8 ); + + PUT_UINT32_BE( ctx->state[0], output, 0 ); + PUT_UINT32_BE( ctx->state[1], output, 4 ); + PUT_UINT32_BE( ctx->state[2], output, 8 ); + PUT_UINT32_BE( ctx->state[3], output, 12 ); + PUT_UINT32_BE( ctx->state[4], output, 16 ); +} + +/* + * Output = SHA-1( input buffer ) + */ +void sha1_csum( unsigned char *input, int ilen, + unsigned char output[20] ) +{ + sha1_context ctx; + + sha1_starts( &ctx ); + sha1_update( &ctx, input, ilen ); + sha1_finish( &ctx, output ); +} + +/* + * Output = HMAC-SHA-1( input buffer, hmac key ) + */ +void sha1_hmac( unsigned char *key, int keylen, + unsigned char *input, int ilen, + unsigned char output[20] ) +{ + int i; + sha1_context ctx; + unsigned char k_ipad[64]; + unsigned char k_opad[64]; + unsigned char tmpbuf[20]; + + memset( k_ipad, 0x36, 64 ); + memset( k_opad, 0x5C, 64 ); + + for( i = 0; i < keylen; i++ ) + { + if( i >= 64 ) break; + + k_ipad[i] ^= key[i]; + k_opad[i] ^= key[i]; + } + + sha1_starts( &ctx ); + sha1_update( &ctx, k_ipad, 64 ); + sha1_update( &ctx, input, ilen ); + sha1_finish( &ctx, tmpbuf ); + + sha1_starts( &ctx ); + sha1_update( &ctx, k_opad, 64 ); + sha1_update( &ctx, tmpbuf, 20 ); + sha1_finish( &ctx, output ); + + memset( k_ipad, 0, 64 ); + memset( k_opad, 0, 64 ); + memset( tmpbuf, 0, 20 ); + memset( &ctx, 0, sizeof( sha1_context ) ); +} + +static const char _sha1_src[] = "_sha1_src"; + +#ifdef SELF_TEST +/* + * FIPS-180-1 test vectors + */ +static const char sha1_test_str[3][57] = +{ + { "abc" }, + { "abcdbcdecdefdefgefghfghighijhijkijkljklmklmnlmnomnopnopq" }, + { "" } +}; + +static const unsigned char sha1_test_sum[3][20] = +{ + { 0xA9, 0x99, 0x3E, 0x36, 0x47, 0x06, 0x81, 0x6A, 0xBA, 0x3E, + 0x25, 0x71, 0x78, 0x50, 0xC2, 0x6C, 0x9C, 0xD0, 0xD8, 0x9D }, + { 0x84, 0x98, 0x3E, 0x44, 0x1C, 0x3B, 0xD2, 0x6E, 0xBA, 0xAE, + 0x4A, 0xA1, 0xF9, 0x51, 0x29, 0xE5, 0xE5, 0x46, 0x70, 0xF1 }, + { 0x34, 0xAA, 0x97, 0x3C, 0xD4, 0xC4, 0xDA, 0xA4, 0xF6, 0x1E, + 0xEB, 0x2B, 0xDB, 0xAD, 0x27, 0x31, 0x65, 0x34, 0x01, 0x6F } +}; + +/* + * Checkup routine + */ +int sha1_self_test( void ) +{ + int i, j; + unsigned char buf[1000]; + unsigned char sha1sum[20]; + sha1_context ctx; + + for( i = 0; i < 3; i++ ) + { + printf( " SHA-1 test #%d: ", i + 1 ); + + sha1_starts( &ctx ); + + if( i < 2 ) + sha1_update( &ctx, (unsigned char *) sha1_test_str[i], + strlen( sha1_test_str[i] ) ); + else + { + memset( buf, 'a', 1000 ); + for( j = 0; j < 1000; j++ ) + sha1_update( &ctx, buf, 1000 ); + } + + sha1_finish( &ctx, sha1sum ); + + if( memcmp( sha1sum, sha1_test_sum[i], 20 ) != 0 ) + { + printf( "failed\n" ); + return( 1 ); + } + + printf( "passed\n" ); + } + + printf( "\n" ); + return( 0 ); +} +#else +int sha1_self_test( void ) +{ + return( 0 ); +} +#endif diff --git a/lib_ppc/board.c b/lib_ppc/board.c index c4fc5805ab6..f5d18fa9f6b 100644 --- a/lib_ppc/board.c +++ b/lib_ppc/board.c @@ -896,7 +896,8 @@ void board_init_r (gd_t *id, ulong dest_addr) #if defined(CONFIG_TQM8xxL) || defined(CONFIG_TQM8260) || \ defined(CONFIG_TQM8272) || \ - defined(CONFIG_CCM) || defined(CONFIG_KUP4K) || defined(CONFIG_KUP4X) + defined(CONFIG_CCM) || defined(CONFIG_KUP4K) || \ + defined(CONFIG_KUP4X) || defined(CONFIG_PCS440EP) load_sernum_ethaddr (); #endif /* IP Address */ @@ -961,7 +962,7 @@ void board_init_r (gd_t *id, ulong dest_addr) serial_buffered_init(); #endif -#ifdef CONFIG_STATUS_LED +#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT) status_led_set (STATUS_LED_BOOT, STATUS_LED_BLINKING); #endif diff --git a/net/eth.c b/net/eth.c index 0fc22115dc2..35e1ae95876 100644 --- a/net/eth.c +++ b/net/eth.c @@ -28,6 +28,14 @@ #if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) +#if defined(CONFIG_SHOW_BOOT_PROGRESS) +# include +extern void show_ethcfg_progress (int arg); +# define SHOW_BOOT_PROGRESS(arg) show_boot_progress (arg) +#else +# define SHOW_BOOT_PROGRESS(arg) +#endif + #ifdef CFG_GT_6426x extern int gt6426x_eth_initialize(bd_t *bis); #endif @@ -142,6 +150,7 @@ int eth_initialize(bd_t *bis) eth_devices = NULL; eth_current = NULL; + SHOW_BOOT_PROGRESS(64); #if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII) miiphy_init(); #endif @@ -270,10 +279,12 @@ int eth_initialize(bd_t *bis) if (!eth_devices) { puts ("No ethernet found.\n"); + SHOW_BOOT_PROGRESS(-64); } else { struct eth_device *dev = eth_devices; char *ethprime = getenv ("ethprime"); + SHOW_BOOT_PROGRESS(65); do { if (eth_number) puts (", "); diff --git a/tools/Makefile b/tools/Makefile index 6177f902716..7980f6c26ee 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -21,10 +21,10 @@ # MA 02111-1307 USA # -BIN_FILES = img2srec$(SFX) mkimage$(SFX) envcrc$(SFX) gen_eth_addr$(SFX) bmp_logo$(SFX) +BIN_FILES = img2srec$(SFX) mkimage$(SFX) envcrc$(SFX) ubsha1$(SFX) gen_eth_addr$(SFX) bmp_logo$(SFX) -OBJ_LINKS = environment.o crc32.o -OBJ_FILES = img2srec.o mkimage.o envcrc.o gen_eth_addr.o bmp_logo.o +OBJ_LINKS = environment.o crc32.o sha1.o +OBJ_FILES = img2srec.o mkimage.o envcrc.o ubsha1.o gen_eth_addr.o bmp_logo.o ifeq ($(ARCH),mips) BIN_FILES += inca-swap-bytes$(SFX) @@ -126,14 +126,17 @@ MAKEDEPEND = makedepend all: $(obj).depend $(BINS) $(LOGO_H) subdirs -$(obj)envcrc$(SFX): $(obj)envcrc.o $(obj)crc32.o $(obj)environment.o +$(obj)envcrc$(SFX): $(obj)envcrc.o $(obj)crc32.o $(obj)environment.o $(obj)sha1.o + $(CC) $(CFLAGS) -o $@ $^ + +$(obj)ubsha1$(SFX): $(obj)ubsha1.o $(obj)sha1.o $(CC) $(CFLAGS) -o $@ $^ $(obj)img2srec$(SFX): $(obj)img2srec.o $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ $(STRIP) $@ -$(obj)mkimage$(SFX): $(obj)mkimage.o $(obj)crc32.o +$(obj)mkimage$(SFX): $(obj)mkimage.o $(obj)crc32.o $(obj)sha1.o $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ $(STRIP) $@ @@ -160,9 +163,15 @@ $(obj)mpc86x_clk$(SFX): $(obj)mpc86x_clk.o $(obj)envcrc.o: $(src)envcrc.c $(CC) -g $(CFLAGS) -c -o $@ $< +$(obj)ubsha1.o: $(src)ubsha1.c + $(CC) -g $(CFLAGS) -c -o $@ $< + $(obj)crc32.o: $(obj)crc32.c $(CC) -g $(CFLAGS) -c -o $@ $< +$(obj)sha1.o: $(obj)sha1.c + $(CC) -g $(CFLAGS) -c -o $@ $< + $(obj)mkimage.o: $(src)mkimage.c $(CC) -g $(CFLAGS) -c -o $@ $< @@ -203,6 +212,10 @@ $(obj)crc32.c: @rm -f $(obj)crc32.c ln -s $(src)../lib_generic/crc32.c $(obj)crc32.c +$(obj)sha1.c: + @rm -f $(obj)sha1.c + ln -s $(src)../lib_generic/sha1.c $(obj)sha1.c + $(LOGO_H): $(obj)bmp_logo $(LOGO_BMP) $(obj)./bmp_logo $(LOGO_BMP) >$@ diff --git a/tools/ubsha1.c b/tools/ubsha1.c new file mode 100644 index 00000000000..bc877606d2f --- /dev/null +++ b/tools/ubsha1.c @@ -0,0 +1,119 @@ +/* + * (C) Copyright 2007 + * Heiko Schocher, DENX Software Engineering, + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "sha1.h" + +#ifndef __ASSEMBLY__ +#define __ASSEMBLY__ /* Dirty trick to get only #defines */ +#endif +#include +#undef __ASSEMBLY__ + +#ifndef O_BINARY /* should be define'd on __WIN32__ */ +#define O_BINARY 0 +#endif + +#ifndef MAP_FAILED +#define MAP_FAILED (-1) +#endif + +extern int errno; + +extern void sha1_csum (unsigned char *input, int ilen, unsigned char output[20]); + +int main (int argc, char **argv) +{ + unsigned char output[20]; + int i, len; + + char *imagefile; + char *cmdname = *argv; + unsigned char *ptr; + unsigned char *data; + struct stat sbuf; + unsigned char *ptroff; + int ifd; + int off; + + if (argc > 1) { + imagefile = argv[1]; + ifd = open (imagefile, O_RDWR|O_BINARY); + if (ifd < 0) { + fprintf (stderr, "%s: Can't open %s: %s\n", + cmdname, imagefile, strerror(errno)); + exit (EXIT_FAILURE); + } + if (fstat (ifd, &sbuf) < 0) { + fprintf (stderr, "%s: Can't stat %s: %s\n", + cmdname, imagefile, strerror(errno)); + exit (EXIT_FAILURE); + } + len = sbuf.st_size; + ptr = (unsigned char *)mmap(0, len, + PROT_READ, MAP_SHARED, ifd, 0); + if (ptr == (unsigned char *)MAP_FAILED) { + fprintf (stderr, "%s: Can't read %s: %s\n", + cmdname, imagefile, strerror(errno)); + exit (EXIT_FAILURE); + } + + /* create a copy, so we can blank out the sha1 sum */ + data = malloc (len); + memcpy (data, ptr, len); + off = SHA1_SUM_POS; + ptroff = &data[len + off]; + for (i = 0; i < SHA1_SUM_LEN; i++) { + ptroff[i] = 0; + } + + sha1_csum ((unsigned char *) data, len, (unsigned char *)output); + + printf ("U-Boot sum:\n"); + for (i = 0; i < 20 ; i++) + { + printf ("%02X ", output[i]); + } + printf ("\n"); + /* overwrite the sum in the bin file, with the actual */ + lseek (ifd, SHA1_SUM_POS, SEEK_END); + if (write (ifd, output, SHA1_SUM_LEN) != SHA1_SUM_LEN) { + fprintf (stderr, "%s: Can't write %s: %s\n", + cmdname, imagefile, strerror(errno)); + exit (EXIT_FAILURE); + } + + free (data); + (void) munmap((void *)ptr, len); + (void) close (ifd); + } + + return EXIT_SUCCESS; +} -- cgit v1.3.1 From 90b1b2d69b9396ff2f01165ebc16c9a594eb5926 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Tue, 3 Jul 2007 00:17:28 -0600 Subject: Fix Makefile to use $(MKCONFIG) macro for all board ports Signed-off-by: Grant Likely --- Makefile | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'Makefile') diff --git a/Makefile b/Makefile index 2d8cff3ffa4..3b71b21e22e 100644 --- a/Makefile +++ b/Makefile @@ -424,7 +424,7 @@ jupiter_config: unconfig @$(MKCONFIG) jupiter ppc mpc5xxx jupiter v38b_config: unconfig - @./mkconfig -a v38b ppc mpc5xxx v38b + @$(MKCONFIG) -a v38b ppc mpc5xxx v38b inka4x0_config: unconfig @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0 @@ -1027,7 +1027,7 @@ ADCIOP_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd alpr_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx alpr prodrive + @$(MKCONFIG) $(@:_config=) ppc ppc4xx alpr prodrive AP1000_config:unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix @@ -1239,7 +1239,7 @@ rainier_nand_config: unconfig @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk sc3_config:unconfig - @./mkconfig $(@:_config=) ppc ppc4xx sc3 + @$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3 taishan_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc @@ -1405,7 +1405,7 @@ ep8260_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep8260 ep82xxm_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8260 ep82xxm + @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep82xxm gw8260_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8260 gw8260 @@ -1841,7 +1841,7 @@ TQM8560_config: unconfig ######################################################################### MPC8641HPCN_config: unconfig - @./mkconfig $(@:_config=) ppc mpc86xx mpc8641hpcn + @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8641hpcn ######################################################################### @@ -2411,12 +2411,12 @@ suzaku_config: unconfig ml401_config: unconfig @ >include/config.h @echo "#define CONFIG_ML401 1" >> include/config.h - @./mkconfig -a $(@:_config=) microblaze microblaze ml401 xilinx + @$(MKCONFIG) -a $(@:_config=) microblaze microblaze ml401 xilinx xupv2p_config: unconfig @ >include/config.h @echo "#define CONFIG_XUPV2P 1" >> include/config.h - @./mkconfig -a $(@:_config=) microblaze microblaze xupv2p xilinx + @$(MKCONFIG) -a $(@:_config=) microblaze microblaze xupv2p xilinx ######################################################################### ## Blackfin @@ -2441,7 +2441,7 @@ bf561-ezkit_config: unconfig ######################################################################### atstk1002_config : unconfig - @./mkconfig $(@:_config=) avr32 at32ap atstk1000 atmel at32ap7000 + @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap7000 ######################################################################### ######################################################################### -- cgit v1.3.1 From b44896215a09c60fa40cae906f7ed207bbc2c492 Mon Sep 17 00:00:00 2001 From: Sergei Poselenov Date: Thu, 5 Jul 2007 08:17:37 +0200 Subject: Merged POST framework with the current TOT. Signed-off-by: Sergei Poselenov --- Makefile | 2 + cpu/ppc4xx/start.S | 8 + include/configs/sequoia.h | 4 + include/ppc440.h | 2 - post/cpu/mpc8xx/Makefile | 2 +- post/cpu/mpc8xx/cache.c | 81 ++++++ post/cpu/ppc4xx/Makefile | 3 +- post/cpu/ppc4xx/cache.c | 114 ++++++++ post/cpu/ppc4xx/cache_4xx.S | 448 ++++++++++++++++++++++++++++++ post/cpu/ppc4xx/ether.c | 395 ++++++++++++++++++++++++++ post/cpu/ppc4xx/fpu.c | 10 +- post/cpu/ppc4xx/spr.c | 41 +-- post/cpu/ppc4xx/uart.c | 3 +- post/cpu/ppc4xx/watchdog.c | 9 +- post/drivers/Makefile | 2 +- post/drivers/cache.c | 81 ------ post/lib_ppc/Makefile | 1 + post/lib_ppc/fpu/20001122-1.c | 62 +++++ post/lib_ppc/fpu/20010114-2.c | 66 +++++ post/lib_ppc/fpu/20010226-1.c | 54 ++++ post/lib_ppc/fpu/980619-1.c | 60 ++++ post/lib_ppc/fpu/Makefile | 32 +++ post/lib_ppc/fpu/acc1.c | 57 ++++ post/lib_ppc/fpu/compare-fp-1.c | 225 +++++++++++++++ post/lib_ppc/fpu/fpu.c | 92 ++++++ post/lib_ppc/fpu/mul-subnormal-single-1.c | 103 +++++++ 26 files changed, 1847 insertions(+), 110 deletions(-) create mode 100644 post/cpu/mpc8xx/cache.c create mode 100644 post/cpu/ppc4xx/cache.c create mode 100644 post/cpu/ppc4xx/cache_4xx.S create mode 100644 post/cpu/ppc4xx/ether.c delete mode 100644 post/drivers/cache.c create mode 100644 post/lib_ppc/fpu/20001122-1.c create mode 100644 post/lib_ppc/fpu/20010114-2.c create mode 100644 post/lib_ppc/fpu/20010226-1.c create mode 100644 post/lib_ppc/fpu/980619-1.c create mode 100644 post/lib_ppc/fpu/Makefile create mode 100644 post/lib_ppc/fpu/acc1.c create mode 100644 post/lib_ppc/fpu/compare-fp-1.c create mode 100644 post/lib_ppc/fpu/fpu.c create mode 100644 post/lib_ppc/fpu/mul-subnormal-single-1.c (limited to 'Makefile') diff --git a/Makefile b/Makefile index 2d8cff3ffa4..626283f708b 100644 --- a/Makefile +++ b/Makefile @@ -214,6 +214,8 @@ LIBS += drivers/sk98lin/libsk98lin.a LIBS += post/libpost.a post/drivers/libpostdrivers.a LIBS += $(shell if [ -d post/lib_$(ARCH) ]; then echo \ "post/lib_$(ARCH)/libpost$(ARCH).a"; fi) +LIBS += $(shell if [ -d post/lib_$(ARCH)/fpu ]; then echo \ + "post/lib_$(ARCH)/fpu/libpost$(ARCH)fpu.a"; fi) LIBS += $(shell if [ -d post/cpu/$(CPU) ]; then echo \ "post/cpu/$(CPU)/libpost$(CPU).a"; fi) LIBS += $(shell if [ -d post/board/$(BOARDDIR) ]; then echo \ diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index dfe813c3f45..6086b6ceae4 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -1217,15 +1217,23 @@ mck_return: * NOTE: currently the 440s run with dcache _disabled_ once relocated to DRAM, * although for some cache-ralated calls stubs have to be provided to satisfy * symbols resolution. + * Icache-related functions are used in POST framework. * */ #ifdef CONFIG_440 .globl dcache_disable + .globl icache_disable + .globl icache_enable dcache_disable: +icache_disable: +icache_enable: blr .globl dcache_status + .globl icache_status dcache_status: +icache_status: + mr r3, 0 blr #else flush_dcache: diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index 44bc9555194..32199929a97 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -334,10 +334,14 @@ CFG_POST_CPU | \ CFG_POST_UART | \ CFG_POST_I2C | \ + CFG_POST_CACHE | \ + CFG_POST_FPU | \ + CFG_POST_ETHER | \ CFG_POST_SPR) #define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4) #define CONFIG_LOGBUFFER +#define CFG_POST_CACHE_ADDR 0x10000000 /* free virtual address */ #define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */ diff --git a/include/ppc440.h b/include/ppc440.h index 61c937d9f9d..93c10f12099 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -282,7 +282,6 @@ #define sdr_sdstp3 0x4003 #endif /* CONFIG_440GX */ -#ifdef CONFIG_440 /*----------------------------------------------------------------------------+ | Core Configuration/MMU configuration for 440 (CCR1 for 440x5 only). +----------------------------------------------------------------------------*/ @@ -306,7 +305,6 @@ #define MMUCR_IULXE 0x00400000 #define MMUCR_STS 0x00100000 #define MMUCR_STID_MASK 0x000000FF -#endif /* CONFIG_440 */ #ifdef CONFIG_440SPE #undef sdr_sdstp2 diff --git a/post/cpu/mpc8xx/Makefile b/post/cpu/mpc8xx/Makefile index 9dd3f0fce9b..f871cbab649 100644 --- a/post/cpu/mpc8xx/Makefile +++ b/post/cpu/mpc8xx/Makefile @@ -24,6 +24,6 @@ LIB = libpostmpc8xx.a AOBJS = cache_8xx.o -COBJS = ether.o spr.o uart.o usb.o watchdog.o +COBJS = cache.o ether.o spr.o uart.o usb.o watchdog.o include $(TOPDIR)/post/rules.mk diff --git a/post/cpu/mpc8xx/cache.c b/post/cpu/mpc8xx/cache.c new file mode 100644 index 00000000000..501465c06a1 --- /dev/null +++ b/post/cpu/mpc8xx/cache.c @@ -0,0 +1,81 @@ +/* + * (C) Copyright 2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +/* Cache test + * + * This test verifies the CPU data and instruction cache using + * several test scenarios. + */ + +#ifdef CONFIG_POST + +#include +#include + +#if CONFIG_POST & CFG_POST_CACHE + +#define CACHE_POST_SIZE 1024 + +extern int cache_post_test1 (char *, unsigned int); +extern int cache_post_test2 (char *, unsigned int); +extern int cache_post_test3 (char *, unsigned int); +extern int cache_post_test4 (char *, unsigned int); +extern int cache_post_test5 (void); +extern int cache_post_test6 (void); + +int cache_post_test (int flags) +{ + int ints = disable_interrupts (); + int res = 0; + static char ta[CACHE_POST_SIZE + 0xf]; + char *testarea = (char *) (((unsigned long) ta + 0xf) & ~0xf); + + WATCHDOG_RESET (); + if (res == 0) + res = cache_post_test1 (testarea, CACHE_POST_SIZE); + WATCHDOG_RESET (); + if (res == 0) + res = cache_post_test2 (testarea, CACHE_POST_SIZE); + WATCHDOG_RESET (); + if (res == 0) + res = cache_post_test3 (testarea, CACHE_POST_SIZE); + WATCHDOG_RESET (); + if (res == 0) + res = cache_post_test4 (testarea, CACHE_POST_SIZE); + WATCHDOG_RESET (); + if (res == 0) + res = cache_post_test5 (); + WATCHDOG_RESET (); + if (res == 0) + res = cache_post_test6 (); + + WATCHDOG_RESET (); + if (ints) + enable_interrupts (); + return res; +} + +#endif /* CONFIG_POST & CFG_POST_CACHE */ +#endif /* CONFIG_POST */ diff --git a/post/cpu/ppc4xx/Makefile b/post/cpu/ppc4xx/Makefile index 8e8ab50577a..f1034dac249 100644 --- a/post/cpu/ppc4xx/Makefile +++ b/post/cpu/ppc4xx/Makefile @@ -23,6 +23,7 @@ LIB = libpostppc4xx.a -COBJS = fpu.o spr.o uart.o watchdog.o +AOBJS = cache_4xx.o +COBJS = cache.o ether.o fpu.o spr.o uart.o watchdog.o include $(TOPDIR)/post/rules.mk diff --git a/post/cpu/ppc4xx/cache.c b/post/cpu/ppc4xx/cache.c new file mode 100644 index 00000000000..e1f989ed937 --- /dev/null +++ b/post/cpu/ppc4xx/cache.c @@ -0,0 +1,114 @@ +/* + * (C) Copyright 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Author: Igor Lisitsin + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +/* Cache test + * + * This test verifies the CPU data and instruction cache using + * several test scenarios. + */ + +#ifdef CONFIG_POST + +#include + +#if CONFIG_POST & CFG_POST_CACHE + +#include +#include + +#define CACHE_POST_SIZE 1024 + +void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value); + +int cache_post_test1 (int tlb, void *p, int size); +int cache_post_test2 (int tlb, void *p, int size); +int cache_post_test3 (int tlb, void *p, int size); +int cache_post_test4 (int tlb, void *p, int size); +int cache_post_test5 (int tlb, void *p, int size); +int cache_post_test6 (int tlb, void *p, int size); + +static int tlb = -1; /* index to the victim TLB entry */ + +static unsigned char testarea[CACHE_POST_SIZE] +__attribute__((__aligned__(CACHE_POST_SIZE))); + +int cache_post_test (int flags) +{ + void* virt = (void*)CFG_POST_CACHE_ADDR; + int ints, i, res = 0; + u32 word0; + + if (tlb < 0) { + /* + * Allocate a new TLB entry, since we are going to modify + * the write-through and caching inhibited storage attributes. + */ + program_tlb((u32)testarea, (u32)virt, + CACHE_POST_SIZE, TLB_WORD2_I_ENABLE); + + /* Find the TLB entry */ + for (i = 0;; i++) { + if (i >= PPC4XX_TLB_SIZE) { + printf ("Failed to program tlb entry\n"); + return -1; + } + word0 = mftlb1(i); + if (TLB_WORD0_EPN_DECODE(word0) == (u32)virt) { + tlb = i; + break; + } + } + } + ints = disable_interrupts (); + + WATCHDOG_RESET (); + if (res == 0) + res = cache_post_test1 (tlb, virt, CACHE_POST_SIZE); + WATCHDOG_RESET (); + if (res == 0) + res = cache_post_test2 (tlb, virt, CACHE_POST_SIZE); + WATCHDOG_RESET (); + if (res == 0) + res = cache_post_test3 (tlb, virt, CACHE_POST_SIZE); + WATCHDOG_RESET (); + if (res == 0) + res = cache_post_test4 (tlb, virt, CACHE_POST_SIZE); + WATCHDOG_RESET (); + if (res == 0) + res = cache_post_test5 (tlb, virt, CACHE_POST_SIZE); + WATCHDOG_RESET (); + if (res == 0) + res = cache_post_test6 (tlb, virt, CACHE_POST_SIZE); + + if (ints) + enable_interrupts (); + + return res; +} + +#endif /* CONFIG_POST & CFG_POST_CACHE */ +#endif /* CONFIG_POST */ diff --git a/post/cpu/ppc4xx/cache_4xx.S b/post/cpu/ppc4xx/cache_4xx.S new file mode 100644 index 00000000000..785b8d60b93 --- /dev/null +++ b/post/cpu/ppc4xx/cache_4xx.S @@ -0,0 +1,448 @@ +/* + * (C) Copyright 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Author: Igor Lisitsin + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +#ifdef CONFIG_POST + +#include +#include +#include +#include +#include + +#if CONFIG_POST & CFG_POST_CACHE + + .text + +/* void cache_post_disable (int tlb) + */ +cache_post_disable: + tlbre r0, r3, 0x0002 + ori r0, r0, TLB_WORD2_I_ENABLE@l + tlbwe r0, r3, 0x0002 + sync + isync + blr + +/* void cache_post_wt (int tlb) + */ +cache_post_wt: + tlbre r0, r3, 0x0002 + ori r0, r0, TLB_WORD2_W_ENABLE@l + andi. r0, r0, ~TLB_WORD2_I_ENABLE@l + tlbwe r0, r3, 0x0002 + sync + isync + blr + +/* void cache_post_wb (int tlb) + */ +cache_post_wb: + tlbre r0, r3, 0x0002 + andi. r0, r0, ~TLB_WORD2_W_ENABLE@l + andi. r0, r0, ~TLB_WORD2_I_ENABLE@l + tlbwe r0, r3, 0x0002 + sync + isync + blr + +/* void cache_post_dinvalidate (void *p, int size) + */ +cache_post_dinvalidate: + dcbi r0, r3 + addi r3, r3, CFG_CACHELINE_SIZE + subic. r4, r4, CFG_CACHELINE_SIZE + bgt cache_post_dinvalidate + sync + blr + +/* void cache_post_dstore (void *p, int size) + */ +cache_post_dstore: + dcbst r0, r3 + addi r3, r3, CFG_CACHELINE_SIZE + subic. r4, r4, CFG_CACHELINE_SIZE + bgt cache_post_dstore + sync + blr + +/* void cache_post_dtouch (void *p, int size) + */ +cache_post_dtouch: + dcbt r0, r3 + addi r3, r3, CFG_CACHELINE_SIZE + subic. r4, r4, CFG_CACHELINE_SIZE + bgt cache_post_dtouch + sync + blr + +/* void cache_post_iinvalidate (void) + */ +cache_post_iinvalidate: + iccci r0, r0 + sync + blr + +/* void cache_post_memset (void *p, int val, int size) + */ +cache_post_memset: + mtctr r5 +1: + stb r4, 0(r3) + addi r3, r3, 1 + bdnz 1b + blr + +/* int cache_post_check (void *p, int size) + */ +cache_post_check: + mtctr r4 +1: + lbz r0, 0(r3) + addi r3, r3, 1 + cmpwi r0, 0xff + bne 2f + bdnz 1b + li r3, 0 + blr +2: + li r3, -1 + blr + +#define CACHE_POST_DISABLE() \ + mr r3, r10; \ + bl cache_post_disable + +#define CACHE_POST_WT() \ + mr r3, r10; \ + bl cache_post_wt + +#define CACHE_POST_WB() \ + mr r3, r10; \ + bl cache_post_wb + +#define CACHE_POST_DINVALIDATE() \ + mr r3, r11; \ + mr r4, r12; \ + bl cache_post_dinvalidate + +#define CACHE_POST_DFLUSH() \ + mr r3, r11; \ + mr r4, r12; \ + bl cache_post_dflush + +#define CACHE_POST_DSTORE() \ + mr r3, r11; \ + mr r4, r12; \ + bl cache_post_dstore + +#define CACHE_POST_DTOUCH() \ + mr r3, r11; \ + mr r4, r12; \ + bl cache_post_dtouch + +#define CACHE_POST_IINVALIDATE() \ + bl cache_post_iinvalidate + +#define CACHE_POST_MEMSET(val) \ + mr r3, r11; \ + li r4, val; \ + mr r5, r12; \ + bl cache_post_memset + +#define CACHE_POST_CHECK() \ + mr r3, r11; \ + mr r4, r12; \ + bl cache_post_check; \ + mr r13, r3 + +/* + * Write and read 0xff pattern with caching enabled. + */ + .global cache_post_test1 +cache_post_test1: + mflr r9 + mr r10, r3 /* tlb */ + mr r11, r4 /* p */ + mr r12, r5 /* size */ + + CACHE_POST_WB() + CACHE_POST_DINVALIDATE() + + /* Write the negative pattern to the test area */ + CACHE_POST_MEMSET(0xff) + + /* Read the test area */ + CACHE_POST_CHECK() + + CACHE_POST_DINVALIDATE() + CACHE_POST_DISABLE() + + mr r3, r13 + mtlr r9 + blr + +/* + * Write zeroes with caching enabled. + * Write 0xff pattern with caching disabled. + * Read 0xff pattern with caching enabled. + */ + .global cache_post_test2 +cache_post_test2: + mflr r9 + mr r10, r3 /* tlb */ + mr r11, r4 /* p */ + mr r12, r5 /* size */ + + CACHE_POST_WB() + CACHE_POST_DINVALIDATE() + + /* Write the zero pattern to the test area */ + CACHE_POST_MEMSET(0) + + CACHE_POST_DINVALIDATE() + CACHE_POST_DISABLE() + + /* Write the negative pattern to the test area */ + CACHE_POST_MEMSET(0xff) + + CACHE_POST_WB() + + /* Read the test area */ + CACHE_POST_CHECK() + + CACHE_POST_DINVALIDATE() + CACHE_POST_DISABLE() + + mr r3, r13 + mtlr r9 + blr + +/* + * Write-through mode test. + * Write zeroes, store the cache, write 0xff pattern. + * Invalidate the cache. + * Check that 0xff pattern is read. + */ + .global cache_post_test3 +cache_post_test3: + mflr r9 + mr r10, r3 /* tlb */ + mr r11, r4 /* p */ + mr r12, r5 /* size */ + + CACHE_POST_WT() + CACHE_POST_DINVALIDATE() + + /* Cache the test area */ + CACHE_POST_DTOUCH() + + /* Write the zero pattern to the test area */ + CACHE_POST_MEMSET(0) + + CACHE_POST_DSTORE() + + /* Write the negative pattern to the test area */ + CACHE_POST_MEMSET(0xff) + + CACHE_POST_DINVALIDATE() + CACHE_POST_DISABLE() + + /* Read the test area */ + CACHE_POST_CHECK() + + mr r3, r13 + mtlr r9 + blr + +/* + * Write-back mode test. + * Write 0xff pattern, store the cache, write zeroes. + * Invalidate the cache. + * Check that 0xff pattern is read. + */ + .global cache_post_test4 +cache_post_test4: + mflr r9 + mr r10, r3 /* tlb */ + mr r11, r4 /* p */ + mr r12, r5 /* size */ + + CACHE_POST_WB() + CACHE_POST_DINVALIDATE() + + /* Cache the test area */ + CACHE_POST_DTOUCH() + + /* Write the negative pattern to the test area */ + CACHE_POST_MEMSET(0xff) + + CACHE_POST_DSTORE() + + /* Write the zero pattern to the test area */ + CACHE_POST_MEMSET(0) + + CACHE_POST_DINVALIDATE() + CACHE_POST_DISABLE() + + /* Read the test area */ + CACHE_POST_CHECK() + + mr r3, r13 + mtlr r9 + blr + +/* + * Load the test instructions into the instruction cache. + * Replace the test instructions. + * Check that the original instructions are executed. + */ + .global cache_post_test5 +cache_post_test5: + mflr r9 + mr r10, r3 /* tlb */ + mr r11, r4 /* p */ + mr r12, r5 /* size */ + + CACHE_POST_WT() + CACHE_POST_IINVALIDATE() + + /* Compute r13 = cache_post_test_inst */ + bl cache_post_test5_reloc +cache_post_test5_reloc: + mflr r13 + lis r0, (cache_post_test_inst - cache_post_test5_reloc)@h + ori r0, r0, (cache_post_test_inst - cache_post_test5_reloc)@l + add r13, r13, r0 + + /* Copy the test instructions to the test area */ + lwz r0, 0(r13) + stw r0, 0(r11) + lwz r0, 8(r13) + stw r0, 4(r11) + sync + + /* Invalidate the cache line */ + icbi r0, r11 + sync + isync + + /* Execute the test instructions */ + mtlr r11 + blrl + + /* Replace the test instruction */ + lwz r0, 4(r13) + stw r0, 0(r11) + sync + + /* Do not invalidate the cache line */ + isync + + /* Execute the test instructions */ + mtlr r11 + blrl + mr r13, r3 + + CACHE_POST_IINVALIDATE() + CACHE_POST_DINVALIDATE() + CACHE_POST_DISABLE() + + mr r3, r13 + mtlr r9 + blr + +/* + * Load the test instructions into the instruction cache. + * Replace the test instructions and invalidate the cache. + * Check that the replaced instructions are executed. + */ + .global cache_post_test6 +cache_post_test6: + mflr r9 + mr r10, r3 /* tlb */ + mr r11, r4 /* p */ + mr r12, r5 /* size */ + + CACHE_POST_WT() + CACHE_POST_IINVALIDATE() + + /* Compute r13 = cache_post_test_inst */ + bl cache_post_test6_reloc +cache_post_test6_reloc: + mflr r13 + lis r0, (cache_post_test_inst - cache_post_test6_reloc)@h + ori r0, r0, (cache_post_test_inst - cache_post_test6_reloc)@l + add r13, r13, r0 + + /* Copy the test instructions to the test area */ + lwz r0, 4(r13) + stw r0, 0(r11) + lwz r0, 8(r13) + stw r0, 4(r11) + sync + + /* Invalidate the cache line */ + icbi r0, r11 + sync + isync + + /* Execute the test instructions */ + mtlr r11 + blrl + + /* Replace the test instruction */ + lwz r0, 0(r13) + stw r0, 0(r11) + sync + + /* Invalidate the cache line */ + icbi r0, r11 + sync + isync + + /* Execute the test instructions */ + mtlr r11 + blrl + mr r13, r3 + + CACHE_POST_IINVALIDATE() + CACHE_POST_DINVALIDATE() + CACHE_POST_DISABLE() + + mr r3, r13 + mtlr r9 + blr + +/* Test instructions. + */ +cache_post_test_inst: + li r3, 0 + li r3, -1 + blr + +#endif /* CONFIG_POST & CFG_POST_CACHE */ +#endif /* CONFIG_POST */ diff --git a/post/cpu/ppc4xx/ether.c b/post/cpu/ppc4xx/ether.c new file mode 100644 index 00000000000..391c815d7ae --- /dev/null +++ b/post/cpu/ppc4xx/ether.c @@ -0,0 +1,395 @@ +/* + * (C) Copyright 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Author: Igor Lisitsin + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +/* + * Ethernet test + * + * The Ethernet Media Access Controllers (EMAC) are tested in the + * internal loopback mode. + * The controllers are configured accordingly and several packets + * are transmitted. The configurable test parameters are: + * MIN_PACKET_LENGTH - minimum size of packet to transmit + * MAX_PACKET_LENGTH - maximum size of packet to transmit + * TEST_NUM - number of tests + */ + +#ifdef CONFIG_POST + +#include + +#if CONFIG_POST & CFG_POST_ETHER + +#include +#include +#include +#include <405_mal.h> +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) +#define SDR0_MFR_ETH_CLK_SEL_V(n) ((0x01<<27) / (n+1)) +#endif + +#define MIN_PACKET_LENGTH 64 +#define MAX_PACKET_LENGTH 256 +#define TEST_NUM 1 + +static volatile mal_desc_t tx __cacheline_aligned; +static volatile mal_desc_t rx __cacheline_aligned; +static char *tx_buf; +static char *rx_buf; + +static void ether_post_init (int devnum, int hw_addr) +{ + int i; + unsigned mode_reg; +#if defined(CONFIG_440GX) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_440SP) || defined(CONFIG_440SPE) + sys_info_t sysinfo; +#endif +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || defined(CONFIG_440SPE) + unsigned long mfr; +#endif + +#if defined(CONFIG_440GX) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_440SP) || defined(CONFIG_440SPE) + /* Need to get the OPB frequency so we can access the PHY */ + get_sys_info (&sysinfo); +#endif + +#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) + /* provide clocks for EMAC internal loopback */ + mfsdr (sdr_mfr, mfr); + mfr |= SDR0_MFR_ETH_CLK_SEL_V(devnum); + mtsdr (sdr_mfr, mfr); + sync (); +#endif + /* reset emac */ + out32 (EMAC_M0 + hw_addr, EMAC_M0_SRST); + sync (); + + for (i = 0;; i++) { + if (!(in32 (EMAC_M0 + hw_addr) & EMAC_M0_SRST)) + break; + if (i >= 1000) { + printf ("Timeout resetting EMAC\n"); + break; + } + udelay (1000); + } +#if defined(CONFIG_440GX) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_440SP) || defined(CONFIG_440SPE) + /* Whack the M1 register */ + mode_reg = 0x0; + if (sysinfo.freqOPB <= 50000000); + else if (sysinfo.freqOPB <= 66666667) + mode_reg |= EMAC_M1_OBCI_66; + else if (sysinfo.freqOPB <= 83333333) + mode_reg |= EMAC_M1_OBCI_83; + else if (sysinfo.freqOPB <= 100000000) + mode_reg |= EMAC_M1_OBCI_100; + else + mode_reg |= EMAC_M1_OBCI_GT100; + + out32 (EMAC_M1 + hw_addr, mode_reg); + +#endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */ + + /* set the Mal configuration reg */ +#if defined(CONFIG_440GX) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_440SP) || defined(CONFIG_440SPE) + mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | + MAL_CR_PLBLT_DEFAULT | 0x00330000); +#else + mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | MAL_CR_PLBLT_DEFAULT); + /* Errata 1.12: MAL_1 -- Disable MAL bursting */ + if (get_pvr() == PVR_440GP_RB) { + mtdcr (malmcr, mfdcr(malmcr) & ~MAL_CR_PLBB); + } +#endif + /* setup buffer descriptors */ + tx.ctrl = MAL_TX_CTRL_WRAP; + tx.data_len = 0; + tx.data_ptr = (char*)L1_CACHE_ALIGN((u32)tx_buf); + + rx.ctrl = MAL_TX_CTRL_WRAP | MAL_RX_CTRL_EMPTY; + rx.data_len = 0; + rx.data_ptr = (char*)L1_CACHE_ALIGN((u32)rx_buf); + + switch (devnum) { + case 1: + /* setup MAL tx & rx channel pointers */ +#if defined (CONFIG_405EP) || defined (CONFIG_440EP) || defined (CONFIG_440GR) + mtdcr (maltxctp2r, &tx); +#else + mtdcr (maltxctp1r, &tx); +#endif +#if defined(CONFIG_440) + mtdcr (maltxbattr, 0x0); + mtdcr (malrxbattr, 0x0); +#endif + mtdcr (malrxctp1r, &rx); + /* set RX buffer size */ + mtdcr (malrcbs1, PKTSIZE_ALIGN / 16); + break; + case 0: + default: + /* setup MAL tx & rx channel pointers */ +#if defined(CONFIG_440) + mtdcr (maltxbattr, 0x0); + mtdcr (malrxbattr, 0x0); +#endif + mtdcr (maltxctp0r, &tx); + mtdcr (malrxctp0r, &rx); + /* set RX buffer size */ + mtdcr (malrcbs0, PKTSIZE_ALIGN / 16); + break; + } + + /* Enable MAL transmit and receive channels */ +#if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR) + mtdcr (maltxcasr, (MAL_TXRX_CASR >> (devnum*2))); +#else + mtdcr (maltxcasr, (MAL_TXRX_CASR >> devnum)); +#endif + mtdcr (malrxcasr, (MAL_TXRX_CASR >> devnum)); + + /* set internal loopback mode */ + out32 (EMAC_M1 + hw_addr, EMAC_M1_FDE | EMAC_M1_ILE | + EMAC_M1_RFS_4K | EMAC_M1_TX_FIFO_2K | + EMAC_M1_MF_100MBPS | EMAC_M1_IST | + in32 (EMAC_M1)); + + /* set transmit enable & receive enable */ + out32 (EMAC_M0 + hw_addr, EMAC_M0_TXE | EMAC_M0_RXE); + + /* enable broadcast address */ + out32 (EMAC_RXM + hw_addr, EMAC_RMR_BAE); + + /* set transmit request threshold register */ + out32 (EMAC_TRTR + hw_addr, 0x18000000); /* 256 byte threshold */ + + /* set receive low/high water mark register */ +#if defined(CONFIG_440) + /* 440s has a 64 byte burst length */ + out32 (EMAC_RX_HI_LO_WMARK + hw_addr, 0x80009000); +#else + /* 405s have a 16 byte burst length */ + out32 (EMAC_RX_HI_LO_WMARK + hw_addr, 0x0f002000); +#endif /* defined(CONFIG_440) */ + out32 (EMAC_TXM1 + hw_addr, 0xf8640000); + + /* Set fifo limit entry in tx mode 0 */ + out32 (EMAC_TXM0 + hw_addr, 0x00000003); + /* Frame gap set */ + out32 (EMAC_I_FRAME_GAP_REG + hw_addr, 0x00000008); + sync (); +} + +static void ether_post_halt (int devnum, int hw_addr) +{ + int i = 0; +#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) + unsigned long mfr; +#endif + + /* 1st reset MAL channel */ + /* Note: writing a 0 to a channel has no effect */ +#if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR) + mtdcr (maltxcarr, MAL_TXRX_CASR >> (devnum * 2)); +#else + mtdcr (maltxcarr, MAL_TXRX_CASR >> devnum); +#endif + mtdcr (malrxcarr, MAL_TXRX_CASR >> devnum); + + /* wait for reset */ + while (mfdcr (malrxcasr) & (MAL_TXRX_CASR >> devnum)) { + if (i++ >= 1000) + break; + udelay (1000); + } + /* emac reset */ + out32 (EMAC_M0 + hw_addr, EMAC_M0_SRST); + +#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) + /* remove clocks for EMAC internal loopback */ + mfsdr (sdr_mfr, mfr); + mfr &= ~SDR0_MFR_ETH_CLK_SEL_V(devnum); + mtsdr (sdr_mfr, mfr); +#endif +} + +static void ether_post_send (int devnum, int hw_addr, void *packet, int length) +{ + int i = 0; + + while (tx.ctrl & MAL_TX_CTRL_READY) { + if (i++ > 100) { + printf ("TX timeout\n"); + return; + } + udelay (1000); + } + tx.ctrl = MAL_TX_CTRL_READY | MAL_TX_CTRL_WRAP | MAL_TX_CTRL_LAST | + EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP; + tx.data_len = length; + memcpy (tx.data_ptr, packet, length); + sync (); + + out32 (EMAC_TXM0 + hw_addr, in32 (EMAC_TXM0 + hw_addr) | EMAC_TXM0_GNP0); + sync (); +} + +static int ether_post_recv (int devnum, int hw_addr, void *packet, int max_length) +{ + int length; + int i = 0; + + while (rx.ctrl & MAL_RX_CTRL_EMPTY) { + if (i++ > 100) { + printf ("RX timeout\n"); + return 0; + } + udelay (1000); + } + length = rx.data_len - 4; + if (length <= max_length) + memcpy(packet, rx.data_ptr, length); + sync (); + + rx.ctrl |= MAL_RX_CTRL_EMPTY; + sync (); + + return length; +} + + /* + * Test routines + */ + +static void packet_fill (char *packet, int length) +{ + char c = (char) length; + int i; + + /* set up ethernet header */ + memset (packet, 0xff, 14); + + for (i = 14; i < length; i++) { + packet[i] = c++; + } +} + +static int packet_check (char *packet, int length) +{ + char c = (char) length; + int i; + + for (i = 14; i < length; i++) { + if (packet[i] != c++) + return -1; + } + + return 0; +} + +static int test_ctlr (int devnum, int hw_addr) +{ + int res = -1; + char packet_send[MAX_PACKET_LENGTH]; + char packet_recv[MAX_PACKET_LENGTH]; + int length; + int i; + int l; + + ether_post_init (devnum, hw_addr); + + for (i = 0; i < TEST_NUM; i++) { + for (l = MIN_PACKET_LENGTH; l <= MAX_PACKET_LENGTH; l++) { + packet_fill (packet_send, l); + + ether_post_send (devnum, hw_addr, packet_send, l); + + length = ether_post_recv (devnum, hw_addr, packet_recv, + sizeof (packet_recv)); + + if (length != l || packet_check (packet_recv, length) < 0) { + goto Done; + } + } + } + + res = 0; + +Done: + + ether_post_halt (devnum, hw_addr); + + if (res != 0) { + post_log ("EMAC%d test failed\n", devnum); + } + + return res; +} + +int ether_post_test (int flags) +{ + int res = 0; + + /* Allocate tx & rx packet buffers */ + tx_buf = malloc (PKTSIZE_ALIGN + CFG_CACHELINE_SIZE); + rx_buf = malloc (PKTSIZE_ALIGN + CFG_CACHELINE_SIZE); + + if (!tx_buf || !rx_buf) { + printf ("Failed to allocate packet buffers\n"); + res = -1; + goto out_free; + } + + /* EMAC0 */ + if (test_ctlr (0, 0)) + res = -1; + + /* EMAC1 */ + if (test_ctlr (1, 0x100)) + res = -1; + +out_free: + free (tx_buf); + free (rx_buf); + + return res; +} + +#endif /* CONFIG_POST & CFG_POST_ETHER */ +#endif /* CONFIG_POST */ diff --git a/post/cpu/ppc4xx/fpu.c b/post/cpu/ppc4xx/fpu.c index 1935c011ba7..c2eb4a9bf0b 100644 --- a/post/cpu/ppc4xx/fpu.c +++ b/post/cpu/ppc4xx/fpu.c @@ -1,5 +1,8 @@ /* - * Copyright (C) 2007 Wolfgang Denk + * (C) Copyright 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Author: Sergei Poselenov * * See file CREDITS for list of people who contributed to this * project. @@ -34,7 +37,7 @@ int fpu_status(void) { if (mfspr(ccr0) & CCR0_DAPUIB) return 0; /* Disabled */ - else + else return 1; /* Enabled */ } @@ -51,5 +54,6 @@ void fpu_enable(void) mtspr(ccr0, mfspr(ccr0) & ~CCR0_DAPUIB); mtmsr(mfmsr() | MSR_FP); } + #endif -#endif +#endif /* CONFIG_POST */ diff --git a/post/cpu/ppc4xx/spr.c b/post/cpu/ppc4xx/spr.c index f62526a1716..be5a701f317 100644 --- a/post/cpu/ppc4xx/spr.c +++ b/post/cpu/ppc4xx/spr.c @@ -2,6 +2,8 @@ * (C) Copyright 2007 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * + * Author: Igor Lisitsin + * * See file CREDITS for list of people who contributed to this * project. * @@ -39,6 +41,8 @@ #if CONFIG_POST & CFG_POST_SPR +#include + static struct { int number; @@ -60,8 +64,10 @@ static struct {0x113, "SPRG3", 0x00000000, 0x00000000}, {0x11f, "PVR", 0x00000000, 0x00000000}, - /* Additional Special-Purpose Registers */ - + /* Additional Special-Purpose Registers. + * The values must match the initialization + * values from cpu/ppc4xx/start.S + */ {0x30, "PID", 0x00000000, 0x00000000}, {0x3a, "CSRR0", 0x00000000, 0x00000000}, {0x3b, "CSRR1", 0x00000000, 0x00000000}, @@ -90,22 +96,22 @@ static struct {0x13f, "DVC2", 0x00000000, 0x00000000}, {0x150, "TSR", 0x00000000, 0x00000000}, {0x154, "TCR", 0x00000000, 0x00000000}, - {0x190, "IVOR0", 0x00000000, 0x00000000}, - {0x191, "IVOR1", 0x00000000, 0x00000000}, - {0x192, "IVOR2", 0x00000000, 0x00000000}, - {0x193, "IVOR3", 0x00000000, 0x00000000}, - {0x194, "IVOR4", 0x00000000, 0x00000000}, - {0x195, "IVOR5", 0x00000000, 0x00000000}, - {0x196, "IVOR6", 0x00000000, 0x00000000}, - {0x197, "IVOR7", 0x00000000, 0x00000000}, - {0x198, "IVOR8", 0x00000000, 0x00000000}, + {0x190, "IVOR0", 0x0000fff0, 0x00000100}, + {0x191, "IVOR1", 0x0000fff0, 0x00000200}, + {0x192, "IVOR2", 0x0000fff0, 0x00000300}, + {0x193, "IVOR3", 0x0000fff0, 0x00000400}, + {0x194, "IVOR4", 0x0000fff0, 0x00000500}, + {0x195, "IVOR5", 0x0000fff0, 0x00000600}, + {0x196, "IVOR6", 0x0000fff0, 0x00000700}, + {0x197, "IVOR7", 0x0000fff0, 0x00000800}, + {0x198, "IVOR8", 0x0000fff0, 0x00000c00}, {0x199, "IVOR9", 0x00000000, 0x00000000}, - {0x19a, "IVOR10", 0x00000000, 0x00000000}, + {0x19a, "IVOR10", 0x0000fff0, 0x00000900}, {0x19b, "IVOR11", 0x00000000, 0x00000000}, {0x19c, "IVOR12", 0x00000000, 0x00000000}, - {0x19d, "IVOR13", 0x00000000, 0x00000000}, - {0x19e, "IVOR14", 0x00000000, 0x00000000}, - {0x19f, "IVOR15", 0x00000000, 0x00000000}, + {0x19d, "IVOR13", 0x0000fff0, 0x00001300}, + {0x19e, "IVOR14", 0x0000fff0, 0x00001400}, + {0x19f, "IVOR15", 0x0000fff0, 0x00002000}, {0x23a, "MCSRR0", 0x00000000, 0x00000000}, {0x23b, "MCSRR1", 0x00000000, 0x00000000}, {0x23c, "MCSR", 0x00000000, 0x00000000}, @@ -126,8 +132,8 @@ static struct {0x395, "DTV1", 0x00000000, 0x00000000}, {0x396, "DTV2", 0x00000000, 0x00000000}, {0x397, "DTV3", 0x00000000, 0x00000000}, - {0x398, "DVLIM", 0x00000000, 0x00000000}, - {0x399, "IVLIM", 0x00000000, 0x00000000}, + {0x398, "DVLIM", 0x0fc1f83f, 0x0001f800}, + {0x399, "IVLIM", 0x0fc1f83f, 0x0001f800}, {0x39b, "RSTCFG", 0x00000000, 0x00000000}, {0x39c, "DCDBTRL", 0x00000000, 0x00000000}, {0x39d, "DCDBTRH", 0x00000000, 0x00000000}, @@ -172,5 +178,6 @@ int spr_post_test (int flags) return ret; } + #endif /* CONFIG_POST & CFG_POST_SPR */ #endif /* CONFIG_POST */ diff --git a/post/cpu/ppc4xx/uart.c b/post/cpu/ppc4xx/uart.c index f220dba17ab..b047d42dfd3 100644 --- a/post/cpu/ppc4xx/uart.c +++ b/post/cpu/ppc4xx/uart.c @@ -2,6 +2,8 @@ * (C) Copyright 2007 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * + * Author: Igor Lisitsin + * * See file CREDITS for list of people who contributed to this * project. * @@ -210,5 +212,4 @@ int uart_post_test (int flags) } #endif /* CONFIG_POST & CFG_POST_UART */ - #endif /* CONFIG_POST */ diff --git a/post/cpu/ppc4xx/watchdog.c b/post/cpu/ppc4xx/watchdog.c index 3c76cfd3484..bd4f4c9856b 100644 --- a/post/cpu/ppc4xx/watchdog.c +++ b/post/cpu/ppc4xx/watchdog.c @@ -2,6 +2,8 @@ * (C) Copyright 2007 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * + * Author: Igor Lisitsin + * * See file CREDITS for list of people who contributed to this * project. * @@ -36,17 +38,18 @@ #ifdef CONFIG_POST #include -#include #if CONFIG_POST & CFG_POST_WATCHDOG +#include + int watchdog_post_test (int flags) { if (flags & POST_REBOOT) { /* Test passed */ - return 0; - } else { + } + else { /* 10-second delay */ int ints = disable_interrupts (); ulong base = post_time_ms (0); diff --git a/post/drivers/Makefile b/post/drivers/Makefile index 068fa98b14c..cb2f1deacd7 100644 --- a/post/drivers/Makefile +++ b/post/drivers/Makefile @@ -26,6 +26,6 @@ SUBDIRS = LIB = libpostdrivers.a -COBJS = cache.o i2c.o memory.o rtc.o +COBJS = i2c.o memory.o rtc.o include $(TOPDIR)/post/rules.mk diff --git a/post/drivers/cache.c b/post/drivers/cache.c deleted file mode 100644 index 501465c06a1..00000000000 --- a/post/drivers/cache.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include - -/* Cache test - * - * This test verifies the CPU data and instruction cache using - * several test scenarios. - */ - -#ifdef CONFIG_POST - -#include -#include - -#if CONFIG_POST & CFG_POST_CACHE - -#define CACHE_POST_SIZE 1024 - -extern int cache_post_test1 (char *, unsigned int); -extern int cache_post_test2 (char *, unsigned int); -extern int cache_post_test3 (char *, unsigned int); -extern int cache_post_test4 (char *, unsigned int); -extern int cache_post_test5 (void); -extern int cache_post_test6 (void); - -int cache_post_test (int flags) -{ - int ints = disable_interrupts (); - int res = 0; - static char ta[CACHE_POST_SIZE + 0xf]; - char *testarea = (char *) (((unsigned long) ta + 0xf) & ~0xf); - - WATCHDOG_RESET (); - if (res == 0) - res = cache_post_test1 (testarea, CACHE_POST_SIZE); - WATCHDOG_RESET (); - if (res == 0) - res = cache_post_test2 (testarea, CACHE_POST_SIZE); - WATCHDOG_RESET (); - if (res == 0) - res = cache_post_test3 (testarea, CACHE_POST_SIZE); - WATCHDOG_RESET (); - if (res == 0) - res = cache_post_test4 (testarea, CACHE_POST_SIZE); - WATCHDOG_RESET (); - if (res == 0) - res = cache_post_test5 (); - WATCHDOG_RESET (); - if (res == 0) - res = cache_post_test6 (); - - WATCHDOG_RESET (); - if (ints) - enable_interrupts (); - return res; -} - -#endif /* CONFIG_POST & CFG_POST_CACHE */ -#endif /* CONFIG_POST */ diff --git a/post/lib_ppc/Makefile b/post/lib_ppc/Makefile index 14354a03236..9f1b329d70b 100644 --- a/post/lib_ppc/Makefile +++ b/post/lib_ppc/Makefile @@ -21,6 +21,7 @@ # MA 02111-1307 USA # +SUBDIRS = fpu LIB = libpostppc.a diff --git a/post/lib_ppc/fpu/20001122-1.c b/post/lib_ppc/fpu/20001122-1.c new file mode 100644 index 00000000000..f689b8232ff --- /dev/null +++ b/post/lib_ppc/fpu/20001122-1.c @@ -0,0 +1,62 @@ +/* + * Copyright (C) 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +/* + * This file is originally a part of the GCC testsuite. + */ + +#include + +#ifdef CONFIG_POST + +#include + +#if CONFIG_POST & CFG_POST_FPU + +int fpu_post_test_math1 (void) +{ + volatile double a, *p; + double c, d; + volatile double b; + + d = 1.0; + p = &b; + + do + { + c = d; + d = c * 0.5; + b = 1 + d; + } while (b != 1.0); + + a = 1.0 + c; + + if (a == 1.0) { + post_log ("Error in FPU math1 test\n"); + return -1; + } + + return 0; +} + +#endif /* CONFIG_POST & CFG_POST_FPU */ +#endif /* CONFIG_POST */ diff --git a/post/lib_ppc/fpu/20010114-2.c b/post/lib_ppc/fpu/20010114-2.c new file mode 100644 index 00000000000..6e60507f9ca --- /dev/null +++ b/post/lib_ppc/fpu/20010114-2.c @@ -0,0 +1,66 @@ +/* + * Copyright (C) 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +/* + * This file is originally a part of the GCC testsuite. + */ + +#include + +#ifdef CONFIG_POST + +#include + +#if CONFIG_POST & CFG_POST_FPU + +static float rintf (float x) +{ + volatile float TWO23 = 8388608.0; + + if (__builtin_fabs (x) < TWO23) + { + if (x > 0.0) + { + x += TWO23; + x -= TWO23; + } + else if (x < 0.0) + { + x = TWO23 - x; + x = -(x - TWO23); + } + } + + return x; +} + +int fpu_post_test_math2 (void) +{ + if (rintf (-1.5) != -2.0) { + post_log ("Error in FPU math2 test\n"); + return -1; + } + return 0; +} + +#endif /* CONFIG_POST & CFG_POST_FPU */ +#endif /* CONFIG_POST */ diff --git a/post/lib_ppc/fpu/20010226-1.c b/post/lib_ppc/fpu/20010226-1.c new file mode 100644 index 00000000000..b2c47e3658a --- /dev/null +++ b/post/lib_ppc/fpu/20010226-1.c @@ -0,0 +1,54 @@ +/* + * Copyright (C) 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +/* + * This file is originally a part of the GCC testsuite. + */ + +#include + +#ifdef CONFIG_POST + +#include + +#if CONFIG_POST & CFG_POST_FPU + +int fpu_post_test_math3 (void) +{ + volatile long double dfrom = 1.1; + volatile long double m1; + volatile long double m2; + volatile unsigned long mant_long; + + m1 = dfrom / 2.0; + m2 = m1 * 4294967296.0; + mant_long = ((unsigned long) m2) & 0xffffffff; + + if (mant_long != 0x8ccccccc) { + post_log ("Error in FPU math3 test\n"); + return -1; + } + return 0; +} + +#endif /* CONFIG_POST & CFG_POST_FPU */ +#endif /* CONFIG_POST */ diff --git a/post/lib_ppc/fpu/980619-1.c b/post/lib_ppc/fpu/980619-1.c new file mode 100644 index 00000000000..990aa0c9899 --- /dev/null +++ b/post/lib_ppc/fpu/980619-1.c @@ -0,0 +1,60 @@ +/* + * Copyright (C) 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +/* + * This file is originally a part of the GCC testsuite. + */ + +#include + +#ifdef CONFIG_POST + +#include + +#if CONFIG_POST & CFG_POST_FPU + +int fpu_post_test_math4 (void) +{ + volatile float reale = 1.0f; + volatile float oneplus; + int i; + + if (sizeof (float) != 4) + return 0; + + for (i = 0; ; i++) + { + oneplus = 1.0f + reale; + if (oneplus == 1.0f) + break; + reale = reale / 2.0f; + } + /* Assumes ieee754 accurate arithmetic above. */ + if (i != 24) { + post_log ("Error in FPU math4 test\n"); + return -1; + } + return 0; +} + +#endif /* CONFIG_POST & CFG_POST_FPU */ +#endif /* CONFIG_POST */ diff --git a/post/lib_ppc/fpu/Makefile b/post/lib_ppc/fpu/Makefile new file mode 100644 index 00000000000..82646c80d65 --- /dev/null +++ b/post/lib_ppc/fpu/Makefile @@ -0,0 +1,32 @@ +# +# (C) Copyright 2007 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + + +LIB = libpostppcfpu.a + +COBJS += fpu.o 20001122-1.o 20010114-2.o 20010226-1.o 980619-1.o +COBJS += acc1.o compare-fp-1.o mul-subnormal-single-1.o + +include $(TOPDIR)/post/rules.mk + +CFLAGS += -mhard-float -fkeep-inline-functions diff --git a/post/lib_ppc/fpu/acc1.c b/post/lib_ppc/fpu/acc1.c new file mode 100644 index 00000000000..4cecbf6a4fe --- /dev/null +++ b/post/lib_ppc/fpu/acc1.c @@ -0,0 +1,57 @@ +/* + * Copyright (C) 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +/* + * This file is originally a part of the GCC testsuite. + */ + +#include + +#ifdef CONFIG_POST + +#include + +#if CONFIG_POST & CFG_POST_FPU + +static double func (const double *array) +{ + double d = *array; + + if (d == 0.0) + return d; + else + return d + func (array + 1); +} + +int fpu_post_test_math5 (void) +{ + double values[] = { 0.1e-100, 1.0, -1.0, 0.0 }; + + if (func (values) != 0.1e-100) { + post_log ("Error in FPU math5 test\n"); + return -1; + } + return 0; +} + +#endif /* CONFIG_POST & CFG_POST_FPU */ +#endif /* CONFIG_POST */ diff --git a/post/lib_ppc/fpu/compare-fp-1.c b/post/lib_ppc/fpu/compare-fp-1.c new file mode 100644 index 00000000000..d866ad5a36b --- /dev/null +++ b/post/lib_ppc/fpu/compare-fp-1.c @@ -0,0 +1,225 @@ +/* + * Copyright (C) 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +/* + * Test for correctness of composite floating-point comparisons. + * Written by Paolo Bonzini, 26th May 2004. + * This file is originally a part of the GCC testsuite. + */ + +#include + +#ifdef CONFIG_POST + +#include + +#if CONFIG_POST & CFG_POST_FPU + +static int failed; + +#define TEST(c) if ((c) != ok) failed++ +#define ORD(a, b) (!__builtin_isunordered ((a), (b))) +#define UNORD(a, b) (__builtin_isunordered ((a), (b))) +#define UNEQ(a, b) (__builtin_isunordered ((a), (b)) || ((a) == (b))) +#define UNLT(a, b) (__builtin_isunordered ((a), (b)) || ((a) < (b))) +#define UNLE(a, b) (__builtin_isunordered ((a), (b)) || ((a) <= (b))) +#define UNGT(a, b) (__builtin_isunordered ((a), (b)) || ((a) > (b))) +#define UNGE(a, b) (__builtin_isunordered ((a), (b)) || ((a) >= (b))) +#define LTGT(a, b) (__builtin_islessgreater ((a), (b))) + +static float pinf; +static float ninf; +static float NaN; + +static void iuneq (float x, float y, int ok) +{ + TEST (UNEQ (x, y)); + TEST (!LTGT (x, y)); + TEST (UNLE (x, y) && UNGE (x,y)); +} + +static void ieq (float x, float y, int ok) +{ + TEST (ORD (x, y) && UNEQ (x, y)); +} + +static void iltgt (float x, float y, int ok) +{ + TEST (!UNEQ (x, y)); /* Not optimizable. */ + TEST (LTGT (x, y)); /* Same, __builtin_islessgreater does not trap. */ + TEST (ORD (x, y) && (UNLT (x, y) || UNGT (x,y))); +} + +static void ine (float x, float y, int ok) +{ + TEST (UNLT (x, y) || UNGT (x, y)); +} + +static void iunlt (float x, float y, int ok) +{ + TEST (UNLT (x, y)); + TEST (UNORD (x, y) || (x < y)); +} + +static void ilt (float x, float y, int ok) +{ + TEST (ORD (x, y) && UNLT (x, y)); /* Not optimized */ + TEST ((x <= y) && (x != y)); + TEST ((x <= y) && (y != x)); + TEST ((x != y) && (x <= y)); /* Not optimized */ + TEST ((y != x) && (x <= y)); /* Not optimized */ +} + +static void iunle (float x, float y, int ok) +{ + TEST (UNLE (x, y)); + TEST (UNORD (x, y) || (x <= y)); +} + +static void ile (float x, float y, int ok) +{ + TEST (ORD (x, y) && UNLE (x, y)); /* Not optimized */ + TEST ((x < y) || (x == y)); + TEST ((y > x) || (x == y)); + TEST ((x == y) || (x < y)); /* Not optimized */ + TEST ((y == x) || (x < y)); /* Not optimized */ +} + +static void iungt (float x, float y, int ok) +{ + TEST (UNGT (x, y)); + TEST (UNORD (x, y) || (x > y)); +} + +static void igt (float x, float y, int ok) +{ + TEST (ORD (x, y) && UNGT (x, y)); /* Not optimized */ + TEST ((x >= y) && (x != y)); + TEST ((x >= y) && (y != x)); + TEST ((x != y) && (x >= y)); /* Not optimized */ + TEST ((y != x) && (x >= y)); /* Not optimized */ +} + +static void iunge (float x, float y, int ok) +{ + TEST (UNGE (x, y)); + TEST (UNORD (x, y) || (x >= y)); +} + +static void ige (float x, float y, int ok) +{ + TEST (ORD (x, y) && UNGE (x, y)); /* Not optimized */ + TEST ((x > y) || (x == y)); + TEST ((y < x) || (x == y)); + TEST ((x == y) || (x > y)); /* Not optimized */ + TEST ((y == x) || (x > y)); /* Not optimized */ +} + +int fpu_post_test_math6 (void) +{ + pinf = __builtin_inf (); + ninf = -__builtin_inf (); + NaN = __builtin_nan (""); + + iuneq (ninf, pinf, 0); + iuneq (NaN, NaN, 1); + iuneq (pinf, ninf, 0); + iuneq (1, 4, 0); + iuneq (3, 3, 1); + iuneq (5, 2, 0); + + ieq (1, 4, 0); + ieq (3, 3, 1); + ieq (5, 2, 0); + + iltgt (ninf, pinf, 1); + iltgt (NaN, NaN, 0); + iltgt (pinf, ninf, 1); + iltgt (1, 4, 1); + iltgt (3, 3, 0); + iltgt (5, 2, 1); + + ine (1, 4, 1); + ine (3, 3, 0); + ine (5, 2, 1); + + iunlt (NaN, ninf, 1); + iunlt (pinf, NaN, 1); + iunlt (pinf, ninf, 0); + iunlt (pinf, pinf, 0); + iunlt (ninf, ninf, 0); + iunlt (1, 4, 1); + iunlt (3, 3, 0); + iunlt (5, 2, 0); + + ilt (1, 4, 1); + ilt (3, 3, 0); + ilt (5, 2, 0); + + iunle (NaN, ninf, 1); + iunle (pinf, NaN, 1); + iunle (pinf, ninf, 0); + iunle (pinf, pinf, 1); + iunle (ninf, ninf, 1); + iunle (1, 4, 1); + iunle (3, 3, 1); + iunle (5, 2, 0); + + ile (1, 4, 1); + ile (3, 3, 1); + ile (5, 2, 0); + + iungt (NaN, ninf, 1); + iungt (pinf, NaN, 1); + iungt (pinf, ninf, 1); + iungt (pinf, pinf, 0); + iungt (ninf, ninf, 0); + iungt (1, 4, 0); + iungt (3, 3, 0); + iungt (5, 2, 1); + + igt (1, 4, 0); + igt (3, 3, 0); + igt (5, 2, 1); + + iunge (NaN, ninf, 1); + iunge (pinf, NaN, 1); + iunge (ninf, pinf, 0); + iunge (pinf, pinf, 1); + iunge (ninf, ninf, 1); + iunge (1, 4, 0); + iunge (3, 3, 1); + iunge (5, 2, 1); + + ige (1, 4, 0); + ige (3, 3, 1); + ige (5, 2, 1); + + if (failed) { + post_log ("Error in FPU math6 test\n"); + return -1; + } + return 0; +} + +#endif /* CONFIG_POST & CFG_POST_FPU */ +#endif /* CONFIG_POST */ diff --git a/post/lib_ppc/fpu/fpu.c b/post/lib_ppc/fpu/fpu.c new file mode 100644 index 00000000000..07dcba8cc92 --- /dev/null +++ b/post/lib_ppc/fpu/fpu.c @@ -0,0 +1,92 @@ +/* + * Copyright (C) 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Author: Sergei Poselenov + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +/* + * FPU test + * + * This test checks the arithmetic logic unit (ALU) of CPU. + * It tests independently various groups of instructions using + * run-time modification of the code to reduce the memory footprint. + * For more details refer to post/cpu/ *.c files. + */ + +#ifdef CONFIG_POST + +#include + +#if CONFIG_POST & CFG_POST_FPU + +#include + +extern int fpu_status (void); +extern void fpu_enable (void); +extern void fpu_disable (void); + +extern int fpu_post_test_math1 (void); +extern int fpu_post_test_math2 (void); +extern int fpu_post_test_math3 (void); +extern int fpu_post_test_math4 (void); +extern int fpu_post_test_math5 (void); +extern int fpu_post_test_math6 (void); +extern int fpu_post_test_math7 (void); + +int fpu_post_test (int flags) +{ + int fpu = fpu_status (); + + int ret = 0; + + WATCHDOG_RESET (); + + if (!fpu) + fpu_enable (); + + if (ret == 0) + ret = fpu_post_test_math1 (); + if (ret == 0) + ret = fpu_post_test_math2 (); + if (ret == 0) + ret = fpu_post_test_math3 (); + if (ret == 0) + ret = fpu_post_test_math4 (); + if (ret == 0) + ret = fpu_post_test_math5 (); + if (ret == 0) + ret = fpu_post_test_math6 (); + if (ret == 0) + ret = fpu_post_test_math7 (); + + if (!fpu) + fpu_disable (); + + WATCHDOG_RESET (); + + return ret; +} + +#endif /* CONFIG_POST & CFG_POST_FPU */ +#endif /* CONFIG_POST */ diff --git a/post/lib_ppc/fpu/mul-subnormal-single-1.c b/post/lib_ppc/fpu/mul-subnormal-single-1.c new file mode 100644 index 00000000000..67f48da3352 --- /dev/null +++ b/post/lib_ppc/fpu/mul-subnormal-single-1.c @@ -0,0 +1,103 @@ +/* + * Copyright (C) 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +/* + * This file is originally a part of the GCC testsuite. + * Check that certain subnormal numbers (formerly known as denormalized + * numbers) are rounded to within 0.5 ulp. PR other/14354. + */ + +#include + +#ifdef CONFIG_POST + +#include + +#if CONFIG_POST & CFG_POST_FPU + +union uf +{ + unsigned int u; + float f; +}; + +static float +u2f (unsigned int v) +{ + union uf u; + u.u = v; + return u.f; +} + +static unsigned int +f2u (float v) +{ + union uf u; + u.f = v; + return u.u; +} + +static int ok = 1; + +static void +tstmul (unsigned int ux, unsigned int uy, unsigned int ur) +{ + float x = u2f (ux); + float y = u2f (uy); + + if (f2u (x * y) != ur) + /* Set a variable rather than aborting here, to simplify tracing when + several computations are wrong. */ + ok = 0; +} + +/* We don't want to make this const and static, or else we risk inlining + causing the test to fold as constants at compile-time. */ +struct +{ + unsigned int p1, p2, res; +} static volatile expected[] = +{ + {0xfff, 0x3f800400, 0xfff}, + {0xf, 0x3fc88888, 0x17}, + {0xf, 0x3f844444, 0xf} +}; + +int fpu_post_test_math7 (void) +{ + unsigned int i; + + for (i = 0; i < sizeof (expected) / sizeof (expected[0]); i++) + { + tstmul (expected[i].p1, expected[i].p2, expected[i].res); + tstmul (expected[i].p2, expected[i].p1, expected[i].res); + } + + if (!ok) { + post_log ("Error in FPU math7 test\n"); + return -1; + } + return 0; +} + +#endif /* CONFIG_POST & CFG_POST_FPU */ +#endif /* CONFIG_POST */ -- cgit v1.3.1 From be296e31c4411f96d9cb3d2afc8fcb006867abfa Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 5 Jul 2007 22:24:58 -0500 Subject: Revert file mode Changed MAKEALL file mode to executable, removed executable file mode from Makefile Signed-off-by: TsiChungLiew --- MAKEALL | 0 Makefile | 0 2 files changed, 0 insertions(+), 0 deletions(-) mode change 100644 => 100755 MAKEALL mode change 100755 => 100644 Makefile (limited to 'Makefile') diff --git a/MAKEALL b/MAKEALL old mode 100644 new mode 100755 diff --git a/Makefile b/Makefile old mode 100755 new mode 100644 -- cgit v1.3.1 From 96e1d75be8193ca79e4215a368bf9d7f2362450f Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Wed, 11 Jul 2007 18:39:11 +0200 Subject: [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed - now the Flash ST M29W040B is supported (not tested) - fix the "led" command - fix compile error, if BUILD_DIR is used Signed-off-by: Heiko Schocher --- Makefile | 2 +- board/pcs440ep/flash.c | 11 +++++++++ board/pcs440ep/pcs440ep.c | 37 ++++++++++++++++++++++-------- doc/README.sha1 | 57 ++++++++++++++++++++++++++++++++++++++++++++++ include/configs/pcs440ep.h | 8 +++---- 5 files changed, 101 insertions(+), 14 deletions(-) create mode 100644 doc/README.sha1 (limited to 'Makefile') diff --git a/Makefile b/Makefile index 47e4e670abd..c45700e08d6 100644 --- a/Makefile +++ b/Makefile @@ -268,7 +268,7 @@ $(obj)u-boot.img: $(obj)u-boot.bin -d $< $@ $(obj)u-boot.sha1: $(obj)u-boot.bin - ./tools/ubsha1 $(obj)u-boot.bin + $(obj)./tools/ubsha1 $(obj)u-boot.bin $(obj)u-boot.dis: $(obj)u-boot $(OBJDUMP) -d $< > $@ diff --git a/board/pcs440ep/flash.c b/board/pcs440ep/flash.c index 70014407c6e..c5a62e25436 100644 --- a/board/pcs440ep/flash.c +++ b/board/pcs440ep/flash.c @@ -82,6 +82,7 @@ void flash_print_info(flash_info_t *info) case FLASH_MAN_AMD: printf ("AMD "); break; case FLASH_MAN_FUJ: printf ("FUJITSU "); break; case FLASH_MAN_SST: printf ("SST "); break; + case FLASH_MAN_STM: printf ("ST Micro"); break; case FLASH_MAN_EXCEL: printf ("Excel Semiconductor "); break; case FLASH_MAN_MX: printf ("MXIC "); break; default: printf ("Unknown Vendor "); break; @@ -118,6 +119,8 @@ void flash_print_info(flash_info_t *info) break; case FLASH_SST040: printf ("SST39LF/VF040 (4 Mbit, uniform sector size)\n"); break; + case STM_ID_M29W040B: printf ("ST Micro M29W040B (4 Mbit, uniform sector size)\n"); + break; default: printf ("Unknown Chip Type\n"); break; } @@ -193,6 +196,9 @@ static ulong flash_get_size(vu_long *addr, flash_info_t *info) case (CFG_FLASH_WORD_SIZE)SST_MANUFACT: info->flash_id = FLASH_MAN_SST; break; + case (CFG_FLASH_WORD_SIZE)STM_MANUFACT: + info->flash_id = FLASH_MAN_STM; + break; case (CFG_FLASH_WORD_SIZE)EXCEL_MANUFACT: info->flash_id = FLASH_MAN_EXCEL; break; @@ -226,6 +232,11 @@ static ulong flash_get_size(vu_long *addr, flash_info_t *info) info->sector_count = 8; info->size = 0x0080000; /* => 0.5 MB */ break; + case (CFG_FLASH_WORD_SIZE)STM_ID_M29W040B: + info->flash_id += FLASH_AM040; + info->sector_count = 8; + info->size = 0x0080000; /* => 0,5 MB */ + break; case (CFG_FLASH_WORD_SIZE)AMD_ID_LV800T: info->flash_id += FLASH_AM800T; diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c index ada6b82c927..0e34a76cb9f 100644 --- a/board/pcs440ep/pcs440ep.c +++ b/board/pcs440ep/pcs440ep.c @@ -85,8 +85,9 @@ static void status_led_blink (void) /* set all LED which are on, to state BLINKING */ for (i = 0; i < 4; i++) { - if (val & 0x08) status_led_set (i, STATUS_LED_BLINKING); - val = val << 1; + if (val & 0x01) status_led_set (3 - i, STATUS_LED_BLINKING); + else status_led_set (3 - i, STATUS_LED_OFF); + val = val >> 1; } } @@ -113,12 +114,14 @@ void show_boot_progress (int val) status_led_set (1, STATUS_LED_ON); status_led_set (2, STATUS_LED_ON); break; +#if 0 case 64: /* starting Ethernet configuration */ status_led_set (0, STATUS_LED_OFF); status_led_set (1, STATUS_LED_OFF); status_led_set (2, STATUS_LED_ON); break; +#endif case 80: /* loading Image */ status_led_set (0, STATUS_LED_ON); @@ -404,6 +407,9 @@ static void pcs440ep_checksha1 (void) int ret; char *cs_test; + status_led_set (0, STATUS_LED_OFF); + status_led_set (1, STATUS_LED_OFF); + status_led_set (2, STATUS_LED_ON); ret = pcs440ep_sha1 (1); if (ret == 0) return; @@ -751,28 +757,41 @@ void hw_watchdog_reset(void) ************************************************************************/ int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { - int rcode = 0; + int rcode = 0, i; ulong pattern = 0; - pattern = simple_strtoul (argv[1], NULL, 10); - if (pattern > 200) { + pattern = simple_strtoul (argv[1], NULL, 16); + if (pattern > 0x400) { + int val = GET_LEDS; + printf ("led: %x\n", val); + return rcode; + } + if (pattern > 0x200) { status_led_blink (); hang (); return rcode; } - if (pattern > 100) { + if (pattern > 0x100) { status_led_blink (); return rcode; } pattern &= 0x0f; - set_leds (pattern); + for (i = 0; i < 4; i++) { + if (pattern & 0x01) status_led_set (i, STATUS_LED_ON); + else status_led_set (i, STATUS_LED_OFF); + pattern = pattern >> 1; + } return rcode; } U_BOOT_CMD( led, 2, 1, do_led, - "led - set the led\n", - NULL + "led [bitmask] - set the DIAG-LED\n", + "[bitmask] 0x01 = DIAG 1 on\n" + " 0x02 = DIAG 2 on\n" + " 0x04 = DIAG 3 on\n" + " 0x08 = DIAG 4 on\n" + " > 0x100 set the LED, who are on, to state blinking\n" ); #if defined(CONFIG_SHA1_CHECK_UB_IMG) diff --git a/doc/README.sha1 b/doc/README.sha1 new file mode 100644 index 00000000000..92dc8fffaea --- /dev/null +++ b/doc/README.sha1 @@ -0,0 +1,57 @@ +SHA1 usage: +----------- + +In the U-Boot Image for the pcs440ep board is a SHA1 checksum integrated. +This SHA1 sum is used, to check, if the U-Boot Image in Flash is not +corrupted. + +The following command is available: + +=> help sha1 +sha1 address len [addr] calculate the SHA1 sum [save at addr] + -p calculate the SHA1 sum from the U-Boot image in flash and print + -c check the U-Boot image in flash + +"sha1 -p" + calculates and prints the SHA1 sum, from the Image stored in Flash + +"sha1 -c" + check, if the SHA1 sum from the Image stored in Flash is correct + + +It is possible to calculate a SHA1 checksum from a memoryrange with: + +"sha1 address len" + +If you want to store a new Image in Flash for the pcs440ep board, +which has no SHA1 sum, you can do the following: + +a) cp the new Image on a position in RAM (here 0x300000) + (for this example we use the Image from Flash, stored at 0xfffa0000 and + 0x60000 Bytes long) + +"cp.b fffa0000 300000 60000" + +b) Initialize the SHA1 sum in the Image with 0x00 + The SHA1 sum is stored in Flash at: + CFG_MONITOR_BASE + CFG_MONITOR_LEN + SHA1_SUM_POS + for the pcs440ep Flash: 0xfffa0000 + 0x60000 + -0x20 + = 0xffffffe0 + for the example in RAM: 0x300000 + 0x60000 + -0x20 + = 0x35ffe0 + + note: a SHA1 checksum is 20 bytes long. + +"mw.b 35ffe0 0 14" + +c) now calculate the SHA1 sum from the memoryrange and write + the calculated checksum at the right place: + +"sha1 300000 60000 35ffe0" + +Now you have a U-Boot-Image for the pcs440ep board with the correct SHA1 sum. + +If you do a "./MAKEALL pcs440ep" or a "make all" to get the U-Boot image, +the correct SHA1 sum will be automagically included in the U-Boot image. + +Heiko Schocher, 11 Jul 2007 diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h index 69d97d66ea1..5ee97c12794 100644 --- a/include/configs/pcs440ep.h +++ b/include/configs/pcs440ep.h @@ -197,16 +197,16 @@ #define CONFIG_STATUS_LED 1 /* Status LED enabled */ #define CONFIG_BOARD_SPECIFIC_LED 1 -#define STATUS_LED_BIT 0x08 /* LED 1 is on GPIO_PPC_1 */ +#define STATUS_LED_BIT 0x08 /* DIAG1 is on GPIO_PPC_1 */ #define STATUS_LED_PERIOD ((CFG_HZ / 2) / 5) /* blink at 5 Hz */ #define STATUS_LED_STATE STATUS_LED_OFF -#define STATUS_LED_BIT1 0x04 /* LED 2 is on GPIO_PPC_2 */ +#define STATUS_LED_BIT1 0x04 /* DIAG2 is on GPIO_PPC_2 */ #define STATUS_LED_PERIOD1 ((CFG_HZ / 2) / 5) /* blink at 5 Hz */ #define STATUS_LED_STATE1 STATUS_LED_ON -#define STATUS_LED_BIT2 0x02 /* LED 3 is on GPIO_PPC_3 */ +#define STATUS_LED_BIT2 0x02 /* DIAG3 is on GPIO_PPC_3 */ #define STATUS_LED_PERIOD2 ((CFG_HZ / 2) / 5) /* blink at 5 Hz */ #define STATUS_LED_STATE2 STATUS_LED_OFF -#define STATUS_LED_BIT3 0x01 /* LED 4 is on GPIO_PPC_4 */ +#define STATUS_LED_BIT3 0x01 /* DIAG4 is on GPIO_PPC_4 */ #define STATUS_LED_PERIOD3 ((CFG_HZ / 2) / 5) /* blink at 5 Hz */ #define STATUS_LED_STATE3 STATUS_LED_OFF -- cgit v1.3.1 From fa1df308926a6f70e3504c57514ef27ac31fd13a Mon Sep 17 00:00:00 2001 From: Bartlomiej Sieka Date: Wed, 11 Jul 2007 20:11:07 +0200 Subject: CM1.QP1: Support for the Schindler CM1.QP1 board. Signed-off-by: Piotr Kruszynski Signed-off-by: Bartlomiej Sieka --- MAKEALL | 12 +- Makefile | 8 + board/cm1_qp1/Makefile | 50 +++++ board/cm1_qp1/cm1_qp1.c | 222 ++++++++++++++++++++++ board/cm1_qp1/cmd_cm1_qp1.c | 446 ++++++++++++++++++++++++++++++++++++++++++++ board/cm1_qp1/config.mk | 26 +++ board/cm1_qp1/fwupdate.c | 187 +++++++++++++++++++ board/cm1_qp1/fwupdate.h | 47 +++++ board/cm1_qp1/u-boot.lds | 123 ++++++++++++ cpu/mpc5xxx/fec.c | 21 ++- include/configs/cm1_qp1.h | 358 +++++++++++++++++++++++++++++++++++ 11 files changed, 1487 insertions(+), 13 deletions(-) create mode 100644 board/cm1_qp1/Makefile create mode 100644 board/cm1_qp1/cm1_qp1.c create mode 100644 board/cm1_qp1/cmd_cm1_qp1.c create mode 100644 board/cm1_qp1/config.mk create mode 100644 board/cm1_qp1/fwupdate.c create mode 100644 board/cm1_qp1/fwupdate.h create mode 100644 board/cm1_qp1/u-boot.lds create mode 100644 include/configs/cm1_qp1.h (limited to 'Makefile') diff --git a/MAKEALL b/MAKEALL index f931e1dd71e..127faa83a32 100755 --- a/MAKEALL +++ b/MAKEALL @@ -35,12 +35,12 @@ LIST_5xx=" \ ######################################################################### LIST_5xxx=" \ - BC3450 cpci5200 EVAL5200 fo300 \ - icecube_5100 icecube_5200 lite5200b mcc200 \ - mecp5200 motionpro o2dnt pf5200 \ - PM520 TB5200 Total5100 Total5200 \ - Total5200_Rev2 TQM5200 TQM5200_B TQM5200S \ - v38b \ + BC3450 cm1_qp1 cpci5200 EVAL5200 \ + fo300 icecube_5100 icecube_5200 lite5200b \ + mcc200 mecp5200 motionpro o2dnt \ + pf5200 PM520 TB5200 Total5100 \ + Total5200 Total5200_Rev2 TQM5200 TQM5200_B \ + TQM5200S v38b \ " ######################################################################### diff --git a/Makefile b/Makefile index 626283f708b..9c1a0b2a37e 100644 --- a/Makefile +++ b/Makefile @@ -529,6 +529,14 @@ PM520_ROMBOOT_DDR_config: unconfig smmaco4_config: unconfig @$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200 +cm1_qp1_config: unconfig + @ >include/config.h + @[ -z "$(findstring cm1_qp1,$@)" ] || \ + { echo "... with 64 MByte SDRAM" ; \ + echo "... with 32 MByte Flash" ; \ + } + @./mkconfig -a cm1_qp1 ppc mpc5xxx cm1_qp1 + spieval_config: unconfig @$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200 diff --git a/board/cm1_qp1/Makefile b/board/cm1_qp1/Makefile new file mode 100644 index 00000000000..e7393267e7a --- /dev/null +++ b/board/cm1_qp1/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2003-2007 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o cmd_cm1_qp1.o fwupdate.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/cm1_qp1/cm1_qp1.c b/board/cm1_qp1/cm1_qp1.c new file mode 100644 index 00000000000..b49298f64b6 --- /dev/null +++ b/board/cm1_qp1/cm1_qp1.c @@ -0,0 +1,222 @@ +/* + * (C) Copyright 2003-2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004 + * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. + * + * (C) Copyright 2004-2005 + * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#ifdef CONFIG_OF_FLAT_TREE +#include +#endif /* CONFIG_OF_FLAT_TREE */ + +#include "fwupdate.h" + +#ifndef CFG_RAMBOOT +/* + * Helper function to initialize SDRAM controller. + */ +static void sdram_start(int hi_addr) +{ + long hi_addr_bit = hi_addr ? 0x01000000 : 0; + + /* unlock mode register */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | + hi_addr_bit; + + /* precharge all banks */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | + hi_addr_bit; + + /* auto refresh */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | + hi_addr_bit; + + /* auto refresh, second time */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | + hi_addr_bit; + + /* set mode register */ + *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE; + + /* normal operation */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit; +} +#endif /* CFG_RAMBOOT */ + +/* + * Initalize SDRAM - configure SDRAM controller, detect memory size. + */ +long int initdram(int board_type) +{ + ulong dramsize = 0; +#ifndef CFG_RAMBOOT + ulong test1, test2; + + /* configure SDRAM start/end for detection */ + *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */ + + /* setup config registers */ + *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; + *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; + + sdram_start(0); + test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000); + sdram_start(1); + test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000); + if (test1 > test2) { + sdram_start(0); + dramsize = test1; + } else + dramsize = test2; + + /* memory smaller than 1MB is impossible */ + if (dramsize < (1 << 20)) + dramsize = 0; + + /* set SDRAM CS0 size according to the amount of RAM found */ + if (dramsize > 0) { + *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + + __builtin_ffs(dramsize >> 20) - 1; + } else + *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */ +#else /* CFG_RAMBOOT */ + /* retrieve size of memory connected to SDRAM CS0 */ + dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF; + if (dramsize >= 0x13) + dramsize = (1 << (dramsize - 0x13)) << 20; + else + dramsize = 0; +#endif /* CFG_RAMBOOT */ + + /* + * On MPC5200B we need to set the special configuration delay in the + * DDR controller. Refer to chapter 8.7.5 SDelay--MBAR + 0x0190 of + * the MPC5200B User's Manual. + */ + *(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04; + __asm__ volatile ("sync"); + + return dramsize; +} + + +int checkboard(void) +{ + puts("Board: CM1.QP1\n"); + return 0; +} + + +int board_early_init_r(void) +{ + /* + * Now, when we are in RAM, enable flash write access for detection + * process. Note that CS_BOOT cannot be cleared when executing in + * flash. + */ + *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ + return 0; +} + + +#ifdef CONFIG_POST +int post_hotkeys_pressed(void) +{ + return 0; +} +#endif /* CONFIG_POST */ + + +#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER) +void post_word_store(ulong a) +{ + vu_long *save_addr = (vu_long *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE); + *save_addr = a; +} + + +ulong post_word_load(void) +{ + vu_long *save_addr = (vu_long *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE); + return *save_addr; +} +#endif /* CONFIG_POST || CONFIG_LOGBUFFER */ + + +#ifdef CONFIG_MISC_INIT_R +int misc_init_r(void) +{ +#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) + uchar buf[6]; + char str[18]; + + /* Read ethaddr from EEPROM */ + if (i2c_read(CFG_I2C_EEPROM, CONFIG_MAC_OFFSET, 2, buf, 6) == 0) { + sprintf(str, "%02X:%02X:%02X:%02X:%02X:%02X", + buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]); + /* Check if MAC addr is owned by Schindler */ + if (strstr(str, "00:06:C3") != str) { + printf(LOG_PREFIX "Warning - Illegal MAC address (%s)" + " in EEPROM.\n", str); + printf(LOG_PREFIX "Using MAC from environment\n"); + } else { + printf(LOG_PREFIX "Using MAC (%s) from I2C EEPROM\n", + str); + setenv("ethaddr", str); + } + } else { + printf(LOG_PREFIX "Warning - Unable to read MAC from I2C" + " device at address %02X:%04X\n", CFG_I2C_EEPROM, + CONFIG_MAC_OFFSET); + printf(LOG_PREFIX "Using MAC from environment\n"); + } + return 0; +#endif /* defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) */ +} +#endif /* CONFIG_MISC_INIT_R */ + + +#ifdef CONFIG_LAST_STAGE_INIT +int last_stage_init(void) +{ +#ifdef CONFIG_USB_STORAGE + cm1_fwupdate(); +#endif /* CONFIG_USB_STORAGE */ + return 0; +} +#endif /* CONFIG_LAST_STAGE_INIT */ + + +#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ + ft_cpu_setup(blob, bd); +} +#endif /* defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/cm1_qp1/cmd_cm1_qp1.c b/board/cm1_qp1/cmd_cm1_qp1.c new file mode 100644 index 00000000000..4a01d2a7f4c --- /dev/null +++ b/board/cm1_qp1/cmd_cm1_qp1.c @@ -0,0 +1,446 @@ +/* + * (C) Copyright 2007 Markus Kappeler + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include + +#if (CONFIG_COMMANDS & CFG_CMD_BSP) + +int do_i2c(char *argv[]) +{ + unsigned char temp, temp1; + + printf("Starting I2C Test\n" + "Please set Jumper:\nI2C SDA 2-3\nI2C SCL 2-3\n\n" + "Please press any key to start\n\n"); + getc(); + + temp = 0xf0; /* set io 0-4 as output */ + i2c_write(CFG_I2C_IO, 3, 1, (uchar *)&temp, 1); + + printf("Press I2C4-7. LED I2C0-3 should have the same state\n\n" + "Press any key to stop\n\n"); + + while (!tstc()) { + i2c_read(CFG_I2C_IO, 0, 1, (uchar *)&temp, 1); + temp1 = (temp >> 4) & 0x03; + temp1 |= (temp >> 3) & 0x08; /* S302 -> LED303 */ + temp1 |= (temp >> 5) & 0x04; /* S303 -> LED302 */ + temp = temp1; + i2c_write(CFG_I2C_IO, 1, 1, (uchar *)&temp, 1); + } + getc(); + + return 0; +} + +int do_usbtest(char *argv[]) +{ + int i; + static int usb_stor_curr_dev = -1; /* current device */ + + printf("Starting USB Test\n" + "Please insert USB Memmory Stick\n\n" + "Please press any key to start\n\n"); + getc(); + + usb_stop(); + printf("(Re)start USB...\n"); + i = usb_init(); +#ifdef CONFIG_USB_STORAGE + /* try to recognize storage devices immediately */ + if (i >= 0) + usb_stor_curr_dev = usb_stor_scan(1); +#endif /* CONFIG_USB_STORAGE */ + if (usb_stor_curr_dev >= 0) + printf("Found USB Storage Dev continue with Test...\n"); + else { + printf("No USB Storage Device detected.. Stop Test\n"); + return 1; + } + + usb_stor_info(); + + printf("stopping USB..\n"); + usb_stop(); + + return 0; +} + +int do_led(char *argv[]) +{ + int i = 0; + struct mpc5xxx_gpt_0_7 *gpt = (struct mpc5xxx_gpt_0_7 *)MPC5XXX_GPT; + + printf("Starting LED Test\n" + "Please set Switch S500 all off\n\n" + "Please press any key to start\n\n"); + getc(); + + /* configure timer 2-3 for simple GPIO output High */ + gpt->gpt2.emsr |= 0x00000034; + gpt->gpt3.emsr |= 0x00000034; + + (*(vu_long *)MPC5XXX_WU_GPIO_ENABLE) |= 0x80000000; + (*(vu_long *)MPC5XXX_WU_GPIO_DIR) |= 0x80000000; + printf("Please press any key to stop\n\n"); + while (!tstc()) { + if (i == 1) { + (*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) |= 0x80000000; + gpt->gpt2.emsr &= ~0x00000010; + gpt->gpt3.emsr &= ~0x00000010; + } else if (i == 2) { + (*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) &= ~0x80000000; + gpt->gpt2.emsr &= ~0x00000010; + gpt->gpt3.emsr |= 0x00000010; + } else if (i >= 3) { + (*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) &= ~0x80000000; + gpt->gpt3.emsr &= ~0x00000010; + gpt->gpt2.emsr |= 0x00000010; + i = 0; + } + i++; + udelay(200000); + } + getc(); + + (*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) |= 0x80000000; + gpt->gpt2.emsr |= 0x00000010; + gpt->gpt3.emsr |= 0x00000010; + + return 0; +} + +int do_rs232(char *argv[]) +{ + int error_status = 0; + struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO; + struct mpc5xxx_psc *psc1 = (struct mpc5xxx_psc *)MPC5XXX_PSC1; + + /* Configure PSC 2-3-6 as GPIO */ + gpio->port_config &= 0xFF0FF80F; + + switch (simple_strtoul(argv[2], NULL, 10)) { + case 1: + /* check RTS <-> CTS loop */ + /* set rts to 0 */ + printf("Uart 1 test: RX TX tested by using U-Boot\n" + "Please connect RTS with CTS on Uart1 plug\n\n" + "Press any key to start\n\n"); + getc(); + + psc1->op1 |= 0x01; + + /* wait some time before requesting status */ + udelay(10); + + /* check status at cts */ + if ((psc1->ip & 0x01) != 0) { + error_status = 3; + printf("%s: failure at rs232_1, cts status is %d " + "(should be 0)\n", + __FUNCTION__, (psc1->ip & 0x01)); + } + + /* set rts to 1 */ + psc1->op0 |= 0x01; + + /* wait some time before requesting status */ + udelay(10); + + /* check status at cts */ + if ((psc1->ip & 0x01) != 1) { + error_status = 3; + printf("%s: failure at rs232_1, cts status is %d " + "(should be 1)\n", + __FUNCTION__, (psc1->ip & 0x01)); + } + break; + case 2: + /* set PSC2_0, PSC2_2 as output and PSC2_1, PSC2_3 as input */ + printf("Uart 2 test: Please use RS232 Loopback plug on UART2\n" + "\nPress any key to start\n\n"); + getc(); + + gpio->simple_gpioe &= ~(0x000000F0); + gpio->simple_gpioe |= 0x000000F0; + gpio->simple_ddr &= ~(0x000000F0); + gpio->simple_ddr |= 0x00000050; + + /* check TXD <-> RXD loop */ + /* set TXD to 1 */ + gpio->simple_dvo |= (1 << 4); + + /* wait some time before requesting status */ + udelay(10); + + if ((gpio->simple_ival & 0x00000020) != 0x00000020) { + error_status = 2; + printf("%s: failure at rs232_2, rxd status is %d " + "(should be 1)\n", __FUNCTION__, + (gpio->simple_ival & 0x00000020) >> 5); + } + + /* set TXD to 0 */ + gpio->simple_dvo &= ~(1 << 4); + + /* wait some time before requesting status */ + udelay(10); + + if ((gpio->simple_ival & 0x00000020) != 0x00000000) { + error_status = 2; + printf("%s: failure at rs232_2, rxd status is %d " + "(should be 0)\n", __FUNCTION__, + (gpio->simple_ival & 0x00000020) >> 5); + } + + /* check RTS <-> CTS loop */ + /* set RTS to 1 */ + gpio->simple_dvo |= (1 << 6); + + /* wait some time before requesting status */ + udelay(10); + + if ((gpio->simple_ival & 0x00000080) != 0x00000080) { + error_status = 3; + printf("%s: failure at rs232_2, cts status is %d " + "(should be 1)\n", __FUNCTION__, + (gpio->simple_ival & 0x00000080) >> 7); + } + + /* set RTS to 0 */ + gpio->simple_dvo &= ~(1 << 6); + + /* wait some time before requesting status */ + udelay(10); + + if ((gpio->simple_ival & 0x00000080) != 0x00000000) { + error_status = 3; + printf("%s: failure at rs232_2, cts status is %d " + "(should be 0)\n", __FUNCTION__, + (gpio->simple_ival & 0x00000080) >> 7); + } + break; + case 3: + /* set PSC3_0, PSC3_2 as output and PSC3_1, PSC3_3 as input */ + printf("Uart 3 test: Please use RS232 Loopback plug on UART2\n" + "\nPress any key to start\n\n"); + getc(); + + gpio->simple_gpioe &= ~(0x00000F00); + gpio->simple_gpioe |= 0x00000F00; + + gpio->simple_ddr &= ~(0x00000F00); + gpio->simple_ddr |= 0x00000500; + + /* check TXD <-> RXD loop */ + /* set TXD to 1 */ + gpio->simple_dvo |= (1 << 8); + + /* wait some time before requesting status */ + udelay(10); + + if ((gpio->simple_ival & 0x00000200) != 0x00000200) { + error_status = 2; + printf("%s: failure at rs232_3, rxd status is %d " + "(should be 1)\n", __FUNCTION__, + (gpio->simple_ival & 0x00000200) >> 9); + } + + /* set TXD to 0 */ + gpio->simple_dvo &= ~(1 << 8); + + /* wait some time before requesting status */ + udelay(10); + + if ((gpio->simple_ival & 0x00000200) != 0x00000000) { + error_status = 2; + printf("%s: failure at rs232_3, rxd status is %d " + "(should be 0)\n", __FUNCTION__, + (gpio->simple_ival & 0x00000200) >> 9); + } + + /* check RTS <-> CTS loop */ + /* set RTS to 1 */ + gpio->simple_dvo |= (1 << 10); + + /* wait some time before requesting status */ + udelay(10); + + if ((gpio->simple_ival & 0x00000800) != 0x00000800) { + error_status = 3; + printf("%s: failure at rs232_3, cts status is %d " + "(should be 1)\n", __FUNCTION__, + (gpio->simple_ival & 0x00000800) >> 11); + } + + /* set RTS to 0 */ + gpio->simple_dvo &= ~(1 << 10); + + /* wait some time before requesting status */ + udelay(10); + + if ((gpio->simple_ival & 0x00000800) != 0x00000000) { + error_status = 3; + printf("%s: failure at rs232_3, cts status is %d " + "(should be 0)\n", __FUNCTION__, + (gpio->simple_ival & 0x00000800) >> 11); + } + break; + case 4: + /* set PSC6_2, PSC6_3 as output and PSC6_0, PSC6_1 as input */ + printf("Uart 4 test: Please use RS232 Loopback plug on UART2\n" + "\nPress any key to start\n\n"); + getc(); + + gpio->simple_gpioe &= ~(0xF0000000); + gpio->simple_gpioe |= 0x30000000; + + gpio->simple_ddr &= ~(0xf0000000); + gpio->simple_ddr |= 0x30000000; + + (*(vu_long *)MPC5XXX_WU_GPIO_ENABLE) |= 0x30000000; + (*(vu_long *)MPC5XXX_WU_GPIO_DIR) &= ~(0x30000000); + + /* check TXD <-> RXD loop */ + /* set TXD to 1 */ + gpio->simple_dvo |= (1 << 28); + + /* wait some time before requesting status */ + udelay(10); + + if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x10000000) != + 0x10000000) { + error_status = 2; + printf("%s: failure at rs232_4, rxd status is %d " + "(should be 1)\n", __FUNCTION__, + ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & + 0x10000000) >> 28); + } + + /* set TXD to 0 */ + gpio->simple_dvo &= ~(1 << 28); + + /* wait some time before requesting status */ + udelay(10); + + if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x10000000) != + 0x00000000) { + error_status = 2; + printf("%s: failure at rs232_4, rxd status is %d " + "(should be 0)\n", __FUNCTION__, + ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & + 0x10000000) >> 28); + } + + /* check RTS <-> CTS loop */ + /* set RTS to 1 */ + gpio->simple_dvo |= (1 << 29); + + /* wait some time before requesting status */ + udelay(10); + + if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x20000000) != + 0x20000000) { + error_status = 3; + printf("%s: failure at rs232_4, cts status is %d " + "(should be 1)\n", __FUNCTION__, + ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & + 0x20000000) >> 29); + } + + /* set RTS to 0 */ + gpio->simple_dvo &= ~(1 << 29); + + /* wait some time before requesting status */ + udelay(10); + + if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x20000000) != + 0x00000000) { + error_status = 3; + printf("%s: failure at rs232_4, cts status is %d " + "(should be 0)\n", __FUNCTION__, + ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & + 0x20000000) >> 29); + } + break; + default: + printf("%s: invalid rs232 number %s\n", __FUNCTION__, argv[2]); + error_status = 1; + break; + } + gpio->port_config |= (CFG_GPS_PORT_CONFIG & 0xFF0FF80F); + + return error_status; +} + +int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + int rcode = -1; + + switch (argc) { + case 2: + if (strncmp(argv[1], "i2c", 3) == 0) + rcode = do_i2c(argv); + else if (strncmp(argv[1], "led", 3) == 0) + rcode = do_led(argv); + else if (strncmp(argv[1], "usb", 3) == 0) + rcode = do_usbtest(argv); + break; + case 3: + if (strncmp(argv[1], "rs232", 3) == 0) + rcode = do_rs232(argv); + break; + } + + switch (rcode) { + case -1: + printf("Usage:\n" + "fkt { i2c | led | usb }\n" + "fkt rs232 number\n"); + rcode = 1; + break; + case 0: + printf("Test passed\n"); + break; + default: + printf("Test failed with code: %d\n", rcode); + } + + return rcode; +} + +U_BOOT_CMD( + fkt, 4, 1, cmd_fkt, + "fkt - Function test routines\n", + "i2c\n" + " - Test I2C communication\n" + "fkt led\n" + " - Test LEDs\n" + "fkt rs232 number\n" + " - Test RS232 (loopback plug(s) for RS232 required)\n" + "fkt usb\n" + " - Test USB communication\n" +); +#endif /* CFG_CMD_BSP */ diff --git a/board/cm1_qp1/config.mk b/board/cm1_qp1/config.mk new file mode 100644 index 00000000000..7f061391a24 --- /dev/null +++ b/board/cm1_qp1/config.mk @@ -0,0 +1,26 @@ +# +# (C) Copyright 2007 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0xfc000000 + +PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board diff --git a/board/cm1_qp1/fwupdate.c b/board/cm1_qp1/fwupdate.c new file mode 100644 index 00000000000..637375e5989 --- /dev/null +++ b/board/cm1_qp1/fwupdate.c @@ -0,0 +1,187 @@ +/* + * (C) Copyright 2007 Schindler Lift Inc. + * (C) Copyright 2007 Semihalf + * + * Author: Michel Marti + * Adapted for U-Boot 1.2 by Piotr Kruszynski : + * - code clean-up + * - bugfix for overwriting bootargs by user + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#include "fwupdate.h" + +extern int do_bootm(cmd_tbl_t *, int, int, char *[]); +extern long do_fat_read(const char *, void *, unsigned long, int); +extern int do_fat_fsload(cmd_tbl_t *, int, int, char *[]); + +static int load_rescue_image(ulong); + +void cm1_fwupdate(void) +{ + cmd_tbl_t *bcmd; + char *rsargs; + char *tmp = NULL; + char ka[16]; + char *argv[3] = { "bootm", ka, NULL }; + + /* Check if rescue system is disabled... */ + if (getenv("norescue")) { + printf(LOG_PREFIX "Rescue System disabled.\n"); + return; + } + + /* Check if we have a USB storage device and load image */ + if (load_rescue_image(LOAD_ADDR)) + return; + + bcmd = find_cmd("bootm"); + if (!bcmd) + return; + + sprintf(ka, "%lx", LOAD_ADDR); + + /* prepare our bootargs */ + rsargs = getenv("rs-args"); + if (!rsargs) + rsargs = RS_BOOTARGS; + else { + tmp = malloc(strlen(rsargs+1)); + if (!tmp) { + printf(LOG_PREFIX "Memory allocation failed\n"); + return; + } + strcpy(tmp, rsargs); + rsargs = tmp; + } + + setenv("bootargs", rsargs); + + if (rsargs == tmp) + free(rsargs); + + printf(LOG_PREFIX "Starting update system (bootargs=%s)...\n", rsargs); + do_bootm(bcmd, 0, 2, argv); +} + +static int load_rescue_image(ulong addr) +{ + disk_partition_t info; + int devno; + int partno; + int i; + char fwdir[64]; + char nxri[128]; + char *tmp; + char dev[7]; + char addr_str[16]; + char *argv[6] = { "fatload", "usb", dev, addr_str, nxri, NULL }; + block_dev_desc_t *stor_dev = NULL; + cmd_tbl_t *bcmd; + + /* Get name of firmware directory */ + tmp = getenv("fw-dir"); + + /* Copy it into fwdir */ + strncpy(fwdir, tmp ? tmp : FW_DIR, sizeof(fwdir)); + fwdir[sizeof(fwdir) - 1] = 0; /* Terminate string */ + + printf(LOG_PREFIX "Checking for firmware image directory '%s' on USB" + " storage...\n", fwdir); + usb_stop(); + if (usb_init() != 0) + return 1; + + /* Check for storage device */ + if (usb_stor_scan(1) != 0) { + usb_stop(); + return 1; + } + + /* Detect storage device */ + for (devno = 0; devno < USB_MAX_STOR_DEV; devno++) { + stor_dev = usb_stor_get_dev(devno); + if (stor_dev->type != DEV_TYPE_UNKNOWN) + break; + } + if (!stor_dev || stor_dev->type == DEV_TYPE_UNKNOWN) { + printf(LOG_PREFIX "No valid storage device found...\n"); + usb_stop(); + return 1; + } + + /* Detect partition */ + for (partno = -1, i = 0; i < 6; i++) { + if (get_partition_info(stor_dev, i, &info) == 0) { + if (fat_register_device(stor_dev, i) == 0) { + /* Check if rescue image is present */ + FW_DEBUG("Looking for firmware directory '%s'" + " on partition %d\n", fwdir, i); + if (do_fat_read(fwdir, NULL, 0, LS_NO) == -1) { + FW_DEBUG("No NX rescue image on " + "partition %d.\n", i); + } else { + partno = i; + FW_DEBUG("Partition %d contains " + "firmware directory\n", partno); + break; + } + } + } + } + + if (partno == -1) { + printf(LOG_PREFIX "Error: No valid (FAT) partition detected\n"); + usb_stop(); + return 1; + } + + /* Load the rescue image */ + bcmd = find_cmd("fatload"); + if (!bcmd) { + printf(LOG_PREFIX "Error - 'fatload' command not present.\n"); + usb_stop(); + return 1; + } + + tmp = getenv("nx-rescue-image"); + sprintf(nxri, "%s/%s", fwdir, tmp ? tmp : RESCUE_IMAGE); + sprintf(dev, "%d:%d", devno, partno); + sprintf(addr_str, "%lx", addr); + + FW_DEBUG("fat_fsload device='%s', addr='%s', file: %s\n", + dev, addr_str, nxri); + + if (do_fat_fsload(bcmd, 0, 5, argv) != 0) { + usb_stop(); + return 1; + } + + /* Stop USB */ + usb_stop(); + return 0; +} diff --git a/board/cm1_qp1/fwupdate.h b/board/cm1_qp1/fwupdate.h new file mode 100644 index 00000000000..119c2d691c8 --- /dev/null +++ b/board/cm1_qp1/fwupdate.h @@ -0,0 +1,47 @@ +/* + * (C) Copyright 2007 Schindler Lift Inc. + * + * Author: Michel Marti + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __FW_UPDATE_H +#define __FW_UPDATE_H + +/* Default prefix for output messages */ +#define LOG_PREFIX "CM1: " + +/* Extra debug macro */ +#ifdef CONFIG_FWUPDATE_DEBUG +#define FW_DEBUG(fmt...) printf(LOG_PREFIX fmt) +#else +#define FW_DEBUG(fmt...) +#endif + +/* Name of the directory holding firmware images */ +#define FW_DIR "nx-fw" +#define RESCUE_IMAGE "nxrs.img" +#define LOAD_ADDR 0x400000 +#define RS_BOOTARGS "ramdisk=8192K" + +/* Main function for fwupdate */ +void cm1_fwupdate(void); + +#endif /* __FW_UPDATE_H */ diff --git a/board/cm1_qp1/u-boot.lds b/board/cm1_qp1/u-boot.lds new file mode 100644 index 00000000000..8fa9c0f7ed5 --- /dev/null +++ b/board/cm1_qp1/u-boot.lds @@ -0,0 +1,123 @@ +/* + * (C) Copyright 2003-2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/mpc5xxx/start.o (.text) + *(.text) + *(.fixup) + *(.got1) + . = ALIGN(16); + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x0FFF) & 0xFFFFF000; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __fixup_entries = (. - _FIXUP_TABLE_) >> 2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(4096); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(4096); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/cpu/mpc5xxx/fec.c b/cpu/mpc5xxx/fec.c index 813636655b2..3d99d5c1ec6 100644 --- a/cpu/mpc5xxx/fec.c +++ b/cpu/mpc5xxx/fec.c @@ -889,13 +889,20 @@ int mpc5xxx_fec_initialize(bd_t * bis) fec->eth = (ethernet_regs *)MPC5XXX_FEC; fec->tbdBase = (FEC_TBD *)FEC_BD_BASE; fec->rbdBase = (FEC_RBD *)(FEC_BD_BASE + FEC_TBD_NUM * sizeof(FEC_TBD)); -#if defined(CONFIG_CANMB) || defined(CONFIG_HMI1001) || \ - defined(CONFIG_ICECUBE) || defined(CONFIG_INKA4X0) || \ - defined(CONFIG_JUPITER) || defined(CONFIG_MCC200) || \ - defined(CONFIG_MOTIONPRO)|| defined(CONFIG_O2DNT) || \ - defined(CONFIG_PM520) || defined(CONFIG_TOP5200) || \ - defined(CONFIG_TQM5200) || defined(CONFIG_UC101) || \ - defined(CONFIG_V38B) +#if defined(CONFIG_CANMB) || \ + defined(CONFIG_CM1_QP1) || \ + defined(CONFIG_HMI1001) || \ + defined(CONFIG_ICECUBE) || \ + defined(CONFIG_INKA4X0) || \ + defined(CONFIG_JUPITER) || \ + defined(CONFIG_MCC200) || \ + defined(CONFIG_MOTIONPRO) || \ + defined(CONFIG_O2DNT) || \ + defined(CONFIG_PM520) || \ + defined(CONFIG_TOP5200) || \ + defined(CONFIG_TQM5200) || \ + defined(CONFIG_UC101) || \ + defined(CONFIG_V38B) # ifndef CONFIG_FEC_10MBIT fec->xcv_type = MII100; # else diff --git a/include/configs/cm1_qp1.h b/include/configs/cm1_qp1.h new file mode 100644 index 00000000000..effa41c0525 --- /dev/null +++ b/include/configs/cm1_qp1.h @@ -0,0 +1,358 @@ +/* + * (C) Copyright 2003-2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_CM1_QP1 1 /* ... on CM1.QP1 module */ + + +/* + * Supported commands + */ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DATE | \ + CFG_CMD_DHCP | \ + CFG_CMD_ECHO | \ + CFG_CMD_I2C | \ + CFG_CMD_FLASH | \ + CFG_CMD_MII | \ + CFG_CMD_NFS | \ + CFG_CMD_PING | \ + CFG_CMD_DIAG | \ + CFG_CMD_REGINFO | \ + CFG_CMD_SNTP | \ + CFG_CMD_BSP | \ + CFG_CMD_USB | \ + CFG_CMD_FAT | \ + CFG_CMD_JFFS2) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + + +/* + * Serial console configuration + */ +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +#define CONFIG_BAUDRATE 57600 /* ... at 57600 bps */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + + +/* + * Ethernet configuration + */ +#define CONFIG_MPC5xxx_FEC 1 +#define CONFIG_PHY_ADDR 0x00 +#define CONFIG_ENV_OVERWRITE 1 /* allow overwriting of ethaddr */ +/* use misc_init_r() to read ethaddr from I2C EEPROM (see CFG_I2C_EEPROM) */ +#define CONFIG_MISC_INIT_R 1 +#define CONFIG_MAC_OFFSET 0x35 /* MAC address offset in I2C EEPROM */ + + +/* + * POST support + */ +#define CONFIG_POST (CFG_POST_MEMORY | CFG_POST_CPU | CFG_POST_I2C) +#define MPC5XXX_SRAM_POST_SIZE (MPC5XXX_SRAM_SIZE - 4) +/* List of I2C addresses to be verified by POST */ +#define I2C_ADDR_LIST { CFG_I2C_SLAVE, CFG_I2C_IO, CFG_I2C_EEPROM } + + +/* display image timestamps */ +#define CONFIG_TIMESTAMP 1 + + +/* + * Autobooting + */ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run net_nfs_fdt\" to mount root filesystem over NFS;" \ + "echo" +#undef CONFIG_BOOTARGS + +/* + * Default environment settings + */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "hostname=cm1_qp1\0" \ + "netmask=255.255.0.0\0" \ + "ipaddr=192.168.160.33\0" \ + "serverip=192.168.1.1\0" \ + "gatewayip=192.168.1.1\0" \ + "console=ttyPSC0\0" \ + "u-boot_addr=100000\0" \ + "kernel_addr=200000\0" \ + "kernel_addr_flash=fc0c0000\0" \ + "fdt_addr=400000\0" \ + "fdt_addr_flash=fc0a0000\0" \ + "ramdisk_addr=500000\0" \ + "rootpath=/opt/eldk-4.1/ppc_6xx\0" \ + "u-boot=/tftpboot/cm1_qp1/u-boot.bin\0" \ + "bootfile=/tftpboot/cm1_qp1/uImage\0" \ + "fdt_file=/tftpboot/cm1_qp1/cm1_qp1.dtb\0" \ + "load=tftp ${u-boot_addr} ${u-boot}\0" \ + "update=prot off fc000000 fc05ffff; era fc000000 fc05ffff; " \ + "cp.b ${u-boot_addr} fc000000 ${filesize}; " \ + "prot on fc000000 fc05ffff\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "flashargs=setenv bootargs root=/dev/mtdblock5 rw\0" \ + "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "addinit=setenv bootargs ${bootargs} init=/linuxrc\0" \ + "addcons=setenv bootargs ${bootargs} " \ + "console=${console},${baudrate}\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:" \ + "${netmask}:${hostname}:${netdev}:off panic=1\0" \ + "flash_flash=run flashargs addinit addip addcons;" \ + "bootm ${kernel_addr_flash} - ${fdt_addr_flash}\0" \ + "net_nfs_fdt=tftp ${kernel_addr} ${bootfile_fdt}; " \ + "tftp ${fdt_addr} ${fdt_file}; run nfsargs addip " \ + "addcons; bootm ${kernel_addr} - ${fdt_addr}\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_flash" + + +/* + * Low level configuration + */ + + +/* + * Clock configuration + */ +#define CFG_MPC5XXX_CLKIN 33000000 /* SYS_XTAL_IN = 33MHz */ +#define CFG_IPBCLK_EQUALS_XLBCLK 1 /* IPB = 133MHz */ + + +/* + * Memory map + */ +#define CFG_MBAR 0xF0000000 +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_DEFAULT_MBAR 0x80000000 + +#define CFG_LOWBOOT 1 + +/* Use ON-Chip SRAM until RAM will be available */ +#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM +#ifdef CONFIG_POST +/* preserve space for the post_word at end of on-chip SRAM */ +#define CFG_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE +#else +#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE +#endif + +#define CFG_GBL_DATA_SIZE 128 /* size in bytes for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MONITOR_LEN (384 << 10) /* 384 kB for Monitor */ +#define CFG_MALLOC_LEN (256 << 10) /* 256 kB for malloc() */ +#define CFG_BOOTMAPSZ (8 << 20) /* initial mem map for Linux */ + +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT 1 +#endif + + +/* + * Chip selects configuration + */ +/* Boot Chipselect */ +#define CFG_BOOTCS_START CFG_FLASH_BASE +#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE +#define CFG_BOOTCS_CFG 0x00087D31 /* for pci_clk = 33 MHz */ +/* use board_early_init_r to enable flash write in CS_BOOT */ +#define CONFIG_BOARD_EARLY_INIT_R + +/* Flash memory addressing */ +#define CFG_CS0_START CFG_FLASH_BASE +#define CFG_CS0_SIZE CFG_FLASH_SIZE + +/* No burst, dead cycle = 1 for CS0 (Flash) */ +#define CFG_CS_BURST 0x00000000 +#define CFG_CS_DEADCYCLE 0x00000001 + + +/* + * SDRAM configuration + * settings for k4s561632E-xx75, assuming XLB = 132 MHz + */ +#define SDRAM_MODE 0x00CD0000 /* CASL 3, burst length 8 */ +#define SDRAM_CONTROL 0x514F0000 +#define SDRAM_CONFIG1 0xE2333900 +#define SDRAM_CONFIG2 0x8EE70000 + + +/* + * Flash configuration + */ +#define CFG_FLASH_CFI 1 +#define CFG_FLASH_CFI_DRIVER 1 +#define CFG_FLASH_BASE TEXT_BASE +/* we need these despite using CFI */ +#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */ +#define CFG_MAX_FLASH_SECT 256 /* max num of sectors on one chip */ +#define CFG_FLASH_SIZE 0x02000000 /* 32 MiB */ + + +/* + * MTD configuration + */ +#define CONFIG_JFFS2_CMDLINE 1 +#define MTDIDS_DEFAULT "nor0=cm1qp1-0" +#define MTDPARTS_DEFAULT "mtdparts=cm1qp1-0:" \ + "384k(uboot),128k(env)," \ + "128k(redund_env),128k(dtb)," \ + "2m(kernel),27904k(rootfs)," \ + "-(config)" + + +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CFG_I2C_MODULE 2 /* Select I2C module #2 */ +#define CFG_I2C_SPEED 40000 /* 40 kHz */ +#define CFG_I2C_SLAVE 0x0 +#define CFG_I2C_IO 0x38 /* PCA9554AD I2C I/O port address */ +#define CFG_I2C_EEPROM 0x53 /* I2C EEPROM device address */ + + +/* + * RTC configuration + */ +#define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */ + + +/* + * USB configuration + */ +#define CONFIG_USB_OHCI 1 +#define CONFIG_USB_STORAGE 1 +#define CONFIG_USB_CLOCK 0x0001BBBB +#define CONFIG_USB_CONFIG 0x00001000 +/* Partitions (for USB) */ +#define CONFIG_MAC_PARTITION 1 +#define CONFIG_DOS_PARTITION 1 +#define CONFIG_ISO_PARTITION 1 + +/* + * Invoke our last_stage_init function - needed by fwupdate + */ +#define CONFIG_LAST_STAGE_INIT 1 + +/* + * Environment settings + */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SIZE 0x10000 +#define CFG_ENV_SECT_SIZE 0x20000 +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN) +/* Configuration of redundant environment */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + + +/* + * Pin multiplexing configuration + */ + +/* + * CS1/GPIO_WKUP_6: GPIO (default) + * ALTs: CAN1 on I2C1, CAN2 on TIMER0/1 + * IRDA/PSC6: UART + * Ether: Ethernet 100Mbit with MD + * PCI_DIS: PCI controller disabled + * USB: USB + * PSC3: SPI with UART3 + * PSC2: UART + * PSC1: UART + */ +#define CFG_GPS_PORT_CONFIG 0x10559C44 + + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP 1 /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_ALT_MEMTEST 1 +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x03f00000 /* 1 .. 63 MiB in SDRAM */ + +#define CONFIG_LOOPW 1 + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + + +/* + * Various low-level settings + */ +#define CFG_HID0_INIT HID0_ICE | HID0_ICFI +#define CFG_HID0_FINAL HID0_ICE + +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_XLB_PIPELINING 1 /* enable transaction pipeling */ + + +/* + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + + +/* + * Flat Device Tree support + */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define OF_FLAT_TREE_MAX_SIZE 8192 /* max size of the flat tree (8K) */ +#define OF_CPU "PowerPC,5200@0" +#define OF_SOC "soc5200@f0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" + +#endif /* __CONFIG_H */ -- cgit v1.3.1 From 011595307731a7a67a7445d107c279d031e8ab97 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Sat, 14 Jul 2007 01:06:58 +0200 Subject: [PCS440EP] - fix compile error, if BUILD_DIR is used --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Makefile') diff --git a/Makefile b/Makefile index bfa38460dae..3af9962e678 100644 --- a/Makefile +++ b/Makefile @@ -268,7 +268,7 @@ $(obj)u-boot.img: $(obj)u-boot.bin -d $< $@ $(obj)u-boot.sha1: $(obj)u-boot.bin - $(obj)./tools/ubsha1 $(obj)u-boot.bin + $(obj)tools/ubsha1 $(obj)u-boot.bin $(obj)u-boot.dis: $(obj)u-boot $(OBJDUMP) -d $< > $@ -- cgit v1.3.1 From d4024bb72dd81695ec099b2199eda0d27c623e62 Mon Sep 17 00:00:00 2001 From: John Otken Date: Thu, 26 Jul 2007 17:49:11 +0200 Subject: ppc4xx: Add support for AMCC 405EP Taihu board Signed-off-by: John Otken --- MAINTAINERS | 1 + MAKEALL | 8 +- Makefile | 3 + board/amcc/taihu/Makefile | 49 ++ board/amcc/taihu/config.mk | 24 + board/amcc/taihu/flash.c | 1083 +++++++++++++++++++++++++++++++++++++++++++ board/amcc/taihu/lcd.c | 257 ++++++++++ board/amcc/taihu/taihu.c | 234 ++++++++++ board/amcc/taihu/u-boot.lds | 150 ++++++ board/amcc/taihu/update.c | 132 ++++++ common/soft_spi.c | 2 + cpu/ppc4xx/gpio.c | 2 + cpu/ppc4xx/sdram.c | 11 +- cpu/ppc4xx/start.S | 33 ++ dtt/Makefile | 2 +- dtt/ds1775.c | 156 +++++++ include/configs/taihu.h | 473 +++++++++++++++++++ include/dtt.h | 8 + 18 files changed, 2622 insertions(+), 6 deletions(-) create mode 100644 board/amcc/taihu/Makefile create mode 100644 board/amcc/taihu/config.mk create mode 100644 board/amcc/taihu/flash.c create mode 100644 board/amcc/taihu/lcd.c create mode 100644 board/amcc/taihu/taihu.c create mode 100644 board/amcc/taihu/u-boot.lds create mode 100644 board/amcc/taihu/update.c create mode 100644 dtt/ds1775.c create mode 100644 include/configs/taihu.h (limited to 'Makefile') diff --git a/MAINTAINERS b/MAINTAINERS index 693b1157290..6dd43f86195 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -248,6 +248,7 @@ Tolunay Orkun John Otken luan PPC440SP + taihu PPC405EP Keith Outwater diff --git a/MAKEALL b/MAKEALL index 127faa83a32..f69134a63ea 100755 --- a/MAKEALL +++ b/MAKEALL @@ -88,10 +88,10 @@ LIST_4xx=" \ ml300 ocotea OCRTC ORSG \ p3p440 PCI405 pcs440ep PIP405 \ PLU405 PMC405 PPChameleonEVB sbc405 \ - sc3 sequoia sequoia_nand taishan \ - VOH405 VOM405 W7OLMC W7OLMG \ - walnut WUH405 XPEDITE1K yellowstone \ - yosemite yucca \ + sc3 sequoia sequoia_nand taihu \ + taishan VOH405 VOM405 W7OLMC \ + W7OLMG walnut WUH405 XPEDITE1K \ + yellowstone yosemite yucca \ " ######################################################################### diff --git a/Makefile b/Makefile index 3af9962e678..d4fd34e43f9 100644 --- a/Makefile +++ b/Makefile @@ -1254,6 +1254,9 @@ rainier_nand_config: unconfig sc3_config:unconfig @./mkconfig $(@:_config=) ppc ppc4xx sc3 +taihu_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc ppc4xx taihu amcc + taishan_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc diff --git a/board/amcc/taihu/Makefile b/board/amcc/taihu/Makefile new file mode 100644 index 00000000000..9731c6e332a --- /dev/null +++ b/board/amcc/taihu/Makefile @@ -0,0 +1,49 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o flash.o lcd.o update.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/amcc/taihu/config.mk b/board/amcc/taihu/config.mk new file mode 100644 index 00000000000..1bdf5e4fcf3 --- /dev/null +++ b/board/amcc/taihu/config.mk @@ -0,0 +1,24 @@ +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0xFFFC0000 diff --git a/board/amcc/taihu/flash.c b/board/amcc/taihu/flash.c new file mode 100644 index 00000000000..290259e73f9 --- /dev/null +++ b/board/amcc/taihu/flash.c @@ -0,0 +1,1083 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Modified 4/5/2001 + * Wait for completion of each sector erase command issued + * 4/5/2001 + * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com + */ + +#include +#include +#include + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ + +#undef DEBUG +#ifdef DEBUG +#define DEBUGF(x...) printf(x) +#else +#define DEBUGF(x...) +#endif /* DEBUG */ + +#define CFG_FLASH_CHAR_SIZE unsigned char +#define CFG_FLASH_CHAR_ADDR0 (0x0aaa) +#define CFG_FLASH_CHAR_ADDR1 (0x0555) +/*----------------------------------------------------------------------- + * Functions + */ +static ulong flash_get_size(vu_long * addr, flash_info_t * info); +static void flash_get_offsets(ulong base, flash_info_t * info); +static int write_word(flash_info_t * info, ulong dest, ulong data); +#ifdef FLASH_BASE1_PRELIM +static int write_word_1(flash_info_t * info, ulong dest, ulong data); +static int write_word_2(flash_info_t * info, ulong dest, ulong data); +static int flash_erase_1(flash_info_t * info, int s_first, int s_last); +static int flash_erase_2(flash_info_t * info, int s_first, int s_last); +static ulong flash_get_size_1(vu_long * addr, flash_info_t * info); +static ulong flash_get_size_2(vu_long * addr, flash_info_t * info); +#endif + +unsigned long flash_init(void) +{ + unsigned long size_b0, size_b1=0; + int i; + + /* Init: no FLASHes known */ + for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) { + flash_info[i].flash_id = FLASH_UNKNOWN; + } + + /* Static FLASH Bank configuration here - FIXME XXX */ + + size_b0 = + flash_get_size((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]); + + if (flash_info[0].flash_id == FLASH_UNKNOWN) { + printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", + size_b0, size_b0 << 20); + } + + if (size_b0) { + /* Setup offsets */ + flash_get_offsets(FLASH_BASE0_PRELIM, &flash_info[0]); + /* Monitor protection ON by default */ + (void)flash_protect(FLAG_PROTECT_SET, + CFG_MONITOR_BASE, + CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1, + &flash_info[0]); +#ifdef CFG_ENV_IS_IN_FLASH + (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR, + CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1, + &flash_info[0]); + (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND, + CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1, + &flash_info[0]); +#endif + /* Also protect sector containing initial power-up instruction */ + /* (flash_protect() checks address range - other call ignored) */ + (void)flash_protect(FLAG_PROTECT_SET, + 0xFFFFFFFC, 0xFFFFFFFF, &flash_info[0]); + + flash_info[0].size = size_b0; + } +#ifdef FLASH_BASE1_PRELIM + size_b1 = + flash_get_size((vu_long *) FLASH_BASE1_PRELIM, &flash_info[1])*2; + + if (flash_info[1].flash_id == FLASH_UNKNOWN) { + printf("## Unknown FLASH on Bank 1 - Size = 0x%08lx = %ld MB\n", + size_b1, size_b1 << 20); + } + + if (size_b1) { + /* Setup offsets */ + flash_get_offsets(FLASH_BASE1_PRELIM, &flash_info[1]); + flash_info[1].size = size_b1; + } +#endif + return (size_b0 + size_b1); +} + +static void flash_get_offsets(ulong base, flash_info_t * info) +{ + int i; + + /* set up sector start address table */ + if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) || + (info->flash_id == FLASH_AM040)) { + for (i = 0; i < info->sector_count; i++) + info->start[i] = base + (i * 0x00010000); + } else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMLV128U) { + for (i = 0; i < info->sector_count; i++) { + info->start[i] = base + (i * 0x00010000*2); + } + } else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_S29GL128N ) { + for (i = 0; i < info->sector_count; i++) { + info->start[i] = base + (i * 0x00020000*2); + } + } else { + if (info->flash_id & FLASH_BTYPE) { + /* set sector offsets for bottom boot block type */ + info->start[0] = base + 0x00000000; + info->start[1] = base + 0x00004000; + info->start[2] = base + 0x00006000; + info->start[3] = base + 0x00008000; + for (i = 4; i < info->sector_count; i++) { + info->start[i] = + base + (i * 0x00010000) - 0x00030000; + } + } else { + /* set sector offsets for top boot block type */ + i = info->sector_count - 1; + info->start[i--] = base + info->size - 0x00004000; + info->start[i--] = base + info->size - 0x00006000; + info->start[i--] = base + info->size - 0x00008000; + for (; i >= 0; i--) { + info->start[i] = base + i * 0x00010000; + } + } + } +} + + +void flash_print_info(flash_info_t * info) +{ + int i; + int k; + int size; + int erased; + volatile unsigned long *flash; + + if (info->flash_id == FLASH_UNKNOWN) { + printf("missing or unknown FLASH type\n"); + return; + } + + switch (info->flash_id & FLASH_VENDMASK) { + case FLASH_MAN_AMD: + printf("AMD "); + break; + case FLASH_MAN_STM: + printf("STM "); + break; + case FLASH_MAN_FUJ: + printf("FUJITSU "); + break; + case FLASH_MAN_SST: + printf("SST "); + break; + default: + printf("Unknown Vendor "); + break; + } + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_AM040: + printf("AM29F040 (512 Kbit, uniform sector size)\n"); + break; + case FLASH_AM400B: + printf("AM29LV400B (4 Mbit, bottom boot sect)\n"); + break; + case FLASH_AM400T: + printf("AM29LV400T (4 Mbit, top boot sector)\n"); + break; + case FLASH_AM800B: + printf("AM29LV800B (8 Mbit, bottom boot sect)\n"); + break; + case FLASH_AM800T: + printf("AM29LV800T (8 Mbit, top boot sector)\n"); + break; + case FLASH_AMD016: + printf("AM29F016D (16 Mbit, uniform sector size)\n"); + break; + case FLASH_AM160B: + printf("AM29LV160B (16 Mbit, bottom boot sect)\n"); + break; + case FLASH_AM160T: + printf("AM29LV160T (16 Mbit, top boot sector)\n"); + break; + case FLASH_AM320B: + printf("AM29LV320B (32 Mbit, bottom boot sect)\n"); + break; + case FLASH_AM320T: + printf("AM29LV320T (32 Mbit, top boot sector)\n"); + break; + case FLASH_AM033C: + printf("AM29LV033C (32 Mbit, top boot sector)\n"); + break; + case FLASH_AMLV128U: + printf("AM29LV128U (128 Mbit * 2, top boot sector)\n"); + break; + case FLASH_SST800A: + printf("SST39LF/VF800 (8 Mbit, uniform sector size)\n"); + break; + case FLASH_SST160A: + printf("SST39LF/VF160 (16 Mbit, uniform sector size)\n"); + break; + case FLASH_STMW320DT: + printf ("M29W320DT (32 M, top sector)\n"); + break; + case FLASH_S29GL128N: + printf ("S29GL128N (256 Mbit, uniform sector size)\n"); + break; + default: + printf("Unknown Chip Type\n"); + break; + } + + printf(" Size: %ld KB in %d Sectors\n", + info->size >> 10, info->sector_count); + + printf(" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; ++i) { + /* + * Check if whole sector is erased + */ + if (i != (info->sector_count - 1)) + size = info->start[i + 1] - info->start[i]; + else + size = info->start[0] + info->size - info->start[i]; + erased = 1; + flash = (volatile unsigned long *)info->start[i]; + size = size >> 2; /* divide by 4 for longword access */ + for (k = 0; k < size; k++) { + if (*flash++ != 0xffffffff) { + erased = 0; + break; + } + } + + if ((i % 5) == 0) + printf("\n "); + printf(" %08lX%s%s", + info->start[i], + erased ? " E" : " ", info->protect[i] ? "RO " : " "); + } + printf("\n"); + return; +} + + +/* + * The following code cannot be run from FLASH! + */ +#ifdef FLASH_BASE1_PRELIM +static ulong flash_get_size(vu_long * addr, flash_info_t * info) +{ + if ((ulong)addr == FLASH_BASE1_PRELIM) { + return flash_get_size_2(addr, info); + } else { + return flash_get_size_1(addr, info); + } +} + +static ulong flash_get_size_1(vu_long * addr, flash_info_t * info) +#else +static ulong flash_get_size(vu_long * addr, flash_info_t * info) +#endif +{ + short i; + CFG_FLASH_WORD_SIZE value; + ulong base = (ulong) addr; + volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr; + + DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr); + + /* Write auto select command: read Manufacturer ID */ + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090; + udelay(1000); + + value = addr2[0]; + DEBUGF("FLASH MANUFACT: %x\n", value); + + switch (value) { + case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT: + info->flash_id = FLASH_MAN_AMD; + break; + case (CFG_FLASH_WORD_SIZE) FUJ_MANUFACT: + info->flash_id = FLASH_MAN_FUJ; + break; + case (CFG_FLASH_WORD_SIZE) SST_MANUFACT: + info->flash_id = FLASH_MAN_SST; + break; + case (CFG_FLASH_WORD_SIZE) STM_MANUFACT: + info->flash_id = FLASH_MAN_STM; + break; + default: + info->flash_id = FLASH_UNKNOWN; + info->sector_count = 0; + info->size = 0; + return 0; /* no or unknown flash */ + } + + value = addr2[1]; /* device ID */ + DEBUGF("\nFLASH DEVICEID: %x\n", value); + + switch (value) { + case (CFG_FLASH_WORD_SIZE) AMD_ID_LV040B: + info->flash_id += FLASH_AM040; + info->sector_count = 8; + info->size = 0x0080000; /* => 512 ko */ + break; + + case (CFG_FLASH_WORD_SIZE) AMD_ID_F040B: + info->flash_id += FLASH_AM040; + info->sector_count = 8; + info->size = 0x0080000; /* => 512 ko */ + break; + + case (CFG_FLASH_WORD_SIZE) STM_ID_M29W040B: + info->flash_id += FLASH_AM040; + info->sector_count = 8; + info->size = 0x0080000; /* => 512 ko */ + break; + + case (CFG_FLASH_WORD_SIZE) AMD_ID_F016D: + info->flash_id += FLASH_AMD016; + info->sector_count = 32; + info->size = 0x00200000; + break; /* => 2 MB */ + + case (CFG_FLASH_WORD_SIZE) AMD_ID_LV033C: + info->flash_id += FLASH_AMDLV033C; + info->sector_count = 64; + info->size = 0x00400000; + break; /* => 4 MB */ + + case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400T: + info->flash_id += FLASH_AM400T; + info->sector_count = 11; + info->size = 0x00080000; + break; /* => 0.5 MB */ + + case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400B: + info->flash_id += FLASH_AM400B; + info->sector_count = 11; + info->size = 0x00080000; + break; /* => 0.5 MB */ + + case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800T: + info->flash_id += FLASH_AM800T; + info->sector_count = 19; + info->size = 0x00100000; + break; /* => 1 MB */ + + case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800B: + info->flash_id += FLASH_AM800B; + info->sector_count = 19; + info->size = 0x00100000; + break; /* => 1 MB */ + + case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160T: + info->flash_id += FLASH_AM160T; + info->sector_count = 35; + info->size = 0x00200000; + break; /* => 2 MB */ + + case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160B: + info->flash_id += FLASH_AM160B; + info->sector_count = 35; + info->size = 0x00200000; + break; /* => 2 MB */ + default: + info->flash_id = FLASH_UNKNOWN; + return 0; /* => no or unknown flash */ + } + + /* set up sector start address table */ + if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMD016)) { + for (i = 0; i < info->sector_count; i++) + info->start[i] = base + (i * 0x00010000); + } + else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMLV128U) { + for (i = 0; i < info->sector_count; i++) + info->start[i] = base + (i * 0x00010000 * 2); + } else { + if (info->flash_id & FLASH_BTYPE) { + /* set sector offsets for bottom boot block type */ + info->start[0] = base + 0x00000000; + info->start[1] = base + 0x00004000; + info->start[2] = base + 0x00006000; + info->start[3] = base + 0x00008000; + for (i = 4; i < info->sector_count; i++) { + info->start[i] = + base + (i * 0x00010000) - 0x00030000; + } + } else { + /* set sector offsets for top boot block type */ + i = info->sector_count - 1; + info->start[i--] = base + info->size - 0x00004000; + info->start[i--] = base + info->size - 0x00006000; + info->start[i--] = base + info->size - 0x00008000; + for (; i >= 0; i--) { + info->start[i] = base + i * 0x00010000; + } + } + } + + /* check for protected sectors */ + for (i = 0; i < info->sector_count; i++) { + /* read sector protection at sector address, (A7 .. A0) = 0x02 */ + /* D0 = 1 if protected */ + addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]); + + /* For AMD29033C flash we need to resend the command of * + * reading flash protection for upper 8 Mb of flash */ + if (i == 32) { + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA; + addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555; + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090; + } + + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) + info->protect[i] = 0; + else + info->protect[i] = addr2[2] & 1; + } + + /* issue bank reset to return to read mode */ + addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; + + return info->size; +} + +static int wait_for_DQ7_1(flash_info_t * info, int sect) +{ + ulong start, now, last; + volatile CFG_FLASH_WORD_SIZE *addr = + (CFG_FLASH_WORD_SIZE *) (info->start[sect]); + + start = get_timer(0); + last = start; + while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) != + (CFG_FLASH_WORD_SIZE) 0x00800080) { + if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { + printf("Timeout\n"); + return -1; + } + /* show that we're waiting */ + if ((now - last) > 1000) { /* every second */ + putc('.'); + last = now; + } + } + return 0; +} + +#ifdef FLASH_BASE1_PRELIM +int flash_erase(flash_info_t * info, int s_first, int s_last) +{ + if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMLV128U) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_S29GL128N) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT)) { + return flash_erase_2(info, s_first, s_last); + } else { + return flash_erase_1(info, s_first, s_last); + } +} + +static int flash_erase_1(flash_info_t * info, int s_first, int s_last) +#else +int flash_erase(flash_info_t * info, int s_first, int s_last) +#endif +{ + volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]); + volatile CFG_FLASH_WORD_SIZE *addr2; + int flag, prot, sect, l_sect; + int i; + + if ((s_first < 0) || (s_first > s_last)) { + if (info->flash_id == FLASH_UNKNOWN) { + printf("- missing\n"); + } else { + printf("- no sectors to erase\n"); + } + return 1; + } + + if (info->flash_id == FLASH_UNKNOWN) { + printf("Can't erase unknown flash type - aborted\n"); + return 1; + } + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + + if (prot) { + printf("- Warning: %d protected sectors will not be erased!\n", + prot); + } else { + printf("\n"); + } + + l_sect = -1; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect <= s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]); + + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) { + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080; + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00500050; /* block erase */ + for (i = 0; i < 50; i++) + udelay(1000); /* wait 1 ms */ + } else { + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080; + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030; /* sector erase */ + } + l_sect = sect; + /* + * Wait for each sector to complete, it's more + * reliable. According to AMD Spec, you must + * issue all erase commands within a specified + * timeout. This has been seen to fail, especially + * if printf()s are included (for debug)!! + */ + wait_for_DQ7_1(info, sect); + } + } + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + /* wait at least 80us - let's wait 1 ms */ + udelay(1000); + + /* reset to read mode */ + addr = (CFG_FLASH_WORD_SIZE *) info->start[0]; + addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */ + + printf(" done\n"); + return 0; +} + +/*----------------------------------------------------------------------- + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) +{ + ulong cp, wp, data; + int i, l, rc; + + wp = (addr & ~3); /* get lower word aligned address */ + + /* + * handle unaligned start bytes + */ + if ((l = addr - wp) != 0) { + data = 0; + for (i = 0, cp = wp; i < l; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + for (; i < 4 && cnt > 0; ++i) { + data = (data << 8) | *src++; + --cnt; + ++cp; + } + for (; cnt == 0 && i < 4; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + + if ((rc = write_word(info, wp, data)) != 0) { + return rc; + } + wp += 4; + } + + /* + * handle word aligned part + */ + while (cnt >= 4) { + data = 0; + for (i = 0; i < 4; ++i) { + data = (data << 8) | *src++; + } + if ((rc = write_word(info, wp, data)) != 0) { + return rc; + } + wp += 4; + cnt -= 4; + } + + if (cnt == 0) { + return 0; + } + + /* + * handle unaligned tail bytes + */ + data = 0; + for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) { + data = (data << 8) | *src++; + --cnt; + } + for (; i < 4; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + + return (write_word(info, wp, data)); +} + +/*----------------------------------------------------------------------- + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +#ifdef FLASH_BASE1_PRELIM +static int write_word(flash_info_t * info, ulong dest, ulong data) +{ + if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMLV128U) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_S29GL128N) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT)) { + return write_word_2(info, dest, data); + } else { + return write_word_1(info, dest, data); + } +} + +static int write_word_1(flash_info_t * info, ulong dest, ulong data) +#else +static int write_word(flash_info_t * info, ulong dest, ulong data) +#endif +{ + volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]); + volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest; + volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data; + ulong start; + int i; + + /* Check if Flash is (sufficiently) erased */ + if ((*((vu_long *)dest) & data) != data) { + return 2; + } + + for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) { + int flag; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0; + + dest2[i] = data2[i]; + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + /* data polling for D7 */ + start = get_timer(0); + while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080) != + (data2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080)) { + + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + return 1; + } + } + } + + return 0; +} + +#ifdef FLASH_BASE1_PRELIM + +/* + * The following code cannot be run from FLASH! + */ +static ulong flash_get_size_2(vu_long * addr, flash_info_t * info) +{ + short i; + CFG_FLASH_CHAR_SIZE value; + ulong base = (ulong) addr; + volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr; + + DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr); + + /* Write auto select command: read Manufacturer ID */ + addr2[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA; + addr2[CFG_FLASH_CHAR_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555; + addr2[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090; + udelay(1000); + + value = (CFG_FLASH_CHAR_SIZE)addr2[0]; + DEBUGF("FLASH MANUFACT: %x\n", value); + + switch (value) { + case (CFG_FLASH_CHAR_SIZE) AMD_MANUFACT: + info->flash_id = FLASH_MAN_AMD; + break; + case (CFG_FLASH_CHAR_SIZE) FUJ_MANUFACT: + info->flash_id = FLASH_MAN_FUJ; + break; + case (CFG_FLASH_CHAR_SIZE) SST_MANUFACT: + info->flash_id = FLASH_MAN_SST; + break; + case (CFG_FLASH_CHAR_SIZE) STM_MANUFACT: + info->flash_id = FLASH_MAN_STM; + break; + default: + info->flash_id = FLASH_UNKNOWN; + info->sector_count = 0; + info->size = 0; + return 0; /* no or unknown flash */ + } + + value = (CFG_FLASH_CHAR_SIZE)addr2[2]; /* device ID */ + DEBUGF("\nFLASH DEVICEID: %x\n", value); + + switch (value) { + case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV040B: + info->flash_id += FLASH_AM040; + info->sector_count = 8; + info->size = 0x0080000; /* => 512 ko */ + break; + + case (CFG_FLASH_CHAR_SIZE) AMD_ID_F040B: + info->flash_id += FLASH_AM040; + info->sector_count = 8; + info->size = 0x0080000; /* => 512 ko */ + break; + + case (CFG_FLASH_CHAR_SIZE) STM_ID_M29W040B: + info->flash_id += FLASH_AM040; + info->sector_count = 8; + info->size = 0x0080000; /* => 512 ko */ + break; + + case (CFG_FLASH_CHAR_SIZE) AMD_ID_F016D: + info->flash_id += FLASH_AMD016; + info->sector_count = 32; + info->size = 0x00200000; + break; /* => 2 MB */ + + case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV033C: + info->flash_id += FLASH_AMDLV033C; + info->sector_count = 64; + info->size = 0x00400000; + break; /* => 4 MB */ + + case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV400T: + info->flash_id += FLASH_AM400T; + info->sector_count = 11; + info->size = 0x00080000; + break; /* => 0.5 MB */ + + case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV400B: + info->flash_id += FLASH_AM400B; + info->sector_count = 11; + info->size = 0x00080000; + break; /* => 0.5 MB */ + + case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV800T: + info->flash_id += FLASH_AM800T; + info->sector_count = 19; + info->size = 0x00100000; + break; /* => 1 MB */ + + case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV800B: + info->flash_id += FLASH_AM800B; + info->sector_count = 19; + info->size = 0x00100000; + break; /* => 1 MB */ + + case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV160T: + info->flash_id += FLASH_AM160T; + info->sector_count = 35; + info->size = 0x00200000; + break; /* => 2 MB */ + + case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV160B: + info->flash_id += FLASH_AM160B; + info->sector_count = 35; + info->size = 0x00200000; + break; /* => 2 MB */ + case (CFG_FLASH_CHAR_SIZE) AMD_ID_MIRROR: + if ((CFG_FLASH_CHAR_SIZE)addr2[0x1c] == (CFG_FLASH_CHAR_SIZE)AMD_ID_LV128U_2 + && (CFG_FLASH_CHAR_SIZE)addr2[0x1e] == (CFG_FLASH_CHAR_SIZE)AMD_ID_LV128U_3) { + info->flash_id += FLASH_AMLV128U; + info->sector_count = 256; + info->size = 0x01000000; + } else if ((CFG_FLASH_CHAR_SIZE)addr2[0x1c] == (CFG_FLASH_CHAR_SIZE)AMD_ID_GL128N_2 + && (CFG_FLASH_CHAR_SIZE)addr2[0x1e] == (CFG_FLASH_CHAR_SIZE)AMD_ID_GL128N_3 ) { + info->flash_id += FLASH_S29GL128N; + info->sector_count = 128; + info->size = 0x01000000; + } + else + info->flash_id = FLASH_UNKNOWN; + break; /* => 2 MB */ + + default: + info->flash_id = FLASH_UNKNOWN; + return 0; /* => no or unknown flash */ + } + + /* set up sector start address table */ + if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMD016)) { + for (i = 0; i < info->sector_count; i++) + info->start[i] = base + (i * 0x00010000); + } else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMLV128U) { + for (i = 0; i < info->sector_count; i++) + info->start[i] = base + (i * 0x00010000); + } else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_S29GL128N ) { + for (i = 0; i < info->sector_count; i++) + info->start[i] = base + (i * 0x00020000); + } else { + if (info->flash_id & FLASH_BTYPE) { + /* set sector offsets for bottom boot block type */ + info->start[0] = base + 0x00000000; + info->start[1] = base + 0x00004000; + info->start[2] = base + 0x00006000; + info->start[3] = base + 0x00008000; + for (i = 4; i < info->sector_count; i++) { + info->start[i] = + base + (i * 0x00010000) - 0x00030000; + } + } else { + /* set sector offsets for top boot block type */ + i = info->sector_count - 1; + info->start[i--] = base + info->size - 0x00004000; + info->start[i--] = base + info->size - 0x00006000; + info->start[i--] = base + info->size - 0x00008000; + for (; i >= 0; i--) { + info->start[i] = base + i * 0x00010000; + } + } + } + + /* check for protected sectors */ + for (i = 0; i < info->sector_count; i++) { + /* read sector protection at sector address, (A7 .. A0) = 0x02 */ + /* D0 = 1 if protected */ + addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]); + + /* For AMD29033C flash we need to resend the command of * + * reading flash protection for upper 8 Mb of flash */ + if (i == 32) { + addr2[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA; + addr2[CFG_FLASH_CHAR_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555; + addr2[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090; + } + + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) + info->protect[i] = 0; + else + info->protect[i] = (CFG_FLASH_CHAR_SIZE)addr2[4] & 1; + } + + /* issue bank reset to return to read mode */ + addr2[0] = (CFG_FLASH_WORD_SIZE) 0xF0F0F0F0; + return info->size; +} + +static int wait_for_DQ7_2(flash_info_t * info, int sect) +{ + ulong start, now, last; + volatile CFG_FLASH_WORD_SIZE *addr = + (CFG_FLASH_WORD_SIZE *) (info->start[sect]); + + start = get_timer(0); + last = start; + while (((CFG_FLASH_WORD_SIZE)addr[0] & (CFG_FLASH_WORD_SIZE) 0x80808080) != + (CFG_FLASH_WORD_SIZE) 0x80808080) { + if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { + printf("Timeout\n"); + return -1; + } + /* show that we're waiting */ + if ((now - last) > 1000) { /* every second */ + putc('.'); + last = now; + } + } + return 0; +} + +static int flash_erase_2(flash_info_t * info, int s_first, int s_last) +{ + volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]); + volatile CFG_FLASH_WORD_SIZE *addr2; + int flag, prot, sect, l_sect; + int i; + + if ((s_first < 0) || (s_first > s_last)) { + if (info->flash_id == FLASH_UNKNOWN) { + printf("- missing\n"); + } else { + printf("- no sectors to erase\n"); + } + return 1; + } + + if (info->flash_id == FLASH_UNKNOWN) { + printf("Can't erase unknown flash type - aborted\n"); + return 1; + } + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + + if (prot) { + printf("- Warning: %d protected sectors will not be erased!\n", + prot); + } else { + printf("\n"); + } + + l_sect = -1; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect <= s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]); + + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) { + addr[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA; + addr[CFG_FLASH_CHAR_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555; + addr[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x80808080; + addr[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA; + addr[CFG_FLASH_CHAR_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555; + addr2[0] = (CFG_FLASH_WORD_SIZE) 0x50505050; /* block erase */ + for (i = 0; i < 50; i++) + udelay(1000); /* wait 1 ms */ + } else { + addr[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA; + addr[CFG_FLASH_CHAR_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555; + addr[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x80808080; + addr[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA; + addr[CFG_FLASH_CHAR_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555; + addr2[0] = (CFG_FLASH_WORD_SIZE) 0x30303030; /* sector erase */ + } + l_sect = sect; + /* + * Wait for each sector to complete, it's more + * reliable. According to AMD Spec, you must + * issue all erase commands within a specified + * timeout. This has been seen to fail, especially + * if printf()s are included (for debug)!! + */ + wait_for_DQ7_2(info, sect); + } + } + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + /* wait at least 80us - let's wait 1 ms */ + udelay(1000); + + /* reset to read mode */ + addr = (CFG_FLASH_WORD_SIZE *) info->start[0]; + addr[0] = (CFG_FLASH_WORD_SIZE) 0xF0F0F0F0; /* reset bank */ + + printf(" done\n"); + return 0; +} + +static int write_word_2(flash_info_t * info, ulong dest, ulong data) +{ + volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]); + volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest; + volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data; + ulong start; + int i; + + /* Check if Flash is (sufficiently) erased */ + if ((*((vu_long *)dest) & data) != data) { + return 2; + } + + for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) { + int flag; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + addr2[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA; + addr2[CFG_FLASH_CHAR_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555; + addr2[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xA0A0A0A0; + + dest2[i] = data2[i]; + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + /* data polling for D7 */ + start = get_timer(0); + while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x80808080) != + (data2[i] & (CFG_FLASH_WORD_SIZE) 0x80808080)) { + + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + return 1; + } + } + } + + return 0; +} + +#endif /* FLASH_BASE1_PRELIM */ diff --git a/board/amcc/taihu/lcd.c b/board/amcc/taihu/lcd.c new file mode 100644 index 00000000000..3d042dfa736 --- /dev/null +++ b/board/amcc/taihu/lcd.c @@ -0,0 +1,257 @@ +/* + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +#define LCD_CMD_ADDR 0x50100002 +#define LCD_DATA_ADDR 0x50100003 +#define LCD_BLK_CTRL CPLD_REG1_ADDR + +static char *amcc_logo = "AMCC 405EP TAIHU EVALUATION KIT"; +static int addr_flag = 0x80; + +static void lcd_bl_ctrl(char val) +{ + out_8((u8 *) LCD_BLK_CTRL, in_8((u8 *) LCD_BLK_CTRL) | val); +} + +static void lcd_putc(int val) +{ + int i = 100; + char addr; + + while (i--) { + if ((in_8((u8 *) LCD_CMD_ADDR) & 0x80) != 0x80) { /*BF = 1 ?*/ + udelay(50); + break; + } + udelay(50); + } + + if (in_8((u8 *) LCD_CMD_ADDR) & 0x80) { + printf("LCD is busy\n"); + return; + } + + addr = in_8((u8 *) LCD_CMD_ADDR); + udelay(50); + if ((addr != 0) && (addr % 0x10 == 0)) { + addr_flag ^= 0x40; + out_8((u8 *) LCD_CMD_ADDR, addr_flag); + } + + udelay(50); + out_8((u8 *) LCD_DATA_ADDR, val); + udelay(50); +} + +static void lcd_puts(char *s) +{ + char *p = s; + int i = 100; + + while (i--) { + if ((in_8((u8 *) LCD_CMD_ADDR) & 0x80) != 0x80) { /*BF = 1 ?*/ + udelay(50); + break; + } + udelay(50); + } + + if (in_8((u8 *) LCD_CMD_ADDR) & 0x80) { + printf("LCD is busy\n"); + return; + } + + while (*p) + lcd_putc(*p++); +} + +static void lcd_put_logo(void) +{ + int i = 100; + char *p = amcc_logo; + + while (i--) { + if ((in_8((u8 *) LCD_CMD_ADDR) & 0x80) != 0x80) { /*BF = 1 ?*/ + udelay(50); + break; + } + udelay(50); + } + + if (in_8((u8 *) LCD_CMD_ADDR) & 0x80) { + printf("LCD is busy\n"); + return; + } + + out_8((u8 *) LCD_CMD_ADDR, 0x80); + while (*p) + lcd_putc(*p++); +} + +int lcd_init(void) +{ + puts("LCD: "); + out_8((u8 *) LCD_CMD_ADDR, 0x38); /* set function:8-bit,2-line,5x7 font type */ + udelay(50); + out_8((u8 *) LCD_CMD_ADDR, 0x0f); /* set display on,cursor on,blink on */ + udelay(50); + out_8((u8 *) LCD_CMD_ADDR, 0x01); /* display clear */ + udelay(2000); + out_8((u8 *) LCD_CMD_ADDR, 0x06); /* set entry */ + udelay(50); + lcd_bl_ctrl(0x02); /* set backlight on */ + lcd_put_logo(); + puts("ready\n"); + + return 0; +} + +static int do_lcd_clear (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + out_8((u8 *) LCD_CMD_ADDR, 0x01); + udelay(2000); + + return 0; +} + +static int do_lcd_puts (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + if (argc < 2) { + printf("%s", cmdtp->usage); + return 1; + } + lcd_puts(argv[1]); + + return 0; +} + +static int do_lcd_putc (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + if (argc < 2) { + printf("%s", cmdtp->usage); + return 1; + } + lcd_putc((char)argv[1][0]); + + return 0; +} + +static int do_lcd_cur (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + ulong count; + ulong dir; + char cur_addr; + + if (argc < 3) { + printf("%s", cmdtp->usage); + return 1; + } + + count = simple_strtoul(argv[1], NULL, 16); + if (count > 31) { + printf("unable to shift > 0x20\n"); + count = 0; + } + + dir = simple_strtoul(argv[2], NULL, 16); + cur_addr = in_8((u8 *) LCD_CMD_ADDR); + udelay(50); + + if (dir == 0x0) { + if (addr_flag == 0x80) { + if (count >= (cur_addr & 0xf)) { + out_8((u8 *) LCD_CMD_ADDR, 0x80); + udelay(50); + count = 0; + } + } else { + if (count >= ((cur_addr & 0x0f) + 0x0f)) { + out_8((u8 *) LCD_CMD_ADDR, 0x80); + addr_flag = 0x80; + udelay(50); + count = 0x0; + } else if (count >= ( cur_addr & 0xf)) { + count -= cur_addr & 0xf ; + out_8((u8 *) LCD_CMD_ADDR, 0x80 | 0xf); + addr_flag = 0x80; + udelay(50); + } + } + } else { + if (addr_flag == 0x80) { + if (count >= (0x1f - (cur_addr & 0xf))) { + count = 0x0; + addr_flag = 0xc0; + out_8((u8 *) LCD_CMD_ADDR, 0xc0 | 0xf); + udelay(50); + } else if ((count + (cur_addr & 0xf ))>= 0x0f) { + count = count + (cur_addr & 0xf) - 0x0f; + addr_flag = 0xc0; + out_8((u8 *) LCD_CMD_ADDR, 0xc0); + udelay(50); + } + } else if ((count + (cur_addr & 0xf )) >= 0x0f) { + count = 0x0; + out_8((u8 *) LCD_CMD_ADDR, 0xC0 | 0x0F); + udelay(50); + } + } + while (count--) { + if (dir == 0) + out_8((u8 *) LCD_CMD_ADDR, 0x10); + else + out_8((u8 *) LCD_CMD_ADDR, 0x14); + udelay(50); + } + + return 0; +} + +U_BOOT_CMD( + lcd_cls, 1, 1, do_lcd_clear, + "lcd_cls - lcd clear display\n", + NULL + ); + +U_BOOT_CMD( + lcd_puts, 2, 1, do_lcd_puts, + "lcd_puts - display string on lcd\n", + " - to be displayed\n" + ); + +U_BOOT_CMD( + lcd_putc, 2, 1, do_lcd_putc, + "lcd_putc - display char on lcd\n", + " - to be displayed\n" + ); + +U_BOOT_CMD( + lcd_cur, 3, 1, do_lcd_cur, + "lcd_cur - shift cursor on lcd\n", + " - shift cursor on lcd times, direction is \n" + " - 0..31\n" + " - 0=backward 1=forward\n" + ); diff --git a/board/amcc/taihu/taihu.c b/board/amcc/taihu/taihu.c new file mode 100644 index 00000000000..ee9d3b5446f --- /dev/null +++ b/board/amcc/taihu/taihu.c @@ -0,0 +1,234 @@ +/* + * (C) Copyright 2000-2005 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2005-2007 + * Beijing UD Technology Co., Ltd., taihusupport@amcc.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include +#include +#include +#include +#include +#include + +extern int lcd_init(void); + +/* + * board_early_init_f + */ +int board_early_init_f(void) +{ + lcd_init(); + + mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(uicer, 0x00000000); /* disable all ints */ + mtdcr(uiccr, 0x00000000); + mtdcr(uicpr, 0xFFFF7F00); /* set int polarities */ + mtdcr(uictr, 0x00000000); /* set int trigger levels */ + mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */ + + mtebc(pb3ap, CFG_EBC_PB3AP); /* memory bank 3 (CPLD_LCM) initialization */ + mtebc(pb3cr, CFG_EBC_PB3CR); + + return 0; +} + +/* + * Check Board Identity: + */ +int checkboard(void) +{ + char *s = getenv("serial#"); + + puts("Board: Taihu - AMCC PPC405EP Evaluation Board"); + + if (s != NULL) { + puts(", serial# "); + puts(s); + } + putc('\n'); + + return 0; +} + +/************************************************************************* + * long int initdram + * + ************************************************************************/ +long int initdram(int board) +{ + return CFG_SDRAM_SIZE_PER_BANK * CFG_SDRAM_BANKS; /* 128Mbytes */ +} + +static int do_sw_stat(cmd_tbl_t* cmd_tp, int flags, int argc, char *argv[]) +{ + char stat; + int i; + + stat = in_8((u8 *) CPLD_REG0_ADDR); + printf("SW2 status: "); + for (i=0; i<4; i++) /* 4-position */ + printf("%d:%s ", i, stat & (0x08 >> i)?"on":"off"); + printf("\n"); + return 0; +} + +U_BOOT_CMD ( + sw2_stat, 1, 1, do_sw_stat, + "sw2_stat - show status of switch 2\n", + NULL + ); + +static int do_led_ctl(cmd_tbl_t* cmd_tp, int flags, int argc, char *argv[]) +{ + int led_no; + + if (argc != 3) { + printf("%s", cmd_tp->usage); + return -1; + } + + led_no = simple_strtoul(argv[1], NULL, 16); + if (led_no != 1 && led_no != 2) { + printf("%s", cmd_tp->usage); + return -1; + } + + if (strcmp(argv[2],"off") == 0x0) { + if (led_no == 1) + gpio_write_bit(30, 1); + else + gpio_write_bit(31, 1); + } else if (strcmp(argv[2],"on") == 0x0) { + if (led_no == 1) + gpio_write_bit(30, 0); + else + gpio_write_bit(31, 0); + } else { + printf("%s", cmd_tp->usage); + return -1; + } + + return 0; +} + +U_BOOT_CMD ( + led_ctl, 3, 1, do_led_ctl, + "led_ctl - make led 1 or 2 on or off\n", + " - make led on/off,\n" + "\tled_no is 1 or 2\t" + ); + +#define SPI_CS_GPIO0 0 +#define SPI_SCLK_GPIO14 14 +#define SPI_DIN_GPIO15 15 +#define SPI_DOUT_GPIO16 16 + +void spi_scl(int bit) +{ + gpio_write_bit(SPI_SCLK_GPIO14, bit); +} + +void spi_sda(int bit) +{ + gpio_write_bit(SPI_DOUT_GPIO16, bit); +} + +unsigned char spi_read(void) +{ + return (unsigned char)gpio_read_out_bit(SPI_DIN_GPIO15); +} + +void taihu_spi_chipsel(int cs) +{ + gpio_write_bit(SPI_CS_GPIO0, cs); +} + +spi_chipsel_type spi_chipsel[]= { + taihu_spi_chipsel +}; + +int spi_chipsel_cnt = sizeof(spi_chipsel) / sizeof(spi_chipsel[0]); + +#ifdef CONFIG_PCI +static unsigned char int_lines[32] = { + 29, 30, 27, 28, 29, 30, 25, 27, + 29, 30, 27, 28, 29, 30, 27, 28, + 29, 30, 27, 28, 29, 30, 27, 28, + 29, 30, 27, 28, 29, 30, 27, 28}; + +static void taihu_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev) +{ + unsigned char int_line = int_lines[PCI_DEV(dev) & 31]; + + pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, int_line); +} + +int pci_pre_init(struct pci_controller *hose) +{ + hose->fixup_irq = taihu_pci_fixup_irq; + return 1; +} +#endif /* CONFIG_PCI */ + +#ifdef CFG_DRAM_TEST +int testdram(void) +{ + unsigned long *mem = (unsigned long *)0; + const unsigned long kend = (1024 / sizeof(unsigned long)); + unsigned long k, n; + unsigned long msr; + unsigned long total_kbytes = CFG_SDRAM_SIZE_PER_BANK * CFG_SDRAM_BANKS / 1024; + + msr = mfmsr(); + mtmsr(msr & ~(MSR_EE)); + + for (k = 0; k < total_kbytes ; + ++k, mem += (1024 / sizeof(unsigned long))) { + if ((k & 1023) == 0) + printf("%3d MB\r", k / 1024); + + memset(mem, 0xaaaaaaaa, 1024); + for (n = 0; n < kend; ++n) { + if (mem[n] != 0xaaaaaaaa) { + printf("SDRAM test fails at: %08x\n", + (uint) & mem[n]); + return 1; + } + } + + memset(mem, 0x55555555, 1024); + for (n = 0; n < kend; ++n) { + if (mem[n] != 0x55555555) { + printf("SDRAM test fails at: %08x\n", + (uint) & mem[n]); + return 1; + } + } + } + printf("SDRAM test passes\n"); + mtmsr(msr); + + return 0; +} +#endif /* CFG_DRAM_TEST */ diff --git a/board/amcc/taihu/u-boot.lds b/board/amcc/taihu/u-boot.lds new file mode 100644 index 00000000000..be030923b8e --- /dev/null +++ b/board/amcc/taihu/u-boot.lds @@ -0,0 +1,150 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + .resetvec 0xFFFFFFFC : + { + *(.resetvec) + } = 0xffff + + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/ppc4xx/start.o (.text) + cpu/ppc4xx/kgdb.o (.text) + cpu/ppc4xx/traps.o (.text) + cpu/ppc4xx/interrupts.o (.text) + cpu/ppc4xx/serial.o (.text) + cpu/ppc4xx/cpu_init.o (.text) + cpu/ppc4xx/speed.o (.text) + common/dlmalloc.o (.text) + lib_generic/crc32.o (.text) + lib_ppc/extable.o (.text) + lib_generic/zlib.o (.text) + +/* . = env_offset;*/ +/* common/environment.o(.text)*/ + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/amcc/taihu/update.c b/board/amcc/taihu/update.c new file mode 100644 index 00000000000..55ad535c8cb --- /dev/null +++ b/board/amcc/taihu/update.c @@ -0,0 +1,132 @@ +/* + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +#define PCI_M66EN 0x10 + +static uchar buf_33[] = +{ + 0xb5, /* 0x00:hce =1, bss = 0, pae=1, ppdv= 0b10,spe = 1,ebw=0b01*/ + 0x80, /* 0x01~0x03:ptm1ms =0x80000001 */ + 0x00, + 0x00, + 0x00, /* 0x04~0x06:ptm1la = 0x00000000 */ + 0x00, + 0x00, + 0x00, /* 0x07~0x09:ptm2ma = 0x00000000 */ + 0x00, + 0x00, + 0x00, /* 0x0a~0x0c:ptm2la = 0x00000000 */ + 0x00, + 0x00, + 0x10, /* 0x0d~0x0e:vendor id 0x1014*/ + 0x14, + 0x00, /* 0x0f~0x10:device id 0x0000*/ + 0x00, + 0x00, /* 0x11:revision 0x00 */ + 0x00, /* 0x12~0x14:class 0x000000 */ + 0x00, + 0x00, + 0x10, /* 0x15~0x16:subsystem vendor id */ + 0xe8, + 0x00, /* 0x17~0x18:subsystem device id */ + 0x00, + 0x61, /* 0x19: opdv=0b01,cbdv=0b10,ccdv=0b00,ptm2ms_ena=0, ptm1ms_ena=1 */ + 0x68, /* 0x1a: rpci=1,fbmul=0b1010,epdv=0b00 */ + 0x2d, /* 0x1b: fwdvb=0b101,fwdva=0b101 */ + 0x82, /* 0x1c: pllr=1,sscs=0,mpdv=0b00,tun[22-23]=0b10 */ + 0xbe, /* 0x1d: tun[24-31]=0xbe */ + 0x00, + 0x00 +}; + +static uchar buf_66[] = +{ + 0xb5, /* 0x00:hce =1, bss = 0, pae=1, ppdv= 0b10,spe = 1,ebw=0b01*/ + 0x80, /* 0x01~0x03:ptm1ms =0x80000001 */ + 0x00, + 0x00, + 0x00, /* 0x04~0x06:ptm1la = 0x00000000 */ + 0x00, + 0x00, + 0x00, /* 0x07~0x09:ptm2ma = 0x00000000 */ + 0x00, + 0x00, + 0x00, /* 0x0a~0x0c:ptm2la = 0x00000000 */ + 0x00, + 0x00, + 0x10, /* 0x0d~0x0e:vendor id 0x1014*/ + 0x14, + 0x00, /* 0x0f~0x10:device id 0x0000*/ + 0x00, + 0x00, /* 0x11:revision 0x00 */ + 0x00, /* 0x12~0x14:class 0x000000 */ + 0x00, + 0x00, + 0x10, /* 0x15~0x16:subsystem vendor id */ + 0xe8, + 0x00, /* 0x17~0x18:subsystem device id */ + 0x00, + 0x61, /* 0x19: opdv=0b01,cbdv=0b10,ccdv=0b00,ptm2ms_ena=0, ptm1ms_ena=1 */ + 0x68, /* 0x1a: rpci=1,fbmul=0b1010,epdv=0b00 */ + 0x2d, /* 0x1b: fwdvb=0b101,fwdva=0b101 */ + 0x82, /* 0x1c: pllr=1,sscs=0,mpdv=0b00,tun[22-23]=0b10 */ + 0xbe, /* 0x1d: tun[24-31]=0xbe */ + 0x00, + 0x00 +}; + +static int update_boot_eeprom(cmd_tbl_t* cmdtp, int flag, int argc, char *argv[]) +{ + ulong len = 0x20; + uchar chip = CFG_I2C_EEPROM_ADDR; + uchar *pbuf; + uchar base; + int i; + + if ((*(volatile char*)CPLD_REG0_ADDR & PCI_M66EN) != PCI_M66EN) { + pbuf = buf_33; + base = 0x00; + } else { + pbuf = buf_66; + base = 0x40; + } + + for (i = 0; i< len; i++, base++) { + if (i2c_write(chip, base, 1, &pbuf[i],1)!= 0) { + printf("i2c_write fail\n"); + return 1; + } + udelay(11000); + } + + return 0; +} + +U_BOOT_CMD ( + update_boot_eeprom, 1, 1, update_boot_eeprom, + "update_boot_eeprom - update boot eeprom content\n", + NULL + ); diff --git a/common/soft_spi.c b/common/soft_spi.c index 00a57de8aa7..e4250616c28 100644 --- a/common/soft_spi.c +++ b/common/soft_spi.c @@ -79,7 +79,9 @@ void spi_init (void) */ int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar *dout, uchar *din) { +#ifdef CFG_IMMR volatile immap_t *immr = (immap_t *)CFG_IMMR; +#endif uchar tmpdin = 0; uchar tmpdout = 0; int j; diff --git a/cpu/ppc4xx/gpio.c b/cpu/ppc4xx/gpio.c index 0d0e273fc42..50f2fdf1139 100644 --- a/cpu/ppc4xx/gpio.c +++ b/cpu/ppc4xx/gpio.c @@ -186,6 +186,7 @@ void gpio_set_chip_configuration(void) out32(GPIO0_TCR, reg); } +#ifdef GPIO1 if (gpio_core == GPIO1) { /* * Setup output value @@ -203,6 +204,7 @@ void gpio_set_chip_configuration(void) reg = in32(GPIO1_TCR) | (0x80000000 >> (i)); out32(GPIO1_TCR, reg); } +#endif /* GPIO1 */ reg = in32(GPIO_OS(core_add+offs)) & ~(GPIO_MASK >> (j*2)); diff --git a/cpu/ppc4xx/sdram.c b/cpu/ppc4xx/sdram.c index d520cd3ff4c..3a0ca17d9fe 100644 --- a/cpu/ppc4xx/sdram.c +++ b/cpu/ppc4xx/sdram.c @@ -209,8 +209,17 @@ void sdram_init(void) if (get_ram_size(0, mb0cf[i].size) == mb0cf[i].size) { /* - * OK, size detected -> all done + * OK, size detected. Enable second bank if + * defined (assumes same type as bank 0) */ +#ifdef CONFIG_SDRAM_BANK1 + u32 b1cr = mb0cf[i].size | mb0cf[i].reg; + + mtsdram0(mem_mcopt1, 0x00000000); + mtsdram0(mem_mb1cf, b1cr); /* SDRAM0_B1CR */ + mtsdram0(mem_mcopt1, 0x80800000); + udelay(10000); +#endif return; } } diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index 8ecaaea4d9a..18d34456095 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -1869,6 +1869,11 @@ ppc405ep_init: ori r3,r3,CFG_EBC_PB4CR@l mtdcr ebccfgd,r3 #endif +#ifdef CONFIG_TAIHU + mfdcr r4, CPC0_BOOT + andi. r5, r4, CPC0_BOOT_SEP@l + bne strap_0 /* serial eeprom present */ +#endif #ifndef CFG_CPC0_PCI li r3,CPC0_PCI_HOST_CFG_EN @@ -1886,12 +1891,16 @@ ppc405ep_init: beq ..pci_cfg_set /* if not set, then bypass reg write*/ #endif ori r3,r3,CPC0_PCI_ARBIT_EN +#ifdef CONFIG_TAIHU + ori r3,r3,CPC0_PCI_SPE +#endif #else /* CFG_CPC0_PCI */ li r3,CFG_CPC0_PCI #endif /* CFG_CPC0_PCI */ ..pci_cfg_set: mtdcr CPC0_PCI, r3 /* Enable internal arbiter*/ +strap_0: /* !----------------------------------------------------------------------- ! Check to see if chip is in bypass mode. @@ -1947,11 +1956,35 @@ ppc405ep_init: ..no_pllset: #endif /* CONFIG_BUBINGA */ +#ifdef CONFIG_TAIHU + mfdcr r4, CPC0_BOOT + andi. r5, r4, CPC0_BOOT_SEP@l + bne strap_1 /* serial eeprom present */ + addis r5,0,CPLD_REG0_ADDR@h + ori r5,r5,CPLD_REG0_ADDR@l + andi. r5, r5, 0x10 + bne _pci_66mhz +#endif /* CONFIG_TAIHU */ + addis r3,0,PLLMR0_DEFAULT@h /* PLLMR0 default value */ ori r3,r3,PLLMR0_DEFAULT@l /* */ addis r4,0,PLLMR1_DEFAULT@h /* PLLMR1 default value */ ori r4,r4,PLLMR1_DEFAULT@l /* */ +#ifdef CONFIG_TAIHU + b 1f +_pci_66mhz: + addis r3,0,PLLMR0_DEFAULT_PCI66@h + ori r3,r3,PLLMR0_DEFAULT_PCI66@l + addis r4,0,PLLMR1_DEFAULT_PCI66@h + ori r4,r4,PLLMR1_DEFAULT_PCI66@l + b 1f +strap_1: + mfdcr r3, CPC0_PLLMR0 + mfdcr r4, CPC0_PLLMR1 +1: +#endif /* CONFIG_TAIHU */ + b pll_write /* Write the CPC0_PLLMR with new value */ pll_done: diff --git a/dtt/Makefile b/dtt/Makefile index e6cb128f3de..c6a670af173 100644 --- a/dtt/Makefile +++ b/dtt/Makefile @@ -30,7 +30,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)libdtt.a -COBJS = lm75.o ds1621.o adm1021.o lm81.o +COBJS = lm75.o ds1621.o adm1021.o lm81.o ds1775.o SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/dtt/ds1775.c b/dtt/ds1775.c new file mode 100644 index 00000000000..e44cee3279c --- /dev/null +++ b/dtt/ds1775.c @@ -0,0 +1,156 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Dallas Semiconductor's DS1775 Digital Thermometer and Thermostat + */ + +#include + +#ifdef CONFIG_DTT_DS1775 +#include +#include + +#define DTT_I2C_DEV_CODE 0x49 /* Dallas Semi's DS1775 device code */ + +int dtt_read(int sensor, int reg) +{ + int dlen; + uchar data[2]; + + /* + * Calculate sensor address and command + */ + sensor = DTT_I2C_DEV_CODE + (sensor & 0x07); /* Calculate addr of ds1775 */ + + /* + * Prepare to handle 2 byte result + */ + if ((reg == DTT_READ_TEMP) || + (reg == DTT_TEMP_OS) || (reg == DTT_TEMP_HYST)) + dlen = 2; + else + dlen = 1; + + /* + * Now try to read the register + */ + if (i2c_read(sensor, reg, 1, data, dlen) != 0) + return 1; + + /* + * Handle 2 byte result + */ + if (dlen == 2) + return ((int)((short)data[1] + (((short)data[0]) << 8))); + + return (int) data[0]; +} + + +int dtt_write(int sensor, int reg, int val) +{ + int dlen; + uchar data[2]; + + /* + * Calculate sensor address and register + */ + sensor = DTT_I2C_DEV_CODE + (sensor & 0x07); + + /* + * Handle various data sizes + */ + if ((reg == DTT_READ_TEMP) || + (reg == DTT_TEMP_OS) || (reg == DTT_TEMP_HYST)) { + dlen = 2; + data[0] = (char)((val >> 8) & 0xff); /* MSB first */ + data[1] = (char)(val & 0xff); + } else { + dlen = 1; + data[0] = (char)(val & 0xff); + } + + /* + * Write value to device + */ + if (i2c_write(sensor, reg, 1, data, dlen) != 0) + return 1; + + return 0; +} + + +static int _dtt_init(int sensor) +{ + int val; + + /* + * Setup High Temp + */ + val = ((CFG_DTT_MAX_TEMP * 2) << 7) & 0xff80; + if (dtt_write(sensor, DTT_TEMP_OS, val) != 0) + return 1; + udelay(50000); /* Max 50ms */ + + /* + * Setup Low Temp - hysteresis + */ + val = (((CFG_DTT_MAX_TEMP - CFG_DTT_HYSTERESIS) * 2) << 7) & 0xff80; + if (dtt_write(sensor, DTT_TEMP_HYST, val) != 0) + return 1; + udelay(50000); /* Max 50ms */ + + /* + * Setup configuraton register + * + * Fault Tolerance limits 4, Thermometer resolution bits is 9, + * Polarity = Active Low,continuous conversion mode, Thermostat + * mode is interrupt mode + */ + val = 0xa; + if (dtt_write(sensor, DTT_CONFIG, val) != 0) + return 1; + udelay(50000); /* Max 50ms */ + + return 0; +} + + +int dtt_init (void) +{ + int i; + unsigned char sensors[] = CONFIG_DTT_SENSORS; + + for (i = 0; i < sizeof(sensors); i++) { + if (_dtt_init(sensors[i]) != 0) + printf("DTT%d: FAILED\n", i+1); + else + printf("DTT%d: %i C\n", i+1, dtt_get_temp(sensors[i])); + } + + return (0); +} + + +int dtt_get_temp(int sensor) +{ + return (dtt_read(sensor, DTT_READ_TEMP) / 256); +} + + +#endif /* CONFIG_DTT_DS1775 */ diff --git a/include/configs/taihu.h b/include/configs/taihu.h new file mode 100644 index 00000000000..61814a80960 --- /dev/null +++ b/include/configs/taihu.h @@ -0,0 +1,473 @@ +/* + * (C) Copyright 2000-2005 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2005-2007 + * Beijing UD Technology Co., Ltd., taihusupport@amcc.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + + +#define CONFIG_405EP 1 /* this is a PPC405 CPU */ +#define CONFIG_4xx 1 /* member of PPC4xx family */ +#define CONFIG_TAIHU 1 /* on a taihu board */ + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f */ + +#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ + +#define CONFIG_NO_SERIAL_EEPROM + +/*----------------------------------------------------------------------------*/ +#ifdef CONFIG_NO_SERIAL_EEPROM + +/* +!------------------------------------------------------------------------------- +! PLL settings for 333MHz CPU, 111MHz PLB/SDRAM, 55MHz EBC, 33MHz PCI, +! assuming a 33MHz input clock to the 405EP from the C9531. +!------------------------------------------------------------------------------- +*/ +#define PLLMR0_333_111_55_37 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \ + PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \ + PLL_MALDIV_1 | PLL_PCIDIV_3) +#define PLLMR1_333_111_55_37 (PLL_FBKDIV_10 | \ + PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI) +#define PLLMR0_333_111_55_111 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \ + PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \ + PLL_MALDIV_1 | PLL_PCIDIV_1) +#define PLLMR1_333_111_55_111 (PLL_FBKDIV_10 | \ + PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI) + +#define PLLMR0_DEFAULT PLLMR0_333_111_55_37 +#define PLLMR1_DEFAULT PLLMR1_333_111_55_37 +#define PLLMR0_DEFAULT_PCI66 PLLMR0_333_111_55_111 +#define PLLMR1_DEFAULT_PCI66 PLLMR1_333_111_55_111 + +#endif +/*----------------------------------------------------------------------------*/ + +#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ + +#define CONFIG_ENV_OVERWRITE 1 +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootfile=/tftpboot/taihu/uImage\0" \ + "rootpath=/opt/eldk/ppc_4xx\0" \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "kernel_addr=FC000000\0" \ + "ramdisk_addr=FC180000\0" \ + "load=tftp 200000 /tftpboot/taihu/u-boot.bin\0" \ + "update=protect off FFFC0000 FFFFFFFF;era FFFC0000 FFFFFFFF;" \ + "cp.b 200000 FFFC0000 40000\0" \ + "upd=run load;run update\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_self" + +#if 0 +#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ +#else +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_PHY_ADDR 0x14 /* PHY address */ +#define CONFIG_HAS_ETH1 +#define CONFIG_PHY1_ADDR 0x10 /* EMAC1 PHY address */ +#define CONFIG_NET_MULTI 1 +#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */ +#define CONFIG_PHY_RESET 1 + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_CACHE | \ + CFG_CMD_DHCP | \ + CFG_CMD_EEPROM | \ + CFG_CMD_ELF | \ + CFG_CMD_I2C | \ + CFG_CMD_SPI | \ + CFG_CMD_IRQ | \ + CFG_CMD_MII | \ + CFG_CMD_NET | \ + CFG_CMD_PCI | \ + CFG_CMD_PING | \ + CFG_CMD_REGINFO | \ + CFG_CMD_SDRAM ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +#undef CONFIG_SPD_EEPROM /* use SPD EEPROM for setup */ +#define CFG_SDRAM_SIZE_PER_BANK 0x04000000 /* 64MB */ +#define CFG_SDRAM_BANKS 2 + +/* + * SDRAM configuration (please see cpu/ppc/sdram.