From db3b17db5c67936f50a0bb2f6b12870320b870f6 Mon Sep 17 00:00:00 2001 From: Paul Barker Date: Wed, 30 Oct 2024 14:51:36 +0000 Subject: ARM: dts: Drop unused RZ/G2L devicetrees We are now using the dts/upstream subtree for the RZ/G2L SoC family so we can drop unused devicetree files from arch/arm/dts. Signed-off-by: Paul Barker Reviewed-by: Marek Vasut --- arch/arm/dts/Makefile | 3 - arch/arm/dts/r9a07g044.dtsi | 1273 ----------------------------- arch/arm/dts/r9a07g044l2-smarc.dts | 39 - arch/arm/dts/r9a07g044l2.dtsi | 13 - arch/arm/dts/rz-smarc-common.dtsi | 183 ----- arch/arm/dts/rzg2l-smarc-pinfunction.dtsi | 157 ---- arch/arm/dts/rzg2l-smarc-som.dtsi | 371 --------- arch/arm/dts/rzg2l-smarc.dtsi | 181 ---- 8 files changed, 2220 deletions(-) delete mode 100644 arch/arm/dts/r9a07g044.dtsi delete mode 100644 arch/arm/dts/r9a07g044l2-smarc.dts delete mode 100644 arch/arm/dts/r9a07g044l2.dtsi delete mode 100644 arch/arm/dts/rz-smarc-common.dtsi delete mode 100644 arch/arm/dts/rzg2l-smarc-pinfunction.dtsi delete mode 100644 arch/arm/dts/rzg2l-smarc-som.dtsi delete mode 100644 arch/arm/dts/rzg2l-smarc.dtsi (limited to 'arch') diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 6ecc7bbdf25..042282f3723 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -975,9 +975,6 @@ dtb-$(CONFIG_ARCH_IMXRT) += imxrt1050-evk.dtb \ imxrt1020-evk.dtb \ imxrt1170-evk.dtb \ -dtb-$(CONFIG_TARGET_RZG2L) += \ - r9a07g044l2-smarc.dts - ifdef CONFIG_RCAR_64 DTC_FLAGS += -R 4 -p 0x1000 endif diff --git a/arch/arm/dts/r9a07g044.dtsi b/arch/arm/dts/r9a07g044.dtsi deleted file mode 100644 index 66f68fc2b24..00000000000 --- a/arch/arm/dts/r9a07g044.dtsi +++ /dev/null @@ -1,1273 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -/* - * Device Tree Source for the RZ/G2L and RZ/G2LC common SoC parts - * - * Copyright (C) 2021 Renesas Electronics Corp. - */ - -#include -#include - -/ { - compatible = "renesas,r9a07g044"; - #address-cells = <2>; - #size-cells = <2>; - - audio_clk1: audio1-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by boards that provide it */ - clock-frequency = <0>; - }; - - audio_clk2: audio2-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by boards that provide it */ - clock-frequency = <0>; - }; - - /* External CAN clock - to be overridden by boards that provide it */ - can_clk: can-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - - /* clock can be either from exclk or crystal oscillator (XIN/XOUT) */ - extal_clk: extal-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board */ - clock-frequency = <0>; - }; - - cluster0_opp: opp-table-0 { - compatible = "operating-points-v2"; - opp-shared; - - opp-150000000 { - opp-hz = /bits/ 64 <150000000>; - opp-microvolt = <1100000>; - clock-latency-ns = <300000>; - }; - opp-300000000 { - opp-hz = /bits/ 64 <300000000>; - opp-microvolt = <1100000>; - clock-latency-ns = <300000>; - }; - opp-600000000 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <1100000>; - clock-latency-ns = <300000>; - }; - opp-1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <1100000>; - clock-latency-ns = <300000>; - opp-suspend; - }; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu-map { - cluster0 { - core0 { - cpu = <&cpu0>; - }; - core1 { - cpu = <&cpu1>; - }; - }; - }; - - cpu0: cpu@0 { - compatible = "arm,cortex-a55"; - reg = <0>; - device_type = "cpu"; - #cooling-cells = <2>; - next-level-cache = <&L3_CA55>; - enable-method = "psci"; - clocks = <&cpg CPG_CORE R9A07G044_CLK_I>; - operating-points-v2 = <&cluster0_opp>; - }; - - cpu1: cpu@100 { - compatible = "arm,cortex-a55"; - reg = <0x100>; - device_type = "cpu"; - next-level-cache = <&L3_CA55>; - enable-method = "psci"; - clocks = <&cpg CPG_CORE R9A07G044_CLK_I>; - operating-points-v2 = <&cluster0_opp>; - }; - - L3_CA55: cache-controller-0 { - compatible = "cache"; - cache-unified; - cache-size = <0x40000>; - cache-level = <3>; - }; - }; - - gpu_opp_table: opp-table-1 { - compatible = "operating-points-v2"; - - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <1100000>; - }; - - opp-400000000 { - opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <1100000>; - }; - - opp-250000000 { - opp-hz = /bits/ 64 <250000000>; - opp-microvolt = <1100000>; - }; - - opp-200000000 { - opp-hz = /bits/ 64 <200000000>; - opp-microvolt = <1100000>; - }; - - opp-125000000 { - opp-hz = /bits/ 64 <125000000>; - opp-microvolt = <1100000>; - }; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <1100000>; - }; - - opp-62500000 { - opp-hz = /bits/ 64 <62500000>; - opp-microvolt = <1100000>; - }; - - opp-50000000 { - opp-hz = /bits/ 64 <50000000>; - opp-microvolt = <1100000>; - }; - }; - - pmu { - compatible = "arm,cortex-a55-pmu"; - interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; - }; - - psci { - compatible = "arm,psci-1.0", "arm,psci-0.2"; - method = "smc"; - }; - - soc: soc { - compatible = "simple-bus"; - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - mtu3: timer@10001200 { - compatible = "renesas,r9a07g044-mtu3", - "renesas,rz-mtu3"; - reg = <0 0x10001200 0 0xb00>; - interrupts = , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - ; - interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0", - "tciv0", "tgie0", "tgif0", - "tgia1", "tgib1", "tciv1", "tciu1", - "tgia2", "tgib2", "tciv2", "tciu2", - "tgia3", "tgib3", "tgic3", "tgid3", - "tciv3", - "tgia4", "tgib4", "tgic4", "tgid4", - "tciv4", - "tgiu5", "tgiv5", "tgiw5", - "tgia6", "tgib6", "tgic6", "tgid6", - "tciv6", - "tgia7", "tgib7", "tgic7", "tgid7", - "tciv7", - "tgia8", "tgib8", "tgic8", "tgid8", - "tciv8", "tciu8"; - clocks = <&cpg CPG_MOD R9A07G044_MTU_X_MCK_MTU3>; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_MTU_X_PRESET_MTU3>; - #pwm-cells = <2>; - status = "disabled"; - }; - - ssi0: ssi@10049c00 { - compatible = "renesas,r9a07g044-ssi", - "renesas,rz-ssi"; - reg = <0 0x10049c00 0 0x400>; - interrupts = , - , - ; - interrupt-names = "int_req", "dma_rx", "dma_tx"; - clocks = <&cpg CPG_MOD R9A07G044_SSI0_PCLK2>, - <&cpg CPG_MOD R9A07G044_SSI0_PCLK_SFR>, - <&audio_clk1>, <&audio_clk2>; - clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; - resets = <&cpg R9A07G044_SSI0_RST_M2_REG>; - dmas = <&dmac 0x2655>, <&dmac 0x2656>; - dma-names = "tx", "rx"; - power-domains = <&cpg>; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - ssi1: ssi@1004a000 { - compatible = "renesas,r9a07g044-ssi", - "renesas,rz-ssi"; - reg = <0 0x1004a000 0 0x400>; - interrupts = , - , - ; - interrupt-names = "int_req", "dma_rx", "dma_tx"; - clocks = <&cpg CPG_MOD R9A07G044_SSI1_PCLK2>, - <&cpg CPG_MOD R9A07G044_SSI1_PCLK_SFR>, - <&audio_clk1>, <&audio_clk2>; - clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; - resets = <&cpg R9A07G044_SSI1_RST_M2_REG>; - dmas = <&dmac 0x2659>, <&dmac 0x265a>; - dma-names = "tx", "rx"; - power-domains = <&cpg>; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - ssi2: ssi@1004a400 { - compatible = "renesas,r9a07g044-ssi", - "renesas,rz-ssi"; - reg = <0 0x1004a400 0 0x400>; - interrupts = , - ; - interrupt-names = "int_req", "dma_rt"; - clocks = <&cpg CPG_MOD R9A07G044_SSI2_PCLK2>, - <&cpg CPG_MOD R9A07G044_SSI2_PCLK_SFR>, - <&audio_clk1>, <&audio_clk2>; - clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; - resets = <&cpg R9A07G044_SSI2_RST_M2_REG>; - dmas = <&dmac 0x265f>; - dma-names = "rt"; - power-domains = <&cpg>; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - ssi3: ssi@1004a800 { - compatible = "renesas,r9a07g044-ssi", - "renesas,rz-ssi"; - reg = <0 0x1004a800 0 0x400>; - interrupts = , - , - ; - interrupt-names = "int_req", "dma_rx", "dma_tx"; - clocks = <&cpg CPG_MOD R9A07G044_SSI3_PCLK2>, - <&cpg CPG_MOD R9A07G044_SSI3_PCLK_SFR>, - <&audio_clk1>, <&audio_clk2>; - clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; - resets = <&cpg R9A07G044_SSI3_RST_M2_REG>; - dmas = <&dmac 0x2661>, <&dmac 0x2662>; - dma-names = "tx", "rx"; - power-domains = <&cpg>; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - spi0: spi@1004ac00 { - compatible = "renesas,r9a07g044-rspi", "renesas,rspi-rz"; - reg = <0 0x1004ac00 0 0x400>; - interrupts = , - , - ; - interrupt-names = "error", "rx", "tx"; - clocks = <&cpg CPG_MOD R9A07G044_RSPI0_CLKB>; - resets = <&cpg R9A07G044_RSPI0_RST>; - dmas = <&dmac 0x2e95>, <&dmac 0x2e96>; - dma-names = "tx", "rx"; - power-domains = <&cpg>; - num-cs = <1>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi1: spi@1004b000 { - compatible = "renesas,r9a07g044-rspi", "renesas,rspi-rz"; - reg = <0 0x1004b000 0 0x400>; - interrupts = , - , - ; - interrupt-names = "error", "rx", "tx"; - clocks = <&cpg CPG_MOD R9A07G044_RSPI1_CLKB>; - resets = <&cpg R9A07G044_RSPI1_RST>; - dmas = <&dmac 0x2e99>, <&dmac 0x2e9a>; - dma-names = "tx", "rx"; - power-domains = <&cpg>; - num-cs = <1>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi2: spi@1004b400 { - compatible = "renesas,r9a07g044-rspi", "renesas,rspi-rz"; - reg = <0 0x1004b400 0 0x400>; - interrupts = , - , - ; - interrupt-names = "error", "rx", "tx"; - clocks = <&cpg CPG_MOD R9A07G044_RSPI2_CLKB>; - resets = <&cpg R9A07G044_RSPI2_RST>; - dmas = <&dmac 0x2e9d>, <&dmac 0x2e9e>; - dma-names = "tx", "rx"; - power-domains = <&cpg>; - num-cs = <1>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - scif0: serial@1004b800 { - compatible = "renesas,scif-r9a07g044"; - reg = <0 0x1004b800 0 0x400>; - interrupts = , - , - , - , - , - ; - interrupt-names = "eri", "rxi", "txi", - "bri", "dri", "tei"; - clocks = <&cpg CPG_MOD R9A07G044_SCIF0_CLK_PCK>; - clock-names = "fck"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_SCIF0_RST_SYSTEM_N>; - status = "disabled"; - }; - - scif1: serial@1004bc00 { - compatible = "renesas,scif-r9a07g044"; - reg = <0 0x1004bc00 0 0x400>; - interrupts = , - , - , - , - , - ; - interrupt-names = "eri", "rxi", "txi", - "bri", "dri", "tei"; - clocks = <&cpg CPG_MOD R9A07G044_SCIF1_CLK_PCK>; - clock-names = "fck"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_SCIF1_RST_SYSTEM_N>; - status = "disabled"; - }; - - scif2: serial@1004c000 { - compatible = "renesas,scif-r9a07g044"; - reg = <0 0x1004c000 0 0x400>; - interrupts = , - , - , - , - , - ; - interrupt-names = "eri", "rxi", "txi", - "bri", "dri", "tei"; - clocks = <&cpg CPG_MOD R9A07G044_SCIF2_CLK_PCK>; - clock-names = "fck"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_SCIF2_RST_SYSTEM_N>; - status = "disabled"; - }; - - scif3: serial@1004c400 { - compatible = "renesas,scif-r9a07g044"; - reg = <0 0x1004c400 0 0x400>; - interrupts = , - , - , - , - , - ; - interrupt-names = "eri", "rxi", "txi", - "bri", "dri", "tei"; - clocks = <&cpg CPG_MOD R9A07G044_SCIF3_CLK_PCK>; - clock-names = "fck"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_SCIF3_RST_SYSTEM_N>; - status = "disabled"; - }; - - scif4: serial@1004c800 { - compatible = "renesas,scif-r9a07g044"; - reg = <0 0x1004c800 0 0x400>; - interrupts = , - , - , - , - , - ; - interrupt-names = "eri", "rxi", "txi", - "bri", "dri", "tei"; - clocks = <&cpg CPG_MOD R9A07G044_SCIF4_CLK_PCK>; - clock-names = "fck"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_SCIF4_RST_SYSTEM_N>; - status = "disabled"; - }; - - sci0: serial@1004d000 { - compatible = "renesas,r9a07g044-sci", "renesas,sci"; - reg = <0 0x1004d000 0 0x400>; - interrupts = , - , - , - ; - interrupt-names = "eri", "rxi", "txi", "tei"; - clocks = <&cpg CPG_MOD R9A07G044_SCI0_CLKP>; - clock-names = "fck"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_SCI0_RST>; - status = "disabled"; - }; - - sci1: serial@1004d400 { - compatible = "renesas,r9a07g044-sci", "renesas,sci"; - reg = <0 0x1004d400 0 0x400>; - interrupts = , - , - , - ; - interrupt-names = "eri", "rxi", "txi", "tei"; - clocks = <&cpg CPG_MOD R9A07G044_SCI1_CLKP>; - clock-names = "fck"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_SCI1_RST>; - status = "disabled"; - }; - - canfd: can@10050000 { - compatible = "renesas,r9a07g044-canfd", "renesas,rzg2l-canfd"; - reg = <0 0x10050000 0 0x8000>; - interrupts = , - , - , - , - , - , - , - ; - interrupt-names = "g_err", "g_recc", - "ch0_err", "ch0_rec", "ch0_trx", - "ch1_err", "ch1_rec", "ch1_trx"; - clocks = <&cpg CPG_MOD R9A07G044_CANFD_PCLK>, - <&cpg CPG_CORE R9A07G044_CLK_P0_DIV2>, - <&can_clk>; - clock-names = "fck", "canfd", "can_clk"; - assigned-clocks = <&cpg CPG_CORE R9A07G044_CLK_P0_DIV2>; - assigned-clock-rates = <50000000>; - resets = <&cpg R9A07G044_CANFD_RSTP_N>, - <&cpg R9A07G044_CANFD_RSTC_N>; - reset-names = "rstp_n", "rstc_n"; - power-domains = <&cpg>; - status = "disabled"; - - channel0 { - status = "disabled"; - }; - channel1 { - status = "disabled"; - }; - }; - - i2c0: i2c@10058000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,riic-r9a07g044", "renesas,riic-rz"; - reg = <0 0x10058000 0 0x400>; - interrupts = , - , - , - , - , - , - , - ; - interrupt-names = "tei", "ri", "ti", "spi", "sti", - "naki", "ali", "tmoi"; - clocks = <&cpg CPG_MOD R9A07G044_I2C0_PCLK>; - clock-frequency = <100000>; - resets = <&cpg R9A07G044_I2C0_MRST>; - power-domains = <&cpg>; - status = "disabled"; - }; - - i2c1: i2c@10058400 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,riic-r9a07g044", "renesas,riic-rz"; - reg = <0 0x10058400 0 0x400>; - interrupts = , - , - , - , - , - , - , - ; - interrupt-names = "tei", "ri", "ti", "spi", "sti", - "naki", "ali", "tmoi"; - clocks = <&cpg CPG_MOD R9A07G044_I2C1_PCLK>; - clock-frequency = <100000>; - resets = <&cpg R9A07G044_I2C1_MRST>; - power-domains = <&cpg>; - status = "disabled"; - }; - - i2c2: i2c@10058800 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,riic-r9a07g044", "renesas,riic-rz"; - reg = <0 0x10058800 0 0x400>; - interrupts = , - , - , - , - , - , - , - ; - interrupt-names = "tei", "ri", "ti", "spi", "sti", - "naki", "ali", "tmoi"; - clocks = <&cpg CPG_MOD R9A07G044_I2C2_PCLK>; - clock-frequency = <100000>; - resets = <&cpg R9A07G044_I2C2_MRST>; - power-domains = <&cpg>; - status = "disabled"; - }; - - i2c3: i2c@10058c00 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,riic-r9a07g044", "renesas,riic-rz"; - reg = <0 0x10058c00 0 0x400>; - interrupts = , - , - , - , - , - , - , - ; - interrupt-names = "tei", "ri", "ti", "spi", "sti", - "naki", "ali", "tmoi"; - clocks = <&cpg CPG_MOD R9A07G044_I2C3_PCLK>; - clock-frequency = <100000>; - resets = <&cpg R9A07G044_I2C3_MRST>; - power-domains = <&cpg>; - status = "disabled"; - }; - - adc: adc@10059000 { - compatible = "renesas,r9a07g044-adc", "renesas,rzg2l-adc"; - reg = <0 0x10059000 0 0x400>; - interrupts = ; - clocks = <&cpg CPG_MOD R9A07G044_ADC_ADCLK>, - <&cpg CPG_MOD