From fd428c05c863aefb575b12b2a1916b02d5bfa759 Mon Sep 17 00:00:00 2001 From: Detlev Zundel Date: Fri, 12 Mar 2010 10:01:12 +0100 Subject: mpc5xxx: Remove all references to MGT5100 We do not support a processor that never reached a real customer. Signed-off-by: Detlev Zundel --- cpu/mpc5xxx/Makefile | 2 +- cpu/mpc5xxx/cpu.c | 7 - cpu/mpc5xxx/cpu_init.c | 35 +-- cpu/mpc5xxx/firmware_sc_task.impl.S | 364 --------------------------- cpu/mpc5xxx/firmware_sc_task_bestcomm.impl.S | 4 - cpu/mpc5xxx/pci_mpc5200.c | 4 +- cpu/mpc5xxx/serial.c | 17 -- cpu/mpc5xxx/start.S | 8 - cpu/mpc5xxx/usb_ohci.c | 7 - cpu/mpc5xxx/usb_ohci.h | 5 - 10 files changed, 10 insertions(+), 443 deletions(-) delete mode 100644 cpu/mpc5xxx/firmware_sc_task.impl.S (limited to 'cpu') diff --git a/cpu/mpc5xxx/Makefile b/cpu/mpc5xxx/Makefile index 06fdbcfb729..0ee0611550b 100644 --- a/cpu/mpc5xxx/Makefile +++ b/cpu/mpc5xxx/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(CPU).a START = start.o -SOBJS = io.o firmware_sc_task_bestcomm.impl.o firmware_sc_task.impl.o +SOBJS = io.o firmware_sc_task_bestcomm.impl.o COBJS = i2c.o traps.o cpu.o cpu_init.o ide.o interrupts.o \ loadtask.o pci_mpc5200.o serial.o speed.o usb_ohci.o usb.o diff --git a/cpu/mpc5xxx/cpu.c b/cpu/mpc5xxx/cpu.c index edfb8282b7d..b20234d32ed 100644 --- a/cpu/mpc5xxx/cpu.c +++ b/cpu/mpc5xxx/cpu.c @@ -50,16 +50,10 @@ int checkcpu (void) { ulong clock = gd->cpu_clk; char buf[32]; -#ifndef CONFIG_MGT5100 uint svr, pvr; -#endif puts ("CPU: "); -#ifdef CONFIG_MGT5100 - puts (CPU_ID_STR); - printf (" (JTAG ID %08lx)", *(vu_long *)MPC5XXX_CDM_JTAGID); -#else svr = get_svr(); pvr = get_pvr(); @@ -77,7 +71,6 @@ int checkcpu (void) printf (" v%d.%d, Core v%d.%d", SVR_MJREV (svr), SVR_MNREV (svr), PVR_MAJ(pvr), PVR_MIN(pvr)); -#endif printf (" at %s MHz\n", strmhz (buf, clock)); return 0; } diff --git a/cpu/mpc5xxx/cpu_init.c b/cpu/mpc5xxx/cpu_init.c index 560c9b311c3..9daf3755acd 100644 --- a/cpu/mpc5xxx/cpu_init.c +++ b/cpu/mpc5xxx/cpu_init.c @@ -53,10 +53,6 @@ void cpu_init_f (void) (struct mpc5xxx_gpt *) MPC5XXX_GPT; #endif /* CONFIG_WATCHDOG */ unsigned long addecr = (1 << 25); /* Boot_CS */ - -#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_MGT5100) - addecr |= (1 << 22); /* SDRAM enable */ -#endif /* Pointer is writable since we allocated a register for it */ gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); @@ -136,7 +132,6 @@ void cpu_init_f (void) out_be32(&lpb->cs5_cfg, CONFIG_SYS_CS5_CFG); #endif -#if defined(CONFIG_MPC5200) addecr |= 1; #if defined(CONFIG_SYS_CS6_START) && defined(CONFIG_SYS_CS6_SIZE) out_be32(&mm->cs6_start, START_REG(CONFIG_SYS_CS6_START)); @@ -164,14 +159,9 @@ void cpu_init_f (void) #if defined(CONFIG_SYS_CS_DEADCYCLE) out_be32(&lpb->cs_deadcycle, CONFIG_SYS_CS_DEADCYCLE); #endif -#endif /* CONFIG_MPC5200 */ /* Enable chip selects */ -#if defined(CONFIG_MGT5100) - out_be32(&mm->addecr, addecr); -#elif defined(CONFIG_MPC5200) out_be32(&mm->ipbi_ws_ctrl, addecr); -#endif out_be32(&lpb->cs_ctrl, (1 << 24)); /* Setup pin multiplexing */ @@ -179,7 +169,6 @@ void cpu_init_f (void) out_be32(&gpio->port_config, CONFIG_SYS_GPS_PORT_CONFIG); #endif -#if defined(CONFIG_MPC5200) /* enable timebase */ setbits_be32(&xlb->config, (1 << 13)); @@ -187,33 +176,29 @@ void cpu_init_f (void) setbits_be32(&xlb->config, (1 << 15)); out_be32(&xlb->snoop_window, CONFIG_SYS_SDRAM_BASE | 0x1d); -# if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK) +#if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK) /* Motorola reports IPB should better run at 133 MHz. */ -# if defined(CONFIG_MGT5100) - setbits_be32(&mm->addecr, 1); -# elif defined(CONFIG_MPC5200) setbits_be32(&mm->ipbi_ws_ctrl, 1); -# endif /* pci_clk_sel = 0x02, ipb_clk_sel = 0x00; */ addecr = in_be32(&cdm->cfg); addecr &= ~0x103; -# if defined(CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2) +# if defined(CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2) /* pci_clk_sel = 0x01 -> IPB_CLK/2 */ addecr |= 0x01; -# else +# else /* pci_clk_sel = 0x02 -> XLB_CLK/4 = IPB_CLK/4 */ addecr |= 0x02; -# endif /* CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 */ +# endif /* CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 */ out_be32(&cdm->cfg, addecr); -# endif /* CONFIG_SYS_IPBCLK_EQUALS_XLBCLK */ +#endif /* CONFIG_SYS_IPBCLK_EQUALS_XLBCLK */ /* Configure the XLB Arbiter */ out_be32(&xlb->master_pri_enable, 0xff); out_be32(&xlb->master_priority, 0x11111111); -# if defined(CONFIG_SYS_XLB_PIPELINING) +#if defined(CONFIG_SYS_XLB_PIPELINING) /* Enable piplining */ clrbits_be32(&xlb->config, (1 << 31)); -# endif +#endif #if defined(CONFIG_WATCHDOG) /* Charge the watchdog timer - prescaler = 64k, count = 64k*/ @@ -222,8 +207,6 @@ void cpu_init_f (void) reset_5xxx_watchdog(); #endif /* CONFIG_WATCHDOG */ - -#endif /* CONFIG_MPC5200 */ } /* @@ -235,11 +218,7 @@ int cpu_init_r (void) (struct mpc5xxx_intr *) MPC5XXX_ICTL; /* mask all interrupts */ -#if defined(CONFIG_MGT5100) - out_be32(&intr->per_mask, 0xfffffc00); -#elif defined(CONFIG_MPC5200) out_be32(&intr->per_mask, 0xffffff00); -#endif setbits_be32(&intr->main_mask, 0x0001ffff); clrbits_be32(&intr->ctrl, 0x00000f00); /* route critical ints to normal ints */ diff --git a/cpu/mpc5xxx/firmware_sc_task.impl.S b/cpu/mpc5xxx/firmware_sc_task.impl.S deleted file mode 100644 index b668ee5cf8d..00000000000 --- a/cpu/mpc5xxx/firmware_sc_task.impl.S +++ /dev/null @@ -1,364 +0,0 @@ -/* - * Copyright (C) 2001, Software Center, Motorola China. - * - * This file contains microcode for the FEC controller of the MGT5100 CPU. - */ - -#include - -#if defined(CONFIG_MGT5100) - -/* sas/sccg, gas target */ -.section smartdmaInitData,"aw",@progbits /* Initialized data for task variables */ -.section smartdmaTaskTable,"aw",@progbits /* Task tables */ -.globl taskTable -taskTable: -.globl scEthernetRecv_Entry -scEthernetRecv_Entry: /* Task 0 */ -.long scEthernetRecv_TDT - taskTable /* Task 0 Descriptor Table */ -.long scEthernetRecv_TDT - taskTable + 0x000000a4 -.long scEthernetRecv_VarTab - taskTable /* Task 0 Variable Table */ -.long scEthernetRecv_FDT - taskTable + 0x03 /* Task 0 Function Descriptor Table & Flags */ -.long 0x00000000 -.long 0x00000000 -.long scEthernetRecv_CSave - taskTable /* Task 0 context save space */ -.long 0xf0000000 -.globl scEthernetXmit_Entry -scEthernetXmit_Entry: /* Task 1 */ -.long scEthernetXmit_TDT - taskTable /* Task 1 Descriptor Table */ -.long scEthernetXmit_TDT - taskTable + 0x000000d0 -.long scEthernetXmit_VarTab - taskTable /* Task 1 Variable Table */ -.long scEthernetXmit_FDT - taskTable + 0x03 /* Task 1 Function Descriptor Table & Flags */ -.long 0x00000000 -.long 0x00000000 -.long scEthernetXmit_CSave - taskTable /* Task 1 context save space */ -.long 0xf0000000 - - -.globl scEthernetRecv_TDT -scEthernetRecv_TDT: /* Task 0 Descriptor Table */ -.long 0xc4c50000 /* 0000: LCDEXT: idx0 = var9 + var10; idx0 once var0; idx0 += inc0 */ -.long 0x84c5e000 /* 0004: LCD: idx1 = var9 + var11; ; idx1 += inc0 */ -.long 0x10001f08 /* 0008: DRD1A: var7 = idx1; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x10000380 /* 000C: DRD1A: var0 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x00000f88 /* 0010: DRD1A: var3 = *idx1; FN=0 init=0 WS=0 RS=0 */ -.long 0x81980000 /* 0014: LCD: idx0 = var3; idx0 once var0; idx0 += inc0 */ -.long 0x10000780 /* 0018: DRD1A: var1 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x60000000 /* 001C: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */ -.long 0x010c504c /* 0020: DRD2B1: var4 = EU1(); EU1(var1,var12) */ -.long 0x82180349 /* 0024: LCD: idx0 = var4; idx0 != var13; idx0 += inc1 */ -.long 0x81c68004 /* 0028: LCD: idx1 = var3 + var13 + 4; idx1 once var0; idx1 += inc0 */ -.long 0x70000000 /* 002C: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */ -.long 0x018c504e /* 0030: DRD2B1: var6 = EU1(); EU1(var1,var14) */ -.long 0x70000000 /* 0034: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */ -.long 0x020c504f /* 0038: DRD2B1: var8 = EU1(); EU1(var1,var15) */ -.long 0x00000b88 /* 003C: DRD1A: var2 = *idx1; FN=0 init=0 WS=0 RS=0 */ -.long 0x8000d184 /* 0040: LCDEXT: idx1 = 0xf0003184; ; */ -.long 0xc6990452 /* 0044: LCDEXT: idx2 = var13; idx2 < var17; idx2 += inc2 */ -.long 0x81486010 /* 0048: LCD: idx3 = var2 + var16; ; idx3 += inc2 */ -.long 0x006acf88 /* 004C: DRD1A: *idx3 = *idx1; FN=0 init=3 WS=1 RS=1 */ -.long 0x8000d184 /* 0050: LCDEXT: idx1 = 0xf0003184; ; */ -.long 0x86810492 /* 0054: LCD: idx2 = var13, idx3 = var2; idx2 < var18; idx2 += inc2, idx3 += inc2 */ -.long 0x006acf88 /* 0058: DRD1A: *idx3 = *idx1; FN=0 init=3 WS=1 RS=1 */ -.long 0x8000d184 /* 005C: LCDEXT: idx1 = 0xf0003184; ; */ -.long 0x868184d2 /* 0060: LCD: idx2 = var13, idx3 = var3; idx2 < var19; idx2 += inc2, idx3 += inc2 */ -.long 0x000acf88 /* 0064: DRD1A: *idx3 = *idx1; FN=0 init=0 WS=1 RS=1 */ -.long 0xc318839b /* 0068: LCDEXT: idx1 = var6; idx1 == var14; idx1 += inc3 */ -.long 0x80190000 /* 006C: LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */ -.long 0x04008468 /* 0070: DRD1A: idx1 = var13; FN=0 INT init=0 WS=0 RS=0 */ -.long 0xc4038358 /* 0074: LCDEXT: idx1 = var8, idx2 = var7; idx1 == var13; idx1 += inc3, idx2 += inc0 */ -.long 0x81c50000 /* 0078: LCD: idx3 = var3 + var10; idx3 once var0; idx3 += inc0 */ -.long 0x1000cb18 /* 007C: DRD1A: *idx2 = idx3; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x00000f18 /* 0080: DRD1A: var3 = idx3; FN=0 init=0 WS=0 RS=0 */ -.long 0xc4188364 /* 0084: LCDEXT: idx1 = var8; idx1 > var13; idx1 += inc4 */ -.long 0x83990000 /* 0088: LCD: idx2 = var7; idx2 once var0; idx2 += inc0 */ -.long 0x10000c00 /* 008C: DRD1A: var3 = var0; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x0000c800 /* 0090: DRD1A: *idx2 = var0; FN=0 init=0 WS=0 RS=0 */ -.long 0x81988000 /* 0094: LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */ -.long 0x10000788 /* 0098: DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x60000000 /* 009C: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */ -.long 0x080c504c /* 00A0: DRD2B1: idx0 = EU1(); EU1(var1,var12) */ -.long 0x000001f8 /* 00A4(:0): NOP */ - - -.globl scEthernetXmit_TDT -scEthernetXmit_TDT: /* Task 1 Descriptor Table */ -.long 0x80014800 /* 0000: LCDEXT: idx0 = 0xf0004800; ; */ -.long 0x85c60004 /* 0004: LCD: idx1 = var11 + var12 + 4; idx1 once var0; idx1 += inc0 */ -.long 0x10002308 /* 0008: DRD1A: var8 = idx1; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x10000f88 /* 000C: DRD1A: var3 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x00000380 /* 0010: DRD1A: var0 = *idx0; FN=0 init=0 WS=0 RS=0 */ -.long 0x81980000 /* 0014: LCD: idx0 = var3; idx0 once var0; idx0 += inc0 */ -.long 0x10000780 /* 0018: DRD1A: var1 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x60000000 /* 001C: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */ -.long 0x024c504d /* 0020: DRD2B1: var9 = EU1(); EU1(var1,var13) */ -.long 0x84980309 /* 0024: LCD: idx0 = var9; idx0 != var12; idx0 += inc1 */ -.long 0xc0004003 /* 0028: LCDEXT: idx1 = 0x00000003; ; */ -.long 0x81c60004 /* 002C: LCD: idx2 = var3 + var12 + 4; idx2 once var0; idx2 += inc0 */ -.long 0x70000000 /* 0030: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */ -.long 0x010c504e /* 0034: DRD2B1: var4 = EU1(); EU1(var1,var14) */ -.long 0x70000000 /* 0038: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */ -.long 0x014c504f /* 003C: DRD2B1: var5 = EU1(); EU1(var1,var15) */ -.long 0x70000000 /* 0040: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */ -.long 0x028c5050 /* 0044: DRD2B1: var10 = EU1(); EU1(var1,var16) */ -.long 0x70000000 /* 0048: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */ -.long 0x018c5051 /* 004C: DRD2B1: var6 = EU1(); EU1(var1,var17) */ -.long 0x10000b90 /* 0050: DRD1A: var2 = *idx2; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x60000000 /* 0054: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */ -.long 0x01cc50a1 /* 0058: DRD2B1: var7 = EU1(); EU1(var2,idx1) */ -.long 0xc2988312 /* 005C: LCDEXT: idx1 = var5; idx1 > var12; idx1 += inc2 */ -.long 0x83490000 /* 0060: LCD: idx2 = var6 + var18; idx2 once var0; idx2 += inc0 */ -.long 0x00001b10 /* 0064: DRD1A: var6 = idx2; FN=0 init=0 WS=0 RS=0 */ -.long 0x8000d1a4 /* 0068: LCDEXT: idx1 = 0xf00031a4; ; */ -.long 0x8301031c /* 006C: LCD: idx2 = var6, idx3 = var2; idx2 > var12; idx2 += inc3, idx3 += inc4 */ -.long 0x008ac798 /* 0070: DRD1A: *idx1 = *idx3; FN=0 init=4 WS=1 RS=1 */ -.long 0x8000d1a4 /* 0074: LCDEXT: idx1 = 0xf00031a4; ; */ -.long 0xc1430000 /* 0078: LCDEXT: idx2 = var2 + var6; idx2 once var0; idx2 += inc0 */ -.long 0x82998312 /* 007C: LCD: idx3 = var5; idx3 > var12; idx3 += inc2 */ -.long 0x088ac790 /* 0080: DRD1A: *idx1 = *idx2; FN=0 TFD init=4 WS=1 RS=1 */ -.long 0x81988000 /* 0084: LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */ -.long 0x60000100 /* 0088: DRD2A: EU0=0 EU1=1 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */ -.long 0x0c4c5c4d /* 008C: DRD2B1: *idx1 = EU1(); EU1(*idx1,var13) */ -.long 0xc21883ad /* 0090: LCDEXT: idx1 = var4; idx1 == var14; idx1 += inc5 */ -.long 0x80190000 /* 0094: LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */ -.long 0x04008460 /* 0098: DRD1A: idx1 = var12; FN=0 INT init=0 WS=0 RS=0 */ -.long 0xc4052305 /* 009C: LCDEXT: idx1 = var8, idx2 = var10; idx2 == var12; idx1 += inc0, idx2 += inc5 */ -.long 0x81c98000 /* 00A0: LCD: idx3 = var3 + var19; idx3 once var0; idx3 += inc0 */ -.long 0x1000c718 /* 00A4: DRD1A: *idx1 = idx3; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x00000f18 /* 00A8: DRD1A: var3 = idx3; FN=0 init=0 WS=0 RS=0 */ -.long 0xc4188000 /* 00AC: LCDEXT: idx1 = var8; idx1 once var0; idx1 += inc0 */ -.long 0x85190312 /* 00B0: LCD: idx2 = var10; idx2 > var12; idx2 += inc2 */ -.long 0x10000c00 /* 00B4: DRD1A: var3 = var0; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x1000c400 /* 00B8: DRD1A: *idx1 = var0; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x00008860 /* 00BC: DRD1A: idx2 = var12; FN=0 init=0 WS=0 RS=0 */ -.long 0x81988000 /* 00C0: LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */ -.long 0x10000788 /* 00C4: DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x60000000 /* 00C8: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */ -.long 0x080c504d /* 00CC: DRD2B1: idx0 = EU1(); EU1(var1,var13) */ -.long 0x000001f8 /* 00D0(:0): NOP */ - -.align 8 - -.globl scEthernetRecv_VarTab -scEthernetRecv_VarTab: /* Task 0 Variable Table */ -.long 0x00000000 /* var[0] */ -.long 0x00000000 /* var[1] */ -.long 0x00000000 /* var[2] */ -.long 0x00000000 /* var[3] */ -.long 0x00000000 /* var[4] */ -.long 0x00000000 /* var[5] */ -.long 0x00000000 /* var[6] */ -.long 0x00000000 /* var[7] */ -.long 0x00000000 /* var[8] */ -.long 0xf0004800 /* var[9] */ -.long 0x00000008 /* var[10] */ -.long 0x0000000c /* var[11] */ -.long 0x80000000 /* var[12] */ -.long 0x00000000 /* var[13] */ -.long 0x10000000 /* var[14] */ -.long 0x20000000 /* var[15] */ -.long 0x000005e4 /* var[16] */ -.long 0x0000000e /* var[17] */ -.long 0x000005e0 /* var[18] */ -.long 0x00000004 /* var[19] */ -.long 0x00000000 /* var[20] */ -.long 0x00000000 /* var[21] */ -.long 0x00000000 /* var[22] */ -.long 0x00000000 /* var[23] */ -.long 0x00000000 /* inc[0] */ -.long 0x60000000 /* inc[1] */ -.long 0x20000001 /* inc[2] */ -.long 0x80000000 /* inc[3] */ -.long 0x40000000 /* inc[4] */ -.long 0x00000000 /* inc[5] */ -.long 0x00000000 /* inc[6] */ -.long 0x00000000 /* inc[7] */ - -.align 8 - -.globl scEthernetXmit_VarTab -scEthernetXmit_VarTab: /* Task 1 Variable Table */ -.long 0x00000000 /* var[0] */ -.long 0x00000000 /* var[1] */ -.long 0x00000000 /* var[2] */ -.long 0x00000000 /* var[3] */ -.long 0x00000000 /* var[4] */ -.long 0x00000000 /* var[5] */ -.long 0x00000000 /* var[6] */ -.long 0x00000000 /* var[7] */ -.long 0x00000000 /* var[8] */ -.long 0x00000000 /* var[9] */ -.long 0x00000000 /* var[10] */ -.long 0xf0004800 /* var[11] */ -.long 0x00000000 /* var[12] */ -.long 0x80000000 /* var[13] */ -.long 0x10000000 /* var[14] */ -.long 0x08000000 /* var[15] */ -.long 0x20000000 /* var[16] */ -.long 0x0000ffff /* var[17] */ -.long 0xffffffff /* var[18] */ -.long 0x00000008 /* var[19] */ -.long 0x00000000 /* var[20] */ -.long 0x00000000 /* var[21] */ -.long 0x00000000 /* var[22] */ -.long 0x00000000 /* var[23] */ -.long 0x00000000 /* inc[0] */ -.long 0x60000000 /* inc[1] */ -.long 0x40000000 /* inc[2] */ -.long 0x4000ffff /* inc[3] */ -.long 0xe0000001 /* inc[4] */ -.long 0x80000000 /* inc[5] */ -.long 0x00000000 /* inc[6] */ -.long 0x00000000 /* inc[7] */ - -.align 8 - -.globl scEthernetRecv_FDT -scEthernetRecv_FDT: /* Task 0 Function Descriptor Table */ -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x05800000 /* and(), EU# 1 */ -.long 0x05400000 /* andn(), EU# 1 */ -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 - -.align 8 - -.globl scEthernetXmit_FDT -scEthernetXmit_FDT: /* Task 1 Function Descriptor Table */ -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x05800000 /* and(), EU# 1 */ -.long 0x05400000 /* andn(), EU# 1 */ -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 - - -.align 8 -.globl scEthernetRecv_CSave -scEthernetRecv_CSave: /* Task 0 context save space */ -.space 256, 0x0 - - -.align 8 -.globl scEthernetXmit_CSave -scEthernetXmit_CSave: /* Task 1 context save space */ -.space 256, 0x0 - -#endif /* CONFIG_MGT5100 */ diff --git a/cpu/mpc5xxx/firmware_sc_task_bestcomm.impl.S b/cpu/mpc5xxx/firmware_sc_task_bestcomm.impl.S index d140c7e9892..00c23121ac8 100644 --- a/cpu/mpc5xxx/firmware_sc_task_bestcomm.impl.S +++ b/cpu/mpc5xxx/firmware_sc_task_bestcomm.impl.S @@ -6,8 +6,6 @@ #include -#if defined(CONFIG_MPC5200) - /* sas/sccg, gas target */ .section smartdmaInitData,"aw",@progbits /* Initialized data for task variables */ .section smartdmaTaskTable,"aw",@progbits /* Task tables */ @@ -359,5 +357,3 @@ scEthernetRecv_CSave: /* Task 0 context save space */ .globl scEthernetXmit_CSave scEthernetXmit_CSave: /* Task 1 context save space */ .space 128, 0x0 - -#endif /* CONFIG_MPC5200 */ diff --git a/cpu/mpc5xxx/pci_mpc5200.c b/cpu/mpc5xxx/pci_mpc5200.c index 225738a0731..8268f8afe19 100644 --- a/cpu/mpc5xxx/pci_mpc5200.c +++ b/cpu/mpc5xxx/pci_mpc5200.c @@ -23,7 +23,7 @@ #include -#if