[ch]) + */ +#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ +#define CONFIG_SDRAM_BANK1 1 /* init onboard SDRAM bank 1 */ + +/* SDRAM timings used in datasheet */ +#define CFG_SDRAM_CL 3 /* CAS latency */ +#define CFG_SDRAM_tRP 20 /* PRECHARGE command period */ +#define CFG_SDRAM_tRC 66 /* ACTIVE-to-ACTIVE command period */ +#define CFG_SDRAM_tRCD 20 /* ACTIVE-to-READ delay */ +#define CFG_SDRAM_tRFC 66 /* Auto refresh period */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* print buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +/* + * If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1. + * If CFG_405_UART_ERRATA_59, then UART divisor is 31. + * Otherwise, UART divisor is determined by CPU Clock and CFG_BASE_BAUD value. + * The Linux BASE_BAUD define should match this configuration. + * baseBaud = cpuClock/(uartDivisor*16) + * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock, + * set Linux BASE_BAUD to 403200. + */ +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */ +#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */ +#define CFG_BASE_BAUD 691200 + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_UART1_CONSOLE 1 + + +/* The following table includes the supported baudrates */ +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + +/*----------------------------------------------------------------------- + * I2C stuff + *----------------------------------------------------------------------- + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +#define CFG_I2C_NOPROBES { 0x69 } /* avoid iprobe hangup (why?) */ +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 6 /* 24C02 requires 5ms delay */ + +#if (CONFIG_COMMANDS & CFG_CMD_EEPROM) +#define CFG_I2C_EEPROM_ADDR 0x50 /* I2C boot EEPROM (24C02W) */ +#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ +#endif + + +#define CONFIG_SOFT_SPI +#define SPI_SCL spi_scl +#define SPI_SDA spi_sda +#define SPI_READ spi_read() +#define SPI_DELAY udelay(2) +#ifndef __ASSEMBLY__ +void spi_scl(int); +void spi_sda(int); +unsigned char spi_read(void); +#endif + +/* standard dtt sensor configuration */ +#define CONFIG_DTT_DS1775 1 +#define CONFIG_DTT_SENSORS { 0 } + +/*----------------------------------------------------------------------- + * PCI stuff + *----------------------------------------------------------------------- + */ +#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */ +#define PCI_HOST_FORCE 1 /* configure as pci host */ +#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ + +#define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + /* resource configuration */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ + +#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ +#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */ +#define CFG_PCI_CLASSCODE 0x0600 /* PCI Class Code: bridge/host */ +#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */ +#define CFG_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */ +#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ +#define CFG_PCI_PTM2LA 0x00000000 /* disabled */ +#define CFG_PCI_PTM2MS 0x00000000 /* disabled */ +#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */ +#define CONFIG_EEPRO100 1 + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_FLASH_BASE 0xFFE00000 +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ +#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN) + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ + +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_FLASH_ADDR0 0x555 +#define CFG_FLASH_ADDR1 0x2aa +#define CFG_FLASH_WORD_SIZE unsigned short + +#ifdef CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#endif /* CFG_ENV_IS_IN_FLASH */ + +/*----------------------------------------------------------------------- + * NVRAM organization + */ +#define CFG_NVRAM_BASE_ADDR 0xf0000000 /* NVRAM base address */ +#define CFG_NVRAM_SIZE 0x1ff8 /* NVRAM size */ + +#ifdef CFG_ENV_IS_IN_NVRAM +#define CFG_ENV_SIZE 0x0ff8 /* Size of Environment vars */ +#define CFG_ENV_ADDR \ + (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE) /* Env*/ +#endif + +/*----------------------------------------------------------------------- + * PPC405 GPIO Configuration + */ +#define CFG_440_GPIO_TABLE { /* GPIO Alternate1 */ \ +{ \ +/* GPIO Core 0 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO0 PerBLast SPI CS */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO1 TS1E */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO2 TS2E */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO3 TS1O */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO4 TS2O */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO5 TS3 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO6 TS4 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO7 TS5 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO8 TS6 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO9 TrcClk */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO10 PerCS1 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO11 PerCS2 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO12 PerCS3 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO13 PerCS4 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO14 PerAddr03 SPI SCLK */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO15 PerAddr04 SPI DI */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO16 PerAddr05 SPI DO */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO17 IRQ0 PCI INTA */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO18 IRQ1 PCI INTB */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO19 IRQ2 PCI INTC */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO20 IRQ3 PCI INTD */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO21 IRQ4 USB */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO22 IRQ5 EBC */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO23 IRQ6 unused */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO24 UART0_DCD UART1 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO25 UART0_DSR */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO26 UART0_RI */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO27 UART0_DTR */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO28 UART1_Rx UART0 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO29 UART1_Tx */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO30 RejectPkt0 User LED1 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO31 RejectPkt1 User LED2 */ \ +} \ +} + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_DCACHE_SIZE 16384 /* For IBM 405EP CPU */ +#define CFG_CACHELINE_SIZE 32 +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Init Memory Controller: + * + * BR0/1 and OR0/1 (FLASH) + */ + +#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */ +#define FLASH_BASE1_PRELIM 0xFC000000 /* FLASH bank #1 */ + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in data cache) + */ +/* use on chip memory (OCM) for temperary stack until sdram is tested */ +#define CFG_TEMP_STACK_OCM 1 + +/* On Chip Memory location */ +#define CFG_OCM_DATA_ADDR 0xF8000000 +#define CFG_OCM_DATA_SIZE 0x1000 +#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of SDRAM */ +#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */ + +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * External Bus Controller (EBC) Setup + */ + +/* Memory Bank 0 (Flash/SRAM) initialization */ +#define CFG_EBC_PB0AP 0x03815600 +#define CFG_EBC_PB0CR 0xFFE3A000 /* BAS=0xFFE,BS=2MB,BU=R/W,BW=16bit */ + +/* Memory Bank 1 (NVRAM/RTC) initialization */ +#define CFG_EBC_PB1AP 0x05815600 +#define CFG_EBC_PB1CR 0xFC0BA000 /* BAS=0xFc0,BS=32MB,BU=R/W,BW=16bit */ + +/* Memory Bank 2 (USB device) initialization */ +#define CFG_EBC_PB2AP 0x03016600 +#define CFG_EBC_PB2CR 0x50018000 /* BAS=0x500,BS=1MB,BU=R/W,BW=8bit */ + +/* Memory Bank 3 (LCM and D-flip-flop) initialization */ +#define CFG_EBC_PB3AP 0x158FF600 +#define CFG_EBC_PB3CR 0x50118000 /* BAS=0x501,BS=1MB,BU=R/W,BW=8bit */ + +/* Memory Bank 4 (not install) initialization */ +#define CFG_EBC_PB4AP 0x158FF600 +#define CFG_EBC_PB4CR 0x5021A000 + +/*----------------------------------------------------------------------- + * Definitions for GPIO setup (PPC405EP specific) + * + * GPIO0[0] - External Bus Controller BLAST output + * GPIO0[1-9] - Instruction trace outputs + * GPIO0[10-13] - External Bus Controller CS_1 - CS_4 outputs + * GPIO0[14-16] - External Bus Controller ABUS3-ABUS5 outputs + * GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs + * GPIO0[24-27] - UART0 control signal inputs/outputs + * GPIO0[28-29] - UART1 data signal input/output + * GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs + */ +#define CFG_GPIO0_OSRH 0x15555550 /* output select high/low */ +#define CFG_GPIO0_OSRL 0x00000110 +#define CFG_GPIO0_ISR1H 0x00000001 /* input select high/low */ +#define CFG_GPIO0_ISR1L 0x15545440 +#define CFG_GPIO0_TSRH 0x00000000 /* three-state select high/low */ +#define CFG_GPIO0_TSRL 0x00000000 +#define CFG_GPIO0_TCR 0xFFFE8117 /* three-state control */ +#define CFG_GPIO0_ODR 0x00000000 /* open drain */ + +#define GPIO0 0 /* GPIO controller 0 */ + +/* the GPIO macros in include/ppc405.h for High/Low registers are backwards */ + +#define GPIOx_OSL (GPIO0_OSRH-GPIO_BASE) +#define GPIOx_TSL (GPIO0_TSRH-GPIO_BASE) +#define GPIOx_IS1L (GPIO0_ISR1H-GPIO_BASE) +#define GPIOx_IS2L (GPIO0_ISR1H-GPIO_BASE) +#define GPIOx_IS3L (GPIO0_ISR1H-GPIO_BASE) + +#define GPIO_OS(x) (x+GPIOx_OSL) /* GPIO output select */ +#define GPIO_TS(x) (x+GPIOx_TSL) /* GPIO three-state select */ +#define GPIO_IS1(x) (x+GPIOx_IS1L) /* GPIO input select */ +#define GPIO_IS2(x) (x+GPIOx_IS1L) +#define GPIO_IS3(x) (x+GPIOx_IS1L) + +#define CPLD_REG0_ADDR 0x50100000 +#define CPLD_REG1_ADDR 0x50100001 +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +#endif /* __CONFIG_H */ diff --git a/include/dtt.h b/include/dtt.h index 842a761c909..2e8c690158f 100644 --- a/include/dtt.h +++ b/include/dtt.h @@ -29,6 +29,7 @@ #if defined(CONFIG_DTT_LM75) || \ defined(CONFIG_DTT_DS1621) || \ + defined(CONFIG_DTT_DS1775) || \ defined(CONFIG_DTT_LM81) || \ defined(CONFIG_DTT_ADM1021) @@ -78,6 +79,13 @@ extern int dtt_get_temp(int sensor); #define DTT_CONFIG 0xAC #endif +#if defined(CONFIG_DTT_DS1775) +#define DTT_READ_TEMP 0x0 +#define DTT_CONFIG 0x1 +#define DTT_TEMP_HYST 0x2 +#define DTT_TEMP_OS 0x3 +#endif + #if defined(CONFIG_DTT_ADM1021) #define DTT_READ_LOC_VALUE 0x00 #define DTT_READ_REM_VALUE 0x01 -- cgit v1.3.1 From 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6 Mon Sep 17 00:00:00 2001 From: Rafal Jaworowski Date: Fri, 27 Jul 2007 14:43:59 +0200 Subject: [ADS5121] Support for the ADS5121 board The following MPC5121e subsystems are supported: - low-level CPU init - NOR Boot Flash (common CFI driver) - DDR SDRAM - FEC - I2C - Watchdog Signed-off-by: Grzegorz Bernacki Signed-off-by: Rafal Jaworowski Signed-off-by: Jan Wrobel --- MAKEALL | 10 +- Makefile | 7 + board/ads5121/Makefile | 50 +++ board/ads5121/ads5121.c | 188 ++++++++++ board/ads5121/config.mk | 23 ++ board/ads5121/u-boot.lds | 122 +++++++ cpu/mpc512x/Makefile | 46 +++ cpu/mpc512x/config.mk | 25 ++ cpu/mpc512x/cpu.c | 127 +++++++ cpu/mpc512x/cpu_init.c | 87 +++++ cpu/mpc512x/fec.c | 801 ++++++++++++++++++++++++++++++++++++++++++ cpu/mpc512x/fec.h | 224 ++++++++++++ cpu/mpc512x/i2c.c | 431 +++++++++++++++++++++++ cpu/mpc512x/interrupts.c | 61 ++++ cpu/mpc512x/serial.c | 197 +++++++++++ cpu/mpc512x/speed.c | 135 +++++++ cpu/mpc512x/start.S | 780 ++++++++++++++++++++++++++++++++++++++++ cpu/mpc512x/traps.c | 205 +++++++++++ include/asm-ppc/e300.h | 1 + include/asm-ppc/global_data.h | 4 + include/asm-ppc/immap_512x.h | 569 ++++++++++++++++++++++++++++++ include/common.h | 8 +- include/configs/ads5121.h | 410 +++++++++++++++++++++ include/mpc512x.h | 398 +++++++++++++++++++++ net/eth.c | 4 + 25 files changed, 4911 insertions(+), 2 deletions(-) create mode 100644 board/ads5121/Makefile create mode 100644 board/ads5121/ads5121.c create mode 100644 board/ads5121/config.mk create mode 100644 board/ads5121/u-boot.lds create mode 100644 cpu/mpc512x/Makefile create mode 100644 cpu/mpc512x/config.mk create mode 100644 cpu/mpc512x/cpu.c create mode 100644 cpu/mpc512x/cpu_init.c create mode 100644 cpu/mpc512x/fec.c create mode 100644 cpu/mpc512x/fec.h create mode 100644 cpu/mpc512x/i2c.c create mode 100644 cpu/mpc512x/interrupts.c create mode 100644 cpu/mpc512x/serial.c create mode 100644 cpu/mpc512x/speed.c create mode 100644 cpu/mpc512x/start.S create mode 100644 cpu/mpc512x/traps.c create mode 100644 include/asm-ppc/immap_512x.h create mode 100644 include/configs/ads5121.h create mode 100644 include/mpc512x.h (limited to 'Makefile') diff --git a/MAKEALL b/MAKEALL index 127faa83a32..2a03b687083 100755 --- a/MAKEALL +++ b/MAKEALL @@ -43,6 +43,14 @@ LIST_5xxx=" \ TQM5200S v38b \ " +######################################################################### +## MPC512x Systems +######################################################################### + +LIST_512x=" \ + ads5121 \ +" + ######################################################################### ## MPC8xx Systems ######################################################################### @@ -365,7 +373,7 @@ do microblaze| \ mips|mips_el| \ nios|nios2| \ - ppc|5xx|5xxx|8xx|8220|824x|8260|83xx|85xx|86xx|4xx|7xx|74xx| \ + ppc|5xx|5xxx|512x|8xx|8220|824x|8260|83xx|85xx|86xx|4xx|7xx|74xx| \ x86|I486) for target in `eval echo '$LIST_'${arg}` do diff --git a/Makefile b/Makefile index 3af9962e678..5b87aad5b9f 100644 --- a/Makefile +++ b/Makefile @@ -641,6 +641,13 @@ motionpro_config: unconfig @$(MKCONFIG) motionpro ppc mpc5xxx motionpro +######################################################################### +## MPC512x Systems +######################################################################### +ads5121_config: unconfig + @$(MKCONFIG) ads5121 ppc mpc512x ads5121 + + ######################################################################### ## MPC8xx Systems ######################################################################### diff --git a/board/ads5121/Makefile b/board/ads5121/Makefile new file mode 100644 index 00000000000..cd8148c43ea --- /dev/null +++ b/board/ads5121/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2007 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/ads5121/ads5121.c b/board/ads5121/ads5121.c new file mode 100644 index 00000000000..0a99a34ac05 --- /dev/null +++ b/board/ads5121/ads5121.c @@ -0,0 +1,188 @@ +/* + * (C) Copyright 2007 DENX Software Engineering + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include +#include +#include +#include + +/* Clocks in use */ +#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \ + CLOCK_SCCR1_LPC_EN | \ + CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \ + CLOCK_SCCR1_PSCFIFO_EN | \ + CLOCK_SCCR1_DDR_EN | \ + CLOCK_SCCR1_FEC_EN) + +#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_MEM_EN | \ + CLOCK_SCCR2_SPDIF_EN | \ + CLOCK_SCCR2_I2C_EN) + +#define CSAW_START(start) ((start) & 0xFFFF0000) +#define CSAW_STOP(start, size) (((start) + (size) - 1) >> 16) + +long int fixed_sdram(void); + +int board_early_init_f (void) +{ + volatile immap_t *im = (immap_t *) CFG_IMMR; + u32 lpcaw; + + /* + * Initialize Local Window for the CPLD registers access (CS2 selects + * the CPLD chip) + */ + im->sysconf.lpcs2aw = CSAW_START(CFG_CPLD_BASE) | + CSAW_STOP(CFG_CPLD_BASE, CFG_CPLD_SIZE); + im->lpc.cs_cfg[2] = CFG_CS2_CFG; + + /* + * According to MPC5121e RM, configuring local access windows should + * be followed by a dummy read of the config register that was + * modified last and an isync + */ + lpcaw = im->sysconf.lpcs2aw; + __asm__ __volatile__ ("isync"); + + /* + * Disable Boot NOR FLASH write protect - CPLD Reg 8 NOR FLASH Control + * + * Without this the flash identification routine fails, as it needs to issue + * write commands in order to establish the device ID. + */ + *((volatile u8 *)(CFG_CPLD_BASE + 0x08)) = 0xC1; + + /* + * Enable clocks + */ + im->clk.sccr[0] = SCCR1_CLOCKS_EN; + im->clk.sccr[1] = SCCR2_CLOCKS_EN; + + return 0; +} + +long int initdram (int board_type) +{ + u32 msize = 0; + + puts ("Initializing\n"); + msize = fixed_sdram (); + puts (" DDR RAM: "); + + return msize; +} + +/* + * fixed sdram init -- the board doesn't use memory modules that have serial presence + * detect or similar mechanism for discovery of the DRAM settings + */ +long int fixed_sdram (void) +{ + volatile immap_t *im = (immap_t *) CFG_IMMR; + u32 msize = CFG_DDR_SIZE * 1024 * 1024; + u32 msize_log2 = __ilog2 (msize); + u32 i; + + /* Initialize IO Control */ + im->io_ctrl.regs[MEM_IDX] = IOCTRL_MUX_DDR; + + /* Initialize DDR Local Window */ + im->sysconf.ddrlaw.bar = CFG_DDR_BASE & 0xFFFFF000; + im->sysconf.ddrlaw.ar = msize_log2 - 1; + + /* + * According to MPC5121e RM, configuring local access windows should + * be followed by a dummy read of the config register that was + * modified last and an isync + */ + i = im->sysconf.ddrlaw.ar; + __asm__ __volatile__ ("isync"); + + /* Enable DDR */ + im->mddrc.ddr_sys_config = CFG_MDDRC_SYS_CFG_EN; + + /* Initialize DDR Priority Manager */ + im->mddrc.prioman_config1 = CFG_MDDRCGRP_PM_CFG1; + im->mddrc.prioman_config2 = CFG_MDDRCGRP_PM_CFG2; + im->mddrc.hiprio_config = CFG_MDDRCGRP_HIPRIO_CFG; + im->mddrc.lut_table0_main_upper = CFG_MDDRCGRP_LUT0_MU; + im->mddrc.lut_table1_main_upper = CFG_MDDRCGRP_LUT1_MU; + im->mddrc.lut_table2_main_upper = CFG_MDDRCGRP_LUT2_MU; + im->mddrc.lut_table3_main_upper = CFG_MDDRCGRP_LUT3_MU; + im->mddrc.lut_table4_main_upper = CFG_MDDRCGRP_LUT4_MU; + im->mddrc.lut_table0_main_lower = CFG_MDDRCGRP_LUT0_ML; + im->mddrc.lut_table1_main_lower = CFG_MDDRCGRP_LUT1_ML; + im->mddrc.lut_table2_main_lower = CFG_MDDRCGRP_LUT2_ML; + im->mddrc.lut_table3_main_lower = CFG_MDDRCGRP_LUT3_ML; + im->mddrc.lut_table4_main_lower = CFG_MDDRCGRP_LUT4_ML; + im->mddrc.lut_table0_alternate_upper = CFG_MDDRCGRP_LUT0_AU; + im->mddrc.lut_table1_alternate_upper = CFG_MDDRCGRP_LUT1_AU; + im->mddrc.lut_table2_alternate_upper = CFG_MDDRCGRP_LUT2_AU; + im->mddrc.lut_table3_alternate_upper = CFG_MDDRCGRP_LUT3_AU; + im->mddrc.lut_table4_alternate_upper = CFG_MDDRCGRP_LUT4_AU; + im->mddrc.lut_table0_alternate_lower = CFG_MDDRCGRP_LUT0_AU; + im->mddrc.lut_table1_alternate_lower = CFG_MDDRCGRP_LUT1_AL; + im->mddrc.lut_table2_alternate_lower = CFG_MDDRCGRP_LUT2_AL; + im->mddrc.lut_table3_alternate_lower = CFG_MDDRCGRP_LUT3_AL; + im->mddrc.lut_table4_alternate_lower = CFG_MDDRCGRP_LUT4_AL; + + /* Initialize MDDRC */ + im->mddrc.ddr_sys_config = CFG_MDDRC_SYS_CFG; + im->mddrc.ddr_time_config0 = CFG_MDDRC_TIME_CFG0; + im->mddrc.ddr_time_config1 = CFG_MDDRC_TIME_CFG1; + im->mddrc.ddr_time_config2 = CFG_MDDRC_TIME_CFG2; + + /* Initialize DDR */ + for (i = 0; i < 10; i++) + im->mddrc.ddr_command = CFG_MICRON_NOP; + + im->mddrc.ddr_command = CFG_MICRON_PCHG_ALL; + im->mddrc.ddr_command = CFG_MICRON_EM2; + im->mddrc.ddr_command = CFG_MICRON_EM3; + im->mddrc.ddr_command = CFG_MICRON_EN_DLL; + im->mddrc.ddr_command = CFG_MICRON_RST_DLL; + im->mddrc.ddr_command = CFG_MICRON_PCHG_ALL; + im->mddrc.ddr_command = CFG_MICRON_RFSH; + im->mddrc.ddr_command = CFG_MICRON_INIT_DEV_OP; + im->mddrc.ddr_command = CFG_MICRON_OCD_DEFAULT; + im->mddrc.ddr_command = CFG_MICRON_OCD_EXIT; + + for (i = 0; i < 10; i++) + im->mddrc.ddr_command = CFG_MICRON_NOP; + + /* Start MDDRC */ + im->mddrc.ddr_time_config0 = CFG_MDDRC_TIME_CFG0_RUN; + im->mddrc.ddr_sys_config = CFG_MDDRC_SYS_CFG_RUN; + + return msize; +} + +int checkboard (void) +{ + ushort brd_rev = *(vu_short *) (CFG_CPLD_BASE + 0x00); + uchar cpld_rev = *(vu_char *) (CFG_CPLD_BASE + 0x02); + + printf ("Board: ADS5121 rev. 0x%04x (CPLD rev. 0x%02x)\n", + brd_rev, cpld_rev); + return 0; +} diff --git a/board/ads5121/config.mk b/board/ads5121/config.mk new file mode 100644 index 00000000000..14998f47506 --- /dev/null +++ b/board/ads5121/config.mk @@ -0,0 +1,23 @@ +# +# (C) Copyright 2007 DENX Software Engineering +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0xFFF00000 diff --git a/board/ads5121/u-boot.lds b/board/ads5121/u-boot.lds new file mode 100644 index 00000000000..038d8495531 --- /dev/null +++ b/board/ads5121/u-boot.lds @@ -0,0 +1,122 @@ +/* + * (C) Copyright 2007 DENX Software Engineering. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/mpc512x/start.o (.text) + *(.text) + *(.fixup) + *(.got1) + . = ALIGN(16); + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x0FFF) & 0xFFFFF000; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __fixup_entries = (. - _FIXUP_TABLE_) >> 2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(4096); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(4096); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} +ENTRY(_start) diff --git a/cpu/mpc512x/Makefile b/cpu/mpc512x/Makefile new file mode 100644 index 00000000000..2be35b2bc62 --- /dev/null +++ b/cpu/mpc512x/Makefile @@ -0,0 +1,46 @@ +# +# (C) Copyright 2007 DENX Software Engineering +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(CPU).a + +START = start.o +COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o serial.o fec.o i2c.o + +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/cpu/mpc512x/config.mk b/cpu/mpc512x/config.mk new file mode 100644 index 00000000000..8a07c5a3b67 --- /dev/null +++ b/cpu/mpc512x/config.mk @@ -0,0 +1,25 @@ +# +# (C) Copyright 2007 DENX Software Engineering +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi + +PLATFORM_CPPFLAGS += -DCONFIG_MPC512X -DCONFIG_E300 \ + -ffixed-r2 -ffixed-r29 -msoft-float -mcpu=603e diff --git a/cpu/mpc512x/cpu.c b/cpu/mpc512x/cpu.c new file mode 100644 index 00000000000..3be565ad034 --- /dev/null +++ b/cpu/mpc512x/cpu.c @@ -0,0 +1,127 @@ +/* + * Copyright (C) 2004-2006 Freescale Semiconductor, Inc. + * (C) Copyright 2007 DENX Software Engineering + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * CPU specific code for the MPC512x family. + * + * Derived from the MPC83xx code. + */ + +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +int checkcpu (void) +{ + volatile immap_t *immr = (immap_t *) CFG_IMMR; + ulong clock = gd->cpu_clk; + u32 pvr = get_pvr (); + u32 spridr = immr->sysconf.spridr; + char buf[32]; + + puts("CPU: "); + + switch (spridr & 0xffff0000) { + case SPR_5121E: + puts ("MPC5121e "); + break; + default: + printf ("Unknown part ID %08x ", spridr & 0xffff0000); + } + printf ("rev. %d.%d, Core ", SVR_MJREV (spridr), SVR_MNREV (spridr)); + + switch (pvr & 0xffff0000) { + case PVR_E300C4: + puts ("e300c4 "); + break; + default: + puts ("unknown "); + } + printf ("at %s MHz, CSB at %3d MHz\n", strmhz(buf, clock), + gd->csb_clk / 1000000); + return 0; +} + + +int +do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + ulong msr; + volatile immap_t *immap = (immap_t *) CFG_IMMR; + + /* Interrupts and MMU off */ + __asm__ __volatile__ ("mfmsr %0":"=r" (msr):); + + msr &= ~( MSR_EE | MSR_IR | MSR_DR); + __asm__ __volatile__ ("mtmsr %0"::"r" (msr)); + + /* + * Enable Reset Control Reg - "RSTE" is the magic word that let us go + */ + immap->reset.rpr = 0x52535445; + + /* Verify Reset Control Reg is enabled */ + while (!((immap->reset.rcer) & RCER_CRE)) + ; + + printf ("Resetting the board.\n"); + udelay(200); + + /* Perform reset */ + immap->reset.rcr = RCR_SWHR; + + /* Unreached... */ + return 1; +} + + +/* + * Get timebase clock frequency (like cpu_clk in Hz) + */ +unsigned long get_tbclk (void) +{ + ulong tbclk; + + tbclk = (gd->bus_clk + 3L) / 4L; + + return tbclk; +} + + +#if defined(CONFIG_WATCHDOG) +void watchdog_reset (void) +{ + int re_enable = disable_interrupts (); + + /* Reset watchdog */ + volatile immap_t *immr = (immap_t *) CFG_IMMR; + immr->wdt.swsrr = 0x556c; + immr->wdt.swsrr = 0xaa39; + + if (re_enable) + enable_interrupts (); +} +#endif diff --git a/cpu/mpc512x/cpu_init.c b/cpu/mpc512x/cpu_init.c new file mode 100644 index 00000000000..566e08b0ddd --- /dev/null +++ b/cpu/mpc512x/cpu_init.c @@ -0,0 +1,87 @@ +/* + * Copyright (C) 2004-2006 Freescale Semiconductor, Inc. + * (C) Copyright 2007 DENX Software Engineering + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Derived from the MPC83xx code. + * + */ + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Set up the memory map, initialize registers, + */ +void cpu_init_f (volatile immap_t * im) +{ + u32 ips_div; + + /* Pointer is writable since we allocated a register for it */ + gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET); + + /* Clear initial global data */ + memset ((void *) gd, 0, sizeof (gd_t)); + + /* system performance tweaking */ + +#ifdef CFG_ACR_PIPE_DEP + /* Arbiter pipeline depth */ + im->arbiter.acr = (im->arbiter.acr & ~ACR_PIPE_DEP) | + (CFG_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT); +#endif + +#ifdef CFG_ACR_RPTCNT + /* Arbiter repeat count */ + im->arbiter.acr = ((im->arbiter.acr & ~(ACR_RPTCNT)) | + (CFG_ACR_RPTCNT << ACR_RPTCNT_SHIFT)); +#endif + + /* RSR - Reset Status Register - clear all status */ + gd->reset_status = im->reset.rsr; + im->reset.rsr = ~(RSR_RES); + + /* + * RMR - Reset Mode Register - enable checkstop reset + */ + im->reset.rmr = (RMR_CSRE & (1 << RMR_CSRE_SHIFT)); + + /* Set IPS-CSB divider: IPS = 1/2 CSB */ + ips_div = im->clk.scfr[0]; + ips_div &= ~(SCFR1_IPS_DIV_MASK); + ips_div |= SCFR1_IPS_DIV << SCFR1_IPS_DIV_SHIFT; + im->clk.scfr[0] = ips_div; + + /* + * Enable Time Base/Decrementer + * + * NOTICE: TB needs to be enabled as early as possible in order to + * have udelay() working; if not enabled, usually leads to a hang, like + * during FLASH chip identification etc. + */ + im->sysconf.spcr |= SPCR_TBEN; +} + +int cpu_init_r (void) +{ + return 0; +} diff --git a/cpu/mpc512x/fec.c b/cpu/mpc512x/fec.c new file mode 100644 index 00000000000..f1b7a2563ed --- /dev/null +++ b/cpu/mpc512x/fec.c @@ -0,0 +1,801 @@ +/* + * (C) Copyright 2003-2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Derived from the MPC8xx FEC driver. + * Adapted for MPC512x by Grzegorz Bernacki + */ + +#include +#include +#include +#include +#include +#include "fec.h" + +DECLARE_GLOBAL_DATA_PTR; + +#define DEBUG 0 + +#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) && \ + defined(CONFIG_MPC512x_FEC) + +#if !(defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)) +#error "CONFIG_MII has to be defined!" +#endif + +#if (DEBUG & 0x40) +static uint32 local_crc32(char *string, unsigned int crc_value, int len); +#endif + +int fec512x_miiphy_read(char *devname, uint8 phyAddr, uint8 regAddr, uint16 * retVal); +int fec512x_miiphy_write(char *devname, uint8 phyAddr, uint8 regAddr, uint16 data); +int mpc512x_fec_init_phy(struct eth_device *dev, bd_t * bis); + +/********************************************************************/ +#if (DEBUG & 0x2) +static void mpc512x_fec_phydump (char *devname) +{ + uint16 phyStatus, i; + uint8 phyAddr = CONFIG_PHY_ADDR; + uint8 reg_mask[] = { + /* regs to print: 0...8, 21,27,31 */ + 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, + }; + + for (i = 0; i < 32; i++) { + if (reg_mask[i]) { + miiphy_read (devname, phyAddr, i, &phyStatus); + printf ("Mii reg %d: 0x%04x\n", i, phyStatus); + } + } +} +#endif + +/********************************************************************/ +static int mpc512x_fec_bd_init (mpc512x_fec_priv *fec) +{ + int ix; + + /* + * Receive BDs init + */ + for (ix = 0; ix < FEC_RBD_NUM; ix++) { + fec->bdBase->rbd[ix].dataPointer = (uint32)&fec->bdBase->recv_frames[ix]; + fec->bdBase->rbd[ix].status = FEC_RBD_EMPTY; + fec->bdBase->rbd[ix].dataLength = 0; + } + + /* + * have the last RBD to close the ring + */ + fec->bdBase->rbd[ix - 1].status |= FEC_RBD_WRAP; + fec->rbdIndex = 0; + + /* + * Trasmit BDs init + */ + for (ix = 0; ix < FEC_TBD_NUM; ix++) { + fec->bdBase->tbd[ix].status = 0; + } + + /* + * Have the last TBD to close the ring + */ + fec->bdBase->tbd[ix - 1].status |= FEC_TBD_WRAP; + + /* + * Initialize some indices + */ + fec->tbdIndex = 0; + fec->usedTbdIndex = 0; + fec->cleanTbdNum = FEC_TBD_NUM; + + return 0; +} + +/********************************************************************/ +static void mpc512x_fec_rbd_clean (mpc512x_fec_priv *fec, volatile FEC_RBD * pRbd) +{ + /* + * Reset buffer descriptor as empty + */ + if ((fec->rbdIndex) == (FEC_RBD_NUM - 1)) + pRbd->status = (FEC_RBD_WRAP | FEC_RBD_EMPTY); + else + pRbd->status = FEC_RBD_EMPTY; + + pRbd->dataLength = 0; + + /* + * Increment BD count + */ + fec->rbdIndex = (fec->rbdIndex + 1) % FEC_RBD_NUM; + + /* + * Now, we have an empty RxBD, notify FEC + */ + fec->eth->r_des_active = 0x01000000; /* Descriptor polling active */ +} + +/********************************************************************/ +static void mpc512x_fec_tbd_scrub (mpc512x_fec_priv *fec) +{ + volatile FEC_TBD *pUsedTbd; + +#if (DEBUG & 0x1) + printf ("tbd_scrub: fec->cleanTbdNum = %d, fec->usedTbdIndex = %d\n", + fec->cleanTbdNum, fec->usedTbdIndex); +#endif + + /* + * process all the consumed TBDs + */ + while (fec->cleanTbdNum < FEC_TBD_NUM) { + pUsedTbd = &fec->bdBase->tbd[fec->usedTbdIndex]; + if (pUsedTbd->status & FEC_TBD_READY) { +#if (DEBUG & 0x20) + printf ("Cannot clean TBD %d, in use\n", fec->usedTbdIndex); +#endif + return; + } + + /* + * clean this buffer descriptor + */ + if (fec->usedTbdIndex == (FEC_TBD_NUM - 1)) + pUsedTbd->status = FEC_TBD_WRAP; + else + pUsedTbd->status = 0; + + /* + * update some indeces for a correct handling of the TBD ring + */ + fec->cleanTbdNum++; + fec->usedTbdIndex = (fec->usedTbdIndex + 1) % FEC_TBD_NUM; + } +} + +/********************************************************************/ +static void mpc512x_fec_set_hwaddr (mpc512x_fec_priv *fec, char *mac) +{ + uint8 currByte; /* byte for which to compute the CRC */ + int byte; /* loop - counter */ + int bit; /* loop - counter */ + uint32 crc = 0xffffffff; /* initial value */ + + /* + * The algorithm used is the following: + * we loop on each of the six bytes of the provided address, + * and we compute the CRC by left-shifting the previous + * value by one position, so that each bit in the current + * byte of the address may contribute the calculation. If + * the latter and the MSB in the CRC are different, then + * the CRC value so computed is also ex-ored with the + * "polynomium generator". The current byte of the address + * is also shifted right by one bit at each iteration. + * This is because the CRC generatore in hardware is implemented + * as a shift-register with as many ex-ores as the radixes + * in the polynomium. This suggests that we represent the + * polynomiumm itself as a 32-bit constant. + */ + for (byte = 0; byte < 6; byte++) { + currByte = mac[byte]; + for (bit = 0; bit < 8; bit++) { + if ((currByte & 0x01) ^ (crc & 0x01)) { + crc >>= 1; + crc = crc ^ 0xedb88320; + } else { + crc >>= 1; + } + currByte >>= 1; + } + } + + crc = crc >> 26; + + /* + * Set individual hash table register + */ + if (crc >= 32) { + fec->eth->iaddr1 = (1 << (crc - 32)); + fec->eth->iaddr2 = 0; + } else { + fec->eth->iaddr1 = 0; + fec->eth->iaddr2 = (1 << crc); + } + + /* + * Set physical address + */ + fec->eth->paddr1 = (mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3]; + fec->eth->paddr2 = (mac[4] << 24) + (mac[5] << 16) + 0x8808; +} + +/********************************************************************/ +static int mpc512x_fec_init (struct eth_device *dev, bd_t * bis) +{ + mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv; + +#if (DEBUG & 0x1) + printf ("mpc512x_fec_init... Begin\n"); +#endif + + /* Set interrupt mask register */ + fec->eth->imask = 0x00000000; + + /* Clear FEC-Lite interrupt event register(IEVENT) */ + fec->eth->ievent = 0xffffffff; + + /* Set transmit fifo watermark register(X_WMRK), default = 64 */ + fec->eth->x_wmrk = 0x0; + + /* Set Opcode/Pause Duration Register */ + fec->eth->op_pause = 0x00010020; + + /* Frame length=1518; MII mode */ + fec->eth->r_cntrl = 0x05ee000c; + + /* Half-duplex, heartbeat disabled */ + fec->eth->x_cntrl = 0x00000000; + + /* Enable MIB counters */ + fec->eth->mib_control = 0x0; + + /* Setup recv fifo start and buff size */ + fec->eth->r_fstart = 0x500; + fec->eth->r_buff_size = 0x5e0; + + /* Setup BD base addresses */ + fec->eth->r_des_start = (uint32)fec->bdBase->rbd; + fec->eth->x_des_start = (uint32)fec->bdBase->tbd; + + /* DMA Control */ + fec->eth->dma_control = 0xc0000000; + + /* Enable FEC */ + fec->eth->ecntrl |= 0x00000006; + + /* Initilize addresses and status words of BDs */ + mpc512x_fec_bd_init (fec); + + /* Descriptor polling active */ + fec->eth->r_des_active = 0x01000000; + +#if (DEBUG & 0x1) + printf("mpc512x_fec_init... Done \n"); +#endif + return 1; +} + +/********************************************************************/ +int mpc512x_fec_init_phy (struct eth_device *dev, bd_t * bis) +{ + mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv; + const uint8 phyAddr = CONFIG_PHY_ADDR; /* Only one PHY */ + int timeout = 1; + uint16 phyStatus; + +#if (DEBUG & 0x1) + printf ("mpc512x_fec_init_phy... Begin\n"); +#endif + + /* + * Clear FEC-Lite interrupt event register(IEVENT) + */ + fec->eth->ievent = 0xffffffff; + + /* + * Set interrupt mask register + */ + fec->eth->imask = 0x00000000; + + if (fec->xcv_type != SEVENWIRE) { + /* + * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock + * and do not drop the Preamble. + */ + fec->eth->mii_speed = (((gd->ipb_clk / 1000000) / 5) + 1) << 1; + + /* + * Reset PHY, then delay 300ns + */ + miiphy_write (dev->name, phyAddr, 0x0, 0x8000); + udelay (1000); + + if (fec->xcv_type == MII10) { + /* + * Force 10Base-T, FDX operation + */ +#if (DEBUG & 0x2) + printf ("Forcing 10 Mbps ethernet link... "); +#endif + miiphy_read (dev->name, phyAddr, 0x1, &phyStatus); + + miiphy_write (dev->name, phyAddr, 0x0, 0x0180); + + timeout = 20; + do { /* wait for link status to go down */ + udelay (10000); + if ((timeout--) == 0) { +#if (DEBUG & 0x2) + printf ("hmmm, should not have waited..."); +#endif + break; + } + miiphy_read (dev->name, phyAddr, 0x1, &phyStatus); +#if (DEBUG & 0x2) + printf ("="); +#endif + } while ((phyStatus & 0x0004)); /* !link up */ + + timeout = 1000; + do { /* wait for link status to come back up */ + udelay (10000); + if ((timeout--) == 0) { + printf ("failed. Link is down.\n"); + break; + } + miiphy_read (dev->name, phyAddr, 0x1, &phyStatus); +#if (DEBUG & 0x2) + printf ("+"); +#endif + } while (!(phyStatus & 0x0004)); /* !link up */ + +#if (DEBUG & 0x2) + printf ("done.\n"); +#endif + } else { /* MII100 */ + /* + * Set the auto-negotiation advertisement register bits + */ + miiphy_write (dev->name, phyAddr, 0x4, 0x01e1); + + /* + * Set MDIO bit 0.12 = 1(&& bit 0.9=1?) to enable auto-negotiation + */ + miiphy_write (dev->name, phyAddr, 0x0, 0x1200); + + /* + * Wait for AN completion + */ + timeout = 50000; + do { + udelay (1000); + + if ((timeout--) == 0) { +#if (DEBUG & 0x2) + printf ("PHY auto neg 0 failed...\n"); +#endif + return -1; + } + + if (miiphy_read (dev->name, phyAddr, 0x1, &phyStatus) != 0) { +#if (DEBUG & 0x2) + printf ("PHY auto neg 1 failed 0x%04x...\n", phyStatus); +#endif + return -1; + } + } while (!(phyStatus & 0x0004)); + +#if (DEBUG & 0x2) + printf ("PHY auto neg complete! \n"); +#endif + } + } + +#if (DEBUG & 0x2) + if (fec->xcv_type != SEVENWIRE) + mpc512x_fec_phydump (dev->name); +#endif + +#if (DEBUG & 0x1) + printf ("mpc512x_fec_init_phy... Done \n"); +#endif + return 1; +} + +/********************************************************************/ +static void mpc512x_fec_halt (struct eth_device *dev) +{ + mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv; + int counter = 0xffff; + +#if (DEBUG & 0x2) + if (fec->xcv_type != SEVENWIRE) + mpc512x_fec_phydump (dev->name); +#endif + + /* + * mask FEC chip interrupts + */ + fec->eth->imask = 0; + + /* + * issue graceful stop command to the FEC transmitter if necessary + */ + fec->eth->x_cntrl |= 0x00000001; + + /* + * wait for graceful stop to register + */ + while ((counter--) && (!(fec->eth->ievent & 0x10000000))) ; + + /* + * Disable the Ethernet Controller + */ + fec->eth->ecntrl &= 0xfffffffd; + + /* + * Issue a reset command to the FEC chip + */ + fec->eth->ecntrl |= 0x1; + + /* + * wait at least 16 clock cycles + */ + udelay (10); +#if (DEBUG & 0x3) + printf ("Ethernet task stopped\n"); +#endif +} + +/********************************************************************/ + +static int mpc512x_fec_send (struct eth_device *dev, volatile void *eth_data, + int data_length) +{ + /* + * This routine transmits one frame. This routine only accepts + * 6-byte Ethernet addresses. + */ + mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv; + volatile FEC_TBD *pTbd; + +#if (DEBUG & 0x20) + printf("tbd status: 0x%04x\n", fec->tbdBase[fec->tbdIndex].status); +#endif + + /* + * Clear Tx BD ring at first + */ + mpc512x_fec_tbd_scrub (fec); + + /* + * Check for valid length of data. + */ + if ((data_length > 1500) || (data_length <= 0)) { + return -1; + } + + /* + * Check the number of vacant TxBDs. + */ + if (fec->cleanTbdNum < 1) { +#if (DEBUG & 0x20) + printf ("No available TxBDs ...\n"); +#endif + return -1; + } + + /* + * Get the first TxBD to send the mac header + */ + pTbd = &fec->bdBase->tbd[fec->tbdIndex]; + pTbd->dataLength = data_length; + pTbd->dataPointer = (uint32)eth_data; + pTbd->status |= FEC_TBD_LAST | FEC_TBD_TC | FEC_TBD_READY; + fec->tbdIndex = (fec->tbdIndex + 1) % FEC_TBD_NUM; + + /* Activate transmit Buffer Descriptor polling */ + fec->eth->x_des_active = 0x01000000; /* Descriptor polling active */ + +#if (DEBUG & 0x8) + printf ( "+" ); +#endif + + fec->cleanTbdNum -= 1; + + /* + * wait until frame is sent . + */ + while (pTbd->status & FEC_TBD_READY) { + udelay (10); +#if (DEBUG & 0x8) + printf ("TDB status = %04x\n", pTbd->status); +#endif + } + + return 0; +} + + +/********************************************************************/ +static int mpc512x_fec_recv (struct eth_device *dev) +{ + /* + * This command pulls one frame from the card + */ + mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv; + volatile FEC_RBD *pRbd = &fec->bdBase->rbd[fec->rbdIndex]; + unsigned long ievent; + int frame_length, len = 0; + uchar buff[FEC_MAX_PKT_SIZE]; + +#if (DEBUG & 0x1) + printf ("mpc512x_fec_recv %d Start...\n", fec->rbdIndex); +#endif +#if (DEBUG & 0x8) + printf( "-" ); +#endif + + /* + * Check if any critical events have happened + */ + ievent = fec->eth->ievent; + fec->eth->ievent = ievent; + if (ievent & 0x20060000) { + /* BABT, Rx/Tx FIFO errors */ + mpc512x_fec_halt (dev); + mpc512x_fec_init (dev, NULL); + return 0; + } + if (ievent & 0x80000000) { + /* Heartbeat error */ + fec->eth->x_cntrl |= 0x00000001; + } + if (ievent & 0x10000000) { + /* Graceful stop complete */ + if (fec->eth->x_cntrl & 0x00000001) { + mpc512x_fec_halt (dev); + fec->eth->x_cntrl &= ~0x00000001; + mpc512x_fec_init (dev, NULL); + } + } + + if (!(pRbd->status & FEC_RBD_EMPTY)) { + if ((pRbd->status & FEC_RBD_LAST) && + !(pRbd->status & FEC_RBD_ERR) && + ((pRbd->dataLength - 4) > 14)) { + + /* + * Get buffer size + */ + frame_length = pRbd->dataLength - 4; + +#if (DEBUG & 0x20) + { + int i; + printf ("recv data hdr:"); + for (i = 0; i < 14; i++) + printf ("%x ", *((uint8*)pRbd->dataPointer + i)); + printf("\n"); + } +#endif + + /* + * Fill the buffer and pass it to upper layers + */ + memcpy (buff, (void*)pRbd->dataPointer, frame_length); + NetReceive ((uchar*)buff, frame_length); + len = frame_length; + } + + /* + * Reset buffer descriptor as empty + */ + mpc512x_fec_rbd_clean (fec, pRbd); + } + + /* Try to fill Buffer Descriptors */ + fec->eth->r_des_active = 0x01000000; /* Descriptor polling active */ + return len; +} + +/********************************************************************/ +int mpc512x_fec_initialize (bd_t * bis) +{ + + immap_t *im = (immap_t*) CFG_IMMR; + mpc512x_fec_priv *fec; + struct eth_device *dev; + int i; + char *tmp, *end, env_enetaddr[6]; + uint32 *reg; + void * bd; + + fec = (mpc512x_fec_priv *) malloc (sizeof(*fec)); + dev = (struct eth_device *) malloc (sizeof(*dev)); + memset (dev, 0, sizeof *dev); + + fec->eth = (ethernet_regs *) MPC512X_FEC; + +# ifndef CONFIG_FEC_10MBIT + fec->xcv_type = MII100; +# else + fec->xcv_type = MII10; +# endif + dev->priv = (void *)fec; + dev->iobase = MPC512X_FEC; + dev->init = mpc512x_fec_init; + dev->halt = mpc512x_fec_halt; + dev->send = mpc512x_fec_send; + dev->recv = mpc512x_fec_recv; + + sprintf (dev->name, "FEC ETHERNET"); + eth_register (dev); + +#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII) + miiphy_register (dev->name, + fec512x_miiphy_read, fec512x_miiphy_write); +#endif + + /* + * Initialize I\O pins + */ + reg = (uint32 *) &(im->io_ctrl.regs[PSC0_0_IDX]); + + for (i = 0; i < 15; i++) + reg[i] = IOCTRL_MUX_FEC | 0x00000001; + + im->io_ctrl.regs[SPDIF_TXCLOCK_IDX] = IOCTRL_MUX_FEC | 0x00000001; + im->io_ctrl.regs[SPDIF_TX_IDX] = IOCTRL_MUX_FEC | 0x00000001; + im->io_ctrl.regs[SPDIF_RX_IDX] = IOCTRL_MUX_FEC | 0x00000001; + + /* Clean up space FEC's MIB and FIFO RAM ...*/ + memset ((void *) MPC512X_FEC + 0x200, 0x00, 0x400); + + /* + * Malloc space for BDs (must be quad word-aligned) + * this pointer is lost, so cannot be freed + */ + bd = malloc (sizeof(mpc512x_buff_descs) + 0x1f); + fec->bdBase = (mpc512x_buff_descs*)((uint32)bd & 0xfffffff0); + memset ((void *) bd, 0x00, sizeof(mpc512x_buff_descs) + 0x1f); + + /* + * Set interrupt mask register + */ + fec->eth->imask = 0x00000000; + + /* + * Clear FEC-Lite interrupt event register(IEVENT) + */ + fec->eth->ievent = 0xffffffff; + + /* + * Try to set the mac address now. The fec mac address is + * a garbage after reset. When not using fec for booting + * the Linux fec driver will try to work with this garbage. + */ + tmp = getenv ("ethaddr"); + if (tmp) { + for (i=0; i<6; i++) { + env_enetaddr[i] = tmp ? simple_strtoul (tmp, &end, 16) : 0; + if (tmp) + tmp = (*end) ? end+1 : end; + } + mpc512x_fec_set_hwaddr (fec, env_enetaddr); + fec->eth->gaddr1 = 0x00000000; + fec->eth->gaddr2 = 0x00000000; + } + + mpc512x_fec_init_phy (dev, bis); + + return 1; +} + +/* MII-interface related functions */ +/********************************************************************/ +int fec512x_miiphy_read (char *devname, uint8 phyAddr, uint8 regAddr, uint16 * retVal) +{ + ethernet_regs *eth = (ethernet_regs *) MPC512X_FEC; + uint32 reg; /* convenient holder for the PHY register */ + uint32 phy; /* convenient holder for the PHY */ + int timeout = 0xffff; + + /* + * reading from any PHY's register is done by properly + * programming the FEC's MII data register. + */ + reg = regAddr << FEC_MII_DATA_RA_SHIFT; + phy = phyAddr << FEC_MII_DATA_PA_SHIFT; + + eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_RD | FEC_MII_DATA_TA | phy | reg); + + /* + * wait for the related interrupt + */ + while ((timeout--) && (!(eth->ievent & 0x00800000))) ; + + if (timeout == 0) { +#if (DEBUG & 0x2) + printf ("Read MDIO failed...\n"); +#endif + return -1; + } + + /* + * clear mii interrupt bit + */ + eth->ievent = 0x00800000; + + /* + * it's now safe to read the PHY's register + */ + *retVal = (uint16) eth->mii_data; + + return 0; +} + +/********************************************************************/ +int fec512x_miiphy_write (char *devname, uint8 phyAddr, uint8 regAddr, uint16 data) +{ + ethernet_regs *eth = (ethernet_regs *) MPC512X_FEC; + uint32 reg; /* convenient holder for the PHY register */ + uint32 phy; /* convenient holder for the PHY */ + int timeout = 0xffff; + + reg = regAddr << FEC_MII_DATA_RA_SHIFT; + phy = phyAddr << FEC_MII_DATA_PA_SHIFT; + + eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_WR | + FEC_MII_DATA_TA | phy | reg | data); + + /* + * wait for the MII interrupt + */ + while ((timeout--) && (!(eth->ievent & 0x00800000))) ; + + if (timeout == 0) { +#if (DEBUG & 0x2) + printf ("Write MDIO failed...\n"); +#endif + return -1; + } + + /* + * clear MII interrupt bit + */ + eth->ievent = 0x00800000; + + return 0; +} + +#if (DEBUG & 0x40) +static uint32 local_crc32 (char *string, unsigned int crc_value, int len) +{ + int i; + char c; + unsigned int crc, count; + + /* + * crc32 algorithm + */ + /* + * crc = 0xffffffff; * The initialized value should be 0xffffffff + */ + crc = crc_value; + + for (i = len; --i >= 0;) { + c = *string++; + for (count = 0; count < 8; count++) { + if ((c & 0x01) ^ (crc & 0x01)) { + crc >>= 1; + crc = crc ^ 0xedb88320; + } else { + crc >>= 1; + } + c >>= 1; + } + } + + /* + * In big endian system, do byte swaping for crc value + */ + /**/ return crc; +} +#endif /* DEBUG */ + +#endif /* CONFIG_MPC512x_FEC */ diff --git a/cpu/mpc512x/fec.h b/cpu/mpc512x/fec.h new file mode 100644 index 00000000000..71459197a51 --- /dev/null +++ b/cpu/mpc512x/fec.h @@ -0,0 +1,224 @@ +/* + * (C) Copyright 2003 - 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Derived from the MPC8xx driver's header file. + */ + +#ifndef __MPC512X_FEC_H +#define __MPC512X_FEC_H + +#include +#include + +typedef unsigned long uint32; +typedef unsigned short uint16; +typedef unsigned char uint8; + +typedef struct ethernet_register_set { + +/* [10:2]addr = 00 */ + +/* Control and status Registers (offset 000-1FF) */ + + volatile uint32 fec_id; /* MBAR_ETH + 0x000 */ + volatile uint32 ievent; /* MBAR_ETH + 0x004 */ + volatile uint32 imask; /* MBAR_ETH + 0x008 */ + + volatile uint32 RES0[1]; /* MBAR_ETH + 0x00C */ + volatile uint32 r_des_active; /* MBAR_ETH + 0x010 */ + volatile uint32 x_des_active; /* MBAR_ETH + 0x014 */ + + volatile uint32 RES1[3]; /* MBAR_ETH + 0x018-020 */ + volatile uint32 ecntrl; /* MBAR_ETH + 0x024 */ + + volatile uint32 RES2[6]; /* MBAR_ETH + 0x028-03C */ + volatile uint32 mii_data; /* MBAR_ETH + 0x040 */ + volatile uint32 mii_speed; /* MBAR_ETH + 0x044 */ + + volatile uint32 RES3[7]; /* MBAR_ETH + 0x048-060 */ + volatile uint32 mib_control; /* MBAR_ETH + 0x064 */ + + volatile uint32 RES4[7]; /* MBAR_ETH + 0x068-80 */ + volatile uint32 r_cntrl; /* MBAR_ETH + 0x084 */ + volatile uint32 r_hash; /* MBAR_ETH + 0x088 */ + + volatile uint32 RES5[14]; /* MBAR_ETH + 0x08c-0C0 */ + volatile uint32 x_cntrl; /* MBAR_ETH + 0x0C4 */ + + volatile uint32 RES6[7]; /* MBAR_ETH + 0x0C8-0E0 */ + volatile uint32 paddr1; /* MBAR_ETH + 0x0E4 */ + volatile uint32 paddr2; /* MBAR_ETH + 0x0E8 */ + volatile uint32 op_pause; /* MBAR_ETH + 0x0EC */ + + volatile uint32 RES7[10]; /* MBAR_ETH + 0x0F0-114 */ + volatile uint32 iaddr1; /* MBAR_ETH + 0x118 */ + volatile uint32 iaddr2; /* MBAR_ETH + 0x11C */ + volatile uint32 gaddr1; /* MBAR_ETH + 0x120 */ + volatile uint32 gaddr2; /* MBAR_ETH + 0x124 */ + + volatile uint32 RES8[6]; /* MBAR_ETH + 0x128-13C */ + volatile uint32 fifo_id; /* MBAR_ETH + 0x140 */ + volatile uint32 x_wmrk; /* MBAR_ETH + 0x144 */ + volatile uint32 RES9[1]; /* MBAR_ETH + 0x148 */ + volatile uint32 r_bound; /* MBAR_ETH + 0x14C */ + volatile uint32 r_fstart; /* MBAR_ETH + 0x150 */ + + volatile uint32 RES10[11]; /* MBAR_ETH + 0x154-17C */ + volatile uint32 r_des_start; /* MBAR_ETH + 0x180 */ + volatile uint32 x_des_start; /* MBAR_ETH + 0x184 */ + volatile uint32 r_buff_size; /* MBAR_ETH + 0x188 */ + volatile uint32 RES11[26]; /* MBAR_ETH + 0x18C-1F0 */ + volatile uint32 dma_control; /* MBAR_ETH + 0x1F4 */ + volatile uint32 RES12[2]; /* MBAR_ETH + 0x1F8-1FC */ + +/* MIB COUNTERS (Offset 200-2FF) */ + + volatile uint32 rmon_t_drop; /* MBAR_ETH + 0x200 */ + volatile uint32 rmon_t_packets; /* MBAR_ETH + 0x204 */ + volatile uint32 rmon_t_bc_pkt; /* MBAR_ETH + 0x208 */ + volatile uint32 rmon_t_mc_pkt; /* MBAR_ETH + 0x20C */ + volatile uint32 rmon_t_crc_align; /* MBAR_ETH + 0x210 */ + volatile uint32 rmon_t_undersize; /* MBAR_ETH + 0x214 */ + volatile uint32 rmon_t_oversize; /* MBAR_ETH + 0x218 */ + volatile uint32 rmon_t_frag; /* MBAR_ETH + 0x21C */ + volatile uint32 rmon_t_jab; /* MBAR_ETH + 0x220 */ + volatile uint32 rmon_t_col; /* MBAR_ETH + 0x224 */ + volatile uint32 rmon_t_p64; /* MBAR_ETH + 0x228 */ + volatile uint32 rmon_t_p65to127; /* MBAR_ETH + 0x22C */ + volatile uint32 rmon_t_p128to255; /* MBAR_ETH + 0x230 */ + volatile uint32 rmon_t_p256to511; /* MBAR_ETH + 0x234 */ + volatile uint32 rmon_t_p512to1023; /* MBAR_ETH + 0x238 */ + volatile uint32 rmon_t_p1024to2047; /* MBAR_ETH + 0x23C */ + volatile uint32 rmon_t_p_gte2048; /* MBAR_ETH + 0x240 */ + volatile uint32 rmon_t_octets; /* MBAR_ETH + 0x244 */ + volatile uint32 ieee_t_drop; /* MBAR_ETH + 0x248 */ + volatile uint32 ieee_t_frame_ok; /* MBAR_ETH + 0x24C */ + volatile uint32 ieee_t_1col; /* MBAR_ETH + 0x250 */ + volatile uint32 ieee_t_mcol; /* MBAR_ETH + 0x254 */ + volatile uint32 ieee_t_def; /* MBAR_ETH + 0x258 */ + volatile uint32 ieee_t_lcol; /* MBAR_ETH + 0x25C */ + volatile uint32 ieee_t_excol; /* MBAR_ETH + 0x260 */ + volatile uint32 ieee_t_macerr; /* MBAR_ETH + 0x264 */ + volatile uint32 ieee_t_cserr; /* MBAR_ETH + 0x268 */ + volatile uint32 ieee_t_sqe; /* MBAR_ETH + 0x26C */ + volatile uint32 t_fdxfc; /* MBAR_ETH + 0x270 */ + volatile uint32 ieee_t_octets_ok; /* MBAR_ETH + 0x274 */ + + volatile uint32 RES13[2]; /* MBAR_ETH + 0x278-27C */ + volatile uint32 rmon_r_drop; /* MBAR_ETH + 0x280 */ + volatile uint32 rmon_r_packets; /* MBAR_ETH + 0x284 */ + volatile uint32 rmon_r_bc_pkt; /* MBAR_ETH + 0x288 */ + volatile uint32 rmon_r_mc_pkt; /* MBAR_ETH + 0x28C */ + volatile uint32 rmon_r_crc_align; /* MBAR_ETH + 0x290 */ + volatile uint32 rmon_r_undersize; /* MBAR_ETH + 0x294 */ + volatile uint32 rmon_r_oversize; /* MBAR_ETH + 0x298 */ + volatile uint32 rmon_r_frag; /* MBAR_ETH + 0x29C */ + volatile uint32 rmon_r_jab; /* MBAR_ETH + 0x2A0 */ + + volatile uint32 rmon_r_resvd_0; /* MBAR_ETH + 0x2A4 */ + + volatile uint32 rmon_r_p64; /* MBAR_ETH + 0x2A8 */ + volatile uint32 rmon_r_p65to127; /* MBAR_ETH + 0x2AC */ + volatile uint32 rmon_r_p128to255; /* MBAR_ETH + 0x2B0 */ + volatile uint32 rmon_r_p256to511; /* MBAR_ETH + 0x2B4 */ + volatile uint32 rmon_r_p512to1023; /* MBAR_ETH + 0x2B8 */ + volatile uint32 rmon_r_p1024to2047; /* MBAR_ETH + 0x2BC */ + volatile uint32 rmon_r_p_gte2048; /* MBAR_ETH + 0x2C0 */ + volatile uint32 rmon_r_octets; /* MBAR_ETH + 0x2C4 */ + volatile uint32 ieee_r_drop; /* MBAR_ETH + 0x2C8 */ + volatile uint32 ieee_r_frame_ok; /* MBAR_ETH + 0x2CC */ + volatile uint32 ieee_r_crc; /* MBAR_ETH + 0x2D0 */ + volatile uint32 ieee_r_align; /* MBAR_ETH + 0x2D4 */ + volatile uint32 r_macerr; /* MBAR_ETH + 0x2D8 */ + volatile uint32 r_fdxfc; /* MBAR_ETH + 0x2DC */ + volatile uint32 ieee_r_octets_ok; /* MBAR_ETH + 0x2E0 */ + + volatile uint32 RES14[6]; /* MBAR_ETH + 0x2E4-2FC */ + + volatile uint32 RES15[64]; /* MBAR_ETH + 0x300-3FF */ +} ethernet_regs; + +/* Receive & Transmit Buffer Descriptor definitions */ +typedef struct BufferDescriptor { + uint16 status; + uint16 dataLength; + uint32 dataPointer; +} FEC_RBD; + +typedef struct { + uint16 status; + uint16 dataLength; + uint32 dataPointer; +} FEC_TBD; + +/* private structure */ +typedef enum { + SEVENWIRE, /* 7-wire */ + MII10, /* MII 10Mbps */ + MII100 /* MII 100Mbps */ +} xceiver_type; + +/* BD Numer definitions */ +#define FEC_TBD_NUM 48 /* The user can adjust this value */ +#define FEC_RBD_NUM 32 /* The user can adjust this value */ + +/* packet size limit */ +#define FEC_MAX_PKT_SIZE 1536 + +typedef struct { + uint8 frame[FEC_MAX_PKT_SIZE]; +} mpc512x_frame; + +typedef struct { + FEC_RBD rbd[FEC_RBD_NUM]; /* RBD ring */ + FEC_TBD tbd[FEC_TBD_NUM]; /* TBD ring */ + mpc512x_frame recv_frames[FEC_RBD_NUM]; /* receive buff */ +} mpc512x_buff_descs; + +typedef struct { + ethernet_regs *eth; + xceiver_type xcv_type; /* transceiver type */ + mpc512x_buff_descs *bdBase; /* BD rings and recv buffer */ + uint16 rbdIndex; /* next receive BD to read */ + uint16 tbdIndex; /* next transmit BD to send */ + uint16 usedTbdIndex; /* next transmit BD to clean */ + uint16 cleanTbdNum; /* the number of available transmit BDs */ +} mpc512x_fec_priv; + +/* RBD bits definitions */ +#define FEC_RBD_EMPTY 0x8000 /* Buffer is empty */ +#define FEC_RBD_WRAP 0x2000 /* Last BD in ring */ +#define FEC_RBD_LAST 0x0800 /* Buffer is last in frame(useless) */ +#define FEC_RBD_MISS 0x0100 /* Miss bit for prom mode */ +#define FEC_RBD_BC 0x0080 /* The received frame is broadcast frame */ +#define FEC_RBD_MC 0x0040 /* The received frame is multicast frame */ +#define FEC_RBD_LG 0x0020 /* Frame length violation */ +#define FEC_RBD_NO 0x0010 /* Nonoctet align frame */ +#define FEC_RBD_SH 0x0008 /* Short frame */ +#define FEC_RBD_CR 0x0004 /* CRC error */ +#define FEC_RBD_OV 0x0002 /* Receive FIFO overrun */ +#define FEC_RBD_TR 0x0001 /* Frame is truncated */ +#define FEC_RBD_ERR (FEC_RBD_LG | FEC_RBD_NO | FEC_RBD_CR | \ + FEC_RBD_OV | FEC_RBD_TR) + +/* TBD bits definitions */ +#define FEC_TBD_READY 0x8000 /* Buffer is ready */ +#define FEC_TBD_WRAP 0x2000 /* Last BD in ring */ +#define FEC_TBD_LAST 0x0800 /* Buffer is last in frame */ +#define FEC_TBD_TC 0x0400 /* Transmit the CRC */ +#define FEC_TBD_ABC 0x0200 /* Append bad CRC */ + +/* MII-related definitios */ +#define FEC_MII_DATA_ST 0x40000000 /* Start of frame delimiter */ +#define FEC_MII_DATA_OP_RD 0x20000000 /* Perform a read operation */ +#define FEC_MII_DATA_OP_WR 0x10000000 /* Perform a write operation */ +#define FEC_MII_DATA_PA_MSK 0x0f800000 /* PHY Address field mask */ +#define FEC_MII_DATA_RA_MSK 0x007c0000 /* PHY Register field mask */ +#define FEC_MII_DATA_TA 0x00020000 /* Turnaround */ +#define FEC_MII_DATA_DATAMSK 0x0000ffff /* PHY data field */ + +#define FEC_MII_DATA_RA_SHIFT 18 /* MII Register address bits */ +#define FEC_MII_DATA_PA_SHIFT 23 /* MII PHY address bits */ + +#endif /* __MPC512X_FEC_H */ diff --git a/cpu/mpc512x/i2c.c b/cpu/mpc512x/i2c.c new file mode 100644 index 00000000000..00e28d6404d --- /dev/null +++ b/cpu/mpc512x/i2c.c @@ -0,0 +1,431 @@ +/* + * (C) Copyright 2003 - 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Based on the MPC5xxx code. + */ + +#include + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_HARD_I2C + +#include +#include + +#define immr ((immap_t *)CFG_IMMR) + +/* by default set I2C bus 0 active */ +static unsigned int bus_num = 0; + +#define I2C_TIMEOUT 100 +#define I2C_RETRIES 3 + +struct mpc512x_i2c_tap { + int scl2tap; + int tap2tap; +}; + +static int mpc_reg_in(volatile u32 *reg); +static void mpc_reg_out(volatile u32 *reg, int val, int mask); +static int wait_for_bb(void); +static int wait_for_pin(int *status); +static int do_address(uchar chip, char rdwr_flag); +static int send_bytes(uchar chip, char *buf, int len); +static int receive_bytes(uchar chip, char *buf, int len); +static int mpc_get_fdr(int); + +static int mpc_reg_in (volatile u32 *reg) +{ + int ret = *reg >> 24; + __asm__ __volatile__ ("eieio"); + return ret; +} + +static void mpc_reg_out (volatile u32 *reg, int val, int mask) +{ + int tmp; + + if (!mask) { + *reg = val << 24; + } else { + tmp = mpc_reg_in (reg); + *reg = ((tmp & ~mask) | (val & mask)) << 24; + } + __asm__ __volatile__ ("eieio"); + + return; +} + +static int wait_for_bb (void) +{ + i2c512x_dev_t *regs = &immr->i2c.dev[bus_num]; + int timeout = I2C_TIMEOUT; + int status; + + status = mpc_reg_in (®s->msr); + + while (timeout-- && (status & I2C_BB)) { + volatile int temp; + mpc_reg_out (®s->mcr, I2C_STA, I2C_STA); + temp = mpc_reg_in (®s->mdr); + mpc_reg_out (®s->mcr, 0, I2C_STA); + mpc_reg_out (®s->mcr, 0, 0); + mpc_reg_out (®s->mcr, I2C_EN, 0); + + udelay (1000); + status = mpc_reg_in (®s->msr); + } + + return (status & I2C_BB); +} + +static int wait_for_pin (int *status) +{ + i2c512x_dev_t *regs = &immr->i2c.dev[bus_num]; + int timeout = I2C_TIMEOUT; + + *status = mpc_reg_in (®s->msr); + + while (timeout-- && !(*status & I2C_IF)) { + udelay (1000); + *status = mpc_reg_in (®s->msr); + } + + if (!(*status & I2C_IF)) { + return -1; + } + + mpc_reg_out (®s->msr, 0, I2C_IF); + + return 0; +} + +static int do_address (uchar chip, char rdwr_flag) +{ + i2c512x_dev_t *regs = &immr->i2c.dev[bus_num]; + int status; + + chip <<= 1; + + if (rdwr_flag) { + chip |= 1; + } + + mpc_reg_out (®s->mcr, I2C_TX, I2C_TX); + mpc_reg_out (®s->mdr, chip, 0); + + if (wait_for_pin (&status)) { + return -2; + } + + if (status & I2C_RXAK) { + return -3; + } + + return 0; +} + +static int send_bytes (uchar chip, char *buf, int len) +{ + i2c512x_dev_t *regs = &immr->i2c.dev[bus_num]; + int wrcount; + int status; + + for (wrcount = 0; wrcount < len; ++wrcount) { + + mpc_reg_out (®s->mdr, buf[wrcount], 0); + + if (wait_for_pin (&status)) { + break; + } + + if (status & I2C_RXAK) { + break; + } + + } + + return !(wrcount == len); +} + +static int receive_bytes (uchar chip, char *buf, int len) +{ + i2c512x_dev_t *regs = &immr->i2c.dev[bus_num]; + int dummy = 1; + int rdcount = 0; + int status; + int i; + + mpc_reg_out (®s->mcr, 0, I2C_TX); + + for (i = 0; i < len; ++i) { + buf[rdcount] = mpc_reg_in (®s->mdr); + + if (dummy) { + dummy = 0; + } else { + rdcount++; + } + + if (wait_for_pin (&status)) { + return -4; + } + } + + mpc_reg_out (®s->mcr, I2C_TXAK, I2C_TXAK); + buf[rdcount++] = mpc_reg_in (®s->mdr); + + if (wait_for_pin (&status)) { + return -5; + } + + mpc_reg_out (®s->mcr, 0, I2C_TXAK); + + return 0; +} + +/**************** I2C API ****************/ + +void i2c_init (int speed, int saddr) +{ + int i; + for(i = 0; i < I2C_BUS_CNT; i++){ + i2c512x_dev_t *regs = &immr->i2c.dev[i]; + mpc_reg_out (®s->mcr, 0, 0); + + /* Set clock */ + mpc_reg_out (®s->mfdr, mpc_get_fdr (speed), 0); + mpc_reg_out (®s->madr, saddr << 1, 0); + + /* Enable module */ + mpc_reg_out (®s->mcr, I2C_EN, I2C_INIT_MASK); + mpc_reg_out (®s->msr, 0, I2C_IF); + } + + /* Disable interrupts */ + immr->i2c.icr = 0; + /* Turn off filters */ + immr->i2c.mifr = 0; + return; +} + +static int mpc_get_fdr (int speed) +{ + static int fdr = -1; + + if (fdr == -1) { + ulong best_speed = 0; + ulong divider; + ulong ipb, scl; + ulong bestmatch = 0xffffffffUL; + int best_i = 0, best_j = 0, i, j; + int SCL_Tap[] = { 9, 10, 12, 15, 5, 6, 7, 8}; + struct mpc512x_i2c_tap scltap[] = { + {4, 1}, + {4, 2}, + {6, 4}, + {6, 8}, + {14, 16}, + {30, 32}, + {62, 64}, + {126, 128} + }; + + ipb = gd->ipb_clk; + for (i = 7; i >= 0; i--) { + for (j = 7; j >= 0; j--) { + scl = 2 * (scltap[j].scl2tap + + (SCL_Tap[i] - 1) * scltap[j].tap2tap + + 2); + if (ipb <= speed*scl) { + if ((speed*scl - ipb) < bestmatch) { + bestmatch = speed*scl - ipb; + best_i = i; + best_j = j; + best_speed = ipb/scl; + } + } + } + } + divider = (best_i & 3) | ((best_i & 4) << 3) | (best_j << 2); + if (gd->flags & GD_FLG_RELOC) { + fdr = divider; + } else { + debug("%ld kHz, \n", best_speed / 1000); + return divider; + } + } + + return fdr; +} + +int i2c_probe (uchar chip) +{ + i2c512x_dev_t *regs = &immr->i2c.dev[bus_num]; + int i; + + for (i = 0; i < I2C_RETRIES; i++) { + mpc_reg_out (®s->mcr, I2C_STA, I2C_STA); + + if (! do_address (chip, 0)) { + mpc_reg_out (®s->mcr, 0, I2C_STA); + udelay (500); + break; + } + + mpc_reg_out (®s->mcr, 0, I2C_STA); + udelay (500); + } + + return (i == I2C_RETRIES); +} + +int i2c_read (uchar chip, uint addr, int alen, uchar *buf, int len) +{ + char xaddr[4]; + i2c512x_dev_t *regs = &immr->i2c.dev[bus_num]; + int ret = -1; + + xaddr[0] = (addr >> 24) & 0xFF; + xaddr[1] = (addr >> 16) & 0xFF; + xaddr[2] = (addr >> 8) & 0xFF; + xaddr[3] = addr & 0xFF; + + if (wait_for_bb ()) { + printf ("i2c_read: bus is busy\n"); + goto Done; + } + + mpc_reg_out (®s->mcr, I2C_STA, I2C_STA); + if (do_address (chip, 0)) { + printf ("i2c_read: failed to address chip\n"); + goto Done; + } + + if (send_bytes (chip, &xaddr[4-alen], alen)) { + printf ("i2c_read: send_bytes failed\n"); + goto Done; + } + + mpc_reg_out (®s->mcr, I2C_RSTA, I2C_RSTA); + if (do_address (chip, 1)) { + printf ("i2c_read: failed to address chip\n"); + goto Done; + } + + if (receive_bytes (chip, (char *)buf, len)) { + printf ("i2c_read: receive_bytes failed\n"); + goto Done; + } + + ret = 0; +Done: + mpc_reg_out (®s->mcr, 0, I2C_STA); + return ret; +} + +int i2c_write (uchar chip, uint addr, int alen, uchar *buf, int len) +{ + char xaddr[4]; + i2c512x_dev_t *regs = &immr->i2c.dev[bus_num]; + int ret = -1; + + xaddr[0] = (addr >> 24) & 0xFF; + xaddr[1] = (addr >> 16) & 0xFF; + xaddr[2] = (addr >> 8) & 0xFF; + xaddr[3] = addr & 0xFF; + + if (wait_for_bb ()) { + printf ("i2c_write: bus is busy\n"); + goto Done; + } + + mpc_reg_out (®s->mcr, I2C_STA, I2C_STA); + if (do_address (chip, 0)) { + printf ("i2c_write: failed to address chip\n"); + goto Done; + } + + if (send_bytes (chip, &xaddr[4-alen], alen)) { + printf ("i2c_write: send_bytes failed\n"); + goto Done; + } + + if (send_bytes (chip, (char *)buf, len)) { + printf ("i2c_write: send_bytes failed\n"); + goto Done; + } + + ret = 0; +Done: + mpc_reg_out (®s->mcr, 0, I2C_STA); + return ret; +} + +uchar i2c_reg_read (uchar chip, uchar reg) +{ + uchar buf; + + i2c_read (chip, reg, 1, &buf, 1); + + return buf; +} + +void i2c_reg_write (uchar chip, uchar reg, uchar val) +{ + i2c_write (chip, reg, 1, &val, 1); + + return; +} + + +int i2c_set_bus_num (unsigned int bus) +{ + if (bus >= I2C_BUS_CNT) { + return -1; + } + bus_num = bus; + + return 0; +} + +unsigned int i2c_get_bus_num (void) +{ + return bus_num; +} + +/* TODO */ +unsigned int i2c_get_bus_speed (void) +{ + return -1; +} + +int i2c_set_bus_speed (unsigned int speed) +{ + if (speed != CFG_I2C_SPEED) + return -1; + + return 0; +} + +#endif /* CONFIG_HARD_I2C */ diff --git a/cpu/mpc512x/interrupts.c b/cpu/mpc512x/interrupts.c new file mode 100644 index 00000000000..8cc241c8998 --- /dev/null +++ b/cpu/mpc512x/interrupts.c @@ -0,0 +1,61 @@ +/* + * (C) Copyright 2000-2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright 2004 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Derived from the MPC83xx code. + */ + +#include + +DECLARE_GLOBAL_DATA_PTR; + +struct irq_action { + interrupt_handler_t *handler; + void *arg; + ulong count; +}; + +int interrupt_init_cpu (unsigned *decrementer_count) +{ + *decrementer_count = get_tbclk () / CFG_HZ; + + return 0; +} + +/* + * Install and free an interrupt handler. + */ +void +irq_install_handler (int irq, interrupt_handler_t * handler, void *arg) +{ +} + +void irq_free_handler (int irq) +{ +} + +void timer_interrupt_cpu (struct pt_regs *regs) +{ + /* nothing to do here */ + return; +} diff --git a/cpu/mpc512x/serial.c b/cpu/mpc512x/serial.c new file mode 100644 index 00000000000..200ff2c4964 --- /dev/null +++ b/cpu/mpc512x/serial.c @@ -0,0 +1,197 @@ +/* + * (C) Copyright 2000 - 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Based ont the MPC5200 PSC driver. + * Adapted for MPC512x by Jan Wrobel + */ + +/* + * Minimal serial functions needed to use one of the PSC ports + * as serial console interface. + */ + +#include + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_PSC_CONSOLE) + +static void fifo_init (volatile psc512x_t *psc) +{ + volatile immap_t *im = (immap_t *) CFG_IMMR; + + /* reset Rx & Tx fifo slice */ + psc->rfcmd = PSC_FIFO_RESET_SLICE; + psc->tfcmd = PSC_FIFO_RESET_SLICE; + + /* disable Tx & Rx FIFO interrupts */ + psc->rfintmask = 0; + psc->tfintmask = 0; + + psc->tfsize = CONSOLE_FIFO_TX_SIZE | (CONSOLE_FIFO_TX_ADDR << 16); + psc->rfsize = CONSOLE_FIFO_RX_SIZE | (CONSOLE_FIFO_RX_ADDR << 16); + + /* enable Tx & Rx FIFO slice */ + psc->rfcmd = PSC_FIFO_ENABLE_SLICE; + psc->tfcmd = PSC_FIFO_ENABLE_SLICE; + + im->fifoc.fifoc_cmd = FIFOC_DISABLE_CLOCK_GATE; + __asm__ volatile ("sync"); +} + +int serial_init(void) +{ + volatile immap_t *im = (immap_t *) CFG_IMMR; + volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE]; + unsigned long baseclk; + int div; + + fifo_init (psc); + + /* set MR register to point to MR1 */ + psc->command = PSC_SEL_MODE_REG_1; + + /* disable Tx/Rx */ + psc->command = PSC_TX_DISABLE | PSC_RX_DISABLE; + + /* choose the prescaler by 16 for the Tx/Rx clock generation */ + psc->psc_clock_select = 0xdd00; + + /* switch to UART mode */ + psc->sicr = 0; + + /* mode register points to mr1 */ + /* configure parity, bit length and so on in mode register 1*/ + psc->mode = PSC_MODE_8_BITS | PSC_MODE_PARNONE; + /* now, mode register points to mr2 */ + psc->mode = PSC_MODE_1_STOPBIT; + + /* calculate dividor for setting PSC CTUR and CTLR registers */ + baseclk = (gd->ipb_clk + 8) / 16; + div = (baseclk + (gd->baudrate / 2)) / gd->baudrate; + + psc->ctur = (div >> 8) & 0xff; + /* set baudrate */ + psc->ctlr = div & 0xff; + + /* disable all interrupts */ + psc->psc_imr = 0; + + /* reset and enable Rx/Tx */ + psc->command = PSC_RST_RX; + psc->command = PSC_RST_TX; + psc->command = PSC_RX_ENABLE | PSC_TX_ENABLE; + + return 0; +} + +void serial_putc (const char c) +{ + volatile immap_t *im = (immap_t *)CFG_IMMR; + volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE]; + + if (c == '\n') + serial_putc ('\r'); + + /* Wait for last character to go. */ + while (!(psc->psc_status & PSC_SR_TXEMP)) + ; + + psc->tfdata_8 = c; +} + +void serial_putc_raw (const char c) +{ + volatile immap_t *im = (immap_t *) CFG_IMMR; + volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE]; + + /* Wait for last character to go. */ + while (!(psc->psc_status & PSC_SR_TXEMP)) + ; + + psc->tfdata_8 = c; +} + + +void serial_puts (const char *s) +{ + while (*s) { + serial_putc (*s++); + } +} + +int serial_getc (void) +{ + volatile immap_t *im = (immap_t *) CFG_IMMR; + volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE]; + + /* Wait for a character to arrive. */ + while (psc->rfstat & PSC_FIFO_EMPTY) + ; + + return psc->rfdata_8; +} + +int serial_tstc (void) +{ + volatile immap_t *im = (immap_t *) CFG_IMMR; + volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE]; + + return !(psc->rfstat & PSC_FIFO_EMPTY); +} + +void serial_setbrg (void) +{ + volatile immap_t *im = (immap_t *) CFG_IMMR; + volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE]; + unsigned long baseclk, div; + + baseclk = (gd->csb_clk + 8) / 16; + div = (baseclk + (gd->baudrate / 2)) / gd->baudrate; + + psc->ctur = (div >> 8) & 0xFF; + psc->ctlr = div & 0xff; /* set baudrate */ +} + +void serial_setrts(int s) +{ + volatile immap_t *im = (immap_t *) CFG_IMMR; + volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE]; + + if (s) { + /* Assert RTS (become LOW) */ + psc->op1 = 0x1; + } + else { + /* Negate RTS (become HIGH) */ + psc->op0 = 0x1; + } +} + +int serial_getcts(void) +{ + volatile immap_t *im = (immap_t *) CFG_IMMR; + volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE]; + + return (psc->ip & 0x1) ? 0 : 1; +} +#endif /* CONFIG_PSC_CONSOLE */ diff --git a/cpu/mpc512x/speed.c b/cpu/mpc512x/speed.c new file mode 100644 index 00000000000..9a31155ed2d --- /dev/null +++ b/cpu/mpc512x/speed.c @@ -0,0 +1,135 @@ +/* + * (C) Copyright 2000-2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2006 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Based on the MPC83xx code. + */ + +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +static int spmf_mult[] = { + 68, 1, 12, 16, + 20, 24, 28, 32, + 36, 40, 44, 48, + 52, 56, 60, 64 +}; + +static int cpmf_mult[][2] = { + {0, 1}, {0, 1}, /* 0 and 1 are not valid */ + {1, 1}, {3, 2}, + {2, 1}, {5, 2}, + {3, 1}, {7, 2}, + {0, 1}, {0, 1}, /* and all above 7 are not valid too */ + {0, 1}, {0, 1}, + {0, 1}, {0, 1}, + {0, 1}, {0, 1} +}; + +static int sys_dividors[][2] = { + {2, 1}, {5, 2}, {3, 1}, {7, 2}, {4, 1}, + {9, 2}, {5, 1}, {7, 1}, {6, 1}, {8, 1}, + {9, 1}, {11, 1}, {10, 1}, {12, 1}, {13, 1}, + {15, 1}, {14, 1}, {16, 1}, {17, 1}, {19, 1}, + {18, 1}, {20, 1}, {21, 1}, {23, 1}, {22, 1}, + {24, 1}, {25, 1}, {27, 1}, {26, 1}, {28, 1}, + {29, 1}, {31, 1}, {30, 1}, {32, 1}, {33, 1} +}; + +int get_clocks (void) +{ + volatile immap_t *im = (immap_t *) CFG_IMMR; + u8 spmf; + u8 cpmf; + u8 sys_div; + u8 ips_div; + u32 ref_clk = CFG_MPC512X_CLKIN; + u32 spll; + u32 sys_clk; + u32 core_clk; + u32 csb_clk; + u32 ips_clk; + + if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) + return -1; + + spmf = (im->clk.spmr & SPMR_SPMF) >> SPMR_SPMF_SHIFT; + spll = ref_clk * spmf_mult[spmf]; + + sys_div = (im->clk.scfr[1] & SCFR2_SYS_DIV) >> SCFR2_SYS_DIV_SHIFT; + sys_clk = (spll * sys_dividors[sys_div][1]) / sys_dividors[sys_div][0]; + + csb_clk = sys_clk / 2; + + cpmf = (im->clk.spmr & SPMR_CPMF) >> SPMR_CPMF_SHIFT; + core_clk = (csb_clk * cpmf_mult[cpmf][0]) / cpmf_mult[cpmf][1]; + + ips_div = (im->clk.scfr[0] & SCFR1_IPS_DIV_MASK) >> SCFR1_IPS_DIV_SHIFT; + if (ips_div != 0) { + ips_clk = csb_clk / ips_div; + } else { + /* in case we cannot get a sane IPS divisor, fail gracefully */ + ips_clk = 0; + } + + gd->ipb_clk = ips_clk; + gd->csb_clk = csb_clk; + gd->cpu_clk = core_clk; + gd->bus_clk = csb_clk; + return 0; + +} + +/******************************************** + * get_bus_freq + * return system bus freq in Hz + *********************************************/ +ulong get_bus_freq (ulong dummy) +{ + return gd->csb_clk; +} + +int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + printf ("Clock configuration:\n"); + printf (" CPU: %4d MHz\n", gd->cpu_clk / 1000000); + printf (" Coherent System Bus: %4d MHz\n", gd->csb_clk / 1000000); + printf (" IPS Bus: %4d MHz\n", gd->ipb_clk / 1000000); + printf (" DDR: %4d MHz\n", 2 * gd->csb_clk / 1000000); + return 0; +} + +U_BOOT_CMD(clocks, 1, 0, do_clocks, + "clocks - print clock configuration\n", + " clocks\n" +); + +int prt_mpc512x_clks (void) +{ + do_clocks (NULL, 0, 0, NULL); + return (0); +} diff --git a/cpu/mpc512x/start.S b/cpu/mpc512x/start.S new file mode 100644 index 00000000000..8b749ac54e9 --- /dev/null +++ b/cpu/mpc512x/start.S @@ -0,0 +1,780 @@ +/* + * Copyright (C) 1998 Dan Malek + * Copyright (C) 1999 Magnus Damm + * Copyright (C) 2000, 2001, 2002, 2007 Wolfgang Denk + * Copyright Freescale Semiconductor, Inc. 2004, 2006. All rights reserved. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Based on the MPC83xx code. + */ + +/* + * U-Boot - Startup Code for MPC512x based Embedded Boards + */ + +#include +#include +#include + +#define CONFIG_521X 1 /* needed for Linux kernel header files*/ + +#include +#include + +#include +#include + +#ifndef CONFIG_IDENT_STRING +#define CONFIG_IDENT_STRING "MPC512X" +#endif + +/* + * Floating Point enable, Machine Check and Recoverable Interr. + */ +#undef MSR_KERNEL +#ifdef DEBUG +#define MSR_KERNEL (MSR_FP|MSR_RI) +#else +#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI) +#endif + +/* Macros for manipulating CSx_START/STOP */ +#define START_REG(start) ((start) >> 16) +#define STOP_REG(start, size) (((start) + (size) - 1) >> 16) + +/* + * Set up GOT: Global Offset Table + * + * Use r14 to access the GOT + */ + START_GOT + GOT_ENTRY(_GOT2_TABLE_) + GOT_ENTRY(_FIXUP_TABLE_) + + GOT_ENTRY(_start) + GOT_ENTRY(_start_of_vectors) + GOT_ENTRY(_end_of_vectors) + GOT_ENTRY(transfer_to_handler) + + GOT_ENTRY(__init_end) + GOT_ENTRY(_end) + GOT_ENTRY(__bss_start) + END_GOT + +/* + * Magic number and version string + */ + .long 0x27051956 /* U-Boot Magic Number */ + .globl version_string +version_string: + .ascii U_BOOT_VERSION + .ascii " (", __DATE__, " - ", __TIME__, ")" + .ascii " ", CONFIG_IDENT_STRING, "\0" + +/* + * Vector Table + */ + .text + . = EXC_OFF_SYS_RESET + + .globl _start + /* Start from here after reset/power on */ +_start: + li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH */ + b boot_cold + + .globl _start_of_vectors +_start_of_vectors: + +/* Machine check */ + STD_EXCEPTION(0x200, MachineCheck, MachineCheckException) + +/* Data Storage exception. */ + STD_EXCEPTION(0x300, DataStorage, UnknownException) + +/* Instruction Storage exception. */ + STD_EXCEPTION(0x400, InstStorage, UnknownException) + +/* External Interrupt exception. */ + STD_EXCEPTION(0x500, ExtInterrupt, UnknownException) + +/* Alignment exception. */ + . = 0x600 +Alignment: + EXCEPTION_PROLOG(SRR0, SRR1) + mfspr r4,DAR + stw r4,_DAR(r21) + mfspr r5,DSISR + stw r5,_DSISR(r21) + addi r3,r1,STACK_FRAME_OVERHEAD + li r20,MSR_KERNEL + rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */ + rlwimi r20,r23,0,25,25 /* copy IP bit from saved MSR */ + lwz r6,GOT(transfer_to_handler) + mtlr r6 + blrl +.L_Alignment: + .long AlignmentException - _start + EXC_OFF_SYS_RESET + .long int_return - _start + EXC_OFF_SYS_RESET + +/* Program check exception */ + . = 0x700 +ProgramCheck: + EXCEPTION_PROLOG(SRR0, SRR1) + addi r3,r1,STACK_FRAME_OVERHEAD + li r20,MSR_KERNEL + rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */ + rlwimi r20,r23,0,25,25 /* copy IP bit from saved MSR */ + lwz r6,GOT(transfer_to_handler) + mtlr r6 + blrl +.L_ProgramCheck: + .long ProgramCheckException - _start + EXC_OFF_SYS_RESET + .long int_return - _start + EXC_OFF_SYS_RESET + +/* Floating Point Unit unavailable exception */ + STD_EXCEPTION(0x800, FPUnavailable, UnknownException) + +/* Decrementer */ + STD_EXCEPTION(0x900, Decrementer, timer_interrupt) + +/* Critical interrupt */ + STD_EXCEPTION(0xa00, Critical, UnknownException) + +/* System Call */ + STD_EXCEPTION(0xc00, SystemCall, UnknownException) + +/* Trace interrupt */ + STD_EXCEPTION(0xd00, Trace, UnknownException) + +/* Performance Monitor interrupt */ + STD_EXCEPTION(0xf00, PerfMon, UnknownException) + +/* Intruction Translation Miss */ + STD_EXCEPTION(0x1000, InstructionTLBMiss, UnknownException) + +/* Data Load Translation Miss */ + STD_EXCEPTION(0x1100, DataLoadTLBMiss, UnknownException) + +/* Data Store Translation Miss */ + STD_EXCEPTION(0x1200, DataStoreTLBMiss, UnknownException) + +/* Instruction Address Breakpoint */ + STD_EXCEPTION(0x1300, InstructionAddrBreakpoint, DebugException) + +/* System Management interrupt */ + STD_EXCEPTION(0x1400, SystemMgmtInterrupt, UnknownException) + + .globl _end_of_vectors +_end_of_vectors: + + . = 0x3000 +boot_cold: + /* Save msr contents */ + mfmsr r5 + + /* Set IMMR area to our preferred location */ + lis r4, CONFIG_DEFAULT_IMMR@h + lis r3, CFG_IMMR@h + ori r3, r3, CFG_IMMR@l + stw r3, IMMRBAR(r4) + mtspr MBAR, r3 /* IMMRBAR is mirrored into the MBAR SPR (311) */ + + /* Initialise the machine */ + bl cpu_early_init + + /* + * Set up Local Access Windows: + * + * 1) Boot/CS0 (boot FLASH) + * 2) On-chip SRAM (initial stack purposes) + */ + + /* Boot CS/CS0 window range */ + lis r3, CFG_IMMR@h + ori r3, r3, CFG_IMMR@l + + lis r4, START_REG(CFG_FLASH_BASE) + ori r4, r4, STOP_REG(CFG_FLASH_BASE, CFG_FLASH_SIZE) + stw r4, LPCS0AW(r3) + + /* + * The SRAM window has a fixed size (256K), so only the start address + * is necessary + */ + lis r4, START_REG(CFG_SRAM_BASE) & 0xff00 + stw r4, SRAMBAR(r3) + + /* + * According to MPC5121e RM, configuring local access windows should + * be followed by a dummy read of the config register that was + * modified last and an isync + */ + lwz r4, SRAMBAR(r3) + isync + + /* + * Set configuration of the Boot/CS0, the SRAM window does not have a + * config register so no params can be set for it + */ + lis r3, (CFG_IMMR + LPC_OFFSET)@h + ori r3, r3, (CFG_IMMR + LPC_OFFSET)@l + + lis r4, CFG_CS0_CFG@h + ori r4, r4, CFG_CS0_CFG@l + stw r4, CS0_CONFIG(r3) + + /* Master enable all CS's */ + lis r4, CS_CTRL_ME@h + ori r4, r4, CS_CTRL_ME@l + stw r4, CS_CTRL(r3) + + lis r4, (CFG_MONITOR_BASE)@h + ori r4, r4, (CFG_MONITOR_BASE)@l + addi r5, r4, in_flash - _start + EXC_OFF_SYS_RESET + mtlr r5 + blr + +in_flash: + lis r1, (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET)@h + ori r1, r1, (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET)@l + + li r0, 0 /* Make room for stack frame header and */ + stwu r0, -4(r1) /* clear final stack frame so that */ + stwu r0, -4(r1) /* stack backtraces terminate cleanly */ + + /* let the C-code set up the rest */ + /* */ + /* Be careful to keep code relocatable & stack humble */ + /*------------------------------------------------------*/ + + GET_GOT /* initialize GOT access */ + + /* r3: IMMR */ + lis r3, CFG_IMMR@h + /* run low-level CPU init code (in Flash) */ + bl cpu_init_f + + /* r3: BOOTFLAG */ + mr r3, r21 + /* run 1st part of board init code (in Flash) */ + bl board_init_f + + /* NOTREACHED - board_init_f() does not return */ + +/* + * This code finishes saving the registers to the exception frame + * and jumps to the appropriate handler for the exception. + * Register r21 is pointer into trap frame, r1 has new stack pointer. + */ + .globl transfer_to_handler +transfer_to_handler: + stw r22,_NIP(r21) + lis r22,MSR_POW@h + andc r23,r23,r22 + stw r23,_MSR(r21) + SAVE_GPR(7, r21) + SAVE_4GPRS(8, r21) + SAVE_8GPRS(12, r21) + SAVE_8GPRS(24, r21) + mflr r23 + andi. r24,r23,0x3f00 /* get vector offset */ + stw r24,TRAP(r21) + li r22,0 + stw r22,RESULT(r21) + lwz r24,0(r23) /* virtual address of handler */ + lwz r23,4(r23) /* where to go when done */ + mtspr SRR0,r24 + mtspr SRR1,r20 + mtlr r23 + SYNC + rfi /* jump to handler, enable MMU */ + +int_return: + mfmsr r28 /* Disable interrupts */ + li r4,0 + ori r4,r4,MSR_EE + andc r28,r28,r4 + SYNC /* Some chip revs need this... */ + mtmsr r28 + SYNC + lwz r2,_CTR(r1) + lwz r0,_LINK(r1) + mtctr r2 + mtlr r0 + lwz r2,_XER(r1) + lwz r0,_CCR(r1) + mtspr XER,r2 + mtcrf 0xFF,r0 + REST_10GPRS(3, r1) + REST_10GPRS(13, r1) + REST_8GPRS(23, r1) + REST_GPR(31, r1) + lwz r2,_NIP(r1) /* Restore environment */ + lwz r0,_MSR(r1) + mtspr SRR0,r2 + mtspr SRR1,r0 + lwz r0,GPR0(r1) + lwz r2,GPR2(r1) + lwz r1,GPR1(r1) + SYNC + rfi + +/* + * This code initialises the machine, it expects original MSR contents to be in r5. + */ +cpu_early_init: + /* Initialize machine status; enable machine check interrupt */ + /*-----------------------------------------------------------*/ + + li r3, MSR_KERNEL /* Set ME and RI flags */ + rlwimi r3, r5, 0, 25, 25 /* preserve IP bit */ +#ifdef DEBUG + rlwimi r3, r5, 0, 21, 22 /* debugger might set SE, BE bits */ +#endif + mtmsr r3 + SYNC + mtspr SRR1, r3 /* Mirror current MSR state in SRR1 */ + + lis r3, CFG_IMMR@h + +#if defined(CONFIG_WATCHDOG) + /* Initialise the watchdog and reset it */ + /*--------------------------------------*/ + lis r4, CFG_WATCHDOG_VALUE + ori r4, r4, (SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR) + stw r4, SWCRR(r3) + + /* reset */ + li r4, 0x556C + sth r4, SWSRR@l(r3) + li r4, 0x0 + ori r4, r4, 0xAA39 + sth r4, SWSRR@l(r3) +#else + /* Disable the watchdog */ + /*----------------------*/ + lwz r4, SWCRR(r3) + /* + * Check to see if it's enabled for disabling: once disabled by s/w + * it's not possible to re-enable it + */ + andi. r4, r4, 0x4 + beq 1f + xor r4, r4, r4 + stw r4, SWCRR(r3) +1: +#endif /* CONFIG_WATCHDOG */ + + /* Initialize the Hardware Implementation-dependent Registers */ + /* HID0 also contains cache control */ + /*------------------------------------------------------*/ + lis r3, CFG_HID0_INIT@h + ori r3, r3, CFG_HID0_INIT@l + SYNC + mtspr HID0, r3 + + lis r3, CFG_HID0_FINAL@h + ori r3, r3, CFG_HID0_FINAL@l + SYNC + mtspr HID0, r3 + + lis r3, CFG_HID2@h + ori r3, r3, CFG_HID2@l + SYNC + mtspr HID2, r3 + sync + blr + + +/* Cache functions. + * + * Note: requires that all cache bits in + * HID0 are in the low half word. + */ + .globl icache_enable +icache_enable: + mfspr r3, HID0 + ori r3, r3, HID0_ICE + lis r4, 0 + ori r4, r4, HID0_ILOCK + andc r3, r3, r4 + ori r4, r3, HID0_ICFI + isync + mtspr HID0, r4 /* sets enable and invalidate, clears lock */ + isync + mtspr HID0, r3 /* clears invalidate */ + blr + + .globl icache_disable +icache_disable: + mfspr r3, HID0 + lis r4, 0 + ori r4, r4, HID0_ICE|HID0_ILOCK + andc r3, r3, r4 + ori r4, r3, HID0_ICFI + isync + mtspr HID0, r4 /* sets invalidate, clears enable and lock*/ + isync + mtspr HID0, r3 /* clears invalidate */ + blr + + .globl icache_status +icache_status: + mfspr r3, HID0 + rlwinm r3, r3, (31 - HID0_ICE_SHIFT + 1), 31, 31 + blr + + .globl dcache_enable +dcache_enable: + mfspr r3, HID0 + li r5, HID0_DCFI|HID0_DLOCK + andc r3, r3, r5 + mtspr HID0, r3 /* no invalidate, unlock */ + ori r3, r3, HID0_DCE + ori r5, r3, HID0_DCFI + mtspr HID0, r5 /* enable + invalidate */ + mtspr HID0, r3 /* enable */ + sync + blr + + .globl dcache_disable +dcache_disable: + mfspr r3, HID0 + lis r4, 0 + ori r4, r4, HID0_DCE|HID0_DLOCK + andc r3, r3, r4 + ori r4, r3, HID0_DCI + sync + mtspr HID0, r4 /* sets invalidate, clears enable and lock */ + sync + mtspr HID0, r3 /* clears invalidate */ + blr + + .globl dcache_status +dcache_status: + mfspr r3, HID0 + rlwinm r3, r3, (31 - HID0_DCE_SHIFT + 1), 31, 31 + blr + + .globl get_pvr +get_pvr: + mfspr r3, PVR + blr + +/*------------------------------------------------------------------------------- */ +/* Function: ppcDcbf */ +/* Description: Data Cache block flush */ +/* Input: r3 = effective address */ +/* Output: none. */ +/*------------------------------------------------------------------------------- */ + .globl ppcDcbf +ppcDcbf: + dcbf r0,r3 + blr + +/*------------------------------------------------------------------------------- */ +/* Function: ppcDcbi */ +/* Description: Data Cache block Invalidate */ +/* Input: r3 = effective address */ +/* Output: none. */ +/*------------------------------------------------------------------------------- */ + .globl ppcDcbi +ppcDcbi: + dcbi r0,r3 + blr + +/*-------------------------------------------------------------------------- + * Function: ppcDcbz + * Description: Data Cache block zero. + * Input: r3 = effective address + * Output: none. + *-------------------------------------------------------------------------- */ + + .globl ppcDcbz +ppcDcbz: + dcbz r0,r3 + blr + + .globl ppcDWstore +ppcDWstore: + lfd 1, 0(r4) + stfd 1, 0(r3) + blr + + .globl ppcDWload +ppcDWload: + lfd 1, 0(r3) + stfd 1, 0(r4) + blr + +/*-------------------------------------------------------------------*/ + +/* + * void relocate_code (addr_sp, gd, addr_moni) + * + * This "function" does not return, instead it continues in RAM + * after relocating the monitor code. + * + * r3 = dest + * r4 = src + * r5 = length in bytes + * r6 = cachelinesize + */ + .globl relocate_code +relocate_code: + mr r1, r3 /* Set new stack pointer */ + mr r9, r4 /* Save copy of Global Data pointer */ + mr r10, r5 /* Save copy of Destination Address */ + + mr r3, r5 /* Destination Address */ + lis r4, CFG_MONITOR_BASE@h /* Source Address */ + ori r4, r4, CFG_MONITOR_BASE@l + lwz r5, GOT(__init_end) + sub r5, r5, r4 + li r6, CFG_CACHELINE_SIZE /* Cache Line Size */ + + /* + * Fix GOT pointer: + * + * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE) + * + Destination Address + * + * Offset: + */ + sub r15, r10, r4 + + /* First our own GOT */ + add r14, r14, r15 + /* then the one used by the C code */ + add r30, r30, r15 + + /* + * Now relocate code + */ + cmplw cr1,r3,r4 + addi r0,r5,3 + srwi. r0,r0,2 + beq cr1,4f /* In place copy is not necessary */ + beq 7f /* Protect against 0 count */ + mtctr r0 + bge cr1,2f + la r8,-4(r4) + la r7,-4(r3) + + /* copy */ +1: lwzu r0,4(r8) + stwu r0,4(r7) + bdnz 1b + + addi r0,r5,3 + srwi. r0,r0,2 + mtctr r0 + la r8,-4(r4) + la r7,-4(r3) + + /* and compare */ +20: lwzu r20,4(r8) + lwzu r21,4(r7) + xor. r22, r20, r21 + bne 30f + bdnz 20b + b 4f + + /* compare failed */ +30: li r3, 0 + blr + +2: slwi r0,r0,2 /* re copy in reverse order ... y do we needed it? */ + add r8,r4,r0 + add r7,r3,r0 +3: lwzu r0,-4(r8) + stwu r0,-4(r7) + bdnz 3b + +/* + * Now flush the cache: note that we must start from a cache aligned + * address. Otherwise we might miss one cache line. + */ +4: cmpwi r6,0 + add r5,r3,r5 + beq 7f /* Always flush prefetch queue in any case */ + subi r0,r6,1 + andc r3,r3,r0 + mr r4,r3 +5: dcbst 0,r4 + add r4,r4,r6 + cmplw r4,r5 + blt 5b + sync /* Wait for all dcbst to complete on bus */ + mr r4,r3 +6: icbi 0,r4 + add r4,r4,r6 + cmplw r4,r5 + blt 6b +7: sync /* Wait for all icbi to complete on bus */ + isync + +/* + * We are done. Do not return, instead branch to second part of board + * initialization, now running from RAM. + */ + addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET + mtlr r0 + blr + +in_ram: + /* + * Relocation Function, r14 point to got2+0x8000 + * + * Adjust got2 pointers, no need to check for 0, this code + * already puts a few entries in the table. + */ + li r0,__got2_entries@sectoff@l + la r3,GOT(_GOT2_TABLE_) + lwz r11,GOT(_GOT2_TABLE_) + mtctr r0 + sub r11,r3,r11 + addi r3,r3,-4 +1: lwzu r0,4(r3) + add r0,r0,r11 + stw r0,0(r3) + bdnz 1b + + /* + * Now adjust the fixups and the pointers to the fixups + * in case we need to move ourselves again. + */ +2: li r0,__fixup_entries@sectoff@l + lwz r3,GOT(_FIXUP_TABLE_) + cmpwi r0,0 + mtctr r0 + addi r3,r3,-4 + beq 4f +3: lwzu r4,4(r3) + lwzux r0,r4,r11 + add r0,r0,r11 + stw r10,0(r3) + stw r0,0(r4) + bdnz 3b +4: +clear_bss: + /* + * Now clear BSS segment + */ + lwz r3,GOT(__bss_start) + lwz r4,GOT(_end) + + cmplw 0, r3, r4 + beq 6f + + li r0, 0 +5: + stw r0, 0(r3) + addi r3, r3, 4 + cmplw 0, r3, r4 + bne 5b +6: + mr r3, r9 /* Global Data pointer */ + mr r4, r10 /* Destination Address */ + bl board_init_r + + /* + * Copy exception vector code to low memory + * + * r3: dest_addr + * r7: source address, r8: end address, r9: target address + */ + .globl trap_init +trap_init: + lwz r7, GOT(_start) + lwz r8, GOT(_end_of_vectors) + + li r9, 0x100 /* reset vector at 0x100 */ + + cmplw 0, r7, r8 + bgelr /* return if r7>=r8 - just in case */ + + mflr r4 /* save link register */ +1: + lwz r0, 0(r7) + stw r0, 0(r9) + addi r7, r7, 4 + addi r9, r9, 4 + cmplw 0, r7, r8 + bne 1b + + /* + * relocate `hdlr' and `int_return' entries + */ + li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET + li r8, Alignment - _start + EXC_OFF_SYS_RESET +2: + bl trap_reloc + addi r7, r7, 0x100 /* next exception vector */ + cmplw 0, r7, r8 + blt 2b + + li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET + bl trap_reloc + + li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET + bl trap_reloc + + li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET + li r8, SystemCall - _start + EXC_OFF_SYS_RESET +3: + bl trap_reloc + addi r7, r7, 0x100 /* next exception vector */ + cmplw 0, r7, r8 + blt 3b + + li r7, .L_Trace - _start + EXC_OFF_SYS_RESET + li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET +4: + bl trap_reloc + addi r7, r7, 0x100 /* next exception vector */ + cmplw 0, r7, r8 + blt 4b + + mfmsr r3 /* now that the vectors have */ + lis r7, MSR_IP@h /* relocated into low memory */ + ori r7, r7, MSR_IP@l /* MSR[IP] can be turned off */ + andc r3, r3, r7 /* (if it was on) */ + SYNC /* Some chip revs need this... */ + mtmsr r3 + SYNC + + mtlr r4 /* restore link register */ + blr + + /* + * Function: relocate entries for one exception vector + */ +trap_reloc: + lwz r0, 0(r7) /* hdlr ... */ + add r0, r0, r3 /* ... += dest_addr */ + stw r0, 0(r7) + + lwz r0, 4(r7) /* int_return ... */ + add r0, r0, r3 /* ... += dest_addr */ + stw r0, 4(r7) + + blr diff --git a/cpu/mpc512x/traps.c b/cpu/mpc512x/traps.c new file mode 100644 index 00000000000..40281a2cbb4 --- /dev/null +++ b/cpu/mpc512x/traps.c @@ -0,0 +1,205 @@ +/* + * (C) Copyright 2000 - 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Derived from the MPC83xx code. + */ + +/* + * This file handles the architecture-dependent parts of hardware + * exceptions + */ + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +extern unsigned long search_exception_table(unsigned long); + +#define END_OF_MEM (gd->bd->bi_memstart + gd->bd->bi_memsize) + +/* + * Trap & Exception support + */ + +void +print_backtrace (unsigned long *sp) +{ + int cnt = 0; + unsigned long i; + + puts ("Call backtrace: "); + while (sp) { + if ((uint)sp > END_OF_MEM) + break; + + i = sp[1]; + if (cnt++ % 7 == 0) + putc ('\n'); + printf ("%08lX ", i); + if (cnt > 32) break; + sp = (unsigned long *) *sp; + } + putc ('\n'); +} + +void show_regs (struct pt_regs * regs) +{ + int i; + + printf ("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n", + regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar); + printf ("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n", + regs->msr, regs->msr & MSR_EE ? 1 : 0, regs->msr & MSR_PR ? 1 : 0, + regs->msr & MSR_FP ? 1 : 0,regs->msr & MSR_ME ? 1 : 0, + regs->msr & MSR_IR ? 1 : 0, + regs->msr & MSR_DR ? 1 : 0); + + putc ('\n'); + for (i = 0; i < 32; i++) { + if ((i % 8) == 0) { + printf ("GPR%02d: ", i); + } + + printf ("%08lX ", regs->gpr[i]); + if ((i % 8) == 7) { + putc ('\n'); + } + } +} + + +void +_exception (int signr, struct pt_regs *regs) +{ + show_regs (regs); + print_backtrace ((unsigned long *)regs->gpr[1]); + panic ("Exception at pc %lx signal %d", regs->nip,signr); +} + + +void +MachineCheckException (struct pt_regs *regs) +{ + unsigned long fixup; + + if ((fixup = search_exception_table (regs->nip)) != 0) { + regs->nip = fixup; + return; + } + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + if (debugger_exception_handler && (*debugger_exception_handler)(regs)) + return; +#endif + + puts ("Machine check.\nCaused by (from msr): "); + printf ("regs %p ",regs); + switch (regs->msr & 0x00FF0000) { + case (0x80000000 >> 10): + puts ("Instruction cache parity signal\n"); + break; + case (0x80000000 >> 11): + puts ("Data cache parity signal\n"); + break; + case (0x80000000 >> 12): + puts ("Machine check signal\n"); + break; + case (0x80000000 >> 13): + puts ("Transfer error ack signal\n"); + break; + case (0x80000000 >> 14): + puts ("Data parity signal\n"); + break; + case (0x80000000 >> 15): + puts ("Address parity signal\n"); + break; + default: + puts ("Unknown values in msr\n"); + } + show_regs (regs); + print_backtrace ((unsigned long *)regs->gpr[1]); + + panic ("machine check"); +} + +void +AlignmentException (struct pt_regs *regs) +{ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + if (debugger_exception_handler && (*debugger_exception_handler)(regs)) + return; +#endif + show_regs (regs); + print_backtrace ((unsigned long *)regs->gpr[1]); + panic ("Alignment Exception"); +} + +void +ProgramCheckException (struct pt_regs *regs) +{ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + if (debugger_exception_handler && (*debugger_exception_handler)(regs)) + return; +#endif + show_regs (regs); + print_backtrace ((unsigned long *)regs->gpr[1]); + panic ("Program Check Exception"); +} + +void +SoftEmuException (struct pt_regs *regs) +{ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + if (debugger_exception_handler && (*debugger_exception_handler)(regs)) + return; +#endif + show_regs (regs); + print_backtrace ((unsigned long *)regs->gpr[1]); + panic ("Software Emulation Exception"); +} + + +void +UnknownException (struct pt_regs *regs) +{ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + if (debugger_exception_handler && (*debugger_exception_handler)(regs)) + return; +#endif + printf ("Bad trap at PC: %lx, SR: %lx, vector=%lx\n", + regs->nip, regs->msr, regs->trap); + _exception (0, regs); +} + +#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG) +extern void do_bedbug_breakpoint (struct pt_regs *); +#endif + +void +DebugException (struct pt_regs *regs) +{ + printf ("Debugger trap at @ %lx\n", regs->nip ); + show_regs (regs); +#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG) + do_bedbug_breakpoint (regs); +#endif +} diff --git a/include/asm-ppc/e300.h b/include/asm-ppc/e300.h index d1bb159aefa..de8239965aa 100644 --- a/include/asm-ppc/e300.h +++ b/include/asm-ppc/e300.h @@ -9,6 +9,7 @@ #define PVR_E300C1 0x80830000 #define PVR_E300C2 0x80840000 #define PVR_E300C3 0x80850000 +#define PVR_E300C4 0x80860000 /* * Hardware Implementation-Dependent Register 0 (HID0) diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h index cd2463643ce..bbaeb3f575f 100644 --- a/include/asm-ppc/global_data.h +++ b/include/asm-ppc/global_data.h @@ -85,6 +85,10 @@ typedef struct global_data { unsigned long ipb_clk; unsigned long pci_clk; #endif +#if defined(CONFIG_MPC512X) + u32 ipb_clk; + u32 csb_clk; +#endif /* CONFIG_MPC512X */ #if defined(CONFIG_MPC8220) unsigned long bExtUart; unsigned long inp_clk; diff --git a/include/asm-ppc/immap_512x.h b/include/asm-ppc/immap_512x.h new file mode 100644 index 00000000000..23d10d4eb41 --- /dev/null +++ b/include/asm-ppc/immap_512x.h @@ -0,0 +1,569 @@ +/* + * (C) Copyright 2007 DENX Software Engineering + * + * MPC512x Internal Memory Map + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Based on the MPC83xx header. + */ + +#ifndef __IMMAP_512x__ +#define __IMMAP_512x__ + +#include + +typedef struct law512x { + u32 bar; /* Base Addr Register */ + u32 ar; /* Attributes Register */ +} law521x_t; + +/* + * System configuration registers + */ +typedef struct sysconf512x { + u32 immrbar; /* Internal memory map base address register */ + u8 res0[0x1c]; + u32 lpbaw; /* LP Boot Access Window */ + u32 lpcs0aw; /* LP CS0 Access Window */ + u32 lpcs1aw; /* LP CS1 Access Window */ + u32 lpcs2aw; /* LP CS2 Access Window */ + u32 lpcs3aw; /* LP CS3 Access Window */ + u32 lpcs4aw; /* LP CS4 Access Window */ + u32 lpcs5aw; /* LP CS5 Access Window */ + u32 lpcs6aw; /* LP CS6 Access Window */ + u32 lpcs7aw; /* LP CS7 Access Window */ + u8 res1[0x1c]; + law521x_t pcilaw[3]; /* PCI Local Access Window 0-2 Registers */ + u8 res2[0x28]; + law521x_t ddrlaw; /* DDR Local Access Window */ + u8 res3[0x18]; + u32 mbxbar; /* MBX Base Address */ + u32 srambar; /* SRAM Base Address */ + u32 nfcbar; /* NFC Base Address */ + u8 res4[0x34]; + u32 spridr; /* System Part and Revision ID Register */ + u32 spcr; /* System Priority Configuration Register */ + u8 res5[0xf8]; +} sysconf512x_t; + +/* + * Watch Dog Timer (WDT) Registers + */ +typedef struct wdt512x { + u8 res0[4]; + u32 swcrr; /* System watchdog control register */ + u32 swcnr; /* System watchdog count register */ + u8 res1[2]; + u16 swsrr; /* System watchdog service register */ + u8 res2[0xF0]; +} wdt512x_t; + +/* + * RTC Module Registers + */ +typedef struct rtclk512x { + u8 fixme[0x100]; +} rtclk512x_t; + +/* + * General Purpose Timer + */ +typedef struct gpt512x { + u8 fixme[0x100]; +} gpt512x_t; + +/* + * Integrated Programmable Interrupt Controller + */ +typedef struct ipic512x { + u8 fixme[0x100]; +} ipic512x_t; + +/* + * System Arbiter Registers + */ +typedef struct arbiter512x { + u32 acr; /* Arbiter Configuration Register */ + u32 atr; /* Arbiter Timers Register */ + u32 ater; /* Arbiter Transfer Error Register */ + u32 aer; /* Arbiter Event Register */ + u32 aidr; /* Arbiter Interrupt Definition Register */ + u32 amr; /* Arbiter Mask Register */ + u32 aeatr; /* Arbiter Event Attributes Register */ + u32 aeadr; /* Arbiter Event Address Register */ + u32 aerr; /* Arbiter Event Response Register */ + u8 res1[0xDC]; +} arbiter512x_t; + +/* + * Reset Module + */ +typedef struct reset512x { + u32 rcwl; /* Reset Configuration Word Low Register */ + u32 rcwh; /* Reset Configuration Word High Register */ + u8 res0[8]; + u32 rsr; /* Reset Status Register */ + u32 rmr; /* Reset Mode Register */ + u32 rpr; /* Reset protection Register */ + u32 rcr; /* Reset Control Register */ + u32 rcer; /* Reset Control Enable Register */ + u8 res1[0xDC]; +} reset512x_t; + +/* + * Clock Module + */ +typedef struct clk512x { + u32 spmr; /* System PLL Mode Register */ + u32 sccr[2]; /* System Clock Control Registers */ + u32 scfr[2]; /* System Clock Frequency Registers */ + u8 res0[4]; + u32 bcr; /* Bread Crumb Register */ + u32 pscccr[12]; /* PSC0-11 Clock Control Registers */ + u32 spccr; /* SPDIF Clock Control Registers */ + u32 cccr; /* CFM Clock Control Registers */ + u32 dccr; /* DIU Clock Control Registers */ + u8 res1[0xa8]; +} clk512x_t; + +/* + * Power Management Control Module + */ +typedef struct pmc512x { + u8 fixme[0x100]; +} pmc512x_t; + +/* + * General purpose I/O module + */ +typedef struct gpio512x { + u8 fixme[0x100]; +} gpio512x_t; + +/* + * DDR Memory Controller Memory Map + */ +typedef struct ddr512x { + u32 ddr_sys_config; /* System Configuration Register */ + u32 ddr_time_config0; /* Timing Configuration Register */ + u32 ddr_time_config1; /* Timing Configuration Register */ + u32 ddr_time_config2; /* Timing Configuration Register */ + u32 ddr_command; /* Command Register */ + u32 ddr_compact_command; /* Compact Command Register */ + u32 self_refresh_cmd_0; /* Enter/Exit Self Refresh Registers */ + u32 self_refresh_cmd_1; /* Enter/Exit Self Refresh Registers */ + u32 self_refresh_cmd_2; /* Enter/Exit Self Refresh Registers */ + u32 self_refresh_cmd_3; /* Enter/Exit Self Refresh Registers */ + u32 self_refresh_cmd_4; /* Enter/Exit Self Refresh Registers */ + u32 self_refresh_cmd_5; /* Enter/Exit Self Refresh Registers */ + u32 self_refresh_cmd_6; /* Enter/Exit Self Refresh Registers */ + u32 self_refresh_cmd_7; /* Enter/Exit Self Refresh Registers */ + u32 DQS_config_offset_count; /* DQS Config Offset Count */ + u32 DQS_config_offset_time; /* DQS Config Offset Time */ + u32 DQS_delay_status; /* DQS Delay Status */ + u32 res0[0xF]; + u32 prioman_config1; /* Priority Manager Configuration */ + u32 prioman_config2; /* Priority Manager Configuration */ + u32 hiprio_config; /* High Priority Configuration */ + u32 lut_table0_main_upper; /* LUT0 Main Upper */ + u32 lut_table1_main_upper; /* LUT1 Main Upper */ + u32 lut_table2_main_upper; /* LUT2 Main Upper */ + u32 lut_table3_main_upper; /* LUT3 Main Upper */ + u32 lut_table4_main_upper; /* LUT4 Main Upper */ + u32 lut_table0_main_lower; /* LUT0 Main Lower */ + u32 lut_table1_main_lower; /* LUT1 Main Lower */ + u32 lut_table2_main_lower; /* LUT2 Main Lower */ + u32 lut_table3_main_lower; /* LUT3 Main Lower */ + u32 lut_table4_main_lower; /* LUT4 Main Lower */ + u32 lut_table0_alternate_upper; /* LUT0 Alternate Upper */ + u32 lut_table1_alternate_upper; /* LUT1 Alternate Upper */ + u32 lut_table2_alternate_upper; /* LUT2 Alternate Upper */ + u32 lut_table3_alternate_upper; /* LUT3 Alternate Upper */ + u32 lut_table4_alternate_upper; /* LUT4 Alternate Upper */ + u32 lut_table0_alternate_lower; /* LUT0 Alternate Lower */ + u32 lut_table1_alternate_lower; /* LUT1 Alternate Lower */ + u32 lut_table2_alternate_lower; /* LUT2 Alternate Lower */ + u32 lut_table3_alternate_lower; /* LUT3 Alternate Lower */ + u32 lut_table4_alternate_lower; /* LUT4 Alternate Lower */ + u32 performance_monitor_config; + u32 event_time_counter; + u32 event_time_preset; + u32 performance_monitor1_address_low; + u32 performance_monitor2_address_low; + u32 performance_monitor1_address_hi; + u32 performance_monitor2_address_hi; + u32 res1[2]; + u32 performance_monitor1_read_counter; + u32 performance_monitor2_read_counter; + u32 performance_monitor1_write_counter; + u32 performance_monitor2_write_counter; + u32 granted_ack_counter0; + u32 granted_ack_counter1; + u32 granted_ack_counter2; + u32 granted_ack_counter3; + u32 granted_ack_counter4; + u32 cumulative_wait_counter0; + u32 cumulative_wait_counter1; + u32 cumulative_wait_counter2; + u32 cumulative_wait_counter3; + u32 cumulative_wait_counter4; + u32 summed_priority_counter0; + u32 summed_priority_counter1; + u32 summed_priority_counter2; + u32 summed_priority_counter3; + u32 summed_priority_counter4; + u32 res2[0x3AD]; +} ddr512x_t; + + +/* + * DMA/Messaging Unit + */ +typedef struct dma512x { + u8 fixme[0x1800]; +} dma512x_t; + +/* + * PCI Software Configuration Registers + */ +typedef struct pciconf512x { + u8 fixme[0x80]; +} pciconf512x_t; + +/* + * Sequencer + */ +typedef struct ios512x { + u8 fixme[0x100]; +} ios512x_t; + +/* + * PCI Controller + */ +typedef struct pcictrl512x { + u8 fixme[0x100]; +} pcictrl512x_t; + + +/* + * MSCAN + */ +typedef struct mscan512x { + u8 fixme[0x100]; +} mscan512x_t; + +/* + * BDLC + */ +typedef struct bdlc512x { + u8 fixme[0x100]; +} bdlc512x_t; + +/* + * SDHC + */ +typedef struct sdhc512x { + u8 fixme[0x100]; +} sdhc512x_t; + +/* + * SPDIF + */ +typedef struct spdif512x { + u8 fixme[0x100]; +} spdif512x_t; + +/* + * I2C + */ +typedef struct i2c512x_dev { + volatile u32 madr; /* I2Cn + 0x00 */ + volatile u32 mfdr; /* I2Cn + 0x04 */ + volatile u32 mcr; /* I2Cn + 0x08 */ + volatile u32 msr; /* I2Cn + 0x0C */ + volatile u32 mdr; /* I2Cn + 0x10 */ + u8 res0[0x0C]; +} i2c512x_dev_t; + +typedef struct i2c512x { + i2c512x_dev_t dev[3]; + volatile u32 icr; + volatile u32 mifr; + u8 res0[0x98]; +} i2c512x_t; + +/* + * AXE + */ +typedef struct axe512x { + u8 fixme[0x100]; +} axe512x_t; + +/* + * DIU + */ +typedef struct diu512x { + u8 fixme[0x100]; +} diu512x_t; + +/* + * CFM + */ +typedef struct cfm512x { + u8 fixme[0x100]; +} cfm512x_t; + +/* + * FEC + */ +typedef struct fec512x { + u8 fixme[0x800]; +} fec512x_t; + +/* + * ULPI + */ +typedef struct ulpi512x { + u8 fixme[0x600]; +} ulpi512x_t; + +/* + * UTMI + */ +typedef struct utmi512x { + u8 fixme[0x3000]; +} utmi512x_t; + +/* + * PCI DMA + */ +typedef struct pcidma512x { + u8 fixme[0x300]; +} pcidma512x_t; + +/* + * IO Control + */ +typedef struct ioctrl512x { + u32 regs[0x400]; +} ioctrl512x_t; + +/* + * IIM + */ +typedef struct iim512x { + u8 fixme[0x1000]; +} iim512x_t; + +/* + * LPC + */ +typedef struct lpc512x { + u32 cs_cfg[8]; /* Chip Select N Configuration Registers + No dedicated entry for CS Boot as == CS0 */ + u32 cs_cr; /* Chip Select Control Register */ + u32 cs_sr; /* Chip Select Status Register */ + u32 cs_bcr; /* Chip Select Burst Control Register */ + u32 cs_dccr; /* Chip Select Deadcycle Control Register */ + u32 cs_hccr; /* Chip Select Holdcycle Control Register */ + u8 res0[0xcc]; + u32 sclpc_psr; /* SCLPC Packet Size Register */ + u32 sclpc_sar; /* SCLPC Start Address Register */ + u32 sclpc_cr; /* SCLPC Control Register */ + u32 sclpc_er; /* SCLPC Enable Register */ + u32 sclpc_nar; /* SCLPC NextAddress Register */ + u32 sclpc_sr; /* SCLPC Status Register */ + u32 sclpc_bdr; /* SCLPC Bytes Done Register */ + u32 emb_scr; /* EMB Share Counter Register */ + u32 emb_pcr; /* EMB Pause Control Register */ + u8 res1[0x1c]; + u32 lpc_fdwr; /* LPC RX/TX FIFO Data Word Register */ + u32 lpc_fsr; /* LPC RX/TX FIFO Status Register */ + u32 lpc_cr; /* LPC RX/TX FIFO Control Register */ + u32 lpc_ar; /* LPC RX/TX FIFO Alarm Register */ + u8 res2[0xb0]; +} lpc512x_t; + +/* + * PATA + */ +typedef struct pata512x { + u8 fixme[0x100]; +} pata512x_t; + +/* + * PSC + */ +typedef struct psc512x { + volatile u8 mode; /* PSC + 0x00 */ + volatile u8 res0[3]; + union { /* PSC + 0x04 */ + volatile u16 status; + volatile u16 clock_select; + } sr_csr; +#define psc_status sr_csr.status +#define psc_clock_select sr_csr.clock_select + volatile u16 res1; + volatile u8 command; /* PSC + 0x08 */ + volatile u8 res2[3]; + union { /* PSC + 0x0c */ + volatile u8 buffer_8; + volatile u16 buffer_16; + volatile u32 buffer_32; + } buffer; +#define psc_buffer_8 buffer.buffer_8 +#define psc_buffer_16 buffer.buffer_16 +#define psc_buffer_32 buffer.buffer_32 + union { /* PSC + 0x10 */ + volatile u8 ipcr; + volatile u8 acr; + } ipcr_acr; +#define psc_ipcr ipcr_acr.ipcr +#define psc_acr ipcr_acr.acr + volatile u8 res3[3]; + union { /* PSC + 0x14 */ + volatile u16 isr; + volatile u16 imr; + } isr_imr; +#define psc_isr isr_imr.isr +#define psc_imr isr_imr.imr + volatile u16 res4; + volatile u8 ctur; /* PSC + 0x18 */ + volatile u8 res5[3]; + volatile u8 ctlr; /* PSC + 0x1c */ + volatile u8 res6[3]; + volatile u32 ccr; /* PSC + 0x20 */ + volatile u8 res7[12]; + volatile u8 ivr; /* PSC + 0x30 */ + volatile u8 res8[3]; + volatile u8 ip; /* PSC + 0x34 */ + volatile u8 res9[3]; + volatile u8 op1; /* PSC + 0x38 */ + volatile u8 res10[3]; + volatile u8 op0; /* PSC + 0x3c */ + volatile u8 res11[3]; + volatile u32 sicr; /* PSC + 0x40 */ + volatile u8 res12[60]; + volatile u32 tfcmd; /* PSC + 0x80 */ + volatile u32 tfalarm; /* PSC + 0x84 */ + volatile u32 tfstat; /* PSC + 0x88 */ + volatile u32 tfintstat; /* PSC + 0x8C */ + volatile u32 tfintmask; /* PSC + 0x90 */ + volatile u32 tfcount; /* PSC + 0x94 */ + volatile u16 tfwptr; /* PSC + 0x98 */ + volatile u16 tfrptr; /* PSC + 0x9A */ + volatile u32 tfsize; /* PSC + 0x9C */ + volatile u8 res13[28]; + union { /* PSC + 0xBC */ + volatile u8 buffer_8; + volatile u16 buffer_16; + volatile u32 buffer_32; + } tfdata_buffer; +#define tfdata_8 tfdata_buffer.buffer_8 +#define tfdata_16 tfdata_buffer.buffer_16 +#define tfdata_32 tfdata_buffer.buffer_32 + + volatile u32 rfcmd; /* PSC + 0xC0 */ + volatile u32 rfalarm; /* PSC + 0xC4 */ + volatile u32 rfstat; /* PSC + 0xC8 */ + volatile u32 rfintstat; /* PSC + 0xCC */ + volatile u32 rfintmask; /* PSC + 0xD0 */ + volatile u32 rfcount; /* PSC + 0xD4 */ + volatile u16 rfwptr; /* PSC + 0xD8 */ + volatile u16 rfrptr; /* PSC + 0xDA */ + volatile u32 rfsize; /* PSC + 0xDC */ + volatile u8 res18[28]; + union { /* PSC + 0xFC */ + volatile u8 buffer_8; + volatile u16 buffer_16; + volatile u32 buffer_32; + } rfdata_buffer; +#define rfdata_8 rfdata_buffer.buffer_8 +#define rfdata_16 rfdata_buffer.buffer_16 +#define rfdata_32 rfdata_buffer.buffer_32 +} psc512x_t; + +/* + * FIFOC + */ +typedef struct fifoc512x { + u32 fifoc_cmd; + u32 fifoc_int; + u32 fifoc_dma; + u32 fifoc_axe; + u32 fifoc_debug; + u8 fixme[0xEC]; +} fifoc512x_t; + +/* + * SATA + */ +typedef struct sata512x { + u8 fixme[0x2000]; +} sata512x_t; + +typedef struct immap { + sysconf512x_t sysconf; /* System configuration */ + u8 res0[0x700]; + wdt512x_t wdt; /* Watch Dog Timer (WDT) */ + rtclk512x_t rtc; /* Real Time Clock Module */ + gpt512x_t gpt; /* General Purpose Timer */ + ipic512x_t ipic; /* Integrated Programmable Interrupt Controller */ + arbiter512x_t arbiter; /* CSB Arbiter */ + reset512x_t reset; /* Reset Module */ + clk512x_t clk; /* Clock Module */ + pmc512x_t pmc; /* Power Management Control Module */ + gpio512x_t gpio; /* General purpose I/O module */ + u8 res1[0x100]; + mscan512x_t mscan; /* MSCAN */ + bdlc512x_t bdlc; /* BDLC */ + sdhc512x_t sdhc; /* SDHC */ + spdif512x_t spdif; /* SPDIF */ + i2c512x_t i2c; /* I2C Controllers */ + u8 res2[0x800]; + axe512x_t axe; /* AXE */ + diu512x_t diu; /* Display Interface Unit */ + cfm512x_t cfm; /* Clock Frequency Measurement */ + u8 res3[0x500]; + fec512x_t fec; /* Fast Ethernet Controller */ + ulpi512x_t ulpi; /* USB ULPI */ + u8 res4[0xa00]; + utmi512x_t utmi; /* USB UTMI */ + u8 res5[0x1000]; + pcidma512x_t pci_dma; /* PCI DMA */ + pciconf512x_t pci_conf; /* PCI Configuration */ + u8 res6[0x80]; + ios512x_t ios; /* PCI Sequencer */ + pcictrl512x_t pci_ctrl; /* PCI Controller Control and Status */ + u8 res7[0xa00]; + ddr512x_t mddrc; /* Multi-port DDR Memory Controller */ + ioctrl512x_t io_ctrl; /* IO Control */ + iim512x_t iim; /* IC Identification module */ + u8 res8[0x4000]; + lpc512x_t lpc; /* LocalPlus Controller */ + pata512x_t pata; /* Parallel ATA */ + u8 res9[0xd00]; + psc512x_t psc[12]; /* PSCs */ + u8 res10[0x300]; + fifoc512x_t fifoc; /* FIFO Controller */ + u8 res11[0x2000]; + dma512x_t dma; /* DMA */ + u8 res12[0xa800]; + sata512x_t sata; /* Serial ATA */ + u8 res13[0xde000]; +} immap_t; +#endif /* __IMMAP_512x__ */ diff --git a/include/common.h b/include/common.h index 23f93907ee4..d823733b67f 100644 --- a/include/common.h +++ b/include/common.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2004 + * (C) Copyright 2000-2007 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this @@ -65,6 +65,9 @@ typedef volatile unsigned char vu_char; #include #elif defined(CONFIG_MPC5xxx) #include +#elif defined(CONFIG_MPC512X) +#include +#include #elif defined(CONFIG_MPC8220) #include #elif defined(CONFIG_8260) @@ -448,6 +451,9 @@ int prt_8260_clks (void); #elif defined(CONFIG_MPC5xxx) int prt_mpc5xxx_clks (void); #endif +#if defined(CONFIG_MPC512x) +int prt_mpc512xxx_clks (void); +#endif #if defined(CONFIG_MPC8220) int prt_mpc8220_clks (void); #endif diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h new file mode 100644 index 00000000000..a1b8eefa02c --- /dev/null +++ b/include/configs/ads5121.h @@ -0,0 +1,410 @@ +/* + * (C) Copyright 2007 DENX Software Engineering + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * ADS5121 board configuration file + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define DEBUG +#undef DEBUG + +/* + * Memory map for the ADS5121 board: + * + * 0x0000_0000 - 0x0FFF_FFFF DDR RAM (256 MB) + * 0x3000_0000 - 0x3001_FFFF SRAM (128 KB) + * 0x8000_0000 - 0x803F_FFFF IMMR (4 MB) + * 0x8200_0000 - 0x8200_001F CPLD (32 B) + * 0xFC00_0000 - 0xFFFF_FFFF NOR Boot FLASH (64 MB) + */ + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 /* E300 Family */ +#define CONFIG_MPC512X 1 /* MPC512X family */ + +#undef CONFIG_PCI + +#define CFG_MPC512X_CLKIN 66000000 /* in Hz */ + +#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f() */ + +#define CFG_IMMR 0x80000000 + +#define CFG_MEMTEST_START 0x00200000 /* memtest region */ +#define CFG_MEMTEST_END 0x00400000 + +/* + * DDR Setup - manually set all parameters as there's no SPD etc. + */ +#define CFG_DDR_SIZE 256 /* MB */ +#define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/ +#define CFG_SDRAM_BASE CFG_DDR_BASE + +/* DDR Controller Configuration + +SYS_CFG: + [31:31] MDDRC Soft Reset: Diabled + [30:30] DRAM CKE pin: Enabled + [29:29] DRAM CLK: Enabled + [28:28] Command Mode: Enabled (For initialization only) + [27:25] DRAM Row Select: dram_row[15:0] = magenta_address[25:10] + [24:21] DRAM Bank Select: dram_bank[1:0] = magenta_address[11:10] + [20:19] Read Test: DON'T USE + [18:18] Self Refresh: Enabled + [17:17] 16bit Mode: Disabled + [16:13] Ready Delay: 2 + [12:12] Half DQS Delay: Disabled + [11:11] Quarter DQS Delay: Disabled + [10:08] Write Delay: 2 + [07:07] Early ODT: Disabled + [06:06] On DIE Termination: Disabled + [05:05] FIFO Overflow Clear: DON'T USE here + [04:04] FIFO Underflow Clear: DON'T USE here + [03:03] FIFO Overflow Pending: DON'T USE here + [02:02] FIFO Underlfow Pending: DON'T USE here + [01:01] FIFO Overlfow Enabled: Enabled + [00:00] FIFO Underflow Enabled: Enabled + TIME_CFG0 + [31:16] DRAM Refresh Time: 0 CSB clocks + [15:8] DRAM Command Time: 0 CSB clocks + [07:00] DRAM Precharge Time: 0 CSB clocks + TIME_CFG1 + [31:26] DRAM tRFC: + [25:21] DRAM tWR1: + [20:17] DRAM tWRT1: + [16:11] DRAM tDRR: + [10:05] DRAM tRC: + [04:00] DRAM tRAS: + TIME_CFG2 + [31:28] DRAM tRCD: + [27:23] DRAM tFAW: + [22:19] DRAM tRTW1: + [18:15] DRAM tCCD: + [14:10] DRAM tRTP: + [09:05] DRAM tRP: + [04:00] DRAM tRPA */ + +#define CFG_MDDRC_SYS_CFG 0xF8604200 +#define CFG_MDDRC_SYS_CFG_RUN 0xE8604200 +#define CFG_MDDRC_SYS_CFG_EN 0x30000000 +#define CFG_MDDRC_TIME_CFG0 0x0000281E +#define CFG_MDDRC_TIME_CFG0_RUN 0x01F4281E +#define CFG_MDDRC_TIME_CFG1 0x54EC1168 +#define CFG_MDDRC_TIME_CFG2 0x35210864 + +#define CFG_MICRON_NOP 0x01380000 +#define CFG_MICRON_PCHG_ALL 0x01100400 +#define CFG_MICRON_MR 0x01000022 +#define CFG_MICRON_EM2 0x01020000 +#define CFG_MICRON_EM3 0x01030000 +#define CFG_MICRON_EN_DLL 0x01010000 +#define CFG_MICRON_RST_DLL 0x01000932 +#define CFG_MICRON_RFSH 0x01080000 +#define CFG_MICRON_INIT_DEV_OP 0x01000832 +#define CFG_MICRON_OCD_DEFAULT 0x01010780 +#define CFG_MICRON_OCD_EXIT 0x01010400 + +/* DDR Priority Manager Configuration */ +#define CFG_MDDRCGRP_PM_CFG1 0x000777AA +#define CFG_MDDRCGRP_PM_CFG2 0x00000055 +#define CFG_MDDRCGRP_HIPRIO_CFG 0x00000000 +#define CFG_MDDRCGRP_LUT0_MU 0x11111117 +#define CFG_MDDRCGRP_LUT0_ML 0x7777777A +#define CFG_MDDRCGRP_LUT1_MU 0x4444EEEE +#define CFG_MDDRCGRP_LUT1_ML 0xEEEEEEEE +#define CFG_MDDRCGRP_LUT2_MU 0x44444444 +#define CFG_MDDRCGRP_LUT2_ML 0x44444444 +#define CFG_MDDRCGRP_LUT3_MU 0x55555555 +#define CFG_MDDRCGRP_LUT3_ML 0x55555558 +#define CFG_MDDRCGRP_LUT4_MU 0x11111111 +#define CFG_MDDRCGRP_LUT4_ML 0x1111117C +#define CFG_MDDRCGRP_LUT0_AU 0x33333377 +#define CFG_MDDRCGRP_LUT0_AL 0x7777EEEE +#define CFG_MDDRCGRP_LUT1_AU 0x11111111 +#define CFG_MDDRCGRP_LUT1_AL 0x11111111 +#define CFG_MDDRCGRP_LUT2_AU 0x11111111 +#define CFG_MDDRCGRP_LUT2_AL 0x11111111 +#define CFG_MDDRCGRP_LUT3_AU 0x11111111 +#define CFG_MDDRCGRP_LUT3_AL 0x11111111 +#define CFG_MDDRCGRP_LUT4_AU 0x11111111 +#define CFG_MDDRCGRP_LUT4_AL 0x11111111 + +/* + * NOR FLASH on the Local Bus + */ +#define CFG_FLASH_CFI /* use the Common Flash Interface */ +#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ +#define CFG_FLASH_BASE 0xFC000000 /* start of FLASH */ +#define CFG_FLASH_SIZE 0x04000000 /* max flash size in bytes */ +#define CFG_FLASH_USE_BUFFER_WRITE + +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ +#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE} +#define CFG_MAX_FLASH_SECT 256 /* max sectors per device */ + +#undef CFG_FLASH_CHECKSUM + +/* + * CPLD registers area is really only 32 bytes in size, but the smallest possible LP + * window is 64KB + */ +#define CFG_CPLD_BASE 0x82000000 +#define CFG_CPLD_SIZE 0x00010000 /* 64 KB */ + +#define CFG_SRAM_BASE 0x30000000 +#define CFG_SRAM_SIZE 0x00020000 /* 128 KB */ + +#define CFG_CS0_CFG 0x05059310 /* ALE active low, data size 4bytes */ +#define CFG_CS2_CFG 0x05059010 /* ALE active low, data size 1byte */ + +/* Use SRAM for initial stack */ +#define CFG_INIT_RAM_ADDR CFG_SRAM_BASE /* Initial RAM address */ +#define CFG_INIT_RAM_END CFG_SRAM_SIZE /* End of used area in RAM */ + +#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_BASE TEXT_BASE /* Start of monitor */ +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#undef CONFIG_SERIAL_SOFTWARE_FIFO + +/* + * Serial console configuration + */ +#define CONFIG_PSC_CONSOLE 3 /* console is on PSC3 */ +#if CONFIG_PSC_CONSOLE != 3 +#error CONFIG_PSC_CONSOLE must be 3 +#endif +#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} + +#define CONSOLE_FIFO_TX_SIZE FIFOC_PSC3_TX_SIZE +#define CONSOLE_FIFO_TX_ADDR FIFOC_PSC3_TX_ADDR +#define CONSOLE_FIFO_RX_SIZE FIFOC_PSC3_RX_SIZE +#define CONSOLE_FIFO_RX_ADDR FIFOC_PSC3_RX_ADDR + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +/* Use the HUSH parser */ +#define CFG_HUSH_PARSER +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +/* I2C */ +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* so disable bit-banged I2C */ +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_CMD_TREE +#define CFG_I2C_SPEED 100000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F +#if 0 +#define CFG_I2C_NOPROBES {{0,0x69}} * Don't probe these addrs */ +#endif + +/* + * Ethernet configuration + */ +#define CONFIG_MPC512x_FEC 1 +#define CONFIG_NET_MULTI +#define CONFIG_PHY_ADDR 0x1 +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_ETHADDR 00:e0:5e:00:e5:14 + +#if 0 +/* + * Configure on-board RTC + */ +#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */ +#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */ +#endif + +/* + * Environment + */ +#define CFG_ENV_IS_IN_FLASH 1 +/* This has to be a multiple of the Flash sector size */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) +#define CFG_ENV_SIZE 0x2000 +#define CFG_ENV_SECT_SIZE 0x40000 /* one sector (256K) for env */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#if defined(CONFIG_PCI) +#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ + | CFG_CMD_PCI \ + | CFG_CMD_NET \ + | CFG_CMD_PING \ + ) +#else +#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ + | CFG_CMD_NET \ + | CFG_CMD_PING \ + | CFG_CMD_MII \ + | CFG_CMD_I2C) +#endif + +#include + +/* + * Watchdog timeout = CFG_WATCHDOG_VALUE * 65536 / IPS clock. + * For example, when IPS is set to 66MHz and CFG_WATCHDOG_VALUE is set + * to 0xFFFF, watchdog timeouts after about 64s. For details refer + * to chapter 36 of the MPC5121e Reference Manual. + */ +#define CONFIG_WATCHDOG /* enable watchdog */ +#define CFG_WATCHDOG_VALUE 0xFFFF + + /* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LOAD_ADDR 0x2000000 /* default load address */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else + #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + + +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ + +/* Cache Configuration */ +#define CFG_DCACHE_SIZE 32768 +#define CFG_CACHELINE_SIZE 32 +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ +#endif + +#define CFG_HID0_INIT 0x000000000 +#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK +#define CFG_HID2 HID2_HBE + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_HOSTNAME ads5121 +#define CONFIG_ROOTPATH /nfsroot/rootfs +#define CONFIG_BOOTFILE uImage + +#define CONFIG_IPADDR 192.168.160.77 +#define CONFIG_SERVERIP 192.168.1.1 +#define CONFIG_GATEWAYIP 192.168.1.1 +#define CONFIG_NETMASK 255.255.0.0 + +#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ + +//#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ +#define CONFIG_BOOTDELAY -1 +#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "load=tftp 100000 /tftpboot/ads5121/u-boot.bin\0" \ + "update=protect off fff00000 fff3ffff; " \ + "era fff00000 fff3ffff; cp.b 100000 fff00000 ${filesize}\0" \ + "upd=run load;run update\0" \ + "" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND "run flash_self" + +#endif /* __CONFIG_H */ diff --git a/include/mpc512x.h b/include/mpc512x.h new file mode 100644 index 00000000000..03e0e9a1473 --- /dev/null +++ b/include/mpc512x.h @@ -0,0 +1,398 @@ +/* + * Copyright (C) 2004-2006 Freescale Semiconductor, Inc. + * (C) Copyright 2007 DENX Software Engineering + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * Derived from the MPC83xx header. + */ + +#ifndef __MPC512X_H__ +#define __MPC512X_H__ + +#include +#if defined(CONFIG_E300) +#include +#endif + +/* System reset offset (PowerPC standard) + */ +#define EXC_OFF_SYS_RESET 0x0100 +#define _START_OFFSET EXC_OFF_SYS_RESET + + +/* IMMRBAR - Internal Memory Register Base Address + */ +#define CONFIG_DEFAULT_IMMR 0xFF400000 /* Default IMMR base address */ +#define IMMRBAR 0x0000 /* Register offset to immr */ +#define IMMRBAR_BASE_ADDR 0xFFF00000 /* Base address mask */ +#define IMMRBAR_RES ~(IMMRBAR_BASE_ADDR) + +/* LAWBAR - Local Access Window Base Address Register + */ +#define LPBAW 0x0020 /* Register offset to immr */ +#define LPCS0AW 0x0024 +#define LPCS1AW 0x0028 +#define LPCS2AW 0x002C +#define LPCS3AW 0x0030 +#define LPCS4AW 0x0034 +#define LPCS5AW 0x0038 +#define LPCS6AW 0x003C +#define LPCA7AW 0x0040 +#define SRAMBAR 0x00C4 + +#define LPC_OFFSET 0x10000 + +#define CS0_CONFIG 0x00000 +#define CS1_CONFIG 0x00004 +#define CS2_CONFIG 0x00008 +#define CS3_CONFIG 0x0000C +#define CS4_CONFIG 0x00010 +#define CS5_CONFIG 0x00014 +#define CS6_CONFIG 0x00018 +#define CS7_CONFIG 0x0001C + +#define CS_CTRL 0x00020 +#define CS_CTRL_ME 0x01000000 /* CS Master Enable bit */ +#define CS_CTRL_IE 0x08000000 /* CS Interrupt Enable bit */ + +/* SPRIDR - System Part and Revision ID Register + */ +#define SPRIDR_PARTID 0xFFFF0000 /* Part Identification */ +#define SPRIDR_REVID 0x0000FFFF /* Revision Identification */ + +#define SPR_5121E 0x80180000 + +/* SPCR - System Priority Configuration Register + */ +#define SPCR_PCIHPE 0x10000000 /* PCI Highest Priority Enable */ +#define SPCR_PCIHPE_SHIFT (31-3) +#define SPCR_PCIPR 0x03000000 /* PCI bridge system bus request priority */ +#define SPCR_PCIPR_SHIFT (31-7) +#define SPCR_TBEN 0x00400000 /* E300 PowerPC core time base unit enable */ +#define SPCR_TBEN_SHIFT (31-9) +#define SPCR_COREPR 0x00300000 /* E300 PowerPC Core system bus request priority */ +#define SPCR_COREPR_SHIFT (31-11) + +/* SWCRR - System Watchdog Control Register + */ +#define SWCRR 0x0904 /* Register offset to immr */ +#define SWCRR_SWTC 0xFFFF0000 /* Software Watchdog Time Count */ +#define SWCRR_SWEN 0x00000004 /* Watchdog Enable bit */ +#define SWCRR_SWRI 0x00000002 /* Software Watchdog Reset/Interrupt Select bit */ +#define SWCRR_SWPR 0x00000001 /* Software Watchdog Counter Prescale bit */ +#define SWCRR_RES ~(SWCRR_SWTC | SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR) + +/* SWCNR - System Watchdog Counter Register + */ +#define SWCNR 0x0908 /* Register offset to immr */ +#define SWCNR_SWCN 0x0000FFFF /* Software Watchdog Count mask */ +#define SWCNR_RES ~(SWCNR_SWCN) + +/* SWSRR - System Watchdog Service Register + */ +#define SWSRR 0x090E /* Register offset to immr */ + +/* ACR - Arbiter Configuration Register + */ +#define ACR_COREDIS 0x10000000 /* Core disable */ +#define ACR_COREDIS_SHIFT (31-7) +#define ACR_PIPE_DEP 0x00070000 /* Pipeline depth */ +#define ACR_PIPE_DEP_SHIFT (31-15) +#define ACR_PCI_RPTCNT 0x00007000 /* PCI repeat count */ +#define ACR_PCI_RPTCNT_SHIFT (31-19) +#define ACR_RPTCNT 0x00000700 /* Repeat count */ +#define ACR_RPTCNT_SHIFT (31-23) +#define ACR_APARK 0x00000030 /* Address parking */ +#define ACR_APARK_SHIFT (31-27) +#define ACR_PARKM 0x0000000F /* Parking master */ +#define ACR_PARKM_SHIFT (31-31) + +/* ATR - Arbiter Timers Register + */ +#define ATR_DTO 0x00FF0000 /* Data time out */ +#define ATR_ATO 0x000000FF /* Address time out */ + +/* AER - Arbiter Event Register + */ +#define AER_ETEA 0x00000020 /* Transfer error */ +#define AER_RES 0x00000010 /* Reserved transfer type */ +#define AER_ECW 0x00000008 /* External control word transfer type */ +#define AER_AO 0x00000004 /* Address Only transfer type */ +#define AER_DTO 0x00000002 /* Data time out */ +#define AER_ATO 0x00000001 /* Address time out */ + +/* AEATR - Arbiter Event Address Register + */ +#define AEATR_EVENT 0x07000000 /* Event type */ +#define AEATR_MSTR_ID 0x001F0000 /* Master Id */ +#define AEATR_TBST 0x00000800 /* Transfer burst */ +#define AEATR_TSIZE 0x00000700 /* Transfer Size */ +#define AEATR_TTYPE 0x0000001F /* Transfer Type */ + +/* RSR - Reset Status Register + */ +#define RSR_SWSR 0x00002000 /* software soft reset */ +#define RSR_SWSR_SHIFT 13 +#define RSR_SWHR 0x00001000 /* software hard reset */ +#define RSR_SWHR_SHIFT 12 +#define RSR_JHRS 0x00000200 /* jtag hreset */ +#define RSR_JHRS_SHIFT 9 +#define RSR_JSRS 0x00000100 /* jtag sreset status */ +#define RSR_JSRS_SHIFT 8 +#define RSR_CSHR 0x00000010 /* checkstop reset status */ +#define RSR_CSHR_SHIFT 4 +#define RSR_SWRS 0x00000008 /* software watchdog reset status */ +#define RSR_SWRS_SHIFT 3 +#define RSR_BMRS 0x00000004 /* bus monitop reset status */ +#define RSR_BMRS_SHIFT 2 +#define RSR_SRS 0x00000002 /* soft reset status */ +#define RSR_SRS_SHIFT 1 +#define RSR_HRS 0x00000001 /* hard reset status */ +#define RSR_HRS_SHIFT 0 +#define RSR_RES ~(RSR_SWSR | RSR_SWHR |\ + RSR_JHRS | RSR_JSRS | RSR_CSHR | RSR_SWRS |\ + RSR_BMRS | RSR_SRS | RSR_HRS) +/* RMR - Reset Mode Register + */ +#define RMR_CSRE 0x00000001 /* checkstop reset enable */ +#define RMR_CSRE_SHIFT 0 +#define RMR_RES ~(RMR_CSRE) + +/* RCR - Reset Control Register + */ +#define RCR_SWHR 0x00000002 /* software hard reset */ +#define RCR_SWSR 0x00000001 /* software soft reset */ +#define RCR_RES ~(RCR_SWHR | RCR_SWSR) + +/* RCER - Reset Control Enable Register + */ +#define RCER_CRE 0x00000001 /* software hard reset */ +#define RCER_RES ~(RCER_CRE) + +/* SPMR - System PLL Mode Register + */ +#define SPMR_SPMF 0x0F000000 +#define SPMR_SPMF_SHIFT 24 +#define SPMR_CPMF 0x000F0000 +#define SPMR_CPMF_SHIFT 16 + +/* SCFR1 System Clock Frequency Register 1 + */ +#define SCFR1_IPS_DIV 0x2 +#define SCFR1_IPS_DIV_MASK 0x03800000 +#define SCFR1_IPS_DIV_SHIFT 23 + +/* SCFR2 System Clock Frequency Register 2 + */ +#define SCFR2_SYS_DIV 0xFC000000 +#define SCFR2_SYS_DIV_SHIFT 26 + +/* SCCR - System Clock Control Registers + */ + +/* System Clock Control Register 1 commands */ +#define CLOCK_SCCR1_CFG_EN 0x80000000 +#define CLOCK_SCCR1_LPC_EN 0x40000000 +#define CLOCK_SCCR1_NFC_EN 0x20000000 +#define CLOCK_SCCR1_PATA_EN 0x10000000 +#define CLOCK_SCCR1_PSC_EN(cn) (0x08000000 >> (cn)) +#define CLOCK_SCCR1_PSCFIFO_EN 0x00008000 +#define CLOCK_SCCR1_SATA_EN 0x00004000 +#define CLOCK_SCCR1_FEC_EN 0x00002000 +#define CLOCK_SCCR1_TPR_EN 0x00001000 +#define CLOCK_SCCR1_PCI_EN 0x00000800 +#define CLOCK_SCCR1_DDR_EN 0x00000400 + +/* System Clock Control Register 2 commands */ +#define CLOCK_SCCR2_DIU_EN 0x80000000 +#define CLOCK_SCCR2_AXE_EN 0x40000000 +#define CLOCK_SCCR2_MEM_EN 0x20000000 +#define CLOCK_SCCR2_USB2_EN 0x10000000 +#define CLOCK_SCCR2_USB1_EN 0x08000000 +#define CLOCK_SCCR2_I2C_EN 0x04000000 +#define CLOCK_SCCR2_BDLC_EN 0x02000000 +#define CLOCK_SCCR2_SDHC_EN 0x01000000 +#define CLOCK_SCCR2_SPDIF_EN 0x00800000 +#define CLOCK_SCCR2_MBX_BUS_EN 0x00400000 +#define CLOCK_SCCR2_MBX_EN 0x00200000 +#define CLOCK_SCCR2_MBX_3D_EN 0x00100000 +#define CLOCK_SCCR2_IIM_EN 0x00080000 + +/* PSC FIFO Command values */ +#define PSC_FIFO_RESET_SLICE 0x80 +#define PSC_FIFO_ENABLE_SLICE 0x01 + +/* PSC FIFO Controller Command values */ +#define FIFOC_ENABLE_CLOCK_GATE 0x01 +#define FIFOC_DISABLE_CLOCK_GATE 0x00 + +/* PSC FIFO status */ +#define PSC_FIFO_EMPTY 0x01 + +/* PSC Command values */ +#define PSC_RX_ENABLE 0x01 +#define PSC_RX_DISABLE 0x02 +#define PSC_TX_ENABLE 0x04 +#define PSC_TX_DISABLE 0x08 +#define PSC_SEL_MODE_REG_1 0x10 +#define PSC_RST_RX 0x20 +#define PSC_RST_TX 0x30 +#define PSC_RST_ERR_STAT 0x40 +#define PSC_RST_BRK_CHG_INT 0x50 +#define PSC_START_BRK 0x60 +#define PSC_STOP_BRK 0x70 + +/* PSC status register bits */ +#define PSC_SR_CDE 0x0080 +#define PSC_SR_TXEMP 0x0800 +#define PSC_SR_OE 0x1000 +#define PSC_SR_PE 0x2000 +#define PSC_SR_FE 0x4000 +#define PSC_SR_RB 0x8000 + +/* PSC mode fields */ +#define PSC_MODE_5_BITS 0x00 +#define PSC_MODE_6_BITS 0x01 +#define PSC_MODE_7_BITS 0x02 +#define PSC_MODE_8_BITS 0x03 +#define PSC_MODE_PAREVEN 0x00 +#define PSC_MODE_PARODD 0x04 +#define PSC_MODE_PARFORCE 0x08 +#define PSC_MODE_PARNONE 0x10 +#define PSC_MODE_ENTIMEOUT 0x20 +#define PSC_MODE_RXRTS 0x80 +#define PSC_MODE_1_STOPBIT 0x07 + +/* + * Centralized FIFO Controller has internal memory for all 12 PSCs FIFOs + * + * NOTE: individual PSC units are free to use whatever area (and size) of the + * FIFOC internal memory, so make sure memory areas for FIFO slices used by + * different PSCs do not overlap! + * + * Overall size of FIFOC memory is not documented in the MPC5121e RM, but + * tests indicate that it is 1024 words total. + */ +#define FIFOC_PSC0_TX_SIZE 0x0 /* number of 4-byte words for FIFO slice */ +#define FIFOC_PSC0_TX_ADDR 0x0 +#define FIFOC_PSC0_RX_SIZE 0x0 +#define FIFOC_PSC0_RX_ADDR 0x0 + +#define FIFOC_PSC1_TX_SIZE 0x0 +#define FIFOC_PSC1_TX_ADDR 0x0 +#define FIFOC_PSC1_RX_SIZE 0x0 +#define FIFOC_PSC1_RX_ADDR 0x0 + +#define FIFOC_PSC2_TX_SIZE 0x0 +#define FIFOC_PSC2_TX_ADDR 0x0 +#define FIFOC_PSC2_RX_SIZE 0x0 +#define FIFOC_PSC2_RX_ADDR 0x0 + +#define FIFOC_PSC3_TX_SIZE 0x04 +#define FIFOC_PSC3_TX_ADDR 0x0 +#define FIFOC_PSC3_RX_SIZE 0x04 +#define FIFOC_PSC3_RX_ADDR 0x10 + +#define FIFOC_PSC4_TX_SIZE 0x0 +#define FIFOC_PSC4_TX_ADDR 0x0 +#define FIFOC_PSC4_RX_SIZE 0x0 +#define FIFOC_PSC4_RX_ADDR 0x0 + +#define FIFOC_PSC5_TX_SIZE 0x0 +#define FIFOC_PSC5_TX_ADDR 0x0 +#define FIFOC_PSC5_RX_SIZE 0x0 +#define FIFOC_PSC5_RX_ADDR 0x0 + +#define FIFOC_PSC6_TX_SIZE 0x0 +#define FIFOC_PSC6_TX_ADDR 0x0 +#define FIFOC_PSC6_RX_SIZE 0x0 +#define FIFOC_PSC6_RX_ADDR 0x0 + +#define FIFOC_PSC7_TX_SIZE 0x0 +#define FIFOC_PSC7_TX_ADDR 0x0 +#define FIFOC_PSC7_RX_SIZE 0x0 +#define FIFOC_PSC7_RX_ADDR 0x0 + +#define FIFOC_PSC8_TX_SIZE 0x0 +#define FIFOC_PSC8_TX_ADDR 0x0 +#define FIFOC_PSC8_RX_SIZE 0x0 +#define FIFOC_PSC8_RX_ADDR 0x0 + +#define FIFOC_PSC9_TX_SIZE 0x0 +#define FIFOC_PSC9_TX_ADDR 0x0 +#define FIFOC_PSC9_RX_SIZE 0x0 +#define FIFOC_PSC9_RX_ADDR 0x0 + +#define FIFOC_PSC10_TX_SIZE 0x0 +#define FIFOC_PSC10_TX_ADDR 0x0 +#define FIFOC_PSC10_RX_SIZE 0x0 +#define FIFOC_PSC10_RX_ADDR 0x0 + +#define FIFOC_PSC11_TX_SIZE 0x0 +#define FIFOC_PSC11_TX_ADDR 0x0 +#define FIFOC_PSC11_RX_SIZE 0x0 +#define FIFOC_PSC11_RX_ADDR 0x0 + +/* IO Control Register + */ + +/* Indexes in regs array */ +#define MEM_IDX 0x00 +#define SPDIF_TXCLOCK_IDX 0x73 +#define SPDIF_TX_IDX 0x74 +#define SPDIF_RX_IDX 0x75 +#define PSC0_0_IDX 0x83 +#define PSC0_1_IDX 0x84 +#define PSC0_2_IDX 0x85 +#define PSC0_3_IDX 0x86 +#define PSC0_4_IDX 0x87 +#define PSC1_0_IDX 0x88 +#define PSC1_1_IDX 0x89 +#define PSC1_2_IDX 0x8a +#define PSC1_3_IDX 0x8b +#define PSC1_4_IDX 0x8c +#define PSC2_0_IDX 0x8d +#define PSC2_1_IDX 0x8e +#define PSC2_2_IDX 0x8f +#define PSC2_3_IDX 0x90 +#define PSC2_4_IDX 0x91 + +#define IOCTRL_FUNCMUX_SHIFT 7 +#define IOCTRL_FUNCMUX_FEC 1 +#define IOCTRL_MUX_FEC (IOCTRL_FUNCMUX_FEC << IOCTRL_FUNCMUX_SHIFT) + +/* Set for DDR */ +#define IOCTRL_MUX_DDR 0x00000036 + + /* Register Offset Base */ +#define MPC512X_FEC (CFG_IMMR + 0x02800) + +/* Number of I2C buses */ +#define I2C_BUS_CNT 3 + +/* I2Cn control register bits */ +#define I2C_EN 0x80 +#define I2C_IEN 0x40 +#define I2C_STA 0x20 +#define I2C_TX 0x10 +#define I2C_TXAK 0x08 +#define I2C_RSTA 0x04 +#define I2C_INIT_MASK (I2C_EN | I2C_STA | I2C_TX | I2C_RSTA) + +/* I2Cn status register bits */ +#define I2C_CF 0x80 +#define I2C_AAS 0x40 +#define I2C_BB 0x20 +#define I2C_AL 0x10 +#define I2C_SRW 0x04 +#define I2C_IF 0x02 +#define I2C_RXAK 0x01 + +#endif /* __MPC512X_H__ */ diff --git a/net/eth.c b/net/eth.c index 9fb3a10edb8..68e2c54b2ea 100644 --- a/net/eth.c +++ b/net/eth.c @@ -40,6 +40,7 @@ extern int eth_3com_initialize(bd_t*); extern int fec_initialize(bd_t*); extern int inca_switch_initialize(bd_t*); extern int mpc5xxx_fec_initialize(bd_t*); +extern int mpc512x_fec_initialize(bd_t*); extern int mpc8220_fec_initialize(bd_t*); extern int mv6436x_eth_initialize(bd_t *); extern int mv6446x_eth_initialize(bd_t *); @@ -168,6 +169,9 @@ int eth_initialize(bd_t *bis) #if defined(CONFIG_MPC5xxx_FEC) mpc5xxx_fec_initialize(bis); #endif +#if defined(CONFIG_MPC512x_FEC) + mpc512x_fec_initialize (bis); +#endif #if defined(CONFIG_MPC8220_FEC) mpc8220_fec_initialize(bis); #endif -- cgit v1.3.1 From cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Thu, 2 Aug 2007 00:48:45 +0200 Subject: Fix build errors and warnings / code cleanup. Signed-off-by: Wolfgang Denk --- MAKEALL | 5 +- Makefile | 74 +++++++------ board/esd/cpci750/sdram_init.c | 2 +- board/freescale/common/pixis.c | 8 +- board/mpc8641hpcn/mpc8641hpcn.c | 3 +- board/mpc8641hpcn/sys_eeprom.c | 16 +-- board/spc1920/hpi.c | 8 ++ cpu/mpc86xx/interrupts.c | 6 +- include/configs/GEN860T.h | 2 +- include/configs/LANTEC.h | 1 + include/configs/MPC8260ADS.h | 5 +- include/configs/MPC8266ADS.h | 1 + include/configs/MPC8313ERDB.h | 2 +- include/configs/RBC823.h | 1 + include/configs/ep8260.h | 1 + include/configs/gw8260.h | 2 +- include/configs/hymod.h | 1 + include/configs/mpc7448hpc2.h | 4 +- include/configs/ppmc7xx.h | 237 ++++++++++++++++++++-------------------- include/configs/sbc8349.h | 2 +- 20 files changed, 202 insertions(+), 179 deletions(-) (limited to 'Makefile') diff --git a/MAKEALL b/MAKEALL index a53500053e9..0721472c0ec 100755 --- a/MAKEALL +++ b/MAKEALL @@ -133,8 +133,9 @@ LIST_8260=" \ ######################################################################### LIST_83xx=" \ - MPC8313ERDB MPC832XEMDS MPC8349EMDS MPC8349ITX \ - MPC8349ITXGP MPC8360EMDS sbc8349 TQM834x \ + MPC8313ERDB_33 MPC8313ERDB_66 MPC832XEMDS MPC8349EMDS \ + MPC8349ITX MPC8349ITXGP MPC8360EMDS sbc8349 \ + TQM834x \ " diff --git a/Makefile b/Makefile index 3b71b21e22e..97dfb9d2ed8 100644 --- a/Makefile +++ b/Makefile @@ -1646,14 +1646,15 @@ r5200_config : unconfig MPC8313ERDB_33_config \ MPC8313ERDB_66_config: unconfig - @echo "" >include/config.h ; \ + @mkdir -p $(obj)include + @echo "" >$(obj)include/config.h ; \ if [ "$(findstring _33_,$@)" ] ; then \ - echo -n "...33M ..." ; \ - echo "#define CFG_33MHZ" >>include/config.h ; \ + echo "...33M ..." ; \ + echo "#define CFG_33MHZ" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _66_,$@)" ] ; then \ - echo -n "...66M..." ; \ - echo "#define CFG_66MHZ" >>include/config.h ; \ + echo "...66M..." ; \ + echo "#define CFG_66MHZ" >>$(obj)include/config.h ; \ fi ; @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb @@ -1661,23 +1662,24 @@ MPC832XEMDS_config \ MPC832XEMDS_HOST_33_config \ MPC832XEMDS_HOST_66_config \ MPC832XEMDS_SLAVE_config: unconfig - @echo "" >include/config.h ; \ + @mkdir -p $(obj)include + @echo "" >$(obj)include/config.h ; \ if [ "$(findstring _HOST_,$@)" ] ; then \ - echo -n "... PCI HOST " ; \ - echo "#define CONFIG_PCI" >>include/config.h ; \ + echo "... PCI HOST " ; \ + echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _SLAVE_,$@)" ] ; then \ echo "...PCI SLAVE 66M" ; \ - echo "#define CONFIG_PCI" >>include/config.h ; \ - echo "#define CONFIG_PCISLAVE" >>include/config.h ; \ + echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ + echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _33_,$@)" ] ; then \ - echo -n "...33M ..." ; \ - echo "#define PCI_33M" >>include/config.h ; \ + echo "...33M ..." ; \ + echo "#define PCI_33M" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _66_,$@)" ] ; then \ - echo -n "...66M..." ; \ - echo "#define PCI_66M" >>include/config.h ; \ + echo "...66M..." ; \ + echo "#define PCI_66M" >>$(obj)include/config.h ; \ fi ; @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds @@ -1702,23 +1704,24 @@ MPC8360EMDS_config \ MPC8360EMDS_HOST_33_config \ MPC8360EMDS_HOST_66_config \ MPC8360EMDS_SLAVE_config: unconfig - @echo "" >include/config.h ; \ + @mkdir -p $(obj)include + @echo "" >$(obj)include/config.h ; \ if [ "$(findstring _HOST_,$@)" ] ; then \ - echo -n "... PCI HOST " ; \ - echo "#define CONFIG_PCI" >>include/config.h ; \ + echo "... PCI HOST " ; \ + echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _SLAVE_,$@)" ] ; then \ echo "...PCI SLAVE 66M" ; \ - echo "#define CONFIG_PCI" >>include/config.h ; \ - echo "#define CONFIG_PCISLAVE" >>include/config.h ; \ + echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ + echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _33_,$@)" ] ; then \ - echo -n "...33M ..." ; \ - echo "#define PCI_33M" >>include/config.h ; \ + echo "...33M ..." ; \ + echo "#define PCI_33M" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _66_,$@)" ] ; then \ - echo -n "...66M..." ; \ - echo "#define PCI_66M" >>include/config.h ; \ + echo "...66M..." ; \ + echo "#define PCI_66M" >>$(obj)include/config.h ; \ fi ; @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds @@ -1744,10 +1747,10 @@ MPC8540EVAL_66_slave_config: unconfig @mkdir -p $(obj)include @echo "" >$(obj)include/config.h ; \ if [ "$(findstring _33_,$@)" ] ; then \ - echo -n "... 33 MHz PCI" ; \ + echo "... 33 MHz PCI" ; \ else \ echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \ - echo -n "... 66 MHz PCI" ; \ + echo "... 66 MHz PCI" ; \ fi ; \ if [ "$(findstring _slave_,$@)" ] ; then \ echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \ @@ -2008,13 +2011,13 @@ omap1610h2_cs3boot_config \ omap1610h2_cs_autoboot_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _cs0boot_, $@)" ] ; then \ - echo "#define CONFIG_CS0_BOOT" >> .$(obj)/include/config.h ; \ + echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \ echo "... configured for CS0 boot"; \ elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \ - echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)./include/config.h ; \ + echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \ echo "... configured for CS_AUTO boot"; \ else \ - echo "#define CONFIG_CS3_BOOT" >> $(obj)./include/config.h ; \ + echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \ echo "... configured for CS3 boot"; \ fi; @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap @@ -2183,11 +2186,12 @@ logodl_config : unconfig pdnb3_config \ scpu_config: unconfig + @mkdir -p $(obj)include @if [ "$(findstring scpu_,$@)" ] ; then \ - echo "#define CONFIG_SCPU" >>include/config.h ; \ + echo "#define CONFIG_SCPU" >>$(obj)include/config.h ; \ echo "... on SCPU board variant" ; \ else \ - >include/config.h ; \ + >$(obj)include/config.h ; \ fi @$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive @@ -2409,13 +2413,15 @@ suzaku_config: unconfig @$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno ml401_config: unconfig - @ >include/config.h - @echo "#define CONFIG_ML401 1" >> include/config.h + @mkdir -p $(obj)include + @ >$(obj)include/config.h + @echo "#define CONFIG_ML401 1" >> $(obj)include/config.h @$(MKCONFIG) -a $(@:_config=) microblaze microblaze ml401 xilinx xupv2p_config: unconfig - @ >include/config.h - @echo "#define CONFIG_XUPV2P 1" >> include/config.h + @mkdir -p $(obj)include + @ >$(obj)include/config.h + @echo "#define CONFIG_XUPV2P 1" >> $(obj)include/config.h @$(MKCONFIG) -a $(@:_config=) microblaze microblaze xupv2p xilinx ######################################################################### diff --git a/board/esd/cpci750/sdram_init.c b/board/esd/cpci750/sdram_init.c index c094755351c..78d18801854 100644 --- a/board/esd/cpci750/sdram_init.c +++ b/board/esd/cpci750/sdram_init.c @@ -1252,7 +1252,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) /* sets up the GT properly with information passed in */ int setup_sdram (AUX_MEM_DIMM_INFO * info) { - ulong tmp, check; + ulong tmp; ulong tmp_sdram_mode = 0; /* 0x141c */ ulong tmp_dunit_control_low = 0; /* 0x1404 */ int i; diff --git a/board/freescale/common/pixis.c b/board/freescale/common/pixis.c index af98157dfd7..99cc2ee197e 100644 --- a/board/freescale/common/pixis.c +++ b/board/freescale/common/pixis.c @@ -321,10 +321,10 @@ static ulong strfractoint(uchar *strptr) mulconst = 1; for (i = 0; i < decarr_len; i++) mulconst *= 10; - decval = simple_strtoul(decarr, NULL, 10); + decval = simple_strtoul((char *)decarr, NULL, 10); } - intval = simple_strtoul(intarr, NULL, 10); + intval = simple_strtoul((char *)intarr, NULL, 10); intval = intval * mulconst; retval = intval + decval; @@ -362,7 +362,7 @@ pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) val = set_px_sysclk(simple_strtoul(argv[2], NULL, 10)); - corepll = strfractoint(argv[3]); + corepll = strfractoint((uchar *)argv[3]); val = val + set_px_corepll(corepll); val = val + set_px_mpxpll(simple_strtoul(argv[4], NULL, 10)); if (val == 3) { @@ -410,7 +410,7 @@ pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) read_from_px_regs(0); read_from_px_regs_altbank(0); val = set_px_sysclk(simple_strtoul(argv[3], NULL, 10)); - corepll = strfractoint(argv[4]); + corepll = strfractoint((uchar *)argv[4]); val = val + set_px_corepll(corepll); val = val + set_px_mpxpll(simple_strtoul(argv[5], NULL, 10)); diff --git a/board/mpc8641hpcn/mpc8641hpcn.c b/board/mpc8641hpcn/mpc8641hpcn.c index 7d7e2afad31..5e02cc5a5e6 100644 --- a/board/mpc8641hpcn/mpc8641hpcn.c +++ b/board/mpc8641hpcn/mpc8641hpcn.c @@ -63,9 +63,10 @@ int checkboard(void) uint devdisr = gur->devdisr; uint io_sel = (gur->pordevsr & MPC86xx_PORDEVSR_IO_SEL) >> 16; +#ifdef DEBUG uint host1_agent = (gur->porbmsr & MPC86xx_PORBMSR_HA) >> 17; uint pex1_agent = (host1_agent == 0) || (host1_agent == 1); - +#endif if ((io_sel == 2 || io_sel == 3 || io_sel == 5 || io_sel == 6 || io_sel == 7 || io_sel == 0xF) && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) { diff --git a/board/mpc8641hpcn/sys_eeprom.c b/board/mpc8641hpcn/sys_eeprom.c index 74e2a3d46ff..7bc663bba46 100644 --- a/board/mpc8641hpcn/sys_eeprom.c +++ b/board/mpc8641hpcn/sys_eeprom.c @@ -68,7 +68,7 @@ int mac_show(void) mac_data.date[5], mac_data.date[6]); for (i = 0; i < 8; i++) { - sprintf(ethaddr[i], + sprintf((char *)ethaddr[i], "%02x:%02x:%02x:%02x:%02x:%02x", mac_data.mac[i][0], mac_data.mac[i][1], @@ -79,10 +79,10 @@ int mac_show(void) printf("MAC %d %s\n", i, ethaddr[i]); } - setenv("ethaddr", ethaddr[0]); - setenv("eth1addr", ethaddr[1]); - setenv("eth2addr", ethaddr[2]); - setenv("eth3addr", ethaddr[3]); + setenv("ethaddr", (char *)ethaddr[0]); + setenv("eth1addr", (char *)ethaddr[1]); + setenv("eth2addr", (char *)ethaddr[2]); + setenv("eth3addr", (char *)ethaddr[3]); return 0; } @@ -236,7 +236,7 @@ int mac_read_from_eeprom(void) } else { for (i = 0; i < 4; i++) { if (memcmp(&mac_data.mac[i], "\0\0\0\0\0\0", 6)) { - sprintf(ethaddr[i], + sprintf((char *)ethaddr[i], "%02x:%02x:%02x:%02x:%02x:%02x", mac_data.mac[i][0], mac_data.mac[i][1], @@ -244,10 +244,10 @@ int mac_read_from_eeprom(void) mac_data.mac[i][3], mac_data.mac[i][4], mac_data.mac[i][5]); - sprintf(enetvar, + sprintf((char *)enetvar, i ? "eth%daddr" : "ethaddr", i); - setenv(enetvar, ethaddr[i]); + setenv((char *)enetvar, (char *)ethaddr[i]); } } } diff --git a/board/spc1920/hpi.c b/board/spc1920/hpi.c index 3c36f7911bc..cd7799b277b 100644 --- a/board/spc1920/hpi.c +++ b/board/spc1920/hpi.c @@ -122,7 +122,9 @@ const uint dsp_table_fast[] = #define TINY_AUTOINC_BASE_ADDR 0x0 static int hpi_activate(void); +#if 0 static void hpi_inactivate(void); +#endif static void dsp_reset(void); static int hpi_write_inc(u32 addr, u32 *data, u32 count); @@ -133,7 +135,9 @@ static u32 hpi_read_noinc(u32 addr); int hpi_test(void); static int hpi_write_addr_test(u32 addr); static int hpi_read_write_test(u32 addr, u32 data); +#ifdef DO_TINY_TEST static int hpi_tiny_autoinc_test(void); +#endif /* DO_TINY_TEST */ #endif /* CONFIG_SPC1920_HPI_TEST */ @@ -185,6 +189,7 @@ static int hpi_activate(void) return 0; } +#if 0 /* turn off the host port interface */ static void hpi_inactivate(void) { @@ -200,6 +205,7 @@ static void hpi_inactivate(void) /* currently always on TBD */ } +#endif /* reset the DSP */ static void dsp_reset(void) @@ -570,6 +576,7 @@ static int hpi_read_write_test(u32 addr, u32 data) return 0; } +#ifdef DO_TINY_TEST static int hpi_tiny_autoinc_test(void) { int i; @@ -599,5 +606,6 @@ static int hpi_tiny_autoinc_test(void) } return 0; } +#endif /* DO_TINY_TEST */ #endif /* CONFIG_SPC1920_HPI_TEST */ diff --git a/cpu/mpc86xx/interrupts.c b/cpu/mpc86xx/interrupts.c index 49820bbd811..08e0675fee4 100644 --- a/cpu/mpc86xx/interrupts.c +++ b/cpu/mpc86xx/interrupts.c @@ -71,7 +71,7 @@ static __inline__ void set_dec(unsigned long val) } /* interrupt is not supported yet */ -int interrupt_init_cpu(unsigned *decrementer_count) +int interrupt_init_cpu(unsigned long *decrementer_count) { return 0; } @@ -107,7 +107,7 @@ int interrupt_init(void) return ret; decrementer_count = get_tbclk() / CFG_HZ; - debug("interrupt init: tbclk() = %d MHz, decrementer_count = %d\n", + debug("interrupt init: tbclk() = %d MHz, decrementer_count = %ld\n", (get_tbclk() / 1000000), decrementer_count); @@ -158,7 +158,7 @@ void timer_interrupt(struct pt_regs *regs) timestamp++; - ppcDcbf(×tamp); + ppcDcbf((unsigned long)×tamp); /* Restore Decrementer Count */ set_dec(decrementer_count); diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h index d88124a3b42..bfbf3a839cf 100644 --- a/include/configs/GEN860T.h +++ b/include/configs/GEN860T.h @@ -248,7 +248,7 @@ #endif #ifdef CONFIG_POST -u #define CONFIG_CMD_DIAG +#define CONFIG_CMD_DIAG #endif /* diff --git a/include/configs/LANTEC.h b/include/configs/LANTEC.h index 2191c7b99c1..46edd08a91f 100644 --- a/include/configs/LANTEC.h +++ b/include/configs/LANTEC.h @@ -106,6 +106,7 @@ #undef CONFIG_CMD_IRQ #undef CONFIG_CMD_JFFS2 #undef CONFIG_CMD_KGDB +#undef CONFIG_CMD_MFSL #undef CONFIG_CMD_MII #undef CONFIG_CMD_MMC #undef CONFIG_CMD_NAND diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h index f3e5330c779..713518d0da2 100644 --- a/include/configs/MPC8260ADS.h +++ b/include/configs/MPC8260ADS.h @@ -227,6 +227,7 @@ #undef CONFIG_CMD_HWFLOW #undef CONFIG_CMD_IDE #undef CONFIG_CMD_KGDB +#undef CONFIG_CMD_MFSL #undef CONFIG_CMD_MMC #undef CONFIG_CMD_NAND #undef CONFIG_CMD_PCMCIA @@ -405,9 +406,9 @@ #define CFG_BCR 0x100C0000 #define CFG_SIUMCR 0x0A200000 #define CFG_SCCR SCCR_DFBRG01 -#define CFG_BR0_PRELIM CFG_FLASH_BASE | 0x00001801 +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | 0x00001801) #define CFG_OR0_PRELIM 0xFF800876 -#define CFG_BR1_PRELIM CFG_BCSR | 0x00001801 +#define CFG_BR1_PRELIM (CFG_BCSR | 0x00001801) #define CFG_OR1_PRELIM 0xFFFF8010 /*We need to configure chip select to use CPLD PCI IC on MPC8272ADS*/ diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h index 3a6c977a606..14b041e3aec 100644 --- a/include/configs/MPC8266ADS.h +++ b/include/configs/MPC8266ADS.h @@ -165,6 +165,7 @@ #undef CONFIG_CMD_IDE #undef CONFIG_CMD_JFFS2 #undef CONFIG_CMD_KGDB +#undef CONFIG_CMD_MFSL #undef CONFIG_CMD_MMC #undef CONFIG_CMD_NAND #undef CONFIG_CMD_PCMCIA diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 45a7d81792d..81db96f4661 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -265,7 +265,7 @@ #define CONFIG_I2C_CMD_TREE #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F -#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */ #define CFG_I2C_OFFSET 0x3000 #define CFG_I2C2_OFFSET 0x3100 diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h index 5e12dabecf7..2f6de815514 100644 --- a/include/configs/RBC823.h +++ b/include/configs/RBC823.h @@ -119,6 +119,7 @@ #undef CONFIG_CMD_IRQ #undef CONFIG_CMD_JFFS2 #undef CONFIG_CMD_MII +#undef CONFIG_CMD_MFSL #undef CONFIG_CMD_MMC #undef CONFIG_CMD_NAND #undef CONFIG_CMD_PCI diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h index f412ec8ed80..025c24960d2 100644 --- a/include/configs/ep8260.h +++ b/include/configs/ep8260.h @@ -321,6 +321,7 @@ #undef CONFIG_CMD_JFFS2 #undef CONFIG_CMD_KGDB #undef CONFIG_CMD_MII +#undef CONFIG_CMD_MFSL #undef CONFIG_CMD_MMC #undef CONFIG_CMD_NAND #undef CONFIG_CMD_PCI diff --git a/include/configs/gw8260.h b/include/configs/gw8260.h index 79e6aa1ba6c..ff5724082d0 100644 --- a/include/configs/gw8260.h +++ b/include/configs/gw8260.h @@ -294,7 +294,7 @@ #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_BOOTFILESIZE -#definef CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS /* undef this to save memory */ #define CFG_LONGHELP diff --git a/include/configs/hymod.h b/include/configs/hymod.h index b789067f81d..2f64ec238c6 100644 --- a/include/configs/hymod.h +++ b/include/configs/hymod.h @@ -199,6 +199,7 @@ #undef CONFIG_CMD_IDE #undef CONFIG_CMD_JFFS2 #undef CONFIG_CMD_NAND +#undef CONFIG_CMD_MFSL #undef CONFIG_CMD_MMC #undef CONFIG_CMD_PCMCIA #undef CONFIG_CMD_PCI diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h index 4237228bebe..f4f33f3e089 100644 --- a/include/configs/mpc7448hpc2.h +++ b/include/configs/mpc7448hpc2.h @@ -375,9 +375,9 @@ /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_BANKS 1/* Flash can be at one of two addresses */ +#define CFG_MAX_FLASH_BANKS 1 /* Flash can be at one of two addresses */ #define FLASH_BANK_SIZE 0x01000000 /* 16 MB Total */ -#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE2} +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, /* CFG_FLASH_BASE2 */ } #define CFG_FLASH_CFI_DRIVER #define CFG_FLASH_CFI diff --git a/include/configs/ppmc7xx.h b/include/configs/ppmc7xx.h index 6e451d8b6cb..fe7de7bed0f 100644 --- a/include/configs/ppmc7xx.h +++ b/include/configs/ppmc7xx.h @@ -25,29 +25,30 @@ /* * Debug * - * DEBUG - Define this is you want extra debug info - * GTREGREAD - Required to build with debug - * do_bdinfo - Required to build with debug + * DEBUG - Define this is you want extra debug info + * GTREGREAD - Required to build with debug + * do_bdinfo - Required to build with debug */ #undef DEBUG -#define GTREGREAD(x) 0xFFFFFFFF +#ifdef DEBUG +#define GTREGREAD(x) 0xFFFFFFFF #define do_bdinfo(a,b,c,d) - +#endif /* * CPU type * - * CONFIG_7xx - We have a 750 or 755 CPU - * CONFIG_74xx - We have a 7400 CPU - * CONFIG_ALTIVEC - We have altivec enabled CPU (only 7400) - * CONFIG_BUS_CLK - System bus clock in Hz + * CONFIG_7xx - We have a 750 or 755 CPU + * CONFIG_74xx - We have a 7400 CPU + * CONFIG_ALTIVEC - We have altivec enabled CPU (only 7400) + * CONFIG_BUS_CLK - System bus clock in Hz */ #define CONFIG_7xx #undef CONFIG_74xx #undef CONFIG_ALTIVEC -#define CONFIG_BUS_CLK 66000000 +#define CONFIG_BUS_CLK 66000000 /* @@ -97,18 +98,18 @@ * Serial configuration * * CONFIG_CONS_INDEX - Serial console port number (COM1) - * CONFIG_BAUDRATE - Serial speed + * CONFIG_BAUDRATE - Serial speed */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 9600 +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 9600 /* * PCI config * - * CONFIG_PCI - Enable PCI bus - * CONFIG_PCI_PNP - Enable Plug & Play support + * CONFIG_PCI - Enable PCI bus + * CONFIG_PCI_PNP - Enable Plug & Play support * CONFIG_PCI_SCAN_SHOW - Enable display of devices at startup */ @@ -120,9 +121,9 @@ /* * Network config * - * CONFIG_NET_MULTI - Support for multiple network interfaces - * CONFIG_EEPRO100 - Intel 8255x Ethernet Controller - * CONFIG_EEPRO100_SROM_WRITE - Enable writing to network card ROM + * CONFIG_NET_MULTI - Support for multiple network interfaces + * CONFIG_EEPRO100 - Intel 8255x Ethernet Controller + * CONFIG_EEPRO100_SROM_WRITE - Enable writing to network card ROM */ #define CONFIG_NET_MULTI @@ -145,7 +146,7 @@ * Boot config * * CONFIG_BOOTCOMMAND - Command(s) to execute to auto-boot - * CONFIG_BOOTDELAY - How long to wait before auto-boot (in sec) + * CONFIG_BOOTDELAY - How long to wait before auto-boot (in sec) */ #define CONFIG_BOOTCOMMAND \ @@ -169,79 +170,79 @@ * * This board runs in a standard CHRP (Map-B) configuration. * - * Type Start End Size Width Chip Sel + * Type Start End Size Width Chip Sel * ----------- ----------- ----------- ------- ------- -------- - * SDRAM 0x00000000 0x04000000 64MB 64b SDRAMCS0 - * User LED's 0x78000000 RCS3 - * UART 0x7C000000 RCS2 - * Mailbox 0xFF000000 RCS1 - * Flash 0xFFC00000 0xFFFFFFFF 4MB 64b RCS0 + * SDRAM 0x00000000 0x04000000 64MB 64b SDRAMCS0 + * User LED's 0x78000000 RCS3 + * UART 0x7C000000 RCS2 + * Mailbox 0xFF000000 RCS1 + * Flash 0xFFC00000 0xFFFFFFFF 4MB 64b RCS0 * * Flash sectors are laid out as follows. * - * Sector Start End Size Comments + * Sector Start End Size Comments * ------- ----------- ----------- ------- ----------- - * 0 0xFFC00000 0xFFC3FFFF 256KB - * 1 0xFFC40000 0xFFC7FFFF 256KB - * 2 0xFFC80000 0xFFCBFFFF 256KB - * 3 0xFFCC0000 0xFFCFFFFF 256KB - * 4 0xFFD00000 0xFFD3FFFF 256KB - * 5 0xFFD40000 0xFFD7FFFF 256KB - * 6 0xFFD80000 0xFFDBFFFF 256KB - * 7 0xFFDC0000 0xFFDFFFFF 256KB - * 8 0xFFE00000 0xFFE3FFFF 256KB - * 9 0xFFE40000 0xFFE7FFFF 256KB - * 10 0xFFE80000 0xFFEBFFFF 256KB - * 11 0xFFEC0000 0xFFEFFFFF 256KB - * 12 0xFFF00000 0xFFF3FFFF 256KB U-Boot code here - * 13 0xFFF40000 0xFFF7FFFF 256KB - * 14 0xFFF80000 0xFFFBFFFF 256KB - * 15 0xFFFC0000 0xFFFDFFFF 128KB - * 16 0xFFFE0000 0xFFFE7FFF 32KB U-Boot env vars here - * 17 0xFFFE8000 0xFFFEFFFF 32KB U-Boot backup copy of env vars here - * 18 0xFFFF0000 0xFFFFFFFF 64KB + * 0 0xFFC00000 0xFFC3FFFF 256KB + * 1 0xFFC40000 0xFFC7FFFF 256KB + * 2 0xFFC80000 0xFFCBFFFF 256KB + * 3 0xFFCC0000 0xFFCFFFFF 256KB + * 4 0xFFD00000 0xFFD3FFFF 256KB + * 5 0xFFD40000 0xFFD7FFFF 256KB + * 6 0xFFD80000 0xFFDBFFFF 256KB + * 7 0xFFDC0000 0xFFDFFFFF 256KB + * 8 0xFFE00000 0xFFE3FFFF 256KB + * 9 0xFFE40000 0xFFE7FFFF 256KB + * 10 0xFFE80000 0xFFEBFFFF 256KB + * 11 0xFFEC0000 0xFFEFFFFF 256KB + * 12 0xFFF00000 0xFFF3FFFF 256KB U-Boot code here + * 13 0xFFF40000 0xFFF7FFFF 256KB + * 14 0xFFF80000 0xFFFBFFFF 256KB + * 15 0xFFFC0000 0xFFFDFFFF 128KB + * 16 0xFFFE0000 0xFFFE7FFF 32KB U-Boot env vars here + * 17 0xFFFE8000 0xFFFEFFFF 32KB U-Boot backup copy of env vars here + * 18 0xFFFF0000 0xFFFFFFFF 64KB */ /* * SDRAM config - see memory map details above. * - * CFG_SDRAM_BASE - Start address of SDRAM, this _must_ be zero! - * CFG_SDRAM_SIZE - Total size of contiguous SDRAM bank(s) + * CFG_SDRAM_BASE - Start address of SDRAM, this _must_ be zero! + * CFG_SDRAM_SIZE - Total size of contiguous SDRAM bank(s) */ -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_SDRAM_SIZE 0x04000000 +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_SIZE 0x04000000 /* * Flash config - see memory map details above. * - * CFG_FLASH_BASE - Start address of flash memory - * CFG_FLASH_SIZE - Total size of contiguous flash mem + * CFG_FLASH_BASE - Start address of flash memory + * CFG_FLASH_SIZE - Total size of contiguous flash mem * CFG_FLASH_ERASE_TOUT - Erase timeout in ms * CFG_FLASH_WRITE_TOUT - Write timeout in ms * CFG_MAX_FLASH_BANKS - Number of banks of flash on board * CFG_MAX_FLASH_SECT - Number of sectors in a bank */ -#define CFG_FLASH_BASE 0xFFC00000 -#define CFG_FLASH_SIZE 0x00400000 +#define CFG_FLASH_BASE 0xFFC00000 +#define CFG_FLASH_SIZE 0x00400000 #define CFG_FLASH_ERASE_TOUT 250000 #define CFG_FLASH_WRITE_TOUT 5000 -#define CFG_MAX_FLASH_BANKS 1 -#define CFG_MAX_FLASH_SECT 19 +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_MAX_FLASH_SECT 19 /* * Monitor config - see memory map details above * - * CFG_MONITOR_BASE - Base address of monitor code - * CFG_MALLOC_LEN - Size of malloc pool (128KB) + * CFG_MONITOR_BASE - Base address of monitor code + * CFG_MALLOC_LEN - Size of malloc pool (128KB) */ -#define CFG_MONITOR_BASE TEXT_BASE -#define CFG_MALLOC_LEN 0x20000 +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MALLOC_LEN 0x20000 /* @@ -259,16 +260,16 @@ * CFG_PROMPT - Prompt string */ -#define CFG_BARGSIZE 1024 -#define CFG_BOOTMAPSZ 0x800000 -#define CFG_CBSIZE 1024 -#define CFG_LOAD_ADDR 0x100000 +#define CFG_BARGSIZE 1024 +#define CFG_BOOTMAPSZ 0x800000 +#define CFG_CBSIZE 1024 +#define CFG_LOAD_ADDR 0x100000 #define CFG_LONGHELP -#define CFG_MAXARGS 16 -#define CFG_MEMTEST_START 0x00040000 -#define CFG_MEMTEST_END 0x00040100 -#define CFG_PBSIZE 1024 -#define CFG_PROMPT "=> " +#define CFG_MAXARGS 16 +#define CFG_MEMTEST_START 0x00040000 +#define CFG_MEMTEST_END 0x00040100 +#define CFG_PBSIZE 1024 +#define CFG_PROMPT "=> " /* @@ -280,12 +281,12 @@ * CFG_ENV_SECT_SIZE - Size of sector containing env vars (32KB) */ -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_ADDR 0xFFFE0000 -#define CFG_ENV_SIZE 0x1000 -#define CFG_ENV_ADDR_REDUND 0xFFFE8000 -#define CFG_ENV_SIZE_REDUND 0x1000 -#define CFG_ENV_SECT_SIZE 0x8000 +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR 0xFFFE0000 +#define CFG_ENV_SIZE 0x1000 +#define CFG_ENV_ADDR_REDUND 0xFFFE8000 +#define CFG_ENV_SIZE_REDUND 0x1000 +#define CFG_ENV_SECT_SIZE 0x8000 /* @@ -296,15 +297,15 @@ * copied to top of RAM by the init code. * * CFG_INIT_RAM_ADDR - Address of Init RAM, above exception vect - * CFG_INIT_RAM_END - Size of Init RAM + * CFG_INIT_RAM_END - Size of Init RAM * CFG_GBL_DATA_SIZE - Ammount of RAM to reserve for global data * CFG_GBL_DATA_OFFSET - Start of global data, top of stack */ -#define CFG_INIT_RAM_ADDR (CFG_SDRAM_BASE + 0x4000) -#define CFG_INIT_RAM_END 0x4000 -#define CFG_GBL_DATA_SIZE 128 -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_RAM_ADDR (CFG_SDRAM_BASE + 0x4000) +#define CFG_INIT_RAM_END 0x4000 +#define CFG_GBL_DATA_SIZE 128 +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) /* @@ -341,71 +342,71 @@ * Cache config * * CFG_CACHELINE_SIZE - Size of a cache line (CPU specific) - * CFG_L2 - L2 cache enabled if defined - * L2_INIT - L2 cache init flags - * L2_ENABLE - L2 cache enable flags + * CFG_L2 - L2 cache enabled if defined + * L2_INIT - L2 cache init flags + * L2_ENABLE - L2 cache enable flags */ -#define CFG_CACHELINE_SIZE 32 +#define CFG_CACHELINE_SIZE 32 #undef CFG_L2 -#define L2_INIT 0 -#define L2_ENABLE 0 +#define L2_INIT 0 +#define L2_ENABLE 0 /* * Clocks config * - * CFG_BUS_HZ - Bus clock frequency in Hz - * CFG_BUS_CLK - As above (?) - * CFG_HZ - Decrementer freq in Hz + * CFG_BUS_HZ - Bus clock frequency in Hz + * CFG_BUS_CLK - As above (?) + * CFG_HZ - Decrementer freq in Hz */ -#define CFG_BUS_HZ CONFIG_BUS_CLK -#define CFG_BUS_CLK CONFIG_BUS_CLK -#define CFG_HZ 1000 +#define CFG_BUS_HZ CONFIG_BUS_CLK +#define CFG_BUS_CLK CONFIG_BUS_CLK +#define CFG_HZ 1000 /* * Serial port config * * CFG_BAUDRATE_TABLE - List of valid baud rates - * CFG_NS16550 - Include the NS16550 driver + * CFG_NS16550 - Include the NS16550 driver * CFG_NS16550_SERIAL - Include the serial (wrapper) driver - * CFG_NS16550_CLK - Frequency of reference clock + * CFG_NS16550_CLK - Frequency of reference clock * CFG_NS16550_REG_SIZE - 64-bit accesses to 8-bit port - * CFG_NS16550_COM1 - Base address of 1st serial port + * CFG_NS16550_COM1 - Base address of 1st serial port */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CFG_NS16550 #define CFG_NS16550_SERIAL -#define CFG_NS16550_CLK 3686400 +#define CFG_NS16550_CLK 3686400 #define CFG_NS16550_REG_SIZE -8 -#define CFG_NS16550_COM1 0x7C000000 +#define CFG_NS16550_COM1 0x7C000000 /* * PCI Config - Address Map B (CHRP) */ -#define CFG_PCI_MEMORY_BUS 0x00000000 -#define CFG_PCI_MEMORY_PHYS 0x00000000 -#define CFG_PCI_MEMORY_SIZE 0x40000000 -#define CFG_PCI_MEM_BUS 0x80000000 -#define CFG_PCI_MEM_PHYS 0x80000000 -#define CFG_PCI_MEM_SIZE 0x7D000000 -#define CFG_ISA_MEM_BUS 0x00000000 -#define CFG_ISA_MEM_PHYS 0xFD000000 -#define CFG_ISA_MEM_SIZE 0x01000000 -#define CFG_PCI_IO_BUS 0x00800000 -#define CFG_PCI_IO_PHYS 0xFE800000 -#define CFG_PCI_IO_SIZE 0x00400000 -#define CFG_ISA_IO_BUS 0x00000000 -#define CFG_ISA_IO_PHYS 0xFE000000 -#define CFG_ISA_IO_SIZE 0x00800000 +#define CFG_PCI_MEMORY_BUS 0x00000000 +#define CFG_PCI_MEMORY_PHYS 0x00000000 +#define CFG_PCI_MEMORY_SIZE 0x40000000 +#define CFG_PCI_MEM_BUS 0x80000000 +#define CFG_PCI_MEM_PHYS 0x80000000 +#define CFG_PCI_MEM_SIZE 0x7D000000 +#define CFG_ISA_MEM_BUS 0x00000000 +#define CFG_ISA_MEM_PHYS 0xFD000000 +#define CFG_ISA_MEM_SIZE 0x01000000 +#define CFG_PCI_IO_BUS 0x00800000 +#define CFG_PCI_IO_PHYS 0xFE800000 +#define CFG_PCI_IO_SIZE 0x00400000 +#define CFG_ISA_IO_BUS 0x00000000 +#define CFG_ISA_IO_PHYS 0xFE000000 +#define CFG_ISA_IO_SIZE 0x00800000 #define CFG_ISA_IO_BASE_ADDRESS CFG_ISA_IO_PHYS -#define CFG_ISA_IO CFG_ISA_IO_PHYS -#define CFG_60X_PCI_IO_OFFSET CFG_ISA_IO_PHYS +#define CFG_ISA_IO CFG_ISA_IO_PHYS +#define CFG_60X_PCI_IO_OFFSET CFG_ISA_IO_PHYS /* @@ -420,12 +421,12 @@ /* * Boot flags * - * BOOTFLAG_COLD - Indicates a power-on boot - * BOOTFLAG_WARM - Indicates a software reset + * BOOTFLAG_COLD - Indicates a power-on boot + * BOOTFLAG_WARM - Indicates a software reset */ -#define BOOTFLAG_COLD 0x01 -#define BOOTFLAG_WARM 0x02 +#define BOOTFLAG_COLD 0x01 +#define BOOTFLAG_WARM 0x02 #endif /* __CONFIG_H */ diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index 83a81fec139..1831bef0de1 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -328,7 +328,7 @@ #define CONFIG_I2C_CMD_TREE #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F -#define CFG_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */ +#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ #define CFG_I2C1_OFFSET 0x3000 #define CFG_I2C2_OFFSET 0x3100 #define CFG_I2C_OFFSET CFG_I2C2_OFFSET -- cgit v1.3.1 From 63e22764d2f8653f68888c667eb65b3996b52680 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Thu, 2 Aug 2007 10:11:18 +0200 Subject: Minor cleanup of _nand build rules. --- Makefile | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) (limited to 'Makefile') diff --git a/Makefile b/Makefile index 97dfb9d2ed8..e7577d10f8d 100644 --- a/Makefile +++ b/Makefile @@ -1015,9 +1015,8 @@ acadia_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amcc acadia_nand_config: unconfig - @mkdir -p $(obj)include - @mkdir -p $(obj)nand_spl - @mkdir -p $(obj)board/amcc/acadia + @mkdir -p $(obj)include $(obj)board/amcc/acadia + @mkdir -p $(obj)nand_spl/board/amcc/acadia @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h @$(MKCONFIG) -n $@ -a acadia ppc ppc4xx acadia amcc @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp @@ -1045,9 +1044,8 @@ bamboo_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc bamboo_nand_config: unconfig - @mkdir -p $(obj)include - @mkdir -p $(obj)nand_spl - @mkdir -p $(obj)board/amcc/bamboo + @mkdir -p $(obj)include $(obj)board/amcc/bamboo + @mkdir -p $(obj)nand_spl/board/amcc/bamboo @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h @$(MKCONFIG) -n $@ -a bamboo ppc ppc4xx bamboo amcc @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp @@ -1228,9 +1226,8 @@ rainier_config: unconfig sequoia_nand_config \ rainier_nand_config: unconfig - @mkdir -p $(obj)include - @mkdir -p $(obj)nand_spl - @mkdir -p $(obj)board/amcc/sequoia + @mkdir -p $(obj)include $(obj)board/amcc/sequoia + @mkdir -p $(obj)nand_spl/board/amcc/sequoia @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h -- cgit v1.3.1 From 86b116b1b1e165ca4840daefed36d2e3b8460173 Mon Sep 17 00:00:00 2001 From: Bartlomiej Sieka Date: Fri, 3 Aug 2007 12:08:16 +0200 Subject: cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family. Add the ability for modules from the Schindler cm5200 family to use a single U-Boot image: - rename cm1_qp1 to cm5200 - add run-time module detection - parametrize SDRAM configuration according to the module we are running on Few minor, board-specific fixes included in this patch: - better MAC address handling - updated default environment ('update' command uses +{filesize} now) - improved error messages in the auto-update code - allow booting U-Boot from RAM (CFG_RAMBOOT) Signed-off-by: Grzegorz Bernacki Signed-off-by: Piotr Kruszynski Signed-off-by: Bartlomiej Sieka --- MAKEALL | 2 +- Makefile | 9 +- board/cm1_qp1/Makefile | 50 ----- board/cm1_qp1/cm1_qp1.c | 222 ---------------------- board/cm1_qp1/cmd_cm1_qp1.c | 446 ------------------------------------------- board/cm1_qp1/config.mk | 26 --- board/cm1_qp1/fwupdate.c | 187 ------------------ board/cm1_qp1/fwupdate.h | 47 ----- board/cm1_qp1/u-boot.lds | 123 ------------ board/cm5200/Makefile | 50 +++++ board/cm5200/cm5200.c | 425 +++++++++++++++++++++++++++++++++++++++++ board/cm5200/cm5200.h | 184 ++++++++++++++++++ board/cm5200/cmd_cm5200.c | 448 ++++++++++++++++++++++++++++++++++++++++++++ board/cm5200/config.mk | 26 +++ board/cm5200/fwupdate.c | 200 ++++++++++++++++++++ board/cm5200/fwupdate.h | 47 +++++ board/cm5200/u-boot.lds | 123 ++++++++++++ cpu/mpc5xxx/fec.c | 2 +- include/configs/cm1_qp1.h | 358 ----------------------------------- include/configs/cm5200.h | 362 +++++++++++++++++++++++++++++++++++ 20 files changed, 1869 insertions(+), 1468 deletions(-) delete mode 100644 board/cm1_qp1/Makefile delete mode 100644 board/cm1_qp1/cm1_qp1.c delete mode 100644 board/cm1_qp1/cmd_cm1_qp1.c delete mode 100644 board/cm1_qp1/config.mk delete mode 100644 board/cm1_qp1/fwupdate.c delete mode 100644 board/cm1_qp1/fwupdate.h delete mode 100644 board/cm1_qp1/u-boot.lds create mode 100644 board/cm5200/Makefile create mode 100644 board/cm5200/cm5200.c create mode 100644 board/cm5200/cm5200.h create mode 100644 board/cm5200/cmd_cm5200.c create mode 100644 board/cm5200/config.mk create mode 100644 board/cm5200/fwupdate.c create mode 100644 board/cm5200/fwupdate.h create mode 100644 board/cm5200/u-boot.lds delete mode 100644 include/configs/cm1_qp1.h create mode 100644 include/configs/cm5200.h (limited to 'Makefile') diff --git a/MAKEALL b/MAKEALL index 2a03b687083..c69dc1b3c47 100755 --- a/MAKEALL +++ b/MAKEALL @@ -35,7 +35,7 @@ LIST_5xx=" \ ######################################################################### LIST_5xxx=" \ - BC3450 cm1_qp1 cpci5200 EVAL5200 \ + BC3450 cm5200 cpci5200 EVAL5200 \ fo300 icecube_5100 icecube_5200 lite5200b \ mcc200 mecp5200 motionpro o2dnt \ pf5200 PM520 TB5200 Total5100 \ diff --git a/Makefile b/Makefile index 5b87aad5b9f..7f5aefe4734 100644 --- a/Makefile +++ b/Makefile @@ -532,13 +532,8 @@ PM520_ROMBOOT_DDR_config: unconfig smmaco4_config: unconfig @$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200 -cm1_qp1_config: unconfig - @ >include/config.h - @[ -z "$(findstring cm1_qp1,$@)" ] || \ - { echo "... with 64 MByte SDRAM" ; \ - echo "... with 32 MByte Flash" ; \ - } - @./mkconfig -a cm1_qp1 ppc mpc5xxx cm1_qp1 +cm5200_config: unconfig + @./mkconfig -a cm5200 ppc mpc5xxx cm5200 spieval_config: unconfig @$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200 diff --git a/board/cm1_qp1/Makefile b/board/cm1_qp1/Makefile deleted file mode 100644 index e7393267e7a..00000000000 --- a/board/cm1_qp1/Makefile +++ /dev/null @@ -1,50 +0,0 @@ -# -# (C) Copyright 2003-2007 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).a - -COBJS := $(BOARD).o cmd_cm1_qp1.o fwupdate.