R9A07G044_ADC_PCLK>; - clock-names = "adclk", "pclk"; - resets = <&cpg R9A07G044_ADC_PRESETN>, - <&cpg R9A07G044_ADC_ADRST_N>; - reset-names = "presetn", "adrst-n"; - power-domains = <&cpg>; - status = "disabled"; - - #address-cells = <1>; - #size-cells = <0>; - - channel@0 { - reg = <0>; - }; - channel@1 { - reg = <1>; - }; - channel@2 { - reg = <2>; - }; - channel@3 { - reg = <3>; - }; - channel@4 { - reg = <4>; - }; - channel@5 { - reg = <5>; - }; - channel@6 { - reg = <6>; - }; - channel@7 { - reg = <7>; - }; - }; - - tsu: thermal@10059400 { - compatible = "renesas,r9a07g044-tsu", - "renesas,rzg2l-tsu"; - reg = <0 0x10059400 0 0x400>; - clocks = <&cpg CPG_MOD R9A07G044_TSU_PCLK>; - resets = <&cpg R9A07G044_TSU_PRESETN>; - power-domains = <&cpg>; - #thermal-sensor-cells = <1>; - }; - - sbc: spi@10060000 { - compatible = "renesas,r9a07g044-rpc-if", - "renesas,rzg2l-rpc-if"; - reg = <0 0x10060000 0 0x10000>, - <0 0x20000000 0 0x10000000>, - <0 0x10070000 0 0x10000>; - reg-names = "regs", "dirmap", "wbuf"; - interrupts = ; - clocks = <&cpg CPG_MOD R9A07G044_SPI_CLK2>, - <&cpg CPG_MOD R9A07G044_SPI_CLK>; - resets = <&cpg R9A07G044_SPI_RST>; - power-domains = <&cpg>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - cru: video@10830000 { - compatible = "renesas,r9a07g044-cru", "renesas,rzg2l-cru"; - reg = <0 0x10830000 0 0x400>; - clocks = <&cpg CPG_MOD R9A07G044_CRU_VCLK>, - <&cpg CPG_MOD R9A07G044_CRU_PCLK>, - <&cpg CPG_MOD R9A07G044_CRU_ACLK>; - clock-names = "video", "apb", "axi"; - interrupts = , - , - ; - interrupt-names = "image_conv", "image_conv_err", "axi_mst_err"; - resets = <&cpg R9A07G044_CRU_PRESETN>, - <&cpg R9A07G044_CRU_ARESETN>; - reset-names = "presetn", "aresetn"; - power-domains = <&cpg>; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - #address-cells = <1>; - #size-cells = <0>; - - reg = <0>; - cruparallel: endpoint@0 { - reg = <0>; - }; - }; - - port@1 { - #address-cells = <1>; - #size-cells = <0>; - - reg = <1>; - crucsi2: endpoint@0 { - reg = <0>; - remote-endpoint = <&csi2cru>; - }; - }; - }; - }; - - csi2: csi2@10830400 { - compatible = "renesas,r9a07g044-csi2", "renesas,rzg2l-csi2"; - reg = <0 0x10830400 0 0xfc00>; - interrupts = ; - clocks = <&cpg CPG_MOD R9A07G044_CRU_SYSCLK>, - <&cpg CPG_MOD R9A07G044_CRU_VCLK>, - <&cpg CPG_MOD R9A07G044_CRU_PCLK>; - clock-names = "system", "video", "apb"; - resets = <&cpg R9A07G044_CRU_PRESETN>, - <&cpg R9A07G044_CRU_CMN_RSTB>; - reset-names = "presetn", "cmn-rstb"; - power-domains = <&cpg>; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - }; - - port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - csi2cru: endpoint@0 { - reg = <0>; - remote-endpoint = <&crucsi2>; - }; - }; - }; - }; - - dsi: dsi@10850000 { - compatible = "renesas,r9a07g044-mipi-dsi", - "renesas,rzg2l-mipi-dsi"; - reg = <0 0x10850000 0 0x20000>; - interrupts = , - , - , - , - , - , - ; - interrupt-names = "seq0", "seq1", "vin1", "rcv", - "ferr", "ppi", "debug"; - clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>, - <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>, - <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>, - <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>, - <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>, - <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>; - clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk"; - resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>, - <&cpg R9A07G044_MIPI_DSI_ARESET_N>, - <&cpg R9A07G044_MIPI_DSI_PRESET_N>; - reset-names = "rst", "arst", "prst"; - power-domains = <&cpg>; - status = "disabled"; - }; - - vspd: vsp@10870000 { - compatible = "renesas,r9a07g044-vsp2"; - reg = <0 0x10870000 0 0x10000>; - interrupts = ; - clocks = <&cpg CPG_MOD R9A07G044_LCDC_CLK_A>, - <&cpg CPG_MOD R9A07G044_LCDC_CLK_P>, - <&cpg CPG_MOD R9A07G044_LCDC_CLK_D>; - clock-names = "aclk", "pclk", "vclk"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_LCDC_RESET_N>; - renesas,fcp = <&fcpvd>; - }; - - fcpvd: fcp@10880000 { - compatible = "renesas,r9a07g044-fcpvd", - "renesas,fcpv"; - reg = <0 0x10880000 0 0x10000>; - clocks = <&cpg CPG_MOD R9A07G044_LCDC_CLK_A>, - <&cpg CPG_MOD R9A07G044_LCDC_CLK_P>, - <&cpg CPG_MOD R9A07G044_LCDC_CLK_D>; - clock-names = "aclk", "pclk", "vclk"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_LCDC_RESET_N>; - }; - - cpg: clock-controller@11010000 { - compatible = "renesas,r9a07g044-cpg"; - reg = <0 0x11010000 0 0x10000>; - clocks = <&extal_clk>; - clock-names = "extal"; - #clock-cells = <2>; - #reset-cells = <1>; - #power-domain-cells = <0>; - }; - - sysc: system-controller@11020000 { - compatible = "renesas,r9a07g044-sysc"; - reg = <0 0x11020000 0 0x10000>; - interrupts = , - , - , - ; - interrupt-names = "lpm_int", "ca55stbydone_int", - "cm33stbyr_int", "ca55_deny"; - status = "disabled"; - }; - - pinctrl: pinctrl@11030000 { - compatible = "renesas,r9a07g044-pinctrl"; - reg = <0 0x11030000 0 0x10000>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupt-parent = <&irqc>; - interrupt-controller; - gpio-ranges = <&pinctrl 0 0 392>; - clocks = <&cpg CPG_MOD R9A07G044_GPIO_HCLK>; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_GPIO_RSTN>, - <&cpg R9A07G044_GPIO_PORT_RESETN>, - <&cpg R9A07G044_GPIO_SPARE_RESETN>; - }; - - irqc: interrupt-controller@110a0000 { - compatible = "renesas,r9a07g044-irqc", - "renesas,rzg2l-irqc"; - #interrupt-cells = <2>; - #address-cells = <0>; - interrupt-controller; - reg = <0 0x110a0000 0 0x10000>; - interrupts = , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - ; - clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>, - <&cpg CPG_MOD R9A07G044_IA55_PCLK>; - clock-names = "clk", "pclk"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_IA55_RESETN>; - }; - - dmac: dma-controller@11820000 { - compatible = "renesas,r9a07g044-dmac", - "renesas,rz-dmac"; - reg = <0 0x11820000 0 0x10000>, - <0 0x11830000 0 0x10000>; - interrupts = , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - ; - interrupt-names = "error", - "ch0", "ch1", "ch2", "ch3", - "ch4", "ch5", "ch6", "ch7", - "ch8", "ch9", "ch10", "ch11", - "ch12", "ch13", "ch14", "ch15"; - clocks = <&cpg CPG_MOD R9A07G044_DMAC_ACLK>, - <&cpg CPG_MOD R9A07G044_DMAC_PCLK>; - clock-names = "main", "register"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_DMAC_ARESETN>, - <&cpg R9A07G044_DMAC_RST_ASYNC>; - reset-names = "arst", "rst_async"; - #dma-cells = <1>; - dma-channels = <16>; - }; - - gpu: gpu@11840000 { - compatible = "renesas,r9a07g044-mali", - "arm,mali-bifrost"; - reg = <0x0 0x11840000 0x0 0x10000>; - interrupts = , - , - , - ; - interrupt-names = "job", "mmu", "gpu", "event"; - clocks = <&cpg CPG_MOD R9A07G044_GPU_CLK>, - <&cpg CPG_MOD R9A07G044_GPU_AXI_CLK>, - <&cpg CPG_MOD R9A07G044_GPU_ACE_CLK>; - clock-names = "gpu", "bus", "bus_ace"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_GPU_RESETN>, - <&cpg R9A07G044_GPU_AXI_RESETN>, - <&cpg R9A07G044_GPU_ACE_RESETN>; - reset-names = "rst", "axi_rst", "ace_rst"; - operating-points-v2 = <&gpu_opp_table>; - }; - - gic: interrupt-controller@11900000 { - compatible = "arm,gic-v3"; - #interrupt-cells = <3>; - #address-cells = <0>; - interrupt-controller; - reg = <0x0 0x11900000 0 0x40000>, - <0x0 0x11940000 0 0x60000>; - interrupts = ; - }; - - sdhi0: mmc@11c00000 { - compatible = "renesas,sdhi-r9a07g044", - "renesas,rcar-gen3-sdhi"; - reg = <0x0 0x11c00000 0 0x10000>; - interrupts = , - ; - clocks = <&cpg CPG_MOD R9A07G044_SDHI0_IMCLK>, - <&cpg CPG_MOD R9A07G044_SDHI0_CLK_HS>, - <&cpg CPG_MOD R9A07G044_SDHI0_IMCLK2>, - <&cpg CPG_MOD R9A07G044_SDHI0_ACLK>; - clock-names = "core", "clkh", "cd", "aclk"; - resets = <&cpg R9A07G044_SDHI0_IXRST>; - power-domains = <&cpg>; - status = "disabled"; - }; - - sdhi1: mmc@11c10000 { - compatible = "renesas,sdhi-r9a07g044", - "renesas,rcar-gen3-sdhi"; - reg = <0x0 0x11c10000 0 0x10000>; - interrupts = , - ; - clocks = <&cpg CPG_MOD R9A07G044_SDHI1_IMCLK>, - <&cpg CPG_MOD R9A07G044_SDHI1_CLK_HS>, - <&cpg CPG_MOD R9A07G044_SDHI1_IMCLK2>, - <&cpg CPG_MOD R9A07G044_SDHI1_ACLK>; - clock-names = "core", "clkh", "cd", "aclk"; - resets = <&cpg R9A07G044_SDHI1_IXRST>; - power-domains = <&cpg>; - status = "disabled"; - }; - - eth0: ethernet@11c20000 { - compatible = "renesas,r9a07g044-gbeth", - "renesas,rzg2l-gbeth"; - reg = <0 0x11c20000 0 0x10000>; - interrupts = , - , - ; - interrupt-names = "mux", "fil", "arp_ns"; - phy-mode = "rgmii"; - clocks = <&cpg CPG_MOD R9A07G044_ETH0_CLK_AXI>, - <&cpg CPG_MOD R9A07G044_ETH0_CLK_CHI>, - <&cpg CPG_CORE R9A07G044_CLK_HP>; - clock-names = "axi", "chi", "refclk"; - resets = <&cpg R9A07G044_ETH0_RST_HW_N>; - power-domains = <&cpg>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - eth1: ethernet@11c30000 { - compatible = "renesas,r9a07g044-gbeth", - "renesas,rzg2l-gbeth"; - reg = <0 0x11c30000 0 0x10000>; - interrupts = , - , - ; - interrupt-names = "mux", "fil", "arp_ns"; - phy-mode = "rgmii"; - clocks = <&cpg CPG_MOD R9A07G044_ETH1_CLK_AXI>, - <&cpg CPG_MOD R9A07G044_ETH1_CLK_CHI>, - <&cpg CPG_CORE R9A07G044_CLK_HP>; - clock-names = "axi", "chi", "refclk"; - resets = <&cpg R9A07G044_ETH1_RST_HW_N>; - power-domains = <&cpg>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - phyrst: usbphy-ctrl@11c40000 { - compatible = "renesas,r9a07g044-usbphy-ctrl", - "renesas,rzg2l-usbphy-ctrl"; - reg = <0 0x11c40000 0 0x10000>; - clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>; - resets = <&cpg R9A07G044_USB_PRESETN>; - power-domains = <&cpg>; - #reset-cells = <1>; - status = "disabled"; - }; - - ohci0: usb@11c50000 { - compatible = "generic-ohci"; - reg = <0 0x11c50000 0 0x100>; - interrupts = ; - clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, - <&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>; - resets = <&phyrst 0>, - <&cpg R9A07G044_USB_U2H0_HRESETN>; - phys = <&usb2_phy0 1>; - phy-names = "usb"; - power-domains = <&cpg>; - status = "disabled"; - }; - - ohci1: usb@11c70000 { - compatible = "generic-ohci"; - reg = <0 0x11c70000 0 0x100>; - interrupts = ; - clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, - <&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>; - resets = <&phyrst 1>, - <&cpg R9A07G044_USB_U2H1_HRESETN>; - phys = <&usb2_phy1 1>; - phy-names = "usb"; - power-domains = <&cpg>; - status = "disabled"; - }; - - ehci0: usb@11c50100 { - compatible = "generic-ehci"; - reg = <0 0x11c50100 0 0x100>; - interrupts = ; - clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, - <&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>; - resets = <&phyrst 0>, - <&cpg R9A07G044_USB_U2H0_HRESETN>; - phys = <&usb2_phy0 2>; - phy-names = "usb"; - companion = <&ohci0>; - power-domains = <&cpg>; - status = "disabled"; - }; - - ehci1: usb@11c70100 { - compatible = "generic-ehci"; - reg = <0 0x11c70100 0 0x100>; - interrupts = ; - clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, - <&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>; - resets = <&phyrst 1>, - <&cpg R9A07G044_USB_U2H1_HRESETN>; - phys = <&usb2_phy1 2>; - phy-names = "usb"; - companion = <&ohci1>; - power-domains = <&cpg>; - status = "disabled"; - }; - - usb2_phy0: usb-phy@11c50200 { - compatible = "renesas,usb2-phy-r9a07g044", - "renesas,rzg2l-usb2-phy"; - reg = <0 0x11c50200 0 0x700>; - interrupts = ; - clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, - <&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>; - resets = <&phyrst 0>; - #phy-cells = <1>; - power-domains = <&cpg>; - status = "disabled"; - }; - - usb2_phy1: usb-phy@11c70200 { - compatible = "renesas,usb2-phy-r9a07g044", - "renesas,rzg2l-usb2-phy"; - reg = <0 0x11c70200 0 0x700>; - interrupts = ; - clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, - <&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>; - resets = <&phyrst 1>; - #phy-cells = <1>; - power-domains = <&cpg>; - status = "disabled"; - }; - - hsusb: usb@11c60000 { - compatible = "renesas,usbhs-r9a07g044", - "renesas,rza2-usbhs"; - reg = <0 0x11c60000 0 0x10000>; - interrupts = , - , - , - ; - clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, - <&cpg CPG_MOD R9A07G044_USB_U2P_EXR_CPUCLK>; - resets = <&phyrst 0>, - <&cpg R9A07G044_USB_U2P_EXL_SYSRST>; - renesas,buswait = <7>; - phys = <&usb2_phy0 3>; - phy-names = "usb"; - power-domains = <&cpg>; - status = "disabled"; - }; - - wdt0: watchdog@12800800 { - compatible = "renesas,r9a07g044-wdt", - "renesas,rzg2l-wdt"; - reg = <0 0x12800800 0 0x400>; - clocks = <&cpg CPG_MOD R9A07G044_WDT0_PCLK>, - <&cpg CPG_MOD R9A07G044_WDT0_CLK>; - clock-names = "pclk", "oscclk"; - interrupts = , - ; - interrupt-names = "wdt", "perrout"; - resets = <&cpg R9A07G044_WDT0_PRESETN>; - power-domains = <&cpg>; - status = "disabled"; - }; - - wdt1: watchdog@12800c00 { - compatible = "renesas,r9a07g044-wdt", - "renesas,rzg2l-wdt"; - reg = <0 0x12800C00 0 0x400>; - clocks = <&cpg CPG_MOD R9A07G044_WDT1_PCLK>, - <&cpg CPG_MOD R9A07G044_WDT1_CLK>; - clock-names = "pclk", "oscclk"; - interrupts = , - ; - interrupt-names = "wdt", "perrout"; - resets = <&cpg R9A07G044_WDT1_PRESETN>; - power-domains = <&cpg>; - status = "disabled"; - }; - - ostm0: timer@12801000 { - compatible = "renesas,r9a07g044-ostm", - "renesas,ostm"; - reg = <0x0 0x12801000 0x0 0x400>; - interrupts = ; - clocks = <&cpg CPG_MOD R9A07G044_OSTM0_PCLK>; - resets = <&cpg R9A07G044_OSTM0_PRESETZ>; - power-domains = <&cpg>; - status = "disabled"; - }; - - ostm1: timer@12801400 { - compatible = "renesas,r9a07g044-ostm", - "renesas,ostm"; - reg = <0x0 0x12801400 0x0 0x400>; - interrupts = ; - clocks = <&cpg CPG_MOD R9A07G044_OSTM1_PCLK>; - resets = <&cpg R9A07G044_OSTM1_PRESETZ>; - power-domains = <&cpg>; - status = "disabled"; - }; - - ostm2: timer@12801800 { - compatible = "renesas,r9a07g044-ostm", - "renesas,ostm"; - reg = <0x0 0x12801800 0x0 0x400>; - interrupts = ; - clocks = <&cpg CPG_MOD R9A07G044_OSTM2_PCLK>; - resets = <&cpg R9A07G044_OSTM2_PRESETZ>; - power-domains = <&cpg>; - status = "disabled"; - }; - }; - - thermal-zones { - cpu-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&tsu 0>; - sustainable-power = <717>; - - cooling-maps { - map0 { - trip = <&target>; - cooling-device = <&cpu0 0 2>; - contribution = <1024>; - }; - }; - - trips { - sensor_crit: sensor-crit { - temperature = <125000>; - hysteresis = <1000>; - type = "critical"; - }; - - target: trip-point { - temperature = <100000>; - hysteresis = <1000>; - type = "passive"; - }; - }; - }; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; - }; -}; diff --git a/arch/arm/dts/r9a07g044l2-smarc.dts