From da880bf7c18041e598def664c641705208359dfa Mon Sep 17 00:00:00 2001 From: Tomasz Maciej Nowak Date: Thu, 30 Mar 2023 20:24:22 +0200 Subject: ARM: dts: trimslice: sync SPI node with Linux dts After "spi: spi_flash_probe_bus_cs() rely on DT for spi speed and mode" series flash speed and mode wasn't passed to driver anymore, which resulted in: Loading Environment from SPIFlash... tegra20_sflash spi@7000c380: Invalid chip select 0:0 (err=-19) *** Warning - spi_flash_probe_bus_cs() failed, using default environment Fix it by syncing SPI node of affected device dts with Linux kernel dts. The changed SPI bus frequency doesn't influence stability of read/write operations. Ref: https://patchwork.ozlabs.org/project/uboot/cover/20220518064648.1843664-1-patrice.chotard@foss.st.com Signed-off-by: Tomasz Maciej Nowak Signed-off-by: Tom --- arch/arm/dts/tegra20-trimslice.dts | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/dts/tegra20-trimslice.dts b/arch/arm/dts/tegra20-trimslice.dts index e19001ee2bd..fa942d26078 100644 --- a/arch/arm/dts/tegra20-trimslice.dts +++ b/arch/arm/dts/tegra20-trimslice.dts @@ -27,7 +27,13 @@ spi@7000c380 { status = "okay"; - spi-max-frequency = <25000000>; + spi-max-frequency = <48000000>; + + flash@0 { + compatible = "winbond,w25q80bl", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <48000000>; + }; }; pcie@80003000 { -- cgit v1.2.3 From d83721f1d4a18f576e66264ac5a1812b9a82f008 Mon Sep 17 00:00:00 2001 From: Svyatoslav Ryhel Date: Fri, 30 Jun 2023 10:29:02 +0300 Subject: ARM: tegra: add SoC UID calculation function This is a small tool for calculation of SoC UID based on the same Linux function. It can be further used for generation of device unique data like mac address or exposing it as serial number. Tested-by: Andreas Westman Dorcsak # ASUS Grouper E1565 Tested-by: Svyatoslav Ryhel # LG P895 T30 Signed-off-by: Svyatoslav Ryhel Signed-off-by: Thierry Reding --- arch/arm/include/asm/arch-tegra/fuse.h | 7 ++ arch/arm/mach-tegra/Makefile | 4 + arch/arm/mach-tegra/fuse.c | 151 +++++++++++++++++++++++++++++++++ 3 files changed, 162 insertions(+) create mode 100644 arch/arm/mach-tegra/fuse.c (limited to 'arch') diff --git a/arch/arm/include/asm/arch-tegra/fuse.h b/arch/arm/include/asm/arch-tegra/fuse.h index 5b8e0bd8d16..f3f2ad8e3f2 100644 --- a/arch/arm/include/asm/arch-tegra/fuse.h +++ b/arch/arm/include/asm/arch-tegra/fuse.h @@ -19,4 +19,11 @@ struct fuse_regs { u32 security_mode; /* 0x1A0: FUSE_SECURITY_MODE */ }; +/** + * Calculate SoC UID + * + * Return: uid if ok, 0 on error + */ +unsigned long long tegra_chip_uid(void); + #endif /* ifndef _FUSE_H_ */ diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index 9147050b323..a5733b0bf6b 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -32,6 +32,10 @@ endif obj-$(CONFIG_DISPLAY_CPUINFO) += sys_info.o obj-y += pmc.o +ifndef CONFIG_TEGRA186 +obj-y += fuse.o +endif + obj-$(CONFIG_TEGRA20) += tegra20/ obj-$(CONFIG_TEGRA30) += tegra30/ obj-$(CONFIG_TEGRA114) += tegra114/ diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c new file mode 100644 index 00000000000..83bd5055384 --- /dev/null +++ b/arch/arm/mach-tegra/fuse.c @@ -0,0 +1,151 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2012-2013 + * NVIDIA Corporation + * + * (C) Copyright 2022 + * Svyatoslav Ryhel + */ + +#include +#include +#include + +#include +#include +#include +#include + +#include "cpu.h" + +#define FUSE_UID_LOW 0x108 +#define FUSE_UID_HIGH 0x10c + +#define FUSE_VENDOR_CODE 0x200 +#define FUSE_FAB_CODE 0x204 +#define FUSE_LOT_CODE_0 0x208 +#define FUSE_LOT_CODE_1 0x20c +#define FUSE_WAFER_ID 0x210 +#define FUSE_X_COORDINATE 0x214 +#define FUSE_Y_COORDINATE 0x218 + +#define FUSE_VENDOR_CODE_MASK 0xf +#define FUSE_FAB_CODE_MASK 0x3f +#define FUSE_WAFER_ID_MASK 0x3f +#define FUSE_X_COORDINATE_MASK 0x1ff +#define FUSE_Y_COORDINATE_MASK 0x1ff + +static u32 tegra_fuse_readl(unsigned long offset) +{ + return readl(NV_PA_FUSE_BASE + offset); +} + +static void tegra_fuse_init(void) +{ + u32 reg; + + /* + * Performed by downstream and is not + * documented by TRM. Whithout setting + * this bit fuse region will not work. + */ + reg = readl_relaxed(NV_PA_CLK_RST_BASE + 0x48); + reg |= BIT(28); + writel(reg, NV_PA_CLK_RST_BASE + 0x48); + + clock_enable(PERIPH_ID_FUSE); + udelay(2); + reset_set_enable(PERIPH_ID_FUSE, 0); +} + +unsigned long long tegra_chip_uid(void) +{ + u64 uid = 0ull; + u32 reg; + u32 cid; + u32 vendor; + u32 fab; + u32 lot; + u32 wafer; + u32 x; + u32 y; + u32 i; + + tegra_fuse_init(); + + /* This used to be so much easier in prior chips. Unfortunately, there + is no one-stop shopping for the unique id anymore. It must be + constructed from various bits of information burned into the fuses + during the manufacturing process. The 64-bit