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/cm1_qp1/cm1_qp1.c b/board/cm1_qp1/cm1_qp1.c deleted file mode 100644 index b49298f64b6..00000000000 --- a/board/cm1_qp1/cm1_qp1.c +++ /dev/null @@ -1,222 +0,0 @@ -/* - * (C) Copyright 2003-2007 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2004 - * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. - * - * (C) Copyright 2004-2005 - * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#ifdef CONFIG_OF_FLAT_TREE -#include -#endif /* CONFIG_OF_FLAT_TREE */ - -#include "fwupdate.h" - -#ifndef CFG_RAMBOOT -/* - * Helper function to initialize SDRAM controller. - */ -static void sdram_start(int hi_addr) -{ - long hi_addr_bit = hi_addr ? 0x01000000 : 0; - - /* unlock mode register */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | - hi_addr_bit; - - /* precharge all banks */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | - hi_addr_bit; - - /* auto refresh */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | - hi_addr_bit; - - /* auto refresh, second time */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | - hi_addr_bit; - - /* set mode register */ - *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE; - - /* normal operation */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit; -} -#endif /* CFG_RAMBOOT */ - -/* - * Initalize SDRAM - configure SDRAM controller, detect memory size. - */ -long int initdram(int board_type) -{ - ulong dramsize = 0; -#ifndef CFG_RAMBOOT - ulong test1, test2; - - /* configure SDRAM start/end for detection */ - *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */ - - /* setup config registers */ - *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; - *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; - - sdram_start(0); - test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000); - sdram_start(1); - test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000); - if (test1 > test2) { - sdram_start(0); - dramsize = test1; - } else - dramsize = test2; - - /* memory smaller than 1MB is impossible */ - if (dramsize < (1 << 20)) - dramsize = 0; - - /* set SDRAM CS0 size according to the amount of RAM found */ - if (dramsize > 0) { - *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + - __builtin_ffs(dramsize >> 20) - 1; - } else - *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */ -#else /* CFG_RAMBOOT */ - /* retrieve size of memory connected to SDRAM CS0 */ - dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF; - if (dramsize >= 0x13) - dramsize = (1 << (dramsize - 0x13)) << 20; - else - dramsize = 0; -#endif /* CFG_RAMBOOT */ - - /* - * On MPC5200B we need to set the special configuration delay in the - * DDR controller. Refer to chapter 8.7.5 SDelay--MBAR + 0x0190 of - * the MPC5200B User's Manual. - */ - *(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04; - __asm__ volatile ("sync"); - - return dramsize; -} - - -int checkboard(void) -{ - puts("Board: CM1.QP1\n"); - return 0; -} - - -int board_early_init_r(void) -{ - /* - * Now, when we are in RAM, enable flash write access for detection - * process. Note that CS_BOOT cannot be cleared when executing in - * flash. - */ - *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ - return 0; -} - - -#ifdef CONFIG_POST -int post_hotkeys_pressed(void) -{ - return 0; -} -#endif /* CONFIG_POST */ - - -#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER) -void post_word_store(ulong a) -{ - vu_long *save_addr = (vu_long *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE); - *save_addr = a; -} - - -ulong post_word_load(void) -{ - vu_long *save_addr = (vu_long *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE); - return *save_addr; -} -#endif /* CONFIG_POST || CONFIG_LOGBUFFER */ - - -#ifdef CONFIG_MISC_INIT_R -int misc_init_r(void) -{ -#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) - uchar buf[6]; - char str[18]; - - /* Read ethaddr from EEPROM */ - if (i2c_read(CFG_I2C_EEPROM, CONFIG_MAC_OFFSET, 2, buf, 6) == 0) { - sprintf(str, "%02X:%02X:%02X:%02X:%02X:%02X", - buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]); - /* Check if MAC addr is owned by Schindler */ - if (strstr(str, "00:06:C3") != str) { - printf(LOG_PREFIX "Warning - Illegal MAC address (%s)" - " in EEPROM.\n", str); - printf(LOG_PREFIX "Using MAC from environment\n"); - } else { - printf(LOG_PREFIX "Using MAC (%s) from I2C EEPROM\n", - str); - setenv("ethaddr", str); - } - } else { - printf(LOG_PREFIX "Warning - Unable to read MAC from I2C" - " device at address %02X:%04X\n", CFG_I2C_EEPROM, - CONFIG_MAC_OFFSET); - printf(LOG_PREFIX "Using MAC from environment\n"); - } - return 0; -#endif /* defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) */ -} -#endif /* CONFIG_MISC_INIT_R */ - - -#ifdef CONFIG_LAST_STAGE_INIT -int last_stage_init(void) -{ -#ifdef CONFIG_USB_STORAGE - cm1_fwupdate(); -#endif /* CONFIG_USB_STORAGE */ - return 0; -} -#endif /* CONFIG_LAST_STAGE_INIT */ - - -#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) -{ - ft_cpu_setup(blob, bd); -} -#endif /* defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/cm1_qp1/cmd_cm1_qp1.c b/board/cm1_qp1/cmd_cm1_qp1.c deleted file mode 100644 index 4a01d2a7f4c..00000000000 --- a/board/cm1_qp1/cmd_cm1_qp1.c +++ /dev/null @@ -1,446 +0,0 @@ -/* - * (C) Copyright 2007 Markus Kappeler - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include - -#if (CONFIG_COMMANDS & CFG_CMD_BSP) - -int do_i2c(char *argv[]) -{ - unsigned char temp, temp1; - - printf("Starting I2C Test\n" - "Please set Jumper:\nI2C SDA 2-3\nI2C SCL 2-3\n\n" - "Please press any key to start\n\n"); - getc(); - - temp = 0xf0; /* set io 0-4 as output */ - i2c_write(CFG_I2C_IO, 3, 1, (uchar *)&temp, 1); - - printf("Press I2C4-7. LED I2C0-3 should have the same state\n\n" - "Press any key to stop\n\n"); - - while (!tstc()) { - i2c_read(CFG_I2C_IO, 0, 1, (uchar *)&temp, 1); - temp1 = (temp >> 4) & 0x03; - temp1 |= (temp >> 3) & 0x08; /* S302 -> LED303 */ - temp1 |= (temp >> 5) & 0x04; /* S303 -> LED302 */ - temp = temp1; - i2c_write(CFG_I2C_IO, 1, 1, (uchar *)&temp, 1); - } - getc(); - - return 0; -} - -int do_usbtest(char *argv[]) -{ - int i; - static int usb_stor_curr_dev = -1; /* current device */ - - printf("Starting USB Test\n" - "Please insert USB Memmory Stick\n\n" - "Please press any key to start\n\n"); - getc(); - - usb_stop(); - printf("(Re)start USB...\n"); - i = usb_init(); -#ifdef CONFIG_USB_STORAGE - /* try to recognize storage devices immediately */ - if (i >= 0) - usb_stor_curr_dev = usb_stor_scan(1); -#endif /* CONFIG_USB_STORAGE */ - if (usb_stor_curr_dev >= 0) - printf("Found USB Storage Dev continue with Test...\n"); - else { - printf("No USB Storage Device detected.. Stop Test\n"); - return 1; - } - - usb_stor_info(); - - printf("stopping USB..\n"); - usb_stop(); - - return 0; -} - -int do_led(char *argv[]) -{ - int i = 0; - struct mpc5xxx_gpt_0_7 *gpt = (struct mpc5xxx_gpt_0_7 *)MPC5XXX_GPT; - - printf("Starting LED Test\n" - "Please set Switch S500 all off\n\n" - "Please press any key to start\n\n"); - getc(); - - /* configure timer 2-3 for simple GPIO output High */ - gpt->gpt2.emsr |= 0x00000034; - gpt->gpt3.emsr |= 0x00000034; - - (*(vu_long *)MPC5XXX_WU_GPIO_ENABLE) |= 0x80000000; - (*(vu_long *)MPC5XXX_WU_GPIO_DIR) |= 0x80000000; - printf("Please press any key to stop\n\n"); - while (!tstc()) { - if (i == 1) { - (*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) |= 0x80000000; - gpt->gpt2.emsr &= ~0x00000010; - gpt->gpt3.emsr &= ~0x00000010; - } else if (i == 2) { - (*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) &= ~0x80000000; - gpt->gpt2.emsr &= ~0x00000010; - gpt->gpt3.emsr |= 0x00000010; - } else if (i >= 3) { - (*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) &= ~0x80000000; - gpt->gpt3.emsr &= ~0x00000010; - gpt->gpt2.emsr |= 0x00000010; - i = 0; - } - i++; - udelay(200000); - } - getc(); - - (*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) |= 0x80000000; - gpt->gpt2.emsr |= 0x00000010; - gpt->gpt3.emsr |= 0x00000010; - - return 0; -} - -int do_rs232(char *argv[]) -{ - int error_status = 0; - struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO; - struct mpc5xxx_psc *psc1 = (struct mpc5xxx_psc *)MPC5XXX_PSC1; - - /* Configure PSC 2-3-6 as GPIO */ - gpio->port_config &= 0xFF0FF80F; - - switch (simple_strtoul(argv[2], NULL, 10)) { - case 1: - /* check RTS <-> CTS loop */ - /* set rts to 0 */ - printf("Uart 1 test: RX TX tested by using U-Boot\n" - "Please connect RTS with CTS on Uart1 plug\n\n" - "Press any key to start\n\n"); - getc(); - - psc1->op1 |= 0x01; - - /* wait some time before requesting status */ - udelay(10); - - /* check status at cts */ - if ((psc1->ip & 0x01) != 0) { - error_status = 3; - printf("%s: failure at rs232_1, cts status is %d " - "(should be 0)\n", - __FUNCTION__, (psc1->ip & 0x01)); - } - - /* set rts to 1 */ - psc1->op0 |= 0x01; - - /* wait some time before requesting status */ - udelay(10); - - /* check status at cts */ - if ((psc1->ip & 0x01) != 1) { - error_status = 3; - printf("%s: failure at rs232_1, cts status is %d " - "(should be 1)\n", - __FUNCTION__, (psc1->ip & 0x01)); - } - break; - case 2: - /* set PSC2_0, PSC2_2 as output and PSC2_1, PSC2_3 as input */ - printf("Uart 2 test: Please use RS232 Loopback plug on UART2\n" - "\nPress any key to start\n\n"); - getc(); - - gpio->simple_gpioe &= ~(0x000000F0); - gpio->simple_gpioe |= 0x000000F0; - gpio->simple_ddr &= ~(0x000000F0); - gpio->simple_ddr |= 0x00000050; - - /* check TXD <-> RXD loop */ - /* set TXD to 1 */ - gpio->simple_dvo |= (1 << 4); - - /* wait some time before requesting status */ - udelay(10); - - if ((gpio->simple_ival & 0x00000020) != 0x00000020) { - error_status = 2; - printf("%s: failure at rs232_2, rxd status is %d " - "(should be 1)\n", __FUNCTION__, - (gpio->simple_ival & 0x00000020) >> 5); - } - - /* set TXD to 0 */ - gpio->simple_dvo &= ~(1 << 4); - - /* wait some time before requesting status */ - udelay(10); - - if ((gpio->simple_ival & 0x00000020) != 0x00000000) { - error_status = 2; - printf("%s: failure at rs232_2, rxd status is %d " - "(should be 0)\n", __FUNCTION__, - (gpio->simple_ival & 0x00000020) >> 5); - } - - /* check RTS <-> CTS loop */ - /* set RTS to 1 */ - gpio->simple_dvo |= (1 << 6); - - /* wait some time before requesting status */ - udelay(10); - - if ((gpio->simple_ival & 0x00000080) != 0x00000080) { - error_status = 3; - printf("%s: failure at rs232_2, cts status is %d " - "(should be 1)\n", __FUNCTION__, - (gpio->simple_ival & 0x00000080) >> 7); - } - - /* set RTS to 0 */ - gpio->simple_dvo &= ~(1 << 6); - - /* wait some time before requesting status */ - udelay(10); - - if ((gpio->simple_ival & 0x00000080) != 0x00000000) { - error_status = 3; - printf("%s: failure at rs232_2, cts status is %d " - "(should be 0)\n", __FUNCTION__, - (gpio->simple_ival & 0x00000080) >> 7); - } - break; - case 3: - /* set PSC3_0, PSC3_2 as output and PSC3_1, PSC3_3 as input */ - printf("Uart 3 test: Please use RS232 Loopback plug on UART2\n" - "\nPress any key to start\n\n"); - getc(); - - gpio->simple_gpioe &= ~(0x00000F00); - gpio->simple_gpioe |= 0x00000F00; - - gpio->simple_ddr &= ~(0x00000F00); - gpio->simple_ddr |= 0x00000500; - - /* check TXD <-> RXD loop */ - /* set TXD to 1 */ - gpio->simple_dvo |= (1 << 8); - - /* wait some time before requesting status */ - udelay(10); - - if ((gpio->simple_ival & 0x00000200) != 0x00000200) { - error_status = 2; - printf("%s: failure at rs232_3, rxd status is %d " - "(should be 1)\n", __FUNCTION__, - (gpio->simple_ival & 0x00000200) >> 9); - } - - /* set TXD to 0 */ - gpio->simple_dvo &= ~(1 << 8); - - /* wait some time before requesting status */ - udelay(10); - - if ((gpio->simple_ival & 0x00000200) != 0x00000000) { - error_status = 2; - printf("%s: failure at rs232_3, rxd status is %d " - "(should be 0)\n", __FUNCTION__, - (gpio->simple_ival & 0x00000200) >> 9); - } - - /* check RTS <-> CTS loop */ - /* set RTS to 1 */ - gpio->simple_dvo |= (1 << 10); - - /* wait some time before requesting status */ - udelay(10); - - if ((gpio->simple_ival & 0x00000800) != 0x00000800) { - error_status = 3; - printf("%s: failure at rs232_3, cts status is %d " - "(should be 1)\n", __FUNCTION__, - (gpio->simple_ival & 0x00000800) >> 11); - } - - /* set RTS to 0 */ - gpio->simple_dvo &= ~(1 << 10); - - /* wait some time before requesting status */ - udelay(10); - - if ((gpio->simple_ival & 0x00000800) != 0x00000000) { - error_status = 3; - printf("%s: failure at rs232_3, cts status is %d " - "(should be 0)\n", __FUNCTION__, - (gpio->simple_ival & 0x00000800) >> 11); - } - break; - case 4: - /* set PSC6_2, PSC6_3 as output and PSC6_0, PSC6_1 as input */ - printf("Uart 4 test: Please use RS232 Loopback plug on UART2\n" - "\nPress any key to start\n\n"); - getc(); - - gpio->simple_gpioe &= ~(0xF0000000); - gpio->simple_gpioe |= 0x30000000; - - gpio->simple_ddr &= ~(0xf0000000); - gpio->simple_ddr |= 0x30000000; - - (*(vu_long *)MPC5XXX_WU_GPIO_ENABLE) |= 0x30000000; - (*(vu_long *)MPC5XXX_WU_GPIO_DIR) &= ~(0x30000000); - - /* check TXD <-> RXD loop */ - /* set TXD to 1 */ - gpio->simple_dvo |= (1 << 28); - - /* wait some time before requesting status */ - udelay(10); - - if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x10000000) != - 0x10000000) { - error_status = 2; - printf("%s: failure at rs232_4, rxd status is %d " - "(should be 1)\n", __FUNCTION__, - ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & - 0x10000000) >> 28); - } - - /* set TXD to 0 */ - gpio->simple_dvo &= ~(1 << 28); - - /* wait some time before requesting status */ - udelay(10); - - if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x10000000) != - 0x00000000) { - error_status = 2; - printf("%s: failure at rs232_4, rxd status is %d " - "(should be 0)\n", __FUNCTION__, - ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & - 0x10000000) >> 28); - } - - /* check RTS <-> CTS loop */ - /* set RTS to 1 */ - gpio->simple_dvo |= (1 << 29); - - /* wait some time before requesting status */ - udelay(10); - - if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x20000000) != - 0x20000000) { - error_status = 3; - printf("%s: failure at rs232_4, cts status is %d " - "(should be 1)\n", __FUNCTION__, - ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & - 0x20000000) >> 29); - } - - /* set RTS to 0 */ - gpio->simple_dvo &= ~(1 << 29); - - /* wait some time before requesting status */ - udelay(10); - - if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x20000000) != - 0x00000000) { - error_status = 3; - printf("%s: failure at rs232_4, cts status is %d " - "(should be 0)\n", __FUNCTION__, - ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & - 0x20000000) >> 29); - } - break; - default: - printf("%s: invalid rs232 number %s\n", __FUNCTION__, argv[2]); - error_status = 1; - break; - } - gpio->port_config |= (CFG_GPS_PORT_CONFIG & 0xFF0FF80F); - - return error_status; -} - -int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) -{ - int rcode = -1; - - switch (argc) { - case 2: - if (strncmp(argv[1], "i2c", 3) == 0) - rcode = do_i2c(argv); - else if (strncmp(argv[1], "led", 3) == 0) - rcode = do_led(argv); - else if (strncmp(argv[1], "usb", 3) == 0) - rcode = do_usbtest(argv); - break; - case 3: - if (strncmp(argv[1], "rs232", 3) == 0) - rcode = do_rs232(argv); - break; - } - - switch (rcode) { - case -1: - printf("Usage:\n" - "fkt { i2c | led | usb }\n" - "fkt rs232 number\n"); - rcode = 1; - break; - case 0: - printf("Test passed\n"); - break; - default: - printf("Test failed with code: %d\n", rcode); - } - - return rcode; -} - -U_BOOT_CMD( - fkt, 4, 1, cmd_fkt, - "fkt - Function test routines\n", - "i2c\n" - " - Test I2C communication\n" - "fkt led\n" - " - Test LEDs\n" - "fkt rs232 number\n" - " - Test RS232 (loopback plug(s) for RS232 required)\n" - "fkt usb\n" - " - Test USB communication\n" -); -#endif /* CFG_CMD_BSP */ diff --git a/board/cm1_qp1/config.mk b/board/cm1_qp1/config.mk deleted file mode 100644 index 7f061391a24..00000000000 --- a/board/cm1_qp1/config.mk +++ /dev/null @@ -1,26 +0,0 @@ -# -# (C) Copyright 2007 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -TEXT_BASE = 0xfc000000 - -PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board diff --git a/board/cm1_qp1/fwupdate.c b/board/cm1_qp1/fwupdate.c deleted file mode 100644 index 637375e5989..00000000000 --- a/board/cm1_qp1/fwupdate.c +++ /dev/null @@ -1,187 +0,0 @@ -/* - * (C) Copyright 2007 Schindler Lift Inc. - * (C) Copyright 2007 Semihalf - * - * Author: Michel Marti - * Adapted for U-Boot 1.2 by Piotr Kruszynski : - * - code clean-up - * - bugfix for overwriting bootargs by user - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include - -#include "fwupdate.h" - -extern int do_bootm(cmd_tbl_t *, int, int, char *[]); -extern long do_fat_read(const char *, void *, unsigned long, int); -extern int do_fat_fsload(cmd_tbl_t *, int, int, char *[]); - -static int load_rescue_image(ulong); - -void cm1_fwupdate(void) -{ - cmd_tbl_t *bcmd; - char *rsargs; - char *tmp = NULL; - char ka[16]; - char *argv[3] = { "bootm", ka, NULL }; - - /* Check if rescue system is disabled... */ - if (getenv("norescue")) { - printf(LOG_PREFIX "Rescue System disabled.\n"); - return; - } - - /* Check if we have a USB storage device and load image */ - if (load_rescue_image(LOAD_ADDR)) - return; - - bcmd = find_cmd("bootm"); - if (!bcmd) - return; - - sprintf(ka, "%lx", LOAD_ADDR); - - /* prepare our bootargs */ - rsargs = getenv("rs-args"); - if (!rsargs) - rsargs = RS_BOOTARGS; - else { - tmp = malloc(strlen(rsargs+1)); - if (!tmp) { - printf(LOG_PREFIX "Memory allocation failed\n"); - return; - } - strcpy(tmp, rsargs); - rsargs = tmp; - } - - setenv("bootargs", rsargs); - - if (rsargs == tmp) - free(rsargs); - - printf(LOG_PREFIX "Starting update system (bootargs=%s)...\n", rsargs); - do_bootm(bcmd, 0, 2, argv); -} - -static int load_rescue_image(ulong addr) -{ - disk_partition_t info; - int devno; - int partno; - int i; - char fwdir[64]; - char nxri[128]; - char *tmp; - char dev[7]; - char addr_str[16]; - char *argv[6] = { "fatload", "usb", dev, addr_str, nxri, NULL }; - block_dev_desc_t *stor_dev = NULL; - cmd_tbl_t *bcmd; - - /* Get name of firmware directory */ - tmp = getenv("fw-dir"); - - /* Copy it into fwdir */ - strncpy(fwdir, tmp ? tmp : FW_DIR, sizeof(fwdir)); - fwdir[sizeof(fwdir) - 1] = 0; /* Terminate string */ - - printf(LOG_PREFIX "Checking for firmware image directory '%s' on USB" - " storage...\n", fwdir); - usb_stop(); - if (usb_init() != 0) - return 1; - - /* Check for storage device */ - if (usb_stor_scan(1) != 0) { - usb_stop(); - return 1; - } - - /* Detect storage device */ - for (devno = 0; devno < USB_MAX_STOR_DEV; devno++) { - stor_dev = usb_stor_get_dev(devno); - if (stor_dev->type != DEV_TYPE_UNKNOWN) - break; - } - if (!stor_dev || stor_dev->type == DEV_TYPE_UNKNOWN) { - printf(LOG_PREFIX "No valid storage device found...\n"); - usb_stop(); - return 1; - } - - /* Detect partition */ - for (partno = -1, i = 0; i < 6; i++) { - if (get_partition_info(stor_dev, i, &info) == 0) { - if (fat_register_device(stor_dev, i) == 0) { - /* Check if rescue image is present */ - FW_DEBUG("Looking for firmware directory '%s'" - " on partition %d\n", fwdir, i); - if (do_fat_read(fwdir, NULL, 0, LS_NO) == -1) { - FW_DEBUG("No NX rescue image on " - "partition %d.\n", i); - } else { - partno = i; - FW_DEBUG("Partition %d contains " - "firmware directory\n", partno); - break; - } - } - } - } - - if (partno == -1) { - printf(LOG_PREFIX "Error: No valid (FAT) partition detected\n"); - usb_stop(); - return 1; - } - - /* Load the rescue image */ - bcmd = find_cmd("fatload"); - if (!bcmd) { - printf(LOG_PREFIX "Error - 'fatload' command not present.\n"); - usb_stop(); - return 1; - } - - tmp = getenv("nx-rescue-image"); - sprintf(nxri, "%s/%s", fwdir, tmp ? tmp : RESCUE_IMAGE); - sprintf(dev, "%d:%d", devno, partno); - sprintf(addr_str, "%lx", addr); - - FW_DEBUG("fat_fsload device='%s', addr='%s', file: %s\n", - dev, addr_str, nxri); - - if (do_fat_fsload(bcmd, 0, 5, argv) != 0) { - usb_stop(); - return 1; - } - - /* Stop USB */ - usb_stop(); - return 0; -} diff --git a/board/cm1_qp1/fwupdate.h b/board/cm1_qp1/fwupdate.h deleted file mode 100644 index 119c2d691c8..00000000000 --- a/board/cm1_qp1/fwupdate.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * (C) Copyright 2007 Schindler Lift Inc. - * - * Author: Michel Marti - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __FW_UPDATE_H -#define __FW_UPDATE_H - -/* Default prefix for output messages */ -#define LOG_PREFIX "CM1: " - -/* Extra debug macro */ -#ifdef CONFIG_FWUPDATE_DEBUG -#define FW_DEBUG(fmt...) printf(LOG_PREFIX fmt) -#else -#define FW_DEBUG(fmt...) -#endif - -/* Name of the directory holding firmware images */ -#define FW_DIR "nx-fw" -#define RESCUE_IMAGE "nxrs.img" -#define LOAD_ADDR 0x400000 -#define RS_BOOTARGS "ramdisk=8192K" - -/* Main function for fwupdate */ -void cm1_fwupdate(void); - -#endif /* __FW_UPDATE_H */ diff --git a/board/cm1_qp1/u-boot.lds b/board/cm1_qp1/u-boot.lds deleted file mode 100644 index 8fa9c0f7ed5..00000000000 --- a/board/cm1_qp1/u-boot.lds +++ /dev/null @@ -1,123 +0,0 @@ -/* - * (C) Copyright 2003-2007 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/mpc5xxx/start.o (.text) - *(.text) - *(.fixup) - *(.got1) - . = ALIGN(16); - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - *(.eh_frame) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; - __fixup_entries = (. - _FIXUP_TABLE_) >> 2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/cm5200/Makefile b/board/cm5200/Makefile new file mode 100644 index 00000000000..8ebdb1aa28b --- /dev/null +++ b/board/cm5200/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2003-2007 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o cmd_cm5200.o fwupdate.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/cm5200/cm5200.c b/board/cm5200/cm5200.c new file mode 100644 index 00000000000..6804e33c27e --- /dev/null +++ b/board/cm5200/cm5200.c @@ -0,0 +1,425 @@ +/* + * (C) Copyright 2003-2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004 + * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. + * + * (C) Copyright 2004-2005 + * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de + * + * Adapted to U-Boot 1.2 by: + * Bartlomiej Sieka : + * - HW ID readout from EEPROM + * - module detection + * Grzegorz Bernacki : + * - run-time SDRAM controller configuration + * - LIBFDT support + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_OF_LIBFDT +#include +#include +#include +#endif /* CONFIG_OF_LIBFDT */ + + +#include "cm5200.h" +#include "fwupdate.h" + +DECLARE_GLOBAL_DATA_PTR; + +static hw_id_t hw_id; + + +#ifndef CFG_RAMBOOT +/* + * Helper function to initialize SDRAM controller. + */ +static void sdram_start(int hi_addr, mem_conf_t *mem_conf) +{ + long hi_addr_bit = hi_addr ? 0x01000000 : 0; + + /* unlock mode register */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = mem_conf->control | 0x80000000 | + hi_addr_bit; + + /* precharge all banks */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = mem_conf->control | 0x80000002 | + hi_addr_bit; + + /* auto refresh */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = mem_conf->control | 0x80000004 | + hi_addr_bit; + + /* auto refresh, second time */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = mem_conf->control | 0x80000004 | + hi_addr_bit; + + /* set mode register */ + *(vu_long *)MPC5XXX_SDRAM_MODE = mem_conf->mode; + + /* normal operation */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = mem_conf->control | hi_addr_bit; +} +#endif /* CFG_RAMBOOT */ + + +/* + * Retrieve memory configuration for a given module. board_type is the index + * in hw_id_list[] corresponding to the module we are executing on; we return + * SDRAM controller settings approprate for this module. + */ +static mem_conf_t* get_mem_config(int board_type) +{ + switch(board_type){ + case CM1_QA: + return memory_config[0]; + case CM11_QA: + case CMU1_QA: + return memory_config[1]; + default: + printf("ERROR: Unknown module, using a default SDRAM " + "configuration - things may not work!!!.\n"); + return memory_config[0]; + } +} + + +/* + * Initalize SDRAM - configure SDRAM controller, detect memory size. + */ +long int initdram(int board_type) +{ + ulong dramsize = 0; +#ifndef CFG_RAMBOOT + ulong test1, test2; + mem_conf_t *mem_conf; + + mem_conf = get_mem_config(board_type); + + /* configure SDRAM start/end for detection */ + *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */ + + /* setup config registers */ + *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = mem_conf->config1; + *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = mem_conf->config2; + + sdram_start(0, mem_conf); + test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000); + sdram_start(1, mem_conf); + test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000); + if (test1 > test2) { + sdram_start(0, mem_conf); + dramsize = test1; + } else + dramsize = test2; + + /* memory smaller than 1MB is impossible */ + if (dramsize < (1 << 20)) + dramsize = 0; + + /* set SDRAM CS0 size according to the amount of RAM found */ + if (dramsize > 0) { + *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + + __builtin_ffs(dramsize >> 20) - 1; + } else + *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */ +#else /* CFG_RAMBOOT */ + /* retrieve size of memory connected to SDRAM CS0 */ + dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF; + if (dramsize >= 0x13) + dramsize = (1 << (dramsize - 0x13)) << 20; + else + dramsize = 0; +#endif /* !CFG_RAMBOOT */ + + /* + * On MPC5200B we need to set the special configuration delay in the + * DDR controller. Refer to chapter 8.7.5 SDelay--MBAR + 0x0190 of + * the MPC5200B User's Manual. + */ + *(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04; + __asm__ volatile ("sync"); + + return dramsize; +} + + +/* + * Read module hardware identification data from the I2C EEPROM. + */ +static void read_hw_id(hw_id_t hw_id) +{ + int i; + for (i = 0; i < HW_ID_ELEM_COUNT; ++i) + if (i2c_read(CFG_I2C_EEPROM, + hw_id_format[i].offset, + 2, + (uchar *)&hw_id[i][0], + hw_id_format[i].length) != 0) + printf("ERROR: can't read HW ID from EEPROM\n"); +} + + +/* + * Identify module we are running on, set gd->board_type to the index in + * hw_id_list[] corresponding to the module identifed, or to + * CM5200_UNKNOWN_MODULE if we can't identify the module. + */ +static void identify_module(hw_id_t hw_id) +{ + int i, j, element; + char match; + gd->board_type = CM5200_UNKNOWN_MODULE; + for (i = 0; i < sizeof (hw_id_list) / sizeof (char **); ++i) { + match = 1; + for (j = 0; j < sizeof (hw_id_identify) / sizeof (int); ++j) { + element = hw_id_identify[j]; + if (strncmp(hw_id_list[i][element], + &hw_id[element][0], + hw_id_format[element].length) != 0) { + match = 0; + break; + } + } + if (match) { + gd->board_type = i; + break; + } + } +} + + +/* + * Compose string with module name. + * buf is assumed to have enough space, and be null-terminated. + */ +static void compose_module_name(hw_id_t hw_id, char *buf) +{ + char tmp[MODULE_NAME_MAXLEN]; + strncat(buf, &hw_id[PCB_NAME][0], hw_id_format[PCB_NAME].length); + strncat(buf, ".", 1); + strncat(buf, &hw_id[FORM][0], hw_id_format[FORM].length); + strncat(buf, &hw_id[VERSION][0], hw_id_format[VERSION].length); + strncat(buf, " (", 2); + strncat(buf, &hw_id[IDENTIFICATION_NUMBER][0], + hw_id_format[IDENTIFICATION_NUMBER].length); + sprintf(tmp, " / %u.%u)", + hw_id[MAJOR_SW_VERSION][0], + hw_id[MINOR_SW_VERSION][0]); + strcat(buf, tmp); +} + + +/* + * Compose string with hostname. + * buf is assumed to have enough space, and be null-terminated. + */ +static void compose_hostname(hw_id_t hw_id, char *buf) +{ + char *p; + strncat(buf, &hw_id[PCB_NAME][0], hw_id_format[PCB_NAME].length); + strncat(buf, "_", 1); + strncat(buf, &hw_id[FORM][0], hw_id_format[FORM].length); + strncat(buf, &hw_id[VERSION][0], hw_id_format[VERSION].length); + for (p = buf; *p; ++p) + *p = tolower(*p); + +} + + +#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) +/* + * Update 'model' and 'memory' properties in the blob according to the module + * that we are running on. + */ +static void ft_blob_update(void *blob, bd_t *bd) +{ + int len, ret, nodeoffset = 0; + char module_name[MODULE_NAME_MAXLEN] = {0}; + ulong memory_data[2] = {0}; + + compose_module_name(hw_id, module_name); + len = strlen(module_name) + 1; + + ret = fdt_setprop(blob, nodeoffset, "model", module_name, len); + if (ret < 0) + printf("ft_blob_update(): cannot set /model property err:%s\n", + fdt_strerror(ret)); + + memory_data[0] = cpu_to_be32(bd->bi_memstart); + memory_data[1] = cpu_to_be32(bd->bi_memsize); + + nodeoffset = fdt_find_node_by_path (blob, "/memory"); + if (nodeoffset >= 0) { + ret = fdt_setprop(blob, nodeoffset, "reg", memory_data, + sizeof(memory_data)); + if (ret < 0) + printf("ft_blob_update): cannot set /memory/reg " + "property err:%s\n", fdt_strerror(ret)); + } + else { + /* memory node is required in dts */ + printf("ft_blob_update(): cannot find /memory node " + "err:%s\n", fdt_strerror(nodeoffset)); + } +} +#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */ + + +/* + * Read HW ID from I2C EEPROM and detect the modue we are running on. Note + * that we need to use local variable for readout, because global data is not + * writable yet (and we'll have to redo the readout later on). + */ +int checkboard(void) +{ + hw_id_t hw_id_tmp; + char module_name_tmp[MODULE_NAME_MAXLEN] = ""; + + /* + * We need I2C to access HW ID data from EEPROM, so we call i2c_init() + * here despite the fact that it will be called again later on. We + * also use a little trick to silence I2C-related output. + */ + gd->flags |= GD_FLG_SILENT; + i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE); + gd->flags &= ~GD_FLG_SILENT; + + read_hw_id(hw_id_tmp); + identify_module(hw_id_tmp); /* this sets gd->board_type */ + compose_module_name(hw_id_tmp, module_name_tmp); + + if (gd->board_type != CM5200_UNKNOWN_MODULE) + printf("Board: %s\n", module_name_tmp); + else + printf("Board: unrecognized cm5200 module (%s)\n", + module_name_tmp); + + return 0; +} + + +int board_early_init_r(void) +{ + /* + * Now, when we are in RAM, enable flash write access for detection + * process. Note that CS_BOOT cannot be cleared when executing in + * flash. + */ + *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ + + /* Now that we can write to global data, read HW ID again. */ + read_hw_id(hw_id); + return 0; +} + + +#ifdef CONFIG_POST +int post_hotkeys_pressed(void) +{ + return 0; +} +#endif /* CONFIG_POST */ + + +#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER) +void post_word_store(ulong a) +{ + vu_long *save_addr = (vu_long *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE); + *save_addr = a; +} + + +ulong post_word_load(void) +{ + vu_long *save_addr = (vu_long *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE); + return *save_addr; +} +#endif /* CONFIG_POST || CONFIG_LOGBUFFER */ + + +#ifdef CONFIG_MISC_INIT_R +int misc_init_r(void) +{ +#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) + uchar buf[6]; + char str[18]; + char hostname[MODULE_NAME_MAXLEN]; + + /* Read ethaddr from EEPROM */ + if (i2c_read(CFG_I2C_EEPROM, CONFIG_MAC_OFFSET, 2, buf, 6) == 0) { + sprintf(str, "%02X:%02X:%02X:%02X:%02X:%02X", + buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]); + /* Check if MAC addr is owned by Schindler */ + if (strstr(str, "00:06:C3") != str) + printf(LOG_PREFIX "Warning - Illegal MAC address (%s)" + " in EEPROM.\n", str); + else { + printf(LOG_PREFIX "Using MAC (%s) from I2C EEPROM\n", + str); + setenv("ethaddr", str); + } + } else { + printf(LOG_PREFIX "Warning - Unable to read MAC from I2C" + " device at address %02X:%04X\n", CFG_I2C_EEPROM, + CONFIG_MAC_OFFSET); + } +#endif /* defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) */ + if (!getenv("ethaddr")) + printf(LOG_PREFIX "MAC address not set, networking is not " + "operational\n"); + + /* set the hostname appropriate to the module we're running on */ + compose_hostname(hw_id, hostname); + setenv("hostname", hostname); + + return 0; +} +#endif /* CONFIG_MISC_INIT_R */ + + +#ifdef CONFIG_LAST_STAGE_INIT +int last_stage_init(void) +{ +#ifdef CONFIG_USB_STORAGE + cm5200_fwupdate(); +#endif /* CONFIG_USB_STORAGE */ + return 0; +} +#endif /* CONFIG_LAST_STAGE_INIT */ + + +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ + ft_cpu_setup(blob, bd); + ft_blob_update(blob, bd); +} +#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/cm5200/cm5200.h b/board/cm5200/cm5200.h new file mode 100644 index 00000000000..a6cbc88f47c --- /dev/null +++ b/board/cm5200/cm5200.h @@ -0,0 +1,184 @@ +/* + * (C) Copyright 2007 DENX Software Engineering + * + * Author: Bartlomiej Sieka + * Author: Grzegorz Bernacki + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _CM5200_H +#define _CM5200_H + + +/* + * Definitions and declarations for the modules of the cm5200 platform. Mostly + * related to reading the hardware identification data (HW ID) from the I2C + * EEPROM, detection of the particular module we are executing on, and + * appropriate SDRAM controller initialization. + */ + + +#define CM5200_UNKNOWN_MODULE 0xffffffff + +enum { + DEVICE_NAME, /* 0 */ + GENERATION, /* 1 */ + PCB_NAME, /* 2 */ + FORM, /* 3 */ + VERSION, /* 4 */ + IDENTIFICATION_NUMBER, /* 5 */ + MAJOR_SW_VERSION, /* 6 */ + MINOR_SW_VERSION, /* 7 */ + /* add new alements above this line */ + HW_ID_ELEM_COUNT /* count */ +}; + +/* + * Sect. 4.1 "CM1.Q/CMU1.Q Supervisory Microcontroller Interface Definition" + */ + +#define DEVICE_NAME_OFFSET 0x02 +#define GENERATION_OFFSET 0x0b +#define PCB_NAME_OFFSET 0x0c +#define FORM_OFFSET 0x15 +#define VERSION_OFFSET 0x16 +#define IDENTIFICATION_NUMBER_OFFSET 0x19 +#define MAJOR_SW_VERSION_OFFSET 0x0480 +#define MINOR_SW_VERSION_OFFSET 0x0481 + + +#define DEVICE_NAME_LEN 0x09 +#define GENERATION_LEN 0x01 +#define PCB_NAME_LEN 0x09 +#define FORM_LEN 0x01 +#define VERSION_LEN 0x03 +#define IDENTIFICATION_NUMBER_LEN 0x09 +#define MAJOR_SW_VERSION_LEN 0x01 +#define MINOR_SW_VERSION_LEN 0x01 + +#define HW_ID_ELEM_MAXLEN 0x09 /* MAX(XXX_LEN) */ + +/* entire HW ID in EEPROM is 64 bytes, so longer module name is unlikely */ +#define MODULE_NAME_MAXLEN 64 + + +/* storage for HW ID read from EEPROM */ +typedef char hw_id_t[HW_ID_ELEM_COUNT][HW_ID_ELEM_MAXLEN]; + + +/* HW ID layout in EEPROM */ +static struct { + unsigned int offset; + unsigned int length; +} hw_id_format[HW_ID_ELEM_COUNT] = { + {DEVICE_NAME_OFFSET, DEVICE_NAME_LEN}, + {GENERATION_OFFSET, GENERATION_LEN}, + {PCB_NAME_OFFSET, PCB_NAME_LEN}, + {FORM_OFFSET, FORM_LEN}, + {VERSION_OFFSET, VERSION_LEN}, + {IDENTIFICATION_NUMBER_OFFSET, IDENTIFICATION_NUMBER_LEN}, + {MAJOR_SW_VERSION_OFFSET, MAJOR_SW_VERSION_LEN}, + {MINOR_SW_VERSION_OFFSET, MINOR_SW_VERSION_LEN}, +}; + + +/* HW ID data found in EEPROM on supported modules */ +static char *cm1_qa_hw_id[HW_ID_ELEM_COUNT] = { + "CM", /* DEVICE_NAME */ + "1", /* GENERATION */ + "CM1", /* PCB_NAME */ + "Q", /* FORM */ + "A", /* VERSION */ + "591881", /* IDENTIFICATION_NUMBER */ + "", /* MAJOR_SW_VERSION */ + "", /* MINOR_SW_VERSION */ +}; + +static char *cm11_qa_hw_id[HW_ID_ELEM_COUNT] = { + "CM", /* DEVICE_NAME */ + "1", /* GENERATION */ + "CM11", /* PCB_NAME */ + "Q", /* FORM */ + "A", /* VERSION */ + "594200", /* IDENTIFICATION_NUMBER */ + "", /* MAJOR_SW_VERSION */ + "", /* MINOR_SW_VERSION */ +}; + +static char *cmu1_qa_hw_id[HW_ID_ELEM_COUNT] = { + "CMU", /* DEVICE_NAME */ + "1", /* GENERATION */ + "CMU1", /* PCB_NAME */ + "Q", /* FORM */ + "A", /* VERSION */ + "594128", /* IDENTIFICATION_NUMBER */ + "", /* MAJOR_SW_VERSION */ + "", /* MINOR_SW_VERSION */ +}; + + +/* list of known modules */ +static char **hw_id_list[] = { + cm1_qa_hw_id, + cm11_qa_hw_id, + cmu1_qa_hw_id, +}; + +/* indices to the above list - keep in sync */ +enum { + CM1_QA, + CM11_QA, + CMU1_QA, +}; + + +/* identify modules based on these hw id elements */ +static int hw_id_identify[] = { + PCB_NAME, + FORM, + VERSION, +}; + + +/* Registers' settings for SDRAM controller intialization */ +typedef struct { + ulong mode; + ulong control; + ulong config1; + ulong config2; +} mem_conf_t; + +static mem_conf_t k4s561632E = { + 0x00CD0000, /* CASL 3, burst length 8 */ + 0x514F0000, + 0xE2333900, + 0x8EE70000 +}; + +static mem_conf_t mt48lc32m16a2 = { + 0x00CD0000, /* CASL 3, burst length 8 */ + 0x514F0000, + 0xD2322800, + 0x8AD70000 +}; + +static mem_conf_t* memory_config[] = { + &k4s561632E, + &mt48lc32m16a2 +}; + +#endif /* _CM5200_H */ diff --git a/board/cm5200/cmd_cm5200.c b/board/cm5200/cmd_cm5200.c new file mode 100644 index 00000000000..5119a99ca23 --- /dev/null +++ b/board/cm5200/cmd_cm5200.c @@ -0,0 +1,448 @@ +/* + * (C) Copyright 2007 Markus Kappeler + * + * Adapted for U-Boot 1.2 by Piotr Kruszynski + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include + +#if (CONFIG_COMMANDS & CFG_CMD_BSP) + +int do_i2c(char *argv[]) +{ + unsigned char temp, temp1; + + printf("Starting I2C Test\n" + "Please set Jumper:\nI2C SDA 2-3\nI2C SCL 2-3\n\n" + "Please press any key to start\n\n"); + getc(); + + temp = 0xf0; /* set io 0-4 as output */ + i2c_write(CFG_I2C_IO, 3, 1, (uchar *)&temp, 1); + + printf("Press I2C4-7. LED I2C0-3 should have the same state\n\n" + "Press any key to stop\n\n"); + + while (!tstc()) { + i2c_read(CFG_I2C_IO, 0, 1, (uchar *)&temp, 1); + temp1 = (temp >> 4) & 0x03; + temp1 |= (temp >> 3) & 0x08; /* S302 -> LED303 */ + temp1 |= (temp >> 5) & 0x04; /* S303 -> LED302 */ + temp = temp1; + i2c_write(CFG_I2C_IO, 1, 1, (uchar *)&temp, 1); + } + getc(); + + return 0; +} + +int do_usbtest(char *argv[]) +{ + int i; + static int usb_stor_curr_dev = -1; /* current device */ + + printf("Starting USB Test\n" + "Please insert USB Memmory Stick\n\n" + "Please press any key to start\n\n"); + getc(); + + usb_stop(); + printf("(Re)start USB...\n"); + i = usb_init(); +#ifdef CONFIG_USB_STORAGE + /* try to recognize storage devices immediately */ + if (i >= 0) + usb_stor_curr_dev = usb_stor_scan(1); +#endif /* CONFIG_USB_STORAGE */ + if (usb_stor_curr_dev >= 0) + printf("Found USB Storage Dev continue with Test...\n"); + else { + printf("No USB Storage Device detected.. Stop Test\n"); + return 1; + } + + usb_stor_info(); + + printf("stopping USB..\n"); + usb_stop(); + + return 0; +} + +int do_led(char *argv[]) +{ + int i = 0; + struct mpc5xxx_gpt_0_7 *gpt = (struct mpc5xxx_gpt_0_7 *)MPC5XXX_GPT; + + printf("Starting LED Test\n" + "Please set Switch S500 all off\n\n" + "Please press any key to start\n\n"); + getc(); + + /* configure timer 2-3 for simple GPIO output High */ + gpt->gpt2.emsr |= 0x00000034; + gpt->gpt3.emsr |= 0x00000034; + + (*(vu_long *)MPC5XXX_WU_GPIO_ENABLE) |= 0x80000000; + (*(vu_long *)MPC5XXX_WU_GPIO_DIR) |= 0x80000000; + printf("Please press any key to stop\n\n"); + while (!tstc()) { + if (i == 1) { + (*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) |= 0x80000000; + gpt->gpt2.emsr &= ~0x00000010; + gpt->gpt3.emsr &= ~0x00000010; + } else if (i == 2) { + (*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) &= ~0x80000000; + gpt->gpt2.emsr &= ~0x00000010; + gpt->gpt3.emsr |= 0x00000010; + } else if (i >= 3) { + (*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) &= ~0x80000000; + gpt->gpt3.emsr &= ~0x00000010; + gpt->gpt2.emsr |= 0x00000010; + i = 0; + } + i++; + udelay(200000); + } + getc(); + + (*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) |= 0x80000000; + gpt->gpt2.emsr |= 0x00000010; + gpt->gpt3.emsr |= 0x00000010; + + return 0; +} + +int do_rs232(char *argv[]) +{ + int error_status = 0; + struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO; + struct mpc5xxx_psc *psc1 = (struct mpc5xxx_psc *)MPC5XXX_PSC1; + + /* Configure PSC 2-3-6 as GPIO */ + gpio->port_config &= 0xFF0FF80F; + + switch (simple_strtoul(argv[2], NULL, 10)) { + case 1: + /* check RTS <-> CTS loop */ + /* set rts to 0 */ + printf("Uart 1 test: RX TX tested by using U-Boot\n" + "Please connect RTS with CTS on Uart1 plug\n\n" + "Press any key to start\n\n"); + getc(); + + psc1->op1 |= 0x01; + + /* wait some time before requesting status */ + udelay(10); + + /* check status at cts */ + if ((psc1->ip & 0x01) != 0) { + error_status = 3; + printf("%s: failure at rs232_1, cts status is %d " + "(should be 0)\n", + __FUNCTION__, (psc1->ip & 0x01)); + } + + /* set rts to 1 */ + psc1->op0 |= 0x01; + + /* wait some time before requesting status */ + udelay(10); + + /* check status at cts */ + if ((psc1->ip & 0x01) != 1) { + error_status = 3; + printf("%s: failure at rs232_1, cts status is %d " + "(should be 1)\n", + __FUNCTION__, (psc1->ip & 0x01)); + } + break; + case 2: + /* set PSC2_0, PSC2_2 as output and PSC2_1, PSC2_3 as input */ + printf("Uart 2 test: Please use RS232 Loopback plug on UART2\n" + "\nPress any key to start\n\n"); + getc(); + + gpio->simple_gpioe &= ~(0x000000F0); + gpio->simple_gpioe |= 0x000000F0; + gpio->simple_ddr &= ~(0x000000F0); + gpio->simple_ddr |= 0x00000050; + + /* check TXD <-> RXD loop */ + /* set TXD to 1 */ + gpio->simple_dvo |= (1 << 4); + + /* wait some time before requesting status */ + udelay(10); + + if ((gpio->simple_ival & 0x00000020) != 0x00000020) { + error_status = 2; + printf("%s: failure at rs232_2, rxd status is %d " + "(should be 1)\n", __FUNCTION__, + (gpio->simple_ival & 0x00000020) >> 5); + } + + /* set TXD to 0 */ + gpio->simple_dvo &= ~(1 << 4); + + /* wait some time before requesting status */ + udelay(10); + + if ((gpio->simple_ival & 0x00000020) != 0x00000000) { + error_status = 2; + printf("%s: failure at rs232_2, rxd status is %d " + "(should be 0)\n", __FUNCTION__, + (gpio->simple_ival & 0x00000020) >> 5); + } + + /* check RTS <-> CTS loop */ + /* set RTS to 1 */ + gpio->simple_dvo |= (1 << 6); + + /* wait some time before requesting status */ + udelay(10); + + if ((gpio->simple_ival & 0x00000080) != 0x00000080) { + error_status = 3; + printf("%s: failure at rs232_2, cts status is %d " + "(should be 1)\n", __FUNCTION__, + (gpio->simple_ival & 0x00000080) >> 7); + } + + /* set RTS to 0 */ + gpio->simple_dvo &= ~(1 << 6); + + /* wait some time before requesting status */ + udelay(10); + + if ((gpio->simple_ival & 0x00000080) != 0x00000000) { + error_status = 3; + printf("%s: failure at rs232_2, cts status is %d " + "(should be 0)\n", __FUNCTION__, + (gpio->simple_ival & 0x00000080) >> 7); + } + break; + case 3: + /* set PSC3_0, PSC3_2 as output and PSC3_1, PSC3_3 as input */ + printf("Uart 3 test: Please use RS232 Loopback plug on UART2\n" + "\nPress any key to start\n\n"); + getc(); + + gpio->simple_gpioe &= ~(0x00000F00); + gpio->simple_gpioe |= 0x00000F00; + + gpio->simple_ddr &= ~(0x00000F00); + gpio->simple_ddr |= 0x00000500; + + /* check TXD <-> RXD loop */ + /* set TXD to 1 */ + gpio->simple_dvo |= (1 << 8); + + /* wait some time before requesting status */ + udelay(10); + + if ((gpio->simple_ival & 0x00000200) != 0x00000200) { + error_status = 2; + printf("%s: failure at rs232_3, rxd status is %d " + "(should be 1)\n", __FUNCTION__, + (gpio->simple_ival & 0x00000200) >> 9); + } + + /* set TXD to 0 */ + gpio->simple_dvo &= ~(1 << 8); + + /* wait some time before requesting status */ + udelay(10); + + if ((gpio->simple_ival & 0x00000200) != 0x00000000) { + error_status = 2; + printf("%s: failure at rs232_3, rxd status is %d " + "(should be 0)\n", __FUNCTION__, + (gpio->simple_ival & 0x00000200) >> 9); + } + + /* check RTS <-> CTS loop */ + /* set RTS to 1 */ + gpio->simple_dvo |= (1 << 10); + + /* wait some time before requesting status */ + udelay(10); + + if ((gpio->simple_ival & 0x00000800) != 0x00000800) { + error_status = 3; + printf("%s: failure at rs232_3, cts status is %d " + "(should be 1)\n", __FUNCTION__, + (gpio->simple_ival & 0x00000800) >> 11); + } + + /* set RTS to 0 */ + gpio->simple_dvo &= ~(1 << 10); + + /* wait some time before requesting status */ + udelay(10); + + if ((gpio->simple_ival & 0x00000800) != 0x00000000) { + error_status = 3; + printf("%s: failure at rs232_3, cts status is %d " + "(should be 0)\n", __FUNCTION__, + (gpio->simple_ival & 0x00000800) >> 11); + } + break; + case 4: + /* set PSC6_2, PSC6_3 as output and PSC6_0, PSC6_1 as input */ + printf("Uart 4 test: Please use RS232 Loopback plug on UART2\n" + "\nPress any key to start\n\n"); + getc(); + + gpio->simple_gpioe &= ~(0xF0000000); + gpio->simple_gpioe |= 0x30000000; + + gpio->simple_ddr &= ~(0xf0000000); + gpio->simple_ddr |= 0x30000000; + + (*(vu_long *)MPC5XXX_WU_GPIO_ENABLE) |= 0x30000000; + (*(vu_long *)MPC5XXX_WU_GPIO_DIR) &= ~(0x30000000); + + /* check TXD <-> RXD loop */ + /* set TXD to 1 */ + gpio->simple_dvo |= (1 << 28); + + /* wait some time before requesting status */ + udelay(10); + + if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x10000000) != + 0x10000000) { + error_status = 2; + printf("%s: failure at rs232_4, rxd status is %d " + "(should be 1)\n", __FUNCTION__, + ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & + 0x10000000) >> 28); + } + + /* set TXD to 0 */ + gpio->simple_dvo &= ~(1 << 28); + + /* wait some time before requesting status */ + udelay(10); + + if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x10000000) != + 0x00000000) { + error_status = 2; + printf("%s: failure at rs232_4, rxd status is %d " + "(should be 0)\n", __FUNCTION__, + ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & + 0x10000000) >> 28); + } + + /* check RTS <-> CTS loop */ + /* set RTS to 1 */ + gpio->simple_dvo |= (1 << 29); + + /* wait some time before requesting status */ + udelay(10); + + if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x20000000) != + 0x20000000) { + error_status = 3; + printf("%s: failure at rs232_4, cts status is %d " + "(should be 1)\n", __FUNCTION__, + ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & + 0x20000000) >> 29); + } + + /* set RTS to 0 */ + gpio->simple_dvo &= ~(1 << 29); + + /* wait some time before requesting status */ + udelay(10); + + if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x20000000) != + 0x00000000) { + error_status = 3; + printf("%s: failure at rs232_4, cts status is %d " + "(should be 0)\n", __FUNCTION__, + ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & + 0x20000000) >> 29); + } + break; + default: + printf("%s: invalid rs232 number %s\n", __FUNCTION__, argv[2]); + error_status = 1; + break; + } + gpio->port_config |= (CFG_GPS_PORT_CONFIG & 0xFF0FF80F); + + return error_status; +} + +int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + int rcode = -1; + + switch (argc) { + case 2: + if (strncmp(argv[1], "i2c", 3) == 0) + rcode = do_i2c(argv); + else if (strncmp(argv[1], "led", 3) == 0) + rcode = do_led(argv); + else if (strncmp(argv[1], "usb", 3) == 0) + rcode = do_usbtest(argv); + break; + case 3: + if (strncmp(argv[1], "rs232", 3) == 0) + rcode = do_rs232(argv); + break; + } + + switch (rcode) { + case -1: + printf("Usage:\n" + "fkt { i2c | led | usb }\n" + "fkt rs232 number\n"); + rcode = 1; + break; + case 0: + printf("Test passed\n"); + break; + default: + printf("Test failed with code: %d\n", rcode); + } + + return rcode; +} + +U_BOOT_CMD( + fkt, 4, 1, cmd_fkt, + "fkt - Function test routines\n", + "i2c\n" + " - Test I2C communication\n" + "fkt led\n" + " - Test LEDs\n" + "fkt rs232 number\n" + " - Test RS232 (loopback plug(s) for RS232 required)\n" + "fkt usb\n" + " - Test USB communication\n" +); +#endif /* CFG_CMD_BSP */ diff --git a/board/cm5200/config.mk b/board/cm5200/config.mk new file mode 100644 index 00000000000..7f061391a24 --- /dev/null +++ b/board/cm5200/config.mk @@ -0,0 +1,26 @@ +# +# (C) Copyright 2007 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0xfc000000 + +PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board diff --git a/board/cm5200/fwupdate.c b/board/cm5200/fwupdate.c new file mode 100644 index 00000000000..19aa94a5a03 --- /dev/null +++ b/board/cm5200/fwupdate.c @@ -0,0 +1,200 @@ +/* + * (C) Copyright 2007 Schindler Lift Inc. + * (C) Copyright 2007 DENX Software Engineering + * + * Author: Michel Marti + * Adapted for U-Boot 1.2 by Piotr Kruszynski : + * - code clean-up + * - bugfix for overwriting bootargs by user + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#include "fwupdate.h" + +extern int do_bootm(cmd_tbl_t *, int, int, char *[]); +extern long do_fat_read(const char *, void *, unsigned long, int); +extern int do_fat_fsload(cmd_tbl_t *, int, int, char *[]); + +static int load_rescue_image(ulong); + +void cm5200_fwupdate(void) +{ + cmd_tbl_t *bcmd; + char *rsargs; + char *tmp = NULL; + char ka[16]; + char *argv[3] = { "bootm", ka, NULL }; + + /* Check if rescue system is disabled... */ + if (getenv("norescue")) { + printf(LOG_PREFIX "Rescue System disabled.\n"); + return; + } + + /* Check if we have a USB storage device and load image */ + if (load_rescue_image(LOAD_ADDR)) + return; + + bcmd = find_cmd("bootm"); + if (!bcmd) + return; + + sprintf(ka, "%lx", LOAD_ADDR); + + /* prepare our bootargs */ + rsargs = getenv("rs-args"); + if (!rsargs) + rsargs = RS_BOOTARGS; + else { + tmp = malloc(strlen(rsargs+1)); + if (!tmp) { + printf(LOG_PREFIX "Memory allocation failed\n"); + return; + } + strcpy(tmp, rsargs); + rsargs = tmp; + } + + setenv("bootargs", rsargs); + + if (rsargs == tmp) + free(rsargs); + + printf(LOG_PREFIX "Starting update system (bootargs=%s)...\n", rsargs); + do_bootm(bcmd, 0, 2, argv); +} + +static int load_rescue_image(ulong addr) +{ + disk_partition_t info; + int devno; + int partno; + int i; + char fwdir[64]; + char nxri[128]; + char *tmp; + char dev[7]; + char addr_str[16]; + char *argv[6] = { "fatload", "usb", dev, addr_str, nxri, NULL }; + block_dev_desc_t *stor_dev = NULL; + cmd_tbl_t *bcmd; + + /* Get name of firmware directory */ + tmp = getenv("fw-dir"); + + /* Copy it into fwdir */ + strncpy(fwdir, tmp ? tmp : FW_DIR, sizeof(fwdir)); + fwdir[sizeof(fwdir) - 1] = 0; /* Terminate string */ + + printf(LOG_PREFIX "Checking for firmware image directory '%s' on USB" + " storage...\n", fwdir); + usb_stop(); + if (usb_init() != 0) + return 1; + + /* Check for storage device */ + if (usb_stor_scan(1) != 0) { + usb_stop(); + return 1; + } + + /* Detect storage device */ + for (devno = 0; devno < USB_MAX_STOR_DEV; devno++) { + stor_dev = usb_stor_get_dev(devno); + if (stor_dev->type != DEV_TYPE_UNKNOWN) + break; + } + if (!stor_dev || stor_dev->type == DEV_TYPE_UNKNOWN) { + printf(LOG_PREFIX "No valid storage device found...\n"); + usb_stop(); + return 1; + } + + /* Detect partition */ + for (partno = -1, i = 0; i < 6; i++) { + if (get_partition_info(stor_dev, i, &info) == 0) { + if (fat_register_device(stor_dev, i) == 0) { + /* Check if rescue image is present */ + FW_DEBUG("Looking for firmware directory '%s'" + " on partition %d\n", fwdir, i); + if (do_fat_read(fwdir, NULL, 0, LS_NO) == -1) { + FW_DEBUG("No NX rescue image on " + "partition %d.\n", i); + partno = -2; + } else { + partno = i; + FW_DEBUG("Partition %d contains " + "firmware directory\n", partno); + break; + } + } + } + } + + if (partno < 0) { + switch (partno) { + case -1: + printf(LOG_PREFIX "Error: No valid (FAT) partition " + "detected\n"); + break; + case -2: + printf(LOG_PREFIX "Error: No NX rescue image on FAT " + "partition\n"); + break; + default: + printf(LOG_PREFIX "Error: Failed with code %d\n", + partno); + } + usb_stop(); + return 1; + } + + /* Load the rescue image */ + bcmd = find_cmd("fatload"); + if (!bcmd) { + printf(LOG_PREFIX "Error - 'fatload' command not present.\n"); + usb_stop(); + return 1; + } + + tmp = getenv("nx-rescue-image"); + sprintf(nxri, "%s/%s", fwdir, tmp ? tmp : RESCUE_IMAGE); + sprintf(dev, "%d:%d", devno, partno); + sprintf(addr_str, "%lx", addr); + + FW_DEBUG("fat_fsload device='%s', addr='%s', file: %s\n", + dev, addr_str, nxri); + + if (do_fat_fsload(bcmd, 0, 5, argv) != 0) { + usb_stop(); + return 1; + } + + /* Stop USB */ + usb_stop(); + return 0; +} diff --git a/board/cm5200/fwupdate.h b/board/cm5200/fwupdate.h new file mode 100644 index 00000000000..4e3f1e164aa --- /dev/null +++ b/board/cm5200/fwupdate.h @@ -0,0 +1,47 @@ +/* + * (C) Copyright 2007 Schindler Lift Inc. + * + * Author: Michel Marti + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __FW_UPDATE_H +#define __FW_UPDATE_H + +/* Default prefix for output messages */ +#define LOG_PREFIX "CM5200:" + +/* Extra debug macro */ +#ifdef CONFIG_FWUPDATE_DEBUG +#define FW_DEBUG(fmt...) printf(LOG_PREFIX fmt) +#else +#define FW_DEBUG(fmt...) +#endif + +/* Name of the directory holding firmware images */ +#define FW_DIR "nx-fw" +#define RESCUE_IMAGE "nxrs.img" +#define LOAD_ADDR 0x400000 +#define RS_BOOTARGS "ramdisk=8192K" + +/* Main function for fwupdate */ +void cm5200_fwupdate(void); + +#endif /* __FW_UPDATE_H */ diff --git a/board/cm5200/u-boot.lds b/board/cm5200/u-boot.lds new file mode 100644 index 00000000000..8fa9c0f7ed5 --- /dev/null +++ b/board/cm5200/u-boot.lds @@ -0,0 +1,123 @@ +/* + * (C) Copyright 2003-2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/mpc5xxx/start.o (.text) + *(.text) + *(.fixup) + *(.got1) + . = ALIGN(16); + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x0FFF) & 0xFFFFF000; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __fixup_entries = (. - _FIXUP_TABLE_) >> 2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(4096); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(4096); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/cpu/mpc5xxx/fec.c b/cpu/mpc5xxx/fec.c index 3d99d5c1ec6..2b5b5278dcf 100644 --- a/cpu/mpc5xxx/fec.c +++ b/cpu/mpc5xxx/fec.c @@ -890,7 +890,7 @@ int mpc5xxx_fec_initialize(bd_t * bis) fec->tbdBase = (FEC_TBD *)FEC_BD_BASE; fec->rbdBase = (FEC_RBD *)(FEC_BD_BASE + FEC_TBD_NUM * sizeof(FEC_TBD)); #if defined(CONFIG_CANMB) || \ - defined(CONFIG_CM1_QP1) || \ + defined(CONFIG_CM5200) || \ defined(CONFIG_HMI1001) || \ defined(CONFIG_ICECUBE) || \ defined(CONFIG_INKA4X0) || \ diff --git a/include/configs/cm1_qp1.h b/include/configs/cm1_qp1.h deleted file mode 100644 index effa41c0525..00000000000 --- a/include/configs/cm1_qp1.h +++ /dev/null @@ -1,358 +0,0 @@ -/* - * (C) Copyright 2003-2007 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ -#define CONFIG_CM1_QP1 1 /* ... on CM1.QP1 module */ - - -/* - * Supported commands - */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_ECHO | \ - CFG_CMD_I2C | \ - CFG_CMD_FLASH | \ - CFG_CMD_MII | \ - CFG_CMD_NFS | \ - CFG_CMD_PING | \ - CFG_CMD_DIAG | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SNTP | \ - CFG_CMD_BSP | \ - CFG_CMD_USB | \ - CFG_CMD_FAT | \ - CFG_CMD_JFFS2) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include - - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#define CONFIG_BAUDRATE 57600 /* ... at 57600 bps */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC 1 -#define CONFIG_PHY_ADDR 0x00 -#define CONFIG_ENV_OVERWRITE 1 /* allow overwriting of ethaddr */ -/* use misc_init_r() to read ethaddr from I2C EEPROM (see CFG_I2C_EEPROM) */ -#define CONFIG_MISC_INIT_R 1 -#define CONFIG_MAC_OFFSET 0x35 /* MAC address offset in I2C EEPROM */ - - -/* - * POST support - */ -#define CONFIG_POST (CFG_POST_MEMORY | CFG_POST_CPU | CFG_POST_I2C) -#define MPC5XXX_SRAM_POST_SIZE (MPC5XXX_SRAM_SIZE - 4) -/* List of I2C addresses to be verified by POST */ -#define I2C_ADDR_LIST { CFG_I2C_SLAVE, CFG_I2C_IO, CFG_I2C_EEPROM } - - -/* display image timestamps */ -#define CONFIG_TIMESTAMP 1 - - -/* - * Autobooting - */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#define CONFIG_PREBOOT "echo;" \ - "echo Type \"run net_nfs_fdt\" to mount root filesystem over NFS;" \ - "echo" -#undef CONFIG_BOOTARGS - -/* - * Default environment settings - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "hostname=cm1_qp1\0" \ - "netmask=255.255.0.0\0" \ - "ipaddr=192.168.160.33\0" \ - "serverip=192.168.1.1\0" \ - "gatewayip=192.168.1.1\0" \ - "console=ttyPSC0\0" \ - "u-boot_addr=100000\0" \ - "kernel_addr=200000\0" \ - "kernel_addr_flash=fc0c0000\0" \ - "fdt_addr=400000\0" \ - "fdt_addr_flash=fc0a0000\0" \ - "ramdisk_addr=500000\0" \ - "rootpath=/opt/eldk-4.1/ppc_6xx\0" \ - "u-boot=/tftpboot/cm1_qp1/u-boot.bin\0" \ - "bootfile=/tftpboot/cm1_qp1/uImage\0" \ - "fdt_file=/tftpboot/cm1_qp1/cm1_qp1.dtb\0" \ - "load=tftp ${u-boot_addr} ${u-boot}\0" \ - "update=prot off fc000000 fc05ffff; era fc000000 fc05ffff; " \ - "cp.b ${u-boot_addr} fc000000 ${filesize}; " \ - "prot on fc000000 fc05ffff\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "flashargs=setenv bootargs root=/dev/mtdblock5 rw\0" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "addinit=setenv bootargs ${bootargs} init=/linuxrc\0" \ - "addcons=setenv bootargs ${bootargs} " \ - "console=${console},${baudrate}\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:" \ - "${netmask}:${hostname}:${netdev}:off panic=1\0" \ - "flash_flash=run flashargs addinit addip addcons;" \ - "bootm ${kernel_addr_flash} - ${fdt_addr_flash}\0" \ - "net_nfs_fdt=tftp ${kernel_addr} ${bootfile_fdt}; " \ - "tftp ${fdt_addr} ${fdt_file}; run nfsargs addip " \ - "addcons; bootm ${kernel_addr} - ${fdt_addr}\0" \ - "" -#define CONFIG_BOOTCOMMAND "run flash_flash" - - -/* - * Low level configuration - */ - - -/* - * Clock configuration - */ -#define CFG_MPC5XXX_CLKIN 33000000 /* SYS_XTAL_IN = 33MHz */ -#define CFG_IPBCLK_EQUALS_XLBCLK 1 /* IPB = 133MHz */ - - -/* - * Memory map - */ -#define CFG_MBAR 0xF0000000 -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_DEFAULT_MBAR 0x80000000 - -#define CFG_LOWBOOT 1 - -/* Use ON-Chip SRAM until RAM will be available */ -#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM -#ifdef CONFIG_POST -/* preserve space for the post_word at end of on-chip SRAM */ -#define CFG_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE -#else -#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE -#endif - -#define CFG_GBL_DATA_SIZE 128 /* size in bytes for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET - -#define CFG_MONITOR_BASE TEXT_BASE -#define CFG_MONITOR_LEN (384 << 10) /* 384 kB for Monitor */ -#define CFG_MALLOC_LEN (256 << 10) /* 256 kB for malloc() */ -#define CFG_BOOTMAPSZ (8 << 20) /* initial mem map for Linux */ - -#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) -#define CFG_RAMBOOT 1 -#endif - - -/* - * Chip selects configuration - */ -/* Boot Chipselect */ -#define CFG_BOOTCS_START CFG_FLASH_BASE -#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE -#define CFG_BOOTCS_CFG 0x00087D31 /* for pci_clk = 33 MHz */ -/* use board_early_init_r to enable flash write in CS_BOOT */ -#define CONFIG_BOARD_EARLY_INIT_R - -/* Flash memory addressing */ -#define CFG_CS0_START CFG_FLASH_BASE -#define CFG_CS0_SIZE CFG_FLASH_SIZE - -/* No burst, dead cycle = 1 for CS0 (Flash) */ -#define CFG_CS_BURST 0x00000000 -#define CFG_CS_DEADCYCLE 0x00000001 - - -/* - * SDRAM configuration - * settings for k4s561632E-xx75, assuming XLB = 132 MHz - */ -#define SDRAM_MODE 0x00CD0000 /* CASL 3, burst length 8 */ -#define SDRAM_CONTROL 0x514F0000 -#define SDRAM_CONFIG1 0xE2333900 -#define SDRAM_CONFIG2 0x8EE70000 - - -/* - * Flash configuration - */ -#define CFG_FLASH_CFI 1 -#define CFG_FLASH_CFI_DRIVER 1 -#define CFG_FLASH_BASE TEXT_BASE -/* we need these despite using CFI */ -#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */ -#define CFG_MAX_FLASH_SECT 256 /* max num of sectors on one chip */ -#define CFG_FLASH_SIZE 0x02000000 /* 32 MiB */ - - -/* - * MTD configuration - */ -#define CONFIG_JFFS2_CMDLINE 1 -#define MTDIDS_DEFAULT "nor0=cm1qp1-0" -#define MTDPARTS_DEFAULT "mtdparts=cm1qp1-0:" \ - "384k(uboot),128k(env)," \ - "128k(redund_env),128k(dtb)," \ - "2m(kernel),27904k(rootfs)," \ - "-(config)" - - -/* - * I2C configuration - */ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CFG_I2C_MODULE 2 /* Select I2C module #2 */ -#define CFG_I2C_SPEED 40000 /* 40 kHz */ -#define CFG_I2C_SLAVE 0x0 -#define CFG_I2C_IO 0x38 /* PCA9554AD I2C I/O port address */ -#define CFG_I2C_EEPROM 0x53 /* I2C EEPROM device address */ - - -/* - * RTC configuration - */ -#define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */ - - -/* - * USB configuration - */ -#define CONFIG_USB_OHCI 1 -#define CONFIG_USB_STORAGE 1 -#define CONFIG_USB_CLOCK 0x0001BBBB -#define CONFIG_USB_CONFIG 0x00001000 -/* Partitions (for USB) */ -#define CONFIG_MAC_PARTITION 1 -#define CONFIG_DOS_PARTITION 1 -#define CONFIG_ISO_PARTITION 1 - -/* - * Invoke our last_stage_init function - needed by fwupdate - */ -#define CONFIG_LAST_STAGE_INIT 1 - -/* - * Environment settings - */ -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_SIZE 0x10000 -#define CFG_ENV_SECT_SIZE 0x20000 -#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN) -/* Configuration of redundant environment */ -#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) -#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) - - -/* - * Pin multiplexing configuration - */ - -/* - * CS1/GPIO_WKUP_6: GPIO (default) - * ALTs: CAN1 on I2C1, CAN2 on TIMER0/1 - * IRDA/PSC6: UART - * Ether: Ethernet 100Mbit with MD - * PCI_DIS: PCI controller disabled - * USB: USB - * PSC3: SPI with UART3 - * PSC2: UART - * PSC1: UART - */ -#define CFG_GPS_PORT_CONFIG 0x10559C44 - - -/* - * Miscellaneous configurable options - */ -#define CFG_LONGHELP 1 /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ - -#define CFG_ALT_MEMTEST 1 -#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ -#define CFG_MEMTEST_END 0x03f00000 /* 1 .. 63 MiB in SDRAM */ - -#define CONFIG_LOOPW 1 - -#define CFG_LOAD_ADDR 0x100000 /* default load address */ -#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ - - -/* - * Various low-level settings - */ -#define CFG_HID0_INIT HID0_ICE | HID0_ICFI -#define CFG_HID0_FINAL HID0_ICE - -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ - -#define CFG_XLB_PIPELINING 1 /* enable transaction pipeling */ - - -/* - * Cache Configuration - */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - - -/* - * Flat Device Tree support - */ -#define CONFIG_OF_FLAT_TREE 1 -#define CONFIG_OF_BOARD_SETUP 1 -#define OF_FLAT_TREE_MAX_SIZE 8192 /* max size of the flat tree (8K) */ -#define OF_CPU "PowerPC,5200@0" -#define OF_SOC "soc5200@f0000000" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" - -#endif /* __CONFIG_H */ diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h new file mode 100644 index 00000000000..76628560e5a --- /dev/null +++ b/include/configs/cm5200.h @@ -0,0 +1,362 @@ +/* + * (C) Copyright 2003-2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_CM5200 1 /* ... on CM5200 platform */ + + +/* + * Supported commands + */ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DATE | \ + CFG_CMD_DHCP | \ + CFG_CMD_ECHO | \ + CFG_CMD_I2C | \ + CFG_CMD_FLASH | \ + CFG_CMD_MII | \ + CFG_CMD_NFS | \ + CFG_CMD_PING | \ + CFG_CMD_DIAG | \ + CFG_CMD_REGINFO | \ + CFG_CMD_SNTP | \ + CFG_CMD_BSP | \ + CFG_CMD_USB | \ + CFG_CMD_FAT | \ + CFG_CMD_JFFS2) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + + +/* + * Serial console configuration + */ +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +#define CONFIG_BAUDRATE 57600 /* ... at 57600 bps */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } +#define CONFIG_SILENT_CONSOLE 1 /* needed to silence i2c_init() */ + + +/* + * Ethernet configuration + */ +#define CONFIG_MPC5xxx_FEC 1 +#define CONFIG_PHY_ADDR 0x00 +#define CONFIG_ENV_OVERWRITE 1 /* allow overwriting of ethaddr */ +/* use misc_init_r() to read ethaddr from I2C EEPROM (see CFG_I2C_EEPROM) */ +#define CONFIG_MISC_INIT_R 1 +#define CONFIG_MAC_OFFSET 0x35 /* MAC address offset in I2C EEPROM */ + + +/* + * POST support + */ +#define CONFIG_POST (CFG_POST_MEMORY | CFG_POST_CPU | CFG_POST_I2C) +#define MPC5XXX_SRAM_POST_SIZE (MPC5XXX_SRAM_SIZE - 4) +/* List of I2C addresses to be verified by POST */ +#define I2C_ADDR_LIST { CFG_I2C_SLAVE, CFG_I2C_IO, CFG_I2C_EEPROM } + + +/* display image timestamps */ +#define CONFIG_TIMESTAMP 1 + + +/* + * Autobooting + */ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run net_nfs_fdt\" to mount root filesystem over NFS;" \ + "echo" +#undef CONFIG_BOOTARGS + +/* + * Default environment settings + */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "netmask=255.255.0.0\0" \ + "ipaddr=192.168.160.33\0" \ + "serverip=192.168.1.1\0" \ + "gatewayip=192.168.1.1\0" \ + "console=ttyPSC0\0" \ + "u-boot_addr=100000\0" \ + "kernel_addr=200000\0" \ + "kernel_addr_flash=fc0c0000\0" \ + "fdt_addr=400000\0" \ + "fdt_addr_flash=fc0a0000\0" \ + "ramdisk_addr=500000\0" \ + "rootpath=/opt/eldk-4.1/ppc_6xx\0" \ + "u-boot=/tftpboot/cm5200/u-boot.bin\0" \ + "bootfile_fdt=/tftpboot/cm5200/uImage\0" \ + "fdt_file=/tftpboot/cm5200/cm5200.dtb\0" \ + "load=tftp ${u-boot_addr} ${u-boot}\0" \ + "update=prot off fc000000 +${filesize}; " \ + "era fc000000 +${filesize}; " \ + "cp.b ${u-boot_addr} fc000000 ${filesize}; " \ + "prot on fc000000 +${filesize}\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "flashargs=setenv bootargs root=/dev/mtdblock5 rw\0" \ + "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "addinit=setenv bootargs ${bootargs} init=/linuxrc\0" \ + "addcons=setenv bootargs ${bootargs} " \ + "console=${console},${baudrate}\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:" \ + "${netmask}:${hostname}:${netdev}:off panic=1\0" \ + "flash_flash=run flashargs addinit addip addcons;" \ + "bootm ${kernel_addr_flash} - ${fdt_addr_flash}\0" \ + "net_nfs_fdt=tftp ${kernel_addr} ${bootfile_fdt}; " \ + "tftp ${fdt_addr} ${fdt_file}; run nfsargs addip " \ + "addcons; bootm ${kernel_addr} - ${fdt_addr}\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_flash" + + +/* + * Low level configuration + */ + + +/* + * Clock configuration + */ +#define CFG_MPC5XXX_CLKIN 33000000 /* SYS_XTAL_IN = 33MHz */ +#define CFG_IPBCLK_EQUALS_XLBCLK 1 /* IPB = 133MHz */ + + +/* + * Memory map + */ +#define CFG_MBAR 0xF0000000 +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_DEFAULT_MBAR 0x80000000 + +#define CFG_LOWBOOT 1 + +/* Use ON-Chip SRAM until RAM will be available */ +#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM +#ifdef CONFIG_POST +/* preserve space for the post_word at end of on-chip SRAM */ +#define CFG_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE +#else +#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE +#endif + +#define CFG_GBL_DATA_SIZE 128 /* size in bytes for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CONFIG_BOARD_TYPES 1 /* we use board_type */ + +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MONITOR_LEN (384 << 10) /* 384 kB for Monitor */ +#define CFG_MALLOC_LEN (256 << 10) /* 256 kB for malloc() */ +#define CFG_BOOTMAPSZ (8 << 20) /* initial mem map for Linux */ + +/* + * Flash configuration + */ +#define CFG_FLASH_CFI 1 +#define CFG_FLASH_CFI_DRIVER 1 +#define CFG_FLASH_BASE 0xfc000000 +/* we need these despite using CFI */ +#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */ +#define CFG_MAX_FLASH_SECT 256 /* max num of sectors on one chip */ +#define CFG_FLASH_SIZE 0x02000000 /* 32 MiB */ + + +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT 1 +#undef CFG_LOWBOOT +#endif + + +/* + * Chip selects configuration + */ +/* Boot Chipselect */ +#define CFG_BOOTCS_START CFG_FLASH_BASE +#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE +#define CFG_BOOTCS_CFG 0x00087D31 /* for pci_clk = 33 MHz */ +/* use board_early_init_r to enable flash write in CS_BOOT */ +#define CONFIG_BOARD_EARLY_INIT_R + +/* Flash memory addressing */ +#define CFG_CS0_START CFG_FLASH_BASE +#define CFG_CS0_SIZE CFG_FLASH_SIZE + +/* No burst, dead cycle = 1 for CS0 (Flash) */ +#define CFG_CS_BURST 0x00000000 +#define CFG_CS_DEADCYCLE 0x00000001 + + +/* + * SDRAM configuration + * settings for k4s561632E-xx75, assuming XLB = 132 MHz + */ +#define SDRAM_MODE 0x00CD0000 /* CASL 3, burst length 8 */ +#define SDRAM_CONTROL 0x514F0000 +#define SDRAM_CONFIG1 0xE2333900 +#define SDRAM_CONFIG2 0x8EE70000 + + + +/* + * MTD configuration + */ +#define CONFIG_JFFS2_CMDLINE 1 +#define MTDIDS_DEFAULT "nor0=cm5200-0" +#define MTDPARTS_DEFAULT "mtdparts=cm5200-0:" \ + "384k(uboot),128k(env)," \ + "128k(redund_env),128k(dtb)," \ + "2m(kernel),27904k(rootfs)," \ + "-(config)" + + +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CFG_I2C_MODULE 2 /* Select I2C module #2 */ +#define CFG_I2C_SPEED 40000 /* 40 kHz */ +#define CFG_I2C_SLAVE 0x0 +#define CFG_I2C_IO 0x38 /* PCA9554AD I2C I/O port address */ +#define CFG_I2C_EEPROM 0x53 /* I2C EEPROM device address */ + + +/* + * RTC configuration + */ +#define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */ + + +/* + * USB configuration + */ +#define CONFIG_USB_OHCI 1 +#define CONFIG_USB_STORAGE 1 +#define CONFIG_USB_CLOCK 0x0001BBBB +#define CONFIG_USB_CONFIG 0x00001000 +/* Partitions (for USB) */ +#define CONFIG_MAC_PARTITION 1 +#define CONFIG_DOS_PARTITION 1 +#define CONFIG_ISO_PARTITION 1 + +/* + * Invoke our last_stage_init function - needed by fwupdate + */ +#define CONFIG_LAST_STAGE_INIT 1 + +/* + * Environment settings + */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SIZE 0x10000 +#define CFG_ENV_SECT_SIZE 0x20000 +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN) +/* Configuration of redundant environment */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + + +/* + * Pin multiplexing configuration + */ + +/* + * CS1/GPIO_WKUP_6: GPIO (default) + * ALTs: CAN1 on I2C1, CAN2 on TIMER0/1 + * IRDA/PSC6: UART + * Ether: Ethernet 100Mbit with MD + * PCI_DIS: PCI controller disabled + * USB: USB + * PSC3: SPI with UART3 + * PSC2: UART + * PSC1: UART + */ +#define CFG_GPS_PORT_CONFIG 0x10559C44 + + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP 1 /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_ALT_MEMTEST 1 +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x03f00000 /* 1 .. 63 MiB in SDRAM */ + +#define CONFIG_LOOPW 1 + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + + +/* + * Various low-level settings + */ +#define CFG_HID0_INIT HID0_ICE | HID0_ICFI +#define CFG_HID0_FINAL HID0_ICE + +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_XLB_PIPELINING 1 /* enable transaction pipeling */ + + +/* + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + + +/* + * Flat Device Tree support + */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define OF_CPU "PowerPC,5200@0" +#define OF_SOC "soc5200@f0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" + +#endif /* __CONFIG_H */ -- cgit v1.3.1 From 0f460a1ee148b648ee242c3157650287d4296260 Mon Sep 17 00:00:00 2001 From: Jason Jin Date: Fri, 13 Jul 2007 12:14:58 +0800 Subject: Configurations for ATI video card BIOS emulator This patch add definition of the BIOS emulator and the ATI framebuffer driver for MPC8641HPCN board. Signed-off-by: Jason Jin Signed-off-by: Zhang Wei --- Makefile | 1 + board/mpc8641hpcn/u-boot.lds | 1 + include/configs/MPC8641HPCN.h | 28 +++++++++++++++++++++++++--- 3 files changed, 27 insertions(+), 3 deletions(-) (limited to 'Makefile') diff --git a/Makefile b/Makefile index 4fdd485fb73..20aa9c26f1a 100644 --- a/Makefile +++ b/Makefile @@ -205,6 +205,7 @@ LIBS += disk/libdisk.a LIBS += rtc/librtc.a LIBS += dtt/libdtt.a LIBS += drivers/libdrivers.a +LIBS += drivers/bios_emulator/libatibiosemu.a LIBS += drivers/nand/libnand.a LIBS += drivers/nand_legacy/libnand_legacy.a ifeq ($(CPU),mpc83xx) diff --git a/board/mpc8641hpcn/u-boot.lds b/board/mpc8641hpcn/u-boot.lds index e4792ef1998..58644648c78 100644 --- a/board/mpc8641hpcn/u-boot.lds +++ b/board/mpc8641hpcn/u-boot.lds @@ -61,6 +61,7 @@ SECTIONS lib_generic/crc32.o (.text) lib_ppc/extable.o (.text) lib_generic/zlib.o (.text) + drivers/bios_emulator/atibios.o (.text) *(.text) *(.fixup) *(.got1) diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 5a511e53244..888af530c24 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -240,7 +240,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET #define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ -#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ +#define CFG_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ /* Serial Port */ #define CONFIG_CONS_INDEX 1 @@ -344,6 +344,26 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */ #endif +/*PCIE video card used*/ +#define VIDEO_IO_OFFSET CFG_PCI2_IO_PHYS + +/*PCI video card used*/ +/*#define VIDEO_IO_OFFSET CFG_PCI1_IO_PHYS*/ + +/* video */ +#define CONFIG_VIDEO + +#if defined(CONFIG_VIDEO) +#define CONFIG_BIOSEMU +#define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_SW_CURSOR +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_ATI_RADEON_FB +#define CONFIG_VIDEO_LOGO +/*#define CONFIG_CONSOLE_CURSOR*/ +#define CFG_ISA_IO_BASE_ADDRESS CFG_PCI2_IO_PHYS +#endif + #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #define CONFIG_DOS_PARTITION @@ -357,6 +377,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CFG_SCSI_MAXDEVICE CFG_SCSI_MAX_DEVICE #endif +#define CONFIG_MPC86XX_PCI2 + #endif /* CONFIG_PCI */ #if defined(CONFIG_TSEC_ENET) @@ -471,8 +493,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); */ #ifndef CFG_RAMBOOT #define CFG_ENV_IS_IN_FLASH 1 - #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) - #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ + #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x60000) + #define CFG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */ #define CFG_ENV_SIZE 0x2000 #else #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ -- cgit v1.3.1 From a22806469a8f2b69c829f4fd5361fdebd0cb01b4 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 8 Aug 2007 04:14:28 -0500 Subject: Treat ppc64 host as ppc Signed-off-by: Kumar Gala --- Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'Makefile') diff --git a/Makefile b/Makefile index 988dba8b3a1..2ff3e06a934 100644 --- a/Makefile +++ b/Makefile @@ -34,6 +34,7 @@ HOSTARCH := $(shell uname -m | \ -e s/arm.*/arm/ \ -e s/sa110/arm/ \ -e s/powerpc/ppc/ \ + -e s/ppc64/ppc/ \ -e s/macppc/ppc/) HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \ -- cgit v1.3.1 From 5d497e6bf0f5bf63729b4a47b3fd786d3c77a1bc Mon Sep 17 00:00:00 2001 From: "david.saada" Date: Mon, 18 Jun 2007 09:09:53 -0700 Subject: MPC83xx: Fix makefile to generate config.h file in the build directory MPC83xx: Fix the Makefile config sections to generate the include/config.h file in the build directory instead of the source directory. Signed-off-by: David Saada Signed-off-by: Kim Phillips --- Makefile | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'Makefile') diff --git a/Makefile b/Makefile index 0e6d3992dbe..704e480e3cc 100644 --- a/Makefile +++ b/Makefile @@ -1666,11 +1666,11 @@ MPC8313ERDB_66_config: unconfig @mkdir -p $(obj)include @echo "" >$(obj)include/config.h ; \ if [ "$(findstring _33_,$@)" ] ; then \ - echo "...33M ..." ; \ + echo -n "...33M ..." ; \ echo "#define CFG_33MHZ" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _66_,$@)" ] ; then \ - echo "...66M..." ; \ + echo -n "...66M..." ; \ echo "#define CFG_66MHZ" >>$(obj)include/config.h ; \ fi ; @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb @@ -1682,7 +1682,7 @@ MPC832XEMDS_SLAVE_config: unconfig @mkdir -p $(obj)include @echo "" >$(obj)include/config.h ; \ if [ "$(findstring _HOST_,$@)" ] ; then \ - echo "... PCI HOST " ; \ + echo -n "... PCI HOST " ; \ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _SLAVE_,$@)" ] ; then \ @@ -1691,11 +1691,11 @@ MPC832XEMDS_SLAVE_config: unconfig echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _33_,$@)" ] ; then \ - echo "...33M ..." ; \ + echo -n "...33M ..." ; \ echo "#define PCI_33M" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _66_,$@)" ] ; then \ - echo "...66M..." ; \ + echo -n "...66M..." ; \ echo "#define PCI_66M" >>$(obj)include/config.h ; \ fi ; @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds @@ -1724,7 +1724,7 @@ MPC8360EMDS_SLAVE_config: unconfig @mkdir -p $(obj)include @echo "" >$(obj)include/config.h ; \ if [ "$(findstring _HOST_,$@)" ] ; then \ - echo "... PCI HOST " ; \ + echo -n "... PCI HOST " ; \ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _SLAVE_,$@)" ] ; then \ @@ -1733,11 +1733,11 @@ MPC8360EMDS_SLAVE_config: unconfig echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _33_,$@)" ] ; then \ - echo "...33M ..." ; \ + echo -n "...33M ..." ; \ echo "#define PCI_33M" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _66_,$@)" ] ; then \ - echo "...66M..." ; \ + echo -n "...66M..." ; \ echo "#define PCI_66M" >>$(obj)include/config.h ; \ fi ; @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds -- cgit v1.3.1 From 1c274c4e05b6dc9b24edc8aa618b02f607ee6eed Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Wed, 25 Jul 2007 19:25:33 -0500 Subject: mpc83xx: add support for the MPC8323E RDB MPC8323E based board with 64MB fixed SDRAM, 16MB flash, five 10/100 ethernet ports connected via an ICPlus IP175C switch, one PCI slot, and serial. Features not supported in this patch are SD card interface, 2 USB ports, and the two phone ports. Signed-off-by: Michael Barkowski Signed-off-by: Kim Phillips --- Makefile | 3 + board/freescale/mpc8323erdb/Makefile | 50 +++ board/freescale/mpc8323erdb/config.mk | 28 ++ board/freescale/mpc8323erdb/mpc8323erdb.c | 217 +++++++++++ doc/README.mpc8323erdb | 71 ++++ include/configs/MPC8323ERDB.h | 583 ++++++++++++++++++++++++++++++ 6 files changed, 952 insertions(+) create mode 100644 board/freescale/mpc8323erdb/Makefile create mode 100644 board/freescale/mpc8323erdb/config.mk create mode 100644 board/freescale/mpc8323erdb/mpc8323erdb.c create mode 100644 doc/README.mpc8323erdb create mode 100644 include/configs/MPC8323ERDB.h (limited to 'Makefile') diff --git a/Makefile b/Makefile index 704e480e3cc..2a18a4d6aba 100644 --- a/Makefile +++ b/Makefile @@ -1675,6 +1675,9 @@ MPC8313ERDB_66_config: unconfig fi ; @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb +MPC8323ERDB_config: unconfig + @$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale + MPC832XEMDS_config \ MPC832XEMDS_HOST_33_config \ MPC832XEMDS_HOST_66_config \ diff --git a/board/freescale/mpc8323erdb/Makefile b/board/freescale/mpc8323erdb/Makefile new file mode 100644 index 00000000000..acc954488f5 --- /dev/null +++ b/board/freescale/mpc8323erdb/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/mpc8323erdb/config.mk b/board/freescale/mpc8323erdb/config.mk new file mode 100644 index 00000000000..fe0d37d424e --- /dev/null +++ b/board/freescale/mpc8323erdb/config.mk @@ -0,0 +1,28 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# MPC8323ERDB +# + +TEXT_BASE = 0xFE000000 diff --git a/board/freescale/mpc8323erdb/mpc8323erdb.c b/board/freescale/mpc8323erdb/mpc8323erdb.c new file mode 100644 index 00000000000..1886f196b27 --- /dev/null +++ b/board/freescale/mpc8323erdb/mpc8323erdb.c @@ -0,0 +1,217 @@ +/* + * Copyright (C) 2007 Freescale Semiconductor, Inc. + * + * Michael Barkowski + * Based on mpc832xmds file by Dave Liu + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#if defined(CONFIG_PCI) +#include +#endif +#if defined(CONFIG_SPD_EEPROM) +#include +#else +#include +#endif + +const qe_iop_conf_t qe_iop_conf_tab[] = { + /* UCC3 */ + {1, 0, 1, 0, 1}, /* TxD0 */ + {1, 1, 1, 0, 1}, /* TxD1 */ + {1, 2, 1, 0, 1}, /* TxD2 */ + {1, 3, 1, 0, 1}, /* TxD3 */ + {1, 9, 1, 0, 1}, /* TxER */ + {1, 12, 1, 0, 1}, /* TxEN */ + {3, 24, 2, 0, 1}, /* TxCLK->CLK10 */ + + {1, 4, 2, 0, 1}, /* RxD0 */ + {1, 5, 2, 0, 1}, /* RxD1 */ + {1, 6, 2, 0, 1}, /* RxD2 */ + {1, 7, 2, 0, 1}, /* RxD3 */ + {1, 8, 2, 0, 1}, /* RxER */ + {1, 10, 2, 0, 1}, /* RxDV */ + {0, 13, 2, 0, 1}, /* RxCLK->CLK9 */ + {1, 11, 2, 0, 1}, /* COL */ + {1, 13, 2, 0, 1}, /* CRS */ + + /* UCC2 */ + {0, 18, 1, 0, 1}, /* TxD0 */ + {0, 19, 1, 0, 1}, /* TxD1 */ + {0, 20, 1, 0, 1}, /* TxD2 */ + {0, 21, 1, 0, 1}, /* TxD3 */ + {0, 27, 1, 0, 1}, /* TxER */ + {0, 30, 1, 0, 1}, /* TxEN */ + {3, 23, 2, 0, 1}, /* TxCLK->CLK3 */ + + {0, 22, 2, 0, 1}, /* RxD0 */ + {0, 23, 2, 0, 1}, /* RxD1 */ + {0, 24, 2, 0, 1}, /* RxD2 */ + {0, 25, 2, 0, 1}, /* RxD3 */ + {0, 26, 1, 0, 1}, /* RxER */ + {0, 28, 2, 0, 1}, /* Rx_DV */ + {3, 21, 2, 0, 1}, /* RxCLK->CLK16 */ + {0, 29, 2, 0, 1}, /* COL */ + {0, 31, 2, 0, 1}, /* CRS */ + + {3, 4, 3, 0, 2}, /* MDIO */ + {3, 5, 1, 0, 2}, /* MDC */ + + {0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */ +}; + +int board_early_init_f(void) +{ + return 0; +} + +int fixed_sdram(void); + +long int initdram(int board_type) +{ + volatile immap_t *im = (immap_t *) CFG_IMMR; + u32 msize = 0; + + if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) + return -1; + + /* DDR SDRAM - Main SODIMM */ + im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; + + msize = fixed_sdram(); + + puts("\n DDR RAM: "); + + /* return total bus SDRAM size(bytes) -- DDR */ + return (msize * 1024 * 1024); +} + +/************************************************************************* + * fixed sdram init -- doesn't use serial presence detect. + ************************************************************************/ +int fixed_sdram(void) +{ + volatile immap_t *im = (immap_t *) CFG_IMMR; + u32 msize = 0; + u32 ddr_size; + u32 ddr_size_log2; + + msize = CFG_DDR_SIZE; + for (ddr_size = msize << 20, ddr_size_log2 = 0; + (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) { + if (ddr_size & 1) { + return -1; + } + } + im->sysconf.ddrlaw[0].ar = + LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); + im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL; + im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS; + im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG; + im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; + im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; + im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; + im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG; + im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2; + im->ddr.sdram_mode = CFG_DDR_MODE; + im->ddr.sdram_mode2 = CFG_DDR_MODE2; + im->ddr.sdram_interval = CFG_DDR_INTERVAL; + __asm__ __volatile__ ("sync"); + udelay(200); + + im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; + __asm__ __volatile__ ("sync"); + return msize; +} + +int checkboard(void) +{ + puts("Board: Freescale MPC8323ERDB\n"); + return 0; +} + +static struct pci_region pci_regions[] = { + { + bus_start: CFG_PCI1_MEM_BASE, + phys_start: CFG_PCI1_MEM_PHYS, + size: CFG_PCI1_MEM_SIZE, + flags: PCI_REGION_MEM | PCI_REGION_PREFETCH + }, + { + bus_start: CFG_PCI1_MMIO_BASE, + phys_start: CFG_PCI1_MMIO_PHYS, + size: CFG_PCI1_MMIO_SIZE, + flags: PCI_REGION_MEM + }, + { + bus_start: CFG_PCI1_IO_BASE, + phys_start: CFG_PCI1_IO_PHYS, + size: CFG_PCI1_IO_SIZE, + flags: PCI_REGION_IO + } +}; + +void pci_init_board(void) +{ + volatile immap_t *immr = (volatile immap_t *)CFG_IMMR; + volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk; + volatile law83xx_t *pci_law = immr->sysconf.pcilaw; + struct pci_region *reg[] = { pci_regions }; + + /* Enable all 3 PCI_CLK_OUTPUTs. */ + clk->occr |= 0xe0000000; + + /* Configure PCI Local Access Windows */ + pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR; + pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB; + + pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR; + pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB; + + mpc83xx_pci_init(1, reg, 0); +} + +#if defined(CONFIG_OF_BOARD_SETUP) + +/* + * Prototypes of functions that we use. + */ +void ft_cpu_setup(void *blob, bd_t *bd); + +#ifdef CONFIG_PCI +void ft_pci_setup(void *blob, bd_t *bd); +#endif + +void +ft_board_setup(void *blob, bd_t *bd) +{ + int nodeoffset; + int tmp[2]; + + nodeoffset = fdt_find_node_by_path(blob, "/memory"); + if (nodeoffset >= 0) { + tmp[0] = cpu_to_be32(bd->bi_memstart); + tmp[1] = cpu_to_be32(bd->bi_memsize); + fdt_setprop(blob, nodeoffset, "reg", tmp, sizeof(tmp)); + } + + ft_cpu_setup(blob, bd); + +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif +} +#endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/doc/README.mpc8323erdb b/doc/README.mpc8323erdb new file mode 100644 index 00000000000..6f898293735 --- /dev/null +++ b/doc/README.mpc8323erdb @@ -0,0 +1,71 @@ +Freescale MPC8323ERDB Board +----------------------------------------- + +1. Memory Map + The memory map looks like this: + + 0x0000_0000 0x03ff_ffff DDR 64M + 0x8000_0000 0x8fff_ffff PCI MEM 256M + 0x9000_0000 0x9fff_ffff PCI_MMIO 256M + 0xe000_0000 0xe00f_ffff IMMR 1M + 0xd000_0000 0xd3ff_ffff PCI IO 64M + 0xfe00_0000 0xfeff_ffff NOR FLASH (CS0) 16M + +2. Compilation + + Assuming you're using BASH (or similar) as your shell: + + export CROSS_COMPILE=your-cross-compiler-prefix- + make distclean + make MPC8323ERDB_config + make + +3. Downloading and Flashing Images + +3.1 Reflash U-boot Image using U-boot + + N.b, have an alternate means of programming + the flash available if the new u-boot doesn't boot. + + First try a: + + tftpboot $loadaddr $uboot + + to make sure that the TFTP load will succeed before + an erase goes ahead and wipes out your current firmware. + Then do a: + + run tftpflash + + which is a shorter version of the manual sequence: + + tftp $loadaddr u-boot.bin + protect off fe000000 +$filesize + erase fe000000 +$filesize + cp.b $loadaddr fe000000 $filesize + + To keep your old u-boot's environment variables, do a: + + saveenv + + prior to resetting the board. + +3.2 Downloading and Booting Linux Kernel + + Ensure that all networking-related environment variables are set + properly (including ipaddr, serverip, gatewayip (if needed), + netmask, ethaddr, eth1addr, rootpath (if using NFS root), + fdtfile, and bootfile). + + Then, do one of the following, depending on whether you + want an NFS root or a ramdisk root: + + run nfsboot + + or + + run ramboot + +4 Notes + + The console baudrate for MPC8323ERDB is 115200bps. diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h new file mode 100644 index 00000000000..376973b94da --- /dev/null +++ b/include/configs/MPC8323ERDB.h @@ -0,0 +1,583 @@ +/* + * Copyright (C) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#undef DEBUG + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 /* E300 family */ +#define CONFIG_QE 1 /* Has QE */ +#define CONFIG_MPC83XX 1 /* MPC83xx family */ +#define CONFIG_MPC832X 1 /* MPC832x CPU specific */ + +#define CONFIG_PCI 1 +#define CONFIG_83XX_GENERIC_PCI 1 + +/* + * System Clock Setup + */ +#define CONFIG_83XX_CLKIN 66666667 /* in Hz */ + +#ifndef CONFIG_SYS_CLK_FREQ +#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN +#endif + +/* + * Hardware Reset Configuration Word + */ +#define CFG_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_2X1 |\ + HRCWL_VCO_1X2 |\ + HRCWL_CSB_TO_CLKIN_2X1 |\ + HRCWL_CORE_TO_CSB_2_5X1 |\ + HRCWL_CE_PLL_VCO_DIV_2 |\ + HRCWL_CE_PLL_DIV_1X1 |\ + HRCWL_CE_TO_PLL_1X3) + +#define CFG_HRCW_HIGH (\ + HRCWH_PCI_HOST |\ + HRCWH_PCI1_ARBITER_ENABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0X00000100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT |\ + HRCWH_BIG_ENDIAN |\ + HRCWH_LALE_NORMAL) + +/* + * System IO Config + */ +#define CFG_SICRL 0x00000000 + +#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ + +/* + * IMMR new address + */ +#define CFG_IMMR 0xE0000000 + +/* + * DDR Setup + */ +#define CFG_DDR_BASE 0x00000000 /* DDR is system memory */ +#define CFG_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDRCDR 0x73000002 /* DDR II voltage is 1.8V */ + +#undef CONFIG_SPD_EEPROM +#if defined(CONFIG_SPD_EEPROM) +/* Determine DDR configuration from I2C interface + */ +#define SPD_EEPROM_ADDRESS 0x51 /* DDR SODIMM */ +#else +/* Manually set up DDR parameters + */ +#define CFG_DDR_SIZE 64 /* MB */ +#define CFG_DDR_CS0_CONFIG 0x80840101 +#define CFG_DDR_TIMING_0 0x00220802 +#define CFG_DDR_TIMING_1 0x3935d322 +#define CFG_DDR_TIMING_2 0x0f9048ca +#define CFG_DDR_TIMING_3 0x00000000 +#define CFG_DDR_CLK_CNTL 0x02000000 +#define CFG_DDR_MODE 0x44400232 +#define CFG_DDR_MODE2 0x8000c000 +#define CFG_DDR_INTERVAL 0x03200064 +#define CFG_DDR_CS0_BNDS 0x00000003 +#define CFG_DDR_SDRAM_CFG 0x43080000 +#define CFG_DDR_SDRAM_CFG2 0x00401000 +#endif + +/* + * Memory test + */ +#undef CFG_DRAM_TEST /* memory test, takes time */ +#define CFG_MEMTEST_START 0x00030000 /* memtest region */ +#define CFG_MEMTEST_END 0x03f00000 + +/* + * The reserved memory + */ +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ + +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT +#else +#undef CFG_RAMBOOT +#endif + +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ + +/* + * Initial RAM Base Address Setup + */ +#define CFG_INIT_RAM_LOCK 1 +#define CFG_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM */ +#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) + +/* + * Local Bus Configuration & Clock Setup + */ +#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_2) +#define CFG_LBC_LBCR 0x00000000 + +/* + * FLASH on the Local Bus + */ +#define CFG_FLASH_CFI /* use the Common Flash Interface */ +#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ +#define CFG_FLASH_BASE 0xFE000000 /* FLASH base address */ +#define CFG_FLASH_SIZE 16 /* FLASH size is 16M */ + +#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */ +#define CFG_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */ + +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* Flash Base address */ \ + (2 << BR_PS_SHIFT) | /* 16 bit port size */ \ + BR_V) /* valid */ +#define CFG_OR0_PRELIM 0xfe006ff7 /* 16MB Flash size */ + +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ +#define CFG_MAX_FLASH_SECT 128 /* sectors per device */ + +#undef CFG_FLASH_CHECKSUM + +/* + * SDRAM on the Local Bus + */ +#undef CFG_LB_SDRAM /* The board has not SRDAM on local bus */ + +#ifdef CFG_LB_SDRAM +#define CFG_LBC_SDRAM_BASE 0xF0000000 /* SDRAM base address */ +#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ + +#define CFG_LBLAWBAR2_PRELIM CFG_LBC_SDRAM_BASE +#define CFG_LBLAWAR2_PRELIM 0x80000019 /* 64MB */ + +/*local bus BR2, OR2 definition for SDRAM if soldered on the EPB board */ +/* + * Base Register 2 and Option Register 2 configure SDRAM. + * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000. + * + * For BR2, need: + * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 + * port size = 32-bits = BR2[19:20] = 11 + * no parity checking = BR2[21:22] = 00 + * SDRAM for MSEL = BR2[24:26] = 011 + * Valid = BR[31] = 1 + * + * 0 4 8 12 16 20 24 28 + * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861 + * + * CFG_LBC_SDRAM_BASE should be masked and OR'ed into + * the top 17 bits of BR2. + */ + +#define CFG_BR2_PRELIM 0xf0001861 /*Port size=32bit, MSEL=SDRAM */ + +/* + * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64. + * + * For OR2, need: + * 64MB mask for AM, OR2[0:7] = 1111 1100 + * XAM, OR2[17:18] = 11 + * 9 columns OR2[19-21] = 010 + * 13 rows OR2[23-25] = 100 + * EAD set for extra time OR[31] = 1 + * + * 0 4 8 12 16 20 24 28 + * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901 + */ + +#define CFG_OR2_PRELIM 0xfc006901 + +#define CFG_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */ +#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32 */ + +/* + * LSDMR masks + */ +#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4)) + +#define CFG_LBC_LSDMR_COMMON 0x0063b723 + +/* + * SDRAM Controller configuration sequence. + */ +#define CFG_LBC_LSDMR_1 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_PCHALL) +#define CFG_LBC_LSDMR_2 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_ARFRSH) +#define CFG_LBC_LSDMR_3 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_ARFRSH) +#define CFG_LBC_LSDMR_4 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_MRW) +#define CFG_LBC_LSDMR_5 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_NORMAL) + +#endif + +/* + * Windows to access PIB via local bus + */ +#define CFG_LBLAWBAR3_PRELIM 0xf8008000 /* windows base 0xf8008000 */ +#define CFG_LBLAWAR3_PRELIM 0x8000000f /* windows size 64KB */ + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_CLK get_bus_freq(0) + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} + +#define CFG_NS16550_COM1 (CFG_IMMR+0x4500) +#define CFG_NS16550_COM2 (CFG_IMMR+0x4600) + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +/* Use the HUSH parser */ +#define CFG_HUSH_PARSER +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + +#define OF_CPU "PowerPC,8323@0" +#define OF_SOC "soc8323@e0000000" +#define OF_QE "qe@e0100000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc8323@e0000000/serial@4500" + +/* I2C */ +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_FSL_I2C +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_NOPROBES {0x51} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 + +/* + * Config on-board RTC + */ +#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */ +#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */ + +/* + * General PCI + * Addresses are mapped 1-1. + */ +#define CFG_PCI1_MEM_BASE 0x80000000 +#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE +#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_MMIO_BASE 0x90000000 +#define CFG_PCI1_MMIO_PHYS CFG_PCI1_MMIO_BASE +#define CFG_PCI1_MMIO_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_IO_BASE 0xd0000000 +#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE +#define CFG_PCI1_IO_SIZE 0x04000000 /* 64M */ + +#ifdef CONFIG_PCI + +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + +#undef CONFIG_EEPRO100 +#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CFG_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ + +#endif /* CONFIG_PCI */ + + +#ifndef CONFIG_NET_MULTI +#define CONFIG_NET_MULTI 1 +#endif + +/* + * QE UEC ethernet configuration + */ +#define CONFIG_UEC_ETH +#define CONFIG_ETHPRIME "Freescale GETH" + +#define CONFIG_UEC_ETH1 /* ETH3 */ + +#ifdef CONFIG_UEC_ETH1 +#define CFG_UEC1_UCC_NUM 2 /* UCC3 */ +#define CFG_UEC1_RX_CLK QE_CLK9 +#define CFG_UEC1_TX_CLK QE_CLK10 +#define CFG_UEC1_ETH_TYPE FAST_ETH +#define CFG_UEC1_PHY_ADDR 4 +#define CFG_UEC1_INTERFACE_MODE ENET_100_MII +#endif + +#define CONFIG_UEC_ETH2 /* ETH4 */ + +#ifdef CONFIG_UEC_ETH2 +#define CFG_UEC2_UCC_NUM 1 /* UCC2 */ +#define CFG_UEC2_RX_CLK QE_CLK16 +#define CFG_UEC2_TX_CLK QE_CLK3 +#define CFG_UEC2_ETH_TYPE FAST_ETH +#define CFG_UEC2_PHY_ADDR 0 +#define CFG_UEC2_INTERFACE_MODE ENET_100_MII +#endif + +/* + * Environment + */ +#ifndef CFG_RAMBOOT + #define CFG_ENV_IS_IN_FLASH 1 + #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) + #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ + #define CFG_ENV_SIZE 0x2000 +#else + #define CFG_NO_FLASH 1 /* Flash is not usable now */ + #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ + #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) + #define CFG_ENV_SIZE 0x2000 +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C +#define CONFIG_CMD_ASKENV + +#if defined(CONFIG_PCI) + #define CONFIG_CMD_PCI +#endif +#if defined(CFG_RAMBOOT) + #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_LOADS +#endif + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LOAD_ADDR 0x2000000 /* default load address */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#if (CONFIG_CMD_KGDB) + #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else + #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* + * Core HID Setup + */ +#define CFG_HID0_INIT 0x000000000 +#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK +#define CFG_HID2 HID2_HBE + +/* + * Cache Config + */ +#define CFG_DCACHE_SIZE 16384 +#define CFG_CACHELINE_SIZE 32 +#if defined(CONFIG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value */ +#endif + +/* + * MMU Setup + */ + +/* DDR: cache cacheable */ +#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT0L CFG_IBAT0L +#define CFG_DBAT0U CFG_IBAT0U + +/* IMMRBAR & PCI IO: cache-inhibit and guarded */ +#define CFG_IBAT1L (CFG_IMMR | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT1U (CFG_IMMR | BATU_BL_4M | BATU_VS | BATU_VP) +#define CFG_DBAT1L CFG_IBAT1L +#define CFG_DBAT1U CFG_IBAT1U + +/* FLASH: icache cacheable, but dcache-inhibit and guarded */ +#define CFG_IBAT2L (CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT2U (CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP) +#define CFG_DBAT2L (CFG_FLASH_BASE | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT2U CFG_IBAT2U + +#define CFG_IBAT3L (0) +#define CFG_IBAT3U (0) +#define CFG_DBAT3L CFG_IBAT3L +#define CFG_DBAT3U CFG_IBAT3U + +/* Stack in dcache: cacheable, no memory coherence */ +#define CFG_IBAT4L (CFG_INIT_RAM_ADDR | BATL_PP_10) +#define CFG_IBAT4U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) +#define CFG_DBAT4L CFG_IBAT4L +#define CFG_DBAT4U CFG_IBAT4U + +#ifdef CONFIG_PCI +/* PCI MEM space: cacheable */ +#define CFG_IBAT5L (CFG_PCI1_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT5U (CFG_PCI1_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT5L CFG_IBAT5L +#define CFG_DBAT5U CFG_IBAT5U +/* PCI MMIO space: cache-inhibit and guarded */ +#define CFG_IBAT6L (CFG_PCI1_MMIO_PHYS | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT6U (CFG_PCI1_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +#else +#define CFG_IBAT5L (0) +#define CFG_IBAT5U (0) +#define CFG_IBAT6L (0) +#define CFG_IBAT6U (0) +#define CFG_DBAT5L CFG_IBAT5L +#define CFG_DBAT5U CFG_IBAT5U +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +#endif + +/* Nothing in BAT7 */ +#define CFG_IBAT7L (0) +#define CFG_IBAT7U (0) +#define CFG_DBAT7L CFG_IBAT7L +#define CFG_DBAT7U CFG_IBAT7U + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_ETHADDR 00:04:9f:ef:03:01 +#define CONFIG_HAS_ETH1 /* add support for "eth1addr" */ +#define CONFIG_ETH1ADDR 00:04:9f:ef:03:02 + +#define CONFIG_IPADDR 10.0.0.2 +#define CONFIG_SERVERIP 10.0.0.1 +#define CONFIG_GATEWAYIP 10.0.0.1 +#define CONFIG_NETMASK 255.0.0.0 +#define CONFIG_NETDEV eth1 + +#define CONFIG_HOSTNAME mpc8323erdb +#define CONFIG_ROOTPATH /nfsroot +#define CONFIG_RAMDISKFILE rootfs.ext2.gz.uboot +#define CONFIG_BOOTFILE uImage +#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ +#define CONFIG_FDTFILE mpc832x_rdb.dtb + +#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ +#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */ +#define CONFIG_BAUDRATE 115200 + +#define XMK_STR(x) #x +#define MK_STR(x) XMK_STR(x) + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=" MK_STR(CONFIG_NETDEV) "\0" \ + "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ + "tftpflash=tftp $loadaddr $uboot;" \ + "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ + "erase " MK_STR(TEXT_BASE) " +$filesize; " \ + "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ + "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ + "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ + "fdtaddr=400000\0" \ + "fdtfile=" MK_STR(CONFIG_FDTFILE) "\0" \ + "ramdiskaddr=1000000\0" \ + "ramdiskfile=" MK_STR(CONFIG_RAMDISKFILE) "\0" \ + "console=ttyS0\0" \ + "setbootargs=setenv bootargs " \ + "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \ + "setipargs=setenv bootargs nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "root=$rootdev rw console=$console,$baudrate $othbootargs\0" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv rootdev /dev/nfs;" \ + "run setbootargs;" \ + "run setipargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv rootdev /dev/ram;" \ + "run setbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#undef MK_STR +#undef XMK_STR + +#endif /* __CONFIG_H */ -- cgit v1.3.1 From ac982ea5a4f2f993efcf52dca122f5a59df047d8 Mon Sep 17 00:00:00 2001 From: Niklaus Giger Date: Fri, 27 Jul 2007 11:28:44 +0200 Subject: Add PPC4xx-HCU4 and HCU5 boards: make related Signed-off-by: Niklaus Giger --- Makefile | 6 ++ board/netstal/hcu4/Makefile | 49 ++++++++++++++ board/netstal/hcu4/config.mk | 29 +++++++++ board/netstal/hcu4/u-boot.lds | 140 ++++++++++++++++++++++++++++++++++++++++ board/netstal/hcu5/Makefile | 49 ++++++++++++++ board/netstal/hcu5/config.mk | 31 +++++++++ board/netstal/hcu5/u-boot.lds | 144 ++++++++++++++++++++++++++++++++++++++++++ 7 files changed, 448 insertions(+) create mode 100644 board/netstal/hcu4/Makefile create mode 100644 board/netstal/hcu4/config.mk create mode 100644 board/netstal/hcu4/u-boot.lds create mode 100644 board/netstal/hcu5/Makefile create mode 100644 board/netstal/hcu5/config.mk create mode 100644 board/netstal/hcu5/u-boot.lds (limited to 'Makefile') diff --git a/Makefile b/Makefile index 3af9962e678..04c2c02dc4b 100644 --- a/Makefile +++ b/Makefile @@ -1134,6 +1134,12 @@ EXBITGEN_config: unconfig G2000_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000 +hcu4_config: unconfig + @./mkconfig $(@:_config=) ppc ppc4xx hcu4 netstal + +hcu5_config: unconfig + @./mkconfig $(@:_config=) ppc ppc4xx hcu5 netstal + HH405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx hh405 esd diff --git a/board/netstal/hcu4/Makefile b/board/netstal/hcu4/Makefile new file mode 100644 index 00000000000..d9825a5f255 --- /dev/null +++ b/board/netstal/hcu4/Makefile @@ -0,0 +1,49 @@ +# +# (C) Copyright 2007 Netstal Maschinen AG +# Niklaus Giger (ng@netstal.com) +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +vpath flash.c ../common +COBJS = $(BOARD).o flash.o +SOBJS = + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/netstal/hcu4/config.mk b/board/netstal/hcu4/config.mk new file mode 100644 index 00000000000..f5a4ce474d1 --- /dev/null +++ b/board/netstal/hcu4/config.mk @@ -0,0 +1,29 @@ +# +# (C) Copyright 2005 Netstal Maschinen AG +# Niklaus Giger (ng@netstal.com) +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# Netstal Maschinen AG: HCU4 boards +# + +TEXT_BASE = 0xFFFa0000 + +ifeq ($(debug),1) +PLATFORM_CPPFLAGS += -DDEBUG -g +endif + diff --git a/board/netstal/hcu4/u-boot.lds b/board/netstal/hcu4/u-boot.lds new file mode 100644 index 00000000000..b6e28f839d3 --- /dev/null +++ b/board/netstal/hcu4/u-boot.lds @@ -0,0 +1,140 @@ +/* + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + .resetvec 0xFFFFFFFC : + { + *(.resetvec) + } = 0xffff + + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : { + /* The start.o file includes the initial jump vector that + must be located in the beginning. It is the basic run- + time function that calls all other functions. */ + cpu/ppc4xx/start.o (.text) + +/* . = env_offset;*/ +/* common/environment.o(.text)*/ + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/netstal/hcu5/Makefile b/board/netstal/hcu5/Makefile new file mode 100644 index 00000000000..eee310b1a14 --- /dev/null +++ b/board/netstal/hcu5/Makefile @@ -0,0 +1,49 @@ +# +# (C) Copyright 2007 Netstal Maschinen AG +# Niklaus Giger (ng@netstal.com) +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +vpath flash.c ../common +COBJS = $(BOARD).o sdram.o flash.o +SOBJS = init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/netstal/hcu5/config.mk b/board/netstal/hcu5/config.mk new file mode 100644 index 00000000000..58ec2af31e5 --- /dev/null +++ b/board/netstal/hcu5/config.mk @@ -0,0 +1,31 @@ +# +# (C) Copyright 2005 Netstal Maschinen AG +# Niklaus Giger (ng@netstal.com) +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# Netstal Maschinen AG: HCU5 boards +# + +TEXT_BASE = 0xFFFa0000 + +PLATFORM_CPPFLAGS += -DCONFIG_440=1 + +ifeq ($(debug),1) +PLATFORM_CPPFLAGS += -DDEBUG -g +endif + diff --git a/board/netstal/hcu5/u-boot.lds b/board/netstal/hcu5/u-boot.lds new file mode 100644 index 00000000000..6d255a94eaf --- /dev/null +++ b/board/netstal/hcu5/u-boot.lds @@ -0,0 +1,144 @@ +/* + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); + +SECTIONS +{ + .resetvec 0xFFFFFFFC : + { + *(.resetvec) + } = 0xffff + + .bootpg 0xFFFFF000 : + { + cpu/ppc4xx/start.o (.bootpg) + } = 0xffff + + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/ppc4xx/start.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + + ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified."); + + _end = . ; + PROVIDE (end = .); +} -- cgit v1.3.1 From 35d22f957a85a22bb3cd1ad084fa5404620d1c42 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Fri, 10 Aug 2007 10:42:25 +0200 Subject: Coding style cleanup Signed-off-by: Stefan Roese --- MAKEALL | 2 +- Makefile | 8 +- board/netstal/common/nm_bsp.c | 1 - board/netstal/hcu4/config.mk | 1 - board/netstal/hcu4/hcu4.c | 80 ++++++++++--------- board/netstal/hcu5/config.mk | 1 - board/netstal/hcu5/hcu5.c | 177 +++++++++++++++++++++--------------------- board/netstal/hcu5/init.S | 4 +- board/netstal/hcu5/sdram.c | 23 +++--- include/configs/hcu4.h | 4 +- include/configs/hcu5.h | 4 - 11 files changed, 153 insertions(+), 152 deletions(-) (limited to 'Makefile') diff --git a/MAKEALL b/MAKEALL index e7067972ce3..61a4d4570d2 100755 --- a/MAKEALL +++ b/MAKEALL @@ -91,7 +91,7 @@ LIST_4xx=" \ PPChameleonEVB sbc405 sc3 sequoia \ sequoia_nand taishan VOH405 VOM405 \ W7OLMC W7OLMG walnut WUH405 \ - XPEDITE1K yellowstone yosemite yucca \ + XPEDITE1K yellowstone yosemite yucca \ " ######################################################################### diff --git a/Makefile b/Makefile index 04c2c02dc4b..8282c71d154 100644 --- a/Makefile +++ b/Makefile @@ -1040,7 +1040,7 @@ ADCIOP_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd alpr_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx alpr prodrive + @$(MKCONFIG) $(@:_config=) ppc ppc4xx alpr prodrive AP1000_config:unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix @@ -1135,10 +1135,10 @@ G2000_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000 hcu4_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx hcu4 netstal + @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu4 netstal hcu5_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx hcu5 netstal + @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu5 netstal HH405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx hh405 esd @@ -1258,7 +1258,7 @@ rainier_nand_config: unconfig @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk sc3_config:unconfig - @./mkconfig $(@:_config=) ppc ppc4xx sc3 + @$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3 taishan_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc diff --git a/board/netstal/common/nm_bsp.c b/board/netstal/common/nm_bsp.c index ee1b684abd7..1e06780c0eb 100644 --- a/board/netstal/common/nm_bsp.c +++ b/board/netstal/common/nm_bsp.c @@ -39,4 +39,3 @@ U_BOOT_CMD( "Help for Netstal Maschinen BSP specific command.\n" ); #endif - diff --git a/board/netstal/hcu4/config.mk b/board/netstal/hcu4/config.mk index f5a4ce474d1..376609ab0d6 100644 --- a/board/netstal/hcu4/config.mk +++ b/board/netstal/hcu4/config.mk @@ -26,4 +26,3 @@ TEXT_BASE = 0xFFFa0000 ifeq ($(debug),1) PLATFORM_CPPFLAGS += -DDEBUG -g endif - diff --git a/board/netstal/hcu4/hcu4.c b/board/netstal/hcu4/hcu4.c index deb7d2da934..252aaa76b2a 100644 --- a/board/netstal/hcu4/hcu4.c +++ b/board/netstal/hcu4/hcu4.c @@ -27,10 +27,30 @@ DECLARE_GLOBAL_DATA_PTR; +#define HCU_MACH_VERSIONS_REGISTER (0x7C000000 + 0xF00000) + +#define mtsdram(reg, data) { mtdcr(memcfga,reg);mtdcr(memcfgd,data); } +#define mfsdram(value, reg) { mtdcr(memcfga,reg); value = mfdcr(memcfgd); } + +#define SDRAM_LEN 32*1024*1024 /* 32 MB -RAM */ + +#define DO_UGLY_SDRAM_WORKAROUND + +enum { + /* HW_GENERATION_HCU wird nicht mehr unterstuetzt */ + HW_GENERATION_HCU2 = 0x10, + HW_GENERATION_HCU3 = 0x10, + HW_GENERATION_HCU4 = 0x20, + HW_GENERATION_MCU = 0x08, + HW_GENERATION_MCU20 = 0x0a, + HW_GENERATION_MCU25 = 0x09, +}; + void sysLedSet(u32 value); -long int spd_sdram(int(read_spd)(uint addr)) +long int spd_sdram(int(read_spd)(uint addr)); + #ifdef CONFIG_SPD_EEPROM - #define DEBUG +#define DEBUG #endif #if defined(DEBUG) @@ -86,26 +106,15 @@ int board_pre_init (void) { return board_early_init_f (); } - #endif -enum { - /* HW_GENERATION_HCU wird nicht mehr unterstuetzt */ - HW_GENERATION_HCU2 = 0x10, - HW_GENERATION_HCU3 = 0x10, - HW_GENERATION_HCU4 = 0x20, - HW_GENERATION_MCU = 0x08, - HW_GENERATION_MCU20 = 0x0a, - HW_GENERATION_MCU25 = 0x09, -}; - int checkboard (void) { -#define HCU_MACH_VERSIONS_REGISTER ( 0x7C000000 + 0xF00000 ) - unsigned j; - uint16_t *boardVersReg = (uint16_t *) HCU_MACH_VERSIONS_REGISTER; - uint16_t generation = *boardVersReg & 0xf0; - uint16_t index = *boardVersReg & 0x0f; + unsigned int j; + u16 *boardVersReg = (u16 *) HCU_MACH_VERSIONS_REGISTER; + u16 generation = *boardVersReg & 0xf0; + u16 index = *boardVersReg & 0x0f; + /* Force /RTS to active. The board it not wired quite correctly to use cts/rtc flow control, so just force the /RST active and forget about it. */ @@ -117,24 +126,26 @@ int checkboard (void) printf ("HCU4: index %d\n\n", index); /* GPIO here noch nicht richtig initialisert !!! */ sysLedSet(0); - for (j=0; j < 7;j++) { + for (j = 0; j < 7; j++) { sysLedSet(1 << j); - udelay(50*1000); + udelay(50 * 1000); } + return 0; } u32 sysLedGet(void) { - return( ~( (*(u32 *)GPIO0_OR)) >> 23) & 0xff; + return (~((*(u32 *)GPIO0_OR)) >> 23) & 0xff; } void sysLedSet(u32 value /* value to place in LEDs */) { u32 tmp = ~value; u32 *ledReg; - tmp = (tmp << 23) | 0x7FFFFF; - ledReg = (u32 *)GPIO0_OR; + + tmp = (tmp << 23) | 0x7FFFFF; + ledReg = (u32 *)GPIO0_OR; *ledReg = tmp; } @@ -147,13 +158,11 @@ void sdram_init(void) return; } -#define mtsdram(reg, data) { mtdcr(memcfga,reg);mtdcr(memcfgd,data); } -#define mfsdram(value, reg) { mtdcr(memcfga,reg); value = mfdcr(memcfgd); } - #if defined(DEBUG) void show_sdram_registers(void) { u32 value; + printf ("SDRAM Controller Registers --\n"); mfsdram(value, mem_mcopt1); printf (" SDRAM0_CFG : 0x%08x\n", value); @@ -170,8 +179,6 @@ void show_sdram_registers(void) } #endif -#define SDRAM_LEN 32*1024*1024 /* 32 MB -RAM */ - /* * this is even after checkboard. It returns the size of the SDRAM * that we have installed. This function is called by board_init_f @@ -244,9 +251,10 @@ long int fixed_hcu4_sdram (int board_type) static u32 getSerialNr(void) { u32 *serial = (u32 *)CFG_FLASH_BASE; - if (*serial == 0xffffffff) { + + if (*serial == 0xffffffff) return get_ticks(); - } + return *serial; } @@ -260,12 +268,14 @@ int misc_init_r(void) char *s = getenv("ethaddr"); char *e; int i; - u32 serial = getSerialNr(); + u32 serial = getSerialNr(); + for (i = 0; i < 6; ++i) { gd->bd->bi_enetaddr[i] = s ? simple_strtoul (s, &e, 16) : 0; if (s) s = (*e) ? e + 1 : e; } + if (gd->bd->bi_enetaddr[3] == 0 && gd->bd->bi_enetaddr[4] == 0 && gd->bd->bi_enetaddr[5] == 0) { @@ -288,13 +298,14 @@ int misc_init_r(void) return 0; } -#define DO_UGLY_SDRAM_WORKAROUND #ifdef DO_UGLY_SDRAM_WORKAROUND - #include "i2c.h" +#include "i2c.h" + void set_spd_default_value(unsigned int spd_addr,uchar def_val) { uchar value; int res = i2c_read(SPD_EEPROM_ADDRESS, spd_addr, 1, &value, 1) ; + if (res == 0 && value == 0xff) { res = i2c_write(SPD_EEPROM_ADDRESS, spd_addr, 1, &def_val, 1) ; @@ -387,7 +398,6 @@ long int initdram(int board_type) bcu4_testdram(dram_size); printf("%s %d MB of SDRAM\n", __FUNCTION__, dram_size/(1024*1024)); #endif + return dram_size; } - - diff --git a/board/netstal/hcu5/config.mk b/board/netstal/hcu5/config.mk index 58ec2af31e5..cfd574412c1 100644 --- a/board/netstal/hcu5/config.mk +++ b/board/netstal/hcu5/config.mk @@ -28,4 +28,3 @@ PLATFORM_CPPFLAGS += -DCONFIG_440=1 ifeq ($(debug),1) PLATFORM_CPPFLAGS += -DDEBUG -g endif - diff --git a/board/netstal/hcu5/hcu5.c b/board/netstal/hcu5/hcu5.c index 59107b920a3..23df0814ff5 100644 --- a/board/netstal/hcu5/hcu5.c +++ b/board/netstal/hcu5/hcu5.c @@ -29,12 +29,34 @@ void sysLedSet(u32 value); extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; -#define mtcpr0(reg, data) do { mtdcr(CPR0_CFGADDR,reg); \ - mtdcr(CPR0_CFGDATA,data); } while (0) -#define mfcpr0(reg, data) do { mtdcr(CPR0_CFGADDR,reg); \ - data = mfdcr(CPR0_CFGDATA); } while (0) +#undef BOOTSTRAP_OPTION_A_ACTIVE + +#define SDR0_CP440 0x0180 + +#define SYSTEM_RESET 0x30000000 +#define CHIP_RESET 0x20000000 + +#define SDR0_ECID0 0x0080 +#define SDR0_ECID1 0x0081 +#define SDR0_ECID2 0x0082 +#define SDR0_ECID3 0x0083 + +#define SYS_IO_ADDRESS 0xcce00000 + +#define DEFAULT_ETH_ADDR "ethaddr" +/* ethaddr for first or etha1ddr for second ethernet */ + +enum { + /* HW_GENERATION_HCU1 is no longer supported */ + HW_GENERATION_HCU2 = 0x10, + HW_GENERATION_HCU3 = 0x10, + HW_GENERATION_HCU4 = 0x20, + HW_GENERATION_HCU5 = 0x30, + HW_GENERATION_MCU = 0x08, + HW_GENERATION_MCU20 = 0x0a, + HW_GENERATION_MCU25 = 0x09, +}; -#define SDR0_CP440 0x0180 /* * This function is run very early, out of flash, and before devices are @@ -50,7 +72,6 @@ int board_early_init_f(void) { u32 reg; -#undef BOOTSTRAP_OPTION_A_ACTIVE #ifdef BOOTSTRAP_OPTION_A_ACTIVE /* Booting with Bootstrap Option A * First boot, with CPR0_ICFG_RLI_MASK == 0 @@ -64,27 +85,26 @@ int board_early_init_f(void) u32 cpr0icfg; u32 dbcr; - mfcpr0(CPR0_ICFG, cpr0icfg); - if ( ! (cpr0icfg & CPR0_ICFG_RLI_MASK ) ) { - mtcpr0(CPR0_MALD, 0x02000000); - mtcpr0(CPR0_OPBD, 0x02000000); - mtcpr0(CPR0_PERD, 0x05000000); /* 1:5 */ - mtcpr0(CPR0_PLLC, 0x40000238); - mtcpr0(CPR0_PLLD, 0x01010414); - mtcpr0(CPR0_PRIMAD, 0x01000000); - mtcpr0(CPR0_PRIMBD, 0x01000000); - mtcpr0(CPR0_SPCID, 0x03000000); - mtsdr(SDR0_PFC0, 0x00003E00); /* [CTE] = 0 */ - mtsdr(SDR0_CP440, 0x0EAAEA02); /* [Nto1] = 1*/ - mtcpr0(CPR0_ICFG, cpr0icfg | CPR0_ICFG_RLI_MASK); + + mfcpr(CPR0_ICFG, cpr0icfg); + if (!(cpr0icfg & CPR0_ICFG_RLI_MASK)) { + mtcpr(CPR0_MALD, 0x02000000); + mtcpr(CPR0_OPBD, 0x02000000); + mtcpr(CPR0_PERD, 0x05000000); /* 1:5 */ + mtcpr(CPR0_PLLC, 0x40000238); + mtcpr(CPR0_PLLD, 0x01010414); + mtcpr(CPR0_PRIMAD, 0x01000000); + mtcpr(CPR0_PRIMBD, 0x01000000); + mtcpr(CPR0_SPCID, 0x03000000); + mtsdr(SDR0_PFC0, 0x00003E00); /* [CTE] = 0 */ + mtsdr(SDR0_CP440, 0x0EAAEA02); /* [Nto1] = 1*/ + mtcpr(CPR0_ICFG, cpr0icfg | CPR0_ICFG_RLI_MASK); /* * Initiate system reset in debug control register DBCR */ dbcr = mfspr(dbcr0); - #define SYSTEM_RESET 0x30000000 - #define CHIP_RESET 0x20000000 - mtspr(dbcr0, dbcr | CHIP_RESET ); + mtspr(dbcr0, dbcr | CHIP_RESET); } mtsdr(SDR0_CP440, 0x0EAAEA02); /* [Nto1] = 1*/ #endif @@ -162,60 +182,42 @@ int board_early_init_f(void) return 0; } -#ifdef CONFIG_BOARD_PRE_INIT -int board_pre_init (void) +int board_pre_init(void) { - return board_early_init_f (); + return board_early_init_f(); } -#endif - -enum { - /* HW_GENERATION_HCU1 is no longer supported */ - HW_GENERATION_HCU2 = 0x10, - HW_GENERATION_HCU3 = 0x10, - HW_GENERATION_HCU4 = 0x20, - HW_GENERATION_HCU5 = 0x30, - HW_GENERATION_MCU = 0x08, - HW_GENERATION_MCU20 = 0x0a, - HW_GENERATION_MCU25 = 0x09, -}; - -int checkboard (void) +int checkboard(void) { -#define SDR0_ECID0 0x0080 -#define SDR0_ECID1 0x0081 -#define SDR0_ECID2 0x0082 -#define SDR0_ECID3 0x0083 - unsigned j; - uint16_t *hwVersReg = (uint16_t *) HCU_HW_VERSION_REGISTER; - uint16_t *boardVersReg = (uint16_t *) HCU_CPLD_VERSION_REGISTER; - uint16_t generation = *boardVersReg & 0xf0; - uint16_t index = *boardVersReg & 0x0f; - ulong ecid0, ecid1, ecid2, ecid3; - printf ("Netstal Maschinen AG: "); + unsigned int j; + u16 *hwVersReg = (u16 *) HCU_HW_VERSION_REGISTER; + u16 *boardVersReg = (u16 *) HCU_CPLD_VERSION_REGISTER; + u16 generation = *boardVersReg & 0xf0; + u16 index = *boardVersReg & 0x0f; + u32 ecid0, ecid1, ecid2, ecid3; + + printf("Netstal Maschinen AG: "); if (generation == HW_GENERATION_HCU3) - printf ("HCU3: index %d", index); + printf("HCU3: index %d", index); else if (generation == HW_GENERATION_HCU4) - printf ("HCU4: index %d", index); + printf("HCU4: index %d", index); else if (generation == HW_GENERATION_HCU5) - printf ("HCU5: index %d", index); - printf (" HW 0x%02x\n", *hwVersReg & 0xff); + printf("HCU5: index %d", index); + printf(" HW 0x%02x\n", *hwVersReg & 0xff); mfsdr(SDR0_ECID0, ecid0); mfsdr(SDR0_ECID1, ecid1); mfsdr(SDR0_ECID2, ecid2); mfsdr(SDR0_ECID3, ecid3); - printf("Chip ID 0x%x 0x%x 0x%x 0x%x\n", ecid0, ecid1, ecid2, ecid3); - for (j=0; j < 6;j++) { + printf("Chip ID 0x%x 0x%x 0x%x 0x%x\n", ecid0, ecid1, ecid2, ecid3); + for (j = 0;j < 6; j++) { sysLedSet(1 << j); - udelay(200*1000); + udelay(200 * 1000); } + return 0; } -#define SYS_IO_ADDRESS 0xcce00000 - u32 sysLedGet(void) { return in16(SYS_IO_ADDRESS) & 0x3f; @@ -232,9 +234,10 @@ void sysLedSet(u32 value /* value to place in LEDs */) static u32 getSerialNr(void) { u32 *serial = (u32 *)CFG_FLASH_BASE; - if (*serial == 0xffffffff) { + + if (*serial == 0xffffffff) return get_ticks(); - } + return *serial; } @@ -242,45 +245,44 @@ static u32 getSerialNr(void) /*---------------------------------------------------------------------------+ * misc_init_r. *---------------------------------------------------------------------------*/ - -#define DEFAULT_ETH_ADDR "ethaddr" -/* ethaddr for first or etha1ddr for second ethernet */ - int misc_init_r(void) { char *s = getenv(DEFAULT_ETH_ADDR); char *e; int i; - u32 serial = getSerialNr(); + u32 serial = getSerialNr(); unsigned long usb2d0cr = 0; unsigned long usb2phy0cr, usb2h0cr = 0; unsigned long sdr0_pfc1; for (i = 0; i < 6; ++i) { - gd->bd->bi_enetaddr[i] = s ? simple_strtoul (s, &e, 16) : 0; + gd->bd->bi_enetaddr[i] = s ? simple_strtoul(s, &e, 16) : 0; if (s) s = (*e) ? e + 1 : e; } + if (gd->bd->bi_enetaddr[3] == 0 && gd->bd->bi_enetaddr[4] == 0 && gd->bd->bi_enetaddr[5] == 0) { char ethaddr[22]; + /* Must be in sync with CONFIG_ETHADDR */ gd->bd->bi_enetaddr[0] = 0x00; gd->bd->bi_enetaddr[1] = 0x60; gd->bd->bi_enetaddr[2] = 0x13; - gd->bd->bi_enetaddr[3] = (serial >> 16) & 0xff; - gd->bd->bi_enetaddr[4] = (serial >> 8) & 0xff; + gd->bd->bi_enetaddr[3] = (serial >> 16) & 0xff; + gd->bd->bi_enetaddr[4] = (serial >> 8) & 0xff; /* byte[5].bit 0 must be zero */ - gd->bd->bi_enetaddr[5] = (serial >> 0) & 0xfe; - sprintf (ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X\0", - gd->bd->bi_enetaddr[0], gd->bd->bi_enetaddr[1], - gd->bd->bi_enetaddr[2], gd->bd->bi_enetaddr[3], - gd->bd->bi_enetaddr[4], gd->bd->bi_enetaddr[5]) ; + gd->bd->bi_enetaddr[5] = (serial >> 0) & 0xfe; + sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X\0", + gd->bd->bi_enetaddr[0], gd->bd->bi_enetaddr[1], + gd->bd->bi_enetaddr[2], gd->bd->bi_enetaddr[3], + gd->bd->bi_enetaddr[4], gd->bd->bi_enetaddr[5]) ; printf("%s: Setting eth %s serial 0x%x\n", __FUNCTION__, ethaddr, serial); - setenv (DEFAULT_ETH_ADDR, ethaddr); + setenv(DEFAULT_ETH_ADDR, ethaddr); } + #ifdef CFG_ENV_IS_IN_FLASH /* Monitor protection ON by default */ (void)flash_protect(FLAG_PROTECT_SET, @@ -334,9 +336,9 @@ int misc_init_r(void) mtsdr(SDR0_USB2H0CR, usb2h0cr); /*clear resets*/ - udelay (1000); + udelay(1000); mtsdr(SDR0_SRST1, 0x00000000); - udelay (1000); + udelay(1000); mtsdr(SDR0_SRST0, 0x00000000); printf("USB: Host(int phy) Device(ext phy)\n"); @@ -356,7 +358,7 @@ int misc_init_r(void) * certain pre-initialization actions. * ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) +#if defined(CONFIG_PCI) int pci_pre_init(struct pci_controller *hose) { unsigned long addr; @@ -374,7 +376,7 @@ int pci_pre_init(struct pci_controller *hose) mfsdr(sdr_amp1, addr); mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00); addr = mfdcr(plb3_acr); - // mtdcr(plb3_acr, addr & ~plb1_acr_wrp_mask); /* ngngng */ + /* mtdcr(plb3_acr, addr & ~plb1_acr_wrp_mask); */ /* ngngng */ mtdcr(plb3_acr, addr | 0x80000000); /* Sequoia */ /*-------------------------------------------------------------------+ @@ -383,7 +385,7 @@ int pci_pre_init(struct pci_controller *hose) mfsdr(sdr_amp0, addr); mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00); addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */ -// mtdcr(plb4_acr, addr & ~plb1_acr_wrp_mask); /* ngngng */ + /* mtdcr(plb4_acr, addr & ~plb1_acr_wrp_mask); */ /* ngngng */ mtdcr(plb4_acr, addr); /* Sequoia */ /*-------------------------------------------------------------------+ @@ -393,24 +395,23 @@ int pci_pre_init(struct pci_controller *hose) addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair; addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled; addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep; -// addr = (addr & ~plb0_acr_wrp_mask) ; /* ngngng */ + /* addr = (addr & ~plb0_acr_wrp_mask); */ /* ngngng */ addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep; /* Sequoia */ - // mtdcr(plb0_acr, addr); /* Sequoia */ - mtdcr(plb0_acr, 0); // PATCH HAB: WRITE PIPELINING OFF - + /* mtdcr(plb0_acr, addr); */ /* Sequoia */ + mtdcr(plb0_acr, 0); /* PATCH HAB: WRITE PIPELINING OFF */ /* Segment1 */ addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair; addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled; addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep; addr = (addr & ~plb1_acr_wrp_mask) ; - // mtdcr(plb1_acr, addr); /* Sequoia */ - mtdcr(plb1_acr, 0); // PATCH HAB: WRITE PIPELINING OFF + /* mtdcr(plb1_acr, addr); */ /* Sequoia */ + mtdcr(plb1_acr, 0); /* PATCH HAB: WRITE PIPELINING OFF */ return 1; } -#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */ +#endif /* defined(CONFIG_PCI) */ /************************************************************************* * pci_target_init @@ -476,7 +477,6 @@ void pci_target_init(struct pci_controller *hose) pci_write_config_word(0, PCI_ERREN, 0); pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); - } #endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */ @@ -523,4 +523,3 @@ int is_pci_host(struct pci_controller *hose) return 1; } #endif /* defined(CONFIG_PCI) */ - diff --git a/board/netstal/hcu5/init.S b/board/netstal/hcu5/init.S index 6da5f22ce38..5ab6cd24d76 100644 --- a/board/netstal/hcu5/init.S +++ b/board/netstal/hcu5/init.S @@ -55,7 +55,7 @@ tlbtab: tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I ) /* TLB-entry for EBC (CFG_CPLD) */ - // tlbentry( CFG_CPLD, SZ_1K, CFG_CPLD, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) + /* tlbentry( CFG_CPLD, SZ_1K, CFG_CPLD, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) */ /* CAN */ tlbentry( CFG_CS_1, SZ_16M, CFG_CS_1, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) /* IMC + CPLD */ @@ -77,5 +77,3 @@ tlbtab: /* TLB for SDRAM will be added by initdram (sdram.c) */ tlbtab_end - - diff --git a/board/netstal/hcu5/sdram.c b/board/netstal/hcu5/sdram.c index f7d6865a309..40391958d21 100644 --- a/board/netstal/hcu5/sdram.c +++ b/board/netstal/hcu5/sdram.c @@ -216,8 +216,9 @@ long int initdram (int board_type) { #define HCU_HW_SDRAM_CONFIG_MASK 0x7 #define INVALID_HW_CONFIG "Invalid HW-Config" - uint16_t *hwVersReg = (uint16_t *) HCU_HW_VERSION_REGISTER; - unsigned int dram_size=0; + u16 *hwVersReg = (u16 *) HCU_HW_VERSION_REGISTER; + unsigned int dram_size = 0; + mtsdram(DDR0_02, 0x00000000); /* Values must be kept in sync with Excel-table <> ! */ @@ -229,15 +230,15 @@ long int initdram (int board_type) switch (*hwVersReg & HCU_HW_SDRAM_CONFIG_MASK) { case 0: dram_size = 128 * 1024 * 1024 ; - mtsdram(DDR0_06, 0x0102C80D); // 128MB RAM - mtsdram(DDR0_11, 0x000FC800); // 128MB RAM - mtsdram(DDR0_43, 0x030A0300); // 128MB RAM + mtsdram(DDR0_06, 0x0102C80D); /* 128MB RAM */ + mtsdram(DDR0_11, 0x000FC800); /* 128MB RAM */ + mtsdram(DDR0_43, 0x030A0300); /* 128MB RAM */ break; case 1: dram_size = 256 * 1024 * 1024 ; - mtsdram(DDR0_06, 0x0102C812); // 256MB RAM - mtsdram(DDR0_11, 0x0014C800); // 256MB RAM - mtsdram(DDR0_43, 0x030A0200); // 256MB RAM + mtsdram(DDR0_06, 0x0102C812); /* 256MB RAM */ + mtsdram(DDR0_11, 0x0014C800); /* 256MB RAM */ + mtsdram(DDR0_43, 0x030A0200); /* 256MB RAM */ break; default: sdram_panic(INVALID_HW_CONFIG); @@ -245,8 +246,10 @@ long int initdram (int board_type) } dram_size -= 16 * 1024 * 1024; mtsdram(DDR0_07, 0x00090100); - // TCPD=200 cycles of clock input is required to lock the DLL. - // CKE must be HIGH the entire time.mtsdram(DDR0_08, 0x02C80001); + /* + * TCPD=200 cycles of clock input is required to lock the DLL. + * CKE must be HIGH the entire time.mtsdram(DDR0_08, 0x02C80001); + */ mtsdram(DDR0_08, 0x02C80001); mtsdram(DDR0_09, 0x00011D5F); mtsdram(DDR0_10, 0x00000100); diff --git a/include/configs/hcu4.h b/include/configs/hcu4.h index 8779db9afe2..9e45e903d2d 100644 --- a/include/configs/hcu4.h +++ b/include/configs/hcu4.h @@ -312,8 +312,6 @@ #define CONFIG_PORT_ADDR 0xF0000500 - - /*----------------------------------------------------------------------- * Cache Configuration *----------------------------------------------------------------------*/ @@ -333,7 +331,7 @@ #define CFG_HUSH_PARSER /* use "hush" command parser */ #ifdef CFG_HUSH_PARSER - #define CFG_PROMPT_HUSH_PS2 "> " +#define CFG_PROMPT_HUSH_PS2 "> " #endif #if (CONFIG_COMMANDS & CFG_CMD_KGDB) diff --git a/include/configs/hcu5.h b/include/configs/hcu5.h index 87f6948df05..fa6ca37534f 100644 --- a/include/configs/hcu5.h +++ b/include/configs/hcu5.h @@ -236,8 +236,6 @@ #define CONFIG_DOS_PARTITION #define CONFIG_ISO_PARTITION -// CFG_CMD_FLASH | - #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ CFG_CMD_ASKENV | \ CFG_CMD_BSP | \ @@ -301,7 +299,6 @@ #define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/ /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT #define CFG_PCI_MASTER_INIT @@ -389,4 +386,3 @@ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif #endif /* __CONFIG_H */ - -- cgit v1.3.1 From c74b2108e31fe09bd1c5d291c3cf360510d4f13e Mon Sep 17 00:00:00 2001 From: Sergey Kubushyn Date: Fri, 10 Aug 2007 20:26:18 +0200 Subject: [ARM] TI DaVinci support, hopefully final Add support for the following DaVinci boards: - DV_EVM - SCHMOOGIE - SONATA Changes: - Split into separate board directories - Removed changes to MTD_DEBUG (or whatever it's called) - New CONFIG_CMD party line followed - Some cosmetic fixes, cleanup etc. - Patches against the latest U-Boot tree as of now. - Fixed CONFIG_CMD_NET in net files. - Fixed CONFIG_CMD_EEPROM for schmoogie. - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and DV_EVM. Can't check if it works on SONATA, don't have a board any more, but it at least compiles. Here is an excerpt from session log on SCHMOOGIE... U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17) DRAM: 128 MB NAND: 128 MiB In: serial Out: serial Err: serial ARM Clock : 297MHz DDR Clock : 162MHz ETH PHY : DP83848 @ 0x01 U-Boot > iprobe Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F U-Boot > ping 192.168.253.10 host 192.168.253.10 is alive U-Boot > Signed-off-by: Sergey Kubushyn Acked-by: Dirk Behme Acked-by: Zach Sadecki Acked-by: Stefan Roese --- CREDITS | 4 + MAINTAINERS | 6 + MAKEALL | 3 +- Makefile | 9 + board/davinci/dv-evm/Makefile | 52 +++ board/davinci/dv-evm/board_init.S | 29 ++ board/davinci/dv-evm/config.mk | 39 ++ board/davinci/dv-evm/dv_board.c | 211 +++++++++ board/davinci/dv-evm/u-boot.lds | 52 +++ board/davinci/schmoogie/Makefile | 52 +++ board/davinci/schmoogie/board_init.S | 29 ++ board/davinci/schmoogie/config.mk | 39 ++ board/davinci/schmoogie/dv_board.c | 253 +++++++++++ board/davinci/schmoogie/u-boot.lds | 52 +++ board/davinci/sonata/Makefile | 52 +++ board/davinci/sonata/board_init.S | 100 +++++ board/davinci/sonata/config.mk | 39 ++ board/davinci/sonata/dv_board.c | 208 +++++++++ board/davinci/sonata/u-boot.lds | 52 +++ common/cmd_nvedit.c | 15 +- cpu/arm926ejs/davinci/Makefile | 49 +++ cpu/arm926ejs/davinci/dp83848.c | 156 +++++++ cpu/arm926ejs/davinci/ether.c | 652 ++++++++++++++++++++++++++++ cpu/arm926ejs/davinci/i2c.c | 351 +++++++++++++++ cpu/arm926ejs/davinci/lowlevel_init.S | 707 +++++++++++++++++++++++++++++++ cpu/arm926ejs/davinci/lxt972.c | 142 +++++++ cpu/arm926ejs/davinci/nand.c | 389 +++++++++++++++++ cpu/arm926ejs/davinci/reset.S | 77 ++++ cpu/arm926ejs/davinci/timer.c | 165 ++++++++ include/_exports.h | 3 + include/asm-arm/arch-davinci/emac_defs.h | 311 ++++++++++++++ include/asm-arm/arch-davinci/emif_defs.h | 61 +++ include/asm-arm/arch-davinci/hardware.h | 166 ++++++++ include/asm-arm/arch-davinci/i2c_defs.h | 94 ++++ include/asm-arm/arch-davinci/nand_defs.h | 161 +++++++ include/common.h | 3 + include/configs/davinci_dvevm.h | 214 ++++++++++ include/configs/davinci_schmoogie.h | 157 +++++++ include/configs/davinci_sonata.h | 209 +++++++++ include/dp83848.h | 88 ++++ include/exports.h | 3 + lib_arm/board.c | 7 + net/eth.c | 5 + 43 files changed, 5464 insertions(+), 2 deletions(-) create mode 100644 board/davinci/dv-evm/Makefile create mode 100644 board/davinci/dv-evm/board_init.S create mode 100644 board/davinci/dv-evm/config.mk create mode 100644 board/davinci/dv-evm/dv_board.c create mode 100644 board/davinci/dv-evm/u-boot.lds create mode 100644 board/davinci/schmoogie/Makefile create mode 100644 board/davinci/schmoogie/board_init.S create mode 100644 board/davinci/schmoogie/config.mk create mode 100644 board/davinci/schmoogie/dv_board.c create mode 100644 board/davinci/schmoogie/u-boot.lds create mode 100644 board/davinci/sonata/Makefile create mode 100644 board/davinci/sonata/board_init.S create mode 100644 board/davinci/sonata/config.mk create mode 100644 board/davinci/sonata/dv_board.c create mode 100644 board/davinci/sonata/u-boot.lds create mode 100644 cpu/arm926ejs/davinci/Makefile create mode 100644 cpu/arm926ejs/davinci/dp83848.c create mode 100644 cpu/arm926ejs/davinci/ether.c create mode 100644 cpu/arm926ejs/davinci/i2c.c create mode 100644 cpu/arm926ejs/davinci/lowlevel_init.S create mode 100644 cpu/arm926ejs/davinci/lxt972.c create mode 100644 cpu/arm926ejs/davinci/nand.c create mode 100644 cpu/arm926ejs/davinci/reset.S create mode 100644 cpu/arm926ejs/davinci/timer.c create mode 100644 include/asm-arm/arch-davinci/emac_defs.h create mode 100644 include/asm-arm/arch-davinci/emif_defs.h create mode 100644 include/asm-arm/arch-davinci/hardware.h create mode 100644 include/asm-arm/arch-davinci/i2c_defs.h create mode 100644 include/asm-arm/arch-davinci/nand_defs.h create mode 100644 include/configs/davinci_dvevm.h create mode 100644 include/configs/davinci_schmoogie.h create mode 100644 include/configs/davinci_sonata.h create mode 100644 include/dp83848.h (limited to 'Makefile') diff --git a/CREDITS b/CREDITS index 7af1b806ab0..4c8b896f215 100644 --- a/CREDITS +++ b/CREDITS @@ -252,6 +252,10 @@ E: Raghu.Krishnaprasad@fci.com D: Support for Adder-II MPC852T evaluation board W: http://www.forcecomputers.com +N: Sergey Kubushyn +E: ksi@koi8.net +D: Support for various TI DaVinci based boards. + N: Bernhard Kuhn E: bkuhn@metrowerks.com D Support for Coldfire CPU; Support for Motorola M5272C3 and M5282EVB boards diff --git a/MAINTAINERS b/MAINTAINERS index 693b1157290..865f6fe0e12 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -444,6 +444,12 @@ Nishant Kamat omap1610h2 ARM926EJS +Sergey Kubushyn + + DV-EVM ARM926EJS + SONATA ARM926EJS + SCHMOOGIE ARM926EJS + Prakash Kumar cerf250 xscale diff --git a/MAKEALL b/MAKEALL index 3e186ccd5a3..c672b514be4 100755 --- a/MAKEALL +++ b/MAKEALL @@ -220,7 +220,8 @@ LIST_ARM9=" \ omap1610h2 omap1610inn omap730p2 sbc2410x \ scb9328 smdk2400 smdk2410 trab \ VCMA9 versatile versatileab versatilepb \ - voiceblue \ + voiceblue davinci_dvevm davinci_schmoogie \ + davinci_sonata " ######################################################################### diff --git a/Makefile b/Makefile index 0e6d3992dbe..87ddb1c933d 100644 --- a/Makefile +++ b/Makefile @@ -2018,6 +2018,15 @@ omap1510inn_config : unconfig omap5912osk_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk NULL omap +davinci_dvevm_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs dv-evm davinci davinci + +davinci_schmoogie_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci + +davinci_sonata_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci + omap1610inn_config \ omap1610inn_cs0boot_config \ omap1610inn_cs3boot_config \ diff --git a/board/davinci/dv-evm/Makefile b/board/davinci/dv-evm/Makefile new file mode 100644 index 00000000000..fa0013811d4 --- /dev/null +++ b/board/davinci/dv-evm/Makefile @@ -0,0 +1,52 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# Copyright (C) 2007 Sergey Kubushyn +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := dv_board.o +SOBJS := board_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak *~ .depend + +######################################################################### +# This is for $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/davinci/dv-evm/board_init.S b/board/davinci/dv-evm/board_init.S new file mode 100644 index 00000000000..22d8adc18ca --- /dev/null +++ b/board/davinci/dv-evm/board_init.S @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2007 Sergey Kubushyn + * + * Board-specific low level initialization code. Called at the very end + * of cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no + * initialization required. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +.globl dv_board_init +dv_board_init: + + mov pc, lr diff --git a/board/davinci/dv-evm/config.mk b/board/davinci/dv-evm/config.mk new file mode 100644 index 00000000000..aa89d0ec8ae --- /dev/null +++ b/board/davinci/dv-evm/config.mk @@ -0,0 +1,39 @@ +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, +# David Mueller, ELSOFT AG, +# +# (C) Copyright 2003 +# Texas Instruments, +# Swaminathan +# +# Davinci EVM board (ARM925EJS) cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# Davinci EVM has 1 bank of 256 MB DDR RAM +# Physical Address: +# 8000'0000 to 9000'0000 +# +# Copyright (C) 2007 Sergey Kubushyn +# +# Visioneering Corp. Sonata board (ARM926EJS) cpu +# +# Sonata board has 1 bank of 128 MB DDR RAM +# Physical Address: +# 8000'0000 to 8800'0000 +# +# Razorstream, LLC. SCHMOOGIE board (ARM926EJS) cpu +# +# Schmoogie board has 1 bank of 128 MB DDR RAM +# Physical Address: +# 8000'0000 to 8800'0000 +# +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) +# +# we load ourself to 8108 '0000 +# +# + +#Provide at least 16MB spacing between us and the Linux Kernel image +TEXT_BASE = 0x81080000 diff --git a/board/davinci/dv-evm/dv_board.c b/board/davinci/dv-evm/dv_board.c new file mode 100644 index 00000000000..94925ecfb14 --- /dev/null +++ b/board/davinci/dv-evm/dv_board.c @@ -0,0 +1,211 @@ +/* + * Copyright (C) 2007 Sergey Kubushyn + * + * Parts are shamelessly stolen from various TI sources, original copyright + * follows: + * ----------------------------------------------------------------- + * + * Copyright (C) 2004 Texas Instruments. + * + * ---------------------------------------------------------------------------- + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * ---------------------------------------------------------------------------- + */ + +#include +#include +#include +#include + +#define MACH_TYPE_DAVINCI_EVM 901 + +extern void i2c_init(int speed, int slaveaddr); +extern void timer_init(void); +extern int eth_hw_init(void); +extern phy_t phy; + + +/* Works on Always On power domain only (no PD argument) */ +void lpsc_on(unsigned int id) +{ + dv_reg_p mdstat, mdctl; + + if (id >= DAVINCI_LPSC_GEM) + return; /* Don't work on DSP Power Domain */ + + mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4)); + mdctl = REG_P(PSC_MDCTL_BASE + (id * 4)); + + while (REG(PSC_PTSTAT) & 0x01) {;} + + if ((*mdstat & 0x1f) == 0x03) + return; /* Already on and enabled */ + + *mdctl |= 0x03; + + /* Special treatment for some modules as for sprue14 p.7.4.2 */ + if ( (id == DAVINCI_LPSC_VPSSSLV) || + (id == DAVINCI_LPSC_EMAC) || + (id == DAVINCI_LPSC_EMAC_WRAPPER) || + (id == DAVINCI_LPSC_MDIO) || + (id == DAVINCI_LPSC_USB) || + (id == DAVINCI_LPSC_ATA) || + (id == DAVINCI_LPSC_VLYNQ) || + (id == DAVINCI_LPSC_UHPI) || + (id == DAVINCI_LPSC_DDR_EMIF) || + (id == DAVINCI_LPSC_AEMIF) || + (id == DAVINCI_LPSC_MMC_SD) || + (id == DAVINCI_LPSC_MEMSTICK) || + (id == DAVINCI_LPSC_McBSP) || + (id == DAVINCI_LPSC_GPIO) + ) + *mdctl |= 0x200; + + REG(PSC_PTCMD) = 0x01; + + while (REG(PSC_PTSTAT) & 0x03) {;} + while ((*mdstat & 0x1f) != 0x03) {;} /* Probably an overkill... */ +} + +void dsp_on(void) +{ + int i; + + if (REG(PSC_PDSTAT1) & 0x1f) + return; /* Already on */ + + REG(PSC_GBLCTL) |= 0x01; + REG(PSC_PDCTL1) |= 0x01; + REG(PSC_PDCTL1) &= ~0x100; + REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03; + REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff; + REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03; + REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff; + REG(PSC_PTCMD) = 0x02; + + for (i = 0; i < 100; i++) { + if (REG(PSC_EPCPR) & 0x02) + break; + } + + REG(PSC_CHP_SHRTSW) = 0x01; + REG(PSC_PDCTL1) |= 0x100; + REG(PSC_EPCCR) = 0x02; + + for (i = 0; i < 100; i++) { + if (!(REG(PSC_PTSTAT) & 0x02)) + break; + } + + REG(PSC_GBLCTL) &= ~0x1f; +} + + +int board_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + /* arch number of the board */ + gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_EVM; + + /* address of boot parameters */ + gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; + + /* Workaround for TMS320DM6446 errata 1.3.22 */ + REG(PSC_SILVER_BULLET) = 0; + + /* Power on required peripherals */ + lpsc_on(DAVINCI_LPSC_EMAC); + lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER); + lpsc_on(DAVINCI_LPSC_MDIO); + lpsc_on(DAVINCI_LPSC_I2C); + lpsc_on(DAVINCI_LPSC_UART0); + lpsc_on(DAVINCI_LPSC_TIMER1); + lpsc_on(DAVINCI_LPSC_GPIO); + + /* Powerup the DSP */ + dsp_on(); + + /* Bringup UART0 out of reset */ + REG(UART0_PWREMU_MGMT) = 0x0000e003; + + /* Enable GIO3.3V cells used for EMAC */ + REG(VDD3P3V_PWDN) = 0; + + /* Enable UART0 MUX lines */ + REG(PINMUX1) |= 1; + + /* Enable EMAC and AEMIF pins */ + REG(PINMUX0) = 0x80000c1f; + + /* Enable I2C pin Mux */ + REG(PINMUX1) |= (1 << 7); + + /* Set the Bus Priority Register to appropriate value */ + REG(VBPR) = 0x20; + + timer_init(); + + return(0); +} + +int misc_init_r (void) +{ + u_int8_t tmp[20], buf[10]; + int i = 0; + int clk = 0; + + clk = ((REG(PLL2_PLLM) + 1) * 27) / ((REG(PLL2_DIV2) & 0x1f) + 1); + + printf ("ARM Clock : %dMHz\n", ((REG(PLL1_PLLM) + 1) * 27 ) / 2); + printf ("DDR Clock : %dMHz\n", (clk / 2)); + + /* Set Ethernet MAC address from EEPROM */ + if (i2c_read(CFG_I2C_EEPROM_ADDR, 0x7f00, CFG_I2C_EEPROM_ADDR_LEN, buf, 6)) { + printf("\nEEPROM @ 0x%02x read FAILED!!!\n", CFG_I2C_EEPROM_ADDR); + } else { + tmp[0] = 0xff; + for (i = 0; i < 6; i++) + tmp[0] &= buf[i]; + + if ((tmp[0] != 0xff) && (getenv("ethaddr") == NULL)) { + sprintf((char *)&tmp[0], "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx", + buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]); + setenv("ethaddr", (char *)&tmp[0]); + } + } + + if (!eth_hw_init()) { + printf("ethernet init failed!\n"); + } else { + printf("ETH PHY : %s\n", phy.name); + } + + i2c_read (0x39, 0x00, 1, (u_int8_t *)&i, 1); + + setenv ("videostd", ((i & 0x80) ? "pal" : "ntsc")); + + return(0); +} + +int dram_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + return(0); +} diff --git a/board/davinci/dv-evm/u-boot.lds b/board/davinci/dv-evm/u-boot.lds new file mode 100644 index 00000000000..710b2a2d6e6 --- /dev/null +++ b/board/davinci/dv-evm/u-boot.lds @@ -0,0 +1,52 @@ +/* + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + . = ALIGN(4); + .text : + { + cpu/arm926ejs/start.o (.text) + *(.text) + } + . = ALIGN(4); + .rodata : { *(.rodata) } + . = ALIGN(4); + .data : { *(.data) } + . = ALIGN(4); + .got : { *(.got) } + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/board/davinci/schmoogie/Makefile b/board/davinci/schmoogie/Makefile new file mode 100644 index 00000000000..fa0013811d4 --- /dev/null +++ b/board/davinci/schmoogie/Makefile @@ -0,0 +1,52 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# Copyright (C) 2007 Sergey Kubushyn +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := dv_board.o +SOBJS := board_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak *~ .depend + +######################################################################### +# This is for $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/davinci/schmoogie/board_init.S b/board/davinci/schmoogie/board_init.S new file mode 100644 index 00000000000..22d8adc18ca --- /dev/null +++ b/board/davinci/schmoogie/board_init.S @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2007 Sergey Kubushyn + * + * Board-specific low level initialization code. Called at the very end + * of cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no + * initialization required. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +.globl dv_board_init +dv_board_init: + + mov pc, lr diff --git a/board/davinci/schmoogie/config.mk b/board/davinci/schmoogie/config.mk new file mode 100644 index 00000000000..aa89d0ec8ae --- /dev/null +++ b/board/davinci/schmoogie/config.mk @@ -0,0 +1,39 @@ +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, +# David Mueller, ELSOFT AG, +# +# (C) Copyright 2003 +# Texas Instruments, +# Swaminathan +# +# Davinci EVM board (ARM925EJS) cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# Davinci EVM has 1 bank of 256 MB DDR RAM +# Physical Address: +# 8000'0000 to 9000'0000 +# +# Copyright (C) 2007 Sergey Kubushyn +# +# Visioneering Corp. Sonata board (ARM926EJS) cpu +# +# Sonata board has 1 bank of 128 MB DDR RAM +# Physical Address: +# 8000'0000 to 8800'0000 +# +# Razorstream, LLC. SCHMOOGIE board (ARM926EJS) cpu +# +# Schmoogie board has 1 bank of 128 MB DDR RAM +# Physical Address: +# 8000'0000 to 8800'0000 +# +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) +# +# we load ourself to 8108 '0000 +# +# + +#Provide at least 16MB spacing between us and the Linux Kernel image +TEXT_BASE = 0x81080000 diff --git a/board/davinci/schmoogie/dv_board.c b/board/davinci/schmoogie/dv_board.c new file mode 100644 index 00000000000..b15c5f71893 --- /dev/null +++ b/board/davinci/schmoogie/dv_board.c @@ -0,0 +1,253 @@ +/* + * Copyright (C) 2007 Sergey Kubushyn + * + * Parts are shamelessly stolen from various TI sources, original copyright + * follows: + * ----------------------------------------------------------------- + * + * Copyright (C) 2004 Texas Instruments. + * + * ---------------------------------------------------------------------------- + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * ---------------------------------------------------------------------------- + */ + +#include +#include +#include +#include + +#define MACH_TYPE_SCHMOOGIE 1255 + +extern void i2c_init(int speed, int slaveaddr); +extern void timer_init(void); +extern int eth_hw_init(void); +extern phy_t phy; + + +/* Works on Always On power domain only (no PD argument) */ +void lpsc_on(unsigned int id) +{ + dv_reg_p mdstat, mdctl; + + if (id >= DAVINCI_LPSC_GEM) + return; /* Don't work on DSP Power Domain */ + + mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4)); + mdctl = REG_P(PSC_MDCTL_BASE + (id * 4)); + + while (REG(PSC_PTSTAT) & 0x01) {;} + + if ((*mdstat & 0x1f) == 0x03) + return; /* Already on and enabled */ + + *mdctl |= 0x03; + + /* Special treatment for some modules as for sprue14 p.7.4.2 */ + if ( (id == DAVINCI_LPSC_VPSSSLV) || + (id == DAVINCI_LPSC_EMAC) || + (id == DAVINCI_LPSC_EMAC_WRAPPER) || + (id == DAVINCI_LPSC_MDIO) || + (id == DAVINCI_LPSC_USB) || + (id == DAVINCI_LPSC_ATA) || + (id == DAVINCI_LPSC_VLYNQ) || + (id == DAVINCI_LPSC_UHPI) || + (id == DAVINCI_LPSC_DDR_EMIF) || + (id == DAVINCI_LPSC_AEMIF) || + (id == DAVINCI_LPSC_MMC_SD) || + (id == DAVINCI_LPSC_MEMSTICK) || + (id == DAVINCI_LPSC_McBSP) || + (id == DAVINCI_LPSC_GPIO) + ) + *mdctl |= 0x200; + + REG(PSC_PTCMD) = 0x01; + + while (REG(PSC_PTSTAT) & 0x03) {;} + while ((*mdstat & 0x1f) != 0x03) {;} /* Probably an overkill... */ +} + +void dsp_on(void) +{ + int i; + + if (REG(PSC_PDSTAT1) & 0x1f) + return; /* Already on */ + + REG(PSC_GBLCTL) |= 0x01; + REG(PSC_PDCTL1) |= 0x01; + REG(PSC_PDCTL1) &= ~0x100; + REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03; + REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff; + REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03; + REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff; + REG(PSC_PTCMD) = 0x02; + + for (i = 0; i < 100; i++) { + if (REG(PSC_EPCPR) & 0x02) + break; + } + + REG(PSC_CHP_SHRTSW) = 0x01; + REG(PSC_PDCTL1) |= 0x100; + REG(PSC_EPCCR) = 0x02; + + for (i = 0; i < 100; i++) { + if (!(REG(PSC_PTSTAT) & 0x02)) + break; + } + + REG(PSC_GBLCTL) &= ~0x1f; +} + + +int board_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + /* arch number of the board */ + gd->bd->bi_arch_number = MACH_TYPE_SCHMOOGIE; + + /* address of boot parameters */ + gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; + + /* Workaround for TMS320DM6446 errata 1.3.22 */ + REG(PSC_SILVER_BULLET) = 0; + + /* Power on required peripherals */ + lpsc_on(DAVINCI_LPSC_EMAC); + lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER); + lpsc_on(DAVINCI_LPSC_MDIO); + lpsc_on(DAVINCI_LPSC_I2C); + lpsc_on(DAVINCI_LPSC_UART0); + lpsc_on(DAVINCI_LPSC_TIMER1); + lpsc_on(DAVINCI_LPSC_GPIO); + + /* Powerup the DSP */ + dsp_on(); + + /* Bringup UART0 out of reset */ + REG(UART0_PWREMU_MGMT) = 0x0000e003; + + /* Enable GIO3.3V cells used for EMAC */ + REG(VDD3P3V_PWDN) = 0; + + /* Enable UART0 MUX lines */ + REG(PINMUX1) |= 1; + + /* Enable EMAC and AEMIF pins */ + REG(PINMUX0) = 0x80000c1f; + + /* Enable I2C pin Mux */ + REG(PINMUX1) |= (1 << 7); + + /* Set the Bus Priority Register to appropriate value */ + REG(VBPR) = 0x20; + + timer_init(); + + return(0); +} + +int misc_init_r (void) +{ + u_int8_t tmp[20], buf[10]; + int i = 0; + int clk = 0; + + /* Set serial number from UID chip */ + u_int8_t crc_tbl[256] = { + 0x00, 0x5e, 0xbc, 0xe2, 0x61, 0x3f, 0xdd, 0x83, + 0xc2, 0x9c, 0x7e, 0x20, 0xa3, 0xfd, 0x1f, 0x41, + 0x9d, 0xc3, 0x21, 0x7f, 0xfc, 0xa2, 0x40, 0x1e, + 0x5f, 0x01, 0xe3, 0xbd, 0x3e, 0x60, 0x82, 0xdc, + 0x23, 0x7d, 0x9f, 0xc1, 0x42, 0x1c, 0xfe, 0xa0, + 0xe1, 0xbf, 0x5d, 0x03, 0x80, 0xde, 0x3c, 0x62, + 0xbe, 0xe0, 0x02, 0x5c, 0xdf, 0x81, 0x63, 0x3d, + 0x7c, 0x22, 0xc0, 0x9e, 0x1d, 0x43, 0xa1, 0xff, + 0x46, 0x18, 0xfa, 0xa4, 0x27, 0x79, 0x9b, 0xc5, + 0x84, 0xda, 0x38, 0x66, 0xe5, 0xbb, 0x59, 0x07, + 0xdb, 0x85, 0x67, 0x39, 0xba, 0xe4, 0x06, 0x58, + 0x19, 0x47, 0xa5, 0xfb, 0x78, 0x26, 0xc4, 0x9a, + 0x65, 0x3b, 0xd9, 0x87, 0x04, 0x5a, 0xb8, 0xe6, + 0xa7, 0xf9, 0x1b, 0x45, 0xc6, 0x98, 0x7a, 0x24, + 0xf8, 0xa6, 0x44, 0x1a, 0x99, 0xc7, 0x25, 0x7b, + 0x3a, 0x64, 0x86, 0xd8, 0x5b, 0x05, 0xe7, 0xb9, + 0x8c, 0xd2, 0x30, 0x6e, 0xed, 0xb3, 0x51, 0x0f, + 0x4e, 0x10, 0xf2, 0xac, 0x2f, 0x71, 0x93, 0xcd, + 0x11, 0x4f, 0xad, 0xf3, 0x70, 0x2e, 0xcc, 0x92, + 0xd3, 0x8d, 0x6f, 0x31, 0xb2, 0xec, 0x0e, 0x50, + 0xaf, 0xf1, 0x13, 0x4d, 0xce, 0x90, 0x72, 0x2c, + 0x6d, 0x33, 0xd1, 0x8f, 0x0c, 0x52, 0xb0, 0xee, + 0x32, 0x6c, 0x8e, 0xd0, 0x53, 0x0d, 0xef, 0xb1, + 0xf0, 0xae, 0x4c, 0x12, 0x91, 0xcf, 0x2d, 0x73, + 0xca, 0x94, 0x76, 0x28, 0xab, 0xf5, 0x17, 0x49, + 0x08, 0x56, 0xb4, 0xea, 0x69, 0x37, 0xd5, 0x8b, + 0x57, 0x09, 0xeb, 0xb5, 0x36, 0x68, 0x8a, 0xd4, + 0x95, 0xcb, 0x29, 0x77, 0xf4, 0xaa, 0x48, 0x16, + 0xe9, 0xb7, 0x55, 0x0b, 0x88, 0xd6, 0x34, 0x6a, + 0x2b, 0x75, 0x97, 0xc9, 0x4a, 0x14, 0xf6, 0xa8, + 0x74, 0x2a, 0xc8, 0x96, 0x15, 0x4b, 0xa9, 0xf7, + 0xb6, 0xe8, 0x0a, 0x54, 0xd7, 0x89, 0x6b, 0x35 + }; + + clk = ((REG(PLL2_PLLM) + 1) * 27) / ((REG(PLL2_DIV2) & 0x1f) + 1); + + printf ("ARM Clock : %dMHz\n", ((REG(PLL1_PLLM) + 1) * 27 ) / 2); + printf ("DDR Clock : %dMHz\n", (clk / 2)); + + /* Set serial number from UID chip */ + if (i2c_read(CFG_UID_ADDR, 0, 1, buf, 8)) { + printf("\nUID @ 0x%02x read FAILED!!!