From e49631afa074e2cb8ea5baddbbe8b9483a491e32 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Wed, 12 Nov 2014 11:57:33 +0100 Subject: arm: am33xx: Handle NAND+I2C boot-device the same way as NAND Re-map NAND&I2C boot-device to the "normal" NAND boot-device. Otherwise the SPL boot IF can't handle this device correctly. Somehow booting with Hynix 4GBit NAND H27U4G8 on Siemens Draco leads to this boot-device passed to SPL from the BootROM. With this change, Draco boots just fine into main U-Boot. Signed-off-by: Stefan Roese Cc: Tom Rini Cc: Roger Meier Cc: Samuel Egli --- arch/arm/include/asm/arch-am33xx/spl.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/include') diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h index 8543f4399c8..e756418a59d 100644 --- a/arch/arm/include/asm/arch-am33xx/spl.h +++ b/arch/arm/include/asm/arch-am33xx/spl.h @@ -25,6 +25,7 @@ #else #define BOOT_DEVICE_XIP 2 #define BOOT_DEVICE_NAND 5 +#define BOOT_DEVICE_NAND_I2C 6 #if defined(CONFIG_AM33XX) #define BOOT_DEVICE_MMC1 8 #define BOOT_DEVICE_MMC2 9 /* eMMC or daughter card */ -- cgit v1.2.3