unique id is formed + by concatenating several bit fields. The notation used for the + various fields is with the UID composed + thusly: + + Where: + Field Bits Position Data + ------- ---- -------- ---------------------------------------- + CID 4 60 Chip id + VENDOR 4 56 Vendor code + FAB 6 50 FAB code + LOT 26 24 Lot code (5-digit base-36-coded-decimal, + re-encoded to 26 bits binary) + WAFER 6 18 Wafer id + X 9 9 Wafer X-coordinate + Y 9 0 Wafer Y-coordinate + ------- ---- + Total 64 + */ + + switch (tegra_get_chip()) { + case CHIPID_TEGRA20: + /* T20 has simple calculation */ + return ((unsigned long long)tegra_fuse_readl(FUSE_UID_HIGH) << 32ull) | + (unsigned long long)tegra_fuse_readl(FUSE_UID_LOW); + case CHIPID_TEGRA30: + /* T30 chip id is 0 */ + cid = 0; + break; + case CHIPID_TEGRA114: + /* T11x chip id is 1 */ + cid = 1; + break; + case CHIPID_TEGRA124: + /* T12x chip id is 3 */ + cid = 3; + break; + case CHIPID_TEGRA210: + /* T210 chip id is 5 */ + cid = 5; + default: + return 0; + } + + vendor = tegra_fuse_readl(FUSE_VENDOR_CODE) & FUSE_VENDOR_CODE_MASK; + fab = tegra_fuse_readl(FUSE_FAB_CODE) & FUSE_FAB_CODE_MASK; + + /* Lot code must be re-encoded from a 5 digit base-36 'BCD' number + to a binary number. */ + lot = 0; + reg = tegra_fuse_readl(FUSE_LOT_CODE_0) << 2; + + for (i = 0; i < 5; ++i) { + u32 digit = (reg & 0xFC000000) >> 26; + lot *= 36; + lot += digit; + reg <<= 6; + } + + wafer = tegra_fuse_readl(FUSE_WAFER_ID) & FUSE_WAFER_ID_MASK; + x = tegra_fuse_readl(FUSE_X_COORDINATE) & FUSE_X_COORDINATE_MASK; + y = tegra_fuse_readl(FUSE_Y_COORDINATE) & FUSE_Y_COORDINATE_MASK; + + uid = ((unsigned long long)cid << 60ull) + | ((unsigned long long)vendor << 56ull) + | ((unsigned long long)fab << 50ull) + | ((unsigned long long)lot << 24ull) + | ((unsigned long long)wafer << 18ull) + | ((unsigned long long)x << 9ull) + | ((unsigned long long)y << 0ull); + + return uid; +} -- cgit v1.2.3 From 15be9a7b3b08fa11d046162aaeb899e5d726cb90 Mon Sep 17 00:00:00 2001 From: Svyatoslav Ryhel Date: Fri, 30 Jun 2023 10:29:03 +0300 Subject: board: asus: transformer: add ASUS Transformer T30 family support The ASUS Transformer T30 family are 2-in-1 detachable tablets and AiO developed by ASUS that run the Android operating system (TF600T runs Windows RT and P1801-T runs Android and Windows). The T30 Transformers feature a 10.1-inch display (apart P1801-T), an Nvidia Tegra 3 quad-core chip, 1/2 GB of RAM, and 16/32 GB of storage. Transformers board derives from Nvidia Cardhu development board. This patch brings support for 7 known Transformer devices: - ASUS Transformer Prime TF201 - ASUS Transformer Pad TF300T/TF300TG/TF300TL - ASUS VivoTab RT TF600T (Windows RT based) - ASUS Transformer Infinity TF700T - ASUS Portable AiO P1801-T Tested-by: Andreas Westman Dorcsak # all devices Signed-off-by: Svyatoslav Ryhel Signed-off-by: Thierry Reding --- arch/arm/dts/Makefile | 7 + arch/arm/dts/tegra30-asus-p1801-t.dts | 18 +++ arch/arm/dts/tegra30-asus-tf201.dts | 9 ++ arch/arm/dts/tegra30-asus-tf300t.dts | 18 +++ arch/arm/dts/tegra30-asus-tf300tg.dts | 9 ++ arch/arm/dts/tegra30-asus-tf300tl.dts | 9 ++ arch/arm/dts/tegra30-asus-tf600t.dts | 89 ++++++++++++ arch/arm/dts/tegra30-asus-tf700t.dts | 13 ++ arch/arm/dts/tegra30-asus-transformer.dtsi | 211 +++++++++++++++++++++++++++++ arch/arm/mach-tegra/tegra30/Kconfig | 5 + 10 files changed, 388 insertions(+) create mode 100644 arch/arm/dts/tegra30-asus-p1801-t.dts create mode 100644 arch/arm/dts/tegra30-asus-tf201.dts create mode 100644 arch/arm/dts/tegra30-asus-tf300t.dts create mode 100644 arch/arm/dts/tegra30-asus-tf300tg.dts create mode 100644 arch/arm/dts/tegra30-asus-tf300tl.dts create mode 100644 arch/arm/dts/tegra30-asus-tf600t.dts create mode 100644 arch/arm/dts/tegra30-asus-tf700t.dts create mode 100644 arch/arm/dts/tegra30-asus-transformer.dtsi (limited to 'arch') diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 480269fa606..c87729d45ef 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -237,6 +237,13 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra20-ventana.dtb \ tegra20-colibri.dtb \ tegra30-apalis.dtb \ + tegra30-asus-p1801-t.dtb \ + tegra30-asus-tf201.dtb \ + tegra30-asus-tf300t.dtb \ + tegra30-asus-tf300tg.dtb \ + tegra30-asus-tf300tl.dtb \ + tegra30-asus-tf600t.dtb \ + tegra30-asus-tf700t.dtb \ tegra30-beaver.dtb \ tegra30-cardhu.dtb \ tegra30-colibri.dtb \ diff --git a/arch/arm/dts/tegra30-asus-p1801-t.dts b/arch/arm/dts/tegra30-asus-p1801-t.dts new file mode 100644 index 00000000000..4b2dc61713c --- /dev/null +++ b/arch/arm/dts/tegra30-asus-p1801-t.