\n", CFG_UID_ADDR); + forceenv("serial#", "FAILED"); + } else { + if (buf[0] != 0x70) { /* Device Family Code */ + printf("\nUID @ 0x%02x read FAILED!!!\n", CFG_UID_ADDR); + forceenv("serial#", "FAILED"); + } + } + /* Now check CRC */ + tmp[0] = 0; + for (i = 0; i < 8; i++) + tmp[0] = crc_tbl[tmp[0] ^ buf[i]]; + + if (tmp[0] != 0) { + printf("\nUID @ 0x%02x - BAD CRC!!!\n", CFG_UID_ADDR); + forceenv("serial#", "FAILED"); + } else { + /* CRC OK, set "serial" env variable */ + sprintf((char *)&tmp[0], "%02hhx%02hhx%02hhx%02hhx%02hhx%02hhx", + buf[6], buf[5], buf[4], buf[3], buf[2], buf[1]); + forceenv("serial#", (char *)&tmp[0]); + } + + if (!eth_hw_init()) { + printf("ethernet init failed!\n"); + } else { + printf("ETH PHY : %s\n", phy.name); + } + + return(0); +} + +int dram_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + return(0); +} diff --git a/board/davinci/schmoogie/u-boot.lds b/board/davinci/schmoogie/u-boot.lds new file mode 100644 index 00000000000..710b2a2d6e6 --- /dev/null +++ b/board/davinci/schmoogie/u-boot.lds @@ -0,0 +1,52 @@ +/* + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + . = ALIGN(4); + .text : + { + cpu/arm926ejs/start.o (.text) + *(.text) + } + . = ALIGN(4); + .rodata : { *(.rodata) } + . = ALIGN(4); + .data : { *(.data) } + . = ALIGN(4); + .got : { *(.got) } + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/board/davinci/sonata/Makefile b/board/davinci/sonata/Makefile new file mode 100644 index 00000000000..fa0013811d4 --- /dev/null +++ b/board/davinci/sonata/Makefile @@ -0,0 +1,52 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# Copyright (C) 2007 Sergey Kubushyn +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := dv_board.o +SOBJS := board_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak *~ .depend + +######################################################################### +# This is for $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/davinci/sonata/board_init.S b/board/davinci/sonata/board_init.S new file mode 100644 index 00000000000..fbb9ea73e9f --- /dev/null +++ b/board/davinci/sonata/board_init.S @@ -0,0 +1,100 @@ +/* + * Copyright (C) 2007 Sergey Kubushyn + * + * Board-specific low level initialization code. Called at the very end + * of cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no + * initialization required. + * + * For _OLDER_ Sonata boards sets up GPIO4 to control NAND WP line. Newer + * Sonata boards, AFAIK, don't use this so it's just return by default. Ask + * Visioneering if they reinvented the wheel once again to make sure :) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +.globl dv_board_init +dv_board_init: +#ifdef SONATA_BOARD_GPIOWP + /* Set PINMUX0 to enable GPIO4 */ + ldr r0, _PINMUX0 + ldr r1, GPIO4_EN_MASK + ldr r2, [r0] + and r2, r2, r1 + str r2, [r0] + + /* Enable GPIO LPSC module */ + ldr r0, PTSTAT + +gpio_ptstat_loop1: + ldr r2, [r0] + tst r2, $0x00000001 + bne gpio_ptstat_loop1 + + ldr r1, MDCTL_GPIO + ldr r2, [r1] + and r2, r2, $0xfffffff8 + orr r2, r2, $0x00000003 + str r2, [r1] + + orr r2, r2, $0x00000200 + str r2, [r1] + + ldr r1, PTCMD + mov r2, $0x00000001 + str r2, [r1] + +gpio_ptstat_loop2: + ldr r2, [r0] + tst r2, $0x00000001 + bne gpio_ptstat_loop2 + + ldr r0, MDSTAT_GPIO +gpio_mdstat_loop: + ldr r2, [r0] + and r2, r2, $0x0000001f + teq r2, $0x00000003 + bne gpio_mdstat_loop + + /* GPIO4 -> output */ + ldr r0, GPIO_DIR01 + mov r1, $0x10 + ldr r2, [r0] + bic r2, r2, r0 + str r2, [r0] + + /* Set it to 0 (Write Protect) */ + ldr r0, GPIO_CLR_DATA01 + str r1, [r0] +#endif + + mov pc, lr + +#ifdef SONATA_BOARD_GPIOWP +.ltorg + +GPIO4_EN_MASK: + .word 0xf77fffff +MDCTL_GPIO: + .word 0x01c41a68 +MDSTAT_GPIO: + .word 0x01c41868 +GPIO_DIR01: + .word 0x01c67010 +GPIO_CLR_DATA01: + .word 0x01c6701c +#endif diff --git a/board/davinci/sonata/config.mk b/board/davinci/sonata/config.mk new file mode 100644 index 00000000000..aa89d0ec8ae --- /dev/null +++ b/board/davinci/sonata/config.mk @@ -0,0 +1,39 @@ +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, +# David Mueller, ELSOFT AG, +# +# (C) Copyright 2003 +# Texas Instruments, +# Swaminathan +# +# Davinci EVM board (ARM925EJS) cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# Davinci EVM has 1 bank of 256 MB DDR RAM +# Physical Address: +# 8000'0000 to 9000'0000 +# +# Copyright (C) 2007 Sergey Kubushyn +# +# Visioneering Corp. Sonata board (ARM926EJS) cpu +# +# Sonata board has 1 bank of 128 MB DDR RAM +# Physical Address: +# 8000'0000 to 8800'0000 +# +# Razorstream, LLC. SCHMOOGIE board (ARM926EJS) cpu +# +# Schmoogie board has 1 bank of 128 MB DDR RAM +# Physical Address: +# 8000'0000 to 8800'0000 +# +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) +# +# we load ourself to 8108 '0000 +# +# + +#Provide at least 16MB spacing between us and the Linux Kernel image +TEXT_BASE = 0x81080000 diff --git a/board/davinci/sonata/dv_board.c b/board/davinci/sonata/dv_board.c new file mode 100644 index 00000000000..7b0a459fa31 --- /dev/null +++ b/board/davinci/sonata/dv_board.c @@ -0,0 +1,208 @@ +/* + * Copyright (C) 2007 Sergey Kubushyn + * + * Parts are shamelessly stolen from various TI sources, original copyright + * follows: + * ----------------------------------------------------------------- + * + * Copyright (C) 2004 Texas Instruments. + * + * ---------------------------------------------------------------------------- + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * ---------------------------------------------------------------------------- + */ + +#include +#include +#include +#include + +#define MACH_TYPE_SONATA 1254 + +extern void i2c_init(int speed, int slaveaddr); +extern void timer_init(void); +extern int eth_hw_init(void); +extern phy_t phy; + + +/* Works on Always On power domain only (no PD argument) */ +void lpsc_on(unsigned int id) +{ + dv_reg_p mdstat, mdctl; + + if (id >= DAVINCI_LPSC_GEM) + return; /* Don't work on DSP Power Domain */ + + mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4)); + mdctl = REG_P(PSC_MDCTL_BASE + (id * 4)); + + while (REG(PSC_PTSTAT) & 0x01) {;} + + if ((*mdstat & 0x1f) == 0x03) + return; /* Already on and enabled */ + + *mdctl |= 0x03; + + /* Special treatment for some modules as for sprue14 p.7.4.2 */ + if ( (id == DAVINCI_LPSC_VPSSSLV) || + (id == DAVINCI_LPSC_EMAC) || + (id == DAVINCI_LPSC_EMAC_WRAPPER) || + (id == DAVINCI_LPSC_MDIO) || + (id == DAVINCI_LPSC_USB) || + (id == DAVINCI_LPSC_ATA) || + (id == DAVINCI_LPSC_VLYNQ) || + (id == DAVINCI_LPSC_UHPI) || + (id == DAVINCI_LPSC_DDR_EMIF) || + (id == DAVINCI_LPSC_AEMIF) || + (id == DAVINCI_LPSC_MMC_SD) || + (id == DAVINCI_LPSC_MEMSTICK) || + (id == DAVINCI_LPSC_McBSP) || + (id == DAVINCI_LPSC_GPIO) + ) + *mdctl |= 0x200; + + REG(PSC_PTCMD) = 0x01; + + while (REG(PSC_PTSTAT) & 0x03) {;} + while ((*mdstat & 0x1f) != 0x03) {;} /* Probably an overkill... */ +} + +void dsp_on(void) +{ + int i; + + if (REG(PSC_PDSTAT1) & 0x1f) + return; /* Already on */ + + REG(PSC_GBLCTL) |= 0x01; + REG(PSC_PDCTL1) |= 0x01; + REG(PSC_PDCTL1) &= ~0x100; + REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03; + REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff; + REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03; + REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff; + REG(PSC_PTCMD) = 0x02; + + for (i = 0; i < 100; i++) { + if (REG(PSC_EPCPR) & 0x02) + break; + } + + REG(PSC_CHP_SHRTSW) = 0x01; + REG(PSC_PDCTL1) |= 0x100; + REG(PSC_EPCCR) = 0x02; + + for (i = 0; i < 100; i++) { + if (!(REG(PSC_PTSTAT) & 0x02)) + break; + } + + REG(PSC_GBLCTL) &= ~0x1f; +} + + +int board_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + /* arch number of the board */ + gd->bd->bi_arch_number = MACH_TYPE_SONATA; + + /* address of boot parameters */ + gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; + + /* Workaround for TMS320DM6446 errata 1.3.22 */ + REG(PSC_SILVER_BULLET) = 0; + + /* Power on required peripherals */ + lpsc_on(DAVINCI_LPSC_EMAC); + lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER); + lpsc_on(DAVINCI_LPSC_MDIO); + lpsc_on(DAVINCI_LPSC_I2C); + lpsc_on(DAVINCI_LPSC_UART0); + lpsc_on(DAVINCI_LPSC_TIMER1); + lpsc_on(DAVINCI_LPSC_GPIO); + + /* Powerup the DSP */ + dsp_on(); + + /* Bringup UART0 out of reset */ + REG(UART0_PWREMU_MGMT) = 0x0000e003; + + /* Enable GIO3.3V cells used for EMAC */ + REG(VDD3P3V_PWDN) = 0; + + /* Enable UART0 MUX lines */ + REG(PINMUX1) |= 1; + + /* Enable EMAC and AEMIF pins */ + REG(PINMUX0) = 0x80000c1f; + + /* Enable I2C pin Mux */ + REG(PINMUX1) |= (1 << 7); + + /* Set the Bus Priority Register to appropriate value */ + REG(VBPR) = 0x20; + + timer_init(); + + return(0); +} + +int misc_init_r (void) +{ + u_int8_t tmp[20], buf[10]; + int i = 0; + int clk = 0; + + + clk = ((REG(PLL2_PLLM) + 1) * 27) / ((REG(PLL2_DIV2) & 0x1f) + 1); + + printf ("ARM Clock : %dMHz\n", ((REG(PLL1_PLLM) + 1) * 27 ) / 2); + printf ("DDR Clock : %dMHz\n", (clk / 2)); + + /* Set Ethernet MAC address from EEPROM */ + if (i2c_read(CFG_I2C_EEPROM_ADDR, 0x7f00, CFG_I2C_EEPROM_ADDR_LEN, buf, 6)) { + printf("\nEEPROM @ 0x%02x read FAILED!!!\n", CFG_I2C_EEPROM_ADDR); + } else { + tmp[0] = 0xff; + for (i = 0; i < 6; i++) + tmp[0] &= buf[i]; + + if ((tmp[0] != 0xff) && (getenv("ethaddr") == NULL)) { + sprintf((char *)&tmp[0], "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx", + buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]); + setenv("ethaddr", (char *)&tmp[0]); + } + } + + if (!eth_hw_init()) { + printf("ethernet init failed!\n"); + } else { + printf("ETH PHY : %s\n", phy.name); + } + + return(0); +} + +int dram_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + return(0); +} diff --git a/board/davinci/sonata/u-boot.lds b/board/davinci/sonata/u-boot.lds new file mode 100644 index 00000000000..710b2a2d6e6 --- /dev/null +++ b/board/davinci/sonata/u-boot.lds @@ -0,0 +1,52 @@ +/* + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + . = ALIGN(4); + .text : + { + cpu/arm926ejs/start.o (.text) + *(.text) + } + . = ALIGN(4); + .rodata : { *(.rodata) } + . = ALIGN(4); + .data : { *(.data) } + . = ALIGN(4); + .got : { *(.got) } + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c index de5a5148f69..1db0fc3c03b 100644 --- a/common/cmd_nvedit.c +++ b/common/cmd_nvedit.c @@ -193,7 +193,12 @@ int _do_setenv (int flag, int argc, char *argv[]) * Ethernet Address and serial# can be set only once, * ver is readonly. */ +#ifdef CONFIG_HAS_UID + /* Allow serial# forced overwrite with 0xdeaf4add flag */ + if ( ((strcmp (name, "serial#") == 0) && (flag != 0xdeaf4add)) || +#else if ( (strcmp (name, "serial#") == 0) || +#endif ((strcmp (name, "ethaddr") == 0) #if defined(CONFIG_OVERWRITE_ETHADDR_ONCE) && defined(CONFIG_ETHADDR) && (strcmp ((char *)env_get_addr(oldval),MK_STR(CONFIG_ETHADDR)) != 0) @@ -397,7 +402,15 @@ void setenv (char *varname, char *varvalue) _do_setenv (0, 3, argv); } -int do_setenv ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +#ifdef CONFIG_HAS_UID +void forceenv (char *varname, char *varvalue) +{ + char *argv[4] = { "forceenv", varname, varvalue, NULL }; + _do_setenv (0xdeaf4add, 3, argv); +} +#endif + +int do_setenv (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { if (argc < 2) { printf ("Usage:\n%s\n", cmdtp->usage); diff --git a/cpu/arm926ejs/davinci/Makefile b/cpu/arm926ejs/davinci/Makefile new file mode 100644 index 00000000000..0f77f402ed8 --- /dev/null +++ b/cpu/arm926ejs/davinci/Makefile @@ -0,0 +1,49 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# Copyright (C) 2007 Sergey Kubushyn +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).a + +COBJS = timer.o ether.o lxt972.o dp83848.o i2c.o nand.o +SOBJS = lowlevel_init.o reset.o + +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/cpu/arm926ejs/davinci/dp83848.c b/cpu/arm926ejs/davinci/dp83848.c new file mode 100644 index 00000000000..5719845b340 --- /dev/null +++ b/cpu/arm926ejs/davinci/dp83848.c @@ -0,0 +1,156 @@ +/* + * National Semiconductor DP83848 PHY Driver for TI DaVinci + * (TMS320DM644x) based boards. + * + * Copyright (C) 2007 Sergey Kubushyn + * + * -------------------------------------------------------- + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include + +#ifdef CONFIG_DRIVER_TI_EMAC + +#ifdef CONFIG_CMD_NET + +int dp83848_is_phy_connected(int phy_addr) +{ + u_int16_t id1, id2; + + if (!dm644x_eth_phy_read(phy_addr, DP83848_PHYID1_REG, &id1)) + return(0); + if (!dm644x_eth_phy_read(phy_addr, DP83848_PHYID2_REG, &id2)) + return(0); + + if ((id1 == DP83848_PHYID1_OUI) && (id2 == DP83848_PHYID2_OUI)) + return(1); + + return(0); +} + +int dp83848_get_link_speed(int phy_addr) +{ + u_int16_t tmp; + volatile emac_regs* emac = (emac_regs *)EMAC_BASE_ADDR; + + if (!dm644x_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp)) + return(0); + + if (!(tmp & DP83848_LINK_STATUS)) /* link up? */ + return(0); + + if (!dm644x_eth_phy_read(phy_addr, DP83848_PHY_STAT_REG, &tmp)) + return(0); + + /* Speed doesn't matter, there is no setting for it in EMAC... */ + if (tmp & DP83848_SPEED) { + if (tmp & DP83848_DUPLEX) { + /* set DM644x EMAC for Full Duplex */ + emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE | EMAC_MACCONTROL_FULLDUPLEX_ENABLE; + } else { + /*set DM644x EMAC for Half Duplex */ + emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE; + } + + return(1); + } else { + if (tmp & DP83848_DUPLEX) { + /* set DM644x EMAC for Full Duplex */ + emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE | EMAC_MACCONTROL_FULLDUPLEX_ENABLE; + } else { + /*set DM644x EMAC for Half Duplex */ + emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE; + } + + return(1); + } + + return(0); +} + + +int dp83848_init_phy(int phy_addr) +{ + int ret = 1; + + if (!dp83848_get_link_speed(phy_addr)) { + /* Try another time */ + udelay(100000); + ret = dp83848_get_link_speed(phy_addr); + } + + /* Disable PHY Interrupts */ + dm644x_eth_phy_write(phy_addr, DP83848_PHY_INTR_CTRL_REG, 0); + + return(ret); +} + + +int dp83848_auto_negotiate(int phy_addr) +{ + u_int16_t tmp; + + + if (!dm644x_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp)) + return(0); + + /* Restart Auto_negotiation */ + tmp &= ~DP83848_AUTONEG; /* remove autonegotiation enable */ + tmp |= DP83848_ISOLATE; /* Electrically isolate PHY */ + dm644x_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp); + + /* Set the Auto_negotiation Advertisement Register + * MII advertising for Next page, 100BaseTxFD and HD, + * 10BaseTFD and HD, IEEE 802.3 + */ + tmp = DP83848_NP | DP83848_TX_FDX | DP83848_TX_HDX | + DP83848_10_FDX | DP83848_10_HDX | DP83848_AN_IEEE_802_3; + dm644x_eth_phy_write(phy_addr, DP83848_ANA_REG, tmp); + + + /* Read Control Register */ + if (!dm644x_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp)) + return(0); + + tmp |= DP83848_SPEED_SELECT | DP83848_AUTONEG | DP83848_DUPLEX_MODE; + dm644x_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp); + + /* Restart Auto_negotiation */ + tmp |= DP83848_RESTART_AUTONEG; + dm644x_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp); + + /*check AutoNegotiate complete */ + udelay(10000); + if (!dm644x_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp)) + return(0); + + if (!(tmp & DP83848_AUTONEG_COMP)) + return(0); + + return (dp83848_get_link_speed(phy_addr)); +} + +#endif /* CONFIG_CMD_NET */ + +#endif /* CONFIG_DRIVER_ETHER */ diff --git a/cpu/arm926ejs/davinci/ether.c b/cpu/arm926ejs/davinci/ether.c new file mode 100644 index 00000000000..9ec1ee70bf7 --- /dev/null +++ b/cpu/arm926ejs/davinci/ether.c @@ -0,0 +1,652 @@ +/* + * Ethernet driver for TI TMS320DM644x (DaVinci) chips. + * + * Copyright (C) 2007 Sergey Kubushyn + * + * Parts shamelessly stolen from TI's dm644x_emac.c. Original copyright + * follows: + * + * ---------------------------------------------------------------------------- + * + * dm644x_emac.c + * + * TI DaVinci (DM644X) EMAC peripheral driver source for DV-EVM + * + * Copyright (C) 2005 Texas Instruments. + * + * ---------------------------------------------------------------------------- + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * ---------------------------------------------------------------------------- + + * Modifications: + * ver. 1.0: Sep 2005, Anant Gole - Created EMAC version for uBoot. + * ver 1.1: Nov 2005, Anant Gole - Extended the RX logic for multiple descriptors + * + */ +#include +#include +#include +#include +#include + +#ifdef CONFIG_DRIVER_TI_EMAC + +#ifdef CONFIG_CMD_NET + +unsigned int emac_dbg = 0; +#define debug_emac(fmt,args...) if (emac_dbg) printf(fmt,##args) + +/* Internal static functions */ +static int dm644x_eth_hw_init (void); +static int dm644x_eth_open (void); +static int dm644x_eth_close (void); +static int dm644x_eth_send_packet (volatile void *packet, int length); +static int dm644x_eth_rcv_packet (void); +static void dm644x_eth_mdio_enable(void); + +static int gen_init_phy(int phy_addr); +static int gen_is_phy_connected(int phy_addr); +static int gen_get_link_speed(int phy_addr); +static int gen_auto_negotiate(int phy_addr); + +/* Wrappers exported to the U-Boot proper */ +int eth_hw_init(void) +{ + return(dm644x_eth_hw_init()); +} + +int eth_init(bd_t * bd) +{ + return(dm644x_eth_open()); +} + +void eth_halt(void) +{ + dm644x_eth_close(); +} + +int eth_send(volatile void *packet, int length) +{ + return(dm644x_eth_send_packet(packet, length)); +} + +int eth_rx(void) +{ + return(dm644x_eth_rcv_packet()); +} + +void eth_mdio_enable(void) +{ + dm644x_eth_mdio_enable(); +} +/* End of wrappers */ + + +static u_int8_t dm644x_eth_mac_addr[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; + +/* + * This function must be called before emac_open() if you want to override + * the default mac address. + */ +void dm644x_eth_set_mac_addr(const u_int8_t *addr) +{ + int i; + + for (i = 0; i < sizeof (dm644x_eth_mac_addr); i++) { + dm644x_eth_mac_addr[i] = addr[i]; + } +} + +/* EMAC Addresses */ +static volatile emac_regs *adap_emac = (emac_regs *)EMAC_BASE_ADDR; +static volatile ewrap_regs *adap_ewrap = (ewrap_regs *)EMAC_WRAPPER_BASE_ADDR; +static volatile mdio_regs *adap_mdio = (mdio_regs *)EMAC_MDIO_BASE_ADDR; + +/* EMAC descriptors */ +static volatile emac_desc *emac_rx_desc = (emac_desc *)(EMAC_WRAPPER_RAM_ADDR + EMAC_RX_DESC_BASE); +static volatile emac_desc *emac_tx_desc = (emac_desc *)(EMAC_WRAPPER_RAM_ADDR + EMAC_TX_DESC_BASE); +static volatile emac_desc *emac_rx_active_head = 0; +static volatile emac_desc *emac_rx_active_tail = 0; +static int emac_rx_queue_active = 0; + +/* Receive packet buffers */ +static unsigned char emac_rx_buffers[EMAC_MAX_RX_BUFFERS * (EMAC_MAX_ETHERNET_PKT_SIZE + EMAC_PKT_ALIGN)]; + +/* PHY address for a discovered PHY (0xff - not found) */ +static volatile u_int8_t active_phy_addr = 0xff; + +phy_t phy; + +static void dm644x_eth_mdio_enable(void) +{ + u_int32_t clkdiv; + + clkdiv = (EMAC_MDIO_BUS_FREQ / EMAC_MDIO_CLOCK_FREQ) - 1; + + adap_mdio->CONTROL = (clkdiv & 0xff) | + MDIO_CONTROL_ENABLE | + MDIO_CONTROL_FAULT | + MDIO_CONTROL_FAULT_ENABLE; + + while (adap_mdio->CONTROL & MDIO_CONTROL_IDLE) {;} +} + +/* + * Tries to find an active connected PHY. Returns 1 if address if found. + * If no active PHY (or more than one PHY) found returns 0. + * Sets active_phy_addr variable. + */ +static int dm644x_eth_phy_detect(void) +{ + u_int32_t phy_act_state; + int i; + + active_phy_addr = 0xff; + + if ((phy_act_state = adap_mdio->ALIVE) == 0) + return(0); /* No active PHYs */ + + debug_emac("dm644x_eth_phy_detect(), ALIVE = 0x%08x\n", phy_act_state); + + for (i = 0; i < 32; i++) { + if (phy_act_state & (1 << i)) { + if (phy_act_state & ~(1 << i)) + return(0); /* More than one PHY */ + else { + active_phy_addr = i; + return(1); + } + } + } + + return(0); /* Just to make GCC happy */ +} + + +/* Read a PHY register via MDIO inteface. Returns 1 on success, 0 otherwise */ +int dm644x_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data) +{ + int tmp; + + while (adap_mdio->USERACCESS0 & MDIO_USERACCESS0_GO) {;} + + adap_mdio->USERACCESS0 = MDIO_USERACCESS0_GO | + MDIO_USERACCESS0_WRITE_READ | + ((reg_num & 0x1f) << 21) | + ((phy_addr & 0x1f) << 16); + + /* Wait for command to complete */ + while ((tmp = adap_mdio->USERACCESS0) & MDIO_USERACCESS0_GO) {;} + + if (tmp & MDIO_USERACCESS0_ACK) { + *data = tmp & 0xffff; + return(1); + } + + *data = -1; + return(0); +} + +/* Write to a PHY register via MDIO inteface. Blocks until operation is complete. */ +int dm644x_eth_phy_write(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data) +{ + + while (adap_mdio->USERACCESS0 & MDIO_USERACCESS0_GO) {;} + + adap_mdio->USERACCESS0 = MDIO_USERACCESS0_GO | + MDIO_USERACCESS0_WRITE_WRITE | + ((reg_num & 0x1f) << 21) | + ((phy_addr & 0x1f) << 16) | + (data & 0xffff); + + /* Wait for command to complete */ + while (adap_mdio->USERACCESS0 & MDIO_USERACCESS0_GO) {;} + + return(1); +} + +/* PHY functions for a generic PHY */ +static int gen_init_phy(int phy_addr) +{ + int ret = 1; + + if (gen_get_link_speed(phy_addr)) { + /* Try another time */ + ret = gen_get_link_speed(phy_addr); + } + + return(ret); +} + +static int gen_is_phy_connected(int phy_addr) +{ + u_int16_t dummy; + + return(dm644x_eth_phy_read(phy_addr, PHY_PHYIDR1, &dummy)); +} + +static int gen_get_link_speed(int phy_addr) +{ + u_int16_t tmp; + + if (dm644x_eth_phy_read(phy_addr, MII_STATUS_REG, &tmp) && (tmp & 0x04)) + return(1); + + return(0); +} + +static int gen_auto_negotiate(int phy_addr) +{ + u_int16_t tmp; + + + if (!dm644x_eth_phy_read(phy_addr, PHY_BMCR, &tmp)) + return(0); + + /* Restart Auto_negotiation */ + tmp |= PHY_BMCR_AUTON; + dm644x_eth_phy_write(phy_addr, PHY_BMCR, tmp); + + /*check AutoNegotiate complete */ + udelay (10000); + if (!dm644x_eth_phy_read(phy_addr, PHY_BMSR, &tmp)) + return(0); + + if (!(tmp & PHY_BMSR_AUTN_COMP)) + return(0); + + return(gen_get_link_speed(phy_addr)); +} +/* End of generic PHY functions */ + + + +#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII) +static int dm644x_mii_phy_read(char *devname, unsigned char addr, unsigned char reg, unsigned short *value) +{ + return(dm644x_eth_phy_read(addr, reg, value) ? 0 : 1); +} + +static int dm644x_mii_phy_write(char *devname, unsigned char addr, unsigned char reg, unsigned short value) +{ + return(dm644x_eth_phy_write(addr, reg, value) ? 0 : 1); +} + +int dm644x_eth_miiphy_initialize(bd_t *bis) +{ + miiphy_register(phy.name, dm644x_mii_phy_read, dm644x_mii_phy_write); + + return(1); +} +#endif + +/* + * This function initializes the emac hardware. It does NOT initialize + * EMAC modules power or pin multiplexors, that is done by board_init() + * much earlier in bootup process. Returns 1 on success, 0 otherwise. + */ +static int dm644x_eth_hw_init(void) +{ + u_int32_t phy_id; + u_int16_t tmp; + int i; + + dm644x_eth_mdio_enable(); + + for (i = 0; i < 256; i++) { + if (adap_mdio->ALIVE) + break; + udelay(10); + } + + if (i >= 256) { + printf("No ETH PHY detected!!!\n"); + return(0); + } + + /* Find if a PHY is connected and get it's address */ + if (!dm644x_eth_phy_detect()) + return(0); + + /* Get PHY ID and initialize phy_ops for a detected PHY */ + if (!dm644x_eth_phy_read(active_phy_addr, PHY_PHYIDR1, &tmp)) { + active_phy_addr = 0xff; + return(0); + } + + phy_id = (tmp << 16) & 0xffff0000; + + if (!dm644x_eth_phy_read(active_phy_addr, PHY_PHYIDR2, &tmp)) { + active_phy_addr = 0xff; + return(0); + } + + phy_id |= tmp & 0x0000ffff; + + switch (phy_id) { + case PHY_LXT972: + sprintf(phy.name, "LXT972 @ 0x%02x", active_phy_addr); + phy.init = lxt972_init_phy; + phy.is_phy_connected = lxt972_is_phy_connected; + phy.get_link_speed = lxt972_get_link_speed; + phy.auto_negotiate = lxt972_auto_negotiate; + break; + case PHY_DP83848: + sprintf(phy.name, "DP83848 @ 0x%02x", active_phy_addr); + phy.init = dp83848_init_phy; + phy.is_phy_connected = dp83848_is_phy_connected; + phy.get_link_speed = dp83848_get_link_speed; + phy.auto_negotiate = dp83848_auto_negotiate; + break; + default: + sprintf(phy.name, "GENERIC @ 0x%02x", active_phy_addr); + phy.init = gen_init_phy; + phy.is_phy_connected = gen_is_phy_connected; + phy.get_link_speed = gen_get_link_speed; + phy.auto_negotiate = gen_auto_negotiate; + } + + return(1); +} + + +/* Eth device open */ +static int dm644x_eth_open(void) +{ + dv_reg_p addr; + u_int32_t clkdiv, cnt; + volatile emac_desc *rx_desc; + + debug_emac("+ emac_open\n"); + + /* Reset EMAC module and disable interrupts in wrapper */ + adap_emac->SOFTRESET = 1; + while (adap_emac->SOFTRESET != 0) {;} + adap_ewrap->EWCTL = 0; + for (cnt = 0; cnt < 5; cnt++) { + clkdiv = adap_ewrap->EWCTL; + } + + rx_desc = emac_rx_desc; + + adap_emac->TXCONTROL = 0x01; + adap_emac->RXCONTROL = 0x01; + + /* Set MAC Addresses & Init multicast Hash to 0 (disable any multicast receive) */ + /* Using channel 0 only - other channels are disabled */ + adap_emac->MACINDEX = 0; + adap_emac->MACADDRHI = + (dm644x_eth_mac_addr[3] << 24) | + (dm644x_eth_mac_addr[2] << 16) | + (dm644x_eth_mac_addr[1] << 8) | + (dm644x_eth_mac_addr[0]); + adap_emac->MACADDRLO = + (dm644x_eth_mac_addr[5] << 8) | + (dm644x_eth_mac_addr[4]); + + adap_emac->MACHASH1 = 0; + adap_emac->MACHASH2 = 0; + + /* Set source MAC address - REQUIRED */ + adap_emac->MACSRCADDRHI = + (dm644x_eth_mac_addr[3] << 24) | + (dm644x_eth_mac_addr[2] << 16) | + (dm644x_eth_mac_addr[1] << 8) | + (dm644x_eth_mac_addr[0]); + adap_emac->MACSRCADDRLO = + (dm644x_eth_mac_addr[4] << 8) | + (dm644x_eth_mac_addr[5]); + + /* Set DMA 8 TX / 8 RX Head pointers to 0 */ + addr = &adap_emac->TX0HDP; + for(cnt = 0; cnt < 16; cnt++) + *addr++ = 0; + + addr = &adap_emac->RX0HDP; + for(cnt = 0; cnt < 16; cnt++) + *addr++ = 0; + + /* Clear Statistics (do this before setting MacControl register) */ + addr = &adap_emac->RXGOODFRAMES; + for(cnt = 0; cnt < EMAC_NUM_STATS; cnt++) + *addr++ = 0; + + /* No multicast addressing */ + adap_emac->MACHASH1 = 0; + adap_emac->MACHASH2 = 0; + + /* Create RX queue and set receive process in place */ + emac_rx_active_head = emac_rx_desc; + for (cnt = 0; cnt < EMAC_MAX_RX_BUFFERS; cnt++) { + rx_desc->next = (u_int32_t)(rx_desc + 1); + rx_desc->buffer = &emac_rx_buffers[cnt * (EMAC_MAX_ETHERNET_PKT_SIZE + EMAC_PKT_ALIGN)]; + rx_desc->buff_off_len = EMAC_MAX_ETHERNET_PKT_SIZE; + rx_desc->pkt_flag_len = EMAC_CPPI_OWNERSHIP_BIT; + rx_desc++; + } + + /* Set the last descriptor's "next" parameter to 0 to end the RX desc list */ + rx_desc--; + rx_desc->next = 0; + emac_rx_active_tail = rx_desc; + emac_rx_queue_active = 1; + + /* Enable TX/RX */ + adap_emac->RXMAXLEN = EMAC_MAX_ETHERNET_PKT_SIZE; + adap_emac->RXBUFFEROFFSET = 0; + + /* No fancy configs - Use this for promiscous for debug - EMAC_RXMBPENABLE_RXCAFEN_ENABLE */ + adap_emac->RXMBPENABLE = EMAC_RXMBPENABLE_RXBROADEN; + + /* Enable ch 0 only */ + adap_emac->RXUNICASTSET = 0x01; + + /* Enable MII interface and Full duplex mode */ + adap_emac->MACCONTROL = (EMAC_MACCONTROL_MIIEN_ENABLE | EMAC_MACCONTROL_FULLDUPLEX_ENABLE); + + /* Init MDIO & get link state */ + clkdiv = (EMAC_MDIO_BUS_FREQ / EMAC_MDIO_CLOCK_FREQ) - 1; + adap_mdio->CONTROL = ((clkdiv & 0xff) | MDIO_CONTROL_ENABLE | MDIO_CONTROL_FAULT); + + if (!phy.get_link_speed(active_phy_addr)) + return(0); + + /* Start receive process */ + adap_emac->RX0HDP = (u_int32_t)emac_rx_desc; + + debug_emac("- emac_open\n"); + + return(1); +} + +/* EMAC Channel Teardown */ +static void dm644x_eth_ch_teardown(int ch) +{ + dv_reg dly = 0xff; + dv_reg cnt; + + debug_emac("+ emac_ch_teardown\n"); + + if (ch == EMAC_CH_TX) { + /* Init TX channel teardown */ + adap_emac->TXTEARDOWN = 1; + for(cnt = 0; cnt != 0xfffffffc; cnt = adap_emac->TX0CP) { + /* Wait here for Tx teardown completion interrupt to occur + * Note: A task delay can be called here to pend rather than + * occupying CPU cycles - anyway it has been found that teardown + * takes very few cpu cycles and does not affect functionality */ + dly--; + udelay(1); + if (dly == 0) + break; + } + adap_emac->TX0CP = cnt; + adap_emac->TX0HDP = 0; + } else { + /* Init RX channel teardown */ + adap_emac->RXTEARDOWN = 1; + for(cnt = 0; cnt != 0xfffffffc; cnt = adap_emac->RX0CP) { + /* Wait here for Rx teardown completion interrupt to occur + * Note: A task delay can be called here to pend rather than + * occupying CPU cycles - anyway it has been found that teardown + * takes very few cpu cycles and does not affect functionality */ + dly--; + udelay(1); + if (dly == 0) + break; + } + adap_emac->RX0CP = cnt; + adap_emac->RX0HDP = 0; + } + + debug_emac("- emac_ch_teardown\n"); +} + +/* Eth device close */ +static int dm644x_eth_close(void) +{ + debug_emac("+ emac_close\n"); + + dm644x_eth_ch_teardown(EMAC_CH_TX); /* TX Channel teardown */ + dm644x_eth_ch_teardown(EMAC_CH_RX); /* RX Channel teardown */ + + /* Reset EMAC module and disable interrupts in wrapper */ + adap_emac->SOFTRESET = 1; + adap_ewrap->EWCTL = 0; + + debug_emac("- emac_close\n"); + return(1); +} + +static int tx_send_loop = 0; + +/* + * This function sends a single packet on the network and returns + * positive number (number of bytes transmitted) or negative for error + */ +static int dm644x_eth_send_packet(volatile void *packet, int length) +{ + int ret_status = -1; + tx_send_loop = 0; + + /* Return error if no link */ + if (!phy.get_link_speed(active_phy_addr)) + { + printf("WARN: emac_send_packet: No link\n"); + return (ret_status); + } + + /* Check packet size and if < EMAC_MIN_ETHERNET_PKT_SIZE, pad it up */ + if (length < EMAC_MIN_ETHERNET_PKT_SIZE) + { + length = EMAC_MIN_ETHERNET_PKT_SIZE; + } + + /* Populate the TX descriptor */ + emac_tx_desc->next = 0; + emac_tx_desc->buffer = (u_int8_t *)packet; + emac_tx_desc->buff_off_len = (length & 0xffff); + emac_tx_desc->pkt_flag_len = ((length & 0xffff) | + EMAC_CPPI_SOP_BIT | + EMAC_CPPI_OWNERSHIP_BIT | + EMAC_CPPI_EOP_BIT); + /* Send the packet */ + adap_emac->TX0HDP = (unsigned int)emac_tx_desc; + + /* Wait for packet to complete or link down */ + while (1) { + if (!phy.get_link_speed(active_phy_addr)) { + dm644x_eth_ch_teardown(EMAC_CH_TX); + return (ret_status); + } + if (adap_emac->TXINTSTATRAW & 0x01) { + ret_status = length; + break; + } + tx_send_loop++; + } + + return(ret_status); +} + +/* + * This function handles receipt of a packet from the network + */ +static int dm644x_eth_rcv_packet(void) +{ + volatile emac_desc *rx_curr_desc; + volatile emac_desc *curr_desc; + volatile emac_desc *tail_desc; + int status, ret = -1; + + rx_curr_desc = emac_rx_active_head; + status = rx_curr_desc->pkt_flag_len; + if ((rx_curr_desc) && ((status & EMAC_CPPI_OWNERSHIP_BIT) == 0)) { + if (status & EMAC_CPPI_RX_ERROR_FRAME) { + /* Error in packet - discard it and requeue desc */ + printf("WARN: emac_rcv_pkt: Error in packet\n"); + } else { + NetReceive(rx_curr_desc->buffer, (rx_curr_desc->buff_off_len & 0xffff)); + ret = rx_curr_desc->buff_off_len & 0xffff; + } + + /* Ack received packet descriptor */ + adap_emac->RX0CP = (unsigned int)rx_curr_desc; + curr_desc = rx_curr_desc; + emac_rx_active_head = (volatile emac_desc *)rx_curr_desc->next; + + if (status & EMAC_CPPI_EOQ_BIT) { + if (emac_rx_active_head) { + adap_emac->RX0HDP = (unsigned int)emac_rx_active_head; + } else { + emac_rx_queue_active = 0; + printf("INFO:emac_rcv_packet: RX Queue not active\n"); + } + } + + /* Recycle RX descriptor */ + rx_curr_desc->buff_off_len = EMAC_MAX_ETHERNET_PKT_SIZE; + rx_curr_desc->pkt_flag_len = EMAC_CPPI_OWNERSHIP_BIT; + rx_curr_desc->next = 0; + + if (emac_rx_active_head == 0) { + printf("INFO: emac_rcv_pkt: active queue head = 0\n"); + emac_rx_active_head = curr_desc; + emac_rx_active_tail = curr_desc; + if (emac_rx_queue_active != 0) { + adap_emac->RX0HDP = (unsigned int)emac_rx_active_head; + printf("INFO: emac_rcv_pkt: active queue head = 0, HDP fired\n"); + emac_rx_queue_active = 1; + } + } else { + tail_desc = emac_rx_active_tail; + emac_rx_active_tail = curr_desc; + tail_desc->next = (unsigned int)curr_desc; + status = tail_desc->pkt_flag_len; + if (status & EMAC_CPPI_EOQ_BIT) { + adap_emac->RX0HDP = (unsigned int)curr_desc; + status &= ~EMAC_CPPI_EOQ_BIT; + tail_desc->pkt_flag_len = status; + } + } + return(ret); + } + return(0); +} + +#endif /* CONFIG_CMD_NET */ + +#endif /* CONFIG_DRIVER_TI_EMAC */ diff --git a/cpu/arm926ejs/davinci/i2c.c b/cpu/arm926ejs/davinci/i2c.c new file mode 100644 index 00000000000..af9dc034c2a --- /dev/null +++ b/cpu/arm926ejs/davinci/i2c.c @@ -0,0 +1,351 @@ +/* + * TI DaVinci (TMS320DM644x) I2C driver. + * + * Copyright (C) 2007 Sergey Kubushyn + * + * -------------------------------------------------------- + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +#ifdef CONFIG_DRIVER_DAVINCI_I2C + +#include +#include +#include + +#define CHECK_NACK() \ + do {\ + if (tmp & (I2C_TIMEOUT | I2C_STAT_NACK)) {\ + REG(I2C_CON) = 0;\ + return(1);\ + }\ + } while (0) + + +static int wait_for_bus(void) +{ + int stat, timeout; + + REG(I2C_STAT) = 0xffff; + + for (timeout = 0; timeout < 10; timeout++) { + if (!((stat = REG(I2C_STAT)) & I2C_STAT_BB)) { + REG(I2C_STAT) = 0xffff; + return(0); + } + + REG(I2C_STAT) = stat; + udelay(50000); + } + + REG(I2C_STAT) = 0xffff; + return(1); +} + + +static int poll_i2c_irq(int mask) +{ + int stat, timeout; + + for (timeout = 0; timeout < 10; timeout++) { + udelay(1000); + stat = REG(I2C_STAT); + if (stat & mask) { + return(stat); + } + } + + REG(I2C_STAT) = 0xffff; + return(stat | I2C_TIMEOUT); +} + + +void flush_rx(void) +{ + int dummy; + + while (1) { + if (!(REG(I2C_STAT) & I2C_STAT_RRDY)) + break; + + dummy = REG(I2C_DRR); + REG(I2C_STAT) = I2C_STAT_RRDY; + udelay(1000); + } +} + + +void i2c_init(int speed, int slaveadd) +{ + u_int32_t div, psc; + + if (REG(I2C_CON) & I2C_CON_EN) { + REG(I2C_CON) = 0; + udelay (50000); + } + + psc = 2; + div = (CFG_HZ_CLOCK / ((psc + 1) * speed)) - 10; /* SCLL + SCLH */ + REG(I2C_PSC) = psc; /* 27MHz / (2 + 1) = 9MHz */ + REG(I2C_SCLL) = (div * 50) / 100; /* 50% Duty */ + REG(I2C_SCLH) = div - REG(I2C_SCLL); + + REG(I2C_OA) = slaveadd; + REG(I2C_CNT) = 0; + + /* Interrupts must be enabled or I2C module won't work */ + REG(I2C_IE) = I2C_IE_SCD_IE | I2C_IE_XRDY_IE | + I2C_IE_RRDY_IE | I2C_IE_ARDY_IE | I2C_IE_NACK_IE; + + /* Now enable I2C controller (get it out of reset) */ + REG(I2C_CON) = I2C_CON_EN; + + udelay(1000); +} + + +int i2c_probe(u_int8_t chip) +{ + int rc = 1; + + if (chip == REG(I2C_OA)) { + return(rc); + } + + REG(I2C_CON) = 0; + if (wait_for_bus()) {return(1);} + + /* try to read one byte from current (or only) address */ + REG(I2C_CNT) = 1; + REG(I2C_SA) = chip; + REG(I2C_CON) = (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP); + udelay (50000); + + if (!(REG(I2C_STAT) & I2C_STAT_NACK)) { + rc = 0; + flush_rx(); + REG(I2C_STAT) = 0xffff; + } else { + REG(I2C_STAT) = 0xffff; + REG(I2C_CON) |= I2C_CON_STP; + udelay(20000); + if (wait_for_bus()) {return(1);} + } + + flush_rx(); + REG(I2C_STAT) = 0xffff; + REG(I2C_CNT) = 0; + return(rc); +} + + +int i2c_read(u_int8_t chip, u_int32_t addr, int alen, u_int8_t *buf, int len) +{ + u_int32_t tmp; + int i; + + if ((alen < 0) || (alen > 2)) { + printf("%s(): bogus address length %x\n", __FUNCTION__, alen); + return(1); + } + + if (wait_for_bus()) {return(1);} + + if (alen != 0) { + /* Start address phase */ + tmp = I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX; + REG(I2C_CNT) = alen; + REG(I2C_SA) = chip; + REG(I2C_CON) = tmp; + + tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK); + + CHECK_NACK(); + + switch (alen) { + case 2: + /* Send address MSByte */ + if (tmp & I2C_STAT_XRDY) { + REG(I2C_DXR) = (addr >> 8) & 0xff; + } else { + REG(I2C_CON) = 0; + return(1); + } + + tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK); + + CHECK_NACK(); + /* No break, fall through */ + case 1: + /* Send address LSByte */ + if (tmp & I2C_STAT_XRDY) { + REG(I2C_DXR) = addr & 0xff; + } else { + REG(I2C_CON) = 0; + return(1); + } + + tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK | I2C_STAT_ARDY); + + CHECK_NACK(); + + if (!(tmp & I2C_STAT_ARDY)) { + REG(I2C_CON) = 0; + return(1); + } + } + } + + /* Address phase is over, now read 'len' bytes and stop */ + tmp = I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP; + REG(I2C_CNT) = len & 0xffff; + REG(I2C_SA) = chip; + REG(I2C_CON) = tmp; + + for (i = 0; i < len; i++) { + tmp = poll_i2c_irq(I2C_STAT_RRDY | I2C_STAT_NACK | I2C_STAT_ROVR); + + CHECK_NACK(); + + if (tmp & I2C_STAT_RRDY) { + buf[i] = REG(I2C_DRR); + } else { + REG(I2C_CON) = 0; + return(1); + } + } + + tmp = poll_i2c_irq(I2C_STAT_SCD | I2C_STAT_NACK); + + CHECK_NACK(); + + if (!(tmp & I2C_STAT_SCD)) { + REG(I2C_CON) = 0; + return(1); + } + + flush_rx(); + REG(I2C_STAT) = 0xffff; + REG(I2C_CNT) = 0; + REG(I2C_CON) = 0; + + return(0); +} + + +int i2c_write(u_int8_t chip, u_int32_t addr, int alen, u_int8_t *buf, int len) +{ + u_int32_t tmp; + int i; + + if ((alen < 0) || (alen > 2)) { + printf("%s(): bogus address length %x\n", __FUNCTION__, alen); + return(1); + } + if (len < 0) { + printf("%s(): bogus length %x\n", __FUNCTION__, len); + return(1); + } + + if (wait_for_bus()) {return(1);} + + /* Start address phase */ + tmp = I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX | I2C_CON_STP; + REG(I2C_CNT) = (alen == 0) ? len & 0xffff : (len & 0xffff) + alen; + REG(I2C_SA) = chip; + REG(I2C_CON) = tmp; + + switch (alen) { + case 2: + /* Send address MSByte */ + tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK); + + CHECK_NACK(); + + if (tmp & I2C_STAT_XRDY) { + REG(I2C_DXR) = (addr >> 8) & 0xff; + } else { + REG(I2C_CON) = 0; + return(1); + } + /* No break, fall through */ + case 1: + /* Send address LSByte */ + tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK); + + CHECK_NACK(); + + if (tmp & I2C_STAT_XRDY) { + REG(I2C_DXR) = addr & 0xff; + } else { + REG(I2C_CON) = 0; + return(1); + } + } + + for (i = 0; i < len; i++) { + tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK); + + CHECK_NACK(); + + if (tmp & I2C_STAT_XRDY) { + REG(I2C_DXR) = buf[i]; + } else { + return(1); + } + } + + tmp = poll_i2c_irq(I2C_STAT_SCD | I2C_STAT_NACK); + + CHECK_NACK(); + + if (!(tmp & I2C_STAT_SCD)) { + REG(I2C_CON) = 0; + return(1); + } + + flush_rx(); + REG(I2C_STAT) = 0xffff; + REG(I2C_CNT) = 0; + REG(I2C_CON) = 0; + + return(0); +} + + +u_int8_t i2c_reg_read(u_int8_t chip, u_int8_t reg) +{ + u_int8_t tmp; + + i2c_read(chip, reg, 1, &tmp, 1); + return(tmp); +} + + +void i2c_reg_write(u_int8_t chip, u_int8_t reg, u_int8_t val) +{ + u_int8_t tmp; + + i2c_write(chip, reg, 1, &tmp, 1); +} + +#endif /* CONFIG_DRIVER_DAVINCI_I2C */ diff --git a/cpu/arm926ejs/davinci/lowlevel_init.S b/cpu/arm926ejs/davinci/lowlevel_init.S new file mode 100644 index 00000000000..bbc48ec4725 --- /dev/null +++ b/cpu/arm926ejs/davinci/lowlevel_init.S @@ -0,0 +1,707 @@ +/* + * Low-level board setup code for TI DaVinci SoC based boards. + * + * Copyright (C) 2007 Sergey Kubushyn + * + * Partially based on TI sources, original copyrights follow: + */ + +/* + * Board specific setup info + * + * (C) Copyright 2003 + * Texas Instruments, + * Kshitij Gupta + * + * Modified for OMAP 1610 H2 board by Nishant Kamat, Jan 2004 + * + * Modified for OMAP 5912 OSK board by Rishi Bhattacharya, Apr 2004 + * See file CREDITS for list of people who contributed to this + * project. + * + * Modified for DV-EVM board by Rishi Bhattacharya, Apr 2005 + * See file CREDITS for list of people who contributed to this + * project. + * + * Modified for DV-EVM board by Swaminathan S, Nov 2005 + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +.globl lowlevel_init +lowlevel_init: + + /*-------------------------------------------------------* + * Mask all IRQs by setting all bits in the EINT default * + *-------------------------------------------------------*/ + mov r1, $0 + ldr r0, =EINT_ENABLE0 + str r1, [r0] + ldr r0, =EINT_ENABLE1 + str r1, [r0] + + /*------------------------------------------------------* + * Put the GEM in reset * + *------------------------------------------------------*/ + + /* Put the GEM in reset */ + ldr r8, PSC_GEM_FLAG_CLEAR + ldr r6, MDCTL_GEM + ldr r7, [r6] + and r7, r7, r8 + str r7, [r6] + + /* Enable the Power Domain Transition Command */ + ldr r6, PTCMD + ldr r7, [r6] + orr r7, r7, $0x02 + str r7, [r6] + + /* Check for Transition Complete(PTSTAT) */ +checkStatClkStopGem: + ldr r6, PTSTAT + ldr r7, [r6] + ands r7, r7, $0x02 + bne checkStatClkStopGem + + /* Check for GEM Reset Completion */ +checkGemStatClkStop: + ldr r6, MDSTAT_GEM + ldr r7, [r6] + ands r7, r7, $0x100 + bne checkGemStatClkStop + + /* Do this for enabling a WDT initiated reset this is a workaround + for a chip bug. Not required under normal situations */ + ldr r6, P1394 + mov r10, $0 + str r10, [r6] + + /*------------------------------------------------------* + * Enable L1 & L2 Memories in Fast mode * + *------------------------------------------------------*/ + ldr r6, DFT_ENABLE + mov r10, $0x01 + str r10, [r6] + + ldr r6, MMARG_BRF0 + ldr r10, MMARG_BRF0_VAL + str r10, [r6] + + ldr r6, DFT_ENABLE + mov r10, $0 + str r10, [r6] + + /*------------------------------------------------------* + * DDR2 PLL Initialization * + *------------------------------------------------------*/ + + /* Select the Clock Mode Depending on the Value written in the Boot Table by the run script */ + mov r10, $0 + ldr r6, PLL2_CTL + ldr r7, PLL_CLKSRC_MASK + ldr r8, [r6] + and r8, r8, r7 + mov r9, r10, lsl $8 + orr r8, r8, r9 + str r8, [r6] + + /* Select the PLLEN source */ + ldr r7, PLL_ENSRC_MASK + and r8, r8, r7 + str r8, [r6] + + /* Bypass the PLL */ + ldr r7, PLL_BYPASS_MASK + and r8, r8, r7 + str r8, [r6] + + /* Wait for few cycles to allow PLLEN Mux switch properly to bypass Clock */ + mov r10, $0x20 +WaitPPL2Loop: + subs r10, r10, $1 + bne WaitPPL2Loop + + /* Reset the PLL */ + ldr r7, PLL_RESET_MASK + and r8, r8, r7 + str r8, [r6] + + /* Power up the PLL */ + ldr r7, PLL_PWRUP_MASK + and r8, r8, r7 + str r8, [r6] + + /* Enable the PLL from Disable Mode */ + ldr r7, PLL_DISABLE_ENABLE_MASK + and r8, r8, r7 + str r8, [r6] + + /* Program the PLL Multiplier */ + ldr r6, PLL2_PLLM + mov r2, $0x17 /* 162 MHz */ + str r2, [r6] + + /* Program the PLL2 Divisor Value */ + ldr r6, PLL2_DIV2 + mov r3, $0x01 + str r3, [r6] + + /* Program the PLL2 Divisor Value */ + ldr r6, PLL2_DIV1 + mov r4, $0x0b /* 54 MHz */ + str r4, [r6] + + /* PLL2 DIV2 MMR */ + ldr r8, PLL2_DIV_MASK + ldr r6, PLL2_DIV2 + ldr r9, [r6] + and r8, r8, r9 + mov r9, $0x01 + mov r9, r9, lsl $15 + orr r8, r8, r9 + str r8, [r6] + + /* Program the GOSET bit to take new divider values */ + ldr r6, PLL2_PLLCMD + ldr r7, [r6] + orr r7, r7, $0x01 + str r7, [r6] + + /* Wait for Done */ + ldr r6, PLL2_PLLSTAT +doneLoop_0: + ldr r7, [r6] + ands r7, r7, $0x01 + bne doneLoop_0 + + /* PLL2 DIV1 MMR */ + ldr r8, PLL2_DIV_MASK + ldr r6, PLL2_DIV1 + ldr r9, [r6] + and r8, r8, r9 + mov r9, $0x01 + mov r9, r9, lsl $15 + orr r8, r8, r9 + str r8, [r6] + + /* Program the GOSET bit to take new divider values */ + ldr r6, PLL2_PLLCMD + ldr r7, [r6] + orr r7, r7, $0x01 + str r7, [r6] + + /* Wait for Done */ + ldr r6, PLL2_PLLSTAT +doneLoop: + ldr r7, [r6] + ands r7, r7, $0x01 + bne doneLoop + + /* Wait for PLL to Reset Properly */ + mov r10, $0x218 +ResetPPL2Loop: + subs r10, r10, $1 + bne ResetPPL2Loop + + /* Bring PLL out of Reset */ + ldr r6, PLL2_CTL + ldr r8, [r6] + orr r8, r8, $0x08 + str r8, [r6] + + /* Wait for PLL to Lock */ + ldr r10, PLL_LOCK_COUNT +PLL2Lock: + subs r10, r10, $1 + bne PLL2Lock + + /* Enable the PLL */ + ldr r6, PLL2_CTL + ldr r8, [r6] + orr r8, r8, $0x01 + str r8, [r6] + + /*------------------------------------------------------* + * Issue Soft Reset to DDR Module * + *------------------------------------------------------*/ + + /* Shut down the DDR2 LPSC Module */ + ldr r8, PSC_FLAG_CLEAR + ldr r6, MDCTL_DDR2 + ldr r7, [r6] + and r7, r7, r8 + orr r7, r7, $0x03 + str r7, [r6] + + /* Enable the Power Domain Transition Command */ + ldr r6, PTCMD + ldr r7, [r6] + orr r7, r7, $0x01 + str r7, [r6] + + /* Check for Transition Complete(PTSTAT) */ +checkStatClkStop: + ldr r6, PTSTAT + ldr r7, [r6] + ands r7, r7, $0x01 + bne checkStatClkStop + + /* Check for DDR2 Controller Enable Completion */ +checkDDRStatClkStop: + ldr r6, MDSTAT_DDR2 + ldr r7, [r6] + and r7, r7, $0x1f + cmp r7, $0x03 + bne checkDDRStatClkStop + + /*------------------------------------------------------* + * Program DDR2 MMRs for 162MHz Setting * + *------------------------------------------------------*/ + + /* Program PHY Control Register */ + ldr r6, DDRCTL + ldr r7, DDRCTL_VAL + str r7, [r6] + + /* Program SDRAM Bank Config Register */ + ldr r6, SDCFG + ldr r7, SDCFG_VAL + str r7, [r6] + + /* Program SDRAM TIM-0 Config Register */ + ldr r6, SDTIM0 + ldr r7, SDTIM0_VAL_162MHz + str r7, [r6] + + /* Program SDRAM TIM-1 Config Register */ + ldr r6, SDTIM1 + ldr r7, SDTIM1_VAL_162MHz + str r7, [r6] + + /* Program the SDRAM Bank Config Control Register */ + ldr r10, MASK_VAL + ldr r8, SDCFG + ldr r9, SDCFG_VAL + and r9, r9, r10 + str r9, [r8] + + /* Program SDRAM SDREF Config Register */ + ldr r6, SDREF + ldr r7, SDREF_VAL + str r7, [r6] + + /*------------------------------------------------------* + * Issue Soft Reset to DDR Module * + *------------------------------------------------------*/ + + /* Issue a Dummy DDR2 read/write */ + ldr r8, DDR2_START_ADDR + ldr r7, DUMMY_VAL + str r7, [r8] + ldr r7, [r8] + + /* Shut down the DDR2 LPSC Module */ + ldr r8, PSC_FLAG_CLEAR + ldr r6, MDCTL_DDR2 + ldr r7, [r6] + and r7, r7, r8 + orr r7, r7, $0x01 + str r7, [r6] + + /* Enable the Power Domain Transition Command */ + ldr r6, PTCMD + ldr r7, [r6] + orr r7, r7, $0x01 + str r7, [r6] + + /* Check for Transition Complete(PTSTAT) */ +checkStatClkStop2: + ldr r6, PTSTAT + ldr r7, [r6] + ands r7, r7, $0x01 + bne checkStatClkStop2 + + /* Check for DDR2 Controller Enable Completion */ +checkDDRStatClkStop2: + ldr r6, MDSTAT_DDR2 + ldr r7, [r6] + and r7, r7, $0x1f + cmp r7, $0x01 + bne checkDDRStatClkStop2 + + /*------------------------------------------------------* + * Turn DDR2 Controller Clocks On * + *------------------------------------------------------*/ + + /* Enable the DDR2 LPSC Module */ + ldr r6, MDCTL_DDR2 + ldr r7, [r6] + orr r7, r7, $0x03 + str r7, [r6] + + /* Enable the Power Domain Transition Command */ + ldr r6, PTCMD + ldr r7, [r6] + orr r7, r7, $0x01 + str r7, [r6] + + /* Check for Transition Complete(PTSTAT) */ +checkStatClkEn2: + ldr r6, PTSTAT + ldr r7, [r6] + ands r7, r7, $0x01 + bne checkStatClkEn2 + + /* Check for DDR2 Controller Enable Completion */ +checkDDRStatClkEn2: + ldr r6, MDSTAT_DDR2 + ldr r7, [r6] + and r7, r7, $0x1f + cmp r7, $0x03 + bne checkDDRStatClkEn2 + + /* DDR Writes and Reads */ + ldr r6, CFGTEST + mov r3, $0x01 + str r3, [r6] + + /*------------------------------------------------------* + * System PLL Initialization * + *------------------------------------------------------*/ + + /* Select the Clock Mode Depending on the Value written in the Boot Table by the run script */ + mov r2, $0 + ldr r6, PLL1_CTL + ldr r7, PLL_CLKSRC_MASK + ldr r8, [r6] + and r8, r8, r7 + mov r9, r2, lsl $8 + orr r8, r8, r9 + str r8, [r6] + + /* Select the PLLEN source */ + ldr r7, PLL_ENSRC_MASK + and r8, r8, r7 + str r8, [r6] + + /* Bypass the PLL */ + ldr r7, PLL_BYPASS_MASK + and r8, r8, r7 + str r8, [r6] + + /* Wait for few cycles to allow PLLEN Mux switch properly to bypass Clock */ + mov r10, $0x20 + +WaitLoop: + subs r10, r10, $1 + bne WaitLoop + + /* Reset the PLL */ + ldr r7, PLL_RESET_MASK + and r8, r8, r7 + str r8, [r6] + + /* Disable the PLL */ + orr r8, r8, $0x10 + str r8, [r6] + + /* Power up the PLL */ + ldr r7, PLL_PWRUP_MASK + and r8, r8, r7 + str r8, [r6] + + /* Enable the PLL from Disable Mode */ + ldr r7, PLL_DISABLE_ENABLE_MASK + and r8, r8, r7 + str r8, [r6] + + /* Program the PLL Multiplier */ + ldr r6, PLL1_PLLM + mov r3, $0x15 /* For 594MHz */ + str r3, [r6] + + /* Wait for PLL to Reset Properly */ + mov r10, $0xff + +ResetLoop: + subs r10, r10, $1 + bne ResetLoop + + /* Bring PLL out of Reset */ + ldr r6, PLL1_CTL + orr r8, r8, $0x08 + str r8, [r6] + + /* Wait for PLL to Lock */ + ldr r10, PLL_LOCK_COUNT + +PLL1Lock: + subs r10, r10, $1 + bne PLL1Lock + + /* Enable the PLL */ + orr r8, r8, $0x01 + str r8, [r6] + + nop + nop + nop + nop + + /*------------------------------------------------------* + * AEMIF configuration for NOR Flash (double check) * + *------------------------------------------------------*/ + ldr r0, _PINMUX0 + ldr r1, _DEV_SETTING + str r1, [r0] + + ldr r0, WAITCFG + ldr r1, WAITCFG_VAL + ldr r2, [r0] + orr r2, r2, r1 + str r2, [r0] + + ldr r0, ACFG3 + ldr r1, ACFG3_VAL + ldr r2, [r0] + and r1, r2, r1 + str r1, [r0] + + ldr r0, ACFG4 + ldr r1, ACFG4_VAL + ldr r2, [r0] + and r1, r2, r1 + str r1, [r0] + + ldr r0, ACFG5 + ldr r1, ACFG5_VAL + ldr r2, [r0] + and r1, r2, r1 + str r1, [r0] + + /*--------------------------------------* + * VTP manual Calibration * + *--------------------------------------*/ + ldr r0, VTPIOCR + ldr r1, VTP_MMR0 + str r1, [r0] + + ldr r0, VTPIOCR + ldr r1, VTP_MMR1 + str r1, [r0] + + /* Wait for 33 VTP CLK cycles. VRP operates at 27 MHz */ + ldr r10, VTP_LOCK_COUNT +VTPLock: + subs r10, r10, $1 + bne VTPLock + + ldr r6, DFT_ENABLE + mov r10, $0x01 + str r10, [r6] + + ldr r6, DDRVTPR + ldr r7, [r6] + and r7, r7, $0x1f + and r8, r7, $0x3e0 + orr r8, r7, r8 + ldr r7, VTP_RECAL + orr r8, r7, r8 + ldr r7, VTP_EN + orr r8, r7, r8 + str r8, [r0] + + + /* Wait for 33 VTP CLK cycles. VRP operates at 27 MHz */ + ldr r10, VTP_LOCK_COUNT +VTP1Lock: + subs r10, r10, $1 + bne VTP1Lock + + ldr r1, [r0] + ldr r2, VTP_MASK + and r2, r1, r2 + str r2, [r0] + + ldr r6, DFT_ENABLE + mov r10, $0 + str r10, [r6] + + /* + * Call board-specific lowlevel init. + * That MUST be present and THAT returns + * back to arch calling code with "mov pc, lr." + */ + b dv_board_init + +.ltorg + +_PINMUX0: + .word 0x01c40000 /* Device Configuration Registers */ +_PINMUX1: + .word 0x01c40004 /* Device Configuration Registers */ + +_DEV_SETTING: + .word 0x00000c1f + +WAITCFG: + .word 0x01e00004 +WAITCFG_VAL: + .word 0 +ACFG3: + .word 0x01e00014 +ACFG3_VAL: + .word 0x3ffffffd +ACFG4: + .word 0x01e00018 +ACFG4_VAL: + .word 0x3ffffffd +ACFG5: + .word 0x01e0001c +ACFG5_VAL: + .word 0x3ffffffd + +MDCTL_DDR2: + .word 0x01c41a34 +MDSTAT_DDR2: + .word 0x01c41834 + +PTCMD: + .word 0x01c41120 +PTSTAT: + .word 0x01c41128 + +EINT_ENABLE0: + .word 0x01c48018 +EINT_ENABLE1: + .word 0x01c4801c + +PSC_FLAG_CLEAR: + .word 0xffffffe0 +PSC_GEM_FLAG_CLEAR: + .word 0xfffffeff + +/* DDR2 MMR & CONFIGURATION VALUES, 162 MHZ clock */ +DDRCTL: + .word 0x200000e4 +DDRCTL_VAL: + .word 0x50006405 +SDREF: + .word 0x2000000c +SDREF_VAL: + .word 0x000005c3 +SDCFG: + .word 0x20000008 +SDCFG_VAL: +#ifdef DDR_4BANKS + .word 0x00178622 +#elif defined DDR_8BANKS + .word 0x00178632 +#else +#error "Unknown DDR configuration!!!" +#endif +SDTIM0: + .word 0x20000010 +SDTIM0_VAL_162MHz: + .word 0x28923211 +SDTIM1: + .word 0x20000014 +SDTIM1_VAL_162MHz: + .word 0x0016c722 +VTPIOCR: + .word 0x200000f0 /* VTP IO Control register */ +DDRVTPR: + .word 0x01c42030 /* DDR VPTR MMR */ +VTP_MMR0: + .word 0x201f +VTP_MMR1: + .word 0xa01f +DFT_ENABLE: + .word 0x01c4004c +VTP_LOCK_COUNT: + .word 0x5b0 +VTP_MASK: + .word 0xffffdfff +VTP_RECAL: + .word 0x40000 +VTP_EN: + .word 0x02000 +CFGTEST: + .word 0x80010000 +MASK_VAL: + .word 0x00000fff + +/* GEM Power Up & LPSC Control Register */ +MDCTL_GEM: + .word 0x01c41a9c +MDSTAT_GEM: + .word 0x01c4189c + +/* For WDT reset chip bug */ +P1394: + .word 0x01c41a20 + +PLL_CLKSRC_MASK: + .word 0xfffffeff /* Mask the Clock Mode bit */ +PLL_ENSRC_MASK: + .word 0xffffffdf /* Select the PLLEN source */ +PLL_BYPASS_MASK: + .word 0xfffffffe /* Put the PLL in BYPASS */ +PLL_RESET_MASK: + .word 0xfffffff7 /* Put the PLL in Reset Mode */ +PLL_PWRUP_MASK: + .word 0xfffffffd /* PLL Power up Mask Bit */ +PLL_DISABLE_ENABLE_MASK: + .word 0xffffffef /* Enable the PLL from Disable */ +PLL_LOCK_COUNT: + .word 0x2000 + +/* PLL1-SYSTEM PLL MMRs */ +PLL1_CTL: + .word 0x01c40900 +PLL1_PLLM: + .word 0x01c40910 + +/* PLL2-SYSTEM PLL MMRs */ +PLL2_CTL: + .word 0x01c40d00 +PLL2_PLLM: + .word 0x01c40d10 +PLL2_DIV1: + .word 0x01c40d18 +PLL2_DIV2: + .word 0x01c40d1c +PLL2_PLLCMD: + .word 0x01c40d38 +PLL2_PLLSTAT: + .word 0x01c40d3c +PLL2_DIV_MASK: + .word 0xffff7fff + +MMARG_BRF0: + .word 0x01c42010 /* BRF margin mode 0 (R/W)*/ +MMARG_BRF0_VAL: + .word 0x00444400 + +DDR2_START_ADDR: + .word 0x80000000 +DUMMY_VAL: + .word 0xa55aa55a diff --git a/cpu/arm926ejs/davinci/lxt972.c b/cpu/arm926ejs/davinci/lxt972.c new file mode 100644 index 00000000000..6eeb6e5ee92 --- /dev/null +++ b/cpu/arm926ejs/davinci/lxt972.c @@ -0,0 +1,142 @@ +/* + * Intel LXT971/LXT972 PHY Driver for TI DaVinci + * (TMS320DM644x) based boards. + * + * Copyright (C) 2007 Sergey Kubushyn + * + * -------------------------------------------------------- + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include + +#ifdef CONFIG_DRIVER_TI_EMAC + +#ifdef CONFIG_CMD_NET + +int lxt972_is_phy_connected(int phy_addr) +{ + u_int16_t id1, id2; + + if (!dm644x_eth_phy_read(phy_addr, PHY_COMMON_ID1, &id1)) + return(0); + if (!dm644x_eth_phy_read(phy_addr, PHY_COMMON_ID2, &id2)) + return(0); + + if ((id1 == (0x0013)) && ((id2 & 0xfff0) == 0x78e0)) + return(1); + + return(0); +} + +int lxt972_get_link_speed(int phy_addr) +{ + u_int16_t stat1, tmp; + volatile emac_regs* emac = (emac_regs *)EMAC_BASE_ADDR; + + if (!dm644x_eth_phy_read(phy_addr, PHY_LXT971_STAT2, &stat1)) + return(0); + + if (!(stat1 & PHY_LXT971_STAT2_LINK)) /* link up? */ + return(0); + + if (!dm644x_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp)) + return(0); + + tmp |= PHY_LXT971_DIG_CFG_MII_DRIVE; + + dm644x_eth_phy_write(phy_addr, PHY_LXT971_DIG_CFG, tmp); + /* Read back */ + if (!dm644x_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp)) + return(0); + + + /* Speed doesn't matter, there is no setting for it in EMAC... */ + if (stat1 & PHY_LXT971_STAT2_100BTX) { + if (stat1 & PHY_LXT971_STAT2_DUPLEX_MODE) { + /* set DM644x EMAC for Full Duplex */ + emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE | EMAC_MACCONTROL_FULLDUPLEX_ENABLE; + } else { + /*set DM644x EMAC for Half Duplex */ + emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE; + } + + return(1); + } else { + if (stat1 & PHY_LXT971_STAT2_DUPLEX_MODE) { + /* set DM644x EMAC for Full Duplex */ + emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE | EMAC_MACCONTROL_FULLDUPLEX_ENABLE; + } else { + /*set DM644x EMAC for Half Duplex */ + emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE; + } + + return(1); + } + + return(0); +} + + +int lxt972_init_phy(int phy_addr) +{ + int ret = 1; + + if (!lxt972_get_link_speed(phy_addr)) { + /* Try another time */ + ret = lxt972_get_link_speed(phy_addr); + } + + /* Disable PHY Interrupts */ + dm644x_eth_phy_write(phy_addr, PHY_LXT971_INT_ENABLE, 0); + + return(ret); +} + + +int lxt972_auto_negotiate(int phy_addr) +{ + u_int16_t tmp; + + + if (!dm644x_eth_phy_read(phy_addr, PHY_COMMON_CTRL, &tmp)) + return(0); + + /* Restart Auto_negotiation */ + tmp |= PHY_COMMON_CTRL_RES_AUTO; + dm644x_eth_phy_write(phy_addr, PHY_COMMON_CTRL, tmp); + + /*check AutoNegotiate complete */ + udelay (10000); + if (!dm644x_eth_phy_read(phy_addr, PHY_COMMON_STAT, &tmp)) + return(0); + + if (!(tmp & PHY_COMMON_STAT_AN_COMP)) + return(0); + + return (lxt972_get_link_speed(phy_addr)); +} + +#endif /* CONFIG_CMD_NET */ + +#endif /* CONFIG_DRIVER_ETHER */ diff --git a/cpu/arm926ejs/davinci/nand.c b/cpu/arm926ejs/davinci/nand.c new file mode 100644 index 00000000000..127be9fcd43 --- /dev/null +++ b/cpu/arm926ejs/davinci/nand.c @@ -0,0 +1,389 @@ +/* + * NAND driver for TI DaVinci based boards. + * + * Copyright (C) 2007 Sergey Kubushyn + * + * Based on Linux DaVinci NAND driver by TI. Original copyright follows: + */ + +/* + * + * linux/drivers/mtd/nand/nand_davinci.c + * + * NAND Flash Driver + * + * Copyright (C) 2006 Texas Instruments. + * + * ---------------------------------------------------------------------------- + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * ---------------------------------------------------------------------------- + * + * Overview: + * This is a device driver for the NAND flash device found on the + * DaVinci board which utilizes the Samsung k9k2g08 part. + * + Modifications: + ver. 1.0: Feb 2005, Vinod/Sudhakar + - + * + */ + +#include + +#ifdef CFG_USE_NAND +#if !defined(CFG_NAND_LEGACY) + +#include +#include +#include + +extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; + +static void nand_davinci_hwcontrol(struct mtd_info *mtd, int cmd) +{ + struct nand_chip *this = mtd->priv; + u_int32_t IO_ADDR_W = (u_int32_t)this->IO_ADDR_W; + + IO_ADDR_W &= ~(MASK_ALE|MASK_CLE); + + switch (cmd) { + case NAND_CTL_SETCLE: + IO_ADDR_W |= MASK_CLE; + break; + case NAND_CTL_SETALE: + IO_ADDR_W |= MASK_ALE; + break; + } + + this->IO_ADDR_W = (void *)IO_ADDR_W; +} + +/* Set WP on deselect, write enable on select */ +static void nand_davinci_select_chip(struct mtd_info *mtd, int chip) +{ +#define GPIO_SET_DATA01 0x01c67018 +#define GPIO_CLR_DATA01 0x01c6701c +#define GPIO_NAND_WP (1 << 4) +#ifdef SONATA_BOARD_GPIOWP + if (chip < 0) { + REG(GPIO_CLR_DATA01) |= GPIO_NAND_WP; + } else { + REG(GPIO_SET_DATA01) |= GPIO_NAND_WP; + } +#endif +} + +#ifdef CFG_NAND_HW_ECC +#ifdef CFG_NAND_LARGEPAGE +static struct nand_oobinfo davinci_nand_oobinfo = { + .useecc = MTD_NANDECC_AUTOPLACE, + .eccbytes = 12, + .eccpos = {8, 9, 10, 24, 25, 26, 40, 41, 42, 56, 57, 58}, + .oobfree = { {2, 6}, {12, 12}, {28, 12}, {44, 12}, {60, 4} } +}; +#elif defined(CFG_NAND_SMALLPAGE) +static struct nand_oobinfo davinci_nand_oobinfo = { + .useecc = MTD_NANDECC_AUTOPLACE, + .eccbytes = 3, + .eccpos = {0, 1, 2}, + .oobfree = { {6, 2}, {8, 8} } +}; +#else +#error "Either CFG_NAND_LARGEPAGE or CFG_NAND_SMALLPAGE must be defined!" +#endif + +static void nand_davinci_enable_hwecc(struct mtd_info *mtd, int mode) +{ + emifregs emif_addr; + int dummy; + + emif_addr = (emifregs)DAVINCI_ASYNC_EMIF_CNTRL_BASE; + + dummy = emif_addr->NANDF1ECC; + dummy = emif_addr->NANDF2ECC; + dummy = emif_addr->NANDF3ECC; + dummy = emif_addr->NANDF4ECC; + + emif_addr->NANDFCR |= (1 << 8); +} + +static u_int32_t nand_davinci_readecc(struct mtd_info *mtd, u_int32_t region) +{ + u_int32_t ecc = 0; + emifregs emif_base_addr; + + emif_base_addr = (emifregs)DAVINCI_ASYNC_EMIF_CNTRL_BASE; + + if (region == 1) + ecc = emif_base_addr->NANDF1ECC; + else if (region == 2) + ecc = emif_base_addr->NANDF2ECC; + else if (region == 3) + ecc = emif_base_addr->NANDF3ECC; + else if (region == 4) + ecc = emif_base_addr->NANDF4ECC; + + return(ecc); +} + +static int nand_davinci_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code) +{ + u_int32_t tmp; + int region, n; + struct nand_chip *this = mtd->priv; + + n = (this->eccmode == NAND_ECC_HW12_2048) ? 4 : 1; + + region = 1; + while (n--) { + tmp = nand_davinci_readecc(mtd, region); + *ecc_code++ = tmp; + *ecc_code++ = tmp >> 16; + *ecc_code++ = ((tmp >> 8) & 0x0f) | ((tmp >> 20) & 0xf0); + region++; + } + return(0); +} + +static void nand_davinci_gen_true_ecc(u_int8_t *ecc_buf) +{ + u_int32_t tmp = ecc_buf[0] | (ecc_buf[1] << 16) | ((ecc_buf[2] & 0xf0) << 20) | ((ecc_buf[2] & 0x0f) << 8); + + ecc_buf[0] = ~(P64o(tmp) | P64e(tmp) | P32o(tmp) | P32e(tmp) | P16o(tmp) | P16e(tmp) | P8o(tmp) | P8e(tmp)); + ecc_buf[1] = ~(P1024o(tmp) | P1024e(tmp) | P512o(tmp) | P512e(tmp) | P256o(tmp) | P256e(tmp) | P128o(tmp) | P128e(tmp)); + ecc_buf[2] = ~( P4o(tmp) | P4e(tmp) | P2o(tmp) | P2e(tmp) | P1o(tmp) | P1e(tmp) | P2048o(tmp) | P2048e(tmp)); +} + +static int nand_davinci_compare_ecc(u_int8_t *ecc_nand, u_int8_t *ecc_calc, u_int8_t *page_data) +{ + u_int32_t i; + u_int8_t tmp0_bit[8], tmp1_bit[8], tmp2_bit[8]; + u_int8_t comp0_bit[8], comp1_bit[8], comp2_bit[8]; + u_int8_t ecc_bit[24]; + u_int8_t ecc_sum = 0; + u_int8_t find_bit = 0; + u_int32_t find_byte = 0; + int is_ecc_ff; + + is_ecc_ff = ((*ecc_nand == 0xff) && (*(ecc_nand + 1) == 0xff) && (*(ecc_nand + 2) == 0xff)); + + nand_davinci_gen_true_ecc(ecc_nand); + nand_davinci_gen_true_ecc(ecc_calc); + + for (i = 0; i <= 2; i++) { + *(ecc_nand + i) = ~(*(ecc_nand + i)); + *(ecc_calc + i) = ~(*(ecc_calc + i)); + } + + for (i = 0; i < 8; i++) { + tmp0_bit[i] = *ecc_nand % 2; + *ecc_nand = *ecc_nand / 2; + } + + for (i = 0; i < 8; i++) { + tmp1_bit[i] = *(ecc_nand + 1) % 2; + *(ecc_nand + 1) = *(ecc_nand + 1) / 2; + } + + for (i = 0; i < 8; i++) { + tmp2_bit[i] = *(ecc_nand + 2) % 2; + *(ecc_nand + 2) = *(ecc_nand + 2) / 2; + } + + for (i = 0; i < 8; i++) { + comp0_bit[i] = *ecc_calc % 2; + *ecc_calc = *ecc_calc / 2; + } + + for (i = 0; i < 8; i++) { + comp1_bit[i] = *(ecc_calc + 1) % 2; + *(ecc_calc + 1) = *(ecc_calc + 1) / 2; + } + + for (i = 0; i < 8; i++) { + comp2_bit[i] = *(ecc_calc + 2) % 2; + *(ecc_calc + 2) = *(ecc_calc + 2) / 2; + } + + for (i = 0; i< 6; i++) + ecc_bit[i] = tmp2_bit[i + 2] ^ comp2_bit[i + 2]; + + for (i = 0; i < 8; i++) + ecc_bit[i + 6] = tmp0_bit[i] ^ comp0_bit[i]; + + for (i = 0; i < 8; i++) + ecc_bit[i + 14] = tmp1_bit[i] ^ comp1_bit[i]; + + ecc_bit[22] = tmp2_bit[0] ^ comp2_bit[0]; + ecc_bit[23] = tmp2_bit[1] ^ comp2_bit[1]; + + for (i = 0; i < 24; i++) + ecc_sum += ecc_bit[i]; + + switch (ecc_sum) { + case 0: + /* Not reached because this function is not called if + ECC values are equal */ + return 0; + case 1: + /* Uncorrectable error */ + DEBUG (MTD_DEBUG_LEVEL0, "ECC UNCORRECTED_ERROR 1\n"); + return(-1); + case 12: + /* Correctable error */ + find_byte = (ecc_bit[23] << 8) + + (ecc_bit[21] << 7) + + (ecc_bit[19] << 6) + + (ecc_bit[17] << 5) + + (ecc_bit[15] << 4) + + (ecc_bit[13] << 3) + + (ecc_bit[11] << 2) + + (ecc_bit[9] << 1) + + ecc_bit[7]; + + find_bit = (ecc_bit[5] << 2) + (ecc_bit[3] << 1) + ecc_bit[1]; + + DEBUG (MTD_DEBUG_LEVEL0, "Correcting single bit ECC error at offset: %d, bit: %d\n", find_byte, find_bit); + + page_data[find_byte] ^= (1 << find_bit); + + return(0); + default: + if (is_ecc_ff) { + if (ecc_calc[0] == 0 && ecc_calc[1] == 0 && ecc_calc[2] == 0) + return(0); + } + DEBUG (MTD_DEBUG_LEVEL0, "UNCORRECTED_ERROR default\n"); + return(-1); + } +} + +static int nand_davinci_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc) +{ + struct nand_chip *this; + int block_count = 0, i, rc; + + this = mtd->priv; + block_count = (this->eccmode == NAND_ECC_HW12_2048) ? 4 : 1; + for (i = 0; i < block_count; i++) { + if (memcmp(read_ecc, calc_ecc, 3) != 0) { + rc = nand_davinci_compare_ecc(read_ecc, calc_ecc, dat); + if (rc < 0) { + return(rc); + } + } + read_ecc += 3; + calc_ecc += 3; + dat += 512; + } + return(0); +} +#endif + +static int nand_davinci_dev_ready(struct mtd_info *mtd) +{ + emifregs emif_addr; + + emif_addr = (emifregs)DAVINCI_ASYNC_EMIF_CNTRL_BASE; + + return(emif_addr->NANDFSR & 0x1); +} + +static int nand_davinci_waitfunc(struct mtd_info *mtd, struct nand_chip *this, int state) +{ + while(!nand_davinci_dev_ready(mtd)) {;} + *NAND_CE0CLE = NAND_STATUS; + return(*NAND_CE0DATA); +} + +static void nand_flash_init(void) +{ + u_int32_t acfg1 = 0x3ffffffc; + u_int32_t acfg2 = 0x3ffffffc; + u_int32_t acfg3 = 0x3ffffffc; + u_int32_t acfg4 = 0x3ffffffc; + emifregs emif_regs; + + /*------------------------------------------------------------------* + * NAND FLASH CHIP TIMEOUT @ 459 MHz * + * * + * AEMIF.CLK freq = PLL1/6 = 459/6 = 76.5 MHz * + * AEMIF.CLK period = 1/76.5 MHz = 13.1 ns * + * * + *------------------------------------------------------------------*/ + acfg1 = 0 + | (0 << 31 ) /* selectStrobe */ + | (0 << 30 ) /* extWait */ + | (1 << 26 ) /* writeSetup 10 ns */ + | (3 << 20 ) /* writeStrobe 40 ns */ + | (1 << 17 ) /* writeHold 10 ns */ + | (1 << 13 ) /* readSetup 10 ns */ + | (5 << 7 ) /* readStrobe 60 ns */ + | (1 << 4 ) /* readHold 10 ns */ + | (3 << 2 ) /* turnAround ?? ns */ + | (0 << 0 ) /* asyncSize 8-bit bus */ + ; + + emif_regs = (emifregs)DAVINCI_ASYNC_EMIF_CNTRL_BASE; + + emif_regs->AWCCR |= 0x10000000; + emif_regs->AB1CR = acfg1; /* 0x08244128 */; + emif_regs->AB2CR = acfg2; + emif_regs->AB3CR = acfg3; + emif_regs->AB4CR = acfg4; + emif_regs->NANDFCR = 0x00000101; +} + +int board_nand_init(struct nand_chip *nand) +{ + nand->IO_ADDR_R = (void __iomem *)NAND_CE0DATA; + nand->IO_ADDR_W = (void __iomem *)NAND_CE0DATA; + nand->chip_delay = 0; + nand->select_chip = nand_davinci_select_chip; +#ifdef CFG_NAND_USE_FLASH_BBT + nand->options = NAND_USE_FLASH_BBT; +#endif +#ifdef CFG_NAND_HW_ECC +#ifdef CFG_NAND_LARGEPAGE + nand->eccmode = NAND_ECC_HW12_2048; +#elif defined(CFG_NAND_SMALLPAGE) + nand->eccmode = NAND_ECC_HW3_512; +#else +#error "Either CFG_NAND_LARGEPAGE or CFG_NAND_SMALLPAGE must be defined!" +#endif + nand->autooob = &davinci_nand_oobinfo; + nand->calculate_ecc = nand_davinci_calculate_ecc; + nand->correct_data = nand_davinci_correct_data; + nand->enable_hwecc = nand_davinci_enable_hwecc; +#else + nand->eccmode = NAND_ECC_SOFT; +#endif + + /* Set address of hardware control function */ + nand->hwcontrol = nand_davinci_hwcontrol; + + nand->dev_ready = nand_davinci_dev_ready; + nand->waitfunc = nand_davinci_waitfunc; + + nand_flash_init(); + + return(0); +} + +#else +#error "U-Boot legacy NAND support not available for DaVinci chips" +#endif +#endif /* CFG_USE_NAND */ diff --git a/cpu/arm926ejs/davinci/reset.S b/cpu/arm926ejs/davinci/reset.S new file mode 100644 index 00000000000..a687d44035c --- /dev/null +++ b/cpu/arm926ejs/davinci/reset.S @@ -0,0 +1,77 @@ +/* + * Processor reset using WDT for TI TMS320DM644x SoC. + * + * Copyright (C) 2007 Sergey Kubushyn + * + * ----------------------------------------------------- + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +.globl reset_cpu +reset_cpu: + ldr r0, WDT_TGCR + mov r1, $0x08 + str r1, [r0] + ldr r1, [r0] + orr r1, r1, $0x03 + str r1, [r0] + mov r1, $0 + ldr r0, WDT_TIM12 + str r1, [r0] + ldr r0, WDT_TIM34 + str r1, [r0] + ldr r0, WDT_PRD12 + str r1, [r0] + ldr r0, WDT_PRD34 + str r1, [r0] + ldr r0, WDT_TCR + ldr r1, [r0] + orr r1, r1, $0x40 + str r1, [r0] + ldr r0, WDT_WDTCR + ldr r1, [r0] + orr r1, r1, $0x4000 + str r1, [r0] + ldr r1, WDTCR_VAL1 + str r1, [r0] + ldr r1, WDTCR_VAL2 + str r1, [r0] + nop + nop + nop + nop +reset_cpu_loop: + b reset_cpu_loop + +WDT_TGCR: + .word 0x01c21c24 +WDT_TIM12: + .word 0x01c21c10 +WDT_TIM34: + .word 0x01c21c14 +WDT_PRD12: + .word 0x01c21c18 +WDT_PRD34: + .word 0x01c21c1c +WDT_TCR: + .word 0x01c21c20 +WDT_WDTCR: + .word 0x01c21c28 +WDTCR_VAL1: + .word 0xa5c64000 +WDTCR_VAL2: + .word 0xda7e4000 diff --git a/cpu/arm926ejs/davinci/timer.c b/cpu/arm926ejs/davinci/timer.c new file mode 100644 index 00000000000..c6b1dda51fc --- /dev/null +++ b/cpu/arm926ejs/davinci/timer.c @@ -0,0 +1,165 @@ +/* + * (C) Copyright 2003 + * Texas Instruments + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH + * Marius Groeger + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH + * Alex Zuepke + * + * (C) Copyright 2002-2004 + * Gary Jennejohn, DENX Software Engineering, + * + * (C) Copyright 2004 + * Philippe Robin, ARM Ltd. + * + * Copyright (C) 2007 Sergey Kubushyn + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +typedef volatile struct { + u_int32_t pid12; + u_int32_t emumgt_clksped; + u_int32_t gpint_en; + u_int32_t gpdir_dat; + u_int32_t tim12; + u_int32_t tim34; + u_int32_t prd12; + u_int32_t prd34; + u_int32_t tcr; + u_int32_t tgcr; + u_int32_t wdtcr; + u_int32_t tlgc; + u_int32_t tlmr; +} davinci_timer; + +davinci_timer *timer = (davinci_timer *)CFG_TIMERBASE; + +#define TIMER_LOAD_VAL (CFG_HZ_CLOCK / CFG_HZ) +#define READ_TIMER timer->tim34 + +static ulong timestamp; +static ulong lastinc; + +int timer_init(void) +{ + /* We are using timer34 in unchained 32-bit mode, full speed */ + timer->tcr = 0x0; + timer->tgcr = 0x0; + timer->tgcr = 0x06; + timer->tim34 = 0x0; + timer->prd34 = TIMER_LOAD_VAL; + lastinc = 0; + timer->tcr = 0x80 << 16; + timestamp = 0; + + return(0); +} + +void reset_timer(void) +{ + reset_timer_masked(); +} + +ulong get_timer(ulong base) +{ + return(get_timer_masked() - base); +} + +void set_timer(ulong t) +{ + timestamp = t; +} + +void udelay(unsigned long usec) +{ + udelay_masked(usec); +} + +void reset_timer_masked(void) +{ + lastinc = READ_TIMER; + timestamp = 0; +} + +ulong get_timer_raw(void) +{ + ulong now = READ_TIMER; + + if (now >= lastinc) { + /* normal mode */ + timestamp += now - lastinc; + } else { + /* overflow ... */ + timestamp += now + TIMER_LOAD_VAL - lastinc; + } + lastinc = now; + return timestamp; +} + +ulong get_timer_masked(void) +{ + return(get_timer_raw() / TIMER_LOAD_VAL); +} + +void udelay_masked(unsigned long usec) +{ + ulong tmo; + ulong endtime; + signed long diff; + + tmo = CFG_HZ_CLOCK / 1000; + tmo *= usec; + tmo /= 1000; + + endtime = get_timer_raw() + tmo; + + do { + ulong now = get_timer_raw(); + diff = endtime - now; + } while (diff >= 0); +} + +/* + * This function is derived from PowerPC code (read timebase as long long). + * On ARM it just returns the timer value. + */ +unsigned long long get_ticks(void) +{ + return(get_timer(0)); +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On ARM it returns the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + ulong tbclk; + + tbclk = CFG_HZ; + return(tbclk); +} diff --git a/include/_exports.h b/include/_exports.h index da6e088163e..af43885c527 100644 --- a/include/_exports.h +++ b/include/_exports.h @@ -14,6 +14,9 @@ EXPORT_FUNC(vprintf) EXPORT_FUNC(do_reset) EXPORT_FUNC(getenv) EXPORT_FUNC(setenv) +#ifdef CONFIG_HAS_UID +EXPORT_FUNC(forceenv) +#endif EXPORT_FUNC(simple_strtoul) EXPORT_FUNC(simple_strtol) EXPORT_FUNC(strcmp) diff --git a/include/asm-arm/arch-davinci/emac_defs.h b/include/asm-arm/arch-davinci/emac_defs.h new file mode 100644 index 00000000000..0e10116d870 --- /dev/null +++ b/include/asm-arm/arch-davinci/emac_defs.h @@ -0,0 +1,311 @@ +/* + * Copyright (C) 2007 Sergey Kubushyn + * + * Based on: + * + * ---------------------------------------------------------------------------- + * + * dm644x_emac.h + * + * TI DaVinci (DM644X) EMAC peripheral driver header for DV-EVM + * + * Copyright (C) 2005 Texas Instruments. + * + * ---------------------------------------------------------------------------- + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * ---------------------------------------------------------------------------- + + * Modifications: + * ver. 1.0: Sep 2005, TI PSP Team - Created EMAC version for uBoot. + * + */ + +#ifndef _DM644X_EMAC_H_ +#define _DM644X_EMAC_H_ + +#include + +#define EMAC_BASE_ADDR (0x01c80000) +#define EMAC_WRAPPER_BASE_ADDR (0x01c81000) +#define EMAC_WRAPPER_RAM_ADDR (0x01c82000) +#define EMAC_MDIO_BASE_ADDR (0x01c84000) + +/* MDIO module input frequency */ +#define EMAC_MDIO_BUS_FREQ 99000000 /* PLL/6 - 99 MHz */ +/* MDIO clock output frequency */ +#define EMAC_MDIO_CLOCK_FREQ 2000000 /* 2.0 MHz */ + +/* Ethernet Min/Max packet size */ +#define EMAC_MIN_ETHERNET_PKT_SIZE 60 +#define EMAC_MAX_ETHERNET_PKT_SIZE 1518 +#define EMAC_PKT_ALIGN 18 /* 1518 + 18 = 1536 (packet aligned on 32 byte boundry) */ + +/* Number of RX packet buffers + * NOTE: Only 1 buffer supported as of now + */ +#define EMAC_MAX_RX_BUFFERS 10 + + +/*********************************************** + ******** Internally used macros *************** + ***********************************************/ + +#define EMAC_CH_TX 1 +#define EMAC_CH_RX 0 + +/* Each descriptor occupies 4 words, lets start RX desc's at 0 and + * reserve space for 64 descriptors max + */ +#define EMAC_RX_DESC_BASE 0x0 +#define EMAC_TX_DESC_BASE 0x1000 + +/* EMAC Teardown value */ +#define EMAC_TEARDOWN_VALUE 0xfffffffc + +/* MII Status Register */ +#define MII_STATUS_REG 1 + +/* Number of statistics registers */ +#define EMAC_NUM_STATS 36 + + +/* EMAC Descriptor */ +typedef volatile struct _emac_desc +{ + u_int32_t next; /* Pointer to next descriptor in chain */ + u_int8_t *buffer; /* Pointer to data buffer */ + u_int32_t buff_off_len; /* Buffer Offset(MSW) and Length(LSW) */ + u_int32_t pkt_flag_len; /* Packet Flags(MSW) and Length(LSW) */ +} emac_desc; + +/* CPPI bit positions */ +#define EMAC_CPPI_SOP_BIT (0x80000000) +#define EMAC_CPPI_EOP_BIT (0x40000000) +#define EMAC_CPPI_OWNERSHIP_BIT (0x20000000) +#define EMAC_CPPI_EOQ_BIT (0x10000000) +#define EMAC_CPPI_TEARDOWN_COMPLETE_BIT (0x08000000) +#define EMAC_CPPI_PASS_CRC_BIT (0x04000000) + +#define EMAC_CPPI_RX_ERROR_FRAME (0x03fc0000) + +#define EMAC_MACCONTROL_MIIEN_ENABLE (0x20) +#define EMAC_MACCONTROL_FULLDUPLEX_ENABLE (0x1) + +#define EMAC_RXMBPENABLE_RXCAFEN_ENABLE (0x200000) +#define EMAC_RXMBPENABLE_RXBROADEN (0x2000) + + +#define MDIO_CONTROL_IDLE (0x80000000) +#define MDIO_CONTROL_ENABLE (0x40000000) +#define MDIO_CONTROL_FAULT_ENABLE (0x40000) +#define MDIO_CONTROL_FAULT (0x80000) +#define MDIO_USERACCESS0_GO (0x80000000) +#define MDIO_USERACCESS0_WRITE_READ (0x0) +#define MDIO_USERACCESS0_WRITE_WRITE (0x40000000) +#define MDIO_USERACCESS0_ACK (0x20000000) + +/* Ethernet MAC Registers Structure */ +typedef struct { + dv_reg TXIDVER; + dv_reg TXCONTROL; + dv_reg TXTEARDOWN; + u_int8_t RSVD0[4]; + dv_reg RXIDVER; + dv_reg RXCONTROL; + dv_reg RXTEARDOWN; + u_int8_t RSVD1[100]; + dv_reg TXINTSTATRAW; + dv_reg TXINTSTATMASKED; + dv_reg TXINTMASKSET; + dv_reg TXINTMASKCLEAR; + dv_reg MACINVECTOR; + u_int8_t RSVD2[12]; + dv_reg RXINTSTATRAW; + dv_reg RXINTSTATMASKED; + dv_reg RXINTMASKSET; + dv_reg RXINTMASKCLEAR; + dv_reg MACINTSTATRAW; + dv_reg MACINTSTATMASKED; + dv_reg MACINTMASKSET; + dv_reg MACINTMASKCLEAR; + u_int8_t RSVD3[64]; + dv_reg RXMBPENABLE; + dv_reg RXUNICASTSET; + dv_reg RXUNICASTCLEAR; + dv_reg RXMAXLEN; + dv_reg RXBUFFEROFFSET; + dv_reg RXFILTERLOWTHRESH; + u_int8_t RSVD4[8]; + dv_reg RX0FLOWTHRESH; + dv_reg RX1FLOWTHRESH; + dv_reg RX2FLOWTHRESH; + dv_reg RX3FLOWTHRESH; + dv_reg RX4FLOWTHRESH; + dv_reg RX5FLOWTHRESH; + dv_reg RX6FLOWTHRESH; + dv_reg RX7FLOWTHRESH; + dv_reg RX0FREEBUFFER; + dv_reg RX1FREEBUFFER; + dv_reg RX2FREEBUFFER; + dv_reg RX3FREEBUFFER; + dv_reg RX4FREEBUFFER; + dv_reg RX5FREEBUFFER; + dv_reg RX6FREEBUFFER; + dv_reg RX7FREEBUFFER; + dv_reg MACCONTROL; + dv_reg MACSTATUS; + dv_reg EMCONTROL; + dv_reg FIFOCONTROL; + dv_reg MACCONFIG; + dv_reg SOFTRESET; + u_int8_t RSVD5[88]; + dv_reg MACSRCADDRLO; + dv_reg MACSRCADDRHI; + dv_reg MACHASH1; + dv_reg MACHASH2; + dv_reg BOFFTEST; + dv_reg TPACETEST; + dv_reg RXPAUSE; + dv_reg TXPAUSE; + u_int8_t RSVD6[16]; + dv_reg RXGOODFRAMES; + dv_reg RXBCASTFRAMES; + dv_reg RXMCASTFRAMES; + dv_reg RXPAUSEFRAMES; + dv_reg RXCRCERRORS; + dv_reg RXALIGNCODEERRORS; + dv_reg RXOVERSIZED; + dv_reg RXJABBER; + dv_reg RXUNDERSIZED; + dv_reg RXFRAGMENTS; + dv_reg RXFILTERED; + dv_reg RXQOSFILTERED; + dv_reg RXOCTETS; + dv_reg TXGOODFRAMES; + dv_reg TXBCASTFRAMES; + dv_reg TXMCASTFRAMES; + dv_reg TXPAUSEFRAMES; + dv_reg TXDEFERRED; + dv_reg TXCOLLISION; + dv_reg TXSINGLECOLL; + dv_reg TXMULTICOLL; + dv_reg TXEXCESSIVECOLL; + dv_reg TXLATECOLL; + dv_reg TXUNDERRUN; + dv_reg TXCARRIERSENSE; + dv_reg TXOCTETS; + dv_reg FRAME64; + dv_reg FRAME65T127; + dv_reg FRAME128T255; + dv_reg FRAME256T511; + dv_reg FRAME512T1023; + dv_reg FRAME1024TUP; + dv_reg NETOCTETS; + dv_reg RXSOFOVERRUNS; + dv_reg RXMOFOVERRUNS; + dv_reg RXDMAOVERRUNS; + u_int8_t RSVD7[624]; + dv_reg MACADDRLO; + dv_reg MACADDRHI; + dv_reg MACINDEX; + u_int8_t RSVD8[244]; + dv_reg TX0HDP; + dv_reg TX1HDP; + dv_reg TX2HDP; + dv_reg TX3HDP; + dv_reg TX4HDP; + dv_reg TX5HDP; + dv_reg TX6HDP; + dv_reg TX7HDP; + dv_reg RX0HDP; + dv_reg RX1HDP; + dv_reg RX2HDP; + dv_reg RX3HDP; + dv_reg RX4HDP; + dv_reg RX5HDP; + dv_reg RX6HDP; + dv_reg RX7HDP; + dv_reg TX0CP; + dv_reg TX1CP; + dv_reg TX2CP; + dv_reg TX3CP; + dv_reg TX4CP; + dv_reg TX5CP; + dv_reg TX6CP; + dv_reg TX7CP; + dv_reg RX0CP; + dv_reg RX1CP; + dv_reg RX2CP; + dv_reg RX3CP; + dv_reg RX4CP; + dv_reg RX5CP; + dv_reg RX6CP; + dv_reg RX7CP; +} emac_regs; + +/* EMAC Wrapper Registers Structure */ +typedef struct { + u_int8_t RSVD0[4100]; + dv_reg EWCTL; + dv_reg EWINTTCNT; +} ewrap_regs; + + +/* EMAC MDIO Registers Structure */ +typedef struct { + dv_reg VERSION; + dv_reg CONTROL; + dv_reg ALIVE; + dv_reg LINK; + dv_reg LINKINTRAW; + dv_reg LINKINTMASKED; + u_int8_t RSVD0[8]; + dv_reg USERINTRAW; + dv_reg USERINTMASKED; + dv_reg USERINTMASKSET; + dv_reg USERINTMASKCLEAR; + u_int8_t RSVD1[80]; + dv_reg USERACCESS0; + dv_reg USERPHYSEL0; + dv_reg USERACCESS1; + dv_reg USERPHYSEL1; +} mdio_regs; + +int dm644x_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data); +int dm644x_eth_phy_write(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data); + +typedef struct +{ + char name[64]; + int (*init)(int phy_addr); + int (*is_phy_connected)(int phy_addr); + int (*get_link_speed)(int phy_addr); + int (*auto_negotiate)(int phy_addr); +} phy_t; + +#define PHY_LXT972 (0x001378e2) +int lxt972_is_phy_connected(int phy_addr); +int lxt972_get_link_speed(int phy_addr); +int lxt972_init_phy(int phy_addr); +int lxt972_auto_negotiate(int phy_addr); + +#define PHY_DP83848 (0x20005c90) +int dp83848_is_phy_connected(int phy_addr); +int dp83848_get_link_speed(int phy_addr); +int dp83848_init_phy(int phy_addr); +int dp83848_auto_negotiate(int phy_addr); + +#endif /* _DM644X_EMAC_H_ */ diff --git a/include/asm-arm/arch-davinci/emif_defs.h b/include/asm-arm/arch-davinci/emif_defs.h new file mode 100644 index 00000000000..646fc774694 --- /dev/null +++ b/include/asm-arm/arch-davinci/emif_defs.h @@ -0,0 +1,61 @@ +/* + * Copyright (C) 2007 Sergey Kubushyn + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _EMIF_DEFS_H_ +#define _EMIF_DEFS_H_ + +#include + +typedef struct { + dv_reg ERCSR; + dv_reg AWCCR; + dv_reg SDBCR; + dv_reg SDRCR; + dv_reg AB1CR; + dv_reg AB2CR; + dv_reg AB3CR; + dv_reg AB4CR; + dv_reg SDTIMR; + dv_reg DDRSR; + dv_reg DDRPHYCR; + dv_reg DDRPHYSR; + dv_reg TOTAR; + dv_reg TOTACTR; + dv_reg DDRPHYID_REV; + dv_reg SDSRETR; + dv_reg EIRR; + dv_reg EIMR; + dv_reg EIMSR; + dv_reg EIMCR; + dv_reg IOCTRLR; + dv_reg IOSTATR; + u_int8_t RSVD0[8]; + dv_reg NANDFCR; + dv_reg NANDFSR; + u_int8_t RSVD1[8]; + dv_reg NANDF1ECC; + dv_reg NANDF2ECC; + dv_reg NANDF3ECC; + dv_reg NANDF4ECC; +} emif_registers; + +typedef emif_registers *emifregs; +#endif diff --git a/include/asm-arm/arch-davinci/hardware.h b/include/asm-arm/arch-davinci/hardware.h new file mode 100644 index 00000000000..ebcdcfea1e9 --- /dev/null +++ b/include/asm-arm/arch-davinci/hardware.h @@ -0,0 +1,166 @@ +/* + * Copyright (C) 2007 Sergey Kubushyn + * + * Based on: + * + * ------------------------------------------------------------------------- + * + * linux/include/asm-arm/arch-davinci/hardware.h + * + * Copyright (C) 2006 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +#include +#include + +#define REG(addr) (*(volatile unsigned int *)(addr)) +#define REG_P(addr) ((volatile unsigned int *)(addr)) + +typedef volatile unsigned int dv_reg; +typedef volatile unsigned int * dv_reg_p; + +/* + * Base register addresses + */ +#define DAVINCI_DMA_3PCC_BASE (0x01c00000) +#define DAVINCI_DMA_3PTC0_BASE (0x01c10000) +#define DAVINCI_DMA_3PTC1_BASE (0x01c10400) +#define DAVINCI_UART0_BASE (0x01c20000) +#define DAVINCI_UART1_BASE (0x01c20400) +#define DAVINCI_UART2_BASE (0x01c20800) +#define DAVINCI_I2C_BASE (0x01c21000) +#define DAVINCI_TIMER0_BASE (0x01c21400) +#define DAVINCI_TIMER1_BASE (0x01c21800) +#define DAVINCI_WDOG_BASE (0x01c21c00) +#define DAVINCI_PWM0_BASE (0x01c22000) +#define DAVINCI_PWM1_BASE (0x01c22400) +#define DAVINCI_PWM2_BASE (0x01c22800) +#define DAVINCI_SYSTEM_MODULE_BASE (0x01c40000) +#define DAVINCI_PLL_CNTRL0_BASE (0x01c40800) +#define DAVINCI_PLL_CNTRL1_BASE (0x01c40c00) +#define DAVINCI_PWR_SLEEP_CNTRL_BASE (0x01c41000) +#define DAVINCI_SYSTEM_DFT_BASE (0x01c42000) +#define DAVINCI_ARM_INTC_BASE (0x01c48000) +#define DAVINCI_IEEE1394_BASE (0x01c60000) +#define DAVINCI_USB_OTG_BASE (0x01c64000) +#define DAVINCI_CFC_ATA_BASE (0x01c66000) +#define DAVINCI_SPI_BASE (0x01c66800) +#define DAVINCI_GPIO_BASE (0x01c67000) +#define DAVINCI_UHPI_BASE (0x01c67800) +#define DAVINCI_VPSS_REGS_BASE (0x01c70000) +#define DAVINCI_EMAC_CNTRL_REGS_BASE (0x01c80000) +#define DAVINCI_EMAC_WRAPPER_CNTRL_REGS_BASE (0x01c81000) +#define DAVINCI_EMAC_WRAPPER_RAM_BASE (0x01c82000) +#define DAVINCI_MDIO_CNTRL_REGS_BASE (0x01c84000) +#define DAVINCI_IMCOP_BASE (0x01cc0000) +#define DAVINCI_ASYNC_EMIF_CNTRL_BASE (0x01e00000) +#define DAVINCI_VLYNQ_BASE (0x01e01000) +#define DAVINCI_MCBSP_BASE (0x01e02000) +#define DAVINCI_MMC_SD_BASE (0x01e10000) +#define DAVINCI_MS_BASE (0x01e20000) +#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE (0x02000000) +#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE (0x04000000) +#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE (0x06000000) +#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE (0x08000000) +#define DAVINCI_VLYNQ_REMOTE_BASE (0x0c000000) + +/* Power and Sleep Controller (PSC) Domains */ +#define DAVINCI_GPSC_ARMDOMAIN 0 +#define DAVINCI_GPSC_DSPDOMAIN 1 + +#define DAVINCI_LPSC_VPSSMSTR 0 +#define DAVINCI_LPSC_VPSSSLV 1 +#define DAVINCI_LPSC_TPCC 2 +#define DAVINCI_LPSC_TPTC0 3 +#define DAVINCI_LPSC_TPTC1 4 +#define DAVINCI_LPSC_EMAC 5 +#define DAVINCI_LPSC_EMAC_WRAPPER 6 +#define DAVINCI_LPSC_MDIO 7 +#define DAVINCI_LPSC_IEEE1394 8 +#define DAVINCI_LPSC_USB 9 +#define DAVINCI_LPSC_ATA 10 +#define DAVINCI_LPSC_VLYNQ 11 +#define DAVINCI_LPSC_UHPI 12 +#define DAVINCI_LPSC_DDR_EMIF 13 +#define DAVINCI_LPSC_AEMIF 14 +#define DAVINCI_LPSC_MMC_SD 15 +#define DAVINCI_LPSC_MEMSTICK 16 +#define DAVINCI_LPSC_McBSP 17 +#define DAVINCI_LPSC_I2C 18 +#define DAVINCI_LPSC_UART0 19 +#define DAVINCI_LPSC_UART1 20 +#define DAVINCI_LPSC_UART2 21 +#define DAVINCI_LPSC_SPI 22 +#define DAVINCI_LPSC_PWM0 23 +#define DAVINCI_LPSC_PWM1 24 +#define DAVINCI_LPSC_PWM2 25 +#define DAVINCI_LPSC_GPIO 26 +#define DAVINCI_LPSC_TIMER0 27 +#define DAVINCI_LPSC_TIMER1 28 +#define DAVINCI_LPSC_TIMER2 29 +#define DAVINCI_LPSC_SYSTEM_SUBSYS 30 +#define DAVINCI_LPSC_ARM 31 +#define DAVINCI_LPSC_SCR2 32 +#define DAVINCI_LPSC_SCR3 33 +#define DAVINCI_LPSC_SCR4 34 +#define DAVINCI_LPSC_CROSSBAR 35 +#define DAVINCI_LPSC_CFG27 36 +#define DAVINCI_LPSC_CFG3 37 +#define DAVINCI_LPSC_CFG5 38 +#define DAVINCI_LPSC_GEM 39 +#define DAVINCI_LPSC_IMCOP 40 + +/* Some PSC defines */ +#define PSC_CHP_SHRTSW (0x01c40038) +#define PSC_GBLCTL (0x01c41010) +#define PSC_EPCPR (0x01c41070) +#define PSC_EPCCR (0x01c41078) +#define PSC_PTCMD (0x01c41120) +#define PSC_PTSTAT (0x01c41128) +#define PSC_PDSTAT (0x01c41200) +#define PSC_PDSTAT1 (0x01c41204) +#define PSC_PDCTL (0x01c41300) +#define PSC_PDCTL1 (0x01c41304) + +#define PSC_MDCTL_BASE (0x01c41a00) +#define PSC_MDSTAT_BASE (0x01c41800) + +#define VDD3P3V_PWDN (0x01c40048) +#define UART0_PWREMU_MGMT (0x01c20030) + +#define PSC_SILVER_BULLET (0x01c41a20) + +/* Some PLL defines */ +#define PLL1_PLLM (0x01c40910) +#define PLL2_PLLM (0x01c40d10) +#define PLL2_DIV2 (0x01c40d1c) + +/* Miscellania... */ +#define VBPR (0x20000020) +#define PINMUX0 (0x01c40000) +#define PINMUX1 (0x01c40004) + +#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/include/asm-arm/arch-davinci/i2c_defs.h b/include/asm-arm/arch-davinci/i2c_defs.h new file mode 100644 index 00000000000..2e902e17f83 --- /dev/null +++ b/include/asm-arm/arch-davinci/i2c_defs.h @@ -0,0 +1,94 @@ +/* + * (C) Copyright 2004 + * Texas Instruments, + * + * Some changes copyright (C) 2007 Sergey Kubushyn + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _DAVINCI_I2C_H_ +#define _DAVINCI_I2C_H_ + +#define I2C_WRITE 0 +#define I2C_READ 1 + +#define I2C_BASE 0x01c21000 + +#define I2C_OA (I2C_BASE + 0x00) +#define I2C_IE (I2C_BASE + 0x04) +#define I2C_STAT (I2C_BASE + 0x08) +#define I2C_SCLL (I2C_BASE + 0x0c) +#define I2C_SCLH (I2C_BASE + 0x10) +#define I2C_CNT (I2C_BASE + 0x14) +#define I2C_DRR (I2C_BASE + 0x18) +#define I2C_SA (I2C_BASE + 0x1c) +#define I2C_DXR (I2C_BASE + 0x20) +#define I2C_CON (I2C_BASE + 0x24) +#define I2C_IV (I2C_BASE + 0x28) +#define I2C_PSC (I2C_BASE + 0x30) + +/* I2C masks */ + +/* I2C Interrupt Enable Register (I2C_IE): */ +#define I2C_IE_SCD_IE (1 << 5) /* Stop condition detect interrupt enable */ +#define I2C_IE_XRDY_IE (1 << 4) /* Transmit data ready interrupt enable */ +#define I2C_IE_RRDY_IE (1 << 3) /* Receive data ready interrupt enable */ +#define I2C_IE_ARDY_IE (1 << 2) /* Register access ready interrupt enable */ +#define I2C_IE_NACK_IE (1 << 1) /* No acknowledgment interrupt enable */ +#define I2C_IE_AL_IE (1 << 0) /* Arbitration lost interrupt enable */ + +/* I2C Status Register (I2C_STAT): */ + +#define I2C_STAT_BB (1 << 12) /* Bus busy */ +#define I2C_STAT_ROVR (1 << 11) /* Receive overrun */ +#define I2C_STAT_XUDF (1 << 10) /* Transmit underflow */ +#define I2C_STAT_AAS (1 << 9) /* Address as slave */ +#define I2C_STAT_SCD (1 << 5) /* Stop condition detect */ +#define I2C_STAT_XRDY (1 << 4) /* Transmit data ready */ +#define I2C_STAT_RRDY (1 << 3) /* Receive data ready */ +#define I2C_STAT_ARDY (1 << 2) /* Register access ready */ +#define I2C_STAT_NACK (1 << 1) /* No acknowledgment interrupt enable */ +#define I2C_STAT_AL (1 << 0) /* Arbitration lost interrupt enable */ + + +/* I2C Interrupt Code Register (I2C_INTCODE): */ + +#define I2C_INTCODE_MASK 7 +#define I2C_INTCODE_NONE 0 +#define I2C_INTCODE_AL 1 /* Arbitration lost */ +#define I2C_INTCODE_NAK 2 /* No acknowledgement/general call */ +#define I2C_INTCODE_ARDY 3 /* Register access ready */ +#define I2C_INTCODE_RRDY 4 /* Rcv data ready */ +#define I2C_INTCODE_XRDY 5 /* Xmit data ready */ +#define I2C_INTCODE_SCD 6 /* Stop condition detect */ + + +/* I2C Configuration Register (I2C_CON): */ + +#define I2C_CON_EN (1 << 5) /* I2C module enable */ +#define I2C_CON_STB (1 << 4) /* Start byte mode (master mode only) */ +#define I2C_CON_MST (1 << 10) /* Master/slave mode */ +#define I2C_CON_TRX (1 << 9) /* Transmitter/receiver mode (master mode only) */ +#define I2C_CON_XA (1 << 8) /* Expand address */ +#define I2C_CON_STP (1 << 11) /* Stop condition (master mode only) */ +#define I2C_CON_STT (1 << 13) /* Start condition (master mode only) */ + +#define I2C_TIMEOUT 0xffff0000 /* Timeout mask for poll_i2c_irq() */ + +#endif diff --git a/include/asm-arm/arch-davinci/nand_defs.h b/include/asm-arm/arch-davinci/nand_defs.h new file mode 100644 index 00000000000..619bd479736 --- /dev/null +++ b/include/asm-arm/arch-davinci/nand_defs.h @@ -0,0 +1,161 @@ +/* + * Copyright (C) 2007 Sergey Kubushyn + * + * Parts shamelesly stolen from Linux Kernel source tree. + * + * ------------------------------------------------------------ + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _NAND_DEFS_H_ +#define _NAND_DEFS_H_ + +#include + +#define MASK_CLE 0x10 +#define MASK_ALE 0x0a + +#define NAND_CE0CLE ((volatile u_int8_t *)(CFG_NAND_BASE + 0x10)) +#define NAND_CE0ALE ((volatile u_int8_t *)(CFG_NAND_BASE + 0x0a)) +#define NAND_CE0DATA ((volatile u_int8_t *)CFG_NAND_BASE) + +typedef struct { + u_int32_t NRCSR; + u_int32_t AWCCR; + u_int8_t RSVD0[8]; + u_int32_t AB1CR; + u_int32_t AB2CR; + u_int32_t AB3CR; + u_int32_t AB4CR; + u_int8_t RSVD1[32]; + u_int32_t NIRR; + u_int32_t NIMR; + u_int32_t NIMSR; + u_int32_t NIMCR; + u_int8_t RSVD2[16]; + u_int32_t NANDFCR; + u_int32_t NANDFSR; + u_int8_t RSVD3[8]; + u_int32_t NANDF1ECC; + u_int32_t NANDF2ECC; + u_int32_t NANDF3ECC; + u_int32_t NANDF4ECC; + u_int8_t RSVD4[4]; + u_int32_t IODFTECR; + u_int32_t IODFTGCR; + u_int8_t RSVD5[4]; + u_int32_t IODFTMRLR; + u_int32_t IODFTMRMR; + u_int32_t IODFTMRMSBR; + u_int8_t RSVD6[20]; + u_int32_t MODRNR; + u_int8_t RSVD7[76]; + u_int32_t CE0DATA; + u_int32_t CE0ALE; + u_int32_t CE0CLE; + u_int8_t RSVD8[4]; + u_int32_t CE1DATA; + u_int32_t CE1ALE; + u_int32_t CE1CLE; + u_int8_t RSVD9[4]; + u_int32_t CE2DATA; + u_int32_t CE2ALE; + u_int32_t CE2CLE; + u_int8_t RSVD10[4]; + u_int32_t CE3DATA; + u_int32_t CE3ALE; + u_int32_t CE3CLE; +} nand_registers; + +typedef volatile nand_registers *nandregs; + +#define NAND_READ_START 0x00 +#define NAND_READ_END 0x30 +#define NAND_STATUS 0x70 + +#ifdef CFG_NAND_HW_ECC +#define NAND_Ecc_P1e (1 << 0) +#define NAND_Ecc_P2e (1 << 1) +#define NAND_Ecc_P4e (1 << 2) +#define NAND_Ecc_P8e (1 << 3) +#define NAND_Ecc_P16e (1 << 4) +#define NAND_Ecc_P32e (1 << 5) +#define NAND_Ecc_P64e (1 << 6) +#define NAND_Ecc_P128e (1 << 7) +#define NAND_Ecc_P256e (1 << 8) +#define NAND_Ecc_P512e (1 << 9) +#define NAND_Ecc_P1024e (1 << 10) +#define NAND_Ecc_P2048e (1 << 11) + +#define NAND_Ecc_P1o (1 << 16) +#define NAND_Ecc_P2o (1 << 17) +#define NAND_Ecc_P4o (1 << 18) +#define NAND_Ecc_P8o (1 << 19) +#define NAND_Ecc_P16o (1 << 20) +#define NAND_Ecc_P32o (1 << 21) +#define NAND_Ecc_P64o (1 << 22) +#define NAND_Ecc_P128o (1 << 23) +#define NAND_Ecc_P256o (1 << 24) +#define NAND_Ecc_P512o (1 << 25) +#define NAND_Ecc_P1024o (1 << 26) +#define NAND_Ecc_P2048o (1 << 27) + +#define TF(v) (v ? 1 : 0) + +#define P2048e(a) (TF(a & NAND_Ecc_P2048e) << 0) +#define P2048o(a) (TF(a & NAND_Ecc_P2048o) << 1) +#define P1e(a) (TF(a & NAND_Ecc_P1e) << 2) +#define P1o(a) (TF(a & NAND_Ecc_P1o) << 3) +#define P2e(a) (TF(a & NAND_Ecc_P2e) << 4) +#define P2o(a) (TF(a & NAND_Ecc_P2o) << 5) +#define P4e(a) (TF(a & NAND_Ecc_P4e) << 6) +#define P4o(a) (TF(a & NAND_Ecc_P4o) << 7) + +#define P8e(a) (TF(a & NAND_Ecc_P8e) << 0) +#define P8o(a) (TF(a & NAND_Ecc_P8o) << 1) +#define P16e(a) (TF(a & NAND_Ecc_P16e) << 2) +#define P16o(a) (TF(a & NAND_Ecc_P16o) << 3) +#define P32e(a) (TF(a & NAND_Ecc_P32e) << 4) +#define P32o(a) (TF(a & NAND_Ecc_P32o) << 5) +#define P64e(a) (TF(a & NAND_Ecc_P64e) << 6) +#define P64o(a) (TF(a & NAND_Ecc_P64o) << 7) + +#define P128e(a) (TF(a & NAND_Ecc_P128e) << 0) +#define P128o(a) (TF(a & NAND_Ecc_P128o) << 1) +#define P256e(a) (TF(a & NAND_Ecc_P256e) << 2) +#define P256o(a) (TF(a & NAND_Ecc_P256o) << 3) +#define P512e(a) (TF(a & NAND_Ecc_P512e) << 4) +#define P512o(a) (TF(a & NAND_Ecc_P512o) << 5) +#define P1024e(a) (TF(a & NAND_Ecc_P1024e) << 6) +#define P1024o(a) (TF(a & NAND_Ecc_P1024o) << 7) + +#define P8e_s(a) (TF(a & NAND_Ecc_P8e) << 0) +#define P8o_s(a) (TF(a & NAND_Ecc_P8o) << 1) +#define P16e_s(a) (TF(a & NAND_Ecc_P16e) << 2) +#define P16o_s(a) (TF(a & NAND_Ecc_P16o) << 3) +#define P1e_s(a) (TF(a & NAND_Ecc_P1e) << 4) +#define P1o_s(a) (TF(a & NAND_Ecc_P1o) << 5) +#define P2e_s(a) (TF(a & NAND_Ecc_P2e) << 6) +#define P2o_s(a) (TF(a & NAND_Ecc_P2o) << 7) + +#define P4e_s(a) (TF(a & NAND_Ecc_P4e) << 0) +#define P4o_s(a) (TF(a & NAND_Ecc_P4o) << 1) +#endif + +#endif diff --git a/include/common.h b/include/common.h index ac29d3aac6c..229e64bd49d 100644 --- a/include/common.h +++ b/include/common.h @@ -241,6 +241,9 @@ int saveenv (void); void inline setenv (char *, char *); #else void setenv (char *, char *); +#ifdef CONFIG_HAS_UID +void forceenv (char *, char *); +#endif #endif /* CONFIG_PPC */ #ifdef CONFIG_ARM # include diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h new file mode 100644 index 00000000000..8ecd0595a20 --- /dev/null +++ b/include/configs/davinci_dvevm.h @@ -0,0 +1,214 @@ +/* + * Copyright (C) 2007 Sergey Kubushyn + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H +#include + +/* + * Define this to make U-Boot skip low level initialization when loaded + * by initial bootloader. Not required by NAND U-Boot version but IS + * required for a NOR version used to burn the real NOR U-Boot into + * NOR Flash. NAND and NOR support for DaVinci chips is mutually exclusive + * so it is NOT possible to build a U-Boot with both NAND and NOR routines. + * NOR U-Boot is loaded directly from Flash so it must perform all the + * low level initialization itself. NAND version is loaded by an initial + * bootloader (UBL in TI-ese) that performs such an initialization so it's + * skipped in NAND version. The third DaVinci boot mode loads a bootloader + * via UART0 and that bootloader in turn loads and runs U-Boot (or whatever) + * performing low level init prior to loading. All that means we can NOT use + * NAND version to put U-Boot into NOR because it doesn't have NOR support and + * we can NOT use NOR version because it performs low level initialization + * effectively destroying itself in DDR memory. That's why a separate NOR + * version with this define is needed. It is loaded via UART, then one uses + * it to somehow download a proper NOR version built WITHOUT this define to + * RAM (tftp?) and burn it to NOR Flash. I would be probably able to squeeze + * NOR support into the initial bootloader so it won't be needed but DaVinci + * static RAM might be too small for this (I have something like 2Kbytes left + * as of now, without NOR support) so this might've not happened... + * +#define CONFIG_NOR_UART_BOOT + */ + +/*=======*/ +/* Board */ +/*=======*/ +#define DV_EVM +#define CFG_NAND_SMALLPAGE +#define CFG_USE_NOR +/*===================*/ +/* SoC Configuration */ +/*===================*/ +#define CONFIG_ARM926EJS /* arm926ejs CPU core */ +#define CONFIG_SYS_CLK_FREQ 297000000 /* Arm Clock frequency */ +#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */ +#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */ +#define CFG_HZ 1000 +/*====================================================*/ +/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */ +/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */ +/*====================================================*/ +#define CFG_I2C_EEPROM_ADDR_LEN 2 +#define CFG_I2C_EEPROM_ADDR 0x50 +#define CFG_EEPROM_PAGE_WRITE_BITS 6 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20 +/*=============*/ +/* Memory Info */ +/*=============*/ +#define CFG_MALLOC_LEN (0x10000 + 128*1024) /* malloc() len */ +#define CFG_GBL_DATA_SIZE 128 /* reserved for initial data */ +#define CFG_MEMTEST_START 0x80000000 /* memtest start address */ +#define CFG_MEMTEST_END 0x81000000 /* 16MB RAM test */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define CONFIG_STACKSIZE (256*1024) /* regular stack */ +#define PHYS_SDRAM_1 0x80000000 /* DDR Start */ +#define PHYS_SDRAM_1_SIZE 0x10000000 /* DDR size 256MB */ +#define DDR_8BANKS /* 8-bank DDR2 (256MB) */ +/*====================*/ +/* Serial Driver info */ +/*====================*/ +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 4 /* NS16550 register size */ +#define CFG_NS16550_COM1 0x01c20000 /* Base address of UART0 */ +#define CFG_NS16550_CLK 27000000 /* Input clock to NS16550 */ +#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ +#define CONFIG_BAUDRATE 115200 /* Default baud rate */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +/*===================*/ +/* I2C Configuration */ +/*===================*/ +#define CONFIG_HARD_I2C +#define CONFIG_DRIVER_DAVINCI_I2C +#define CFG_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */ +#define CFG_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ +/*==================================*/ +/* Network & Ethernet Configuration */ +/*==================================*/ +#define CONFIG_DRIVER_TI_EMAC +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_NET_RETRY_COUNT 10 +/*=====================*/ +/* Flash & Environment */ +/*=====================*/ +#ifdef CFG_USE_NAND +#undef CFG_ENV_IS_IN_FLASH +#define CFG_NO_FLASH +#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ +#ifdef CFG_NAND_SMALLPAGE +#define CFG_ENV_SECT_SIZE 512 /* Env sector Size */ +#define CFG_ENV_SIZE SZ_16K +#else +#define CFG_ENV_SECT_SIZE 2048 /* Env sector Size */ +#define CFG_ENV_SIZE SZ_128K +#endif +#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ +#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ +#define CFG_NAND_BASE 0x02000000 +#define CFG_NAND_HW_ECC +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_MAX_CHIPS 1 +#define CFG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ +#define DEF_BOOTM "" +#elif defined(CFG_USE_NOR) +#ifdef CONFIG_NOR_UART_BOOT +#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ +#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ +#else +#undef CONFIG_SKIP_LOWLEVEL_INIT +#undef CONFIG_SKIP_RELOCATE_UBOOT +#endif +#define CFG_ENV_IS_IN_FLASH +#undef CFG_NO_FLASH +#define CFG_FLASH_CFI_DRIVER +#define CFG_FLASH_CFI +#define CFG_MAX_FLASH_BANKS 1 /* max number of flash banks */ +#define CFG_FLASH_SECT_SZ 0x10000 /* 64KB sect size AMD Flash */ +#define CFG_ENV_OFFSET (CFG_FLASH_SECT_SZ*3) +#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */ +#define CFG_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */ +#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */ +#define CFG_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CFG_FLASH_SECT_SZ) +#define CFG_ENV_SECT_SIZE CFG_FLASH_SECT_SZ /* Env sector Size */ +#endif +/*==============================*/ +/* U-Boot general configuration */ +/*==============================*/ +#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ +#define CONFIG_MISC_INIT_R +#undef CONFIG_BOOTDELAY +#define CONFIG_BOOTFILE "uImage" /* Boot file name */ +#define CFG_PROMPT "U-Boot > " /* Monitor Command Prompt */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buffer sz */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_LOAD_ADDR 0x80700000 /* default Linux kernel load address */ +#define CONFIG_VERSION_VARIABLE +#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */ +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#define CONFIG_CMDLINE_EDITING +#define CFG_LONGHELP +#define CONFIG_CRC32_VERIFY +#define CONFIG_MX_CYCLIC +/*===================*/ +/* Linux Information */ +/*===================*/ +#define LINUX_BOOT_PARAM_ADDR 0x80000100 +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_BOOTARGS "mem=120M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp" +#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot; bootm 0x2050000" +/*=================*/ +/* U-Boot commands */ +/*=================*/ +#include +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_EEPROM +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_SETGETDCR +#ifdef CFG_USE_NAND +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS +#define CONFIG_CMD_NAND +#elif defined(CFG_USE_NOR) +#define CONFIG_CMD_JFFS2 +#else +#error "Either CFG_USE_NAND or CFG_USE_NOR _MUST_ be defined !!!" +#endif +/*=======================*/ +/* KGDB support (if any) */ +/*=======================*/ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ +#endif +#endif /* __CONFIG_H */ diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h new file mode 100644 index 00000000000..96c9a301478 --- /dev/null +++ b/include/configs/davinci_schmoogie.h @@ -0,0 +1,157 @@ +/* + * Copyright (C) 2007 Sergey Kubushyn + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H +#include + +/*=======*/ +/* Board */ +/*=======*/ +#define SCHMOOGIE +#define CFG_NAND_LARGEPAGE +#define CFG_USE_NAND +/*===================*/ +/* SoC Configuration */ +/*===================*/ +#define CONFIG_ARM926EJS /* arm926ejs CPU core */ +#define CONFIG_SYS_CLK_FREQ 297000000 /* Arm Clock frequency */ +#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */ +#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */ +#define CFG_HZ 1000 +/*=============*/ +/* Memory Info */ +/*=============*/ +#define CFG_MALLOC_LEN (0x10000 + 256*1024) /* malloc() len */ +#define CFG_GBL_DATA_SIZE 128 /* reserved for initial data */ +#define CFG_MEMTEST_START 0x80000000 /* memtest start address */ +#define CFG_MEMTEST_END 0x81000000 /* 16MB RAM test */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define CONFIG_STACKSIZE (256*1024) /* regular stack */ +#define PHYS_SDRAM_1 0x80000000 /* DDR Start */ +#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */ +#define DDR_4BANKS /* 4-bank DDR2 (128MB) */ +/*====================*/ +/* Serial Driver info */ +/*====================*/ +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 4 /* NS16550 register size */ +#define CFG_NS16550_COM1 0x01c20000 /* Base address of UART0 */ +#define CFG_NS16550_CLK 27000000 /* Input clock to NS16550 */ +#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ +#define CONFIG_BAUDRATE 115200 /* Default baud rate */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +/*===================*/ +/* I2C Configuration */ +/*===================*/ +#define CONFIG_HARD_I2C +#define CONFIG_DRIVER_DAVINCI_I2C +#define CFG_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */ +#define CFG_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ +/*==================================*/ +/* Network & Ethernet Configuration */ +/*==================================*/ +#define CONFIG_DRIVER_TI_EMAC +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_NET_RETRY_COUNT 10 +#define CONFIG_OVERWRITE_ETHADDR_ONCE +/*=====================*/ +/* Flash & Environment */ +/*=====================*/ +#undef CFG_ENV_IS_IN_FLASH +#define CFG_NO_FLASH +#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ +#define CFG_ENV_SECT_SIZE 2048 /* Env sector Size */ +#define CFG_ENV_SIZE SZ_128K +#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ +#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ +#define CFG_NAND_BASE 0x02000000 +#define CFG_NAND_HW_ECC +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_MAX_CHIPS 1 +#define CFG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ +/*=====================*/ +/* Board related stuff */ +/*=====================*/ +#define CONFIG_RTC_DS1307 /* RTC chip on SCHMOOGIE */ +#define CFG_I2C_RTC_ADDR 0x6f /* RTC chip I2C address */ +#define CONFIG_HAS_UID +#define CONFIG_UID_DS28CM00 /* Unique ID on SCHMOOGIE */ +#define CFG_UID_ADDR 0x50 /* UID chip I2C address */ +/*==============================*/ +/* U-Boot general configuration */ +/*==============================*/ +#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ +#define CONFIG_MISC_INIT_R +#undef CONFIG_BOOTDELAY +#define CONFIG_BOOTFILE "uImage" /* Boot file name */ +#define CFG_PROMPT "U-Boot > " /* Monitor Command Prompt */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buffer sz */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_LOAD_ADDR 0x80700000 /* default Linux kernel load address */ +#define CONFIG_VERSION_VARIABLE +#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */ +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#define CONFIG_CMDLINE_EDITING +#define CFG_LONGHELP +#define CONFIG_CRC32_VERIFY +#define CONFIG_MX_CYCLIC +/*===================*/ +/* Linux Information */ +/*===================*/ +#define LINUX_BOOT_PARAM_ADDR 0x80000100 +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_BOOTARGS "mem=56M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp" +#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot" +/*=================*/ +/* U-Boot commands */ +/*=================*/ +#include +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_DATE +#define CONFIG_CMD_NAND +#undef CONFIG_CMD_EEPROM +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS +/*=======================*/ +/* KGDB support (if any) */ +/*=======================*/ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ +#endif +#endif /* __CONFIG_H */ diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h new file mode 100644 index 00000000000..de8c4fac2b0 --- /dev/null +++ b/include/configs/davinci_sonata.h @@ -0,0 +1,209 @@ +/* + * Copyright (C) 2007 Sergey Kubushyn + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H +#include + +/* + * Define this to make U-Boot skip low level initialization when loaded + * by initial bootloader. Not required by NAND U-Boot version but IS + * required for a NOR version used to burn the real NOR U-Boot into + * NOR Flash. NAND and NOR support for DaVinci chips is mutually exclusive + * so it is NOT possible to build a U-Boot with both NAND and NOR routines. + * NOR U-Boot is loaded directly from Flash so it must perform all the + * low level initialization itself. NAND version is loaded by an initial + * bootloader (UBL in TI-ese) that performs such an initialization so it's + * skipped in NAND version. The third DaVinci boot mode loads a bootloader + * via UART0 and that bootloader in turn loads and runs U-Boot (or whatever) + * performing low level init prior to loading. All that means we can NOT use + * NAND version to put U-Boot into NOR because it doesn't have NOR support and + * we can NOT use NOR version because it performs low level initialization + * effectively destroying itself in DDR memory. That's why a separate NOR + * version with this define is needed. It is loaded via UART, then one uses + * it to somehow download a proper NOR version built WITHOUT this define to + * RAM (tftp?) and burn it to NOR Flash. I would be probably able to squeeze + * NOR support into the initial bootloader so it won't be needed but DaVinci + * static RAM might be too small for this (I have something like 2Kbytes left + * as of now, without NOR support) so this might've not happened... + * +#define CONFIG_NOR_UART_BOOT + */ + +/*=======*/ +/* Board */ +/*=======*/ +#define SONATA_BOARD +#define CFG_NAND_SMALLPAGE +#define CFG_USE_NOR +/*===================*/ +/* SoC Configuration */ +/*===================*/ +#define CONFIG_ARM926EJS /* arm926ejs CPU core */ +#define CONFIG_SYS_CLK_FREQ 297000000 /* Arm Clock frequency */ +#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */ +#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */ +#define CFG_HZ 1000 +/*====================================================*/ +/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */ +/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */ +/*====================================================*/ +#define CFG_I2C_EEPROM_ADDR_LEN 2 +#define CFG_I2C_EEPROM_ADDR 0x50 +#define CFG_EEPROM_PAGE_WRITE_BITS 6 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20 +/*=============*/ +/* Memory Info */ +/*=============*/ +#define CFG_MALLOC_LEN (0x10000 + 128*1024) /* malloc() len */ +#define CFG_GBL_DATA_SIZE 128 /* reserved for initial data */ +#define CFG_MEMTEST_START 0x80000000 /* memtest start address */ +#define CFG_MEMTEST_END 0x81000000 /* 16MB RAM test */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define CONFIG_STACKSIZE (256*1024) /* regular stack */ +#define PHYS_SDRAM_1 0x80000000 /* DDR Start */ +#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */ +#define DDR_4BANKS /* 4-bank DDR2 (128MB) */ +/*====================*/ +/* Serial Driver info */ +/*====================*/ +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 4 /* NS16550 register size */ +#define CFG_NS16550_COM1 0x01c20000 /* Base address of UART0 */ +#define CFG_NS16550_CLK 27000000 /* Input clock to NS16550 */ +#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ +#define CONFIG_BAUDRATE 115200 /* Default baud rate */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +/*===================*/ +/* I2C Configuration */ +/*===================*/ +#define CONFIG_HARD_I2C +#define CONFIG_DRIVER_DAVINCI_I2C +#define CFG_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */ +#define CFG_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ +/*==================================*/ +/* Network & Ethernet Configuration */ +/*==================================*/ +#define CONFIG_DRIVER_TI_EMAC +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_NET_RETRY_COUNT 10 +/*=====================*/ +/* Flash & Environment */ +/*=====================*/ +#ifdef CFG_USE_NAND +#undef CFG_ENV_IS_IN_FLASH +#define CFG_NO_FLASH +#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ +#define CFG_ENV_SECT_SIZE 512 /* Env sector Size */ +#define CFG_ENV_SIZE SZ_16K +#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ +#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ +#define CFG_NAND_BASE 0x02000000 +#define CFG_NAND_HW_ECC +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_MAX_CHIPS 1 +#define CFG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ +#define DEF_BOOTM "" +#elif defined(CFG_USE_NOR) +#ifdef CONFIG_NOR_UART_BOOT +#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ +#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ +#else +#undef CONFIG_SKIP_LOWLEVEL_INIT +#undef CONFIG_SKIP_RELOCATE_UBOOT +#endif +#define CFG_ENV_IS_IN_FLASH +#undef CFG_NO_FLASH +#define CFG_FLASH_CFI_DRIVER +#define CFG_FLASH_CFI +#define CFG_MAX_FLASH_BANKS 1 /* max number of flash banks */ +#define CFG_FLASH_SECT_SZ 0x20000 /* 128KB sect size AMD Flash */ +#define CFG_ENV_OFFSET (CFG_FLASH_SECT_SZ*2) +#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */ +#define CFG_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */ +#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */ +#define CFG_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CFG_FLASH_SECT_SZ) +#define CFG_ENV_SECT_SIZE CFG_FLASH_SECT_SZ /* Env sector Size */ +#endif +/*==============================*/ +/* U-Boot general configuration */ +/*==============================*/ +#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ +#define CONFIG_MISC_INIT_R +#undef CONFIG_BOOTDELAY +#define CONFIG_BOOTFILE "uImage" /* Boot file name */ +#define CFG_PROMPT "U-Boot > " /* Monitor Command Prompt */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buffer sz */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_LOAD_ADDR 0x80700000 /* default Linux kernel load address */ +#define CONFIG_VERSION_VARIABLE +#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */ +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#define CONFIG_CMDLINE_EDITING +#define CFG_LONGHELP +#define CONFIG_CRC32_VERIFY +#define CONFIG_MX_CYCLIC +/*===================*/ +/* Linux Information */ +/*===================*/ +#define LINUX_BOOT_PARAM_ADDR 0x80000100 +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_BOOTARGS "mem=56M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp" +#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot; bootm 0x2060000" +/*=================*/ +/* U-Boot commands */ +/*=================*/ +#include +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_EEPROM +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_SETGETDCR +#ifdef CFG_USE_NAND +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS +#define CONFIG_CMD_NAND +#elif defined(CFG_USE_NOR) +#define CONFIG_CMD_JFFS2 +#else +#error "Either CFG_USE_NAND or CFG_USE_NOR _MUST_ be defined !!!" +#endif +/*=======================*/ +/* KGDB support (if any) */ +/*=======================*/ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ +#endif +#endif /* __CONFIG_H */ diff --git a/include/dp83848.h b/include/dp83848.h new file mode 100644 index 00000000000..274bc4c969c --- /dev/null +++ b/include/dp83848.h @@ -0,0 +1,88 @@ +/* + * DP83848 ethernet Physical layer + * + * Copyright (C) 2007 Sergey Kubushyn + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + + +/* National Semiconductor PHYSICAL LAYER TRANSCEIVER DP83848 */ + +#define DP83848_CTL_REG 0x0 /* Basic Mode Control Reg */ +#define DP83848_STAT_REG 0x1 /* Basic Mode Status Reg */ +#define DP83848_PHYID1_REG 0x2 /* PHY Idendifier Reg 1 */ +#define DP83848_PHYID2_REG 0x3 /* PHY Idendifier Reg 2 */ +#define DP83848_ANA_REG 0x4 /* Auto_Neg Advt Reg */ +#define DP83848_ANLPA_REG 0x5 /* Auto_neg Link Partner Ability Reg */ +#define DP83848_ANE_REG 0x6 /* Auto-neg Expansion Reg */ +#define DP83848_PHY_STAT_REG 0x10 /* PHY Status Register */ +#define DP83848_PHY_INTR_CTRL_REG 0x11 /* PHY Interrupt Control Register */ +#define DP83848_PHY_CTRL_REG 0x19 /* PHY Status Register */ + +/*--Bit definitions: DP83848_CTL_REG */ +#define DP83848_RESET (1 << 15) /* 1= S/W Reset */ +#define DP83848_LOOPBACK (1 << 14) /* 1=loopback Enabled */ +#define DP83848_SPEED_SELECT (1 << 13) +#define DP83848_AUTONEG (1 << 12) +#define DP83848_POWER_DOWN (1 << 11) +#define DP83848_ISOLATE (1 << 10) +#define DP83848_RESTART_AUTONEG (1 << 9) +#define DP83848_DUPLEX_MODE (1 << 8) +#define DP83848_COLLISION_TEST (1 << 7) + +/*--Bit definitions: DP83848_STAT_REG */ +#define DP83848_100BASE_T4 (1 << 15) +#define DP83848_100BASE_TX_FD (1 << 14) +#define DP83848_100BASE_TX_HD (1 << 13) +#define DP83848_10BASE_T_FD (1 << 12) +#define DP83848_10BASE_T_HD (1 << 11) +#define DP83848_MF_PREAMB_SUPPR (1 << 6) +#define DP83848_AUTONEG_COMP (1 << 5) +#define DP83848_RMT_FAULT (1 << 4) +#define DP83848_AUTONEG_ABILITY (1 << 3) +#define DP83848_LINK_STATUS (1 << 2) +#define DP83848_JABBER_DETECT (1 << 1) +#define DP83848_EXTEND_CAPAB (1 << 0) + +/*--definitions: DP83848_PHYID1 */ +#define DP83848_PHYID1_OUI 0x2000 +#define DP83848_PHYID2_OUI 0x5c90 + +/*--Bit definitions: DP83848_ANAR, DP83848_ANLPAR */ +#define DP83848_NP (1 << 15) +#define DP83848_ACK (1 << 14) +#define DP83848_RF (1 << 13) +#define DP83848_PAUSE (1 << 10) +#define DP83848_T4 (1 << 9) +#define DP83848_TX_FDX (1 << 8) +#define DP83848_TX_HDX (1 << 7) +#define DP83848_10_FDX (1 << 6) +#define DP83848_10_HDX (1 << 5) +#define DP83848_AN_IEEE_802_3 0x0001 + +/*--Bit definitions: DP83848_ANER */ +#define DP83848_PDF (1 << 4) +#define DP83848_LP_NP_ABLE (1 << 3) +#define DP83848_NP_ABLE (1 << 2) +#define DP83848_PAGE_RX (1 << 1) +#define DP83848_LP_AN_ABLE (1 << 0) + +/*--Bit definitions: DP83848_PHY_STAT */ +#define DP83848_RX_ERR_LATCH (1 << 13) +#define DP83848_POLARITY_STAT (1 << 12) +#define DP83848_FALSE_CAR_SENSE (1 << 11) +#define DP83848_SIG_DETECT (1 << 10) +#define DP83848_DESCRAM_LOCK (1 << 9) +#define DP83848_PAGE_RCV (1 << 8) +#define DP83848_PHY_RMT_FAULT (1 << 6) +#define DP83848_JABBER (1 << 5) +#define DP83848_AUTONEG_COMPLETE (1 << 4) +#define DP83848_LOOPBACK_STAT (1 << 3) +#define DP83848_DUPLEX (1 << 2) +#define DP83848_SPEED (1 << 1) +#define DP83848_LINK (1 << 0) diff --git a/include/exports.h b/include/exports.h index 0516da93749..d6512cb3a45 100644 --- a/include/exports.h +++ b/include/exports.h @@ -25,6 +25,9 @@ char *getenv (char *name); void setenv (char *varname, char *varvalue); long simple_strtol(const char *cp,char **endp,unsigned int base); int strcmp(const char * cs,const char * ct); +#ifdef CONFIG_HAS_UID +void forceenv (char *varname, char *varvalue); +#endif #if defined(CONFIG_CMD_I2C) int i2c_write (uchar, uint, int , uchar* , int); int i2c_read (uchar, uint, int , uchar* , int); diff --git a/lib_arm/board.c b/lib_arm/board.c index 8f4e19bfcb5..d37e5dab352 100644 --- a/lib_arm/board.c +++ b/lib_arm/board.c @@ -364,6 +364,13 @@ void start_armboot (void) enable_interrupts (); /* Perform network card initialisation if necessary */ +#ifdef CONFIG_DRIVER_TI_EMAC +extern void dm644x_eth_set_mac_addr (const u_int8_t *addr); + if (getenv ("ethaddr")) { + dm644x_eth_set_mac_addr(gd->bd->bi_enetaddr); + } +#endif + #ifdef CONFIG_DRIVER_CS8900 cs8900_get_enetaddr (gd->bd->bi_enetaddr); #endif diff --git a/net/eth.c b/net/eth.c index 6576ee405bb..c8f92a52634 100644 --- a/net/eth.c +++ b/net/eth.c @@ -464,6 +464,8 @@ extern int at91rm9200_miiphy_initialize(bd_t *bis); extern int emac4xx_miiphy_initialize(bd_t *bis); extern int mcf52x2_miiphy_initialize(bd_t *bis); extern int ns7520_miiphy_initialize(bd_t *bis); +extern int dm644x_eth_miiphy_initialize(bd_t *bis); + int eth_initialize(bd_t *bis) { @@ -483,6 +485,9 @@ int eth_initialize(bd_t *bis) #endif #if defined(CONFIG_NETARM) ns7520_miiphy_initialize(bis); +#endif +#if defined(CONFIG_DRIVER_TI_EMAC) + dm644x_eth_miiphy_initialize(bis); #endif return 0; } -- cgit v1.3.1 From c646bba6465a45c60746d4cc1602cd06c1960f2d Mon Sep 17 00:00:00 2001 From: Joe Hamman Date: Thu, 9 Aug 2007 15:11:03 -0500 Subject: Add support for SBC8641D. Config files. Add support for Wind River's SBC8641D reference board. Signed-off by: Joe Hamman Acked-by: Wolfgang Denk Acked-by: Jon Loeliger --- MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 2 + doc/README.sbc8641d | 28 +++ include/configs/sbc8641d.h | 599 +++++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 634 insertions(+) create mode 100644 doc/README.sbc8641d create mode 100644 include/configs/sbc8641d.h (limited to 'Makefile') diff --git a/MAINTAINERS b/MAINTAINERS index 693b1157290..703f2fe48e5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -179,6 +179,10 @@ Howard Gray MVS1 MPC823 +Joe Hamman + + sbc8641d MPC8641D + Klaus Heydeck KUP4K MPC855 diff --git a/MAKEALL b/MAKEALL index 3e186ccd5a3..22b12061eba 100755 --- a/MAKEALL +++ b/MAKEALL @@ -165,6 +165,7 @@ LIST_85xx=" \ LIST_86xx=" \ MPC8641HPCN \ + SBC8641D \ " ######################################################################### diff --git a/Makefile b/Makefile index 2a18a4d6aba..4b607365fbc 100644 --- a/Makefile +++ b/Makefile @@ -1866,6 +1866,8 @@ TQM8560_config: unconfig MPC8641HPCN_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8641hpcn +sbc8641d_config: unconfig + @./mkconfig $(@:_config=) ppc mpc86xx sbc8641d ######################################################################### ## 74xx/7xx Systems diff --git a/doc/README.sbc8641d b/doc/README.sbc8641d new file mode 100644 index 00000000000..a051466a11b --- /dev/null +++ b/doc/README.sbc8641d @@ -0,0 +1,28 @@ +Wind River SBC8641D reference board +=========================== + +Created 06/14/2007 Joe Hamman +Copyright 2007, Embedded Specialties, Inc. +Copyright 2007 Wind River Systemes, Inc. +----------------------------- + +1. Building U-Boot +------------------ +The SBC8641D code is known to build using ELDK 4.1. + + $ make sbc8641d_config + Configuring for sbc8641d board... + + $ make + + +2. Switch and Jumper Settings +----------------------------- +All Jumpers & Switches are in their default positions. Please refer to +the board documentation for details. Some settings control CPU voltages +and settings may change with board revisions. + +3. Known limitations +-------------------- +PCI: + The PCI command may hang if no boards are present in either slot. diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h new file mode 100644 index 00000000000..dba19441c78 --- /dev/null +++ b/include/configs/sbc8641d.h @@ -0,0 +1,599 @@ +/* + * Copyright 2007 Wind River Systems + * Copyright 2007 Embedded Specialties, Inc. + * Joe Hamman + * + * Copyright 2006 Freescale Semiconductor. + * + * Srikanth Srinivasan (srikanth.srinivasan@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * SBC8641D board configuration file + * + * Make sure you change the MAC address and other network params first, + * search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* High Level Configuration Options */ +#define CONFIG_MPC86xx 1 /* MPC86xx */ +#define CONFIG_MPC8641 1 /* MPC8641 specific */ +#define CONFIG_SBC8641D 1 /* SBC8641D board specific */ +#define CONFIG_NUM_CPUS 2 /* Number of CPUs in the system */ +#define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */ + +#ifdef RUN_DIAG +#define CFG_DIAG_ADDR 0xff800000 +#endif + +#define CFG_RESET_ADDRESS 0xfff00100 + +#undef CONFIG_PCI +#define CONFIG_FSL_PCI_INIT 1 + +#define CONFIG_TSEC_ENET /* tsec ethernet support */ +#define CONFIG_ENV_OVERWRITE + +#undef CONFIG_SPD_EEPROM /* Do not use SPD EEPROM for DDR setup*/ +#undef CONFIG_DDR_DLL /* possible DLL fix needed */ +#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */ +#undef CONFIG_DDR_ECC /* only for ECC DDR module */ +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ +#define CONFIG_MEM_INIT_VALUE 0xDeadBeef +#define CONFIG_NUM_DDR_CONTROLLERS 2 +#define CACHE_LINE_INTERLEAVING 0x20000000 +#define PAGE_INTERLEAVING 0x21000000 +#define BANK_INTERLEAVING 0x22000000 +#define SUPER_BANK_INTERLEAVING 0x23000000 + + +#define CONFIG_ALTIVEC 1 + +/* + * L2CR setup -- make sure this is right for your board! + */ +#define CFG_L2 +#define L2_INIT 0 +#define L2_ENABLE (L2CR_L2E) + +#ifndef CONFIG_SYS_CLK_FREQ +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) +#endif + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ + +#undef CFG_DRAM_TEST /* memory test, takes time */ +#define CFG_MEMTEST_START 0x00200000 /* memtest region */ +#define CFG_MEMTEST_END 0x00400000 + +/* + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + */ +#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ +#define CFG_CCSRBAR 0xf8000000 /* relocated CCSRBAR */ +#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */ + +/* + * DDR Setup + */ +#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */ +#define CFG_DDR_SDRAM_BASE2 0x10000000 /* DDR bank 2 */ +#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE +#define CFG_SDRAM_BASE2 CFG_DDR_SDRAM_BASE2 +#define CONFIG_VERY_BIG_RAM + +#define MPC86xx_DDR_SDRAM_CLK_CNTL + +#if defined(CONFIG_SPD_EEPROM) + /* + * Determine DDR configuration from I2C interface. + */ + #define SPD_EEPROM_ADDRESS1 0x51 /* DDR DIMM */ + #define SPD_EEPROM_ADDRESS2 0x52 /* DDR DIMM */ + #define SPD_EEPROM_ADDRESS3 0x53 /* DDR DIMM */ + #define SPD_EEPROM_ADDRESS4 0x54 /* DDR DIMM */ + +#else + /* + * Manually set up DDR1 & DDR2 parameters + */ + + #define CFG_SDRAM_SIZE 512 /* DDR is 512MB */ + + #define CFG_DDR_CS0_BNDS 0x0000000F + #define CFG_DDR_CS1_BNDS 0x00000000 + #define CFG_DDR_CS2_BNDS 0x00000000 + #define CFG_DDR_CS3_BNDS 0x00000000 + #define CFG_DDR_CS0_CONFIG 0x80010102 + #define CFG_DDR_CS1_CONFIG 0x00000000 + #define CFG_DDR_CS2_CONFIG 0x00000000 + #define CFG_DDR_CS3_CONFIG 0x00000000 + #define CFG_DDR_EXT_REFRESH 0x00000000 + #define CFG_DDR_TIMING_0 0x00220802 + #define CFG_DDR_TIMING_1 0x38377322 + #define CFG_DDR_TIMING_2 0x002040c7 + #define CFG_DDR_CFG_1A 0x43008008 + #define CFG_DDR_CFG_2 0x24401000 + #define CFG_DDR_MODE_1 0x23c00542 + #define CFG_DDR_MODE_2 0x00000000 + #define CFG_DDR_MODE_CTL 0x00000000 + #define CFG_DDR_INTERVAL 0x05080100 + #define CFG_DDR_DATA_INIT 0x00000000 + #define CFG_DDR_CLK_CTRL 0x03800000 + #define CFG_DDR_CFG_1B 0xC3008008 + + #define CFG_DDR2_CS0_BNDS 0x0010001F + #define CFG_DDR2_CS1_BNDS 0x00000000 + #define CFG_DDR2_CS2_BNDS 0x00000000 + #define CFG_DDR2_CS3_BNDS 0x00000000 + #define CFG_DDR2_CS0_CONFIG 0x80010102 + #define CFG_DDR2_CS1_CONFIG 0x00000000 + #define CFG_DDR2_CS2_CONFIG 0x00000000 + #define CFG_DDR2_CS3_CONFIG 0x00000000 + #define CFG_DDR2_EXT_REFRESH 0x00000000 + #define CFG_DDR2_TIMING_0 0x00220802 + #define CFG_DDR2_TIMING_1 0x38377322 + #define CFG_DDR2_TIMING_2 0x002040c7 + #define CFG_DDR2_CFG_1A 0x43008008 + #define CFG_DDR2_CFG_2 0x24401000 + #define CFG_DDR2_MODE_1 0x23c00542 + #define CFG_DDR2_MODE_2 0x00000000 + #define CFG_DDR2_MODE_CTL 0x00000000 + #define CFG_DDR2_INTERVAL 0x05080100 + #define CFG_DDR2_DATA_INIT 0x00000000 + #define CFG_DDR2_CLK_CTRL 0x03800000 + #define CFG_DDR2_CFG_1B 0xC3008008 + + +#endif + +/* #define CFG_ID_EEPROM 1 +#define ID_EEPROM_ADDR 0x57 */ + +/* + * The SBC8641D contains 16MB flash space at ff000000. + */ +#define CFG_FLASH_BASE 0xff000000 /* start of FLASH 16M */ + +/* Flash */ +#define CFG_BR0_PRELIM 0xff001001 /* port size 16bit */ +#define CFG_OR0_PRELIM 0xff006e65 /* 16MB Boot Flash area */ + +/* 64KB EEPROM */ +#define CFG_BR1_PRELIM 0xf0000801 /* port size 16bit */ +#define CFG_OR1_PRELIM 0xffff6e65 /* 64K EEPROM area */ + +/* EPLD - User switches, board id, LEDs */ +#define CFG_BR2_PRELIM 0xf1000801 /* port size 16bit */ +#define CFG_OR2_PRELIM 0xfff06e65 /* EPLD (switches, board ID, LEDs) area */ + +/* Local bus SDRAM 128MB */ +#define CFG_BR3_PRELIM 0xe0001861 /* port size ?bit */ +#define CFG_OR3_PRELIM 0xfc006cc0 /* 128MB local bus SDRAM area (1st half) */ +#define CFG_BR4_PRELIM 0xe4001861 /* port size ?bit */ +#define CFG_OR4_PRELIM 0xfc006cc0 /* 128MB local bus SDRAM area (2nd half) */ + +/* Disk on Chip (DOC) 128MB */ +#define CFG_BR5_PRELIM 0xe8001001 /* port size ?bit */ +#define CFG_OR5_PRELIM 0xf8006e65 /* 128MB local bus SDRAM area (2nd half) */ + +/* LCD */ +#define CFG_BR6_PRELIM 0xf4000801 /* port size ?bit */ +#define CFG_OR6_PRELIM 0xfff06e65 /* 128MB local bus SDRAM area (2nd half) */ + +/* Control logic & misc peripherals */ +#define CFG_BR7_PRELIM 0xf2000801 /* port size ?bit */ +#define CFG_OR7_PRELIM 0xfff06e65 /* 128MB local bus SDRAM area (2nd half) */ + +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ +#define CFG_MAX_FLASH_SECT 131 /* sectors per device */ + +#undef CFG_FLASH_CHECKSUM +#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ + +#define CFG_FLASH_CFI_DRIVER +#define CFG_FLASH_CFI +#define CFG_WRITE_SWAPPED_DATA +#define CFG_FLASH_EMPTY_INFO +#define CFG_FLASH_PROTECTION + +#undef CONFIG_CLOCKS_IN_MHZ + +#define CONFIG_L1_INIT_RAM +#define CFG_INIT_RAM_LOCK 1 +#ifndef CFG_INIT_RAM_LOCK +#define CFG_INIT_RAM_ADDR 0x0fd00000 /* Initial RAM address */ +#else +#define CFG_INIT_RAM_ADDR 0xf8400000 /* Initial RAM address */ +#endif +#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */ + +#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ + +/* Serial Port */ +#define CONFIG_CONS_INDEX 1 +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_CLK get_bus_freq(0) + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} + +#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500) +#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600) + +/* Use the HUSH parser */ +#define CFG_HUSH_PARSER +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +/* + * Pass open firmware flat tree to kernel + */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 + +/* maximum size of the flat tree (8K) */ +#define OF_FLAT_TREE_MAX_SIZE 8192 + +#define OF_CPU "PowerPC,8641@0" +#define OF_SOC "soc@f8000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc@f8000000/serial@4500" + +#define CFG_64BIT_VSPRINTF 1 +#define CFG_64BIT_STRTOUL 1 + +/* + * I2C + */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3100 + +/* + * RapidIO MMU + */ +#define CFG_RIO_MEM_BASE 0xc0000000 /* base address */ +#define CFG_RIO_MEM_PHYS CFG_RIO_MEM_BASE +#define CFG_RIO_MEM_SIZE 0x20000000 /* 128M */ + +/* + * General PCI + * Addresses are mapped 1-1. + */ +#define CFG_PCI1_MEM_BASE 0x80000000 +#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE +#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ +#define CFG_PCI1_IO_BASE 0xe2000000 +#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE +#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */ + +/* PCI view of System Memory */ +#define CFG_PCI_MEMORY_BUS 0x00000000 +#define CFG_PCI_MEMORY_PHYS 0x00000000 +#define CFG_PCI_MEMORY_SIZE 0x80000000 + +#define CFG_PCI2_MEM_BASE 0xa0000000 +#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE +#define CFG_PCI2_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI2_IO_BASE 0xe3000000 +#define CFG_PCI2_IO_PHYS CFG_PCI2_IO_BASE +#define CFG_PCI2_IO_SIZE 0x1000000 /* 16M */ + +#if defined(CONFIG_PCI) + +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ + +#undef CFG_SCSI_SCAN_BUS_REVERSE + +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + +#undef CONFIG_EEPRO100 +#undef CONFIG_TULIP + +#if !defined(CONFIG_PCI_PNP) + #define PCI_ENET0_IOADDR 0xe0000000 + #define PCI_ENET0_MEMADDR 0xe0000000 + #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */ +#endif + +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ + +#define CONFIG_DOS_PARTITION +#undef CONFIG_SCSI_AHCI + +#ifdef CONFIG_SCSI_AHCI +#define CONFIG_SATA_ULI5288 +#define CFG_SCSI_MAX_SCSI_ID 4 +#define CFG_SCSI_MAX_LUN 1 +#define CFG_SCSI_MAX_DEVICE (CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN) +#define CFG_SCSI_MAXDEVICE CFG_SCSI_MAX_DEVICE +#endif + +#endif /* CONFIG_PCI */ + +#if defined(CONFIG_TSEC_ENET) + +#ifndef CONFIG_NET_MULTI +#define CONFIG_NET_MULTI 1 +#endif + +/* #define CONFIG_MII 1 */ /* MII PHY management */ + +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "eTSEC1" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "eTSEC2" +#define CONFIG_TSEC3 1 +#define CONFIG_TSEC3_NAME "eTSEC3" +#define CONFIG_TSEC4 1 +#define CONFIG_TSEC4_NAME "eTSEC4" + +#define TSEC1_PHY_ADDR 0x1F +#define TSEC2_PHY_ADDR 0x00 +#define TSEC3_PHY_ADDR 0x01 +#define TSEC4_PHY_ADDR 0x02 +#define TSEC1_PHYIDX 0 +#define TSEC2_PHYIDX 0 +#define TSEC3_PHYIDX 0 +#define TSEC4_PHYIDX 0 + +#define CFG_TBIPA_VALUE 0x1e /* Set TBI address not to conflict with TSEC1_PHY_ADDR */ + +#define CONFIG_ETHPRIME "eTSEC1" + +#endif /* CONFIG_TSEC_ENET */ + +/* + * BAT0 2G Cacheable, non-guarded + * 0x0000_0000 2G DDR + */ +#define CFG_DBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE) +#define CFG_DBAT0U (BATU_BL_2G | BATU_VS | BATU_VP) +#define CFG_IBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE ) +#define CFG_IBAT0U CFG_DBAT0U + +/* + * BAT1 1G Cache-inhibited, guarded + * 0x8000_0000 512M PCI-Express 1 Memory + * 0xa000_0000 512M PCI-Express 2 Memory + * Changed it for operating from 0xd0000000 + */ +#define CFG_DBAT1L ( CFG_PCI1_MEM_BASE | BATL_PP_RW \ + | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT1U CFG_DBAT1U + +/* + * BAT2 512M Cache-inhibited, guarded + * 0xc000_0000 512M RapidIO Memory + */ +#define CFG_DBAT2L (CFG_RIO_MEM_BASE | BATL_PP_RW \ + | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT2U (CFG_RIO_MEM_BASE | BATU_BL_512M | BATU_VS | BATU_VP) +#define CFG_IBAT2L (CFG_RIO_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT2U CFG_DBAT2U + +/* + * BAT3 4M Cache-inhibited, guarded + * 0xf800_0000 4M CCSR + */ +#define CFG_DBAT3L ( CFG_CCSRBAR | BATL_PP_RW \ + | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT3U (CFG_CCSRBAR | BATU_BL_4M | BATU_VS | BATU_VP) +#define CFG_IBAT3L (CFG_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT3U CFG_DBAT3U + +/* + * BAT4 32M Cache-inhibited, guarded + * 0xe200_0000 16M PCI-Express 1 I/O + * 0xe300_0000 16M PCI-Express 2 I/0 + * Note that this is at 0xe0000000 + */ +#define CFG_DBAT4L ( CFG_PCI1_IO_BASE | BATL_PP_RW \ + | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT4U (CFG_PCI1_IO_BASE | BATU_BL_32M | BATU_VS | BATU_VP) +#define CFG_IBAT4L (CFG_PCI1_IO_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT4U CFG_DBAT4U + +/* + * BAT5 128K Cacheable, non-guarded + * 0xe401_0000 128K Init RAM for stack in the CPU DCache (no backing memory) + */ +#define CFG_DBAT5L (CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE) +#define CFG_DBAT5U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) +#define CFG_IBAT5L CFG_DBAT5L +#define CFG_IBAT5U CFG_DBAT5U + +/* + * BAT6 32M Cache-inhibited, guarded + * 0xfe00_0000 32M FLASH + */ +#define CFG_DBAT6L ((CFG_FLASH_BASE & 0xfe000000) | BATL_PP_RW \ + | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT6U ((CFG_FLASH_BASE & 0xfe000000) | BATU_BL_32M | BATU_VS | BATU_VP) +#define CFG_IBAT6L ((CFG_FLASH_BASE & 0xfe000000) | BATL_PP_RW | BATL_MEMCOHERENCE) +#define CFG_IBAT6U CFG_DBAT6U + +#define CFG_DBAT7L 0x00000000 +#define CFG_DBAT7U 0x00000000 +#define CFG_IBAT7L 0x00000000 +#define CFG_IBAT7U 0x00000000 + +/* + * Environment + */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) +#define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ +#define CFG_ENV_SIZE 0x2000 + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#include + #define CONFIG_CMD_PING + #define CONFIG_CMD_I2C + +#if defined(CONFIG_PCI) + #define CONFIG_CMD_PCI +#endif + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LOAD_ADDR 0x2000000 /* default load address */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else + #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ + +/* Cache Configuration */ +#define CFG_DCACHE_SIZE 32768 +#define CFG_CACHELINE_SIZE 32 +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ + +/* The mac addresses for all ethernet interface */ +#if defined(CONFIG_TSEC_ENET) +#define CONFIG_ETHADDR 02:E0:0C:00:00:01 +#define CONFIG_ETH1ADDR 02:E0:0C:00:01:FD +#define CONFIG_ETH2ADDR 02:E0:0C:00:02:FD +#define CONFIG_ETH3ADDR 02:E0:0C:00:03:FD +#endif + +#define CONFIG_HAS_ETH1 1 +#define CONFIG_HAS_ETH2 1 +#define CONFIG_HAS_ETH3 1 + +#define CONFIG_IPADDR 192.168.0.50 + +#define CONFIG_HOSTNAME sbc8641d +#define CONFIG_ROOTPATH /opt/eldk/ppc_74xx +#define CONFIG_BOOTFILE uImage + +#define CONFIG_SERVERIP 192.168.0.2 +#define CONFIG_GATEWAYIP 192.168.0.1 +#define CONFIG_NETMASK 255.255.255.0 + +/* default location for tftp and bootm */ +#define CONFIG_LOADADDR 1000000 + +#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ +#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=uRamdisk\0" \ + "dtbaddr=400000\0" \ + "dtbfile=sbc8641d.dtb\0" \ + "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \ + "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \ + "maxcpus=1" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $dtbaddr $dtbfile;" \ + "bootm $loadaddr - $dtbaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $dtbaddr $dtbfile;" \ + "bootm $loadaddr $ramdiskaddr $dtbaddr" + +#define CONFIG_FLASHBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "bootm ffd00000 ffb00000 ffa00000" + +#define CONFIG_BOOTCOMMAND CONFIG_FLASHBOOTCOMMAND + +#endif /* __CONFIG_H */ -- cgit v1.3.1 From da9d4610d76e52c4d20a8f3d8433439a7fcf5b71 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Tue, 14 Aug 2007 00:14:25 -0500 Subject: Add support for UEC to 8568 Signed-off-by: Haiying Wang Signed-off-by: Andy Fleming --- Makefile | 3 ++ board/mpc8568mds/bcsr.c | 7 ++++ board/mpc8568mds/bcsr.h | 1 + board/mpc8568mds/mpc8568mds.c | 61 ++++++++++++++++++++++++++++++- cpu/mpc85xx/Makefile | 2 +- cpu/mpc85xx/cpu.c | 24 +++++++++++- cpu/mpc85xx/cpu_init.c | 33 +++++++++++++++++ cpu/mpc85xx/qe_io.c | 85 +++++++++++++++++++++++++++++++++++++++++++ drivers/qe/uec.c | 27 +++++++++----- drivers/qe/uec.h | 1 + drivers/qe/uec_phy.c | 14 +++---- drivers/qe/uec_phy.h | 6 +-- include/asm-ppc/global_data.h | 8 ++-- include/asm-ppc/immap_qe.h | 20 +++++++++- include/configs/MPC8568MDS.h | 56 ++++++++++++++++++++++++---- 15 files changed, 313 insertions(+), 35 deletions(-) create mode 100644 cpu/mpc85xx/qe_io.c (limited to 'Makefile') diff --git a/Makefile b/Makefile index f51688961b3..a5698cf7c95 100644 --- a/Makefile +++ b/Makefile @@ -212,6 +212,9 @@ LIBS += drivers/nand_legacy/libnand_legacy.a ifeq ($(CPU),mpc83xx) LIBS += drivers/qe/qe.a endif +ifeq ($(CPU),mpc85xx) +LIBS += drivers/qe/qe.a +endif LIBS += drivers/sk98lin/libsk98lin.a LIBS += post/libpost.a post/drivers/libpostdrivers.a LIBS += $(shell if [ -d post/lib_$(ARCH) ]; then echo \ diff --git a/board/mpc8568mds/bcsr.c b/board/mpc8568mds/bcsr.c index 2e2e8cd18fa..aae0f98e038 100644 --- a/board/mpc8568mds/bcsr.c +++ b/board/mpc8568mds/bcsr.c @@ -47,3 +47,10 @@ void disable_8568mds_flash_write() bcsr[9] &= ~(0x01); } + +void enable_8568mds_qe_mdio() +{ + u8 *bcsr = (u8 *)(CFG_BCSR); + + bcsr[7] |= 0x01; +} diff --git a/board/mpc8568mds/bcsr.h b/board/mpc8568mds/bcsr.h index 8d4cb2f1412..aefd9bf54d3 100644 --- a/board/mpc8568mds/bcsr.h +++ b/board/mpc8568mds/bcsr.h @@ -95,5 +95,6 @@ void enable_8568mds_duart(void); void enable_8568mds_flash_write(void); void disable_8568mds_flash_write(void); +void enable_8568mds_qe_mdio(void); #endif /* __BCSR_H_ */ diff --git a/board/mpc8568mds/mpc8568mds.c b/board/mpc8568mds/mpc8568mds.c index 23caaec72f2..818ff138a99 100644 --- a/board/mpc8568mds/mpc8568mds.c +++ b/board/mpc8568mds/mpc8568mds.c @@ -28,9 +28,65 @@ #include #include #include +#include #include "bcsr.h" +const qe_iop_conf_t qe_iop_conf_tab[] = { + /* GETH1 */ + {4, 10, 1, 0, 2}, /* TxD0 */ + {4, 9, 1, 0, 2}, /* TxD1 */ + {4, 8, 1, 0, 2}, /* TxD2 */ + {4, 7, 1, 0, 2}, /* TxD3 */ + {4, 23, 1, 0, 2}, /* TxD4 */ + {4, 22, 1, 0, 2}, /* TxD5 */ + {4, 21, 1, 0, 2}, /* TxD6 */ + {4, 20, 1, 0, 2}, /* TxD7 */ + {4, 15, 2, 0, 2}, /* RxD0 */ + {4, 14, 2, 0, 2}, /* RxD1 */ + {4, 13, 2, 0, 2}, /* RxD2 */ + {4, 12, 2, 0, 2}, /* RxD3 */ + {4, 29, 2, 0, 2}, /* RxD4 */ + {4, 28, 2, 0, 2}, /* RxD5 */ + {4, 27, 2, 0, 2}, /* RxD6 */ + {4, 26, 2, 0, 2}, /* RxD7 */ + {4, 11, 1, 0, 2}, /* TX_EN */ + {4, 24, 1, 0, 2}, /* TX_ER */ + {4, 16, 2, 0, 2}, /* RX_DV */ + {4, 30, 2, 0, 2}, /* RX_ER */ + {4, 17, 2, 0, 2}, /* RX_CLK */ + {4, 19, 1, 0, 2}, /* GTX_CLK */ + {1, 31, 2, 0, 3}, /* GTX125 */ + + /* GETH2 */ + {5, 10, 1, 0, 2}, /* TxD0 */ + {5, 9, 1, 0, 2}, /* TxD1 */ + {5, 8, 1, 0, 2}, /* TxD2 */ + {5, 7, 1, 0, 2}, /* TxD3 */ + {5, 23, 1, 0, 2}, /* TxD4 */ + {5, 22, 1, 0, 2}, /* TxD5 */ + {5, 21, 1, 0, 2}, /* TxD6 */ + {5, 20, 1, 0, 2}, /* TxD7 */ + {5, 15, 2, 0, 2}, /* RxD0 */ + {5, 14, 2, 0, 2}, /* RxD1 */ + {5, 13, 2, 0, 2}, /* RxD2 */ + {5, 12, 2, 0, 2}, /* RxD3 */ + {5, 29, 2, 0, 2}, /* RxD4 */ + {5, 28, 2, 0, 2}, /* RxD5 */ + {5, 27, 2, 0, 3}, /* RxD6 */ + {5, 26, 2, 0, 2}, /* RxD7 */ + {5, 11, 1, 0, 2}, /* TX_EN */ + {5, 24, 1, 0, 2}, /* TX_ER */ + {5, 16, 2, 0, 2}, /* RX_DV */ + {5, 30, 2, 0, 2}, /* RX_ER */ + {5, 17, 2, 0, 2}, /* RX_CLK */ + {5, 19, 1, 0, 2}, /* GTX_CLK */ + {1, 31, 2, 0, 3}, /* GTX125 */ + {4, 6, 3, 0, 2}, /* MDIO */ + {4, 5, 1, 0, 2}, /* MDC */ + {0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */ +}; + #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) extern void ddr_enable_ecc(unsigned int dram_size); @@ -50,6 +106,9 @@ int board_early_init_f (void) enable_8568mds_duart(); enable_8568mds_flash_write(); +#if defined(CONFIG_QE) && !defined(CONFIG_eTSEC_MDIO_BUS) + enable_8568mds_qe_mdio(); +#endif #ifdef CFG_I2C2_OFFSET /* Enable I2C2_SCL and I2C2_SDA */ @@ -335,6 +394,6 @@ pci_init_board(void) { #ifdef CONFIG_PCI pib_init(); - pci_mpc85xx_init(&hose); + pci_mpc85xx_init(hose); #endif } diff --git a/cpu/mpc85xx/Makefile b/cpu/mpc85xx/Makefile index ff67dcdd353..32091fa4e1d 100644 --- a/cpu/mpc85xx/Makefile +++ b/cpu/mpc85xx/Makefile @@ -30,7 +30,7 @@ LIB = $(obj)lib$(CPU).a START = start.o resetvec.o COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o \ - pci.o serial_scc.o commproc.o ether_fcc.o spd_sdram.o + pci.o serial_scc.o commproc.o ether_fcc.o spd_sdram.o qe_io.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c index 1d791c9b9b3..08e04685f59 100644 --- a/cpu/mpc85xx/cpu.c +++ b/cpu/mpc85xx/cpu.c @@ -280,7 +280,7 @@ ft_cpu_setup(void *blob, bd_t *bd) if (p != NULL) *p = cpu_to_be32(clock); -#if defined(CONFIG_TSEC1) +#if defined(CONFIG_HAS_ETH0) p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/mac-address", &len); if (p) memcpy(p, bd->bi_enetaddr, 6); @@ -308,6 +308,17 @@ ft_cpu_setup(void *blob, bd_t *bd) p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/local-mac-address", &len); if (p) memcpy(p, bd->bi_enet2addr, 6); + +#ifdef CONFIG_UEC_ETH + p = ft_get_prop(blob, "/" OF_QE "/ucc@2000/mac-address", &len); + if (p) + memcpy(p, bd->bi_enet2addr, 6); + + p = ft_get_prop(blob, "/" OF_QE "/ucc@2000/local-mac-address", &len); + if (p) + memcpy(p, bd->bi_enet2addr, 6); + +#endif #endif #if defined(CONFIG_HAS_ETH3) @@ -318,6 +329,17 @@ ft_cpu_setup(void *blob, bd_t *bd) p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/local-mac-address", &len); if (p) memcpy(p, bd->bi_enet3addr, 6); + +#ifdef CONFIG_UEC_ETH + p = ft_get_prop(blob, "/" OF_QE "/ucc@3000/mac-address", &len); + if (p) + memcpy(p, bd->bi_enet3addr, 6); + + p = ft_get_prop(blob, "/" OF_QE "/ucc@3000/local-mac-address", &len); + if (p) + memcpy(p, bd->bi_enet3addr, 6); + +#endif #endif } diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c index c7fe130ee0e..7b9961013c0 100644 --- a/cpu/mpc85xx/cpu_init.c +++ b/cpu/mpc85xx/cpu_init.c @@ -34,6 +34,29 @@ DECLARE_GLOBAL_DATA_PTR; +#ifdef CONFIG_QE +extern qe_iop_conf_t qe_iop_conf_tab[]; +extern void qe_config_iopin(u8 port, u8 pin, int dir, + int open_drain, int assign); +extern void qe_init(uint qe_base); +extern void qe_reset(void); + +static void config_qe_ioports(void) +{ + u8 port, pin; + int dir, open_drain, assign; + int i; + + for (i = 0; qe_iop_conf_tab[i].assign != QE_IOP_TAB_END; i++) { + port = qe_iop_conf_tab[i].port; + pin = qe_iop_conf_tab[i].pin; + dir = qe_iop_conf_tab[i].dir; + open_drain = qe_iop_conf_tab[i].open_drain; + assign = qe_iop_conf_tab[i].assign; + qe_config_iopin(port, pin, dir, open_drain, assign); + } +} +#endif #ifdef CONFIG_CPM2 static void config_8560_ioports (volatile immap_t * immr) @@ -181,6 +204,11 @@ void cpu_init_f (void) #if defined(CONFIG_CPM2) m8560_cpm_reset(); #endif +#ifdef CONFIG_QE + /* Config QE ioports */ + config_qe_ioports(); +#endif + } @@ -262,6 +290,11 @@ int cpu_init_r(void) #else printf("L2 cache: disabled\n"); #endif +#ifdef CONFIG_QE + uint qe_base = CFG_IMMR + 0x00080000; /* QE immr base */ + qe_init(qe_base); + qe_reset(); +#endif return 0; } diff --git a/cpu/mpc85xx/qe_io.c b/cpu/mpc85xx/qe_io.c new file mode 100644 index 00000000000..8878bc53193 --- /dev/null +++ b/cpu/mpc85xx/qe_io.c @@ -0,0 +1,85 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * + * Dave Liu + * based on source code of Shlomi Gridish + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include "common.h" +#include "asm/errno.h" +#include "asm/io.h" +#include "asm/immap_85xx.h" + +#if defined(CONFIG_QE) +#define NUM_OF_PINS 32 +void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign) +{ + u32 pin_2bit_mask; + u32 pin_2bit_dir; + u32 pin_2bit_assign; + u32 pin_1bit_mask; + u32 tmp_val; + volatile immap_t *im = (volatile immap_t *)CFG_IMMR; + volatile par_io_t *par_io = (volatile par_io_t *) + &(im->im_gur.qe_par_io); + + /* Caculate pin location and 2bit mask and dir */ + pin_2bit_mask = (u32)(0x3 << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2)); + pin_2bit_dir = (u32)(dir << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2)); + + /* Setup the direction */ + tmp_val = (pin > (NUM_OF_PINS/2) - 1) ? \ + in_be32(&par_io[port].cpdir2) : + in_be32(&par_io[port].cpdir1); + + if (pin > (NUM_OF_PINS/2) -1) { + out_be32(&par_io[port].cpdir2, ~pin_2bit_mask & tmp_val); + out_be32(&par_io[port].cpdir2, pin_2bit_dir | tmp_val); + } else { + out_be32(&par_io[port].cpdir1, ~pin_2bit_mask & tmp_val); + out_be32(&par_io[port].cpdir1, pin_2bit_dir | tmp_val); + } + + /* Calculate pin location for 1bit mask */ + pin_1bit_mask = (u32)(1 << (NUM_OF_PINS - (pin+1))); + + /* Setup the open drain */ + tmp_val = in_be32(&par_io[port].cpodr); + if (open_drain) + out_be32(&par_io[port].cpodr, pin_1bit_mask | tmp_val); + else + out_be32(&par_io[port].cpodr, ~pin_1bit_mask & tmp_val); + + /* Setup the assignment */ + tmp_val = (pin > (NUM_OF_PINS/2) - 1) ? + in_be32(&par_io[port].cppar2): + in_be32(&par_io[port].cppar1); + pin_2bit_assign = (u32)(assign + << (NUM_OF_PINS - (pin%(NUM_OF_PINS/2)+1)*2)); + + /* Clear and set 2 bits mask */ + if (pin > (NUM_OF_PINS/2) - 1) { + out_be32(&par_io[port].cppar2, ~pin_2bit_mask & tmp_val); + out_be32(&par_io[port].cppar2, pin_2bit_assign | tmp_val); + } else { + out_be32(&par_io[port].cppar1, ~pin_2bit_mask & tmp_val); + out_be32(&par_io[port].cppar1, pin_2bit_assign | tmp_val); + } +} + +#endif /* CONFIG_QE */ diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c index c416a67c832..89a72798232 100644 --- a/drivers/qe/uec.c +++ b/drivers/qe/uec.c @@ -391,17 +391,17 @@ static int uec_set_mac_if_mode(uec_private_t *uec, enet_interface_e if_mode) return 0; } -static int init_mii_management_configuration(uec_t *uec_regs) +static int init_mii_management_configuration(uec_mii_t *uec_mii_regs) { uint timeout = 0x1000; u32 miimcfg = 0; - miimcfg = in_be32(&uec_regs->miimcfg); + miimcfg = in_be32(&uec_mii_regs->miimcfg); miimcfg |= MIIMCFG_MNGMNT_CLC_DIV_INIT_VALUE; - out_be32(&uec_regs->miimcfg, miimcfg); + out_be32(&uec_mii_regs->miimcfg, miimcfg); /* Wait until the bus is free */ - while ((in_be32(&uec_regs->miimcfg) & MIIMIND_BUSY) && timeout--); + while ((in_be32(&uec_mii_regs->miimcfg) & MIIMIND_BUSY) && timeout--); if (timeout <= 0) { printf("%s: The MII Bus is stuck!", __FUNCTION__); return -ETIMEDOUT; @@ -413,13 +413,13 @@ static int init_mii_management_configuration(uec_t *uec_regs) static int init_phy(struct eth_device *dev) { uec_private_t *uec; - uec_t *uec_regs; + uec_mii_t *umii_regs; struct uec_mii_info *mii_info; struct phy_info *curphy; int err; uec = (uec_private_t *)dev->priv; - uec_regs = uec->uec_regs; + umii_regs = uec->uec_mii_regs; uec->oldlink = 0; uec->oldspeed = 0; @@ -451,19 +451,19 @@ static int init_phy(struct eth_device *dev) mii_info->mii_id = uec->uec_info->phy_address; mii_info->dev = dev; - mii_info->mdio_read = &read_phy_reg; - mii_info->mdio_write = &write_phy_reg; + mii_info->mdio_read = &uec_read_phy_reg; + mii_info->mdio_write = &uec_write_phy_reg; uec->mii_info = mii_info; - if (init_mii_management_configuration(uec_regs)) { + if (init_mii_management_configuration(umii_regs)) { printf("%s: The MII Bus is stuck!", dev->name); err = -1; goto bus_fail; } /* get info for this PHY */ - curphy = get_phy_info(uec->mii_info); + curphy = uec_get_phy_info(uec->mii_info); if (!curphy) { printf("%s: No PHY found", dev->name); err = -1; @@ -989,6 +989,13 @@ static int uec_startup(uec_private_t *uec) /* Setup MAC interface mode */ uec_set_mac_if_mode(uec, uec_info->enet_interface); + /* Setup MII management base */ +#ifndef CONFIG_eTSEC_MDIO_BUS + uec->uec_mii_regs = (uec_mii_t *)(&uec_regs->miimcfg); +#else + uec->uec_mii_regs = (uec_mii_t *) CONFIG_MIIM_ADDRESS; +#endif + /* Setup MII master clock source */ qe_set_mii_clk_src(uec_info->uf_info.ucc_num); diff --git a/drivers/qe/uec.h b/drivers/qe/uec.h index 04950264b89..c384055cebf 100644 --- a/drivers/qe/uec.h +++ b/drivers/qe/uec.h @@ -675,6 +675,7 @@ typedef struct uec_private { ucc_fast_private_t *uccf; struct eth_device *dev; uec_t *uec_regs; + uec_mii_t *uec_mii_regs; /* enet init command parameter */ uec_init_cmd_pram_t *p_init_enet_param; u32 init_enet_param_offset; diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c index 76fd38896a8..ca6faa6ef4e 100644 --- a/drivers/qe/uec_phy.c +++ b/drivers/qe/uec_phy.c @@ -60,14 +60,14 @@ void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val); /* Write value to the PHY for this device to the register at regnum, */ /* waiting until the write is done before it returns. All PHY */ /* configuration has to be done through the TSEC1 MIIM regs */ -void write_phy_reg (struct eth_device *dev, int mii_id, int regnum, int value) +void uec_write_phy_reg (struct eth_device *dev, int mii_id, int regnum, int value) { uec_private_t *ugeth = (uec_private_t *) dev->priv; - uec_t *ug_regs; + uec_mii_t *ug_regs; enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e) regnum; u32 tmp_reg; - ug_regs = ugeth->uec_regs; + ug_regs = ugeth->uec_mii_regs; /* Stop the MII management read cycle */ out_be32 (&ug_regs->miimcom, 0); @@ -87,15 +87,15 @@ void write_phy_reg (struct eth_device *dev, int mii_id, int regnum, int value) /* Reads from register regnum in the PHY for device dev, */ /* returning the value. Clears miimcom first. All PHY */ /* configuration has to be done through the TSEC1 MIIM regs */ -int read_phy_reg (struct eth_device *dev, int mii_id, int regnum) +int uec_read_phy_reg (struct eth_device *dev, int mii_id, int regnum) { uec_private_t *ugeth = (uec_private_t *) dev->priv; - uec_t *ug_regs; + uec_mii_t *ug_regs; enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e) regnum; u32 tmp_reg; u16 value; - ug_regs = ugeth->uec_regs; + ug_regs = ugeth->uec_mii_regs; /* Setting up the MII Mangement Address Register */ tmp_reg = ((u32) mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg; @@ -521,7 +521,7 @@ void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val) /* Use the PHY ID registers to determine what type of PHY is attached * to device dev. return a struct phy_info structure describing that PHY */ -struct phy_info *get_phy_info (struct uec_mii_info *mii_info) +struct phy_info *uec_get_phy_info (struct uec_mii_info *mii_info) { u16 phy_reg; u32 phy_ID; diff --git a/drivers/qe/uec_phy.h b/drivers/qe/uec_phy.h index 9bd926ddd5a..e59a940e0dd 100644 --- a/drivers/qe/uec_phy.h +++ b/drivers/qe/uec_phy.h @@ -249,10 +249,10 @@ struct phy_info { void (*close) (struct uec_mii_info * mii_info); }; -struct phy_info *get_phy_info (struct uec_mii_info *mii_info); -void write_phy_reg (struct eth_device *dev, int mii_id, int regnum, +struct phy_info *uec_get_phy_info (struct uec_mii_info *mii_info); +void uec_write_phy_reg (struct eth_device *dev, int mii_id, int regnum, int value); -int read_phy_reg (struct eth_device *dev, int mii_id, int regnum); +int uec_read_phy_reg (struct eth_device *dev, int mii_id, int regnum); void mii_clear_phy_interrupt (struct uec_mii_info *mii_info); void mii_configure_phy_interrupt (struct uec_mii_info *mii_info, u32 interrupts); diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h index bbaeb3f575f..1f1583a9231 100644 --- a/include/asm-ppc/global_data.h +++ b/include/asm-ppc/global_data.h @@ -71,16 +71,16 @@ typedef struct global_data { u32 lclk_clk; u32 ddr_clk; u32 pci_clk; +#if defined(CONFIG_MPC8360) + u32 ddr_sec_clk; +#endif /* CONFIG_MPC8360 */ +#endif #if defined(CONFIG_QE) u32 qe_clk; u32 brg_clk; uint mp_alloc_base; uint mp_alloc_top; #endif /* CONFIG_QE */ -#if defined (CONFIG_MPC8360) - u32 ddr_sec_clk; -#endif /* CONFIG_MPC8360 */ -#endif #if defined(CONFIG_MPC5xxx) unsigned long ipb_clk; unsigned long pci_clk; diff --git a/include/asm-ppc/immap_qe.h b/include/asm-ppc/immap_qe.h index 950b9497f8a..a16a6d3fc5f 100644 --- a/include/asm-ppc/immap_qe.h +++ b/include/asm-ppc/immap_qe.h @@ -281,6 +281,17 @@ typedef struct ucc_slow { u8 res4[0x200 - 0x091]; } __attribute__ ((packed)) ucc_slow_t; +typedef struct ucc_mii_mng { + u32 miimcfg; /* MII management configuration reg */ + u32 miimcom; /* MII management command reg */ + u32 miimadd; /* MII management address reg */ + u32 miimcon; /* MII management control reg */ + u32 miimstat; /* MII management status reg */ + u32 miimind; /* MII management indication reg */ + u32 ifctl; /* interface control reg */ + u32 ifstat; /* interface statux reg */ +} __attribute__ ((packed))uec_mii_t; + typedef struct ucc_ethernet { u32 maccfg1; /* mac configuration reg. 1 */ u32 maccfg2; /* mac configuration reg. 2 */ @@ -540,14 +551,21 @@ typedef struct qe_immap { u8 res14[0x300]; u8 res15[0x3A00]; u8 res16[0x8000]; /* 0x108000 - 0x110000 */ +#if defined(CONFIG_MPC8568) + u8 muram[0x10000]; /* 0x1_0000 - 0x2_0000 Multi-user RAM */ + u8 res17[0x20000]; /* 0x2_0000 - 0x4_0000 */ +#else u8 muram[0xC000]; /* 0x110000 - 0x11C000 Multi-user RAM */ u8 res17[0x24000]; /* 0x11C000 - 0x140000 */ u8 res18[0xC0000]; /* 0x140000 - 0x200000 */ +#endif } __attribute__ ((packed)) qe_map_t; extern qe_map_t *qe_immr; -#if defined(CONFIG_MPC8360) +#if defined(CONFIG_MPC8568) +#define QE_MURAM_SIZE 0x10000UL +#elif defined(CONFIG_MPC8360) #define QE_MURAM_SIZE 0xc000UL #elif defined(CONFIG_MPC832X) #define QE_MURAM_SIZE 0x4000UL diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 5bc953adc42..dc9cb1ff545 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -28,20 +28,21 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ -#define CONFIG_E500 1 /* BOOKE e500 family */ +#define CONFIG_E500 1 /* BOOKE e500 family */ #define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48/68 */ #define CONFIG_MPC8568 1 /* MPC8568 specific */ #define CONFIG_MPC8568MDS 1 /* MPC8568MDS board specific */ #define CONFIG_PCI #define CONFIG_TSEC_ENET /* tsec ethernet support */ +#undef CONFIG_QE /* Enable QE */ #define CONFIG_ENV_OVERWRITE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #define CONFIG_DDR_DLL /* possible DLL fix needed */ /*#define CONFIG_DDR_2T_TIMING Sets the 2T timing bit */ /*#define CONFIG_DDR_ECC*/ /* only for ECC DDR module */ -/*#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER*/ /* DDR controller or DMA? */ +/*#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER*/ /* DDR controller or DMA? */ #define CONFIG_MEM_INIT_VALUE 0xDeadBeef @@ -297,6 +298,7 @@ extern unsigned long get_clock_freq(void); #define OF_CPU "PowerPC,8568@0" #define OF_SOC "soc8568@e0000000" +#define OF_QE "qe@e0080000" #define OF_TBCLK (bd->bi_busfreq / 8) #define OF_STDOUT_PATH "/soc8568@e0000000/serial@4600" @@ -311,7 +313,7 @@ extern unsigned long get_clock_freq(void); #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_EEPROM_ADDR 0x52 #define CFG_I2C_SLAVE 0x7F -#define CFG_I2C_NOPROBES {0,0x69} /* Don't probe these addrs */ +#define CFG_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */ #define CFG_I2C_OFFSET 0x3000 #define CFG_I2C2_OFFSET 0x3100 @@ -340,6 +342,44 @@ extern unsigned long get_clock_freq(void); #define CONFIG_NET_MULTI #define CONFIG_PCI_PNP /* do pci plug-and-play */ +#ifdef CONFIG_QE +/* + * QE UEC ethernet configuration + */ +#define CONFIG_UEC_ETH +#ifndef CONFIG_TSEC_ENET +#define CONFIG_ETHPRIME "Freescale GETH" +#endif +#define CONFIG_PHY_MODE_NEED_CHANGE +#define CONFIG_eTSEC_MDIO_BUS + +#ifdef CONFIG_eTSEC_MDIO_BUS +#define CONFIG_MIIM_ADDRESS 0xE0024520 +#endif + +#define CONFIG_UEC_ETH1 /* GETH1 */ + +#ifdef CONFIG_UEC_ETH1 +#define CFG_UEC1_UCC_NUM 0 /* UCC1 */ +#define CFG_UEC1_RX_CLK QE_CLK_NONE +#define CFG_UEC1_TX_CLK QE_CLK16 +#define CFG_UEC1_ETH_TYPE GIGA_ETH +#define CFG_UEC1_PHY_ADDR 7 +#define CFG_UEC1_INTERFACE_MODE ENET_1000_GMII +#endif + +#define CONFIG_UEC_ETH2 /* GETH2 */ + +#ifdef CONFIG_UEC_ETH2 +#define CFG_UEC2_UCC_NUM 1 /* UCC2 */ +#define CFG_UEC2_RX_CLK QE_CLK_NONE +#define CFG_UEC2_TX_CLK QE_CLK16 +#define CFG_UEC2_ETH_TYPE GIGA_ETH +#define CFG_UEC2_PHY_ADDR 1 +#define CFG_UEC2_INTERFACE_MODE ENET_1000_GMII +#endif +#endif /* CONFIG_QE */ + #undef CONFIG_EEPRO100 #undef CONFIG_TULIP @@ -348,13 +388,12 @@ extern unsigned long get_clock_freq(void); #endif /* CONFIG_PCI */ - -#if defined(CONFIG_TSEC_ENET) - #ifndef CONFIG_NET_MULTI #define CONFIG_NET_MULTI 1 #endif +#if defined(CONFIG_TSEC_ENET) + #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_TSEC1 1 #define CONFIG_TSEC1_NAME "eTSEC0" @@ -460,12 +499,15 @@ extern unsigned long get_clock_freq(void); */ /* The mac addresses for all ethernet interface */ -#if defined(CONFIG_TSEC_ENET) +#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_UEC_ETH) +#define CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:E0:0C:00:00:FD #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD #define CONFIG_HAS_ETH2 #define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD +#define CONFIG_HAS_ETH3 +#define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD #endif #define CONFIG_IPADDR 192.168.1.253 -- cgit v1.3.1 From 7f3f2bd2dc08e0b05e185662ca2e2d283757104a Mon Sep 17 00:00:00 2001 From: Randy Vinson Date: Tue, 27 Feb 2007 19:42:22 -0700 Subject: 85xxCDS: Add make targets for legacy systems. The PCI ID select values on the Arcadia main board differ depending on the version of the hardware. The standard configuration supports Rev 3.1. The legacy target supports Rev 2.x. Signed-off-by Randy Vinson --- Makefile | 27 ++++++++++++++++++++++++--- board/cds/common/via.c | 2 +- board/cds/mpc8541cds/mpc8541cds.c | 15 +++++++++------ board/cds/mpc8548cds/mpc8548cds.c | 15 +++++++++------ board/cds/mpc8555cds/mpc8555cds.c | 15 +++++++++------ cpu/mpc85xx/pci.c | 2 +- include/configs/MPC8541CDS.h | 7 +++++++ include/configs/MPC8548CDS.h | 8 ++++++++ include/configs/MPC8555CDS.h | 7 +++++++ 9 files changed, 75 insertions(+), 23 deletions(-) (limited to 'Makefile') diff --git a/Makefile b/Makefile index a5698cf7c95..95e9e369a5f 100644 --- a/Makefile +++ b/Makefile @@ -1786,17 +1786,38 @@ MPC8540EVAL_66_slave_config: unconfig MPC8560ADS_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads +MPC8541CDS_legacy_config \ MPC8541CDS_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8541cds cds + @mkdir -p $(obj)include + @echo "" >$(obj)include/config.h ; \ + if [ "$(findstring _legacy_,$@)" ] ; then \ + echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ + echo "... legacy" ; \ + fi + @$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds cds MPC8544DS_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8544ds freescale +MPC8548CDS_legacy_config \ MPC8548CDS_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8548cds cds + @mkdir -p $(obj)include + @echo "" >$(obj)include/config.h ; \ + if [ "$(findstring _legacy_,$@)" ] ; then \ + echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ + echo "... legacy" ; \ + fi + @$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds cds +MPC8555CDS_legacy_config \ MPC8555CDS_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8555cds cds + @mkdir -p $(obj)include + @echo "" >$(obj)include/config.h ; \ + if [ "$(findstring _legacy_,$@)" ] ; then \ + echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ + echo "... legacy" ; \ + fi + @$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds cds MPC8568MDS_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds diff --git a/board/cds/common/via.c b/board/cds/common/via.c index ded214f06f7..4a63d779440 100644 --- a/board/cds/common/via.c +++ b/board/cds/common/via.c @@ -45,7 +45,7 @@ void mpc85xx_config_via(struct pci_controller *hose, * This allows legacy I/O (i8259, etc) on the VIA * southbridge to be accessed. */ - bridge = PCI_BDF(0,17,0); + bridge = PCI_BDF(0,BRIDGE_ID,0); pci_hose_write_config_byte(hose, bridge, PCI_IO_BASE, 0); pci_hose_write_config_word(hose, bridge, PCI_IO_BASE_UPPER16, 0); pci_hose_write_config_byte(hose, bridge, PCI_IO_LIMIT, 0x10); diff --git a/board/cds/mpc8541cds/mpc8541cds.c b/board/cds/mpc8541cds/mpc8541cds.c index 41923248360..558ba9903ce 100644 --- a/board/cds/mpc8541cds/mpc8541cds.c +++ b/board/cds/mpc8541cds/mpc8541cds.c @@ -476,14 +476,17 @@ void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_ta static struct pci_config_table pci_mpc85xxcds_config_table[] = { {0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}}, - {0x1106, 0x0686, PCI_ANY_ID, 1, 2, 0, mpc85xx_config_via, {0,0,0}}, - {0x1106, 0x0571, PCI_ANY_ID, 1, 2, 1, + {0x1106, 0x0686, PCI_ANY_ID, 1, VIA_ID, 0, mpc85xx_config_via, {0,0,0}}, + {0x1106, 0x0571, PCI_ANY_ID, 1, VIA_ID, 1, mpc85xx_config_via_usbide, {0,0,0}}, - {0x1105, 0x3038, PCI_ANY_ID, 1, 2, 2, mpc85xx_config_via_usb, {0,0,0}}, - {0x1106, 0x3038, PCI_ANY_ID, 1, 2, 3, mpc85xx_config_via_usb2, {0,0,0}}, - {0x1106, 0x3058, PCI_ANY_ID, 1, 2, 5, + {0x1105, 0x3038, PCI_ANY_ID, 1, VIA_ID, 2, + mpc85xx_config_via_usb, {0,0,0}}, + {0x1106, 0x3038, PCI_ANY_ID, 1, VIA_ID, 3, + mpc85xx_config_via_usb2, {0,0,0}}, + {0x1106, 0x3058, PCI_ANY_ID, 1, VIA_ID, 5, mpc85xx_config_via_power, {0,0,0}}, - {0x1106, 0x3068, PCI_ANY_ID, 1, 2, 6, mpc85xx_config_via_ac97, {0,0,0}}, + {0x1106, 0x3068, PCI_ANY_ID, 1, VIA_ID, 6, + mpc85xx_config_via_ac97, {0,0,0}}, {}, }; diff --git a/board/cds/mpc8548cds/mpc8548cds.c b/board/cds/mpc8548cds/mpc8548cds.c index 242a68c391d..48753d7e241 100644 --- a/board/cds/mpc8548cds/mpc8548cds.c +++ b/board/cds/mpc8548cds/mpc8548cds.c @@ -299,14 +299,17 @@ void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_ta static struct pci_config_table pci_mpc85xxcds_config_table[] = { {0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}}, - {0x1106, 0x0686, PCI_ANY_ID, 1, 2, 0, mpc85xx_config_via, {0,0,0}}, - {0x1106, 0x0571, PCI_ANY_ID, 1, 2, 1, + {0x1106, 0x0686, PCI_ANY_ID, 1, VIA_ID, 0, mpc85xx_config_via, {0,0,0}}, + {0x1106, 0x0571, PCI_ANY_ID, 1, VIA_ID, 1, mpc85xx_config_via_usbide, {0,0,0}}, - {0x1105, 0x3038, PCI_ANY_ID, 1, 2, 2, mpc85xx_config_via_usb, {0,0,0}}, - {0x1106, 0x3038, PCI_ANY_ID, 1, 2, 3, mpc85xx_config_via_usb2, {0,0,0}}, - {0x1106, 0x3058, PCI_ANY_ID, 1, 2, 5, + {0x1105, 0x3038, PCI_ANY_ID, 1, VIA_ID, 2, + mpc85xx_config_via_usb, {0,0,0}}, + {0x1106, 0x3038, PCI_ANY_ID, 1, VIA_ID, 3, + mpc85xx_config_via_usb2, {0,0,0}}, + {0x1106, 0x3058, PCI_ANY_ID, 1, VIA_ID, 5, mpc85xx_config_via_power, {0,0,0}}, - {0x1106, 0x3068, PCI_ANY_ID, 1, 2, 6, mpc85xx_config_via_ac97, {0,0,0}}, + {0x1106, 0x3068, PCI_ANY_ID, 1, VIA_ID, 6, + mpc85xx_config_via_ac97, {0,0,0}}, {}, }; diff --git a/board/cds/mpc8555cds/mpc8555cds.c b/board/cds/mpc8555cds/mpc8555cds.c index 704bf03164a..8f1642187c1 100644 --- a/board/cds/mpc8555cds/mpc8555cds.c +++ b/board/cds/mpc8555cds/mpc8555cds.c @@ -473,14 +473,17 @@ void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_ta static struct pci_config_table pci_mpc85xxcds_config_table[] = { {0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}}, - {0x1106, 0x0686, PCI_ANY_ID, 1, 2, 0, mpc85xx_config_via, {0,0,0}}, - {0x1106, 0x0571, PCI_ANY_ID, 1, 2, 1, + {0x1106, 0x0686, PCI_ANY_ID, 1, VIA_ID, 0, mpc85xx_config_via, {0,0,0}}, + {0x1106, 0x0571, PCI_ANY_ID, 1, VIA_ID, 1, mpc85xx_config_via_usbide, {0,0,0}}, - {0x1105, 0x3038, PCI_ANY_ID, 1, 2, 2, mpc85xx_config_via_usb, {0,0,0}}, - {0x1106, 0x3038, PCI_ANY_ID, 1, 2, 3, mpc85xx_config_via_usb2, {0,0,0}}, - {0x1106, 0x3058, PCI_ANY_ID, 1, 2, 5, + {0x1105, 0x3038, PCI_ANY_ID, 1, VIA_ID, 2, + mpc85xx_config_via_usb, {0,0,0}}, + {0x1106, 0x3038, PCI_ANY_ID, 1, VIA_ID, 3, + mpc85xx_config_via_usb2, {0,0,0}}, + {0x1106, 0x3058, PCI_ANY_ID, 1, VIA_ID, 5, mpc85xx_config_via_power, {0,0,0}}, - {0x1106, 0x3068, PCI_ANY_ID, 1, 2, 6, mpc85xx_config_via_ac97, {0,0,0}}, + {0x1106, 0x3068, PCI_ANY_ID, 1, VIA_ID, 6, + mpc85xx_config_via_ac97, {0,0,0}}, {}, }; diff --git a/cpu/mpc85xx/pci.c b/cpu/mpc85xx/pci.c index 3c1a323aad2..db09e45fbcc 100644 --- a/cpu/mpc85xx/pci.c +++ b/cpu/mpc85xx/pci.c @@ -142,7 +142,7 @@ pci_mpc85xx_init(struct pci_controller *board_hose) u8 header_type; pci_hose_read_config_byte(hose, - PCI_BDF(0,17,0), + PCI_BDF(0,BRIDGE_ID,0), PCI_HEADER_TYPE, &header_type); } diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index 50d3b6b8727..232f1716bcc 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -350,6 +350,13 @@ extern unsigned long get_clock_freq(void); #define CFG_PCI2_IO_PHYS 0xe2100000 #define CFG_PCI2_IO_SIZE 0x100000 /* 1M */ +#ifdef CONFIG_LEGACY +#define BRIDGE_ID 17 +#define VIA_ID 2 +#else +#define BRIDGE_ID 28 +#define VIA_ID 4 +#endif #if defined(CONFIG_PCI) diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index dfe4f5b7a1b..cda9fd5c1c7 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -395,6 +395,14 @@ extern unsigned long get_clock_freq(void); #define CFG_RIO_MEM_SIZE 0x20000000 /* 512M */ #endif +#ifdef CONFIG_LEGACY +#define BRIDGE_ID 17 +#define VIA_ID 2 +#else +#define BRIDGE_ID 28 +#define VIA_ID 4 +#endif + #if defined(CONFIG_PCI) #define CONFIG_NET_MULTI diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index a3025bd7157..e8fe99aaf13 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -350,6 +350,13 @@ extern unsigned long get_clock_freq(void); #define CFG_PCI2_IO_PHYS 0xe2100000 #define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */ +#ifdef CONFIG_LEGACY +#define BRIDGE_ID 17 +#define VIA_ID 2 +#else +#define BRIDGE_ID 28 +#define VIA_ID 4 +#endif #if defined(CONFIG_PCI) -- cgit v1.3.1 From 779e975117a75e91fcebe226a63104dbfb924ab1 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 14 Aug 2007 14:44:41 +0200 Subject: ppc4xx: Add initial Zeus (PPC405EP) board support Signed-off-by: Stefan Roese --- MAINTAINERS | 1 + MAKEALL | 2 +- Makefile | 3 + board/amcc/bubinga/bubinga.c | 13 +- board/amcc/taihu/taihu.c | 6 + board/zeus/Makefile | 51 +++++ board/zeus/config.mk | 24 ++ board/zeus/u-boot.lds | 133 +++++++++++ board/zeus/update.c | 105 +++++++++ board/zeus/zeus.c | 511 +++++++++++++++++++++++++++++++++++++++++++ cpu/ppc4xx/sdram.c | 27 ++- cpu/ppc4xx/sdram.h | 2 - cpu/ppc4xx/start.S | 48 ++-- doc/README.zeus | 73 +++++++ include/configs/zeus.h | 375 +++++++++++++++++++++++++++++++ include/ppc405.h | 14 ++ 16 files changed, 1344 insertions(+), 44 deletions(-) create mode 100644 board/zeus/Makefile create mode 100644 board/zeus/config.mk create mode 100644 board/zeus/u-boot.lds create mode 100644 board/zeus/update.c create mode 100644 board/zeus/zeus.c create mode 100644 doc/README.zeus create mode 100644 include/configs/zeus.h (limited to 'Makefile') diff --git a/MAINTAINERS b/MAINTAINERS index 6dd43f86195..853afeb4d36 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -293,6 +293,7 @@ Stefan Roese walnut PPC405GP yellowstone PPC440GR yosemite PPC440EP + zeus PPC405EP P3M750 PPC750FX/GX/GL diff --git a/MAKEALL b/MAKEALL index f69134a63ea..00cb6b5351c 100755 --- a/MAKEALL +++ b/MAKEALL @@ -91,7 +91,7 @@ LIST_4xx=" \ sc3 sequoia sequoia_nand taihu \ taishan VOH405 VOM405 W7OLMC \ W7OLMG walnut WUH405 XPEDITE1K \ - yellowstone yosemite yucca \ + yellowstone yosemite yucca zeus \ " ######################################################################### diff --git a/Makefile b/Makefile index d4fd34e43f9..d75f8fdddb8 100644 --- a/Makefile +++ b/Makefile @@ -1294,6 +1294,9 @@ yellowstone_config: unconfig yucca_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx yucca amcc +zeus_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc ppc4xx zeus + ######################################################################### ## MPC8220 Systems ######################################################################### diff --git a/board/amcc/bubinga/bubinga.c b/board/amcc/bubinga/bubinga.c index fe6ce8a6d13..66e7509da89 100644 --- a/board/amcc/bubinga/bubinga.c +++ b/board/amcc/bubinga/bubinga.c @@ -20,10 +20,12 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ -long int spd_sdram(void); #include #include +#include + +long int spd_sdram(void); int board_early_init_f(void) { @@ -34,6 +36,15 @@ int board_early_init_f(void) mtdcr(uictr, 0x00000010); /* set int trigger levels */ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + /* + * Configure CPC0_PCI to enable PerWE as output + * and enable the internal PCI arbiter if selected + */ + if (in_8((void *)FPGA_REG1) & FPGA_REG1_PCI_INT_ARB) + mtdcr(cpc0_pci, CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN); + else + mtdcr(cpc0_pci, CPC0_PCI_HOST_CFG_EN); + return 0; } diff --git a/board/amcc/taihu/taihu.c b/board/amcc/taihu/taihu.c index ee9d3b5446f..ea83671988a 100644 --- a/board/amcc/taihu/taihu.c +++ b/board/amcc/taihu/taihu.c @@ -50,6 +50,12 @@ int board_early_init_f(void) mtebc(pb3ap, CFG_EBC_PB3AP); /* memory bank 3 (CPLD_LCM) initialization */ mtebc(pb3cr, CFG_EBC_PB3CR); + /* + * Configure CPC0_PCI to enable PerWE as output + * and enable the internal PCI arbiter + */ + mtdcr(cpc0_pci, CPC0_PCI_SPE | CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN); + return 0; } diff --git a/board/zeus/Makefile b/board/zeus/Makefile new file mode 100644 index 00000000000..f0d4e9f3f42 --- /dev/null +++ b/board/zeus/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2007 +# Stefan Roese, DENX Software Engineering, sr@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o update.o +SOBJS = + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/zeus/config.mk b/board/zeus/config.mk new file mode 100644 index 00000000000..1bdf5e4fcf3 --- /dev/null +++ b/board/zeus/config.mk @@ -0,0 +1,24 @@ +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0xFFFC0000 diff --git a/board/zeus/u-boot.lds b/board/zeus/u-boot.lds new file mode 100644 index 00000000000..73b83eba40e --- /dev/null +++ b/board/zeus/u-boot.lds @@ -0,0 +1,133 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + .resetvec 0xFFFFFFFC : + { + *(.resetvec) + } = 0xffff + + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/ppc4xx/start.