b/arch/arm/dts/r9a07g044l2-smarc.dts deleted file mode 100644 index 568d49cfe44..00000000000 --- a/arch/arm/dts/r9a07g044l2-smarc.dts +++ /dev/null @@ -1,39 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -/* - * Device Tree Source for the RZ/G2L SMARC EVK board - * - * Copyright (C) 2021 Renesas Electronics Corp. - */ - -/dts-v1/; - -/* Enable SCIF2 (SER0) on PMOD1 (CN7) */ -#define PMOD1_SER0 1 - -/* - * To enable MTU3a PWM on PMOD0, - * Disable PMOD1_SER0 by setting "#define PMOD1_SER0 0" above and - * enable PMOD_MTU3 by setting "#define PMOD_MTU3 1" below. - */ -#define PMOD_MTU3 0 - -#if (PMOD_MTU3 && PMOD1_SER0) -#error "Cannot set as PMOD_MTU3 and PMOD1_SER0 are mutually exclusive " -#endif - -#define MTU3_COUNTER_Z_PHASE_SIGNAL 0 - -#if (!PMOD_MTU3 && MTU3_COUNTER_Z_PHASE_SIGNAL) -#error "Cannot set 1 to MTU3_COUNTER_Z_PHASE_SIGNAL as PMOD_MTU3=0" -#endif - -#include "r9a07g044l2.dtsi" -#include "rzg2l-smarc-som.dtsi" -#include "rzg2l-smarc-pinfunction.dtsi" -#include "rz-smarc-common.dtsi" -#include "rzg2l-smarc.dtsi" - -/ { - model = "Renesas SMARC EVK based on r9a07g044l2"; - compatible = "renesas,smarc-evk", "renesas,r9a07g044l2", "renesas,r9a07g044"; -}; diff --git a/arch/arm/dts/r9a07g044l2.dtsi b/arch/arm/dts/r9a07g044l2.dtsi deleted file mode 100644 index 91dc10b2cdb..00000000000 --- a/arch/arm/dts/r9a07g044l2.dtsi +++ /dev/null @@ -1,13 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -/* - * Device Tree Source for the RZ/G2L R9A07G044L2 SoC specific parts - * - * Copyright (C) 2021 Renesas Electronics Corp. - */ - -/dts-v1/; -#include "r9a07g044.dtsi" - -/ { - compatible = "renesas,r9a07g044l2", "renesas,r9a07g044"; -}; diff --git a/arch/arm/dts/rz-smarc-common.dtsi b/arch/arm/dts/rz-smarc-common.dtsi deleted file mode 100644 index b7a3e6caa38..00000000000 --- a/arch/arm/dts/rz-smarc-common.dtsi +++ /dev/null @@ -1,183 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -/* - * Device Tree Source for the RZ/{G2L,G2LC,V2L} SMARC EVK common parts - * - * Copyright (C) 2022 Renesas Electronics Corp. - */ - -#include -#include - -/* - * SSI-WM8978 - * - * This command is required when Playback/Capture - * - * amixer cset name='Left Input Mixer L2 Switch' on - * amixer cset name='Right Input Mixer R2 Switch' on - * amixer cset name='Headphone Playback Volume' 100 - * amixer cset name='PCM Volume' 100% - * amixer cset name='Input PGA Volume' 25 - * - */ - -/ { - aliases { - serial0 = &scif0; - i2c0 = &i2c0; - i2c1 = &i2c1; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - snd_rzg2l: sound { - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,bitclock-master = <&cpu_dai>; - simple-audio-card,frame-master = <&cpu_dai>; - simple-audio-card,mclk-fs = <256>; - - simple-audio-card,widgets = "Microphone", "Microphone Jack"; - simple-audio-card,routing = - "L2", "Mic Bias", - "R2", "Mic Bias", - "Mic Bias", "Microphone Jack"; - - cpu_dai: simple-audio-card,cpu { - }; - - codec_dai: simple-audio-card,codec { - clocks = <&versa3 2>; - sound-dai = <&wm8978>; - }; - }; - - usb0_vbus_otg: regulator-usb0-vbus-otg { - compatible = "regulator-fixed"; - - regulator-name = "USB0_VBUS_OTG"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - vccq_sdhi1: regulator-vccq-sdhi1 { - compatible = "regulator-gpio"; - regulator-name = "SDHI1 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - gpios-states = <1>; - states = <3300000 1>, <1800000 0>; - }; - - x1: x1-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - }; -}; - -&audio_clk1 { - clock-frequency = <11289600>; -}; - -&audio_clk2 { - clock-frequency = <12288000>; -}; - -&canfd { - pinctrl-0 = <&can0_pins &can1_pins>; - pinctrl-names = "default"; - status = "okay"; - - channel0 { - status = "okay"; - }; - - channel1 { - status = "okay"; - }; -}; - -&ehci0 { - dr_mode = "otg"; - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&hsusb { - dr_mode = "otg"; - status = "okay"; -}; - -&i2c0 { - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&i2c1 { - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&ohci0 { - dr_mode = "otg"; - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&phyrst { - status = "okay"; -}; - -&scif0 { - pinctrl-0 = <&scif0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&sdhi1 { - pinctrl-0 = <&sdhi1_pins>; - pinctrl-1 = <&sdhi1_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <®_3p3v>; - vqmmc-supply = <&vccq_sdhi1>; - bus-width = <4>; - sd-uhs-sdr50; - sd-uhs-sdr104; - status = "okay"; -}; - -&spi1 { - pinctrl-0 = <&spi1_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&usb2_phy0 { - pinctrl-0 = <&usb0_pins>; - pinctrl-names = "default"; - - vbus-supply = <&usb0_vbus_otg>; - status = "okay"; -}; - -&usb2_phy1 { - pinctrl-0 = <&usb1_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; diff --git a/arch/arm/dts/rzg2l-smarc-pinfunction.dtsi b/arch/arm/dts/rzg2l-smarc-pinfunction.dtsi deleted file mode 100644 index 18c526c7a4c..00000000000 --- a/arch/arm/dts/rzg2l-smarc-pinfunction.dtsi +++ /dev/null @@ -1,157 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -/* - * Device Tree Source for the RZ/{G2L,V2L} SMARC pincontrol parts - * - * Copyright (C) 2021 Renesas Electronics Corp. - */ - -#include -#include - -&pinctrl { - pinctrl-0 = <&sound_clk_pins>; - pinctrl-names = "default"; - - can0_pins: can0 { - pinmux = , /* TX */ - ; /* RX */ - }; - - /* SW7 should be at position 2->3 so that GPIO8_CAN0_STB line is activated */ - can0-stb-hog { - gpio-hog; - gpios = ; - output-low; - line-name = "can0_stb"; - }; - - can1_pins: can1 { - pinmux = , /* TX */ - ; /* RX */ - }; - - /* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */ - can1-stb-hog { - gpio-hog; - gpios = ; - output-low; - line-name = "can1_stb"; - }; - - i2c0_pins: i2c0 { - pins = "RIIC0_SDA", "RIIC0_SCL"; - input-enable; - }; - - i2c1_pins: i2c1 { - pins = "RIIC1_SDA", "RIIC1_SCL"; - input-enable; - }; - - i2c3_pins: i2c3 { - pinmux = , /* SDA */ - ; /* SCL */ - }; - - mtu3_pins: mtu3 { - mtu3-ext-clk-input-pin { - pinmux = , /* MTCLKA */ - ; /* MTCLKB */ - }; - - mtu3-pwm { - pinmux = , /* MTIOC3A */ - , /* MTIOC3B */ - , /* MTIOC3C */ - ; /* MTIOC3D */ - }; - -#if MTU3_COUNTER_Z_PHASE_SIGNAL - mtu3-zphase-clk { - pinmux = ; /* MTIOC1A */ - }; -#endif /* MTU3_COUNTER_Z_PHASE_SIGNAL */ - }; - - scif0_pins: scif0 { - pinmux = , /* TxD */ - ; /* RxD */ - }; - - scif2_pins: scif2 { - pinmux = , /* TxD */ - , /* RxD */ - , /* CTS# */ - ; /* RTS# */ - }; - - sd1-pwr-en-hog { - gpio-hog; - gpios = ; - output-high; - line-name = "sd1_pwr_en"; - }; - - sdhi1_pins: sd1 { - sd1_data { - pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; - power-source = <3300>; - }; - - sd1_ctrl { - pins = "SD1_CLK", "SD1_CMD"; - power-source = <3300>; - }; - - sd1_mux { - pinmux = ; /* SD1_CD */ - }; - }; - - sdhi1_pins_uhs: sd1_uhs { - sd1_data_uhs { - pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; - power-source = <1800>; - }; - - sd1_ctrl_uhs { - pins = "SD1_CLK", "SD1_CMD"; - power-source = <1800>; - }; - - sd1_mux_uhs { - pinmux = ; /* SD1_CD */ - }; - }; - - sound_clk_pins: sound_clk { - pins = "AUDIO_CLK1", "AUDIO_CLK2"; - input-enable; - }; - - spi1_pins: spi1 { - pinmux = , /* CK */ - , /* MOSI */ - , /* MISO */ - ; /* SSL */ - }; - - ssi0_pins: ssi0 { - pinmux = , /* BCK */ - , /* RCK */ - , /* TXD */ - ; /* RXD */ - }; - - usb0_pins: usb0 { - pinmux = , /* VBUS */ - , /* OVC */ - ; /* OTG_ID */ - }; - - usb1_pins: usb1 { - pinmux = , /* VBUS */ - ; /* OVC */ - }; -}; - diff --git a/arch/arm/dts/rzg2l-smarc-som.dtsi b/arch/arm/dts/rzg2l-smarc-som.dtsi deleted file mode 100644 index 547859c388c..00000000000 --- a/arch/arm/dts/rzg2l-smarc-som.dtsi +++ /dev/null @@ -1,371 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -/* - * Device Tree Source for the RZ/{G2L,V2L} SMARC SOM common parts - * - * Copyright (C) 2021 Renesas Electronics Corp. - */ - -#include -#include -#include - -/* SW1[2] should be at position 2/OFF to enable 64 GB eMMC */ -#define EMMC 1 - -/* - * To enable uSD card on CN3, - * SW1[2] should be at position 3/ON. - * Disable eMMC by setting "#define EMMC 0" above. - */ -#define SDHI (!EMMC) - -/ { - aliases { - ethernet0 = ð0; - ethernet1 = ð1; - }; - - chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; - }; - - memory@48000000 { - device_type = "memory"; - /* first 128MB is reserved for secure area. */ - reg = <0x0 0x48000000 0x0 0x78000000>; - }; - - reg_1p8v: regulator-1p8v { - compatible = "regulator-fixed"; - regulator-name = "fixed-1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_1p1v: regulator-vdd-core { - compatible = "regulator-fixed"; - regulator-name = "fixed-1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-boot-on; - regulator-always-on; - }; - - vccq_sdhi0: regulator-vccq-sdhi0 { - compatible = "regulator-gpio"; - - regulator-name = "SDHI0 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - states = <3300000 1>, <1800000 0>; - regulator-boot-on; - gpios = <&pinctrl RZG2L_GPIO(39, 0) GPIO_ACTIVE_HIGH>; - regulator-always-on; - }; - - /* 32.768kHz crystal */ - x2: x2-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - }; -}; - -&adc { - pinctrl-0 = <&adc_pins>; - pinctrl-names = "default"; - status = "okay"; - - /delete-node/ channel@6; - /delete-node/ channel@7; -}; - -ð0 { - pinctrl-0 = <ð0_pins>; - pinctrl-names = "default"; - phy-handle = <&phy0>; - phy-mode = "rgmii-id"; - status = "okay"; - - phy0: ethernet-phy@7 { - compatible = "ethernet-phy-id0022.1640", - "ethernet-phy-ieee802.3-c22"; - reg = <7>; - interrupt-parent = <&irqc>; - interrupts = ; - rxc-skew-psec = <2400>; - txc-skew-psec = <2400>; - rxdv-skew-psec = <0>; - txen-skew-psec = <0>; - rxd0-skew-psec = <0>; - rxd1-skew-psec = <0>; - rxd2-skew-psec = <0>; - rxd3-skew-psec = <0>; - txd0-skew-psec = <0>; - txd1-skew-psec = <0>; - txd2-skew-psec = <0>; - txd3-skew-psec = <0>; - }; -}; - -ð1 { - pinctrl-0 = <ð1_pins>; - pinctrl-names = "default"; - phy-handle = <&phy1>; - phy-mode = "rgmii-id"; - status = "okay"; - - phy1: ethernet-phy@7 { - compatible = "ethernet-phy-id0022.1640", - "ethernet-phy-ieee802.3-c22"; - reg = <7>; - interrupt-parent = <&irqc>; - interrupts = ; - rxc-skew-psec = <2400>; - txc-skew-psec = <2400>; - rxdv-skew-psec = <0>; - txen-skew-psec = <0>; - rxd0-skew-psec = <0>; - rxd1-skew-psec = <0>; - rxd2-skew-psec = <0>; - rxd3-skew-psec = <0>; - txd0-skew-psec = <0>; - txd1-skew-psec = <0>; - txd2-skew-psec = <0>; - txd3-skew-psec = <0>; - }; -}; - -&extal_clk { - clock-frequency = <24000000>; -}; - -&gpu { - mali-supply = <®_1p1v>; -}; - -&i2c3 { - raa215300: pmic@12 { - compatible = "renesas,raa215300"; - reg = <0x12>, <0x6f>; - reg-names = "main", "rtc"; - - clocks = <&x2>; - clock-names = "xin"; - }; -}; - -&ostm1 { - status = "okay"; -}; - -&ostm2 { - status = "okay"; -}; - -&pinctrl { - adc_pins: adc { - pinmux = ; /* ADC_TRG */ - }; - - eth0_pins: eth0 { - pinmux = , /* ET0_LINKSTA */ - , /* ET0_MDC */ - , /* ET0_MDIO */ - , /* ET0_TXC */ - , /* ET0_TX_CTL */ - , /* ET0_TXD0 */ - , /* ET0_TXD1 */ - , /* ET0_TXD2 */ - , /* ET0_TXD3 */ - , /* ET0_RXC */ - , /* ET0_RX_CTL */ - , /* ET0_RXD0 */ - , /* ET0_RXD1 */ - , /* ET0_RXD2 */ - , /* ET0_RXD3 */ - ; /* IRQ2 */ - }; - - eth1_pins: eth1 { - pinmux = , /* ET1_LINKSTA */ - , /* ET1_MDC */ - , /* ET1_MDIO */ - , /* ET1_TXC */ - , /* ET1_TX_CTL */ - , /* ET1_TXD0 */ - , /* ET1_TXD1 */ - , /* ET1_TXD2 */ - , /* ET1_TXD3 */ - , /* ET1_RXC */ - , /* ET1_RX_CTL */ - , /* ET1_RXD0 */ - , /* ET1_RXD1 */ - , /* ET1_RXD2 */ - , /* ET1_RXD3 */ - ; /* IRQ3 */ - }; - - gpio-sd0-pwr-en-hog { - gpio-hog; - gpios = ; - output-high; - line-name = "gpio_sd0_pwr_en"; - }; - - qspi0_pins: qspi0 { - qspi0-data { - pins = "QSPI0_IO0", "QSPI0_IO1", "QSPI0_IO2", "QSPI0_IO3"; - power-source = <1800>; - }; - - qspi0-ctrl { - pins = "QSPI0_SPCLK", "QSPI0_SSL", "QSPI_RESET#"; - power-source = <1800>; - }; - }; - - /* - * SD0 device selection is XOR between GPIO_SD0_DEV_SEL and SW1[2] - * The below switch logic can be used to select the device between - * eMMC and microSD, after setting GPIO_SD0_DEV_SEL to high in DT. - * SW1[2] should be at position 2/OFF to enable 64 GB eMMC - * SW1[2] should be at position 3/ON to enable uSD card CN3 - */ - sd0-dev-sel-hog { - gpio-hog; - gpios = ; - output-high; - line-name = "sd0_dev_sel"; - }; - - sdhi0_emmc_pins: sd0emmc { - sd0_emmc_data { - pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3", - "SD0_DATA4", "SD0_DATA5", "SD0_DATA6", "SD0_DATA7"; - power-source = <1800>; - }; - - sd0_emmc_ctrl { - pins = "SD0_CLK", "SD0_CMD"; - power-source = <1800>; - }; - - sd0_emmc_rst { - pins = "SD0_RST#"; - power-source = <1800>; - }; - }; - - sdhi0_pins: sd0 { - sd0_data { - pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3"; - power-source = <3300>; - }; - - sd0_ctrl { - pins = "SD0_CLK", "SD0_CMD"; - power-source = <3300>; - }; - - sd0_mux { - pinmux = ; /* SD0_CD */ - }; - }; - - sdhi0_pins_uhs: sd0_uhs { - sd0_data_uhs { - pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3"; - power-source = <1800>; - }; - - sd0_ctrl_uhs { - pins = "SD0_CLK", "SD0_CMD"; - power-source = <1800>; - }; - - sd0_mux_uhs { - pinmux = ; /* SD0_CD */ - }; - }; -}; - -&sbc { - pinctrl-0 = <&qspi0_pins>; - pinctrl-names = "default"; - status = "okay"; - - flash@0 { - compatible = "micron,mt25qu512a", "jedec,spi-nor"; - reg = <0>; - m25p,fast-read; - spi-max-frequency = <50000000>; - spi-rx-bus-width = <4>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - boot@0 { - reg = <0x00000000 0x2000000>; - read-only; - }; - user@2000000 { - reg = <0x2000000 0x2000000>; - }; - }; - }; -}; - -#if SDHI -&sdhi0 { - pinctrl-0 = <&sdhi0_pins>; - pinctrl-1 = <&sdhi0_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <®_3p3v>; - vqmmc-supply = <&vccq_sdhi0>; - bus-width = <4>; - sd-uhs-sdr50; - sd-uhs-sdr104; - status = "okay"; -}; -#endif - -#if EMMC -&sdhi0 { - pinctrl-0 = <&sdhi0_emmc_pins>; - pinctrl-1 = <&sdhi0_emmc_pins>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <®_3p3v>; - vqmmc-supply = <®_1p8v>; - bus-width = <8>; - mmc-hs200-1_8v; - non-removable; - fixed-emmc-driver-type = <1>; - status = "okay"; -}; -#endif - -&wdt0 { - status = "okay"; - timeout-sec = <60>; -}; - -&wdt1 { - status = "okay"; - timeout-sec = <60>; -}; diff --git a/arch/arm/dts/rzg2l-smarc.dtsi b/arch/arm/dts/rzg2l-smarc.dtsi deleted file mode 100644 index 37807f1bda4..00000000000 --- a/arch/arm/dts/rzg2l-smarc.dtsi +++ /dev/null @@ -1,181 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -/* - * Device Tree Source for the RZ/{G2L,V2L} SMARC EVK common parts - * - * Copyright (C) 2021 Renesas Electronics Corp. - */ - -#include -#include - -/ { - aliases { - serial1 = &scif2; - i2c3 = &i2c3; - }; - - osc1: cec-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <12000000>; - }; - - hdmi-out { - compatible = "hdmi-connector"; - type = "d"; - - port { - hdmi_con_out: endpoint { - remote-endpoint = <&adv7535_out>; - }; - }; - }; -}; - -&cpu_dai { - sound-dai = <&ssi0>; -}; - -&dsi { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dsi0_in: endpoint { - }; - }; - - port@1 { - reg = <1>; - dsi0_out: endpoint { - data-lanes = <1 2 3 4>; - remote-endpoint = <&adv7535_in>; - }; - }; - }; -}; - -&i2c1 { - adv7535: hdmi@3d { - compatible = "adi,adv7535"; - reg = <0x3d>; - - interrupt-parent = <&pinctrl>; - interrupts = ; - clocks = <&osc1>; - clock-names = "cec"; - avdd-supply = <®_1p8v>; - dvdd-supply = <®_1p8v>; - pvdd-supply = <®_1p8v>; - a2vdd-supply = <®_1p8v>; - v3p3-supply = <®_3p3v>; - v1p2-supply = <®_1p8v>; - - adi,dsi-lanes = <4>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7535_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - - port@1 { - reg = <1>; - adv7535_out: endpoint { - remote-endpoint = <&hdmi_con_out>; - }; - }; - }; - }; -}; - -&i2c3 { - pinctrl-0 = <&i2c3_pins>; - pinctrl-names = "default"; - clock-frequency = <400000>; - - status = "okay"; - - wm8978: codec@1a { - compatible = "wlf,wm8978"; - #sound-dai-cells = <0>; - reg = <0x1a>; - }; - - versa3: clock-generator@68 { - compatible = "renesas,5p35023"; - reg = <0x68>; - #clock-cells = <1>; - clocks = <&x1>; - - renesas,settings = [ - 80 00 11 19 4c 02 23 7f 83 19 08 a9 5f 25 24 bf - 00 14 7a e1 00 00 00 00 01 55 59 bb 3f 30 90 b6 - 80 b0 45 c4 95 - ]; - - assigned-clocks = <&versa3 0>, <&versa3 1>, - <&versa3 2>, <&versa3 3>, - <&versa3 4>, <&versa3 5>; - assigned-clock-rates = <24000000>, <11289600>, - <11289600>, <12000000>, - <25000000>, <12288000>; - }; -}; - -#if PMOD_MTU3 -&mtu3 { - pinctrl-0 = <&mtu3_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -#if MTU3_COUNTER_Z_PHASE_SIGNAL -/* SDHI cd pin is muxed with counter Z phase signal */ -&sdhi1 { - status = "disabled"; -}; -#endif /* MTU3_COUNTER_Z_PHASE_SIGNAL */ - -&spi1 { - status = "disabled"; -}; -#endif /* PMOD_MTU3 */ - -/* - * To enable SCIF2 (SER0) on PMOD1 (CN7) - * SW1 should be at position 2->3 so that SER0_CTS# line is activated - * SW2 should be at position 2->3 so that SER0_TX line is activated - * SW3 should be at position 2->3 so that SER0_RX line is activated - * SW4 should be at position 2->3 so that SER0_RTS# line is activated - */ -#if PMOD1_SER0 -&scif2 { - pinctrl-0 = <&scif2_pins>; - pinctrl-names = "default"; - - uart-has-rtscts; - status = "okay"; -}; -#endif - -&ssi0 { - pinctrl-0 = <&ssi0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&vccq_sdhi1 { - gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>; -}; -- cgit v1.3.1 From 9d81a9ff990bae1bcf08ae5b888e0b6e12d1b58b Mon Sep 17 00:00:00 2001 From: Paul Barker Date: Fri, 1 Nov 2024 14:20:16 +0000 Subject: arm: renesas: Fix RZ/G2L GICR base address When support for the Renesas RZ/G2L SoC was added, the GICR base address for CPU1 was accidentally used. We should instead supply the GICR base address for CPU0 so that interrupts are correctly configured for the CPU core that U-Boot is actually using. Fixes: 387d4275ab0e ("arm: rmobile: Add basic RZ/G2L family support") Signed-off-by: Paul Barker --- arch/arm/mach-renesas/include/mach/rzg2l.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-renesas/include/mach/rzg2l.h b/arch/arm/mach-renesas/include/mach/rzg2l.h index 057df5cb9d4..c49a71a6dd4 100644 --- a/arch/arm/mach-renesas/include/mach/rzg2l.h +++ b/arch/arm/mach-renesas/include/mach/rzg2l.h @@ -8,6 +8,6 @@ #define __ASM_ARCH_RZG2L_H #define GICD_BASE 0x11900000 -#define GICR_BASE 0x11960000 +#define GICR_BASE 0x11940000 #endif /* __ASM_ARCH_RZG2L_H */ -- cgit v1.3.1 From 5fb5ed2f78656f8f562de37037d58c10b4cc456b Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Mon, 4 Nov 2024 13:50:12 +0000 Subject: board: hoperun: Switch to use complete DTS files from upstream DTS For upstream Linux kernel we use below DTBs for HiHope boards: - r8a774a1-hihope-rzg2m-ex.dtb - r8a774e1-hihope-rzg2h-ex.dtb - r8a774b1-hihope-rzg2n-ex.dtb Update the CONFIG_OF_LIST to match the above. Now that we have switched upstream DTS, drop deleting the nodes and also rename the r8a774*-u-boot.dtsi files to r8a774*-ex-u-boot.dtsi to match the OF_LIST files so that the `bootph-all` property gets applied to required nodes in upstream DTS. Signed-off-by: Lad Prabhakar Signed-off-by: Chris Paterson --- arch/arm/dts/r8a774a1-hihope-rzg2m-ex-u-boot.dtsi | 8 ++++ arch/arm/dts/r8a774a1-hihope-rzg2m-u-boot.dtsi | 26 ------------- arch/arm/dts/r8a774a1-u-boot.dtsi | 42 --------------------- arch/arm/dts/r8a774b1-hihope-rzg2n-ex-u-boot.dtsi | 8 ++++ arch/arm/dts/r8a774b1-hihope-rzg2n-u-boot.dtsi | 26 ------------- arch/arm/dts/r8a774b1-u-boot.dtsi | 40 -------------------- arch/arm/dts/r8a774e1-hihope-rzg2h-ex-u-boot.dtsi | 8 ++++ arch/arm/dts/r8a774e1-hihope-rzg2h-u-boot.dtsi | 26 ------------- arch/arm/dts/r8a774e1-u-boot.dtsi | 46 ----------------------- board/hoperun/hihope-rzg2/hihope-rzg2.c | 6 +-- configs/hihope_rzg2_defconfig | 8 ++-- 11 files changed, 31 insertions(+), 213 deletions(-) create mode 100644 arch/arm/dts/r8a774a1-hihope-rzg2m-ex-u-boot.dtsi delete mode 100644 arch/arm/dts/r8a774a1-hihope-rzg2m-u-boot.dtsi create mode 100644 arch/arm/dts/r8a774b1-hihope-rzg2n-ex-u-boot.dtsi delete mode 100644 arch/arm/dts/r8a774b1-hihope-rzg2n-u-boot.dtsi create mode 100644 arch/arm/dts/r8a774e1-hihope-rzg2h-ex-u-boot.dtsi delete mode 100644 arch/arm/dts/r8a774e1-hihope-rzg2h-u-boot.dtsi (limited to 'arch') diff --git a/arch/arm/dts/r8a774a1-hihope-rzg2m-ex-u-boot.dtsi b/arch/arm/dts/r8a774a1-hihope-rzg2m-ex-u-boot.dtsi new file mode 100644 index 00000000000..dd5a208cc1b --- /dev/null +++ b/arch/arm/dts/r8a774a1-hihope-rzg2m-ex-u-boot.dtsi @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source extras for U-Boot for the Hihope RZ/G2M board + * + * Copyright (C) 2021-2024 Renesas Electronics Corporation + */ + +#include "r8a774a1-u-boot.dtsi" diff --git a/arch/arm/dts/r8a774a1-hihope-rzg2m-u-boot.dtsi b/arch/arm/dts/r8a774a1-hihope-rzg2m-u-boot.dtsi deleted file mode 100644 index 3ad619bdb90..00000000000 --- a/arch/arm/dts/r8a774a1-hihope-rzg2m-u-boot.dtsi +++ /dev/null @@ -1,26 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree Source extras for U-Boot for the Hihope RZ/G2M board - * - * Copyright (C) 2021 Renesas Electronics Corporation - */ - -#include "r8a774a1-u-boot.dtsi" - -&gpio3 { - bt_reg_on{ - gpio-hog; - gpios = <13 GPIO_ACTIVE_HIGH>; - output-low; - line-name = "bt-reg-on"; - }; -}; - -&gpio4 { - wlan_reg_on{ - gpio-hog; - gpios = <6 GPIO_ACTIVE_HIGH>; - output-low; - line-name = "wlan-reg-on"; - }; -}; diff --git a/arch/arm/dts/r8a774a1-u-boot.dtsi b/arch/arm/dts/r8a774a1-u-boot.dtsi index 38f5bfe85fc..3530eeb2718 100644 --- a/arch/arm/dts/r8a774a1-u-boot.dtsi +++ b/arch/arm/dts/r8a774a1-u-boot.dtsi @@ -10,45 +10,3 @@ &extalr_clk { bootph-all; }; - -/delete-node/ &audma0; -/delete-node/ &audma1; -/delete-node/ &can0; -/delete-node/ &can1; -/delete-node/ &canfd; -/delete-node/ &csi20; -/delete-node/ &csi40; -/delete-node/ &du; -/delete-node/ &fcpf0; -/delete-node/ &fcpvb0; -/delete-node/ &fcpvd0; -/delete-node/ &fcpvd1; -/delete-node/ &fcpvd2; -/delete-node/ &fcpvi0; -/delete-node/ &hdmi0; -/delete-node/ &lvds0; -/delete-node/ &rcar_sound; -/delete-node/ &sound_card; -/delete-node/ &vin0; -/delete-node/ &vin1; -/delete-node/ &vin2; -/delete-node/ &vin3; -/delete-node/ &vin4; -/delete-node/ &vin5; -/delete-node/ &vin6; -/delete-node/ &vin7; -/delete-node/ &vspb; -/delete-node/ &vspd0; -/delete-node/ &vspd1; -/delete-node/ &vspd2; -/delete-node/ &vspi0; - -/ { - /delete-node/ hdmi0-out; -}; - -/ { - soc { - /delete-node/ fdp1@fe940000; - }; -}; diff --git a/arch/arm/dts/r8a774b1-hihope-rzg2n-ex-u-boot.dtsi b/arch/arm/dts/r8a774b1-hihope-rzg2n-ex-u-boot.dtsi new file mode 100644 index 00000000000..b378cabb22c --- /dev/null +++ b/arch/arm/dts/r8a774b1-hihope-rzg2n-ex-u-boot.dtsi @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source extras for U-Boot for the Hihope RZ/G2N board + * + * Copyright (C) 2021-2024 Renesas Electronics Corp. + */ + +#include "r8a774b1-u-boot.dtsi" diff --git a/arch/arm/dts/r8a774b1-hihope-rzg2n-u-boot.dtsi b/arch/arm/dts/r8a774b1-hihope-rzg2n-u-boot.dtsi deleted file mode 100644 index 6f2f6c71c2f..00000000000 --- a/arch/arm/dts/r8a774b1-hihope-rzg2n-u-boot.dtsi +++ /dev/null @@ -1,26 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree Source extras for U-Boot for the Hihope RZ/G2N board - * - * Copyright (C) 2021 Renesas Electronics Corp. - */ - -#include "r8a774b1-u-boot.dtsi" - -&gpio3 { - bt_reg_on{ - gpio-hog; - gpios = <13 GPIO_ACTIVE_HIGH>; - output-low; - line-name = "bt-reg-on"; - }; -}; - -&gpio4 { - wlan_reg_on{ - gpio-hog; - gpios = <6 GPIO_ACTIVE_HIGH>; - output-low; - line-name = "wlan-reg-on"; - }; -}; diff --git a/arch/arm/dts/r8a774b1-u-boot.dtsi b/arch/arm/dts/r8a774b1-u-boot.dtsi index d4890ebc298..07aeabc46b4 100644 --- a/arch/arm/dts/r8a774b1-u-boot.dtsi +++ b/arch/arm/dts/r8a774b1-u-boot.dtsi @@ -10,43 +10,3 @@ &extalr_clk { bootph-all; }; - -/delete-node/ &audma0; -/delete-node/ &audma1; -/delete-node/ &can0; -/delete-node/ &can1; -/delete-node/ &canfd; -/delete-node/ &csi20; -/delete-node/ &csi40; -/delete-node/ &du; -/delete-node/ &fcpf0; -/delete-node/ &fcpvb0; -/delete-node/ &fcpvd0; -/delete-node/ &fcpvd1; -/delete-node/ &fcpvi0; -/delete-node/ &hdmi0; -/delete-node/ &lvds0; -/delete-node/ &rcar_sound; -/delete-node/ &sound_card; -/delete-node/ &vin0; -/delete-node/ &vin1; -/delete-node/ &vin2; -/delete-node/ &vin3; -/delete-node/ &vin4; -/delete-node/ &vin5; -/delete-node/ &vin6; -/delete-node/ &vin7; -/delete-node/ &vspb; -/delete-node/ &vspd0; -/delete-node/ &vspd1; -/delete-node/ &vspi0; - -/ { - /delete-node/ hdmi0-out; -}; - -/ { - soc { - /delete-node/ fdp1@fe940000; - }; -}; diff --git a/arch/arm/dts/r8a774e1-hihope-rzg2h-ex-u-boot.dtsi b/arch/arm/dts/r8a774e1-hihope-rzg2h-ex-u-boot.dtsi new file mode 100644 index 00000000000..560bea46ad7 --- /dev/null +++ b/arch/arm/dts/r8a774e1-hihope-rzg2h-ex-u-boot.dtsi @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source extras for U-Boot for the Hihope RZ/G2H board + * + * Copyright (C) 2020-2024 Renesas Electronics Corp. + */ + +#include "r8a774e1-u-boot.dtsi" diff --git a/arch/arm/dts/r8a774e1-hihope-rzg2h-u-boot.dtsi b/arch/arm/dts/r8a774e1-hihope-rzg2h-u-boot.dtsi deleted file mode 100644 index 8e57e03c899..00000000000 --- a/arch/arm/dts/r8a774e1-hihope-rzg2h-u-boot.dtsi +++ /dev/null @@ -1,26 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree Source extras for U-Boot for the Hihope RZ/G2H board - * - * Copyright (C) 2020 Renesas Electronics Corp. - */ - -#include "r8a774e1-u-boot.dtsi" - -&gpio3 { - bt_reg_on{ - gpio-hog; - gpios = <13 GPIO_ACTIVE_HIGH>; - output-low; - line-name = "bt-reg-on"; - }; -}; - -&gpio4 { - wlan_reg_on{ - gpio-hog; - gpios = <6 GPIO_ACTIVE_HIGH>; - output-low; - line-name = "wlan-reg-on"; - }; -}; diff --git a/arch/arm/dts/r8a774e1-u-boot.dtsi b/arch/arm/dts/r8a774e1-u-boot.dtsi index 45ef5b78240..2202731ccb3 100644 --- a/arch/arm/dts/r8a774e1-u-boot.dtsi +++ b/arch/arm/dts/r8a774e1-u-boot.dtsi @@ -10,49 +10,3 @@ &extalr_clk { bootph-all; }; - -/delete-node/ &audma0; -/delete-node/ &audma1; -/delete-node/ &can0; -/delete-node/ &can1; -/delete-node/ &canfd; -/delete-node/ &csi20; -/delete-node/ &csi40; -/delete-node/ &du; -/delete-node/ &fcpf0; -/delete-node/ &fcpf1; -/delete-node/ &fcpvb0; -/delete-node/ &fcpvb1; -/delete-node/ &fcpvd0; -/delete-node/ &fcpvd1; -/delete-node/ &fcpvi0; -/delete-node/ &fcpvi1; -/delete-node/ &hdmi0; -/delete-node/ &lvds0; -/delete-node/ &rcar_sound; -/delete-node/ &sound_card; -/delete-node/ &vin0; -/delete-node/ &vin1; -/delete-node/ &vin2; -/delete-node/ &vin3; -/delete-node/ &vin4; -/delete-node/ &vin5; -/delete-node/ &vin6; -/delete-node/ &vin7; -/delete-node/ &vspbc; -/delete-node/ &vspbd; -/delete-node/ &vspd0; -/delete-node/ &vspd1; -/delete-node/ &vspi0; -/delete-node/ &vspi1; - -/ { - /delete-node/ hdmi0-out; -}; - -/ { - soc { - /delete-node/ fdp1@fe940000; - /delete-node/ fdp1@fe944000; - }; -}; diff --git a/board/hoperun/hihope-rzg2/hihope-rzg2.c b/board/hoperun/hihope-rzg2/hihope-rzg2.c index 0966e257464..8b635ef71ac 100644 --- a/board/hoperun/hihope-rzg2/hihope-rzg2.c +++ b/board/hoperun/hihope-rzg2/hihope-rzg2.c @@ -96,15 +96,15 @@ static bool is_hoperun_hihope_rzg2_board(const char *board_name) int board_fit_config_name_match(const char *name) { if (is_hoperun_hihope_rzg2_board("hoperun,hihope-rzg2m") && - !strcmp(name, "r8a774a1-hihope-rzg2m-u-boot")) + !strcmp(name, "r8a774a1-hihope-rzg2m-ex")) return 0; if (is_hoperun_hihope_rzg2_board("hoperun,hihope-rzg2n") && - !strcmp(name, "r8a774b1-hihope-rzg2n-u-boot")) + !strcmp(name, "r8a774b1-hihope-rzg2n-ex")) return 0; if (is_hoperun_hihope_rzg2_board("hoperun,hihope-rzg2h") && - !strcmp(name, "r8a774e1-hihope-rzg2h-u-boot")) + !strcmp(name, "r8a774e1-hihope-rzg2h-ex")) return 0; return -1; diff --git a/configs/hihope_rzg2_defconfig b/configs/hihope_rzg2_defconfig index f51660300c6..c9753e13657 100644 --- a/configs/hihope_rzg2_defconfig +++ b/configs/hihope_rzg2_defconfig @@ -8,18 +8,18 @@ CONFIG_ARCH_CPU_INIT=y CONFIG_TEXT_BASE=0x50000000 CONFIG_ENV_SIZE=0x20000 CONFIG_ENV_OFFSET=0xFFFE0000 -CONFIG_DEFAULT_DEVICE_TREE="renesas/r8a774a1-hihope-rzg2m" +CONFIG_DEFAULT_DEVICE_TREE="renesas/r8a774a1-hihope-rzg2m-ex" CONFIG_TARGET_HIHOPE_RZG2=y # CONFIG_SPL is not set CONFIG_USE_BOOTARGS=y CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="tftp 0x48080000 Image; tftp 0x48000000 Image-r8a774a1-hihope-rzg2m.dtb; booti 0x48080000 - 0x48000000" -CONFIG_DEFAULT_FDT_FILE="r8a774a1-hihope-rzg2m.dtb" +CONFIG_BOOTCOMMAND="tftp 0x48080000 Image; tftp 0x48000000 Image-r8a774a1-hihope-rzg2m-ex.dtb; booti 0x48080000 - 0x48000000" +CONFIG_DEFAULT_FDT_FILE="r8a774a1-hihope-rzg2m-ex.dtb" # CONFIG_BOARD_EARLY_INIT_F is not set CONFIG_CMD_MMC=y CONFIG_CMD_PART=y CONFIG_CMD_USB=y -CONFIG_OF_LIST="renesas/r8a774a1-hihope-rzg2m renesas/r8a774b1-hihope-rzg2n renesas/r8a774e1-hihope-rzg2h" +CONFIG_OF_LIST="renesas/r8a774a1-hihope-rzg2m-ex renesas/r8a774b1-hihope-rzg2n-ex renesas/r8a774e1-hihope-rzg2h-ex" CONFIG_MULTI_DTB_FIT_LZO=y CONFIG_MULTI_DTB_FIT_USER_DEFINED_AREA=y CONFIG_ENV_IS_IN_MMC=y -- cgit v1.3.1