defined(CONFIG_PCI) && defined(CONFIG_MPC5200) +#if defined(CONFIG_PCI) #include #include @@ -184,4 +184,4 @@ void pci_mpc5xxx_init (struct pci_controller *hose) hose->last_busno = pci_hose_scan(hose); } -#endif /* CONFIG_PCI && CONFIG_MPC5200 */ +#endif /* CONFIG_PCI */ diff --git a/cpu/mpc5xxx/serial.c b/cpu/mpc5xxx/serial.c index a8a384aa58b..66759887c66 100644 --- a/cpu/mpc5xxx/serial.c +++ b/cpu/mpc5xxx/serial.c @@ -50,8 +50,6 @@ DECLARE_GLOBAL_DATA_PTR; #define PSC_BASE MPC5XXX_PSC2 #elif CONFIG_PSC_CONSOLE == 3 #define PSC_BASE MPC5XXX_PSC3 -#elif defined(CONFIG_MGT5100) -#error CONFIG_PSC_CONSOLE must be in 1, 2 or 3 #elif CONFIG_PSC_CONSOLE == 4 #define PSC_BASE MPC5XXX_PSC4 #elif CONFIG_PSC_CONSOLE == 5 @@ -73,8 +71,6 @@ DECLARE_GLOBAL_DATA_PTR; #define PSC_BASE2 MPC5XXX_PSC2 #elif CONFIG_PSC_CONSOLE2 == 3 #define PSC_BASE2 MPC5XXX_PSC3 -#elif defined(CONFIG_MGT5100) -#error CONFIG_PSC_CONSOLE2 must be in 1, 2 or 3 #elif CONFIG_PSC_CONSOLE2 == 4 #define PSC_BASE2 MPC5XXX_PSC4 #elif CONFIG_PSC_CONSOLE2 == 5 @@ -104,23 +100,14 @@ int serial_init (void) psc->command = PSC_SEL_MODE_REG_1; /* select clock sources */ -#if defined(CONFIG_MGT5100) - psc->psc_clock_select = 0xdd00; - baseclk = (CONFIG_SYS_MPC5XXX_CLKIN + 16) / 32; -#elif defined(CONFIG_MPC5200) psc->psc_clock_select = 0; baseclk = (gd->ipb_clk + 16) / 32; -#endif /* switch to UART mode */ psc->sicr = 0; /* configure parity, bit length and so on */ -#if defined(CONFIG_MGT5100) - psc->mode = PSC_MODE_ERR | PSC_MODE_8_BITS | PSC_MODE_PARNONE; -#elif defined(CONFIG_MPC5200) psc->mode = PSC_MODE_8_BITS | PSC_MODE_PARNONE; -#endif psc->mode = PSC_MODE_ONE_STOP; /* set up UART divisor */ @@ -246,11 +233,7 @@ void serial_setbrg(void) #endif unsigned long baseclk, div; -#if defined(CONFIG_MGT5100) - baseclk = (CONFIG_SYS_MPC5XXX_CLKIN + 16) / 32; -#elif defined(CONFIG_MPC5200) baseclk = (gd->ipb_clk + 16) / 32; -#endif /* set up UART divisor */ div = (baseclk + (gd->baudrate/2)) / gd->baudrate; diff --git a/cpu/mpc5xxx/start.S b/cpu/mpc5xxx/start.S index d499da5036a..ba499442107 100644 --- a/cpu/mpc5xxx/start.S +++ b/cpu/mpc5xxx/start.S @@ -111,9 +111,6 @@ boot_warm: # if defined(CONFIG_SYS_RAMBOOT) # error CONFIG_SYS_LOWBOOT is incompatible with CONFIG_SYS_RAMBOOT # endif /* CONFIG_SYS_RAMBOOT */ -# if defined(CONFIG_MGT5100) -# error CONFIG_SYS_LOWBOOT is incompatible with MGT5100 -# endif /* CONFIG_MGT5100 */ lis r4, CONFIG_SYS_DEFAULT_MBAR@h lis r3, START_REG(CONFIG_SYS_BOOTCS_START)@h ori r3, r3, START_REG(CONFIG_SYS_BOOTCS_START)@l @@ -145,14 +142,9 @@ lowboot_reentry: #if defined(CONFIG_SYS_DEFAULT_MBAR) && !defined(CONFIG_SYS_RAMBOOT) lis r3, CONFIG_SYS_MBAR@h ori r3, r3, CONFIG_SYS_MBAR@l -#if defined(CONFIG_MPC5200) /* MBAR is mirrored into the MBAR SPR */ mtspr MBAR,r3 rlwinm r3, r3, 16, 16, 31 -#endif -#if defined(CONFIG_MGT5100) - rlwinm r3, r3, 17, 15, 31 -#endif lis r4, CONFIG_SYS_DEFAULT_MBAR@h stw r3, 0(r4) #endif /* CONFIG_SYS_DEFAULT_MBAR */ diff --git a/cpu/mpc5xxx/usb_ohci.c b/cpu/mpc5xxx/usb_ohci.c index 66a4af8d8e5..7976e4df7d8 100644 --- a/cpu/mpc5xxx/usb_ohci.c +++ b/cpu/mpc5xxx/usb_ohci.c @@ -76,13 +76,8 @@ #define m16_swap(x) swap_16(x) #define m32_swap(x) swap_32(x) -#ifdef CONFIG_MPC5200 #define ohci_cpu_to_le16(x) (x) #define ohci_cpu_to_le32(x) (x) -#else -#define ohci_cpu_to_le16(x) swap_16(x) -#define ohci_cpu_to_le32(x) swap_32(x) -#endif /* global ohci_t */ static ohci_t gohci; @@ -803,9 +798,7 @@ static td_t * dl_reverse_done_list (ohci_t *ohci) } else td_list->ed->hwHeadP &= ohci_cpu_to_le32 (0xfffffff2); } -#ifdef CONFIG_MPC5200 td_list->hwNextTD = 0; -#endif } td_list->next_dl_td = td_rev; diff --git a/cpu/mpc5xxx/usb_ohci.h b/cpu/mpc5xxx/usb_ohci.h index 6eedbdd1d9f..629b529a695 100644 --- a/cpu/mpc5xxx/usb_ohci.h +++ b/cpu/mpc5xxx/usb_ohci.h @@ -127,13 +127,8 @@ typedef struct td td_t; #define NUM_INTS 32 /* part of the OHCI standard */ struct ohci_hcca { __u32 int_table[NUM_INTS]; /* Interrupt ED table */ -#if defined(CONFIG_MPC5200) __u16 pad1; /* set to 0 on each frame_no change */ __u16 frame_no; /* current frame number */ -#else - __u16 frame_no; /* current frame number */ - __u16 pad1; /* set to 0 on each frame_no change */ -#endif __u32 done_head; /* info returned for an interrupt */ u8 reserved_for_hc[116]; } __attribute__((aligned(256))); -- cgit v1.3.1 From a6a04967bc2957d20799f4bb2a6b3dd0353c1cfd Mon Sep 17 00:00:00 2001 From: Renato Andreola Date: Tue, 16 Mar 2010 16:01:29 -0400 Subject: nios2: Added support to YANU UART Signed-off-by: Scott McNutt --- cpu/nios2/serial.c | 168 ++++++++++++++++++++++++++++++++++++++++++++++++++- include/nios2-yanu.h | 115 +++++++++++++++++++++++++++++++++++ 2 files changed, 282 insertions(+), 1 deletion(-) create mode 100644 include/nios2-yanu.h (limited to 'cpu') diff --git a/cpu/nios2/serial.c b/cpu/nios2/serial.c index 8bbb803a689..6c835af4b1b 100644 --- a/cpu/nios2/serial.c +++ b/cpu/nios2/serial.c @@ -2,6 +2,9 @@ * (C) Copyright 2004, Psyent Corporation * Scott McNutt * + * YANU Support: + * Copyright 2010, Renato Andreola + * * See file CREDITS for list of people who contributed to this * project. * @@ -26,6 +29,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -74,10 +78,172 @@ int serial_getc (void) return (c); } +#elif defined(CONFIG_CONSOLE_YANU) +/*-----------------------------------------------------------------*/ +/* YANU Imagos serial port */ +/*-----------------------------------------------------------------*/ + +static yanu_uart_t *uart = (yanu_uart_t *)CONFIG_SYS_NIOS_CONSOLE; + +#if defined(CONFIG_SYS_NIOS_FIXEDBAUD) + +/* Everything's already setup for fixed-baud PTF assignment*/ + +void serial_setbrg (void) +{ + int n, k; + const unsigned max_uns = 0xFFFFFFFF; + unsigned best_n, best_m, baud; + + /* compute best N and M couple */ + best_n = YANU_MAX_PRESCALER_N; + for (n = YANU_MAX_PRESCALER_N; n >= 0; n--) { + if ((unsigned)CONFIG_SYS_CLK_FREQ / (1 << (n + 4)) >= + (unsigned)CONFIG_BAUDRATE) { + best_n = n; + break; + } + } + for (k = 0;; k++) { + if ((unsigned)CONFIG_BAUDRATE <= (max_uns >> (15+n-k))) + break; + } + best_m = + ((unsigned)CONFIG_BAUDRATE * (1 << (15 + n - k))) / + ((unsigned)CONFIG_SYS_CLK_FREQ >> k); + + baud = best_m + best_n * YANU_BAUDE; + writel(&uart->baud, baud); + + return; +} + +#else + +void serial_setbrg (void) +{ + int n, k; + const unsigned max_uns = 0xFFFFFFFF; + unsigned best_n, best_m, baud; + + /* compute best N and M couple */ + best_n = YANU_MAX_PRESCALER_N; + for (n = YANU_MAX_PRESCALER_N; n >= 0; n--) { + if ((unsigned)CONFIG_SYS_CLK_FREQ / (1 << (n + 4)) >= + gd->baudrate) { + best_n = n; + break; + } + } + for (k = 0;; k++) { + if (gd->baudrate <= (max_uns >> (15+n-k))) + break; + } + best_m = + (gd->baudrate * (1 << (15 + n - k))) / + ((unsigned)CONFIG_SYS_CLK_FREQ >> k); + + baud = best_m + best_n * YANU_BAUDE; + writel(&uart->baud, baud); + + return; +} + + +#endif /* CONFIG_SYS_NIOS_FIXEDBAUD */ + +int serial_init (void) +{ + unsigned action,control; + + /* status register cleanup */ + action = YANU_ACTION_RRRDY | + YANU_ACTION_RTRDY | + YANU_ACTION_ROE | + YANU_ACTION_RBRK | + YANU_ACTION_RFE | + YANU_ACTION_RPE | + YANU_ACTION_RFE | YANU_ACTION_RFIFO_CLEAR | YANU_ACTION_TFIFO_CLEAR; + + writel(&uart->action, action); + + /* control register cleanup */ + /* no interrupts enabled */ + /* one stop bit */ + /* hardware flow control disabled */ + /* 8 bits */ + control = (0x7 << YANU_CONTROL_BITS_POS); + /* enven parity just to be clean */ + control |= YANU_CONTROL_PAREVEN; + /* we set threshold for fifo */ + control |= YANU_CONTROL_RDYDLY * YANU_RXFIFO_DLY; + control |= YANU_CONTROL_TXTHR * YANU_TXFIFO_THR; + + writel(&uart->control, control); + + /* to set baud rate */ + serial_setbrg(); + + return (0); +} + + +/*----------------------------------------------------------------------- + * YANU CONSOLE + *---------------------------------------------------------------------*/ +void serial_putc (char c) +{ + int tx_chars; + unsigned status; + + if (c == '\n') + serial_putc ('\r'); + + while (1) { + status = readl(&uart->status); + tx_chars = (status>>YANU_TFIFO_CHARS_POS) + & ((1<data, (unsigned char)c); +} + +void serial_puts (const char *s) +{ + while (*s != 0) { + serial_putc (*s++); + } +} + + +int serial_tstc(void) +{ + unsigned status ; + + status = readl(&uart->status); + return (((status >> YANU_RFIFO_CHARS_POS) & + ((1 << YANU_RFIFO_CHARS_N) - 1)) > 0); +} + +int serial_getc (void) +{ + while (serial_tstc() == 0) + WATCHDOG_RESET (); + + /* first we pull the char */ + writel(&uart->action, YANU_ACTION_RFIFO_PULL); + + return(readl(&uart->data) & YANU_DATA_CHAR_MASK); +} + +#else /*CONFIG_CONSOLE_YANU*/ + /*------------------------------------------------------------------ * UART the serial port *-----------------------------------------------------------------*/ -#else static nios_uart_t *uart = (nios_uart_t *) CONFIG_SYS_NIOS_CONSOLE; diff --git a/include/nios2-yanu.h b/include/nios2-yanu.h new file mode 100644 index 00000000000..1c9a967932d --- /dev/null +++ b/include/nios2-yanu.h @@ -0,0 +1,115 @@ +/* + * (C) Copyright 2006, Imagos