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/zeus/update.c b/board/zeus/update.c new file mode 100644 index 00000000000..c76519f094f --- /dev/null +++ b/board/zeus/update.c @@ -0,0 +1,105 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +#if defined(CONFIG_ZEUS) + +u8 buf_zeus_ce[] = { +/*00 01 02 03 04 05 06 07 */ + 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +/*08 09 0a 0b 0c 0d 0e 0f */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +/*10 11 12 13 14 15 16 17 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +/*18 19 1a 1b 1c 1d 1e 1f */ + 0x00, 0xc0, 0x50, 0x12, 0x72, 0x3e, 0x00, 0x00 }; + +u8 buf_zeus_pe[] = { + +/* CPU_CLOCK_DIV 1 = 00 + CPU_PLB_FREQ_DIV 3 = 10 + OPB_PLB_FREQ_DIV 2 = 01 + EBC_PLB_FREQ_DIV 2 = 00 + MAL_PLB_FREQ_DIV 1 = 00 + PCI_PLB_FRQ_DIV 3 = 10 + PLL_PLLOUTA = IS SET + PLL_OPERATING = IS NOT SET + PLL_FDB_MUL 10 = 1010 + PLL_FWD_DIV_A 3 = 101 + PLL_FWD_DIV_B 3 = 101 + TUNE = 0x2be */ +/*00 01 02 03 04 05 06 07 */ + 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +/*08 09 0a 0b 0c 0d 0e 0f */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +/*10 11 12 13 14 15 16 17 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +/*18 19 1a 1b 1c 1d 1e 1f */ + 0x00, 0x60, 0x68, 0x2d, 0x42, 0xbe, 0x00, 0x00 }; + +static int update_boot_eeprom(void) +{ + u32 len = 0x20; + u8 chip = CFG_I2C_EEPROM_ADDR; + u8 *pbuf; + u8 base; + int i; + + if (in_be32((void *)GPIO0_IR) & GPIO_VAL(CFG_GPIO_ZEUS_PE)) { + pbuf = buf_zeus_pe; + base = 0x40; + } else { + pbuf = buf_zeus_ce; + base = 0x00; + } + + for (i = 0; i < len; i++, base++) { + if (i2c_write(chip, base, 1, &pbuf[i], 1) != 0) { + printf("i2c_write fail\n"); + return 1; + } + udelay(11000); + } + + return 0; +} + +int do_update_boot_eeprom(cmd_tbl_t* cmdtp, int flag, int argc, char* argv[]) +{ + return update_boot_eeprom(); +} + +U_BOOT_CMD ( + update_boot_eeprom, 1, 1, do_update_boot_eeprom, + "update_boot_eeprom - update boot eeprom content\n", + NULL +); + +#endif diff --git a/board/zeus/zeus.c b/board/zeus/zeus.c new file mode 100644 index 00000000000..4ab853f8f56 --- /dev/null +++ b/board/zeus/zeus.c @@ -0,0 +1,511 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#define REBOOT_MAGIC 0x07081967 +#define REBOOT_NOP 0x00000000 +#define REBOOT_DO_POST 0x00000001 + +extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ +extern env_t *env_ptr; +extern uchar default_environment[]; + +ulong flash_get_size(ulong base, int banknum); +void env_crc_update(void); +int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); + +static u32 start_time; + +int board_early_init_f(void) +{ + mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(uicer, 0x00000000); /* disable all ints */ + mtdcr(uiccr, 0x00000000); + mtdcr(uicpr, 0xFFFF7F00); /* set int polarities */ + mtdcr(uictr, 0x00000000); /* set int trigger levels */ + mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */ + + /* + * Configure CPC0_PCI to enable PerWE as output + */ + mtdcr(cpc0_pci, CPC0_PCI_SPE); + + return 0; +} + +int misc_init_r(void) +{ + u32 pbcr; + int size_val = 0; + u32 post_magic; + u32 post_val; + + post_magic = in_be32((void *)CFG_POST_MAGIC); + post_val = in_be32((void *)CFG_POST_VAL); + if ((post_magic == REBOOT_MAGIC) && (post_val == REBOOT_DO_POST)) { + /* + * Set special bootline bootparameter to pass this POST boot + * mode to Linux to reset the username/password + */ + setenv("addmisc", "setenv bootargs \\${bootargs} factory_reset=yes"); + + /* + * Normally don't run POST tests, only when enabled + * via the sw-reset button. So disable further tests + * upon next bootup here. + */ + out_be32((void *)CFG_POST_VAL, REBOOT_NOP); + } else { + /* + * Only run POST when initiated via the sw-reset button mechanism + */ + post_word_store(0); + } + + /* + * Get current time + */ + start_time = get_timer(0); + + /* + * FLASH stuff... + */ + + /* Re-do sizing to get full correct info */ + + /* adjust flash start and offset */ + mfebc(pb0cr, pbcr); + switch (gd->bd->bi_flashsize) { + case 1 << 20: + size_val = 0; + break; + case 2 << 20: + size_val = 1; + break; + case 4 << 20: + size_val = 2; + break; + case 8 << 20: + size_val = 3; + break; + case 16 << 20: + size_val = 4; + break; + case 32 << 20: + size_val = 5; + break; + case 64 << 20: + size_val = 6; + break; + case 128 << 20: + size_val = 7; + break; + } + pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17); + mtebc(pb0cr, pbcr); + + /* + * Re-check to get correct base address + */ + flash_get_size(gd->bd->bi_flashstart, 0); + + /* Monitor protection ON by default */ + (void)flash_protect(FLAG_PROTECT_SET, + -CFG_MONITOR_LEN, + 0xffffffff, + &flash_info[0]); + + /* Env protection ON by default */ + (void)flash_protect(FLAG_PROTECT_SET, + CFG_ENV_ADDR_REDUND, + CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1, + &flash_info[0]); + + return 0; +} + +/* + * Check Board Identity: + */ +int checkboard(void) +{ + char *s = getenv("serial#"); + + puts("Board: Zeus-"); + + if (in_be32((void *)GPIO0_IR) & GPIO_VAL(CFG_GPIO_ZEUS_PE)) + puts("PE"); + else + puts("CE"); + + puts(" of BulletEndPoint"); + + if (s != NULL) { + puts(", serial# "); + puts(s); + } + putc('\n'); + + /* both LED's off */ + gpio_write_bit(CFG_GPIO_LED_RED, 0); + gpio_write_bit(CFG_GPIO_LED_GREEN, 0); + udelay(10000); + /* and on again */ + gpio_write_bit(CFG_GPIO_LED_RED, 1); + gpio_write_bit(CFG_GPIO_LED_GREEN, 1); + + return (0); +} + +static u32 detect_sdram_size(void) +{ + u32 val; + u32 size; + + mfsdram(mem_mb0cf, val); + size = (4 << 20) << ((val & 0x000e0000) >> 17); + + /* + * Check if 2nd bank is enabled too + */ + mfsdram(mem_mb1cf, val); + if (val & 1) + size += (4 << 20) << ((val & 0x000e0000) >> 17); + + return size; +} + +long int initdram (int board_type) +{ + return detect_sdram_size(); +} + +#if defined(CFG_DRAM_TEST) +int testdram(void) +{ + unsigned long *mem = (unsigned long *)0; + const unsigned long kend = (1024 / sizeof(unsigned long)); + unsigned long k, n; + unsigned long msr; + unsigned long total_kbytes; + + total_kbytes = detect_sdram_size(); + + msr = mfmsr(); + mtmsr(msr & ~(MSR_EE)); + + for (k = 0; k < total_kbytes ; + ++k, mem += (1024 / sizeof(unsigned long))) { + if ((k & 1023) == 0) { + printf("%3d MB\r", k / 1024); + } + + memset(mem, 0xaaaaaaaa, 1024); + for (n = 0; n < kend; ++n) { + if (mem[n] != 0xaaaaaaaa) { + printf("SDRAM test fails at: %08x\n", + (uint) & mem[n]); + return 1; + } + } + + memset(mem, 0x55555555, 1024); + for (n = 0; n < kend; ++n) { + if (mem[n] != 0x55555555) { + printf("SDRAM test fails at: %08x\n", + (uint) & mem[n]); + return 1; + } + } + } + printf("SDRAM test passes\n"); + mtmsr(msr); + + return 0; +} +#endif + +static int default_env_var(char *buf, char *var) +{ + char *ptr; + char *val; + + /* + * Find env variable + */ + ptr = strstr(buf + 4, var); + if (ptr == NULL) { + printf("ERROR: %s not found!\n", var); + return -1; + } + ptr += strlen(var) + 1; + + /* + * Now the ethaddr needs to be updated in the "normal" + * environment storage -> redundant flash. + */ + val = ptr; + setenv(var, val); + printf("Updated %s from eeprom to %s!\n", var, val); + + return 0; +} + +static int restore_default(void) +{ + char *buf; + char *buf_save; + u32 crc; + + /* + * Unprotect and erase environment area + */ + flash_protect(FLAG_PROTECT_CLEAR, + CFG_ENV_ADDR_REDUND, + CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1, + &flash_info[0]); + + flash_sect_erase(CFG_ENV_ADDR_REDUND, + CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1); + + /* + * Now restore default environment from U-Boot image + * -> ipaddr, serverip... + */ + memset(env_ptr, 0, sizeof(env_t)); + memcpy(env_ptr->data, default_environment, ENV_SIZE); +#ifdef CFG_REDUNDAND_ENVIRONMENT + env_ptr->flags = 0xFF; +#endif + env_crc_update(); + gd->env_valid = 1; + + /* + * Read board specific values from I2C EEPROM + * and set env variables accordingly + * -> ethaddr, eth1addr, serial# + */ + buf = buf_save = malloc(FACTORY_RESET_ENV_SIZE); + if (eeprom_read(FACTORY_RESET_I2C_EEPROM, FACTORY_RESET_ENV_OFFS, + (u8 *)buf, FACTORY_RESET_ENV_SIZE)) { + puts("\nError reading EEPROM!\n"); + } else { + crc = crc32(0, (u8 *)(buf + 4), FACTORY_RESET_ENV_SIZE - 4); + if (crc != *(u32 *)buf) { + printf("ERROR: crc mismatch %08lx %08lx\n", crc, *(u32 *)buf); + return -1; + } + + default_env_var(buf, "ethaddr"); + buf += 8 + 18; + default_env_var(buf, "eth1addr"); + buf += 9 + 18; + default_env_var(buf, "serial#"); + } + + /* + * Finally save updated env variables back to flash + */ + saveenv(); + + free(buf_save); + + return 0; +} + +int do_set_default(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + char *buf; + char *buf_save; + char str[32]; + u32 crc; + char var[32]; + + if (argc < 4) { + puts("ERROR!\n"); + return -1; + } + + buf = buf_save = malloc(FACTORY_RESET_ENV_SIZE); + memset(buf, 0, FACTORY_RESET_ENV_SIZE); + + strcpy(var, "ethaddr"); + printf("Setting %s to %s\n", var, argv[1]); + sprintf(str, "%s=%s", var, argv[1]); + strcpy(buf + 4, str); + buf += strlen(str) + 1; + + strcpy(var, "eth1addr"); + printf("Setting %s to %s\n", var, argv[2]); + sprintf(str, "%s=%s", var, argv[2]); + strcpy(buf + 4, str); + buf += strlen(str) + 1; + + strcpy(var, "serial#"); + printf("Setting %s to %s\n", var, argv[3]); + sprintf(str, "%s=%s", var, argv[3]); + strcpy(buf + 4, str); + + crc = crc32(0, (u8 *)(buf_save + 4), FACTORY_RESET_ENV_SIZE - 4); + *(u32 *)buf_save = crc; + + if (eeprom_write(FACTORY_RESET_I2C_EEPROM, FACTORY_RESET_ENV_OFFS, + (u8 *)buf_save, FACTORY_RESET_ENV_SIZE)) { + puts("\nError writing EEPROM!\n"); + return -1; + } + + free(buf_save); + + return 0; +} + +U_BOOT_CMD( + setdef, 4, 1, do_set_default, + "setdef - write board-specific values to EEPROM (ethaddr...)\n", + "ethaddr eth1addr serial#\n - write board-specific values to EEPROM\n" + ); + +static inline int sw_reset_pressed(void) +{ + return !(in_be32((void *)GPIO0_IR) & GPIO_VAL(CFG_GPIO_SW_RESET)); +} + +int do_chkreset(cmd_tbl_t* cmdtp, int flag, int argc, char* argv[]) +{ + int delta; + int count = 0; + int post = 0; + int factory_reset = 0; + + if (!sw_reset_pressed()) { + printf("SW-Reset already high (Button released)\n"); + printf("-> No action taken!\n"); + return 0; + } + + printf("Waiting for SW-Reset button to be released."); + + while (1) { + delta = get_timer(start_time); + if (!sw_reset_pressed()) + break; + + if ((delta > CFG_TIME_POST) && !post) { + printf("\nWhen released now, POST tests will be started."); + gpio_write_bit(CFG_GPIO_LED_GREEN, 0); + post = 1; + } + + if ((delta > CFG_TIME_FACTORY_RESET) && !factory_reset) { + printf("\nWhen released now, factory default values" + " will be restored."); + gpio_write_bit(CFG_GPIO_LED_RED, 0); + factory_reset = 1; + } + + udelay(1000); + if (!(count++ % 1000)) + printf("."); + } + + + printf("\nSW-Reset Button released after %d milli-seconds!\n", delta); + + if (delta > CFG_TIME_FACTORY_RESET) { + printf("Starting factory reset value restoration...\n"); + + /* + * Restore default setting + */ + restore_default(); + + /* + * Reset the board for default to become valid + */ + do_reset(NULL, 0, 0, NULL); + + return 0; + } + + if (delta > CFG_TIME_POST) { + printf("Starting POST configuration...\n"); + + /* + * Enable POST upon next bootup + */ + out_be32((void *)CFG_POST_MAGIC, REBOOT_MAGIC); + out_be32((void *)CFG_POST_VAL, REBOOT_DO_POST); + post_bootmode_init(); + + /* + * Reset the logbuffer for a clean start + */ + logbuff_reset(); + + do_reset(NULL, 0, 0, NULL); + + return 0; + } + + return 0; +} + +U_BOOT_CMD ( + chkreset, 1, 1, do_chkreset, + "chkreset- Check for status of SW-reset button and act accordingly\n", + NULL +); + +#if defined(CONFIG_POST) +/* + * Returns 1 if keys pressed to start the power-on long-running tests + * Called from board_init_f(). + */ +int post_hotkeys_pressed(void) +{ + u32 post_magic; + u32 post_val; + + post_magic = in_be32((void *)CFG_POST_MAGIC); + post_val = in_be32((void *)CFG_POST_VAL); + + if ((post_magic == REBOOT_MAGIC) && (post_val == REBOOT_DO_POST)) + return 1; + else + return 0; +} +#endif /* CONFIG_POST */ diff --git a/cpu/ppc4xx/sdram.c b/cpu/ppc4xx/sdram.c index 3a0ca17d9fe..2724d91f0f1 100644 --- a/cpu/ppc4xx/sdram.c +++ b/cpu/ppc4xx/sdram.c @@ -187,14 +187,14 @@ void sdram_init(void) /* * Disable memory controller. */ - mtsdram0(mem_mcopt1, 0x00000000); + mtsdram(mem_mcopt1, 0x00000000); /* * Set MB0CF for bank 0. */ - mtsdram0(mem_mb0cf, mb0cf[i].reg); - mtsdram0(mem_sdtr1, sdtr1); - mtsdram0(mem_rtr, compute_rtr(speed, mb0cf[i].rows, 64)); + mtsdram(mem_mb0cf, mb0cf[i].reg); + mtsdram(mem_sdtr1, sdtr1); + mtsdram(mem_rtr, compute_rtr(speed, mb0cf[i].rows, 64)); udelay(200); @@ -203,7 +203,7 @@ void sdram_init(void) * Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst * read/prefetch. */ - mtsdram0(mem_mcopt1, 0x80800000); + mtsdram(mem_mcopt1, 0x80800000); udelay(10000); @@ -215,10 +215,21 @@ void sdram_init(void) #ifdef CONFIG_SDRAM_BANK1 u32 b1cr = mb0cf[i].size | mb0cf[i].reg; - mtsdram0(mem_mcopt1, 0x00000000); - mtsdram0(mem_mb1cf, b1cr); /* SDRAM0_B1CR */ - mtsdram0(mem_mcopt1, 0x80800000); + mtsdram(mem_mcopt1, 0x00000000); + mtsdram(mem_mb1cf, b1cr); /* SDRAM0_B1CR */ + mtsdram(mem_mcopt1, 0x80800000); udelay(10000); + + /* + * Check if 2nd bank is really available. + * If the size not equal to the size of the first + * bank, then disable the 2nd bank completely. + */ + if (get_ram_size((long *)mb0cf[i].size, mb0cf[i].size) != + mb0cf[i].size) { + mtsdram(mem_mb1cf, 0); + mtsdram(mem_mcopt1, 0); + } #endif return; } diff --git a/cpu/ppc4xx/sdram.h b/cpu/ppc4xx/sdram.h index 62b5442f3ba..4fb9b1ae14e 100644 --- a/cpu/ppc4xx/sdram.h +++ b/cpu/ppc4xx/sdram.h @@ -29,8 +29,6 @@ #include -#define mtsdram0(reg, data) mtdcr(memcfga,reg);mtdcr(memcfgd,data) - #define ONE_BILLION 1000000000 struct sdram_conf_s { diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index 18d34456095..9626b65c885 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -1869,38 +1869,7 @@ ppc405ep_init: ori r3,r3,CFG_EBC_PB4CR@l mtdcr ebccfgd,r3 #endif -#ifdef CONFIG_TAIHU - mfdcr r4, CPC0_BOOT - andi. r5, r4, CPC0_BOOT_SEP@l - bne strap_0 /* serial eeprom present */ -#endif - -#ifndef CFG_CPC0_PCI - li r3,CPC0_PCI_HOST_CFG_EN -#ifdef CONFIG_BUBINGA - /* - !----------------------------------------------------------------------- - ! Check FPGA for PCI internal/external arbitration - ! If board is set to internal arbitration, update cpc0_pci - !----------------------------------------------------------------------- - */ - addis r5,r0,FPGA_REG1@h /* set offset for FPGA_REG1 */ - ori r5,r5,FPGA_REG1@l - lbz r5,0x0(r5) /* read to get PCI arb selection */ - andi. r6,r5,FPGA_REG1_PCI_INT_ARB /* using internal arbiter ?*/ - beq ..pci_cfg_set /* if not set, then bypass reg write*/ -#endif - ori r3,r3,CPC0_PCI_ARBIT_EN -#ifdef CONFIG_TAIHU - ori r3,r3,CPC0_PCI_SPE -#endif -#else /* CFG_CPC0_PCI */ - li r3,CFG_CPC0_PCI -#endif /* CFG_CPC0_PCI */ -..pci_cfg_set: - mtdcr CPC0_PCI, r3 /* Enable internal arbiter*/ -strap_0: /* !----------------------------------------------------------------------- ! Check to see if chip is in bypass mode. @@ -1966,6 +1935,21 @@ strap_0: bne _pci_66mhz #endif /* CONFIG_TAIHU */ +#if defined(CONFIG_ZEUS) + mfdcr r4, CPC0_BOOT + andi. r5, r4, CPC0_BOOT_SEP@l + bne strap_1 /* serial eeprom present */ + lis r3,0x0000 + addi r3,r3,0x3030 + lis r4,0x8042 + addi r4,r4,0x223e + b 1f +strap_1: + mfdcr r3, CPC0_PLLMR0 + mfdcr r4, CPC0_PLLMR1 + b 1f +#endif + addis r3,0,PLLMR0_DEFAULT@h /* PLLMR0 default value */ ori r3,r3,PLLMR0_DEFAULT@l /* */ addis r4,0,PLLMR1_DEFAULT@h /* PLLMR1 default value */ @@ -1982,9 +1966,9 @@ _pci_66mhz: strap_1: mfdcr r3, CPC0_PLLMR0 mfdcr r4, CPC0_PLLMR1 -1: #endif /* CONFIG_TAIHU */ +1: b pll_write /* Write the CPC0_PLLMR with new value */ pll_done: diff --git a/doc/README.zeus b/doc/README.zeus new file mode 100644 index 00000000000..1848d8cd384 --- /dev/null +++ b/doc/README.zeus @@ -0,0 +1,73 @@ + +Storage of the board specific values (ethaddr...) +------------------------------------------------- + +The board specific environment variables that should be unique +for each individual board, can be stored in the I2C EEPROM. This +will be done from offset 0x80 with the length of 0x80 bytes. The +following command can be used to store the values here: + +=> setdef de:20:6a:ed:e2:72 de:20:6a:ed:e2:73 AB0001 + + ethaddr eth1addr serial# + +Now those 3 values are stored into the I2C EEPROM. A CRC is added +to make sure that the values get not corrupted. + + +SW-Reset Pushbutton handling: +----------------------------- + +The SW-reset push button is connected to a GPIO input too. This +way U-Boot can "see" how long the SW-reset was pressed, and a +specific action can be taken. Two different actions are supported: + +a) Release after more than 5 seconds and less then 10 seconds: + -> Run POST + + Please note, that the POST test will take a while (approx. 1 min + on the 128MByte board). This is mainly due to the system memory + test. + +b) Release after more than 10 seconds: + -> Restore factory default settings + + The factory default values are restored. The default environment + variables are restored (ipaddr, serverip...) and the board + specific values (ethaddr, eth1addr and serial#) are restored + to the environment from the I2C EEPROM. Also a bootline parameter + is added to the Linux bootline to signal the Linux kernel upon + the next startup, that the factory defaults should be restored. + +The command to check this sw-reset status and act accordingly is + +=> chkreset + +This command is added to the default "bootcmd", so that it is called +automatically upon startup. + +Also, the 2 LED's are used to indicate the current status of this +command (time passed since pushing the button). When the POST test +will be run, the green LED will be switched off, and when the +factory restore will be initiated, the reg LED will be switched off. + + +Loggin of POST results: +----------------------- + +The results of the POST tests are logged in a logbuffer located at the end +of the onboard memory. It can be accessed with the U-Boot command "log": + +=> log show +<4>POST memory PASSED +<4>POST cache PASSED +<4>POST cpu PASSED +<4>POST uart PASSED +<4>POST ethernet PASSED + +The DENX Linux kernel tree has support for this log buffer included. Exactly +this buffer is used for logging of all kernel messages too. By enabling the +compile time option "CONFIG_LOGBUFFER" this support is enabled. This way you +can access the U-Boot log messages from Linux too. + +2007-08-10, Stefan Roese diff --git a/include/configs/zeus.h b/include/configs/zeus.h new file mode 100644 index 00000000000..86a16e77a5d --- /dev/null +++ b/include/configs/zeus.h @@ -0,0 +1,375 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************ + * zeus.h - configuration for Zeus board + ***********************************************************************/ +#ifndef __CONFIG_H +#define __CONFIG_H + +/*----------------------------------------------------------------------- + * High Level Configuration Options + *----------------------------------------------------------------------*/ +#define CONFIG_ZEUS 1 /* Board is Zeus */ +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_405EP 1 /* Specifc 405EP support*/ + +#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ + +#define PLLMR0_DEFAULT PLLMR0_333_111_55_111 +#define PLLMR1_DEFAULT PLLMR1_333_111_55_111 + +#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ + +#define CONFIG_OVERWRITE_ETHADDR_ONCE 1 + +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_PHY_ADDR 0x01 /* PHY address */ +#define CONFIG_HAS_ETH1 1 +#define CONFIG_PHY1_ADDR 0x11 /* EMAC1 PHY address */ +#define CONFIG_NET_MULTI 1 +#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */ +#define CONFIG_PHY_RESET 1 +#define CONFIG_PHY_RESET_DELAY 300 /* PHY RESET recovery delay */ + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_CACHE | \ + CFG_CMD_DHCP | \ + CFG_CMD_DIAG | \ + CFG_CMD_EEPROM | \ + CFG_CMD_ELF | \ + CFG_CMD_I2C | \ + CFG_CMD_IRQ | \ + CFG_CMD_LOG | \ + CFG_CMD_MII | \ + CFG_CMD_NET | \ + CFG_CMD_NFS | \ + CFG_CMD_PING | \ + CFG_CMD_REGINFO) + +/* POST support */ +#define CONFIG_POST (CFG_POST_MEMORY | \ + CFG_POST_CPU | \ + CFG_POST_CACHE | \ + CFG_POST_UART | \ + CFG_POST_ETHER) + +#define CFG_POST_ETHER_EXT_LOOPBACK /* eth POST using ext loopack connector */ + +/* Define here the base-addresses of the UARTs to test in POST */ +#define CFG_POST_UART_TABLE {UART0_BASE} + +#define CONFIG_LOGBUFFER +#define CFG_POST_CACHE_ADDR 0x00800000 /* free virtual address */ + +#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */ + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/*----------------------------------------------------------------------- + * SDRAM + *----------------------------------------------------------------------*/ +/* + * SDRAM configuration (please see cpu/ppc/sdram.[ch]) + */ +#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ +#define CONFIG_SDRAM_BANK1 1 /* init onboard SDRAM bank 1 */ + +/* SDRAM timings used in datasheet */ +#define CFG_SDRAM_CL 3 /* CAS latency */ +#define CFG_SDRAM_tRP 20 /* PRECHARGE command period */ +#define CFG_SDRAM_tRC 66 /* ACTIVE-to-ACTIVE command period */ +#define CFG_SDRAM_tRCD 20 /* ACTIVE-to-READ delay */ +#define CFG_SDRAM_tRFC 66 /* Auto refresh period */ + +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */ +#define CFG_BASE_BAUD 691200 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SERIAL_MULTI + +/* The following table includes the supported baudrates */ +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} + +/*----------------------------------------------------------------------- + * Miscellaneous configurable options + *----------------------------------------------------------------------*/ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + +/*----------------------------------------------------------------------- + * I2C + *----------------------------------------------------------------------*/ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +/* these are for the ST M24C02 2kbit serial i2c eeprom */ +#define CFG_I2C_EEPROM_ADDR 0x50 /* base address */ +#define CFG_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */ +/* mask of address bits that overflow into the "EEPROM chip address" */ +#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07 + +#define CFG_EEPROM_PAGE_WRITE_ENABLE 1 /* write eeprom in pages */ +#define CFG_EEPROM_PAGE_WRITE_BITS 3 /* 8 byte write page size */ +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ + +/* + * The layout of the I2C EEPROM, used for bootstrap setup and for board- + * specific values, like ethaddr... that can be restored via the sw-reset + * button + */ +#define FACTORY_RESET_I2C_EEPROM 0x50 +#define FACTORY_RESET_ENV_OFFS 0x80 +#define FACTORY_RESET_ENV_SIZE 0x80 + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_FLASH_BASE 0xFF000000 +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ +#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN) + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ + +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } + +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */ + +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ + +#ifdef CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ +#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#endif + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_DCACHE_SIZE 16384 /* For IBM 405EP CPU */ +#define CFG_CACHELINE_SIZE 32 /* ... */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in data cache) + */ +/* use on chip memory (OCM) for temperary stack until sdram is tested */ +#define CFG_TEMP_STACK_OCM 1 + +/* On Chip Memory location */ +#define CFG_OCM_DATA_ADDR 0xF8000000 +#define CFG_OCM_DATA_SIZE 0x1000 +#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of OCM */ +#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */ + +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +/* reserve some memory for POST and BOOT limit info */ +#define CFG_INIT_SP_OFFSET (CFG_GBL_DATA_OFFSET - 16) + +/* extra data in OCM */ +#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 4) +#define CFG_POST_MAGIC (CFG_OCM_DATA_ADDR + CFG_GBL_DATA_OFFSET - 8) +#define CFG_POST_VAL (CFG_OCM_DATA_ADDR + CFG_GBL_DATA_OFFSET - 12) + +/*----------------------------------------------------------------------- + * External Bus Controller (EBC) Setup + */ + +/* Memory Bank 0 (Flash 16M) initialization */ +#define CFG_EBC_PB0AP 0x05815600 +#define CFG_EBC_PB0CR 0xFF09A000 /* BAS=0xFF0,BS=16MB,BU=R/W,BW=16bit */ + +/*----------------------------------------------------------------------- + * Definitions for GPIO setup (PPC405EP specific) + * + * GPIO0[0] - External Bus Controller BLAST output + * GPIO0[1-9] - Instruction trace outputs + * GPIO0[10-13] - External Bus Controller CS_1 - CS_4 outputs + * GPIO0[14-16] - External Bus Controller ABUS3-ABUS5 outputs + * GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs + * GPIO0[24-27] - UART0 control signal inputs/outputs + * GPIO0[28-29] - UART1 data signal input/output + * GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs + */ +#define CFG_GPIO0_OSRH 0x15555550 /* Chip selects */ +#define CFG_GPIO0_OSRL 0x00000110 /* UART_DTR-pin 27 alt out */ +#define CFG_GPIO0_ISR1H 0x10000041 /* Pin 2, 12 is input */ +#define CFG_GPIO0_ISR1L 0x15505440 /* OUT: LEDs 22/23; IN: pin12,2, NVALID# */ +#define CFG_GPIO0_TSRH 0x00000000 +#define CFG_GPIO0_TSRL 0x00000000 +#define CFG_GPIO0_TCR 0xBFF68317 /* 3-state OUT: 22/23/29; 12,2 is not 3-state */ +#define CFG_GPIO0_ODR 0x00000000 + +#define CFG_GPIO_SW_RESET 1 +#define CFG_GPIO_ZEUS_PE 12 +#define CFG_GPIO_LED_RED 22 +#define CFG_GPIO_LED_GREEN 23 + +/* Time in milli-seconds */ +#define CFG_TIME_POST 5000 +#define CFG_TIME_FACTORY_RESET 10000 + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* ENVIRONMENT VARS */ + +#define CONFIG_PREBOOT "echo;echo Welcome to Bulletendpoints board v1.1;echo" +#define CONFIG_IPADDR 192.168.1.10 +#define CONFIG_SERVERIP 192.168.1.100 +#define CONFIG_GATEWAYIP 192.168.1.100 +#define CONFIG_ETHADDR 50:00:00:00:06:00 +#define CONFIG_ETH1ADDR 50:00:00:00:06:01 +#if 0 +#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ +#else +#define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */ +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "logversion=2\0" \ + "hostname=zeus\0" \ + "netdev=eth0\0" \ + "ethact=ppc_4xx_eth0\0" \ + "netmask=255.255.255.0\0" \ + "ramdisk_size=50000\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw" \ + " nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw" \ + " ramdisk=${ramdisk_size}\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0," \ + "${baudrate}\0" \ + "net_nfs=tftp ${kernel_mem_addr} ${file_kernel};" \ + "run nfsargs addip addtty;bootm\0" \ + "net_ram=tftp ${kernel_mem_addr} ${file_kernel};" \ + "tftp ${ramdisk_mem_addr} ${file_fs};" \ + "run ramargs addip addtty;" \ + "bootm ${kernel_mem_addr} ${ramdisk_mem_addr}\0" \ + "rootpath=/target_fs/zeus\0" \ + "kernel_fl_addr=ff000000\0" \ + "kernel_mem_addr=200000\0" \ + "ramdisk_fl_addr=ff300000\0" \ + "ramdisk_mem_addr=4000000\0" \ + "uboot_fl_addr=fffc0000\0" \ + "uboot_mem_addr=100000\0" \ + "file_uboot=/zeus/u-boot.bin\0" \ + "tftp_uboot=tftp 100000 ${file_uboot}\0" \ + "update_uboot=protect off fffc0000 ffffffff;" \ + "era fffc0000 ffffffff;cp.b 100000 fffc0000 40000;" \ + "protect on fffc0000 ffffffff\0" \ + "upd_uboot=run tftp_uboot;run update_uboot\0" \ + "file_kernel=/zeus/uImage_ba\0" \ + "tftp_kernel=tftp 100000 ${file_kernel}\0" \ + "update_kernel=protect off ff000000 ff17ffff;" \ + "era ff000000 ff17ffff;cp.b 100000 ff000000 180000\0" \ + "upd_kernel=run tftp_kernel;run update_kernel\0" \ + "file_fs=/zeus/rootfs_ba.img\0" \ + "tftp_fs=tftp 100000 ${file_fs}\0" \ + "update_fs=protect off ff300000 ff87ffff;era ff300000 ff87ffff;"\ + "cp.b 100000 ff300000 580000\0" \ + "upd_fs=run tftp_fs;run update_fs\0" \ + "bootcmd=chkreset;run ramargs addip addtty addmisc;" \ + "bootm ${kernel_fl_addr} ${ramdisk_fl_addr}\0" \ + "" + +#endif /* __CONFIG_H */ diff --git a/include/ppc405.h b/include/ppc405.h index 8e64731929e..4fc52833d40 100644 --- a/include/ppc405.h +++ b/include/ppc405.h @@ -541,6 +541,18 @@ #define PLLMR1_266_66_33_33 (PLL_FBKDIV_8 | \ PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) +#define PLLMR0_333_111_55_37 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \ + PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \ + PLL_MALDIV_1 | PLL_PCIDIV_3) +#define PLLMR1_333_111_55_37 (PLL_FBKDIV_10 | \ + PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI) +#define PLLMR0_333_111_55_111 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \ + PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \ + PLL_MALDIV_1 | PLL_PCIDIV_1) +#define PLLMR1_333_111_55_111 (PLL_FBKDIV_10 | \ + PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI) /* * PLL Voltage Controlled Oscillator (VCO) definitions @@ -1226,6 +1238,8 @@ #define mtebc(reg, data) mtdcr(ebccfga,reg);mtdcr(ebccfgd,data) #define mfebc(reg, data) mtdcr(ebccfga,reg);data = mfdcr(ebccfgd) +#define mtsdram(reg, data) do { mtdcr(memcfga,reg);mtdcr(memcfgd,data); } while (0) +#define mfsdram(reg, data) do { mtdcr(memcfga,reg);data = mfdcr(memcfgd); } while (0) #ifndef __ASSEMBLY__ -- cgit v1.3.1 From 4ce917742b1e48faa9bf9a9757545e56fb4cfe44 Mon Sep 17 00:00:00 2001 From: Jon Loeliger Date: Wed, 15 Aug 2007 12:20:40 -0500 Subject: Move the MPC8641HPCN board under board/freescale. Minor path corrections needed to ensure buildability. Signed-off-by: Jon Loeliger --- Makefile | 2 +- board/freescale/common/sys_eeprom.c | 256 +++++++++++++++++++ board/freescale/mpc8641hpcn/Makefile | 59 +++++ board/freescale/mpc8641hpcn/config.mk | 31 +++ board/freescale/mpc8641hpcn/init.S | 179 +++++++++++++ board/freescale/mpc8641hpcn/mpc8641hpcn.c | 407 ++++++++++++++++++++++++++++++ board/freescale/mpc8641hpcn/u-boot.lds | 136 ++++++++++ board/mpc8641hpcn/Makefile | 58 ----- board/mpc8641hpcn/config.mk | 31 --- board/mpc8641hpcn/init.S | 179 ------------- board/mpc8641hpcn/mpc8641hpcn.c | 407 ------------------------------ board/mpc8641hpcn/sys_eeprom.c | 256 ------------------- board/mpc8641hpcn/u-boot.lds | 136 ---------- 13 files changed, 1069 insertions(+), 1068 deletions(-) create mode 100644 board/freescale/common/sys_eeprom.c create mode 100644 board/freescale/mpc8641hpcn/Makefile create mode 100644 board/freescale/mpc8641hpcn/config.mk create mode 100644 board/freescale/mpc8641hpcn/init.S create mode 100644 board/freescale/mpc8641hpcn/mpc8641hpcn.c create mode 100644 board/freescale/mpc8641hpcn/u-boot.lds delete mode 100644 board/mpc8641hpcn/Makefile delete mode 100644 board/mpc8641hpcn/config.mk delete mode 100644 board/mpc8641hpcn/init.S delete mode 100644 board/mpc8641hpcn/mpc8641hpcn.c delete mode 100644 board/mpc8641hpcn/sys_eeprom.c delete mode 100644 board/mpc8641hpcn/u-boot.lds (limited to 'Makefile') diff --git a/Makefile b/Makefile index 9dee9483c63..65efd3f5e05 100644 --- a/Makefile +++ b/Makefile @@ -1900,7 +1900,7 @@ TQM8560_config: unconfig ######################################################################### MPC8641HPCN_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8641hpcn + @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8641hpcn freescale sbc8641d_config: unconfig @./mkconfig $(@:_config=) ppc mpc86xx sbc8641d diff --git a/board/freescale/common/sys_eeprom.c b/board/freescale/common/sys_eeprom.c new file mode 100644 index 00000000000..7bc663bba46 --- /dev/null +++ b/board/freescale/common/sys_eeprom.c @@ -0,0 +1,256 @@ +/* + * Copyright 2006 Freescale Semiconductor + * York Sun (yorksun@freescale.com) + * Haiying Wang (haiying.wang@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include + +#ifdef CFG_ID_EEPROM +typedef struct { + unsigned char id[4]; /* 0x0000 - 0x0003 */ + unsigned char sn[12]; /* 0x0004 - 0x000F */ + unsigned char errata[5]; /* 0x0010 - 0x0014 */ + unsigned char date[7]; /* 0x0015 - 0x001a */ + unsigned char res_1[37]; /* 0x001b - 0x003f */ + unsigned char tab_size; /* 0x0040 */ + unsigned char tab_flag; /* 0x0041 */ + unsigned char mac[8][6]; /* 0x0042 - 0x0071 */ + unsigned char res_2[126]; /* 0x0072 - 0x00ef */ + unsigned int crc; /* 0x00f0 - 0x00f3 crc32 checksum */ +} EEPROM_data; + +static EEPROM_data mac_data; + +int mac_show(void) +{ + int i; + unsigned char ethaddr[8][18]; + + printf("ID %c%c%c%c\n", + mac_data.id[0], + mac_data.id[1], + mac_data.id[2], + mac_data.id[3]); + printf("Errata %c%c%c%c%c\n", + mac_data.errata[0], + mac_data.errata[1], + mac_data.errata[2], + mac_data.errata[3], + mac_data.errata[4]); + printf("Date %c%c%c%c%c%c%c\n", + mac_data.date[0], + mac_data.date[1], + mac_data.date[2], + mac_data.date[3], + mac_data.date[4], + mac_data.date[5], + mac_data.date[6]); + for (i = 0; i < 8; i++) { + sprintf((char *)ethaddr[i], + "%02x:%02x:%02x:%02x:%02x:%02x", + mac_data.mac[i][0], + mac_data.mac[i][1], + mac_data.mac[i][2], + mac_data.mac[i][3], + mac_data.mac[i][4], + mac_data.mac[i][5]); + printf("MAC %d %s\n", i, ethaddr[i]); + } + + setenv("ethaddr", (char *)ethaddr[0]); + setenv("eth1addr", (char *)ethaddr[1]); + setenv("eth2addr", (char *)ethaddr[2]); + setenv("eth3addr", (char *)ethaddr[3]); + + return 0; +} + +int mac_read(void) +{ + int ret, length; + unsigned int crc = 0; + unsigned char dev = ID_EEPROM_ADDR, *data; + + length = sizeof(EEPROM_data); + ret = i2c_read(dev, 0, 1, (unsigned char *)(&mac_data), length); + if (ret) { + printf("Read failed.\n"); + return -1; + } + + data = (unsigned char *)(&mac_data); + printf("Check CRC on reading ..."); + crc = crc32(crc, data, length - 4); + if (crc != mac_data.crc) { + printf("CRC checksum is invalid, in EEPROM CRC is %x, calculated CRC is %x\n", + mac_data.crc, crc); + return -1; + } else { + printf("CRC OK\n"); + mac_show(); + } + return 0; +} + +int mac_prog(void) +{ + int ret, i, length; + unsigned int crc = 0; + unsigned char dev = ID_EEPROM_ADDR, *ptr; + unsigned char *eeprom_data = (unsigned char *)(&mac_data); + + for (i = 0; i < sizeof(mac_data.res_1); i++) + mac_data.res_1[i] = 0; + for (i = 0; i < sizeof(mac_data.res_2); i++) + mac_data.res_2[i] = 0; + length = sizeof(EEPROM_data); + crc = crc32(crc, eeprom_data, length - 4); + mac_data.crc = crc; + for (i = 0, ptr = eeprom_data; i < length; i += 8, ptr += 8) { + ret = + i2c_write(dev, i, 1, ptr, + (length - i) < 8 ? (length - i) : 8); + udelay(5000); /* 5ms write cycle timing */ + if (ret) + break; + } + if (ret) { + printf("Programming failed.\n"); + return -1; + } else { + printf("Programming %d bytes. Reading back ...\n", length); + mac_read(); + } + return 0; +} + +int do_mac(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + int i; + char cmd = 's'; + unsigned long long mac_val; + + if (i2c_probe(ID_EEPROM_ADDR) != 0) + return -1; + + if (argc > 1) { + cmd = argv[1][0]; + switch (cmd) { + case 'r': /* display */ + mac_read(); + break; + case 's': /* save */ + mac_prog(); + break; + case 'i': /* id */ + for (i = 0; i < 4; i++) { + mac_data.id[i] = argv[2][i]; + } + break; + case 'n': /* serial number */ + for (i = 0; i < 12; i++) { + mac_data.sn[i] = argv[2][i]; + } + break; + case 'e': /* errata */ + for (i = 0; i < 5; i++) { + mac_data.errata[i] = argv[2][i]; + } + break; + case 'd': /* date */ + for (i = 0; i < 7; i++) { + mac_data.date[i] = argv[2][i]; + } + break; + case 'p': /* number of ports */ + mac_data.tab_size = + (unsigned char)simple_strtoul(argv[2], NULL, 16); + break; + case '0': /* mac 0 */ + case '1': /* mac 1 */ + case '2': /* mac 2 */ + case '3': /* mac 3 */ + case '4': /* mac 4 */ + case '5': /* mac 5 */ + case '6': /* mac 6 */ + case '7': /* mac 7 */ + mac_val = simple_strtoull(argv[2], NULL, 16); + for (i = 0; i < 6; i++) { + mac_data.mac[cmd - '0'][i] = + *((unsigned char *) + (((unsigned int)(&mac_val)) + i + 2)); + } + break; + case 'h': /* help */ + default: + printf("Usage:\n%s\n", cmdtp->usage); + break; + } + } else { + mac_show(); + } + return 0; +} + +int mac_read_from_eeprom(void) +{ + int length, i; + unsigned char dev = ID_EEPROM_ADDR; + unsigned char *data; + unsigned char ethaddr[4][18]; + unsigned char enetvar[32]; + unsigned int crc = 0; + + length = sizeof(EEPROM_data); + if (i2c_read(dev, 0, 1, (unsigned char *)(&mac_data), length)) { + printf("Read failed.\n"); + return -1; + } + + data = (unsigned char *)(&mac_data); + crc = crc32(crc, data, length - 4); + if (crc != mac_data.crc) { + return -1; + } else { + for (i = 0; i < 4; i++) { + if (memcmp(&mac_data.mac[i], "\0\0\0\0\0\0", 6)) { + sprintf((char *)ethaddr[i], + "%02x:%02x:%02x:%02x:%02x:%02x", + mac_data.mac[i][0], + mac_data.mac[i][1], + mac_data.mac[i][2], + mac_data.mac[i][3], + mac_data.mac[i][4], + mac_data.mac[i][5]); + sprintf((char *)enetvar, + i ? "eth%daddr" : "ethaddr", + i); + setenv((char *)enetvar, (char *)ethaddr[i]); + } + } + } + return 0; +} +#endif /* CFG_ID_EEPROM */ diff --git a/board/freescale/mpc8641hpcn/Makefile b/board/freescale/mpc8641hpcn/Makefile new file mode 100644 index 00000000000..93b015d4743 --- /dev/null +++ b/board/freescale/mpc8641hpcn/Makefile @@ -0,0 +1,59 @@ +# +# (C) Copyright 2001 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o \ + ../common/sys_eeprom.o \ + ../common/pixis.o + +SOBJS := init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(OBJS) $(SOBJS) + +.PHONY: distclean +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude ($obj).depend + +######################################################################### diff --git a/board/freescale/mpc8641hpcn/config.mk b/board/freescale/mpc8641hpcn/config.mk new file mode 100644 index 00000000000..f778dcbe0c5 --- /dev/null +++ b/board/freescale/mpc8641hpcn/config.mk @@ -0,0 +1,31 @@ +# Copyright 2004 Freescale Semiconductor. +# Modified by Jeff Brown +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# mpc8641hpcn board +# default CCSRBAR is at 0xff700000 +# assume U-Boot is less than 0.5MB +# +TEXT_BASE = 0xfff00000 + +PLATFORM_CPPFLAGS += -DCONFIG_MPC86xx=1 +PLATFORM_CPPFLAGS += -DCONFIG_MPC8641=1 -maltivec -mabi=altivec -msoft-float diff --git a/board/freescale/mpc8641hpcn/init.S b/board/freescale/mpc8641hpcn/init.S new file mode 100644 index 00000000000..cb21ba6a75b --- /dev/null +++ b/board/freescale/mpc8641hpcn/init.S @@ -0,0 +1,179 @@ +/* + * Copyright 2004 Freescale Semiconductor. + * Jeff Brown + * Srikanth Srinivasan (srikanth.srinivasan@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +/* + * LAW(Local Access Window) configuration: + * + * 0x0000_0000 0x7fff_ffff DDR 2G + * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M + * 0xa000_0000 0xbfff_ffff PCI2 MEM 512M + * 0xc000_0000 0xdfff_ffff RapidIO 512M + * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M + * 0xe300_0000 0xe3ff_ffff PCI2 IO 16M + * 0xf800_0000 0xf80f_ffff CCSRBAR 1M + * 0xf810_0000 0xf81f_ffff PIXIS 1M + * 0xfe00_0000 0xffff_ffff FLASH (boot bank) 32M + * + * Notes: + * CCSRBAR don't need a configured Local Access Window. + * If flash is 8M at default position (last 8M), no LAW needed. + */ + +#if !defined(CONFIG_SPD_EEPROM) +#define LAWBAR1 ((CFG_DDR_SDRAM_BASE>>12) & 0xffffff) +#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_DDR1 | (LAWAR_SIZE & LAWAR_SIZE_256M)) +#else +#define LAWBAR1 0 +#define LAWAR1 ((LAWAR_TRGT_IF_DDR1 | (LAWAR_SIZE & LAWAR_SIZE_512M)) & ~LAWAR_EN) +#endif + +#define LAWBAR2 ((CFG_PCI1_MEM_BASE>>12) & 0xffffff) +#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M)) + +#define LAWBAR3 ((CFG_PCI2_MEM_BASE>>12) & 0xffffff) +#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M)) + +/* + * This is not so much the SDRAM map as it is the whole localbus map. + */ +#define LAWBAR4 ((0xf8100000>>12) & 0xffffff) +#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_2M)) + +#define LAWBAR5 ((CFG_PCI1_IO_PHYS>>12) & 0xffffff) +#define LAWAR5 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_16M)) + +#define LAWBAR6 ((CFG_PCI2_IO_PHYS>>12) & 0xffffff) +#define LAWAR6 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_16M)) + +#define LAWBAR7 ((0xfe000000 >>12) & 0xffffff) +#define LAWAR7 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_32M)) + +#if !defined(CONFIG_SPD_EEPROM) +#define LAWBAR8 ((CFG_DDR_SDRAM_BASE>>12) & 0xffffff) +#define LAWAR8 (LAWAR_EN | LAWAR_TRGT_IF_DDR2 | (LAWAR_SIZE & LAWAR_SIZE_256M)) +#else +#define LAWBAR8 0 +#define LAWAR8 ((LAWAR_TRGT_IF_DDR2 | (LAWAR_SIZE & LAWAR_SIZE_512M)) & ~LAWAR_EN) +#endif + +#define LAWBAR9 ((CFG_RIO_MEM_PHYS>>12) & 0xfffff) +#define LAWAR9 (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M)) + + .section .bootpg, "ax" + .globl law_entry +law_entry: + lis r7,CFG_CCSRBAR@h + ori r7,r7,CFG_CCSRBAR@l + + addi r4,r7,0 + addi r5,r7,0 + + /* Skip LAWAR0, start at LAWAR1 */ + lis r6,LAWBAR1@h + ori r6,r6,LAWBAR1@l + stwu r6, 0xc28(r4) + + lis r6,LAWAR1@h + ori r6,r6,LAWAR1@l + stwu r6, 0xc30(r5) + + /* LAWBAR2, LAWAR2 */ + lis r6,LAWBAR2@h + ori r6,r6,LAWBAR2@l + stwu r6, 0x20(r4) + + lis r6,LAWAR2@h + ori r6,r6,LAWAR2@l + stwu r6, 0x20(r5) + + /* LAWBAR3, LAWAR3 */ + lis r6,LAWBAR3@h + ori r6,r6,LAWBAR3@l + stwu r6, 0x20(r4) + + lis r6,LAWAR3@h + ori r6,r6,LAWAR3@l + stwu r6, 0x20(r5) + + /* LAWBAR4, LAWAR4 */ + lis r6,LAWBAR4@h + ori r6,r6,LAWBAR4@l + stwu r6, 0x20(r4) + + lis r6,LAWAR4@h + ori r6,r6,LAWAR4@l + stwu r6, 0x20(r5) + /* LAWBAR5, LAWAR5 */ + lis r6,LAWBAR5@h + ori r6,r6,LAWBAR5@l + stwu r6, 0x20(r4) + + lis r6,LAWAR5@h + ori r6,r6,LAWAR5@l + stwu r6, 0x20(r5) + + /* LAWBAR6, LAWAR6 */ + lis r6,LAWBAR6@h + ori r6,r6,LAWBAR6@l + stwu r6, 0x20(r4) + + lis r6,LAWAR6@h + ori r6,r6,LAWAR6@l + stwu r6, 0x20(r5) + + /* LAWBAR7, LAWAR7 */ + lis r6,LAWBAR7@h + ori r6,r6,LAWBAR7@l + stwu r6, 0x20(r4) + + lis r6,LAWAR7@h + ori r6,r6,LAWAR7@l + stwu r6, 0x20(r5) + + /* LAWBAR8, LAWAR8 */ + lis r6,LAWBAR8@h + ori r6,r6,LAWBAR8@l + stwu r6, 0x20(r4) + + lis r6,LAWAR8@h + ori r6,r6,LAWAR8@l + stwu r6, 0x20(r5) + + /* LAWBAR9, LAWAR9 */ + lis r6,LAWBAR9@h + ori r6,r6,LAWBAR9@l + stwu r6, 0x20(r4) + + lis r6,LAWAR9@h + ori r6,r6,LAWAR9@l + stwu r6, 0x20(r5) + + blr diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c new file mode 100644 index 00000000000..ffd11cb5f13 --- /dev/null +++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c @@ -0,0 +1,407 @@ +/* + * Copyright 2006, 2007 Freescale Semiconductor. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +#if defined(CONFIG_OF_FLAT_TREE) +#include +extern void ft_cpu_setup(void *blob, bd_t *bd); +#endif + +#include "../common/pixis.h" + +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) +extern void ddr_enable_ecc(unsigned int dram_size); +#endif + +#if defined(CONFIG_SPD_EEPROM) +#include "spd_sdram.h" +#endif + +void sdram_init(void); +long int fixed_sdram(void); + + +int board_early_init_f(void) +{ + return 0; +} + +int checkboard(void) +{ + puts("Board: MPC8641HPCN\n"); + + return 0; +} + + +long int +initdram(int board_type) +{ + long dram_size = 0; + +#if defined(CONFIG_SPD_EEPROM) + dram_size = spd_sdram(); +#else + dram_size = fixed_sdram(); +#endif + +#if defined(CFG_RAMBOOT) + puts(" DDR: "); + return dram_size; +#endif + +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) + /* + * Initialize and enable DDR ECC. + */ + ddr_enable_ecc(dram_size); +#endif + + puts(" DDR: "); + return dram_size; +} + + +#if defined(CFG_DRAM_TEST) +int +testdram(void) +{ + uint *pstart = (uint *) CFG_MEMTEST_START; + uint *pend = (uint *) CFG_MEMTEST_END; + uint *p; + + puts("SDRAM test phase 1:\n"); + for (p = pstart; p < pend; p++) + *p = 0xaaaaaaaa; + + for (p = pstart; p < pend; p++) { + if (*p != 0xaaaaaaaa) { + printf("SDRAM test fails at: %08x\n", (uint) p); + return 1; + } + } + + puts("SDRAM test phase 2:\n"); + for (p = pstart; p < pend; p++) + *p = 0x55555555; + + for (p = pstart; p < pend; p++) { + if (*p != 0x55555555) { + printf("SDRAM test fails at: %08x\n", (uint) p); + return 1; + } + } + + puts("SDRAM test passed.\n"); + return 0; +} +#endif + + +#if !defined(CONFIG_SPD_EEPROM) +/* + * Fixed sdram init -- doesn't use serial presence detect. + */ +long int +fixed_sdram(void) +{ +#if !defined(CFG_RAMBOOT) + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile ccsr_ddr_t *ddr = &immap->im_ddr1; + + ddr->cs0_bnds = CFG_DDR_CS0_BNDS; + ddr->cs0_config = CFG_DDR_CS0_CONFIG; + ddr->ext_refrec = CFG_DDR_EXT_REFRESH; + ddr->timing_cfg_0 = CFG_DDR_TIMING_0; + ddr->timing_cfg_1 = CFG_DDR_TIMING_1; + ddr->timing_cfg_2 = CFG_DDR_TIMING_2; + ddr->sdram_mode_1 = CFG_DDR_MODE_1; + ddr->sdram_mode_2 = CFG_DDR_MODE_2; + ddr->sdram_interval = CFG_DDR_INTERVAL; + ddr->sdram_data_init = CFG_DDR_DATA_INIT; + ddr->sdram_clk_cntl = CFG_DDR_CLK_CTRL; + ddr->sdram_ocd_cntl = CFG_DDR_OCD_CTRL; + ddr->sdram_ocd_status = CFG_DDR_OCD_STATUS; + +#if defined (CONFIG_DDR_ECC) + ddr->err_disable = 0x0000008D; + ddr->err_sbe = 0x00ff0000; +#endif + asm("sync;isync"); + + udelay(500); + +#if defined (CONFIG_DDR_ECC) + /* Enable ECC checking */ + ddr->sdram_cfg_1 = (CFG_DDR_CONTROL | 0x20000000); +#else + ddr->sdram_cfg_1 = CFG_DDR_CONTROL; + ddr->sdram_cfg_2 = CFG_DDR_CONTROL2; +#endif + asm("sync; isync"); + + udelay(500); +#endif + return CFG_SDRAM_SIZE * 1024 * 1024; +} +#endif /* !defined(CONFIG_SPD_EEPROM) */ + + +#if defined(CONFIG_PCI) +/* + * Initialize PCI Devices, report devices found. + */ + +#ifndef CONFIG_PCI_PNP +static struct pci_config_table pci_fsl86xxads_config_table[] = { + {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + PCI_IDSEL_NUMBER, PCI_ANY_ID, + pci_cfgfunc_config_device, {PCI_ENET0_IOADDR, + PCI_ENET0_MEMADDR, + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}}, + {} +}; +#endif + + +static struct pci_controller pci1_hose = { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc86xxcts_config_table +#endif +}; +#endif /* CONFIG_PCI */ + +#ifdef CONFIG_PCI2 +static struct pci_controller pci2_hose; +#endif /* CONFIG_PCI2 */ + +int first_free_busno = 0; + + +void pci_init_board(void) +{ + volatile immap_t *immap = (immap_t *) CFG_CCSRBAR; + volatile ccsr_gur_t *gur = &immap->im_gur; + uint devdisr = gur->devdisr; + uint io_sel = (gur->pordevsr & MPC86xx_PORDEVSR_IO_SEL) >> 16; + +#ifdef CONFIG_PCI1 +{ + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR; + extern void fsl_pci_init(struct pci_controller *hose); + struct pci_controller *hose = &pci1_hose; +#ifdef DEBUG + uint host1_agent = (gur->porbmsr & MPC86xx_PORBMSR_HA) >> 17; + uint pex1_agent = (host1_agent == 0) || (host1_agent == 1); +#endif + if ((io_sel == 2 || io_sel == 3 || io_sel == 5 + || io_sel == 6 || io_sel == 7 || io_sel == 0xF) + && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) { + debug("PCI-EXPRESS 1: %s \n", pex1_agent ? "Agent" : "Host"); + debug("0x%08x=0x%08x ", &pci->pme_msg_det, pci->pme_msg_det); + if (pci->pme_msg_det) { + pci->pme_msg_det = 0xffffffff; + debug(" with errors. Clearing. Now 0x%08x", + pci->pme_msg_det); + } + debug("\n"); + + /* inbound */ + pci_set_region(hose->regions + 0, + CFG_PCI_MEMORY_BUS, + CFG_PCI_MEMORY_PHYS, + CFG_PCI_MEMORY_SIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + /* outbound memory */ + pci_set_region(hose->regions + 1, + CFG_PCI1_MEM_BASE, + CFG_PCI1_MEM_PHYS, + CFG_PCI1_MEM_SIZE, + PCI_REGION_MEM); + + /* outbound io */ + pci_set_region(hose->regions + 2, + CFG_PCI1_IO_BASE, + CFG_PCI1_IO_PHYS, + CFG_PCI1_IO_SIZE, + PCI_REGION_IO); + + hose->region_count = 3; + + hose->first_busno=first_free_busno; + pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); + + fsl_pci_init(hose); + + first_free_busno=hose->last_busno+1; + printf (" PCI-EXPRESS 1 on bus %02x - %02x\n", + hose->first_busno,hose->last_busno); + + /* + * Activate ULI1575 legacy chip by performing a fake + * memory access. Needed to make ULI RTC work. + */ + in_be32((unsigned *) ((char *)(CFG_PCI1_MEM_BASE + + CFG_PCI1_MEM_SIZE - 0x1000000))); + + } else { + puts("PCI-EXPRESS 1: Disabled\n"); + } +} +#else + puts("PCI-EXPRESS1: Disabled\n"); +#endif /* CONFIG_PCI1 */ + +#ifdef CONFIG_PCI2 +{ + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI2_ADDR; + extern void fsl_pci_init(struct pci_controller *hose); + struct pci_controller *hose = &pci2_hose; + + + /* inbound */ + pci_set_region(hose->regions + 0, + CFG_PCI_MEMORY_BUS, + CFG_PCI_MEMORY_PHYS, + CFG_PCI_MEMORY_SIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + /* outbound memory */ + pci_set_region(hose->regions + 1, + CFG_PCI2_MEM_BASE, + CFG_PCI2_MEM_PHYS, + CFG_PCI2_MEM_SIZE, + PCI_REGION_MEM); + + /* outbound io */ + pci_set_region(hose->regions + 2, + CFG_PCI2_IO_BASE, + CFG_PCI2_IO_PHYS, + CFG_PCI2_IO_SIZE, + PCI_REGION_IO); + + hose->region_count = 3; + + hose->first_busno=first_free_busno; + pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); + + fsl_pci_init(hose); + + first_free_busno=hose->last_busno+1; + printf (" PCI-EXPRESS 2 on bus %02x - %02x\n", + hose->first_busno,hose->last_busno); +} +#else + puts("PCI-EXPRESS 2: Disabled\n"); +#endif /* CONFIG_PCI2 */ + +} + +#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) +void +ft_board_setup(void *blob, bd_t *bd) +{ + u32 *p; + int len; + + ft_cpu_setup(blob, bd); + + p = ft_get_prop(blob, "/memory/reg", &len); + if (p != NULL) { + *p++ = cpu_to_be32(bd->bi_memstart); + *p = cpu_to_be32(bd->bi_memsize); + } +} +#endif + + +/* + * get_board_sys_clk + * Reads the FPGA on board for CONFIG_SYS_CLK_FREQ + */ + +unsigned long +get_board_sys_clk(ulong dummy) +{ + u8 i, go_bit, rd_clks; + ulong val = 0; + + go_bit = in8(PIXIS_BASE + PIXIS_VCTL); + go_bit &= 0x01; + + rd_clks = in8(PIXIS_BASE + PIXIS_VCFGEN0); + rd_clks &= 0x1C; + + /* + * Only if both go bit and the SCLK bit in VCFGEN0 are set + * should we be using the AUX register. Remember, we also set the + * GO bit to boot from the alternate bank on the on-board flash + */ + + if (go_bit) { + if (rd_clks == 0x1c) + i = in8(PIXIS_BASE + PIXIS_AUX); + else + i = in8(PIXIS_BASE + PIXIS_SPD); + } else { + i = in8(PIXIS_BASE + PIXIS_SPD); + } + + i &= 0x07; + + switch (i) { + case 0: + val = 33000000; + break; + case 1: + val = 40000000; + break; + case 2: + val = 50000000; + break; + case 3: + val = 66000000; + break; + case 4: + val = 83000000; + break; + case 5: + val = 100000000; + break; + case 6: + val = 134000000; + break; + case 7: + val = 166000000; + break; + } + + return val; +} diff --git a/board/freescale/mpc8641hpcn/u-boot.lds b/board/freescale/mpc8641hpcn/u-boot.lds new file mode 100644 index 00000000000..fd163622a82 --- /dev/null +++ b/board/freescale/mpc8641hpcn/u-boot.lds @@ -0,0 +1,136 @@ +/* + * Copyright 2006, 2007 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) + +SECTIONS +{ + + /* Read-only sections, merged into text segment: */ + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/mpc86xx/start.o (.text) + board/freescale/mpc8641hpcn/init.o (.bootpg) + cpu/mpc86xx/traps.o (.text) + cpu/mpc86xx/interrupts.o (.text) + cpu/mpc86xx/cpu_init.o (.text) + cpu/mpc86xx/cpu.o (.text) + cpu/mpc86xx/speed.o (.text) + common/dlmalloc.o (.text) + lib_generic/crc32.o (.text) + lib_ppc/extable.o (.text) + lib_generic/zlib.o (.text) + drivers/bios_emulator/atibios.o (.text) + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __fixup_entries = (. - _FIXUP_TABLE_) >> 2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/mpc8641hpcn/Makefile b/board/mpc8641hpcn/Makefile deleted file mode 100644 index df56b31e581..00000000000 --- a/board/mpc8641hpcn/Makefile +++ /dev/null @@ -1,58 +0,0 @@ -# -# (C) Copyright 2001 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../freescale/common) -endif - -LIB = $(obj)lib$(BOARD).a - -COBJS := $(BOARD).o sys_eeprom.o \ - ../freescale/common/pixis.o - -SOBJS := init.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) - -clean: - rm -f $(OBJS) $(SOBJS) - -.PHONY: distclean -distclean: clean - rm -f $(LIB) core *.bak .depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude ($obj).depend - -######################################################################### diff --git a/board/mpc8641hpcn/config.mk b/board/mpc8641hpcn/config.mk deleted file mode 100644 index f778dcbe0c5..00000000000 --- a/board/mpc8641hpcn/config.mk +++ /dev/null @@ -1,31 +0,0 @@ -# Copyright 2004 Freescale Semiconductor. -# Modified by Jeff Brown -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# mpc8641hpcn board -# default CCSRBAR is at 0xff700000 -# assume U-Boot is less than 0.5MB -# -TEXT_BASE = 0xfff00000 - -PLATFORM_CPPFLAGS += -DCONFIG_MPC86xx=1 -PLATFORM_CPPFLAGS += -DCONFIG_MPC8641=1 -maltivec -mabi=altivec -msoft-float diff --git a/board/mpc8641hpcn/init.S b/board/mpc8641hpcn/init.S deleted file mode 100644 index cb21ba6a75b..00000000000 --- a/board/mpc8641hpcn/init.S +++ /dev/null @@ -1,179 +0,0 @@ -/* - * Copyright 2004 Freescale Semiconductor. - * Jeff Brown - * Srikanth Srinivasan (srikanth.srinivasan@freescale.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include - -/* - * LAW(Local Access Window) configuration: - * - * 0x0000_0000 0x7fff_ffff DDR 2G - * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M - * 0xa000_0000 0xbfff_ffff PCI2 MEM 512M - * 0xc000_0000 0xdfff_ffff RapidIO 512M - * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M - * 0xe300_0000 0xe3ff_ffff PCI2 IO 16M - * 0xf800_0000 0xf80f_ffff CCSRBAR 1M - * 0xf810_0000 0xf81f_ffff PIXIS 1M - * 0xfe00_0000 0xffff_ffff FLASH (boot bank) 32M - * - * Notes: - * CCSRBAR don't need a configured Local Access Window. - * If flash is 8M at default position (last 8M), no LAW needed. - */ - -#if !defined(CONFIG_SPD_EEPROM) -#define LAWBAR1 ((CFG_DDR_SDRAM_BASE>>12) & 0xffffff) -#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_DDR1 | (LAWAR_SIZE & LAWAR_SIZE_256M)) -#else -#define LAWBAR1 0 -#define LAWAR1 ((LAWAR_TRGT_IF_DDR1 | (LAWAR_SIZE & LAWAR_SIZE_512M)) & ~LAWAR_EN) -#endif - -#define LAWBAR2 ((CFG_PCI1_MEM_BASE>>12) & 0xffffff) -#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M)) - -#define LAWBAR3 ((CFG_PCI2_MEM_BASE>>12) & 0xffffff) -#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M)) - -/* - * This is not so much the SDRAM map as it is the whole localbus map. - */ -#define LAWBAR4 ((0xf8100000>>12) & 0xffffff) -#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_2M)) - -#define LAWBAR5 ((CFG_PCI1_IO_PHYS>>12) & 0xffffff) -#define LAWAR5 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_16M)) - -#define LAWBAR6 ((CFG_PCI2_IO_PHYS>>12) & 0xffffff) -#define LAWAR6 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_16M)) - -#define LAWBAR7 ((0xfe000000 >>12) & 0xffffff) -#define LAWAR7 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_32M)) - -#if !defined(CONFIG_SPD_EEPROM) -#define LAWBAR8 ((CFG_DDR_SDRAM_BASE>>12) & 0xffffff) -#define LAWAR8 (LAWAR_EN | LAWAR_TRGT_IF_DDR2 | (LAWAR_SIZE & LAWAR_SIZE_256M)) -#else -#define LAWBAR8 0 -#define LAWAR8 ((LAWAR_TRGT_IF_DDR2 | (LAWAR_SIZE & LAWAR_SIZE_512M)) & ~LAWAR_EN) -#endif - -#define LAWBAR9 ((CFG_RIO_MEM_PHYS>>12) & 0xfffff) -#define LAWAR9 (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M)) - - .section .bootpg, "ax" - .globl law_entry -law_entry: - lis r7,CFG_CCSRBAR@h - ori r7,r7,CFG_CCSRBAR@l - - addi r4,r7,0 - addi r5,r7,0 - - /* Skip LAWAR0, start at LAWAR1 */ - lis r6,LAWBAR1@h - ori r6,r6,LAWBAR1@l - stwu r6, 0xc28(r4) - - lis r6,LAWAR1@h - ori r6,r6,LAWAR1@l - stwu r6, 0xc30(r5) - - /* LAWBAR2, LAWAR2 */ - lis r6,LAWBAR2@h - ori r6,r6,LAWBAR2@l - stwu r6, 0x20(r4) - - lis r6,LAWAR2@h - ori r6,r6,LAWAR2@l - stwu r6, 0x20(r5) - - /* LAWBAR3, LAWAR3 */ - lis r6,LAWBAR3@h - ori r6,r6,LAWBAR3@l - stwu r6, 0x20(r4) - - lis r6,LAWAR3@h - ori r6,r6,LAWAR3@l - stwu r6, 0x20(r5) - - /* LAWBAR4, LAWAR4 */ - lis r6,LAWBAR4@h - ori r6,r6,LAWBAR4@l - stwu r6, 0x20(r4) - - lis r6,LAWAR4@h - ori r6,r6,LAWAR4@l - stwu r6, 0x20(r5) - /* LAWBAR5, LAWAR5 */ - lis r6,LAWBAR5@h - ori r6,r6,LAWBAR5@l - stwu r6, 0x20(r4) - - lis r6,LAWAR5@h - ori r6,r6,LAWAR5@l - stwu r6, 0x20(r5) - - /* LAWBAR6, LAWAR6 */ - lis r6,LAWBAR6@h - ori r6,r6,LAWBAR6@l - stwu r6, 0x20(r4) - - lis r6,LAWAR6@h - ori r6,r6,LAWAR6@l - stwu r6, 0x20(r5) - - /* LAWBAR7, LAWAR7 */ - lis r6,LAWBAR7@h - ori r6,r6,LAWBAR7@l - stwu r6, 0x20(r4) - - lis r6,LAWAR7@h - ori r6,r6,LAWAR7@l - stwu r6, 0x20(r5) - - /* LAWBAR8, LAWAR8 */ - lis r6,LAWBAR8@h - ori r6,r6,LAWBAR8@l - stwu r6, 0x20(r4) - - lis r6,LAWAR8@h - ori r6,r6,LAWAR8@l - stwu r6, 0x20(r5) - - /* LAWBAR9, LAWAR9 */ - lis r6,LAWBAR9@h - ori r6,r6,LAWBAR9@l - stwu r6, 0x20(r4) - - lis r6,LAWAR9@h - ori r6,r6,LAWAR9@l - stwu r6, 0x20(r5) - - blr diff --git a/board/mpc8641hpcn/mpc8641hpcn.c b/board/mpc8641hpcn/mpc8641hpcn.c deleted file mode 100644 index 1bfbe88b5aa..00000000000 --- a/board/mpc8641hpcn/mpc8641hpcn.c +++ /dev/null @@ -1,407 +0,0 @@ -/* - * Copyright 2006, 2007 Freescale Semiconductor. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include - -#if defined(CONFIG_OF_FLAT_TREE) -#include -extern void ft_cpu_setup(void *blob, bd_t *bd); -#endif - -#include "../freescale/common/pixis.h" - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) -extern void ddr_enable_ecc(unsigned int dram_size); -#endif - -#if defined(CONFIG_SPD_EEPROM) -#include "spd_sdram.h" -#endif - -void sdram_init(void); -long int fixed_sdram(void); - - -int board_early_init_f(void) -{ - return 0; -} - -int checkboard(void) -{ - puts("Board: MPC8641HPCN\n"); - - return 0; -} - - -long int -initdram(int board_type) -{ - long dram_size = 0; - -#if defined(CONFIG_SPD_EEPROM) - dram_size = spd_sdram(); -#else - dram_size = fixed_sdram(); -#endif - -#if defined(CFG_RAMBOOT) - puts(" DDR: "); - return dram_size; -#endif - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* - * Initialize and enable DDR ECC. - */ - ddr_enable_ecc(dram_size); -#endif - - puts(" DDR: "); - return dram_size; -} - - -#if defined(CFG_DRAM_TEST) -int -testdram(void) -{ - uint *pstart = (uint *) CFG_MEMTEST_START; - uint *pend = (uint *) CFG_MEMTEST_END; - uint *p; - - puts("SDRAM test phase 1:\n"); - for (p = pstart; p < pend; p++) - *p = 0xaaaaaaaa; - - for (p = pstart; p < pend; p++) { - if (*p != 0xaaaaaaaa) { - printf("SDRAM test fails at: %08x\n", (uint) p); - return 1; - } - } - - puts("SDRAM test phase 2:\n"); - for (p = pstart; p < pend; p++) - *p = 0x55555555; - - for (p = pstart; p < pend; p++) { - if (*p != 0x55555555) { - printf("SDRAM test fails at: %08x\n", (uint) p); - return 1; - } - } - - puts("SDRAM test passed.\n"); - return 0; -} -#endif - - -#if !defined(CONFIG_SPD_EEPROM) -/* - * Fixed sdram init -- doesn't use serial presence detect. - */ -long int -fixed_sdram(void) -{ -#if !defined(CFG_RAMBOOT) - volatile immap_t *immap = (immap_t *) CFG_IMMR; - volatile ccsr_ddr_t *ddr = &immap->im_ddr1; - - ddr->cs0_bnds = CFG_DDR_CS0_BNDS; - ddr->cs0_config = CFG_DDR_CS0_CONFIG; - ddr->ext_refrec = CFG_DDR_EXT_REFRESH; - ddr->timing_cfg_0 = CFG_DDR_TIMING_0; - ddr->timing_cfg_1 = CFG_DDR_TIMING_1; - ddr->timing_cfg_2 = CFG_DDR_TIMING_2; - ddr->sdram_mode_1 = CFG_DDR_MODE_1; - ddr->sdram_mode_2 = CFG_DDR_MODE_2; - ddr->sdram_interval = CFG_DDR_INTERVAL; - ddr->sdram_data_init = CFG_DDR_DATA_INIT; - ddr->sdram_clk_cntl = CFG_DDR_CLK_CTRL; - ddr->sdram_ocd_cntl = CFG_DDR_OCD_CTRL; - ddr->sdram_ocd_status = CFG_DDR_OCD_STATUS; - -#if defined (CONFIG_DDR_ECC) - ddr->err_disable = 0x0000008D; - ddr->err_sbe = 0x00ff0000; -#endif - asm("sync;isync"); - - udelay(500); - -#if defined (CONFIG_DDR_ECC) - /* Enable ECC checking */ - ddr->sdram_cfg_1 = (CFG_DDR_CONTROL | 0x20000000); -#else - ddr->sdram_cfg_1 = CFG_DDR_CONTROL; - ddr->sdram_cfg_2 = CFG_DDR_CONTROL2; -#endif - asm("sync; isync"); - - udelay(500); -#endif - return CFG_SDRAM_SIZE * 1024 * 1024; -} -#endif /* !defined(CONFIG_SPD_EEPROM) */ - - -#if defined(CONFIG_PCI) -/* - * Initialize PCI Devices, report devices found. - */ - -#ifndef CONFIG_PCI_PNP -static struct pci_config_table pci_fsl86xxads_config_table[] = { - {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, - PCI_IDSEL_NUMBER, PCI_ANY_ID, - pci_cfgfunc_config_device, {PCI_ENET0_IOADDR, - PCI_ENET0_MEMADDR, - PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}}, - {} -}; -#endif - - -static struct pci_controller pci1_hose = { -#ifndef CONFIG_PCI_PNP - config_table:pci_mpc86xxcts_config_table -#endif -}; -#endif /* CONFIG_PCI */ - -#ifdef CONFIG_PCI2 -static struct pci_controller pci2_hose; -#endif /* CONFIG_PCI2 */ - -int first_free_busno = 0; - - -void pci_init_board(void) -{ - volatile immap_t *immap = (immap_t *) CFG_CCSRBAR; - volatile ccsr_gur_t *gur = &immap->im_gur; - uint devdisr = gur->devdisr; - uint io_sel = (gur->pordevsr & MPC86xx_PORDEVSR_IO_SEL) >> 16; - -#ifdef CONFIG_PCI1 -{ - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); - struct pci_controller *hose = &pci1_hose; -#ifdef DEBUG - uint host1_agent = (gur->porbmsr & MPC86xx_PORBMSR_HA) >> 17; - uint pex1_agent = (host1_agent == 0) || (host1_agent == 1); -#endif - if ((io_sel == 2 || io_sel == 3 || io_sel == 5 - || io_sel == 6 || io_sel == 7 || io_sel == 0xF) - && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) { - debug("PCI-EXPRESS 1: %s \n", pex1_agent ? "Agent" : "Host"); - debug("0x%08x=0x%08x ", &pci->pme_msg_det, pci->pme_msg_det); - if (pci->pme_msg_det) { - pci->pme_msg_det = 0xffffffff; - debug(" with errors. Clearing. Now 0x%08x", - pci->pme_msg_det); - } - debug("\n"); - - /* inbound */ - pci_set_region(hose->regions + 0, - CFG_PCI_MEMORY_BUS, - CFG_PCI_MEMORY_PHYS, - CFG_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); - - /* outbound memory */ - pci_set_region(hose->regions + 1, - CFG_PCI1_MEM_BASE, - CFG_PCI1_MEM_PHYS, - CFG_PCI1_MEM_SIZE, - PCI_REGION_MEM); - - /* outbound io */ - pci_set_region(hose->regions + 2, - CFG_PCI1_IO_BASE, - CFG_PCI1_IO_PHYS, - CFG_PCI1_IO_SIZE, - PCI_REGION_IO); - - hose->region_count = 3; - - hose->first_busno=first_free_busno; - pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); - - fsl_pci_init(hose); - - first_free_busno=hose->last_busno+1; - printf (" PCI-EXPRESS 1 on bus %02x - %02x\n", - hose->first_busno,hose->last_busno); - - /* - * Activate ULI1575 legacy chip by performing a fake - * memory access. Needed to make ULI RTC work. - */ - in_be32((unsigned *) ((char *)(CFG_PCI1_MEM_BASE - + CFG_PCI1_MEM_SIZE - 0x1000000))); - - } else { - puts("PCI-EXPRESS 1: Disabled\n"); - } -} -#else - puts("PCI-EXPRESS1: Disabled\n"); -#endif /* CONFIG_PCI1 */ - -#ifdef CONFIG_PCI2 -{ - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI2_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); - struct pci_controller *hose = &pci2_hose; - - - /* inbound */ - pci_set_region(hose->regions + 0, - CFG_PCI_MEMORY_BUS, - CFG_PCI_MEMORY_PHYS, - CFG_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); - - /* outbound memory */ - pci_set_region(hose->regions + 1, - CFG_PCI2_MEM_BASE, - CFG_PCI2_MEM_PHYS, - CFG_PCI2_MEM_SIZE, - PCI_REGION_MEM); - - /* outbound io */ - pci_set_region(hose->regions + 2, - CFG_PCI2_IO_BASE, - CFG_PCI2_IO_PHYS, - CFG_PCI2_IO_SIZE, - PCI_REGION_IO); - - hose->region_count = 3; - - hose->first_busno=first_free_busno; - pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); - - fsl_pci_init(hose); - - first_free_busno=hose->last_busno+1; - printf (" PCI-EXPRESS 2 on bus %02x - %02x\n", - hose->first_busno,hose->last_busno); -} -#else - puts("PCI-EXPRESS 2: Disabled\n"); -#endif /* CONFIG_PCI2 */ - -} - -#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) -void -ft_board_setup(void *blob, bd_t *bd) -{ - u32 *p; - int len; - - ft_cpu_setup(blob, bd); - - p = ft_get_prop(blob, "/memory/reg", &len); - if (p != NULL) { - *p++ = cpu_to_be32(bd->bi_memstart); - *p = cpu_to_be32(bd->bi_memsize); - } -} -#endif - - -/* - * get_board_sys_clk - * Reads the FPGA on board for CONFIG_SYS_CLK_FREQ - */ - -unsigned long -get_board_sys_clk(ulong dummy) -{ - u8 i, go_bit, rd_clks; - ulong val = 0; - - go_bit = in8(PIXIS_BASE + PIXIS_VCTL); - go_bit &= 0x01; - - rd_clks = in8(PIXIS_BASE + PIXIS_VCFGEN0); - rd_clks &= 0x1C; - - /* - * Only if both go bit and the SCLK bit in VCFGEN0 are set - * should we be using the AUX register. Remember, we also set the - * GO bit to boot from the alternate bank on the on-board flash - */ - - if (go_bit) { - if (rd_clks == 0x1c) - i = in8(PIXIS_BASE + PIXIS_AUX); - else - i = in8(PIXIS_BASE + PIXIS_SPD); - } else { - i = in8(PIXIS_BASE + PIXIS_SPD); - } - - i &= 0x07; - - switch (i) { - case 0: - val = 33000000; - break; - case 1: - val = 40000000; - break; - case 2: - val = 50000000; - break; - case 3: - val = 66000000; - break; - case 4: - val = 83000000; - break; - case 5: - val = 100000000; - break; - case 6: - val = 134000000; - break; - case 7: - val = 166000000; - break; - } - - return val; -} diff --git a/board/mpc8641hpcn/sys_eeprom.c b/board/mpc8641hpcn/sys_eeprom.c deleted file mode 100644 index 7bc663bba46..00000000000 --- a/board/mpc8641hpcn/sys_eeprom.c +++ /dev/null @@ -1,256 +0,0 @@ -/* - * Copyright 2006 Freescale Semiconductor - * York Sun (yorksun@freescale.com) - * Haiying Wang (haiying.wang@freescale.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include - -#ifdef CFG_ID_EEPROM -typedef struct { - unsigned char id[4]; /* 0x0000 - 0x0003 */ - unsigned char sn[12]; /* 0x0004 - 0x000F */ - unsigned char errata[5]; /* 0x0010 - 0x0014 */ - unsigned char date[7]; /* 0x0015 - 0x001a */ - unsigned char res_1[37]; /* 0x001b - 0x003f */ - unsigned char tab_size; /* 0x0040 */ - unsigned char tab_flag; /* 0x0041 */ - unsigned char mac[8][6]; /* 0x0042 - 0x0071 */ - unsigned char res_2[126]; /* 0x0072 - 0x00ef */ - unsigned int crc; /* 0x00f0 - 0x00f3 crc32 checksum */ -} EEPROM_data; - -static EEPROM_data mac_data; - -int mac_show(void) -{ - int i; - unsigned char ethaddr[8][18]; - - printf("ID %c%c%c%c\n", - mac_data.id[0], - mac_data.id[1], - mac_data.id[2], - mac_data.id[3]); - printf("Errata %c%c%c%c%c\n", - mac_data.errata[0], - mac_data.errata[1], - mac_data.errata[2], - mac_data.errata[3], - mac_data.errata[4]); - printf("Date %c%c%c%c%c%c%c\n", - mac_data.date[0], - mac_data.date[1], - mac_data.date[2], - mac_data.date[3], - mac_data.date[4], - mac_data.date[5], - mac_data.date[6]); - for (i = 0; i < 8; i++) { - sprintf((char *)ethaddr[i], - "%02x:%02x:%02x:%02x:%02x:%02x", - mac_data.mac[i][0], - mac_data.mac[i][1], - mac_data.mac[i][2], - mac_data.mac[i][3], - mac_data.mac[i][4], - mac_data.mac[i][5]); - printf("MAC %d %s\n", i, ethaddr[i]); - } - - setenv("ethaddr", (char *)ethaddr[0]); - setenv("eth1addr", (char *)ethaddr[1]); - setenv("eth2addr", (char *)ethaddr[2]); - setenv("eth3addr", (char *)ethaddr[3]); - - return 0; -} - -int mac_read(void) -{ - int ret, length; - unsigned int crc = 0; - unsigned char dev = ID_EEPROM_ADDR, *data; - - length = sizeof(EEPROM_data); - ret = i2c_read(dev, 0, 1, (unsigned char *)(&mac_data), length); - if (ret) { - printf("Read failed.\n"); - return -1; - } - - data = (unsigned char *)(&mac_data); - printf("Check CRC on reading ..."); - crc = crc32(crc, data, length - 4); - if (crc != mac_data.crc) { - printf("CRC checksum is invalid, in EEPROM CRC is %x, calculated CRC is %x\n", - mac_data.crc, crc); - return -1; - } else { - printf("CRC OK\n"); - mac_show(); - } - return 0; -} - -int mac_prog(void) -{ - int ret, i, length; - unsigned int crc = 0; - unsigned char dev = ID_EEPROM_ADDR, *ptr; - unsigned char *eeprom_data = (unsigned char *)(&mac_data); - - for (i = 0; i < sizeof(mac_data.res_1); i++) - mac_data.res_1[i] = 0; - for (i = 0; i < sizeof(mac_data.res_2); i++) - mac_data.res_2[i] = 0; - length = sizeof(EEPROM_data); - crc = crc32(crc, eeprom_data, length - 4); - mac_data.crc = crc; - for (i = 0, ptr = eeprom_data; i < length; i += 8, ptr += 8) { - ret = - i2c_write(dev, i, 1, ptr, - (length - i) < 8 ? (length - i) : 8); - udelay(5000); /* 5ms write cycle timing */ - if (ret) - break; - } - if (ret) { - printf("Programming failed.\n"); - return -1; - } else { - printf("Programming %d bytes. Reading back ...\n", length); - mac_read(); - } - return 0; -} - -int do_mac(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) -{ - int i; - char cmd = 's'; - unsigned long long mac_val; - - if (i2c_probe(ID_EEPROM_ADDR) != 0) - return -1; - - if (argc > 1) { - cmd = argv[1][0]; - switch (cmd) { - case 'r': /* display */ - mac_read(); - break; - case 's': /* save */ - mac_prog(); - break; - case 'i': /* id */ - for (i = 0; i < 4; i++) { - mac_data.id[i] = argv[2][i]; - } - break; - case 'n': /* serial number */ - for (i = 0; i < 12; i++) { - mac_data.sn[i] = argv[2][i]; - } - break; - case 'e': /* errata */ - for (i = 0; i < 5; i++) { - mac_data.errata[i] = argv[2][i]; - } - break; - case 'd': /* date */ - for (i = 0; i < 7; i++) { - mac_data.date[i] = argv[2][i]; - } - break; - case 'p': /* number of ports */ - mac_data.tab_size = - (unsigned char)simple_strtoul(argv[2], NULL, 16); - break; - case '0': /* mac 0 */ - case '1': /* mac 1 */ - case '2': /* mac 2 */ - case '3': /* mac 3 */ - case '4': /* mac 4 */ - case '5': /* mac 5 */ - case '6': /* mac 6 */ - case '7': /* mac 7 */ - mac_val = simple_strtoull(argv[2], NULL, 16); - for (i = 0; i < 6; i++) { - mac_data.mac[cmd - '0'][i] = - *((unsigned char *) - (((unsigned int)(&mac_val)) + i + 2)); - } - break; - case 'h': /* help */ - default: - printf("Usage:\n%s\n", cmdtp->usage); - break; - } - } else { - mac_show(); - } - return 0; -} - -int mac_read_from_eeprom(void) -{ - int length, i; - unsigned char dev = ID_EEPROM_ADDR; - unsigned char *data; - unsigned char ethaddr[4][18]; - unsigned char enetvar[32]; - unsigned int crc = 0; - - length = sizeof(EEPROM_data); - if (i2c_read(dev, 0, 1, (unsigned char *)(&mac_data), length)) { - printf("Read failed.\n"); - return -1; - } - - data = (unsigned char *)(&mac_data); - crc = crc32(crc, data, length - 4); - if (crc != mac_data.crc) { - return -1; - } else { - for (i = 0; i < 4; i++) { - if (memcmp(&mac_data.mac[i], "\0\0\0\0\0\0", 6)) { - sprintf((char *)ethaddr[i], - "%02x:%02x:%02x:%02x:%02x:%02x", - mac_data.mac[i][0], - mac_data.mac[i][1], - mac_data.mac[i][2], - mac_data.mac[i][3], - mac_data.mac[i][4], - mac_data.mac[i][5]); - sprintf((char *)enetvar, - i ? "eth%daddr" : "ethaddr", - i); - setenv((char *)enetvar, (char *)ethaddr[i]); - } - } - } - return 0; -} -#endif /* CFG_ID_EEPROM */ diff --git a/board/mpc8641hpcn/u-boot.lds b/board/mpc8641hpcn/u-boot.lds deleted file mode 100644 index 58644648c78..00000000000 --- a/board/mpc8641hpcn/u-boot.lds +++ /dev/null @@ -1,136 +0,0 @@ -/* - * Copyright 2006, 2007 Freescale Semiconductor, Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - - /* Read-only sections, merged into text segment: */ - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/mpc86xx/start.o (.text) - board/mpc8641hpcn/init.o (.bootpg) - cpu/mpc86xx/traps.o (.text) - cpu/mpc86xx/interrupts.o (.text) - cpu/mpc86xx/cpu_init.o (.text) - cpu/mpc86xx/cpu.o (.text) - cpu/mpc86xx/speed.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) - drivers/bios_emulator/atibios.o (.text) - *(.text) - *(.fixup) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - *(.eh_frame) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; - __fixup_entries = (. - _FIXUP_TABLE_) >> 2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - _end = . ; - PROVIDE (end = .); -} -- cgit v1.3.1 From ab77bc547ba561c25ea34457ed17aa0b2f7c2723 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Wed, 15 Aug 2007 15:39:17 -0500 Subject: ColdFire: MCF5329 Update and cleanup Signed-off-by: TsiChungLiew --- Makefile | 2 +- board/freescale/m5329evb/mii.c | 8 ++--- board/freescale/m5329evb/nand.c | 2 +- common/cmd_bdinfo.c | 12 +++---- drivers/net/mcffec.c | 10 +++--- include/asm-m68k/immap.h | 2 ++ include/asm-m68k/io.h | 62 ++++++++++++++++++------------------ include/asm-m68k/timer.h | 14 +++++++++ include/configs/M5329EVB.h | 69 +++++++++++++++++++---------------------- lib_m68k/board.c | 2 +- lib_m68k/time.c | 3 +- rtc/mcfrtc.c | 4 +-- 12 files changed, 100 insertions(+), 90 deletions(-) (limited to 'Makefile') diff --git a/Makefile b/Makefile index 2bb11b6f883..79ab40b1a05 100644 --- a/Makefile +++ b/Makefile @@ -1682,7 +1682,7 @@ M5329BFEE_config : unconfig esac; \ >include/config.h ; \ if [ "$${NAND}" != "0" ] ; then \ - echo "#define NANDFLASH_SIZE $${NAND}" >> include/config.h ; \ + echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \ fi @$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale diff --git a/board/freescale/m5329evb/mii.c b/board/freescale/m5329evb/mii.c index 68dc04fd9a9..31f1510cc9f 100644 --- a/board/freescale/m5329evb/mii.c +++ b/board/freescale/m5329evb/mii.c @@ -30,7 +30,7 @@ DECLARE_GLOBAL_DATA_PTR; -#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) +#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) #undef MII_DEBUG #undef ET_DEBUG @@ -50,7 +50,7 @@ int fecpin_setclear(struct eth_device *dev, int setclear) return 0; } -#if defined(CFG_DISCOVER_PHY) || (CONFIG_COMMANDS & CFG_CMD_MII) +#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) #include /* Make MII read/write commands for the FEC. */ @@ -134,7 +134,7 @@ uint mii_send(uint mii_cmd) return (mii_reply & 0xffff); /* data read from phy */ } -#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CFG_CMD_MII) */ +#endif /* CFG_DISCOVER_PHY || CONFIG_CMD_MII */ #if defined(CFG_DISCOVER_PHY) int mii_discover_phy(struct eth_device *dev) @@ -303,4 +303,4 @@ int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, return 0; } -#endif /* CFG_CMD_NET, FEC_ENET & NET_MULTI */ +#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m5329evb/nand.c b/board/freescale/m5329evb/nand.c index 2272a244675..fefb42e614c 100644 --- a/board/freescale/m5329evb/nand.c +++ b/board/freescale/m5329evb/nand.c @@ -31,7 +31,7 @@ DECLARE_GLOBAL_DATA_PTR; -#if (CONFIG_COMMANDS & CFG_CMD_NAND) +#if defined(CONFIG_CMD_NAND) #include #include diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index 58ee9f350f6..889cff8411f 100644 --- a/common/cmd_bdinfo.c +++ b/common/cmd_bdinfo.c @@ -225,7 +225,7 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) #if defined(CFG_MBAR) print_num ("mbar", bd->bi_mbar_base ); #endif -#if defined(CFG_CMD_NET) +#if defined(CONFIG_CMD_NET) puts ("ethaddr ="); for (i=0; i<6; ++i) { printf ("%c%02X", i ? ':' : ' ', bd->bi_enetaddr[i]); @@ -239,22 +239,22 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) #endif #if defined(CONFIG_HAS_ETH2) - puts ("\neth2addr ="); - for (i=0; i<6; ++i) { + puts ("\neth2addr ="); + for (i=0; i<6; ++i) { printf ("%c%02X", i ? ':' : ' ', bd->bi_enet2addr[i]); } #endif #if defined(CONFIG_HAS_ETH3) - puts ("\neth3addr ="); - for (i=0; i<6; ++i) { + puts ("\neth3addr ="); + for (i=0; i<6; ++i) { printf ("%c%02X", i ? ':' : ' ', bd->bi_enet3addr[i]); } #endif puts ("\nip_addr = "); print_IPaddr (bd->bi_ip_addr); -#endif /* CFG_CMD_NET */ +#endif /* CONFIG_CMD_NET */ printf ("\nbaudrate = %d bps\n", bd->bi_baudrate); return 0; diff --git a/drivers/net/mcffec.c b/drivers/net/mcffec.c index fde1aaecb62..68a0ee640d2 100644 --- a/drivers/net/mcffec.c +++ b/drivers/net/mcffec.c @@ -51,7 +51,7 @@ DECLARE_GLOBAL_DATA_PTR; -#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) +#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) struct fec_info_s fec_info[] = { #ifdef CFG_FEC0_IOBASE @@ -410,7 +410,7 @@ int fec_init(struct eth_device *dev, bd_t * bd) fec_reset(dev); -#if (CONFIG_COMMANDS & CFG_CMD_MII) || defined (CONFIG_MII) || \ +#if defined(CONFIG_CMD_MII) || defined (CONFIG_MII) || \ defined (CFG_DISCOVER_PHY) mii_init(); @@ -420,7 +420,7 @@ int fec_init(struct eth_device *dev, bd_t * bd) #ifndef CFG_DISCOVER_PHY setFecDuplexSpeed(fecp, bd, (FECDUPLEX << 16) | FECSPEED); #endif /* ifndef CFG_DISCOVER_PHY */ -#endif /* CFG_CMD_MII || CONFIG_MII */ +#endif /* CONFIG_CMD_MII || CONFIG_MII */ /* We use strictly polling mode only */ fecp->eimr = 0; @@ -568,7 +568,7 @@ int mcffec_initialize(bd_t * bis) eth_register(dev); -#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII) +#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) miiphy_register(dev->name, mcffec_miiphy_read, mcffec_miiphy_write); #endif @@ -580,5 +580,5 @@ int mcffec_initialize(bd_t * bis) return 1; } -#endif /* CFG_CMD_NET, FEC_ENET & NET_MULTI */ +#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ #endif /* CONFIG_MCFFEC */ diff --git a/include/asm-m68k/immap.h b/include/asm-m68k/immap.h index 7c267af56ea..2555e7e8294 100644 --- a/include/asm-m68k/immap.h +++ b/include/asm-m68k/immap.h @@ -38,8 +38,10 @@ #ifdef CONFIG_MCFTMR #define CFG_UDELAY_BASE (MMAP_DTMR0) #define CFG_TMR_BASE (MMAP_DTMR1) +#define CFG_TMRPND_REG (((volatile int0_t *)(CFG_INTR_BASE))->iprh0) #define CFG_TMRINTR_NO (INT0_HI_DTMR1) #define CFG_TMRINTR_MASK (INTC_IPRH_INT33) +#define CFG_TMRINTR_PEND (CFG_TMRINTR_MASK) #define CFG_TMRINTR_PRI (6) #define CFG_TIMER_PRESCALER (((gd->bus_clk / 1000000) - 1) << 8) #endif diff --git a/include/asm-m68k/io.h b/include/asm-m68k/io.h index 114efb15d7e..e14a581dc16 100644 --- a/include/asm-m68k/io.h +++ b/include/asm-m68k/io.h @@ -28,18 +28,18 @@ #include -#define readb(addr) in_8((volatile u8 *)(addr)) -#define writeb(b,addr) out_8((volatile u8 *)(addr), (b)) +#define readb(addr) in_8((volatile u8 *)(addr)) +#define writeb(b,addr) out_8((volatile u8 *)(addr), (b)) #if !defined(__BIG_ENDIAN) -#define readw(addr) (*(volatile u16 *) (addr)) -#define readl(addr) (*(volatile u32 *) (addr)) -#define writew(b,addr) ((*(volatile u16 *) (addr)) = (b)) -#define writel(b,addr) ((*(volatile u32 *) (addr)) = (b)) +#define readw(addr) (*(volatile u16 *) (addr)) +#define readl(addr) (*(volatile u32 *) (addr)) +#define writew(b,addr) ((*(volatile u16 *) (addr)) = (b)) +#define writel(b,addr) ((*(volatile u32 *) (addr)) = (b)) #else -#define readw(addr) in_le16((volatile u16 *)(addr)) -#define readl(addr) in_le32((volatile u32 *)(addr)) -#define writew(b,addr) out_le16((volatile u16 *)(addr),(b)) -#define writel(b,addr) out_le32((volatile u32 *)(addr),(b)) +#define readw(addr) in_le16((volatile u16 *)(addr)) +#define readl(addr) in_le32((volatile u32 *)(addr)) +#define writew(b,addr) out_le16((volatile u16 *)(addr),(b)) +#define writel(b,addr) out_le32((volatile u32 *)(addr),(b)) #endif /* @@ -48,25 +48,25 @@ * are arrays of bytes, and byte-swapping is not appropriate in * that case. - paulus */ -#define insb(port, buf, ns) _insb((u8 *)((port)+_IO_BASE), (buf), (ns)) -#define outsb(port, buf, ns) _outsb((u8 *)((port)+_IO_BASE), (buf), (ns)) -#define insw(port, buf, ns) _insw_ns((u16 *)((port)+_IO_BASE), (buf), (ns)) -#define outsw(port, buf, ns) _outsw_ns((u16 *)((port)+_IO_BASE), (buf), (ns)) -#define insl(port, buf, nl) _insl_ns((u32 *)((port)+_IO_BASE), (buf), (nl)) -#define outsl(port, buf, nl) _outsl_ns((u32 *)((port)+_IO_BASE), (buf), (nl)) - -#define inb(port) in_8((u8 *)((port)+_IO_BASE)) -#define outb(val, port) out_8((u8 *)((port)+_IO_BASE), (val)) +#define insb(port, buf, ns) _insb((u8 *)((port)+_IO_BASE), (buf), (ns)) +#define outsb(port, buf, ns) _outsb((u8 *)((port)+_IO_BASE), (buf), (ns)) +#define insw(port, buf, ns) _insw_ns((u16 *)((port)+_IO_BASE), (buf), (ns)) +#define outsw(port, buf, ns) _outsw_ns((u16 *)((port)+_IO_BASE), (buf), (ns)) +#define insl(port, buf, nl) _insl_ns((u32 *)((port)+_IO_BASE), (buf), (nl)) +#define outsl(port, buf, nl) _outsl_ns((u32 *)((port)+_IO_BASE), (buf), (nl)) + +#define inb(port) in_8((u8 *)((port)+_IO_BASE)) +#define outb(val, port) out_8((u8 *)((port)+_IO_BASE), (val)) #if !defined(__BIG_ENDIAN) -#define inw(port) in_be16((u16 *)((port)+_IO_BASE)) -#define outw(val, port) out_be16((u16 *)((port)+_IO_BASE), (val)) -#define inl(port) in_be32((u32 *)((port)+_IO_BASE)) -#define outl(val, port) out_be32((u32 *)((port)+_IO_BASE), (val)) +#define inw(port) in_be16((u16 *)((port)+_IO_BASE)) +#define outw(val, port) out_be16((u16 *)((port)+_IO_BASE), (val)) +#define inl(port) in_be32((u32 *)((port)+_IO_BASE)) +#define outl(val, port) out_be32((u32 *)((port)+_IO_BASE), (val)) #else -#define inw(port) in_le16((u16 *)((port)+_IO_BASE)) -#define outw(val, port) out_le16((u16 *)((port)+_IO_BASE), (val)) -#define inl(port) in_le32((u32 *)((port)+_IO_BASE)) -#define outl(val, port) out_le32((u32 *)((port)+_IO_BASE), (val)) +#define inw(port) in_le16((u16 *)((port)+_IO_BASE)) +#define outw(val, port) out_le16((u16 *)((port)+_IO_BASE), (val)) +#define inl(port) in_le32((u32 *)((port)+_IO_BASE)) +#define outl(val, port) out_le32((u32 *)((port)+_IO_BASE), (val)) #endif extern inline void _insb(volatile u8 * port, void *buf, int ns) @@ -151,10 +151,10 @@ extern inline void _outsl_ns(volatile u32 * port, const void *buf, int nl) * Neither do the standard versions now, these are just here * for older code. */ -#define insw_ns(port, buf, ns) _insw_ns((u16 *)((port)+_IO_BASE), (buf), (ns)) -#define outsw_ns(port, buf, ns) _outsw_ns((u16 *)((port)+_IO_BASE), (buf), (ns)) -#define insl_ns(port, buf, nl) _insl_ns((u32 *)((port)+_IO_BASE), (buf), (nl)) -#define outsl_ns(port, buf, nl) _outsl_ns((u32 *)((port)+_IO_BASE), (buf), (nl)) +#define insw_ns(port, buf, ns) _insw_ns((u16 *)((port)+_IO_BASE), (buf), (ns)) +#define outsw_ns(port, buf, ns) _outsw_ns((u16 *)((port)+_IO_BASE), (buf), (ns)) +#define insl_ns(port, buf, nl) _insl_ns((u32 *)((port)+_IO_BASE), (buf), (nl)) +#define outsl_ns(port, buf, nl) _outsl_ns((u32 *)((port)+_IO_BASE), (buf), (nl)) #define IO_SPACE_LIMIT ~0 diff --git a/include/asm-m68k/timer.h b/include/asm-m68k/timer.h index d8f4e2a6ac4..3ec710d1f68 100644 --- a/include/asm-m68k/timer.h +++ b/include/asm-m68k/timer.h @@ -33,12 +33,26 @@ /****************************************************************************/ /* DMA Timer module registers */ typedef struct dtimer_ctrl { +#if defined(CONFIG_M5249) || defined(CONFIG_M5253) u16 tmr; /* 0x00 Mode register */ + u16 res1; /* 0x02 */ + u16 trr; /* 0x04 Reference register */ + u16 res2; /* 0x06 */ + u16 tcr; /* 0x08 Capture register */ + u16 res3; /* 0x0A */ + u16 tcn; /* 0x0C Counter register */ + u16 res4; /* 0x0E */ + u8 res6; /* 0x10 */ + u8 ter; /* 0x11 Event register */ + u16 res7; /* 0x12 */ +#else + u16 tmr; /* 0x00 Mode register */ u8 txmr; /* 0x02 Extended Mode register */ u8 ter; /* 0x03 Event register */ u32 trr; /* 0x04 Reference register */ u32 tcr; /* 0x08 Capture register */ u32 tcn; /* 0x0C Counter register */ +#endif } dtmr_t; /*Programmable Interrupt Timer */ diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index 6a7e052a055..d3b160505be 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -47,25 +47,23 @@ #undef CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ -#define DEFAULT_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_CACHE | \ - CFG_CMD_DATE | \ - CFG_CMD_ELF | \ - CFG_CMD_FLASH | \ - CFG_CMD_I2C | \ - (CFG_CMD_LOADB | CFG_CMD_LOADS) | \ - CFG_CMD_MEMORY | \ - CFG_CMD_MISC | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO \ - ) +/* Command line configuration */ +#include + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO #ifdef NANDFLASH_SIZE -# define CONFIG_COMMANDS (DEFAULT_COMMANDS | CFG_CMD_NAND) -#else -# define CONFIG_COMMANDS (DEFAULT_COMMANDS) +# define CONFIG_CMD_NAND #endif #define CFG_UNIFY_CACHE @@ -108,9 +106,9 @@ #define CFG_I2C_OFFSET 0x58000 #define CFG_IMMR CFG_MBAR -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include #define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ +#define CONFIG_UDP_CHECKSUM + #ifdef CONFIG_MCFFEC # define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 # define CONFIG_IPADDR 192.162.1.2 @@ -137,7 +135,7 @@ #define CFG_PROMPT "-> " #define CFG_LONGHELP /* undef to save memory */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#ifdef CONFIG_CMD_KGDB # define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else # define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -154,7 +152,7 @@ #define CFG_MBAR 0xFC000000 -#define CFG_LATCH_ADDR (CFG_CS1_BASE + 0x80000) +#define CFG_LATCH_ADDR (CFG_CS1_BASE + 0x80000) /* * Low Level Configuration Settings @@ -168,7 +166,7 @@ #define CFG_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */ #define CFG_INIT_RAM_CTRL 0x221 #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_GBL_DATA_OFFSET ((CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) - 0x10) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET /*----------------------------------------------------------------------- @@ -198,7 +196,7 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) /*----------------------------------------------------------------------- * FLASH organization @@ -214,20 +212,19 @@ #endif #ifdef NANDFLASH_SIZE -# define CFG_MAX_NAND_DEVICE 1 -# define CFG_NAND_BASE (CFG_CS2_BASE << 16) -# define CFG_NAND_SIZE 1 -# define CFG_NAND_BASE_LIST { CFG_NAND_BASE } -# define NAND_MAX_CHIPS 1 -# define NAND_ALLOW_ERASE_ALL 1 -# define CONFIG_JFFS2_NAND 1 -# define CONFIG_JFFS2_DEV "nand0" -# define CONFIG_JFFS2_PART_SIZE (CFG_CS2_MASK & ~1) -# define CONFIG_JFFS2_PART_OFFSET 0x00000000 +# define CFG_MAX_NAND_DEVICE 1 +# define CFG_NAND_BASE (CFG_CS2_BASE << 16) +# define CFG_NAND_SIZE 1 +# define CFG_NAND_BASE_LIST { CFG_NAND_BASE } +# define NAND_MAX_CHIPS 1 +# define NAND_ALLOW_ERASE_ALL 1 +# define CONFIG_JFFS2_NAND 1 +# define CONFIG_JFFS2_DEV "nand0" +# define CONFIG_JFFS2_PART_SIZE (CFG_CS2_MASK & ~1) +# define CONFIG_JFFS2_PART_OFFSET 0x00000000 #endif -#define CFG_FLASH_BASE 0 -#define CFG_FLASH0_BASE (CFG_CS0_BASE << 16) +#define CFG_FLASH_BASE (CFG_CS0_BASE << 16) /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash @@ -267,6 +264,4 @@ #define CFG_CS2_CTRL 0x00001f60 #endif -#define CONFIG_UDP_CHECKSUM - #endif /* _M5329EVB_H */ diff --git a/lib_m68k/board.c b/lib_m68k/board.c index 395018c41f9..778ec788a81 100644 --- a/lib_m68k/board.c +++ b/lib_m68k/board.c @@ -692,7 +692,7 @@ void board_init_r (gd_t *id, ulong dest_addr) #endif #if defined(CONFIG_NET_MULTI) puts ("Net: "); - eth_initialize (bd); + eth_initialize (bd); #endif #endif diff --git a/lib_m68k/time.c b/lib_m68k/time.c index 3dbce07213e..6c19059e62b 100644 --- a/lib_m68k/time.c +++ b/lib_m68k/time.c @@ -347,10 +347,9 @@ void udelay(unsigned long usec) void dtimer_interrupt(void *not_used) { volatile dtmr_t *timerp = (dtmr_t *) (CFG_TMR_BASE); - volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE); /* check for timer interrupt asserted */ - if ((intp->iprh0 & CFG_TMRINTR_MASK) == CFG_TMRINTR_MASK) { + if ((CFG_TMRPND_REG & CFG_TMRINTR_MASK) == CFG_TMRINTR_PEND) { timerp->ter = (DTIM_DTER_CAP | DTIM_DTER_REF); timestamp++; return; diff --git a/rtc/mcfrtc.c b/rtc/mcfrtc.c index 0be587426c0..76bb5107f6a 100644 --- a/rtc/mcfrtc.c +++ b/rtc/mcfrtc.c @@ -28,7 +28,7 @@ #include #include -#if defined(CONFIG_MCFRTC) && (CONFIG_COMMANDS & CFG_CMD_DATE) +#if defined(CONFIG_MCFRTC) && defined(CONFIG_CMD_DATE) #undef RTC_DEBUG @@ -118,4 +118,4 @@ void rtc_reset(void) rtc->cr |= RTC_CR_SWR; } -#endif /* CONFIG_MCFRTC && CFG_CMD_DATE */ +#endif /* CONFIG_MCFRTC && CONFIG_CMD_DATE */ -- cgit v1.3.1 From a605aacd8324094199402816cc6d9124aba57b8d Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 16 Aug 2007 05:04:31 -0500 Subject: ColdFire: Add M5249EVB platform for MCF52x2 Signed-off-by: TsiChungLiew --- Makefile | 3 + board/freescale/m5249evb/Makefile | 44 ++++++++ board/freescale/m5249evb/config.mk | 25 +++++ board/freescale/m5249evb/m5249evb.c | 114 +++++++++++++++++++++ board/freescale/m5249evb/u-boot.lds | 146 +++++++++++++++++++++++++++ include/configs/M5249EVB.h | 195 ++++++++++++++++++++++++++++++++++++ 6 files changed, 527 insertions(+) create mode 100644 board/freescale/m5249evb/Makefile create mode 100644 board/freescale/m5249evb/config.mk create mode 100644 board/freescale/m5249evb/m5249evb.c create mode 100644 board/freescale/m5249evb/u-boot.lds create mode 100644 include/configs/M5249EVB.h (limited to 'Makefile') diff --git a/Makefile b/Makefile index 79ab40b1a05..af49438b439 100644 --- a/Makefile +++ b/Makefile @@ -1639,6 +1639,9 @@ ZPC1900_config: unconfig ## Coldfire ######################################################################### +M5249EVB_config : unconfig + @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale + cobra5272_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272 diff --git a/board/freescale/m5249evb/Makefile b/board/freescale/m5249evb/Makefile new file mode 100644 index 00000000000..424ab1cf9e3 --- /dev/null +++ b/board/freescale/m5249evb/Makefile @@ -0,0 +1,44 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/m5249evb/config.mk b/board/freescale/m5249evb/config.mk new file mode 100644 index 00000000000..ccb2cf735df --- /dev/null +++ b/board/freescale/m5249evb/config.mk @@ -0,0 +1,25 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Coldfire contribution by Bernhard Kuhn +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0xffe00000 diff --git a/board/freescale/m5249evb/m5249evb.c b/board/freescale/m5249evb/m5249evb.c new file mode 100644 index 00000000000..b0bf4139429 --- /dev/null +++ b/board/freescale/m5249evb/m5249evb.c @@ -0,0 +1,114 @@ +/* + * (C) Copyright 2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include + + +/* Prototypes */ +int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); + +int checkboard (void) { + ulong val; + uchar val8; + + puts ("Board: "); + puts("Freescale M5249EVB"); + val8 = ((uchar)~((uchar)mbar2_readLong(MCFSIM_GPIO1_READ) >> 4)) & 0xf; + printf(" (Switch=%1X)\n", val8); + + /* + * Set LED on + */ + val = mbar2_readLong(MCFSIM_GPIO1_OUT) & ~CFG_GPIO1_LED; + mbar2_writeLong(MCFSIM_GPIO1_OUT, val); /* Set LED on */ + + return 0; +}; + + +long int initdram (int board_type) { + unsigned long junk = 0xa5a59696; + + /* + * Note: + * RC = ([(RefreshTime/#rows) / (1/BusClk)] / 16) - 1 + */ + +#ifdef CFG_FAST_CLK + /* + * Busclk=70MHz, RefreshTime=64ms, #rows=4096 (4K) + * SO=1, NAM=0, COC=0, RTIM=01 (6clk refresh), RC=39 + */ + mbar_writeShort(MCFSIM_DCR, 0x8239); +#elif CFG_PLL_BYPASS + /* + * Busclk=5.6448MHz, RefreshTime=64ms, #rows=8192 (8K) + * SO=1, NAM=0, COC=0, RTIM=01 (6clk refresh), RC=02 + */ + mbar_writeShort(MCFSIM_DCR, 0x8202); +#else + /* + * Busclk=36MHz, RefreshTime=64ms, #rows=4096 (4K) + * SO=1, NAM=0, COC=0, RTIM=01 (6clk refresh), RC=22 (562 bus clock cycles) + */ + mbar_writeShort(MCFSIM_DCR, 0x8222); +#endif + + /* + * SDRAM starts at 0x0000_0000, CASL=10, CBM=010, PS=10 (16bit port), + * PM=1 (continuous page mode) + */ + + /* RE=0 (keep auto-refresh disabled while setting up registers) */ + mbar_writeLong(MCFSIM_DACR0, 0x00003324); + + /* BAM=007c (bits 22,21 are bank selects; 256kB blocks) */ + mbar_writeLong(MCFSIM_DMR0, 0x01fc0001); + + /** Precharge sequence **/ + mbar_writeLong(MCFSIM_DACR0, 0x0000332c); /* Set DACR0[IP] (bit 3) */ + *((volatile unsigned long *) 0x00) = junk; /* write to a memory location to init. precharge */ + udelay(0x10); /* Allow several Precharge cycles */ + + /** Refresh Sequence **/ + mbar_writeLong(MCFSIM_DACR0, 0x0000b324); /* Enable the refresh bit, DACR0[RE] (bit 15) */ + udelay(0x7d0); /* Allow gobs of refresh cycles */ + + /** Mode Register initialization **/ + mbar_writeLong(MCFSIM_DACR0, 0x0000b364); /* Enable DACR0[IMRS] (bit 6); RE remains enabled */ + *((volatile unsigned long *) 0x800) = junk; /* Access RAM to initialize the mode register */ + + return CFG_SDRAM_SIZE * 1024 * 1024; +}; + + +int testdram (void) { + /* TODO: XXX XXX XXX */ + printf ("DRAM test not implemented!\n"); + + return (0); +} + diff --git a/board/freescale/m5249evb/u-boot.lds b/board/freescale/m5249evb/u-boot.lds new file mode 100644 index 00000000000..a803b1cbadc --- /dev/null +++ b/board/freescale/m5249evb/u-boot.lds @@ -0,0 +1,146 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mcf52x2/start.o (.text) + lib_m68k/traps.o (.text) + cpu/mcf52x2/interrupts.o (.text) + common/dlmalloc.o (.text) + lib_generic/zlib.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + __got_start = .; + *(.got) + __got_end = .; + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + _sbss = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + _end = . ; + PROVIDE (end = .); +} diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h new file mode 100644 index 00000000000..b300b68bcfa --- /dev/null +++ b/include/configs/M5249EVB.h @@ -0,0 +1,195 @@ +/* + * Configuation settings for the esd TASREG board. + * + * (C) Copyright 2004 + * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef _M5249EVB_H +#define _M5249EVB_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_MCF52x2 /* define processor family */ +#define CONFIG_M5249 /* define processor type */ + +#define CONFIG_MCFTMR + +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) +#define CONFIG_BAUDRATE 19200 +#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } + +#undef CONFIG_WATCHDOG + +#undef CONFIG_MONITOR_IS_IN_RAM /* no pre-loader required!!! ;-) */ + +/* + * BOOTP options + */ +#undef CONFIG_BOOTP_BOOTFILESIZE +#undef CONFIG_BOOTP_BOOTPATH +#undef CONFIG_BOOTP_GATEWAY +#undef CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include +#undef CONFIG_CMD_NET + +#define CFG_PROMPT "=> " +#define CFG_LONGHELP /* undef to save memory */ + +#if defined(CONFIG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_DEVICE_NULLDEV 1 /* include nulldev device */ +#define CFG_CONSOLE_INFO_QUIET 1 /* don't print console @ startup */ +#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ + +#define CFG_LOAD_ADDR 0x200000 /* default load address */ + +#define CFG_MEMTEST_START 0x400 +#define CFG_MEMTEST_END 0x380000 + +#define CFG_HZ 1000 + +/* + * Clock configuration: enable only one of the following options + */ + +#undef CFG_PLL_BYPASS /* bypass PLL for test purpose */ +#define CFG_FAST_CLK 1 /* MCF5249 can run at 140MHz */ +#define CFG_CLK 132025600 /* MCF5249 can run at 140MHz */ + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ + +#define CFG_MBAR 0x10000000 /* Register Base Addrs */ +#define CFG_MBAR2 0x80000000 + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR 0x20000000 +#define CFG_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ +#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_OFFSET 0x4000 /* Address of Environment Sector*/ +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ +#define CFG_ENV_SECT_SIZE 0x2000 /* see README - env sector total size */ + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ +#define CFG_FLASH_BASE (CFG_CSAR0 << 16) + +#if 0 /* test-only */ +#define CONFIG_PRAM 512 /* test-only for SDRAM problem!!!!!!!!!!!!!!!!!!!! */ +#endif + +#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) + +#define CFG_MONITOR_LEN 0x20000 +#define CFG_MALLOC_LEN (1 * 1024*1024) /* Reserve 1 MB for malloc() */ +#define CFG_BOOTPARAMS_LEN 64*1024 + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization ?? + */ +#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_FLASH_CFI +#ifdef CFG_FLASH_CFI + +# define CFG_FLASH_CFI_DRIVER 1 +# define CFG_FLASH_SIZE 0x1000000 /* Max size that the board might have */ +# define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT +# define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +# define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ +# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ +# define CFG_FLASH_CHECKSUM +# define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#endif + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 + +/*----------------------------------------------------------------------- + * Memory bank definitions + */ + +/* CS0 - AMD Flash, address 0xffc00000 */ +#define CFG_CSAR0 0xffe0 +#define CFG_CSCR0 0x1980 /* WS=0110, AA=1, PS=10 */ +/** Note: There is a CSMR0/DRAM vector problem, need to disable C/I ***/ +#define CFG_CSMR0 0x003f0021 /* 4MB, AA=0, WP=0, C/I=1, V=1 */ + +/* CS1 - FPGA, address 0xe0000000 */ +#define CFG_CSAR1 0xe000 +#define CFG_CSCR1 0x0d80 /* WS=0011, AA=1, PS=10 */ +#define CFG_CSMR1 0x00010001 /* 128kB, AA=0, WP=0, C/I=0, V=1*/ + +/*----------------------------------------------------------------------- + * Port configuration + */ +#define CFG_GPIO_FUNC 0x00000008 /* Set gpio pins: none */ +#define CFG_GPIO1_FUNC 0x00df00f0 /* 36-39(SWITCH),48-52(FPGAs),54*/ +#define CFG_GPIO_EN 0x00000008 /* Set gpio output enable */ +#define CFG_GPIO1_EN 0x00c70000 /* Set gpio output enable */ +#define CFG_GPIO_OUT 0x00000008 /* Set outputs to default state */ +#define CFG_GPIO1_OUT 0x00c70000 /* Set outputs to default state */ +#define CFG_GPIO1_LED 0x00400000 /* user led */ + +#endif /* M5249 */ + -- cgit v1.3.1 From a1436a842654a8d3927d082a8ae9ee0a10da62d7 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 16 Aug 2007 13:20:50 -0500 Subject: ColdFire: Add M5253EVBE platform for MCF52x2 Signed-off-by: TsiChungLiew --- CREDITS | 5 + MAKEALL | 2 + Makefile | 3 + board/freescale/m5253evbe/Makefile | 44 +++++++ board/freescale/m5253evbe/config.mk | 25 ++++ board/freescale/m5253evbe/m5253evbe.c | 133 +++++++++++++++++++++ board/freescale/m5253evbe/u-boot.lds | 144 +++++++++++++++++++++++ cpu/mcf52x2/cpu.c | 32 ++++- cpu/mcf52x2/cpu_init.c | 92 +++++++++++---- cpu/mcf52x2/interrupts.c | 13 +-- cpu/mcf52x2/speed.c | 35 +++++- cpu/mcf52x2/start.S | 6 +- doc/README.m5253evbe | 103 ++++++++++++++++ include/asm-m68k/immap.h | 25 +++- include/asm-m68k/immap_5253.h | 95 +++++++++++++++ include/asm-m68k/m5253.h | 73 ++++++++++++ include/configs/M5253EVBE.h | 213 ++++++++++++++++++++++++++++++++++ lib_m68k/interrupts.c | 2 - 18 files changed, 1010 insertions(+), 35 deletions(-) create mode 100644 board/freescale/m5253evbe/Makefile create mode 100644 board/freescale/m5253evbe/config.mk create mode 100644 board/freescale/m5253evbe/m5253evbe.c create mode 100644 board/freescale/m5253evbe/u-boot.lds create mode 100644 doc/README.m5253evbe create mode 100644 include/asm-m68k/immap_5253.h create mode 100644 include/asm-m68k/m5253.h create mode 100644 include/configs/M5253EVBE.h mode change 100644 => 100755 lib_m68k/interrupts.c (limited to 'Makefile') diff --git a/CREDITS b/CREDITS index b31125b6892..b1abad32a21 100644 --- a/CREDITS +++ b/CREDITS @@ -494,3 +494,8 @@ E: Tsi-Chung.Liew@freescale.com D: Support for ColdFire MCF532x W: www.freescale.com +N: Hayden Fraser +E: Hayden.Fraser@freescale.com +D: Support for ColdFire MCF5253 +W: www.freescale.com + diff --git a/MAKEALL b/MAKEALL index 4467d7570b5..890ee39a78f 100755 --- a/MAKEALL +++ b/MAKEALL @@ -618,6 +618,8 @@ LIST_coldfire=" \ EB+MCF-EV123 \ EB+MCF-EV123_internal \ idmr \ + M5249EVB \ + M5253EVB \ M5271EVB \ M5272C3 \ M5282EVB \ diff --git a/Makefile b/Makefile index af49438b439..e5995ebfc40 100644 --- a/Makefile +++ b/Makefile @@ -1642,6 +1642,9 @@ ZPC1900_config: unconfig M5249EVB_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale +M5253EVBE_config : unconfig + @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253evbe freescale + cobra5272_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272 diff --git a/board/freescale/m5253evbe/Makefile b/board/freescale/m5253evbe/Makefile new file mode 100644 index 00000000000..424ab1cf9e3 --- /dev/null +++ b/board/freescale/m5253evbe/Makefile @@ -0,0 +1,44 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/m5253evbe/config.mk b/board/freescale/m5253evbe/config.mk new file mode 100644 index 00000000000..ccb2cf735df --- /dev/null +++ b/board/freescale/m5253evbe/config.mk @@ -0,0 +1,25 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Coldfire contribution by Bernhard Kuhn +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0xffe00000 diff --git a/board/freescale/m5253evbe/m5253evbe.c b/board/freescale/m5253evbe/m5253evbe.c new file mode 100644 index 00000000000..67fab5b0209 --- /dev/null +++ b/board/freescale/m5253evbe/m5253evbe.c @@ -0,0 +1,133 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * Hayden Fraser (Hayden.Fraser@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +int checkboard(void) +{ + puts("Board: "); + puts("Freescale MCF5253 EVBE\n"); + return 0; +}; + +long int initdram(int board_type) +{ + int i; + + /* + * Check to see if the SDRAM has already been initialized + * by a run control tool + */ + if (!(mbar_readLong(MCFSIM_DCR) & 0x8000)) { + u32 RC, dramsize; + + RC = (CFG_CLK / 1000000) >> 1; + RC = (RC * 15) >> 4; + + /* Initialize DRAM Control Register: DCR */ + mbar_writeShort(MCFSIM_DCR, (0x8400 | RC)); + + mbar_writeLong(MCFSIM_DACR0, 0x00003224); + + /* Initialize DMR0 */ + dramsize = ((CFG_SDRAM_SIZE << 20) - 1) & 0xFFFC0000; + mbar_writeLong(MCFSIM_DMR0, dramsize | 1); + + mbar_writeLong(MCFSIM_DACR0, 0x0000322c); + + /* Write to this block to initiate precharge */ + *(u32 *) (CFG_SDRAM_BASE) = 0xa5a5a5a5; + + /* Set RE bit in DACR */ + mbar_writeLong(MCFSIM_DACR0, + mbar_readLong(MCFSIM_DACR0) | 0x8000); + + /* Wait for at least 8 auto refresh cycles to occur */ + udelay(500); + + /* Finish the configuration by issuing the MRS */ + mbar_writeLong(MCFSIM_DACR0, + mbar_readLong(MCFSIM_DACR0) | 0x0040); + + *(u32 *) (CFG_SDRAM_BASE + 0x800) = 0xa5a5a5a5; + } + + return CFG_SDRAM_SIZE * 1024 * 1024; +} + +int testdram(void) +{ + /* TODO: XXX XXX XXX */ + printf("DRAM test not implemented!\n"); + + return (0); +} + +#ifdef CONFIG_CMD_IDE +#include +int ide_preinit(void) +{ + return (0); +} + +void ide_set_reset(int idereset) +{ + volatile atac_t *ata = (atac_t *) CFG_ATA_BASE_ADDR; + long period; + /* t1, t2, t3, t4, t5, t6, t9, tRD, tA */ + int piotms[5][9] = { {70, 165, 60, 30, 50, 5, 20, 0, 35}, /* PIO 0 */ + {50, 125, 45, 20, 35, 5, 15, 0, 35}, /* PIO 1 */ + {30, 100, 30, 15, 20, 5, 10, 0, 35}, /* PIO 2 */ + {30, 80, 30, 10, 20, 5, 10, 0, 35}, /* PIO 3 */ + {25, 70, 20, 10, 20, 5, 10, 0, 35} /* PIO 4 */ + }; + + if (idereset) { + ata->cr = 0; /* control reset */ + udelay(100); + } else { + mbar2_writeLong(CIM_MISCCR, CIM_MISCCR_CPUEND); + +#define CALC_TIMING(t) (t + period - 1) / period + period = 1000000000 / (CFG_CLK / 2); /* period in ns */ + + /*ata->ton = CALC_TIMING (180); */ + ata->t1 = CALC_TIMING(piotms[2][0]); + ata->t2w = CALC_TIMING(piotms[2][1]); + ata->t2r = CALC_TIMING(piotms[2][1]); + ata->ta = CALC_TIMING(piotms[2][8]); + ata->trd = CALC_TIMING(piotms[2][7]); + ata->t4 = CALC_TIMING(piotms[2][3]); + ata->t9 = CALC_TIMING(piotms[2][6]); + + ata->cr = 0x40; /* IORDY enable */ + udelay(2000); + ata->cr |= 0x01; /* IORDY enable */ + } +} +#endif /* CONFIG_CMD_IDE */ + diff --git a/board/freescale/m5253evbe/u-boot.lds b/board/freescale/m5253evbe/u-boot.lds new file mode 100644 index 00000000000..e2fd0708d58 --- /dev/null +++ b/board/freescale/m5253evbe/u-boot.lds @@ -0,0 +1,144 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mcf52x2/start.o (.text) + lib_m68k/traps.o (.text) + cpu/mcf52x2/interrupts.o (.text) + common/dlmalloc.o (.text) + lib_generic/zlib.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + __got_start = .; + *(.got) + __got_end = .; + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + _sbss = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + _end = . ; + PROVIDE (end = .); +} diff --git a/cpu/mcf52x2/cpu.c b/cpu/mcf52x2/cpu.c index 96fe3711bb5..71ea408aa5e 100644 --- a/cpu/mcf52x2/cpu.c +++ b/cpu/mcf52x2/cpu.c @@ -205,7 +205,7 @@ int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[]) }; #endif -#ifdef CONFIG_M5249 /* test-only: todo... */ +#ifdef CONFIG_M5249 int checkcpu(void) { char buf[32]; @@ -225,3 +225,33 @@ int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[]) return 0; }; #endif + +#ifdef CONFIG_M5253 +int checkcpu(void) +{ + char buf[32]; + + unsigned char resetsource = mbar_readLong(SIM_RSR); + printf("CPU: Freescale Coldfire MCF5253 at %s MHz\n", + strmhz(buf, CFG_CLK)); + + if ((resetsource & SIM_RSR_HRST) || (resetsource & SIM_RSR_SWTR)) { + printf("Reset:%s%s\n", + (resetsource & SIM_RSR_HRST) ? " Hardware/ System Reset" + : "", + (resetsource & SIM_RSR_SWTR) ? " Software Watchdog" : + ""); + } + return 0; +} + +int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[]) +{ + /* enable watchdog, set timeout to 0 and wait */ + mbar_writeByte(SIM_SYPCR, 0xc0); + while (1) ; + + /* we don't return! */ + return 0; +}; +#endif diff --git a/cpu/mcf52x2/cpu_init.c b/cpu/mcf52x2/cpu_init.c index 5736d0f26c1..f41d77bc599 100644 --- a/cpu/mcf52x2/cpu_init.c +++ b/cpu/mcf52x2/cpu_init.c @@ -6,6 +6,10 @@ * (C) Copyright 2005 * BuS Elektronik GmbH & Co. KG * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * Hayden Fraser (Hayden.Fraser@freescale.com) + * * See file CREDITS for list of people who contributed to this * project. * @@ -29,6 +33,74 @@ #include #include +#if defined(CONFIG_M5253) +/* + * Breath some life into the CPU... + * + * Set up the memory map, + * initialize a bunch of registers, + * initialize the UPM's + */ +void cpu_init_f(void) +{ + mbar_writeByte(MCFSIM_MPARK, 0x40); /* 5249 Internal Core takes priority over DMA */ + mbar_writeByte(MCFSIM_SYPCR, 0x00); + mbar_writeByte(MCFSIM_SWIVR, 0x0f); + mbar_writeByte(MCFSIM_SWSR, 0x00); + mbar_writeByte(MCFSIM_SWDICR, 0x00); + mbar_writeByte(MCFSIM_TIMER1ICR, 0x00); + mbar_writeByte(MCFSIM_TIMER2ICR, 0x88); + mbar_writeByte(MCFSIM_I2CICR, 0x00); + mbar_writeByte(MCFSIM_UART1ICR, 0x00); + mbar_writeByte(MCFSIM_UART2ICR, 0x00); + mbar_writeByte(MCFSIM_ICR6, 0x00); + mbar_writeByte(MCFSIM_ICR7, 0x00); + mbar_writeByte(MCFSIM_ICR8, 0x00); + mbar_writeByte(MCFSIM_ICR9, 0x00); + mbar_writeByte(MCFSIM_QSPIICR, 0x00); + + mbar2_writeLong(MCFSIM_GPIO_INT_EN, 0x00000080); + mbar2_writeByte(MCFSIM_INTBASE, 0x40); /* Base interrupts at 64 */ + mbar2_writeByte(MCFSIM_SPURVEC, 0x00); + + /*mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020); *//* Enable a 1 cycle pre-drive cycle on CS1 */ + + /* + * Setup chip selects... + */ + + mbar_writeShort(MCFSIM_CSAR1, CFG_CSAR1); + mbar_writeShort(MCFSIM_CSCR1, CFG_CSCR1); + mbar_writeLong(MCFSIM_CSMR1, CFG_CSMR1); + + mbar_writeShort(MCFSIM_CSAR0, CFG_CSAR0); + mbar_writeShort(MCFSIM_CSCR0, CFG_CSCR0); + mbar_writeLong(MCFSIM_CSMR0, CFG_CSMR0); + + /* enable instruction cache now */ + icache_enable(); +} + +/*initialize higher level parts of CPU like timers */ +int cpu_init_r(void) +{ + return (0); +} + +void uart_port_conf(void) +{ + /* Setup Ports: */ + switch (CFG_UART_PORT) { + case 0: + break; + case 1: + break; + case 2: + break; + } +} +#endif /* #if defined(CONFIG_M5253) */ + #if defined(CONFIG_M5271) void cpu_init_f(void) { @@ -394,26 +466,6 @@ void uart_port_conf(void) */ void cpu_init_f(void) { -#ifndef CFG_PLL_BYPASS - /* - * Setup the PLL to run at the specified speed - * - */ - volatile unsigned long cpll = mbar2_readLong(MCFSIM_PLLCR); - unsigned long pllcr; -#ifdef CFG_FAST_CLK - pllcr = 0x925a3100; /* ~140MHz clock (PLL bypass = 0) */ -#else - pllcr = 0x135a4140; /* ~72MHz clock (PLL bypass = 0) */ -#endif - cpll = cpll & 0xfffffffe; /* Set PLL bypass mode = 0 (PSTCLK = crystal) */ - mbar2_writeLong(MCFSIM_PLLCR, cpll); /* Set the PLL to bypass mode (PSTCLK = crystal) */ - mbar2_writeLong(MCFSIM_PLLCR, pllcr); /* set the clock speed */ - pllcr ^= 0x00000001; /* Set pll bypass to 1 */ - mbar2_writeLong(MCFSIM_PLLCR, pllcr); /* Start locking (pll bypass = 1) */ - udelay(0x20); /* Wait for a lock ... */ -#endif /* #ifndef CFG_PLL_BYPASS */ - /* * NOTE: by setting the GPIO_FUNCTION registers, we ensure that the UART pins * (UART0: gpio 30,27, UART1: gpio 31, 28) will be used as UART pins diff --git a/cpu/mcf52x2/interrupts.c b/cpu/mcf52x2/interrupts.c index d9a35bb8c97..2ccbde587e5 100644 --- a/cpu/mcf52x2/interrupts.c +++ b/cpu/mcf52x2/interrupts.c @@ -1,9 +1,10 @@ /* - * (C) Copyright 2003 Josef Baumgartner - * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * * See file CREDITS for list of people who contributed to this * project. * @@ -82,7 +83,7 @@ void dtimer_intr_setup(void) #endif /* CONFIG_MCFTMR */ #endif /* CONFIG_M5282 | CONFIG_M5271 */ -#ifdef CONFIG_M5249 +#if defined(CONFIG_M5249) || defined(CONFIG_M5253) int interrupt_init(void) { enable_interrupts(); @@ -94,9 +95,7 @@ int interrupt_init(void) void dtimer_intr_setup(void) { mbar_writeLong(MCFSIM_IMR, mbar_readLong(MCFSIM_IMR) & ~0x00000400); - mbar_writeByte(MCFSIM_TIMER2ICR, - MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | - MCFSIM_ICR_PRI3); + mbar_writeByte(MCFSIM_TIMER2ICR, CFG_TMRINTR_PRI); } #endif /* CONFIG_MCFTMR */ -#endif /* CONFIG_M5249 */ +#endif /* CONFIG_M5249 || CONFIG_M5253 */ diff --git a/cpu/mcf52x2/speed.c b/cpu/mcf52x2/speed.c index ac860b2c673..bc1e20023b1 100644 --- a/cpu/mcf52x2/speed.c +++ b/cpu/mcf52x2/speed.c @@ -2,6 +2,9 @@ * (C) Copyright 2003 * Josef Baumgartner * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * Hayden Fraser (Hayden.Fraser@freescale.com) + * * See file CREDITS for list of people who contributed to this * project. * @@ -23,6 +26,7 @@ #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -31,8 +35,37 @@ DECLARE_GLOBAL_DATA_PTR; */ int get_clocks (void) { - gd->cpu_clk = CFG_CLK; +#if defined(CONFIG_M5249) || defined(CONFIG_M5253) + volatile unsigned long cpll = mbar2_readLong(MCFSIM_PLLCR); + unsigned long pllcr; + +#ifndef CFG_PLL_BYPASS + #ifdef CONFIG_M5249 + /* Setup the PLL to run at the specified speed */ +#ifdef CFG_FAST_CLK + pllcr = 0x925a3100; /* ~140MHz clock (PLL bypass = 0) */ +#else + pllcr = 0x135a4140; /* ~72MHz clock (PLL bypass = 0) */ +#endif +#endif /* CONFIG_M5249 */ + +#ifdef CONFIG_M5253 + pllcr = CFG_PLLCR; +#endif /* CONFIG_M5253 */ + + cpll = cpll & 0xfffffffe; /* Set PLL bypass mode = 0 (PSTCLK = crystal) */ + mbar2_writeLong(MCFSIM_PLLCR, cpll); /* Set the PLL to bypass mode (PSTCLK = crystal) */ + mbar2_writeLong(MCFSIM_PLLCR, pllcr); /* set the clock speed */ + pllcr ^= 0x00000001; /* Set pll bypass to 1 */ + mbar2_writeLong(MCFSIM_PLLCR, pllcr); /* Start locking (pll bypass = 1) */ + udelay(0x20); /* Wait for a lock ... */ +#endif /* #ifndef CFG_PLL_BYPASS */ + +#endif /* CONFIG_M5249 || CONFIG_M5253 */ + + gd->cpu_clk = CFG_CLK; +#if defined(CONFIG_M5249) || defined(CONFIG_M5253) gd->bus_clk = gd->cpu_clk / 2; #else gd->bus_clk = gd->cpu_clk; diff --git a/cpu/mcf52x2/start.S b/cpu/mcf52x2/start.S index 6783d4d94c4..686e2a53330 100644 --- a/cpu/mcf52x2/start.S +++ b/cpu/mcf52x2/start.S @@ -121,7 +121,7 @@ _start: nop move.w #0x2700,%sr -#if defined(CONFIG_M5272) || defined(CONFIG_M5249) +#if defined(CONFIG_M5272) || defined(CONFIG_M5249) || defined(CONFIG_M5253) move.l #(CFG_MBAR + 1), %d0 /* set MBAR address + valid flag */ move.c %d0, %MBAR @@ -133,7 +133,7 @@ _start: move.l #(CFG_INIT_RAM_ADDR + 1), %d0 movec %d0, %RAMBAR0 -#endif /* #if defined(CONFIG_M5272) || defined(CONFIG_M5249) */ +#endif /* CONFIG_M5272 || CONFIG_M5249 || CONFIG_M5253 */ #if defined(CONFIG_M5282) || defined(CONFIG_M5271) /* Initialize IPSBAR */ @@ -407,7 +407,7 @@ icache_state_access_1: rts #endif -#ifdef CONFIG_M5249 +#if defined(CONFIG_M5249) || defined(CONFIG_M5253) .globl icache_enable icache_enable: /* diff --git a/doc/README.m5253evbe b/doc/README.m5253evbe new file mode 100644 index 00000000000..7f2afcf156b --- /dev/null +++ b/doc/README.m5253evbe @@ -0,0 +1,103 @@ +Freescale Amadeus Plus M5253EVBE board +====================================== + +Hayden Fraser(Hayden.Fraser@freescale.com) +Created 06/05/2007 +=========================================== + + +1. SWITCH SETTINGS +================== +1.1 N/A + + +2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL +=========================================== +2.1. For the initial bringup, we adopted a consistent memory scheme between u-boot and + linux kernel, you can customize it based on your system requirements: + SDR: 0x00000000-0x00ffffff + SRAM0: 0x20010000-0x20017fff + SRAM1: 0x20000000-0x2000ffff + MBAR1: 0x10000000-0x4fffffff + MBAR2: 0x80000000-0xCfffffff + Flash: 0xffe00000-0xffffffff + +3. DEFINITIONS AND COMPILATION +============================== +3.1 Explanation on NEW definitions in include/configs/M5253EVBE.h + CONFIG_MCF52x2 Processor family + CONFIG_MCF5253 MCF5253 specific + CONFIG_M5253EVBE Amadeus Plus board specific + CFG_CLK Define Amadeus Plus CPU Clock + CFG_MBAR MBAR base address + CFG_MBAR2 MBAR2 base address + +3.2 Compilation + export CROSS_COMPILE=/usr/local/freescale-coldfire-4.1-elf/bin/m68k-elf- + cd u-boot-1-2-x + make distclean + make M5253EVBE_config + make + + +4. SCREEN DUMP +============== +4.1 U-Boot 1.2.0 (Jun 18 2007 - 18:20:00) + +CPU: Freescale Coldfire MCF5253 at 62 MHz +Board: Freescale MCF5253 EVBE +DRAM: 16 MB +FLASH: 2 MB +In: serial +Out: serial +Err: serial +=> flinfo + +Bank # 1: CFI conformant FLASH (16 x 16) Size: 2 MB in 35 Sectors + AMD Standard command set, Manufacturer ID: 0x01, Device ID: 0x49 + Erase timeout: 16384 ms, write timeout: 1 ms + + Sector Start Addresses: + FFE00000 RO FFE04000 RO FFE06000 RO FFE08000 RO FFE10000 RO + FFE20000 FFE30000 FFE40000 FFE50000 FFE60000 + FFE70000 FFE80000 FFE90000 FFEA0000 FFEB0000 + FFEC0000 FFED0000 FFEE0000 FFEF0000 FFF00000 + FFF10000 FFF20000 FFF30000 FFF40000 FFF50000 + FFF60000 FFF70000 FFF80000 FFF90000 FFFA0000 + FFFB0000 FFFC0000 FFFD0000 FFFE0000 FFFF0000 + +=> bdinfo +boot_params = 0x00F62F90 +memstart = 0x00000000 +memsize = 0x01000000 +flashstart = 0xFFE00000 +flashsize = 0x00200000 +flashoffset = 0x00000000 +baudrate = 19200 bps + +=> printenv +bootdelay=5 +baudrate=19200 +stdin=serial +stdout=serial +stderr=serial + +Environment size: 134/8188 bytes +=> saveenv +Saving Environment to Flash... +Un-Protected 1 sectors +Erasing Flash... +. done +Erased 1 sectors +Writing to Flash... done +Protected 1 sectors +=> + +5. COMPILER +----------- +To create U-Boot the CodeSourcery's version of the GNU Toolchain for the ColdFire architecture +compiler set (freescale-coldfire-4.1-elf) from www.codesourcery.com was used. +You can download it from:http://www.codesourcery.com/gnu_toolchains/coldfire/download.html + +compiler that you used - for example, codesourcery_elf requires -MQ in rules.mk, old M68K 2.95.3 just -M +codesourcery_elf requires -MQ in rules.mk, old M68K 2.95.3 just -M diff --git a/include/asm-m68k/immap.h b/include/asm-m68k/immap.h index 3ee7071f399..bf7b51becfa 100644 --- a/include/asm-m68k/immap.h +++ b/include/asm-m68k/immap.h @@ -43,11 +43,34 @@ #define CFG_TMRINTR_NO (31) #define CFG_TMRINTR_MASK (0x00000400) #define CFG_TMRINTR_PEND (CFG_TMRINTR_MASK) -#define CFG_TMRINTR_PRI (0) /* Level must include inorder to work */ +#define CFG_TMRINTR_PRI (MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3) #define CFG_TIMER_PRESCALER (((gd->bus_clk / 2000000) - 1) << 8) #endif #endif /* CONFIG_M5249 */ +#ifdef CONFIG_M5253 +#include +#include +#include + +#define CFG_UART_BASE (MMAP_UART0 + (CFG_UART_PORT * 0x40)) + +#define CFG_INTR_BASE (MMAP_INTC) +#define CFG_NUM_IRQS (64) + +/* Timer */ +#ifdef CONFIG_MCFTMR +#define CFG_UDELAY_BASE (MMAP_DTMR0) +#define CFG_TMR_BASE (MMAP_DTMR1) +#define CFG_TMRPND_REG (mbar_readLong(MCFSIM_IPR)) +#define CFG_TMRINTR_NO (27) +#define CFG_TMRINTR_MASK (0x00000400) +#define CFG_TMRINTR_PEND (CFG_TMRINTR_MASK) +#define CFG_TMRINTR_PRI (MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL3 | MCFSIM_ICR_PRI3) +#define CFG_TIMER_PRESCALER (((gd->bus_clk / 2000000) - 1) << 8) +#endif +#endif /* CONFIG_M5253 */ + #ifdef CONFIG_M5271 #include #include diff --git a/include/asm-m68k/immap_5253.h b/include/asm-m68k/immap_5253.h new file mode 100644 index 00000000000..aafbdd09579 --- /dev/null +++ b/include/asm-m68k/immap_5253.h @@ -0,0 +1,95 @@ +/* + * MCF5253 Internal Memory Map + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __IMMAP_5249__ +#define __IMMAP_5249__ + +#define MMAP_INTC (CFG_MBAR + 0x00000040) +#define MMAP_DTMR0 (CFG_MBAR + 0x00000140) +#define MMAP_DTMR1 (CFG_MBAR + 0x00000180) +#define MMAP_UART0 (CFG_MBAR + 0x000001C0) +#define MMAP_UART1 (CFG_MBAR + 0x00000200) +#define MMAP_I2C0 (CFG_MBAR + 0x00000280) +#define MMAP_QSPI (CFG_MBAR + 0x00000400) +#define MMAP_CAN0 (CFG_MBAR + 0x00010000) +#define MMAP_CAN1 (CFG_MBAR + 0x00011000) + +#define MMAP_I2C1 (CFG_MBAR2 + 0x00000440) +#define MMAP_UART2 (CFG_MBAR2 + 0x00000C00) + +/********************************************************************* +* ATA Module (ATAC) +*********************************************************************/ + +/* Register read/write struct */ +typedef struct atac { + /* PIO */ + u8 toff; /* 0x00 */ + u8 ton; /* 0x01 */ + u8 t1; /* 0x02 */ + u8 t2w; /* 0x03 */ + u8 t2r; /* 0x04 */ + u8 ta; /* 0x05 */ + u8 trd; /* 0x06 */ + u8 t4; /* 0x07 */ + u8 t9; /* 0x08 */ + + /* DMA */ + u8 tm; /* 0x09 */ + u8 tn; /* 0x0A */ + u8 td; /* 0x0B */ + u8 tk; /* 0x0C */ + u8 tack; /* 0x0D */ + u8 tenv; /* 0x0E */ + u8 trp; /* 0x0F */ + u8 tzah; /* 0x10 */ + u8 tmli; /* 0x11 */ + u8 tdvh; /* 0x12 */ + u8 tdzfs; /* 0x13 */ + u8 tdvs; /* 0x14 */ + u8 tcvh; /* 0x15 */ + u8 tss; /* 0x16 */ + u8 tcyc; /* 0x17 */ + + /* FIFO */ + u32 fifo32; /* 0x18 */ + u16 fifo16; /* 0x1C */ + u8 rsvd0[2]; + u8 ffill; /* 0x20 */ + u8 rsvd1[3]; + + /* ATA */ + u8 cr; /* 0x24 */ + u8 rsvd2[3]; + u8 isr; /* 0x28 */ + u8 rsvd3[3]; + u8 ier; /* 0x2C */ + u8 rsvd4[3]; + u8 icr; /* 0x30 */ + u8 rsvd5[3]; + u8 falarm; /* 0x34 */ +} atac_t; + +#endif /* __IMMAP_5249__ */ diff --git a/include/asm-m68k/m5253.h b/include/asm-m68k/m5253.h new file mode 100644 index 00000000000..eda3472738e --- /dev/null +++ b/include/asm-m68k/m5253.h @@ -0,0 +1,73 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef m5253_h +#define m5253_h +/****************************************************************************/ + +/* +* PLL Module (PLL) +*/ + +/* Register read/write macros */ +#define PLL_PLLCR (0x000180) + +#define SIM_RSR (0x000000) +#define SIM_SYPCR (0x000001) +#define SIM_SWIVR (0x000002) +#define SIM_SWSR (0x000003) +#define SIM_MPARK (0x00000C) + +/* Bit definitions and macros for RSR */ +#define SIM_RSR_SWTR (0x20) +#define SIM_RSR_HRST (0x80) + +/* Register read/write macros */ +#define CIM_MISCCR (0x000500) +#define CIM_ATA_DADDR (0x000504) +#define CIM_ATA_DCOUNT (0x000508) +#define CIM_RTC_TIME (0x00050C) +#define CIM_USB_CANCLK (0x000510) + +/* Bit definitions and macros for MISCCR */ +#define CIM_MISCCR_ADTA (0x00000001) +#define CIM_MISCCR_ADTD (0x00000002) +#define CIM_MISCCR_ADIE (0x00000004) +#define CIM_MISCCR_ADIC (0x00000008) +#define CIM_MISCCR_ADIP (0x00000010) +#define CIM_MISCCR_CPUEND (0x00000020) +#define CIM_MISCCR_DMAEND (0x00000040) +#define CIM_MISCCR_RTCCLR (0x00000080) +#define CIM_MISCCR_RTCPL (0x00000100) +#define CIM_MISCCR_URIE (0x00000800) +#define CIM_MISCCR_URIC (0x00001000) +#define CIM_MISCCR_URIP (0x00002000) + +/* Bit definitions and macros for ATA_DADDR */ +#define CIM_ATA_DADDR_ATAADDR(x) (((x)&0x00003FFF)<<2) +#define CIM_ATA_DADDR_RAMADDR(x) (((x)&0x00003FFF)<<18) + +/* Bit definitions and macros for ATA_DCOUNT */ +#define CIM_ATA_DCOUNT_COUNT(x) (((x)&0x0000FFFF)) + +#endif /* m5253_h */ diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h new file mode 100644 index 00000000000..9ad74e2bc67 --- /dev/null +++ b/include/configs/M5253EVBE.h @@ -0,0 +1,213 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * Hayden Fraser (Hayden.Fraser@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _M5253EVBE_H +#define _M5253EVBE_H + +#define CONFIG_MCF52x2 /* define processor family */ +#define CONFIG_M5253 /* define processor type */ +#define CONFIG_M5253EVBE /* define board type */ + +#define CONFIG_MCFTMR + +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) +#define CONFIG_BAUDRATE 19200 +#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } + +#undef CONFIG_WATCHDOG /* disable watchdog */ + +#define CONFIG_BOOTDELAY 5 + +/* Configuration for environment + * Environment is embedded in u-boot in the second sector of the flash + */ +#ifndef CONFIG_MONITOR_IS_IN_RAM +#define CFG_ENV_OFFSET 0x4000 +#define CFG_ENV_SECT_SIZE 0x2000 +#define CFG_ENV_IS_IN_FLASH 1 +#else +#define CFG_ENV_ADDR 0xffe04000 +#define CFG_ENV_SECT_SIZE 0x2000 +#define CFG_ENV_IS_IN_FLASH 1 +#endif + +/* + * BOOTP options + */ +#undef CONFIG_BOOTP_BOOTFILESIZE +#undef CONFIG_BOOTP_BOOTPATH +#undef CONFIG_BOOTP_GATEWAY +#undef CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include +#undef CONFIG_CMD_NET +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_IDE +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC + +/* ATA */ +#define CONFIG_DOS_PARTITION +#define CONFIG_MAC_PARTITION +#define CONFIG_IDE_RESET 1 +#define CONFIG_IDE_PREINIT 1 +#define CONFIG_ATAPI +#undef CONFIG_LBA48 + +#define CFG_IDE_MAXBUS 1 +#define CFG_IDE_MAXDEVICE 2 + +#define CFG_ATA_BASE_ADDR (CFG_MBAR2 + 0x800) +#define CFG_ATA_IDE0_OFFSET 0 + +#define CFG_ATA_DATA_OFFSET 0xA0 /* Offset for data I/O */ +#define CFG_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */ +#define CFG_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */ +#define CFG_ATA_STRIDE 4 /* Interval between registers */ +#define _IO_BASE 0 + +#define CFG_PROMPT "=> " +#define CFG_LONGHELP /* undef to save memory */ + +#if defined(CONFIG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_LOAD_ADDR 0x00100000 + +#define CFG_MEMTEST_START 0x400 +#define CFG_MEMTEST_END 0x380000 + +#define CFG_HZ 1000 + +#undef CFG_PLL_BYPASS /* bypass PLL for test purpose */ +#define CFG_FAST_CLK +#ifdef CFG_FAST_CLK +# define CFG_PLLCR 0x1243E054 +# define CFG_CLK 140000000 +#else +# define CFG_PLLCR 0x135a4140 +# define CFG_CLK 70000000 +#endif + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ + +#define CFG_MBAR 0x10000000 /* Register Base Addrs */ +#define CFG_MBAR2 0x80000000 /* Module Base Addrs 2 */ + +/* + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR 0x20000000 +#define CFG_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */ +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/* + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ + +#ifdef CONFIG_MONITOR_IS_IN_RAM +#define CFG_MONITOR_BASE 0x20000 +#else +#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) +#endif + +#define CFG_MONITOR_LEN 0x40000 +#define CFG_MALLOC_LEN (256 << 10) +#define CFG_BOOTPARAMS_LEN (64*1024) + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization ?? + */ +#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) + +/* FLASH organization */ +#define CFG_FLASH_BASE 0xffe00000 +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 35 /* max number of sectors on one chip */ +#define CFG_FLASH_ERASE_TOUT 1000 + +#define CFG_FLASH_CFI 1 +#define CFG_FLASH_CFI_DRIVER 1 +#define CFG_FLASH_SIZE 0x200000 +#define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT + +/* Cache Configuration */ +#define CFG_CACHELINE_SIZE 16 + +/* Port configuration */ +#define CFG_FECI2C 0xF0 + +#define CFG_CSAR0 0xFFE0 +#define CFG_CSMR0 0x001F0021 +#define CFG_CSCR0 0x1D80 + +#define CFG_CSAR1 0 +#define CFG_CSMR1 0 +#define CFG_CSCR1 0 + +#define CFG_CSAR2 0 +#define CFG_CSMR2 0 +#define CFG_CSCR2 0 + +#define CFG_CSAR3 0 +#define CFG_CSMR3 0 +#define CFG_CSCR3 0 + +/*----------------------------------------------------------------------- + * Port configuration + */ +#define CFG_GPIO_FUNC 0x00000008 /* Set gpio pins: none */ +#define CFG_GPIO1_FUNC 0x00df00f0 /* 36-39(SWITCH),48-52(FPGAs),54 */ +#define CFG_GPIO_EN 0x00000008 /* Set gpio output enable */ +#define CFG_GPIO1_EN 0x00c70000 /* Set gpio output enable */ +#define CFG_GPIO_OUT 0x00000008 /* Set outputs to default state */ +#define CFG_GPIO1_OUT 0x00c70000 /* Set outputs to default state */ +#define CFG_GPIO1_LED 0x00400000 /* user led */ + +#endif /* _M5253EVB_H */ + diff --git a/lib_m68k/interrupts.c b/lib_m68k/interrupts.c old mode 100644 new mode 100755 index 8919c0e8cba..1635d6fed5e --- a/lib_m68k/interrupts.c +++ b/lib_m68k/interrupts.c @@ -106,8 +106,6 @@ void int_handler (struct pt_regs *fp) vec = (fp->vector >> 2) & 0xff; if (vec > 0x40) vec -= 0x40; - else - return; if (irq_vecs[vec].handler != NULL) { irq_vecs[vec].handler (irq_vecs[vec].arg); -- cgit v1.3.1 From 8ae158cd87a4a25722b27835261b6ff0fa2aa6a7 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 16 Aug 2007 15:05:11 -0500 Subject: ColdFire: Add M54455EVB for MCF5445x Signed-off-by: TsiChungLiew --- CREDITS | 2 +- MAINTAINERS | 9 + MAKEALL | 1 + Makefile | 28 + README | 1 + board/freescale/m54455evb/Makefile | 44 + board/freescale/m54455evb/config.mk | 25 + board/freescale/m54455evb/flash.c | 974 +++++++++++++++++++++ board/freescale/m54455evb/m54455evb.c | 165 ++++ board/freescale/m54455evb/mii.c | 320 +++++++ board/freescale/m54455evb/u-boot.lds | 144 +++ common/cmd_bdinfo.c | 22 +- cpu/mcf5445x/Makefile | 48 + cpu/mcf5445x/config.mk | 27 + cpu/mcf5445x/cpu.c | 97 +++ cpu/mcf5445x/cpu_init.c | 140 +++ cpu/mcf5445x/interrupts.c | 52 ++ cpu/mcf5445x/pci.c | 189 ++++ cpu/mcf5445x/speed.c | 186 ++++ cpu/mcf5445x/start.S | 388 +++++++++ doc/README.m54455evb | 416 +++++++++ drivers/net/mcffec.c | 27 +- include/asm-m68k/global_data.h | 8 + include/asm-m68k/immap.h | 40 + include/asm-m68k/immap_5445x.h | 937 ++++++++++++++++++++ include/asm-m68k/m5445x.h | 1541 +++++++++++++++++++++++++++++++++ include/asm-m68k/rtc.h | 3 +- include/asm-m68k/u-boot.h | 8 + include/configs/M54455EVB.h | 391 +++++++++ lib_m68k/board.c | 30 +- lib_m68k/interrupts.c | 0 lib_m68k/m68k_linux.c | 376 ++++---- 32 files changed, 6459 insertions(+), 180 deletions(-) create mode 100644 board/freescale/m54455evb/Makefile create mode 100644 board/freescale/m54455evb/config.mk create mode 100644 board/freescale/m54455evb/flash.c create mode 100644 board/freescale/m54455evb/m54455evb.c create mode 100644 board/freescale/m54455evb/mii.c create mode 100644 board/freescale/m54455evb/u-boot.lds create mode 100644 cpu/mcf5445x/Makefile create mode 100644 cpu/mcf5445x/config.mk create mode 100644 cpu/mcf5445x/cpu.c create mode 100644 cpu/mcf5445x/cpu_init.c create mode 100644 cpu/mcf5445x/interrupts.c create mode 100644 cpu/mcf5445x/pci.c create mode 100644 cpu/mcf5445x/speed.c create mode 100644 cpu/mcf5445x/start.S create mode 100644 doc/README.m54455evb create mode 100644 include/asm-m68k/immap_5445x.h create mode 100644 include/asm-m68k/m5445x.h create mode 100644 include/configs/M54455EVB.h mode change 100755 => 100644 lib_m68k/interrupts.c (limited to 'Makefile') diff --git a/CREDITS b/CREDITS index b1abad32a21..f30b2228fbb 100644 --- a/CREDITS +++ b/CREDITS @@ -491,7 +491,7 @@ W: www.monstr.eu N: TsiChung Liew E: Tsi-Chung.Liew@freescale.com -D: Support for ColdFire MCF532x +D: Support for ColdFire MCF532x, MCF5445x W: www.freescale.com N: Hayden Fraser diff --git a/MAINTAINERS b/MAINTAINERS index d5249e51553..7fde6d99efe 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -606,6 +606,15 @@ Zachary P. Landau r5200 mcf52x2 +TsiChung Liew + + M5329EVB mcf532x + M54455EVB mcf5445x + +Hayden Fraser + + M5253EVBE mcf52x2 + ######################################################################### # AVR32 Systems: # # # diff --git a/MAKEALL b/MAKEALL index 890ee39a78f..b7ed0f4305c 100755 --- a/MAKEALL +++ b/MAKEALL @@ -624,6 +624,7 @@ LIST_coldfire=" \ M5272C3 \ M5282EVB \ M5329EVB \ + M54455EVB \ r5200 \ TASREG \ " diff --git a/Makefile b/Makefile index e5995ebfc40..201ad0e7789 100644 --- a/Makefile +++ b/Makefile @@ -1692,6 +1692,34 @@ M5329BFEE_config : unconfig fi @$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale +M54455EVB_config \ +M54455EVB_atmel_config \ +M54455EVB_intel_config \ +M54455EVB_a33_config \ +M54455EVB_a66_config \ +M54455EVB_i33_config \ +M54455EVB_i66_config : unconfig + @case "$@" in \ + M54455EVB_config) FLASH=ATMEL; FREQ=33333333;; \ + M54455EVB_atmel_config) FLASH=ATMEL; FREQ=33333333;; \ + M54455EVB_intel_config) FLASH=INTEL; FREQ=33333333;; \ + M54455EVB_a33_config) FLASH=ATMEL; FREQ=33333333;; \ + M54455EVB_a66_config) FLASH=ATMEL; FREQ=66666666;; \ + M54455EVB_i33_config) FLASH=INTEL; FREQ=33333333;; \ + M54455EVB_i66_config) FLASH=INTEL; FREQ=66666666;; \ + esac; \ + >include/config.h ; \ + if [ "$${FLASH}" == "INTEL" ] ; then \ + echo "#undef CFG_ATMEL_BOOT" >> include/config.h ; \ + echo "... with INTEL boot..." ; \ + else \ + echo "#define CFG_ATMEL_BOOT" >> include/config.h ; \ + echo "... with ATMEL boot..." ; \ + fi; \ + echo "#define CFG_INPUT_CLKSRC $${FREQ}" >>include/config.h ; \ + echo "... with $${FREQ}Hz input clock" + @$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale + ######################################################################### ## MPC83xx Systems ######################################################################### diff --git a/README b/README index 4f2acb40d1f..4b1982b221f 100644 --- a/README +++ b/README @@ -137,6 +137,7 @@ Directory Hierarchy: - ixp Files specific to Intel XScale IXP CPUs - mcf52x2 Files specific to Freescale ColdFire MCF52x2 CPUs - mcf532x Files specific to Freescale ColdFire MCF5329 CPUs + - mcf5445x Files specific to Freescale ColdFire MCF5445x CPUs - mips Files specific to MIPS CPUs - mpc5xx Files specific to Freescale MPC5xx CPUs - mpc5xxx Files specific to Freescale MPC5xxx CPUs diff --git a/board/freescale/m54455evb/Makefile b/board/freescale/m54455evb/Makefile new file mode 100644 index 00000000000..ca9a7729e1c --- /dev/null +++ b/board/freescale/m54455evb/Makefile @@ -0,0 +1,44 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o flash.o mii.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### \ No newline at end of file diff --git a/board/freescale/m54455evb/config.mk b/board/freescale/m54455evb/config.mk new file mode 100644 index 00000000000..ce014edca8f --- /dev/null +++ b/board/freescale/m54455evb/config.mk @@ -0,0 +1,25 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Coldfire contribution by Bernhard Kuhn +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0 diff --git a/board/freescale/m54455evb/flash.c b/board/freescale/m54455evb/flash.c new file mode 100644 index 00000000000..de2cca863a9 --- /dev/null +++ b/board/freescale/m54455evb/flash.c @@ -0,0 +1,974 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +#include + +#ifndef CFG_FLASH_CFI +typedef unsigned char FLASH_PORT_WIDTH; +typedef volatile unsigned char FLASH_PORT_WIDTHV; + +#define FPW FLASH_PORT_WIDTH +#define FPWV FLASH_PORT_WIDTHV + +#define CFG_FLASH_CFI_WIDTH FLASH_CFI_8BIT +#define CFG_FLASH_NONCFI_WIDTH FLASH_CFI_8BIT + +/* Intel-compatible flash commands */ +#define INTEL_PROGRAM 0x00100010 +#define INTEL_ERASE 0x00200020 +#define INTEL_WRSETUP 0x00400040 +#define INTEL_CLEAR 0x00500050 +#define INTEL_LOCKBIT 0x00600060 +#define INTEL_PROTECT 0x00010001 +#define INTEL_STATUS 0x00700070 +#define INTEL_READID 0x00900090 +#define INTEL_CFIQRY 0x00980098 +#define INTEL_SUSERASE 0x00B000B0 +#define INTEL_PROTPROG 0x00C000C0 +#define INTEL_CONFIRM 0x00D000D0 +#define INTEL_WRBLK 0x00e800e8 +#define INTEL_RESET 0x00FF00FF + +/* Intel-compatible flash status bits */ +#define INTEL_FINISHED 0x00800080 +#define INTEL_OK 0x00800080 +#define INTEL_ERASESUS 0x00600060 +#define INTEL_WSM_SUS (INTEL_FINISHED | INTEL_ERASESUS) + +/* 28F160C3B CFI Data offset - This could vary */ +#define INTEL_CFI_MFG 0x00 /* Manufacturer ID */ +#define INTEL_CFI_PART 0x01 /* Product ID */ +#define INTEL_CFI_LOCK 0x02 /* */ +#define INTEL_CFI_TWPRG 0x1F /* Typical Single Word Program Timeout 2^n us */ +#define INTEL_CFI_MBUFW 0x20 /* Typical Max Buffer Write Timeout 2^n us */ +#define INTEL_CFI_TERB 0x21 /* Typical Block Erase Timeout 2^n ms */ +#define INTEL_CFI_MWPRG 0x23 /* Maximum Word program timeout 2^n us */ +#define INTEL_CFI_MERB 0x25 /* Maximum Block Erase Timeout 2^n s */ +#define INTEL_CFI_SIZE 0x27 /* Device size 2^n bytes */ +#define INTEL_CFI_CAP 0x28 +#define INTEL_CFI_WRBUF 0x2A +#define INTEL_CFI_BANK 0x2C /* Number of Bank */ +#define INTEL_CFI_BLK1A 0x2D /* Number of Blocks */ +#define INTEL_CFI_BLK1B 0x2E /* Number of Blocks */ +#define INTEL_CFI_SZ1A 0x2F /* Block Region Size */ +#define INTEL_CFI_SZ1B 0x30 +#define INTEL_CFI_BLK2A 0x31 +#define INTEL_CFI_BLK2B 0x32 +#define INTEL_CFI_SZ2A 0x33 +#define INTEL_CFI_SZ2B 0x34 + +#define FLASH_CYCLE1 0x0555 +#define FLASH_CYCLE2 0x0aaa + +#define WR_BLOCK 0x20 + +/* not in the flash.h yet */ +#define FLASH_28F64P30T 0x00B9 /* Intel 28F64P30T ( 64M) */ +#define FLASH_28F64P30B 0x00BA /* Intel 28F64P30B ( 64M) */ +#define FLASH_28F128P30T 0x00BB /* Intel 28F128P30T ( 128M = 8M x 16 ) */ +#define FLASH_28F128P30B 0x00BC /* Intel 28F128P30B ( 128M = 8M x 16 ) */ +#define FLASH_28F256P30T 0x00BD /* Intel 28F256P30T ( 256M = 16M x 16 ) */ +#define FLASH_28F256P30B 0x00BE /* Intel 28F256P30B ( 256M = 16M x 16 ) */ + +#define SYNC __asm__("nop") + +/*----------------------------------------------------------------------- + * Functions + */ + +ulong flash_get_size(FPWV * addr, flash_info_t * info); +int flash_get_offsets(ulong base, flash_info_t * info); +int flash_cmd_rd(volatile u16 * addr, int index); +int write_data(flash_info_t * info, ulong dest, FPW data); +int write_data_block(flash_info_t * info, ulong src, ulong dest); +int write_word_atm(flash_info_t * info, volatile u8 * dest, u16 data); +void inline spin_wheel(void); +void flash_sync_real_protect(flash_info_t * info); +uchar intel_sector_protected(flash_info_t * info, ushort sector); + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; + +ulong flash_init(void) +{ + int i; + ulong size = 0; + ulong fbase = 0; + + for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { + memset(&flash_info[i], 0, sizeof(flash_info_t)); + + switch (i) { + case 0: + fbase = (ulong) CFG_FLASH0_BASE; + break; + case 1: + fbase = (ulong) CFG_FLASH1_BASE; + break; + } + + flash_get_size((FPWV *) fbase, &flash_info[i]); + flash_get_offsets((ulong) fbase, &flash_info[i]); + fbase += flash_info[i].size; + size += flash_info[i].size; + + /* get the h/w and s/w protection status in sync */ + flash_sync_real_protect(&flash_info[i]); + } + + /* Protect monitor and environment sectors */ + flash_protect(FLAG_PROTECT_SET, + CFG_MONITOR_BASE, + CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]); + + return size; +} + +int flash_get_offsets(ulong base, flash_info_t * info) +{ + int i, j, k; + int sectors, bs, banks; + ulong start; + + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_ATM) { + int sect[] = CFG_ATMEL_SECT; + int sectsz[] = CFG_ATMEL_SECTSZ; + + info->start[0] = base; + for (k = 0, i = 0; i < CFG_ATMEL_REGION; i++) { + for (j = 0; j < sect[i]; j++, k++) { + info->start[k + 1] = info->start[k] + sectsz[i]; + info->protect[k] = 0; + } + } + } + + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { + volatile u16 *addr16 = (volatile u16 *)base; + + *addr16 = (FPW) INTEL_RESET; /* restore read mode */ + *addr16 = (FPW) INTEL_READID; + + banks = addr16[INTEL_CFI_BANK] & 0xff; + + sectors = 0; + info->start[0] = base; + + for (k = 0, i = 0; i < banks; i++) { + /* Geometry y1 = y1 + 1, y2 = y2 + 1, CFI spec. + * To be exact, Z = [0x2f 0x30] (LE) * 256 bytes * [0x2D 0x2E] block count + * Z = [0x33 0x34] (LE) * 256 bytes * [0x31 0x32] block count + */ + bs = ((((addr16[INTEL_CFI_SZ1B + (i * 4)] & 0xff) << 8) + | (addr16[INTEL_CFI_SZ1A + (i * 4)] & 0xff)) * + 0x100); + sectors = + (addr16[INTEL_CFI_BLK1A + (i * 4)] & 0xff) + 1; + + for (j = 0; j < sectors; j++, k++) { + info->start[k + 1] = info->start[k] + bs; + } + } + + *addr16 = (FPW) INTEL_RESET; /* restore read mode */ + } + + return ERR_OK; +} + +void flash_print_info(flash_info_t * info) +{ + int i; + + switch (info->flash_id & FLASH_VENDMASK) { + case FLASH_MAN_INTEL: + printf("INTEL "); + break; + case FLASH_MAN_ATM: + printf("ATMEL "); + break; + default: + printf("Unknown Vendor "); + break; + } + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_AT040: + printf("AT49BV040A\n"); + break; + case FLASH_28F128J3A: + printf("Intel 28F128J3A\n"); + break; + default: + printf("Unknown Chip Type\n"); + return; + } + + if (info->size > 0x100000) { + int remainder; + + printf(" Size: %ld", info->size >> 20); + + remainder = (info->size % 0x100000); + if (remainder) { + remainder >>= 10; + remainder = (int)((float) + (((float)remainder / (float)1024) * + 10000)); + printf(".%d ", remainder); + } + + printf("MB in %d Sectors\n", info->sector_count); + } else + printf(" Size: %ld KB in %d Sectors\n", + info->size >> 10, info->sector_count); + + printf(" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; ++i) { + if ((i % 5) == 0) + printf("\n "); + printf(" %08lX%s", + info->start[i], info->protect[i] ? " (RO)" : " "); + } + printf("\n"); +} + +/* + * The following code cannot be run from FLASH! + */ +ulong flash_get_size(FPWV * addr, flash_info_t * info) +{ + volatile u16 *addr16 = (volatile u16 *)addr; + int intel = 0, banks = 0; + u16 value; + int i; + + addr[FLASH_CYCLE1] = (FPWV) 0x00AA00AA; /* for Atmel, Intel ignores this */ + addr[FLASH_CYCLE2] = (FPWV) 0x00550055; /* for Atmel, Intel ignores this */ + addr[FLASH_CYCLE1] = (FPWV) 0x00900090; /* selects Intel or Atmel */ + + switch (addr[0] & 0xff) { + case (u8) ATM_MANUFACT: + info->flash_id = FLASH_MAN_ATM; + value = addr[1]; + break; + case (u8) INTEL_MANUFACT: + /* Terminate Atmel ID read */ + addr[0] = (FPWV) 0x00F000F0; + /* Write auto select command: read Manufacturer ID */ + /* Write auto select command sequence and test FLASH answer */ + *addr16 = (FPW) INTEL_RESET; /* restore read mode */ + *addr16 = (FPW) INTEL_READID; + + info->flash_id = FLASH_MAN_INTEL; + value = (addr16[INTEL_CFI_MFG] << 8); + value |= addr16[INTEL_CFI_PART] & 0xff; + intel = 1; + break; + default: + printf("Unknown Flash\n"); + info->flash_id = FLASH_UNKNOWN; + info->sector_count = 0; + info->size = 0; + + *addr = (FPW) 0x00F000F0; + *addr = (FPW) INTEL_RESET; /* restore read mode */ + return (0); /* no or unknown flash */ + } + + switch (value) { + case (u8) ATM_ID_LV040: + info->flash_id += FLASH_AT040; + break; + case (u16) INTEL_ID_28F128J3: + info->flash_id += FLASH_28F128J3A; + break; + case (u16) INTEL_ID_28F64P30T: + info->flash_id += FLASH_28F64P30T; + break; + case (u16) INTEL_ID_28F64P30B: + info->flash_id += FLASH_28F64P30B; + break; + case (u16) INTEL_ID_28F128P30T: + info->flash_id += FLASH_28F128P30T; + break; + case (u16) INTEL_ID_28F128P30B: + info->flash_id += FLASH_28F128P30B; + break; + case (u16) INTEL_ID_28F256P30T: + info->flash_id += FLASH_28F256P30T; + break; + case (u16) INTEL_ID_28F256P30B: + info->flash_id += FLASH_28F256P30B; + break; + default: + info->flash_id = FLASH_UNKNOWN; + break; + } + + if (intel) { + /* Intel spec. under CFI section */ + u32 sz; + int sectors, bs; + + banks = addr16[INTEL_CFI_BANK] & 0xff; + + sectors = sz = 0; + for (i = 0; i < banks; i++) { + /* Geometry y1 = y1 + 1, y2 = y2 + 1, CFI spec. + * To be exact, Z = [0x2f 0x30] (LE) * 256 bytes * [0x2D 0x2E] block count + * Z = [0x33 0x34] (LE) * 256 bytes * [0x31 0x32] block count + */ + bs = ((((addr16[INTEL_CFI_SZ1B + (i * 4)] & 0xff) << 8) + | (addr16[INTEL_CFI_SZ1A + (i * 4)] & 0xff)) * + 0x100); + sectors += + (addr16[INTEL_CFI_BLK1A + (i * 4)] & 0xff) + 1; + sz += (bs * sectors); + } + + info->sector_count = sectors; + info->size = sz; + *addr = (FPW) INTEL_RESET; /* restore read mode */ + } else { + int sect[] = CFG_ATMEL_SECT; + int sectsz[] = CFG_ATMEL_SECTSZ; + + info->sector_count = 0; + info->size = 0; + for (i = 0; i < CFG_ATMEL_REGION; i++) { + info->sector_count += sect[i]; + info->size += sect[i] * sectsz[i]; + } + + /* reset ID mode */ + addr[0] = (FPWV) 0x00F000F0; + } + + if (info->sector_count > CFG_MAX_FLASH_SECT) { + printf("** ERROR: sector count %d > max (%d) **\n", + info->sector_count, CFG_MAX_FLASH_SECT); + info->sector_count = CFG_MAX_FLASH_SECT; + } + + return (info->size); +} + +int flash_cmd_rd(volatile u16 * addr, int index) +{ + return (int)addr[index]; +} + +/* + * This function gets the u-boot flash sector protection status + * (flash_info_t.protect[]) in sync with the sector protection + * status stored in hardware. + */ +void flash_sync_real_protect(flash_info_t * info) +{ + int i; + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_28F160C3B: + case FLASH_28F160C3T: + case FLASH_28F320C3B: + case FLASH_28F320C3T: + case FLASH_28F640C3B: + case FLASH_28F640C3T: + for (i = 0; i < info->sector_count; ++i) { + info->protect[i] = intel_sector_protected(info, i); + } + break; + default: + /* no h/w protect support */ + break; + } +} + +/* + * checks if "sector" in bank "info" is protected. Should work on intel + * strata flash chips 28FxxxJ3x in 8-bit mode. + * Returns 1 if sector is protected (or timed-out while trying to read + * protection status), 0 if it is not. + */ +uchar intel_sector_protected(flash_info_t * info, ushort sector) +{ + FPWV *addr; + FPWV *lock_conf_addr; + ulong start; + unsigned char ret; + + /* + * first, wait for the WSM to be finished. The rationale for + * waiting for the WSM to become idle for at most + * CFG_FLASH_ERASE_TOUT is as follows. The WSM can be busy + * because of: (1) erase, (2) program or (3) lock bit + * configuration. So we just wait for the longest timeout of + * the (1)-(3), i.e. the erase timeout. + */ + + /* wait at least 35ns (W12) before issuing Read Status Register */ + /*udelay(1); */ + addr = (FPWV *) info->start[sector]; + *addr = (FPW) INTEL_STATUS; + + start = get_timer(0); + while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) { + if (get_timer(start) > CFG_FLASH_UNLOCK_TOUT) { + *addr = (FPW) INTEL_RESET; /* restore read mode */ + printf("WSM busy too long, can't get prot status\n"); + return 1; + } + } + + /* issue the Read Identifier Codes command */ + *addr = (FPW) INTEL_READID; + + /* Intel example code uses offset of 4 for 8-bit flash */ + lock_conf_addr = (FPWV *) info->start[sector]; + ret = (lock_conf_addr[INTEL_CFI_LOCK] & (FPW) INTEL_PROTECT) ? 