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "tegra30-asus-transformer.dtsi" + +/ { + model = "ASUS Portable AiO P1801-T"; + compatible = "asus,p1801-t", "nvidia,tegra30"; + + /delete-node/ host1x@50000000; + /delete-node/ pwm@7000a000; + + /delete-node/ backlight; + /delete-node/ panel; + + /delete-node/ regulator-pnl; + /delete-node/ regulator-bl; +}; diff --git a/arch/arm/dts/tegra30-asus-tf201.dts b/arch/arm/dts/tegra30-asus-tf201.dts new file mode 100644 index 00000000000..54f359ef960 --- /dev/null +++ b/arch/arm/dts/tegra30-asus-tf201.dts @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "tegra30-asus-transformer.dtsi" + +/ { + model = "ASUS Transformer Prime TF201"; + compatible = "asus,tf201", "nvidia,tegra30"; +}; diff --git a/arch/arm/dts/tegra30-asus-tf300t.dts b/arch/arm/dts/tegra30-asus-tf300t.dts new file mode 100644 index 00000000000..db08488420e --- /dev/null +++ b/arch/arm/dts/tegra30-asus-tf300t.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "tegra30-asus-transformer.dtsi" + +/ { + model = "ASUS Transformer Pad TF300T"; + compatible = "asus,tf300t", "nvidia,tegra30"; + + gpio@6000d000 { + volume-buttons-hog { + gpio-hog; + gpios = , + ; + output-low; + }; + }; +}; diff --git a/arch/arm/dts/tegra30-asus-tf300tg.dts b/arch/arm/dts/tegra30-asus-tf300tg.dts new file mode 100644 index 00000000000..6f42182c99d --- /dev/null +++ b/arch/arm/dts/tegra30-asus-tf300tg.dts @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "tegra30-asus-transformer.dtsi" + +/ { + model = "ASUS Transformer Pad 3G TF300TG"; + compatible = "asus,tf300tg", "nvidia,tegra30"; +}; diff --git a/arch/arm/dts/tegra30-asus-tf300tl.dts b/arch/arm/dts/tegra30-asus-tf300tl.dts new file mode 100644 index 00000000000..242f79170c4 --- /dev/null +++ b/arch/arm/dts/tegra30-asus-tf300tl.dts @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "tegra30-asus-transformer.dtsi" + +/ { + model = "ASUS Transformer Pad LTE TF300TL"; + compatible = "asus,tf300tl", "nvidia,tegra30"; +}; diff --git a/arch/arm/dts/tegra30-asus-tf600t.dts b/arch/arm/dts/tegra30-asus-tf600t.dts new file mode 100644 index 00000000000..c9b8f4fa140 --- /dev/null +++ b/arch/arm/dts/tegra30-asus-tf600t.dts @@ -0,0 +1,89 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "tegra30-asus-transformer.dtsi" + +/ { + model = "ASUS VivoTab RT TF600T"; + compatible = "asus,tf600t", "nvidia,tegra30"; + + aliases { + spi0 = &spi4; + }; + + /delete-node/ host1x@50000000; + + pmic_i2c: i2c@7000d000 { + /* Texas Instruments TPS659110 PMIC */ + pmic: tps65911@2d { + regulators { + vdd_1v2_bl: vdd1 { + regulator-name = "vdd_1v2_backlight"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + ti,regulator-ext-sleep-control = <8>; + }; + + /delete-node/ ldo2; + /delete-node/ ldo3; + + /* uSD slot VDDIO */ + vddio_usd: ldo5 { + regulator-name = "vddio_sdmmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + avdd_dsi_csi: ldo6 { + regulator-name = "avdd_dsi_csi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; + }; + }; + + spi4: spi@7000da00 { + status = "okay"; + spi-max-frequency = <25000000>; + + spi-flash@1 { + compatible = "winbond,w25q32", "jedec,spi-nor"; + reg = <1>; + spi-max-frequency = <20000000>; + }; + }; + + backlight { + power-supply = <&vdd_1v2_bl>; + }; + + gpio-keys { + key-volume-up { + label = "Volume Up"; + gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + key-volume-down { + label = "Volume Down"; + gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + /delete-node/ panel; + + vdd_usd: regulator-usd { + compatible = "regulator-fixed"; + regulator-name = "vdd_usd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + /delete-node/ regulator-pnl; + /delete-node/ regulator-bl; +}; diff --git a/arch/arm/dts/tegra30-asus-tf700t.dts b/arch/arm/dts/tegra30-asus-tf700t.dts new file mode 100644 index 00000000000..d530527c9f8 --- /dev/null +++ b/arch/arm/dts/tegra30-asus-tf700t.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "tegra30-asus-transformer.dtsi" + +/ { + model = "ASUS Transformer Infinity TF700T"; + compatible = "asus,tf700t", "nvidia,tegra30"; + + /delete-node/ host1x@50000000; + + /delete-node/ panel; +}; diff --git a/arch/arm/dts/tegra30-asus-transformer.dtsi b/arch/arm/dts/tegra30-asus-transformer.dtsi new file mode 100644 index 00000000000..4eee1df084c --- /dev/null +++ b/arch/arm/dts/tegra30-asus-transformer.dtsi @@ -0,0 +1,211 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include + +#include "tegra30.dtsi" + +/ { + chosen { + stdout-path = &uarta; + }; + + aliases { + i2c0 = &pwr_i2c; + i2c1 = &gen1_i2c; + + mmc0 = &sdmmc4; /* eMMC */ + mmc1 = &sdmmc1; /* uSD slot */ + + rtc0 = &pmic; + rtc1 = "/rtc@7000e000"; + + usb0 = &usb1; + usb1 = &usb3; /* Dock USB */ + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + host1x@50000000 { + dc@54200000 { + rgb { + status = "okay"; + + nvidia,panel = <&panel>; + }; + }; + }; + + uarta: serial@70006000 { + status = "okay"; + }; + + pwm: pwm@7000a000 { + status = "okay"; + }; + + gen1_i2c: i2c@7000c000 { + status = "okay"; + clock-frequency = <100000>; + }; + + pwr_i2c: i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + + /* Texas Instruments TPS659110 PMIC */ + pmic: tps65911@2d { + compatible = "ti,tps65911"; + reg = <0x2d>; + + interrupts = ; + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + regulators { + /* eMMC VDD */ + vcore_emmc: ldo1 { + regulator-name = "vdd_emmc_core"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + /* uSD slot VDD */ + vdd_usd: ldo2 { + regulator-name = "vdd_usd"; + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + }; + + /* uSD slot VDDIO */ + vddio_usd: ldo3 { + regulator-name = "vddio_usd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3100000>; + }; + }; + }; + }; + + sdmmc1: sdhci@78000000 { + status = "okay"; + bus-width = <4>; + + cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; + power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>; + + vmmc-supply = <&vdd_usd>; + vqmmc-supply = <&vddio_usd>; + }; + + sdmmc4: sdhci@78000600 { + status = "okay"; + bus-width = <8>; + non-removable; + }; + + /* USB via ASUS connector */ + usb1: usb@7d000000 { + status = "okay"; + dr_mode = "otg"; + }; + + /* Dock's USB port */ + usb3: usb@7d008000 { + status = "okay"; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + + enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + power-supply = <&vdd_5v0_bl>; + pwms = <&pwm 0 4000000>; + + brightness-levels = <1 35 70 105 140 175 210 255>; + default-brightness-level = <5>; + }; + + /* PMIC has a built-in 32KHz oscillator which is used by PMC */ + clk32k_in: clock-32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "pmic-oscillator"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + key-volume-down { + label = "Volume Down"; + gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + panel: panel { + compatible = "simple-panel"; + + power-supply = <&vdd_pnl_reg>; + enable-gpios = <&gpio TEGRA_GPIO(N, 6) GPIO_ACTIVE_HIGH>; + + backlight = <&backlight>; + + display-timings { + timing@0 { + /* 1280x800@60Hz */ + clock-frequency = <68000000>; + + hactive = <1280>; + hfront-porch = <48>; + hback-porch = <18>; + hsync-len = <30>; + + vactive = <800>; + vfront-porch = <3>; + vback-porch = <12>; + vsync-len = <5>; + }; + }; + }; + + vdd_pnl_reg: regulator-pnl { + compatible = "regulator-fixed"; + regulator-name = "vdd_panel"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio TEGRA_GPIO(W, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vdd_5v0_bl: regulator-bl { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v0_bl"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + gpio = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; diff --git a/arch/arm/mach-tegra/tegra30/Kconfig b/arch/arm/mach-tegra/tegra30/Kconfig index 85b8ce294f2..4f78d0ba973 100644 --- a/arch/arm/mach-tegra/tegra30/Kconfig +++ b/arch/arm/mach-tegra/tegra30/Kconfig @@ -24,6 +24,10 @@ config TARGET_TEC_NG bool "Avionic Design TEC-NG board" select BOARD_LATE_INIT +config TARGET_TRANSFORMER_T30 + bool "Asus Tegra30 Transformer board" + select BOARD_LATE_INIT + endchoice config SYS_SOC @@ -34,5 +38,6 @@ source "board/nvidia/beaver/Kconfig" source "board/nvidia/cardhu/Kconfig" source "board/toradex/colibri_t30/Kconfig" source "board/avionic-design/tec-ng/Kconfig" +source "board/asus/transformer-t30/Kconfig" endif -- cgit v1.2.3 From 855ffdfa650aa54edf2bfdd99da50cd6255453b8 Mon Sep 17 00:00:00 2001 From: Svyatoslav Ryhel Date: Fri, 30 Jun 2023 10:29:04 +0300 Subject: board: asus: grouper: add Google Nexus 7 (2012) support Nexus 7 is a mini tablet computer co-developed by Google and Asus that runs the Android operating system. The Nexus 7 features a 7" display, an Nvidia Tegra 3 quad-core chip, 1 GB of RAM and 8/16 GB of internal storage. This patch brings support for all 3 known ASUS/Google devices: - Nexus 7 (2012) E1565 - Nexus 7 (2012) PM269 - Nexus 7 (2012) 3G - tilapia Tested-by: Andreas Westman Dorcsak # ASUS Grouper E1565 Tested-by: Svyatoslav Ryhel # ASUS Grouper E1565 Signed-off-by: Svyatoslav Ryhel Signed-off-by: Thierry Reding --- arch/arm/dts/Makefile | 3 + arch/arm/dts/tegra30-asus-grouper-common.dtsi | 157 +++++++++++++++++++++ arch/arm/dts/tegra30-asus-nexus7-grouper-E1565.dts | 43 ++++++ arch/arm/dts/tegra30-asus-nexus7-grouper-PM269.dts | 36 +++++ arch/arm/dts/tegra30-asus-nexus7-tilapia-E1565.dts | 62 ++++++++ arch/arm/mach-tegra/tegra30/Kconfig | 5 + 6 files changed, 306 insertions(+) create mode 100644 arch/arm/dts/tegra30-asus-grouper-common.dtsi create mode 100644 arch/arm/dts/tegra30-asus-nexus7-grouper-E1565.dts create mode 100644 arch/arm/dts/tegra30-asus-nexus7-grouper-PM269.dts create mode 100644 arch/arm/dts/tegra30-asus-nexus7-tilapia-E1565.dts (limited