S.a.s + * Renato Andreola + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************* + * Altera NiosII YANU serial interface by Imagos + * please see http://www.opencores.org/project,yanu for + * information/downloads + ************************************************************************/ + +#ifndef __NIOS2_YANU_H__ +#define __NIOS2_YANU_H__ + +#define YANU_MAX_PRESCALER_N ((1 << 4) - 1) /* 15 */ +#define YANU_MAX_PRESCALER_M ((1 << 11) -1) /* 2047 */ +#define YANU_FIFO_SIZE (16) +#define YANU_RXFIFO_SIZE (YANU_FIFO_SIZE) +#define YANU_TXFIFO_SIZE (YANU_FIFO_SIZE) + +#define YANU_RXFIFO_DLY (10*11) +#define YANU_TXFIFO_THR (10) +#define YANU_DATA_CHAR_MASK (0xFF) + +/* data register */ +#define YANU_DATA_OFFSET (0) /* data register offset */ + +#define YANU_CONTROL_OFFSET (4) /* control register offset */ +/* interrupt enable */ +#define YANU_CONTROL_IE_RRDY (1<<0) /* ie on received character ready */ +#define YANU_CONTROL_IE_OE (1<<1) /* ie on rx overrun */ +#define YANU_CONTROL_IE_BRK (1<<2) /* ie on break detect */ +#define YANU_CONTROL_IE_FE (1<<3) /* ie on framing error */ +#define YANU_CONTROL_IE_PE (1<<4) /* ie on parity error */ +#define YANU_CONTROL_IE_TRDY (1<<5) /* ie interrupt on tranmitter ready */ +/* control bits */ +#define YANU_CONTROL_BITS_POS (6) /* bits number pos */ +#define YANU_CONTROL_BITS (1< Date: Wed, 20 Jan 2010 19:33:02 -0600 Subject: Adding EP2500 MCF5282 board [PATCH] Mercury-EP2500.patch - added Mercury's EP2500 board uses the mcf5282 processor CREDITS.patch Signed-off-by: David Wu Signed-off-by: Michael Durrant --- CREDITS | 5 +++++ Makefile | 3 +++ cpu/mcf52x2/cpu_init.c | 11 +++++++++++ 3 files changed, 19 insertions(+) (limited to 'cpu') diff --git a/CREDITS b/CREDITS index 2471029fc5e..043ba6e13bf 100644 --- a/CREDITS +++ b/CREDITS @@ -511,6 +511,11 @@ N: Martin Winistoerfer E: martinwinistoerfer@gmx.ch D: Port to MPC555/556 microcontrollers and support for cmi board +N: David Wu +E: support@arcturusnetworks.com +D: Mercury Security EP2500 +W: http://www.arcturusnetworks.com + N: Ming-Len Wu E: minglen_wu@techware.com.tw D: Motorola MX1ADS board support diff --git a/Makefile b/Makefile index e004303a810..804430234c7 100644 --- a/Makefile +++ b/Makefile @@ -2048,6 +2048,9 @@ EB+MCF-EV123_internal_config : unconfig @echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS +EP2500_config: unconfig + @$(MKCONFIG) $(@:_config=) m68k mcf52x2 ep2500 Mercury + idmr_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 idmr diff --git a/cpu/mcf52x2/cpu_init.c b/cpu/mcf52x2/cpu_init.c index 7cea6558fdd..5b06930df80 100644 --- a/cpu/mcf52x2/cpu_init.c +++ b/cpu/mcf52x2/cpu_init.c @@ -5,6 +5,8 @@ * MCF5282 additionals * (C) Copyright 2005 * BuS Elektronik GmbH & Co. KG + * (c) Copyright 2010 + * Arcturus Networks Inc. * * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. * TsiChung Liew (Tsi-Chung.Liew@freescale.com) @@ -582,6 +584,12 @@ void cpu_init_f(void) #ifdef CONFIG_SYS_PTCPAR MCFGPIO_PTCPAR = CONFIG_SYS_PTCPAR; #endif +#if defined(CONFIG_SYS_PORTTC) + MCFGPIO_PORTTC = CONFIG_SYS_PORTTC; +#endif +#if defined(CONFIG_SYS_DDRTC) + MCFGPIO_DDRTC = CONFIG_SYS_DDRTC; +#endif #ifdef CONFIG_SYS_PTDPAR MCFGPIO_PTDPAR = CONFIG_SYS_PTDPAR; #endif @@ -589,6 +597,9 @@ void cpu_init_f(void) MCFGPIO_PUAPAR = CONFIG_SYS_PUAPAR; #endif +#if defined(CONFIG_SYS_DDRD) + MCFGPIO_DDRD = CONFIG_SYS_DDRD; +#endif #ifdef CONFIG_SYS_DDRUA MCFGPIO_DDRUA = CONFIG_SYS_DDRUA; #endif -- cgit v1.3.1 From d04c1efae3d834db6e21e9976e338bf1e588e987 Mon Sep 17 00:00:00 2001 From: TsiChung Liew Date: Tue, 9 Mar 2010 18:32:16 -0600 Subject: ColdFire: Correct bit definition Use correct definition for _MASK and _UNMASK. It was combined in the previous used and causes confusion. Signed-off-by: TsiChung Liew --- board/freescale/m54455evb/m54455evb.c | 2 +- cpu/mcf5227x/cpu_init.c | 12 ++-- cpu/mcf52x2/cpu_init.c | 14 ++--- cpu/mcf532x/cpu_init.c | 12 ++-- cpu/mcf532x/speed.c | 2 +- cpu/mcf5445x/cpu_init.c | 4 +- include/asm-m68k/m520x.h | 89 +++++++++++++-------------- include/asm-m68k/m5227x.h | 108 ++++++++++++++++---------------- include/asm-m68k/m5235.h | 4 +- include/asm-m68k/m5301x.h | 112 +++++++++++++++++----------------- include/asm-m68k/m5445x.h | 56 ++++++++--------- 11 files changed, 206 insertions(+), 209 deletions(-) (limited to 'cpu') diff --git a/board/freescale/m54455evb/m54455evb.c b/board/freescale/m54455evb/m54455evb.c index 293b5b0e41d..866694fb0e7 100644 --- a/board/freescale/m54455evb/m54455evb.c +++ b/board/freescale/m54455evb/m54455evb.c @@ -107,7 +107,7 @@ int ide_preinit(void) { volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; - gpio->par_fec |= (gpio->par_fec & GPIO_PAR_FEC_FEC1_MASK) | 0x10; + gpio->par_fec |= (gpio->par_fec & GPIO_PAR_FEC_FEC1_UNMASK) | 0x10; gpio->par_feci2c |= (gpio->par_feci2c & 0xF0FF) | (GPIO_PAR_FECI2C_MDC1_ATA_DIOR | GPIO_PAR_FECI2C_MDIO1_ATA_DIOW); diff --git a/cpu/mcf5227x/cpu_init.c b/cpu/mcf5227x/cpu_init.c index e160ee1aff5..d336857edf8 100644 --- a/cpu/mcf5227x/cpu_init.c +++ b/cpu/mcf5227x/cpu_init.c @@ -133,19 +133,19 @@ void uart_port_conf(void) switch (CONFIG_SYS_UART_PORT) { case 0: gpio->par_uart &= - (GPIO_PAR_UART_U0TXD_MASK & GPIO_PAR_UART_U0RXD_MASK); + (GPIO_PAR_UART_U0TXD_UNMASK & GPIO_PAR_UART_U0RXD_UNMASK); gpio->par_uart |= (GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD); break; case 1: gpio->par_uart &= - (GPIO_PAR_UART_U1TXD_MASK & GPIO_PAR_UART_U1RXD_MASK); + (GPIO_PAR_UART_U1TXD_UNMASK & GPIO_PAR_UART_U1RXD_UNMASK); gpio->par_uart |= (GPIO_PAR_UART_U1TXD_U1TXD | GPIO_PAR_UART_U1RXD_U1RXD); break; case 2: gpio->par_dspi &= - (GPIO_PAR_DSPI_SIN_MASK & GPIO_PAR_DSPI_SOUT_MASK); + (GPIO_PAR_DSPI_SIN_UNMASK & GPIO_PAR_DSPI_SOUT_UNMASK); gpio->par_dspi = (GPIO_PAR_DSPI_SIN_U2RXD | GPIO_PAR_DSPI_SOUT_U2TXD); break; @@ -175,11 +175,11 @@ int cfspi_claim_bus(uint bus, uint cs) switch (cs) { case 0: - gpio->par_dspi &= ~GPIO_PAR_DSPI_PCS0_MASK; + gpio->par_dspi &= ~GPIO_PAR_DSPI_PCS0_UNMASK; gpio->par_dspi |= GPIO_PAR_DSPI_PCS0_PCS0; break; case 2: - gpio->par_timer &= GPIO_PAR_TIMER_T2IN_MASK; + gpio->par_timer &= GPIO_PAR_TIMER_T2IN_UNMASK; gpio->par_timer |= GPIO_PAR_TIMER_T2IN_DSPIPCS2; break; } @@ -199,7 +199,7 @@ void cfspi_release_bus(uint bus, uint cs) gpio->par_dspi &= ~GPIO_PAR_DSPI_PCS0_PCS0; break; case 2: - gpio->par_timer &= GPIO_PAR_TIMER_T2IN_MASK; + gpio->par_timer &= GPIO_PAR_TIMER_T2IN_UNMASK; break; } } diff --git a/cpu/mcf52x2/cpu_init.c b/cpu/mcf52x2/cpu_init.c index 5b06930df80..747c1cf90dc 100644 --- a/cpu/mcf52x2/cpu_init.c +++ b/cpu/mcf52x2/cpu_init.c @@ -142,29 +142,29 @@ void uart_port_conf(void) /* Setup Ports: */ switch (CONFIG_SYS_UART_PORT) { case 0: - gpio->par_uart &= GPIO_PAR_UART0_MASK; + gpio->par_uart &= GPIO_PAR_UART0_UNMASK; gpio->par_uart |= (GPIO_PAR_UART_U0TXD | GPIO_PAR_UART_U0RXD); break; case 1: - gpio->par_uart &= GPIO_PAR_UART0_MASK; + gpio->par_uart &= GPIO_PAR_UART0_UNMASK; gpio->par_uart |= (GPIO_PAR_UART_U1TXD | GPIO_PAR_UART_U1RXD); break; case 2: #ifdef CONFIG_SYS_UART2_PRI_GPIO gpio->par_timer &= - (GPIO_PAR_TMR_TIN0_MASK | GPIO_PAR_TMR_TIN1_MASK); + (GPIO_PAR_TMR_TIN0_UNMASK | GPIO_PAR_TMR_TIN1_UNMASK); gpio->par_timer |= (GPIO_PAR_TMR_TIN0_U2TXD | GPIO_PAR_TMR_TIN1_U2RXD); #endif #ifdef CONFIG_SYS_UART2_ALT1_GPIO gpio->par_feci2c &= - (GPIO_PAR_FECI2C_MDC_MASK | GPIO_PAR_FECI2C_MDIO_MASK); + (GPIO_PAR_FECI2C_MDC_UNMASK | GPIO_PAR_FECI2C_MDIO_UNMASK); gpio->par_feci2c |= (GPIO_PAR_FECI2C_MDC_U2TXD | GPIO_PAR_FECI2C_MDIO_U2RXD); #endif #ifdef CONFIG_SYS_UART2_ALT1_GPIO gpio->par_feci2c &= - (GPIO_PAR_FECI2C_SDA_MASK | GPIO_PAR_FECI2C_SCL_MASK); + (GPIO_PAR_FECI2C_SDA_UNMASK | GPIO_PAR_FECI2C_SCL_UNMASK); gpio->par_feci2c |= (GPIO_PAR_FECI2C_SDA_U2TXD | GPIO_PAR_FECI2C_SCL_U2RXD); #endif @@ -184,8 +184,8 @@ int fecpin_setclear(struct eth_device *dev, int setclear) GPIO_PAR_FECI2C_MDC_MDC | GPIO_PAR_FECI2C_MDIO_MDIO; } else { gpio->par_fec &= - (GPIO_PAR_FEC_7W_MASK & GPIO_PAR_FEC_MII_MASK); - gpio->par_feci2c &= GPIO_PAR_FECI2C_RMII_MASK; + (GPIO_PAR_FEC_7W_UNMASK & GPIO_PAR_FEC_MII_UNMASK); + gpio->par_feci2c &= GPIO_PAR_FECI2C_RMII_UNMASK; } return 0; } diff --git a/cpu/mcf532x/cpu_init.c b/cpu/mcf532x/cpu_init.c index 4f1695cef86..04160a82943 100644 --- a/cpu/mcf532x/cpu_init.c +++ b/cpu/mcf532x/cpu_init.c @@ -145,12 +145,12 @@ void uart_port_conf(void) case 1: #ifdef CONFIG_SYS_UART1_ALT1_GPIO gpio->par_simp1h &= - ~(GPIO_PAR_SIMP1H_DATA1_MASK | GPIO_PAR_SIMP1H_VEN1_MASK); + ~(GPIO_PAR_SIMP1H_DATA1_UNMASK | GPIO_PAR_SIMP1H_VEN1_UNMASK); gpio->par_simp1h |= (GPIO_PAR_SIMP1H_DATA1_U1TXD | GPIO_PAR_SIMP1H_VEN1_U1RXD); #elif defined(CONFIG_SYS_UART1_ALT2_GPIO) gpio->par_ssih &= - ~(GPIO_PAR_SSIH_RXD_MASK | GPIO_PAR_SSIH_TXD_MASK); + ~(GPIO_PAR_SSIH_RXD_UNMASK | GPIO_PAR_SSIH_TXD_UNMASK); gpio->par_ssih |= (GPIO_PAR_SSIH_RXD_U1RXD | GPIO_PAR_SSIH_TXD_U1TXD); #endif @@ -160,12 +160,12 @@ void uart_port_conf(void) gpio->par_uart |= (GPIO_PAR_UART_U2TXD | GPIO_PAR_UART_U2RXD); #elif defined(CONFIG_SYS_UART2_ALT1_GPIO) gpio->par_dspih &= - ~(GPIO_PAR_DSPIH_SIN_MASK | GPIO_PAR_DSPIH_SOUT_MASK); + ~(GPIO_PAR_DSPIH_SIN_UNMASK | GPIO_PAR_DSPIH_SOUT_UNMASK); gpio->par_dspih |= (GPIO_PAR_DSPIH_SIN_U2RXD | GPIO_PAR_DSPIH_SOUT_U2TXD); #elif defined(CONFIG_SYS_UART2_ALT2_GPIO) gpio->par_feci2c &= - ~(GPIO_PAR_FECI2C_SDA_MASK | GPIO_PAR_FECI2C_SCL_MASK); + ~(GPIO_PAR_FECI2C_SDA_UNMASK | GPIO_PAR_FECI2C_SCL_UNMASK); gpio->par_feci2c |= (GPIO_PAR_FECI2C_SDA_U2TXD | GPIO_PAR_FECI2C_SCL_U2RXD); #endif @@ -195,11 +195,11 @@ int fecpin_setclear(struct eth_device *dev, int setclear) if (info->iobase == CONFIG_SYS_FEC0_IOBASE) { gpio->par_fec &= ~(GPIO_PAR_FEC0_7W_FEC | GPIO_PAR_FEC0_RMII_FEC); - gpio->par_feci2c &= GPIO_PAR_FECI2C_RMII0_MASK; + gpio->par_feci2c &= GPIO_PAR_FECI2C_RMII0_UNMASK; } else { gpio->par_fec &= ~(GPIO_PAR_FEC1_7W_FEC | GPIO_PAR_FEC1_RMII_FEC); - gpio->par_feci2c &= GPIO_PAR_FECI2C_RMII1_MASK; + gpio->par_feci2c &= GPIO_PAR_FECI2C_RMII1_UNMASK; } } return 0; diff --git a/cpu/mcf532x/speed.c b/cpu/mcf532x/speed.c index 67f08c76028..5a29e2567a8 100644 --- a/cpu/mcf532x/speed.c +++ b/cpu/mcf532x/speed.c @@ -229,7 +229,7 @@ int clock_pll(int fsys, int flags) PLL_PDR_OUTDIV3((BUSDIV / 2) - 1) | PLL_PDR_OUTDIV4(USBDIV - 1); - pll->pcr &= PLL_PCR_FBDIV_MASK; + pll->pcr &= PLL_PCR_FBDIV_UNMASK; pll->pcr |= PLL_PCR_FBDIV(mfd - 1); #endif #ifdef CONFIG_MCF532x diff --git a/cpu/mcf5445x/cpu_init.c b/cpu/mcf5445x/cpu_init.c index 48b37dfe7dd..00b7910ccd5 100644 --- a/cpu/mcf5445x/cpu_init.c +++ b/cpu/mcf5445x/cpu_init.c @@ -164,9 +164,9 @@ int fecpin_setclear(struct eth_device *dev, int setclear) ~(GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0); if (info->iobase == CONFIG_SYS_FEC0_IOBASE) - gpio->par_fec &= GPIO_PAR_FEC_FEC0_MASK; + gpio->par_fec &= GPIO_PAR_FEC_FEC0_UNMASK; else - gpio->par_fec &= GPIO_PAR_FEC_FEC1_MASK; + gpio->par_fec &= GPIO_PAR_FEC_FEC1_UNMASK; } return 0; } diff --git a/include/asm-m68k/m520x.h b/include/asm-m68k/m520x.h index 267bfd994a6..71f147e751f 100644 --- a/include/asm-m68k/m520x.h +++ b/include/asm-m68k/m520x.h @@ -70,7 +70,6 @@ #define PACR_TP 1 #define SCM_BMT_BME (0x00000008) -#define SCM_BMT_BMT_MASK (0x07) #define SCM_BMT_BMT(x) ((x) & 0x07) #define SCM_BMT_BMT1024 (0x0000) #define SCM_BMT_BMT512 (0x0001) @@ -179,7 +178,7 @@ #define CCM_CCR_PLL_MODE (0x0002) #define CCM_CCR_RESERVED (0x0001) -#define CCM_CIR_PIN(x) (((x) & 0x03FF) << 6) +#define CCM_CIR_PIN(x) (((x) & 0xFFC0) >> 6) #define CCM_CIR_PRN(x) ((x) & 0x003F) /* *** General Purpose I/O (GPIO) *** */ @@ -196,7 +195,7 @@ #define GPIO_PAR_FBCTL_OE (0x10) #define GPIO_PAR_FBCTL_TA (0x08) #define GPIO_PAR_FBCTL_RWB (0x04) -#define GPIO_PAR_FBCTL_TS_MASK (0xFC) +#define GPIO_PAR_FBCTL_TS_UNMASK (0xFC) #define GPIO_PAR_FBCTL_TS_TS (0x03) #define GPIO_PAR_FBCTL_TS_DMA (0x02) @@ -207,39 +206,39 @@ #define GPIO_PAR_CS3 (0x08) #define GPIO_PAR_CS2 (0x04) -#define GPIO_PAR_CS1_MASK (0xFC) +#define GPIO_PAR_CS1_UNMASK (0xFC) #define GPIO_PAR_CS1_CS1 (0x03) #define GPIO_PAR_CS1_SDCS1 (0x02) -#define GPIO_PAR_FECI2C_RMII_MASK (0x0F) -#define GPIO_PAR_FECI2C_MDC_MASK (0x3F) +#define GPIO_PAR_FECI2C_RMII_UNMASK (0x0F) +#define GPIO_PAR_FECI2C_MDC_UNMASK (0x3F) #define GPIO_PAR_FECI2C_MDC_MDC (0xC0) #define GPIO_PAR_FECI2C_MDC_SCL (0x80) #define GPIO_PAR_FECI2C_MDC_U2TXD (0x40) -#define GPIO_PAR_FECI2C_MDIO_MASK (0xCF) +#define GPIO_PAR_FECI2C_MDIO_UNMASK (0xCF) #define GPIO_PAR_FECI2C_MDIO_MDIO (0x30) #define GPIO_PAR_FECI2C_MDIO_SDA (0x20) #define GPIO_PAR_FECI2C_MDIO_U2RXD (0x10) -#define GPIO_PAR_FECI2C_I2C_MASK (0xF0) -#define GPIO_PAR_FECI2C_SCL_MASK (0xF3) +#define GPIO_PAR_FECI2C_I2C_UNMASK (0xF0) +#define GPIO_PAR_FECI2C_SCL_UNMASK (0xF3) #define GPIO_PAR_FECI2C_SCL_SCL (0x0C) #define GPIO_PAR_FECI2C_SCL_U2RXD (0x04) -#define GPIO_PAR_FECI2C_SDA_MASK (0xFC) +#define GPIO_PAR_FECI2C_SDA_UNMASK (0xFC) #define GPIO_PAR_FECI2C_SDA_SDA (0x03) #define GPIO_PAR_FECI2C_SDA_U2TXD (0x01) -#define GPIO_PAR_QSPI_PCS2_MASK (0x3F) +#define GPIO_PAR_QSPI_PCS2_UNMASK (0x3F) #define GPIO_PAR_QSPI_PCS2_PCS2 (0xC0) #define GPIO_PAR_QSPI_PCS2_DACK0 (0x80) #define GPIO_PAR_QSPI_PCS2_U2RTS (0x40) -#define GPIO_PAR_QSPI_DIN_MASK (0xCF) +#define GPIO_PAR_QSPI_DIN_UNMASK (0xCF) #define GPIO_PAR_QSPI_DIN_DIN (0x30) #define GPIO_PAR_QSPI_DIN_DREQ0 (0x20) #define GPIO_PAR_QSPI_DIN_U2CTS (0x10) -#define GPIO_PAR_QSPI_DOUT_MASK (0xF3) +#define GPIO_PAR_QSPI_DOUT_UNMASK (0xF3) #define GPIO_PAR_QSPI_DOUT_DOUT (0x0C) #define GPIO_PAR_QSPI_DOUT_SDA (0x08) -#define GPIO_PAR_QSPI_SCK_MASK (0xFC) +#define GPIO_PAR_QSPI_SCK_UNMASK (0xFC) #define GPIO_PAR_QSPI_SCK_SCK (0x03) #define GPIO_PAR_QSPI_SCK_SCL (0x02) @@ -247,50 +246,50 @@ #define GPIO_PAR_TMR_TIN2(x) (((x) & 0x03) << 4) #define GPIO_PAR_TMR_TIN1(x) (((x) & 0x03) << 2) #define GPIO_PAR_TMR_TIN0(x) ((x) & 0x03) -#define GPIO_PAR_TMR_TIN3_MASK (0x3F) +#define GPIO_PAR_TMR_TIN3_UNMASK (0x3F) #define GPIO_PAR_TMR_TIN3_TIN3 (0xC0) #define GPIO_PAR_TMR_TIN3_TOUT3 (0x80) #define GPIO_PAR_TMR_TIN3_U2CTS (0x40) -#define GPIO_PAR_TMR_TIN2_MASK (0xCF) +#define GPIO_PAR_TMR_TIN2_UNMASK (0xCF) #define GPIO_PAR_TMR_TIN2_TIN2 (0x30) #define GPIO_PAR_TMR_TIN2_TOUT2 (0x20) #define GPIO_PAR_TMR_TIN2_U2RTS (0x10) -#define GPIO_PAR_TMR_TIN1_MASK (0xF3) +#define GPIO_PAR_TMR_TIN1_UNMASK (0xF3) #define GPIO_PAR_TMR_TIN1_TIN1 (0x0C) #define GPIO_PAR_TMR_TIN1_TOUT1 (0x08) #define GPIO_PAR_TMR_TIN1_U2RXD (0x04) -#define GPIO_PAR_TMR_TIN0_MASK (0xFC) +#define GPIO_PAR_TMR_TIN0_UNMASK (0xFC) #define GPIO_PAR_TMR_TIN0_TIN0 (0x03) #define GPIO_PAR_TMR_TIN0_TOUT0 (0x02) #define GPIO_PAR_TMR_TIN0_U2TXD (0x01) -#define GPIO_PAR_UART1_MASK (0xF03F) -#define GPIO_PAR_UART0_MASK (0xFFC0) -#define GPIO_PAR_UART_U1CTS_MASK (0xF3FF) +#define GPIO_PAR_UART1_UNMASK (0xF03F) +#define GPIO_PAR_UART0_UNMASK (0xFFC0) +#define GPIO_PAR_UART_U1CTS_UNMASK (0xF3FF) #define GPIO_PAR_UART_U1CTS_U1CTS (0x0C00) #define GPIO_PAR_UART_U1CTS_TIN1 (0x0800) #define GPIO_PAR_UART_U1CTS_PCS1 (0x0400) -#define GPIO_PAR_UART_U1RTS_MASK (0xFCFF) +#define GPIO_PAR_UART_U1RTS_UNMASK (0xFCFF) #define GPIO_PAR_UART_U1RTS_U1RTS (0x0300) #define GPIO_PAR_UART_U1RTS_TOUT1 (0x0200) #define GPIO_PAR_UART_U1RTS_PCS1 (0x0100) #define GPIO_PAR_UART_U1TXD (0x0080) #define GPIO_PAR_UART_U1RXD (0x0040) -#define GPIO_PAR_UART_U0CTS_MASK (0xFFCF) +#define GPIO_PAR_UART_U0CTS_UNMASK (0xFFCF) #define GPIO_PAR_UART_U0CTS_U0CTS (0x0030) #define GPIO_PAR_UART_U0CTS_TIN0 (0x0020) #define GPIO_PAR_UART_U0CTS_PCS0 (0x0010) -#define GPIO_PAR_UART_U0RTS_MASK (0xFFF3) +#define GPIO_PAR_UART_U0RTS_UNMASK (0xFFF3) #define GPIO_PAR_UART_U0RTS_U0RTS (0x000C) #define GPIO_PAR_UART_U0RTS_TOUT0 (0x0008) #define GPIO_PAR_UART_U0RTS_PCS0 (0x0004) #define GPIO_PAR_UART_U0TXD (0x0002) #define GPIO_PAR_UART_U0RXD (0x0001) -#define GPIO_PAR_FEC_7W_MASK (0xF3) +#define GPIO_PAR_FEC_7W_UNMASK (0xF3) #define GPIO_PAR_FEC_7W_FEC (0x0C) #define GPIO_PAR_FEC_7W_U1RTS (0x04) -#define GPIO_PAR_FEC_MII_MASK (0xFC) +#define GPIO_PAR_FEC_MII_UNMASK (0xFC) #define GPIO_PAR_FEC_MII_FEC (0x03) #define GPIO_PAR_FEC_MII_UnCTS (0x01) @@ -300,17 +299,17 @@ #define GPIO_MSCR_FB_DUP(x) (((x) & 0x03) << 4) #define GPIO_MSCR_FB_DLO(x) (((x) & 0x03) << 2) #define GPIO_MSCR_FB_ADRCTL(x) ((x) & 0x03) -#define GPIO_MSCR_FB_FBCLK_MASK (0x3F) -#define GPIO_MSCR_FB_DUP_MASK (0xCF) -#define GPIO_MSCR_FB_DLO_MASK (0xF3) -#define GPIO_MSCR_FB_ADRCTL_MASK (0xFC) +#define GPIO_MSCR_FB_FBCLK_UNMASK (0x3F) +#define GPIO_MSCR_FB_DUP_UNMASK (0xCF) +#define GPIO_MSCR_FB_DLO_UNMASK (0xF3) +#define GPIO_MSCR_FB_ADRCTL_UNMASK (0xFC) #define GPIO_MSCR_SDR_SDCLKB(x) (((x) & 0x03) << 4) #define GPIO_MSCR_SDR_SDCLK(x) (((x) & 0x03) << 2) #define GPIO_MSCR_SDR_SDRAM(x) ((x) & 0x03) -#define GPIO_MSCR_SDR_SDCLKB_MASK (0xCF) -#define GPIO_MSCR_SDR_SDCLK_MASK (0xF3) -#define GPIO_MSCR_SDR_SDRAM_MASK (0xFC) +#define GPIO_MSCR_SDR_SDCLKB_UNMASK (0xCF) +#define GPIO_MSCR_SDR_SDCLK_UNMASK (0xF3) +#define GPIO_MSCR_SDR_SDRAM_UNMASK (0xFC) #define MSCR_25VDDR (0x03) #define MSCR_18VDDR_FULL (0x02) @@ -318,27 +317,27 @@ #define MSCR_18VDDR_HALF (0x00) #define GPIO_DSCR_I2C(x) ((x) & 0x03) -#define GPIO_DSCR_I2C_MASK (0xFC) +#define GPIO_DSCR_I2C_UNMASK (0xFC) #define GPIO_DSCR_MISC_DBG(x) (((x) & 0x03) << 4) -#define GPIO_DSCR_MISC_DBG_MASK (0xCF) +#define GPIO_DSCR_MISC_DBG_UNMASK (0xCF) #define GPIO_DSCR_MISC_RSTOUT(x) (((x) & 0x03) << 2) -#define GPIO_DSCR_MISC_RSTOUT_MASK (0xF3) +#define GPIO_DSCR_MISC_RSTOUT_UNMASK (0xF3) #define GPIO_DSCR_MISC_TIMER(x) ((x) & 0x03) -#define GPIO_DSCR_MISC_TIMER_MASK (0xFC) +#define GPIO_DSCR_MISC_TIMER_UNMASK (0xFC) #define GPIO_DSCR_FEC(x) ((x) & 0x03) -#define GPIO_DSCR_FEC_MASK (0xFC) +#define GPIO_DSCR_FEC_UNMASK (0xFC) #define GPIO_DSCR_UART_UART1(x) (((x) & 0x03) << 4) -#define GPIO_DSCR_UART_UART1_MASK (0xCF) +#define GPIO_DSCR_UART_UART1_UNMASK (0xCF) #define GPIO_DSCR_UART_UART0(x) (((x) & 0x03) << 2) -#define GPIO_DSCR_UART_UART0_MASK (0xF3) +#define GPIO_DSCR_UART_UART0_UNMASK (0xF3) #define GPIO_DSCR_UART_IRQ(x) ((x) & 0x03) -#define GPIO_DSCR_UART_IRQ_MASK (0xFC) +#define GPIO_DSCR_UART_IRQ_UNMASK (0xFC) #define GPIO_DSCR_QSPI(x) ((x) & 0x03) -#define GPIO_DSCR_QSPI_MASK (0xFC) +#define GPIO_DSCR_QSPI_UNMASK (0xFC) #define DSCR_50PF (0x03) #define DSCR_30PF (0x02) @@ -347,12 +346,12 @@ /* *** Phase Locked Loop (PLL) *** */ #define PLL_PODR_CPUDIV(x) (((x) & 0x0F) << 4) -#define PLL_PODR_CPUDIV_MASK (0x0F) +#define PLL_PODR_CPUDIV_UNMASK (0x0F) #define PLL_PODR_BUSDIV(x) ((x) & 0x0F) -#define PLL_PODR_BUSDIV_MASK (0xF0) +#define PLL_PODR_BUSDIV_UNMASK (0xF0) #define PLL_PCR_DITHEN (0x80) #define PLL_PCR_DITHDEV(x) ((x) & 0x07) -#define PLL_PCR_DITHDEV_MASK (0xF8) +#define PLL_PCR_DITHDEV_UNMASK (0xF8) #endif /* __M520X__ */ diff --git a/include/asm-m68k/m5227x.h b/include/asm-m68k/m5227x.h index 824d333114c..c77d5dd6570 100644 --- a/include/asm-m68k/m5227x.h +++ b/include/asm-m68k/m5227x.h @@ -117,36 +117,34 @@ /* Bit definitions and macros for CCR */ #define CCM_CCR_DRAMSEL (0x0100) -#define CCM_CCR_CSC_MASK (0xFF3F) +#define CCM_CCR_CSC_UNMASK (0xFF3F) #define CCM_CCR_CSC_FBCS5_CS4 (0x00C0) #define CCM_CCR_CSC_FBCS5_A22 (0x0080) #define CCM_CCR_CSC_FB_A23_A22 (0x0040) #define CCM_CCR_LIMP (0x0020) #define CCM_CCR_LOAD (0x0010) -#define CCM_CCR_BOOTPS_MASK (0xFFF3) +#define CCM_CCR_BOOTPS_UNMASK (0xFFF3) #define CCM_CCR_BOOTPS_PS16 (0x0008) #define CCM_CCR_BOOTPS_PS8 (0x0004) #define CCM_CCR_BOOTPS_PS32 (0x0000) #define CCM_CCR_OSCMODE_OSCBYPASS (0x0002) /* Bit definitions and macros for RCON */ -#define CCM_RCON_CSC_MASK (0xFF3F) +#define CCM_RCON_CSC_UNMASK (0xFF3F) #define CCM_RCON_CSC_FBCS5_CS4 (0x00C0) #define CCM_RCON_CSC_FBCS5_A22 (0x0080) #define CCM_RCON_CSC_FB_A23_A22 (0x0040) #define CCM_RCON_LIMP (0x0020) #define CCM_RCON_LOAD (0x0010) -#define CCM_RCON_BOOTPS_MASK (0xFFF3) +#define CCM_RCON_BOOTPS_UNMASK (0xFFF3) #define CCM_RCON_BOOTPS_PS16 (0x0008) #define CCM_RCON_BOOTPS_PS8 (0x0004) #define CCM_RCON_BOOTPS_PS32 (0x0000) #define CCM_RCON_OSCMODE_OSCBYPASS (0x0002) /* Bit definitions and macros for CIR */ -#define CCM_CIR_PRN(x) (((x)&0x003F)) /* Part revision number */ -#define CCM_CIR_PIN(x) (((x)&0x03FF)<<6) /* Part identification number */ -#define CCM_CIR_PIN_MASK (0xFFC0) -#define CCM_CIR_PRN_MASK (0x003F) +#define CCM_CIR_PIN(x) (((x) & 0xFFC0) >> 6) +#define CCM_CIR_PRN(x) ((x) & 0x003F) #define CCM_CIR_PIN_MCF52277 (0x0000) /* Bit definitions and macros for MISCCR */ @@ -195,7 +193,7 @@ * General Purpose I/O Module (GPIO) *********************************************************************/ /* Bit definitions and macros for PAR_BE */ -#define GPIO_PAR_BE_MASK (0x0F) +#define GPIO_PAR_BE_UNMASK (0x0F) #define GPIO_PAR_BE_BE3_BE3 (0x08) #define GPIO_PAR_BE_BE3_GPIO (0x00) #define GPIO_PAR_BE_BE2_BE2 (0x04) @@ -217,111 +215,111 @@ #define GPIO_PAR_FBCTL_OE (0x80) #define GPIO_PAR_FBCTL_TA (0x40) #define GPIO_PAR_FBCTL_RW (0x20) -#define GPIO_PAR_FBCTL_TS_MASK (0xE7) +#define GPIO_PAR_FBCTL_TS_UNMASK (0xE7) #define GPIO_PAR_FBCTL_TS_FBTS (0x18) #define GPIO_PAR_FBCTL_TS_DMAACK (0x10) #define GPIO_PAR_FBCTL_TS_GPIO (0x00) /* Bit definitions and macros for PAR_FECI2C */ -#define GPIO_PAR_I2C_SCL_MASK (0xF3) +#define GPIO_PAR_I2C_SCL_UNMASK (0xF3) #define GPIO_PAR_I2C_SCL_SCL (0x0C) #define GPIO_PAR_I2C_SCL_CANTXD (0x08) #define GPIO_PAR_I2C_SCL_U2TXD (0x04) #define GPIO_PAR_I2C_SCL_GPIO (0x00) -#define GPIO_PAR_I2C_SDA_MASK (0xFC) +#define GPIO_PAR_I2C_SDA_UNMASK (0xFC) #define GPIO_PAR_I2C_SDA_SDA (0x03) #define GPIO_PAR_I2C_SDA_CANRXD (0x02) #define GPIO_PAR_I2C_SDA_U2RXD (0x01) #define GPIO_PAR_I2C_SDA_GPIO (0x00) /* Bit definitions and macros for PAR_UART */ -#define GPIO_PAR_UART_U1CTS_MASK (0x3FFF) +#define GPIO_PAR_UART_U1CTS_UNMASK (0x3FFF) #define GPIO_PAR_UART_U1CTS_U1CTS (0xC000) #define GPIO_PAR_UART_U1CTS_SSIBCLK (0x8000) #define GPIO_PAR_UART_U1CTS_LCDCLS (0x4000) #define GPIO_PAR_UART_U1CTS_GPIO (0x0000) -#define GPIO_PAR_UART_U1RTS_MASK (0xCFFF) +#define GPIO_PAR_UART_U1RTS_UNMASK (0xCFFF) #define GPIO_PAR_UART_U1RTS_U1RTS (0x3000) #define GPIO_PAR_UART_U1RTS_SSIFS (0x2000) #define GPIO_PAR_UART_U1RTS_LCDPS (0x1000) #define GPIO_PAR_UART_U1RTS_GPIO (0x0000) -#define GPIO_PAR_UART_U1RXD_MASK (0xF3FF) +#define GPIO_PAR_UART_U1RXD_UNMASK (0xF3FF) #define GPIO_PAR_UART_U1RXD_U1RXD (0x0C00) #define GPIO_PAR_UART_U1RXD_SSIRXD (0x0800) #define GPIO_PAR_UART_U1RXD_GPIO (0x0000) -#define GPIO_PAR_UART_U1TXD_MASK (0xFCFF) +#define GPIO_PAR_UART_U1TXD_UNMASK (0xFCFF) #define GPIO_PAR_UART_U1TXD_U1TXD (0x0300) #define GPIO_PAR_UART_U1TXD_SSITXD (0x0200) #define GPIO_PAR_UART_U1TXD_GPIO (0x0000) -#define GPIO_PAR_UART_U0CTS_MASK (0xFF3F) +#define GPIO_PAR_UART_U0CTS_UNMASK (0xFF3F) #define GPIO_PAR_UART_U0CTS_U0CTS (0x00C0) #define GPIO_PAR_UART_U0CTS_T1OUT (0x0080) #define GPIO_PAR_UART_U0CTS_USBVBUSEN (0x0040) #define GPIO_PAR_UART_U0CTS_GPIO (0x0000) -#define GPIO_PAR_UART_U0RTS_MASK (0xFFCF) +#define GPIO_PAR_UART_U0RTS_UNMASK (0xFFCF) #define GPIO_PAR_UART_U0RTS_U0RTS (0x0030) #define GPIO_PAR_UART_U0RTS_T1IN (0x0020) #define GPIO_PAR_UART_U0RTS_USBVBUSOC (0x0010) #define GPIO_PAR_UART_U0RTS_GPIO (0x0000) -#define GPIO_PAR_UART_U0RXD_MASK (0xFFF3) +#define GPIO_PAR_UART_U0RXD_UNMASK (0xFFF3) #define GPIO_PAR_UART_U0RXD_U0RXD (0x000C) #define GPIO_PAR_UART_U0RXD_CANRX (0x0008) #define GPIO_PAR_UART_U0RXD_GPIO (0x0000) -#define GPIO_PAR_UART_U0TXD_MASK (0xFFFC) +#define GPIO_PAR_UART_U0TXD_UNMASK (0xFFFC) #define GPIO_PAR_UART_U0TXD_U0TXD (0x0003) #define GPIO_PAR_UART_U0TXD_CANTX (0x0002) #define GPIO_PAR_UART_U0TXD_GPIO (0x0000) /* Bit definitions and macros for PAR_DSPI */ -#define GPIO_PAR_DSPI_PCS0_MASK (0x3F) +#define GPIO_PAR_DSPI_PCS0_UNMASK (0x3F) #define GPIO_PAR_DSPI_PCS0_PCS0 (0xC0) #define GPIO_PAR_DSPI_PCS0_U2RTS (0x80) #define GPIO_PAR_DSPI_PCS0_GPIO (0x00) -#define GPIO_PAR_DSPI_SIN_MASK (0xCF) +#define GPIO_PAR_DSPI_SIN_UNMASK (0xCF) #define GPIO_PAR_DSPI_SIN_SIN (0x30) #define GPIO_PAR_DSPI_SIN_U2RXD (0x20) #define GPIO_PAR_DSPI_SIN_GPIO (0x00) -#define GPIO_PAR_DSPI_SOUT_MASK (0xF3) +#define GPIO_PAR_DSPI_SOUT_UNMASK (0xF3) #define GPIO_PAR_DSPI_SOUT_SOUT (0x0C) #define GPIO_PAR_DSPI_SOUT_U2TXD (0x08) #define GPIO_PAR_DSPI_SOUT_GPIO (0x00) -#define GPIO_PAR_DSPI_SCK_MASK (0xFC) +#define GPIO_PAR_DSPI_SCK_UNMASK (0xFC) #define GPIO_PAR_DSPI_SCK_SCK (0x03) #define GPIO_PAR_DSPI_SCK_U2CTS (0x02) #define GPIO_PAR_DSPI_SCK_GPIO (0x00) /* Bit definitions and macros for PAR_TIMER */ -#define GPIO_PAR_TIMER_T3IN_MASK (0x3F) +#define GPIO_PAR_TIMER_T3IN_UNMASK (0x3F) #define GPIO_PAR_TIMER_T3IN_T3IN (0xC0) #define GPIO_PAR_TIMER_T3IN_T3OUT (0x80) #define GPIO_PAR_TIMER_T3IN_SSIMCLK (0x40) #define GPIO_PAR_TIMER_T3IN_GPIO (0x00) -#define GPIO_PAR_TIMER_T2IN_MASK (0xCF) +#define GPIO_PAR_TIMER_T2IN_UNMASK (0xCF) #define GPIO_PAR_TIMER_T2IN_T2IN (0x30) #define GPIO_PAR_TIMER_T2IN_T2OUT (0x20) #define GPIO_PAR_TIMER_T2IN_DSPIPCS2 (0x10) #define GPIO_PAR_TIMER_T2IN_GPIO (0x00) -#define GPIO_PAR_TIMER_T1IN_MASK (0xF3) +#define GPIO_PAR_TIMER_T1IN_UNMASK (0xF3) #define GPIO_PAR_TIMER_T1IN_T1IN (0x0C) #define GPIO_PAR_TIMER_T1IN_T1OUT (0x08) #define GPIO_PAR_TIMER_T1IN_LCDCONTRAST (0x04) #define GPIO_PAR_TIMER_T1IN_GPIO (0x00) -#define GPIO_PAR_TIMER_T0IN_MASK (0xFC) +#define GPIO_PAR_TIMER_T0IN_UNMASK (0xFC) #define GPIO_PAR_TIMER_T0IN_T0IN (0x03) #define GPIO_PAR_TIMER_T0IN_T0OUT (0x02) #define GPIO_PAR_TIMER_T0IN_LCDREV (0x01) #define GPIO_PAR_TIMER_T0IN_GPIO (0x00) /* Bit definitions and macros for GPIO_PAR_LCDCTL */ -#define GPIO_PAR_LCDCTL_ACDOE_MASK (0xE7) +#define GPIO_PAR_LCDCTL_ACDOE_UNMASK (0xE7) #define GPIO_PAR_LCDCTL_ACDOE_ACDOE (0x18) #define GPIO_PAR_LCDCTL_ACDOE_SPLSPR (0x10) #define GPIO_PAR_LCDCTL_ACDOE_GPIO (0x00) @@ -330,141 +328,141 @@ #define GPIO_PAR_LCDCTL_LSCLK (0x01) /* Bit definitions and macros for PAR_IRQ */ -#define GPIO_PAR_IRQ_IRQ4_MASK (0xF3) +#define GPIO_PAR_IRQ_IRQ4_UNMASK (0xF3) #define GPIO_PAR_IRQ_IRQ4_SSIINPCLK (0x0C) #define GPIO_PAR_IRQ_IRQ4_DMAREQ0 (0x08) #define GPIO_PAR_IRQ_IRQ4_GPIO (0x00) -#define GPIO_PAR_IRQ_IRQ1_MASK (0xFC) +#define GPIO_PAR_IRQ_IRQ1_UNMASK (0xFC) #define GPIO_PAR_IRQ_IRQ1_PCIINT (0x03) #define GPIO_PAR_IRQ_IRQ1_USBCLKIN (0x02) #define GPIO_PAR_IRQ_IRQ1_SSICLKIN (0x01) #define GPIO_PAR_IRQ_IRQ1_GPIO (0x00) /* Bit definitions and macros for GPIO_PAR_LCDH */ -#define GPIO_PAR_LCDH_LD17_MASK (0xFFFFF3FF) +#define GPIO_PAR_LCDH_LD17_UNMASK (0xFFFFF3FF) #define GPIO_PAR_LCDH_LD17_LD17 (0x00000C00) #define GPIO_PAR_LCDH_LD17_LD11 (0x00000800) #define GPIO_PAR_LCDH_LD17_GPIO (0x00000000) -#define GPIO_PAR_LCDH_LD16_MASK (0xFFFFFCFF) +#define GPIO_PAR_LCDH_LD16_UNMASK (0xFFFFFCFF) #define GPIO_PAR_LCDH_LD16_LD16 (0x00000300) #define GPIO_PAR_LCDH_LD16_LD10 (0x00000200) #define GPIO_PAR_LCDH_LD16_GPIO (0x00000000) -#define GPIO_PAR_LCDH_LD15_MASK (0xFFFFFF3F) +#define GPIO_PAR_LCDH_LD15_UNMASK (0xFFFFFF3F) #define GPIO_PAR_LCDH_LD15_LD15 (0x000000C0) #define GPIO_PAR_LCDH_LD15_LD9 (0x00000080) #define GPIO_PAR_LCDH_LD15_GPIO (0x00000000) -#define GPIO_PAR_LCDH_LD14_MASK (0xFFFFFFCF) +#define GPIO_PAR_LCDH_LD14_UNMASK (0xFFFFFFCF) #define GPIO_PAR_LCDH_LD14_LD14 (0x00000030) #define GPIO_PAR_LCDH_LD14_LD8 (0x00000020) #define GPIO_PAR_LCDH_LD14_GPIO (0x00000000) -#define GPIO_PAR_LCDH_LD13_MASK (0xFFFFFFF3) +#define GPIO_PAR_LCDH_LD13_UNMASK (0xFFFFFFF3) #define GPIO_PAR_LCDH_LD13_LD13 (0x0000000C) #define GPIO_PAR_LCDH_LD13_CANTX (0x00000008) #define GPIO_PAR_LCDH_LD13_GPIO (0x00000000) -#define GPIO_PAR_LCDH_LD12_MASK (0xFFFFFFFC) +#define GPIO_PAR_LCDH_LD12_UNMASK (0xFFFFFFFC) #define GPIO_PAR_LCDH_LD12_LD12 (0x00000003) #define GPIO_PAR_LCDH_LD12_CANRX (0x00000002) #define GPIO_PAR_LCDH_LD12_GPIO (0x00000000) /* Bit definitions and macros for GPIO_PAR_LCDL */ -#define GPIO_PAR_LCDL_LD11_MASK (0x3FFFFFFF) +#define GPIO_PAR_LCDL_LD11_UNMASK (0x3FFFFFFF) #define GPIO_PAR_LCDL_LD11_LD11 (0xC0000000) #define GPIO_PAR_LCDL_LD11_LD7 (0x80000000) #define GPIO_PAR_LCDL_LD11_GPIO (0x00000000) -#define GPIO_PAR_LCDL_LD10_MASK (0xCFFFFFFF) +#define GPIO_PAR_LCDL_LD10_UNMASK (0xCFFFFFFF) #define GPIO_PAR_LCDL_LD10_LD10 (0x30000000) #define GPIO_PAR_LCDL_LD10_LD6 (0x20000000) #define GPIO_PAR_LCDL_LD10_GPIO (0x00000000) -#define GPIO_PAR_LCDL_LD9_MASK (0xF3FFFFFF) +#define GPIO_PAR_LCDL_LD9_UNMASK (0xF3FFFFFF) #define GPIO_PAR_LCDL_LD9_LD9 (0x0C000000) #define GPIO_PAR_LCDL_LD9_LD5 (0x08000000) #define GPIO_PAR_LCDL_LD9_GPIO (0x00000000) -#define GPIO_PAR_LCDL_LD8_MASK (0xFCFFFFFF) +#define GPIO_PAR_LCDL_LD8_UNMASK (0xFCFFFFFF) #define GPIO_PAR_LCDL_LD8_LD8 (0x03000000) #define GPIO_PAR_LCDL_LD8_LD4 (0x02000000) #define GPIO_PAR_LCDL_LD8_GPIO (0x00000000) -#define GPIO_PAR_LCDL_LD7_MASK (0xFF3FFFFF) +#define GPIO_PAR_LCDL_LD7_UNMASK (0xFF3FFFFF) #define GPIO_PAR_LCDL_LD7_LD7 (0x00C00000) #define GPIO_PAR_LCDL_LD7_PWM7 (0x00800000) #define GPIO_PAR_LCDL_LD7_GPIO (0x00000000) -#define GPIO_PAR_LCDL_LD6_MASK (0xFFCFFFFF) +#define GPIO_PAR_LCDL_LD6_UNMASK (0xFFCFFFFF) #define GPIO_PAR_LCDL_LD6_LD6 (0x00300000) #define GPIO_PAR_LCDL_LD6_PWM5 (0x00200000) #define GPIO_PAR_LCDL_LD6_GPIO (0x00000000) -#define GPIO_PAR_LCDL_LD5_MASK (0xFFF3FFFF) +#define GPIO_PAR_LCDL_LD5_UNMASK (0xFFF3FFFF) #define GPIO_PAR_LCDL_LD5_LD5 (0x000C0000) #define GPIO_PAR_LCDL_LD5_LD3 (0x00080000) #define GPIO_PAR_LCDL_LD5_GPIO (0x00000000) -#define GPIO_PAR_LCDL_LD4_MASK (0xFFFCFFFF) +#define GPIO_PAR_LCDL_LD4_UNMASK (0xFFFCFFFF) #define GPIO_PAR_LCDL_LD4_LD4 (0x00030000) #define GPIO_PAR_LCDL_LD4_LD2 (0x00020000) #define GPIO_PAR_LCDL_LD4_GPIO (0x00000000) -#define GPIO_PAR_LCDL_LD3_MASK (0xFFFF3FFF) +#define GPIO_PAR_LCDL_LD3_UNMASK (0xFFFF3FFF) #define GPIO_PAR_LCDL_LD3_LD3 (0x0000C000) #define GPIO_PAR_LCDL_LD3_LD1 (0x00008000) #define GPIO_PAR_LCDL_LD3_GPIO (0x00000000) -#define GPIO_PAR_LCDL_LD2_MASK (0xFFFFCFFF) +#define GPIO_PAR_LCDL_LD2_UNMASK (0xFFFFCFFF) #define GPIO_PAR_LCDL_LD2_LD2 (0x00003000) #define GPIO_PAR_LCDL_LD2_LD0 (0x00002000) #define GPIO_PAR_LCDL_LD2_GPIO (0x00000000) -#define GPIO_PAR_LCDL_LD1_MASK (0xFFFFF3FF) +#define GPIO_PAR_LCDL_LD1_UNMASK (0xFFFFF3FF) #define GPIO_PAR_LCDL_LD1_LD1 (0x00000C00) #define GPIO_PAR_LCDL_LD1_PWM3 (0x00000800) #define GPIO_PAR_LCDL_LD1_GPIO (0x00000000) -#define GPIO_PAR_LCDL_LD0_MASK (0xFFFFFCFF) +#define GPIO_PAR_LCDL_LD0_UNMASK (0xFFFFFCFF) #define GPIO_PAR_LCDL_LD0_LD0 (0x00000300) #define GPIO_PAR_LCDL_LD0_PWM1 (0x00000200) #define GPIO_PAR_LCDL_LD0_GPIO (0x00000000) /* Bit definitions and macros for MSCR_FB */ -#define GPIO_MSCR_FB_DUPPER_MASK (0xCF) +#define GPIO_MSCR_FB_DUPPER_UNMASK (0xCF) #define GPIO_MSCR_FB_DUPPER_25V_33V (0x30) #define GPIO_MSCR_FB_DUPPER_FULL_18V (0x20) #define GPIO_MSCR_FB_DUPPER_OD (0x10) #define GPIO_MSCR_FB_DUPPER_HALF_18V (0x00) -#define GPIO_MSCR_FB_DLOWER_MASK (0xF3) +#define GPIO_MSCR_FB_DLOWER_UNMASK (0xF3) #define GPIO_MSCR_FB_DLOWER_25V_33V (0x0C) #define GPIO_MSCR_FB_DLOWER_FULL_18V (0x08) #define GPIO_MSCR_FB_DLOWER_OD (0x04) #define GPIO_MSCR_FB_DLOWER_HALF_18V (0x00) -#define GPIO_MSCR_FB_ADDRCTL_MASK (0xFC) +#define GPIO_MSCR_FB_ADDRCTL_UNMASK (0xFC) #define GPIO_MSCR_FB_ADDRCTL_25V_33V (0x03) #define GPIO_MSCR_FB_ADDRCTL_FULL_18V (0x02) #define GPIO_MSCR_FB_ADDRCTL_OD (0x01) #define GPIO_MSCR_FB_ADDRCTL_HALF_18V (0x00) /* Bit definitions and macros for MSCR_SDRAM */ -#define GPIO_MSCR_SDRAM_SDCLKB_MASK (0xCF) +#define GPIO_MSCR_SDRAM_SDCLKB_UNMASK (0xCF) #define GPIO_MSCR_SDRAM_SDCLKB_25V_33V (0x30) #define GPIO_MSCR_SDRAM_SDCLKB_FULL_18V (0x20) #define GPIO_MSCR_SDRAM_SDCLKB_OD (0x10) #define GPIO_MSCR_SDRAM_SDCLKB_HALF_18V (0x00) -#define GPIO_MSCR_SDRAM_SDCLK_MASK (0xF3) +#define GPIO_MSCR_SDRAM_SDCLK_UNMASK (0xF3) #define GPIO_MSCR_SDRAM_SDCLK_25V_33V (0x0C) #define GPIO_MSCR_SDRAM_SDCLK_FULL_18V (0x08) #define GPIO_MSCR_SDRAM_SDCLK_OPD (0x04) #define GPIO_MSCR_SDRAM_SDCLK_HALF_18V (0x00) -#define GPIO_MSCR_SDRAM_SDCTL_MASK (0xFC) +#define GPIO_MSCR_SDRAM_SDCTL_UNMASK (0xFC) #define GPIO_MSCR_SDRAM_SDCTL_25V_33V (0x03) #define GPIO_MSCR_SDRAM_SDCTL_FULL_18V (0x02) #define GPIO_MSCR_SDRAM_SDCTL_OPD (0x01) diff --git a/include/asm-m68k/m5235.h b/include/asm-m68k/m5235.h index 22987ac7789..71a40d33d20 100644 --- a/include/asm-m68k/m5235.h +++ b/include/asm-m68k/m5235.h @@ -557,8 +557,8 @@ #define CCM_RCON_MODE (0x0001) /* Bit definitions and macros for CCM_CIR */ -#define CCM_CIR_PIN(x) (((x)&0x03FF)<<6) -#define CCM_CIR_PRN(x) ((x)&0x003F) +#define CCM_CIR_PIN(x) (((x) & 0xFFC0) >> 6) +#define CCM_CIR_PRN(x) ((x) & 0x003F) /********************************************************************* * PLL Clock Module diff --git a/include/asm-m68k/m5301x.h b/include/asm-m68k/m5301x.h index 80cefc40aaf..0920a0dc2a5 100644 --- a/include/asm-m68k/m5301x.h +++ b/include/asm-m68k/m5301x.h @@ -254,7 +254,7 @@ #define CCM_MISCCR_PLL_LOCK (0x2000) #define CCM_MISCCR_LIMP (0x1000) #define CCM_MISCCR_BME (0x8000) -#define CCM_MISCCR_BMT_MASK (0xF8FF) +#define CCM_MISCCR_BMT_UNMASK (0xF8FF) #define CCM_MISCCR_BMT(x) (((x) & 0x0007) << 8) #define CCM_MISCCR_BMT_512 (0x0700) #define CCM_MISCCR_BMT_1024 (0x0600) @@ -330,32 +330,32 @@ #define GPIO_PAR_CS5 (0x40) #define GPIO_PAR_CS4 (0x10) -#define GPIO_PAR_CS1_MASK (0xF3) +#define GPIO_PAR_CS1_UNMASK (0xF3) #define GPIO_PAR_CS1_CS1 (0x0C) #define GPIO_PAR_CS1_SDCS1 (0x08) -#define GPIO_PAR_CS0_MASK (0xFC) +#define GPIO_PAR_CS0_UNMASK (0xFC) #define GPIO_PAR_CS0_CS0 (0x03) #define GPIO_PAR_CS0_CS4 (0x02) -#define GPIO_PAR_DSPIH_SIN_MASK (0x3F) +#define GPIO_PAR_DSPIH_SIN_UNMASK (0x3F) #define GPIO_PAR_DSPIH_SIN (0xC0) #define GPIO_PAR_DSPIH_SIN_U2RXD (0x80) -#define GPIO_PAR_DSPIH_SOUT_MASK (0xCF) +#define GPIO_PAR_DSPIH_SOUT_UNMASK (0xCF) #define GPIO_PAR_DSPIH_SOUT (0x30) #define GPIO_PAR_DSPIH_SOUT_U2TXD (0x20) -#define GPIO_PAR_DSPIH_SCK_MASK (0xF3) +#define GPIO_PAR_DSPIH_SCK_UNMASK (0xF3) #define GPIO_PAR_DSPIH_SCK (0x0C) #define GPIO_PAR_DSPIH_SCK_U2CTS (0x08) -#define GPIO_PAR_DSPIH_PCS0_MASK (0xFC) +#define GPIO_PAR_DSPIH_PCS0_UNMASK (0xFC) #define GPIO_PAR_DSPIH_PCS0 (0x03) #define GPIO_PAR_DSPIH_PCS0_U2RTS (0x02) -#define GPIO_PAR_DSPIL_PCS1_MASK (0x3F) +#define GPIO_PAR_DSPIL_PCS1_UNMASK (0x3F) #define GPIO_PAR_DSPIL_PCS1 (0xC0) -#define GPIO_PAR_DSPIL_PCS2_MASK (0xCF) +#define GPIO_PAR_DSPIL_PCS2_UNMASK (0xCF) #define GPIO_PAR_DSPIL_PCS2 (0x30) #define GPIO_PAR_DSPIL_PCS2_USBH_OC (0x20) -#define GPIO_PAR_DSPIL_PCS3_MASK (0xF3) +#define GPIO_PAR_DSPIL_PCS3_UNMASK (0xF3) #define GPIO_PAR_DSPIL_PCS3 (0x0C) #define GPIO_PAR_DSPIL_PCS3_USBH_EN (0x08) @@ -365,30 +365,30 @@ #define GPIO_PAR_FEC0_RMII_FEC (0x01) /* GPIO_PAR_FECI2C */ -#define GPIO_PAR_FECI2C_RMII0_MASK (0x3F) +#define GPIO_PAR_FECI2C_RMII0_UNMASK (0x3F) #define GPIO_PAR_FECI2C_MDC0 (0x80) #define GPIO_PAR_FECI2C_MDIO0 (0x40) -#define GPIO_PAR_FECI2C_RMII1_MASK (0xCF) +#define GPIO_PAR_FECI2C_RMII1_UNMASK (0xCF) #define GPIO_PAR_FECI2C_MDC1 (0x20) #define GPIO_PAR_FECI2C_MDIO1 (0x10) -#define GPIO_PAR_FECI2C_SDA_MASK (0xF3) +#define GPIO_PAR_FECI2C_SDA_UNMASK (0xF3) #define GPIO_PAR_FECI2C_SDA(x) (((x) & 0x03) << 2) #define GPIO_PAR_FECI2C_SDA_SDA (0x0C) #define GPIO_PAR_FECI2C_SDA_U2TXD (0x08) #define GPIO_PAR_FECI2C_SDA_MDIO1 (0x04) -#define GPIO_PAR_FECI2C_SCL_MASK (0xFC) +#define GPIO_PAR_FECI2C_SCL_UNMASK (0xFC) #define GPIO_PAR_FECI2C_SCL(x) ((x) & 0x03) #define GPIO_PAR_FECI2C_SCL_SCL (0x03) #define GPIO_PAR_FECI2C_SCL_U2RXD (0x02) #define GPIO_PAR_FECI2C_SCL_MDC1 (0x01) -#define GPIO_PAR_IRQ0H_IRQ07_MASK (0x3F) -#define GPIO_PAR_IRQ0H_IRQ06_MASK (0xCF) +#define GPIO_PAR_IRQ0H_IRQ07_UNMASK (0x3F) +#define GPIO_PAR_IRQ0H_IRQ06_UNMASK (0xCF) #define GPIO_PAR_IRQ0H_IRQ06_USBCLKIN (0x10) -#define GPIO_PAR_IRQ0H_IRQ04_MASK (0xFC) +#define GPIO_PAR_IRQ0H_IRQ04_UNMASK (0xFC) #define GPIO_PAR_IRQ0H_IRQ04_DREQ0 (0x02) -#define GPIO_PAR_IRQ0L_IRQ01_MASK (0xF3) +#define GPIO_PAR_IRQ0L_IRQ01_UNMASK (0xF3) #define GPIO_PAR_IRQ0L_IRQ01_DREQ1 (0x08) #define GPIO_PAR_IRQ1H_IRQ17_DDATA3 (0x40) @@ -401,24 +401,24 @@ #define GPIO_PAR_IRQ1L_IRQ11_PST1 (0x04) #define GPIO_PAR_IRQ1L_IRQ10_PST0 (0x01) -#define GPIO_PAR_SIMP1H_DATA1_MASK (0x3F) +#define GPIO_PAR_SIMP1H_DATA1_UNMASK (0x3F) #define GPIO_PAR_SIMP1H_DATA1_SIMDATA1 (0xC0) #define GPIO_PAR_SIMP1H_DATA1_SSITXD (0x80) #define GPIO_PAR_SIMP1H_DATA1_U1TXD (0x40) -#define GPIO_PAR_SIMP1H_VEN1_MASK (0xCF) +#define GPIO_PAR_SIMP1H_VEN1_UNMASK (0xCF) #define GPIO_PAR_SIMP1H_VEN1_SIMVEN1 (0x30) #define GPIO_PAR_SIMP1H_VEN1_SSIRXD (0x20) #define GPIO_PAR_SIMP1H_VEN1_U1RXD (0x10) -#define GPIO_PAR_SIMP1H_RST1_MASK (0xF3) +#define GPIO_PAR_SIMP1H_RST1_UNMASK (0xF3) #define