1 : 0; + + /* put flash back in read mode */ + *addr = (FPW) INTEL_RESET; + + return ret; +} + +int flash_erase(flash_info_t * info, int s_first, int s_last) +{ + int flag, prot, sect; + ulong type, start, last; + int rcode = 0, intel = 0; + + if ((s_first < 0) || (s_first > s_last)) { + if (info->flash_id == FLASH_UNKNOWN) + printf("- missing\n"); + else + printf("- no sectors to erase\n"); + return 1; + } + + type = (info->flash_id & FLASH_VENDMASK); + + if (type != (FLASH_MAN_INTEL & FLASH_VENDMASK)) { + if (type != (FLASH_MAN_ATM & FLASH_VENDMASK)) { + type = (info->flash_id & FLASH_VENDMASK); + printf + ("Can't erase unknown flash type %08lx - aborted\n", + info->flash_id); + return 1; + } + } + + if (type == FLASH_MAN_INTEL) + intel = 1; + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + + if (prot) + printf("- Warning: %d protected sectors will not be erased!\n", + prot); + else + printf("\n"); + + start = get_timer(0); + last = start; + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect <= s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + + FPWV *addr = (FPWV *) (info->start[sect]); + int min = 0; + + printf("."); + + /* arm simple, non interrupt dependent timer */ + start = get_timer(0); + + if (intel) { + *addr = (FPW) INTEL_READID; + min = addr[INTEL_CFI_TERB] & 0xff; + min = 1 << min; /* ms */ + min = (min / info->sector_count) * 1000; + + /* start erase block */ + *addr = (FPW) INTEL_CLEAR; /* clear status register */ + *addr = (FPW) INTEL_ERASE; /* erase setup */ + *addr = (FPW) INTEL_CONFIRM; /* erase confirm */ + + while ((*addr & (FPW) INTEL_FINISHED) != + (FPW) INTEL_FINISHED) { + + if (get_timer(start) > + CFG_FLASH_ERASE_TOUT) { + printf("Timeout\n"); + *addr = (FPW) INTEL_SUSERASE; /* suspend erase */ + *addr = (FPW) INTEL_RESET; /* reset to read mode */ + + rcode = 1; + break; + } + } + + *addr = (FPW) INTEL_RESET; /* resest to read mode */ + } else { + FPWV *base; /* first address in bank */ + FPWV *atmeladdr; + + flag = disable_interrupts(); + + atmeladdr = (FPWV *) addr; /* concatenate to 8 bit */ + base = (FPWV *) (CFG_ATMEL_BASE); /* First sector */ + + base[FLASH_CYCLE1] = (u8) 0x00AA00AA; /* unlock */ + base[FLASH_CYCLE2] = (u8) 0x00550055; /* unlock */ + base[FLASH_CYCLE1] = (u8) 0x00800080; /* erase mode */ + base[FLASH_CYCLE1] = (u8) 0x00AA00AA; /* unlock */ + base[FLASH_CYCLE2] = (u8) 0x00550055; /* unlock */ + *atmeladdr = (u8) 0x00300030; /* erase sector */ + + if (flag) + enable_interrupts(); + + while ((*atmeladdr & (u8) 0x00800080) != + (u8) 0x00800080) { + if (get_timer(start) > + CFG_FLASH_ERASE_TOUT) { + printf("Timeout\n"); + *atmeladdr = (u8) 0x00F000F0; /* reset to read mode */ + + rcode = 1; + break; + } + } + + *atmeladdr = (u8) 0x00F000F0; /* reset to read mode */ + } /* Atmel or Intel */ + } + } + printf(" done\n"); + + return rcode; +} + +int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) +{ + if (info->flash_id == FLASH_UNKNOWN) + return 4; + + switch (info->flash_id & FLASH_VENDMASK) { + case FLASH_MAN_ATM: + { + u16 data = 0; + int bytes; /* number of bytes to program in current word */ + int left; /* number of bytes left to program */ + int i, res; + + for (left = cnt, res = 0; + left > 0 && res == 0; + addr += sizeof(data), left -= + sizeof(data) - bytes) { + + bytes = addr & (sizeof(data) - 1); + addr &= ~(sizeof(data) - 1); + + /* combine source and destination data so can program + * an entire word of 16 or 32 bits + */ + for (i = 0; i < sizeof(data); i++) { + data <<= 8; + if (i < bytes || i - bytes >= left) + data += *((uchar *) addr + i); + else + data += *src++; + } + + data = (data >> 8) | (data << 8); + res = write_word_atm(info, (FPWV *) addr, data); + } + return res; + } /* case FLASH_MAN_ATM */ + + case FLASH_MAN_INTEL: + { + ulong cp, wp; + u16 data; + int count, i, l, rc, port_width; + + /* get lower word aligned address */ + wp = addr; + port_width = sizeof(FPW); + + /* + * handle unaligned start bytes + */ + if ((l = addr - wp) != 0) { + data = 0; + for (i = 0, cp = wp; i < l; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + + for (; i < port_width && cnt > 0; ++i) { + data = (data << 8) | *src++; + --cnt; + ++cp; + } + + for (; cnt == 0 && i < port_width; ++i, ++cp) + data = (data << 8) | (*(uchar *) cp); + + if ((rc = write_data(info, wp, data)) != 0) + return (rc); + + wp += port_width; + } + + if (cnt > WR_BLOCK) { + /* + * handle word aligned part + */ + count = 0; + while (cnt >= WR_BLOCK) { + + if ((rc = + write_data_block(info, + (ulong) src, + wp)) != 0) + return (rc); + + wp += WR_BLOCK; + src += WR_BLOCK; + cnt -= WR_BLOCK; + + if (count++ > 0x800) { + spin_wheel(); + count = 0; + } + } + } + + /* handle word aligned part */ + if (cnt < WR_BLOCK) { + /* + * handle word aligned part + */ + count = 0; + while (cnt >= port_width) { + data = 0; + for (i = 0; i < port_width; ++i) + data = (data << 8) | *src++; + + if ((rc = + write_data(info, + (ulong) ((FPWV *) wp), + (FPW) (data))) != 0) + return (rc); + + wp += port_width; + cnt -= port_width; + if (count++ > 0x800) { + spin_wheel(); + count = 0; + } + } + } + + if (cnt == 0) + return ERR_OK; + + /* + * handle unaligned tail bytes + */ + data = 0; + for (i = 0, cp = wp; i < port_width && cnt > 0; + ++i, ++cp) { + data = (data << 8) | (*src++); + --cnt; + } + for (; i < port_width; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + + return write_data(info, (ulong) ((FPWV *) wp), + (FPW) data); + + } /* case FLASH_MAN_INTEL */ + + } /* switch */ + + return ERR_OK; +} + +/*----------------------------------------------------------------------- + * Write a word or halfword to Flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +int write_data_block(flash_info_t * info, ulong src, ulong dest) +{ + FPWV *srcaddr = (FPWV *) src; + FPWV *dstaddr = (FPWV *) dest; + ulong start; + int flag, i; + + /* Check if Flash is (sufficiently) erased */ + for (i = 0; i < WR_BLOCK; i++) + if ((*dstaddr++ & 0xff) != 0xff) { + printf("not erased at %08lx (%lx)\n", + (ulong) dstaddr, *dstaddr); + return (2); + } + + dstaddr = (FPWV *) dest; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + *dstaddr = (FPW) INTEL_WRBLK; /* write block setup */ + + if (flag) + enable_interrupts(); + + /* arm simple, non interrupt dependent timer */ + start = get_timer(0); + + /* wait while polling the status register */ + while ((*dstaddr & (FPW) INTEL_FINISHED) != (FPW) INTEL_OK) { + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + *dstaddr = (FPW) INTEL_RESET; /* restore read mode */ + return (1); + } + } + + *dstaddr = (FPW) WR_BLOCK - 1; /* write 32 to buffer */ + for (i = 0; i < WR_BLOCK; i++) + *dstaddr++ = *srcaddr++; + + dstaddr -= 1; + *dstaddr = (FPW) INTEL_CONFIRM; /* write 32 to buffer */ + + /* arm simple, non interrupt dependent timer */ + start = get_timer(0); + + /* wait while polling the status register */ + while ((*dstaddr & (FPW) INTEL_FINISHED) != (FPW) INTEL_OK) { + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + *dstaddr = (FPW) INTEL_RESET; /* restore read mode */ + return (1); + } + } + + *dstaddr = (FPW) INTEL_RESET; /* restore read mode */ + + return (0); +} + +/*----------------------------------------------------------------------- + * Write a word or halfword to Flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +int write_data(flash_info_t * info, ulong dest, FPW data) +{ + FPWV *addr = (FPWV *) dest; + ulong start; + int flag; + + /* Check if Flash is (sufficiently) erased */ + if ((*addr & data) != data) { + printf("not erased at %08lx (%lx)\n", (ulong) addr, + (ulong) * addr); + return (2); + } + + /* Disable interrupts which might cause a timeout here */ + flag = (int)disable_interrupts(); + + *addr = (FPW) INTEL_CLEAR; + *addr = (FPW) INTEL_RESET; + + *addr = (FPW) INTEL_WRSETUP; /* write setup */ + *addr = data; + + if (flag) + enable_interrupts(); + + /* arm simple, non interrupt dependent timer */ + start = get_timer(0); + + /* wait while polling the status register */ + while ((*addr & (FPW) INTEL_OK) != (FPW) INTEL_OK) { + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + *addr = (FPW) INTEL_SUSERASE; /* suspend mode */ + *addr = (FPW) INTEL_CLEAR; /* clear status */ + *addr = (FPW) INTEL_RESET; /* reset */ + return (1); + } + } + + *addr = (FPW) INTEL_CLEAR; /* clear status */ + *addr = (FPW) INTEL_RESET; /* restore read mode */ + + return (0); +} + +/*----------------------------------------------------------------------- + * Write a word to Flash for ATMEL FLASH + * A word is 16 bits, whichever the bus width of the flash bank + * (not an individual chip) is. + * + * returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +int write_word_atm(flash_info_t * info, volatile u8 * dest, u16 data) +{ + ulong start; + int flag, i; + int res = 0; /* result, assume success */ + FPWV *base; /* first address in flash bank */ + + /* Check if Flash is (sufficiently) erased */ + if ((*((volatile u16 *)dest) & data) != data) { + return (2); + } + + base = (FPWV *) (CFG_ATMEL_BASE); + + for (i = 0; i < sizeof(u16); i++) { + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + base[FLASH_CYCLE1] = (u8) 0x00AA00AA; /* unlock */ + base[FLASH_CYCLE2] = (u8) 0x00550055; /* unlock */ + base[FLASH_CYCLE1] = (u8) 0x00A000A0; /* selects program mode */ + + *dest = data; /* start programming the data */ + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + start = get_timer(0); + + /* data polling for D7 */ + while (res == 0 + && (*dest & (u8) 0x00800080) != + (data & (u8) 0x00800080)) { + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + *dest = (u8) 0x00F000F0; /* reset bank */ + res = 1; + } + } + + *dest++ = (u8) 0x00F000F0; /* reset bank */ + data >>= 8; + } + + return (res); +} + +void inline spin_wheel(void) +{ + static int p = 0; + static char w[] = "\\/-"; + + printf("\010%c", w[p]); + (++p == 3) ? (p = 0) : 0; +} + +#ifdef CFG_FLASH_PROTECTION +/*----------------------------------------------------------------------- + */ +int flash_real_protect(flash_info_t * info, long sector, int prot) +{ + int rcode = 0; /* assume success */ + FPWV *addr; /* address of sector */ + FPW value; + + addr = (FPWV *) (info->start[sector]); + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_28F160C3B: + case FLASH_28F160C3T: + case FLASH_28F320C3B: + case FLASH_28F320C3T: + case FLASH_28F640C3B: + case FLASH_28F640C3T: + *addr = (FPW) INTEL_RESET; /* make sure in read mode */ + *addr = (FPW) INTEL_LOCKBIT; /* lock command setup */ + + if (prot) + *addr = (FPW) INTEL_PROTECT; /* lock sector */ + else + *addr = (FPW) INTEL_CONFIRM; /* unlock sector */ + + /* now see if it really is locked/unlocked as requested */ + *addr = (FPW) INTEL_READID; + + /* read sector protection at sector address, (A7 .. A0) = 0x02. + * D0 = 1 for each device if protected. + * If at least one device is protected the sector is marked + * protected, but return failure. Mixed protected and + * unprotected devices within a sector should never happen. + */ + value = addr[2] & (FPW) INTEL_PROTECT; + if (value == 0) + info->protect[sector] = 0; + else if (value == (FPW) INTEL_PROTECT) + info->protect[sector] = 1; + else { + /* error, mixed protected and unprotected */ + rcode = 1; + info->protect[sector] = 1; + } + if (info->protect[sector] != prot) + rcode = 1; /* failed to protect/unprotect as requested */ + + /* reload all protection bits from hardware for now */ + flash_sync_real_protect(info); + break; + + default: + /* no hardware protect that we support */ + info->protect[sector] = prot; + break; + } + + return rcode; +} +#endif +#endif diff --git a/board/freescale/m54455evb/m54455evb.c b/board/freescale/m54455evb/m54455evb.c new file mode 100644 index 00000000000..1411a1a4c2d --- /dev/null +++ b/board/freescale/m54455evb/m54455evb.c @@ -0,0 +1,165 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +int checkboard(void) +{ + puts("Board: "); + puts("Freescale M54455 EVB\n"); + return 0; +}; + +long int initdram(int board_type) +{ + volatile sdramc_t *sdram = (volatile sdramc_t *)(MMAP_SDRAM); + volatile gpio_t *gpio = (volatile gpio_t *)(MMAP_GPIO); + u32 dramsize, i; + + dramsize = CFG_SDRAM_SIZE * 0x100000 >> 1; + + for (i = 0x13; i < 0x20; i++) { + if (dramsize == (1 << i)) + break; + } + i--; + + gpio->mscr_sdram = 0xAA; + + sdram->sdcs0 = (CFG_SDRAM_BASE | i); + sdram->sdcs1 = (CFG_SDRAM_BASE1 | i); + + sdram->sdcfg1 = CFG_SDRAM_CFG1; + sdram->sdcfg2 = CFG_SDRAM_CFG2; + + /* Issue PALL */ + sdram->sdcr = CFG_SDRAM_CTRL | 2; + + /* Issue LEMR */ + sdram->sdmr = CFG_SDRAM_EMOD | 0x408; + sdram->sdmr = CFG_SDRAM_MODE | 0x300; + + udelay(500); + + /* Issue PALL */ + sdram->sdcr = CFG_SDRAM_CTRL | 2; + + /* Perform two refresh cycles */ + sdram->sdcr = CFG_SDRAM_CTRL | 4; + sdram->sdcr = CFG_SDRAM_CTRL | 4; + + sdram->sdmr = CFG_SDRAM_MODE | 0x200; + + sdram->sdcr = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000c00; + + udelay(100); + + return (dramsize << 1); +}; + +int testdram(void) +{ + /* TODO: XXX XXX XXX */ + printf("DRAM test not implemented!\n"); + + return (0); +} + +#if defined(CONFIG_CMD_IDE) +#include + +int ide_preinit(void) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + gpio->par_fec |= (gpio->par_fec & GPIO_PAR_FEC_FEC1_MASK) | 0x10; + gpio->par_feci2c |= + (gpio->par_feci2c & 0xF0FF) | (GPIO_PAR_FECI2C_MDC1_ATA_DIOR | + GPIO_PAR_FECI2C_MDIO1_ATA_DIOW); + gpio->par_ata |= + (GPIO_PAR_ATA_BUFEN | GPIO_PAR_ATA_CS1 | GPIO_PAR_ATA_CS0 | + GPIO_PAR_ATA_DA2 | GPIO_PAR_ATA_DA1 | GPIO_PAR_ATA_DA0 + | GPIO_PAR_ATA_RESET_RESET | GPIO_PAR_ATA_DMARQ_DMARQ | + GPIO_PAR_ATA_IORDY_IORDY); + gpio->par_pci |= + (GPIO_PAR_PCI_GNT3_ATA_DMACK | GPIO_PAR_PCI_REQ3_ATA_INTRQ); + + return (0); +} + +void ide_set_reset(int idereset) +{ + volatile atac_t *ata = (atac_t *) MMAP_ATA; + long period; + /* t1, t2, t3, t4, t5, t6, t9, tRD, tA */ + int piotms[5][9] = { + {70, 165, 60, 30, 50, 5, 20, 0, 35}, /* PIO 0 */ + {50, 125, 45, 20, 35, 5, 15, 0, 35}, /* PIO 1 */ + {30, 100, 30, 15, 20, 5, 10, 0, 35}, /* PIO 2 */ + {30, 80, 30, 10, 20, 5, 10, 0, 35}, /* PIO 3 */ + {25, 70, 20, 10, 20, 5, 10, 0, 35} + }; /* PIO 4 */ + + if (idereset) { + ata->cr = 0; /* control reset */ + udelay(10000); + } else { +#define CALC_TIMING(t) (t + period - 1) / period + period = 1000000000 / gd->bus_clk; /* period in ns */ + + /*ata->ton = CALC_TIMING (180); */ + ata->t1 = CALC_TIMING(piotms[2][0]); + ata->t2w = CALC_TIMING(piotms[2][1]); + ata->t2r = CALC_TIMING(piotms[2][1]); + ata->ta = CALC_TIMING(piotms[2][8]); + ata->trd = CALC_TIMING(piotms[2][7]); + ata->t4 = CALC_TIMING(piotms[2][3]); + ata->t9 = CALC_TIMING(piotms[2][6]); + + ata->cr = 0x40; /* IORDY enable */ + udelay(200000); + ata->cr |= 0x01; /* IORDY enable */ + } +} +#endif + +#if defined(CONFIG_PCI) +/* + * Initialize PCI devices, report devices found. + */ +static struct pci_controller hose; +extern void pci_mcf5445x_init(struct pci_controller *hose); + +void pci_init_board(void) +{ + pci_mcf5445x_init(&hose); +} +#endif /* CONFIG_PCI */ + diff --git a/board/freescale/m54455evb/mii.c b/board/freescale/m54455evb/mii.c new file mode 100644 index 00000000000..c067183aadf --- /dev/null +++ b/board/freescale/m54455evb/mii.c @@ -0,0 +1,320 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) +#undef MII_DEBUG +#undef ET_DEBUG + +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + struct fec_info_s *info = (struct fec_info_s *)dev->priv; + + if (setclear) { + gpio->par_feci2c |= + (GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0); + + if (info->iobase == CFG_FEC0_IOBASE) + gpio->par_fec |= GPIO_PAR_FEC_FEC0_RMII_GPIO; + else + gpio->par_fec |= GPIO_PAR_FEC_FEC1_RMII_ATA; + } else { + gpio->par_feci2c &= + ~(GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0); + + if (info->iobase == CFG_FEC0_IOBASE) + gpio->par_fec &= GPIO_PAR_FEC_FEC0_MASK; + else + gpio->par_fec &= GPIO_PAR_FEC_FEC1_MASK; + } + return 0; +} + +#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) +#include + +/* Make MII read/write commands for the FEC. */ +#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) + +#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) + +/* PHY identification */ +#define PHY_ID_LXT970 0x78100000 /* LXT970 */ +#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ +#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ +#define PHY_ID_QS6612 0x01814400 /* QS6612 */ +#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ +#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ +#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ +#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ +#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ + +#define STR_ID_LXT970 "LXT970" +#define STR_ID_LXT971 "LXT971" +#define STR_ID_82555 "Intel82555" +#define STR_ID_QS6612 "QS6612" +#define STR_ID_AMD79C784 "AMD79C784" +#define STR_ID_LSI80225 "LSI80225" +#define STR_ID_LSI80225B "LSI80225/B" +#define STR_ID_DP83848VV "N83848" +#define STR_ID_DP83849 "N83849" + +/**************************************************************************** + * mii_init -- Initialize the MII for MII command without ethernet + * This function is a subset of eth_init + **************************************************************************** + */ +void mii_reset(struct fec_info_s *info) +{ + volatile fec_t *fecp = (fec_t *) (info->miibase); + struct eth_device *dev; + int i, miispd; + u16 rst = 0; + + dev = eth_get_dev(); + + miispd = (gd->bus_clk / 1000000) / 5; + fecp->mscr = miispd << 1; + + miiphy_write(dev->name, info->phy_addr, PHY_BMCR, PHY_BMCR_RESET); + for (i = 0; i < FEC_RESET_DELAY; ++i) { + udelay(500); + miiphy_read(dev->name, info->phy_addr, PHY_BMCR, &rst); + if ((rst & PHY_BMCR_RESET) == 0) + break; + } + if (i == FEC_RESET_DELAY) + printf("Mii reset timeout %d\n", i); +} + +/* send command to phy using mii, wait for result */ +uint mii_send(uint mii_cmd) +{ + struct fec_info_s *info; + struct eth_device *dev; + volatile fec_t *ep; + uint mii_reply; + int j = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + ep = (fec_t *) info->miibase; + + ep->mmfr = mii_cmd; /* command to phy */ + + /* wait for mii complete */ + while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { + udelay(1); + j++; + } + if (j >= MCFFEC_TOUT_LOOP) { + printf("MII not complete\n"); + return -1; + } + + mii_reply = ep->mmfr; /* result from phy */ + ep->eir = FEC_EIR_MII; /* clear MII complete */ +#ifdef ET_DEBUG + printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", + __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); +#endif + + return (mii_reply & 0xffff); /* data read from phy */ +} +#endif /* CFG_DISCOVER_PHY || (CONFIG_MII) */ + +#if defined(CFG_DISCOVER_PHY) +int mii_discover_phy(struct eth_device *dev) +{ +#define MAX_PHY_PASSES 11 + struct fec_info_s *info = dev->priv; + int phyaddr, pass; + uint phyno, phytype; + + if (info->phyname_init) + return info->phy_addr; + + phyaddr = -1; /* didn't find a PHY yet */ + for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { + if (pass > 1) { + /* PHY may need more time to recover from reset. + * The LXT970 needs 50ms typical, no maximum is + * specified, so wait 10ms before try again. + * With 11 passes this gives it 100ms to wake up. + */ + udelay(10000); /* wait 10ms */ + } + + for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { + + phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); +#ifdef ET_DEBUG + printf("PHY type 0x%x pass %d type\n", phytype, pass); +#endif + if (phytype != 0xffff) { + phyaddr = phyno; + phytype <<= 16; + phytype |= + mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); + + switch (phytype & 0xffffffff) { + case PHY_ID_DP83848VV: + strcpy(info->phy_name, + STR_ID_DP83848VV); + info->phyname_init = 1; + break; + default: + strcpy(info->phy_name, "unknown"); + info->phyname_init = 1; + break; + } + +#ifdef ET_DEBUG + printf("PHY @ 0x%x pass %d type ", phyno, pass); + switch (phytype & 0xffffffff) { + case PHY_ID_DP83848VV: + printf(STR_ID_DP83848VV); + break; + default: + printf("0x%08x\n", phytype); + break; + } +#endif + } + } + } + if (phyaddr < 0) + printf("No PHY device found.\n"); + + return phyaddr; +} +#endif /* CFG_DISCOVER_PHY */ + +int mii_init(void) __attribute__((weak,alias("__mii_init"))); + +void __mii_init(void) +{ + volatile fec_t *fecp; + struct fec_info_s *info; + struct eth_device *dev; + int miispd = 0, i = 0; + u16 autoneg = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + fecp = (fec_t *) info->miibase; + + /* We use strictly polling mode only */ + fecp->eimr = 0; + + /* Clear any pending interrupt */ + fecp->eir = 0xffffffff; + + /* Set MII speed */ + miispd = (gd->bus_clk / 1000000) / 5; + fecp->mscr = miispd << 1; + + info->phy_addr = mii_discover_phy(dev); + +#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) + while (i < MCFFEC_TOUT_LOOP) { + autoneg = 0; + miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); + i++; + + if ((autoneg & AUTONEGLINK) == AUTONEGLINK) + break; + + udelay(500); + } + if (i >= MCFFEC_TOUT_LOOP) { + printf("Auto Negotiation not complete\n"); + } + + /* adapt to the half/full speed settings */ + info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; + info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); +} + +/***************************************************************************** + * Read and write a MII PHY register, routines used by MII Utilities + * + * FIXME: These routines are expected to return 0 on success, but mii_send + * does _not_ return an error code. Maybe 0xFFFF means error, i.e. + * no PHY connected... + * For now always return 0. + * FIXME: These routines only work after calling eth_init() at least once! + * Otherwise they hang in mii_send() !!! Sorry! + *****************************************************************************/ + +int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, + unsigned short *value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); +#endif + rdreg = mii_send(mk_mii_read(addr, reg)); + + *value = rdreg; + +#ifdef MII_DEBUG + printf("0x%04x\n", *value); +#endif + + return 0; +} + +int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, + unsigned short value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); +#endif + + rdreg = mii_send(mk_mii_write(addr, reg, value)); + +#ifdef MII_DEBUG + printf("0x%04x\n", value); +#endif + + return 0; +} + +#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m54455evb/u-boot.lds b/board/freescale/m54455evb/u-boot.lds new file mode 100644 index 00000000000..bda68e4f824 --- /dev/null +++ b/board/freescale/m54455evb/u-boot.lds @@ -0,0 +1,144 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mcf5445x/start.o (.text) + lib_m68k/traps.o (.text) + lib_m68k/interrupts.o (.text) + common/dlmalloc.o (.text) + lib_generic/zlib.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + __got_start = .; + *(.got) + __got_end = .; + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + _sbss = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + _end = . ; + PROVIDE (end = .); +} diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index 889cff8411f..7686080f351 100644 --- a/common/cmd_bdinfo.c +++ b/common/cmd_bdinfo.c @@ -208,24 +208,36 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } #elif defined(CONFIG_M68K) /* M68K */ +static void print_str(const char *, const char *); int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { int i; bd_t *bd = gd->bd; + char buf[32]; + print_num ("memstart", (ulong)bd->bi_memstart); print_num ("memsize", (ulong)bd->bi_memsize); print_num ("flashstart", (ulong)bd->bi_flashstart); print_num ("flashsize", (ulong)bd->bi_flashsize); print_num ("flashoffset", (ulong)bd->bi_flashoffset); #if defined(CFG_INIT_RAM_ADDR) - print_num ("sramstart", (ulong)bd->bi_sramstart); - print_num ("sramsize", (ulong)bd->bi_sramsize); + print_num ("sramstart", (ulong)bd->bi_sramstart); + print_num ("sramsize", (ulong)bd->bi_sramsize); #endif #if defined(CFG_MBAR) - print_num ("mbar", bd->bi_mbar_base ); + print_num ("mbar", bd->bi_mbar_base); #endif -#if defined(CONFIG_CMD_NET) + print_str ("busfreq", strmhz(buf, bd->bi_busfreq)); +#ifdef CONFIG_PCI + print_str ("pcifreq", strmhz(buf, bd->bi_pcifreq)); +#endif +#ifdef CONFIG_EXTRA_CLOCK + print_str ("flbfreq", strmhz(buf, bd->bi_flbfreq)); + print_str ("inpfreq", strmhz(buf, bd->bi_inpfreq)); + print_str ("vcofreq", strmhz(buf, bd->bi_vcofreq)); +#endif +#if defined(CFG_CMD_NET) puts ("ethaddr ="); for (i=0; i<6; ++i) { printf ("%c%02X", i ? ':' : ' ', bd->bi_enetaddr[i]); @@ -323,7 +335,7 @@ static void print_num(const char *name, ulong value) printf ("%-12s= 0x%08lX\n", name, value); } -#ifdef CONFIG_PPC +#if defined(CONFIG_PPC) || defined(CONFIG_M68K) static void print_str(const char *name, const char *str) { printf ("%-12s= %6s MHz\n", name, str); diff --git a/cpu/mcf5445x/Makefile b/cpu/mcf5445x/Makefile new file mode 100644 index 00000000000..26ec29895ee --- /dev/null +++ b/cpu/mcf5445x/Makefile @@ -0,0 +1,48 @@ +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +# CFLAGS += -DET_DEBUG + +LIB = lib$(CPU).a + +START = start.o +COBJS = cpu.o speed.o cpu_init.o interrupts.o pci.o + +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/cpu/mcf5445x/config.mk b/cpu/mcf5445x/config.mk new file mode 100644 index 00000000000..d0c72fb6b0e --- /dev/null +++ b/cpu/mcf5445x/config.mk @@ -0,0 +1,27 @@ +# +# (C) Copyright 2003 Josef Baumgartner +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +PLATFORM_RELFLAGS += -ffixed-d7 -msep-data +PLATFORM_CPPFLAGS += -m5407 -fPIC diff --git a/cpu/mcf5445x/cpu.c b/cpu/mcf5445x/cpu.c new file mode 100644 index 00000000000..e601b8949b6 --- /dev/null +++ b/cpu/mcf5445x/cpu.c @@ -0,0 +1,97 @@ +/* + * + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include + +DECLARE_GLOBAL_DATA_PTR; + +int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[]) +{ + volatile rcm_t *rcm = (rcm_t *) (MMAP_RCM); + udelay(1000); + rcm->rcr |= RCM_RCR_SOFTRST; + + /* we don't return! */ + return 0; +}; + +int checkcpu(void) +{ + volatile ccm_t *ccm = (ccm_t *) MMAP_CCM; + u16 msk; + u16 id = 0; + u8 ver; + + puts("CPU: "); + msk = (ccm->cir >> 6); + ver = (ccm->cir & 0x003f); + switch (msk) { + case 0x48: + id = 54455; + break; + case 0x49: + id = 54454; + break; + case 0x4a: + id = 54453; + break; + case 0x4b: + id = 54452; + break; + case 0x4d: + id = 54451; + break; + case 0x4f: + id = 54450; + break; + } + + if (id) { + printf("Freescale MCF%d (Mask:%01x Version:%x)\n", id, msk, + ver); + printf(" CPU CLK %d Mhz BUS CLK %d Mhz FLB CLK %d Mhz\n", + (int)(gd->cpu_clk / 1000000), + (int)(gd->bus_clk / 1000000), + (int)(gd->flb_clk / 1000000)); +#ifdef CONFIG_PCI + printf(" PCI CLK %d Mhz INP CLK %d Mhz VCO CLK %d Mhz\n", + (int)(gd->pci_clk / 1000000), + (int)(gd->inp_clk / 1000000), + (int)(gd->vco_clk / 1000000)); +#else + printf(" INP CLK %d Mhz VCO CLK %d Mhz\n", + (int)(gd->inp_clk / 1000000), + (int)(gd->vco_clk / 1000000)); +#endif + } + + return 0; +} diff --git a/cpu/mcf5445x/cpu_init.c b/cpu/mcf5445x/cpu_init.c new file mode 100644 index 00000000000..6622eeea981 --- /dev/null +++ b/cpu/mcf5445x/cpu_init.c @@ -0,0 +1,140 @@ +/* + * + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#include +#include + +/* + * Breath some life into the CPU... + * + * Set up the memory map, + * initialize a bunch of registers, + * initialize the UPM's + */ +void cpu_init_f(void) +{ + volatile scm1_t *scm1 = (scm1_t *) MMAP_SCM1; + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; + + scm1->mpr = 0x77777777; + scm1->pacra = 0; + scm1->pacrb = 0; + scm1->pacrc = 0; + scm1->pacrd = 0; + scm1->pacre = 0; + scm1->pacrf = 0; + scm1->pacrg = 0; + + /* FlexBus */ + gpio->par_be = + GPIO_PAR_BE_BE3_BE3 | GPIO_PAR_BE_BE2_BE2 | GPIO_PAR_BE_BE1_BE1 | + GPIO_PAR_BE_BE0_BE0; + gpio->par_fbctl = + GPIO_PAR_FBCTL_OE | GPIO_PAR_FBCTL_TA_TA | GPIO_PAR_FBCTL_RW_RW | + GPIO_PAR_FBCTL_TS_TS; + +#if (defined(CFG_CS0_BASE) && defined(CFG_CS0_MASK) && defined(CFG_CS0_CTRL)) + fbcs->csar0 = CFG_CS0_BASE; + fbcs->cscr0 = CFG_CS0_CTRL; + fbcs->csmr0 = CFG_CS0_MASK; +#endif + +#if (defined(CFG_CS1_BASE) && defined(CFG_CS1_MASK) && defined(CFG_CS1_CTRL)) + /* Latch chipselect */ + fbcs->csar1 = CFG_CS1_BASE; + fbcs->cscr1 = CFG_CS1_CTRL; + fbcs->csmr1 = CFG_CS1_MASK; +#endif + +#if (defined(CFG_CS2_BASE) && defined(CFG_CS2_MASK) && defined(CFG_CS2_CTRL)) + fbcs->csar2 = CFG_CS2_BASE; + fbcs->cscr2 = CFG_CS2_CTRL; + fbcs->csmr2 = CFG_CS2_MASK; +#endif + +#if (defined(CFG_CS3_BASE) && defined(CFG_CS3_MASK) && defined(CFG_CS3_CTRL)) + fbcs->csar3 = CFG_CS3_BASE; + fbcs->cscr3 = CFG_CS3_CTRL; + fbcs->csmr3 = CFG_CS3_MASK; +#endif + +#if (defined(CFG_CS4_BASE) && defined(CFG_CS4_MASK) && defined(CFG_CS4_CTRL)) + fbcs->csar4 = CFG_CS4_BASE; + fbcs->cscr4 = CFG_CS4_CTRL; + fbcs->csmr4 = CFG_CS4_MASK; +#endif + +#if (defined(CFG_CS5_BASE) && defined(CFG_CS5_MASK) && defined(CFG_CS5_CTRL)) + fbcs->csar5 = CFG_CS5_BASE; + fbcs->cscr5 = CFG_CS5_CTRL; + fbcs->csmr5 = CFG_CS5_MASK; +#endif + +#ifdef CONFIG_FSL_I2C + gpio->par_feci2c = GPIO_PAR_FECI2C_SCL_SCL | GPIO_PAR_FECI2C_SDA_SDA; +#endif + + icache_enable(); +} + +/* + * initialize higher level parts of CPU like timers + */ +int cpu_init_r(void) +{ +#ifdef CONFIG_MCFTMR + volatile rtc_t *rtc = (volatile rtc_t *)(CFG_MCFRTC_BASE); + volatile rtcex_t *rtcex = (volatile rtcex_t *)&rtc->extended; + u32 oscillator = CFG_RTC_OSCILLATOR; + + rtcex->gocu = (CFG_RTC_OSCILLATOR >> 16) & 0xFFFF; + rtcex->gocl = CFG_RTC_OSCILLATOR & 0xFFFF; +#endif + + return (0); +} + +void uart_port_conf(void) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + /* Setup Ports: */ + switch (CFG_UART_PORT) { + case 0: + gpio->par_uart = + (GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD); + break; + case 1: + gpio->par_uart = + (GPIO_PAR_UART_U1TXD_U1TXD | GPIO_PAR_UART_U1RXD_U1RXD); + break; + } +} diff --git a/cpu/mcf5445x/interrupts.c b/cpu/mcf5445x/interrupts.c new file mode 100644 index 00000000000..9572a7bc32b --- /dev/null +++ b/cpu/mcf5445x/interrupts.c @@ -0,0 +1,52 @@ +/* + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* CPU specific interrupt routine */ +#include +#include + +int interrupt_init(void) +{ + volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE); + + /* Make sure all interrupts are disabled */ + intp->imrh0 |= 0xFFFFFFFF; + intp->imrl0 |= 0xFFFFFFFF; + + enable_interrupts(); + return 0; +} + +#if defined(CONFIG_MCFTMR) +void dtimer_intr_setup(void) +{ + volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE); + + intp->icr0[CFG_TMRINTR_NO] = CFG_TMRINTR_PRI; + intp->imrh0 &= ~CFG_TMRINTR_MASK; +} +#endif diff --git a/cpu/mcf5445x/pci.c b/cpu/mcf5445x/pci.c new file mode 100644 index 00000000000..8ace53630f8 --- /dev/null +++ b/cpu/mcf5445x/pci.c @@ -0,0 +1,189 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * PCI Configuration space access support + */ +#include +#include +#include +#include + +#if defined(CONFIG_PCI) +/* System RAM mapped over PCI */ +#define CFG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE +#define CFG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE +#define CFG_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024) + +#define cfg_read(val, addr, type, op) *val = op((type)(addr)); +#define cfg_write(val, addr, type, op) op((type *)(addr), (val)); + +#define PCI_OP(rw, size, type, op, mask) \ +int pci_##rw##_cfg_##size(struct pci_controller *hose, \ + pci_dev_t dev, int offset, type val) \ +{ \ + u32 addr = 0; \ + u16 cfg_type = 0; \ + addr = ((offset & 0xfc) | cfg_type | (dev) | 0x80000000); \ + out_be32(hose->cfg_addr, addr); \ + __asm__ __volatile__("nop"); \ + cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \ + out_be32(hose->cfg_addr, addr & 0x7fffffff); \ + __asm__ __volatile__("nop"); \ + return 0; \ +} + +PCI_OP(read, byte, u8 *, in_8, 3) +PCI_OP(read, word, u16 *, in_le16, 2) +PCI_OP(write, byte, u8, out_8, 3) +PCI_OP(write, word, u16, out_le16, 2) +PCI_OP(write, dword, u32, out_le32, 0) + +int pci_read_cfg_dword(struct pci_controller *hose, pci_dev_t dev, + int offset, u32 * val) +{ + u32 addr; + u32 tmpv; + u32 mask = 2; /* word access */ + /* Read lower 16 bits */ + addr = ((offset & 0xfc) | (dev) | 0x80000000); + out_be32(hose->cfg_addr, addr); + __asm__ __volatile__("nop"); + *val = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask))); + out_be32(hose->cfg_addr, addr & 0x7fffffff); + __asm__ __volatile__("nop"); + + /* Read upper 16 bits */ + offset += 2; + addr = ((offset & 0xfc) | 1 | (dev) | 0x80000000); + out_be32(hose->cfg_addr, addr); + __asm__ __volatile__("nop"); + tmpv = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask))); + out_be32(hose->cfg_addr, addr & 0x7fffffff); + __asm__ __volatile__("nop"); + + /* combine results into dword value */ + *val = (tmpv << 16) | *val; + + return 0; +} + +void pci_mcf5445x_init(struct pci_controller *hose) +{ + volatile pci_t *pci = (volatile pci_t *)MMAP_PCI; + volatile pciarb_t *pciarb = (volatile pciarb_t *)MMAP_PCIARB; + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + u32 barEn = 0; + + pciarb->acr = 0x001f001f; + + /* Set PCIGNT1, PCIREQ1, PCIREQ0/PCIGNTIN, PCIGNT0/PCIREQOUT, + PCIREQ2, PCIGNT2 */ + gpio->par_pci = + GPIO_PAR_PCI_GNT3_GNT3 | GPIO_PAR_PCI_GNT2 | GPIO_PAR_PCI_GNT1 | + GPIO_PAR_PCI_GNT0 | GPIO_PAR_PCI_REQ3_REQ3 | GPIO_PAR_PCI_REQ2 | + GPIO_PAR_PCI_REQ1 | GPIO_PAR_PCI_REQ0; + + pci->tcr1 |= PCI_TCR1_P; + + /* Initiator windows */ + pci->iw0btar = CFG_PCI_MEM_PHYS; + pci->iw1btar = CFG_PCI_IO_PHYS; + pci->iw2btar = CFG_PCI_CFG_PHYS; + + pci->iwcr = + PCI_IWCR_W0C_EN | PCI_IWCR_W1C_EN | PCI_IWCR_W1C_IO | + PCI_IWCR_W2C_EN | PCI_IWCR_W2C_IO; + + /* Enable bus master and mem access */ + pci->scr = PCI_SCR_MW | PCI_SCR_B | PCI_SCR_M; + + /* Cache line size and master latency */ + pci->cr1 = PCI_CR1_CLS(8) | PCI_CR1_LTMR(0xFF); + pci->cr2 = 0; + +#ifdef CFG_PCI_BAR0 + pci->bar0 = PCI_BAR_BAR0(CFG_PCI_BAR0); + pci->tbatr0 = CFG_PCI_TBATR0 | PCI_TBATR_EN; + barEn |= PCI_TCR1_B0E; +#endif +#ifdef CFG_PCI_BAR1 + pci->bar1 = PCI_BAR_BAR1(CFG_PCI_BAR1); + pci->tbatr1 = CFG_PCI_TBATR1 | PCI_TBATR_EN; + barEn |= PCI_TCR1_B1E; +#endif +#ifdef CFG_PCI_BAR2 + pci->bar2 = PCI_BAR_BAR2(CFG_PCI_BAR2); + pci->tbatr2 = CFG_PCI_TBATR2 | PCI_TBATR_EN; + barEn |= PCI_TCR1_B2E; +#endif +#ifdef CFG_PCI_BAR3 + pci->bar3 = PCI_BAR_BAR3(CFG_PCI_BAR3); + pci->tbatr3 = CFG_PCI_TBATR3 | PCI_TBATR_EN; + barEn |= PCI_TCR1_B3E; +#endif +#ifdef CFG_PCI_BAR4 + pci->bar4 = PCI_BAR_BAR4(CFG_PCI_BAR4); + pci->tbatr4 = CFG_PCI_TBATR4 | PCI_TBATR_EN; + barEn |= PCI_TCR1_B4E; +#endif +#ifdef CFG_PCI_BAR5 + pci->bar5 = PCI_BAR_BAR5(CFG_PCI_BAR5); + pci->tbatr5 = CFG_PCI_TBATR5 | PCI_TBATR_EN; + barEn |= PCI_TCR1_B5E; +#endif + + pci->tcr2 = barEn; + + /* Deassert reset bit */ + pci->gscr &= ~PCI_GSCR_PR; + udelay(1000); + + /* Enable PCI bus master support */ + hose->first_busno = 0; + hose->last_busno = 0xff; + + pci_set_region(hose->regions + 0, CFG_PCI_MEM_BUS, CFG_PCI_MEM_PHYS, + CFG_PCI_MEM_SIZE, PCI_REGION_MEM); + + pci_set_region(hose->regions + 1, CFG_PCI_IO_BUS, CFG_PCI_IO_PHYS, + CFG_PCI_IO_SIZE, PCI_REGION_IO); + + pci_set_region(hose->regions + 2, CFG_PCI_SYS_MEM_BUS, + CFG_PCI_SYS_MEM_PHYS, CFG_PCI_SYS_MEM_SIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + hose->region_count = 3; + + hose->cfg_addr = &(pci->car); + hose->cfg_data = (volatile unsigned char *)CFG_PCI_CFG_BUS; + + pci_set_ops(hose, pci_read_cfg_byte, pci_read_cfg_word, + pci_read_cfg_dword, pci_write_cfg_byte, pci_write_cfg_word, + pci_write_cfg_dword); + + /* Hose scan */ + pci_register_hose(hose); + hose->last_busno = pci_hose_scan(hose); +} +#endif /* CONFIG_PCI */ diff --git a/cpu/mcf5445x/speed.c b/cpu/mcf5445x/speed.c new file mode 100644 index 00000000000..967becfdd07 --- /dev/null +++ b/cpu/mcf5445x/speed.c @@ -0,0 +1,186 @@ +/* + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#include + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Low Power Divider specifications + */ +#define CLOCK_LPD_MIN (1 << 0) /* Divider (decoded) */ +#define CLOCK_LPD_MAX (1 << 15) /* Divider (decoded) */ + +#define CLOCK_PLL_FVCO_MAX 540000000 +#define CLOCK_PLL_FVCO_MIN 300000000 + +#define CLOCK_PLL_FSYS_MAX 266666666 +#define CLOCK_PLL_FSYS_MIN 100000000 +#define MHZ 1000000 + +void clock_enter_limp(int lpdiv) +{ + volatile ccm_t *ccm = (volatile ccm_t *)MMAP_CCM; + int i, j; + + /* Check bounds of divider */ + if (lpdiv < CLOCK_LPD_MIN) + lpdiv = CLOCK_LPD_MIN; + if (lpdiv > CLOCK_LPD_MAX) + lpdiv = CLOCK_LPD_MAX; + + /* Round divider down to nearest power of two */ + for (i = 0, j = lpdiv; j != 1; j >>= 1, i++) ; + + /* Apply the divider to the system clock */ + ccm->cdr = (ccm->cdr & 0xF0FF) | CCM_CDR_LPDIV(i); + + /* Enable Limp Mode */ + ccm->misccr |= CCM_MISCCR_LIMP; +} + +/* + * brief Exit Limp mode + * warning The PLL should be set and locked prior to exiting Limp mode + */ +void clock_exit_limp(void) +{ + volatile ccm_t *ccm = (volatile ccm_t *)MMAP_CCM; + volatile pll_t *pll = (volatile pll_t *)MMAP_PLL; + + /* Exit Limp mode */ + ccm->misccr &= ~CCM_MISCCR_LIMP; + + /* Wait for the PLL to lock */ + while (!(pll->psr & PLL_PSR_LOCK)) ; +} + +/* + * get_clocks() fills in gd->cpu_clock and gd->bus_clk + */ +int get_clocks(void) +{ + volatile ccm_t *ccm = (volatile ccm_t *)MMAP_CCM; + volatile pll_t *pll = (volatile pll_t *)MMAP_PLL; + volatile u8 *cpld = (volatile u8 *)(CFG_CS2_BASE + 3); + volatile u8 *fpga = (volatile u8 *)(CFG_CS3_BASE + 14); + int pllmult_nopci[] = { 20, 10, 24, 18, 12, 6, 16, 8 }; + int pllmult_pci[] = { 12, 6, 16, 8 }; + int vco, bPci, temp, fbtemp, pcrvalue; + int *pPllmult = NULL; + u16 fbpll_mask; + u8 cpldmode; + + /* To determine PCI is present or not */ + if (((ccm->ccr & CCM_CCR_360_FBCONFIG_MASK) == 0x00e0) || + ((ccm->ccr & CCM_CCR_360_FBCONFIG_MASK) == 0x0060)) { + pPllmult = &pllmult_pci[0]; + fbpll_mask = 3; + bPci = 1; + } else { + pPllmult = &pllmult_nopci[0]; + fbpll_mask = 7; +#ifdef CONFIG_PCI + gd->pci_clk = 0; +#endif + bPci = 0; + } + +#ifdef CONFIG_M54455EVB + /* Temporary place here, belongs in board/freescale/... */ + /* Temporary read from CCR- fixed fb issue, must be the same clock + as pci or input clock, causing cpld/fpga read inconsistancy */ + fbtemp = pPllmult[ccm->ccr & fbpll_mask]; + + /* Break down into small pieces, code still in flex bus */ + pcrvalue = pll->pcr & 0xFFFFF0FF; + temp = fbtemp - 1; + pcrvalue |= PLL_PCR_OUTDIV3(temp); + + pll->pcr = pcrvalue; + + cpldmode = *cpld & 0x03; + if (cpldmode == 0) { + /* RCON mode */ + vco = pPllmult[ccm->rcon & fbpll_mask] * CFG_INPUT_CLKSRC; + + if ((vco < CLOCK_PLL_FVCO_MIN) || (vco > CLOCK_PLL_FVCO_MAX)) { + /* invaild range, re-set in PCR */ + int temp = ((pll->pcr & PLL_PCR_OUTDIV2_MASK) >> 4) + 1; + int i, j, bus; + + j = (pll->pcr & 0xFF000000) >> 24; + for (i = j; i < 0xFF; i++) { + vco = i * CFG_INPUT_CLKSRC; + if (vco >= CLOCK_PLL_FVCO_MIN) { + bus = vco / temp; + if (bus <= CLOCK_PLL_FSYS_MIN - MHZ) + continue; + else + break; + } + } + pcrvalue = pll->pcr & 0x00FF00FF; + fbtemp = ((i - 1) << 8) | ((i - 1) << 12); + pcrvalue |= ((i << 24) | fbtemp); + + pll->pcr = pcrvalue; + } + gd->vco_clk = vco; /* Vco clock */ + } else if (cpldmode == 2) { + /* Normal mode */ + vco = pPllmult[ccm->ccr & fbpll_mask] * CFG_INPUT_CLKSRC; + gd->vco_clk = vco; /* Vco clock */ + } else if (cpldmode == 3) { + /* serial mode */ + } +#endif /* CONFIG_M54455EVB */ + + if ((ccm->ccr & CCM_MISCCR_LIMP) == CCM_MISCCR_LIMP) { + /* Limp mode */ + } else { + gd->inp_clk = CFG_INPUT_CLKSRC; /* Input clock */ + + temp = (pll->pcr & PLL_PCR_OUTDIV1_MASK) + 1; + gd->cpu_clk = vco / temp; /* cpu clock */ + + temp = ((pll->pcr & PLL_PCR_OUTDIV2_MASK) >> 4) + 1; + gd->bus_clk = vco / temp; /* bus clock */ + + temp = ((pll->pcr & PLL_PCR_OUTDIV3_MASK) >> 8) + 1; + gd->flb_clk = vco / temp; /* FlexBus clock */ + +#ifdef CONFIG_PCI + if (bPci) { + temp = ((pll->pcr & PLL_PCR_OUTDIV4_MASK) >> 12) + 1; + gd->pci_clk = vco / temp; /* PCI clock */ + } +#endif + } + + return (0); +} diff --git a/cpu/mcf5445x/start.S b/cpu/mcf5445x/start.S new file mode 100644 index 00000000000..cd989ab6261 --- /dev/null +++ b/cpu/mcf5445x/start.S @@ -0,0 +1,388 @@ +/* + * Copyright (C) 2003 Josef Baumgartner + * Based on code from Bernhard Kuhn + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include "version.h" + +#ifndef CONFIG_IDENT_STRING +#define CONFIG_IDENT_STRING "" +#endif + +/* last three long word reserved for cache status */ +#define CACR_STATUS (CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-12) +#define ICACHE_STATUS (CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END- 8) +#define DCACHE_STATUS (CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END- 4) + +#define _START _start +#define _FAULT _fault + +#define SAVE_ALL \ + move.w #0x2700,%sr; /* disable intrs */ \ + subl #60,%sp; /* space for 15 regs */ \ + moveml %d0-%d7/%a0-%a6,%sp@; + +#define RESTORE_ALL \ + moveml %sp@,%d0-%d7/%a0-%a6; \ + addl #60,%sp; /* space for 15 regs */ \ + rte; + +.text +/* + * Vector table. This is used for initial platform startup. + * These vectors are to catch any un-intended traps. + */ +_vectors: + +INITSP: .long 0x00000000 /* Initial SP */ +INITPC: .long _START /* Initial PC */ +vector02: .long _FAULT /* Access Error */ +vector03: .long _FAULT /* Address Error */ +vector04: .long _FAULT /* Illegal Instruction */ +vector05: .long _FAULT /* Reserved */ +vector06: .long _FAULT /* Reserved */ +vector07: .long _FAULT /* Reserved */ +vector08: .long _FAULT /* Privilege Violation */ +vector09: .long _FAULT /* Trace */ +vector0A: .long _FAULT /* Unimplemented A-Line */ +vector0B: .long _FAULT /* Unimplemented F-Line */ +vector0C: .long _FAULT /* Debug Interrupt */ +vector0D: .long _FAULT /* Reserved */ +vector0E: .long _FAULT /* Format Error */ +vector0F: .long _FAULT /* Unitialized Int. */ + +/* Reserved */ +vector10_17: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +vector18: .long _FAULT /* Spurious Interrupt */ +vector19: .long _FAULT /* Autovector Level 1 */ +vector1A: .long _FAULT /* Autovector Level 2 */ +vector1B: .long _FAULT /* Autovector Level 3 */ +vector1C: .long _FAULT /* Autovector Level 4 */ +vector1D: .long _FAULT /* Autovector Level 5 */ +vector1E: .long _FAULT /* Autovector Level 6 */ +vector1F: .long _FAULT /* Autovector Level 7 */ + +/* TRAP #0 - #15 */ +vector20_2F: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +/* Reserved */ +vector30_3F: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +vector64_127: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +vector128_191: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +vector192_255: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + + .text + + .globl _start +_start: + nop + nop + move.w #0x2700,%sr /* Mask off Interrupt */ + + /* Set vector base register at the beginning of the Flash */ + move.l #CFG_FLASH_BASE, %d0 + movec %d0, %VBR + + move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_RAM_CTRL), %d0 + movec %d0, %RAMBAR0 + + /* initialize general use internal ram */ + move.l #0, %d0 + move.l #(CACR_STATUS), %a1 /* CACR */ + move.l #(ICACHE_STATUS), %a2 /* icache */ + move.l #(DCACHE_STATUS), %a3 /* dcache */ + move.l %d0, (%a1) + move.l %d0, (%a2) + move.l %d0, (%a3) + + /* invalidate and disable cache */ + move.l #0x01004100, %d0 /* Invalidate cache cmd */ + movec %d0, %CACR /* Invalidate cache */ + move.l #0, %d0 + movec %d0, %ACR0 + movec %d0, %ACR1 + movec %d0, %ACR2 + movec %d0, %ACR3 + + /* set stackpointer to end of internal ram to get some stackspace for + the first c-code */ + move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET), %sp + clr.l %sp@- + + move.l #__got_start, %a5 /* put relocation table address to a5 */ + + bsr cpu_init_f /* run low-level CPU init code (from flash) */ + bsr board_init_f /* run low-level board init code (from flash) */ + + /* board_init_f() does not return */ + +/*------------------------------------------------------------------------------*/ + +/* + * void relocate_code (addr_sp, gd, addr_moni) + * + * This "function" does not return, instead it continues in RAM + * after relocating the monitor code. + * + * r3 = dest + * r4 = src + * r5 = length in bytes + * r6 = cachelinesize + */ + .globl relocate_code +relocate_code: + link.w %a6,#0 + move.l 8(%a6), %sp /* set new stack pointer */ + + move.l 12(%a6), %d0 /* Save copy of Global Data pointer */ + move.l 16(%a6), %a0 /* Save copy of Destination Address */ + + move.l #CFG_MONITOR_BASE, %a1 + move.l #__init_end, %a2 + move.l %a0, %a3 + + /* copy the code to RAM */ +1: + move.l (%a1)+, (%a3)+ + cmp.l %a1,%a2 + bgt.s 1b + +/* + * We are done. Do not return, instead branch to second part of board + * initialization, now running from RAM. + */ + move.l %a0, %a1 + add.l #(in_ram - CFG_MONITOR_BASE), %a1 + jmp (%a1) + +in_ram: + +clear_bss: + /* + * Now clear BSS segment + */ + move.l %a0, %a1 + add.l #(_sbss - CFG_MONITOR_BASE),%a1 + move.l %a0, %d1 + add.l #(_ebss - CFG_MONITOR_BASE),%d1 +6: + clr.l (%a1)+ + cmp.l %a1,%d1 + bgt.s 6b + + /* + * fix got table in RAM + */ + move.l %a0, %a1 + add.l #(__got_start - CFG_MONITOR_BASE),%a1 + move.l %a1,%a5 /* * fix got pointer register a5 */ + + move.l %a0, %a2 + add.l #(__got_end - CFG_MONITOR_BASE),%a2 + +7: + move.l (%a1),%d1 + sub.l #_start,%d1 + add.l %a0,%d1 + move.l %d1,(%a1)+ + cmp.l %a2, %a1 + bne 7b + + /* calculate relative jump to board_init_r in ram */ + move.l %a0, %a1 + add.l #(board_init_r - CFG_MONITOR_BASE), %a1 + + /* set parameters for board_init_r */ + move.l %a0,-(%sp) /* dest_addr */ + move.l %d0,-(%sp) /* gd */ + jsr (%a1) + +/*------------------------------------------------------------------------------*/ +/* exception code */ + .globl _fault +_fault: + jmp _fault + .globl _exc_handler + +_exc_handler: + SAVE_ALL + movel %sp,%sp@- + bsr exc_handler + addql #4,%sp + RESTORE_ALL + + .globl _int_handler +_int_handler: + SAVE_ALL + movel %sp,%sp@- + bsr int_handler + addql #4,%sp + RESTORE_ALL + +/*------------------------------------------------------------------------------*/ +/* cache functions */ + .globl icache_enable +icache_enable: + move.l #(CACR_STATUS), %a1 /* read CACR Status */ + move.l (%a1), %d1 + + move.l #0x00040100, %d0 /* Invalidate icache */ + or.l %d1, %d0 + movec %d0, %CACR + + move.l #(CFG_SDRAM_BASE + 0xc000), %d0 /* Setup icache */ + movec %d0, %ACR2 + + or.l #0x00088400, %d1 /* Enable bcache and icache */ + movec %d1, %CACR + + move.l #(ICACHE_STATUS), %a1 + moveq #1, %d0 + move.l %d0, (%a1) + rts + + .globl icache_disable +icache_disable: + move.l #(CACR_STATUS), %a1 /* read CACR Status */ + move.l (%a1), %d0 + + and.l #0xFFF77BFF, %d0 + or.l #0x00040100, %d0 /* Setup cache mask */ + movec %d0, %CACR /* Invalidate icache */ + clr.l %d0 + movec %d0, %ACR2 + movec %d0, %ACR3 + + move.l #(ICACHE_STATUS), %a1 + moveq #0, %d0 + move.l %d0, (%a1) + rts + + .globl icache_status +icache_status: + move.l #(ICACHE_STATUS), %a1 + move.l (%a1), %d0 + rts + + .globl icache_invalid +icache_invalid: + move.l #(CACR_STATUS), %a1 /* read CACR Status */ + move.l (%a1), %d0 + + or.l #0x00040100, %d0 /* Invalidate icache */ + movec %d0, %CACR /* Enable and invalidate cache */ + rts + + .globl dcache_enable +dcache_enable: + move.l #(CACR_STATUS), %a1 /* read CACR Status */ + move.l (%a1), %d1 + + move.l #0x01000000, %d0 + or.l %d1, %d0 + movec %d0, %CACR /* Invalidate dcache */ + + move.l #(CFG_SDRAM_BASE + 0xc000), %d0 + movec %d0, %ACR0 + move.l #0, %d0 + movec %d0, %ACR1 + + or.l #0x80000000, %d1 /* Enable bcache and icache */ + movec %d1, %CACR + + move.l #(DCACHE_STATUS), %a1 + moveq #1, %d0 + move.l %d0, (%a1) + rts + + .globl dcache_disable +dcache_disable: + move.l #(CACR_STATUS), %a1 /* read CACR Status */ + move.l (%a1), %d0 + + and.l #0x7FFFFFFF, %d0 + or.l #0x01000000, %d0 /* Setup cache mask */ + movec %d0, %CACR /* Disable dcache */ + clr.l %d0 + movec %d0, %ACR0 + movec %d0, %ACR1 + + move.l #(DCACHE_STATUS), %a1 + moveq #0, %d0 + move.l %d0, (%a1) + rts + + .globl dcache_invalid +dcache_invalid: + move.l #(CACR_STATUS), %a1 /* read CACR Status */ + move.l (%a1), %d0 + + or.l #0x01000000, %d0 /* Setup cache mask */ + movec %d0, %CACR /* Enable and invalidate cache */ + rts + + .globl dcache_status +dcache_status: + move.l #(DCACHE_STATUS), %a1 + move.l (%a1), %d0 + rts + +/*------------------------------------------------------------------------------*/ + + .globl version_string +version_string: + .ascii U_BOOT_VERSION + .ascii " (", __DATE__, " - ", __TIME__, ")" + .ascii CONFIG_IDENT_STRING, "\0" diff --git a/doc/README.m54455evb b/doc/README.m54455evb new file mode 100644 index 00000000000..c768fc8a409 --- /dev/null +++ b/doc/README.m54455evb @@ -0,0 +1,416 @@ +Freescale MCF54455EVB ColdFire Development Board +================================================ + +TsiChung Liew(Tsi-Chung.Liew@freescale.com) +Created 4/08/07 +=========================================== + + +Changed files: +============== + +- board/freescale/m54455evb/m54455evb.c Dram setup, IDE pre init, and PCI init +- board/freescale/m54455evb/flash.c Atmel and INTEL flash support +- board/freescale/m54455evb/Makefile Makefile +- board/freescale/m54455evb/config.mk config make +- board/freescale/m54455evb/u-boot.lds Linker description + +- common/cmd_bdinfo.c Clock frequencies output +- common/cmd_mii.c mii support + +- cpu/mcf5445x/cpu.c cpu specific code +- cpu/mcf5445x/cpu_init.c Flexbus ChipSelect, Mux pins setup, icache and RTC extra regs +- cpu/mcf5445x/interrupts.c cpu specific interrupt support +- cpu/mcf5445x/speed.c system, pci, flexbus, and cpu clock +- cpu/mcf5445x/Makefile Makefile +- cpu/mcf5445x/config.mk config make +- cpu/mcf5445x/start.S start up assembly code + +- doc/README.m54455evb This readme file + +- drivers/net/mcffec.c ColdFire common FEC driver +- drivers/serial/mcfuart.c ColdFire common UART driver + +- include/asm-m68k/bitops.h Bit operation function export +- include/asm-m68k/byteorder.h Byte order functions +- include/asm-m68k/fec.h FEC structure and definition +- include/asm-m68k/fsl_i2c.h I2C structure and definition +- include/asm-m68k/global_data.h Global data structure +- include/asm-m68k/immap.h ColdFire specific header file and driver macros +- include/asm-m68k/immap_5445x.h mcf5445x specific header file +- include/asm-m68k/io.h io functions +- include/asm-m68k/m5445x.h mcf5445x specific header file +- include/asm-m68k/posix_types.h Posix +- include/asm-m68k/processor.h header file +- include/asm-m68k/ptrace.h Exception structure +- include/asm-m68k/rtc.h Realtime clock header file +- include/asm-m68k/string.h String function export +- include/asm-m68k/timer.h Timer structure and definition +- include/asm-m68k/types.h Data types definition +- include/asm-m68k/uart.h Uart structure and definition +- include/asm-m68k/u-boot.h u-boot structure + +- include/configs/M54455EVB.h Board specific configuration file + +- lib_m68k/board.c board init function +- lib_m68k/cache.c +- lib_m68k/interrupts Coldfire common interrupt functions +- lib_m68k/m68k_linux.c +- lib_m68k/time.c Timer functions (Dma timer and PIT) +- lib_m68k/traps.c Exception init code + +- rtc/mcfrtc.c Realtime clock Driver + +1 MCF5445x specific Options/Settings +==================================== +1.1 pre-loader is no longer suppoer in thie coldfire family + +1.2 Configuration settings for M54455EVB Development Board +CONFIG_MCF5445x -- define for all MCF5445x CPUs +CONFIG_M54455 -- define for all Freescale MCF54455 CPUs +CONFIG_M54455EVB -- define for M54455EVB board + +CONFIG_MCFUART -- define to use common CF Uart driver +CFG_UART_PORT -- define UART port number, start with 0, 1 and 2 +CONFIG_BAUDRATE -- define UART baudrate + +CONFIG_MCFRTC -- define to use common CF RTC driver +CFG_MCFRTC_BASE -- provide base address for RTC in immap.h +CFG_RTC_OSCILLATOR -- define RTC clock frequency +RTC_DEBUG -- define to show RTC debug message +CFG_CMD_DATE -- enable to use date feature in u-boot + +CONFIG_MCFFEC -- define to use common CF FEC driver +CONFIG_NET_MULTI -- define to use multi FEC in u-boot +CONFIG_MII -- enable to use MII driver +CONFIG_CF_DOMII -- enable to use MII feature in cmd_mii.c +CFG_DISCOVER_PHY -- enable PHY discovery +CFG_RX_ETH_BUFFER -- Set FEC Receive buffer +CFG_FAULT_ECHO_LINK_DOWN-- +CFG_FEC0_PINMUX -- Set FEC0 Pin configuration +CFG_FEC1_PINMUX -- Set FEC1 Pin configuration +CFG_FEC0_MIIBASE -- Set FEC0 MII base register +CFG_FEC1_MIIBASE -- Set FEC0 MII base register +MCFFEC_TOUT_LOOP -- set FEC timeout loop +CONFIG_HAS_ETH1 -- define to enable second FEC in u-boot + +CONFIG_ISO_PARTITION -- enable ISO read/write +CONFIG_DOS_PARTITION -- enable DOS read/write +CONFIG_IDE_RESET -- define ide_reset() +CONFIG_IDE_PREINIT -- define ide_preinit() +CONFIG_ATAPI -- define ATAPI support +CONFIG_LBA48 -- define LBA48 (larger than 120GB) support +CFG_IDE_MAXBUS -- define max channel +CFG_IDE_MAXDEVICE -- define max devices per channel +CFG_ATA_BASE_ADDR -- define ATA base address +CFG_ATA_IDE0_OFFSET -- define ATA IDE0 offset +CFG_ATA_DATA_OFFSET -- define ATA data IO +CFG_ATA_REG_OFFSET -- define for normal register accesses +CFG_ATA_ALT_OFFSET -- define for alternate registers +CFG_ATA_STRIDE -- define for Interval between registers +_IO_BASE -- define for IO base address + +CONFIG_MCFTMR -- define to use DMA timer +CONFIG_MCFPIT -- define to use PIT timer + +CONFIG_FSL_I2C -- define to use FSL common I2C driver +CONFIG_HARD_I2C -- define for I2C hardware support +CONFIG_SOFT_I2C -- define for I2C bit-banged +CFG_I2C_SPEED -- define for I2C speed +CFG_I2C_SLAVE -- define for I2C slave address +CFG_I2C_OFFSET -- define for I2C base address offset +CFG_IMMR -- define for MBAR offset + +CONFIG_PCI -- define for PCI support +CONFIG_PCI_PNP -- define for Plug n play support +CFG_PCI_MEM_BUS -- PCI memory logical offset +CFG_PCI_MEM_PHYS -- PCI memory physical offset +CFG_PCI_MEM_SIZE -- PCI memory size +CFG_PCI_IO_BUS -- PCI IO logical offset +CFG_PCI_IO_PHYS -- PCI IO physical offset +CFG_PCI_IO_SIZE -- PCI IO size +CFG_PCI_CFG_BUS -- PCI Configuration logical offset +CFG_PCI_CFG_PHYS -- PCI Configuration physical offset +CFG_PCI_CFG_SIZE -- PCI Configuration size + +CONFIG_EXTRA_CLOCK -- Enable extra clock such as vco, flexbus, pci, etc + +CFG_MBAR -- define MBAR offset + +CFG_ATMEL_BOOT -- To determine the u-boot is booted from Atmel or Intel + +CONFIG_MONITOR_IS_IN_RAM -- Not support + +CFG_INIT_RAM_ADDR -- defines the base address of the MCF54455 internal SRAM + +CFG_CSn_BASE -- defines the Chip Select Base register +CFG_CSn_MASK -- defines the Chip Select Mask register +CFG_CSn_CTRL -- defines the Chip Select Control register + +CFG_ATMEL_BASE -- defines the Atmel Flash base +CFG_INTEL_BASE -- defines the Intel Flash base + +CFG_SDRAM_BASE -- defines the DRAM Base +CFG_SDRAM_BASE1 -- defines the DRAM Base 1 + +2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL +=========================================== +2.1. System memory map: + Flash: 0x00000000-0x3FFFFFFF (1024MB) + DDR: 0x40000000-0x7FFFFFFF (1024MB) + SRAM: 0x80000000-0x8FFFFFFF (256MB) + ATA: 0x90000000-0x9FFFFFFF (256MB) + PCI: 0xA0000000-0xBFFFFFFF (512MB) + FlexBus: 0xC0000000-0xDFFFFFFF (512MB) + IP: 0xF0000000-0xFFFFFFFF (256MB) + +2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and + linux kernel, you can customize it based on your system requirements: + Atmel boot: + Flash0: 0x00000000-0x0007FFFF (512KB) + Flash1: 0x04000000-0x05FFFFFF (32MB) + Intel boot: + Flash0: 0x00000000-0x01FFFFFF (32MB) + Flash1: 0x04000000-0x0407FFFF (512KB) + + CPLD: 0x08000000-0x08FFFFFF (16MB) + FPGA: 0x09000000-0x09FFFFFF (16MB) + DDR: 0x40000000-0x4FFFFFFF (256MB) + SRAM: 0x80000000-0x80007FFF (32KB) + IP: 0xFC000000-0xFC0FFFFF (64KB) + +3. SWITCH SETTINGS +================== +3.1 SW1 Pin3: 0 - Boot from Atmel or 1 - INTEL + SW1 Pin4: 0 - ULPI chip not in reset state or 1 - ULPI chip in reset state + SW1 Pin5: 0 - Full ATA Bus enabled, FEC Phy1 powered down + 1 - Upper 8 bits ATA data bus disabled, FEC PHY1 active + SW1 Pin6: 0 - FEC Phy0 active or 1 - FEC Phy0 powered down + SW1 Pin3: 0 - Boot from Atmel or 1 - INTEL + +4. COMPILATION +============== +4.1 To create U-Boot the gcc-4.1-32 compiler set (ColdFire ELF version) +from codesourcery.com was used. Download it from: +http://www.codesourcery.com/gnu_toolchains/coldfire/download.html + +4.2 Compilation + export CROSS_COMPILE=cross-compile-prefix + cd u-boot-1.x.x + make distclean + make M54455EVB_config, or - default to atmel 33Mhz input clock + make M54455EVB_atmel_config, or - default to atmel 33Mhz input clock + make M54455EVB_a33_config, or - default to atmel 33Mhz input clock + make M54455EVB_a66_config, or - default to atmel 66Mhz input clock + make M54455EVB_intel_config, or - default to intel 33Mhz input clock + make M54455EVB_i33_config, or - default to intel 33Mhz input clock + make M54455EVB_i66_config, or - default to intel 66Mhz input clock + make + +5. SCREEN DUMP +============== +5.1 M54455EVB Development board + Boot from Atmel (NOTE: May not show exactly the same) + +U-Boot 1.2.0-g98c80b46-dirty (Jul 26 2007 - 12:44:08) + +CPU: Freescale MCF54455 (Mask:48 Version:1) + CPU CLK 266 Mhz BUS CLK 133 Mhz FLB CLK 66 Mhz + PCI CLK 33 Mhz INP CLK 33 Mhz VCO CLK 533 Mhz +Board: Freescale M54455 EVB +I2C: ready +DRAM: 256 MB +FLASH: 16.5 MB +In: serial +Out: serial +Err: serial +Net: FEC0, FEC1 +IDE: Bus 0: not available +-> print +bootargs=root=/dev/ram rw +bootdelay=1 +baudrate=115200 +ethaddr=00:e0:0c:bc:e5:60 +eth1addr=00:e0:0c:bc:e5:61 +hostname=M54455EVB +netdev=eth0 +inpclk=33333333 +loadaddr=40010000 +load=tftp ${loadaddr) ${u-boot} +upd=run load; run prog +prog=prot off 0 2ffff;era 0 2ffff;cp.b ${loadaddr} 0 ${filesize};save +ethact=FEC0 +mtdids=nor0=M54455EVB-1 +mtdparts=M54455EVB-1:16m(user) +u-boot=u-boot54455.bin +filesize=292b4 +fileaddr=40010000 +gatewayip=192.168.1.1 +netmask=255.255.255.0 +ipaddr=192.168.1.3 +serverip=192.168.1.2 +stdin=serial +stdout=serial +stderr=serial +mem=261632k + +Environment size: 563/8188 bytes +-> bdinfo +memstart = 0x40000000 +memsize = 0x10000000 +flashstart = 0x00000000 +flashsize = 0x01080000 +flashoffset = 0x00000000 +sramstart = 0x80000000 +sramsize = 0x00008000 +mbar = 0xFC000000 +busfreq = 133.333 MHz +pcifreq = 33.333 MHz +flbfreq = 66.666 MHz +inpfreq = 33.333 MHz +vcofreq = 533.333 MHz +ethaddr = 00:E0:0C:BC:E5:60 +eth1addr = 00:E0:0C:BC:E5:61 +ip_addr = 192.168.1.3 +baudrate = 115200 bps +-> +-> help +? - alias for 'help' +autoscr - run script from memory +base - print or set address offset +bdinfo - print Board Info structure +boot - boot default, i.e., run 'bootcmd' +bootd - boot default, i.e., run 'bootcmd' +bootelf - Boot from an ELF image in memory +bootm - boot application image from memory +bootp - boot image via network using BootP/TFTP protocol +bootvx - Boot vxWorks from an ELF image +cmp - memory compare +coninfo - print console devices and information +cp - memory copy +crc32 - checksum calculation +date - get/set/reset date & time +dcache - enable or disable data cache +diskboot- boot from IDE device +echo - echo args to console +erase - erase FLASH memory +ext2load- load binary file from a Ext2 filesystem +ext2ls - list files in a directory (default /) +fatinfo - print information about filesystem +fatload - load binary file from a dos filesystem +fatls - list files in a directory (default /) +flinfo - print FLASH memory information +fsinfo - print information about filesystems +fsload - load binary file from a filesystem image +go - start application at address 'addr' +help - print online help +icache - enable or disable instruction cache +icrc32 - checksum calculation +ide - IDE sub-system +iloop - infinite loop on address range +imd - i2c memory display +iminfo - print header information for application image +imls - list all images found in flash +imm - i2c memory modify (auto-incrementing) +imw - memory write (fill) +inm - memory modify (constant address) +iprobe - probe to discover valid I2C chip addresses +itest - return true/false on integer compare +loadb - load binary file over serial line (kermit mode) +loads - load S-Record file over serial line +loady - load binary file over serial line (ymodem mode) +loop - infinite loop on address range +ls - list files in a directory (default /) +md - memory display +mii - MII utility commands +mm - memory modify (auto-incrementing) +mtest - simple RAM test +mw - memory write (fill) +nfs - boot image via network using NFS protocol +nm - memory modify (constant address) +pci - list and access PCI Configuration Space +ping - send ICMP ECHO_REQUEST to network host +printenv- print environment variables +protect - enable or disable FLASH write protection +rarpboot- boot image via network using RARP/TFTP protocol +reset - Perform RESET of the CPU +run - run commands in an environment variable +saveenv - save environment variables to persistent storage +setenv - set environment variables +sleep - delay execution for some time +tftpboot- boot image via network using TFTP protocol +version - print monitor version +->bootm 4000000 + +## Booting image at 04000000 ... + Image Name: Linux Kernel Image + Created: 2007-08-14 15:13:00 UTC + Image Type: M68K Linux Kernel Image (uncompressed) + Data Size: 2301952 Bytes = 2.2 MB + Load Address: 40020000 + Entry Point: 40020000 + Verifying Checksum ... OK +OK +Linux version 2.6.20-gfe5136d6-dirty (mattw@kea) (gcc version 4.2.0 20070318 (pr +erelease) (Sourcery G++ Lite 4.2-20)) #108 Mon Aug 13 13:00:13 MDT 2007 +starting up linux startmem 0xc0254000, endmem 0xcfffffff, size 253MB +Built 1 zonelists. Total pages: 32624 +Kernel command line: root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=ph +ysmap-flash.0:5M(kernel)ro,-(jffs2) +PID hash table entries: 1024 (order: 10, 4096 bytes) +Console: colour dummy device 80x25 +Dentry cache hash table entries: 32768 (order: 4, 131072 bytes) +Inode-cache hash table entries: 16384 (order: 3, 65536 bytes) +Memory: 257496k/262136k available (1864k kernel code, 2440k data, 88k init) +Mount-cache hash table entries: 1024 +NET: Registered protocol family 16 +SCSI subsystem initialized +NET: Registered protocol family 2 +IP route cache hash table entries: 2048 (order: 0, 8192 bytes) +TCP established hash table entries: 8192 (order: 2, 32768 bytes) +TCP bind hash table entries: 4096 (order: 1, 16384 bytes) +TCP: Hash tables configured (established 8192 bind 4096) +TCP reno registered +JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc. +io scheduler noop registered +io scheduler anticipatory registered +io scheduler deadline registered +io scheduler cfq registered (default) +ColdFire internal UART serial driver version 1.00 +ttyS0 at 0xfc060000 (irq = 90) is a builtin ColdFire UART +ttyS1 at 0xfc064000 (irq = 91) is a builtin ColdFire UART +ttyS2 at 0xfc068000 (irq = 92) is a builtin ColdFire UART +RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize +loop: loaded (max 8 devices) +FEC ENET Version 0.2 +fec: PHY @ 0x0, ID 0x20005ca2 -- DP83849 +eth0: ethernet 00:08:ee:00:e4:19 +physmap platform flash device: 01000000 at 04000000 +physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank + Intel/Sharp Extended Query Table at 0x0031 +Using buffer write method +cfi_cmdset_0001: Erase suspend on write enabled +2 cmdlinepart partitions found on MTD device physmap-flash.0 +Creating 2 MTD partitions on "physmap-flash.0": +0x00000000-0x00500000 : "kernel" +mtd: Giving out device 0 to kernel +0x00500000-0x01000000 : "jffs2" +mtd: Giving out device 1 to jffs2 +mice: PS/2 mouse device common for all mice +i2c /dev entries driver +TCP cubic registered +NET: Registered protocol family 1 +NET: Registered protocol family 17 +NET: Registered protocol family 15 +VFS: Mounted root (jffs2 filesystem). +Setting the hostname to freescale +Mounting filesystems +mount: Mounting usbfs on /proc/bus/usb failed: No such file or directory +Starting syslogd and klogd +Setting up networking on loopback device: +Setting up networking on eth0: +eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX. +Adding static route for default gateway to 172.27.255.254: +Setting nameserver to 172.27.0.1 in /etc/resolv.conf: +Starting inetd: +/ # diff --git a/drivers/net/mcffec.c b/drivers/net/mcffec.c index 68a0ee640d2..2e0ddeb7772 100644 --- a/drivers/net/mcffec.c +++ b/drivers/net/mcffec.c @@ -430,20 +430,33 @@ int fec_init(struct eth_device *dev, bd_t * bd) /* Set station address */ if ((u32) fecp == CFG_FEC0_IOBASE) { +#ifdef CFG_FEC1_IOBASE + volatile fec_t *fecp1 = (fec_t *) (CFG_FEC1_IOBASE); + ea = &bd->bi_enet1addr[0]; + fecp1->palr = + (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]); + fecp1->paur = (ea[4] << 24) | (ea[5] << 16); +#endif ea = &bd->bi_enetaddr[0]; + fecp->palr = + (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]); + fecp->paur = (ea[4] << 24) | (ea[5] << 16); } else { +#ifdef CFG_FEC0_IOBASE + volatile fec_t *fecp0 = (fec_t *) (CFG_FEC0_IOBASE); + ea = &bd->bi_enetaddr[0]; + fecp0->palr = + (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]); + fecp0->paur = (ea[4] << 24) | (ea[5] << 16); +#endif #ifdef CFG_FEC1_IOBASE ea = &bd->bi_enet1addr[0]; + fecp->palr = + (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]); + fecp->paur = (ea[4] << 24) | (ea[5] << 16); #endif } - fecp->palr = (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]); - fecp->paur = (ea[4] << 24) | (ea[5] << 16); -#ifdef ET_DEBUG - printf("Eth Addrs: %02x:%02x:%02x:%02x:%02x:%02x\n", - ea[0], ea[1], ea[2], ea[3], ea[4], ea[5]); -#endif - /* Clear unicast address hash table */ fecp->iaur = 0; fecp->ialr = 0; diff --git a/include/asm-m68k/global_data.h b/include/asm-m68k/global_data.h index f68352f1206..9d9894b1a2e 100644 --- a/include/asm-m68k/global_data.h +++ b/include/asm-m68k/global_data.h @@ -39,6 +39,14 @@ typedef struct global_data { unsigned long baudrate; unsigned long cpu_clk; /* CPU clock in Hz! */ unsigned long bus_clk; +#ifdef CONFIG_PCI + unsigned long pci_clk; +#endif +#ifdef CONFIG_EXTRA_CLOCK + unsigned long inp_clk; + unsigned long vco_clk; + unsigned long flb_clk; +#endif unsigned long ram_size; /* RAM size */ unsigned long reloc_off; /* Relocation Offset */ unsigned long reset_status; /* reset status register at boot */ diff --git a/include/asm-m68k/immap.h b/include/asm-m68k/immap.h index bf7b51becfa..d66c1619b16 100644 --- a/include/asm-m68k/immap.h +++ b/include/asm-m68k/immap.h @@ -170,4 +170,44 @@ #define CFG_NUM_IRQS (128) #endif /* CONFIG_M5329 */ +#ifdef CONFIG_M54455 +#include +#include + +#define CFG_FEC0_IOBASE (MMAP_FEC0) +#define CFG_FEC1_IOBASE (MMAP_FEC1) + +#define CFG_UART_BASE (MMAP_UART0 + (CFG_UART_PORT * 0x4000)) + +#define CFG_MCFRTC_BASE (MMAP_RTC) + +/* Timer */ +#ifdef CONFIG_MCFTMR +#define CFG_UDELAY_BASE (MMAP_DTMR0) +#define CFG_TMR_BASE (MMAP_DTMR1) +#define CFG_TMRPND_REG (((volatile int0_t *)(CFG_INTR_BASE))->iprh0) +#define CFG_TMRINTR_NO (INT0_HI_DTMR1) +#define CFG_TMRINTR_MASK (INTC_IPRH_INT33) +#define CFG_TMRINTR_PEND (CFG_TMRINTR_MASK) +#define CFG_TMRINTR_PRI (6) +#define CFG_TIMER_PRESCALER (((gd->bus_clk / 1000000) - 1) << 8) +#endif + +#ifdef CONFIG_MCFPIT +#define CFG_UDELAY_BASE (MMAP_PIT0) +#define CFG_PIT_BASE (MMAP_PIT1) +#define CFG_PIT_PRESCALE (6) +#endif + +#define CFG_INTR_BASE (MMAP_INTC0) +#define CFG_NUM_IRQS (128) + +#ifdef CONFIG_PCI +#define CFG_PCI_BAR0 CFG_SDRAM_BASE +#define CFG_PCI_BAR4 CFG_SDRAM_BASE +#define CFG_PCI_TBATR0 (CFG_SDRAM_BASE) +#define CFG_PCI_TBATR4 (CFG_SDRAM_BASE) +#endif +#endif /* CONFIG_M54455 */ + #endif /* __IMMAP_H */ diff --git a/include/asm-m68k/immap_5445x.h b/include/asm-m68k/immap_5445x.h new file mode 100644 index 00000000000..d091d7b73c7 --- /dev/null +++ b/include/asm-m68k/immap_5445x.h @@ -0,0 +1,937 @@ +/* + * MCF5445x Internal Memory Map + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __IMMAP_5445X__ +#define __IMMAP_5445X__ + +/* Module Base Addresses */ +#define MMAP_SCM1 0xFC000000 +#define MMAP_XBS 0xFC004000 +#define MMAP_FBCS 0xFC008000 +#define MMAP_FEC0 0xFC030000 +#define MMAP_FEC1 0xFC034000 +#define MMAP_RTC 0xFC03C000 +#define MMAP_EDMA 0xFC044000 +#define MMAP_INTC0 0xFC048000 +#define MMAP_INTC1 0xFC04C000 +#define MMAP_IACK 0xFC054000 +#define MMAP_I2C 0xFC058000 +#define MMAP_DSPI 0xFC05C000 +#define MMAP_UART0 0xFC060000 +#define MMAP_UART1 0xFC064000 +#define MMAP_UART2 0xFC068000 +#define MMAP_DTMR0 0xFC070000 +#define MMAP_DTMR1 0xFC074000 +#define MMAP_DTMR2 0xFC078000 +#define MMAP_DTMR3 0xFC07C000 +#define MMAP_PIT0 0xFC080000 +#define MMAP_PIT1 0xFC084000 +#define MMAP_PIT2 0xFC088000 +#define MMAP_PIT3 0xFC08C000 +#define MMAP_EPORT 0xFC094000 +#define MMAP_WTM 0xFC098000 +#define MMAP_SBF 0xFC0A0000 +#define MMAP_RCM 0xFC0A0000 +#define MMAP_CCM 0xFC0A0000 +#define MMAP_GPIO 0xFC0A4000 +#define MMAP_PCI 0xFC0A8000 +#define MMAP_PCIARB 0xFC0AC000 +#define MMAP_RNG 0xFC0B4000 +#define MMAP_SDRAM 0xFC0B8000 +#define MMAP_SSI 0xFC0BC000 +#define MMAP_PLL 0xFC0C4000 +#define MMAP_ATA 0x90000000 + +/********************************************************************* +* ATA +*********************************************************************/ + +typedef struct atac { + /* PIO */ + u8 toff; /* 0x00 */ + u8 ton; /* 0x01 */ + u8 t1; /* 0x02 */ + u8 t2w; /* 0x03 */ + u8 t2r; /* 0x04 */ + u8 ta; /* 0x05 */ + u8 trd; /* 0x06 */ + u8 t4; /* 0x07 */ + u8 t9; /* 0x08 */ + + /* DMA */ + u8 tm; /* 0x09 */ + u8 tn; /* 0x0A */ + u8 td; /* 0x0B */ + u8 tk; /* 0x0C */ + u8 tack; /* 0x0D */ + u8 tenv; /* 0x0E */ + u8 trp; /* 0x0F */ + u8 tzah; /* 0x10 */ + u8 tmli; /* 0x11 */ + u8 tdvh; /* 0x12 */ + u8 tdzfs; /* 0x13 */ + u8 tdvs; /* 0x14 */ + u8 tcvh; /* 0x15 */ + u8 tss; /* 0x16 */ + u8 tcyc; /* 0x17 */ + + /* FIFO */ + u32 fifo32; /* 0x18 */ + u16 fifo16; /* 0x1C */ + u8 rsvd0[2]; + u8 ffill; /* 0x20 */ + u8 rsvd1[3]; + + /* ATA */ + u8 cr; /* 0x24 */ + u8 rsvd2[3]; + u8 isr; /* 0x28 */ + u8 rsvd3[3]; + u8 ier; /* 0x2C */ + u8 rsvd4[3]; + u8 icr; /* 0x30 */ + u8 rsvd5[3]; + u8 falarm; /* 0x34 */ + u8 rsvd6[106]; +} atac_t; + +/********************************************************************* +* Cross-bar switch (XBS) +*********************************************************************/ + +typedef struct xbs { + u8 resv0[0x100]; + u32 prs1; /* XBS Priority Register */ + u8 resv1[0xC]; + u32 crs1; /* XBS Control Register */ + u8 resv2[0xEC]; + u32 prs2; /* XBS Priority Register */ + u8 resv3[0xC]; + u32 crs2; /* XBS Control Register */ + u8 resv4[0xEC]; + u32 prs3; /* XBS Priority Register */ + u8 resv5[0xC]; + u32 crs3; /* XBS Control Register */ + u8 resv6[0xEC]; + u32 prs4; /* XBS Priority Register */ + u8 resv7[0xC]; + u32 crs4; /* XBS Control Register */ + u8 resv8[0xEC]; + u32 prs5; /* XBS Priority Register */ + u8 resv9[0xC]; + u32 crs5; /* XBS Control Register */ + u8 resv10[0xEC]; + u32 prs6; /* XBS Priority Register */ + u8 resv11[0xC]; + u32 crs6; /* XBS Control Register */ + u8 resv12[0xEC]; + u32 prs7; /* XBS Priority Register */ + u8 resv13[0xC]; + u32 crs7; /* XBS Control Register */ +} xbs_t; + +/********************************************************************* +* FlexBus Chip Selects (FBCS) +*********************************************************************/ + +typedef struct fbcs { + u32 csar0; /* Chip-select Address Register */ + u32 csmr0; /* Chip-select Mask Register */ + u32 cscr0; /* Chip-select Control Register */ + u32 csar1; /* Chip-select Address Register */ + u32 csmr1; /* Chip-select Mask Register */ + u32 cscr1; /* Chip-select Control Register */ + u32 csar2; /* Chip-select Address Register */ + u32 csmr2; /* Chip-select Mask Register */ + u32 cscr2; /* Chip-select Control Register */ + u32 csar3; /* Chip-select Address Register */ + u32 csmr3; /* Chip-select Mask Register */ + u32 cscr3; /* Chip-select Control Register */ +} fbcs_t; + +/********************************************************************* +* Enhanced DMA (EDMA) +*********************************************************************/ + +typedef struct edma { + u32 cr; + u32 es; + u8 resv0[0x6]; + u16 erq; + u8 resv1[0x6]; + u16 eei; + u8 serq; + u8 cerq; + u8 seei; + u8 ceei; + u8 cint; + u8 cerr; + u8 ssrt; + u8 cdne; + u8 resv2[0x6]; + u16 intr; + u8 resv3[0x6]; + u16 err; + u8 resv4[0xD0]; + u8 dchpri0; + u8 dchpri1; + u8 dchpri2; + u8 dchpri3; + u8 dchpri4; + u8 dchpri5; + u8 dchpri6; + u8 dchpri7; + u8 dchpri8; + u8 dchpri9; + u8 dchpri10; + u8 dchpri11; + u8 dchpri12; + u8 dchpri13; + u8 dchpri14; + u8 dchpri15; + u8 resv5[0xEF0]; + u32 tcd0_saddr; + u16 tcd0_attr; + u16 tcd0_soff; + u32 tcd0_nbytes; + u32 tcd0_slast; + u32 tcd0_daddr; + union { + u16 tcd0_citer_elink; + u16 tcd0_citer; + }; + u16 tcd0_doff; + u32 tcd0_dlast_sga; + union { + u16 tcd0_biter_elink; + u16 tcd0_biter; + }; + u16 tcd0_csr; + u32 tcd1_saddr; + u16 tcd1_attr; + u16 tcd1_soff; + u32 tcd1_nbytes; + u32 tcd1_slast; + u32 tcd1_daddr; + union { + u16 tcd1_citer_elink; + u16 tcd1_citer; + }; + u16 tcd1_doff; + u32 tcd1_dlast_sga; + union { + u16 tcd1_biter; + u16 tcd1_biter_elink; + }; + u16 tcd1_csr; + u32 tcd2_saddr; + u16 tcd2_attr; + u16 tcd2_soff; + u32 tcd2_nbytes; + u32 tcd2_slast; + u32 tcd2_daddr; + union { + u16 tcd2_citer; + u16 tcd2_citer_elink; + }; + u16 tcd2_doff; + u32 tcd2_dlast_sga; + union { + u16 tcd2_biter_elink; + u16 tcd2_biter; + }; + u16 tcd2_csr; + u32 tcd3_saddr; + u16 tcd3_attr; + u16 tcd3_soff; + u32 tcd3_nbytes; + u32 tcd3_slast; + u32 tcd3_daddr; + union { + u16 tcd3_citer; + u16 tcd3_citer_elink; + }; + u16 tcd3_doff; + u32 tcd3_dlast_sga; + union { + u16 tcd3_biter_elink; + u16 tcd3_biter; + }; + u16 tcd3_csr; + u32 tcd4_saddr; + u16 tcd4_attr; + u16 tcd4_soff; + u32 tcd4_nbytes; + u32 tcd4_slast; + u32 tcd4_daddr; + union { + u16 tcd4_citer; + u16 tcd4_citer_elink; + }; + u16 tcd4_doff; + u32 tcd4_dlast_sga; + union { + u16 tcd4_biter; + u16 tcd4_biter_elink; + }; + u16 tcd4_csr; + u32 tcd5_saddr; + u16 tcd5_attr; + u16 tcd5_soff; + u32 tcd5_nbytes; + u32 tcd5_slast; + u32 tcd5_daddr; + union { + u16 tcd5_citer; + u16 tcd5_citer_elink; + }; + u16 tcd5_doff; + u32 tcd5_dlast_sga; + union { + u16 tcd5_biter_elink; + u16 tcd5_biter; + }; + u16 tcd5_csr; + u32 tcd6_saddr; + u16 tcd6_attr; + u16 tcd6_soff; + u32 tcd6_nbytes; + u32 tcd6_slast; + u32 tcd6_daddr; + union { + u16 tcd6_citer; + u16 tcd6_citer_elink; + }; + u16 tcd6_doff; + u32 tcd6_dlast_sga; + union { + u16 tcd6_biter_elink; + u16 tcd6_biter; + }; + u16 tcd6_csr; + u32 tcd7_saddr; + u16 tcd7_attr; + u16 tcd7_soff; + u32 tcd7_nbytes; + u32 tcd7_slast; + u32 tcd7_daddr; + union { + u16 tcd7_citer; + u16 tcd7_citer_elink; + }; + u16 tcd7_doff; + u32 tcd7_dlast_sga; + union { + u16 tcd7_biter_elink; + u16 tcd7_biter; + }; + u16 tcd7_csr; + u32 tcd8_saddr; + u16 tcd8_attr; + u16 tcd8_soff; + u32 tcd8_nbytes; + u32 tcd8_slast; + u32 tcd8_daddr; + union { + u16 tcd8_citer; + u16 tcd8_citer_elink; + }; + u16 tcd8_doff; + u32 tcd8_dlast_sga; + union { + u16 tcd8_biter_elink; + u16 tcd8_biter; + }; + u16 tcd8_csr; + u32 tcd9_saddr; + u16 tcd9_attr; + u16 tcd9_soff; + u32 tcd9_nbytes; + u32 tcd9_slast; + u32 tcd9_daddr; + union { + u16 tcd9_citer_elink; + u16 tcd9_citer; + }; + u16 tcd9_doff; + u32 tcd9_dlast_sga; + union { + u16 tcd9_biter_elink; + u16 tcd9_biter; + }; + u16 tcd9_csr; + u32 tcd10_saddr; + u16 tcd10_attr; + u16 tcd10_soff; + u32 tcd10_nbytes; + u32 tcd10_slast; + u32 tcd10_daddr; + union { + u16 tcd10_citer_elink; + u16 tcd10_citer; + }; + u16 tcd10_doff; + u32 tcd10_dlast_sga; + union { + u16 tcd10_biter; + u16 tcd10_biter_elink; + }; + u16 tcd10_csr; + u32 tcd11_saddr; + u16 tcd11_attr; + u16 tcd11_soff; + u32 tcd11_nbytes; + u32 tcd11_slast; + u32 tcd11_daddr; + union { + u16 tcd11_citer; + u16 tcd11_citer_elink; + }; + u16 tcd11_doff; + u32 tcd11_dlast_sga; + union { + u16 tcd11_biter; + u16 tcd11_biter_elink; + }; + u16 tcd11_csr; + u32 tcd12_saddr; + u16 tcd12_attr; + u16 tcd12_soff; + u32 tcd12_nbytes; + u32 tcd12_slast; + u32 tcd12_daddr; + union { + u16 tcd12_citer; + u16 tcd12_citer_elink; + }; + u16 tcd12_doff; + u32 tcd12_dlast_sga; + union { + u16 tcd12_biter; + u16 tcd12_biter_elink; + }; + u16 tcd12_csr; + u32 tcd13_saddr; + u16 tcd13_attr; + u16 tcd13_soff; + u32 tcd13_nbytes; + u32 tcd13_slast; + u32 tcd13_daddr; + union { + u16 tcd13_citer_elink; + u16 tcd13_citer; + }; + u16 tcd13_doff; + u32 tcd13_dlast_sga; + union { + u16 tcd13_biter_elink; + u16 tcd13_biter; + }; + u16 tcd13_csr; + u32 tcd14_saddr; + u16 tcd14_attr; + u16 tcd14_soff; + u32 tcd14_nbytes; + u32 tcd14_slast; + u32 tcd14_daddr; + union { + u16 tcd14_citer; + u16 tcd14_citer_elink; + }; + u16 tcd14_doff; + u32 tcd14_dlast_sga; + union { + u16 tcd14_biter_elink; + u16 tcd14_biter; + }; + u16 tcd14_csr; + u32 tcd15_saddr; + u16 tcd15_attr; + u16 tcd15_soff; + u32 tcd15_nbytes; + u32 tcd15_slast; + u32 tcd15_daddr; + union { + u16 tcd15_citer_elink; + u16 tcd15_citer; + }; + u16 tcd15_doff; + u32 tcd15_dlast_sga; + union { + u16 tcd15_biter; + u16 tcd15_biter_elink; + }; + u16 tcd15_csr; +} edma_t; + +/********************************************************************* +* Interrupt Controller (INTC) +*********************************************************************/ + +typedef struct int0_ctrl { + u32 iprh0; /* 0x00 Pending Register High */ + u32 iprl0; /* 0x04 Pending Register Low */ + u32 imrh0; /* 0x08 Mask Register High */ + u32 imrl0; /* 0x0C Mask Register Low */ + u32 frch0; /* 0x10 Force Register High */ + u32 frcl0; /* 0x14 Force Register Low */ + u16 res1; /* 0x18 - 0x19 */ + u16 icfg0; /* 0x1A Configuration Register */ + u8 simr0; /* 0x1C Set Interrupt Mask */ + u8 cimr0; /* 0x1D Clear Interrupt Mask */ + u8 clmask0; /* 0x1E Current Level Mask */ + u8 slmask; /* 0x1F Saved Level Mask */ + u32 res2[8]; /* 0x20 - 0x3F */ + u8 icr0[64]; /* 0x40 - 0x7F Control registers */ + u32 res3[24]; /* 0x80 - 0xDF */ + u8 swiack0; /* 0xE0 Software Interrupt Acknowledge */ + u8 res4[3]; /* 0xE1 - 0xE3 */ + u8 Lniack0_1; /* 0xE4 Level n interrupt acknowledge resister */ + u8 res5[3]; /* 0xE5 - 0xE7 */ + u8 Lniack0_2; /* 0xE8 Level n interrupt acknowledge resister */ + u8 res6[3]; /* 0xE9 - 0xEB */ + u8 Lniack0_3; /* 0xEC Level n interrupt acknowledge resister */ + u8 res7[3]; /* 0xED - 0xEF */ + u8 Lniack0_4; /* 0xF0 Level n interrupt acknowledge resister */ + u8 res8[3]; /* 0xF1 - 0xF3 */ + u8 Lniack0_5; /* 0xF4 Level n interrupt acknowledge resister */ + u8 res9[3]; /* 0xF5 - 0xF7 */ + u8 Lniack0_6; /* 0xF8 Level n interrupt acknowledge resister */ + u8 resa[3]; /* 0xF9 - 0xFB */ + u8 Lniack0_7; /* 0xFC Level n interrupt acknowledge resister */ + u8 resb[3]; /* 0xFD - 0xFF */ +} int0_t; + +typedef struct int1_ctrl { + /* Interrupt Controller 1 */ + u32 iprh1; /* 0x00 Pending Register High */ + u32 iprl1; /* 0x04 Pending Register Low */ + u32 imrh1; /* 0x08 Mask Register High */ + u32 imrl1; /* 0x0C Mask Register Low */ + u32 frch1; /* 0x10 Force Register High */ + u32 frcl1; /* 0x14 Force Register Low */ + u16 res1; /* 0x18 */ + u16 icfg1; /* 0x1A Configuration Register */ + u8 simr1; /* 0x1C Set Interrupt Mask */ + u8 cimr1; /* 0x1D Clear Interrupt Mask */ + u16 res2; /* 0x1E - 0x1F */ + u32 res3[8]; /* 0x20 - 0x3F */ + u8 icr1[64]; /* 0x40 - 0x7F */ + u32 res4[24]; /* 0x80 - 0xDF */ + u8 swiack1; /* 0xE0 Software Interrupt Acknowledge */ + u8 res5[3]; /* 0xE1 - 0xE3 */ + u8 Lniack1_1; /* 0xE4 Level n interrupt acknowledge resister */ + u8 res6[3]; /* 0xE5 - 0xE7 */ + u8 Lniack1_2; /* 0xE8 Level n interrupt acknowledge resister */ + u8 res7[3]; /* 0xE9 - 0xEB */ + u8 Lniack1_3; /* 0xEC Level n interrupt acknowledge resister */ + u8 res8[3]; /* 0xED - 0xEF */ + u8 Lniack1_4; /* 0xF0 Level n interrupt acknowledge resister */ + u8 res9[3]; /* 0xF1 - 0xF3 */ + u8 Lniack1_5; /* 0xF4 Level n interrupt acknowledge resister */ + u8 resa[3]; /* 0xF5 - 0xF7 */ + u8 Lniack1_6; /* 0xF8 Level n interrupt acknowledge resister */ + u8 resb[3]; /* 0xF9 - 0xFB */ + u8 Lniack1_7; /* 0xFC Level n interrupt acknowledge resister */ + u8 resc[3]; /* 0xFD - 0xFF */ +} int1_t; + +/********************************************************************* +* Global Interrupt Acknowledge (IACK) +*********************************************************************/ + +typedef struct iack { + u8 resv0[0xE0]; + u8 gswiack; + u8 resv1[0x3]; + u8 gl1iack; + u8 resv2[0x3]; + u8 gl2iack; + u8 resv3[0x3]; + u8 gl3iack; + u8 resv4[0x3]; + u8 gl4iack; + u8 resv5[0x3]; + u8 gl5iack; + u8 resv6[0x3]; + u8 gl6iack; + u8 resv7[0x3]; + u8 gl7iack; +} iack_t; + +/********************************************************************* +* DMA Serial Peripheral Interface (DSPI) +*********************************************************************/ + +typedef struct dspi { + u32 dmcr; + u8 resv0[0x4]; + u32 dtcr; + u32 dctar0; + u32 dctar1; + u32 dctar2; + u32 dctar3; + u32 dctar4; + u32 dctar5; + u32 dctar6; + u32 dctar7; + u32 dsr; + u32 dirsr; + u32 dtfr; + u32 drfr; + u32 dtfdr0; + u32 dtfdr1; + u32 dtfdr2; + u32 dtfdr3; + u8 resv1[0x30]; + u32 drfdr0; + u32 drfdr1; + u32 drfdr2; + u32 drfdr3; +} dspi_t; + +/********************************************************************* +* Edge Port Module (EPORT) +*********************************************************************/ + +typedef struct eport { + u16 eppar; + u8 epddr; + u8 epier; + u8 epdr; + u8 eppdr; + u8 epfr; +} eport_t; + +/********************************************************************* +* Watchdog Timer Modules (WTM) +*********************************************************************/ + +typedef struct wtm { + u16 wcr; + u16 wmr; + u16 wcntr; + u16 wsr; +} wtm_t; + +/********************************************************************* +* Serial Boot Facility (SBF) +*********************************************************************/ + +typedef struct sbf { + u8 resv0[0x18]; + u16 sbfsr; /* Serial Boot Facility Status Register */ + u8 resv1[0x6]; + u16 sbfcr; /* Serial Boot Facility Control Register */ +} sbf_t; + +/********************************************************************* +* Reset Controller Module (RCM) +*********************************************************************/ + +typedef struct rcm { + u8 rcr; + u8 rsr; +} rcm_t; + +/********************************************************************* +* Chip Configuration Module (CCM) +*********************************************************************/ + +typedef struct ccm { + u8 ccm_resv0[0x4]; + u16 ccr; /* Chip Configuration Register (256 TEPBGA, Read-only) */ + u8 resv1[0x2]; + u16 rcon; /* Reset Configuration (256 TEPBGA, Read-only) */ + u16 cir; /* Chip Identification Register (Read-only) */ + u8 resv2[0x4]; + u16 misccr; /* Miscellaneous Control Register */ + u16 cdr; /* Clock Divider Register */ + u16 uocsr; /* USB On-the-Go Controller Status Register */ +} ccm_t; + +/********************************************************************* +* General Purpose I/O Module (GPIO) +*********************************************************************/ + +typedef struct gpio { + u8 podr_fec0h; /* FEC0 High Port Output Data Register */ + u8 podr_fec0l; /* FEC0 Low Port Output Data Register */ + u8 podr_ssi; /* SSI Port Output Data Register */ + u8 podr_fbctl; /* Flexbus Control Port Output Data Register */ + u8 podr_be; /* Flexbus Byte Enable Port Output Data Register */ + u8 podr_cs; /* Flexbus Chip-Select Port Output Data Register */ + u8 podr_dma; /* DMA Port Output Data Register */ + u8 podr_feci2c; /* FEC1 / I2C Port Output Data Register */ + u8 resv0[0x1]; + u8 podr_uart; /* UART Port Output Data Register */ + u8 podr_dspi; /* DSPI Port Output Data Register */ + u8 podr_timer; /* Timer Port Output Data Register */ + u8 podr_pci; /* PCI Port Output Data Register */ + u8 podr_usb; /* USB Port Output Data Register */ + u8 podr_atah; /* ATA High Port Output Data Register */ + u8 podr_atal; /* ATA Low Port Output Data Register */ + u8 podr_fec1h; /* FEC1 High Port Output Data Register */ + u8 podr_fec1l; /* FEC1 Low Port Output Data Register */ + u8 resv1[0x2]; + u8 podr_fbadh; /* Flexbus AD High Port Output Data Register */ + u8 podr_fbadmh; /* Flexbus AD Med-High Port Output Data Register */ + u8 podr_fbadml; /* Flexbus AD Med-Low Port Output Data Register */ + u8 podr_fbadl; /* Flexbus AD Low Port Output Data Register */ + u8 pddr_fec0h; /* FEC0 High Port Data Direction Register */ + u8 pddr_fec0l; /* FEC0 Low Port Data Direction Register */ + u8 pddr_ssi; /* SSI Port Data Direction Register */ + u8 pddr_fbctl; /* Flexbus Control Port Data Direction Register */ + u8 pddr_be; /* Flexbus Byte Enable Port Data Direction Register */ + u8 pddr_cs; /* Flexbus Chip-Select Port Data Direction Register */ + u8 pddr_dma; /* DMA Port Data Direction Register */ + u8 pddr_feci2c; /* FEC1 / I2C Port Data Direction Register */ + u8 resv2[0x1]; + u8 pddr_uart; /* UART Port Data Direction Register */ + u8 pddr_dspi; /* DSPI Port Data Direction Register */ + u8 pddr_timer; /* Timer Port Data Direction Register */ + u8 pddr_pci; /* PCI Port Data Direction Register */ + u8 pddr_usb; /* USB Port Data Direction Register */ + u8 pddr_atah; /* ATA High Port Data Direction Register */ + u8 pddr_atal; /* ATA Low Port Data Direction Register */ + u8 pddr_fec1h; /* FEC1 High Port Data Direction Register */ + u8 pddr_fec1l; /* FEC1 Low Port Data Direction Register */ + u8 resv3[0x2]; + u8 pddr_fbadh; /* Flexbus AD High Port Data Direction Register */ + u8 pddr_fbadmh; /* Flexbus AD Med-High Port Data Direction Register */ + u8 pddr_fbadml; /* Flexbus AD Med-Low Port Data Direction Register */ + u8 pddr_fbadl; /* Flexbus AD Low Port Data Direction Register */ + u8 ppdsdr_fec0h; /* FEC0 High Port Pin Data/Set Data Register */ + u8 ppdsdr_fec0l; /* FEC0 Low Port Clear Output Data Register */ + u8 ppdsdr_ssi; /* SSI Port Pin Data/Set Data Register */ + u8 ppdsdr_fbctl; /* Flexbus Control Port Pin Data/Set Data Register */ + u8 ppdsdr_be; /* Flexbus Byte Enable Port Pin Data/Set Data Register */ + u8 ppdsdr_cs; /* Flexbus Chip-Select Port Pin Data/Set Data Register */ + u8 ppdsdr_dma; /* DMA Port Pin Data/Set Data Register */ + u8 ppdsdr_feci2c; /* FEC1 / I2C Port Pin Data/Set Data Register */ + u8 resv4[0x1]; + u8 ppdsdr_uart; /* UART Port Pin Data/Set Data Register */ + u8 ppdsdr_dspi; /* DSPI Port Pin Data/Set Data Register */ + u8 ppdsdr_timer; /* FTimer Port Pin Data/Set Data Register */ + u8 ppdsdr_pci; /* PCI Port Pin Data/Set Data Register */ + u8 ppdsdr_usb; /* USB Port Pin Data/Set Data Register */ + u8 ppdsdr_atah; /* ATA High Port Pin Data/Set Data Register */ + u8 ppdsdr_atal; /* ATA Low Port Pin Data/Set Data Register */ + u8 ppdsdr_fec1h; /* FEC1 High Port Pin Data/Set Data Register */ + u8 ppdsdr_fec1l; /* FEC1 Low Port Pin Data/Set Data Register */ + u8 resv5[0x2]; + u8 ppdsdr_fbadh; /* Flexbus AD High Port Pin Data/Set Data Register */ + u8 ppdsdr_fbadmh; /* Flexbus AD Med-High Port Pin Data/Set Data Register */ + u8 ppdsdr_fbadml; /* Flexbus AD Med-Low Port Pin Data/Set Data Register */ + u8 ppdsdr_fbadl; /* Flexbus AD Low Port Pin Data/Set Data Register */ + u8 pclrr_fec0h; /* FEC0 High Port Clear Output Data Register */ + u8 pclrr_fec0l; /* FEC0 Low Port Pin Data/Set Data Register */ + u8 pclrr_ssi; /* SSI Port Clear Output Data Register */ + u8 pclrr_fbctl; /* Flexbus Control Port Clear Output Data Register */ + u8 pclrr_be; /* Flexbus Byte Enable Port Clear Output Data Register */ + u8 pclrr_cs; /* Flexbus Chip-Select Port Clear Output Data Register */ + u8 pclrr_dma; /* DMA Port Clear Output Data Register */ + u8 pclrr_feci2c; /* FEC1 / I2C Port Clear Output Data Register */ + u8 resv6[0x1]; + u8 pclrr_uart; /* UART Port Clear Output Data Register */ + u8 pclrr_dspi; /* DSPI Port Clear Output Data Register */ + u8 pclrr_timer; /* Timer Port Clear Output Data Register */ + u8 pclrr_pci; /* PCI Port Clear Output Data Register */ + u8 pclrr_usb; /* USB Port Clear Output Data Register */ + u8 pclrr_atah; /* ATA High Port Clear Output Data Register */ + u8 pclrr_atal; /* ATA Low Port Clear Output Data Register */ + u8 pclrr_fec1h; /* FEC1 High Port Clear Output Data Register */ + u8 pclrr_fec1l; /* FEC1 Low Port Clear Output Data Register */ + u8 resv7[0x2]; + u8 pclrr_fbadh; /* Flexbus AD High Port Clear Output Data Register */ + u8 pclrr_fbadmh; /* Flexbus AD Med-High Port Clear Output Data Register */ + u8 pclrr_fbadml; /* Flexbus AD Med-Low Port Clear Output Data Register */ + u8 pclrr_fbadl; /* Flexbus AD Low Port Clear Output Data Register */ + u8 par_fec; /* FEC Pin Assignment Register */ + u8 par_dma; /* DMA Pin Assignment Register */ + u8 par_fbctl; /* Flexbus Control Pin Assignment Register */ + u8 par_dspi; /* DSPI Pin Assignment Register */ + u8 par_be; /* Flexbus Byte-Enable Pin Assignment Register */ + u8 par_cs; /* Flexbus Chip-Select Pin Assignment Register */ + u8 par_timer; /* Time Pin Assignment Register */ + u8 par_usb; /* USB Pin Assignment Register */ + u8 resv8[0x1]; + u8 par_uart; /* UART Pin Assignment Register */ + u16 par_feci2c; /* FEC / I2C Pin Assignment Register */ + u16 par_ssi; /* SSI Pin Assignment Register */ + u16 par_ata; /* ATA Pin Assignment Register */ + u8 par_irq; /* IRQ Pin Assignment Register */ + u8 resv9[0x1]; + u16 par_pci; /* PCI Pin Assignment Register */ + u8 mscr_sdram; /* SDRAM Mode Select Control Register */ + u8 mscr_pci; /* PCI Mode Select Control Register */ + u8 resv10[0x2]; + u8 dscr_i2c; /* I2C Drive Strength Control Register */ + u8 dscr_flexbus; /* FLEXBUS Drive Strength Control Register */ + u8 dscr_fec; /* FEC Drive Strength Control Register */ + u8 dscr_uart; /* UART Drive Strength Control Register */ + u8 dscr_dspi; /* DSPI Drive Strength Control Register */ + u8 dscr_timer; /* TIMER Drive Strength Control Register */ + u8 dscr_ssi; /* SSI Drive Strength Control Register */ + u8 dscr_dma; /* DMA Drive Strength Control Register */ + u8 dscr_debug; /* DEBUG Drive Strength Control Register */ + u8 dscr_reset; /* RESET Drive Strength Control Register */ + u8 dscr_irq; /* IRQ Drive Strength Control Register */ + u8 dscr_usb; /* USB Drive Strength Control Register */ + u8 dscr_ata; /* ATA Drive Strength Control Register */ +} gpio_t; + +/********************************************************************* +* Random Number Generator (RNG) +*********************************************************************/ + +typedef struct rng { + u32 rngcr; + u32 rngsr; + u32 rnger; + u32 rngout; +} rng_t; + +/********************************************************************* +* SDRAM Controller (SDRAMC) +*********************************************************************/ + +typedef struct sdramc { + u32 sdmr; /* SDRAM Mode/Extended Mode Register */ + u32 sdcr; /* SDRAM Control Register */ + u32 sdcfg1; /* SDRAM Configuration Register 1 */ + u32 sdcfg2; /* SDRAM Chip Select Register */ + u8 resv0[0x100]; + u32 sdcs0; /* SDRAM Mode/Extended Mode Register */ + u32 sdcs1; /* SDRAM Mode/Extended Mode Register */ +} sdramc_t; + +/********************************************************************* +* Synchronous Serial Interface (SSI) +*********************************************************************/ + +typedef struct ssi { + u32 tx0; + u32 tx1; + u32 rx0; + u32 rx1; + u32 cr; + u32 isr; + u32 ier; + u32 tcr; + u32 rcr; + u32 ccr; + u8 resv0[0x4]; + u32 fcsr; + u8 resv1[0x8]; + u32 acr; + u32 acadd; + u32 acdat; + u32 atag; + u32 tmask; + u32 rmask; +} ssi_t; + +/********************************************************************* +* Phase Locked Loop (PLL) +*********************************************************************/ + +typedef struct pll { + u32 pcr; /* PLL Control Register */ + u32 psr; /* PLL Status Register */ +} pll_t; + +typedef struct pci { + u32 idr; /* 0x00 Device Id / Vendor Id Register */ + u32 scr; /* 0x04 Status / command Register */ + u32 ccrir; /* 0x08 Class Code / Revision Id Register */ + u32 cr1; /* 0x0c Configuration 1 Register */ + u32 bar0; /* 0x10 Base address register 0 Register */ + u32 bar1; /* 0x14 Base address register 1 Register */ + u32 bar2; /* 0x18 Base address register 2 Register */ + u32 bar3; /* 0x1c Base address register 3 Register */ + u32 bar4; /* 0x20 Base address register 4 Register */ + u32 bar5; /* 0x24 Base address register 5 Register */ + u32 ccpr; /* 0x28 Cardbus CIS Pointer Register */ + u32 sid; /* 0x2c Subsystem ID / Subsystem Vendor ID Register */ + u32 erbar; /* 0x30 Expansion ROM Base Address Register */ + u32 cpr; /* 0x34 Capabilities Pointer Register */ + u32 rsvd1; /* 0x38 */ + u32 cr2; /* 0x3c Configuration Register 2 */ + u32 rsvd2[8]; /* 0x40 - 0x5f */ + + /* General control / status registers */ + u32 gscr; /* 0x60 Global Status / Control Register */ + u32 tbatr0a; /* 0x64 Target Base Address Translation Register 0 */ + u32 tbatr1a; /* 0x68 Target Base Address Translation Register 1 */ + u32 tcr1; /* 0x6c Target Control 1 Register */ + u32 iw0btar; /* 0x70 Initiator Window 0 Base/Translation addr */ + u32 iw1btar; /* 0x74 Initiator Window 1 Base/Translation addr */ + u32 iw2btar; /* 0x78 Initiator Window 2 Base/Translation addr */ + u32 rsvd3; /* 0x7c */ + u32 iwcr; /* 0x80 Initiator Window Configuration Register */ + u32 icr; /* 0x84 Initiator Control Register */ + u32 isr; /* 0x88 Initiator Status Register */ + u32 tcr2; /* 0x8c Target Control 2 Register */ + u32 tbatr0; /* 0x90 Target Base Address Translation Register 0 */ + u32 tbatr1; /* 0x94 Target Base Address Translation Register 1 */ + u32 tbatr2; /* 0x98 Target Base Address Translation Register 2 */ + u32 tbatr3; /* 0x9c Target Base Address Translation Register 3 */ + u32 tbatr4; /* 0xa0 Target Base Address Translation Register 4 */ + u32 tbatr5; /* 0xa4 Target Base Address Translation Register 5 */ + u32 intr; /* 0xa8 Interrupt Register */ + u32 rsvd4[19]; /* 0xac - 0xf7 */ + u32 car; /* 0xf8 Configuration Address Register */ +} pci_t; + +typedef struct pci_arbiter { + /* Pci Arbiter Registers */ + union { + u32 acr; /* Arbiter Control Register */ + u32 asr; /* Arbiter Status Register */ + }; +} pciarb_t; + +/* Register read/write struct */ +typedef struct scm1 { + u32 mpr; /* 0x00 Master Privilege Register */ + u32 rsvd1[7]; + u32 pacra; /* 0x20 Peripheral Access Control Register A */ + u32 pacrb; /* 0x24 Peripheral Access Control Register B */ + u32 pacrc; /* 0x28 Peripheral Access Control Register C */ + u32 pacrd; /* 0x2C Peripheral Access Control Register D */ + u32 rsvd2[4]; + u32 pacre; /* 0x40 Peripheral Access Control Register E */ + u32 pacrf; /* 0x44 Peripheral Access Control Register F */ + u32 pacrg; /* 0x48 Peripheral Access Control Register G */ +} scm1_t; +/********************************************************************/ + +typedef struct rtcex { + u32 rsvd1[3]; + u32 gocu; + u32 gocl; +} rtcex_t; +#endif /* __IMMAP_5445X__ */ diff --git a/include/asm-m68k/m5445x.h b/include/asm-m68k/m5445x.h new file mode 100644 index 00000000000..8b886b0b605 --- /dev/null +++ b/include/asm-m68k/m5445x.h @@ -0,0 +1,1541 @@ +/* + * MCF5445x Internal Memory Map + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __MCF5445X__ +#define __MCF5445X__ + +/********************************************************************* +* Cross-bar switch (XBS) +*********************************************************************/ + +/* Bit definitions and macros for PRS group */ +#define XBS_PRS_M0(x) (((x)&0x00000007)) /* Core */ +#define XBS_PRS_M1(x) (((x)&0x00000007)<<4) /* eDMA */ +#define XBS_PRS_M2(x) (((x)&0x00000007)<<8) /* FEC0 */ +#define XBS_PRS_M3(x) (((x)&0x00000007)<<12) /* FEC1 */ +#define XBS_PRS_M5(x) (((x)&0x00000007)<<20) /* PCI controller */ +#define XBS_PRS_M6(x) (((x)&0x00000007)<<24) /* USB OTG */ +#define XBS_PRS_M7(x) (((x)&0x00000007)<<28) /* Serial Boot */ + +/* Bit definitions and macros for CRS group */ +#define XBS_CRS_PARK(x) (((x)&0x00000007)) /* Master parking ctrl */ +#define XBS_CRS_PCTL(x) (((x)&0x00000003)<<4) /* Parking mode ctrl */ +#define XBS_CRS_ARB (0x00000100) /* Arbitration Mode */ +#define XBS_CRS_RO (0x80000000) /* Read Only */ + +#define XBS_CRS_PCTL_PARK_FIELD (0) +#define XBS_CRS_PCTL_PARK_ON_LAST (1) +#define XBS_CRS_PCTL_PARK_NONE (2) +#define XBS_CRS_PCTL_PARK_CORE (0) +#define XBS_CRS_PCTL_PARK_EDMA (1) +#define XBS_CRS_PCTL_PARK_FEC0 (2) +#define XBS_CRS_PCTL_PARK_FEC1 (3) +#define XBS_CRS_PCTL_PARK_PCI (5) +#define XBS_CRS_PCTL_PARK_USB (6) +#define XBS_CRS_PCTL_PARK_SBF (7) + +/********************************************************************* +* FlexBus Chip Selects (FBCS) +*********************************************************************/ + +/* Bit definitions and macros for CSAR group */ +#define FBCS_CSAR_BA(x) ((x)&0xFFFF0000) + +/* Bit definitions and macros for CSMR group */ +#define FBCS_CSMR_V (0x00000001) /* Valid bit */ +#define FBCS_CSMR_WP (0x00000100) /* Write protect */ +#define FBCS_CSMR_BAM(x) (((x)&0x0000FFFF)<<16) /* Base address mask */ +#define FBCS_CSMR_BAM_4G (0xFFFF0000) +#define FBCS_CSMR_BAM_2G (0x7FFF0000) +#define FBCS_CSMR_BAM_1G (0x3FFF0000) +#define FBCS_CSMR_BAM_1024M (0x3FFF0000) +#define FBCS_CSMR_BAM_512M (0x1FFF0000) +#define FBCS_CSMR_BAM_256M (0x0FFF0000) +#define FBCS_CSMR_BAM_128M (0x07FF0000) +#define FBCS_CSMR_BAM_64M (0x03FF0000) +#define FBCS_CSMR_BAM_32M (0x01FF0000) +#define FBCS_CSMR_BAM_16M (0x00FF0000) +#define FBCS_CSMR_BAM_8M (0x007F0000) +#define FBCS_CSMR_BAM_4M (0x003F0000) +#define FBCS_CSMR_BAM_2M (0x001F0000) +#define FBCS_CSMR_BAM_1M (0x000F0000) +#define FBCS_CSMR_BAM_1024K (0x000F0000) +#define FBCS_CSMR_BAM_512K (0x00070000) +#define FBCS_CSMR_BAM_256K (0x00030000) +#define FBCS_CSMR_BAM_128K (0x00010000) +#define FBCS_CSMR_BAM_64K (0x00000000) + +/* Bit definitions and macros for CSCR group */ +#define FBCS_CSCR_BSTW (0x00000008) /* Burst-write enable */ +#define FBCS_CSCR_BSTR (0x00000010) /* Burst-read enable */ +#define FBCS_CSCR_BEM (0x00000020) /* Byte-enable mode */ +#define FBCS_CSCR_PS(x) (((x)&0x00000003)<<6) /* Port size */ +#define FBCS_CSCR_AA (0x00000100) /* Auto-acknowledge */ +#define FBCS_CSCR_WS(x) (((x)&0x0000003F)<<10) /* Wait states */ +#define FBCS_CSCR_WRAH(x) (((x)&0x00000003)<<16) /* Write address hold or deselect */ +#define FBCS_CSCR_RDAH(x) (((x)&0x00000003)<<18) /* Read address hold or deselect */ +#define FBCS_CSCR_ASET(x) (((x)&0x00000003)<<20) /* Address setup */ +#define FBCS_CSCR_SWSEN (0x00800000) /* Secondary wait state enable */ +#define FBCS_CSCR_SWS(x) (((x)&0x0000003F)<<26) /* Secondary wait states */ + +#define FBCS_CSCR_PS_8 (0x00000040) +#define FBCS_CSCR_PS_16 (0x00000080) +#define FBCS_CSCR_PS_32 (0x00000000) + +/********************************************************************* +* Interrupt Controller (INTC) +*********************************************************************/ +#define INT0_LO_RSVD0 (0) +#define INT0_LO_EPORT1 (1) +#define INT0_LO_EPORT2 (2) +#define INT0_LO_EPORT3 (3) +#define INT0_LO_EPORT4 (4) +#define INT0_LO_EPORT5 (5) +#define INT0_LO_EPORT6 (6) +#define INT0_LO_EPORT7 (7) +#define INT0_LO_EDMA_00 (8) +#define INT0_LO_EDMA_01 (9) +#define INT0_LO_EDMA_02 (10) +#define INT0_LO_EDMA_03 (11) +#define INT0_LO_EDMA_04 (12) +#define INT0_LO_EDMA_05 (13) +#define INT0_LO_EDMA_06 (14) +#define INT0_LO_EDMA_07 (15) +#define INT0_LO_EDMA_08 (16) +#define INT0_LO_EDMA_09 (17) +#define INT0_LO_EDMA_10 (18) +#define INT0_LO_EDMA_11 (19) +#define INT0_LO_EDMA_12 (20) +#define INT0_LO_EDMA_13 (21) +#define INT0_LO_EDMA_14 (22) +#define INT0_LO_EDMA_15 (23) +#define INT0_LO_EDMA_ERR (24) +#define INT0_LO_SCM (25) +#define INT0_LO_UART0 (26) +#define INT0_LO_UART1 (27) +#define INT0_LO_UART2 (28) +#define INT0_LO_RSVD1 (29) +#define INT0_LO_I2C (30) +#define INT0_LO_QSPI (31) +#define INT0_HI_DTMR0 (32) +#define INT0_HI_DTMR1 (33) +#define INT0_HI_DTMR2 (34) +#define INT0_HI_DTMR3 (35) +#define INT0_HI_FEC0_TXF (36) +#define INT0_HI_FEC0_TXB (37) +#define INT0_HI_FEC0_UN (38) +#define INT0_HI_FEC0_RL (39) +#define INT0_HI_FEC0_RXF (40) +#define INT0_HI_FEC0_RXB (41) +#define INT0_HI_FEC0_MII (42) +#define INT0_HI_FEC0_LC (43) +#define INT0_HI_FEC0_HBERR (44) +#define INT0_HI_FEC0_GRA (45) +#define INT0_HI_FEC0_EBERR (46) +#define INT0_HI_FEC0_BABT (47) +#define INT0_HI_FEC0_BABR (48) +#define INT0_HI_FEC1_TXF (49) +#define INT0_HI_FEC1_TXB (50) +#define INT0_HI_FEC1_UN (51) +#define INT0_HI_FEC1_RL (52) +#define INT0_HI_FEC1_RXF (53) +#define INT0_HI_FEC1_RXB (54) +#define INT0_HI_FEC1_MII (55) +#define INT0_HI_FEC1_LC (56) +#define INT0_HI_FEC1_HBERR (57) +#define INT0_HI_FEC1_GRA (58) +#define INT0_HI_FEC1_EBERR (59) +#define INT0_HI_FEC1_BABT (60) +#define INT0_HI_FEC1_BABR (61) +#define INT0_HI_SCMIR (62) +#define INT0_HI_RTC_ISR (63) + +#define INT1_HI_DSPI_EOQF (33) +#define INT1_HI_DSPI_TFFF (34) +#define INT1_HI_DSPI_TCF (35) +#define INT1_HI_DSPI_TFUF (36) +#define INT1_HI_DSPI_RFDF (37) +#define INT1_HI_DSPI_RFOF (38) +#define INT1_HI_DSPI_RFOF_TFUF (39) +#define INT1_HI_RNG_EI (40) +#define INT1_HI_PIT0_PIF (43) +#define INT1_HI_PIT1_PIF (44) +#define INT1_HI_PIT2_PIF (45) +#define INT1_HI_PIT3_PIF (46) +#define INT1_HI_USBOTG_USBSTS (47) +#define INT1_HI_SSI_ISR (49) +#define INT1_HI_CCM_UOCSR (53) +#define INT1_HI_ATA_ISR (54) +#define INT1_HI_PCI_SCR (55) +#define INT1_HI_PCI_ASR (56) +#define INT1_HI_PLL_LOCKS (57) + +/* Bit definitions and macros for IPRH */ +#define INTC_IPRH_INT32 (0x00000001) +#define INTC_IPRH_INT33 (0x00000002) +#define INTC_IPRH_INT34 (0x00000004) +#define INTC_IPRH_INT35 (0x00000008) +#define INTC_IPRH_INT36 (0x00000010) +#define INTC_IPRH_INT37 (0x00000020) +#define INTC_IPRH_INT38 (0x00000040) +#define INTC_IPRH_INT39 (0x00000080) +#define INTC_IPRH_INT40 (0x00000100) +#define INTC_IPRH_INT41 (0x00000200) +#define INTC_IPRH_INT42 (0x00000400) +#define INTC_IPRH_INT43 (0x00000800) +#define INTC_IPRH_INT44 (0x00001000) +#define INTC_IPRH_INT45 (0x00002000) +#define INTC_IPRH_INT46 (0x00004000) +#define INTC_IPRH_INT47 (0x00008000) +#define INTC_IPRH_INT48 (0x00010000) +#define INTC_IPRH_INT49 (0x00020000) +#define INTC_IPRH_INT50 (0x00040000) +#define INTC_IPRH_INT51 (0x00080000) +#define INTC_IPRH_INT52 (0x00100000) +#define INTC_IPRH_INT53 (0x00200000) +#define INTC_IPRH_INT54 (0x00400000) +#define INTC_IPRH_INT55 (0x00800000) +#define INTC_IPRH_INT56 (0x01000000) +#define INTC_IPRH_INT57 (0x02000000) +#define INTC_IPRH_INT58 (0x04000000) +#define INTC_IPRH_INT59 (0x08000000) +#define INTC_IPRH_INT60 (0x10000000) +#define INTC_IPRH_INT61 (0x20000000) +#define INTC_IPRH_INT62 (0x40000000) +#define INTC_IPRH_INT63 (0x80000000) + +/* Bit definitions and macros for IPRL */ +#define INTC_IPRL_INT0 (0x00000001) +#define INTC_IPRL_INT1 (0x00000002) +#define INTC_IPRL_INT2 (0x00000004) +#define INTC_IPRL_INT3 (0x00000008) +#define INTC_IPRL_INT4 (0x00000010) +#define INTC_IPRL_INT5 (0x00000020) +#define INTC_IPRL_INT6 (0x00000040) +#define INTC_IPRL_INT7 (0x00000080) +#define INTC_IPRL_INT8 (0x00000100) +#define INTC_IPRL_INT9 (0x00000200) +#define INTC_IPRL_INT10 (0x00000400) +#define INTC_IPRL_INT11 (0x00000800) +#define INTC_IPRL_INT12 (0x00001000) +#define INTC_IPRL_INT13 (0x00002000) +#define INTC_IPRL_INT14 (0x00004000) +#define INTC_IPRL_INT15 (0x00008000) +#define INTC_IPRL_INT16 (0x00010000) +#define INTC_IPRL_INT17 (0x00020000) +#define INTC_IPRL_INT18 (0x00040000) +#define INTC_IPRL_INT19 (0x00080000) +#define INTC_IPRL_INT20 (0x00100000) +#define INTC_IPRL_INT21 (0x00200000) +#define INTC_IPRL_INT22 (0x00400000) +#define INTC_IPRL_INT23 (0x00800000) +#define INTC_IPRL_INT24 (0x01000000) +#define INTC_IPRL_INT25 (0x02000000) +#define INTC_IPRL_INT26 (0x04000000) +#define INTC_IPRL_INT27 (0x08000000) +#define INTC_IPRL_INT28 (0x10000000) +#define INTC_IPRL_INT29 (0x20000000) +#define INTC_IPRL_INT30 (0x40000000) +#define INTC_IPRL_INT31 (0x80000000) + +/* Bit definitions and macros for IMRH */ +#define INTC_IMRH_INT_MASK32 (0x00000001) +#define INTC_IMRH_INT_MASK33 (0x00000002) +#define INTC_IMRH_INT_MASK34 (0x00000004) +#define INTC_IMRH_INT_MASK35 (0x00000008) +#define INTC_IMRH_INT_MASK36 (0x00000010) +#define INTC_IMRH_INT_MASK37 (0x00000020) +#define INTC_IMRH_INT_MASK38 (0x00000040) +#define INTC_IMRH_INT_MASK39 (0x00000080) +#define INTC_IMRH_INT_MASK40 (0x00000100) +#define INTC_IMRH_INT_MASK41 (0x00000200) +#define INTC_IMRH_INT_MASK42 (0x00000400) +#define INTC_IMRH_INT_MASK43 (0x00000800) +#define INTC_IMRH_INT_MASK44 (0x00001000) +#define INTC_IMRH_INT_MASK45 (0x00002000) +#define INTC_IMRH_INT_MASK46 (0x00004000) +#define INTC_IMRH_INT_MASK47 (0x00008000) +#define INTC_IMRH_INT_MASK48 (0x00010000) +#define INTC_IMRH_INT_MASK49 (0x00020000) +#define INTC_IMRH_INT_MASK50 (0x00040000) +#define INTC_IMRH_INT_MASK51 (0x00080000) +#define INTC_IMRH_INT_MASK52 (0x00100000) +#define INTC_IMRH_INT_MASK53 (0x00200000) +#define INTC_IMRH_INT_MASK54 (0x00400000) +#define INTC_IMRH_INT_MASK55 (0x00800000) +#define INTC_IMRH_INT_MASK56 (0x01000000) +#define INTC_IMRH_INT_MASK57 (0x02000000) +#define INTC_IMRH_INT_MASK58 (0x04000000) +#define INTC_IMRH_INT_MASK59 (0x08000000) +#define INTC_IMRH_INT_MASK60 (0x10000000) +#define INTC_IMRH_INT_MASK61 (0x20000000) +#define INTC_IMRH_INT_MASK62 (0x40000000) +#define INTC_IMRH_INT_MASK63 (0x80000000) + +/* Bit definitions and macros for IMRL */ +#define INTC_IMRL_INT_MASK0 (0x00000001) +#define INTC_IMRL_INT_MASK1 (0x00000002) +#define INTC_IMRL_INT_MASK2 (0x00000004) +#define INTC_IMRL_INT_MASK3 (0x00000008) +#define INTC_IMRL_INT_MASK4 (0x00000010) +#define INTC_IMRL_INT_MASK5 (0x00000020) +#define INTC_IMRL_INT_MASK6 (0x00000040) +#define INTC_IMRL_INT_MASK7 (0x00000080) +#define INTC_IMRL_INT_MASK8 (0x00000100) +#define INTC_IMRL_INT_MASK9 (0x00000200) +#define INTC_IMRL_INT_MASK10 (0x00000400) +#define INTC_IMRL_INT_MASK11 (0x00000800) +#define INTC_IMRL_INT_MASK12 (0x00001000) +#define INTC_IMRL_INT_MASK13 (0x00002000) +#define INTC_IMRL_INT_MASK14 (0x00004000) +#define INTC_IMRL_INT_MASK15 (0x00008000) +#define INTC_IMRL_INT_MASK16 (0x00010000) +#define INTC_IMRL_INT_MASK17 (0x00020000) +#define INTC_IMRL_INT_MASK18 (0x00040000) +#define INTC_IMRL_INT_MASK19 (0x00080000) +#define INTC_IMRL_INT_MASK20 (0x00100000) +#define INTC_IMRL_INT_MASK21 (0x00200000) +#define INTC_IMRL_INT_MASK22 (0x00400000) +#define INTC_IMRL_INT_MASK23 (0x00800000) +#define INTC_IMRL_INT_MASK24 (0x01000000) +#define INTC_IMRL_INT_MASK25 (0x02000000) +#define INTC_IMRL_INT_MASK26 (0x04000000) +#define INTC_IMRL_INT_MASK27 (0x08000000) +#define INTC_IMRL_INT_MASK28 (0x10000000) +#define INTC_IMRL_INT_MASK29 (0x20000000) +#define INTC_IMRL_INT_MASK30 (0x40000000) +#define INTC_IMRL_INT_MASK31 (0x80000000) + +/* Bit definitions and macros for INTFRCH */ +#define INTC_INTFRCH_INTFRC32 (0x00000001) +#define INTC_INTFRCH_INTFRC33 (0x00000002) +#define INTC_INTFRCH_INTFRC34 (0x00000004) +#define INTC_INTFRCH_INTFRC35 (0x00000008) +#define INTC_INTFRCH_INTFRC36 (0x00000010) +#define INTC_INTFRCH_INTFRC37 (0x00000020) +#define INTC_INTFRCH_INTFRC38 (0x00000040) +#define INTC_INTFRCH_INTFRC39 (0x00000080) +#define INTC_INTFRCH_INTFRC40 (0x00000100) +#define INTC_INTFRCH_INTFRC41 (0x00000200) +#define INTC_INTFRCH_INTFRC42 (0x00000400) +#define INTC_INTFRCH_INTFRC43 (0x00000800) +#define INTC_INTFRCH_INTFRC44 (0x00001000) +#define INTC_INTFRCH_INTFRC45 (0x00002000) +#define INTC_INTFRCH_INTFRC46 (0x00004000) +#define INTC_INTFRCH_INTFRC47 (0x00008000) +#define INTC_INTFRCH_INTFRC48 (0x00010000) +#define INTC_INTFRCH_INTFRC49 (0x00020000) +#define INTC_INTFRCH_INTFRC50 (0x00040000) +#define INTC_INTFRCH_INTFRC51 (0x00080000) +#define INTC_INTFRCH_INTFRC52 (0x00100000) +#define INTC_INTFRCH_INTFRC53 (0x00200000) +#define INTC_INTFRCH_INTFRC54 (0x00400000) +#define INTC_INTFRCH_INTFRC55 (0x00800000) +#define INTC_INTFRCH_INTFRC56 (0x01000000) +#define INTC_INTFRCH_INTFRC57 (0x02000000) +#define INTC_INTFRCH_INTFRC58 (0x04000000) +#define INTC_INTFRCH_INTFRC59 (0x08000000) +#define INTC_INTFRCH_INTFRC60 (0x10000000) +#define INTC_INTFRCH_INTFRC61 (0x20000000) +#define INTC_INTFRCH_INTFRC62 (0x40000000) +#define INTC_INTFRCH_INTFRC63 (0x80000000) + +/* Bit definitions and macros for INTFRCL */ +#define INTC_INTFRCL_INTFRC0 (0x00000001) +#define INTC_INTFRCL_INTFRC1 (0x00000002) +#define INTC_INTFRCL_INTFRC2 (0x00000004) +#define INTC_INTFRCL_INTFRC3 (0x00000008) +#define INTC_INTFRCL_INTFRC4 (0x00000010) +#define INTC_INTFRCL_INTFRC5 (0x00000020) +#define INTC_INTFRCL_INTFRC6 (0x00000040) +#define INTC_INTFRCL_INTFRC7 (0x00000080) +#define INTC_INTFRCL_INTFRC8 (0x00000100) +#define INTC_INTFRCL_INTFRC9 (0x00000200) +#define INTC_INTFRCL_INTFRC10 (0x00000400) +#define INTC_INTFRCL_INTFRC11 (0x00000800) +#define INTC_INTFRCL_INTFRC12 (0x00001000) +#define INTC_INTFRCL_INTFRC13 (0x00002000) +#define INTC_INTFRCL_INTFRC14 (0x00004000) +#define INTC_INTFRCL_INTFRC15 (0x00008000) +#define INTC_INTFRCL_INTFRC16 (0x00010000) +#define INTC_INTFRCL_INTFRC17 (0x00020000) +#define INTC_INTFRCL_INTFRC18 (0x00040000) +#define INTC_INTFRCL_INTFRC19 (0x00080000) +#define INTC_INTFRCL_INTFRC20 (0x00100000) +#define INTC_INTFRCL_INTFRC21 (0x00200000) +#define INTC_INTFRCL_INTFRC22 (0x00400000) +#define INTC_INTFRCL_INTFRC23 (0x00800000) +#define INTC_INTFRCL_INTFRC24 (0x01000000) +#define INTC_INTFRCL_INTFRC25 (0x02000000) +#define INTC_INTFRCL_INTFRC26 (0x04000000) +#define INTC_INTFRCL_INTFRC27 (0x08000000) +#define INTC_INTFRCL_INTFRC28 (0x10000000) +#define INTC_INTFRCL_INTFRC29 (0x20000000) +#define INTC_INTFRCL_INTFRC30 (0x40000000) +#define INTC_INTFRCL_INTFRC31 (0x80000000) + +/* Bit definitions and macros for ICONFIG */ +#define INTC_ICONFIG_EMASK (0x0020) +#define INTC_ICONFIG_ELVLPRI1 (0x0200) +#define INTC_ICONFIG_ELVLPRI2 (0x0400) +#define INTC_ICONFIG_ELVLPRI3 (0x0800) +#define INTC_ICONFIG_ELVLPRI4 (0x1000) +#define INTC_ICONFIG_ELVLPRI5 (0x2000) +#define INTC_ICONFIG_ELVLPRI6 (0x4000) +#define INTC_ICONFIG_ELVLPRI7 (0x8000) + +/* Bit definitions and macros for SIMR */ +#define INTC_SIMR_SIMR(x) (((x)&0x7F)) + +/* Bit definitions and macros for CIMR */ +#define INTC_CIMR_CIMR(x) (((x)&0x7F)) + +/* Bit definitions and macros for CLMASK */ +#define INTC_CLMASK_CLMASK(x) (((x)&0x0F)) + +/* Bit definitions and macros for SLMASK */ +#define INTC_SLMASK_SLMASK(x) (((x)&0x0F)) + +/* Bit definitions and macros for ICR group */ +#define INTC_ICR_IL(x) (((x)&0x07)) + +/********************************************************************* +* DMA Serial Peripheral Interface (DSPI) +*********************************************************************/ + +/* Bit definitions and macros for DMCR */ +#define DSPI_DMCR_HALT (0x00000001) +#define DSPI_DMCR_SMPL_PT(x) (((x)&0x00000003)<<8) +#define DSPI_DMCR_CRXF (0x00000400) +#define DSPI_DMCR_CTXF (0x00000800) +#define DSPI_DMCR_DRXF (0x00001000) +#define DSPI_DMCR_DTXF (0x00002000) +#define DSPI_DMCR_CSIS0 (0x00010000) +#define DSPI_DMCR_CSIS2 (0x00040000) +#define DSPI_DMCR_CSIS3 (0x00080000) +#define DSPI_DMCR_CSIS5 (0x00200000) +#define DSPI_DMCR_ROOE (0x01000000) +#define DSPI_DMCR_PCSSE (0x02000000) +#define DSPI_DMCR_MTFE (0x04000000) +#define DSPI_DMCR_FRZ (0x08000000) +#define DSPI_DMCR_DCONF(x) (((x)&0x00000003)<<28) +#define DSPI_DMCR_CSCK (0x40000000) +#define DSPI_DMCR_MSTR (0x80000000) + +/* Bit definitions and macros for DTCR */ +#define DSPI_DTCR_SPI_TCNT(x) (((x)&0x0000FFFF)<<16) + +/* Bit definitions and macros for DCTAR group */ +#define DSPI_DCTAR_BR(x) (((x)&0x0000000F)) +#define DSPI_DCTAR_DT(x) (((x)&0x0000000F)<<4) +#define DSPI_DCTAR_ASC(x) (((x)&0x0000000F)<<8) +#define DSPI_DCTAR_CSSCK(x) (((x)&0x0000000F)<<12) +#define DSPI_DCTAR_PBR(x) (((x)&0x00000003)<<16) +#define DSPI_DCTAR_PDT(x) (((x)&0x00000003)<<18) +#define DSPI_DCTAR_PASC(x) (((x)&0x00000003)<<20) +#define DSPI_DCTAR_PCSSCK(x) (((x)&0x00000003)<<22) +#define DSPI_DCTAR_LSBFE (0x01000000) +#define DSPI_DCTAR_CPHA (0x02000000) +#define DSPI_DCTAR_CPOL (0x04000000) +#define DSPI_DCTAR_TRSZ(x) (((x)&0x0000000F)<<27) +#define DSPI_DCTAR_PCSSCK_1CLK (0x00000000) +#define DSPI_DCTAR_PCSSCK_3CLK (0x00400000) +#define DSPI_DCTAR_PCSSCK_5CLK (0x00800000) +#define DSPI_DCTAR_PCSSCK_7CLK (0x00A00000) +#define DSPI_DCTAR_PASC_1CLK (0x00000000) +#define DSPI_DCTAR_PASC_3CLK (0x00100000) +#define DSPI_DCTAR_PASC_5CLK (0x00200000) +#define DSPI_DCTAR_PASC_7CLK (0x00300000) +#define DSPI_DCTAR_PDT_1CLK (0x00000000) +#define DSPI_DCTAR_PDT_3CLK (0x00040000) +#define DSPI_DCTAR_PDT_5CLK (0x00080000) +#define DSPI_DCTAR_PDT_7CLK (0x000A0000) +#define DSPI_DCTAR_PBR_1CLK (0x00000000) +#define DSPI_DCTAR_PBR_3CLK (0x00010000) +#define DSPI_DCTAR_PBR_5CLK (0x00020000) +#define DSPI_DCTAR_PBR_7CLK (0x00030000) + +/* Bit definitions and macros for DSR */ +#define DSPI_DSR_RXPTR(x) (((x)&0x0000000F)) +#define DSPI_DSR_RXCTR(x) (((x)&0x0000000F)<<4) +#define DSPI_DSR_TXPTR(x) (((x)&0x0000000F)<<8) +#define DSPI_DSR_TXCTR(x) (((x)&0x0000000F)<<12) +#define DSPI_DSR_RFDF (0x00020000) +#define DSPI_DSR_RFOF (0x00080000) +#define DSPI_DSR_TFFF (0x02000000) +#define DSPI_DSR_TFUF (0x08000000) +#define DSPI_DSR_EOQF (0x10000000) +#define DSPI_DSR_TXRXS (0x40000000) +#define DSPI_DSR_TCF (0x80000000) + +/* Bit definitions and macros for DIRSR */ +#define DSPI_DIRSR_RFDFS (0x00010000) +#define DSPI_DIRSR_RFDFE (0x00020000) +#define DSPI_DIRSR_RFOFE (0x00080000) +#define DSPI_DIRSR_TFFFS (0x01000000) +#define DSPI_DIRSR_TFFFE (0x02000000) +#define DSPI_DIRSR_TFUFE (0x08000000) +#define DSPI_DIRSR_EOQFE (0x10000000) +#define DSPI_DIRSR_TCFE (0x80000000) + +/* Bit definitions and macros for DTFR */ +#define DSPI_DTFR_TXDATA(x) (((x)&0x0000FFFF)) +#define DSPI_DTFR_CS0 (0x00010000) +#define DSPI_DTFR_CS2 (0x00040000) +#define DSPI_DTFR_CS3 (0x00080000) +#define DSPI_DTFR_CS5 (0x00200000) +#define DSPI_DTFR_CTCNT (0x04000000) +#define DSPI_DTFR_EOQ (0x08000000) +#define DSPI_DTFR_CTAS(x) (((x)&0x00000007)<<28) +#define DSPI_DTFR_CONT (0x80000000) + +/* Bit definitions and macros for DRFR */ +#define DSPI_DRFR_RXDATA(x) (((x)&0x0000FFFF)) + +/* Bit definitions and macros for DTFDR group */ +#define DSPI_DTFDR_TXDATA(x) (((x)&0x0000FFFF)) +#define DSPI_DTFDR_TXCMD(x) (((x)&0x0000FFFF)<<16) + +/* Bit definitions and macros for DRFDR group */ +#define DSPI_DRFDR_RXDATA(x) (((x)&0x0000FFFF)) + +/********************************************************************* +* Edge Port Module (EPORT) +*********************************************************************/ + +/* Bit definitions and macros for EPPAR */ +#define EPORT_EPPAR_EPPA1(x) (((x)&0x0003)<<2) +#define EPORT_EPPAR_EPPA2(x) (((x)&0x0003)<<4) +#define EPORT_EPPAR_EPPA3(x) (((x)&0x0003)<<6) +#define EPORT_EPPAR_EPPA4(x) (((x)&0x0003)<<8) +#define EPORT_EPPAR_EPPA5(x) (((x)&0x0003)<<10) +#define EPORT_EPPAR_EPPA6(x) (((x)&0x0003)<<12) +#define EPORT_EPPAR_EPPA7(x) (((x)&0x0003)<<14) +#define EPORT_EPPAR_LEVEL (0) +#define EPORT_EPPAR_RISING (1) +#define EPORT_EPPAR_FALLING (2) +#define EPORT_EPPAR_BOTH (3) +#define EPORT_EPPAR_EPPA7_LEVEL (0x0000) +#define EPORT_EPPAR_EPPA7_RISING (0x4000) +#define EPORT_EPPAR_EPPA7_FALLING (0x8000) +#define EPORT_EPPAR_EPPA7_BOTH (0xC000) +#define EPORT_EPPAR_EPPA6_LEVEL (0x0000) +#define EPORT_EPPAR_EPPA6_RISING (0x1000) +#define EPORT_EPPAR_EPPA6_FALLING (0x2000) +#define EPORT_EPPAR_EPPA6_BOTH (0x3000) +#define EPORT_EPPAR_EPPA5_LEVEL (0x0000) +#define EPORT_EPPAR_EPPA5_RISING (0x0400) +#define EPORT_EPPAR_EPPA5_FALLING (0x0800) +#define EPORT_EPPAR_EPPA5_BOTH (0x0C00) +#define EPORT_EPPAR_EPPA4_LEVEL (0x0000) +#define EPORT_EPPAR_EPPA4_RISING (0x0100) +#define EPORT_EPPAR_EPPA4_FALLING (0x0200) +#define EPORT_EPPAR_EPPA4_BOTH (0x0300) +#define EPORT_EPPAR_EPPA3_LEVEL (0x0000) +#define EPORT_EPPAR_EPPA3_RISING (0x0040) +#define EPORT_EPPAR_EPPA3_FALLING (0x0080) +#define EPORT_EPPAR_EPPA3_BOTH (0x00C0) +#define EPORT_EPPAR_EPPA2_LEVEL (0x0000) +#define EPORT_EPPAR_EPPA2_RISING (0x0010) +#define EPORT_EPPAR_EPPA2_FALLING (0x0020) +#define EPORT_EPPAR_EPPA2_BOTH (0x0030) +#define EPORT_EPPAR_EPPA1_LEVEL (0x0000) +#define EPORT_EPPAR_EPPA1_RISING (0x0004) +#define EPORT_EPPAR_EPPA1_FALLING (0x0008) +#define EPORT_EPPAR_EPPA1_BOTH (0x000C) + +/* Bit definitions and macros for EPDDR */ +#define EPORT_EPDDR_EPDD1 (0x02) +#define EPORT_EPDDR_EPDD2 (0x04) +#define EPORT_EPDDR_EPDD3 (0x08) +#define EPORT_EPDDR_EPDD4 (0x10) +#define EPORT_EPDDR_EPDD5 (0x20) +#define EPORT_EPDDR_EPDD6 (0x40) +#define EPORT_EPDDR_EPDD7 (0x80) + +/* Bit definitions and macros for EPIER */ +#define EPORT_EPIER_EPIE1 (0x02) +#define EPORT_EPIER_EPIE2 (0x04) +#define EPORT_EPIER_EPIE3 (0x08) +#define EPORT_EPIER_EPIE4 (0x10) +#define EPORT_EPIER_EPIE5 (0x20) +#define EPORT_EPIER_EPIE6 (0x40) +#define EPORT_EPIER_EPIE7 (0x80) + +/* Bit definitions and macros for EPDR */ +#define EPORT_EPDR_EPD1 (0x02) +#define EPORT_EPDR_EPD2 (0x04) +#define EPORT_EPDR_EPD3 (0x08) +#define EPORT_EPDR_EPD4 (0x10) +#define EPORT_EPDR_EPD5 (0x20) +#define EPORT_EPDR_EPD6 (0x40) +#define EPORT_EPDR_EPD7 (0x80) + +/* Bit definitions and macros for EPPDR */ +#define EPORT_EPPDR_EPPD1 (0x02) +#define EPORT_EPPDR_EPPD2 (0x04) +#define EPORT_EPPDR_EPPD3 (0x08) +#define EPORT_EPPDR_EPPD4 (0x10) +#define EPORT_EPPDR_EPPD5 (0x20) +#define EPORT_EPPDR_EPPD6 (0x40) +#define EPORT_EPPDR_EPPD7 (0x80) + +/* Bit definitions and macros for EPFR */ +#define EPORT_EPFR_EPF1 (0x02) +#define EPORT_EPFR_EPF2 (0x04) +#define EPORT_EPFR_EPF3 (0x08) +#define EPORT_EPFR_EPF4 (0x10) +#define EPORT_EPFR_EPF5 (0x20) +#define EPORT_EPFR_EPF6 (0x40) +#define EPORT_EPFR_EPF7 (0x80) + +/********************************************************************* +* Watchdog Timer Modules (WTM) +*********************************************************************/ + +/* Bit definitions and macros for WCR */ +#define WTM_WCR_EN (0x0001) +#define WTM_WCR_HALTED (0x0002) +#define WTM_WCR_DOZE (0x0004) +#define WTM_WCR_WAIT (0x0008) + +/********************************************************************* +* Serial Boot Facility (SBF) +*********************************************************************/ + +/* Bit definitions and macros for SBFCR */ +#define SBF_SBFCR_BLDIV(x) (((x)&0x000F)) /* Boot loader clock divider */ +#define SBF_SBFCR_FR (0x0010) /* Fast read */ + +/********************************************************************* +* Reset Controller Module (RCM) +*********************************************************************/ + +/* Bit definitions and macros for RCR */ +#define RCM_RCR_FRCRSTOUT (0x40) +#define RCM_RCR_SOFTRST (0x80) + +/* Bit definitions and macros for RSR */ +#define RCM_RSR_LOL (0x01) +#define RCM_RSR_WDR_CORE (0x02) +#define RCM_RSR_EXT (0x04) +#define RCM_RSR_POR (0x08) +#define RCM_RSR_SOFT (0x20) + +/********************************************************************* +* Chip Configuration Module (CCM) +*********************************************************************/ + +/* Bit definitions and macros for CCR_360 */ +#define CCM_CCR_360_PLLMULT2(x) (((x)&0x0003)) /* 2-Bit PLL clock mode */ +#define CCM_CCR_360_PCISLEW (0x0004) /* PCI pad slew rate mode */ +#define CCM_CCR_360_PCIMODE (0x0008) /* PCI host/agent mode */ +#define CCM_CCR_360_PLLMODE (0x0010) /* PLL Mode */ +#define CCM_CCR_360_FBCONFIG(x) (((x)&0x0007)<<5) /* Flexbus/PCI port size configuration */ +#define CCM_CCR_360_PLLMULT3(x) (((x)&0x0007)) /* 3-Bit PLL Clock Mode */ +#define CCM_CCR_360_OSCMODE (0x0008) /* Oscillator Clock Mode */ +#define CCM_CCR_360_FBCONFIG_MASK (0x00E0) +#define CCM_CCR_360_PLLMULT2_MASK (0x0003) +#define CCM_CCR_360_PLLMULT3_MASK (0x0007) +#define CCM_CCR_360_FBCONFIG_NM_NP_32 (0x0000) +#define CCM_CCR_360_FBCONFIG_NM_NP_8 (0x0020) +#define CCM_CCR_360_FBCONFIG_NM_NP_16 (0x0040) +#define CCM_CCR_360_FBCONFIG_M_P_16 (0x0060) +#define CCM_CCR_360_FBCONFIG_M_NP_32 (0x0080) +#define CCM_CCR_360_FBCONFIG_M_NP_8 (0x00A0) +#define CCM_CCR_360_FBCONFIG_M_NP_16 (0x00C0) +#define CCM_CCR_360_FBCONFIG_M_P_8 (0x00E0) +#define CCM_CCR_360_PLLMULT2_12X (0x0000) +#define CCM_CCR_360_PLLMULT2_6X (0x0001) +#define CCM_CCR_360_PLLMULT2_16X (0x0002) +#define CCM_CCR_360_PLLMULT2_8X (0x0003) +#define CCM_CCR_360_PLLMULT3_20X (0x0000) +#define CCM_CCR_360_PLLMULT3_10X (0x0001) +#define CCM_CCR_360_PLLMULT3_24X (0x0002) +#define CCM_CCR_360_PLLMULT3_18X (0x0003) +#define CCM_CCR_360_PLLMULT3_12X (0x0004) +#define CCM_CCR_360_PLLMULT3_6X (0x0005) +#define CCM_CCR_360_PLLMULT3_16X (0x0006) +#define CCM_CCR_360_PLLMULT3_8X (0x0007) + +/* Bit definitions and macros for CCR_256 */ +#define CCM_CCR_256_PLLMULT3(x) (((x)&0x0007)) /* 3-Bit PLL clock mode */ +#define CCM_CCR_256_OSCMODE (0x0008) /* Oscillator clock mode */ +#define CCM_CCR_256_PLLMODE (0x0010) /* PLL Mode */ +#define CCM_CCR_256_FBCONFIG(x) (((x)&0x0007)<<5) /* Flexbus/PCI port size configuration */ +#define CCM_CCR_256_FBCONFIG_MASK (0x00E0) +#define CCM_CCR_256_FBCONFIG_NM_32 (0x0000) +#define CCM_CCR_256_FBCONFIG_NM_8 (0x0020) +#define CCM_CCR_256_FBCONFIG_NM_16 (0x0040) +#define CCM_CCR_256_FBCONFIG_M_32 (0x0080) +#define CCM_CCR_256_FBCONFIG_M_8 (0x00A0) +#define CCM_CCR_256_FBCONFIG_M_16 (0x00C0) +#define CCM_CCR_256_PLLMULT3_MASK (0x0007) +#define CCM_CCR_256_PLLMULT3_20X (0x0000) +#define CCM_CCR_256_PLLMULT3_10X (0x0001) +#define CCM_CCR_256_PLLMULT3_24X (0x0002) +#define CCM_CCR_256_PLLMULT3_18X (0x0003) +#define CCM_CCR_256_PLLMULT3_12X (0x0004) +#define CCM_CCR_256_PLLMULT3_6X (0x0005) +#define CCM_CCR_256_PLLMULT3_16X (0x0006) +#define CCM_CCR_256_PLLMULT3_8X (0x0007) + +/* Bit definitions and macros for RCON_360 */ +#define CCM_RCON_360_PLLMULT(x) (((x)&0x0003)) /* PLL clock mode */ +#define CCM_RCON_360_PCISLEW (0x0004) /* PCI pad slew rate mode */ +#define CCM_RCON_360_PCIMODE (0x0008) /* PCI host/agent mode */ +#define CCM_RCON_360_PLLMODE (0x0010) /* PLL Mode */ +#define CCM_RCON_360_FBCONFIG(x) (((x)&0x0007)<<5) /* Flexbus/PCI port size configuration */ + +/* Bit definitions and macros for RCON_256 */ +#define CCM_RCON_256_PLLMULT(x) (((x)&0x0007)) /* PLL clock mode */ +#define CCM_RCON_256_OSCMODE (0x0008) /* Oscillator clock mode */ +#define CCM_RCON_256_PLLMODE (0x0010) /* PLL Mode */ +#define CCM_RCON_256_FBCONFIG(x) (((x)&0x0007)<<5) /* Flexbus/PCI port size configuration */ + +/* Bit definitions and macros for CIR */ +#define CCM_CIR_PRN(x) (((x)&0x003F)) /* Part revision number */ +#define CCM_CIR_PIN(x) (((x)&0x03FF)<<6) /* Part identification number */ +#define CCM_CIR_PIN_MASK (0xFFC0) +#define CCM_CIR_PRN_MASK (0x003F) +#define CCM_CIR_PIN_MCF54450 (0x4F<<6) +#define CCM_CIR_PIN_MCF54451 (0x4D<<6) +#define CCM_CIR_PIN_MCF54452 (0x4B<<6) +#define CCM_CIR_PIN_MCF54453 (0x49<<6) +#define CCM_CIR_PIN_MCF54454 (0x4A<<6) +#define CCM_CIR_PIN_MCF54455 (0x48<<6) + +/* Bit definitions and macros for MISCCR */ +#define CCM_MISCCR_USBSRC (0x0001) /* USB clock source */ +#define CCM_MISCCR_USBOC (0x0002) /* USB VBUS over-current sense polarity */ +#define CCM_MISCCR_USBPUE (0x0004) /* USB transceiver pull-up enable */ +#define CCM_MISCCR_SSISRC (0x0010) /* SSI clock source */ +#define CCM_MISCCR_TIMDMA (0x0020) /* Timer DMA mux selection */ +#define CCM_MISCCR_SSIPUS (0x0040) /* SSI RXD/TXD pull select */ +#define CCM_MISCCR_SSIPUE (0x0080) /* SSI RXD/TXD pull enable */ +#define CCM_MISCCR_BMT(x) (((x)&0x0007)<<8) /* Bus monitor timing field */ +#define CCM_MISCCR_BME (0x0800) /* Bus monitor external enable bit */ +#define CCM_MISCCR_LIMP (0x1000) /* Limp mode enable */ +#define CCM_MISCCR_BMT_65536 (0) +#define CCM_MISCCR_BMT_32768 (1) +#define CCM_MISCCR_BMT_16384 (2) +#define CCM_MISCCR_BMT_8192 (3) +#define CCM_MISCCR_BMT_4096 (4) +#define CCM_MISCCR_BMT_2048 (5) +#define CCM_MISCCR_BMT_1024 (6) +#define CCM_MISCCR_BMT_512 (7) +#define CCM_MISCCR_SSIPUS_UP (1) +#define CCM_MISCCR_SSIPUS_DOWN (0) +#define CCM_MISCCR_TIMDMA_TIM (1) +#define CCM_MISCCR_TIMDMA_SSI (0) +#define CCM_MISCCR_SSISRC_CLKIN (0) +#define CCM_MISCCR_SSISRC_PLL (1) +#define CCM_MISCCR_USBOC_ACTHI (0) +#define CCM_MISCCR_USBOV_ACTLO (1) +#define CCM_MISCCR_USBSRC_CLKIN (0) +#define CCM_MISCCR_USBSRC_PLL (1) + +/* Bit definitions and macros for CDR */ +#define CCM_CDR_SSIDIV(x) (((x)&0x00FF)) /* SSI oversampling clock divider */ +#define CCM_CDR_LPDIV(x) (((x)&0x000F)<<8) /* Low power clock divider */ + +/* Bit definitions and macros for UOCSR */ +#define CCM_UOCSR_XPDE (0x0001) /* On-chip transceiver pull-down enable */ +#define CCM_UOCSR_UOMIE (0x0002) /* USB OTG misc interrupt enable */ +#define CCM_UOCSR_WKUP (0x0004) /* USB OTG controller wake-up event */ +#define CCM_UOCSR_PWRFLT (0x0008) /* VBUS power fault */ +#define CCM_UOCSR_SEND (0x0010) /* Session end */ +#define CCM_UOCSR_VVLD (0x0020) /* VBUS valid indicator */ +#define CCM_UOCSR_BVLD (0x0040) /* B-peripheral valid indicator */ +#define CCM_UOCSR_AVLD (0x0080) /* A-peripheral valid indicator */ +#define CCM_UOCSR_DPPU (0x0100) /* D+ pull-up for FS enabled (read-only) */ +#define CCM_UOCSR_DCR_VBUS (0x0200) /* VBUS discharge resistor enabled (read-only) */ +#define CCM_UOCSR_CRG_VBUS (0x0400) /* VBUS charge resistor enabled (read-only) */ +#define CCM_UOCSR_DMPD (0x1000) /* D- 15Kohm pull-down (read-only) */ +#define CCM_UOCSR_DPPD (0x2000) /* D+ 15Kohm pull-down (read-only) */ + +/********************************************************************* +* General Purpose I/O Module (GPIO) +*********************************************************************/ + +/* Bit definitions and macros for PAR_FEC */ +#define GPIO_PAR_FEC_FEC0(x) (((x)&0x07)) +#define GPIO_PAR_FEC_FEC1(x) (((x)&0x07)<<4) +#define GPIO_PAR_FEC_FEC1_MASK (0x8F) +#define GPIO_PAR_FEC_FEC1_MII (0x70) +#define GPIO_PAR_FEC_FEC1_RMII_GPIO (0x30) +#define GPIO_PAR_FEC_FEC1_RMII_ATA (0x20) +#define GPIO_PAR_FEC_FEC1_ATA (0x10) +#define GPIO_PAR_FEC_FEC1_GPIO (0x00) +#define GPIO_PAR_FEC_FEC0_MASK (0xF8) +#define GPIO_PAR_FEC_FEC0_MII (0x07) +#define GPIO_PAR_FEC_FEC0_RMII_GPIO (0x03) +#define GPIO_PAR_FEC_FEC0_RMII_ATA (0x02) +#define GPIO_PAR_FEC_FEC0_ATA (0x01) +#define GPIO_PAR_FEC_FEC0_GPIO (0x00) + +/* Bit definitions and macros for PAR_DMA */ +#define GPIO_PAR_DMA_DREQ0 (0x01) +#define GPIO_PAR_DMA_DACK0(x) (((x)&0x03)<<2) +#define GPIO_PAR_DMA_DREQ1(x) (((x)&0x03)<<4) +#define GPIO_PAR_DMA_DACK1(x) (((x)&0x03)<<6) +#define GPIO_PAR_DMA_DACK1_MASK (0x3F) +#define GPIO_PAR_DMA_DACK1_DACK1 (0xC0) +#define GPIO_PAR_DMA_DACK1_ULPI_DIR (0x40) +#define GPIO_PAR_DMA_DACK1_GPIO (0x00) +#define GPIO_PAR_DMA_DREQ1_MASK (0xCF) +#define GPIO_PAR_DMA_DREQ1_DREQ1 (0x30) +#define GPIO_PAR_DMA_DREQ1_USB_CLKIN (0x10) +#define GPIO_PAR_DMA_DREQ1_GPIO (0x00) +#define GPIO_PAR_DMA_DACK0_MASK (0xF3) +#define GPIO_PAR_DMA_DACK0_DACK1 (0x0C) +#define GPIO_PAR_DMA_DACK0_ULPI_DIR (0x04) +#define GPIO_PAR_DMA_DACK0_GPIO (0x00) +#define GPIO_PAR_DMA_DREQ0_DREQ0 (0x01) +#define GPIO_PAR_DMA_DREQ0_GPIO (0x00) + +/* Bit definitions and macros for PAR_FBCTL */ +#define GPIO_PAR_FBCTL_TS(x) (((x)&0x03)<<3) +#define GPIO_PAR_FBCTL_RW (0x20) +#define GPIO_PAR_FBCTL_TA (0x40) +#define GPIO_PAR_FBCTL_OE (0x80) +#define GPIO_PAR_FBCTL_OE_OE (0x80) +#define GPIO_PAR_FBCTL_OE_GPIO (0x00) +#define GPIO_PAR_FBCTL_TA_TA (0x40) +#define GPIO_PAR_FBCTL_TA_GPIO (0x00) +#define GPIO_PAR_FBCTL_RW_RW (0x20) +#define GPIO_PAR_FBCTL_RW_GPIO (0x00) +#define GPIO_PAR_FBCTL_TS_MASK (0xE7) +#define GPIO_PAR_FBCTL_TS_TS (0x18) +#define GPIO_PAR_FBCTL_TS_ALE (0x10) +#define GPIO_PAR_FBCTL_TS_TBST (0x08) +#define GPIO_PAR_FBCTL_TS_GPIO (0x80) + +/* Bit definitions and macros for PAR_DSPI */ +#define GPIO_PAR_DSPI_SCK (0x01) +#define GPIO_PAR_DSPI_SOUT (0x02) +#define GPIO_PAR_DSPI_SIN (0x04) +#define GPIO_PAR_DSPI_PCS0 (0x08) +#define GPIO_PAR_DSPI_PCS1 (0x10) +#define GPIO_PAR_DSPI_PCS2 (0x20) +#define GPIO_PAR_DSPI_PCS5 (0x40) +#define GPIO_PAR_DSPI_PCS5_PCS5 (0x40) +#define GPIO_PAR_DSPI_PCS5_GPIO (0x00) +#define GPIO_PAR_DSPI_PCS2_PCS2 (0x20) +#define GPIO_PAR_DSPI_PCS2_GPIO (0x00) +#define GPIO_PAR_DSPI_PCS1_PCS1 (0x10) +#define GPIO_PAR_DSPI_PCS1_GPIO (0x00) +#define GPIO_PAR_DSPI_PCS0_PCS0 (0x08) +#define GPIO_PAR_DSPI_PCS0_GPIO (0x00) +#define GPIO_PAR_DSPI_SIN_SIN (0x04) +#define GPIO_PAR_DSPI_SIN_GPIO (0x00) +#define GPIO_PAR_DSPI_SOUT_SOUT (0x02) +#define GPIO_PAR_DSPI_SOUT_GPIO (0x00) +#define GPIO_PAR_DSPI_SCK_SCK (0x01) +#define GPIO_PAR_DSPI_SCK_GPIO (0x00) + +/* Bit definitions and macros for PAR_BE */ +#define GPIO_PAR_BE_BS0 (0x01) +#define GPIO_PAR_BE_BS1 (0x04) +#define GPIO_PAR_BE_BS2(x) (((x)&0x03)<<4) +#define GPIO_PAR_BE_BS3(x) (((x)&0x03)<<6) +#define GPIO_PAR_BE_BE3_MASK (0x3F) +#define GPIO_PAR_BE_BE3_BE3 (0xC0) +#define GPIO_PAR_BE_BE3_TSIZ1 (0x80) +#define GPIO_PAR_BE_BE3_GPIO (0x00) +#define GPIO_PAR_BE_BE2_MASK (0xCF) +#define GPIO_PAR_BE_BE2_BE2 (0x30) +#define GPIO_PAR_BE_BE2_TSIZ0 (0x20) +#define GPIO_PAR_BE_BE2_GPIO (0x00) +#define GPIO_PAR_BE_BE1_BE1 (0x04) +#define GPIO_PAR_BE_BE1_GPIO (0x00) +#define GPIO_PAR_BE_BE0_BE0 (0x01) +#define GPIO_PAR_BE_BE0_GPIO (0x00) + +/* Bit definitions and macros for PAR_CS */ +#define GPIO_PAR_CS_CS1 (0x02) +#define GPIO_PAR_CS_CS2 (0x04) +#define GPIO_PAR_CS_CS3 (0x08) +#define GPIO_PAR_CS_CS3_CS3 (0x08) +#define GPIO_PAR_CS_CS3_GPIO (0x00) +#define GPIO_PAR_CS_CS2_CS2 (0x04) +#define GPIO_PAR_CS_CS2_GPIO (0x00) +#define GPIO_PAR_CS_CS1_CS1 (0x02) +#define GPIO_PAR_CS_CS1_GPIO (0x00) + +/* Bit definitions and macros for PAR_TIMER */ +#define GPIO_PAR_TIMER_T0IN(x) (((x)&0x03)) +#define GPIO_PAR_TIMER_T1IN(x) (((x)&0x03)<<2) +#define GPIO_PAR_TIMER_T2IN(x) (((x)&0x03)<<4) +#define GPIO_PAR_TIMER_T3IN(x) (((x)&0x03)<<6) +#define GPIO_PAR_TIMER_T3IN_MASK (0x3F) +#define GPIO_PAR_TIMER_T3IN_T3IN (0xC0) +#define GPIO_PAR_TIMER_T3IN_T3OUT (0x80) +#define GPIO_PAR_TIMER_T3IN_U2RXD (0x40) +#define GPIO_PAR_TIMER_T3IN_GPIO (0x00) +#define GPIO_PAR_TIMER_T2IN_MASK (0xCF) +#define GPIO_PAR_TIMER_T2IN_T2IN (0x30) +#define GPIO_PAR_TIMER_T2IN_T2OUT (0x20) +#define GPIO_PAR_TIMER_T2IN_U2TXD (0x10) +#define GPIO_PAR_TIMER_T2IN_GPIO (0x00) +#define GPIO_PAR_TIMER_T1IN_MASK (0xF3) +#define GPIO_PAR_TIMER_T1IN_T1IN (0x0C) +#define GPIO_PAR_TIMER_T1IN_T1OUT (0x08) +#define GPIO_PAR_TIMER_T1IN_U2CTS (0x04) +#define GPIO_PAR_TIMER_T1IN_GPIO (0x00) +#define GPIO_PAR_TIMER_T0IN_MASK (0xFC) +#define GPIO_PAR_TIMER_T0IN_T0IN (0x03) +#define GPIO_PAR_TIMER_T0IN_T0OUT (0x02) +#define GPIO_PAR_TIMER_T0IN_U2RTS (0x01) +#define GPIO_PAR_TIMER_T0IN_GPIO (0x00) + +/* Bit definitions and macros for PAR_USB */ +#define GPIO_PAR_USB_VBUSOC(x) (((x)&0x03)) +#define GPIO_PAR_USB_VBUSEN(x) (((x)&0x03)<<2) +#define GPIO_PAR_USB_VBUSEN_MASK (0xF3) +#define GPIO_PAR_USB_VBUSEN_VBUSEN (0x0C) +#define GPIO_PAR_USB_VBUSEN_USBPULLUP (0x08) +#define GPIO_PAR_USB_VBUSEN_ULPI_NXT (0x04) +#define GPIO_PAR_USB_VBUSEN_GPIO (0x00) +#define GPIO_PAR_USB_VBUSOC_MASK (0xFC) +#define GPIO_PAR_USB_VBUSOC_VBUSOC (0x03) +#define GPIO_PAR_USB_VBUSOC_ULPI_STP (0x01) +#define GPIO_PAR_USB_VBUSOC_GPIO (0x00) + +/* Bit definitions and macros for PAR_UART */ +#define GPIO_PAR_UART_U0TXD (0x01) +#define GPIO_PAR_UART_U0RXD (0x02) +#define GPIO_PAR_UART_U0RTS (0x04) +#define GPIO_PAR_UART_U0CTS (0x08) +#define GPIO_PAR_UART_U1TXD (0x10) +#define GPIO_PAR_UART_U1RXD (0x20) +#define GPIO_PAR_UART_U1RTS (0x40) +#define GPIO_PAR_UART_U1CTS (0x80) +#define GPIO_PAR_UART_U1CTS_U1CTS (0x80) +#define GPIO_PAR_UART_U1CTS_GPIO (0x00) +#define GPIO_PAR_UART_U1RTS_U1RTS (0x40) +#define GPIO_PAR_UART_U1RTS_GPIO (0x00) +#define GPIO_PAR_UART_U1RXD_U1RXD (0x20) +#define GPIO_PAR_UART_U1RXD_GPIO (0x00) +#define GPIO_PAR_UART_U1TXD_U1TXD (0x10) +#define GPIO_PAR_UART_U1TXD_GPIO (0x00) +#define GPIO_PAR_UART_U0CTS_U0CTS (0x08) +#define GPIO_PAR_UART_U0CTS_GPIO (0x00) +#define GPIO_PAR_UART_U0RTS_U0RTS (0x04) +#define GPIO_PAR_UART_U0RTS_GPIO (0x00) +#define GPIO_PAR_UART_U0RXD_U0RXD (0x02) +#define GPIO_PAR_UART_U0RXD_GPIO (0x00) +#define GPIO_PAR_UART_U0TXD_U0TXD (0x01) +#define GPIO_PAR_UART_U0TXD_GPIO (0x00) + +/* Bit definitions and macros for PAR_FECI2C */ +#define GPIO_PAR_FECI2C_SDA(x) (((x)&0x0003)) +#define GPIO_PAR_FECI2C_SCL(x) (((x)&0x0003)<<2) +#define GPIO_PAR_FECI2C_MDIO0 (0x0010) +#define GPIO_PAR_FECI2C_MDC0 (0x0040) +#define GPIO_PAR_FECI2C_MDIO1(x) (((x)&0x0003)<<8) +#define GPIO_PAR_FECI2C_MDC1(x) (((x)&0x0003)<<10) +#define GPIO_PAR_FECI2C_MDC1_MASK (0xF3FF) +#define GPIO_PAR_FECI2C_MDC1_MDC1 (0x0C00) +#define GPIO_PAR_FECI2C_MDC1_ATA_DIOR (0x0800) +#define GPIO_PAR_FECI2C_MDC1_GPIO (0x0000) +#define GPIO_PAR_FECI2C_MDIO1_MASK (0xFCFF) +#define GPIO_PAR_FECI2C_MDIO1_MDIO1 (0x0300) +#define GPIO_PAR_FECI2C_MDIO1_ATA_DIOW (0x0200) +#define GPIO_PAR_FECI2C_MDIO1_GPIO (0x0000) +#define GPIO_PAR_FECI2C_MDC0_MDC0 (0x0040) +#define GPIO_PAR_FECI2C_MDC0_GPIO (0x0000) +#define GPIO_PAR_FECI2C_MDIO0_MDIO0 (0x0010) +#define GPIO_PAR_FECI2C_MDIO0_GPIO (0x0000) +#define GPIO_PAR_FECI2C_SCL_MASK (0xFFF3) +#define GPIO_PAR_FECI2C_SCL_SCL (0x000C) +#define GPIO_PAR_FECI2C_SCL_U2TXD (0x0004) +#define GPIO_PAR_FECI2C_SCL_GPIO (0x0000) +#define GPIO_PAR_FECI2C_SDA_MASK (0xFFFC) +#define GPIO_PAR_FECI2C_SDA_SDA (0x0003) +#define GPIO_PAR_FECI2C_SDA_U2RXD (0x0001) +#define GPIO_PAR_FECI2C_SDA_GPIO (0x0000) + +/* Bit definitions and macros for PAR_SSI */ +#define GPIO_PAR_SSI_MCLK (0x0001) +#define GPIO_PAR_SSI_STXD(x) (((x)&0x0003)<<2) +#define GPIO_PAR_SSI_SRXD(x) (((x)&0x0003)<<4) +#define GPIO_PAR_SSI_FS(x) (((x)&0x0003)<<6) +#define GPIO_PAR_SSI_BCLK(x) (((x)&0x0003)<<8) +#define GPIO_PAR_SSI_BCLK_MASK (0xFCFF) +#define GPIO_PAR_SSI_BCLK_BCLK (0x0300) +#define GPIO_PAR_SSI_BCLK_U1CTS (0x0200) +#define GPIO_PAR_SSI_BCLK_GPIO (0x0000) +#define GPIO_PAR_SSI_FS_MASK (0xFF3F) +#define GPIO_PAR_SSI_FS_FS (0x00C0) +#define GPIO_PAR_SSI_FS_U1RTS (0x0080) +#define GPIO_PAR_SSI_FS_GPIO (0x0000) +#define GPIO_PAR_SSI_SRXD_MASK (0xFFCF) +#define GPIO_PAR_SSI_SRXD_SRXD (0x0030) +#define GPIO_PAR_SSI_SRXD_U1RXD (0x0020) +#define GPIO_PAR_SSI_SRXD_GPIO (0x0000) +#define GPIO_PAR_SSI_STXD_MASK (0xFFF3) +#define GPIO_PAR_SSI_STXD_STXD (0x000C) +#define GPIO_PAR_SSI_STXD_U1TXD (0x0008) +#define GPIO_PAR_SSI_STXD_GPIO (0x0000) +#define GPIO_PAR_SSI_MCLK_MCLK (0x0001) +#define GPIO_PAR_SSI_MCLK_GPIO (0x0000) + +/* Bit definitions and macros for PAR_ATA */ +#define GPIO_PAR_ATA_IORDY (0x0001) +#define GPIO_PAR_ATA_DMARQ (0x0002) +#define GPIO_PAR_ATA_RESET (0x0004) +#define GPIO_PAR_ATA_DA0 (0x0020) +#define GPIO_PAR_ATA_DA1 (0x0040) +#define GPIO_PAR_ATA_DA2 (0x0080) +#define GPIO_PAR_ATA_CS0 (0x0100) +#define GPIO_PAR_ATA_CS1 (0x0200) +#define GPIO_PAR_ATA_BUFEN (0x0400) +#define GPIO_PAR_ATA_BUFEN_BUFEN (0x0400) +#define GPIO_PAR_ATA_BUFEN_GPIO (0x0000) +#define GPIO_PAR_ATA_CS1_CS1 (0x0200) +#define GPIO_PAR_ATA_CS1_GPIO (0x0000) +#define GPIO_PAR_ATA_CS0_CS0 (0x0100) +#define GPIO_PAR_ATA_CS0_GPIO (0x0000) +#define GPIO_PAR_ATA_DA2_DA2 (0x0080) +#define GPIO_PAR_ATA_DA2_GPIO (0x0000) +#define GPIO_PAR_ATA_DA1_DA1 (0x0040) +#define GPIO_PAR_ATA_DA1_GPIO (0x0000) +#define GPIO_PAR_ATA_DA0_DA0 (0x0020) +#define GPIO_PAR_ATA_DA0_GPIO (0x0000) +#define GPIO_PAR_ATA_RESET_RESET (0x0004) +#define GPIO_PAR_ATA_RESET_GPIO (0x0000) +#define GPIO_PAR_ATA_DMARQ_DMARQ (0x0002) +#define GPIO_PAR_ATA_DMARQ_GPIO (0x0000) +#define GPIO_PAR_ATA_IORDY_IORDY (0x0001) +#define GPIO_PAR_ATA_IORDY_GPIO (0x0000) + +/* Bit definitions and macros for PAR_IRQ */ +#define GPIO_PAR_IRQ_IRQ1 (0x02) +#define GPIO_PAR_IRQ_IRQ4 (0x10) +#define GPIO_PAR_IRQ_IRQ4_IRQ4 (0x10) +#define GPIO_PAR_IRQ_IRQ4_GPIO (0x00) +#define GPIO_PAR_IRQ_IRQ1_IRQ1 (0x02) +#define GPIO_PAR_IRQ_IRQ1_GPIO (0x00) + +/* Bit definitions and macros for PAR_PCI */ +#define GPIO_PAR_PCI_REQ0 (0x0001) +#define GPIO_PAR_PCI_REQ1 (0x0004) +#define GPIO_PAR_PCI_REQ2 (0x0010) +#define GPIO_PAR_PCI_REQ3(x) (((x)&0x0003)<<6) +#define GPIO_PAR_PCI_GNT0 (0x0100) +#define GPIO_PAR_PCI_GNT1 (0x0400) +#define GPIO_PAR_PCI_GNT2 (0x1000) +#define GPIO_PAR_PCI_GNT3(x) (((x)&0x0003)<<14) +#define GPIO_PAR_PCI_GNT3_MASK (0x3FFF) +#define GPIO_PAR_PCI_GNT3_GNT3 (0xC000) +#define GPIO_PAR_PCI_GNT3_ATA_DMACK (0x8000) +#define GPIO_PAR_PCI_GNT3_GPIO (0x0000) +#define GPIO_PAR_PCI_GNT2_GNT2 (0x1000) +#define GPIO_PAR_PCI_GNT2_GPIO (0x0000) +#define GPIO_PAR_PCI_GNT1_GNT1 (0x0400) +#define GPIO_PAR_PCI_GNT1_GPIO (0x0000) +#define GPIO_PAR_PCI_GNT0_GNT0 (0x0100) +#define GPIO_PAR_PCI_GNT0_GPIO (0x0000) +#define GPIO_PAR_PCI_REQ3_MASK (0xFF3F) +#define GPIO_PAR_PCI_REQ3_REQ3 (0x00C0) +#define GPIO_PAR_PCI_REQ3_ATA_INTRQ (0x0080) +#define GPIO_PAR_PCI_REQ3_GPIO (0x0000) +#define GPIO_PAR_PCI_REQ2_REQ2 (0x0010) +#define GPIO_PAR_PCI_REQ2_GPIO (0x0000) +#define GPIO_PAR_PCI_REQ1_REQ1 (0x0040) +#define GPIO_PAR_PCI_REQ1_GPIO (0x0000) +#define GPIO_PAR_PCI_REQ0_REQ0 (0x0001) +#define GPIO_PAR_PCI_REQ0_GPIO (0x0000) + +/* Bit definitions and macros for MSCR_SDRAM */ +#define GPIO_MSCR_SDRAM_SDCTL(x) (((x)&0x03)) +#define GPIO_MSCR_SDRAM_SDCLK(x) (((x)&0x03)<<2) +#define GPIO_MSCR_SDRAM_SDDQS(x) (((x)&0x03)<<4) +#define GPIO_MSCR_SDRAM_SDDATA(x) (((x)&0x03)<<6) +#define GPIO_MSCR_SDRAM_SDDATA_MASK (0x3F) +#define GPIO_MSCR_SDRAM_SDDATA_DDR1 (0xC0) +#define GPIO_MSCR_SDRAM_SDDATA_DDR2 (0x80) +#define GPIO_MSCR_SDRAM_SDDATA_FS_LPDDR (0x40) +#define GPIO_MSCR_SDRAM_SDDATA_HS_LPDDR (0x00) +#define GPIO_MSCR_SDRAM_SDDQS_MASK (0xCF) +#define GPIO_MSCR_SDRAM_SDDQS_DDR1 (0x30) +#define GPIO_MSCR_SDRAM_SDDQS_DDR2 (0x20) +#define GPIO_MSCR_SDRAM_SDDQS_FS_LPDDR (0x10) +#define GPIO_MSCR_SDRAM_SDDQS_HS_LPDDR (0x00) +#define GPIO_MSCR_SDRAM_SDCLK_MASK (0xF3) +#define GPIO_MSCR_SDRAM_SDCLK_DDR1 (0x0C) +#define GPIO_MSCR_SDRAM_SDCLK_DDR2 (0x08) +#define GPIO_MSCR_SDRAM_SDCLK_FS_LPDDR (0x04) +#define GPIO_MSCR_SDRAM_SDCLK_HS_LPDDR (0x00) +#define GPIO_MSCR_SDRAM_SDCTL_MASK (0xFC) +#define GPIO_MSCR_SDRAM_SDCTL_DDR1 (0x03) +#define GPIO_MSCR_SDRAM_SDCTL_DDR2 (0x02) +#define GPIO_MSCR_SDRAM_SDCTL_FS_LPDDR (0x01) +#define GPIO_MSCR_SDRAM_SDCTL_HS_LPDDR (0x00) + +/* Bit definitions and macros for MSCR_PCI */ +#define GPIO_MSCR_PCI_PCI (0x01) +#define GPIO_MSCR_PCI_PCI_HI_66MHZ (0x01) +#define GPIO_MSCR_PCI_PCI_LO_33MHZ (0x00) + +/* Bit definitions and macros for DSCR_I2C */ +#define GPIO_DSCR_I2C_I2C(x) (((x)&0x03)) +#define GPIO_DSCR_I2C_I2C_LOAD_50PF (0x03) +#define GPIO_DSCR_I2C_I2C_LOAD_30PF (0x02) +#define GPIO_DSCR_I2C_I2C_LOAD_20PF (0x01) +#define GPIO_DSCR_I2C_I2C_LOAD_10PF (0x00) + +/* Bit definitions and macros for DSCR_FLEXBUS */ +#define GPIO_DSCR_FLEXBUS_FBADL(x) (((x)&0x03)) +#define GPIO_DSCR_FLEXBUS_FBADH(x) (((x)&0x03)<<2) +#define GPIO_DSCR_FLEXBUS_FBCTL(x) (((x)&0x03)<<4) +#define GPIO_DSCR_FLEXBUS_FBCLK(x) (((x)&0x03)<<6) +#define GPIO_DSCR_FLEXBUS_FBCLK_LOAD_50PF (0xC0) +#define GPIO_DSCR_FLEXBUS_FBCLK_LOAD_30PF (0x80) +#define GPIO_DSCR_FLEXBUS_FBCLK_LOAD_20PF (0x40) +#define GPIO_DSCR_FLEXBUS_FBCLK_LOAD_10PF (0x00) +#define GPIO_DSCR_FLEXBUS_FBCTL_LOAD_50PF (0x30) +#define GPIO_DSCR_FLEXBUS_FBCTL_LOAD_30PF (0x20) +#define GPIO_DSCR_FLEXBUS_FBCTL_LOAD_20PF (0x10) +#define GPIO_DSCR_FLEXBUS_FBCTL_LOAD_10PF (0x00) +#define GPIO_DSCR_FLEXBUS_FBADH_LOAD_50PF (0x0C) +#define GPIO_DSCR_FLEXBUS_FBADH_LOAD_30PF (0x08) +#define GPIO_DSCR_FLEXBUS_FBADH_LOAD_20PF (0x04) +#define GPIO_DSCR_FLEXBUS_FBADH_LOAD_10PF (0x00) +#define GPIO_DSCR_FLEXBUS_FBADL_LOAD_50PF (0x03) +#define GPIO_DSCR_FLEXBUS_FBADL_LOAD_30PF (0x02) +#define GPIO_DSCR_FLEXBUS_FBADL_LOAD_20PF (0x01) +#define GPIO_DSCR_FLEXBUS_FBADL_LOAD_10PF (0x00) + +/* Bit definitions and macros for DSCR_FEC */ +#define GPIO_DSCR_FEC_FEC0(x) (((x)&0x03)) +#define GPIO_DSCR_FEC_FEC1(x) (((x)&0x03)<<2) +#define GPIO_DSCR_FEC_FEC1_LOAD_50PF (0x0C) +#define GPIO_DSCR_FEC_FEC1_LOAD_30PF (0x08) +#define GPIO_DSCR_FEC_FEC1_LOAD_20PF (0x04) +#define GPIO_DSCR_FEC_FEC1_LOAD_10PF (0x00) +#define GPIO_DSCR_FEC_FEC0_LOAD_50PF (0x03) +#define GPIO_DSCR_FEC_FEC0_LOAD_30PF (0x02) +#define GPIO_DSCR_FEC_FEC0_LOAD_20PF (0x01) +#define GPIO_DSCR_FEC_FEC0_LOAD_10PF (0x00) + +/* Bit definitions and macros for DSCR_UART */ +#define GPIO_DSCR_UART_UART0(x) (((x)&0x03)) +#define GPIO_DSCR_UART_UART1(x) (((x)&0x03)<<2) +#define GPIO_DSCR_UART_UART1_LOAD_50PF (0x0C) +#define GPIO_DSCR_UART_UART1_LOAD_30PF (0x08) +#define GPIO_DSCR_UART_UART1_LOAD_20PF (0x04) +#define GPIO_DSCR_UART_UART1_LOAD_10PF (0x00) +#define GPIO_DSCR_UART_UART0_LOAD_50PF (0x03) +#define GPIO_DSCR_UART_UART0_LOAD_30PF (0x02) +#define GPIO_DSCR_UART_UART0_LOAD_20PF (0x01) +#define GPIO_DSCR_UART_UART0_LOAD_10PF (0x00) + +/* Bit definitions and macros for DSCR_DSPI */ +#define GPIO_DSCR_DSPI_DSPI(x) (((x)&0x03)) +#define GPIO_DSCR_DSPI_DSPI_LOAD_50PF (0x03) +#define GPIO_DSCR_DSPI_DSPI_LOAD_30PF (0x02) +#define GPIO_DSCR_DSPI_DSPI_LOAD_20PF (0x01) +#define GPIO_DSCR_DSPI_DSPI_LOAD_10PF (0x00) + +/* Bit definitions and macros for DSCR_TIMER */ +#define GPIO_DSCR_TIMER_TIMER(x) (((x)&0x03)) +#define GPIO_DSCR_TIMER_TIMER_LOAD_50PF (0x03) +#define GPIO_DSCR_TIMER_TIMER_LOAD_30PF (0x02) +#define GPIO_DSCR_TIMER_TIMER_LOAD_20PF (0x01) +#define GPIO_DSCR_TIMER_TIMER_LOAD_10PF (0x00) + +/* Bit definitions and macros for DSCR_SSI */ +#define GPIO_DSCR_SSI_SSI(x) (((x)&0x03)) +#define GPIO_DSCR_SSI_SSI_LOAD_50PF (0x03) +#define GPIO_DSCR_SSI_SSI_LOAD_30PF (0x02) +#define GPIO_DSCR_SSI_SSI_LOAD_20PF (0x01) +#define GPIO_DSCR_SSI_SSI_LOAD_10PF (0x00) + +/* Bit definitions and macros for DSCR_DMA */ +#define GPIO_DSCR_DMA_DMA(x) (((x)&0x03)) +#define GPIO_DSCR_DMA_DMA_LOAD_50PF (0x03) +#define GPIO_DSCR_DMA_DMA_LOAD_30PF (0x02) +#define GPIO_DSCR_DMA_DMA_LOAD_20PF (0x01) +#define GPIO_DSCR_DMA_DMA_LOAD_10PF (0x00) + +/* Bit definitions and macros for DSCR_DEBUG */ +#define GPIO_DSCR_DEBUG_DEBUG(x) (((x)&0x03)) +#define GPIO_DSCR_DEBUG_DEBUG_LOAD_50PF (0x03) +#define GPIO_DSCR_DEBUG_DEBUG_LOAD_30PF (0x02) +#define GPIO_DSCR_DEBUG_DEBUG_LOAD_20PF (0x01) +#define GPIO_DSCR_DEBUG_DEBUG_LOAD_10PF (0x00) + +/* Bit definitions and macros for DSCR_RESET */ +#define GPIO_DSCR_RESET_RESET(x) (((x)&0x03)) +#define GPIO_DSCR_RESET_RESET_LOAD_50PF (0x03) +#define GPIO_DSCR_RESET_RESET_LOAD_30PF (0x02) +#define GPIO_DSCR_RESET_RESET_LOAD_20PF (0x01) +#define GPIO_DSCR_RESET_RESET_LOAD_10PF (0x00) + +/* Bit definitions and macros for DSCR_IRQ */ +#define GPIO_DSCR_IRQ_IRQ(x) (((x)&0x03)) +#define GPIO_DSCR_IRQ_IRQ_LOAD_50PF (0x03) +#define GPIO_DSCR_IRQ_IRQ_LOAD_30PF (0x02) +#define GPIO_DSCR_IRQ_IRQ_LOAD_20PF (0x01) +#define GPIO_DSCR_IRQ_IRQ_LOAD_10PF (0x00) + +/* Bit definitions and macros for DSCR_USB */ +#define GPIO_DSCR_USB_USB(x) (((x)&0x03)) +#define GPIO_DSCR_USB_USB_LOAD_50PF (0x03) +#define GPIO_DSCR_USB_USB_LOAD_30PF (0x02) +#define GPIO_DSCR_USB_USB_LOAD_20PF (0x01) +#define GPIO_DSCR_USB_USB_LOAD_10PF (0x00) + +/* Bit definitions and macros for DSCR_ATA */ +#define GPIO_DSCR_ATA_ATA(x) (((x)&0x03)) +#define GPIO_DSCR_ATA_ATA_LOAD_50PF (0x03) +#define GPIO_DSCR_ATA_ATA_LOAD_30PF (0x02) +#define GPIO_DSCR_ATA_ATA_LOAD_20PF (0x01) +#define GPIO_DSCR_ATA_ATA_LOAD_10PF (0x00) + +/********************************************************************* +* Random Number Generator (RNG) +*********************************************************************/ + +/* Bit definitions and macros for RNGCR */ +#define RNG_RNGCR_GO (0x00000001) +#define RNG_RNGCR_HA (0x00000002) +#define RNG_RNGCR_IM (0x00000004) +#define RNG_RNGCR_CI (0x00000008) + +/* Bit definitions and macros for RNGSR */ +#define RNG_RNGSR_SV (0x00000001) +#define RNG_RNGSR_LRS (0x00000002) +#define RNG_RNGSR_FUF (0x00000004) +#define RNG_RNGSR_EI (0x00000008) +#define RNG_RNGSR_OFL(x) (((x)&0x000000FF)<<8) +#define RNG_RNGSR_OFS(x) (((x)&0x000000FF)<<16) + +/********************************************************************* +* SDRAM Controller (SDRAMC) +*********************************************************************/ + +/* Bit definitions and macros for SDMR */ +#define SDRAMC_SDMR_DDR2_AD(x) (((x)&0x00003FFF)) /* Address for DDR2 */ +#define SDRAMC_SDMR_CMD (0x00010000) /* Command */ +#define SDRAMC_SDMR_AD(x) (((x)&0x00000FFF)<<18) /* Address */ +#define SDRAMC_SDMR_BK(x) (((x)&0x00000003)<<30) /* Bank Address */ +#define SDRAMC_SDMR_BK_LMR (0x00000000) +#define SDRAMC_SDMR_BK_LEMR (0x40000000) + +/* Bit definitions and macros for SDCR */ +#define SDRAMC_SDCR_DPD (0x00000001) /* Deep Power-Down Mode */ +#define SDRAMC_SDCR_IPALL (0x00000002) /* Initiate Precharge All */ +#define SDRAMC_SDCR_IREF (0x00000004) /* Initiate Refresh */ +#define SDRAMC_SDCR_DQS_OE(x) (((x)&0x00000003)<<10) /* DQS Output Enable */ +#define SDRAMC_SDCR_MEM_PS (0x00002000) /* Data Port Size */ +#define SDRAMC_SDCR_REF_CNT(x) (((x)&0x0000003F)<<16) /* Periodic Refresh Counter */ +#define SDRAMC_SDCR_OE_RULE (0x00400000) /* Drive Rule Selection */ +#define SDRAMC_SDCR_ADDR_MUX(x) (((x)&0x00000003)<<24) /* Internal Address Mux Select */ +#define SDRAMC_SDCR_DDR2_MODE (0x08000000) /* DDR2 Mode Select */ +#define SDRAMC_SDCR_REF_EN (0x10000000) /* Refresh Enable */ +#define SDRAMC_SDCR_DDR_MODE (0x20000000) /* DDR Mode Select */ +#define SDRAMC_SDCR_CKE (0x40000000) /* Clock Enable */ +#define SDRAMC_SDCR_MODE_EN (0x80000000) /* SDRAM Mode Register Programming Enable */ +#define SDRAMC_SDCR_DQS_OE_BOTH (0x00000C000) + +/* Bit definitions and macros for SDCFG1 */ +#define SDRAMC_SDCFG1_WT_LAT(x) (((x)&0x00000007)<<4) /* Write Latency */ +#define SDRAMC_SDCFG1_REF2ACT(x) (((x)&0x0000000F)<<8) /* Refresh to active delay */ +#define SDRAMC_SDCFG1_PRE2ACT(x) (((x)&0x00000007)<<12) /* Precharge to active delay */ +#define SDRAMC_SDCFG1_ACT2RW(x) (((x)&0x00000007)<<16) /* Active to read/write delay */ +#define SDRAMC_SDCFG1_RD_LAT(x) (((x)&0x0000000F)<<20) /* Read CAS Latency */ +#define SDRAMC_SDCFG1_SWT2RWP(x) (((x)&0x00000007)<<24) /* Single write to read/write/precharge delay */ +#define SDRAMC_SDCFG1_SRD2RWP(x) (((x)&0x0000000F)<<28) /* Single read to read/write/precharge delay */ + +/* Bit definitions and macros for SDCFG2 */ +#define SDRAMC_SDCFG2_BL(x) (((x)&0x0000000F)<<16) /* Burst Length */ +#define SDRAMC_SDCFG2_BRD2W(x) (((x)&0x0000000F)<<20) /* Burst read to write delay */ +#define SDRAMC_SDCFG2_BWT2RWP(x) (((x)&0x0000000F)<<24) /* Burst write to read/write/precharge delay */ +#define SDRAMC_SDCFG2_BRD2RP(x) (((x)&0x0000000F)<<28) /* Burst read to read/precharge delay */ + +/* Bit definitions and macros for SDCS group */ +#define SDRAMC_SDCS_CSSZ(x) (((x)&0x0000001F)) /* Chip-Select Size */ +#define SDRAMC_SDCS_CSBA(x) (((x)&0x00000FFF)<<20) /* Chip-Select Base Address */ +#define SDRAMC_SDCS_BA(x) ((x)&0xFFF00000) +#define SDRAMC_SDCS_CSSZ_DISABLE (0x00000000) +#define SDRAMC_SDCS_CSSZ_1MBYTE (0x00000013) +#define SDRAMC_SDCS_CSSZ_2MBYTE (0x00000014) +#define SDRAMC_SDCS_CSSZ_4MBYTE (0x00000015) +#define SDRAMC_SDCS_CSSZ_8MBYTE (0x00000016) +#define SDRAMC_SDCS_CSSZ_16MBYTE (0x00000017) +#define SDRAMC_SDCS_CSSZ_32MBYTE (0x00000018) +#define SDRAMC_SDCS_CSSZ_64MBYTE (0x00000019) +#define SDRAMC_SDCS_CSSZ_128MBYTE (0x0000001A) +#define SDRAMC_SDCS_CSSZ_256MBYTE (0x0000001B) +#define SDRAMC_SDCS_CSSZ_512MBYTE (0x0000001C) +#define SDRAMC_SDCS_CSSZ_1GBYTE (0x0000001D) +#define SDRAMC_SDCS_CSSZ_2GBYTE (0x0000001E) +#define SDRAMC_SDCS_CSSZ_4GBYTE (0x0000001F) + +/********************************************************************* +* Synchronous Serial Interface (SSI) +*********************************************************************/ + +/* Bit definitions and macros for CR */ +#define SSI_CR_SSI_EN (0x00000001) +#define SSI_CR_TE (0x00000002) +#define SSI_CR_RE (0x00000004) +#define SSI_CR_NET (0x00000008) +#define SSI_CR_SYN (0x00000010) +#define SSI_CR_I2S(x) (((x)&0x00000003)<<5) +#define SSI_CR_MCE (0x00000080) +#define SSI_CR_TCH (0x00000100) +#define SSI_CR_CIS (0x00000200) +#define SSI_CR_I2S_NORMAL (0x00000000) +#define SSI_CR_I2S_MASTER (0x00000020) +#define SSI_CR_I2S_SLAVE (0x00000040) + +/* Bit definitions and macros for ISR */ +#define SSI_ISR_TFE0 (0x00000001) +#define SSI_ISR_TFE1 (0x00000002) +#define SSI_ISR_RFF0 (0x00000004) +#define SSI_ISR_RFF1 (0x00000008) +#define SSI_ISR_RLS (0x00000010) +#define SSI_ISR_TLS (0x00000020) +#define SSI_ISR_RFS (0x00000040) +#define SSI_ISR_TFS (0x00000080) +#define SSI_ISR_TUE0 (0x00000100) +#define SSI_ISR_TUE1 (0x00000200) +#define SSI_ISR_ROE0 (0x00000400) +#define SSI_ISR_ROE1 (0x00000800) +#define SSI_ISR_TDE0 (0x00001000) +#define SSI_ISR_TDE1 (0x00002000) +#define SSI_ISR_RDR0 (0x00004000) +#define SSI_ISR_RDR1 (0x00008000) +#define SSI_ISR_RXT (0x00010000) +#define SSI_ISR_CMDDU (0x00020000) +#define SSI_ISR_CMDAU (0x00040000) + +/* Bit definitions and macros for IER */ +#define SSI_IER_TFE0 (0x00000001) +#define SSI_IER_TFE1 (0x00000002) +#define SSI_IER_RFF0 (0x00000004) +#define SSI_IER_RFF1 (0x00000008) +#define SSI_IER_RLS (0x00000010) +#define SSI_IER_TLS (0x00000020) +#define SSI_IER_RFS (0x00000040) +#define SSI_IER_TFS (0x00000080) +#define SSI_IER_TUE0 (0x00000100) +#define SSI_IER_TUE1 (0x00000200) +#define SSI_IER_ROE0 (0x00000400) +#define SSI_IER_ROE1 (0x00000800) +#define SSI_IER_TDE0 (0x00001000) +#define SSI_IER_TDE1 (0x00002000) +#define SSI_IER_RDR0 (0x00004000) +#define SSI_IER_RDR1 (0x00008000) +#define SSI_IER_RXT (0x00010000) +#define SSI_IER_CMDU (0x00020000) +#define SSI_IER_CMDAU (0x00040000) +#define SSI_IER_TIE (0x00080000) +#define SSI_IER_TDMAE (0x00100000) +#define SSI_IER_RIE (0x00200000) +#define SSI_IER_RDMAE (0x00400000) + +/* Bit definitions and macros for TCR */ +#define SSI_TCR_TEFS (0x00000001) +#define SSI_TCR_TFSL (0x00000002) +#define SSI_TCR_TFSI (0x00000004) +#define SSI_TCR_TSCKP (0x00000008) +#define SSI_TCR_TSHFD (0x00000010) +#define SSI_TCR_TXDIR (0x00000020) +#define SSI_TCR_TFDIR (0x00000040) +#define SSI_TCR_TFEN0 (0x00000080) +#define SSI_TCR_TFEN1 (0x00000100) +#define SSI_TCR_TXBIT0 (0x00000200) + +/* Bit definitions and macros for RCR */ +#define SSI_RCR_REFS (0x00000001) +#define SSI_RCR_RFSL (0x00000002) +#define SSI_RCR_RFSI (0x00000004) +#define SSI_RCR_RSCKP (0x00000008) +#define SSI_RCR_RSHFD (0x00000010) +#define SSI_RCR_RFEN0 (0x00000080) +#define SSI_RCR_RFEN1 (0x00000100) +#define SSI_RCR_RXBIT0 (0x00000200) +#define SSI_RCR_RXEXT (0x00000400) + +/* Bit definitions and macros for CCR */ +#define SSI_CCR_PM(x) (((x)&0x000000FF)) +#define SSI_CCR_DC(x) (((x)&0x0000001F)<<8) +#define SSI_CCR_WL(x) (((x)&0x0000000F)<<13) +#define SSI_CCR_PSR (0x00020000) +#define SSI_CCR_DIV2 (0x00040000) + +/* Bit definitions and macros for FCSR */ +#define SSI_FCSR_TFWM0(x) (((x)&0x0000000F)) +#define SSI_FCSR_RFWM0(x) (((x)&0x0000000F)<<4) +#define SSI_FCSR_TFCNT0(x) (((x)&0x0000000F)<<8) +#define SSI_FCSR_RFCNT0(x) (((x)&0x0000000F)<<12) +#define SSI_FCSR_TFWM1(x) (((x)&0x0000000F)<<16) +#define SSI_FCSR_RFWM1(x) (((x)&0x0000000F)<<20) +#define SSI_FCSR_TFCNT1(x) (((x)&0x0000000F)<<24) +#define SSI_FCSR_RFCNT1(x) (((x)&0x0000000F)<<28) + +/* Bit definitions and macros for ACR */ +#define SSI_ACR_AC97EN (0x00000001) +#define SSI_ACR_FV (0x00000002) +#define SSI_ACR_TIF (0x00000004) +#define SSI_ACR_RD (0x00000008) +#define SSI_ACR_WR (0x00000010) +#define SSI_ACR_FRDIV(x) (((x)&0x0000003F)<<5) + +/* Bit definitions and macros for ACADD */ +#define SSI_ACADD_SSI_ACADD(x) (((x)&0x0007FFFF)) + +/* Bit definitions and macros for ACDAT */ +#define SSI_ACDAT_SSI_ACDAT(x) (((x)&0x0007FFFF)) + +/* Bit definitions and macros for ATAG */ +#define SSI_ATAG_DDI_ATAG(x) (((x)&0x0000FFFF)) + +/********************************************************************* +* Phase Locked Loop (PLL) +*********************************************************************/ + +/* Bit definitions and macros for PCR */ +#define PLL_PCR_OUTDIV1(x) (((x)&0x0000000F)) /* Output divider for CPU clock frequency */ +#define PLL_PCR_OUTDIV2(x) (((x)&0x0000000F)<<4) /* Output divider for internal bus clock frequency */ +#define PLL_PCR_OUTDIV3(x) (((x)&0x0000000F)<<8) /* Output divider for Flexbus clock frequency */ +#define PLL_PCR_OUTDIV4(x) (((x)&0x0000000F)<<12) /* Output divider for PCI clock frequency */ +#define PLL_PCR_OUTDIV5(x) (((x)&0x0000000F)<<16) /* Output divider for USB clock frequency */ +#define PLL_PCR_PFDR(x) (((x)&0x000000FF)<<24) /* Feedback divider for VCO frequency */ +#define PLL_PCR_PFDR_MASK (0x000F0000) +#define PLL_PCR_OUTDIV5_MASK (0x000F0000) +#define PLL_PCR_OUTDIV4_MASK (0x0000F000) +#define PLL_PCR_OUTDIV3_MASK (0x00000F00) +#define PLL_PCR_OUTDIV2_MASK (0x000000F0) +#define PLL_PCR_OUTDIV1_MASK (0x0000000F) + +/* Bit definitions and macros for PSR */ +#define PLL_PSR_LOCKS (0x00000001) /* PLL lost lock - sticky */ +#define PLL_PSR_LOCK (0x00000002) /* PLL lock status */ +#define PLL_PSR_LOLIRQ (0x00000004) /* PLL loss-of-lock interrupt enable */ +#define PLL_PSR_LOLRE (0x00000008) /* PLL loss-of-lock reset enable */ + +/********************************************************************* +* PCI +*********************************************************************/ + +/* Bit definitions and macros for SCR */ +#define PCI_SCR_PE (0x80000000) /* Parity Error detected */ +#define PCI_SCR_SE (0x40000000) /* System error signalled */ +#define PCI_SCR_MA (0x20000000) /* Master aboart received */ +#define PCI_SCR_TR (0x10000000) /* Target abort received */ +#define PCI_SCR_TS (0x08000000) /* Target abort signalled */ +#define PCI_SCR_DT (0x06000000) /* PCI_DEVSEL timing */ +#define PCI_SCR_DP (0x01000000) /* Master data parity err */ +#define PCI_SCR_FC (0x00800000) /* Fast back-to-back */ +#define PCI_SCR_R (0x00400000) /* Reserved */ +#define PCI_SCR_66M (0x00200000) /* 66Mhz */ +#define PCI_SCR_C (0x00100000) /* Capabilities list */ +#define PCI_SCR_F (0x00000200) /* Fast back-to-back enable */ +#define PCI_SCR_S (0x00000100) /* SERR enable */ +#define PCI_SCR_ST (0x00000080) /* Addr and Data stepping */ +#define PCI_SCR_PER (0x00000040) /* Parity error response */ +#define PCI_SCR_V (0x00000020) /* VGA palette snoop enable */ +#define PCI_SCR_MW (0x00000010) /* Memory write and invalidate enable */ +#define PCI_SCR_SP (0x00000008) /* Special cycle monitor or ignore */ +#define PCI_SCR_B (0x00000004) /* Bus master enable */ +#define PCI_SCR_M (0x00000002) /* Memory access control */ +#define PCI_SCR_IO (0x00000001) /* I/O access control */ + +#define PCI_CR1_BIST(x) ((x & 0xFF) << 24) /* Built in self test */ +#define PCI_CR1_HDR(x) ((x & 0xFF) << 16) /* Header type */ +#define PCI_CR1_LTMR(x) ((x & 0xF8) << 8) /* Latency timer */ +#define PCI_CR1_CLS(x) (x & 0x0F) /* Cache line size */ + +#define PCI_BAR_BAR0(x) (x & 0xFFFC0000) +#define PCI_BAR_BAR1(x) (x & 0xFFF00000) +#define PCI_BAR_BAR2(x) (x & 0xFFC00000) +#define PCI_BAR_BAR3(x) (x & 0xFF000000) +#define PCI_BAR_BAR4(x) (x & 0xF8000000) +#define PCI_BAR_BAR5(x) (x & 0xE0000000) +#define PCI_BAR_PREF (0x00000004) /* Prefetchable access */ +#define PCI_BAR_RANGE (0x00000002) /* Fixed to 00 */ +#define PCI_BAR_IO_M (0x00000001) /* IO / memory space */ + +#define PCI_CR2_MAXLAT(x) ((x & 0xFF) << 24) /* Maximum latency */ +#define PCI_CR2_MINGNT(x) ((x & 0xFF) << 16) /* Minimum grant */ +#define PCI_CR2_INTPIN(x) ((x & 0xFF) << 8) /* Interrupt Pin */ +#define PCI_CR2_INTLIN(x) (x & 0xFF) /* Interrupt Line */ + +#define PCI_GSCR_DRD (0x80000000) /* Delayed read discarded */ +#define PCI_GSCR_PE (0x20000000) /* PCI_PERR detected */ +#define PCI_GSCR_SE (0x10000000) /* SERR detected */ +#define PCI_GSCR_ER (0x08000000) /* Error response detected */ +#define PCI_GSCR_DRDE (0x00008000) /* Delayed read discarded enable */ +#define PCI_GSCR_PEE (0x00002000) /* PERR detected interrupt enable */ +#define PCI_GSCR_SEE (0x00001000) /* SERR detected interrupt enable */ +#define PCI_GSCR_PR (0x00000001) /* PCI reset */ + +#define PCI_TCR1_LD (0x01000000) /* Latency rule disable */ +#define PCI_TCR1_PID (0x00020000) /* Prefetch invalidate and disable */ +#define PCI_TCR1_P (0x00010000) /* Prefetch reads */ +#define PCI_TCR1_WCD (0x00000100) /* Write combine disable */ + +#define PCI_TCR1_B5E (0x00002000) /* */ +#define PCI_TCR1_B4E (0x00001000) /* */ +#define PCI_TCR1_B3E (0x00000800) /* */ +#define PCI_TCR1_B2E (0x00000400) /* */ +#define PCI_TCR1_B1E (0x00000200) /* */ +#define PCI_TCR1_B0E (0x00000100) /* */ +#define PCI_TCR1_CR (0x00000001) /* */ + +#define PCI_TBATR_BAT(x) ((x & 0xFFF) << 20) +#define PCI_TBATR_EN (0x00000001) /* Enable */ + +#define PCI_IWCR_W0C_IO (0x08000000) /* Windows Maps to PCI I/O */ +#define PCI_IWCR_W0C_PRC_RDMUL (0x04000000) /* PCI Memory Read multiple */ +#define PCI_IWCR_W0C_PRC_RDLN (0x02000000) /* PCI Memory Read line */ +#define PCI_IWCR_W0C_PRC_RD (0x00000000) /* PCI Memory Read */ +#define PCI_IWCR_W0C_EN (0x01000000) /* Enable - Register initialize */ +#define PCI_IWCR_W1C_IO (0x00080000) /* Windows Maps to PCI I/O */ +#define PCI_IWCR_W1C_PRC_RDMUL (0x00040000) /* PCI Memory Read multiple */ +#define PCI_IWCR_W1C_PRC_RDLN (0x00020000) /* PCI Memory Read line */ +#define PCI_IWCR_W1C_PRC_RD (0x00000000) /* PCI Memory Read */ +#define PCI_IWCR_W1C_EN (0x00010000) /* Enable - Register initialize */ +#define PCI_IWCR_W2C_IO (0x00000800) /* Windows Maps to PCI I/O */ +#define PCI_IWCR_W2C_PRC_RDMUL (0x00000400) /* PCI Memory Read multiple */ +#define PCI_IWCR_W2C_PRC_RDLN (0x00000200) /* PCI Memory Read line */ +#define PCI_IWCR_W2C_PRC_RD (0x00000000) /* PCI Memory Read */ +#define PCI_IWCR_W2C_EN (0x00000100) /* Enable - Register initialize */ + +#define PCI_ICR_REE (0x04000000) /* Retry error enable */ +#define PCI_ICR_IAE (0x02000000) /* Initiator abort enable */ +#define PCI_ICR_TAE (0x01000000) /* Target abort enable */ + +#define PCI_IDR_DEVID ( + +/********************************************************************/ + +#endif /* __MCF5445X__ */ diff --git a/include/asm-m68k/rtc.h b/include/asm-m68k/rtc.h index f955bc5fe14..7651ca93258 100644 --- a/include/asm-m68k/rtc.h +++ b/include/asm-m68k/rtc.h @@ -35,9 +35,10 @@ typedef struct rtc_ctrl { u32 cr; /* 0x10 Control Register */ u32 isr; /* 0x14 Interrupt Status Register */ u32 ier; /* 0x18 Interrupt Enable Register */ - u32 stpwach; /* 0x1C Stopwatch Minutes Register */ + u32 stpwatch; /* 0x1C Stopwatch Minutes Register */ u32 days; /* 0x20 Days Counter Register */ u32 alrm_day; /* 0x24 Days Alarm Register */ + void *extended; } rtc_t; /* Bit definitions and macros for HOURMIN */ diff --git a/include/asm-m68k/u-boot.h b/include/asm-m68k/u-boot.h index 70dbda464c0..93a6959ff14 100644 --- a/include/asm-m68k/u-boot.h +++ b/include/asm-m68k/u-boot.h @@ -52,6 +52,14 @@ typedef struct bd_info { unsigned short bi_ethspeed; /* Ethernet speed in Mbps */ unsigned long bi_intfreq; /* Internal Freq, in MHz */ unsigned long bi_busfreq; /* Bus Freq, in MHz */ +#ifdef CONFIG_PCI + unsigned long bi_pcifreq; /* pci Freq in MHz */ +#endif +#ifdef CONFIG_EXTRA_CLOCK + unsigned long bi_inpfreq; /* input Freq in MHz */ + unsigned long bi_vcofreq; /* vco Freq in MHz */ + unsigned long bi_flbfreq; /* Flexbus Freq in MHz */ +#endif unsigned long bi_baudrate; /* Console Baudrate */ #ifdef CONFIG_HAS_ETH1 diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h new file mode 100644 index 00000000000..6f4859c2380 --- /dev/null +++ b/include/configs/M54455EVB.h @@ -0,0 +1,391 @@ +/* + * Configuation settings for the Freescale MCF54455 EVB board. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef _JAMICA54455_H +#define _JAMICA54455_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_MCF5445x /* define processor family */ +#define CONFIG_M54455 /* define processor type */ +#define CONFIG_M54455EVB /* M54455EVB board */ + +#undef DEBUG + +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } + +#undef CONFIG_WATCHDOG + +#define CONFIG_TIMESTAMP /* Print image info with timestamp */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* Command line configuration */ +#include + +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO + +#undef CONFIG_CMD_LOADB +#undef CONFIG_CMD_LOADS + +/* Network configuration */ +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_MULTI 1 +# define CONFIG_MII 1 +# define CONFIG_CF_DOMII +# define CFG_DISCOVER_PHY +# define CFG_RX_ETH_BUFFER 8 +# define CFG_FAULT_ECHO_LINK_DOWN + +# define CFG_FEC0_PINMUX 0 +# define CFG_FEC1_PINMUX 0 +# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +# define CFG_FEC1_MIIBASE CFG_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 +# define CONFIG_HAS_ETH1 + +# define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ +# define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)" +# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 +# define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61 +# define CONFIG_ETHPRIME "FEC0" +# define CONFIG_IPADDR 192.162.1.2 +# define CONFIG_NETMASK 255.255.255.0 +# define CONFIG_SERVERIP 192.162.1.1 +# define CONFIG_GATEWAYIP 192.162.1.1 +# define CONFIG_OVERWRITE_ETHADDR_ONCE + +/* If CFG_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CFG_DISCOVER_PHY +# define FECDUPLEX FULL +# define FECSPEED _100BASET +# else +# ifndef CFG_FAULT_ECHO_LINK_DOWN +# define CFG_FAULT_ECHO_LINK_DOWN +# endif +# endif /* CFG_DISCOVER_PHY */ +#endif + +#define CONFIG_HOSTNAME M54455EVB +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "inpclk=" MK_STR(CFG_INPUT_CLKSRC) "\0" \ + "loadaddr=40010000\0" \ + "u-boot=u-boot.bin\0" \ + "load=tftp ${loadaddr) ${u-boot}\0" \ + "upd=run load; run prog\0" \ + "prog=prot off 0 2ffff;" \ + "era 0 2ffff;" \ + "cp.b ${loadaddr} 0 ${filesize};" \ + "save\0" \ + "" + +/* ATA configuration */ +#define CONFIG_ISO_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_IDE_RESET 1 +#define CONFIG_IDE_PREINIT 1 +#define CONFIG_ATAPI +#undef CONFIG_LBA48 + +#define CFG_IDE_MAXBUS 1 +#define CFG_IDE_MAXDEVICE 2 + +#define CFG_ATA_BASE_ADDR 0x90000000 +#define CFG_ATA_IDE0_OFFSET 0 + +#define CFG_ATA_DATA_OFFSET 0xA0 /* Offset for data I/O */ +#define CFG_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */ +#define CFG_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */ +#define CFG_ATA_STRIDE 4 /* Interval between registers */ +#define _IO_BASE 0 + +/* Realtime clock */ +#define CONFIG_MCFRTC +#undef RTC_DEBUG +#define CFG_RTC_OSCILLATOR (32 * CFG_HZ) + +/* Timer */ +#define CONFIG_MCFTMR +#undef CONFIG_MCFPIT + +/* I2c */ +#define CONFIG_FSL_I2C +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 80000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_OFFSET 0x58000 +#define CFG_IMMR CFG_MBAR + +/* PCI */ +#define CONFIG_PCI 1 + +#define CFG_PCI_MEM_BUS 0xA0000000 +#define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BUS +#define CFG_PCI_MEM_SIZE 0x10000000 + +#define CFG_PCI_IO_BUS 0xB1000000 +#define CFG_PCI_IO_PHYS CFG_PCI_IO_BUS +#define CFG_PCI_IO_SIZE 0x01000000 + +#define CFG_PCI_CFG_BUS 0xB0000000 +#define CFG_PCI_CFG_PHYS CFG_PCI_CFG_BUS +#define CFG_PCI_CFG_SIZE 0x01000000 + +/* FPGA - Spartan 2 */ +/* experiment +#define CONFIG_FPGA CFG_SPARTAN3 +#define CONFIG_FPGA_COUNT 1 +#define CFG_FPGA_PROG_FEEDBACK +#define CFG_FPGA_CHECK_CTRLC +*/ + +/* Input, PCI, Flexbus, and VCO */ +#define CONFIG_EXTRA_CLOCK + +#define CONFIG_PRAM 512 /* 512 KB */ + +#define CFG_PROMPT "-> " +#define CFG_LONGHELP /* undef to save memory */ + +#if defined(CONFIG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x10000) + +#define CFG_HZ 1000 + +#define CFG_MBAR 0xFC000000 + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR 0x80000000 +#define CFG_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */ +#define CFG_INIT_RAM_CTRL 0x221 +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET ((CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) - 16) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x40000000 +#define CFG_SDRAM_BASE1 0x48000000 +#define CFG_SDRAM_SIZE 256 /* SDRAM size in MB */ +#define CFG_SDRAM_CFG1 0x65311610 +#define CFG_SDRAM_CFG2 0x59670000 +#define CFG_SDRAM_CTRL 0xEA0B2000 +#define CFG_SDRAM_EMOD 0x40010000 +#define CFG_SDRAM_MODE 0x00010033 + +#define CFG_MEMTEST_START CFG_SDRAM_BASE + 0x400 +#define CFG_MEMTEST_END ((CFG_SDRAM_SIZE - 3) << 20) + +#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) +#define CFG_BOOTPARAMS_LEN 64*1024 +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization ?? + */ +/* Initial Memory map for Linux */ +#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) + +/* Configuration for environment + * Environment is embedded in u-boot in the second sector of the flash + */ +#define CFG_ENV_OFFSET 0x4000 +#define CFG_ENV_SECT_SIZE 0x2000 +#define CFG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_OVERWRITE 1 +#undef CFG_ENV_IS_EMBEDDED + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#ifdef CFG_ATMEL_BOOT +# define CFG_FLASH_BASE 0 +# define CFG_FLASH0_BASE CFG_CS0_BASE +# define CFG_FLASH1_BASE CFG_CS1_BASE +#else +# define CFG_FLASH_BASE CFG_FLASH0_BASE +# define CFG_FLASH0_BASE CFG_CS1_BASE +# define CFG_FLASH1_BASE CFG_CS0_BASE +#endif + +/* M54455EVB has one non CFI flash, defined CFG_FLASH_CFI will cause the system +/* M54455EVB has one non CFI flash, defined CFG_FLASH_CFI will cause the system + keep reset. */ +#undef CFG_FLASH_CFI +#ifdef CFG_FLASH_CFI + +# define CFG_FLASH_CFI_DRIVER 1 +# define CFG_FLASH_SIZE 0x1000000 /* Max size that the board might have */ +# define CFG_FLASH_CFI_WIDTH FLASH_CFI_8BIT +# define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +# define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ +# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ +# define CFG_FLASH_CHECKSUM +# define CFG_FLASH_BANKS_LIST { CFG_CS0_BASE, CFG_CS1_BASE } + +#else + +# define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ + +# define CFG_ATMEL_REGION 4 +# define CFG_ATMEL_TOTALSECT 11 +# define CFG_ATMEL_SECT {1, 2, 1, 7} +# define CFG_ATMEL_SECTSZ {0x4000, 0x2000, 0x8000, 0x10000} +# define CFG_INTEL_SECT 137 + +/* max number of sectors on one chip */ +# define CFG_MAX_FLASH_SECT (CFG_ATMEL_TOTALSECT + CFG_INTEL_SECT) +# define CFG_FLASH_ERASE_TOUT 2000 /* Atmel needs longer timeout */ +# define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ +# define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ +# define CFG_FLASH_UNLOCK_TOUT 100 /* Timeout for Flash Clear Lock Bits (in ms) */ +# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ +# define CFG_FLASH_CHECKSUM + +#endif + +/* + * This is setting for JFFS2 support in u-boot. + * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. + */ +#ifdef CFG_ATMEL_BOOT +# define CONFIG_JFFS2_DEV "nor0" +# define CONFIG_JFFS2_PART_SIZE 0x01000000 +# define CONFIG_JFFS2_PART_OFFSET CFG_FLASH1_BASE +#else +# define CONFIG_JFFS2_DEV "nor0" +# define CONFIG_JFFS2_PART_SIZE (0x01000000 - 0x500000) +# define CONFIG_JFFS2_PART_OFFSET (CFG_FLASH0_BASE + 0x500000) +#endif + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 + +/*----------------------------------------------------------------------- + * Memory bank definitions + */ +/* + * CS0 - NOR Flash 1, 2, 4, or 8MB + * CS1 - CompactFlash and registers + * CS2 - CPLD + * CS3 - FPGA + * CS4 - Available + * CS5 - Available + */ + +#ifdef CFG_ATMEL_BOOT + /* Atmel Flash */ +#define CFG_CS0_BASE 0 +#define CFG_CS0_MASK 0x00070001 +#define CFG_CS0_CTRL 0x00001140 +/* Intel Flash */ +#define CFG_CS1_BASE 0x04000000 +#define CFG_CS1_MASK 0x01FF0001 +#define CFG_CS1_CTRL 0x003F3D60 + +#define CFG_ATMEL_BASE CFG_CS0_BASE +#else +/* Intel Flash */ +#define CFG_CS0_BASE 0 +#define CFG_CS0_MASK 0x01FF0001 +#define CFG_CS0_CTRL 0x003F3D60 + /* Atmel Flash */ +#define CFG_CS1_BASE 0x04000000 +#define CFG_CS1_MASK 0x00070001 +#define CFG_CS1_CTRL 0x00001140 + +#define CFG_ATMEL_BASE CFG_CS1_BASE +#endif + +/* CPLD */ +#define CFG_CS2_BASE 0x08000000 +#define CFG_CS2_MASK 0x00070001 +#define CFG_CS2_CTRL 0x003f1140 + +/* FPGA */ +#define CFG_CS3_BASE 0x09000000 +#define CFG_CS3_MASK 0x00070001 +#define CFG_CS3_CTRL 0x00000020 + +#endif /* _JAMICA54455_H */ diff --git a/lib_m68k/board.c b/lib_m68k/board.c index 778ec788a81..43f97c404da 100644 --- a/lib_m68k/board.c +++ b/lib_m68k/board.c @@ -30,9 +30,7 @@ #include #include -#ifdef CONFIG_M5272 -#include -#endif +#include #if defined(CONFIG_CMD_IDE) #include @@ -139,19 +137,19 @@ void *sbrk (ptrdiff_t increment) char *strmhz(char *buf, long hz) { - long l, n; - long m; + long l, n; + long m; - n = hz / 1000000L; + n = hz / 1000000L; - l = sprintf (buf, "%ld", n); + l = sprintf (buf, "%ld", n); - m = (hz % 1000000L) / 1000L; + m = (hz % 1000000L) / 1000L; - if (m != 0) - sprintf (buf+l, ".%03ld", m); + if (m != 0) + sprintf (buf+l, ".%03ld", m); - return (buf); + return (buf); } /* @@ -169,7 +167,7 @@ char *strmhz(char *buf, long hz) typedef int (init_fnc_t) (void); /************************************************************************ - * Init Utilities * + * Init Utilities ************************************************************************ * Some of this code should be moved into the core functions, * but let's get it working (again) first... @@ -383,6 +381,14 @@ board_init_f (ulong bootflag) WATCHDOG_RESET (); bd->bi_intfreq = gd->cpu_clk; /* Internal Freq, in Hz */ bd->bi_busfreq = gd->bus_clk; /* Bus Freq, in Hz */ +#ifdef CONFIG_PCI + bd->bi_pcifreq = gd->pci_clk; /* PCI Freq in Hz */ +#endif +#ifdef CONFIG_EXTRA_CLOCK + bd->bi_inpfreq = gd->inp_clk; /* input Freq in Hz */ + bd->bi_vcofreq = gd->vco_clk; /* vco Freq in Hz */ + bd->bi_flbfreq = gd->flb_clk; /* flexbus Freq in Hz */ +#endif bd->bi_baudrate = gd->baudrate; /* Console Baudrate */ #ifdef CFG_EXTBDINFO diff --git a/lib_m68k/interrupts.c b/lib_m68k/interrupts.c old mode 100755 new mode 100644 diff --git a/lib_m68k/m68k_linux.c b/lib_m68k/m68k_linux.c index 6c194f80aa7..fde1744e45c 100644 --- a/lib_m68k/m68k_linux.c +++ b/lib_m68k/m68k_linux.c @@ -25,6 +25,8 @@ #include #include #include +#include +#include #include DECLARE_GLOBAL_DATA_PTR; @@ -34,103 +36,189 @@ DECLARE_GLOBAL_DATA_PTR; #define LINUX_MAX_ENVS 256 #define LINUX_MAX_ARGS 256 -extern image_header_t header; /* from cmd_bootm.c */ - -extern int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]); - -static int linux_argc; -static char **linux_argv; - -static char **linux_env; -static char *linux_env_p; -static int linux_env_idx; +#ifdef CONFIG_SHOW_BOOT_PROGRESS +# include +# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) +#else +# define SHOW_BOOT_PROGRESS(arg) +#endif -static void linux_params_init (ulong start, char *commandline); -static void linux_env_set (char *env_name, char *env_val); +extern image_header_t header; -void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], - ulong addr, ulong * len_ptr, int verify) +void do_bootm_linux(cmd_tbl_t * cmdtp, int flag, + int argc, char *argv[], + ulong addr, ulong * len_ptr, int verify) { - ulong len = 0, checksum; + ulong sp; + ulong len, checksum; ulong initrd_start, initrd_end; + ulong cmd_start, cmd_end; + ulong initrd_high; ulong data; - void (*theKernel) (int, char **, char **, int *); + int initrd_copy_to_ram = 1; + char *cmdline; + char *s; + bd_t *kbd; + void (*kernel) (bd_t *, ulong, ulong, ulong, ulong); image_header_t *hdr = &header; - char *commandline = getenv ("bootargs"); - char env_buf[12]; - theKernel = - (void (*)(int, char **, char **, int *)) ntohl (hdr->ih_ep); + if ((s = getenv("initrd_high")) != NULL) { + /* a value of "no" or a similar string will act like 0, + * turning the "load high" feature off. This is intentional. + */ + initrd_high = simple_strtoul(s, NULL, 16); + if (initrd_high == ~0) + initrd_copy_to_ram = 0; + } else { /* not set, no restrictions to load high */ + initrd_high = ~0; + } + +#ifdef CONFIG_LOGBUFFER + kbd = gd->bd; + /* Prevent initrd from overwriting logbuffer */ + if (initrd_high < (kbd->bi_memsize - LOGBUFF_LEN - LOGBUFF_OVERHEAD)) + initrd_high = kbd->bi_memsize - LOGBUFF_LEN - LOGBUFF_OVERHEAD; + debug("## Logbuffer at 0x%08lX ", kbd->bi_memsize - LOGBUFF_LEN); +#endif + + /* + * Booting a (Linux) kernel image + * + * Allocate space for command line and board info - the + * address should be as high as possible within the reach of + * the kernel (see CFG_BOOTMAPSZ settings), but in unused + * memory, which means far enough below the current stack + * pointer. + */ + asm("movel %%a7, %%d0\n" + "movel %%d0, %0\n": "=d"(sp): :"%d0"); + debug("## Current stack ends at 0x%08lX ", sp); + + sp -= 2048; /* just to be sure */ + if (sp > CFG_BOOTMAPSZ) + sp = CFG_BOOTMAPSZ; + sp &= ~0xF; + + debug("=> set upper limit to 0x%08lX\n", sp); + + cmdline = (char *)((sp - CFG_BARGSIZE) & ~0xF); + kbd = (bd_t *) (((ulong) cmdline - sizeof(bd_t)) & ~0xF); + + if ((s = getenv("bootargs")) == NULL) + s = ""; + + strcpy(cmdline, s); + + cmd_start = (ulong) & cmdline[0]; + cmd_end = cmd_start + strlen(cmdline); + + *kbd = *(gd->bd); + +#ifdef DEBUG + printf("## cmdline at 0x%08lX ... 0x%08lX\n", cmd_start, cmd_end); + + do_bdinfo(NULL, 0, 0, NULL); +#endif + + if ((s = getenv("clocks_in_mhz")) != NULL) { + /* convert all clock information to MHz */ + kbd->bi_intfreq /= 1000000L; + kbd->bi_busfreq /= 1000000L; + } + + kernel = + (void (*)(bd_t *, ulong, ulong, ulong, ulong))ntohl(hdr->ih_ep); /* * Check if there is an initrd image */ + if (argc >= 3) { - show_boot_progress (9); + debug("Not skipping initrd\n"); + SHOW_BOOT_PROGRESS(9); - addr = simple_strtoul (argv[2], NULL, 16); + addr = simple_strtoul(argv[2], NULL, 16); - printf ("## Loading Ramdisk Image at %08lx ...\n", addr); + printf("## Loading RAMDisk Image at %08lx ...\n", addr); /* Copy header so we can blank CRC field for re-calculation */ - memcpy (&header, (char *) addr, sizeof (image_header_t)); + memmove(&header, (char *)addr, sizeof(image_header_t)); - if (ntohl (hdr->ih_magic) != IH_MAGIC) { - printf ("Bad Magic Number\n"); - show_boot_progress (-10); - do_reset (cmdtp, flag, argc, argv); + if (ntohl(hdr->ih_magic) != IH_MAGIC) { + puts("Bad Magic Number\n"); + SHOW_BOOT_PROGRESS(-10); + do_reset(cmdtp, flag, argc, argv); } data = (ulong) & header; - len = sizeof (image_header_t); + len = sizeof(image_header_t); - checksum = ntohl (hdr->ih_hcrc); + checksum = ntohl(hdr->ih_hcrc); hdr->ih_hcrc = 0; - if (crc32 (0, (char *) data, len) != checksum) { - printf ("Bad Header Checksum\n"); - show_boot_progress (-11); - do_reset (cmdtp, flag, argc, argv); + if (crc32(0, (uchar *) data, len) != checksum) { + puts("Bad Header Checksum\n"); + SHOW_BOOT_PROGRESS(-11); + do_reset(cmdtp, flag, argc, argv); } - show_boot_progress (10); + SHOW_BOOT_PROGRESS(10); - print_image_hdr (hdr); + print_image_hdr(hdr); - data = addr + sizeof (image_header_t); - len = ntohl (hdr->ih_size); + data = addr + sizeof(image_header_t); + len = ntohl(hdr->ih_size); if (verify) { ulong csum = 0; +#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG) + ulong cdata = data, edata = cdata + len; +#endif /* CONFIG_HW_WATCHDOG || CONFIG_WATCHDOG */ - printf (" Verifying Checksum ... "); - csum = crc32 (0, (char *) data, len); - if (csum != ntohl (hdr->ih_dcrc)) { - printf ("Bad Data CRC\n"); - show_boot_progress (-12); - do_reset (cmdtp, flag, argc, argv); + puts(" Verifying Checksum ... "); + +#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG) + + while (cdata < edata) { + ulong chunk = edata - cdata; + + if (chunk > CHUNKSZ) + chunk = CHUNKSZ; + csum = crc32(csum, (uchar *) cdata, chunk); + cdata += chunk; + + WATCHDOG_RESET(); } - printf ("OK\n"); +#else /* !(CONFIG_HW_WATCHDOG || CONFIG_WATCHDOG) */ + csum = crc32(0, (uchar *) data, len); +#endif /* CONFIG_HW_WATCHDOG || CONFIG_WATCHDOG */ + + if (csum != ntohl(hdr->ih_dcrc)) { + puts("Bad Data CRC\n"); + SHOW_BOOT_PROGRESS(-12); + do_reset(cmdtp, flag, argc, argv); + } + puts("OK\n"); } - show_boot_progress (11); + SHOW_BOOT_PROGRESS(11); if ((hdr->ih_os != IH_OS_LINUX) || (hdr->ih_arch != IH_CPU_M68K) || (hdr->ih_type != IH_TYPE_RAMDISK)) { - printf ("No Linux M68K Ramdisk Image\n"); - show_boot_progress (-13); - do_reset (cmdtp, flag, argc, argv); + puts("No Linux ColdFire Ramdisk Image\n"); + SHOW_BOOT_PROGRESS(-13); + do_reset(cmdtp, flag, argc, argv); } /* * Now check if we have a multifile image */ } else if ((hdr->ih_type == IH_TYPE_MULTI) && (len_ptr[1])) { - ulong tail = ntohl (len_ptr[0]) % 4; + u_long tail = ntohl(len_ptr[0]) % 4; int i; - show_boot_progress (13); + SHOW_BOOT_PROGRESS(13); /* skip kernel length and terminator */ data = (ulong) (&len_ptr[2]); @@ -138,130 +226,110 @@ void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], for (i = 1; len_ptr[i]; ++i) data += 4; /* add kernel length, and align */ - data += ntohl (len_ptr[0]); + data += ntohl(len_ptr[0]); if (tail) { data += 4 - tail; } - len = ntohl (len_ptr[1]); + len = ntohl(len_ptr[1]); } else { /* * no initrd image */ - show_boot_progress (14); + SHOW_BOOT_PROGRESS(14); - data = 0; + len = data = 0; } -#ifdef DEBUG if (!data) { - printf ("No initrd\n"); + debug("No initrd\n"); } -#endif if (data) { - initrd_start = data; - initrd_end = initrd_start + len; - } else { - initrd_start = 0; - initrd_end = 0; - } - - show_boot_progress (15); - -#ifdef DEBUG - printf ("## Transferring control to Linux (at address %08lx) ...\n", - (ulong) theKernel); -#endif - - linux_params_init (PHYSADDR (gd->bd->bi_boot_params), commandline); - - sprintf (env_buf, "%lu", gd->ram_size >> 20); - linux_env_set ("memsize", env_buf); - - sprintf (env_buf, "0x%08X", (uint) PHYSADDR (initrd_start)); - linux_env_set ("initrd_start", env_buf); - - sprintf (env_buf, "0x%X", (uint) (initrd_end - initrd_start)); - linux_env_set ("initrd_size", env_buf); - - sprintf (env_buf, "0x%08X", (uint) (gd->bd->bi_flashstart)); - linux_env_set ("flash_start", env_buf); - - sprintf (env_buf, "0x%X", (uint) (gd->bd->bi_flashsize)); - linux_env_set ("flash_size", env_buf); - - /* we assume that the kernel is in place */ - printf ("\nStarting kernel ...\n\n"); - - theKernel (linux_argc, linux_argv, linux_env, 0); -} - -static void linux_params_init (ulong start, char *line) -{ - char *next, *quote, *argp; - - linux_argc = 1; - linux_argv = (char **) start; - linux_argv[0] = 0; - argp = (char *) (linux_argv + LINUX_MAX_ARGS); - - next = line; - - while (line && *line && linux_argc < LINUX_MAX_ARGS) { - quote = strchr (line, '"'); - next = strchr (line, ' '); - - while (next != NULL && quote != NULL && quote < next) { - /* we found a left quote before the next blank - * now we have to find the matching right quote - */ - next = strchr (quote + 1, '"'); - if (next != NULL) { - quote = strchr (next + 1, '"'); - next = strchr (next + 1, ' '); + if (!initrd_copy_to_ram) { /* zero-copy ramdisk support */ + initrd_start = data; + initrd_end = initrd_start + len; + } else { + initrd_start = (ulong) kbd - len; + initrd_start &= ~(4096 - 1); /* align on page */ + + if (initrd_high) { + ulong nsp; + + /* + * the inital ramdisk does not need to be within + * CFG_BOOTMAPSZ as it is not accessed until after + * the mm system is initialised. + * + * do the stack bottom calculation again and see if + * the initrd will fit just below the monitor stack + * bottom without overwriting the area allocated + * above for command line args and board info. + */ + asm("movel %%a7, %%d0\n" + "movel %%d0, %0\n": "=d"(nsp): :"%d0"); + nsp -= 2048; /* just to be sure */ + nsp &= ~0xF; + + if (nsp > initrd_high) /* limit as specified */ + nsp = initrd_high; + + nsp -= len; + nsp &= ~(4096 - 1); /* align on page */ + + if (nsp >= sp) + initrd_start = nsp; } - } - if (next == NULL) { - next = line + strlen (line); + SHOW_BOOT_PROGRESS(12); + + debug + ("## initrd at 0x%08lX ... 0x%08lX (len=%ld=0x%lX)\n", + data, data + len - 1, len, len); + + initrd_end = initrd_start + len; + printf(" Loading Ramdisk to %08lx, end %08lx ... ", + initrd_start, initrd_end); +#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG) + { + size_t l = len; + void *to = (void *)initrd_start; + void *from = (void *)data; + + while (l > 0) { + size_t tail = + (l > CHUNKSZ) ? CHUNKSZ : l; + WATCHDOG_RESET(); + memmove(to, from, tail); + to += tail; + from += tail; + l -= tail; + } + } +#else /* !(CONFIG_HW_WATCHDOG || CONFIG_WATCHDOG) */ + memmove((void *)initrd_start, (void *)data, len); +#endif /* CONFIG_HW_WATCHDOG || CONFIG_WATCHDOG */ + puts("OK\n"); } - - linux_argv[linux_argc] = argp; - memcpy (argp, line, next - line); - argp[next - line] = 0; - - argp += next - line + 1; - linux_argc++; - - if (*next) - next++; - - line = next; + } else { + initrd_start = 0; + initrd_end = 0; } - linux_env = (char **) (((ulong) argp + 15) & ~15); - linux_env[0] = 0; - linux_env_p = (char *) (linux_env + LINUX_MAX_ENVS); - linux_env_idx = 0; -} - -static void linux_env_set (char *env_name, char *env_val) -{ - if (linux_env_idx < LINUX_MAX_ENVS - 1) { - linux_env[linux_env_idx] = linux_env_p; - - strcpy (linux_env_p, env_name); - linux_env_p += strlen (env_name); + debug("## Transferring control to Linux (at address %08lx) ...\n", + (ulong) kernel); - strcpy (linux_env_p, "="); - linux_env_p += 1; + SHOW_BOOT_PROGRESS(15); - strcpy (linux_env_p, env_val); - linux_env_p += strlen (env_val); - - linux_env_p++; - linux_env[++linux_env_idx] = 0; - } + /* + * Linux Kernel Parameters (passing board info data): + * r3: ptr to board info data + * r4: initrd_start or 0 if no initrd + * r5: initrd_end - unused if r4 is 0 + * r6: Start of command line string + * r7: End of command line string + */ + (*kernel) (kbd, initrd_start, initrd_end, cmd_start, cmd_end); + /* does not return */ } -- cgit v1.3.1 From e58fe95784d2514fc9c21028dc59f2b319a35d80 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Thu, 16 Aug 2007 22:53:09 -0500 Subject: mpc83xx: move freescale boards to boards/freescale includes build fixes. Signed-off-by: Kim Phillips --- Makefile | 10 +- board/freescale/mpc8313erdb/Makefile | 50 ++++ board/freescale/mpc8313erdb/config.mk | 1 + board/freescale/mpc8313erdb/mpc8313erdb.c | 121 ++++++++ board/freescale/mpc8313erdb/sdram.c | 130 +++++++++ board/freescale/mpc832xemds/Makefile | 50 ++++ board/freescale/mpc832xemds/config.mk | 28 ++ board/freescale/mpc832xemds/mpc832xemds.c | 187 +++++++++++++ board/freescale/mpc832xemds/pci.c | 298 ++++++++++++++++++++ board/freescale/mpc8349emds/Makefile | 50 ++++ board/freescale/mpc8349emds/config.mk | 28 ++ board/freescale/mpc8349emds/mpc8349emds.c | 274 ++++++++++++++++++ board/freescale/mpc8349emds/pci.c | 446 ++++++++++++++++++++++++++++++ board/freescale/mpc8349itx/Makefile | 48 ++++ board/freescale/mpc8349itx/config.mk | 31 +++ board/freescale/mpc8349itx/mpc8349itx.c | 407 +++++++++++++++++++++++++++ board/freescale/mpc8349itx/pci.c | 392 ++++++++++++++++++++++++++ board/freescale/mpc8360emds/Makefile | 50 ++++ board/freescale/mpc8360emds/config.mk | 28 ++ board/freescale/mpc8360emds/mpc8360emds.c | 313 +++++++++++++++++++++ board/freescale/mpc8360emds/pci.c | 298 ++++++++++++++++++++ board/mpc8313erdb/Makefile | 50 ---- board/mpc8313erdb/config.mk | 1 - board/mpc8313erdb/mpc8313erdb.c | 121 -------- board/mpc8313erdb/sdram.c | 130 --------- board/mpc832xemds/Makefile | 50 ---- board/mpc832xemds/config.mk | 28 -- board/mpc832xemds/mpc832xemds.c | 187 ------------- board/mpc832xemds/pci.c | 298 -------------------- board/mpc8349emds/Makefile | 50 ---- board/mpc8349emds/config.mk | 28 -- board/mpc8349emds/mpc8349emds.c | 274 ------------------ board/mpc8349emds/pci.c | 446 ------------------------------ board/mpc8349itx/Makefile | 48 ---- board/mpc8349itx/config.mk | 31 --- board/mpc8349itx/mpc8349itx.c | 407 --------------------------- board/mpc8349itx/pci.c | 392 -------------------------- board/mpc8360emds/Makefile | 50 ---- board/mpc8360emds/config.mk | 28 -- board/mpc8360emds/mpc8360emds.c | 313 --------------------- board/mpc8360emds/pci.c | 298 -------------------- 41 files changed, 3235 insertions(+), 3235 deletions(-) create mode 100644 board/freescale/mpc8313erdb/Makefile create mode 100644 board/freescale/mpc8313erdb/config.mk create mode 100644 board/freescale/mpc8313erdb/mpc8313erdb.c create mode 100644 board/freescale/mpc8313erdb/sdram.c create mode 100644 board/freescale/mpc832xemds/Makefile create mode 100644 board/freescale/mpc832xemds/config.mk create mode 100644 board/freescale/mpc832xemds/mpc832xemds.c create mode 100644 board/freescale/mpc832xemds/pci.c create mode 100644 board/freescale/mpc8349emds/Makefile create mode 100644 board/freescale/mpc8349emds/config.mk create mode 100644 board/freescale/mpc8349emds/mpc8349emds.c create mode 100644 board/freescale/mpc8349emds/pci.c create mode 100644 board/freescale/mpc8349itx/Makefile create mode 100644 board/freescale/mpc8349itx/config.mk create mode 100644 board/freescale/mpc8349itx/mpc8349itx.c create mode 100644 board/freescale/mpc8349itx/pci.c create mode 100644 board/freescale/mpc8360emds/Makefile create mode 100644 board/freescale/mpc8360emds/config.mk create mode 100644 board/freescale/mpc8360emds/mpc8360emds.c create mode 100644 board/freescale/mpc8360emds/pci.c delete mode 100644 board/mpc8313erdb/Makefile delete mode 100644 board/mpc8313erdb/config.mk delete mode 100644 board/mpc8313erdb/mpc8313erdb.c delete mode 100644 board/mpc8313erdb/sdram.c delete mode 100644 board/mpc832xemds/Makefile delete mode 100644 board/mpc832xemds/config.mk delete mode 100644 board/mpc832xemds/mpc832xemds.c delete mode 100644 board/mpc832xemds/pci.c delete mode 100644 board/mpc8349emds/Makefile delete mode 100644 board/mpc8349emds/config.mk delete mode 100644 board/mpc8349emds/mpc8349emds.c delete mode 100644 board/mpc8349emds/pci.c delete mode 100644 board/mpc8349itx/Makefile delete mode 100644 board/mpc8349itx/config.mk delete mode 100644 board/mpc8349itx/mpc8349itx.c delete mode 100644 board/mpc8349itx/pci.c delete mode 100644 board/mpc8360emds/Makefile delete mode 100644 board/mpc8360emds/config.mk delete mode 100644 board/mpc8360emds/mpc8360emds.c delete mode 100644 board/mpc8360emds/pci.c (limited to 'Makefile') diff --git a/Makefile b/Makefile index 65efd3f5e05..62531a5f535 100644 --- a/Makefile +++ b/Makefile @@ -1688,7 +1688,7 @@ MPC8313ERDB_66_config: unconfig echo -n "...66M..." ; \ echo "#define CFG_66MHZ" >>$(obj)include/config.h ; \ fi ; - @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb + @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescale MPC8323ERDB_config: unconfig @$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale @@ -1716,10 +1716,10 @@ MPC832XEMDS_SLAVE_config: unconfig echo -n "...66M..." ; \ echo "#define PCI_66M" >>$(obj)include/config.h ; \ fi ; - @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds + @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale MPC8349EMDS_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds + @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds freescale MPC8349ITX_config \ MPC8349ITX_LOWBOOT_config \ @@ -1733,7 +1733,7 @@ MPC8349ITXGP_config: unconfig @if [ "$(findstring LOWBOOT,$@)" ] ; then \ echo "TEXT_BASE = 0xFE000000" >$(obj)board/mpc8349itx/config.tmp ; \ fi - @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx + @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx freescale MPC8360EMDS_config \ MPC8360EMDS_HOST_33_config \ @@ -1758,7 +1758,7 @@ MPC8360EMDS_SLAVE_config: unconfig echo -n "...66M..." ; \ echo "#define PCI_66M" >>$(obj)include/config.h ; \ fi ; - @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds + @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale sbc8349_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349 diff --git a/board/freescale/mpc8313erdb/Makefile b/board/freescale/mpc8313erdb/Makefile new file mode 100644 index 00000000000..a987e510dd2 --- /dev/null +++ b/board/freescale/mpc8313erdb/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o sdram.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) crv $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/mpc8313erdb/config.mk b/board/freescale/mpc8313erdb/config.mk new file mode 100644 index 00000000000..f76826495ef --- /dev/null +++ b/board/freescale/mpc8313erdb/config.mk @@ -0,0 +1 @@ +TEXT_BASE = 0xFE000000 diff --git a/board/freescale/mpc8313erdb/mpc8313erdb.c b/board/freescale/mpc8313erdb/mpc8313erdb.c new file mode 100644 index 00000000000..861c143df57 --- /dev/null +++ b/board/freescale/mpc8313erdb/mpc8313erdb.c @@ -0,0 +1,121 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006-2007 + * + * Author: Scott Wood + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#if defined(CONFIG_OF_FLAT_TREE) +#include +#elif defined(CONFIG_OF_LIBFDT) +#include +#endif +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +int board_early_init_f(void) +{ +#ifndef CFG_8313ERDB_BROKEN_PMC + volatile immap_t *im = (immap_t *)CFG_IMMR; + + if (im->pmc.pmccr1 & PMCCR1_POWER_OFF) + gd->flags |= GD_FLG_SILENT; +#endif + + return 0; +} + +int checkboard(void) +{ + puts("Board: Freescale MPC8313ERDB\n"); + return 0; +} + +static struct pci_region pci_regions[] = { + { + bus_start: CFG_PCI1_MEM_BASE, + phys_start: CFG_PCI1_MEM_PHYS, + size: CFG_PCI1_MEM_SIZE, + flags: PCI_REGION_MEM | PCI_REGION_PREFETCH + }, + { + bus_start: CFG_PCI1_MMIO_BASE, + phys_start: CFG_PCI1_MMIO_PHYS, + size: CFG_PCI1_MMIO_SIZE, + flags: PCI_REGION_MEM + }, + { + bus_start: CFG_PCI1_IO_BASE, + phys_start: CFG_PCI1_IO_PHYS, + size: CFG_PCI1_IO_SIZE, + flags: PCI_REGION_IO + } +}; + +void pci_init_board(void) +{ + volatile immap_t *immr = (volatile immap_t *)CFG_IMMR; + volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk; + volatile law83xx_t *pci_law = immr->sysconf.pcilaw; + struct pci_region *reg[] = { pci_regions }; + int warmboot; + + /* Enable all 3 PCI_CLK_OUTPUTs. */ + clk->occr |= 0xe0000000; + + /* + * Configure PCI Local Access Windows + */ + pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR; + pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB; + + pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR; + pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB; + + warmboot = gd->bd->bi_bootflags & BOOTFLAG_WARM; +#ifndef CFG_8313ERDB_BROKEN_PMC + warmboot |= immr->pmc.pmccr1 & PMCCR1_POWER_OFF; +#endif + + mpc83xx_pci_init(1, reg, warmboot); +} + +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ +#if defined(CONFIG_OF_FLAT_TREE) + u32 *p; + int len; + + p = ft_get_prop(blob, "/memory/reg", &len); + if (p != NULL) { + *p++ = cpu_to_be32(bd->bi_memstart); + *p = cpu_to_be32(bd->bi_memsize); + } +#endif + ft_cpu_setup(blob, bd); +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif +} +#endif diff --git a/board/freescale/mpc8313erdb/sdram.c b/board/freescale/mpc8313erdb/sdram.c new file mode 100644 index 00000000000..e6e84107eb2 --- /dev/null +++ b/board/freescale/mpc8313erdb/sdram.c @@ -0,0 +1,130 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006-2007 + * + * Authors: Nick.Spence@freescale.com + * Wilson.Lo@freescale.com + * scottwood@freescale.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include +#include + +#include + +#ifndef CFG_8313ERDB_BROKEN_PMC +static void resume_from_sleep(void) +{ + DECLARE_GLOBAL_DATA_PTR; + u32 magic = *(u32 *)0; + + typedef void (*func_t)(void); + func_t resume = *(func_t *)4; + + if (magic == 0xf5153ae5) + resume(); + + gd->flags &= ~GD_FLG_SILENT; + puts("\nResume from sleep failed: bad magic word\n"); +} +#endif + +/* Fixed sdram init -- doesn't use serial presence detect. + * + * This is useful for faster booting in configs where the RAM is unlikely + * to be changed, or for things like NAND booting where space is tight. + */ +static long fixed_sdram(void) +{ + volatile immap_t *im = (volatile immap_t *)CFG_IMMR; + u32 msize = CFG_DDR_SIZE * 1024 * 1024; + u32 msize_log2 = __ilog2(msize); + + im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12; + im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1); + im->sysconf.ddrcdr = CFG_DDRCDR_VALUE; + + /* + * Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg], + * or the DDR2 controller may fail to initialize correctly. + */ + udelay(50000); + + im->ddr.csbnds[0].csbnds = (msize - 1) >> 24; + im->ddr.cs_config[0] = CFG_DDR_CONFIG; + + /* Currently we use only one CS, so disable the other bank. */ + im->ddr.cs_config[1] = 0; + + im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL; + im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; + im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; + im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; + +#ifndef CFG_8313ERDB_BROKEN_PMC + if (im->pmc.pmccr1 & PMCCR1_POWER_OFF) + im->ddr.sdram_cfg = CFG_SDRAM_CFG | SDRAM_CFG_BI; + else +#endif + im->ddr.sdram_cfg = CFG_SDRAM_CFG; + + im->ddr.sdram_cfg2 = CFG_SDRAM_CFG2; + im->ddr.sdram_mode = CFG_DDR_MODE; + im->ddr.sdram_mode2 = CFG_DDR_MODE_2; + + im->ddr.sdram_interval = CFG_DDR_INTERVAL; + sync(); + + /* enable DDR controller */ + im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; + + return msize; +} + +long int initdram(int board_type) +{ + volatile immap_t *im = (volatile immap_t *)CFG_IMMR; + volatile lbus83xx_t *lbc = &im->lbus; + u32 msize; + + if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) + return -1; + + /* DDR SDRAM - Main SODIMM */ + msize = fixed_sdram(); + + /* Local Bus setup lbcr and mrtpr */ + lbc->lbcr = CFG_LBC_LBCR; + lbc->mrtpr = CFG_LBC_MRTPR; + sync(); + +#ifndef CFG_8313ERDB_BROKEN_PMC + if (im->pmc.pmccr1 & PMCCR1_POWER_OFF) + resume_from_sleep(); +#endif + + /* return total bus SDRAM size(bytes) -- DDR */ + return msize; +} diff --git a/board/freescale/mpc832xemds/Makefile b/board/freescale/mpc832xemds/Makefile new file mode 100644 index 00000000000..ea52484c063 --- /dev/null +++ b/board/freescale/mpc832xemds/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o pci.o ../common/pq-mds-pib.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/mpc832xemds/config.mk b/board/freescale/mpc832xemds/config.mk new file mode 100644 index 00000000000..6c3eca75341 --- /dev/null +++ b/board/freescale/mpc832xemds/config.mk @@ -0,0 +1,28 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# MPC832XEMDS +# + +TEXT_BASE = 0xFE000000 diff --git a/board/freescale/mpc832xemds/mpc832xemds.c b/board/freescale/mpc832xemds/mpc832xemds.c new file mode 100644 index 00000000000..6ba25d4644c --- /dev/null +++ b/board/freescale/mpc832xemds/mpc832xemds.c @@ -0,0 +1,187 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * + * Dave Liu + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#if defined(CONFIG_PCI) +#include +#endif +#if defined(CONFIG_SPD_EEPROM) +#include +#else +#include +#endif +#if defined(CONFIG_OF_FLAT_TREE) +#include +#elif defined(CONFIG_OF_LIBFDT) +#include +#endif +#if defined(CONFIG_PQ_MDS_PIB) +#include "../common/pq-mds-pib.h" +#endif + +const qe_iop_conf_t qe_iop_conf_tab[] = { + /* ETH3 */ + {1, 0, 1, 0, 1}, /* TxD0 */ + {1, 1, 1, 0, 1}, /* TxD1 */ + {1, 2, 1, 0, 1}, /* TxD2 */ + {1, 3, 1, 0, 1}, /* TxD3 */ + {1, 9, 1, 0, 1}, /* TxER */ + {1, 12, 1, 0, 1}, /* TxEN */ + {3, 24, 2, 0, 1}, /* TxCLK->CLK10 */ + + {1, 4, 2, 0, 1}, /* RxD0 */ + {1, 5, 2, 0, 1}, /* RxD1 */ + {1, 6, 2, 0, 1}, /* RxD2 */ + {1, 7, 2, 0, 1}, /* RxD3 */ + {1, 8, 2, 0, 1}, /* RxER */ + {1, 10, 2, 0, 1}, /* RxDV */ + {0, 13, 2, 0, 1}, /* RxCLK->CLK9 */ + {1, 11, 2, 0, 1}, /* COL */ + {1, 13, 2, 0, 1}, /* CRS */ + + /* ETH4 */ + {1, 18, 1, 0, 1}, /* TxD0 */ + {1, 19, 1, 0, 1}, /* TxD1 */ + {1, 20, 1, 0, 1}, /* TxD2 */ + {1, 21, 1, 0, 1}, /* TxD3 */ + {1, 27, 1, 0, 1}, /* TxER */ + {1, 30, 1, 0, 1}, /* TxEN */ + {3, 6, 2, 0, 1}, /* TxCLK->CLK8 */ + + {1, 22, 2, 0, 1}, /* RxD0 */ + {1, 23, 2, 0, 1}, /* RxD1 */ + {1, 24, 2, 0, 1}, /* RxD2 */ + {1, 25, 2, 0, 1}, /* RxD3 */ + {1, 26, 1, 0, 1}, /* RxER */ + {1, 28, 2, 0, 1}, /* Rx_DV */ + {3, 31, 2, 0, 1}, /* RxCLK->CLK7 */ + {1, 29, 2, 0, 1}, /* COL */ + {1, 31, 2, 0, 1}, /* CRS */ + + {3, 4, 3, 0, 2}, /* MDIO */ + {3, 5, 1, 0, 2}, /* MDC */ + + {0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */ +}; + +int board_early_init_f(void) +{ + volatile u8 *bcsr = (volatile u8 *)CFG_BCSR; + + /* Enable flash write */ + bcsr[9] &= ~0x08; + + return 0; +} + +int board_early_init_r(void) +{ +#ifdef CONFIG_PQ_MDS_PIB + pib_init(); +#endif + return 0; +} + +int fixed_sdram(void); + +long int initdram(int board_type) +{ + volatile immap_t *im = (immap_t *) CFG_IMMR; + u32 msize = 0; + + if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) + return -1; + + /* DDR SDRAM - Main SODIMM */ + im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; + + msize = fixed_sdram(); + + /* return total bus SDRAM size(bytes) -- DDR */ + return (msize * 1024 * 1024); +} + +/************************************************************************* + * fixed sdram init -- doesn't use serial presence detect. + ************************************************************************/ +int fixed_sdram(void) +{ + volatile immap_t *im = (immap_t *) CFG_IMMR; + u32 msize = 0; + u32 ddr_size; + u32 ddr_size_log2; + + msize = CFG_DDR_SIZE; + for (ddr_size = msize << 20, ddr_size_log2 = 0; + (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) { + if (ddr_size & 1) { + return -1; + } + } + im->sysconf.ddrlaw[0].ar = + LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); +#if (CFG_DDR_SIZE != 128) +#warning Currenly any ddr size other than 128 is not supported +#endif + im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL; + im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS; + im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG; + im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; + im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; + im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; + im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG; + im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2; + im->ddr.sdram_mode = CFG_DDR_MODE; + im->ddr.sdram_mode2 = CFG_DDR_MODE2; + im->ddr.sdram_interval = CFG_DDR_INTERVAL; + __asm__ __volatile__ ("sync"); + udelay(200); + + im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; + __asm__ __volatile__ ("sync"); + return msize; +} + +int checkboard(void) +{ + puts("Board: Freescale MPC832XEMDS\n"); + return 0; +} + +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ +#if defined(CONFIG_OF_FLAT_TREE) + u32 *p; + int len; + + p = ft_get_prop(blob, "/memory/reg", &len); + if (p != NULL) { + *p++ = cpu_to_be32(bd->bi_memstart); + *p = cpu_to_be32(bd->bi_memsize); + } +#endif + ft_cpu_setup(blob, bd); +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif +} +#endif diff --git a/board/freescale/mpc832xemds/pci.c b/board/freescale/mpc832xemds/pci.c new file mode 100644 index 00000000000..6bc35c70f2d --- /dev/null +++ b/board/freescale/mpc832xemds/pci.c @@ -0,0 +1,298 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +/* + * PCI Configuration space access support for MPC83xx PCI Bridge + */ +#include +#include +#include +#include +#include +#if defined(CONFIG_OF_FLAT_TREE) +#include +#elif defined(CONFIG_OF_LIBFDT) +#include +#endif + +#include + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_PCI) +#define PCI_FUNCTION_CONFIG 0x44 +#define PCI_FUNCTION_CFG_LOCK 0x20 + +/* + * Initialize PCI Devices, report devices found + */ +#ifndef CONFIG_PCI_PNP +static struct pci_config_table pci_mpc83xxemds_config_table[] = { + { + PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + pci_cfgfunc_config_device, + {PCI_ENET0_IOADDR, + PCI_ENET0_MEMADDR, + PCI_COMMON_MEMORY | PCI_COMMAND_MASTER} + }, + {} +} +#endif +static struct pci_controller hose[] = { + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc83xxemds_config_table, +#endif + }, +}; + +/********************************************************************** + * pci_init_board() + *********************************************************************/ +void pci_init_board(void) +#ifdef CONFIG_PCISLAVE +{ + u16 reg16; + volatile immap_t *immr; + volatile law83xx_t *pci_law; + volatile pot83xx_t *pci_pot; + volatile pcictrl83xx_t *pci_ctrl; + volatile pciconf83xx_t *pci_conf; + + immr = (immap_t *) CFG_IMMR; + pci_law = immr->sysconf.pcilaw; + pci_pot = immr->ios.pot; + pci_ctrl = immr->pci_ctrl; + pci_conf = immr->pci_conf; + /* + * Configure PCI Inbound Translation Windows + */ + pci_ctrl[0].pitar0 = 0x0; + pci_ctrl[0].pibar0 = 0x0; + pci_ctrl[0].piwar0 = PIWAR_EN | PIWAR_RTT_SNOOP | + PIWAR_WTT_SNOOP | PIWAR_IWS_4K; + + pci_ctrl[0].pitar1 = 0x0; + pci_ctrl[0].pibar1 = 0x0; + pci_ctrl[0].piebar1 = 0x0; + pci_ctrl[0].piwar1 &= ~PIWAR_EN; + + pci_ctrl[0].pitar2 = 0x0; + pci_ctrl[0].pibar2 = 0x0; + pci_ctrl[0].piebar2 = 0x0; + pci_ctrl[0].piwar2 &= ~PIWAR_EN; + + hose[0].first_busno = 0; + hose[0].last_busno = 0xff; + pci_setup_indirect(&hose[0], + (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); + reg16 = 0xff; + + pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_STATUS, 0xffff); + pci_hose_write_config_byte(&hose[0], PCI_BDF(0, 0, 0), + PCI_LATENCY_TIMER, 0x80); + + /* + * Unlock configuration lock in PCI function configuration register. + */ + pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_FUNCTION_CONFIG, ®16); + reg16 &= ~(PCI_FUNCTION_CFG_LOCK); + pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_FUNCTION_CONFIG, reg16); + + printf("Enabled PCI 32bit Agent Mode\n"); +} +#else +{ + volatile immap_t *immr; + volatile clk83xx_t *clk; + volatile law83xx_t *pci_law; + volatile pot83xx_t *pci_pot; + volatile pcictrl83xx_t *pci_ctrl; + volatile pciconf83xx_t *pci_conf; + + u16 reg16; + u32 val32; + u32 dev; + + immr = (immap_t *) CFG_IMMR; + clk = (clk83xx_t *) & immr->clk; + pci_law = immr->sysconf.pcilaw; + pci_pot = immr->ios.pot; + pci_ctrl = immr->pci_ctrl; + pci_conf = immr->pci_conf; + /* + * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode + */ + val32 = clk->occr; + udelay(2000); +#if defined(PCI_66M) + clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2; + printf("PCI clock is 66MHz\n"); +#elif defined(PCI_33M) + clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 | + OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICR; + printf("PCI clock is 33MHz\n"); +#else + clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2; + printf("PCI clock is 66MHz\n"); +#endif + udelay(2000); + + /* + * Configure PCI Local Access Windows + */ + pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR; + pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M; + + pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR; + pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_1M; + + /* + * Configure PCI Outbound Translation Windows + */ + + /* PCI mem space - prefetch */ + pci_pot[0].potar = (CFG_PCI_MEM_BASE >> 12) & POTAR_TA_MASK; + pci_pot[0].pobar = (CFG_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[0].pocmr = + POCMR_EN | POCMR_SE | (POCMR_CM_256M & POCMR_CM_MASK); + + /* PCI mmio - non-prefetch mem space */ + pci_pot[1].potar = (CFG_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[1].pobar = (CFG_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[1].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK); + + /* PCI IO space */ + pci_pot[2].potar = (CFG_PCI_IO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[2].pobar = (CFG_PCI_IO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[2].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); + + /* + * Configure PCI Inbound Translation Windows + */ + pci_ctrl[0].pitar1 = (CFG_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK; + pci_ctrl[0].pibar1 = (CFG_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK; + pci_ctrl[0].piebar1 = 0x0; + pci_ctrl[0].piwar1 = + PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | + PIWAR_IWS_2G; + + /* + * Release PCI RST Output signal + */ + udelay(2000); + pci_ctrl[0].gcr = 1; + udelay(2000); + + hose[0].first_busno = 0; + hose[0].last_busno = 0xff; + + /* PCI memory prefetch space */ + pci_set_region(hose[0].regions + 0, + CFG_PCI_MEM_BASE, + CFG_PCI_MEM_PHYS, + CFG_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); + + /* PCI memory space */ + pci_set_region(hose[0].regions + 1, + CFG_PCI_MMIO_BASE, + CFG_PCI_MMIO_PHYS, CFG_PCI_MMIO_SIZE, PCI_REGION_MEM); + + /* PCI IO space */ + pci_set_region(hose[0].regions + 2, + CFG_PCI_IO_BASE, + CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO); + + /* System memory space */ + pci_set_region(hose[0].regions + 3, + CFG_PCI_SLV_MEM_LOCAL, + CFG_PCI_SLV_MEM_BUS, + CFG_PCI_SLV_MEM_SIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + hose[0].region_count = 4; + + pci_setup_indirect(&hose[0], + (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); + + pci_register_hose(hose); + + /* + * Write command register + */ + reg16 = 0xff; + dev = PCI_BDF(0, 0, 0); + pci_hose_read_config_word(&hose[0], dev, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(&hose[0], dev, PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(&hose[0], dev, PCI_STATUS, 0xffff); + pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80); + pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08); + + /* + * Hose scan. + */ + hose->last_busno = pci_hose_scan(hose); +} +#endif /* CONFIG_PCISLAVE */ + +#if defined(CONFIG_OF_LIBFDT) +void +ft_pci_setup(void *blob, bd_t *bd) +{ + int nodeoffset; + int err; + int tmp[2]; + + nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500"); + if (nodeoffset >= 0) { + tmp[0] = cpu_to_be32(hose[0].first_busno); + tmp[1] = cpu_to_be32(hose[0].last_busno); + err = fdt_setprop(blob, nodeoffset, "bus-range", + tmp, sizeof(tmp)); + + tmp[0] = cpu_to_be32(gd->pci_clk); + err = fdt_setprop(blob, nodeoffset, "clock-frequency", + tmp, sizeof(tmp[0])); + } +} +#elif defined(CONFIG_OF_FLAT_TREE) +void +ft_pci_setup(void *blob, bd_t *bd) +{ + u32 *p; + int len; + + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len); + if (p != NULL) { + p[0] = hose[0].first_busno; + p[1] = hose[0].last_busno; + } +} +#endif /* CONFIG_OF_FLAT_TREE */ +#endif /* CONFIG_PCI */ diff --git a/board/freescale/mpc8349emds/Makefile b/board/freescale/mpc8349emds/Makefile new file mode 100644 index 00000000000..5ec7a871d4d --- /dev/null +++ b/board/freescale/mpc8349emds/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o pci.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/mpc8349emds/config.mk b/board/freescale/mpc8349emds/config.mk new file mode 100644 index 00000000000..edf64d1508a --- /dev/null +++ b/board/freescale/mpc8349emds/config.mk @@ -0,0 +1,28 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# MPC8349EMDS +# + +TEXT_BASE = 0xFE000000 diff --git a/board/freescale/mpc8349emds/mpc8349emds.c b/board/freescale/mpc8349emds/mpc8349emds.c new file mode 100644 index 00000000000..39c09162760 --- /dev/null +++ b/board/freescale/mpc8349emds/mpc8349emds.c @@ -0,0 +1,274 @@ +/* + * (C) Copyright 2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include +#if defined(CONFIG_SPD_EEPROM) +#include +#endif +#if defined(CONFIG_OF_FLAT_TREE) +#include +#elif defined(CONFIG_OF_LIBFDT) +#include +#endif + +int fixed_sdram(void); +void sdram_init(void); + +#if defined(CONFIG_DDR_ECC) && defined(CONFIG_MPC83XX) +void ddr_enable_ecc(unsigned int dram_size); +#endif + +int board_early_init_f (void) +{ + volatile u8* bcsr = (volatile u8*)CFG_BCSR; + + /* Enable flash write */ + bcsr[1] &= ~0x01; + +#ifdef CFG_USE_MPC834XSYS_USB_PHY + /* Use USB PHY on SYS board */ + bcsr[5] |= 0x02; +#endif + + return 0; +} + +#define ns2clk(ns) (ns / (1000000000 / CONFIG_8349_CLKIN) + 1) + +long int initdram (int board_type) +{ + volatile immap_t *im = (immap_t *)CFG_IMMR; + u32 msize = 0; + + if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) + return -1; + + /* DDR SDRAM - Main SODIMM */ + im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; +#if defined(CONFIG_SPD_EEPROM) + msize = spd_sdram(); +#else + msize = fixed_sdram(); +#endif + /* + * Initialize SDRAM if it is on local bus. + */ + sdram_init(); + +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) + /* + * Initialize and enable DDR ECC. + */ + ddr_enable_ecc(msize * 1024 * 1024); +#endif + + /* return total bus SDRAM size(bytes) -- DDR */ + return (msize * 1024 * 1024); +} + +#if !defined(CONFIG_SPD_EEPROM) +/************************************************************************* + * fixed sdram init -- doesn't use serial presence detect. + ************************************************************************/ +int fixed_sdram(void) +{ + volatile immap_t *im = (immap_t *)CFG_IMMR; + u32 msize = 0; + u32 ddr_size; + u32 ddr_size_log2; + + msize = CFG_DDR_SIZE; + for (ddr_size = msize << 20, ddr_size_log2 = 0; + (ddr_size > 1); + ddr_size = ddr_size>>1, ddr_size_log2++) { + if (ddr_size & 1) { + return -1; + } + } + im->sysconf.ddrlaw[0].bar = ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff); + im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); + +#if (CFG_DDR_SIZE != 256) +#warning Currenly any ddr size other than 256 is not supported +#endif +#ifdef CONFIG_DDR_II + im->ddr.csbnds[2].csbnds = CFG_DDR_CS2_BNDS; + im->ddr.cs_config[2] = CFG_DDR_CS2_CONFIG; + im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; + im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; + im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; + im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG; + im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2; + im->ddr.sdram_mode = CFG_DDR_MODE; + im->ddr.sdram_mode2 = CFG_DDR_MODE2; + im->ddr.sdram_interval = CFG_DDR_INTERVAL; + im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL; +#else + im->ddr.csbnds[2].csbnds = 0x0000000f; + im->ddr.cs_config[2] = CFG_DDR_CONFIG; + + /* currently we use only one CS, so disable the other banks */ + im->ddr.cs_config[0] = 0; + im->ddr.cs_config[1] = 0; + im->ddr.cs_config[3] = 0; + + im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; + + im->ddr.sdram_cfg = + SDRAM_CFG_SREN +#if defined(CONFIG_DDR_2T_TIMING) + | SDRAM_CFG_2T_EN +#endif + | 2 << SDRAM_CFG_SDRAM_TYPE_SHIFT; +#if defined (CONFIG_DDR_32BIT) + /* for 32-bit mode burst length is 8 */ + im->ddr.sdram_cfg |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE); +#endif + im->ddr.sdram_mode = CFG_DDR_MODE; + + im->ddr.sdram_interval = CFG_DDR_INTERVAL; +#endif + udelay(200); + + /* enable DDR controller */ + im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; + return msize; +} +#endif/*!CFG_SPD_EEPROM*/ + + +int checkboard (void) +{ + puts("Board: Freescale MPC8349EMDS\n"); + return 0; +} + +/* + * if MPC8349EMDS is soldered with SDRAM + */ +#if defined(CFG_BR2_PRELIM) \ + && defined(CFG_OR2_PRELIM) \ + && defined(CFG_LBLAWBAR2_PRELIM) \ + && defined(CFG_LBLAWAR2_PRELIM) +/* + * Initialize SDRAM memory on the Local Bus. + */ + +void sdram_init(void) +{ + volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile lbus83xx_t *lbc= &immap->lbus; + uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE; + + /* + * Setup SDRAM Base and Option Registers, already done in cpu_init.c + */ + + /* setup mtrpt, lsrt and lbcr for LB bus */ + lbc->lbcr = CFG_LBC_LBCR; + lbc->mrtpr = CFG_LBC_MRTPR; + lbc->lsrt = CFG_LBC_LSRT; + asm("sync"); + + /* + * Configure the SDRAM controller Machine Mode Register. + */ + lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */ + + lbc->lsdmr = CFG_LBC_LSDMR_1; /* 0x68636733; precharge all the banks */ + asm("sync"); + *sdram_addr = 0xff; + udelay(100); + + lbc->lsdmr = CFG_LBC_LSDMR_2; /* 0x48636733; auto refresh */ + asm("sync"); + /*1 times*/ + *sdram_addr = 0xff; + udelay(100); + /*2 times*/ + *sdram_addr = 0xff; + udelay(100); + /*3 times*/ + *sdram_addr = 0xff; + udelay(100); + /*4 times*/ + *sdram_addr = 0xff; + udelay(100); + /*5 times*/ + *sdram_addr = 0xff; + udelay(100); + /*6 times*/ + *sdram_addr = 0xff; + udelay(100); + /*7 times*/ + *sdram_addr = 0xff; + udelay(100); + /*8 times*/ + *sdram_addr = 0xff; + udelay(100); + + /* 0x58636733; mode register write operation */ + lbc->lsdmr = CFG_LBC_LSDMR_4; + asm("sync"); + *sdram_addr = 0xff; + udelay(100); + + lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */ + asm("sync"); + *sdram_addr = 0xff; + udelay(100); +} +#else +void sdram_init(void) +{ +} +#endif + +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ +#if defined(CONFIG_OF_FLAT_TREE) + u32 *p; + int len; + + p = ft_get_prop(blob, "/memory/reg", &len); + if (p != NULL) { + *p++ = cpu_to_be32(bd->bi_memstart); + *p = cpu_to_be32(bd->bi_memsize); + } +#endif + ft_cpu_setup(blob, bd); +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif +} +#endif diff --git a/board/freescale/mpc8349emds/pci.c b/board/freescale/mpc8349emds/pci.c new file mode 100644 index 00000000000..ae94a2f384f --- /dev/null +++ b/board/freescale/mpc8349emds/pci.c @@ -0,0 +1,446 @@ +/* + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include +#if defined(CONFIG_OF_FLAT_TREE) +#include +#elif defined(CONFIG_OF_LIBFDT) +#include +#endif + + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_PCI + +/* System RAM mapped to PCI space */ +#define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE +#define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE + +#ifndef CONFIG_PCI_PNP +static struct pci_config_table pci_mpc8349emds_config_table[] = { + {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + PCI_IDSEL_NUMBER, PCI_ANY_ID, + pci_cfgfunc_config_device, {PCI_ENET0_IOADDR, + PCI_ENET0_MEMADDR, + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER + } + }, + {} +}; +#endif + +static struct pci_controller pci_hose[] = { + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc8349emds_config_table, +#endif + }, + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc8349emds_config_table, +#endif + } +}; + +/************************************************************************** + * + * pib_init() -- initialize the PCA9555PW IO expander on the PIB board + * + */ +void +pib_init(void) +{ + u8 val8, orig_i2c_bus; + /* + * Assign PIB PMC slot to desired PCI bus + */ + /* Switch temporarily to I2C bus #2 */ + orig_i2c_bus = i2c_get_bus_num(); + i2c_set_bus_num(1); + + val8 = 0; + i2c_write(0x23, 0x6, 1, &val8, 1); + i2c_write(0x23, 0x7, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x23, 0x2, 1, &val8, 1); + i2c_write(0x23, 0x3, 1, &val8, 1); + + val8 = 0; + i2c_write(0x26, 0x6, 1, &val8, 1); + val8 = 0x34; + i2c_write(0x26, 0x7, 1, &val8, 1); +#if defined(PCI_64BIT) + val8 = 0xf4; /* PMC2:PCI1/64-bit */ +#elif defined(PCI_ALL_PCI1) + val8 = 0xf3; /* PMC1:PCI1 PMC2:PCI1 PMC3:PCI1 */ +#elif defined(PCI_ONE_PCI1) + val8 = 0xf9; /* PMC1:PCI1 PMC2:PCI2 PMC3:PCI2 */ +#else + val8 = 0xf5; /* PMC1:PCI1 PMC2:PCI1 PMC3:PCI2 */ +#endif + i2c_write(0x26, 0x2, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x26, 0x3, 1, &val8, 1); + val8 = 0; + i2c_write(0x27, 0x6, 1, &val8, 1); + i2c_write(0x27, 0x7, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x27, 0x2, 1, &val8, 1); + val8 = 0xef; + i2c_write(0x27, 0x3, 1, &val8, 1); + asm("eieio"); + +#if defined(PCI_64BIT) + printf("PCI1: 64-bit on PMC2\n"); +#elif defined(PCI_ALL_PCI1) + printf("PCI1: 32-bit on PMC1, PMC2, PMC3\n"); +#elif defined(PCI_ONE_PCI1) + printf("PCI1: 32-bit on PMC1\n"); + printf("PCI2: 32-bit on PMC2, PMC3\n"); +#else + printf("PCI1: 32-bit on PMC1, PMC2\n"); + printf("PCI2: 32-bit on PMC3\n"); +#endif + /* Reset to original I2C bus */ + i2c_set_bus_num(orig_i2c_bus); +} + +/************************************************************************** + * pci_init_board() + * + * NOTICE: PCI2 is not currently supported + * + */ +void +pci_init_board(void) +{ + volatile immap_t * immr; + volatile clk83xx_t * clk; + volatile law83xx_t * pci_law; + volatile pot83xx_t * pci_pot; + volatile pcictrl83xx_t * pci_ctrl; + volatile pciconf83xx_t * pci_conf; + u16 reg16; + u32 reg32; + u32 dev; + struct pci_controller * hose; + + immr = (immap_t *)CFG_IMMR; + clk = (clk83xx_t *)&immr->clk; + pci_law = immr->sysconf.pcilaw; + pci_pot = immr->ios.pot; + pci_ctrl = immr->pci_ctrl; + pci_conf = immr->pci_conf; + + hose = &pci_hose[0]; + + pib_init(); + + /* + * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode + */ + + reg32 = clk->occr; + udelay(2000); + clk->occr = 0xff000000; + udelay(2000); + + /* + * Release PCI RST Output signal + */ + pci_ctrl[0].gcr = 0; + udelay(2000); + pci_ctrl[0].gcr = 1; + +#ifdef CONFIG_MPC83XX_PCI2 + pci_ctrl[1].gcr = 0; + udelay(2000); + pci_ctrl[1].gcr = 1; +#endif + + /* We need to wait at least a 1sec based on PCI specs */ + { + int i; + + for (i = 0; i < 1000; ++i) + udelay (1000); + } + + /* + * Configure PCI Local Access Windows + */ + pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR; + pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G; + + pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR; + pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_4M; + + /* + * Configure PCI Outbound Translation Windows + */ + + /* PCI1 mem space - prefetch */ + pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK; + pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[0].pocmr = POCMR_EN | POCMR_PREFETCH_EN | (POCMR_CM_256M & POCMR_CM_MASK); + + /* PCI1 IO space */ + pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[1].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); + + /* PCI1 mmio - non-prefetch mem space */ + pci_pot[2].potar = (CFG_PCI1_MMIO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[2].pobar = (CFG_PCI1_MMIO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[2].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK); + + /* + * Configure PCI Inbound Translation Windows + */ + + /* we need RAM mapped to PCI space for the devices to + * access main memory */ + pci_ctrl[0].pitar1 = 0x0; + pci_ctrl[0].pibar1 = 0x0; + pci_ctrl[0].piebar1 = 0x0; + pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1); + + hose->first_busno = 0; + hose->last_busno = 0xff; + + /* PCI memory prefetch space */ + pci_set_region(hose->regions + 0, + CFG_PCI1_MEM_BASE, + CFG_PCI1_MEM_PHYS, + CFG_PCI1_MEM_SIZE, + PCI_REGION_MEM|PCI_REGION_PREFETCH); + + /* PCI memory space */ + pci_set_region(hose->regions + 1, + CFG_PCI1_MMIO_BASE, + CFG_PCI1_MMIO_PHYS, + CFG_PCI1_MMIO_SIZE, + PCI_REGION_MEM); + + /* PCI IO space */ + pci_set_region(hose->regions + 2, + CFG_PCI1_IO_BASE, + CFG_PCI1_IO_PHYS, + CFG_PCI1_IO_SIZE, + PCI_REGION_IO); + + /* System memory space */ + pci_set_region(hose->regions + 3, + CONFIG_PCI_SYS_MEM_BUS, + CONFIG_PCI_SYS_MEM_PHYS, + gd->ram_size, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + hose->region_count = 4; + + pci_setup_indirect(hose, + (CFG_IMMR+0x8300), + (CFG_IMMR+0x8304)); + + pci_register_hose(hose); + + /* + * Write to Command register + */ + reg16 = 0xff; + dev = PCI_BDF(hose->first_busno, 0, 0); + pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); + pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); + pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); + +#ifdef CONFIG_PCI_SCAN_SHOW + printf("PCI: Bus Dev VenId DevId Class Int\n"); +#endif + /* + * Hose scan. + */ + hose->last_busno = pci_hose_scan(hose); + +#ifdef CONFIG_MPC83XX_PCI2 + hose = &pci_hose[1]; + + /* + * Configure PCI Outbound Translation Windows + */ + + /* PCI2 mem space - prefetch */ + pci_pot[3].potar = (CFG_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK; + pci_pot[3].pobar = (CFG_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[3].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_PREFETCH_EN | (POCMR_CM_256M & POCMR_CM_MASK); + + /* PCI2 IO space */ + pci_pot[4].potar = (CFG_PCI2_IO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[4].pobar = (CFG_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[4].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); + + /* PCI2 mmio - non-prefetch mem space */ + pci_pot[5].potar = (CFG_PCI2_MMIO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[5].pobar = (CFG_PCI2_MMIO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[5].pocmr = POCMR_EN | POCMR_PCI2 | (POCMR_CM_256M & POCMR_CM_MASK); + + /* + * Configure PCI Inbound Translation Windows + */ + + /* we need RAM mapped to PCI space for the devices to + * access main memory */ + pci_ctrl[1].pitar1 = 0x0; + pci_ctrl[1].pibar1 = 0x0; + pci_ctrl[1].piebar1 = 0x0; + pci_ctrl[1].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1); + + hose->first_busno = pci_hose[0].last_busno + 1; + hose->last_busno = 0xff; + + /* PCI memory prefetch space */ + pci_set_region(hose->regions + 0, + CFG_PCI2_MEM_BASE, + CFG_PCI2_MEM_PHYS, + CFG_PCI2_MEM_SIZE, + PCI_REGION_MEM|PCI_REGION_PREFETCH); + + /* PCI memory space */ + pci_set_region(hose->regions + 1, + CFG_PCI2_MMIO_BASE, + CFG_PCI2_MMIO_PHYS, + CFG_PCI2_MMIO_SIZE, + PCI_REGION_MEM); + + /* PCI IO space */ + pci_set_region(hose->regions + 2, + CFG_PCI2_IO_BASE, + CFG_PCI2_IO_PHYS, + CFG_PCI2_IO_SIZE, + PCI_REGION_IO); + + /* System memory space */ + pci_set_region(hose->regions + 3, + CONFIG_PCI_SYS_MEM_BUS, + CONFIG_PCI_SYS_MEM_PHYS, + gd->ram_size, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + hose->region_count = 4; + + pci_setup_indirect(hose, + (CFG_IMMR+0x8380), + (CFG_IMMR+0x8384)); + + pci_register_hose(hose); + + /* + * Write to Command register + */ + reg16 = 0xff; + dev = PCI_BDF(hose->first_busno, 0, 0); + pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); + pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); + pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); + + /* + * Hose scan. + */ + hose->last_busno = pci_hose_scan(hose); +#endif + +} + +#if defined(CONFIG_OF_LIBFDT) +void +ft_pci_setup(void *blob, bd_t *bd) +{ + int nodeoffset; + int err; + int tmp[2]; + + nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500"); + if (nodeoffset >= 0) { + tmp[0] = cpu_to_be32(pci_hose[0].first_busno); + tmp[1] = cpu_to_be32(pci_hose[0].last_busno); + err = fdt_setprop(blob, nodeoffset, "bus-range", + tmp, sizeof(tmp)); + + tmp[0] = cpu_to_be32(gd->pci_clk); + err = fdt_setprop(blob, nodeoffset, "clock-frequency", + tmp, sizeof(tmp[0])); + } +#ifdef CONFIG_MPC83XX_PCI2 + nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8600"); + if (nodeoffset >= 0) { + tmp[0] = cpu_to_be32(pci_hose[1].first_busno); + tmp[1] = cpu_to_be32(pci_hose[1].last_busno); + err = fdt_setprop(blob, nodeoffset, "bus-range", + tmp, sizeof(tmp)); + + tmp[0] = cpu_to_be32(gd->pci_clk); + err = fdt_setprop(blob, nodeoffset, "clock-frequency", + tmp, sizeof(tmp[0])); + } +#endif +} +#elif defined(CONFIG_OF_FLAT_TREE) +void +ft_pci_setup(void *blob, bd_t *bd) +{ + u32 *p; + int len; + + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len); + if (p != NULL) { + p[0] = pci_hose[0].first_busno; + p[1] = pci_hose[0].last_busno; + } + +#ifdef CONFIG_MPC83XX_PCI2 + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8600/bus-range", &len); + if (p != NULL) { + p[0] = pci_hose[1].first_busno; + p[1] = pci_hose[1].last_busno; + } +#endif +} +#endif /* CONFIG_OF_FLAT_TREE */ +#endif /* CONFIG_PCI */ diff --git a/board/freescale/mpc8349itx/Makefile b/board/freescale/mpc8349itx/Makefile new file mode 100644 index 00000000000..31bcdb8642a --- /dev/null +++ b/board/freescale/mpc8349itx/Makefile @@ -0,0 +1,48 @@ +# +# Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o pci.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) crv $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/mpc8349itx/config.mk b/board/freescale/mpc8349itx/config.mk new file mode 100644 index 00000000000..79f1765fa1b --- /dev/null +++ b/board/freescale/mpc8349itx/config.mk @@ -0,0 +1,31 @@ +# +# Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# MPC8349E-mITX and MPC8349E-mITX-GP +# + +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp + +ifndef TEXT_BASE +TEXT_BASE = 0xFEF00000 +endif diff --git a/board/freescale/mpc8349itx/mpc8349itx.c b/board/freescale/mpc8349itx/mpc8349itx.c new file mode 100644 index 00000000000..c82f7847a22 --- /dev/null +++ b/board/freescale/mpc8349itx/mpc8349itx.c @@ -0,0 +1,407 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_PCI +#include +#include +#endif + +#ifdef CONFIG_SPD_EEPROM +#include +#else +#include +#endif +#if defined(CONFIG_OF_FLAT_TREE) +#include +#elif defined(CONFIG_OF_LIBFDT) +#include +#endif + +#ifndef CONFIG_SPD_EEPROM +/************************************************************************* + * fixed sdram init -- doesn't use serial presence detect. + ************************************************************************/ +int fixed_sdram(void) +{ + volatile immap_t *im = (immap_t *) CFG_IMMR; + u32 ddr_size; /* The size of RAM, in bytes */ + u32 ddr_size_log2 = 0; + + for (ddr_size = CFG_DDR_SIZE * 0x100000; ddr_size > 1; ddr_size >>= 1) { + if (ddr_size & 1) { + return -1; + } + ddr_size_log2++; + } + + im->sysconf.ddrlaw[0].ar = + LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); + im->sysconf.ddrlaw[0].bar = (CFG_DDR_SDRAM_BASE >> 12) & 0xfffff; + + /* Only one CS0 for DDR */ + im->ddr.csbnds[0].csbnds = 0x0000000f; + im->ddr.cs_config[0] = CFG_DDR_CONFIG; + + debug("cs0_bnds = 0x%08x\n", im->ddr.csbnds[0].csbnds); + debug("cs0_config = 0x%08x\n", im->ddr.cs_config[0]); + + debug("DDR:bar=0x%08x\n", im->sysconf.ddrlaw[0].bar); + debug("DDR:ar=0x%08x\n", im->sysconf.ddrlaw[0].ar); + + im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;/* Was "2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT" */ + im->ddr.sdram_cfg = SDRAM_CFG_SREN | SDRAM_CFG_SDRAM_TYPE_DDR1; + im->ddr.sdram_mode = + (0x0000 << SDRAM_MODE_ESD_SHIFT) | (0x0032 << SDRAM_MODE_SD_SHIFT); + im->ddr.sdram_interval = + (0x0410 << SDRAM_INTERVAL_REFINT_SHIFT) | (0x0100 << + SDRAM_INTERVAL_BSTOPRE_SHIFT); + im->ddr.sdram_clk_cntl = CFG_DDR_SDRAM_CLK_CNTL; + + udelay(200); + + im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; + + debug("DDR:timing_cfg_1=0x%08x\n", im->ddr.timing_cfg_1); + debug("DDR:timing_cfg_2=0x%08x\n", im->ddr.timing_cfg_2); + debug("DDR:sdram_mode=0x%08x\n", im->ddr.sdram_mode); + debug("DDR:sdram_interval=0x%08x\n", im->ddr.sdram_interval); + debug("DDR:sdram_cfg=0x%08x\n", im->ddr.sdram_cfg); + + return CFG_DDR_SIZE; +} +#endif + +#ifdef CONFIG_PCI +/* + * Initialize PCI Devices, report devices found + */ +#ifndef CONFIG_PCI_PNP +static struct pci_config_table pci_mpc83xxmitx_config_table[] = { + { + PCI_ANY_ID, + PCI_ANY_ID, + PCI_ANY_ID, + PCI_ANY_ID, + 0x0f, + PCI_ANY_ID, + pci_cfgfunc_config_device, + { + PCI_ENET0_IOADDR, + PCI_ENET0_MEMADDR, + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER} + }, + {} +} +#endif + +volatile static struct pci_controller hose[] = { + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc83xxmitx_config_table, +#endif + }, + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc83xxmitx_config_table, +#endif + } +}; +#endif /* CONFIG_PCI */ + +long int initdram(int board_type) +{ + volatile immap_t *im = (immap_t *) CFG_IMMR; + u32 msize = 0; +#ifdef CONFIG_DDR_ECC + volatile ddr83xx_t *ddr = &im->ddr; +#endif + + if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) + return -1; + + /* DDR SDRAM - Main SODIMM */ + im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; +#ifdef CONFIG_SPD_EEPROM + msize = spd_sdram(); +#else + msize = fixed_sdram(); +#endif + +#ifdef CONFIG_DDR_ECC + if (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) + /* Unlike every other board, on the 83xx spd_sdram() returns + megabytes instead of just bytes. That's why we need to + multiple by 1MB when calling ddr_enable_ecc(). */ + ddr_enable_ecc(msize * 1048576); +#endif + + /* return total bus RAM size(bytes) */ + return msize * 1024 * 1024; +} + +int checkboard(void) +{ +#ifdef CONFIG_MPC8349ITX + puts("Board: Freescale MPC8349E-mITX\n"); +#else + puts("Board: Freescale MPC8349E-mITX-GP\n"); +#endif + + return 0; +} + +/* + * Implement a work-around for a hardware problem with compact + * flash. + * + * Program the UPM if compact flash is enabled. + */ +int misc_init_f(void) +{ +#ifdef CONFIG_VSC7385 + volatile u32 *vsc7385_cpuctrl; + + /* 0x1c0c0 is the VSC7385 CPU Control (CPUCTRL) Register. The power up + default of VSC7385 L1_IRQ and L2_IRQ requests are active high. That + means it is 0 when the IRQ is not active. This makes the wire-AND + logic always assert IRQ7 to CPU even if there is no request from the + switch. Since the compact flash and the switch share the same IRQ, + the Linux kernel will think that the compact flash is requesting irq + and get stuck when it tries to clear the IRQ. Thus we need to set + the L2_IRQ0 and L2_IRQ1 to active low. + + The following code sets the L1_IRQ and L2_IRQ polarity to active low. + Without this code, compact flash will not work in Linux because + unlike U-Boot, Linux uses the IRQ, so this code is necessary if we + don't enable compact flash for U-Boot. + */ + + vsc7385_cpuctrl = (volatile u32 *)(CFG_VSC7385_BASE + 0x1c0c0); + *vsc7385_cpuctrl |= 0x0c; +#endif + +#ifdef CONFIG_COMPACT_FLASH + /* UPM Table Configuration Code */ + static uint UPMATable[] = { + 0xcffffc00, 0x0fffff00, 0x0fafff00, 0x0fafff00, + 0x0faffd00, 0x0faffc04, 0x0ffffc00, 0x3ffffc01, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfff7fc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, + 0xcffffc00, 0x0fffff00, 0x0ff3ff00, 0x0ff3ff00, + 0x0ff3fe00, 0x0ffffc00, 0x3ffffc05, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01 + }; + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile lbus83xx_t *lbus = &immap->lbus; + + lbus->bank[3].br = CFG_BR3_PRELIM; + lbus->bank[3].or = CFG_OR3_PRELIM; + + /* Program the MAMR. RFEN=0, OP=00, UWPL=1, AM=000, DS=01, G0CL=000, + GPL4=0, RLF=0001, WLF=0001, TLF=0001, MAD=000000 + */ + lbus->mamr = 0x08404440; + + upmconfig(0, UPMATable, sizeof(UPMATable) / sizeof(UPMATable[0])); + + puts("UPMA: Configured for compact flash\n"); +#endif + + return 0; +} + +/* + * Make sure the EEPROM has the HRCW correctly programmed. + * Make sure the RTC is correctly programmed. + * + * The MPC8349E-mITX can be configured to load the HRCW from + * EEPROM instead of flash. This is controlled via jumpers + * LGPL0, 1, and 3. Normally, these jumpers are set to 000 (all + * jumpered), but if they're set to 001 or 010, then the HRCW is + * read from the "I2C EEPROM". + * + * This function makes sure that the I2C EEPROM is programmed + * correctly. + */ +int misc_init_r(void) +{ + int rc = 0; + +#ifdef CONFIG_HARD_I2C + + unsigned int orig_bus = i2c_get_bus_num(); + u8 i2c_data; + +#ifdef CFG_I2C_RTC_ADDR + u8 ds1339_data[17]; +#endif + +#ifdef CFG_I2C_EEPROM_ADDR + static u8 eeprom_data[] = /* HRCW data */ + { + 0xAA, 0x55, 0xAA, /* Preamble */ + 0x7C, /* ACS=0, BYTE_EN=1111, CONT=1 */ + 0x02, 0x40, /* RCWL ADDR=0x0_0900 */ + (CFG_HRCW_LOW >> 24) & 0xFF, + (CFG_HRCW_LOW >> 16) & 0xFF, + (CFG_HRCW_LOW >> 8) & 0xFF, + CFG_HRCW_LOW & 0xFF, + 0x7C, /* ACS=0, BYTE_EN=1111, CONT=1 */ + 0x02, 0x41, /* RCWH ADDR=0x0_0904 */ + (CFG_HRCW_HIGH >> 24) & 0xFF, + (CFG_HRCW_HIGH >> 16) & 0xFF, + (CFG_HRCW_HIGH >> 8) & 0xFF, + CFG_HRCW_HIGH & 0xFF + }; + + u8 data[sizeof(eeprom_data)]; +#endif + + printf("Board revision: "); + i2c_set_bus_num(1); + if (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0) + printf("%u.%u (PCF8475A)\n", (i2c_data & 0x02) >> 1, i2c_data & 0x01); + else if (i2c_read(CFG_I2C_8574_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0) + printf("%u.%u (PCF8475)\n", (i2c_data & 0x02) >> 1, i2c_data & 0x01); + else { + printf("Unknown\n"); + rc = 1; + } + +#ifdef CFG_I2C_EEPROM_ADDR + i2c_set_bus_num(0); + + if (i2c_read(CFG_I2C_EEPROM_ADDR, 0, 2, data, sizeof(data)) == 0) { + if (memcmp(data, eeprom_data, sizeof(data)) != 0) { + if (i2c_write + (CFG_I2C_EEPROM_ADDR, 0, 2, eeprom_data, + sizeof(eeprom_data)) != 0) { + puts("Failure writing the HRCW to EEPROM via I2C.\n"); + rc = 1; + } + } + } else { + puts("Failure reading the HRCW from EEPROM via I2C.\n"); + rc = 1; + } +#endif + +#ifdef CFG_I2C_RTC_ADDR + i2c_set_bus_num(1); + + if (i2c_read(CFG_I2C_RTC_ADDR, 0, 1, ds1339_data, sizeof(ds1339_data)) + == 0) { + + /* Work-around for MPC8349E-mITX bug #13601. + If the RTC does not contain valid register values, the DS1339 + Linux driver will not work. + */ + + /* Make sure status register bits 6-2 are zero */ + ds1339_data[0x0f] &= ~0x7c; + + /* Check for a valid day register value */ + ds1339_data[0x03] &= ~0xf8; + if (ds1339_data[0x03] == 0) { + ds1339_data[0x03] = 1; + } + + /* Check for a valid date register value */ + ds1339_data[0x04] &= ~0xc0; + if ((ds1339_data[0x04] == 0) || + ((ds1339_data[0x04] & 0x0f) > 9) || + (ds1339_data[0x04] >= 0x32)) { + ds1339_data[0x04] = 1; + } + + /* Check for a valid month register value */ + ds1339_data[0x05] &= ~0x60; + + if ((ds1339_data[0x05] == 0) || + ((ds1339_data[0x05] & 0x0f) > 9) || + ((ds1339_data[0x05] >= 0x13) + && (ds1339_data[0x05] <= 0x19))) { + ds1339_data[0x05] = 1; + } + + /* Enable Oscillator and rate select */ + ds1339_data[0x0e] = 0x1c; + + /* Work-around for MPC8349E-mITX bug #13330. + Ensure that the RTC control register contains the value 0x1c. + This affects SATA performance. + */ + + if (i2c_write + (CFG_I2C_RTC_ADDR, 0, 1, ds1339_data, + sizeof(ds1339_data))) { + puts("Failure writing to the RTC via I2C.\n"); + rc = 1; + } + } else { + puts("Failure reading from the RTC via I2C.\n"); + rc = 1; + } +#endif + + i2c_set_bus_num(orig_bus); +#endif + + return rc; +} + +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ +#if defined(CONFIG_OF_FLAT_TREE) + u32 *p; + int len; + + p = ft_get_prop(blob, "/memory/reg", &len); + if (p != NULL) { + *p++ = cpu_to_be32(bd->bi_memstart); + *p = cpu_to_be32(bd->bi_memsize); + } +#endif + ft_cpu_setup(blob, bd); +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif +} +#endif diff --git a/board/freescale/mpc8349itx/pci.c b/board/freescale/mpc8349itx/pci.c new file mode 100644 index 00000000000..5ca094d4cbc --- /dev/null +++ b/board/freescale/mpc8349itx/pci.c @@ -0,0 +1,392 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +#ifdef CONFIG_PCI + +#include +#include +#include +#include +#include +#if defined(CONFIG_OF_FLAT_TREE) +#include +#elif defined(CONFIG_OF_LIBFDT) +#include +#endif + +DECLARE_GLOBAL_DATA_PTR; + +/* System RAM mapped to PCI space */ +#define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE +#define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE + +#ifndef CONFIG_PCI_PNP +static struct pci_config_table pci_mpc8349itx_config_table[] = { + { + PCI_ANY_ID, + PCI_ANY_ID, + PCI_ANY_ID, + PCI_ANY_ID, + PCI_IDSEL_NUMBER, + PCI_ANY_ID, + pci_cfgfunc_config_device, + { + PCI_ENET0_IOADDR, + PCI_ENET0_MEMADDR, + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER} + }, + {} +}; +#endif + +static struct pci_controller pci_hose[] = { + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc8349itx_config_table, +#endif + }, + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc8349itx_config_table, +#endif + } +}; + +/************************************************************************** + * pci_init_board() + * + * NOTICE: PCI2 is not currently supported + * + */ +void pci_init_board(void) +{ + volatile immap_t *immr; + volatile clk83xx_t *clk; + volatile law83xx_t *pci_law; + volatile pot83xx_t *pci_pot; + volatile pcictrl83xx_t *pci_ctrl; + volatile pciconf83xx_t *pci_conf; + u8 reg8; + u16 reg16; + u32 reg32; + u32 dev; + struct pci_controller *hose; + + immr = (immap_t *) CFG_IMMR; + clk = (clk83xx_t *) & immr->clk; + pci_law = immr->sysconf.pcilaw; + pci_pot = immr->ios.pot; + pci_ctrl = immr->pci_ctrl; + pci_conf = immr->pci_conf; + + hose = &pci_hose[0]; + + /* + * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode + */ + + reg32 = clk->occr; + udelay(2000); + +#ifdef CONFIG_HARD_I2C + i2c_set_bus_num(1); + /* Read the PCI_M66EN jumper setting */ + if ((i2c_read(CFG_I2C_8574_ADDR2, 0, 0, ®8, sizeof(reg8)) == 0) || + (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, ®8, sizeof(reg8)) == 0)) { + if (reg8 & I2C_8574_PCI66) + clk->occr = 0xff000000; /* 66 MHz PCI */ + else + clk->occr = 0xff600001; /* 33 MHz PCI */ + } else { + clk->occr = 0xff600001; /* 33 MHz PCI */ + } +#else + clk->occr = 0xff000000; /* 66 MHz PCI */ +#endif + + udelay(2000); + + /* + * Release PCI RST Output signal + */ + pci_ctrl[0].gcr = 0; + udelay(2000); + pci_ctrl[0].gcr = 1; + +#ifdef CONFIG_MPC83XX_PCI2 + pci_ctrl[1].gcr = 0; + udelay(2000); + pci_ctrl[1].gcr = 1; +#endif + + /* We need to wait at least a 1sec based on PCI specs */ + { + int i; + + for (i = 0; i < 1000; i++) + udelay(1000); + } + + /* + * Configure PCI Local Access Windows + */ + pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR; + pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G; + + pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR; + pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_32M; + + /* + * Configure PCI Outbound Translation Windows + */ + + /* PCI1 mem space - prefetch */ + pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK; + pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[0].pocmr = POCMR_EN | POCMR_PREFETCH_EN | POCMR_CM_256M; + + /* PCI1 IO space */ + pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[1].pocmr = POCMR_EN | POCMR_IO | POCMR_CM_16M; + + /* PCI1 mmio - non-prefetch mem space */ + pci_pot[2].potar = (CFG_PCI1_MMIO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[2].pobar = (CFG_PCI1_MMIO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[2].pocmr = POCMR_EN | POCMR_CM_256M; + + /* + * Configure PCI Inbound Translation Windows + */ + + /* we need RAM mapped to PCI space for the devices to + * access main memory */ + pci_ctrl[0].pitar1 = 0x0; + pci_ctrl[0].pibar1 = 0x0; + pci_ctrl[0].piebar1 = 0x0; + pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | + PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1); + + hose->first_busno = 0; + hose->last_busno = 0xff; + + /* PCI memory prefetch space */ + pci_set_region(hose->regions + 0, + CFG_PCI1_MEM_BASE, + CFG_PCI1_MEM_PHYS, + CFG_PCI1_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); + + /* PCI memory space */ + pci_set_region(hose->regions + 1, + CFG_PCI1_MMIO_BASE, + CFG_PCI1_MMIO_PHYS, CFG_PCI1_MMIO_SIZE, PCI_REGION_MEM); + + /* PCI IO space */ + pci_set_region(hose->regions + 2, + CFG_PCI1_IO_BASE, + CFG_PCI1_IO_PHYS, CFG_PCI1_IO_SIZE, PCI_REGION_IO); + + /* System memory space */ + pci_set_region(hose->regions + 3, + CONFIG_PCI_SYS_MEM_BUS, + CONFIG_PCI_SYS_MEM_PHYS, + gd->ram_size, PCI_REGION_MEM | PCI_REGION_MEMORY); + + hose->region_count = 4; + + pci_setup_indirect(hose, + (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); + + pci_register_hose(hose); + + /* + * Write to Command register + */ + reg16 = 0xff; + dev = PCI_BDF(hose->first_busno, 0, 0); + pci_hose_read_config_word(hose, dev, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); + pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); + pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); + +#ifdef CONFIG_PCI_SCAN_SHOW + printf("PCI: Bus Dev VenId DevId Class Int\n"); +#endif + /* + * Hose scan. + */ + hose->last_busno = pci_hose_scan(hose); + +#ifdef CONFIG_MPC83XX_PCI2 + hose = &pci_hose[1]; + + /* + * Configure PCI Outbound Translation Windows + */ + + /* PCI2 mem space - prefetch */ + pci_pot[3].potar = (CFG_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK; + pci_pot[3].pobar = (CFG_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[3].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_PREFETCH_EN | POCMR_CM_256M; + + /* PCI2 IO space */ + pci_pot[4].potar = (CFG_PCI2_IO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[4].pobar = (CFG_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[4].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_IO | POCMR_CM_16M; + + /* PCI2 mmio - non-prefetch mem space */ + pci_pot[5].potar = (CFG_PCI2_MMIO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[5].pobar = (CFG_PCI2_MMIO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[5].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_CM_256M; + + /* + * Configure PCI Inbound Translation Windows + */ + + /* we need RAM mapped to PCI space for the devices to + * access main memory */ + pci_ctrl[1].pitar1 = 0x0; + pci_ctrl[1].pibar1 = 0x0; + pci_ctrl[1].piebar1 = 0x0; + pci_ctrl[1].piwar1 = + PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | + (__ilog2(gd->ram_size) - 1); + + hose->first_busno = pci_hose[0].last_busno + 1; + hose->last_busno = 0xff; + + /* PCI memory prefetch space */ + pci_set_region(hose->regions + 0, + CFG_PCI2_MEM_BASE, + CFG_PCI2_MEM_PHYS, + CFG_PCI2_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); + + /* PCI memory space */ + pci_set_region(hose->regions + 1, + CFG_PCI2_MMIO_BASE, + CFG_PCI2_MMIO_PHYS, CFG_PCI2_MMIO_SIZE, PCI_REGION_MEM); + + /* PCI IO space */ + pci_set_region(hose->regions + 2, + CFG_PCI2_IO_BASE, + CFG_PCI2_IO_PHYS, CFG_PCI2_IO_SIZE, PCI_REGION_IO); + + /* System memory space */ + pci_set_region(hose->regions + 3, + CONFIG_PCI_SYS_MEM_BUS, + CONFIG_PCI_SYS_MEM_PHYS, + gd->ram_size, PCI_REGION_MEM | PCI_REGION_MEMORY); + + hose->region_count = 4; + + pci_setup_indirect(hose, + (CFG_IMMR + 0x8380), (CFG_IMMR + 0x8384)); + + pci_register_hose(hose); + + /* + * Write to Command register + */ + reg16 = 0xff; + dev = PCI_BDF(hose->first_busno, 0, 0); + pci_hose_read_config_word(hose, dev, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); + pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); + pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); + + /* + * Hose scan. + */ + hose->last_busno = pci_hose_scan(hose); +#endif +} + +#if defined(CONFIG_OF_LIBFDT) +void +ft_pci_setup(void *blob, bd_t *bd) +{ + int nodeoffset; + int err; + int tmp[2]; + + nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500"); + if (nodeoffset >= 0) { + tmp[0] = cpu_to_be32(pci_hose[0].first_busno); + tmp[1] = cpu_to_be32(pci_hose[0].last_busno); + err = fdt_setprop(blob, nodeoffset, "bus-range", + tmp, sizeof(tmp)); + + tmp[0] = cpu_to_be32(gd->pci_clk); + err = fdt_setprop(blob, nodeoffset, "clock-frequency", + tmp, sizeof(tmp[0])); + } +#ifdef CONFIG_MPC83XX_PCI2 + nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500"); + if (nodeoffset >= 0) { + tmp[0] = cpu_to_be32(pci_hose[1].first_busno); + tmp[1] = cpu_to_be32(pci_hose[1].last_busno); + err = fdt_setprop(blob, nodeoffset, "bus-range", + tmp, sizeof(tmp)); + + tmp[0] = cpu_to_be32(gd->pci_clk); + err = fdt_setprop(blob, nodeoffset, "clock-frequency", + tmp, sizeof(tmp[0])); + } +#endif +} +#elif defined(CONFIG_OF_FLAT_TREE) +void +ft_pci_setup(void *blob, bd_t *bd) +{ + u32 *p; + int len; + + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len); + if (p != NULL) { + p[0] = pci_hose[0].first_busno; + p[1] = pci_hose[0].last_busno; + } + +#ifdef CONFIG_MPC83XX_PCI2 + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8600/bus-range", &len); + if (p != NULL) { + p[0] = pci_hose[1].first_busno; + p[1] = pci_hose[1].last_busno; + } +#endif +} +#endif /* CONFIG_OF_FLAT_TREE */ +#endif /* CONFIG_PCI */ diff --git a/board/freescale/mpc8360emds/Makefile b/board/freescale/mpc8360emds/Makefile new file mode 100644 index 00000000000..ea52484c063 --- /dev/null +++ b/board/freescale/mpc8360emds/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o pci.o ../common/pq-mds-pib.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/mpc8360emds/config.mk b/board/freescale/mpc8360emds/config.mk new file mode 100644 index 00000000000..9ace8860cfd --- /dev/null +++ b/board/freescale/mpc8360emds/config.mk @@ -0,0 +1,28 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# MPC8360EMDS +# + +TEXT_BASE = 0xFE000000 diff --git a/board/freescale/mpc8360emds/mpc8360emds.c b/board/freescale/mpc8360emds/mpc8360emds.c new file mode 100644 index 00000000000..e050cd4395a --- /dev/null +++ b/board/freescale/mpc8360emds/mpc8360emds.c @@ -0,0 +1,313 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * Dave Liu + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#if defined(CONFIG_PCI) +#include +#endif +#if defined(CONFIG_SPD_EEPROM) +#include +#else +#include +#endif +#if defined(CONFIG_OF_FLAT_TREE) +#include +#elif defined(CONFIG_OF_LIBFDT) +#include +#endif +#if defined(CONFIG_PQ_MDS_PIB) +#include "../common/pq-mds-pib.h" +#endif + +const qe_iop_conf_t qe_iop_conf_tab[] = { + /* GETH1 */ + {0, 3, 1, 0, 1}, /* TxD0 */ + {0, 4, 1, 0, 1}, /* TxD1 */ + {0, 5, 1, 0, 1}, /* TxD2 */ + {0, 6, 1, 0, 1}, /* TxD3 */ + {1, 6, 1, 0, 3}, /* TxD4 */ + {1, 7, 1, 0, 1}, /* TxD5 */ + {1, 9, 1, 0, 2}, /* TxD6 */ + {1, 10, 1, 0, 2}, /* TxD7 */ + {0, 9, 2, 0, 1}, /* RxD0 */ + {0, 10, 2, 0, 1}, /* RxD1 */ + {0, 11, 2, 0, 1}, /* RxD2 */ + {0, 12, 2, 0, 1}, /* RxD3 */ + {0, 13, 2, 0, 1}, /* RxD4 */ + {1, 1, 2, 0, 2}, /* RxD5 */ + {1, 0, 2, 0, 2}, /* RxD6 */ + {1, 4, 2, 0, 2}, /* RxD7 */ + {0, 7, 1, 0, 1}, /* TX_EN */ + {0, 8, 1, 0, 1}, /* TX_ER */ + {0, 15, 2, 0, 1}, /* RX_DV */ + {0, 16, 2, 0, 1}, /* RX_ER */ + {0, 0, 2, 0, 1}, /* RX_CLK */ + {2, 9, 1, 0, 3}, /* GTX_CLK - CLK10 */ + {2, 8, 2, 0, 1}, /* GTX125 - CLK9 */ + /* GETH2 */ + {0, 17, 1, 0, 1}, /* TxD0 */ + {0, 18, 1, 0, 1}, /* TxD1 */ + {0, 19, 1, 0, 1}, /* TxD2 */ + {0, 20, 1, 0, 1}, /* TxD3 */ + {1, 2, 1, 0, 1}, /* TxD4 */ + {1, 3, 1, 0, 2}, /* TxD5 */ + {1, 5, 1, 0, 3}, /* TxD6 */ + {1, 8, 1, 0, 3}, /* TxD7 */ + {0, 23, 2, 0, 1}, /* RxD0 */ + {0, 24, 2, 0, 1}, /* RxD1 */ + {0, 25, 2, 0, 1}, /* RxD2 */ + {0, 26, 2, 0, 1}, /* RxD3 */ + {0, 27, 2, 0, 1}, /* RxD4 */ + {1, 12, 2, 0, 2}, /* RxD5 */ + {1, 13, 2, 0, 3}, /* RxD6 */ + {1, 11, 2, 0, 2}, /* RxD7 */ + {0, 21, 1, 0, 1}, /* TX_EN */ + {0, 22, 1, 0, 1}, /* TX_ER */ + {0, 29, 2, 0, 1}, /* RX_DV */ + {0, 30, 2, 0, 1}, /* RX_ER */ + {0, 31, 2, 0, 1}, /* RX_CLK */ + {2, 2, 1, 0, 2}, /* GTX_CLK = CLK10 */ + {2, 3, 2, 0, 1}, /* GTX125 - CLK4 */ + + {0, 1, 3, 0, 2}, /* MDIO */ + {0, 2, 1, 0, 1}, /* MDC */ + + {0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */ +}; + +int board_early_init_f(void) +{ + + u8 *bcsr = (u8 *)CFG_BCSR; + const immap_t *immr = (immap_t *)CFG_IMMR; + + /* Enable flash write */ + bcsr[0xa] &= ~0x04; + + /* Disable G1TXCLK, G2TXCLK h/w buffers (rev.2 h/w bug workaround) */ + if (immr->sysconf.spridr == SPR_8360_REV20 || + immr->sysconf.spridr == SPR_8360E_REV20 || + immr->sysconf.spridr == SPR_8360_REV21 || + immr->sysconf.spridr == SPR_8360E_REV21) + bcsr[0xe] = 0x30; + + return 0; +} + +int board_early_init_r(void) +{ +#ifdef CONFIG_PQ_MDS_PIB + pib_init(); +#endif + return 0; +} + +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) +extern void ddr_enable_ecc(unsigned int dram_size); +#endif +int fixed_sdram(void); +void sdram_init(void); + +long int initdram(int board_type) +{ + volatile immap_t *im = (immap_t *) CFG_IMMR; + u32 msize = 0; + + if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) + return -1; + + /* DDR SDRAM - Main SODIMM */ + im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; +#if defined(CONFIG_SPD_EEPROM) + msize = spd_sdram(); +#else + msize = fixed_sdram(); +#endif + +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) + /* + * Initialize DDR ECC byte + */ + ddr_enable_ecc(msize * 1024 * 1024); +#endif + /* + * Initialize SDRAM if it is on local bus. + */ + sdram_init(); + + /* return total bus SDRAM size(bytes) -- DDR */ + return (msize * 1024 * 1024); +} + +#if !defined(CONFIG_SPD_EEPROM) +/************************************************************************* + * fixed sdram init -- doesn't use serial presence detect. + ************************************************************************/ +int fixed_sdram(void) +{ + volatile immap_t *im = (immap_t *) CFG_IMMR; + u32 msize = 0; + u32 ddr_size; + u32 ddr_size_log2; + + msize = CFG_DDR_SIZE; + for (ddr_size = msize << 20, ddr_size_log2 = 0; + (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) { + if (ddr_size & 1) { + return -1; + } + } + im->sysconf.ddrlaw[0].ar = + LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); +#if (CFG_DDR_SIZE != 256) +#warning Currenly any ddr size other than 256 is not supported +#endif +#ifdef CONFIG_DDR_II + im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS; + im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG; + im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; + im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; + im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; + im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG; + im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2; + im->ddr.sdram_mode = CFG_DDR_MODE; + im->ddr.sdram_mode2 = CFG_DDR_MODE2; + im->ddr.sdram_interval = CFG_DDR_INTERVAL; + im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL; +#else + im->ddr.csbnds[0].csbnds = 0x00000007; + im->ddr.csbnds[1].csbnds = 0x0008000f; + + im->ddr.cs_config[0] = CFG_DDR_CONFIG; + im->ddr.cs_config[1] = CFG_DDR_CONFIG; + + im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; + im->ddr.sdram_cfg = CFG_DDR_CONTROL; + + im->ddr.sdram_mode = CFG_DDR_MODE; + im->ddr.sdram_interval = CFG_DDR_INTERVAL; +#endif + udelay(200); + im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; + + return msize; +} +#endif /*!CFG_SPD_EEPROM */ + +int checkboard(void) +{ + puts("Board: Freescale MPC8360EMDS\n"); + return 0; +} + +/* + * if MPC8360EMDS is soldered with SDRAM + */ +#if defined(CFG_BR2_PRELIM) \ + && defined(CFG_OR2_PRELIM) \ + && defined(CFG_LBLAWBAR2_PRELIM) \ + && defined(CFG_LBLAWAR2_PRELIM) +/* + * Initialize SDRAM memory on the Local Bus. + */ + +void sdram_init(void) +{ + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile lbus83xx_t *lbc = &immap->lbus; + uint *sdram_addr = (uint *) CFG_LBC_SDRAM_BASE; + + /* + * Setup SDRAM Base and Option Registers, already done in cpu_init.c + */ + /*setup mtrpt, lsrt and lbcr for LB bus */ + lbc->lbcr = CFG_LBC_LBCR; + lbc->mrtpr = CFG_LBC_MRTPR; + lbc->lsrt = CFG_LBC_LSRT; + asm("sync"); + + /* + * Configure the SDRAM controller Machine Mode Register. + */ + lbc->lsdmr = CFG_LBC_LSDMR_5; /* Normal Operation */ + lbc->lsdmr = CFG_LBC_LSDMR_1; /* Precharge All Banks */ + asm("sync"); + *sdram_addr = 0xff; + udelay(100); + + /* + * We need do 8 times auto refresh operation. + */ + lbc->lsdmr = CFG_LBC_LSDMR_2; + asm("sync"); + *sdram_addr = 0xff; /* 1 times */ + udelay(100); + *sdram_addr = 0xff; /* 2 times */ + udelay(100); + *sdram_addr = 0xff; /* 3 times */ + udelay(100); + *sdram_addr = 0xff; /* 4 times */ + udelay(100); + *sdram_addr = 0xff; /* 5 times */ + udelay(100); + *sdram_addr = 0xff; /* 6 times */ + udelay(100); + *sdram_addr = 0xff; /* 7 times */ + udelay(100); + *sdram_addr = 0xff; /* 8 times */ + udelay(100); + + /* Mode register write operation */ + lbc->lsdmr = CFG_LBC_LSDMR_4; + asm("sync"); + *(sdram_addr + 0xcc) = 0xff; + udelay(100); + + /* Normal operation */ + lbc->lsdmr = CFG_LBC_LSDMR_5 | 0x40000000; + asm("sync"); + *sdram_addr = 0xff; + udelay(100); +} +#else +void sdram_init(void) +{ +} +#endif + +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ +#if defined(CONFIG_OF_FLAT_TREE) + u32 *p; + int len; + + p = ft_get_prop(blob, "/memory/reg", &len); + if (p != NULL) { + *p++ = cpu_to_be32(bd->bi_memstart); + *p = cpu_to_be32(bd->bi_memsize); + } +#endif + ft_cpu_setup(blob, bd); +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif +} +#endif diff --git a/board/freescale/mpc8360emds/pci.c b/board/freescale/mpc8360emds/pci.c new file mode 100644 index 00000000000..cf7ef90443f --- /dev/null +++ b/board/freescale/mpc8360emds/pci.c @@ -0,0 +1,298 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +/* + * PCI Configuration space access support for MPC83xx PCI Bridge + */ +#include +#include +#include +#include +#include +#if defined(CONFIG_OF_FLAT_TREE) +#include +#elif defined(CONFIG_OF_LIBFDT) +#include +#endif + +#include + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_PCI) +#define PCI_FUNCTION_CONFIG 0x44 +#define PCI_FUNCTION_CFG_LOCK 0x20 + +/* + * Initialize PCI Devices, report devices found + */ +#ifndef CONFIG_PCI_PNP +static struct pci_config_table pci_mpc83xxemds_config_table[] = { + { + PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + pci_cfgfunc_config_device, + {PCI_ENET0_IOADDR, + PCI_ENET0_MEMADDR, + PCI_COMMON_MEMORY | PCI_COMMAND_MASTER} + }, + {} +} +#endif +static struct pci_controller hose[] = { + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc83xxemds_config_table, +#endif + }, +}; + +/********************************************************************** + * pci_init_board() + *********************************************************************/ +void pci_init_board(void) +#ifdef CONFIG_PCISLAVE +{ + u16 reg16; + volatile immap_t *immr; + volatile law83xx_t *pci_law; + volatile pot83xx_t *pci_pot; + volatile pcictrl83xx_t *pci_ctrl; + volatile pciconf83xx_t *pci_conf; + + immr = (immap_t *) CFG_IMMR; + pci_law = immr->sysconf.pcilaw; + pci_pot = immr->ios.pot; + pci_ctrl = immr->pci_ctrl; + pci_conf = immr->pci_conf; + /* + * Configure PCI Inbound Translation Windows + */ + pci_ctrl[0].pitar0 = 0x0; + pci_ctrl[0].pibar0 = 0x0; + pci_ctrl[0].piwar0 = PIWAR_EN | PIWAR_RTT_SNOOP | + PIWAR_WTT_SNOOP | PIWAR_IWS_4K; + + pci_ctrl[0].pitar1 = 0x0; + pci_ctrl[0].pibar1 = 0x0; + pci_ctrl[0].piebar1 = 0x0; + pci_ctrl[0].piwar1 &= ~PIWAR_EN; + + pci_ctrl[0].pitar2 = 0x0; + pci_ctrl[0].pibar2 = 0x0; + pci_ctrl[0].piebar2 = 0x0; + pci_ctrl[0].piwar2 &= ~PIWAR_EN; + + hose[0].first_busno = 0; + hose[0].last_busno = 0xff; + pci_setup_indirect(&hose[0], + (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); + reg16 = 0xff; + + pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_STATUS, 0xffff); + pci_hose_write_config_byte(&hose[0], PCI_BDF(0, 0, 0), + PCI_LATENCY_TIMER, 0x80); + + /* + * Unlock configuration lock in PCI function configuration register. + */ + pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_FUNCTION_CONFIG, ®16); + reg16 &= ~(PCI_FUNCTION_CFG_LOCK); + pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_FUNCTION_CONFIG, reg16); + + printf("Enabled PCI 32bit Agent Mode\n"); +} +#else +{ + volatile immap_t *immr; + volatile clk83xx_t *clk; + volatile law83xx_t *pci_law; + volatile pot83xx_t *pci_pot; + volatile pcictrl83xx_t *pci_ctrl; + volatile pciconf83xx_t *pci_conf; + + u16 reg16; + u32 val32; + u32 dev; + + immr = (immap_t *) CFG_IMMR; + clk = (clk83xx_t *) & immr->clk; + pci_law = immr->sysconf.pcilaw; + pci_pot = immr->ios.pot; + pci_ctrl = immr->pci_ctrl; + pci_conf = immr->pci_conf; + /* + * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode + */ + val32 = clk->occr; + udelay(2000); +#if defined(PCI_66M) + clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2; + printf("PCI clock is 66MHz\n"); +#elif defined(PCI_33M) + clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 | + OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICR; + printf("PCI clock is 33MHz\n"); +#else + clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2; + printf("PCI clock is 66MHz\n"); +#endif + udelay(2000); + + /* + * Configure PCI Local Access Windows + */ + pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR; + pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M; + + pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR; + pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_1M; + + /* + * Configure PCI Outbound Translation Windows + */ + + /* PCI mem space - prefetch */ + pci_pot[0].potar = (CFG_PCI_MEM_BASE >> 12) & POTAR_TA_MASK; + pci_pot[0].pobar = (CFG_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[0].pocmr = + POCMR_EN | POCMR_SE | (POCMR_CM_256M & POCMR_CM_MASK); + + /* PCI mmio - non-prefetch mem space */ + pci_pot[1].potar = (CFG_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[1].pobar = (CFG_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[1].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK); + + /* PCI IO space */ + pci_pot[2].potar = (CFG_PCI_IO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[2].pobar = (CFG_PCI_IO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[2].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); + + /* + * Configure PCI Inbound Translation Windows + */ + pci_ctrl[0].pitar1 = (CFG_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK; + pci_ctrl[0].pibar1 = (CFG_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK; + pci_ctrl[0].piebar1 = 0x0; + pci_ctrl[0].piwar1 = + PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | + PIWAR_IWS_2G; + + /* + * Release PCI RST Output signal + */ + udelay(2000); + pci_ctrl[0].gcr = 1; + udelay(2000); + + hose[0].first_busno = 0; + hose[0].last_busno = 0xff; + + /* PCI memory prefetch space */ + pci_set_region(hose[0].regions + 0, + CFG_PCI_MEM_BASE, + CFG_PCI_MEM_PHYS, + CFG_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); + + /* PCI memory space */ + pci_set_region(hose[0].regions + 1, + CFG_PCI_MMIO_BASE, + CFG_PCI_MMIO_PHYS, CFG_PCI_MMIO_SIZE, PCI_REGION_MEM); + + /* PCI IO space */ + pci_set_region(hose[0].regions + 2, + CFG_PCI_IO_BASE, + CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO); + + /* System memory space */ + pci_set_region(hose[0].regions + 3, + CFG_PCI_SLV_MEM_LOCAL, + CFG_PCI_SLV_MEM_BUS, + CFG_PCI_SLV_MEM_SIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + hose[0].region_count = 4; + + pci_setup_indirect(&hose[0], + (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); + + pci_register_hose(hose); + + /* + * Write command register + */ + reg16 = 0xff; + dev = PCI_BDF(0, 0, 0); + pci_hose_read_config_word(&hose[0], dev, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(&hose[0], dev, PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(&hose[0], dev, PCI_STATUS, 0xffff); + pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80); + pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08); + + /* + * Hose scan. + */ + hose->last_busno = pci_hose_scan(hose); +} +#endif /* CONFIG_PCISLAVE */ + +#if defined(CONFIG_OF_LIBFDT) +void +ft_pci_setup(void *blob, bd_t *bd) +{ + int nodeoffset; + int err; + int tmp[2]; + + nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500"); + if (nodeoffset >= 0) { + tmp[0] = cpu_to_be32(hose[0].first_busno); + tmp[1] = cpu_to_be32(hose[0].last_busno); + err = fdt_setprop(blob, nodeoffset, "bus-range", + tmp, sizeof(tmp)); + + tmp[0] = cpu_to_be32(gd->pci_clk); + err = fdt_setprop(blob, nodeoffset, "clock-frequency", + tmp, sizeof(tmp[0])); + } +} +#elif defined(CONFIG_OF_FLAT_TREE) +void +ft_pci_setup(void *blob, bd_t *bd) +{ + u32 *p; + int len; + + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len); + if (p != NULL) { + p[0] = hose[0].first_busno; + p[1] = hose[0].last_busno; + } +} +#endif /* CONFIG_OF_FLAT_TREE */ +#endif /* CONFIG_PCI */ diff --git a/board/mpc8313erdb/Makefile b/board/mpc8313erdb/Makefile deleted file mode 100644 index a987e510dd2..00000000000 --- a/board/mpc8313erdb/Makefile +++ /dev/null @@ -1,50 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).a - -COBJS := $(BOARD).o sdram.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) - $(AR) crv $@ $(OBJS) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/mpc8313erdb/config.mk b/board/mpc8313erdb/config.mk deleted file mode 100644 index f76826495ef..00000000000 --- a/board/mpc8313erdb/config.mk +++ /dev/null @@ -1 +0,0 @@ -TEXT_BASE = 0xFE000000 diff --git a/board/mpc8313erdb/mpc8313erdb.c b/board/mpc8313erdb/mpc8313erdb.c deleted file mode 100644 index 861c143df57..00000000000 --- a/board/mpc8313erdb/mpc8313erdb.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * Copyright (C) Freescale Semiconductor, Inc. 2006-2007 - * - * Author: Scott Wood - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#if defined(CONFIG_OF_FLAT_TREE) -#include -#elif defined(CONFIG_OF_LIBFDT) -#include -#endif -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -int board_early_init_f(void) -{ -#ifndef CFG_8313ERDB_BROKEN_PMC - volatile immap_t *im = (immap_t *)CFG_IMMR; - - if (im->pmc.pmccr1 & PMCCR1_POWER_OFF) - gd->flags |= GD_FLG_SILENT; -#endif - - return 0; -} - -int checkboard(void) -{ - puts("Board: Freescale MPC8313ERDB\n"); - return 0; -} - -static struct pci_region pci_regions[] = { - { - bus_start: CFG_PCI1_MEM_BASE, - phys_start: CFG_PCI1_MEM_PHYS, - size: CFG_PCI1_MEM_SIZE, - flags: PCI_REGION_MEM | PCI_REGION_PREFETCH - }, - { - bus_start: CFG_PCI1_MMIO_BASE, - phys_start: CFG_PCI1_MMIO_PHYS, - size: CFG_PCI1_MMIO_SIZE, - flags: PCI_REGION_MEM - }, - { - bus_start: CFG_PCI1_IO_BASE, - phys_start: CFG_PCI1_IO_PHYS, - size: CFG_PCI1_IO_SIZE, - flags: PCI_REGION_IO - } -}; - -void pci_init_board(void) -{ - volatile immap_t *immr = (volatile immap_t *)CFG_IMMR; - volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk; - volatile law83xx_t *pci_law = immr->sysconf.pcilaw; - struct pci_region *reg[] = { pci_regions }; - int warmboot; - - /* Enable all 3 PCI_CLK_OUTPUTs. */ - clk->occr |= 0xe0000000; - - /* - * Configure PCI Local Access Windows - */ - pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR; - pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB; - - pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR; - pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB; - - warmboot = gd->bd->bi_bootflags & BOOTFLAG_WARM; -#ifndef CFG_8313ERDB_BROKEN_PMC - warmboot |= immr->pmc.pmccr1 & PMCCR1_POWER_OFF; -#endif - - mpc83xx_pci_init(1, reg, warmboot); -} - -#if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) -{ -#if defined(CONFIG_OF_FLAT_TREE) - u32 *p; - int len; - - p = ft_get_prop(blob, "/memory/reg", &len); - if (p != NULL) { - *p++ = cpu_to_be32(bd->bi_memstart); - *p = cpu_to_be32(bd->bi_memsize); - } -#endif - ft_cpu_setup(blob, bd); -#ifdef CONFIG_PCI - ft_pci_setup(blob, bd); -#endif -} -#endif diff --git a/board/mpc8313erdb/sdram.c b/board/mpc8313erdb/sdram.c deleted file mode 100644 index e6e84107eb2..00000000000 --- a/board/mpc8313erdb/sdram.c +++ /dev/null @@ -1,130 +0,0 @@ -/* - * Copyright (C) Freescale Semiconductor, Inc. 2006-2007 - * - * Authors: Nick.Spence@freescale.com - * Wilson.Lo@freescale.com - * scottwood@freescale.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - -#include -#include - -#include - -#ifndef CFG_8313ERDB_BROKEN_PMC -static void resume_from_sleep(void) -{ - DECLARE_GLOBAL_DATA_PTR; - u32 magic = *(u32 *)0; - - typedef void (*func_t)(void); - func_t resume = *(func_t *)4; - - if (magic == 0xf5153ae5) - resume(); - - gd->flags &= ~GD_FLG_SILENT; - puts("\nResume from sleep failed: bad magic word\n"); -} -#endif - -/* Fixed sdram init -- doesn't use serial presence detect. - * - * This is useful for faster booting in configs where the RAM is unlikely - * to be changed, or for things like NAND booting where space is tight. - */ -static long fixed_sdram(void) -{ - volatile immap_t *im = (volatile immap_t *)CFG_IMMR; - u32 msize = CFG_DDR_SIZE * 1024 * 1024; - u32 msize_log2 = __ilog2(msize); - - im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12; - im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1); - im->sysconf.ddrcdr = CFG_DDRCDR_VALUE; - - /* - * Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg], - * or the DDR2 controller may fail to initialize correctly. - */ - udelay(50000); - - im->ddr.csbnds[0].csbnds = (msize - 1) >> 24; - im->ddr.cs_config[0] = CFG_DDR_CONFIG; - - /* Currently we use only one CS, so disable the other bank. */ - im->ddr.cs_config[1] = 0; - - im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL; - im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; - im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; - im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; - im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; - -#ifndef CFG_8313ERDB_BROKEN_PMC - if (im->pmc.pmccr1 & PMCCR1_POWER_OFF) - im->ddr.sdram_cfg = CFG_SDRAM_CFG | SDRAM_CFG_BI; - else -#endif - im->ddr.sdram_cfg = CFG_SDRAM_CFG; - - im->ddr.sdram_cfg2 = CFG_SDRAM_CFG2; - im->ddr.sdram_mode = CFG_DDR_MODE; - im->ddr.sdram_mode2 = CFG_DDR_MODE_2; - - im->ddr.sdram_interval = CFG_DDR_INTERVAL; - sync(); - - /* enable DDR controller */ - im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; - - return msize; -} - -long int initdram(int board_type) -{ - volatile immap_t *im = (volatile immap_t *)CFG_IMMR; - volatile lbus83xx_t *lbc = &im->lbus; - u32 msize; - - if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) - return -1; - - /* DDR SDRAM - Main SODIMM */ - msize = fixed_sdram(); - - /* Local Bus setup lbcr and mrtpr */ - lbc->lbcr = CFG_LBC_LBCR; - lbc->mrtpr = CFG_LBC_MRTPR; - sync(); - -#ifndef CFG_8313ERDB_BROKEN_PMC - if (im->pmc.pmccr1 & PMCCR1_POWER_OFF) - resume_from_sleep(); -#endif - - /* return total bus SDRAM size(bytes) -- DDR */ - return msize; -} diff --git a/board/mpc832xemds/Makefile b/board/mpc832xemds/Makefile deleted file mode 100644 index 4da74b8277e..00000000000 --- a/board/mpc832xemds/Makefile +++ /dev/null @@ -1,50 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).a - -COBJS := $(BOARD).o pci.o ../freescale/common/pq-mds-pib.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/mpc832xemds/config.mk b/board/mpc832xemds/config.mk deleted file mode 100644 index 6c3eca75341..00000000000 --- a/board/mpc832xemds/config.mk +++ /dev/null @@ -1,28 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# MPC832XEMDS -# - -TEXT_BASE = 0xFE000000 diff --git a/board/mpc832xemds/mpc832xemds.c b/board/mpc832xemds/mpc832xemds.c deleted file mode 100644 index 7a45ded76a5..00000000000 --- a/board/mpc832xemds/mpc832xemds.c +++ /dev/null @@ -1,187 +0,0 @@ -/* - * Copyright (C) 2006 Freescale Semiconductor, Inc. - * - * Dave Liu - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#if defined(CONFIG_PCI) -#include -#endif -#if defined(CONFIG_SPD_EEPROM) -#include -#else -#include -#endif -#if defined(CONFIG_OF_FLAT_TREE) -#include -#elif defined(CONFIG_OF_LIBFDT) -#include -#endif -#if defined(CONFIG_PQ_MDS_PIB) -#include "../freescale/common/pq-mds-pib.h" -#endif - -const qe_iop_conf_t qe_iop_conf_tab[] = { - /* ETH3 */ - {1, 0, 1, 0, 1}, /* TxD0 */ - {1, 1, 1, 0, 1}, /* TxD1 */ - {1, 2, 1, 0, 1}, /* TxD2 */ - {1, 3, 1, 0, 1}, /* TxD3 */ - {1, 9, 1, 0, 1}, /* TxER */ - {1, 12, 1, 0, 1}, /* TxEN */ - {3, 24, 2, 0, 1}, /* TxCLK->CLK10 */ - - {1, 4, 2, 0, 1}, /* RxD0 */ - {1, 5, 2, 0, 1}, /* RxD1 */ - {1, 6, 2, 0, 1}, /* RxD2 */ - {1, 7, 2, 0, 1}, /* RxD3 */ - {1, 8, 2, 0, 1}, /* RxER */ - {1, 10, 2, 0, 1}, /* RxDV */ - {0, 13, 2, 0, 1}, /* RxCLK->CLK9 */ - {1, 11, 2, 0, 1}, /* COL */ - {1, 13, 2, 0, 1}, /* CRS */ - - /* ETH4 */ - {1, 18, 1, 0, 1}, /* TxD0 */ - {1, 19, 1, 0, 1}, /* TxD1 */ - {1, 20, 1, 0, 1}, /* TxD2 */ - {1, 21, 1, 0, 1}, /* TxD3 */ - {1, 27, 1, 0, 1}, /* TxER */ - {1, 30, 1, 0, 1}, /* TxEN */ - {3, 6, 2, 0, 1}, /* TxCLK->CLK8 */ - - {1, 22, 2, 0, 1}, /* RxD0 */ - {1, 23, 2, 0, 1}, /* RxD1 */ - {1, 24, 2, 0, 1}, /* RxD2 */ - {1, 25, 2, 0, 1}, /* RxD3 */ - {1, 26, 1, 0, 1}, /* RxER */ - {1, 28, 2, 0, 1}, /* Rx_DV */ - {3, 31, 2, 0, 1}, /* RxCLK->CLK7 */ - {1, 29, 2, 0, 1}, /* COL */ - {1, 31, 2, 0, 1}, /* CRS */ - - {3, 4, 3, 0, 2}, /* MDIO */ - {3, 5, 1, 0, 2}, /* MDC */ - - {0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */ -}; - -int board_early_init_f(void) -{ - volatile u8 *bcsr = (volatile u8 *)CFG_BCSR; - - /* Enable flash write */ - bcsr[9] &= ~0x08; - - return 0; -} - -int board_early_init_r(void) -{ -#ifdef CONFIG_PQ_MDS_PIB - pib_init(); -#endif - return 0; -} - -int fixed_sdram(void); - -long int initdram(int board_type) -{ - volatile immap_t *im = (immap_t *) CFG_IMMR; - u32 msize = 0; - - if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) - return -1; - - /* DDR SDRAM - Main SODIMM */ - im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; - - msize = fixed_sdram(); - - /* return total bus SDRAM size(bytes) -- DDR */ - return (msize * 1024 * 1024); -} - -/************************************************************************* - * fixed sdram init -- doesn't use serial presence detect. - ************************************************************************/ -int fixed_sdram(void) -{ - volatile immap_t *im = (immap_t *) CFG_IMMR; - u32 msize = 0; - u32 ddr_size; - u32 ddr_size_log2; - - msize = CFG_DDR_SIZE; - for (ddr_size = msize << 20, ddr_size_log2 = 0; - (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) { - if (ddr_size & 1) { - return -1; - } - } - im->sysconf.ddrlaw[0].ar = - LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); -#if (CFG_DDR_SIZE != 128) -#warning Currenly any ddr size other than 128 is not supported -#endif - im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL; - im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS; - im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG; - im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; - im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; - im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; - im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; - im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG; - im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2; - im->ddr.sdram_mode = CFG_DDR_MODE; - im->ddr.sdram_mode2 = CFG_DDR_MODE2; - im->ddr.sdram_interval = CFG_DDR_INTERVAL; - __asm__ __volatile__ ("sync"); - udelay(200); - - im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; - __asm__ __volatile__ ("sync"); - return msize; -} - -int checkboard(void) -{ - puts("Board: Freescale MPC832XEMDS\n"); - return 0; -} - -#if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) -{ -#if defined(CONFIG_OF_FLAT_TREE) - u32 *p; - int len; - - p = ft_get_prop(blob, "/memory/reg", &len); - if (p != NULL) { - *p++ = cpu_to_be32(bd->bi_memstart); - *p = cpu_to_be32(bd->bi_memsize); - } -#endif - ft_cpu_setup(blob, bd); -#ifdef CONFIG_PCI - ft_pci_setup(blob, bd); -#endif -} -#endif diff --git a/board/mpc832xemds/pci.c b/board/mpc832xemds/pci.c deleted file mode 100644 index 6bc35c70f2d..00000000000 --- a/board/mpc832xemds/pci.c +++ /dev/null @@ -1,298 +0,0 @@ -/* - * Copyright (C) 2006 Freescale Semiconductor, Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - */ - -/* - * PCI Configuration space access support for MPC83xx PCI Bridge - */ -#include -#include -#include -#include -#include -#if defined(CONFIG_OF_FLAT_TREE) -#include -#elif defined(CONFIG_OF_LIBFDT) -#include -#endif - -#include - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_PCI) -#define PCI_FUNCTION_CONFIG 0x44 -#define PCI_FUNCTION_CFG_LOCK 0x20 - -/* - * Initialize PCI Devices, report devices found - */ -#ifndef CONFIG_PCI_PNP -static struct pci_config_table pci_mpc83xxemds_config_table[] = { - { - PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, - pci_cfgfunc_config_device, - {PCI_ENET0_IOADDR, - PCI_ENET0_MEMADDR, - PCI_COMMON_MEMORY | PCI_COMMAND_MASTER} - }, - {} -} -#endif -static struct pci_controller hose[] = { - { -#ifndef CONFIG_PCI_PNP - config_table:pci_mpc83xxemds_config_table, -#endif - }, -}; - -/********************************************************************** - * pci_init_board() - *********************************************************************/ -void pci_init_board(void) -#ifdef CONFIG_PCISLAVE -{ - u16 reg16; - volatile immap_t *immr; - volatile law83xx_t *pci_law; - volatile pot83xx_t *pci_pot; - volatile pcictrl83xx_t *pci_ctrl; - volatile pciconf83xx_t *pci_conf; - - immr = (immap_t *) CFG_IMMR; - pci_law = immr->sysconf.pcilaw; - pci_pot = immr->ios.pot; - pci_ctrl = immr->pci_ctrl; - pci_conf = immr->pci_conf; - /* - * Configure PCI Inbound Translation Windows - */ - pci_ctrl[0].pitar0 = 0x0; - pci_ctrl[0].pibar0 = 0x0; - pci_ctrl[0].piwar0 = PIWAR_EN | PIWAR_RTT_SNOOP | - PIWAR_WTT_SNOOP | PIWAR_IWS_4K; - - pci_ctrl[0].pitar1 = 0x0; - pci_ctrl[0].pibar1 = 0x0; - pci_ctrl[0].piebar1 = 0x0; - pci_ctrl[0].piwar1 &= ~PIWAR_EN; - - pci_ctrl[0].pitar2 = 0x0; - pci_ctrl[0].pibar2 = 0x0; - pci_ctrl[0].piebar2 = 0x0; - pci_ctrl[0].piwar2 &= ~PIWAR_EN; - - hose[0].first_busno = 0; - hose[0].last_busno = 0xff; - pci_setup_indirect(&hose[0], - (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); - reg16 = 0xff; - - pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), - PCI_COMMAND, ®16); - reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MEMORY; - pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), - PCI_COMMAND, reg16); - - /* - * Clear non-reserved bits in status register. - */ - pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), - PCI_STATUS, 0xffff); - pci_hose_write_config_byte(&hose[0], PCI_BDF(0, 0, 0), - PCI_LATENCY_TIMER, 0x80); - - /* - * Unlock configuration lock in PCI function configuration register. - */ - pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), - PCI_FUNCTION_CONFIG, ®16); - reg16 &= ~(PCI_FUNCTION_CFG_LOCK); - pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), - PCI_FUNCTION_CONFIG, reg16); - - printf("Enabled PCI 32bit Agent Mode\n"); -} -#else -{ - volatile immap_t *immr; - volatile clk83xx_t *clk; - volatile law83xx_t *pci_law; - volatile pot83xx_t *pci_pot; - volatile pcictrl83xx_t *pci_ctrl; - volatile pciconf83xx_t *pci_conf; - - u16 reg16; - u32 val32; - u32 dev; - - immr = (immap_t *) CFG_IMMR; - clk = (clk83xx_t *) & immr->clk; - pci_law = immr->sysconf.pcilaw; - pci_pot = immr->ios.pot; - pci_ctrl = immr->pci_ctrl; - pci_conf = immr->pci_conf; - /* - * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode - */ - val32 = clk->occr; - udelay(2000); -#if defined(PCI_66M) - clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2; - printf("PCI clock is 66MHz\n"); -#elif defined(PCI_33M) - clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 | - OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICR; - printf("PCI clock is 33MHz\n"); -#else - clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2; - printf("PCI clock is 66MHz\n"); -#endif - udelay(2000); - - /* - * Configure PCI Local Access Windows - */ - pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR; - pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M; - - pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR; - pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_1M; - - /* - * Configure PCI Outbound Translation Windows - */ - - /* PCI mem space - prefetch */ - pci_pot[0].potar = (CFG_PCI_MEM_BASE >> 12) & POTAR_TA_MASK; - pci_pot[0].pobar = (CFG_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[0].pocmr = - POCMR_EN | POCMR_SE | (POCMR_CM_256M & POCMR_CM_MASK); - - /* PCI mmio - non-prefetch mem space */ - pci_pot[1].potar = (CFG_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK; - pci_pot[1].pobar = (CFG_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[1].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK); - - /* PCI IO space */ - pci_pot[2].potar = (CFG_PCI_IO_BASE >> 12) & POTAR_TA_MASK; - pci_pot[2].pobar = (CFG_PCI_IO_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[2].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); - - /* - * Configure PCI Inbound Translation Windows - */ - pci_ctrl[0].pitar1 = (CFG_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK; - pci_ctrl[0].pibar1 = (CFG_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK; - pci_ctrl[0].piebar1 = 0x0; - pci_ctrl[0].piwar1 = - PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | - PIWAR_IWS_2G; - - /* - * Release PCI RST Output signal - */ - udelay(2000); - pci_ctrl[0].gcr = 1; - udelay(2000); - - hose[0].first_busno = 0; - hose[0].last_busno = 0xff; - - /* PCI memory prefetch space */ - pci_set_region(hose[0].regions + 0, - CFG_PCI_MEM_BASE, - CFG_PCI_MEM_PHYS, - CFG_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); - - /* PCI memory space */ - pci_set_region(hose[0].regions + 1, - CFG_PCI_MMIO_BASE, - CFG_PCI_MMIO_PHYS, CFG_PCI_MMIO_SIZE, PCI_REGION_MEM); - - /* PCI IO space */ - pci_set_region(hose[0].regions + 2, - CFG_PCI_IO_BASE, - CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO); - - /* System memory space */ - pci_set_region(hose[0].regions + 3, - CFG_PCI_SLV_MEM_LOCAL, - CFG_PCI_SLV_MEM_BUS, - CFG_PCI_SLV_MEM_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); - - hose[0].region_count = 4; - - pci_setup_indirect(&hose[0], - (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); - - pci_register_hose(hose); - - /* - * Write command register - */ - reg16 = 0xff; - dev = PCI_BDF(0, 0, 0); - pci_hose_read_config_word(&hose[0], dev, PCI_COMMAND, ®16); - reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - pci_hose_write_config_word(&hose[0], dev, PCI_COMMAND, reg16); - - /* - * Clear non-reserved bits in status register. - */ - pci_hose_write_config_word(&hose[0], dev, PCI_STATUS, 0xffff); - pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80); - pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08); - - /* - * Hose scan. - */ - hose->last_busno = pci_hose_scan(hose); -} -#endif /* CONFIG_PCISLAVE */ - -#if defined(CONFIG_OF_LIBFDT) -void -ft_pci_setup(void *blob, bd_t *bd) -{ - int nodeoffset; - int err; - int tmp[2]; - - nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500"); - if (nodeoffset >= 0) { - tmp[0] = cpu_to_be32(hose[0].first_busno); - tmp[1] = cpu_to_be32(hose[0].last_busno); - err = fdt_setprop(blob, nodeoffset, "bus-range", - tmp, sizeof(tmp)); - - tmp[0] = cpu_to_be32(gd->pci_clk); - err = fdt_setprop(blob, nodeoffset, "clock-frequency", - tmp, sizeof(tmp[0])); - } -} -#elif defined(CONFIG_OF_FLAT_TREE) -void -ft_pci_setup(void *blob, bd_t *bd) -{ - u32 *p; - int len; - - p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len); - if (p != NULL) { - p[0] = hose[0].first_busno; - p[1] = hose[0].last_busno; - } -} -#endif /* CONFIG_OF_FLAT_TREE */ -#endif /* CONFIG_PCI */ diff --git a/board/mpc8349emds/Makefile b/board/mpc8349emds/Makefile deleted file mode 100644 index 5ec7a871d4d..00000000000 --- a/board/mpc8349emds/Makefile +++ /dev/null @@ -1,50 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).a - -COBJS := $(BOARD).o pci.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/mpc8349emds/config.mk b/board/mpc8349emds/config.mk deleted file mode 100644 index edf64d1508a..00000000000 --- a/board/mpc8349emds/config.mk +++ /dev/null @@ -1,28 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# MPC8349EMDS -# - -TEXT_BASE = 0xFE000000 diff --git a/board/mpc8349emds/mpc8349emds.c b/board/mpc8349emds/mpc8349emds.c deleted file mode 100644 index 39c09162760..00000000000 --- a/board/mpc8349emds/mpc8349emds.c +++ /dev/null @@ -1,274 +0,0 @@ -/* - * (C) Copyright 2006 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - */ - -#include -#include -#include -#include -#include -#include -#include -#if defined(CONFIG_SPD_EEPROM) -#include -#endif -#if defined(CONFIG_OF_FLAT_TREE) -#include -#elif defined(CONFIG_OF_LIBFDT) -#include -#endif - -int fixed_sdram(void); -void sdram_init(void); - -#if defined(CONFIG_DDR_ECC) && defined(CONFIG_MPC83XX) -void ddr_enable_ecc(unsigned int dram_size); -#endif - -int board_early_init_f (void) -{ - volatile u8* bcsr = (volatile u8*)CFG_BCSR; - - /* Enable flash write */ - bcsr[1] &= ~0x01; - -#ifdef CFG_USE_MPC834XSYS_USB_PHY - /* Use USB PHY on SYS board */ - bcsr[5] |= 0x02; -#endif - - return 0; -} - -#define ns2clk(ns) (ns / (1000000000 / CONFIG_8349_CLKIN) + 1) - -long int initdram (int board_type) -{ - volatile immap_t *im = (immap_t *)CFG_IMMR; - u32 msize = 0; - - if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) - return -1; - - /* DDR SDRAM - Main SODIMM */ - im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; -#if defined(CONFIG_SPD_EEPROM) - msize = spd_sdram(); -#else - msize = fixed_sdram(); -#endif - /* - * Initialize SDRAM if it is on local bus. - */ - sdram_init(); - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* - * Initialize and enable DDR ECC. - */ - ddr_enable_ecc(msize * 1024 * 1024); -#endif - - /* return total bus SDRAM size(bytes) -- DDR */ - return (msize * 1024 * 1024); -} - -#if !defined(CONFIG_SPD_EEPROM) -/************************************************************************* - * fixed sdram init -- doesn't use serial presence detect. - ************************************************************************/ -int fixed_sdram(void) -{ - volatile immap_t *im = (immap_t *)CFG_IMMR; - u32 msize = 0; - u32 ddr_size; - u32 ddr_size_log2; - - msize = CFG_DDR_SIZE; - for (ddr_size = msize << 20, ddr_size_log2 = 0; - (ddr_size > 1); - ddr_size = ddr_size>>1, ddr_size_log2++) { - if (ddr_size & 1) { - return -1; - } - } - im->sysconf.ddrlaw[0].bar = ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff); - im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); - -#if (CFG_DDR_SIZE != 256) -#warning Currenly any ddr size other than 256 is not supported -#endif -#ifdef CONFIG_DDR_II - im->ddr.csbnds[2].csbnds = CFG_DDR_CS2_BNDS; - im->ddr.cs_config[2] = CFG_DDR_CS2_CONFIG; - im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; - im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; - im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; - im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; - im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG; - im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2; - im->ddr.sdram_mode = CFG_DDR_MODE; - im->ddr.sdram_mode2 = CFG_DDR_MODE2; - im->ddr.sdram_interval = CFG_DDR_INTERVAL; - im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL; -#else - im->ddr.csbnds[2].csbnds = 0x0000000f; - im->ddr.cs_config[2] = CFG_DDR_CONFIG; - - /* currently we use only one CS, so disable the other banks */ - im->ddr.cs_config[0] = 0; - im->ddr.cs_config[1] = 0; - im->ddr.cs_config[3] = 0; - - im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; - im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; - - im->ddr.sdram_cfg = - SDRAM_CFG_SREN -#if defined(CONFIG_DDR_2T_TIMING) - | SDRAM_CFG_2T_EN -#endif - | 2 << SDRAM_CFG_SDRAM_TYPE_SHIFT; -#if defined (CONFIG_DDR_32BIT) - /* for 32-bit mode burst length is 8 */ - im->ddr.sdram_cfg |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE); -#endif - im->ddr.sdram_mode = CFG_DDR_MODE; - - im->ddr.sdram_interval = CFG_DDR_INTERVAL; -#endif - udelay(200); - - /* enable DDR controller */ - im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; - return msize; -} -#endif/*!CFG_SPD_EEPROM*/ - - -int checkboard (void) -{ - puts("Board: Freescale MPC8349EMDS\n"); - return 0; -} - -/* - * if MPC8349EMDS is soldered with SDRAM - */ -#if defined(CFG_BR2_PRELIM) \ - && defined(CFG_OR2_PRELIM) \ - && defined(CFG_LBLAWBAR2_PRELIM) \ - && defined(CFG_LBLAWAR2_PRELIM) -/* - * Initialize SDRAM memory on the Local Bus. - */ - -void sdram_init(void) -{ - volatile immap_t *immap = (immap_t *)CFG_IMMR; - volatile lbus83xx_t *lbc= &immap->lbus; - uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE; - - /* - * Setup SDRAM Base and Option Registers, already done in cpu_init.c - */ - - /* setup mtrpt, lsrt and lbcr for LB bus */ - lbc->lbcr = CFG_LBC_LBCR; - lbc->mrtpr = CFG_LBC_MRTPR; - lbc->lsrt = CFG_LBC_LSRT; - asm("sync"); - - /* - * Configure the SDRAM controller Machine Mode Register. - */ - lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */ - - lbc->lsdmr = CFG_LBC_LSDMR_1; /* 0x68636733; precharge all the banks */ - asm("sync"); - *sdram_addr = 0xff; - udelay(100); - - lbc->lsdmr = CFG_LBC_LSDMR_2; /* 0x48636733; auto refresh */ - asm("sync"); - /*1 times*/ - *sdram_addr = 0xff; - udelay(100); - /*2 times*/ - *sdram_addr = 0xff; - udelay(100); - /*3 times*/ - *sdram_addr = 0xff; - udelay(100); - /*4 times*/ - *sdram_addr = 0xff; - udelay(100); - /*5 times*/ - *sdram_addr = 0xff; - udelay(100); - /*6 times*/ - *sdram_addr = 0xff; - udelay(100); - /*7 times*/ - *sdram_addr = 0xff; - udelay(100); - /*8 times*/ - *sdram_addr = 0xff; - udelay(100); - - /* 0x58636733; mode register write operation */ - lbc->lsdmr = CFG_LBC_LSDMR_4; - asm("sync"); - *sdram_addr = 0xff; - udelay(100); - - lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */ - asm("sync"); - *sdram_addr = 0xff; - udelay(100); -} -#else -void sdram_init(void) -{ -} -#endif - -#if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) -{ -#if defined(CONFIG_OF_FLAT_TREE) - u32 *p; - int len; - - p = ft_get_prop(blob, "/memory/reg", &len); - if (p != NULL) { - *p++ = cpu_to_be32(bd->bi_memstart); - *p = cpu_to_be32(bd->bi_memsize); - } -#endif - ft_cpu_setup(blob, bd); -#ifdef CONFIG_PCI - ft_pci_setup(blob, bd); -#endif -} -#endif diff --git a/board/mpc8349emds/pci.c b/board/mpc8349emds/pci.c deleted file mode 100644 index ae94a2f384f..00000000000 --- a/board/mpc8349emds/pci.c +++ /dev/null @@ -1,446 +0,0 @@ -/* - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - */ - -#include -#include -#include -#include -#include -#include -#if defined(CONFIG_OF_FLAT_TREE) -#include -#elif defined(CONFIG_OF_LIBFDT) -#include -#endif - - -DECLARE_GLOBAL_DATA_PTR; - -#ifdef CONFIG_PCI - -/* System RAM mapped to PCI space */ -#define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE -#define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE - -#ifndef CONFIG_PCI_PNP -static struct pci_config_table pci_mpc8349emds_config_table[] = { - {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, - PCI_IDSEL_NUMBER, PCI_ANY_ID, - pci_cfgfunc_config_device, {PCI_ENET0_IOADDR, - PCI_ENET0_MEMADDR, - PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER - } - }, - {} -}; -#endif - -static struct pci_controller pci_hose[] = { - { -#ifndef CONFIG_PCI_PNP - config_table:pci_mpc8349emds_config_table, -#endif - }, - { -#ifndef CONFIG_PCI_PNP - config_table:pci_mpc8349emds_config_table, -#endif - } -}; - -/************************************************************************** - * - * pib_init() -- initialize the PCA9555PW IO expander on the PIB board - * - */ -void -pib_init(void) -{ - u8 val8, orig_i2c_bus; - /* - * Assign PIB PMC slot to desired PCI bus - */ - /* Switch temporarily to I2C bus #2 */ - orig_i2c_bus = i2c_get_bus_num(); - i2c_set_bus_num(1); - - val8 = 0; - i2c_write(0x23, 0x6, 1, &val8, 1); - i2c_write(0x23, 0x7, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x23, 0x2, 1, &val8, 1); - i2c_write(0x23, 0x3, 1, &val8, 1); - - val8 = 0; - i2c_write(0x26, 0x6, 1, &val8, 1); - val8 = 0x34; - i2c_write(0x26, 0x7, 1, &val8, 1); -#if defined(PCI_64BIT) - val8 = 0xf4; /* PMC2:PCI1/64-bit */ -#elif defined(PCI_ALL_PCI1) - val8 = 0xf3; /* PMC1:PCI1 PMC2:PCI1 PMC3:PCI1 */ -#elif defined(PCI_ONE_PCI1) - val8 = 0xf9; /* PMC1:PCI1 PMC2:PCI2 PMC3:PCI2 */ -#else - val8 = 0xf5; /* PMC1:PCI1 PMC2:PCI1 PMC3:PCI2 */ -#endif - i2c_write(0x26, 0x2, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x26, 0x3, 1, &val8, 1); - val8 = 0; - i2c_write(0x27, 0x6, 1, &val8, 1); - i2c_write(0x27, 0x7, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x27, 0x2, 1, &val8, 1); - val8 = 0xef; - i2c_write(0x27, 0x3, 1, &val8, 1); - asm("eieio"); - -#if defined(PCI_64BIT) - printf("PCI1: 64-bit on PMC2\n"); -#elif defined(PCI_ALL_PCI1) - printf("PCI1: 32-bit on PMC1, PMC2, PMC3\n"); -#elif defined(PCI_ONE_PCI1) - printf("PCI1: 32-bit on PMC1\n"); - printf("PCI2: 32-bit on PMC2, PMC3\n"); -#else - printf("PCI1: 32-bit on PMC1, PMC2\n"); - printf("PCI2: 32-bit on PMC3\n"); -#endif - /* Reset to original I2C bus */ - i2c_set_bus_num(orig_i2c_bus); -} - -/************************************************************************** - * pci_init_board() - * - * NOTICE: PCI2 is not currently supported - * - */ -void -pci_init_board(void) -{ - volatile immap_t * immr; - volatile clk83xx_t * clk; - volatile law83xx_t * pci_law; - volatile pot83xx_t * pci_pot; - volatile pcictrl83xx_t * pci_ctrl; - volatile pciconf83xx_t * pci_conf; - u16 reg16; - u32 reg32; - u32 dev; - struct pci_controller * hose; - - immr = (immap_t *)CFG_IMMR; - clk = (clk83xx_t *)&immr->clk; - pci_law = immr->sysconf.pcilaw; - pci_pot = immr->ios.pot; - pci_ctrl = immr->pci_ctrl; - pci_conf = immr->pci_conf; - - hose = &pci_hose[0]; - - pib_init(); - - /* - * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode - */ - - reg32 = clk->occr; - udelay(2000); - clk->occr = 0xff000000; - udelay(2000); - - /* - * Release PCI RST Output signal - */ - pci_ctrl[0].gcr = 0; - udelay(2000); - pci_ctrl[0].gcr = 1; - -#ifdef CONFIG_MPC83XX_PCI2 - pci_ctrl[1].gcr = 0; - udelay(2000); - pci_ctrl[1].gcr = 1; -#endif - - /* We need to wait at least a 1sec based on PCI specs */ - { - int i; - - for (i = 0; i < 1000; ++i) - udelay (1000); - } - - /* - * Configure PCI Local Access Windows - */ - pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR; - pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G; - - pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR; - pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_4M; - - /* - * Configure PCI Outbound Translation Windows - */ - - /* PCI1 mem space - prefetch */ - pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK; - pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[0].pocmr = POCMR_EN | POCMR_PREFETCH_EN | (POCMR_CM_256M & POCMR_CM_MASK); - - /* PCI1 IO space */ - pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK; - pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[1].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); - - /* PCI1 mmio - non-prefetch mem space */ - pci_pot[2].potar = (CFG_PCI1_MMIO_BASE >> 12) & POTAR_TA_MASK; - pci_pot[2].pobar = (CFG_PCI1_MMIO_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[2].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK); - - /* - * Configure PCI Inbound Translation Windows - */ - - /* we need RAM mapped to PCI space for the devices to - * access main memory */ - pci_ctrl[0].pitar1 = 0x0; - pci_ctrl[0].pibar1 = 0x0; - pci_ctrl[0].piebar1 = 0x0; - pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1); - - hose->first_busno = 0; - hose->last_busno = 0xff; - - /* PCI memory prefetch space */ - pci_set_region(hose->regions + 0, - CFG_PCI1_MEM_BASE, - CFG_PCI1_MEM_PHYS, - CFG_PCI1_MEM_SIZE, - PCI_REGION_MEM|PCI_REGION_PREFETCH); - - /* PCI memory space */ - pci_set_region(hose->regions + 1, - CFG_PCI1_MMIO_BASE, - CFG_PCI1_MMIO_PHYS, - CFG_PCI1_MMIO_SIZE, - PCI_REGION_MEM); - - /* PCI IO space */ - pci_set_region(hose->regions + 2, - CFG_PCI1_IO_BASE, - CFG_PCI1_IO_PHYS, - CFG_PCI1_IO_SIZE, - PCI_REGION_IO); - - /* System memory space */ - pci_set_region(hose->regions + 3, - CONFIG_PCI_SYS_MEM_BUS, - CONFIG_PCI_SYS_MEM_PHYS, - gd->ram_size, - PCI_REGION_MEM | PCI_REGION_MEMORY); - - hose->region_count = 4; - - pci_setup_indirect(hose, - (CFG_IMMR+0x8300), - (CFG_IMMR+0x8304)); - - pci_register_hose(hose); - - /* - * Write to Command register - */ - reg16 = 0xff; - dev = PCI_BDF(hose->first_busno, 0, 0); - pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16); - reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); - - /* - * Clear non-reserved bits in status register. - */ - pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); - pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); - pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); - -#ifdef CONFIG_PCI_SCAN_SHOW - printf("PCI: Bus Dev VenId DevId Class Int\n"); -#endif - /* - * Hose scan. - */ - hose->last_busno = pci_hose_scan(hose); - -#ifdef CONFIG_MPC83XX_PCI2 - hose = &pci_hose[1]; - - /* - * Configure PCI Outbound Translation Windows - */ - - /* PCI2 mem space - prefetch */ - pci_pot[3].potar = (CFG_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK; - pci_pot[3].pobar = (CFG_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[3].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_PREFETCH_EN | (POCMR_CM_256M & POCMR_CM_MASK); - - /* PCI2 IO space */ - pci_pot[4].potar = (CFG_PCI2_IO_BASE >> 12) & POTAR_TA_MASK; - pci_pot[4].pobar = (CFG_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[4].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); - - /* PCI2 mmio - non-prefetch mem space */ - pci_pot[5].potar = (CFG_PCI2_MMIO_BASE >> 12) & POTAR_TA_MASK; - pci_pot[5].pobar = (CFG_PCI2_MMIO_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[5].pocmr = POCMR_EN | POCMR_PCI2 | (POCMR_CM_256M & POCMR_CM_MASK); - - /* - * Configure PCI Inbound Translation Windows - */ - - /* we need RAM mapped to PCI space for the devices to - * access main memory */ - pci_ctrl[1].pitar1 = 0x0; - pci_ctrl[1].pibar1 = 0x0; - pci_ctrl[1].piebar1 = 0x0; - pci_ctrl[1].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1); - - hose->first_busno = pci_hose[0].last_busno + 1; - hose->last_busno = 0xff; - - /* PCI memory prefetch space */ - pci_set_region(hose->regions + 0, - CFG_PCI2_MEM_BASE, - CFG_PCI2_MEM_PHYS, - CFG_PCI2_MEM_SIZE, - PCI_REGION_MEM|PCI_REGION_PREFETCH); - - /* PCI memory space */ - pci_set_region(hose->regions + 1, - CFG_PCI2_MMIO_BASE, - CFG_PCI2_MMIO_PHYS, - CFG_PCI2_MMIO_SIZE, - PCI_REGION_MEM); - - /* PCI IO space */ - pci_set_region(hose->regions + 2, - CFG_PCI2_IO_BASE, - CFG_PCI2_IO_PHYS, - CFG_PCI2_IO_SIZE, - PCI_REGION_IO); - - /* System memory space */ - pci_set_region(hose->regions + 3, - CONFIG_PCI_SYS_MEM_BUS, - CONFIG_PCI_SYS_MEM_PHYS, - gd->ram_size, - PCI_REGION_MEM | PCI_REGION_MEMORY); - - hose->region_count = 4; - - pci_setup_indirect(hose, - (CFG_IMMR+0x8380), - (CFG_IMMR+0x8384)); - - pci_register_hose(hose); - - /* - * Write to Command register - */ - reg16 = 0xff; - dev = PCI_BDF(hose->first_busno, 0, 0); - pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16); - reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); - - /* - * Clear non-reserved bits in status register. - */ - pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); - pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); - pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); - - /* - * Hose scan. - */ - hose->last_busno = pci_hose_scan(hose); -#endif - -} - -#if defined(CONFIG_OF_LIBFDT) -void -ft_pci_setup(void *blob, bd_t *bd) -{ - int nodeoffset; - int err; - int tmp[2]; - - nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500"); - if (nodeoffset >= 0) { - tmp[0] = cpu_to_be32(pci_hose[0].first_busno); - tmp[1] = cpu_to_be32(pci_hose[0].last_busno); - err = fdt_setprop(blob, nodeoffset, "bus-range", - tmp, sizeof(tmp)); - - tmp[0] = cpu_to_be32(gd->pci_clk); - err = fdt_setprop(blob, nodeoffset, "clock-frequency", - tmp, sizeof(tmp[0])); - } -#ifdef CONFIG_MPC83XX_PCI2 - nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8600"); - if (nodeoffset >= 0) { - tmp[0] = cpu_to_be32(pci_hose[1].first_busno); - tmp[1] = cpu_to_be32(pci_hose[1].last_busno); - err = fdt_setprop(blob, nodeoffset, "bus-range", - tmp, sizeof(tmp)); - - tmp[0] = cpu_to_be32(gd->pci_clk); - err = fdt_setprop(blob, nodeoffset, "clock-frequency", - tmp, sizeof(tmp[0])); - } -#endif -} -#elif defined(CONFIG_OF_FLAT_TREE) -void -ft_pci_setup(void *blob, bd_t *bd) -{ - u32 *p; - int len; - - p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len); - if (p != NULL) { - p[0] = pci_hose[0].first_busno; - p[1] = pci_hose[0].last_busno; - } - -#ifdef CONFIG_MPC83XX_PCI2 - p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8600/bus-range", &len); - if (p != NULL) { - p[0] = pci_hose[1].first_busno; - p[1] = pci_hose[1].last_busno; - } -#endif -} -#endif /* CONFIG_OF_FLAT_TREE */ -#endif /* CONFIG_PCI */ diff --git a/board/mpc8349itx/Makefile b/board/mpc8349itx/Makefile deleted file mode 100644 index 31bcdb8642a..00000000000 --- a/board/mpc8349itx/Makefile +++ /dev/null @@ -1,48 +0,0 @@ -# -# Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).a - -COBJS := $(BOARD).o pci.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) - $(AR) crv $@ $(OBJS) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - -######################################################################### - -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/mpc8349itx/config.mk b/board/mpc8349itx/config.mk deleted file mode 100644 index 79f1765fa1b..00000000000 --- a/board/mpc8349itx/config.mk +++ /dev/null @@ -1,31 +0,0 @@ -# -# Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# MPC8349E-mITX and MPC8349E-mITX-GP -# - -sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp - -ifndef TEXT_BASE -TEXT_BASE = 0xFEF00000 -endif diff --git a/board/mpc8349itx/mpc8349itx.c b/board/mpc8349itx/mpc8349itx.c deleted file mode 100644 index c82f7847a22..00000000000 --- a/board/mpc8349itx/mpc8349itx.c +++ /dev/null @@ -1,407 +0,0 @@ -/* - * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include - -#ifdef CONFIG_PCI -#include -#include -#endif - -#ifdef CONFIG_SPD_EEPROM -#include -#else -#include -#endif -#if defined(CONFIG_OF_FLAT_TREE) -#include -#elif defined(CONFIG_OF_LIBFDT) -#include -#endif - -#ifndef CONFIG_SPD_EEPROM -/************************************************************************* - * fixed sdram init -- doesn't use serial presence detect. - ************************************************************************/ -int fixed_sdram(void) -{ - volatile immap_t *im = (immap_t *) CFG_IMMR; - u32 ddr_size; /* The size of RAM, in bytes */ - u32 ddr_size_log2 = 0; - - for (ddr_size = CFG_DDR_SIZE * 0x100000; ddr_size > 1; ddr_size >>= 1) { - if (ddr_size & 1) { - return -1; - } - ddr_size_log2++; - } - - im->sysconf.ddrlaw[0].ar = - LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); - im->sysconf.ddrlaw[0].bar = (CFG_DDR_SDRAM_BASE >> 12) & 0xfffff; - - /* Only one CS0 for DDR */ - im->ddr.csbnds[0].csbnds = 0x0000000f; - im->ddr.cs_config[0] = CFG_DDR_CONFIG; - - debug("cs0_bnds = 0x%08x\n", im->ddr.csbnds[0].csbnds); - debug("cs0_config = 0x%08x\n", im->ddr.cs_config[0]); - - debug("DDR:bar=0x%08x\n", im->sysconf.ddrlaw[0].bar); - debug("DDR:ar=0x%08x\n", im->sysconf.ddrlaw[0].ar); - - im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; - im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;/* Was "2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT" */ - im->ddr.sdram_cfg = SDRAM_CFG_SREN | SDRAM_CFG_SDRAM_TYPE_DDR1; - im->ddr.sdram_mode = - (0x0000 << SDRAM_MODE_ESD_SHIFT) | (0x0032 << SDRAM_MODE_SD_SHIFT); - im->ddr.sdram_interval = - (0x0410 << SDRAM_INTERVAL_REFINT_SHIFT) | (0x0100 << - SDRAM_INTERVAL_BSTOPRE_SHIFT); - im->ddr.sdram_clk_cntl = CFG_DDR_SDRAM_CLK_CNTL; - - udelay(200); - - im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; - - debug("DDR:timing_cfg_1=0x%08x\n", im->ddr.timing_cfg_1); - debug("DDR:timing_cfg_2=0x%08x\n", im->ddr.timing_cfg_2); - debug("DDR:sdram_mode=0x%08x\n", im->ddr.sdram_mode); - debug("DDR:sdram_interval=0x%08x\n", im->ddr.sdram_interval); - debug("DDR:sdram_cfg=0x%08x\n", im->ddr.sdram_cfg); - - return CFG_DDR_SIZE; -} -#endif - -#ifdef CONFIG_PCI -/* - * Initialize PCI Devices, report devices found - */ -#ifndef CONFIG_PCI_PNP -static struct pci_config_table pci_mpc83xxmitx_config_table[] = { - { - PCI_ANY_ID, - PCI_ANY_ID, - PCI_ANY_ID, - PCI_ANY_ID, - 0x0f, - PCI_ANY_ID, - pci_cfgfunc_config_device, - { - PCI_ENET0_IOADDR, - PCI_ENET0_MEMADDR, - PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER} - }, - {} -} -#endif - -volatile static struct pci_controller hose[] = { - { -#ifndef CONFIG_PCI_PNP - config_table:pci_mpc83xxmitx_config_table, -#endif - }, - { -#ifndef CONFIG_PCI_PNP - config_table:pci_mpc83xxmitx_config_table, -#endif - } -}; -#endif /* CONFIG_PCI */ - -long int initdram(int board_type) -{ - volatile immap_t *im = (immap_t *) CFG_IMMR; - u32 msize = 0; -#ifdef CONFIG_DDR_ECC - volatile ddr83xx_t *ddr = &im->ddr; -#endif - - if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) - return -1; - - /* DDR SDRAM - Main SODIMM */ - im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; -#ifdef CONFIG_SPD_EEPROM - msize = spd_sdram(); -#else - msize = fixed_sdram(); -#endif - -#ifdef CONFIG_DDR_ECC - if (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) - /* Unlike every other board, on the 83xx spd_sdram() returns - megabytes instead of just bytes. That's why we need to - multiple by 1MB when calling ddr_enable_ecc(). */ - ddr_enable_ecc(msize * 1048576); -#endif - - /* return total bus RAM size(bytes) */ - return msize * 1024 * 1024; -} - -int checkboard(void) -{ -#ifdef CONFIG_MPC8349ITX - puts("Board: Freescale MPC8349E-mITX\n"); -#else - puts("Board: Freescale MPC8349E-mITX-GP\n"); -#endif - - return 0; -} - -/* - * Implement a work-around for a hardware problem with compact - * flash. - * - * Program the UPM if compact flash is enabled. - */ -int misc_init_f(void) -{ -#ifdef CONFIG_VSC7385 - volatile u32 *vsc7385_cpuctrl; - - /* 0x1c0c0 is the VSC7385 CPU Control (CPUCTRL) Register. The power up - default of VSC7385 L1_IRQ and L2_IRQ requests are active high. That - means it is 0 when the IRQ is not active. This makes the wire-AND - logic always assert IRQ7 to CPU even if there is no request from the - switch. Since the compact flash and the switch share the same IRQ, - the Linux kernel will think that the compact flash is requesting irq - and get stuck when it tries to clear the IRQ. Thus we need to set - the L2_IRQ0 and L2_IRQ1 to active low. - - The following code sets the L1_IRQ and L2_IRQ polarity to active low. - Without this code, compact flash will not work in Linux because - unlike U-Boot, Linux uses the IRQ, so this code is necessary if we - don't enable compact flash for U-Boot. - */ - - vsc7385_cpuctrl = (volatile u32 *)(CFG_VSC7385_BASE + 0x1c0c0); - *vsc7385_cpuctrl |= 0x0c; -#endif - -#ifdef CONFIG_COMPACT_FLASH - /* UPM Table Configuration Code */ - static uint UPMATable[] = { - 0xcffffc00, 0x0fffff00, 0x0fafff00, 0x0fafff00, - 0x0faffd00, 0x0faffc04, 0x0ffffc00, 0x3ffffc01, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfff7fc00, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, - 0xcffffc00, 0x0fffff00, 0x0ff3ff00, 0x0ff3ff00, - 0x0ff3fe00, 0x0ffffc00, 0x3ffffc05, 0xfffffc00, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01 - }; - volatile immap_t *immap = (immap_t *) CFG_IMMR; - volatile lbus83xx_t *lbus = &immap->lbus; - - lbus->bank[3].br = CFG_BR3_PRELIM; - lbus->bank[3].or = CFG_OR3_PRELIM; - - /* Program the MAMR. RFEN=0, OP=00, UWPL=1, AM=000, DS=01, G0CL=000, - GPL4=0, RLF=0001, WLF=0001, TLF=0001, MAD=000000 - */ - lbus->mamr = 0x08404440; - - upmconfig(0, UPMATable, sizeof(UPMATable) / sizeof(UPMATable[0])); - - puts("UPMA: Configured for compact flash\n"); -#endif - - return 0; -} - -/* - * Make sure the EEPROM has the HRCW correctly programmed. - * Make sure the RTC is correctly programmed. - * - * The MPC8349E-mITX can be configured to load the HRCW from - * EEPROM instead of flash. This is controlled via jumpers - * LGPL0, 1, and 3. Normally, these jumpers are set to 000 (all - * jumpered), but if they're set to 001 or 010, then the HRCW is - * read from the "I2C EEPROM". - * - * This function makes sure that the I2C EEPROM is programmed - * correctly. - */ -int misc_init_r(void) -{ - int rc = 0; - -#ifdef CONFIG_HARD_I2C - - unsigned int orig_bus = i2c_get_bus_num(); - u8 i2c_data; - -#ifdef CFG_I2C_RTC_ADDR - u8 ds1339_data[17]; -#endif - -#ifdef CFG_I2C_EEPROM_ADDR - static u8 eeprom_data[] = /* HRCW data */ - { - 0xAA, 0x55, 0xAA, /* Preamble */ - 0x7C, /* ACS=0, BYTE_EN=1111, CONT=1 */ - 0x02, 0x40, /* RCWL ADDR=0x0_0900 */ - (CFG_HRCW_LOW >> 24) & 0xFF, - (CFG_HRCW_LOW >> 16) & 0xFF, - (CFG_HRCW_LOW >> 8) & 0xFF, - CFG_HRCW_LOW & 0xFF, - 0x7C, /* ACS=0, BYTE_EN=1111, CONT=1 */ - 0x02, 0x41, /* RCWH ADDR=0x0_0904 */ - (CFG_HRCW_HIGH >> 24) & 0xFF, - (CFG_HRCW_HIGH >> 16) & 0xFF, - (CFG_HRCW_HIGH >> 8) & 0xFF, - CFG_HRCW_HIGH & 0xFF - }; - - u8 data[sizeof(eeprom_data)]; -#endif - - printf("Board revision: "); - i2c_set_bus_num(1); - if (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0) - printf("%u.%u (PCF8475A)\n", (i2c_data & 0x02) >> 1, i2c_data & 0x01); - else if (i2c_read(CFG_I2C_8574_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0) - printf("%u.%u (PCF8475)\n", (i2c_data & 0x02) >> 1, i2c_data & 0x01); - else { - printf("Unknown\n"); - rc = 1; - } - -#ifdef CFG_I2C_EEPROM_ADDR - i2c_set_bus_num(0); - - if (i2c_read(CFG_I2C_EEPROM_ADDR, 0, 2, data, sizeof(data)) == 0) { - if (memcmp(data, eeprom_data, sizeof(data)) != 0) { - if (i2c_write - (CFG_I2C_EEPROM_ADDR, 0, 2, eeprom_data, - sizeof(eeprom_data)) != 0) { - puts("Failure writing the HRCW to EEPROM via I2C.\n"); - rc = 1; - } - } - } else { - puts("Failure reading the HRCW from EEPROM via I2C.\n"); - rc = 1; - } -#endif - -#ifdef CFG_I2C_RTC_ADDR - i2c_set_bus_num(1); - - if (i2c_read(CFG_I2C_RTC_ADDR, 0, 1, ds1339_data, sizeof(ds1339_data)) - == 0) { - - /* Work-around for MPC8349E-mITX bug #13601. - If the RTC does not contain valid register values, the DS1339 - Linux driver will not work. - */ - - /* Make sure status register bits 6-2 are zero */ - ds1339_data[0x0f] &= ~0x7c; - - /* Check for a valid day register value */ - ds1339_data[0x03] &= ~0xf8; - if (ds1339_data[0x03] == 0) { - ds1339_data[0x03] = 1; - } - - /* Check for a valid date register value */ - ds1339_data[0x04] &= ~0xc0; - if ((ds1339_data[0x04] == 0) || - ((ds1339_data[0x04] & 0x0f) > 9) || - (ds1339_data[0x04] >= 0x32)) { - ds1339_data[0x04] = 1; - } - - /* Check for a valid month register value */ - ds1339_data[0x05] &= ~0x60; - - if ((ds1339_data[0x05] == 0) || - ((ds1339_data[0x05] & 0x0f) > 9) || - ((ds1339_data[0x05] >= 0x13) - && (ds1339_data[0x05] <= 0x19))) { - ds1339_data[0x05] = 1; - } - - /* Enable Oscillator and rate select */ - ds1339_data[0x0e] = 0x1c; - - /* Work-around for MPC8349E-mITX bug #13330. - Ensure that the RTC control register contains the value 0x1c. - This affects SATA performance. - */ - - if (i2c_write - (CFG_I2C_RTC_ADDR, 0, 1, ds1339_data, - sizeof(ds1339_data))) { - puts("Failure writing to the RTC via I2C.\n"); - rc = 1; - } - } else { - puts("Failure reading from the RTC via I2C.\n"); - rc = 1; - } -#endif - - i2c_set_bus_num(orig_bus); -#endif - - return rc; -} - -#if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) -{ -#if defined(CONFIG_OF_FLAT_TREE) - u32 *p; - int len; - - p = ft_get_prop(blob, "/memory/reg", &len); - if (p != NULL) { - *p++ = cpu_to_be32(bd->bi_memstart); - *p = cpu_to_be32(bd->bi_memsize); - } -#endif - ft_cpu_setup(blob, bd); -#ifdef CONFIG_PCI - ft_pci_setup(blob, bd); -#endif -} -#endif diff --git a/board/mpc8349itx/pci.c b/board/mpc8349itx/pci.c deleted file mode 100644 index 5ca094d4cbc..00000000000 --- a/board/mpc8349itx/pci.c +++ /dev/null @@ -1,392 +0,0 @@ -/* - * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include - -#ifdef CONFIG_PCI - -#include -#include -#include -#include -#include -#if defined(CONFIG_OF_FLAT_TREE) -#include -#elif defined(CONFIG_OF_LIBFDT) -#include -#endif - -DECLARE_GLOBAL_DATA_PTR; - -/* System RAM mapped to PCI space */ -#define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE -#define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE - -#ifndef CONFIG_PCI_PNP -static struct pci_config_table pci_mpc8349itx_config_table[] = { - { - PCI_ANY_ID, - PCI_ANY_ID, - PCI_ANY_ID, - PCI_ANY_ID, - PCI_IDSEL_NUMBER, - PCI_ANY_ID, - pci_cfgfunc_config_device, - { - PCI_ENET0_IOADDR, - PCI_ENET0_MEMADDR, - PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER} - }, - {} -}; -#endif - -static struct pci_controller pci_hose[] = { - { -#ifndef CONFIG_PCI_PNP - config_table:pci_mpc8349itx_config_table, -#endif - }, - { -#ifndef CONFIG_PCI_PNP - config_table:pci_mpc8349itx_config_table, -#endif - } -}; - -/************************************************************************** - * pci_init_board() - * - * NOTICE: PCI2 is not currently supported - * - */ -void pci_init_board(void) -{ - volatile immap_t *immr; - volatile clk83xx_t *clk; - volatile law83xx_t *pci_law; - volatile pot83xx_t *pci_pot; - volatile pcictrl83xx_t *pci_ctrl; - volatile pciconf83xx_t *pci_conf; - u8 reg8; - u16 reg16; - u32 reg32; - u32 dev; - struct pci_controller *hose; - - immr = (immap_t *) CFG_IMMR; - clk = (clk83xx_t *) & immr->clk; - pci_law = immr->sysconf.pcilaw; - pci_pot = immr->ios.pot; - pci_ctrl = immr->pci_ctrl; - pci_conf = immr->pci_conf; - - hose = &pci_hose[0]; - - /* - * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode - */ - - reg32 = clk->occr; - udelay(2000); - -#ifdef CONFIG_HARD_I2C - i2c_set_bus_num(1); - /* Read the PCI_M66EN jumper setting */ - if ((i2c_read(CFG_I2C_8574_ADDR2, 0, 0, ®8, sizeof(reg8)) == 0) || - (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, ®8, sizeof(reg8)) == 0)) { - if (reg8 & I2C_8574_PCI66) - clk->occr = 0xff000000; /* 66 MHz PCI */ - else - clk->occr = 0xff600001; /* 33 MHz PCI */ - } else { - clk->occr = 0xff600001; /* 33 MHz PCI */ - } -#else - clk->occr = 0xff000000; /* 66 MHz PCI */ -#endif - - udelay(2000); - - /* - * Release PCI RST Output signal - */ - pci_ctrl[0].gcr = 0; - udelay(2000); - pci_ctrl[0].gcr = 1; - -#ifdef CONFIG_MPC83XX_PCI2 - pci_ctrl[1].gcr = 0; - udelay(2000); - pci_ctrl[1].gcr = 1; -#endif - - /* We need to wait at least a 1sec based on PCI specs */ - { - int i; - - for (i = 0; i < 1000; i++) - udelay(1000); - } - - /* - * Configure PCI Local Access Windows - */ - pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR; - pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G; - - pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR; - pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_32M; - - /* - * Configure PCI Outbound Translation Windows - */ - - /* PCI1 mem space - prefetch */ - pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK; - pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[0].pocmr = POCMR_EN | POCMR_PREFETCH_EN | POCMR_CM_256M; - - /* PCI1 IO space */ - pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK; - pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[1].pocmr = POCMR_EN | POCMR_IO | POCMR_CM_16M; - - /* PCI1 mmio - non-prefetch mem space */ - pci_pot[2].potar = (CFG_PCI1_MMIO_BASE >> 12) & POTAR_TA_MASK; - pci_pot[2].pobar = (CFG_PCI1_MMIO_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[2].pocmr = POCMR_EN | POCMR_CM_256M; - - /* - * Configure PCI Inbound Translation Windows - */ - - /* we need RAM mapped to PCI space for the devices to - * access main memory */ - pci_ctrl[0].pitar1 = 0x0; - pci_ctrl[0].pibar1 = 0x0; - pci_ctrl[0].piebar1 = 0x0; - pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | - PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1); - - hose->first_busno = 0; - hose->last_busno = 0xff; - - /* PCI memory prefetch space */ - pci_set_region(hose->regions + 0, - CFG_PCI1_MEM_BASE, - CFG_PCI1_MEM_PHYS, - CFG_PCI1_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); - - /* PCI memory space */ - pci_set_region(hose->regions + 1, - CFG_PCI1_MMIO_BASE, - CFG_PCI1_MMIO_PHYS, CFG_PCI1_MMIO_SIZE, PCI_REGION_MEM); - - /* PCI IO space */ - pci_set_region(hose->regions + 2, - CFG_PCI1_IO_BASE, - CFG_PCI1_IO_PHYS, CFG_PCI1_IO_SIZE, PCI_REGION_IO); - - /* System memory space */ - pci_set_region(hose->regions + 3, - CONFIG_PCI_SYS_MEM_BUS, - CONFIG_PCI_SYS_MEM_PHYS, - gd->ram_size, PCI_REGION_MEM | PCI_REGION_MEMORY); - - hose->region_count = 4; - - pci_setup_indirect(hose, - (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); - - pci_register_hose(hose); - - /* - * Write to Command register - */ - reg16 = 0xff; - dev = PCI_BDF(hose->first_busno, 0, 0); - pci_hose_read_config_word(hose, dev, PCI_COMMAND, ®16); - reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); - - /* - * Clear non-reserved bits in status register. - */ - pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); - pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); - pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); - -#ifdef CONFIG_PCI_SCAN_SHOW - printf("PCI: Bus Dev VenId DevId Class Int\n"); -#endif - /* - * Hose scan. - */ - hose->last_busno = pci_hose_scan(hose); - -#ifdef CONFIG_MPC83XX_PCI2 - hose = &pci_hose[1]; - - /* - * Configure PCI Outbound Translation Windows - */ - - /* PCI2 mem space - prefetch */ - pci_pot[3].potar = (CFG_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK; - pci_pot[3].pobar = (CFG_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[3].