to 'arch') diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index c87729d45ef..f2b4044a017 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -237,6 +237,9 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra20-ventana.dtb \ tegra20-colibri.dtb \ tegra30-apalis.dtb \ + tegra30-asus-nexus7-grouper-PM269.dtb \ + tegra30-asus-nexus7-grouper-E1565.dtb \ + tegra30-asus-nexus7-tilapia-E1565.dtb \ tegra30-asus-p1801-t.dtb \ tegra30-asus-tf201.dtb \ tegra30-asus-tf300t.dtb \ diff --git a/arch/arm/dts/tegra30-asus-grouper-common.dtsi b/arch/arm/dts/tegra30-asus-grouper-common.dtsi new file mode 100644 index 00000000000..4fa980f24f9 --- /dev/null +++ b/arch/arm/dts/tegra30-asus-grouper-common.dtsi @@ -0,0 +1,157 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include + +#include "tegra30.dtsi" + +/ { + chosen { + stdout-path = &uarta; + }; + + aliases { + i2c0 = &pwr_i2c; + + mmc0 = &sdmmc4; /* eMMC */ + + rtc0 = &pmic; + rtc1 = "/rtc@7000e000"; + + usb0 = &usb1; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + host1x@50000000 { + dc@54200000 { + nvidia,180-rotation; + rgb { + status = "okay"; + + nvidia,panel = <&panel>; + }; + }; + }; + + gpio@6000d000 { + volume-buttons-hog { + gpio-hog; + gpios = , + ; + output-low; + }; + }; + + uarta: serial@70006000 { + status = "okay"; + }; + + pwm: pwm@7000a000 { + status = "okay"; + }; + + pwr_i2c: i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + }; + + sdmmc4: sdhci@78000600 { + status = "okay"; + bus-width = <8>; + non-removable; + }; + + usb1: usb@7d000000 { + status = "okay"; + dr_mode = "otg"; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + + enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + power-supply = <&vdd_5v0_bl>; + pwms = <&pwm 0 50000>; + + brightness-levels = <1 35 70 105 140 175 210 255>; + default-brightness-level = <5>; + }; + + /* PMIC has a built-in 32KHz oscillator which is used by PMC */ + clk32k_in: clock-32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "pmic-oscillator"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + key-volume-down { + label = "Volume Down"; + gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + panel: panel { + compatible = "simple-panel"; + + power-supply = <&vdd_pnl_reg>; + enable-gpios = <&gpio TEGRA_GPIO(N, 6) GPIO_ACTIVE_HIGH>; + + backlight = <&backlight>; + + display-timings { + timing@0 { + /* 1280x800@60Hz */ + clock-frequency = <68000000>; + + hactive = <800>; + hfront-porch = <24>; + hback-porch = <32>; + hsync-len = <24>; + + vactive = <1280>; + vfront-porch = <5>; + vback-porch = <32>; + vsync-len = <1>; + }; + }; + }; + + vdd_pnl_reg: regulator-pnl { + compatible = "regulator-fixed"; + regulator-name = "vdd_panel"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio TEGRA_GPIO(W, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vdd_5v0_bl: regulator-bl { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v0_bl"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + gpio = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; diff --git a/arch/arm/dts/tegra30-asus-nexus7-grouper-E1565.dts b/arch/arm/dts/tegra30-asus-nexus7-grouper-E1565.dts new file mode 100644 index 00000000000..a98d3e21455 --- /dev/null +++ b/arch/arm/dts/tegra30-asus-nexus7-grouper-E1565.dts @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "tegra30-asus-grouper-common.dtsi" + +/ { + model = "ASUS Google Nexus 7 (Project Nakasi / ME370T) E1565"; + compatible = "asus,grouper", "nvidia,tegra30"; + + i2c@7000d000 { + pmic: max77663@3c { + compatible = "maxim,max77663"; + reg = <0x3c>; + + interrupts = ; + #interrupt-cells = <2>; + interrupt-controller; + + system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + regulators { + vdd_1v8: sd2 { + regulator-name = "vdd_1v8_gen"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + /* eMMC VDD */ + vcore_emmc: ldo3 { + regulator-name = "vcore_emmc"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3100000>; + regulator-always-on; + }; + }; + }; + }; +}; diff --git a/arch/arm/dts/tegra30-asus-nexus7-grouper-PM269.dts b/arch/arm/dts/tegra30-asus-nexus7-grouper-PM269.dts new file mode 100644 index 00000000000..44ea218a472 --- /dev/null +++ b/arch/arm/dts/tegra30-asus-nexus7-grouper-PM269.dts @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "tegra30-asus-grouper-common.dtsi" + +/ { + model = "ASUS Google Nexus 7 (Project Nakasi / ME370T) PM269"; + compatible = "asus,grouper", "nvidia,tegra30"; + + i2c@7000d000 { + /* Texas Instruments TPS659110 PMIC */ + pmic: tps65911@2d { + compatible = "ti,tps65911"; + reg = <0x2d>; + + interrupts = ; + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + regulators { + /* eMMC VDD */ + vcore_emmc: ldo1 { + regulator-name = "vdd_emmc_core"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + }; +}; diff --git a/arch/arm/dts/tegra30-asus-nexus7-tilapia-E1565.dts b/arch/arm/dts/tegra30-asus-nexus7-tilapia-E1565.dts new file mode 100644 index 00000000000..812d5a1ba70 --- /dev/null +++ b/arch/arm/dts/tegra30-asus-nexus7-tilapia-E1565.dts @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "tegra30-asus-grouper-common.dtsi" + +/ { + model = "ASUS Google Nexus 7 (Project Bach / ME370TG) E1565"; + compatible = "asus,tilapia", "nvidia,tegra30"; + + i2c@7000d000 { + pmic: max77663@3c { + compatible = "maxim,max77663"; + reg = <0x3c>; + + interrupts = ; + #interrupt-cells = <2>; + interrupt-controller; + + system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + regulators { + vdd_1v8: sd2 { + regulator-name = "vdd_1v8_gen"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + /* eMMC VDD */ + vcore_emmc: ldo3 { + regulator-name = "vcore_emmc"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3100000>; + regulator-always-on; + }; + }; + }; + }; + + panel { + display-timings { + timing@0 { + /* 1280x800@60Hz */ + clock-frequency = <81750000>; + + hactive = <800>; + hfront-porch = <64>; + hback-porch = <128>; + hsync-len = <64>; + + vactive = <1280>; + vfront-porch = <5>; + vback-porch = <2>; + vsync-len = <1>; + }; + }; + }; +}; diff --git a/arch/arm/mach-tegra/tegra30/Kconfig b/arch/arm/mach-tegra/tegra30/Kconfig index 4f78d0ba973..6cbb73ebeef 100644 --- a/arch/arm/mach-tegra/tegra30/Kconfig +++ b/arch/arm/mach-tegra/tegra30/Kconfig @@ -20,6 +20,10 @@ config TARGET_COLIBRI_T30 bool "Toradex Colibri T30 board" select BOARD_LATE_INIT +config TARGET_GROUPER + bool "Asus and Google Grouper board" + select BOARD_LATE_INIT + config TARGET_TEC_NG bool "Avionic Design TEC-NG board" select BOARD_LATE_INIT @@ -37,6 +41,7 @@ source "board/toradex/apalis_t30/Kconfig" source "board/nvidia/beaver/Kconfig" source "board/nvidia/cardhu/Kconfig" source "board/toradex/colibri_t30/Kconfig" +source "board/asus/grouper/Kconfig" source "board/avionic-design/tec-ng/Kconfig" source "board/asus/transformer-t30/Kconfig" -- cgit v1.2.3 From 623a8c812e127c4f008dfbb60f29edc8c7d94e09 Mon Sep 17 00:00:00 2001 From: Svyatoslav Ryhel Date: Fri, 30 Jun 2023 10:29:05 +0300 Subject: board: lg: x3: add Optimus 4X HD and Optimus Vu support LG X3 is a development board based on Nvidia Tegra 3 SoC on base of which Optimus 4X HD and Optimus Vu were created. Both smartphones feature a 4.7" and 5" panels respectively, an Nvidia Tegra 3 quad-core chip, 1 GB of RAM and 16/32 GB of internal storage. Optimux 4X HD additionally has a micro SD slot. Tested-by: Andreas Westman Dorcsak # LG P880 T30 Tested-by: Svyatoslav Ryhel # LG P895 T30 Signed-off-by: Svyatoslav Ryhel Signed-off-by: Thierry Reding --- arch/arm/dts/Makefile | 2 + arch/arm/dts/tegra30-lg-p880.dts | 40 ++++++++ arch/arm/dts/tegra30-lg-p895.dts | 50 ++++++++++ arch/arm/dts/tegra30-lg-x3.dtsi | 180 ++++++++++++++++++++++++++++++++++++ arch/arm/mach-tegra/tegra30/Kconfig | 5 + 5 files changed, 277 insertions(+) create mode 100644 arch/arm/dts/tegra30-lg-p880.dts create mode 100644 arch/arm/dts/tegra30-lg-p895.dts create mode 100644 arch/arm/dts/tegra30-lg-x3.dtsi (limited to 'arch') diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index f2b4044a017..f31cabc27b3 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -250,6 +250,8 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra30-beaver.dtb \ tegra30-cardhu.dtb \ tegra30-colibri.dtb \ + tegra30-lg-p880.dtb \ + tegra30-lg-p895.dtb \ tegra30-tec-ng.dtb \ tegra114-dalmore.dtb \ tegra124-apalis.dtb \ diff --git a/arch/arm/dts/tegra30-lg-p880.dts b/arch/arm/dts/tegra30-lg-p880.dts new file mode 100644 index 00000000000..81d364310d0 --- /dev/null +++ b/arch/arm/dts/tegra30-lg-p880.dts @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "tegra30-lg-x3.dtsi" + +/ { + model = "LG Optimus 4X HD"; + compatible = "lge,p880", "nvidia,tegra30"; + + aliases { + mmc1 = &sdmmc3; /* uSD slot */ + }; + + sdmmc3: sdhci@78000400 { + status = "okay"; + bus-width = <4>; + + cd-gpios = <&gpio TEGRA_GPIO(W, 5) GPIO_ACTIVE_LOW>; + + vmmc-supply = <&vdd_usd>; + vqmmc-supply = <&vdd_1v8_vio>; + }; + + gpio-keys { + key-volume-up { + label = "Volume Up"; + gpios = <&gpio TEGRA_GPIO(O, 7) GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + panel: panel { + compatible = "jdi,dx12d100vm0eaa"; + + enable-gpios = <&gpio TEGRA_GPIO(Y, 0) GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>; + + backlight = <&backlight>; + }; +}; diff --git a/arch/arm/dts/tegra30-lg-p895.dts b/arch/arm/dts/tegra30-lg-p895.dts new file mode 100644 index 00000000000..074205d5a98 --- /dev/null +++ b/arch/arm/dts/tegra30-lg-p895.dts @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "tegra30-lg-x3.dtsi" + +/ { + model = "LG Optimus Vu"; + compatible = "lge,p895", "nvidia,tegra30"; + + gpio-keys { + key-volume-up { + label = "Volume Up"; + gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + panel: panel { + compatible = "hitachi,tx13d100vm0eaa"; + + reset-gpios = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>; + + renesas,gamma = <3>; + renesas,inversion; + renesas,contrast; + + vcc-supply = <&vcc_3v0_lcd>; + iovcc-supply = <&iovcc_1v8_lcd>; + + backlight = <&backlight>; + }; + + vcc_3v0_lcd: regulator-lcd { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v0_lcd"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio TEGRA_GPIO(BB, 0) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + iovcc_1v8_lcd: regulator-lcdvio { + compatible = "regulator-fixed"; + regulator-name = "iovcc_1v8_lcd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio TEGRA_GPIO(Y, 0) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; diff --git a/arch/arm/dts/tegra30-lg-x3.dtsi b/arch/arm/dts/tegra30-lg-x3.dtsi new file mode 100644 index 00000000000..922e39915e5 --- /dev/null +++ b/arch/arm/dts/tegra30-lg-x3.dtsi @@ -0,0 +1,180 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include + +#include "tegra30.dtsi" + +/ { + chosen { + stdout-path = &uartd; + }; + + aliases { + i2c0 = &pwr_i2c; + i2c1 = &gen2_i2c; + + mmc0 = &sdmmc4; /* eMMC */ + + rtc0 = &pmic; + rtc1 = "/rtc@7000e000"; + + spi0 = &dsi_spi; + + usb0 = µ_usb; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + host1x@50000000 { + dc@54200000 { + rgb { + status = "okay"; + + nvidia,panel = <&bridge>; + }; + }; + }; + + uartd: serial@70006300 { + status = "okay"; + }; + + gen2_i2c: i2c@7000c400 { + status = "okay"; + clock-frequency = <400000>; + + backlight: lm3533@36 { + compatible = "ti,lm3533"; + reg = <0x36>; + + enable-gpios = <&gpio TEGRA_GPIO(N, 6) GPIO_ACTIVE_HIGH>; + default-brightness-level = <128>; + }; + + muic@44 { + compatible = "maxim,max14526-muic"; + reg = <0x44>; + + maxim,ap-usb; + + usif-gpios = <&gpio TEGRA_GPIO(Y, 3) GPIO_ACTIVE_HIGH>; + dp2t-gpios = <&gpio TEGRA_GPIO(CC, 2) GPIO_ACTIVE_HIGH>; + }; + }; + + pwr_i2c: i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + + pmic: max77663@1c { + compatible = "maxim,max77663"; + reg = <0x1c>; + + interrupts = ; + #interrupt-cells = <2>; + interrupt-controller; + + #gpio-cells = <2>; + gpio-controller; + + system-power-controller; + + regulators { + vdd_1v8_vio: sd2 { + regulator-name = "vdd_1v8_gen"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_usd: ldo3 { + regulator-name = "vdd_sdmmc3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + }; + + vcore_emmc: ldo5 { + regulator-name = "vdd_ddr_rx"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + }; + + dsi_spi: spi@7000dc00 { + status = "okay"; + spi-max-frequency = <25000000>; + + bridge: bridge-spi@2 { + compatible = "solomon,ssd2825"; + reg = <2>; + + spi-cpol; + spi-cpha; + + spi-max-frequency = <1000000>; + + power-gpios = <&gpio TEGRA_GPIO(B, 1) GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio TEGRA_GPIO(O, 2) GPIO_ACTIVE_HIGH>; + + clocks = <&ssd2825_refclk>; + clock-names = "tx_clk"; + + panel = <&panel>; + }; + }; + + sdmmc4: sdhci@78000600 { + status = "okay"; + bus-width = <8>; + non-removable; + + vmmc-supply = <&vcore_emmc>; + vqmmc-supply = <&vdd_1v8_vio>; + }; + + micro_usb: usb@7d000000 { + status = "okay"; + dr_mode = "otg"; + }; + + /* PMIC has a built-in 32KHz oscillator which is used by PMC */ + clk32k_in: clock-32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "pmic-oscillator"; + }; + + ssd2825_refclk: clock-ssd2825 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "ssd2825-refclk"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + key-volume-down { + label = "Volume Down"; + gpios = <&gpio TEGRA_GPIO(O, 4) GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; diff --git a/arch/arm/mach-tegra/tegra30/Kconfig b/arch/arm/mach-tegra/tegra30/Kconfig index 6cbb73ebeef..9b1df21d281 100644 --- a/arch/arm/mach-tegra/tegra30/Kconfig +++ b/arch/arm/mach-tegra/tegra30/Kconfig @@ -32,6 +32,10 @@ config TARGET_TRANSFORMER_T30 bool "Asus Tegra30 Transformer board" select BOARD_LATE_INIT +config TARGET_X3_T30 + bool "LG X3 Tegra30 board" + select BOARD_LATE_INIT + endchoice config SYS_SOC @@ -44,5 +48,6 @@ source "board/toradex/colibri_t30/Kconfig" source "board/asus/grouper/Kconfig" source "board/avionic-design/tec-ng/Kconfig" source "board/asus/transformer-t30/Kconfig" +source "board/lg/x3-t30/Kconfig" endif -- cgit v1.2.3 From bdf9dead86f06c7d6980c399a4a6339430b531ec Mon Sep 17 00:00:00 2001 From: Svyatoslav Ryhel Date: Fri, 30 Jun 2023 10:29:06 +0300 Subject: board: htc: endeavoru: add One X support The HTC One X is a touchscreen-based, slate-sized smartphone designed and manufactured by HTC that runs the Android operating system. The One X