From 353f2688b4e0fc7b969bc70a02be4b40bf0dd124 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 23 Oct 2007 10:10:08 +0200 Subject: ppc4xx: Add initial AMCC Haleakala PPC405EXr eval board support The Haleakala is nearly identical with the Kilauea eval board. The only difference is that the 405EXr only supports one EMAC and one PCIe interface. This patch adds support for the Haleakala board by using the identical image for Kilauea and Haleakala. The distinction is done by comparing the PVR. Signed-off-by: Stefan Roese --- cpu/ppc4xx/4xx_enet.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'cpu') diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c index 6b4834481e3..67b3a24d2ff 100644 --- a/cpu/ppc4xx/4xx_enet.c +++ b/cpu/ppc4xx/4xx_enet.c @@ -158,7 +158,14 @@ struct eth_device *emac0_dev = NULL; /* * Get count of EMAC devices (doesn't have to be the max. possible number * supported by the cpu) + * + * CONFIG_BOARD_EMAC_COUNT added so now a "dynamic" way to configure the + * EMAC count is possible. As it is needed for the Kilauea/Haleakala + * 405EX/405EXr eval board, using the same binary. */ +#if defined(CONFIG_BOARD_EMAC_COUNT) +#define LAST_EMAC_NUM board_emac_count() +#else /* CONFIG_BOARD_EMAC_COUNT */ #if defined(CONFIG_HAS_ETH3) #define LAST_EMAC_NUM 4 #elif defined(CONFIG_HAS_ETH2) @@ -168,6 +175,7 @@ struct eth_device *emac0_dev = NULL; #else #define LAST_EMAC_NUM 1 #endif +#endif /* CONFIG_BOARD_EMAC_COUNT */ /* normal boards start with EMAC0 */ #if !defined(CONFIG_EMAC_NR_START) @@ -197,6 +205,8 @@ extern int emac4xx_miiphy_read (char *devname, unsigned char addr, extern int emac4xx_miiphy_write (char *devname, unsigned char addr, unsigned char reg, unsigned short value); +int board_emac_count(void); + /*-----------------------------------------------------------------------------+ | ppc_4xx_eth_halt | Disable MAL channel, and EMACn -- cgit v1.2.3