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_PREFETCH_EN | POCMR_CM_256M; - - /* PCI2 IO space */ - pci_pot[4].potar = (CFG_PCI2_IO_BASE >> 12) & POTAR_TA_MASK; - pci_pot[4].pobar = (CFG_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[4].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_IO | POCMR_CM_16M; - - /* PCI2 mmio - non-prefetch mem space */ - pci_pot[5].potar = (CFG_PCI2_MMIO_BASE >> 12) & POTAR_TA_MASK; - pci_pot[5].pobar = (CFG_PCI2_MMIO_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[5].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_CM_256M; - - /* - * Configure PCI Inbound Translation Windows - */ - - /* we need RAM mapped to PCI space for the devices to - * access main memory */ - pci_ctrl[1].pitar1 = 0x0; - pci_ctrl[1].pibar1 = 0x0; - pci_ctrl[1].piebar1 = 0x0; - pci_ctrl[1].piwar1 = - PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | - (__ilog2(gd->ram_size) - 1); - - hose->first_busno = pci_hose[0].last_busno + 1; - hose->last_busno = 0xff; - - /* PCI memory prefetch space */ - pci_set_region(hose->regions + 0, - CFG_PCI2_MEM_BASE, - CFG_PCI2_MEM_PHYS, - CFG_PCI2_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); - - /* PCI memory space */ - pci_set_region(hose->regions + 1, - CFG_PCI2_MMIO_BASE, - CFG_PCI2_MMIO_PHYS, CFG_PCI2_MMIO_SIZE, PCI_REGION_MEM); - - /* PCI IO space */ - pci_set_region(hose->regions + 2, - CFG_PCI2_IO_BASE, - CFG_PCI2_IO_PHYS, CFG_PCI2_IO_SIZE, PCI_REGION_IO); - - /* System memory space */ - pci_set_region(hose->regions + 3, - CONFIG_PCI_SYS_MEM_BUS, - CONFIG_PCI_SYS_MEM_PHYS, - gd->ram_size, PCI_REGION_MEM | PCI_REGION_MEMORY); - - hose->region_count = 4; - - pci_setup_indirect(hose, - (CFG_IMMR + 0x8380), (CFG_IMMR + 0x8384)); - - pci_register_hose(hose); - - /* - * Write to Command register - */ - reg16 = 0xff; - dev = PCI_BDF(hose->first_busno, 0, 0); - pci_hose_read_config_word(hose, dev, PCI_COMMAND, ®16); - reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); - - /* - * Clear non-reserved bits in status register. - */ - pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); - pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); - pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); - - /* - * Hose scan. - */ - hose->last_busno = pci_hose_scan(hose); -#endif -} - -#if defined(CONFIG_OF_LIBFDT) -void -ft_pci_setup(void *blob, bd_t *bd) -{ - int nodeoffset; - int err; - int tmp[2]; - - nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500"); - if (nodeoffset >= 0) { - tmp[0] = cpu_to_be32(pci_hose[0].first_busno); - tmp[1] = cpu_to_be32(pci_hose[0].last_busno); - err = fdt_setprop(blob, nodeoffset, "bus-range", - tmp, sizeof(tmp)); - - tmp[0] = cpu_to_be32(gd->pci_clk); - err = fdt_setprop(blob, nodeoffset, "clock-frequency", - tmp, sizeof(tmp[0])); - } -#ifdef CONFIG_MPC83XX_PCI2 - nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500"); - if (nodeoffset >= 0) { - tmp[0] = cpu_to_be32(pci_hose[1].first_busno); - tmp[1] = cpu_to_be32(pci_hose[1].last_busno); - err = fdt_setprop(blob, nodeoffset, "bus-range", - tmp, sizeof(tmp)); - - tmp[0] = cpu_to_be32(gd->pci_clk); - err = fdt_setprop(blob, nodeoffset, "clock-frequency", - tmp, sizeof(tmp[0])); - } -#endif -} -#elif defined(CONFIG_OF_FLAT_TREE) -void -ft_pci_setup(void *blob, bd_t *bd) -{ - u32 *p; - int len; - - p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len); - if (p != NULL) { - p[0] = pci_hose[0].first_busno; - p[1] = pci_hose[0].last_busno; - } - -#ifdef CONFIG_MPC83XX_PCI2 - p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8600/bus-range", &len); - if (p != NULL) { - p[0] = pci_hose[1].first_busno; - p[1] = pci_hose[1].last_busno; - } -#endif -} -#endif /* CONFIG_OF_FLAT_TREE */ -#endif /* CONFIG_PCI */ diff --git a/board/mpc8360emds/Makefile b/board/mpc8360emds/Makefile deleted file mode 100644 index 4da74b8277e..00000000000 --- a/board/mpc8360emds/Makefile +++ /dev/null @@ -1,50 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).a - -COBJS := $(BOARD).o pci.o ../freescale/common/pq-mds-pib.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/mpc8360emds/config.mk b/board/mpc8360emds/config.mk deleted file mode 100644 index 9ace8860cfd..00000000000 --- a/board/mpc8360emds/config.mk +++ /dev/null @@ -1,28 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# MPC8360EMDS -# - -TEXT_BASE = 0xFE000000 diff --git a/board/mpc8360emds/mpc8360emds.c b/board/mpc8360emds/mpc8360emds.c deleted file mode 100644 index 0751c6fafdb..00000000000 --- a/board/mpc8360emds/mpc8360emds.c +++ /dev/null @@ -1,313 +0,0 @@ -/* - * Copyright (C) 2006 Freescale Semiconductor, Inc. - * Dave Liu - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#if defined(CONFIG_PCI) -#include -#endif -#if defined(CONFIG_SPD_EEPROM) -#include -#else -#include -#endif -#if defined(CONFIG_OF_FLAT_TREE) -#include -#elif defined(CONFIG_OF_LIBFDT) -#include -#endif -#if defined(CONFIG_PQ_MDS_PIB) -#include "../freescale/common/pq-mds-pib.h" -#endif - -const qe_iop_conf_t qe_iop_conf_tab[] = { - /* GETH1 */ - {0, 3, 1, 0, 1}, /* TxD0 */ - {0, 4, 1, 0, 1}, /* TxD1 */ - {0, 5, 1, 0, 1}, /* TxD2 */ - {0, 6, 1, 0, 1}, /* TxD3 */ - {1, 6, 1, 0, 3}, /* TxD4 */ - {1, 7, 1, 0, 1}, /* TxD5 */ - {1, 9, 1, 0, 2}, /* TxD6 */ - {1, 10, 1, 0, 2}, /* TxD7 */ - {0, 9, 2, 0, 1}, /* RxD0 */ - {0, 10, 2, 0, 1}, /* RxD1 */ - {0, 11, 2, 0, 1}, /* RxD2 */ - {0, 12, 2, 0, 1}, /* RxD3 */ - {0, 13, 2, 0, 1}, /* RxD4 */ - {1, 1, 2, 0, 2}, /* RxD5 */ - {1, 0, 2, 0, 2}, /* RxD6 */ - {1, 4, 2, 0, 2}, /* RxD7 */ - {0, 7, 1, 0, 1}, /* TX_EN */ - {0, 8, 1, 0, 1}, /* TX_ER */ - {0, 15, 2, 0, 1}, /* RX_DV */ - {0, 16, 2, 0, 1}, /* RX_ER */ - {0, 0, 2, 0, 1}, /* RX_CLK */ - {2, 9, 1, 0, 3}, /* GTX_CLK - CLK10 */ - {2, 8, 2, 0, 1}, /* GTX125 - CLK9 */ - /* GETH2 */ - {0, 17, 1, 0, 1}, /* TxD0 */ - {0, 18, 1, 0, 1}, /* TxD1 */ - {0, 19, 1, 0, 1}, /* TxD2 */ - {0, 20, 1, 0, 1}, /* TxD3 */ - {1, 2, 1, 0, 1}, /* TxD4 */ - {1, 3, 1, 0, 2}, /* TxD5 */ - {1, 5, 1, 0, 3}, /* TxD6 */ - {1, 8, 1, 0, 3}, /* TxD7 */ - {0, 23, 2, 0, 1}, /* RxD0 */ - {0, 24, 2, 0, 1}, /* RxD1 */ - {0, 25, 2, 0, 1}, /* RxD2 */ - {0, 26, 2, 0, 1}, /* RxD3 */ - {0, 27, 2, 0, 1}, /* RxD4 */ - {1, 12, 2, 0, 2}, /* RxD5 */ - {1, 13, 2, 0, 3}, /* RxD6 */ - {1, 11, 2, 0, 2}, /* RxD7 */ - {0, 21, 1, 0, 1}, /* TX_EN */ - {0, 22, 1, 0, 1}, /* TX_ER */ - {0, 29, 2, 0, 1}, /* RX_DV */ - {0, 30, 2, 0, 1}, /* RX_ER */ - {0, 31, 2, 0, 1}, /* RX_CLK */ - {2, 2, 1, 0, 2}, /* GTX_CLK = CLK10 */ - {2, 3, 2, 0, 1}, /* GTX125 - CLK4 */ - - {0, 1, 3, 0, 2}, /* MDIO */ - {0, 2, 1, 0, 1}, /* MDC */ - - {0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */ -}; - -int board_early_init_f(void) -{ - - u8 *bcsr = (u8 *)CFG_BCSR; - const immap_t *immr = (immap_t *)CFG_IMMR; - - /* Enable flash write */ - bcsr[0xa] &= ~0x04; - - /* Disable G1TXCLK, G2TXCLK h/w buffers (rev.2 h/w bug workaround) */ - if (immr->sysconf.spridr == SPR_8360_REV20 || - immr->sysconf.spridr == SPR_8360E_REV20 || - immr->sysconf.spridr == SPR_8360_REV21 || - immr->sysconf.spridr == SPR_8360E_REV21) - bcsr[0xe] = 0x30; - - return 0; -} - -int board_early_init_r(void) -{ -#ifdef CONFIG_PQ_MDS_PIB - pib_init(); -#endif - return 0; -} - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) -extern void ddr_enable_ecc(unsigned int dram_size); -#endif -int fixed_sdram(void); -void sdram_init(void); - -long int initdram(int board_type) -{ - volatile immap_t *im = (immap_t *) CFG_IMMR; - u32 msize = 0; - - if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) - return -1; - - /* DDR SDRAM - Main SODIMM */ - im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; -#if defined(CONFIG_SPD_EEPROM) - msize = spd_sdram(); -#else - msize = fixed_sdram(); -#endif - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) - /* - * Initialize DDR ECC byte - */ - ddr_enable_ecc(msize * 1024 * 1024); -#endif - /* - * Initialize SDRAM if it is on local bus. - */ - sdram_init(); - - /* return total bus SDRAM size(bytes) -- DDR */ - return (msize * 1024 * 1024); -} - -#if !defined(CONFIG_SPD_EEPROM) -/************************************************************************* - * fixed sdram init -- doesn't use serial presence detect. - ************************************************************************/ -int fixed_sdram(void) -{ - volatile immap_t *im = (immap_t *) CFG_IMMR; - u32 msize = 0; - u32 ddr_size; - u32 ddr_size_log2; - - msize = CFG_DDR_SIZE; - for (ddr_size = msize << 20, ddr_size_log2 = 0; - (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) { - if (ddr_size & 1) { - return -1; - } - } - im->sysconf.ddrlaw[0].ar = - LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); -#if (CFG_DDR_SIZE != 256) -#warning Currenly any ddr size other than 256 is not supported -#endif -#ifdef CONFIG_DDR_II - im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS; - im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG; - im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; - im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; - im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; - im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; - im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG; - im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2; - im->ddr.sdram_mode = CFG_DDR_MODE; - im->ddr.sdram_mode2 = CFG_DDR_MODE2; - im->ddr.sdram_interval = CFG_DDR_INTERVAL; - im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL; -#else - im->ddr.csbnds[0].csbnds = 0x00000007; - im->ddr.csbnds[1].csbnds = 0x0008000f; - - im->ddr.cs_config[0] = CFG_DDR_CONFIG; - im->ddr.cs_config[1] = CFG_DDR_CONFIG; - - im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; - im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; - im->ddr.sdram_cfg = CFG_DDR_CONTROL; - - im->ddr.sdram_mode = CFG_DDR_MODE; - im->ddr.sdram_interval = CFG_DDR_INTERVAL; -#endif - udelay(200); - im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; - - return msize; -} -#endif /*!CFG_SPD_EEPROM */ - -int checkboard(void) -{ - puts("Board: Freescale MPC8360EMDS\n"); - return 0; -} - -/* - * if MPC8360EMDS is soldered with SDRAM - */ -#if defined(CFG_BR2_PRELIM) \ - && defined(CFG_OR2_PRELIM) \ - && defined(CFG_LBLAWBAR2_PRELIM) \ - && defined(CFG_LBLAWAR2_PRELIM) -/* - * Initialize SDRAM memory on the Local Bus. - */ - -void sdram_init(void) -{ - volatile immap_t *immap = (immap_t *) CFG_IMMR; - volatile lbus83xx_t *lbc = &immap->lbus; - uint *sdram_addr = (uint *) CFG_LBC_SDRAM_BASE; - - /* - * Setup SDRAM Base and Option Registers, already done in cpu_init.c - */ - /*setup mtrpt, lsrt and lbcr for LB bus */ - lbc->lbcr = CFG_LBC_LBCR; - lbc->mrtpr = CFG_LBC_MRTPR; - lbc->lsrt = CFG_LBC_LSRT; - asm("sync"); - - /* - * Configure the SDRAM controller Machine Mode Register. - */ - lbc->lsdmr = CFG_LBC_LSDMR_5; /* Normal Operation */ - lbc->lsdmr = CFG_LBC_LSDMR_1; /* Precharge All Banks */ - asm("sync"); - *sdram_addr = 0xff; - udelay(100); - - /* - * We need do 8 times auto refresh operation. - */ - lbc->lsdmr = CFG_LBC_LSDMR_2; - asm("sync"); - *sdram_addr = 0xff; /* 1 times */ - udelay(100); - *sdram_addr = 0xff; /* 2 times */ - udelay(100); - *sdram_addr = 0xff; /* 3 times */ - udelay(100); - *sdram_addr = 0xff; /* 4 times */ - udelay(100); - *sdram_addr = 0xff; /* 5 times */ - udelay(100); - *sdram_addr = 0xff; /* 6 times */ - udelay(100); - *sdram_addr = 0xff; /* 7 times */ - udelay(100); - *sdram_addr = 0xff; /* 8 times */ - udelay(100); - - /* Mode register write operation */ - lbc->lsdmr = CFG_LBC_LSDMR_4; - asm("sync"); - *(sdram_addr + 0xcc) = 0xff; - udelay(100); - - /* Normal operation */ - lbc->lsdmr = CFG_LBC_LSDMR_5 | 0x40000000; - asm("sync"); - *sdram_addr = 0xff; - udelay(100); -} -#else -void sdram_init(void) -{ -} -#endif - -#if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) -{ -#if defined(CONFIG_OF_FLAT_TREE) - u32 *p; - int len; - - p = ft_get_prop(blob, "/memory/reg", &len); - if (p != NULL) { - *p++ = cpu_to_be32(bd->bi_memstart); - *p = cpu_to_be32(bd->bi_memsize); - } -#endif - ft_cpu_setup(blob, bd); -#ifdef CONFIG_PCI - ft_pci_setup(blob, bd); -#endif -} -#endif diff --git a/board/mpc8360emds/pci.c b/board/mpc8360emds/pci.c deleted file mode 100644 index cf7ef90443f..00000000000 --- a/board/mpc8360emds/pci.c +++ /dev/null @@ -1,298 +0,0 @@ -/* - * Copyright (C) 2006 Freescale Semiconductor, Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - */ - -/* - * PCI Configuration space access support for MPC83xx PCI Bridge - */ -#include -#include -#include -#include -#include -#if defined(CONFIG_OF_FLAT_TREE) -#include -#elif defined(CONFIG_OF_LIBFDT) -#include -#endif - -#include - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_PCI) -#define PCI_FUNCTION_CONFIG 0x44 -#define PCI_FUNCTION_CFG_LOCK 0x20 - -/* - * Initialize PCI Devices, report devices found - */ -#ifndef CONFIG_PCI_PNP -static struct pci_config_table pci_mpc83xxemds_config_table[] = { - { - PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, - pci_cfgfunc_config_device, - {PCI_ENET0_IOADDR, - PCI_ENET0_MEMADDR, - PCI_COMMON_MEMORY | PCI_COMMAND_MASTER} - }, - {} -} -#endif -static struct pci_controller hose[] = { - { -#ifndef CONFIG_PCI_PNP - config_table:pci_mpc83xxemds_config_table, -#endif - }, -}; - -/********************************************************************** - * pci_init_board() - *********************************************************************/ -void pci_init_board(void) -#ifdef CONFIG_PCISLAVE -{ - u16 reg16; - volatile immap_t *immr; - volatile law83xx_t *pci_law; - volatile pot83xx_t *pci_pot; - volatile pcictrl83xx_t *pci_ctrl; - volatile pciconf83xx_t *pci_conf; - - immr = (immap_t *) CFG_IMMR; - pci_law = immr->sysconf.pcilaw; - pci_pot = immr->ios.pot; - pci_ctrl = immr->pci_ctrl; - pci_conf = immr->pci_conf; - /* - * Configure PCI Inbound Translation Windows - */ - pci_ctrl[0].pitar0 = 0x0; - pci_ctrl[0].pibar0 = 0x0; - pci_ctrl[0].piwar0 = PIWAR_EN | PIWAR_RTT_SNOOP | - PIWAR_WTT_SNOOP | PIWAR_IWS_4K; - - pci_ctrl[0].pitar1 = 0x0; - pci_ctrl[0].pibar1 = 0x0; - pci_ctrl[0].piebar1 = 0x0; - pci_ctrl[0].piwar1 &= ~PIWAR_EN; - - pci_ctrl[0].pitar2 = 0x0; - pci_ctrl[0].pibar2 = 0x0; - pci_ctrl[0].piebar2 = 0x0; - pci_ctrl[0].piwar2 &= ~PIWAR_EN; - - hose[0].first_busno = 0; - hose[0].last_busno = 0xff; - pci_setup_indirect(&hose[0], - (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); - reg16 = 0xff; - - pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), - PCI_COMMAND, ®16); - reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MEMORY; - pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), - PCI_COMMAND, reg16); - - /* - * Clear non-reserved bits in status register. - */ - pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), - PCI_STATUS, 0xffff); - pci_hose_write_config_byte(&hose[0], PCI_BDF(0, 0, 0), - PCI_LATENCY_TIMER, 0x80); - - /* - * Unlock configuration lock in PCI function configuration register. - */ - pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), - PCI_FUNCTION_CONFIG, ®16); - reg16 &= ~(PCI_FUNCTION_CFG_LOCK); - pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), - PCI_FUNCTION_CONFIG, reg16); - - printf("Enabled PCI 32bit Agent Mode\n"); -} -#else -{ - volatile immap_t *immr; - volatile clk83xx_t *clk; - volatile law83xx_t *pci_law; - volatile pot83xx_t *pci_pot; - volatile pcictrl83xx_t *pci_ctrl; - volatile pciconf83xx_t *pci_conf; - - u16 reg16; - u32 val32; - u32 dev; - - immr = (immap_t *) CFG_IMMR; - clk = (clk83xx_t *) & immr->clk; - pci_law = immr->sysconf.pcilaw; - pci_pot = immr->ios.pot; - pci_ctrl = immr->pci_ctrl; - pci_conf = immr->pci_conf; - /* - * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode - */ - val32 = clk->occr; - udelay(2000); -#if defined(PCI_66M) - clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2; - printf("PCI clock is 66MHz\n"); -#elif defined(PCI_33M) - clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 | - OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICR; - printf("PCI clock is 33MHz\n"); -#else - clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2; - printf("PCI clock is 66MHz\n"); -#endif - udelay(2000); - - /* - * Configure PCI Local Access Windows - */ - pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR; - pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M; - - pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR; - pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_1M; - - /* - * Configure PCI Outbound Translation Windows - */ - - /* PCI mem space - prefetch */ - pci_pot[0].potar = (CFG_PCI_MEM_BASE >> 12) & POTAR_TA_MASK; - pci_pot[0].pobar = (CFG_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[0].pocmr = - POCMR_EN | POCMR_SE | (POCMR_CM_256M & POCMR_CM_MASK); - - /* PCI mmio - non-prefetch mem space */ - pci_pot[1].potar = (CFG_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK; - pci_pot[1].pobar = (CFG_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[1].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK); - - /* PCI IO space */ - pci_pot[2].potar = (CFG_PCI_IO_BASE >> 12) & POTAR_TA_MASK; - pci_pot[2].pobar = (CFG_PCI_IO_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[2].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); - - /* - * Configure PCI Inbound Translation Windows - */ - pci_ctrl[0].pitar1 = (CFG_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK; - pci_ctrl[0].pibar1 = (CFG_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK; - pci_ctrl[0].piebar1 = 0x0; - pci_ctrl[0].piwar1 = - PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | - PIWAR_IWS_2G; - - /* - * Release PCI RST Output signal - */ - udelay(2000); - pci_ctrl[0].gcr = 1; - udelay(2000); - - hose[0].first_busno = 0; - hose[0].last_busno = 0xff; - - /* PCI memory prefetch space */ - pci_set_region(hose[0].regions + 0, - CFG_PCI_MEM_BASE, - CFG_PCI_MEM_PHYS, - CFG_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); - - /* PCI memory space */ - pci_set_region(hose[0].regions + 1, - CFG_PCI_MMIO_BASE, - CFG_PCI_MMIO_PHYS, CFG_PCI_MMIO_SIZE, PCI_REGION_MEM); - - /* PCI IO space */ - pci_set_region(hose[0].regions + 2, - CFG_PCI_IO_BASE, - CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO); - - /* System memory space */ - pci_set_region(hose[0].regions + 3, - CFG_PCI_SLV_MEM_LOCAL, - CFG_PCI_SLV_MEM_BUS, - CFG_PCI_SLV_MEM_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); - - hose[0].region_count = 4; - - pci_setup_indirect(&hose[0], - (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); - - pci_register_hose(hose); - - /* - * Write command register - */ - reg16 = 0xff; - dev = PCI_BDF(0, 0, 0); - pci_hose_read_config_word(&hose[0], dev, PCI_COMMAND, ®16); - reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - pci_hose_write_config_word(&hose[0], dev, PCI_COMMAND, reg16); - - /* - * Clear non-reserved bits in status register. - */ - pci_hose_write_config_word(&hose[0], dev, PCI_STATUS, 0xffff); - pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80); - pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08); - - /* - * Hose scan. - */ - hose->last_busno = pci_hose_scan(hose); -} -#endif /* CONFIG_PCISLAVE */ - -#if defined(CONFIG_OF_LIBFDT) -void -ft_pci_setup(void *blob, bd_t *bd) -{ - int nodeoffset; - int err; - int tmp[2]; - - nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500"); - if (nodeoffset >= 0) { - tmp[0] = cpu_to_be32(hose[0].first_busno); - tmp[1] = cpu_to_be32(hose[0].last_busno); - err = fdt_setprop(blob, nodeoffset, "bus-range", - tmp, sizeof(tmp)); - - tmp[0] = cpu_to_be32(gd->pci_clk); - err = fdt_setprop(blob, nodeoffset, "clock-frequency", - tmp, sizeof(tmp[0])); - } -} -#elif defined(CONFIG_OF_FLAT_TREE) -void -ft_pci_setup(void *blob, bd_t *bd) -{ - u32 *p; - int len; - - p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len); - if (p != NULL) { - p[0] = hose[0].first_busno; - p[1] = hose[0].last_busno; - } -} -#endif /* CONFIG_OF_FLAT_TREE */ -#endif /* CONFIG_PCI */ -- cgit v1.3.1 From 4a442d3186b31893b4f77c6e82f63c4517a5224b Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 16 Aug 2007 19:23:50 -0500 Subject: ColdFire: Add M5235EVB Platform for MCF523x Signed-off-by: TsiChungLiew --- CREDITS | 2 +- MAINTAINERS | 1 + MAKEALL | 1 + Makefile | 25 +- board/freescale/m5235evb/Makefile | 44 ++ board/freescale/m5235evb/config.mk | 28 ++ board/freescale/m5235evb/m5235evb.c | 117 +++++ board/freescale/m5235evb/mii.c | 307 ++++++++++++ board/freescale/m5235evb/u-boot.16 | 145 ++++++ board/freescale/m5235evb/u-boot.32 | 153 ++++++ board/freescale/m5235evb/u-boot.lds | 145 ++++++ cpu/mcf523x/Makefile | 48 ++ cpu/mcf523x/config.mk | 27 ++ cpu/mcf523x/cpu.c | 109 +++++ cpu/mcf523x/cpu_init.c | 145 ++++++ cpu/mcf523x/interrupts.c | 49 ++ cpu/mcf523x/speed.c | 48 ++ cpu/mcf523x/start.S | 340 ++++++++++++++ include/asm-m68k/immap.h | 29 ++ include/asm-m68k/immap_5235.h | 378 +++++++++++++++ include/asm-m68k/m5235.h | 905 ++++++++++++++++++++++++++++++++++++ include/configs/M5235EVB.h | 261 +++++++++++ 22 files changed, 3303 insertions(+), 4 deletions(-) create mode 100644 board/freescale/m5235evb/Makefile create mode 100644 board/freescale/m5235evb/config.mk create mode 100644 board/freescale/m5235evb/m5235evb.c create mode 100644 board/freescale/m5235evb/mii.c create mode 100644 board/freescale/m5235evb/u-boot.16 create mode 100644 board/freescale/m5235evb/u-boot.32 create mode 100644 board/freescale/m5235evb/u-boot.lds create mode 100644 cpu/mcf523x/Makefile create mode 100644 cpu/mcf523x/config.mk create mode 100644 cpu/mcf523x/cpu.c create mode 100644 cpu/mcf523x/cpu_init.c create mode 100644 cpu/mcf523x/interrupts.c create mode 100644 cpu/mcf523x/speed.c create mode 100644 cpu/mcf523x/start.S create mode 100644 include/asm-m68k/immap_5235.h create mode 100644 include/asm-m68k/m5235.h create mode 100644 include/configs/M5235EVB.h (limited to 'Makefile') diff --git a/CREDITS b/CREDITS index f30b2228fbb..6e44db47085 100644 --- a/CREDITS +++ b/CREDITS @@ -491,7 +491,7 @@ W: www.monstr.eu N: TsiChung Liew E: Tsi-Chung.Liew@freescale.com -D: Support for ColdFire MCF532x, MCF5445x +D: Support for ColdFire MCF523x, MCF532x, MCF5445x W: www.freescale.com N: Hayden Fraser diff --git a/MAINTAINERS b/MAINTAINERS index 7fde6d99efe..d15028665ef 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -608,6 +608,7 @@ Zachary P. Landau TsiChung Liew + M5235EVB mcf52x2 M5329EVB mcf532x M54455EVB mcf5445x diff --git a/MAKEALL b/MAKEALL index b7ed0f4305c..125c78275ea 100755 --- a/MAKEALL +++ b/MAKEALL @@ -618,6 +618,7 @@ LIST_coldfire=" \ EB+MCF-EV123 \ EB+MCF-EV123_internal \ idmr \ + M5235EVB \ M5249EVB \ M5253EVB \ M5271EVB \ diff --git a/Makefile b/Makefile index 201ad0e7789..7b2b0252dac 100644 --- a/Makefile +++ b/Makefile @@ -1639,6 +1639,25 @@ ZPC1900_config: unconfig ## Coldfire ######################################################################### +M5235EVB_config \ +M5235EVB_Flash16_config \ +M5235EVB_Flash32_config: unconfig + @case "$@" in \ + M5235EVB_config) FLASH=16;; \ + M5235EVB_Flash16_config) FLASH=16;; \ + M5235EVB_Flash32_config) FLASH=32;; \ + esac; \ + >include/config.h ; \ + if [ "$${FLASH}" != "16" ] ; then \ + echo "#define NORFLASH_PS32BIT 1" >> include/config.h ; \ + echo "TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \ + cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \ + else \ + echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \ + cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \ + fi + @$(MKCONFIG) -a M5235EVB m68k mcf523x m5235evb freescale + M5249EVB_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale @@ -1710,13 +1729,13 @@ M54455EVB_i66_config : unconfig esac; \ >include/config.h ; \ if [ "$${FLASH}" == "INTEL" ] ; then \ - echo "#undef CFG_ATMEL_BOOT" >> include/config.h ; \ + echo "#undef CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \ echo "... with INTEL boot..." ; \ else \ - echo "#define CFG_ATMEL_BOOT" >> include/config.h ; \ + echo "#define CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \ echo "... with ATMEL boot..." ; \ fi; \ - echo "#define CFG_INPUT_CLKSRC $${FREQ}" >>include/config.h ; \ + echo "#define CFG_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \ echo "... with $${FREQ}Hz input clock" @$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale diff --git a/board/freescale/m5235evb/Makefile b/board/freescale/m5235evb/Makefile new file mode 100644 index 00000000000..74c25286982 --- /dev/null +++ b/board/freescale/m5235evb/Makefile @@ -0,0 +1,44 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o mii.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/m5235evb/config.mk b/board/freescale/m5235evb/config.mk new file mode 100644 index 00000000000..ada38dd9513 --- /dev/null +++ b/board/freescale/m5235evb/config.mk @@ -0,0 +1,28 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Coldfire contribution by Bernhard Kuhn +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +/*TEXT_BASE = 0xFFC00000*/ +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp + +PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) \ No newline at end of file diff --git a/board/freescale/m5235evb/m5235evb.c b/board/freescale/m5235evb/m5235evb.c new file mode 100644 index 00000000000..585854cd91b --- /dev/null +++ b/board/freescale/m5235evb/m5235evb.c @@ -0,0 +1,117 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +int checkboard(void) +{ + puts("Board: "); + puts("Freescale M5235 EVB\n"); + return 0; +}; + +long int initdram(int board_type) +{ + volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM); + volatile gpio_t *gpio = (volatile gpio_t *)(MMAP_GPIO); + u32 dramsize, i, dramclk; + + /* + * When booting from external Flash, the port-size is less than + * the port-size of SDRAM. In this case it is necessary to enable + * Data[15:0] on Port Address/Data. + */ + gpio->par_ad = + GPIO_PAR_AD_ADDR23 | GPIO_PAR_AD_ADDR22 | GPIO_PAR_AD_ADDR21 | + GPIO_PAR_AD_DATAL; + + /* Initialize PAR to enable SDRAM signals */ + gpio->par_sdram = + GPIO_PAR_SDRAM_SDWE | GPIO_PAR_SDRAM_SCAS | GPIO_PAR_SDRAM_SRAS | + GPIO_PAR_SDRAM_SCKE | GPIO_PAR_SDRAM_SDCS(3); + + dramsize = CFG_SDRAM_SIZE * 0x100000; + for (i = 0x13; i < 0x20; i++) { + if (dramsize == (1 << i)) + break; + } + i--; + + if (!(sdram->dacr0 & SDRAMC_DARCn_RE)) { + dramclk = gd->bus_clk / (CFG_HZ * CFG_HZ); + + /* Initialize DRAM Control Register: DCR */ + sdram->dcr = SDRAMC_DCR_RTIM_9CLKS | + SDRAMC_DCR_RTIM_6CLKS | SDRAMC_DCR_RC((15 * dramclk) >> 4); + + /* Initialize DACR0 */ + sdram->dacr0 = + SDRAMC_DARCn_BA(CFG_SDRAM_BASE) | SDRAMC_DARCn_CASL_C1 | + SDRAMC_DARCn_CBM_CMD20 | SDRAMC_DARCn_PS_32; + + /* Initialize DMR0 */ + sdram->dmr0 = ((dramsize - 1) & 0xFFFC0000) | SDRAMC_DMRn_V; + + /* Set IP (bit 3) in DACR */ + sdram->dacr0 |= SDRAMC_DARCn_IP; + + /* Wait 30ns to allow banks to precharge */ + for (i = 0; i < 5; i++) { + asm("nop"); + } + + /* Write to this block to initiate precharge */ + *(u32 *) (CFG_SDRAM_BASE) = 0xA5A59696; + + /* Set RE (bit 15) in DACR */ + sdram->dacr0 |= SDRAMC_DARCn_RE; + + /* Wait for at least 8 auto refresh cycles to occur */ + for (i = 0; i < 0x2000; i++) { + asm("nop"); + } + + /* Finish the configuration by issuing the MRS. */ + sdram->dacr0 |= SDRAMC_DARCn_IMRS; + + /* Write to the SDRAM Mode Register */ + *(u32 *) (CFG_SDRAM_BASE + 0x400) = 0xA5A59696; + } + + return dramsize; +}; + +int testdram(void) +{ + /* TODO: XXX XXX XXX */ + printf("DRAM test not implemented!\n"); + + return (0); +} diff --git a/board/freescale/m5235evb/mii.c b/board/freescale/m5235evb/mii.c new file mode 100644 index 00000000000..58fabdf324c --- /dev/null +++ b/board/freescale/m5235evb/mii.c @@ -0,0 +1,307 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) +#undef MII_DEBUG +#undef ET_DEBUG + +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + if (setclear) { + gpio->par_feci2c |= + (GPIO_PAR_FECI2C_EMDC_FECEMDC | GPIO_PAR_FECI2C_EMDIO_FECEMDIO); + } else { + gpio->par_feci2c &= + ~(GPIO_PAR_FECI2C_EMDC_MASK | GPIO_PAR_FECI2C_EMDIO_MASK); + } + + return 0; +} + +#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_MII) +#include + +/* Make MII read/write commands for the FEC. */ +#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) + +#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) + +/* PHY identification */ +#define PHY_ID_LXT970 0x78100000 /* LXT970 */ +#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ +#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ +#define PHY_ID_QS6612 0x01814400 /* QS6612 */ +#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ +#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ +#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ +#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ +#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ +#define PHY_ID_KS8721BL 0x00221619 /* Micrel KS8721BL/SL */ + +#define STR_ID_LXT970 "LXT970" +#define STR_ID_LXT971 "LXT971" +#define STR_ID_82555 "Intel82555" +#define STR_ID_QS6612 "QS6612" +#define STR_ID_AMD79C784 "AMD79C784" +#define STR_ID_LSI80225 "LSI80225" +#define STR_ID_LSI80225B "LSI80225/B" +#define STR_ID_DP83848VV "N83848" +#define STR_ID_DP83849 "N83849" +#define STR_ID_KS8721BL "KS8721BL" + +/**************************************************************************** + * mii_init -- Initialize the MII for MII command without ethernet + * This function is a subset of eth_init + **************************************************************************** + */ +void mii_reset(struct fec_info_s *info) +{ + volatile fec_t *fecp = (fec_t *) (info->miibase); + int i; + + fecp->ecr = FEC_ECR_RESET; + for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { + udelay(1); + } + if (i == FEC_RESET_DELAY) { + printf("FEC_RESET_DELAY timeout\n"); + } +} + +/* send command to phy using mii, wait for result */ +uint mii_send(uint mii_cmd) +{ + struct fec_info_s *info; + struct eth_device *dev; + volatile fec_t *ep; + uint mii_reply; + int j = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + ep = (fec_t *) info->miibase; + + ep->mmfr = mii_cmd; /* command to phy */ + + /* wait for mii complete */ + while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { + udelay(1); + j++; + } + if (j >= MCFFEC_TOUT_LOOP) { + printf("MII not complete\n"); + return -1; + } + + mii_reply = ep->mmfr; /* result from phy */ + ep->eir = FEC_EIR_MII; /* clear MII complete */ +#ifdef ET_DEBUG + printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", + __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); +#endif + + return (mii_reply & 0xffff); /* data read from phy */ +} +#endif /* CFG_DISCOVER_PHY || (CONFIG_MII) */ + +#if defined(CFG_DISCOVER_PHY) +int mii_discover_phy(struct eth_device *dev) +{ +#define MAX_PHY_PASSES 11 + struct fec_info_s *info = dev->priv; + int phyaddr, pass; + uint phyno, phytype; + + if (info->phyname_init) + return info->phy_addr; + + phyaddr = -1; /* didn't find a PHY yet */ + for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { + if (pass > 1) { + /* PHY may need more time to recover from reset. + * The LXT970 needs 50ms typical, no maximum is + * specified, so wait 10ms before try again. + * With 11 passes this gives it 100ms to wake up. + */ + udelay(10000); /* wait 10ms */ + } + + for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { + + phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); +#ifdef ET_DEBUG + printf("PHY type 0x%x pass %d type\n", phytype, pass); +#endif + if (phytype != 0xffff) { + phyaddr = phyno; + phytype <<= 16; + phytype |= + mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); + + switch (phytype & 0xffffffff) { + case PHY_ID_KS8721BL: + strcpy(info->phy_name, + STR_ID_KS8721BL); + info->phyname_init = 1; + break; + default: + strcpy(info->phy_name, "unknown"); + info->phyname_init = 1; + break; + } + +#ifdef ET_DEBUG + printf("PHY @ 0x%x pass %d type ", phyno, pass); + switch (phytype & 0xffffffff) { + case PHY_ID_KS8721BL: + printf(STR_ID_KS8721BL); + break; + default: + printf("0x%08x\n", phytype); + break; + } +#endif + } + } + } + if (phyaddr < 0) + printf("No PHY device found.\n"); + + return phyaddr; +} +#endif /* CFG_DISCOVER_PHY */ + +int mii_init(void) __attribute__((weak,alias("__mii_init"))); + +void __mii_init(void) +{ + volatile fec_t *fecp; + struct fec_info_s *info; + struct eth_device *dev; + int miispd = 0, i = 0; + u16 autoneg = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + fecp = (fec_t *) info->miibase; + + fecpin_setclear(dev, 1); + + mii_reset(info); + + /* We use strictly polling mode only */ + fecp->eimr = 0; + + /* Clear any pending interrupt */ + fecp->eir = 0xffffffff; + + /* Set MII speed */ + miispd = (gd->bus_clk / 1000000) / 5; + fecp->mscr = miispd << 1; + + info->phy_addr = mii_discover_phy(dev); + +#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) + while (i < MCFFEC_TOUT_LOOP) { + autoneg = 0; + miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); + i++; + + if ((autoneg & AUTONEGLINK) == AUTONEGLINK) + break; + + udelay(500); + } + if (i >= MCFFEC_TOUT_LOOP) { + printf("Auto Negotiation not complete\n"); + } + + /* adapt to the half/full speed settings */ + info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; + info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); +} + +/***************************************************************************** + * Read and write a MII PHY register, routines used by MII Utilities + * + * FIXME: These routines are expected to return 0 on success, but mii_send + * does _not_ return an error code. Maybe 0xFFFF means error, i.e. + * no PHY connected... + * For now always return 0. + * FIXME: These routines only work after calling eth_init() at least once! + * Otherwise they hang in mii_send() !!! Sorry! + *****************************************************************************/ + +int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, + unsigned short *value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); +#endif + rdreg = mii_send(mk_mii_read(addr, reg)); + + *value = rdreg; + +#ifdef MII_DEBUG + printf("0x%04x\n", *value); +#endif + + return 0; +} + +int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, + unsigned short value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); +#endif + + rdreg = mii_send(mk_mii_write(addr, reg, value)); + +#ifdef MII_DEBUG + printf("0x%04x\n", value); +#endif + + return 0; +} + +#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m5235evb/u-boot.16 b/board/freescale/m5235evb/u-boot.16 new file mode 100644 index 00000000000..8ffd32607a9 --- /dev/null +++ b/board/freescale/m5235evb/u-boot.16 @@ -0,0 +1,145 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mcf523x/start.o (.text) + cpu/mcf523x/cpu_init.o (.text) + lib_m68k/traps.o (.text) + lib_m68k/interrupts.o (.text) + common/dlmalloc.o (.text) + lib_generic/zlib.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + __got_start = .; + *(.got) + __got_end = .; + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + _sbss = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/freescale/m5235evb/u-boot.32 b/board/freescale/m5235evb/u-boot.32 new file mode 100644 index 00000000000..9b72f66c688 --- /dev/null +++ b/board/freescale/m5235evb/u-boot.32 @@ -0,0 +1,153 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mcf523x/start.o (.text) + cpu/mcf523x/cpu.o (.text) + cpu/mcf523x/cpu_init.o (.text) + cpu/mcf523x/interrupts.o (.text) + cpu/mcf523x/speed.o (.text) + lib_m68k/libm68k.a (.text) + common/dlmalloc.o (.text) + common/cmd_bootm.o (.text) + common/cmd_flash.o (.text) + common/cmd_elf.o (.text) + common/cmd_mem.o (.text) + common/console.o (.text) + common/main.o (.text) + lib_generic/libgeneric.a (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + __got_start = .; + *(.got) + __got_end = .; + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + _sbss = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/freescale/m5235evb/u-boot.lds b/board/freescale/m5235evb/u-boot.lds new file mode 100644 index 00000000000..8ffd32607a9 --- /dev/null +++ b/board/freescale/m5235evb/u-boot.lds @@ -0,0 +1,145 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mcf523x/start.o (.text) + cpu/mcf523x/cpu_init.o (.text) + lib_m68k/traps.o (.text) + lib_m68k/interrupts.o (.text) + common/dlmalloc.o (.text) + lib_generic/zlib.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + __got_start = .; + *(.got) + __got_end = .; + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + _sbss = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + _end = . ; + PROVIDE (end = .); +} diff --git a/cpu/mcf523x/Makefile b/cpu/mcf523x/Makefile new file mode 100644 index 00000000000..d0e9b4550f1 --- /dev/null +++ b/cpu/mcf523x/Makefile @@ -0,0 +1,48 @@ +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +# CFLAGS += -DET_DEBUG + +LIB = lib$(CPU).a + +START = start.o +COBJS = cpu.o speed.o cpu_init.o interrupts.o + +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/cpu/mcf523x/config.mk b/cpu/mcf523x/config.mk new file mode 100644 index 00000000000..ba324a894a5 --- /dev/null +++ b/cpu/mcf523x/config.mk @@ -0,0 +1,27 @@ +# +# (C) Copyright 2003 Josef Baumgartner +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +PLATFORM_RELFLAGS += -ffixed-d7 -msep-data +PLATFORM_CPPFLAGS += -m5307 -fPIC diff --git a/cpu/mcf523x/cpu.c b/cpu/mcf523x/cpu.c new file mode 100644 index 00000000000..f0d954b3fbd --- /dev/null +++ b/cpu/mcf523x/cpu.c @@ -0,0 +1,109 @@ +/* + * + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include + +DECLARE_GLOBAL_DATA_PTR; + +int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[]) +{ + volatile ccm_t *ccm = (ccm_t *) MMAP_CCM; + + ccm->rcr = CCM_RCR_SOFTRST; + /* we don't return! */ + return 0; +}; + +int checkcpu(void) +{ + volatile ccm_t *ccm = (ccm_t *) MMAP_CCM; + u16 msk; + u16 id = 0; + u8 ver; + + puts("CPU: "); + msk = (ccm->cir >> 6); + ver = (ccm->cir & 0x003f); + switch (msk) { + case 0x31: + id = 5235; + break; + } + + if (id) { + printf("Freescale MCF%d (Mask:%01x Version:%x)\n", id, msk, + ver); + printf(" CPU CLK %d Mhz BUS CLK %d Mhz\n", + (int)(gd->cpu_clk / 1000000), + (int)(gd->bus_clk / 1000000)); + } + + return 0; +}; + +#if defined(CONFIG_WATCHDOG) +/* Called by macro WATCHDOG_RESET */ +void watchdog_reset(void) +{ + volatile wdog_t *wdp = (wdog_t *) (MMAP_WDOG); + + wdp->sr = 0x5555; /* Count register */ + asm("nop"); + wdp->sr = 0xAAAA; /* Count register */ +} + +int watchdog_disable(void) +{ + volatile wdog_t *wdp = (wdog_t *) (MMAP_WDOG); + + /* UserManual, once the wdog is disabled, wdog cannot be re-enabled */ + wdp->cr |= WTM_WCR_HALTED; /* halted watchdog timer */ + + puts("WATCHDOG:disabled\n"); + return (0); +} + +int watchdog_init(void) +{ + volatile wdog_t *wdp = (wdog_t *) (MMAP_WDOG); + u32 wdog_module = 0; + + /* set timeout and enable watchdog */ + wdog_module = ((CFG_CLK / CFG_HZ) * CONFIG_WATCHDOG_TIMEOUT); + wdog_module |= (wdog_module / 8192); + wdp->mr = wdog_module; + + wdp->cr = WTM_WCR_EN; + puts("WATCHDOG:enabled\n"); + + return (0); +} +#endif /* CONFIG_WATCHDOG */ diff --git a/cpu/mcf523x/cpu_init.c b/cpu/mcf523x/cpu_init.c new file mode 100644 index 00000000000..a31054d9ad3 --- /dev/null +++ b/cpu/mcf523x/cpu_init.c @@ -0,0 +1,145 @@ +/* + * + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#include + +/* + * Breath some life into the CPU... + * + * Set up the memory map, + * initialize a bunch of registers, + * initialize the UPM's + */ +void cpu_init_f(void) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; + volatile wdog_t *wdog = (wdog_t *) MMAP_WDOG; + volatile scm_t *scm = (scm_t *) MMAP_SCM; + + /* watchdog is enabled by default - disable the watchdog */ +#ifndef CONFIG_WATCHDOG + wdog->cr = 0; +#endif + + scm->rambar = (CFG_INIT_RAM_ADDR | SCM_RAMBAR_BDE); + + /* Port configuration */ + gpio->par_cs = 0; + +#if (defined(CFG_CS0_BASE) && defined(CFG_CS0_MASK) && defined(CFG_CS0_CTRL)) + fbcs->csar0 = CFG_CS0_BASE; + fbcs->cscr0 = CFG_CS0_CTRL; + fbcs->csmr0 = CFG_CS0_MASK; +#endif + +#if (defined(CFG_CS1_BASE) && defined(CFG_CS1_MASK) && defined(CFG_CS1_CTRL)) + gpio->par_cs |= GPIO_PAR_CS_CS1; + fbcs->csar1 = CFG_CS1_BASE; + fbcs->cscr1 = CFG_CS1_CTRL; + fbcs->csmr1 = CFG_CS1_MASK; +#endif + +#if (defined(CFG_CS2_BASE) && defined(CFG_CS2_MASK) && defined(CFG_CS2_CTRL)) + gpio->par_cs |= GPIO_PAR_CS_CS2; + fbcs->csar2 = CFG_CS2_BASE; + fbcs->cscr2 = CFG_CS2_CTRL; + fbcs->csmr2 = CFG_CS2_MASK; +#endif + +#if (defined(CFG_CS3_BASE) && defined(CFG_CS3_MASK) && defined(CFG_CS3_CTRL)) + gpio->par_cs |= GPIO_PAR_CS_CS3; + fbcs->csar3 = CFG_CS3_BASE; + fbcs->cscr3 = CFG_CS3_CTRL; + fbcs->csmr3 = CFG_CS3_MASK; +#endif + +#if (defined(CFG_CS4_BASE) && defined(CFG_CS4_MASK) && defined(CFG_CS4_CTRL)) + gpio->par_cs |= GPIO_PAR_CS_CS4; + fbcs->csar4 = CFG_CS4_BASE; + fbcs->cscr4 = CFG_CS4_CTRL; + fbcs->csmr4 = CFG_CS4_MASK; +#endif + +#if (defined(CFG_CS5_BASE) && defined(CFG_CS5_MASK) && defined(CFG_CS5_CTRL)) + gpio->par_cs |= GPIO_PAR_CS_CS5; + fbcs->csar5 = CFG_CS5_BASE; + fbcs->cscr5 = CFG_CS5_CTRL; + fbcs->csmr5 = CFG_CS5_MASK; +#endif + +#if (defined(CFG_CS6_BASE) && defined(CFG_CS6_MASK) && defined(CFG_CS6_CTRL)) + gpio->par_cs |= GPIO_PAR_CS_CS6; + fbcs->csar6 = CFG_CS6_BASE; + fbcs->cscr6 = CFG_CS6_CTRL; + fbcs->csmr6 = CFG_CS6_MASK; +#endif + +#if (defined(CFG_CS7_BASE) && defined(CFG_CS7_MASK) && defined(CFG_CS7_CTRL)) + gpio->par_cs |= GPIO_PAR_CS_CS7; + fbcs->csar7 = CFG_CS7_BASE; + fbcs->cscr7 = CFG_CS7_CTRL; + fbcs->csmr7 = CFG_CS7_MASK; +#endif + +#ifdef CONFIG_FSL_I2C + gpio->par_feci2c &= ~(GPIO_PAR_FECI2C_SCL_MASK | GPIO_PAR_FECI2C_SDA_MASK); + gpio->par_feci2c |= (GPIO_PAR_FECI2C_SCL_I2CSCL | GPIO_PAR_FECI2C_SDA_I2CSDA); +#endif + + icache_enable(); +} + +/* + * initialize higher level parts of CPU like timers + */ +int cpu_init_r(void) +{ + return (0); +} + +void uart_port_conf(void) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + /* Setup Ports: */ + switch (CFG_UART_PORT) { + case 0: + gpio->par_uart = (GPIO_PAR_UART_U0RXD | GPIO_PAR_UART_U0TXD); + break; + case 1: + gpio->par_uart = + (GPIO_PAR_UART_U1RXD_U1RXD | GPIO_PAR_UART_U1TXD_U1TXD); + break; + case 2: + gpio->par_timer = (GPIO_PAR_UART_U2RXD | GPIO_PAR_UART_U2TXD); + break; + } +} diff --git a/cpu/mcf523x/interrupts.c b/cpu/mcf523x/interrupts.c new file mode 100644 index 00000000000..125c53b1bcd --- /dev/null +++ b/cpu/mcf523x/interrupts.c @@ -0,0 +1,49 @@ +/* + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* CPU specific interrupt routine */ +#include +#include + +int interrupt_init(void) +{ + volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE); + + /* Make sure all interrupts are disabled */ + intp->imrl0 |= 0x1; + + enable_interrupts(); + return 0; +} + +#if defined(CONFIG_MCFTMR) +void dtimer_intr_setup(void) +{ + volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE); + + intp->icr0[CFG_TMRINTR_NO] = CFG_TMRINTR_PRI; + intp->imrl0 &= ~INTC_IPRL_INT0; + intp->imrl0 &= ~CFG_TMRINTR_MASK; +} +#endif diff --git a/cpu/mcf523x/speed.c b/cpu/mcf523x/speed.c new file mode 100644 index 00000000000..509109d0ed0 --- /dev/null +++ b/cpu/mcf523x/speed.c @@ -0,0 +1,48 @@ +/* + * + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#include + +DECLARE_GLOBAL_DATA_PTR; +/* + * get_clocks() fills in gd->cpu_clock and gd->bus_clk + */ +int get_clocks(void) +{ + volatile pll_t *pll = (volatile pll_t *)(MMAP_PLL); + + pll->syncr = PLL_SYNCR_MFD(1); + + while (!(pll->synsr & PLL_SYNSR_LOCK)); + + gd->bus_clk = CFG_CLK; + gd->cpu_clk = (gd->bus_clk * 2); + return (0); +} diff --git a/cpu/mcf523x/start.S b/cpu/mcf523x/start.S new file mode 100644 index 00000000000..2bd603db669 --- /dev/null +++ b/cpu/mcf523x/start.S @@ -0,0 +1,340 @@ +/* + * Copyright (C) 2003 Josef Baumgartner + * Based on code from Bernhard Kuhn + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include "version.h" + +#ifndef CONFIG_IDENT_STRING +#define CONFIG_IDENT_STRING "" +#endif + +#define _START _start +#define _FAULT _fault + +#define SAVE_ALL \ + move.w #0x2700,%sr; /* disable intrs */ \ + subl #60,%sp; /* space for 15 regs */ \ + moveml %d0-%d7/%a0-%a6,%sp@; + +#define RESTORE_ALL \ + moveml %sp@,%d0-%d7/%a0-%a6; \ + addl #60,%sp; /* space for 15 regs */ \ + rte; + +.text +/* + * Vector table. This is used for initial platform startup. + * These vectors are to catch any un-intended traps. + */ +_vectors: + +INITSP: .long 0x00000000 /* Initial SP */ +INITPC: .long _START /* Initial PC */ +vector02: .long _FAULT /* Access Error */ +vector03: .long _FAULT /* Address Error */ +vector04: .long _FAULT /* Illegal Instruction */ +vector05: .long _FAULT /* Reserved */ +vector06: .long _FAULT /* Reserved */ +vector07: .long _FAULT /* Reserved */ +vector08: .long _FAULT /* Privilege Violation */ +vector09: .long _FAULT /* Trace */ +vector0A: .long _FAULT /* Unimplemented A-Line */ +vector0B: .long _FAULT /* Unimplemented F-Line */ +vector0C: .long _FAULT /* Debug Interrupt */ +vector0D: .long _FAULT /* Reserved */ +vector0E: .long _FAULT /* Format Error */ +vector0F: .long _FAULT /* Unitialized Int. */ + +/* Reserved */ +vector10_17: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +vector18: .long _FAULT /* Spurious Interrupt */ +vector19: .long _FAULT /* Autovector Level 1 */ +vector1A: .long _FAULT /* Autovector Level 2 */ +vector1B: .long _FAULT /* Autovector Level 3 */ +vector1C: .long _FAULT /* Autovector Level 4 */ +vector1D: .long _FAULT /* Autovector Level 5 */ +vector1E: .long _FAULT /* Autovector Level 6 */ +vector1F: .long _FAULT /* Autovector Level 7 */ + +/* TRAP #0 - #15 */ +vector20_2F: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +/* Reserved */ +vector30_3F: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +vector64_127: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +vector128_191: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +vector192_255: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + + .text + + .globl _start +_start: + nop + nop + move.w #0x2700,%sr /* Mask off Interrupt */ + + /* Set vector base register at the beginning of the Flash */ + move.l #CFG_FLASH_BASE, %d0 + movec %d0, %VBR + + move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_RAM_CTRL), %d0 + movec %d0, %RAMBAR1 + + /* invalidate and disable cache */ + move.l #0x01000000, %d0 /* Invalidate cache cmd */ + movec %d0, %CACR /* Invalidate cache */ + nop + move.l #0, %d0 + movec %d0, %ACR0 + movec %d0, %ACR1 + + /* initialize general use internal ram */ + move.l #0, %d0 + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1 + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a2 + move.l %d0, (%a1) + move.l %d0, (%a2) + + /* set stackpointer to end of internal ram to get some stackspace for the + first c-code */ + move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET), %sp + clr.l %sp@- + + move.l #__got_start, %a5 /* put relocation table address to a5 */ + + bsr cpu_init_f /* run low-level CPU init code (from flash) */ + bsr board_init_f /* run low-level board init code (from flash) */ + + /* board_init_f() does not return */ + +/*------------------------------------------------------------------------------*/ + +/* + * void relocate_code (addr_sp, gd, addr_moni) + * + * This "function" does not return, instead it continues in RAM + * after relocating the monitor code. + * + * r3 = dest + * r4 = src + * r5 = length in bytes + * r6 = cachelinesize + */ + .globl relocate_code +relocate_code: + link.w %a6,#0 + move.l 8(%a6), %sp /* set new stack pointer */ + + move.l 12(%a6), %d0 /* Save copy of Global Data pointer */ + move.l 16(%a6), %a0 /* Save copy of Destination Address */ + + move.l #CFG_MONITOR_BASE, %a1 + move.l #__init_end, %a2 + move.l %a0, %a3 + + /* copy the code to RAM */ +1: + move.l (%a1)+, (%a3)+ + cmp.l %a1,%a2 + bgt.s 1b + +/* + * We are done. Do not return, instead branch to second part of board + * initialization, now running from RAM. + */ + move.l %a0, %a1 + add.l #(in_ram - CFG_MONITOR_BASE), %a1 + jmp (%a1) + +in_ram: + +clear_bss: + /* + * Now clear BSS segment + */ + move.l %a0, %a1 + add.l #(_sbss - CFG_MONITOR_BASE),%a1 + move.l %a0, %d1 + add.l #(_ebss - CFG_MONITOR_BASE),%d1 +6: + clr.l (%a1)+ + cmp.l %a1,%d1 + bgt.s 6b + + /* + * fix got table in RAM + */ + move.l %a0, %a1 + add.l #(__got_start - CFG_MONITOR_BASE),%a1 + move.l %a1,%a5 /* * fix got pointer register a5 */ + + move.l %a0, %a2 + add.l #(__got_end - CFG_MONITOR_BASE),%a2 + +7: + move.l (%a1),%d1 + sub.l #_start,%d1 + add.l %a0,%d1 + move.l %d1,(%a1)+ + cmp.l %a2, %a1 + bne 7b + + /* calculate relative jump to board_init_r in ram */ + move.l %a0, %a1 + add.l #(board_init_r - CFG_MONITOR_BASE), %a1 + + /* set parameters for board_init_r */ + move.l %a0,-(%sp) /* dest_addr */ + move.l %d0,-(%sp) /* gd */ + jsr (%a1) + +/*------------------------------------------------------------------------------*/ +/* exception code */ + .globl _fault +_fault: + jmp _fault + .globl _exc_handler + +_exc_handler: + SAVE_ALL + movel %sp,%sp@- + bsr exc_handler + addql #4,%sp + RESTORE_ALL + + .globl _int_handler +_int_handler: + SAVE_ALL + movel %sp,%sp@- + bsr int_handler + addql #4,%sp + RESTORE_ALL + +/*------------------------------------------------------------------------------*/ +/* cache functions */ + .globl icache_enable +icache_enable: + move.l #0x01000000, %d0 /* Invalidate cache cmd */ + movec %d0, %CACR /* Invalidate cache */ + nop + move.l #(CFG_SDRAM_BASE + 0xc000), %d0 /* Setup cache mask */ + movec %d0, %ACR0 /* Enable cache */ + move.l #(CFG_FLASH_BASE + 0xc000), %d0 /* Setup cache mask */ + movec %d0, %ACR1 /* Enable cache */ + + move.l #0x80400100, %d0 /* Setup cache mask */ + movec %d0, %CACR /* Enable cache */ + nop + + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1 + moveq #1, %d0 + move.l %d0, (%a1) + rts + + .globl icache_disable +icache_disable: + move.l #0x00000100, %d0 /* Setup cache mask */ + movec %d0, %CACR /* Disable cache */ + clr.l %d0 /* Setup cache mask */ + movec %d0, %ACR0 + movec %d0, %ACR1 + + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1 + moveq #0, %d0 + move.l %d0, (%a1) + rts + + .globl icache_status +icache_status: + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1 + move.l (%a1), %d0 + rts + + .globl icache_invalid +icache_invalid: + move.l #0x80600100, %d0 /* Setup cache mask */ + movec %d0, %CACR /* Enable cache */ + nop + rts + + .globl dcache_enable +dcache_enable: + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a1 + moveq #1, %d0 + move.l %d0, (%a1) + rts + + /* No dcache, just a dummy function */ + .globl dcache_disable +dcache_disable: + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a1 + moveq #0, %d0 + move.l %d0, (%a1) + rts + + .globl dcache_status +dcache_status: + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a1 + move.l (%a1), %d0 + rts + +/*------------------------------------------------------------------------------*/ + + .globl version_string +version_string: + .ascii U_BOOT_VERSION + .ascii " (", __DATE__, " - ", __TIME__, ")" + .ascii CONFIG_IDENT_STRING, "\0" diff --git a/include/asm-m68k/immap.h b/include/asm-m68k/immap.h index d66c1619b16..ffb9a377ba5 100644 --- a/include/asm-m68k/immap.h +++ b/include/asm-m68k/immap.h @@ -26,6 +26,35 @@ #ifndef __IMMAP_H #define __IMMAP_H +#ifdef CONFIG_M5235 +#include +#include + +#define CFG_FEC0_IOBASE (MMAP_FEC) +#define CFG_UART_BASE (MMAP_UART0 + (CFG_UART_PORT * 0x40)) + +/* Timer */ +#ifdef CONFIG_MCFTMR +#define CFG_UDELAY_BASE (MMAP_DTMR0) +#define CFG_TMR_BASE (MMAP_DTMR3) +#define CFG_TMRPND_REG (((volatile int0_t *)(CFG_INTR_BASE))->iprl0) +#define CFG_TMRINTR_NO (INT0_LO_DTMR3) +#define CFG_TMRINTR_MASK (INTC_IPRL_INT22) +#define CFG_TMRINTR_PEND (CFG_TMRINTR_MASK) +#define CFG_TMRINTR_PRI (0x1E) /* Level must include inorder to work */ +#define CFG_TIMER_PRESCALER (((gd->bus_clk / 1000000) - 1) << 8) +#endif + +#ifdef CONFIG_MCFPIT +#define CFG_UDELAY_BASE (MMAP_PIT0) +#define CFG_PIT_BASE (MMAP_PIT1) +#define CFG_PIT_PRESCALE (6) +#endif + +#define CFG_INTR_BASE (MMAP_INTC0) +#define CFG_NUM_IRQS (128) +#endif /* CONFIG_M5235 */ + #ifdef CONFIG_M5249 #include #include diff --git a/include/asm-m68k/immap_5235.h b/include/asm-m68k/immap_5235.h new file mode 100644 index 00000000000..4a034501d3b --- /dev/null +++ b/include/asm-m68k/immap_5235.h @@ -0,0 +1,378 @@ +/* + * MCF5329 Internal Memory Map + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __IMMAP_5235__ +#define __IMMAP_5235__ + +#define MMAP_SCM (CFG_MBAR + 0x00000000) +#define MMAP_SDRAM (CFG_MBAR + 0x00000040) +#define MMAP_FBCS (CFG_MBAR + 0x00000080) +#define MMAP_DMA0 (CFG_MBAR + 0x00000100) +#define MMAP_DMA1 (CFG_MBAR + 0x00000110) +#define MMAP_DMA2 (CFG_MBAR + 0x00000120) +#define MMAP_DMA3 (CFG_MBAR + 0x00000130) +#define MMAP_UART0 (CFG_MBAR + 0x00000200) +#define MMAP_UART1 (CFG_MBAR + 0x00000240) +#define MMAP_UART2 (CFG_MBAR + 0x00000280) +#define MMAP_I2C (CFG_MBAR + 0x00000300) +#define MMAP_QSPI (CFG_MBAR + 0x00000340) +#define MMAP_DTMR0 (CFG_MBAR + 0x00000400) +#define MMAP_DTMR1 (CFG_MBAR + 0x00000440) +#define MMAP_DTMR2 (CFG_MBAR + 0x00000480) +#define MMAP_DTMR3 (CFG_MBAR + 0x000004C0) +#define MMAP_INTC0 (CFG_MBAR + 0x00000C00) +#define MMAP_INTC1 (CFG_MBAR + 0x00000D00) +#define MMAP_INTCACK (CFG_MBAR + 0x00000F00) +#define MMAP_FEC (CFG_MBAR + 0x00001000) +#define MMAP_FECFIFO (CFG_MBAR + 0x00001400) +#define MMAP_GPIO (CFG_MBAR + 0x00100000) +#define MMAP_CCM (CFG_MBAR + 0x00110000) +#define MMAP_PLL (CFG_MBAR + 0x00120000) +#define MMAP_EPORT (CFG_MBAR + 0x00130000) +#define MMAP_WDOG (CFG_MBAR + 0x00140000) +#define MMAP_PIT0 (CFG_MBAR + 0x00150000) +#define MMAP_PIT1 (CFG_MBAR + 0x00160000) +#define MMAP_PIT2 (CFG_MBAR + 0x00170000) +#define MMAP_PIT3 (CFG_MBAR + 0x00180000) +#define MMAP_MDHA (CFG_MBAR + 0x00190000) +#define MMAP_RNG (CFG_MBAR + 0x001A0000) +#define MMAP_SKHA (CFG_MBAR + 0x001B0000) +#define MMAP_CAN1 (CFG_MBAR + 0x001C0000) +#define MMAP_ETPU (CFG_MBAR + 0x001D0000) +#define MMAP_CAN2 (CFG_MBAR + 0x001F0000) + +/* System Control Module register */ +typedef struct scm_ctrl { + u32 ipsbar; /* 0x00 - MBAR */ + u32 res1; /* 0x04 */ + u32 rambar; /* 0x08 - RAMBAR */ + u32 res2; /* 0x0C */ + u8 crsr; /* 0x10 Core Reset Status Register */ + u8 cwcr; /* 0x11 Core Watchdog Control Register */ + u8 lpicr; /* 0x12 Low-Power Interrupt Control Register */ + u8 cwsr; /* 0x13 Core Watchdog Service Register */ + u32 dmareqc; /* 0x14 */ + u32 res3; /* 0x18 */ + u32 mpark; /* 0x1C */ + u8 mpr; /* 0x20 */ + u8 res4[3]; /* 0x21 - 0x23 */ + u8 pacr0; /* 0x24 */ + u8 pacr1; /* 0x25 */ + u8 pacr2; /* 0x26 */ + u8 pacr3; /* 0x27 */ + u8 pacr4; /* 0x28 */ + u32 res5; /* 0x29 */ + u8 pacr5; /* 0x2a */ + u8 pacr6; /* 0x2b */ + u8 pacr7; /* 0x2c */ + u32 res6; /* 0x2d */ + u8 pacr8; /* 0x2e */ + u32 res7; /* 0x2f */ + u8 gpacr; /* 0x30 */ + u8 res8[3]; /* 0x31 - 0x33 */ +} scm_t; + +/* SDRAM controller registers */ +typedef struct sdram_ctrl { + u16 dcr; /* 0x00 Control register */ + u16 res1[3]; /* 0x02 - 0x07 */ + u32 dacr0; /* 0x08 address and control register 0 */ + u32 dmr0; /* 0x0C mask register block 0 */ + u32 dacr1; /* 0x10 address and control register 1 */ + u32 dmr1; /* 0x14 mask register block 1 */ +} sdram_t; + +/* Flexbus module Chip select registers */ +typedef struct fbcs_ctrl { + u16 csar0; /* 0x00 Chip-Select Address Register 0 */ + u16 res0; + u32 csmr0; /* 0x04 Chip-Select Mask Register 0 */ + u16 res1; /* 0x08 */ + u16 cscr0; /* 0x0A Chip-Select Control Register 0 */ + + u16 csar1; /* 0x0C Chip-Select Address Register 1 */ + u16 res2; + u32 csmr1; /* 0x10 Chip-Select Mask Register 1 */ + u16 res3; /* 0x14 */ + u16 cscr1; /* 0x16 Chip-Select Control Register 1 */ + + u16 csar2; /* 0x18 Chip-Select Address Register 2 */ + u16 res4; + u32 csmr2; /* 0x1C Chip-Select Mask Register 2 */ + u16 res5; /* 0x20 */ + u16 cscr2; /* 0x22 Chip-Select Control Register 2 */ + + u16 csar3; /* 0x24 Chip-Select Address Register 3 */ + u16 res6; + u32 csmr3; /* 0x28 Chip-Select Mask Register 3 */ + u16 res7; /* 0x2C */ + u16 cscr3; /* 0x2E Chip-Select Control Register 3 */ + + u16 csar4; /* 0x30 Chip-Select Address Register 4 */ + u16 res8; + u32 csmr4; /* 0x34 Chip-Select Mask Register 4 */ + u16 res9; /* 0x38 */ + u16 cscr4; /* 0x3A Chip-Select Control Register 4 */ + + u16 csar5; /* 0x3C Chip-Select Address Register 5 */ + u16 res10; + u32 csmr5; /* 0x40 Chip-Select Mask Register 5 */ + u16 res11; /* 0x44 */ + u16 cscr5; /* 0x46 Chip-Select Control Register 5 */ + + u16 csar6; /* 0x48 Chip-Select Address Register 5 */ + u16 res12; + u32 csmr6; /* 0x4C Chip-Select Mask Register 5 */ + u16 res13; /* 0x50 */ + u16 cscr6; /* 0x52 Chip-Select Control Register 5 */ + + u16 csar7; /* 0x54 Chip-Select Address Register 5 */ + u16 res14; + u32 csmr7; /* 0x58 Chip-Select Mask Register 5 */ + u16 res15; /* 0x5C */ + u16 cscr7; /* 0x5E Chip-Select Control Register 5 */ +} fbcs_t; + +/* QSPI module registers */ +typedef struct qspi_ctrl { + u16 qmr; /* Mode register */ + u16 res1; + u16 qdlyr; /* Delay register */ + u16 res2; + u16 qwr; /* Wrap register */ + u16 res3; + u16 qir; /* Interrupt register */ + u16 res4; + u16 qar; /* Address register */ + u16 res5; + u16 qdr; /* Data register */ + u16 res6; +} qspi_t; + +/* Interrupt module registers */ +typedef struct int0_ctrl { + /* Interrupt Controller 0 */ + u32 iprh0; /* 0x00 Pending Register High */ + u32 iprl0; /* 0x04 Pending Register Low */ + u32 imrh0; /* 0x08 Mask Register High */ + u32 imrl0; /* 0x0C Mask Register Low */ + u32 frch0; /* 0x10 Force Register High */ + u32 frcl0; /* 0x14 Force Register Low */ + u8 irlr; /* 0x18 */ + u8 iacklpr; /* 0x19 */ + u16 res1[19]; /* 0x1a - 0x3c */ + u8 icr0[64]; /* 0x40 - 0x7F Control registers */ + u32 res3[24]; /* 0x80 - 0xDF */ + u8 swiack0; /* 0xE0 Software Interrupt Acknowledge */ + u8 res4[3]; /* 0xE1 - 0xE3 */ + u8 Lniack0_1; /* 0xE4 Level n interrupt acknowledge resister */ + u8 res5[3]; /* 0xE5 - 0xE7 */ + u8 Lniack0_2; /* 0xE8 Level n interrupt acknowledge resister */ + u8 res6[3]; /* 0xE9 - 0xEB */ + u8 Lniack0_3; /* 0xEC Level n interrupt acknowledge resister */ + u8 res7[3]; /* 0xED - 0xEF */ + u8 Lniack0_4; /* 0xF0 Level n interrupt acknowledge resister */ + u8 res8[3]; /* 0xF1 - 0xF3 */ + u8 Lniack0_5; /* 0xF4 Level n interrupt acknowledge resister */ + u8 res9[3]; /* 0xF5 - 0xF7 */ + u8 Lniack0_6; /* 0xF8 Level n interrupt acknowledge resister */ + u8 resa[3]; /* 0xF9 - 0xFB */ + u8 Lniack0_7; /* 0xFC Level n interrupt acknowledge resister */ + u8 resb[3]; /* 0xFD - 0xFF */ +} int0_t; + +typedef struct int1_ctrl { + /* Interrupt Controller 1 */ + u32 iprh1; /* 0x00 Pending Register High */ + u32 iprl1; /* 0x04 Pending Register Low */ + u32 imrh1; /* 0x08 Mask Register High */ + u32 imrl1; /* 0x0C Mask Register Low */ + u32 frch1; /* 0x10 Force Register High */ + u32 frcl1; /* 0x14 Force Register Low */ + u8 irlr; /* 0x18 */ + u8 iacklpr; /* 0x19 */ + u16 res1[19]; /* 0x1a - 0x3c */ + u8 icr1[64]; /* 0x40 - 0x7F */ + u32 res4[24]; /* 0x80 - 0xDF */ + u8 swiack1; /* 0xE0 Software Interrupt Acknowledge */ + u8 res5[3]; /* 0xE1 - 0xE3 */ + u8 Lniack1_1; /* 0xE4 Level n interrupt acknowledge resister */ + u8 res6[3]; /* 0xE5 - 0xE7 */ + u8 Lniack1_2; /* 0xE8 Level n interrupt acknowledge resister */ + u8 res7[3]; /* 0xE9 - 0xEB */ + u8 Lniack1_3; /* 0xEC Level n interrupt acknowledge resister */ + u8 res8[3]; /* 0xED - 0xEF */ + u8 Lniack1_4; /* 0xF0 Level n interrupt acknowledge resister */ + u8 res9[3]; /* 0xF1 - 0xF3 */ + u8 Lniack1_5; /* 0xF4 Level n interrupt acknowledge resister */ + u8 resa[3]; /* 0xF5 - 0xF7 */ + u8 Lniack1_6; /* 0xF8 Level n interrupt acknowledge resister */ + u8 resb[3]; /* 0xF9 - 0xFB */ + u8 Lniack1_7; /* 0xFC Level n interrupt acknowledge resister */ + u8 resc[3]; /* 0xFD - 0xFF */ +} int1_t; + +typedef struct intgack_ctrl1 { + /* Global IACK Registers */ + u8 swiack; /* 0xE0 Global Software Interrupt Acknowledge */ + u8 Lniack[7]; /* 0xE1 - 0xE7 Global Level 0 Interrupt Acknowledge */ +} intgack_t; + +/* GPIO port registers */ +typedef struct gpio_ctrl { + /* Port Output Data Registers */ + u8 podr_addr; /* 0x00 */ + u8 podr_datah; /* 0x01 */ + u8 podr_datal; /* 0x02 */ + u8 podr_busctl; /* 0x03 */ + u8 podr_bs; /* 0x04 */ + u8 podr_cs; /* 0x05 */ + u8 podr_sdram; /* 0x06 */ + u8 podr_feci2c; /* 0x07 */ + u8 podr_uarth; /* 0x08 */ + u8 podr_uartl; /* 0x09 */ + u8 podr_qspi; /* 0x0A */ + u8 podr_timer; /* 0x0B */ + u8 podr_etpu; /* 0x0C */ + u8 res1[3]; /* 0x0D - 0x0F */ + + /* Port Data Direction Registers */ + u8 pddr_addr; /* 0x10 */ + u8 pddr_datah; /* 0x11 */ + u8 pddr_datal; /* 0x12 */ + u8 pddr_busctl; /* 0x13 */ + u8 pddr_bs; /* 0x14 */ + u8 pddr_cs; /* 0x15 */ + u8 pddr_sdram; /* 0x16 */ + u8 pddr_feci2c; /* 0x17 */ + u8 pddr_uarth; /* 0x18 */ + u8 pddr_uartl; /* 0x19 */ + u8 pddr_qspi; /* 0x1A */ + u8 pddr_timer; /* 0x1B */ + u8 pddr_etpu; /* 0x1C */ + u8 res2[3]; /* 0x1D - 0x1F */ + + /* Port Data Direction Registers */ + u8 ppdsdr_addr; /* 0x20 */ + u8 ppdsdr_datah; /* 0x21 */ + u8 ppdsdr_datal; /* 0x22 */ + u8 ppdsdr_busctl; /* 0x23 */ + u8 ppdsdr_bs; /* 0x24 */ + u8 ppdsdr_cs; /* 0x25 */ + u8 ppdsdr_sdram; /* 0x26 */ + u8 ppdsdr_feci2c; /* 0x27 */ + u8 ppdsdr_uarth; /* 0x28 */ + u8 ppdsdr_uartl; /* 0x29 */ + u8 ppdsdr_qspi; /* 0x2A */ + u8 ppdsdr_timer; /* 0x2B */ + u8 ppdsdr_etpu; /* 0x2C */ + u8 res3[3]; /* 0x2D - 0x2F */ + + /* Port Clear Output Data Registers */ + u8 pclrr_addr; /* 0x30 */ + u8 pclrr_datah; /* 0x31 */ + u8 pclrr_datal; /* 0x32 */ + u8 pclrr_busctl; /* 0x33 */ + u8 pclrr_bs; /* 0x34 */ + u8 pclrr_cs; /* 0x35 */ + u8 pclrr_sdram; /* 0x36 */ + u8 pclrr_feci2c; /* 0x37 */ + u8 pclrr_uarth; /* 0x38 */ + u8 pclrr_uartl; /* 0x39 */ + u8 pclrr_qspi; /* 0x3A */ + u8 pclrr_timer; /* 0x3B */ + u8 pclrr_etpu; /* 0x3C */ + u8 res4[3]; /* 0x3D - 0x3F */ + + /* Pin Assignment Registers */ + u8 par_ad; /* 0x40 */ + u8 res5; /* 0x41 */ + u16 par_busctl; /* 0x42 */ + u8 par_bs; /* 0x44 */ + u8 par_cs; /* 0x45 */ + u8 par_sdram; /* 0x46 */ + u8 par_feci2c; /* 0x47 */ + u16 par_uart; /* 0x48 */ + u8 par_qspi; /* 0x4A */ + u8 res6; /* 0x4B */ + u16 par_timer; /* 0x4C */ + u8 par_etpu; /* 0x4E */ + u8 res7; /* 0x4F */ + + /* Drive Strength Control Registers */ + u8 dscr_eim; /* 0x50 */ + u8 dscr_etpu; /* 0x51 */ + u8 dscr_feci2c; /* 0x52 */ + u8 dscr_uart; /* 0x53 */ + u8 dscr_qspi; /* 0x54 */ + u8 dscr_timer; /* 0x55 */ + u16 res8; /* 0x56 */ +} gpio_t; + +/*Chip configuration module registers */ +typedef struct ccm_ctrl { + u8 rcr; /* 0x01 */ + u8 rsr; /* 0x02 */ + u16 res1; /* 0x03 */ + u16 ccr; /* 0x04 Chip configuration register */ + u16 lpcr; /* 0x06 Low-power Control register */ + u16 rcon; /* 0x08 Rreset configuration register */ + u16 cir; /* 0x0a Chip identification register */ +} ccm_t; + +/* Clock Module registers */ +typedef struct pll_ctrl { + u32 syncr; /* 0x00 synthesizer control register */ + u32 synsr; /* 0x04 synthesizer status register */ +} pll_t; + +/* Watchdog registers */ +typedef struct wdog_ctrl { + u16 cr; /* 0x00 Control register */ + u16 mr; /* 0x02 Modulus register */ + u16 cntr; /* 0x04 Count register */ + u16 sr; /* 0x06 Service register */ +} wdog_t; + +/* FlexCan module registers */ +typedef struct can_ctrl { + u32 mcr; /* 0x00 Module Configuration register */ + u32 ctrl; /* 0x04 Control register */ + u32 timer; /* 0x08 Free Running Timer */ + u32 res1; /* 0x0C */ + u32 rxgmask; /* 0x10 Rx Global Mask */ + u32 rx14mask; /* 0x14 RxBuffer 14 Mask */ + u32 rx15mask; /* 0x18 RxBuffer 15 Mask */ + u32 errcnt; /* 0x1C Error Counter Register */ + u32 errstat; /* 0x20 Error and status Register */ + u32 res2; /* 0x24 */ + u32 imask; /* 0x28 Interrupt Mask Register */ + u32 res3; /* 0x2C */ + u32 iflag; /* 0x30 Interrupt Flag Register */ + u32 res4[19]; /* 0x34 - 0x7F */ + u32 MB0_15[2048]; /* 0x80 Message Buffer 0-15 */ +} can_t; + +#endif /* __IMMAP_5235__ */ diff --git a/include/asm-m68k/m5235.h b/include/asm-m68k/m5235.h new file mode 100644 index 00000000000..b98b452ca96 --- /dev/null +++ b/include/asm-m68k/m5235.h @@ -0,0 +1,905 @@ +/* + * mcf5329.h -- Definitions for Freescale Coldfire 5329 + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef mcf5235_h +#define mcf5235_h +/****************************************************************************/ + +/********************************************************************* +* System Control Module (SCM) +*********************************************************************/ + +/* Bit definition and macros for SCM_IPSBAR */ +#define SCM_IPSBAR_BA(x) (((x)&0x03)<<30) +#define SCM_IPSBAR_V (0x00000001) + +/* Bit definition and macros for SCM_RAMBAR */ +#define SCM_RAMBAR_BA(x) (((x)&0xFFFF)<<16) +#define SCM_RAMBAR_BDE (0x00000200) + +/* Bit definition and macros for SCM_CRSR */ +#define SCM_CRSR_EXT (0x80) + +/* Bit definitions and macros for SCM_CWCR */ +#define SCM_CWCR_CWE (0x80) +#define SCM_CWCR_CWRI (0x40) +#define SCM_CWCR_CWT(x) (((x)&0x07)<<3) +#define SCM_CWCR_CWTA (0x04) +#define SCM_CWCR_CWTAVAL (0x02) +#define SCM_CWCR_CWTIC (0x01) + +/* Bit definitions and macros for SCM_LPICR */ +#define SCM_LPICR_ENBSTOP (0x80) +#define SCM_LPICR_XLPM_IPL(x) (((x)&0x07)<<4) +#define SCM_LPICR_XLPM_IPL_ANY (0x00) +#define SCM_LPICR_XLPM_IPL_L2_7 (0x10) +#define SCM_LPICR_XLPM_IPL_L3_7 (0x20) +#define SCM_LPICR_XLPM_IPL_L4_7 (0x30) +#define SCM_LPICR_XLPM_IPL_L5_7 (0x40) +#define SCM_LPICR_XLPM_IPL_L6_7 (0x50) +#define SCM_LPICR_XLPM_IPL_L7 (0x70) + +/* Bit definitions and macros for SCM_DMAREQC */ +#define SCM_DMAREQC_EXT(x) (((x)&0x0F)<<16) +#define SCM_DMAREQC_EXT_ETPU (0x00080000) +#define SCM_DMAREQC_EXT_EXTDREQ2 (0x00040000) +#define SCM_DMAREQC_EXT_EXTDREQ1 (0x00020000) +#define SCM_DMAREQC_EXT_EXTDREQ0 (0x00010000) +#define SCM_DMAREQC_DMAC3(x) (((x)&0x0F)<<12) +#define SCM_DMAREQC_DMAC2(x) (((x)&0x0F)<<8) +#define SCM_DMAREQC_DMAC1(x) (((x)&0x0F)<<4) +#define SCM_DMAREQC_DMAC0(x) (((x)&0x0F)) +#define SCM_DMAREQC_DMACn_DTMR0 (0x04) +#define SCM_DMAREQC_DMACn_DTMR1 (0x05) +#define SCM_DMAREQC_DMACn_DTMR2 (0x06) +#define SCM_DMAREQC_DMACn_DTMR3 (0x07) +#define SCM_DMAREQC_DMACn_UART0RX (0x08) +#define SCM_DMAREQC_DMACn_UART1RX (0x09) +#define SCM_DMAREQC_DMACn_UART2RX (0x0A) +#define SCM_DMAREQC_DMACn_UART0TX (0x0C) +#define SCM_DMAREQC_DMACn_UART1TX (0x0D) +#define SCM_DMAREQC_DMACn_UART3TX (0x0E) + +/* Bit definitions and macros for SCM_MPARK */ +#define SCM_MPARK_M2_P_EN (0x02000000) +#define SCM_MPARK_M3_PRTY_MSK (0x00C00000) +#define SCM_MPARK_M3_PRTY_4TH (0x00000000) +#define SCM_MPARK_M3_PRTY_3RD (0x00400000) +#define SCM_MPARK_M3_PRTY_2ND (0x00800000) +#define SCM_MPARK_M3_PRTY_1ST (0x00C00000) +#define SCM_MPARK_M2_PRTY_MSK (0x00300000) +#define SCM_MPARK_M2_PRTY_4TH (0x00000000) +#define SCM_MPARK_M2_PRTY_3RD (0x00100000) +#define SCM_MPARK_M2_PRTY_2ND (0x00200000) +#define SCM_MPARK_M2_PRTY_1ST (0x00300000) +#define SCM_MPARK_M0_PRTY_MSK (0x000C0000) +#define SCM_MPARK_M0_PRTY_4TH (0x00000000) +#define SCM_MPARK_M0_PRTY_3RD (0x00040000) +#define SCM_MPARK_M0_PRTY_2ND (0x00080000) +#define SCM_MPARK_M0_PRTY_1ST (0x000C0000) +#define SCM_MPARK_FIXED (0x00004000) +#define SCM_MPARK_TIMEOUT (0x00002000) +#define SCM_MPARK_PRKLAST (0x00001000) +#define SCM_MPARK_LCKOUT_TIME(x) (((x)&0x0F)<<8) + +/* Bit definitions and macros for SCM_MPR */ +#define SCM_MPR_MPR3 (0x08) +#define SCM_MPR_MPR2 (0x04) +#define SCM_MPR_MPR1 (0x02) +#define SCM_MPR_MPR0 (0x01) + +/* Bit definitions and macros for SCM_PACRn */ +#define SCM_PACRn_LOCK1 (0x80) +#define SCM_PACRn_ACCESSCTRL1(x) (((x)&0x07)<<4) +#define SCM_PACRn_LOCK0 (0x08) +#define SCM_PACRn_ACCESSCTRL0(x) (((x)&0x07)) + +/* Bit definitions and macros for SCM_GPACR */ +#define SCM_PACRn_LOCK (0x80) +#define SCM_PACRn_ACCESSCTRL0(x) (((x)&0x07)) + +/********************************************************************* +* SDRAM Controller (SDRAMC) +*********************************************************************/ +/* Bit definitions and macros for SDRAMC_DCR */ +#define SDRAMC_DCR_NAM (0x2000) +#define SDRAMC_DCR_COC (0x1000) +#define SDRAMC_DCR_IS (0x0800) +#define SDRAMC_DCR_RTIM_MASK (0x0C00) +#define SDRAMC_DCR_RTIM_3CLKS (0x0000) +#define SDRAMC_DCR_RTIM_6CLKS (0x0200) +#define SDRAMC_DCR_RTIM_9CLKS (0x0400) +#define SDRAMC_DCR_RC(x) (((x)&0xFF)<<8) + +/* Bit definitions and macros for SDRAMC_DARCn */ +#define SDRAMC_DARCn_BA(x) (((x)&0xFFFC)<<18) +#define SDRAMC_DARCn_RE (0x00008000) +#define SDRAMC_DARCn_CASL_MASK (0x00003000) +#define SDRAMC_DARCn_CASL_C0 (0x00000000) +#define SDRAMC_DARCn_CASL_C1 (0x00001000) +#define SDRAMC_DARCn_CASL_C2 (0x00002000) +#define SDRAMC_DARCn_CASL_C3 (0x00003000) +#define SDRAMC_DARCn_CBM_MASK (0x00000700) +#define SDRAMC_DARCn_CBM_CMD17 (0x00000000) +#define SDRAMC_DARCn_CBM_CMD18 (0x00000100) +#define SDRAMC_DARCn_CBM_CMD19 (0x00000200) +#define SDRAMC_DARCn_CBM_CMD20 (0x00000300) +#define SDRAMC_DARCn_CBM_CMD21 (0x00000400) +#define SDRAMC_DARCn_CBM_CMD22 (0x00000500) +#define SDRAMC_DARCn_CBM_CMD23 (0x00000600) +#define SDRAMC_DARCn_CBM_CMD24 (0x00000700) +#define SDRAMC_DARCn_IMRS (0x00000040) +#define SDRAMC_DARCn_PS_MASK (0x00000030) +#define SDRAMC_DARCn_PS_32 (0x00000000) +#define SDRAMC_DARCn_PS_16 (0x00000010) +#define SDRAMC_DARCn_PS_8 (0x00000020) +#define SDRAMC_DARCn_IP (0x00000008) + +/* Bit definitions and macros for SDRAMC_DMRn */ +#define SDRAMC_DMRn_BAM(x) (((x)&0x3FFF)<<18) +#define SDRAMC_DMRn_WP (0x00000100) +#define SDRAMC_DMRn_V (0x00000001) + +/********************************************************************* +* FlexBus Chip Selects (FBCS) +*********************************************************************/ +/* Bit definitions and macros for FBCS_CSMR */ +#define FBCS_CSMR_BAM(x) (((x)&0xFFFF)<<16) +#define FBCS_CSMR_BAM_4G (0xFFFF0000) +#define FBCS_CSMR_BAM_2G (0x7FFF0000) +#define FBCS_CSMR_BAM_1G (0x3FFF0000) +#define FBCS_CSMR_BAM_1024M (0x3FFF0000) +#define FBCS_CSMR_BAM_512M (0x1FFF0000) +#define FBCS_CSMR_BAM_256M (0x0FFF0000) +#define FBCS_CSMR_BAM_128M (0x07FF0000) +#define FBCS_CSMR_BAM_64M (0x03FF0000) +#define FBCS_CSMR_BAM_32M (0x01FF0000) +#define FBCS_CSMR_BAM_16M (0x00FF0000) +#define FBCS_CSMR_BAM_8M (0x007F0000) +#define FBCS_CSMR_BAM_4M (0x003F0000) +#define FBCS_CSMR_BAM_2M (0x001F0000) +#define FBCS_CSMR_BAM_1M (0x000F0000) +#define FBCS_CSMR_BAM_1024K (0x000F0000) +#define FBCS_CSMR_BAM_512K (0x00070000) +#define FBCS_CSMR_BAM_256K (0x00030000) +#define FBCS_CSMR_BAM_128K (0x00010000) +#define FBCS_CSMR_BAM_64K (0x00000000) +#define FBCS_CSMR_WP (0x00000100) +#define FBCS_CSMR_V (0x00000001) + +/* Bit definitions and macros for FBCS_CSCR */ +#define FBCS_CSCR_SRWS(x) (((x)&0x03)<<14) +#define FBCS_CSCR_IWS(x) (((x)&0x0F)<<10) +#define FBCS_CSCR_AA (0x0100) +#define FBCS_CSCR_PS_MASK (0x00C0) +#define FBCS_CSCR_PS_32 (0x0000) +#define FBCS_CSCR_PS_16 (0x0080) +#define FBCS_CSCR_PS_8 (0x0040) +#define FBCS_CSCR_BEM (0x0020) +#define FBCS_CSCR_BSTR (0x0010) +#define FBCS_CSCR_BSTW (0x0008) +#define FBCS_CSCR_SWWS(x) ((x)&0x07) + +/********************************************************************* +* Queued Serial Peripheral Interface (QSPI) +*********************************************************************/ +/* Bit definitions and macros for QSPI_QMR */ +#define QSPI_QMR_MSTR (0x8000) +#define QSPI_QMR_DOHIE (0x4000) +#define QSPI_QMR_BITS(x) (((x)&0x000F)<<10) +#define QSPI_QMR_CPOL (0x0200) +#define QSPI_QMR_CPHA (0x0100) +#define QSPI_QMR_BAUD(x) ((x)&0x00FF) + +/* Bit definitions and macros for QSPI_QDLYR */ +#define QSPI_QDLYR_SPE (0x8000) +#define QSPI_QDLYR_QCD(x) (((x)&0x007F)<<8) +#define QSPI_QDLYR_DTL(x) ((x)&0x00FF) + +/* Bit definitions and macros for QSPI_QWR */ +#define QSPI_QWR_HALT (0x8000) +#define QSPI_QWR_WREN (0x4000) +#define QSPI_QWR_WRTO (0x2000) +#define QSPI_QWR_CSIV (0x1000) +#define QSPI_QWR_ENDQP(x) (((x)&0x000F)<<8) +#define QSPI_QWR_NEWQP(x) ((x)&0x000F) + +/* Bit definitions and macros for QSPI_QIR */ +#define QSPI_QIR_WCEFB (0x8000) +#define QSPI_QIR_ABRTB (0x4000) +#define QSPI_QIR_ABRTL (0x1000) +#define QSPI_QIR_WCEFE (0x0800) +#define QSPI_QIR_ABRTE (0x0400) +#define QSPI_QIR_SPIFE (0x0100) +#define QSPI_QIR_WCEF (0x0008) +#define QSPI_QIR_ABRT (0x0004) +#define QSPI_QIR_SPIF (0x0001) + +/* Bit definitions and macros for QSPI_QAR */ +#define QSPI_QAR_ADDR(x) ((x)&0x003F) + +/* Bit definitions and macros for QSPI_QDR */ +#define QSPI_QDR_CONT (0x8000) +#define QSPI_QDR_BITSE (0x4000) +#define QSPI_QDR_DT (0x2000) +#define QSPI_QDR_DSCK (0x1000) +#define QSPI_QDR_QSPI_CS3 (0x0800) +#define QSPI_QDR_QSPI_CS2 (0x0400) +#define QSPI_QDR_QSPI_CS1 (0x0200) +#define QSPI_QDR_QSPI_CS0 (0x0100) + +/********************************************************************* +* Interrupt Controller (INTC) +*********************************************************************/ +#define INT0_LO_RSVD0 (0) +#define INT0_LO_EPORT1 (1) +#define INT0_LO_EPORT2 (2) +#define INT0_LO_EPORT3 (3) +#define INT0_LO_EPORT4 (4) +#define INT0_LO_EPORT5 (5) +#define INT0_LO_EPORT6 (6) +#define INT0_LO_EPORT7 (7) +#define INT0_LO_SCM (8) +#define INT0_LO_DMA0 (9) +#define INT0_LO_DMA1 (10) +#define INT0_LO_DMA2 (11) +#define INT0_LO_DMA3 (12) +#define INT0_LO_UART0 (13) +#define INT0_LO_UART1 (14) +#define INT0_LO_UART2 (15) +#define INT0_LO_RSVD1 (16) +#define INT0_LO_I2C (17) +#define INT0_LO_QSPI (18) +#define INT0_LO_DTMR0 (19) +#define INT0_LO_DTMR1 (20) +#define INT0_LO_DTMR2 (21) +#define INT0_LO_DTMR3 (22) +#define INT0_LO_FEC_TXF (23) +#define INT0_LO_FEC_TXB (24) +#define INT0_LO_FEC_UN (25) +#define INT0_LO_FEC_RL (26) +#define INT0_LO_FEC_RXF (27) +#define INT0_LO_FEC_RXB (28) +#define INT0_LO_FEC_MII (29) +#define INT0_LO_FEC_LC (30) +#define INT0_LO_FEC_HBERR (31) +#define INT0_HI_FEC_GRA (32) +#define INT0_HI_FEC_EBERR (33) +#define INT0_HI_FEC_BABT (34) +#define INT0_HI_FEC_BABR (35) +#define INT0_HI_PIT0 (36) +#define INT0_HI_PIT1 (37) +#define INT0_HI_PIT2 (38) +#define INT0_HI_PIT3 (39) +#define INT0_HI_RNG (40) +#define INT0_HI_SKHA (41) +#define INT0_HI_MDHA (42) +#define INT0_HI_CAN1_BUF0I (43) +#define INT0_HI_CAN1_BUF1I (44) +#define INT0_HI_CAN1_BUF2I (45) +#define INT0_HI_CAN1_BUF3I (46) +#define INT0_HI_CAN1_BUF4I (47) +#define INT0_HI_CAN1_BUF5I (48) +#define INT0_HI_CAN1_BUF6I (49) +#define INT0_HI_CAN1_BUF7I (50) +#define INT0_HI_CAN1_BUF8I (51) +#define INT0_HI_CAN1_BUF9I (52) +#define INT0_HI_CAN1_BUF10I (53) +#define INT0_HI_CAN1_BUF11I (54) +#define INT0_HI_CAN1_BUF12I (55) +#define INT0_HI_CAN1_BUF13I (56) +#define INT0_HI_CAN1_BUF14I (57) +#define INT0_HI_CAN1_BUF15I (58) +#define INT0_HI_CAN1_ERRINT (59) +#define INT0_HI_CAN1_BOFFINT (60) +/* 60-63 Reserved */ + +/* 0 - 7 Reserved */ +#define INT1_LO_CAN1_BUF0I (8) +#define INT1_LO_CAN1_BUF1I (9) +#define INT1_LO_CAN1_BUF2I (10) +#define INT1_LO_CAN1_BUF3I (11) +#define INT1_LO_CAN1_BUF4I (12) +#define INT1_LO_CAN1_BUF5I (13) +#define INT1_LO_CAN1_BUF6I (14) +#define INT1_LO_CAN1_BUF7I (15) +#define INT1_LO_CAN1_BUF8I (16) +#define INT1_LO_CAN1_BUF9I (17) +#define INT1_LO_CAN1_BUF10I (18) +#define INT1_LO_CAN1_BUF11I (19) +#define INT1_LO_CAN1_BUF12I (20) +#define INT1_LO_CAN1_BUF13I (21) +#define INT1_LO_CAN1_BUF14I (22) +#define INT1_LO_CAN1_BUF15I (23) +#define INT1_LO_CAN1_ERRINT (24) +#define INT1_LO_CAN1_BOFFINT (25) +/* 26 Reserved */ +#define INT1_LO_ETPU_TC0F (27) +#define INT1_LO_ETPU_TC1F (28) +#define INT1_LO_ETPU_TC2F (29) +#define INT1_LO_ETPU_TC3F (30) +#define INT1_LO_ETPU_TC4F (31) +#define INT1_HI_ETPU_TC5F (32) +#define INT1_HI_ETPU_TC6F (33) +#define INT1_HI_ETPU_TC7F (34) +#define INT1_HI_ETPU_TC8F (35) +#define INT1_HI_ETPU_TC9F (36) +#define INT1_HI_ETPU_TC10F (37) +#define INT1_HI_ETPU_TC11F (38) +#define INT1_HI_ETPU_TC12F (39) +#define INT1_HI_ETPU_TC13F (40) +#define INT1_HI_ETPU_TC14F (41) +#define INT1_HI_ETPU_TC15F (42) +#define INT1_HI_ETPU_TC16F (43) +#define INT1_HI_ETPU_TC17F (44) +#define INT1_HI_ETPU_TC18F (45) +#define INT1_HI_ETPU_TC19F (46) +#define INT1_HI_ETPU_TC20F (47) +#define INT1_HI_ETPU_TC21F (48) +#define INT1_HI_ETPU_TC22F (49) +#define INT1_HI_ETPU_TC23F (50) +#define INT1_HI_ETPU_TC24F (51) +#define INT1_HI_ETPU_TC25F (52) +#define INT1_HI_ETPU_TC26F (53) +#define INT1_HI_ETPU_TC27F (54) +#define INT1_HI_ETPU_TC28F (55) +#define INT1_HI_ETPU_TC29F (56) +#define INT1_HI_ETPU_TC30F (57) +#define INT1_HI_ETPU_TC31F (58) +#define INT1_HI_ETPU_TGIF (59) + +/* Bit definitions and macros for INTC_IPRH */ +#define INTC_IPRH_INT63 (0x80000000) +#define INTC_IPRH_INT62 (0x40000000) +#define INTC_IPRH_INT61 (0x20000000) +#define INTC_IPRH_INT60 (0x10000000) +#define INTC_IPRH_INT59 (0x08000000) +#define INTC_IPRH_INT58 (0x04000000) +#define INTC_IPRH_INT57 (0x02000000) +#define INTC_IPRH_INT56 (0x01000000) +#define INTC_IPRH_INT55 (0x00800000) +#define INTC_IPRH_INT54 (0x00400000) +#define INTC_IPRH_INT53 (0x00200000) +#define INTC_IPRH_INT52 (0x00100000) +#define INTC_IPRH_INT51 (0x00080000) +#define INTC_IPRH_INT50 (0x00040000) +#define INTC_IPRH_INT49 (0x00020000) +#define INTC_IPRH_INT48 (0x00010000) +#define INTC_IPRH_INT47 (0x00008000) +#define INTC_IPRH_INT46 (0x00004000) +#define INTC_IPRH_INT45 (0x00002000) +#define INTC_IPRH_INT44 (0x00001000) +#define INTC_IPRH_INT43 (0x00000800) +#define INTC_IPRH_INT42 (0x00000400) +#define INTC_IPRH_INT41 (0x00000200) +#define INTC_IPRH_INT40 (0x00000100) +#define INTC_IPRH_INT39 (0x00000080) +#define INTC_IPRH_INT38 (0x00000040) +#define INTC_IPRH_INT37 (0x00000020) +#define INTC_IPRH_INT36 (0x00000010) +#define INTC_IPRH_INT35 (0x00000008) +#define INTC_IPRH_INT34 (0x00000004) +#define INTC_IPRH_INT33 (0x00000002) +#define INTC_IPRH_INT32 (0x00000001) + +/* Bit definitions and macros for INTC_IPRL */ +#define INTC_IPRL_INT31 (0x80000000) +#define INTC_IPRL_INT30 (0x40000000) +#define INTC_IPRL_INT29 (0x20000000) +#define INTC_IPRL_INT28 (0x10000000) +#define INTC_IPRL_INT27 (0x08000000) +#define INTC_IPRL_INT26 (0x04000000) +#define INTC_IPRL_INT25 (0x02000000) +#define INTC_IPRL_INT24 (0x01000000) +#define INTC_IPRL_INT23 (0x00800000) +#define INTC_IPRL_INT22 (0x00400000) +#define INTC_IPRL_INT21 (0x00200000) +#define INTC_IPRL_INT20 (0x00100000) +#define INTC_IPRL_INT19 (0x00080000) +#define INTC_IPRL_INT18 (0x00040000) +#define INTC_IPRL_INT17 (0x00020000) +#define INTC_IPRL_INT16 (0x00010000) +#define INTC_IPRL_INT15 (0x00008000) +#define INTC_IPRL_INT14 (0x00004000) +#define INTC_IPRL_INT13 (0x00002000) +#define INTC_IPRL_INT12 (0x00001000) +#define INTC_IPRL_INT11 (0x00000800) +#define INTC_IPRL_INT10 (0x00000400) +#define INTC_IPRL_INT9 (0x00000200) +#define INTC_IPRL_INT8 (0x00000100) +#define INTC_IPRL_INT7 (0x00000080) +#define INTC_IPRL_INT6 (0x00000040) +#define INTC_IPRL_INT5 (0x00000020) +#define INTC_IPRL_INT4 (0x00000010) +#define INTC_IPRL_INT3 (0x00000008) +#define INTC_IPRL_INT2 (0x00000004) +#define INTC_IPRL_INT1 (0x00000002) +#define INTC_IPRL_INT0 (0x00000001) + +/* Bit definitions and macros for INTC_IRLR */ +#define INTC_IRLRn(x) (((x)&0x7F)<<1) + +/* Bit definitions and macros for INTC_IACKLPRn */ +#define INTC_IACKLPRn_LEVEL(x) (((x)&0x07)<<4) +#define INTC_IACKLPRn_PRI(x) ((x)&0x0F) + +/* Bit definitions and macros for INTC_ICRnx */ +#define INTC_ICRnx_IL(x) (((x)&0x07)<<3) +#define INTC_ICRnx_IP(x) ((x)&0x07) + +/********************************************************************* +* General Purpose I/O (GPIO) +*********************************************************************/ +/* Bit definitions and macros for GPIO_PODR */ +#define GPIO_PODR_ADDR(x) (((x)&0x07)<<5) +#define GPIO_PODR_ADDR_MASK (0xE0) +#define GPIO_PODR_BS(x) ((x)&0x0F) +#define GPIO_PODR_BS_MASK (0x0F) +#define GPIO_PODR_CS(x) (((x)&0x7F)<<1) +#define GPIO_PODR_CS_MASK (0xFE) +#define GPIO_PODR_SDRAM(X) ((x)&0x3F) +#define GPIO_PODR_SDRAM_MASK (0x3F) +#define GPIO_PODR_FECI2C(x) GPIO_PODR_BS(x) +#define GPIO_PODR_FECI2C_MASK GPIO_PODR_BS_MASK +#define GPIO_PODR_UARTH(x) ((x)&0x03) +#define GPIO_PODR_UARTH_MASK (0x03) +#define GPIO_PODR_QSPI(x) ((x)&0x1F) +#define GPIO_PODR_QSPI_MASK (0x1F) +#define GPIO_PODR_ETPU(x) ((x)&0x07) +#define GPIO_PODR_ETPU_MASK (0x07) + +/* Bit definitions and macros for GPIO_PDDR */ +#define GPIO_PDDR_ADDR(x) GPIO_PODR_ADDR(x) +#define GPIO_PDDR_ADDR_MASK GPIO_PODR_ADDR_MASK +#define GPIO_PDDR_BS(x) GPIO_PODR_BS(x) +#define GPIO_PDDR_BS_MASK GPIO_PODR_BS_MASK +#define GPIO_PDDR_CS(x) GPIO_PODR_CS(x) +#define GPIO_PDDR_CS_MASK GPIO_PODR_CS_MASK +#define GPIO_PDDR_SDRAM(X) GPIO_PODR_SDRAM(X) +#define GPIO_PDDR_SDRAM_MASK GPIO_PODR_SDRAM_MASK +#define GPIO_PDDR_FECI2C(x) GPIO_PDDR_BS(x) +#define GPIO_PDDR_FECI2C_MASK GPIO_PDDR_BS_MASK +#define GPIO_PDDR_UARTH(x) GPIO_PODR_UARTH(x) +#define GPIO_PDDR_UARTH_MASK GPIO_PODR_UARTH_MASK +#define GPIO_PDDR_QSPI(x) GPIO_PODR_QSPI(x) +#define GPIO_PDDR_QSPI_MASK GPIO_PODR_QSPI_MASK +#define GPIO_PDDR_ETPU(x) GPIO_PODR_ETPU(x) +#define GPIO_PDDR_ETPU_MASK GPIO_PODR_ETPU_MASK + +/* Bit definitions and macros for GPIO_PPDSDR */ +#define GPIO_PPDSDR_ADDR(x) GPIO_PODR_ADDR(x) +#define GPIO_PPDSDR_ADDR_MASK GPIO_PODR_ADDR_MASK +#define GPIO_PPDSDR_BS(x) GPIO_PODR_BS(x) +#define GPIO_PPDSDR_BS_MASK GPIO_PODR_BS_MASK +#define GPIO_PPDSDR_CS(x) GPIO_PODR_CS(x) +#define GPIO_PPDSDR_CS_MASK GPIO_PODR_CS_MASK +#define GPIO_PPDSDR_SDRAM(X) GPIO_PODR_SDRAM(X) +#define GPIO_PPDSDR_SDRAM_MASK GPIO_PODR_SDRAM_MASK +#define GPIO_PPDSDR_FECI2C(x) GPIO_PPDSDR_BS(x) +#define GPIO_PPDSDR_FECI2C_MASK GPIO_PPDSDR_BS_MASK +#define GPIO_PPDSDR_UARTH(x) GPIO_PODR_UARTH(x) +#define GPIO_PPDSDR_UARTH_MASK GPIO_PODR_UARTH_MASK +#define GPIO_PPDSDR_QSPI(x) GPIO_PODR_QSPI(x) +#define GPIO_PPDSDR_QSPI_MASK GPIO_PODR_QSPI_MASK +#define GPIO_PPDSDR_ETPU(x) GPIO_PODR_ETPU(x) +#define GPIO_PPDSDR_ETPU_MASK GPIO_PODR_ETPU_MASK + +/* Bit definitions and macros for GPIO_PCLRR */ +#define GPIO_PCLRR_ADDR(x) GPIO_PODR_ADDR(x) +#define GPIO_PCLRR_ADDR_MASK GPIO_PODR_ADDR_MASK +#define GPIO_PCLRR_BS(x) GPIO_PODR_BS(x) +#define GPIO_PCLRR_BS_MASK GPIO_PODR_BS_MASK +#define GPIO_PCLRR_CS(x) GPIO_PODR_CS(x) +#define GPIO_PCLRR_CS_MASK GPIO_PODR_CS_MASK +#define GPIO_PCLRR_SDRAM(X) GPIO_PODR_SDRAM(X) +#define GPIO_PCLRR_SDRAM_MASK GPIO_PODR_SDRAM_MASK +#define GPIO_PCLRR_FECI2C(x) GPIO_PCLRR_BS(x) +#define GPIO_PCLRR_FECI2C_MASK GPIO_PCLRR_BS_MASK +#define GPIO_PCLRR_UARTH(x) GPIO_PODR_UARTH(x) +#define GPIO_PCLRR_UARTH_MASK GPIO_PODR_UARTH_MASK +#define GPIO_PCLRR_QSPI(x) GPIO_PODR_QSPI(x) +#define GPIO_PCLRR_QSPI_MASK GPIO_PODR_QSPI_MASK +#define GPIO_PCLRR_ETPU(x) GPIO_PODR_ETPU(x) +#define GPIO_PCLRR_ETPU_MASK GPIO_PODR_ETPU_MASK + +/* Bit definitions and macros for GPIO_PAR */ +#define GPIO_PAR_AD_ADDR23 (0x80) +#define GPIO_PAR_AD_ADDR22 (0x40) +#define GPIO_PAR_AD_ADDR21 (0x20) +#define GPIO_PAR_AD_DATAL (0x01) +#define GPIO_PAR_BUSCTL_OE (0x4000) +#define GPIO_PAR_BUSCTL_TA (0x1000) +#define GPIO_PAR_BUSCTL_TEA(x) (((x)&0x03)<<10) +#define GPIO_PAR_BUSCTL_TEA_MASK (0x0C00) +#define GPIO_PAR_BUSCTL_TEA_GPIO (0x0400) +#define GPIO_PAR_BUSCTL_TEA_DREQ1 (0x0800) +#define GPIO_PAR_BUSCTL_TEA_EXTBUS (0x0C00) +#define GPIO_PAR_BUSCTL_RWB (0x0100) +#define GPIO_PAR_BUSCTL_TSIZ1 (0x0040) +#define GPIO_PAR_BUSCTL_TSIZ0 (0x0010) +#define GPIO_PAR_BUSCTL_TS(x) (((x)&0x03)<<2) +#define GPIO_PAR_BUSCTL_TS_MASK (0x0C) +#define GPIO_PAR_BUSCTL_TS_GPIO (0x04) +#define GPIO_PAR_BUSCTL_TS_DACK2 (0x08) +#define GPIO_PAR_BUSCTL_TS_EXTBUS (0x0C) +#define GPIO_PAR_BUSCTL_TIP(x) ((x)&0x03) +#define GPIO_PAR_BUSCTL_TIP_MASK (0x03) +#define GPIO_PAR_BUSCTL_TIP_GPIO (0x01) +#define GPIO_PAR_BUSCTL_TIP_DREQ0 (0x02) +#define GPIO_PAR_BUSCTL_TIP_EXTBUS (0x03) +#define GPIO_PAR_BS(x) ((x)&0x0F) +#define GPIO_PAR_BS_MASK (0x0F) +#define GPIO_PAR_CS(x) (((x)&0x7F)<<1) +#define GPIO_PAR_CS_MASK (0xFE) +#define GPIO_PAR_CS_CS7 (0x80) +#define GPIO_PAR_CS_CS6 (0x40) +#define GPIO_PAR_CS_CS5 (0x20) +#define GPIO_PAR_CS_CS4 (0x10) +#define GPIO_PAR_CS_CS3 (0x08) +#define GPIO_PAR_CS_CS2 (0x04) +#define GPIO_PAR_CS_CS1 (0x02) +#define GPIO_PAR_CS_SD3 GPIO_PAR_CS_CS3 +#define GPIO_PAR_CS_SD2 GPIO_PAR_CS_CS2 +#define GPIO_PAR_SDRAM_CSSDCS(x) (((x)&0x03)<<6) +#define GPIO_PAR_SDRAM_CSSDCS_MASK (0xC0) +#define GPIO_PAR_SDRAM_SDWE (0x20) +#define GPIO_PAR_SDRAM_SCAS (0x10) +#define GPIO_PAR_SDRAM_SRAS (0x08) +#define GPIO_PAR_SDRAM_SCKE (0x04) +#define GPIO_PAR_SDRAM_SDCS(x) ((x)&0x03) +#define GPIO_PAR_SDRAM_SDCS_MASK (0x03) +#define GPIO_PAR_FECI2C_EMDC(x) (((x)&0x03)<<6) +#define GPIO_PAR_FECI2C_EMDC_MASK (0xC0) +#define GPIO_PAR_FECI2C_EMDC_U2TXD (0x40) +#define GPIO_PAR_FECI2C_EMDC_I2CSCL (0x80) +#define GPIO_PAR_FECI2C_EMDC_FECEMDC (0xC0) +#define GPIO_PAR_FECI2C_EMDIO(x) (((x)&0x03)<<4) +#define GPIO_PAR_FECI2C_EMDIO_MASK (0x30) +#define GPIO_PAR_FECI2C_EMDIO_U2RXD (0x10) +#define GPIO_PAR_FECI2C_EMDIO_I2CSDA (0x20) +#define GPIO_PAR_FECI2C_EMDIO_FECEMDIO (0x30) +#define GPIO_PAR_FECI2C_SCL(x) (((x)&0x03)<<2) +#define GPIO_PAR_FECI2C_SCL_MASK (0x0C) +#define GPIO_PAR_FECI2C_SCL_CAN0RX (0x08) +#define GPIO_PAR_FECI2C_SCL_I2CSCL (0x0C) +#define GPIO_PAR_FECI2C_SDA(x) ((x)&0x03) +#define GPIO_PAR_FECI2C_SDA_MASK (0x03) +#define GPIO_PAR_FECI2C_SDA_CAN0TX (0x02) +#define GPIO_PAR_FECI2C_SDA_I2CSDA (0x03) +#define GPIO_PAR_UART_DREQ2 (0x8000) +#define GPIO_PAR_UART_CAN1EN (0x4000) +#define GPIO_PAR_UART_U2RXD (0x2000) +#define GPIO_PAR_UART_U2TXD (0x1000) +#define GPIO_PAR_UART_U1RXD(x) (((x)&0x03)<<10) +#define GPIO_PAR_UART_U1RXD_MASK (0x0C00) +#define GPIO_PAR_UART_U1RXD_CAN0RX (0x0800) +#define GPIO_PAR_UART_U1RXD_U1RXD (0x0C00) +#define GPIO_PAR_UART_U1TXD(x) (((x)&0x03)<<8) +#define GPIO_PAR_UART_U1TXD_MASK (0x0300) +#define GPIO_PAR_UART_U1TXD_CAN0TX (0x0200) +#define GPIO_PAR_UART_U1TXD_U1TXD (0x0300) +#define GPIO_PAR_UART_U1CTS(x) (((x)&0x03)<<6) +#define GPIO_PAR_UART_U1CTS_MASK (0x00C0) +#define GPIO_PAR_UART_U1CTS_U2CTS (0x0080) +#define GPIO_PAR_UART_U1CTS_U1CTS (0x00C0) +#define GPIO_PAR_UART_U1RTS(x) (((x)&0x03)<<4) +#define GPIO_PAR_UART_U1RTS_MASK (0x0030) +#define GPIO_PAR_UART_U1RTS_U2RTS (0x0020) +#define GPIO_PAR_UART_U1RTS_U1RTS (0x0030) +#define GPIO_PAR_UART_U0RXD (0x0008) +#define GPIO_PAR_UART_U0TXD (0x0004) +#define GPIO_PAR_UART_U0CTS (0x0002) +#define GPIO_PAR_UART_U0RTS (0x0001) +#define GPIO_PAR_QSPI_CS1(x) (((x)&0x03)<<6) +#define GPIO_PAR_QSPI_CS1_MASK (0xC0) +#define GPIO_PAR_QSPI_CS1_SDRAMSCKE (0x80) +#define GPIO_PAR_QSPI_CS1_QSPICS1 (0xC0) +#define GPIO_PAR_QSPI_CS0 (0x20) +#define GPIO_PAR_QSPI_DIN(x) (((x)&0x03)<<3) +#define GPIO_PAR_QSPI_DIN_MASK (0x18) +#define GPIO_PAR_QSPI_DIN_I2CSDA (0x10) +#define GPIO_PAR_QSPI_DIN_QSPIDIN (0x18) +#define GPIO_PAR_QSPI_DOUT (0x04) +#define GPIO_PAR_QSPI_SCK(x) ((x)&0x03) +#define GPIO_PAR_QSPI_SCK_MASK (0x03) +#define GPIO_PAR_QSPI_SCK_I2CSCL (0x02) +#define GPIO_PAR_QSPI_SCK_QSPISCK (0x03) +#define GPIO_PAR_DT3IN(x) (((x)&0x03)<<14) +#define GPIO_PAR_DT3IN_MASK (0xC000) +#define GPIO_PAR_DT3IN_QSPICS2 (0x4000) +#define GPIO_PAR_DT3IN_U2CTS (0x8000) +#define GPIO_PAR_DT3IN_DT3IN (0xC000) +#define GPIO_PAR_DT2IN(x) (((x)&0x03)<<12) +#define GPIO_PAR_DT2IN_MASK (0x3000) +#define GPIO_PAR_DT2IN_DT2OUT (0x1000) +#define GPIO_PAR_DT2IN_DREQ2 (0x2000) +#define GPIO_PAR_DT2IN_DT2IN (0x3000) +#define GPIO_PAR_DT1IN(x) (((x)&0x03)<<10) +#define GPIO_PAR_DT1IN_MASK (0x0C00) +#define GPIO_PAR_DT1IN_DT1OUT (0x0400) +#define GPIO_PAR_DT1IN_DREQ1 (0x0800) +#define GPIO_PAR_DT1IN_DT1IN (0x0C00) +#define GPIO_PAR_DT0IN(x) (((x)&0x03)<<8) +#define GPIO_PAR_DT0IN_MASK (0x0300) +#define GPIO_PAR_DT0IN_DREQ0 (0x0200) +#define GPIO_PAR_DT0IN_DT0IN (0x0300) +#define GPIO_PAR_DT3OUT(x) (((x)&0x03)<<6) +#define GPIO_PAR_DT3OUT_MASK (0x00C0) +#define GPIO_PAR_DT3OUT_QSPICS3 (0x0040) +#define GPIO_PAR_DT3OUT_U2RTS (0x0080) +#define GPIO_PAR_DT3OUT_DT3OUT (0x00C0) +#define GPIO_PAR_DT2OUT(x) (((x)&0x03)<<4) +#define GPIO_PAR_DT2OUT_MASK (0x0030) +#define GPIO_PAR_DT2OUT_DACK2 (0x0020) +#define GPIO_PAR_DT2OUT_DT2OUT (0x0030) +#define GPIO_PAR_DT1OUT(x) (((x)&0x03)<<2) +#define GPIO_PAR_DT1OUT_MASK (0x000C) +#define GPIO_PAR_DT1OUT_DACK1 (0x0008) +#define GPIO_PAR_DT1OUT_DT1OUT (0x000C) +#define GPIO_PAR_DT0OUT(x) ((x)&0x03) +#define GPIO_PAR_DT0OUT_MASK (0x0003) +#define GPIO_PAR_DT0OUT_DACK0 (0x0002) +#define GPIO_PAR_DT0OUT_DT0OUT (0x0003) +#define GPIO_PAR_ETPU_TCRCLK (0x04) +#define GPIO_PAR_ETPU_UTPU_ODIS (0x02) +#define GPIO_PAR_ETPU_LTPU_ODIS (0x01) + +/* Bit definitions and macros for GPIO_DSCR */ +#define GPIO_DSCR_EIM_EIM1 (0x10) +#define GPIO_DSCR_EIM_EIM0 (0x01) +#define GPIO_DSCR_ETPU_ETPU31_24 (0x40) +#define GPIO_DSCR_ETPU_ETPU23_16 (0x10) +#define GPIO_DSCR_ETPU_ETPU15_8 (0x04) +#define GPIO_DSCR_ETPU_ETPU7_0 (0x01) +#define GPIO_DSCR_FECI2C_FEC (0x10) +#define GPIO_DSCR_FECI2C_I2C (0x01) +#define GPIO_DSCR_UART_IRQ (0x40) +#define GPIO_DSCR_UART_UART2 (0x10) +#define GPIO_DSCR_UART_UART1 (0x04) +#define GPIO_DSCR_UART_UART0 (0x01) +#define GPIO_DSCR_QSPI_QSPI (0x01) +#define GPIO_DSCR_TIMER (0x01) + +/********************************************************************* +* Chip Configuration Module (CCM) +*********************************************************************/ +/* Bit definitions and macros for CCM_RCR */ +#define CCM_RCR_SOFTRST (0x80) +#define CCM_RCR_FRCRSTOUT (0x40) + +/* Bit definitions and macros for CCM_RSR */ +#define CCM_RSR_SOFT (0x20) +#define CCM_RSR_WDR (0x10) +#define CCM_RSR_POR (0x08) +#define CCM_RSR_EXT (0x04) +#define CCM_RSR_LOC (0x02) +#define CCM_RSR_LOL (0x01) + +/* Bit definitions and macros for CCM_CCR */ +#define CCM_CCR_LOAD (0x8000) +#define CCM_CCR_SZEN (0x0040) +#define CCM_CCR_PSTEN (0x0020) +#define CCM_CCR_BME (0x0008) +#define CCM_CCR_BMT(x) ((x)&0x07) +#define CCM_CCR_BMT_MASK (0x0007) +#define CCM_CCR_BMT_64K (0x0000) +#define CCM_CCR_BMT_32K (0x0001) +#define CCM_CCR_BMT_16K (0x0002) +#define CCM_CCR_BMT_8K (0x0003) +#define CCM_CCR_BMT_4K (0x0004) +#define CCM_CCR_BMT_2K (0x0005) +#define CCM_CCR_BMT_1K (0x0006) +#define CCM_CCR_BMT_512 (0x0007) + +/* Bit definitions and macros for CCM_RCON */ +#define CCM_RCON_RCSC(x) (((x)&0x0003)<<8) +#define CCM_RCON_RLOAD (0x0020) +#define CCM_RCON_BOOTPS(x) (((x)&0x0003)<<3) +#define CCM_RCON_BOOTPS_MASK (0x0018) +#define CCM_RCON_BOOTPS_32 (0x0018) +#define CCM_RCON_BOOTPS_16 (0x0008) +#define CCM_RCON_BOOTPS_8 (0x0010) +#define CCM_RCON_MODE (0x0001) + +/* Bit definitions and macros for CCM_CIR */ +#define CCM_CIR_PIN(x) (((x)&0x03FF)<<6) +#define CCM_CIR_PRN(x) ((x)&0x003F) + +/********************************************************************* +* PLL Clock Module +*********************************************************************/ +/* Bit definitions and macros for PLL_SYNCR */ +#define PLL_SYNCR_MFD(x) (((x)&0x07)<<24) +#define PLL_SYNCR_MFD_MASK (0x07000000) +#define PLL_SYNCR_RFC(x) (((x)&0x07)<<19) +#define PLL_SYNCR_RFC_MASK (0x00380000) +#define PLL_SYNCR_LOCEN (0x00040000) +#define PLL_SYNCR_LOLRE (0x00020000) +#define PLL_SYNCR_LOCRE (0x00010000) +#define PLL_SYNCR_DISCLK (0x00008000) +#define PLL_SYNCR_LOLIRQ (0x00004000) +#define PLL_SYNCR_LOCIRQ (0x00002000) +#define PLL_SYNCR_RATE (0x00001000) +#define PLL_SYNCR_DEPTH(x) (((x)&0x03)<<10) +#define PLL_SYNCR_EXP(x) ((x)&0x03FF) + +/* Bit definitions and macros for PLL_SYNSR */ +#define PLL_SYNSR_LOLF (0x00000200) +#define PLL_SYNSR_LOC (0x00000100) +#define PLL_SYNSR_MODE (0x00000080) +#define PLL_SYNSR_PLLSEL (0x00000040) +#define PLL_SYNSR_PLLREF (0x00000020) +#define PLL_SYNSR_LOCKS (0x00000010) +#define PLL_SYNSR_LOCK (0x00000008) +#define PLL_SYNSR_LOCF (0x00000004) +#define PLL_SYNSR_CALDONE (0x00000002) +#define PLL_SYNSR_CALPASS (0x00000001) + +/********************************************************************* + * Edge Port +*********************************************************************/ +#define EPORT_EPPAR_EPPA7(x) (((x)&0x03)<<14) +#define EPORT_EPPAR_EPPA6(x) (((x)&0x03)<<12) +#define EPORT_EPPAR_EPPA5(x) (((x)&0x03)<<10) +#define EPORT_EPPAR_EPPA4(x) (((x)&0x03)<<8) +#define EPORT_EPPAR_EPPA3(x) (((x)&0x03)<<6) +#define EPORT_EPPAR_EPPA2(x) (((x)&0x03)<<4) +#define EPORT_EPPAR_EPPA1(x) (((x)&0x03)<<2) + +#define EPORT_EPDDR_EPDD7(x) EPORT_EPPAR_EPPA7(x) +#define EPORT_EPDDR_EPDD6(x) EPORT_EPPAR_EPPA6(x) +#define EPORT_EPDDR_EPDD5(x) EPORT_EPPAR_EPPA5(x) +#define EPORT_EPDDR_EPDD4(x) EPORT_EPPAR_EPPA4(x) +#define EPORT_EPDDR_EPDD3(x) EPORT_EPPAR_EPPA3(x) +#define EPORT_EPDDR_EPDD2(x) EPORT_EPPAR_EPPA2(x) +#define EPORT_EPDDR_EPDD1(x) EPORT_EPPAR_EPPA1(x) + +#define EPORT_EPIER_EPIE7 (0x80) +#define EPORT_EPIER_EPIE6 (0x40) +#define EPORT_EPIER_EPIE5 (0x20) +#define EPORT_EPIER_EPIE4 (0x10) +#define EPORT_EPIER_EPIE3 (0x08) +#define EPORT_EPIER_EPIE2 (0x04) +#define EPORT_EPIER_EPIE1 (0x02) + +#define EPORT_EPDR_EPDR7 EPORT_EPIER_EPIE7 +#define EPORT_EPDR_EPDR6 EPORT_EPIER_EPIE6 +#define EPORT_EPDR_EPDR5 EPORT_EPIER_EPIE5 +#define EPORT_EPDR_EPDR4 EPORT_EPIER_EPIE4 +#define EPORT_EPDR_EPDR3 EPORT_EPIER_EPIE3 +#define EPORT_EPDR_EPDR2 EPORT_EPIER_EPIE2 +#define EPORT_EPDR_EPDR1 EPORT_EPIER_EPIE1 + +#define EPORT_EPPDR_EPPDR7 EPORT_EPIER_EPIE7 +#define EPORT_EPPDR_EPPDR6 EPORT_EPIER_EPIE6 +#define EPORT_EPPDR_EPPDR5 EPORT_EPIER_EPIE5 +#define EPORT_EPPDR_EPPDR4 EPORT_EPIER_EPIE4 +#define EPORT_EPPDR_EPPDR3 EPORT_EPIER_EPIE3 +#define EPORT_EPPDR_EPPDR2 EPORT_EPIER_EPIE2 +#define EPORT_EPPDR_EPPDR1 EPORT_EPIER_EPIE1 + +/********************************************************************* +* Watchdog Timer Modules (WTM) +*********************************************************************/ +/* Bit definitions and macros for WTM_WCR */ +#define WTM_WCR_WAIT (0x0008) +#define WTM_WCR_DOZE (0x0004) +#define WTM_WCR_HALTED (0x0002) +#define WTM_WCR_EN (0x0001) + +/********************************************************************* +* FlexCAN Module (CAN) +*********************************************************************/ +/* Bit definitions and macros for CAN_CANMCR */ +#define CANMCR_MDIS (0x80000000) +#define CANMCR_FRZ (0x40000000) +#define CANMCR_HALT (0x10000000) +#define CANMCR_NORDY (0x08000000) +#define CANMCR_SOFTRST (0x02000000) +#define CANMCR_FRZACK (0x01000000) +#define CANMCR_SUPV (0x00800000) +#define CANMCR_LPMACK (0x00100000) +#define CANMCR_MAXMB(x) (((x)&0x0F)) + +/* Bit definitions and macros for CAN_CANCTRL */ +#define CANCTRL_PRESDIV(x) (((x)&0xFF)<<24) +#define CANCTRL_RJW(x) (((x)&0x03)<<22) +#define CANCTRL_PSEG1(x) (((x)&0x07)<<19) +#define CANCTRL_PSEG2(x) (((x)&0x07)<<16) +#define CANCTRL_BOFFMSK (0x00008000) +#define CANCTRL_ERRMSK (0x00004000) +#define CANCTRL_CLKSRC (0x00002000) +#define CANCTRL_LPB (0x00001000) +#define CANCTRL_SMP (0x00000080) +#define CANCTRL_BOFFREC (0x00000040) +#define CANCTRL_TSYNC (0x00000020) +#define CANCTRL_LBUF (0x00000010) +#define CANCTRL_LOM (0x00000008) +#define CANCTRL_PROPSEG(x) (((x)&0x07)) + +/* Bit definitions and macros for CAN_TIMER */ +#define TIMER_TIMER(x) ((x)&0xFFFF) + +/* Bit definitions and macros for CAN_RXGMASK */ +#define RXGMASK_MI(x) ((x)&0x1FFFFFFF) + +/* Bit definitions and macros for CAN_ERRCNT */ +#define ERRCNT_TXECTR(x) (((x)&0xFF)) +#define ERRCNT_RXECTR(x) (((x)&0xFF)<<8) + +/* Bit definitions and macros for CAN_ERRSTAT */ +#define ERRSTAT_BITERR1 (0x00008000) +#define ERRSTAT_BITERR0 (0x00004000) +#define ERRSTAT_ACKERR (0x00002000) +#define ERRSTAT_CRCERR (0x00001000) +#define ERRSTAT_FRMERR (0x00000800) +#define ERRSTAT_STFERR (0x00000400) +#define ERRSTAT_TXWRN (0x00000200) +#define ERRSTAT_RXWRN (0x00000100) +#define ERRSTAT_IDLE (0x00000080) +#define ERRSTAT_TXRX (0x00000040) +#define ERRSTAT_FLT_BUSOFF (0x00000020) +#define ERRSTAT_FLT_PASSIVE (0x00000010) +#define ERRSTAT_FLT_ACTIVE (0x00000000) +#define ERRSTAT_BOFFINT (0x00000004) +#define ERRSTAT_ERRINT (0x00000002) + +/* Bit definitions and macros for CAN_IMASK */ +#define IMASK_BUF15M (0x00008000) +#define IMASK_BUF14M (0x00004000) +#define IMASK_BUF13M (0x00002000) +#define IMASK_BUF12M (0x00001000) +#define IMASK_BUF11M (0x00000800) +#define IMASK_BUF10M (0x00000400) +#define IMASK_BUF9M (0x00000200) +#define IMASK_BUF8M (0x00000100) +#define IMASK_BUF7M (0x00000080) +#define IMASK_BUF6M (0x00000040) +#define IMASK_BUF5M (0x00000020) +#define IMASK_BUF4M (0x00000010) +#define IMASK_BUF3M (0x00000008) +#define IMASK_BUF2M (0x00000004) +#define IMASK_BUF1M (0x00000002) +#define IMASK_BUF0M (0x00000001) + +/* Bit definitions and macros for CAN_IFLAG */ +#define IFLAG_BUF15I (0x00008000) +#define IFLAG_BUF14I (0x00004000) +#define IFLAG_BUF13I (0x00002000) +#define IFLAG_BUF12I (0x00001000) +#define IFLAG_BUF11I (0x00000800) +#define IFLAG_BUF10I (0x00000400) +#define IFLAG_BUF9I (0x00000200) +#define IFLAG_BUF8I (0x00000100) +#define IFLAG_BUF7I (0x00000080) +#define IFLAG_BUF6I (0x00000040) +#define IFLAG_BUF5I (0x00000020) +#define IFLAG_BUF4I (0x00000010) +#define IFLAG_BUF3I (0x00000008) +#define IFLAG_BUF2I (0x00000004) +#define IFLAG_BUF1I (0x00000002) +#define IFLAG_BUF0I (0x00000001) + +#endif /* mcf5235_h */ diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h new file mode 100644 index 00000000000..7f544c839fd --- /dev/null +++ b/include/configs/M5235EVB.h @@ -0,0 +1,261 @@ +/* + * Configuation settings for the Freescale MCF5329 FireEngine board. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef _M5235EVB_H +#define _M5235EVB_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_MCF523x /* define processor family */ +#define CONFIG_M5235 /* define processor type */ + +#undef DEBUG + +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } + +#undef CONFIG_WATCHDOG +#define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* Command line configuration */ +#include + +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO + +#undef CONFIG_CMD_LOADB +#undef CONFIG_CMD_LOADS + +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_MULTI 1 +# define CONFIG_MII 1 +# define CFG_DISCOVER_PHY +# define CFG_RX_ETH_BUFFER 8 +# define CFG_FAULT_ECHO_LINK_DOWN + +# define CFG_FEC0_PINMUX 0 +# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 +/* If CFG_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CFG_DISCOVER_PHY +# define FECDUPLEX FULL +# define FECSPEED _100BASET +# else +# ifndef CFG_FAULT_ECHO_LINK_DOWN +# define CFG_FAULT_ECHO_LINK_DOWN +# endif +# endif /* CFG_DISCOVER_PHY */ +#endif + +/* Timer */ +#define CONFIG_MCFTMR +#undef CONFIG_MCFPIT + +/* I2C */ +#define CONFIG_FSL_I2C +#define CONFIG_HARD_I2C /* I2C with hw support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 80000 +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_OFFSET 0x00000300 +#define CFG_IMMR CFG_MBAR + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ +#define CONFIG_BOOTFILE "u-boot.bin" +#ifdef CONFIG_MCFFEC +# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 +# define CONFIG_IPADDR 192.162.1.2 +# define CONFIG_NETMASK 255.255.255.0 +# define CONFIG_SERVERIP 192.162.1.1 +# define CONFIG_GATEWAYIP 192.162.1.1 +# define CONFIG_OVERWRITE_ETHADDR_ONCE +#endif /* FEC_ENET */ + +#define CONFIG_HOSTNAME M5235EVB +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "loadaddr=10000\0" \ + "u-boot=u-boot.bin\0" \ + "load=tftp ${loadaddr) ${u-boot}\0" \ + "upd=run load; run prog\0" \ + "prog=prot off ffe00000 ffe3ffff;" \ + "era ffe00000 ffe3ffff;" \ + "cp.b ${loadaddr} ffe00000 ${filesize};"\ + "save\0" \ + "" + +#define CONFIG_PRAM 512 /* 512 KB */ +#define CFG_PROMPT "-> " +#define CFG_LONGHELP /* undef to save memory */ + +#if defined(CONFIG_KGDB) +# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +# define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE+0x20000) + +#define CFG_HZ 1000 +#define CFG_CLK 75000000 +#define CFG_CPU_CLK CFG_CLK * 2 + +#define CFG_MBAR 0x40000000 + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR 0x20000000 +#define CFG_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */ +#define CFG_INIT_RAM_CTRL 0x21 +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE - 0x10) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ + +#define CFG_MEMTEST_START CFG_SDRAM_BASE + 0x400 +#define CFG_MEMTEST_END ((CFG_SDRAM_SIZE - 3) << 20) + +#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ + +#define CFG_BOOTPARAMS_LEN 64*1024 +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization ?? + */ +/* Initial Memory map for Linux */ +#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_FLASH_CFI +#ifdef CFG_FLASH_CFI +# define CFG_FLASH_CFI_DRIVER 1 +# define CFG_FLASH_SIZE 0x800000 /* Max size that the board might have */ +#ifdef NORFLASH_PS32BIT +# define CFG_FLASH_CFI_WIDTH FLASH_CFI_32BIT +#else +# define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT +#endif +# define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +# define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ +# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ +#endif + +#define CFG_FLASH_BASE (CFG_CS0_BASE << 16) + +/* Configuration for environment + * Environment is embedded in u-boot in the second sector of the flash + */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_IS_EMBEDDED 1 +#ifdef NORFLASH_PS32BIT +# define CFG_ENV_OFFSET (0x8000) +# define CFG_ENV_SIZE 0x4000 +# define CFG_ENV_SECT_SIZE 0x4000 +#else +# define CFG_ENV_OFFSET (0x4000) +# define CFG_ENV_SIZE 0x2000 +# define CFG_ENV_SECT_SIZE 0x2000 +#endif + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 + +/*----------------------------------------------------------------------- + * Chipselect bank definitions + */ +/* + * CS0 - NOR Flash 1, 2, 4, or 8MB + * CS1 - Available + * CS2 - Available + * CS3 - Available + * CS4 - Available + * CS5 - Available + * CS6 - Available + * CS7 - Available + */ +#ifdef NORFLASH_PS32BIT +# define CFG_CS0_BASE 0xFFC0 +# define CFG_CS0_MASK 0x003f0001 +# define CFG_CS0_CTRL 0x1D00 +#else +# define CFG_CS0_BASE 0xFFE0 +# define CFG_CS0_MASK 0x001f0001 +# define CFG_CS0_CTRL 0x1D80 +#endif + +#endif /* _M5329EVB_H */ -- cgit v1.3.1 From 7608d75f9c87c9eb5b3a43219d0506d3e979a13f Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Tue, 21 Aug 2007 17:00:17 -0500 Subject: support board vendor-common makefiles if a board/$(VENDOR)/common/Makefile exists, build it. also add the first such case, board/freescale/common/Makefile, to handle building board-shared EEPROM, PIXIS, and MDS-PIB code, as dictated by board configuration. thusly get rid of alternate build dir errors such as: FATAL: can't create /work/wd/tmp/u-boot-ppc/board/freescale/mpc8360emds/../common/pq-mds-pib.o: No such file or directory by putting the common/ mkdir command in its proper place (the common Makefile). Common bits from existing individual board Makefiles have been removed. Signed-off-by: Kim Phillips --- Makefile | 2 ++ board/freescale/common/Makefile | 56 ++++++++++++++++++++++++++++++++++++ board/freescale/common/pixis.c | 3 ++ board/freescale/common/pq-mds-pib.c | 3 ++ board/freescale/mpc832xemds/Makefile | 2 +- board/freescale/mpc8360emds/Makefile | 2 +- board/freescale/mpc8544ds/Makefile | 7 +---- board/freescale/mpc8641hpcn/Makefile | 8 +----- include/configs/MPC8544DS.h | 1 + include/configs/MPC8641HPCN.h | 1 + 10 files changed, 70 insertions(+), 15 deletions(-) create mode 100644 board/freescale/common/Makefile (limited to 'Makefile') diff --git a/Makefile b/Makefile index 2e15ceaf03e..0477cd3dc2e 100644 --- a/Makefile +++ b/Makefile @@ -190,6 +190,8 @@ endif OBJS := $(addprefix $(obj),$(OBJS)) LIBS = lib_generic/libgeneric.a +LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \ + "board/$(VENDOR)/common/lib$(VENDOR).a"; fi) LIBS += board/$(BOARDDIR)/lib$(BOARD).a LIBS += cpu/$(CPU)/lib$(CPU).a ifdef SOC diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile new file mode 100644 index 00000000000..44f613e4185 --- /dev/null +++ b/board/freescale/common/Makefile @@ -0,0 +1,56 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)board/$(VENDOR)/common) +endif + +LIB = $(obj)lib$(VENDOR).a + +COBJS := sys_eeprom.o \ + pixis.o \ + pq-mds-pib.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/common/pixis.c b/board/freescale/common/pixis.c index 99cc2ee197e..ae4bef1877e 100644 --- a/board/freescale/common/pixis.c +++ b/board/freescale/common/pixis.c @@ -27,6 +27,8 @@ #include #include +#ifdef CONFIG_FSL_PIXIS + #include "pixis.h" @@ -470,3 +472,4 @@ U_BOOT_CMD( " pixis_reset altbank cf \n" " pixis_reset cf \n" ); +#endif /* CONFIG_FSL_PIXIS */ diff --git a/board/freescale/common/pq-mds-pib.c b/board/freescale/common/pq-mds-pib.c index 8c013c72fb7..d79f2eb2e82 100644 --- a/board/freescale/common/pq-mds-pib.c +++ b/board/freescale/common/pq-mds-pib.c @@ -12,6 +12,8 @@ #include #include +#ifdef CONFIG_PQ_MDS_PIB + #include "pq-mds-pib.h" int pib_init(void) @@ -100,3 +102,4 @@ int pib_init(void) i2c_set_bus_num(orig_i2c_bus); return 0; } +#endif /* CONFIG_PQ_MDS_PIB */ diff --git a/board/freescale/mpc832xemds/Makefile b/board/freescale/mpc832xemds/Makefile index ea52484c063..5ec7a871d4d 100644 --- a/board/freescale/mpc832xemds/Makefile +++ b/board/freescale/mpc832xemds/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o pci.o ../common/pq-mds-pib.o +COBJS := $(BOARD).o pci.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/freescale/mpc8360emds/Makefile b/board/freescale/mpc8360emds/Makefile index ea52484c063..5ec7a871d4d 100644 --- a/board/freescale/mpc8360emds/Makefile +++ b/board/freescale/mpc8360emds/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o pci.o ../common/pq-mds-pib.o +COBJS := $(BOARD).o pci.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/freescale/mpc8544ds/Makefile b/board/freescale/mpc8544ds/Makefile index 308f707de03..006fdc95e70 100644 --- a/board/freescale/mpc8544ds/Makefile +++ b/board/freescale/mpc8544ds/Makefile @@ -24,14 +24,9 @@ include $(TOPDIR)/config.mk -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o \ - ../common/pixis.o +COBJS := $(BOARD).o SOBJS := init.o diff --git a/board/freescale/mpc8641hpcn/Makefile b/board/freescale/mpc8641hpcn/Makefile index 93b015d4743..201da3ebead 100644 --- a/board/freescale/mpc8641hpcn/Makefile +++ b/board/freescale/mpc8641hpcn/Makefile @@ -23,15 +23,9 @@ include $(TOPDIR)/config.mk -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o \ - ../common/sys_eeprom.o \ - ../common/pixis.o +COBJS := $(BOARD).o SOBJS := init.o diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 07631b921f6..9743f031e0b 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -181,6 +181,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CFG_BR3_PRELIM 0xf8100801 /* port size 8bit */ #define CFG_OR3_PRELIM 0xfff06ff7 /* 1MB PIXIS area*/ +#define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */ #define PIXIS_BASE 0xf8100000 /* PIXIS registers */ #define PIXIS_ID 0x0 /* Board ID at offset 0 */ #define PIXIS_VER 0x1 /* Board version at offset 1 */ diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index bf25f7f4f98..7d8a380dc04 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -185,6 +185,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CFG_OR3_PRELIM 0xfff06ff7 /* 1MB PIXIS area*/ +#define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */ #define PIXIS_BASE 0xf8100000 /* PIXIS registers */ #define PIXIS_ID 0x0 /* Board ID at offset 0 */ #define PIXIS_VER 0x1 /* Board version at offset 1 */ -- cgit v1.3.1 From 5e5803e119de3bebd76fc9a57baac0b5aeccc8a3 Mon Sep 17 00:00:00 2001 From: stefano babic Date: Thu, 30 Aug 2007 23:01:49 +0200 Subject: PXA270: Added support for TrizepsIV board. This patch add support for the Trizeps IV module (520Mhz). Signed-off-by: Stefano Babic --- Makefile | 3 + board/trizepsiv/Makefile | 51 ++++ board/trizepsiv/config.mk | 3 + board/trizepsiv/conxs.c | 146 ++++++++++++ board/trizepsiv/eeprom.c | 85 +++++++ board/trizepsiv/lowlevel_init.S | 503 ++++++++++++++++++++++++++++++++++++++++ board/trizepsiv/pxavoltage.S | 31 +++ board/trizepsiv/u-boot.lds | 56 +++++ drivers/dm9000x.c | 16 +- include/configs/trizepsiv.h | 325 ++++++++++++++++++++++++++ 10 files changed, 1217 insertions(+), 2 deletions(-) create mode 100644 board/trizepsiv/Makefile create mode 100644 board/trizepsiv/config.mk create mode 100644 board/trizepsiv/conxs.c create mode 100644 board/trizepsiv/eeprom.c create mode 100644 board/trizepsiv/lowlevel_init.S create mode 100644 board/trizepsiv/pxavoltage.S create mode 100644 board/trizepsiv/u-boot.lds create mode 100644 include/configs/trizepsiv.h (limited to 'Makefile') diff --git a/Makefile b/Makefile index 0477cd3dc2e..0371d4619d4 100644 --- a/Makefile +++ b/Makefile @@ -2334,6 +2334,9 @@ scpu_config: unconfig pxa255_idp_config: unconfig @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp +trizepsiv_config : unconfig + @$(MKCONFIG) $(@:_config=) arm pxa trizepsiv + wepep250_config : unconfig @$(MKCONFIG) $(@:_config=) arm pxa wepep250 diff --git a/board/trizepsiv/Makefile b/board/trizepsiv/Makefile new file mode 100644 index 00000000000..115e17ded92 --- /dev/null +++ b/board/trizepsiv/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := conxs.o eeprom.o +SOBJS := lowlevel_init.o pxavoltage.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/trizepsiv/config.mk b/board/trizepsiv/config.mk new file mode 100644 index 00000000000..4486f6b96db --- /dev/null +++ b/board/trizepsiv/config.mk @@ -0,0 +1,3 @@ +TEXT_BASE =0xa1f00000 +# 0xa1700000 +#TEXT_BASE = 0 diff --git a/board/trizepsiv/conxs.c b/board/trizepsiv/conxs.c new file mode 100644 index 00000000000..7c6c8550074 --- /dev/null +++ b/board/trizepsiv/conxs.c @@ -0,0 +1,146 @@ +/* + * (C) Copyright 2007 + * Stefano Babic, DENX Gmbh, sbabic@denx.de + * + * (C) Copyright 2004 + * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net + * + * (C) Copyright 2002 + * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH + * Marius Groeger + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#define RH_A_PSM (1 << 8) /* power switching mode */ +#define RH_A_NPS (1 << 9) /* no power switching */ + +extern struct serial_device serial_ffuart_device; +extern struct serial_device serial_btuart_device; +extern struct serial_device serial_stuart_device; + +/* ------------------------------------------------------------------------- */ + +/* + * Miscelaneous platform dependent initialisations + */ + +void usb_board_init(void) +{ + UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) & + ~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE); + + UHCHR |= UHCHR_FSBIR; + + while (UHCHR & UHCHR_FSBIR); + + UHCHR &= ~UHCHR_SSE; + UHCHIE = (UHCHIE_UPRIE | UHCHIE_RWIE); + + /* Clear any OTG Pin Hold */ + if (PSSR & PSSR_OTGPH) + PSSR |= PSSR_OTGPH; + + UHCRHDA &= ~(RH_A_NPS); + UHCRHDA |= RH_A_PSM; + + /* Set port power control mask bits, only 3 ports. */ + UHCRHDB |= (0x7<<17); +} + +void usb_board_init_fail(void) +{ + return; +} + +void usb_board_stop(void) +{ + UHCHR |= UHCHR_FHR; + udelay(11); + UHCHR &= ~UHCHR_FHR; + + UHCCOMS |= 1; + udelay(10); + + CKEN &= ~CKEN10_USBHOST; + + puts("Called USB STOP\n"); + return; +} + +int board_init (void) +{ + /* memory and cpu-speed are setup before relocation */ + /* so we do _nothing_ here */ + + /* arch number of ConXS Board */ + gd->bd->bi_arch_number = 776; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = 0xa000003c; + + return 0; +} + +int board_late_init(void) +{ +#if defined(CONFIG_SERIAL_MULTI) + char *console=getenv("boot_console"); + + if ((strcmp(console,"serial_btuart") == 0) || + (strcmp(console,"serial_stuart") == 0) || + (strcmp(console,"serial_ffuart") == 0)) { + setenv("stdout",console); + setenv("stdin", console); + setenv("stderr",console); + } else { + setenv("stdout", "serial"); + setenv("stdin", "serial"); + setenv("stderr", "serial"); + } +#endif + return 0; +} + +struct serial_device *default_serial_console (void) +{ + return &serial_ffuart_device; +} + +int dram_init (void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + gd->bd->bi_dram[1].start = PHYS_SDRAM_2; + gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; + gd->bd->bi_dram[2].start = PHYS_SDRAM_3; + gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE; + gd->bd->bi_dram[3].start = PHYS_SDRAM_4; + gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE; + + return 0; +} diff --git a/board/trizepsiv/eeprom.c b/board/trizepsiv/eeprom.c new file mode 100644 index 00000000000..3d3bc00221b --- /dev/null +++ b/board/trizepsiv/eeprom.c @@ -0,0 +1,85 @@ +/* + * (C) Copyright 2007 + * Stefano Babic, DENX Software Engineering, sbabic@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +static unsigned char srom[128]; +extern u16 read_srom_word(int); +extern void write_srom_word(int offset, u16 val); + +static int do_read_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { + int i; + + for (i=0; i < 0x40; i++) { + if (!(i % 0x10)) + printf("\n%08lx:", i); + printf(" %04x", read_srom_word(i)); + } + printf ("\n"); + return (0); +} + +static int do_write_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { + int offset,value; + + if (argc < 4) { + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + offset=simple_strtoul(argv[2],NULL,16); + value=simple_strtoul(argv[3],NULL,16); + if (offset > 0x40) { + printf("Wrong offset : 0x%x\n",offset); + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + write_srom_word(offset, value); + return (0); +} + +int do_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { + if (argc < 2) { + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + if (strcmp (argv[1],"read") == 0) { + return (do_read_dm9000_eeprom(cmdtp,flag,argc,argv)); + } else if (strcmp (argv[1],"write") == 0) { + return (do_write_dm9000_eeprom(cmdtp,flag,argc,argv)); + } else { + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } +} + +U_BOOT_CMD( + dm9000ee,4,1,do_dm9000_eeprom, + "dm9000ee- Read/Write eeprom connected to Ethernet Controller\n", + "\ndm9000ee write \n" + "\tdm9000ee read \n" + "\tword:\t\t00-02 : MAC Address\n" + "\t\t\t03-07 : DM9000 Configuration\n" + "\t\t\t08-63 : User data\n"); diff --git a/board/trizepsiv/lowlevel_init.S b/board/trizepsiv/lowlevel_init.S new file mode 100644 index 00000000000..d8869381acc --- /dev/null +++ b/board/trizepsiv/lowlevel_init.S @@ -0,0 +1,503 @@ +/* + * This was originally from the Lubbock u-boot port. + * + * Most of this taken from Redboot hal_platform_setup.h with cleanup + * + * NOTE: I haven't clean this up considerably, just enough to get it + * running. See hal_platform_setup.h for the source. See + * board/cradle/lowlevel_init.S for another PXA250 setup that is + * much cleaner. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +/* wait for coprocessor write complete */ + .macro CPWAIT reg + mrc p15,0,\reg,c2,c0,0 + mov \reg,\reg + sub pc,pc,#4 + .endm + + +/* + * Memory setup + */ + +.globl lowlevel_init +lowlevel_init: + + /* Set up GPIO pins first ----------------------------------------- */ + + ldr r0, =GPSR0 + ldr r1, =CFG_GPSR0_VAL + str r1, [r0] + + ldr r0, =GPSR1 + ldr r1, =CFG_GPSR1_VAL + str r1, [r0] + + ldr r0, =GPSR2 + ldr r1, =CFG_GPSR2_VAL + str r1, [r0] + + ldr r0, =GPSR3 + ldr r1, =CFG_GPSR3_VAL + str r1, [r0] + + ldr r0, =GPCR0 + ldr r1, =CFG_GPCR0_VAL + str r1, [r0] + + ldr r0, =GPCR1 + ldr r1, =CFG_GPCR1_VAL + str r1, [r0] + + ldr r0, =GPCR2 + ldr r1, =CFG_GPCR2_VAL + str r1, [r0] + + ldr r0, =GPCR3 + ldr r1, =CFG_GPCR3_VAL + str r1, [r0] + + ldr r0, =GRER0 + ldr r1, =CFG_GRER0_VAL + str r1, [r0] + + ldr r0, =GRER1 + ldr r1, =CFG_GRER1_VAL + str r1, [r0] + + ldr r0, =GRER2 + ldr r1, =CFG_GRER2_VAL + str r1, [r0] + + ldr r0, =GRER3 + ldr r1, =CFG_GRER3_VAL + str r1, [r0] + + ldr r0, =GFER0 + ldr r1, =CFG_GFER0_VAL + str r1, [r0] + + ldr r0, =GFER1 + ldr r1, =CFG_GFER1_VAL + str r1, [r0] + + ldr r0, =GFER2 + ldr r1, =CFG_GFER2_VAL + str r1, [r0] + + ldr r0, =GFER3 + ldr r1, =CFG_GFER3_VAL + str r1, [r0] + + ldr r0, =GPDR0 + ldr r1, =CFG_GPDR0_VAL + str r1, [r0] + + ldr r0, =GPDR1 + ldr r1, =CFG_GPDR1_VAL + str r1, [r0] + + ldr r0, =GPDR2 + ldr r1, =CFG_GPDR2_VAL + str r1, [r0] + + ldr r0, =GPDR3 + ldr r1, =CFG_GPDR3_VAL + str r1, [r0] + + ldr r0, =GAFR0_L + ldr r1, =CFG_GAFR0_L_VAL + str r1, [r0] + + ldr r0, =GAFR0_U + ldr r1, =CFG_GAFR0_U_VAL + str r1, [r0] + + ldr r0, =GAFR1_L + ldr r1, =CFG_GAFR1_L_VAL + str r1, [r0] + + ldr r0, =GAFR1_U + ldr r1, =CFG_GAFR1_U_VAL + str r1, [r0] + + ldr r0, =GAFR2_L + ldr r1, =CFG_GAFR2_L_VAL + str r1, [r0] + + ldr r0, =GAFR2_U + ldr r1, =CFG_GAFR2_U_VAL + str r1, [r0] + + ldr r0, =GAFR3_L + ldr r1, =CFG_GAFR3_L_VAL + str r1, [r0] + + ldr r0, =GAFR3_U + ldr r1, =CFG_GAFR3_U_VAL + str r1, [r0] + + ldr r0, =PSSR /* enable GPIO pins */ + ldr r1, =CFG_PSSR_VAL + str r1, [r0] + + /* ---------------------------------------------------------------- */ + /* Enable memory interface */ + /* */ + /* The sequence below is based on the recommended init steps */ + /* detailed in the Intel PXA250 Operating Systems Developers Guide, */ + /* Chapter 10. */ + /* ---------------------------------------------------------------- */ + + /* ---------------------------------------------------------------- */ + /* Step 1: Wait for at least 200 microsedonds to allow internal */ + /* clocks to settle. Only necessary after hard reset... */ + /* FIXME: can be optimized later */ + /* ---------------------------------------------------------------- */ + + ldr r3, =OSCR /* reset the OS Timer Count to zero */ + mov r2, #0 + str r2, [r3] + ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ + /* so 0x300 should be plenty */ +1: + ldr r2, [r3] + cmp r4, r2 + bgt 1b + +mem_init: + + ldr r1, =MEMC_BASE /* get memory controller base addr. */ + + /* ---------------------------------------------------------------- */ + /* Step 2a: Initialize Asynchronous static memory controller */ + /* ---------------------------------------------------------------- */ + + /* MSC registers: timing, bus width, mem type */ + + /* MSC0: nCS(0,1) */ + ldr r2, =CFG_MSC0_VAL + str r2, [r1, #MSC0_OFFSET] + ldr r2, [r1, #MSC0_OFFSET] /* read back to ensure */ + /* that data latches */ + /* MSC1: nCS(2,3) */ + ldr r2, =CFG_MSC1_VAL + str r2, [r1, #MSC1_OFFSET] + ldr r2, [r1, #MSC1_OFFSET] + + /* MSC2: nCS(4,5) */ + ldr r2, =CFG_MSC2_VAL + str r2, [r1, #MSC2_OFFSET] + ldr r2, [r1, #MSC2_OFFSET] + + /* ---------------------------------------------------------------- */ + /* Step 2b: Initialize Card Interface */ + /* ---------------------------------------------------------------- */ + + /* MECR: Memory Expansion Card Register */ + ldr r2, =CFG_MECR_VAL + str r2, [r1, #MECR_OFFSET] + ldr r2, [r1, #MECR_OFFSET] + + /* MCMEM0: Card Interface slot 0 timing */ + ldr r2, =CFG_MCMEM0_VAL + str r2, [r1, #MCMEM0_OFFSET] + ldr r2, [r1, #MCMEM0_OFFSET] + + /* MCMEM1: Card Interface slot 1 timing */ + ldr r2, =CFG_MCMEM1_VAL + str r2, [r1, #MCMEM1_OFFSET] + ldr r2, [r1, #MCMEM1_OFFSET] + + /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ + ldr r2, =CFG_MCATT0_VAL + str r2, [r1, #MCATT0_OFFSET] + ldr r2, [r1, #MCATT0_OFFSET] + + /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ + ldr r2, =CFG_MCATT1_VAL + str r2, [r1, #MCATT1_OFFSET] + ldr r2, [r1, #MCATT1_OFFSET] + + /* MCIO0: Card Interface I/O Space Timing, slot 0 */ + ldr r2, =CFG_MCIO0_VAL + str r2, [r1, #MCIO0_OFFSET] + ldr r2, [r1, #MCIO0_OFFSET] + + /* MCIO1: Card Interface I/O Space Timing, slot 1 */ + ldr r2, =CFG_MCIO1_VAL + str r2, [r1, #MCIO1_OFFSET] + ldr r2, [r1, #MCIO1_OFFSET] + + /* ---------------------------------------------------------------- */ + /* Step 2c: Write FLYCNFG FIXME: what's that??? */ + /* ---------------------------------------------------------------- */ + ldr r2, =CFG_FLYCNFG_VAL + str r2, [r1, #FLYCNFG_OFFSET] + str r2, [r1, #FLYCNFG_OFFSET] + + /* ---------------------------------------------------------------- */ + /* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */ + /* ---------------------------------------------------------------- */ + + /* Before accessing MDREFR we need a valid DRI field, so we set */ + /* this to power on defaults + DRI field. */ + + ldr r4, [r1, #MDREFR_OFFSET] + ldr r2, =0xFFF + bic r4, r4, r2 + + ldr r3, =CFG_MDREFR_VAL + and r3, r3, r2 + + orr r4, r4, r3 + str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + + orr r4, r4, #MDREFR_K0RUN + orr r4, r4, #MDREFR_K0DB4 + orr r4, r4, #MDREFR_K0FREE + orr r4, r4, #MDREFR_K0DB2 + orr r4, r4, #MDREFR_K1DB2 + bic r4, r4, #MDREFR_K1FREE + bic r4, r4, #MDREFR_K2FREE + + str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + ldr r4, [r1, #MDREFR_OFFSET] + + /* Note: preserve the mdrefr value in r4 */ + + + /* ---------------------------------------------------------------- */ + /* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */ + /* ---------------------------------------------------------------- */ + + /* Initialize SXCNFG register. Assert the enable bits */ + + /* Write SXMRS to cause an MRS command to all enabled banks of */ + /* synchronous static memory. Note that SXLCR need not be written */ + /* at this time. */ + + ldr r2, =CFG_SXCNFG_VAL + str r2, [r1, #SXCNFG_OFFSET] + + /* ---------------------------------------------------------------- */ + /* Step 4: Initialize SDRAM */ + /* ---------------------------------------------------------------- */ + + bic r4, r4, #(MDREFR_K2FREE |MDREFR_K1FREE | MDREFR_K0FREE) + + orr r4, r4, #MDREFR_K1RUN + bic r4, r4, #MDREFR_K2DB2 + str r4, [r1, #MDREFR_OFFSET] + ldr r4, [r1, #MDREFR_OFFSET] + + bic r4, r4, #MDREFR_SLFRSH + str r4, [r1, #MDREFR_OFFSET] + ldr r4, [r1, #MDREFR_OFFSET] + + orr r4, r4, #MDREFR_E1PIN + str r4, [r1, #MDREFR_OFFSET] + ldr r4, [r1, #MDREFR_OFFSET] + + nop + nop + + + /* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to */ + /* configure but not enable each SDRAM partition pair. */ + + ldr r4, =CFG_MDCNFG_VAL + bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1) + bic r4, r4, #(MDCNFG_DE2|MDCNFG_DE3) + + str r4, [r1, #MDCNFG_OFFSET] /* write back MDCNFG */ + ldr r4, [r1, #MDCNFG_OFFSET] + + + /* Step 4e: Wait for the clock to the SDRAMs to stabilize, */ + /* 100..200 µsec. */ + + ldr r3, =OSCR /* reset the OS Timer Count to zero */ + mov r2, #0 + str r2, [r3] + ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ + /* so 0x300 should be plenty */ +1: + ldr r2, [r3] + cmp r4, r2 + bgt 1b + + + /* Step 4f: Trigger a number (usually 8) refresh cycles by */ + /* attempting non-burst read or write accesses to disabled */ + /* SDRAM, as commonly specified in the power up sequence */ + /* documented in SDRAM data sheets. The address(es) used */ + /* for this purpose must not be cacheable. */ + + ldr r3, =CFG_DRAM_BASE + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + + + /* Step 4g: Write MDCNFG with enable bits asserted */ + /* (MDCNFG:DEx set to 1). */ + + ldr r3, [r1, #MDCNFG_OFFSET] + mov r4, r3 + orr r3, r3, #MDCNFG_DE0 + str r3, [r1, #MDCNFG_OFFSET] + mov r0, r3 + + /* Step 4h: Write MDMRS. */ + + ldr r2, =CFG_MDMRS_VAL + str r2, [r1, #MDMRS_OFFSET] + + /* enable APD */ + ldr r3, [r1, #MDREFR_OFFSET] + orr r3, r3, #MDREFR_APD + str r3, [r1, #MDREFR_OFFSET] + + /* We are finished with Intel's memory controller initialisation */ + + +setvoltage: + + mov r10, lr + bl initPXAvoltage /* In case the board is rebooting with a */ + mov lr, r10 /* low voltage raise it up to a good one. */ + +#if 1 + b initirqs +#endif + +wakeup: + /* Are we waking from sleep? */ + ldr r0, =RCSR + ldr r1, [r0] + and r1, r1, #(RCSR_GPR | RCSR_SMR | RCSR_WDR | RCSR_HWR) + str r1, [r0] + teq r1, #RCSR_SMR + + bne initirqs + + ldr r0, =PSSR + mov r1, #PSSR_PH + str r1, [r0] + + /* if so, resume at PSPR */ + ldr r0, =PSPR + ldr r1, [r0] + mov pc, r1 + + /* ---------------------------------------------------------------- */ + /* Disable (mask) all interrupts at interrupt controller */ + /* ---------------------------------------------------------------- */ + +initirqs: + + mov r1, #0 /* clear int. level register (IRQ, not FIQ) */ + ldr r2, =ICLR + str r1, [r2] + + ldr r2, =ICMR /* mask all interrupts at the controller */ + str r1, [r2] + + /* ---------------------------------------------------------------- */ + /* Clock initialisation */ + /* ---------------------------------------------------------------- */ + +initclks: + + /* Disable the peripheral clocks, and set the core clock frequency */ + + /* Turn Off on-chip peripheral clocks (except for memory) */ + /* for re-configuration. */ + ldr r1, =CKEN + ldr r2, =CFG_CKEN + str r2, [r1] + + /* ... and write the core clock config register */ + ldr r2, =CFG_CCCR + ldr r1, =CCCR + str r2, [r1] + + /* Turn on turbo mode */ + mrc p14, 0, r2, c6, c0, 0 + orr r2, r2, #0xB /* Turbo, Fast-Bus, Freq change**/ + mcr p14, 0, r2, c6, c0, 0 + + /* Re-write MDREFR */ + ldr r1, =MEMC_BASE + ldr r2, [r1, #MDREFR_OFFSET] + str r2, [r1, #MDREFR_OFFSET] +#ifdef RTC + /* enable the 32Khz oscillator for RTC and PowerManager */ + ldr r1, =OSCC + mov r2, #OSCC_OON + str r2, [r1] + + /* NOTE: spin here until OSCC.OOK get set, meaning the PLL */ + /* has settled. */ +60: + ldr r2, [r1] + ands r2, r2, #1 + beq 60b +#else +#error "RTC not defined" +#endif + + /* Interrupt init: Mask all interrupts */ + ldr r0, =ICMR /* enable no sources */ + mov r1, #0 + str r1, [r0] + /* FIXME */ + +#ifdef NODEBUG + /*Disable software and data breakpoints */ + mov r0,#0 + mcr p15,0,r0,c14,c8,0 /* ibcr0 */ + mcr p15,0,r0,c14,c9,0 /* ibcr1 */ + mcr p15,0,r0,c14,c4,0 /* dbcon */ + + /*Enable all debug functionality */ + mov r0,#0x80000000 + mcr p14,0,r0,c10,c0,0 /* dcsr */ +#endif + + /* ---------------------------------------------------------------- */ + /* End lowlevel_init */ + /* ---------------------------------------------------------------- */ + +endlowlevel_init: + + mov pc, lr diff --git a/board/trizepsiv/pxavoltage.S b/board/trizepsiv/pxavoltage.S new file mode 100644 index 00000000000..5e411321f30 --- /dev/null +++ b/board/trizepsiv/pxavoltage.S @@ -0,0 +1,31 @@ +/* + * (C) Copyright 2007 + * Stefano Babic, DENX Gmbh, sbabic@denx.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + + + .global initPXAvoltage + +initPXAvoltage: + mov pc, lr + diff --git a/board/trizepsiv/u-boot.lds b/board/trizepsiv/u-boot.lds new file mode 100644 index 00000000000..f0102391b34 --- /dev/null +++ b/board/trizepsiv/u-boot.lds @@ -0,0 +1,56 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/pxa/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/drivers/dm9000x.c b/drivers/dm9000x.c index e0d531bd917..6131b5c3570 100644 --- a/drivers/dm9000x.c +++ b/drivers/dm9000x.c @@ -99,7 +99,7 @@ void eth_halt(void); static int dm9000_probe(void); static u16 phy_read(int); static void phy_write(int, u16); -static u16 read_srom_word(int); +u16 read_srom_word(int); static u8 DM9000_ior(int); static void DM9000_iow(int reg, u8 value); @@ -537,7 +537,7 @@ eth_rx(void) /* Read a word data from SROM */ -static u16 +u16 read_srom_word(int offset) { DM9000_iow(DM9000_EPAR, offset); @@ -547,6 +547,18 @@ read_srom_word(int offset) return (DM9000_ior(DM9000_EPDRL) + (DM9000_ior(DM9000_EPDRH) << 8)); } +void +write_srom_word(int offset, u16 val) +{ + DM9000_iow(DM9000_EPAR, offset); + DM9000_iow(DM9000_EPDRH, ((val >> 8) & 0xff)); + DM9000_iow(DM9000_EPDRL, (val & 0xff)); + DM9000_iow(DM9000_EPCR, 0x12); + udelay(8000); + DM9000_iow(DM9000_EPCR, 0); +} + + /* Read a byte from I/O port */ diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h new file mode 100644 index 00000000000..84998d4392a --- /dev/null +++ b/include/configs/trizepsiv.h @@ -0,0 +1,325 @@ +/* + * (C) Copyright 2007 + * Stefano Babic, DENX Gmbh, sbabic@denx.de + * + * (C) Copyright 2004 + * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net + * + * (C) Copyright 2002 + * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH + * Marius Groeger + * + * Configuation settings for the LUBBOCK board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_PXA27X 1 /* This is an PXA27x CPU */ + +#define LITTLEENDIAN 1 /* used by usb_ohci.c */ + +#define CONFIG_MMC 1 +#define BOARD_LATE_INIT 1 + +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +#define RTC + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* + * Hardware drivers + */ + +/* + * select serial console configuration + */ +#define CONFIG_SERIAL_MULTI +#define CONFIG_FFUART 1 /* we use FFUART on Conxs */ +#define CONFIG_BTUART 1 /* we use BTUART on Conxs */ +#define CONFIG_STUART 1 /* we use STUART on Conxs */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 38400 + +#define CONFIG_DOS_PARTITION 1 + +/* + * Command line configuration. + */ +#include + +#define CONFIG_CMD_MMC +#define CONFIG_CMD_FAT +#define CONFIG_CMD_IMLS +#define CONFIG_CMD_PING +#define CONFIG_CMD_USB + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ + +#undef CONFIG_SHOW_BOOT_PROGRESS + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_SERVERIP 192.168.1.99 +#define CONFIG_BOOTCOMMAND "run boot_flash" +#define CONFIG_BOOTARGS "console=ttyS0,38400 ramdisk_size=12288"\ + " rw root=/dev/ram initrd=0xa0800000,5m" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "program_boot_mmc=" \ + "mw.b 0xa0010000 0xff 0x20000; " \ + "if mmcinit && " \ + "fatload mmc 0 0xa0010000 u-boot.bin; " \ + "then " \ + "protect off 0x0 0x1ffff; " \ + "erase 0x0 0x1ffff; " \ + "cp.b 0xa0010000 0x0 0x20000; " \ + "fi\0" \ + "program_uzImage_mmc=" \ + "mw.b 0xa0010000 0xff 0x180000; " \ + "if mmcinit && " \ + "fatload mmc 0 0xa0010000 uzImage; " \ + "then " \ + "protect off 0x40000 0x1bffff; " \ + "erase 0x40000 0x1bffff; " \ + "cp.b 0xa0010000 0x40000 0x180000; " \ + "fi\0" \ + "program_ramdisk_mmc=" \ + "mw.b 0xa0010000 0xff 0x500000; " \ + "if mmcinit && " \ + "fatload mmc 0 0xa0010000 ramdisk.gz; " \ + "then " \ + "protect off 0x1c0000 0x6bffff; " \ + "erase 0x1c0000 0x6bffff; " \ + "cp.b 0xa0010000 0x1c0000 0x500000; " \ + "fi\0" \ + "boot_mmc=" \ + "if mmcinit && " \ + "fatload mmc 0 0xa0030000 uzImage && " \ + "fatload mmc 0 0xa0800000 ramdisk.gz; " \ + "then " \ + "bootm 0xa0030000; " \ + "fi\0" \ + "boot_flash=" \ + "cp.b 0x1c0000 0xa0800000 0x500000; " \ + "bootm 0x40000\0" \ + +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +/* #define CONFIG_INITRD_TAG 1 */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_HUSH_PARSER 1 +#define CFG_PROMPT_HUSH_PS2 "> " + +#define CFG_LONGHELP /* undef to save memory */ +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT "$ " /* Monitor Command Prompt */ +#else +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#endif +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_DEVICE_NULLDEV 1 + +#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0xa1000000 /* default load address */ + +#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ +#define CFG_CPUSPEED 0x207 /* need to look more closely, I think this is Turbo = 2x, L=91Mhz */ + + /* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CFG_MMC_BASE 0xF0000000 + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ +#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ +#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ +#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ +#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ +#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ +#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ +#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ + +#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ + +#define CFG_DRAM_BASE 0xa0000000 +#define CFG_DRAM_SIZE 0x04000000 + +#define CFG_FLASH_BASE PHYS_FLASH_1 + +/* + * GPIO settings + */ +#define CFG_GPSR0_VAL 0x00018000 +#define CFG_GPSR1_VAL 0x00000000 +#define CFG_GPSR2_VAL 0x400dc000 +#define CFG_GPSR3_VAL 0x00000000 +#define CFG_GPCR0_VAL 0x00000000 +#define CFG_GPCR1_VAL 0x00000000 +#define CFG_GPCR2_VAL 0x00000000 +#define CFG_GPCR3_VAL 0x00000000 +#define CFG_GPDR0_VAL 0x00018000 +#define CFG_GPDR1_VAL 0x00028801 +#define CFG_GPDR2_VAL 0x520dc000 +#define CFG_GPDR3_VAL 0x0001E000 +#define CFG_GAFR0_L_VAL 0x801c0000 +#define CFG_GAFR0_U_VAL 0x00000013 +#define CFG_GAFR1_L_VAL 0x6990100A +#define CFG_GAFR1_U_VAL 0x00000008 +#define CFG_GAFR2_L_VAL 0xA0000000 +#define CFG_GAFR2_U_VAL 0x010900F2 +#define CFG_GAFR3_L_VAL 0x54000003 +#define CFG_GAFR3_U_VAL 0x00002401 +#define CFG_GRER0_VAL 0x00000000 +#define CFG_GRER1_VAL 0x00000000 +#define CFG_GRER2_VAL 0x00000000 +#define CFG_GRER3_VAL 0x00000000 +#define CFG_GFER0_VAL 0x00000000 +#define CFG_GFER1_VAL 0x00000000 +#define CFG_GFER2_VAL 0x00000000 +#define CFG_GFER3_VAL 0x00000020 + + +#define CFG_PSSR_VAL 0x20 /* CHECK */ + +/* + * Clock settings + */ +#define CFG_CKEN 0x01FFFFFF /* CHECK */ +#define CFG_CCCR 0x02000290 /* 520Mhz */ + +/* + * Memory settings + */ + +#define CFG_MSC0_VAL 0x4df84df0 +#define CFG_MSC1_VAL 0x7ff87ff4 +#define CFG_MSC2_VAL 0xa26936d4 +#define CFG_MDCNFG_VAL 0x880009C9 +#define CFG_MDREFR_VAL 0x20ca201e +#define CFG_MDMRS_VAL 0x00220022 + +#define CFG_FLYCNFG_VAL 0x00000000 +#define CFG_SXCNFG_VAL 0x40044004 + +/* + * PCMCIA and CF Interfaces + */ +#define CFG_MECR_VAL 0x00000001 +#define CFG_MCMEM0_VAL 0x00004204 +#define CFG_MCMEM1_VAL 0x00010204 +#define CFG_MCATT0_VAL 0x00010504 +#define CFG_MCATT1_VAL 0x00010504 +#define CFG_MCIO0_VAL 0x00008407 +#define CFG_MCIO1_VAL 0x0000c108 + +#define CONFIG_DRIVER_DM9000 1 +#define CONFIG_DRIVER_DM9000 1 +#define CONFIG_DM9000_BASE 0x08000000 +#define DM9000_IO CONFIG_DM9000_BASE +#define DM9000_DATA (CONFIG_DM9000_BASE+0x8004) +/* #define CONFIG_DM9000_USE_8BIT */ +/* #define CONFIG_DM9000_USE_16BIT */ +#define CONFIG_DM9000_USE_32BIT + +#define CONFIG_USB_OHCI_NEW 1 +#define CFG_USB_OHCI_BOARD_INIT 1 +#define CFG_USB_OHCI_MAX_ROOT_PORTS 3 +#define CFG_USB_OHCI_REGS_BASE 0x4C000000 +#define CFG_USB_OHCI_SLOT_NAME "trizepsiv" +#define CONFIG_USB_STORAGE 1 +#define CFG_USB_OHCI_CPU_INIT 1 + +/* + * FLASH and environment organization + */ + +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER 1 + +#define CFG_MONITOR_BASE 0 +#define CFG_MONITOR_LEN 0x40000 + +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 4 + 255 /* max number of sectors on one chip */ + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */ + +/* write flash less slowly */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 + +/* Flash environment locations */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR (PHYS_FLASH_1 + CFG_MONITOR_LEN) /* Addr of Environment Sector */ +#define CFG_ENV_SIZE 0x40000 /* Total Size of Environment */ +#define CFG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR+CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +#endif /* __CONFIG_H */ -- cgit v1.3.1 From 754bac48156f8958d8f6a53a51eda88ab5758929 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Mon, 10 Sep 2007 20:42:31 +0200 Subject: Update version to match current state. Signed-off-by: Wolfgang Denk --- Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Makefile') diff --git a/Makefile b/Makefile index 0371d4619d4..c1c64462f03 100644 --- a/Makefile +++ b/Makefile @@ -22,9 +22,9 @@ # VERSION = 1 -PATCHLEVEL = 2 +PATCHLEVEL = 3 SUBLEVEL = 0 -EXTRAVERSION = +EXTRAVERSION = -rc1 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) VERSION_FILE = $(obj)include/version_autogenerated.h -- cgit v1.3.1 From e21659e30660a1377c42af135a6114efe39801d9 Mon Sep 17 00:00:00 2001 From: Sam Sparks Date: Fri, 14 Sep 2007 11:14:42 -0600 Subject: Update MPC8349ITX*_config to place config.tmp in right place. MPC834ITX*_config does not store config.tmp at the correct locatation, causing MPC8349ITXGP to have the wrong TEXT_BASE. Signed-off-by: Sam Sparks Signed-off-by: Grant Likely --- Makefile | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'Makefile') diff --git a/Makefile b/Makefile index c1c64462f03..85885b166a6 100644 --- a/Makefile +++ b/Makefile @@ -1794,13 +1794,13 @@ MPC8349ITX_config \ MPC8349ITX_LOWBOOT_config \ MPC8349ITXGP_config: unconfig @mkdir -p $(obj)include - @mkdir -p $(obj)board/mpc8349itx + @mkdir -p $(obj)board/freescale/mpc8349itx @echo "#define CONFIG_$(subst _LOWBOOT,,$(@:_config=))" >> $(obj)include/config.h @if [ "$(findstring GP,$@)" ] ; then \ - echo "TEXT_BASE = 0xFE000000" >$(obj)board/mpc8349itx/config.tmp ; \ + echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \ fi @if [ "$(findstring LOWBOOT,$@)" ] ; then \ - echo "TEXT_BASE = 0xFE000000" >$(obj)board/mpc8349itx/config.tmp ; \ + echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \ fi @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx freescale -- cgit v1.3.1 From f8d3ca7b6fa322ac57e8e831f07dbeea039a9f35 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Tue, 18 Sep 2007 17:40:27 +0200 Subject: MCC200: fix build warning The MCC200 board config file includes version.h for some customer- specific setting, which causes warnings with "make depend"; build version.h before depend. Signed-off-by: Wolfgang Denk --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Makefile') diff --git a/Makefile b/Makefile index 85885b166a6..011f730e3ae 100644 --- a/Makefile +++ b/Makefile @@ -319,7 +319,7 @@ updater: env: $(MAKE) -C tools/env all || exit 1 -depend dep: +depend dep: version for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done tags ctags: -- cgit v1.3.1 From 8a783a65851bc7421ab69f442261215e21b8891a Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Tue, 18 Sep 2007 12:24:57 -0600 Subject: Bugfix: remove embedded null (\0) from CFG_BOOTFILE macro in TQM8540_config /bin/bash and /bin/dash (which /bin/sh is linked to on ubuntu) handle embedded nulls in a string differently. For example, the following statement: echo "this is a string\0" > afile Will produce the following with /bin/bash: "this is a string\0" But with /bin/dash, will produce: "this is a string Bug fixed by moving the embedded null out of the makefile and into the config header. Also renamed the macro to avoid usage colision with the same macro used by other board ports. Signed-off-by: Grant Likely --- Makefile | 2 +- include/configs/TQM85xx.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'Makefile') diff --git a/Makefile b/Makefile index 85885b166a6..a87311ca1f9 100644 --- a/Makefile +++ b/Makefile @@ -1961,7 +1961,7 @@ TQM8560_config: unconfig echo "#define CONFIG_TQM$${CTYPE}">>$(obj)include/config.h; \ echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \ echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h; \ - echo "#define CFG_BOOTFILE \"bootfile=/tftpboot/tqm$${CTYPE}/uImage\0\"">>$(obj)include/config.h + echo "#define CFG_BOOTFILE_PATH \"/tftpboot/tqm$${CTYPE}/uImage\"">>$(obj)include/config.h @$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx ######################################################################### diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index 2f23c504930..6dbd3924bdd 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -449,7 +449,7 @@ #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ #define CONFIG_EXTRA_ENV_SETTINGS \ - CFG_BOOTFILE \ + "bootfile="CFG_BOOTFILE_PATH"\0" \ "netdev=eth0\0" \ "consdev=ttyS0\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ -- cgit v1.3.1 From 66dcad3a9a53e0766d90e0084123bd8529522fb0 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Thu, 20 Sep 2007 00:04:14 +0200 Subject: v1.3.0-rc2 Signed-off-by: Wolfgang Denk --- CHANGELOG | 366 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Makefile | 2 +- 2 files changed, 367 insertions(+), 1 deletion(-) (limited to 'Makefile') diff --git a/CHANGELOG b/CHANGELOG index 671c836b79b..82b3145357d 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,369 @@ +commit 135e19bc2773ebca487e9a8371f67e1ba202313a +Author: Wolfgang Denk +Date: Tue Sep 18 21:36:35 2007 +0200 + + Avoid compiler warning. + + Signed-off-by: Wolfgang Denk + +commit 8a783a65851bc7421ab69f442261215e21b8891a +Author: Grant Likely +Date: Tue Sep 18 12:24:57 2007 -0600 + + Bugfix: remove embedded null (\0) from CFG_BOOTFILE macro in TQM8540_config + + /bin/bash and /bin/dash (which /bin/sh is linked to on ubuntu) handle embedded + nulls in a string differently. For example, the following statement: + echo "this is a string\0" > afile + Will produce the following with /bin/bash: + "this is a string\0" + But with /bin/dash, will produce: + "this is a string + + Bug fixed by moving the embedded null out of the makefile and into the + config header. Also renamed the macro to avoid usage colision with the same + macro used by other board ports. + + Signed-off-by: Grant Likely + +commit f8d3ca7b6fa322ac57e8e831f07dbeea039a9f35 +Author: Wolfgang Denk +Date: Tue Sep 18 17:40:27 2007 +0200 + + MCC200: fix build warning + + The MCC200 board config file includes version.h for some customer- + specific setting, which causes warnings with "make depend"; build + version.h before depend. + + Signed-off-by: Wolfgang Denk + +commit 67c31036acaaaa992fc346cc89db0909a7e733c4 +Author: Wolfgang Denk +Date: Sun Sep 16 17:10:04 2007 +0200 + + TQM8xx[LM]: Fix broken environment alignment. + + With recent toolchains, the environment sectors were no longer aligned to + sector boundaries. The reason was a combination of two bugs: + + 1) common/environment.c assumed that CONFIG_TQM8xxL would be defined + for all TQM8xxL and TQM8xxM boards. But "include/common.h", where + this gets defined, is not included here (and cannot be included + without causing lots of problems). + + Added a new #define CFG_USE_PPCENV for all boards which really + want to put the environment is a ".ppcenv" section. + + 2) The linker scripts just include environment.o, silently assuming + that the objects in that file are really in the order in which + they are coded in the C file, i. e. "environment" first, then + "redundand_environment", and "env_size" last. However, current + toolchains (GCC-4.x) reorder the objects, causing the environment + data not to start on a flash sector boundary: + + Instead of: we got: + + 40008000 T environment 40008000 T env_size + 4000c000 T redundand_environment 40008004 T redundand_environment + 40010000 T env_size 4000c004 T environment + + Note: this patch fixes just the first part, and cures the alignment + problem by making sure that "env_size" gets placed correctly. However, + we still have a potential issue because primary and redundant + environment sectors are actually swapped, i. e. we have now: + + 40008000 T redundand_environment + 4000c000 T environment + 40010000 T env_size + + This shall be fixed in the next version. + + Signed-off-by: Wolfgang Denk + +commit eb6da8050797c204c9d010548424186c7ce32fc1 +Author: Wolfgang Denk +Date: Sun Sep 16 02:39:35 2007 +0200 + + TQM8xx/FPS8xx: adjust flash partitions for 2.6 ARCH=powerpc kernels + + Signed-off-by: Wolfgang Denk + +commit cd2d1602c54cc6957bdef3872272a4b264893960 +Author: urwithsughosh@gmail.com +Date: Mon Sep 10 14:54:56 2007 -0400 + + Typo fix in tsec.c + + Fixup for the break statement in wrong place. + + [Patch by urwithsughosh@gmail.com] + Acked-by: Andy Fleming + Signed-off-by: Wolfgang Denk + +commit 5bd7fe9aeb76906371f40b8fd07613f10922e3e7 +Author: Matthias Fuchs +Date: Tue Sep 11 17:04:00 2007 +0200 + + Fix do_div() usage in nand process output + + Fix usage of do_div() in nand erase|read|write process output. + + The last patch to nand_util.c introduced do_div() instead of libgcc's + implementation. But do_div() returns the quotient in its first + macro parameter and not as result. + + Signed-off-by: Matthias Fuchs + +commit c750d2e6692a000a82f29de7bf24e3dc21239161 +Author: Matthias Fuchs +Date: Wed Sep 12 12:36:53 2007 +0200 + + NAND: Add CFG_NAND_QUIET option + + This config option sets the default for the progress information + output behavior that can also be configured through the 'quiet' + environment variable. + + The legacy NAND code does not print the current progress info + on the console. So this option is for backward compatibility for + units that are in the field and where setting the quiet variable + is not an option. With CFG_NAND_QUIET set to '1' the console + progress info is turned off. This can still be overwritten + through the environment variable. + + Signed-off-by: Matthias Fuchs + +commit dcb88630290d2bcd803386dd4c2be73142994c4f +Author: Liew Tsi Chung-r5aahp +Date: Thu Sep 13 16:06:05 2007 -0700 + + ColdFire: fix build error becasue of bad type of mii_init() + + Signed-off-by: TsiChungLiew + +commit 314d5b6ce52a4ed19dd295d1364e246c5e605017 +Author: Liew Tsi Chung-r5aahp +Date: Thu Sep 13 16:04:05 2007 -0700 + + ColdFire: Fix build error caused by pixis.c + + Moved the #include inside the #ifdef CONFIG_FSL_PIXIS. + + Signed-off-by: TsiChungLiew + +commit e21659e30660a1377c42af135a6114efe39801d9 +Author: Sam Sparks +Date: Fri Sep 14 11:14:42 2007 -0600 + + Update MPC8349ITX*_config to place config.tmp in right place. + + MPC834ITX*_config does not store config.tmp at the correct locatation, + causing MPC8349ITXGP to have the wrong TEXT_BASE. + + Signed-off-by: Sam Sparks + Signed-off-by: Grant Likely + +commit 1218abf1b5817a39a82399b4b928b00750575bda +Author: Wolfgang Denk +Date: Sat Sep 15 20:48:41 2007 +0200 + + Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as global + + Signed-off-by: Wolfgang Denk + +commit 66b3f24d665be678a9dbb125b1e84185400f63b5 +Author: Dirk Behme +Date: Sat Sep 15 11:55:42 2007 +0200 + + Make DECLARE_GLOBAL_DATA_PTR global for DaVinci + + As discussed in [1], DECLARE_GLOBAL_DATA_PTR has to be global and not + function local. + + Signed-off-by: Dirk Behme + + [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805 + +commit 6e7b7b6ea1b6d04dbe96242eb6a0c1c664c98e8c +Author: Bartlomiej Sieka +Date: Thu Sep 13 18:21:48 2007 +0200 + + cm5200: Fix a typo introduced by afaac86fe2948ac84cd9a12bbed883b3c683e7d9 + + Signed-off-by: Marian Balakowicz + +commit f34024d4a328e6edd906456da98d2c537155c4f7 +Author: Wolfgang Denk +Date: Wed Sep 12 00:48:57 2007 +0200 + + Fix memory corruption problem on STX GP3 SSA Board. + + Signed-off-by: Wolfgang Denk + +commit 38ad82da0c1180ecdeb212a8f4245e945bcc546e +Author: Grzegorz Bernacki +Date: Tue Sep 11 15:42:11 2007 +0200 + + [GP3SSA] Add define CONFIG_MPC85XX_PCI2 in config file to allow u-boot to + scan on second pci bus. + + Signed-off-by: Grzegorz Bernacki + +commit 6c2f4f388e8181655ea8b69343ea00b68aa6e8d0 +Author: Grzegorz Bernacki +Date: Tue Sep 11 12:57:52 2007 +0200 + + [ppc4xx] Individual handling of sdram.c for bamboo_nand build + + Bamboo has a file sdram.c which needs special treatment when building in + separate directory. It has to be linked to build directory otherwise it is + not seen. + + Signed-off-by: Grzegorz Bernacki + +commit 38c1ef728d19950414a8ab1ccfc53767848fa346 +Author: Sean MCGOOGAN +Date: Mon Sep 10 16:55:59 2007 +0100 + + Allocate CPU Architecture Code for STMicroelectronics' ST200. + + Signed-off-by: Sean McGoogan + --------------------------------------------------- + +commit 754bac48156f8958d8f6a53a51eda88ab5758929 +Author: Wolfgang Denk +Date: Mon Sep 10 20:42:31 2007 +0200 + + Update version to match current state. + + Signed-off-by: Wolfgang Denk + +commit 7a888d6b3c32a126dbb504ef146bb4c26574ca7b +Author: Grzegorz Bernacki +Date: Mon Sep 10 17:39:08 2007 +0200 + + [MPC512x] Streamline frame handling in the FEC driver + + - convert frame size settings to be derived from a single base + - set frame size to the recommended default value + + Signed-off-by: Grzegorz Bernacki + +commit e251e00d0db4b36d1d2b7e38fec43a7296b529a2 +Author: Kyungmin Park +Date: Mon Sep 10 11:34:00 2007 +0900 + + Remove compiler warning: target CPU does not support interworking + + Signed-off-by: Kyungmin Park + +commit 1d9e31e04911a6bb7cc66dd91132c699101c32e2 +Author: Wolfgang Denk +Date: Sun Sep 9 21:21:33 2007 +0200 + + Fix compile error in spc1920 config. + + Signed-off-by: Markus Klotzbücher + Signed-off-by: Wolfgang Denk + +commit a7d7eca791a37f452c9da10fef4b31dd7aa9a622 +Author: Grant Likely +Date: Fri Sep 7 09:25:07 2007 -0600 + + Bugfix: make bootm+libfdt compile on boards with no flash + + Signed-off-by: Grant Likely + +commit 6efc1fc0b63e55f94c5bc61d8dd23c918e3bc778 +Author: Grzegorz Bernacki +Date: Fri Sep 7 18:35:37 2007 +0200 + + [PPC440SPe] PCIe environment settings for Katmai and Yucca + + - 'pciconfighost' is set by default in order to be able to scan bridges + behind the primary host/PCIe + + - 'pciscandelay' env variable is recognized to allow for user-controlled + delay before the PCIe bus enumeration; some peripheral devices require a + significant delay before they can be scanned (e.g. LSI8408E); without the + delay they are not detected + + Signed-off-by: Grzegorz Bernacki + +commit 7f1913938984ef6c6a46cb53e003719196d9c5de +Author: Grzegorz Bernacki +Date: Fri Sep 7 18:20:23 2007 +0200 + + [PPC440SPe] Improve PCIe configuration space access + + - correct configuration space mapping + - correct bus numbering + - better access to config space + + Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the + first device on the first bus. We now allow to configure up to 16 buses; + also, scanning for devices behind the PCIe-PCIe bridge is supported, so + peripheral devices farther in hierarchy can be identified. + + Signed-off-by: Grzegorz Bernacki + +commit 15ee4734e4e08003d73d9ead3ca80e2a0672e427 +Author: Grzegorz Bernacki +Date: Fri Sep 7 17:46:18 2007 +0200 + + [PPC440SPe] Convert machine check exceptions handling + + Convert using fixup mechanism to suppressing MCK for the duration of config + read/write transaction: while fixups work fine with the case of a precise + exception, we identified a major drawback with this approach when there's + an imprecise case. In this scenario there is the following race condition: + the fixup is (by design) set to catch the instruction following the one + actually causing the exception; if an interrupt (e.g. decrementer) happens + between those two instructions, the ISR code is executed before the fixup + handler the machine check is no longer protected by the fixup handler as it + appears as within the ISR code. In consequence the fixup approach is being + phased out and replaced with explicit suppressing of MCK during a PCIe + config read/write cycle. + + Signed-off-by: Grzegorz Bernacki + +commit ff7640c9ead8806b5d827f2b29f9cb2632add729 +Author: Wolfgang Denk +Date: Fri Sep 7 17:43:36 2007 +0200 + + Fix typo in MAKEALL script. + + Signed-off-by: Wolfgang Denk + +commit 08e2e5fcd2e06670b62e1680a3934c0e55c72810 +Author: Grzegorz Bernacki +Date: Fri Sep 7 17:09:21 2007 +0200 + + [MPC512x] Proper handling of larger frames in the FEC driver + + When frame larger than local RX buffer is received, it is split and handled + by two buffer descriptors. Prior to this patch the FEC driver discarded + contents of a buffer descriptor without the 'LAST' bit set, so the first + part of the frame was lost in case of larger frames. This fix allows to + safely combine the two pieces into the whole frame. + + Signed-off-by: Grzegorz Bernacki + +commit 8d17979d0359492a822a0a409d26e3a3549b4cd4 +Author: Rafal Jaworowski +Date: Fri Sep 7 17:05:36 2007 +0200 + + [MPC512x] Correct fixup relocation + + Signed-off-by: Rafal Jaworowski + +commit a89cbbd27a60e6740772000fd0688ffba1c2576a +Author: Wolfgang Denk +Date: Fri Sep 7 01:21:25 2007 +0200 + + Update CHANGELOG, minor coding style cleanup. + commit 5e5803e119de3bebd76fc9a57baac0b5aeccc8a3 Author: stefano babic Date: Thu Aug 30 23:01:49 2007 +0200 diff --git a/Makefile b/Makefile index e74ff361330..8d500f53495 100644 --- a/Makefile +++ b/Makefile @@ -24,7 +24,7 @@ VERSION = 1 PATCHLEVEL = 3 SUBLEVEL = 0 -EXTRAVERSION = -rc1 +EXTRAVERSION = -rc2 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) VERSION_FILE = $(obj)include/version_autogenerated.h -- cgit v1.3.1