features a 4.7" display, an Nvidia Tegra 3 quad-core chip, 1 GB of RAM and non-extendable 32 GB of internal storage. UART-A is default debug port. Tested-by: Andreas Westman Dorcsak Tested-by: Ion Agorria Tested-by: Svyatoslav Ryhel Signed-off-by: Svyatoslav Ryhel Signed-off-by: Thierry Reding --- arch/arm/dts/Makefile | 1 + arch/arm/dts/tegra30-htc-endeavoru.dts | 166 +++++++++++++++++++++++++++++++++ arch/arm/mach-tegra/tegra30/Kconfig | 5 + 3 files changed, 172 insertions(+) create mode 100644 arch/arm/dts/tegra30-htc-endeavoru.dts (limited to 'arch') diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index f31cabc27b3..3de10ec9217 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -250,6 +250,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra30-beaver.dtb \ tegra30-cardhu.dtb \ tegra30-colibri.dtb \ + tegra30-htc-endeavoru.dtb \ tegra30-lg-p880.dtb \ tegra30-lg-p895.dtb \ tegra30-tec-ng.dtb \ diff --git a/arch/arm/dts/tegra30-htc-endeavoru.dts b/arch/arm/dts/tegra30-htc-endeavoru.dts new file mode 100644 index 00000000000..c55e193d1d7 --- /dev/null +++ b/arch/arm/dts/tegra30-htc-endeavoru.dts @@ -0,0 +1,166 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +/* This dts file describes the HTC One X smartphone */ +/* CPU Speedo ID 4, Soc Speedo ID 1, CPU Process: 1, Core Process: 0 */ + +#include + +#include "tegra30.dtsi" + +/ { + model = "HTC One X"; + compatible = "htc,endeavoru", "nvidia,tegra30"; + + chosen { + stdout-path = &uarta; + }; + + aliases { + i2c0 = &pwr_i2c; + + mmc0 = &sdmmc4; /* eMMC */ + + rtc0 = &pmic; + rtc1 = "/rtc@7000e000"; + + usb0 = µ_usb; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + host1x@50000000 { + dc@54200000 { + clocks = <&tegra_car TEGRA30_CLK_DISP1>, + <&tegra_car TEGRA30_CLK_PLL_D_OUT0>; + + rgb { + status = "okay"; + + nvidia,panel = <&dsia>; + }; + }; + + dsia: dsi@54300000 { + status = "okay"; + + avdd-dsi-csi-supply = <&avdd_dsi_csi>; + + panel = <&panel>; + }; + }; + + uarta: serial@70006000 { + status = "okay"; + }; + + pwr_i2c: i2c@7000d000 { + status = "okay"; + clock-frequency = <100000>; + + /* Texas Instruments TPS80032 PMIC */ + pmic: tps80032@48 { + compatible = "ti,tps80032"; + reg = <0x48>; + + regulators { + /* DSI VDD */ + avdd_dsi_csi: ldo1 { + regulator-name = "avdd_dsi_csi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + }; + }; + }; + + sdmmc4: sdhci@78000600 { + status = "okay"; + bus-width = <8>; + non-removable; + }; + + micro_usb: usb@7d000000 { + status = "okay"; + dr_mode = "otg"; + }; + + backlight: backlight { + compatible = "nvidia,tegra-pwm-backlight"; + + nvidia,pwm-source = <1>; + nvidia,default-brightness = <0x8E>; + }; + + /* PMIC has a built-in 32KHz oscillator which is used by PMC */ + clk32k_in: clock-32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "pmic-oscillator"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(U, 6) GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + key-volume-down { + label = "Volume Down"; + gpios = <&gpio TEGRA_GPIO(W, 3) GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + panel: panel { + compatible = "htc,edge-panel"; + + reset-gpios = <&gpio TEGRA_GPIO(N, 6) GPIO_ACTIVE_LOW>; + + vdd-supply = <&vdd_3v3_panel>; + vddio-supply = <&vdd_1v8_panel>; + + backlight = <&backlight>; + }; + + vcore_emmc: regulator-emmc { + compatible = "regulator-fixed"; + regulator-name = "vdd_2v85_sdmmc"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + gpio = <&gpio TEGRA_GPIO(M, 3) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vdd_3v3_panel: regulator-lcm { + compatible = "regulator-fixed"; + regulator-name = "v_lcm_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio TEGRA_GPIO(E, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vdd_1v8_panel: regulator-lcmio { + compatible = "regulator-fixed"; + regulator-name = "v_lcmio_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio TEGRA_GPIO(E, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; diff --git a/arch/arm/mach-tegra/tegra30/Kconfig b/arch/arm/mach-tegra/tegra30/Kconfig index 9b1df21d281..3e478b3b7b3 100644 --- a/arch/arm/mach-tegra/tegra30/Kconfig +++ b/arch/arm/mach-tegra/tegra30/Kconfig @@ -20,6 +20,10 @@ config TARGET_COLIBRI_T30 bool "Toradex Colibri T30 board" select BOARD_LATE_INIT +config TARGET_ENDEAVORU + bool "HTC Endeavoru T30 board" + select BOARD_LATE_INIT + config TARGET_GROUPER bool "Asus and Google Grouper board" select BOARD_LATE_INIT @@ -45,6 +49,7 @@ source "board/toradex/apalis_t30/Kconfig" source "board/nvidia/beaver/Kconfig" source "board/nvidia/cardhu/Kconfig" source "board/toradex/colibri_t30/Kconfig" +source "board/htc/endeavoru/Kconfig" source "board/asus/grouper/Kconfig" source "board/avionic-design/tec-ng/Kconfig" source "board/asus/transformer-t30/Kconfig" -- cgit v1.2.3