GPIO_PAR_SIMP1H_RST1_SIMRST1 (0x0C) #define GPIO_PAR_SIMP1H_RST1_SSIFS (0x08) #define GPIO_PAR_SIMP1H_RST1_U1RTS (0x04) -#define GPIO_PAR_SIMP1H_PD1_MASK (0xFC) +#define GPIO_PAR_SIMP1H_PD1_UNMASK (0xFC) #define GPIO_PAR_SIMP1H_PD1_SIMPD1 (0x03) #define GPIO_PAR_SIMP1H_PD1_SSIBCLK (0x02) #define GPIO_PAR_SIMP1H_PD1_U1CTS (0x01) -#define GPIO_PAR_SIMP1L_CLK_MASK (0x3F) +#define GPIO_PAR_SIMP1L_CLK_UNMASK (0x3F) #define GPIO_PAR_SIMP1L_CLK_CLK1 (0xC0) #define GPIO_PAR_SIMP1L_CLK_SSIMCLK (0x80) @@ -432,19 +432,19 @@ #define GPIO_PAR_TIN2(x) (((x) & 0x03) << 4) #define GPIO_PAR_TIN1(x) (((x) & 0x03) << 2) #define GPIO_PAR_TIN0(x) ((x) & 0x03) -#define GPIO_PAR_TIN3_MASK (0x3F) +#define GPIO_PAR_TIN3_UNMASK (0x3F) #define GPIO_PAR_TIN3_TIN3 (0xC0) #define GPIO_PAR_TIN3_TOUT3 (0x80) #define GPIO_PAR_TIN3_IRQ03 (0x40) -#define GPIO_PAR_TIN2_MASK (0xCF) +#define GPIO_PAR_TIN2_UNMASK (0xCF) #define GPIO_PAR_TIN2_TIN2 (0x30) #define GPIO_PAR_TIN2_TOUT2 (0x20) #define GPIO_PAR_TIN2_IRQ02 (0x10) -#define GPIO_PAR_TIN1_MASK (0xF3) +#define GPIO_PAR_TIN1_UNMASK (0xF3) #define GPIO_PAR_TIN1_TIN1 (0x0C) #define GPIO_PAR_TIN1_TOUT1 (0x08) #define GPIO_PAR_TIN1_DACK1 (0x04) -#define GPIO_PAR_TIN0_MASK (0xFC) +#define GPIO_PAR_TIN0_UNMASK (0xFC) #define GPIO_PAR_TIN0_TIN0 (0x03) #define GPIO_PAR_TIN0_TOUT0 (0x02) #define GPIO_PAR_TIN0_CODEC_ALTCLK (0x01) @@ -455,10 +455,10 @@ #define GPIO_PAR_UART_U0RXD (0x10) #define GPIO_PAR_UART_RTS0(x) (((x) & 0x03) << 2) #define GPIO_PAR_UART_CTS0(x) ((x) & 0x03) -#define GPIO_PAR_UART_RTS0_MASK (0xF3) +#define GPIO_PAR_UART_RTS0_UNMASK (0xF3) #define GPIO_PAR_UART_RTS0_U0RTS (0x0C) #define GPIO_PAR_UART_RTS0_USBO_VBOC (0x08) -#define GPIO_PAR_UART_CTS0_MASK (0xFC) +#define GPIO_PAR_UART_CTS0_UNMASK (0xFC) #define GPIO_PAR_UART_CTS0_U0CTS (0x03) #define GPIO_PAR_UART_CTS0_USB0_VBEN (0x02) #define GPIO_PAR_UART_CTS0_USB_PULLUP (0x01) @@ -476,20 +476,20 @@ #define GPIO_PAR_SSIH_TXD(x) (((x) & 0x03) << 4) #define GPIO_PAR_SSIH_FS(x) (((x) & 0x03) << 2) #define GPIO_PAR_SSIH_MCLK(x) ((x) & 0x03) -#define GPIO_PAR_SSIH_RXD_MASK (0x3F) +#define GPIO_PAR_SSIH_RXD_UNMASK (0x3F) #define GPIO_PAR_SSIH_RXD_SSIRXD (0xC0) #define GPIO_PAR_SSIH_RXD_U1RXD (0x40) -#define GPIO_PAR_SSIH_TXD_MASK (0xCF) +#define GPIO_PAR_SSIH_TXD_UNMASK (0xCF) #define GPIO_PAR_SSIH_TXD_SSIRXD (0x30) #define GPIO_PAR_SSIH_TXD_U1TXD (0x10) -#define GPIO_PAR_SSIH_FS_MASK (0xF3) +#define GPIO_PAR_SSIH_FS_UNMASK (0xF3) #define GPIO_PAR_SSIH_FS_SSIFS (0x0C) #define GPIO_PAR_SSIH_FS_U1RTS (0x04) -#define GPIO_PAR_SSIH_MCLK_MASK (0xFC) +#define GPIO_PAR_SSIH_MCLK_UNMASK (0xFC) #define GPIO_PAR_SSIH_MCLK_SSIMCLK (0x03) #define GPIO_PAR_SSIH_MCLK_SSICLKIN (0x01) -#define GPIO_PAR_SSIL_MASK (0x3F) +#define GPIO_PAR_SSIL_UNMASK (0x3F) #define GPIO_PAR_SSIL_BCLK (0xC0) #define GPIO_PAR_SSIL_U1CTS (0x40) @@ -497,40 +497,40 @@ #define GPIO_MSCR_MSCR2(x) (((x) & 0x07) << 5) #define GPIO_MSCR_MSCR3(x) (((x) & 0x07) << 5) #define GPIO_MSCR_MSCR4(x) (((x) & 0x07) << 5) -#define GPIO_MSCR_MSCRn_MASK (0x1F) +#define GPIO_MSCR_MSCRn_UNMASK (0x1F) #define GPIO_MSCR_MSCRn_SDR (0xE0) #define GPIO_MSCR_MSCRn_25VDDR (0x60) #define GPIO_MSCR_MSCRn_18VDDR_FULL (0x20) #define GPIO_MSCR_MSCRn_18VDDR_HALF (0x00) #define GPIO_MSCR_MSCR5(x) (((x) & 0x07) << 2) -#define GPIO_MSCR_MSCR5_MASK (0xE3) +#define GPIO_MSCR_MSCR5_UNMASK (0xE3) #define GPIO_MSCR_MSCR5_SDR (0x1C) #define GPIO_MSCR_MSCR5_25VDDR (0x0C) #define GPIO_MSCR_MSCR5_18VDDR_FULL (0x04) #define GPIO_MSCR_MSCR5_18VDDR_HALF (0x00) -#define GPIO_SRCR_DSPI_MASK (0xFC) +#define GPIO_SRCR_DSPI_UNMASK (0xFC) #define GPIO_SRCR_DSPI(x) ((x) & 0x03) -#define GPIO_SRCR_I2C_MASK (0xFC) +#define GPIO_SRCR_I2C_UNMASK (0xFC) #define GPIO_SRCR_I2C(x) ((x) & 0x03) -#define GPIO_SRCR_IRQ_IRQ0_MASK (0xF3) +#define GPIO_SRCR_IRQ_IRQ0_UNMASK (0xF3) #define GPIO_SRCR_IRQ_IRQ0(x) (((x) & 0x03) << 2) -#define GPIO_SRCR_IRQ_IRQ1DBG_MASK (0xFC) +#define GPIO_SRCR_IRQ_IRQ1DBG_UNMASK (0xFC) #define GPIO_SRCR_IRQ_IRQ1DBG(x) ((x) & 0x03) -#define GPIO_SRCR_SIM_SIMP0_MASK (0xF3) +#define GPIO_SRCR_SIM_SIMP0_UNMASK (0xF3) #define GPIO_SRCR_SIM_SIMP0(x) (((x) & 0x03) << 2) -#define GPIO_SRCR_SIM_SIMP1_MASK (0xFC) +#define GPIO_SRCR_SIM_SIMP1_UNMASK (0xFC) #define GPIO_SRCR_SIM_SIMP1(x) ((x) & 0x03) -#define GPIO_SRCR_TIMER_MASK (0xFC) +#define GPIO_SRCR_TIMER_UNMASK (0xFC) #define GPIO_SRCR_TIMER(x) ((x) & 0x03) -#define GPIO_SRCR_UART2_MASK (0xF3) +#define GPIO_SRCR_UART2_UNMASK (0xF3) #define GPIO_SRCR_UART2(x) (((x) & 0x03) << 2) -#define GPIO_SRCR_UART0_MASK (0xFC) +#define GPIO_SRCR_UART0_UNMASK (0xFC) #define GPIO_SRCR_UART0(x) ((x) & 0x03) -#define GPIO_SRCR_SDHC_MASK (0xFC) +#define GPIO_SRCR_SDHC_UNMASK (0xFC) #define GPIO_SRCR_SDHC(x) ((x) & 0x03) -#define GPIO_SRCR_SSI_MASK (0xFC) +#define GPIO_SRCR_SSI_UNMASK (0xFC) #define GPIO_SRCR_SSI(x) ((x) & 0x03) #define SRCR_HIGHEST (0x03) @@ -538,11 +538,11 @@ #define SRCR_LOW (0x01) #define SRCR_LOWEST (0x00) -#define GPIO_DSCR_FEC_RMIICLK_MASK (0xCF) +#define GPIO_DSCR_FEC_RMIICLK_UNMASK (0xCF) #define GPIO_DSCR_FEC_RMIICLK(x) (((x) & 0x03) << 4) -#define GPIO_DSCR_FEC_RMII0_MASK (0xF3) +#define GPIO_DSCR_FEC_RMII0_UNMASK (0xF3) #define GPIO_DSCR_FEC_RMII0(x) (((x) & 0x03) << 2) -#define GPIO_DSCR_FEC_RMII1_MASK (0xFC) +#define GPIO_DSCR_FEC_RMII1_UNMASK (0xFC) #define GPIO_DSCR_FEC_RMII1(x) ((x) & 0x03) #define DSCR_50PF (0x03) @@ -572,18 +572,18 @@ #define PLL_PCR_LOL_IRQ (0x00004000) #define PLL_PCR_LOL_RE (0x00002000) #define PLL_PCR_LOL_EN (0x00001000) -#define PLL_PCR_REFDIV_MASK (0xFFFFF8FF) +#define PLL_PCR_REFDIV_UNMASK (0xFFFFF8FF) #define PLL_PCR_REFDIV(x) (((x) & 0x07) << 8) -#define PLL_PCR_FBDIV_MASK (0xFFFFFFC0) +#define PLL_PCR_FBDIV_UNMASK (0xFFFFFFC0) #define PLL_PCR_FBDIV(x) ((x) & 0x3F) -#define PLL_PDR_OUTDIV4_MASK (0x0FFF) +#define PLL_PDR_OUTDIV4_UNMASK (0x0FFF) #define PLL_PDR_OUTDIV4(x) (((x) & 0x0000000F) << 12) -#define PLL_PDR_OUTDIV3_MASK (0xF0FF) +#define PLL_PDR_OUTDIV3_UNMASK (0xF0FF) #define PLL_PDR_OUTDIV3(x) (((x) & 0x0000000F) << 8) -#define PLL_PDR_OUTDIV2_MASK (0xFF0F) +#define PLL_PDR_OUTDIV2_UNMASK (0xFF0F) #define PLL_PDR_OUTDIV2(x) (((x) & 0x0000000F) << 4) -#define PLL_PDR_OUTDIV1_MASK (0xFFF0) +#define PLL_PDR_OUTDIV1_UNMASK (0xFFF0) #define PLL_PDR_OUTDIV1(x) ((x) & 0x0000000F) #define PLL_PDR_USB(x) PLL_PDR_OUTDIV4(x) #define PLL_PDR_SDRAM(x) PLL_PDR_OUTDIV3(x) diff --git a/include/asm-m68k/m5445x.h b/include/asm-m68k/m5445x.h index 596662191ce..dfddde62ad3 100644 --- a/include/asm-m68k/m5445x.h +++ b/include/asm-m68k/m5445x.h @@ -286,13 +286,13 @@ /* Bit definitions and macros for PAR_FEC */ #define GPIO_PAR_FEC_FEC0(x) (((x)&0x07)) #define GPIO_PAR_FEC_FEC1(x) (((x)&0x07)<<4) -#define GPIO_PAR_FEC_FEC1_MASK (0x8F) +#define GPIO_PAR_FEC_FEC1_UNMASK (0x8F) #define GPIO_PAR_FEC_FEC1_MII (0x70) #define GPIO_PAR_FEC_FEC1_RMII_GPIO (0x30) #define GPIO_PAR_FEC_FEC1_RMII_ATA (0x20) #define GPIO_PAR_FEC_FEC1_ATA (0x10) #define GPIO_PAR_FEC_FEC1_GPIO (0x00) -#define GPIO_PAR_FEC_FEC0_MASK (0xF8) +#define GPIO_PAR_FEC_FEC0_UNMASK (0xF8) #define GPIO_PAR_FEC_FEC0_MII (0x07) #define GPIO_PAR_FEC_FEC0_RMII_GPIO (0x03) #define GPIO_PAR_FEC_FEC0_RMII_ULPI (0x02) @@ -304,15 +304,15 @@ #define GPIO_PAR_DMA_DACK0(x) (((x)&0x03)<<2) #define GPIO_PAR_DMA_DREQ1(x) (((x)&0x03)<<4) #define GPIO_PAR_DMA_DACK1(x) (((x)&0x03)<<6) -#define GPIO_PAR_DMA_DACK1_MASK (0x3F) +#define GPIO_PAR_DMA_DACK1_UNMASK (0x3F) #define GPIO_PAR_DMA_DACK1_DACK1 (0xC0) #define GPIO_PAR_DMA_DACK1_ULPI_DIR (0x40) #define GPIO_PAR_DMA_DACK1_GPIO (0x00) -#define GPIO_PAR_DMA_DREQ1_MASK (0xCF) +#define GPIO_PAR_DMA_DREQ1_UNMASK (0xCF) #define GPIO_PAR_DMA_DREQ1_DREQ1 (0x30) #define GPIO_PAR_DMA_DREQ1_USB_CLKIN (0x10) #define GPIO_PAR_DMA_DREQ1_GPIO (0x00) -#define GPIO_PAR_DMA_DACK0_MASK (0xF3) +#define GPIO_PAR_DMA_DACK0_UNMASK (0xF3) #define GPIO_PAR_DMA_DACK0_DACK1 (0x0C) #define GPIO_PAR_DMA_DACK0_ULPI_DIR (0x04) #define GPIO_PAR_DMA_DACK0_GPIO (0x00) @@ -330,7 +330,7 @@ #define GPIO_PAR_FBCTL_TA_GPIO (0x00) #define GPIO_PAR_FBCTL_RW_RW (0x20) #define GPIO_PAR_FBCTL_RW_GPIO (0x00) -#define GPIO_PAR_FBCTL_TS_MASK (0xE7) +#define GPIO_PAR_FBCTL_TS_UNMASK (0xE7) #define GPIO_PAR_FBCTL_TS_TS (0x18) #define GPIO_PAR_FBCTL_TS_ALE (0x10) #define GPIO_PAR_FBCTL_TS_TBST (0x08) @@ -364,11 +364,11 @@ #define GPIO_PAR_BE_BS1 (0x04) #define GPIO_PAR_BE_BS2(x) (((x)&0x03)<<4) #define GPIO_PAR_BE_BS3(x) (((x)&0x03)<<6) -#define GPIO_PAR_BE_BE3_MASK (0x3F) +#define GPIO_PAR_BE_BE3_UNMASK (0x3F) #define GPIO_PAR_BE_BE3_BE3 (0xC0) #define GPIO_PAR_BE_BE3_TSIZ1 (0x80) #define GPIO_PAR_BE_BE3_GPIO (0x00) -#define GPIO_PAR_BE_BE2_MASK (0xCF) +#define GPIO_PAR_BE_BE2_UNMASK (0xCF) #define GPIO_PAR_BE_BE2_BE2 (0x30) #define GPIO_PAR_BE_BE2_TSIZ0 (0x20) #define GPIO_PAR_BE_BE2_GPIO (0x00) @@ -393,22 +393,22 @@ #define GPIO_PAR_TIMER_T1IN(x) (((x)&0x03)<<2) #define GPIO_PAR_TIMER_T2IN(x) (((x)&0x03)<<4) #define GPIO_PAR_TIMER_T3IN(x) (((x)&0x03)<<6) -#define GPIO_PAR_TIMER_T3IN_MASK (0x3F) +#define GPIO_PAR_TIMER_T3IN_UNMASK (0x3F) #define GPIO_PAR_TIMER_T3IN_T3IN (0xC0) #define GPIO_PAR_TIMER_T3IN_T3OUT (0x80) #define GPIO_PAR_TIMER_T3IN_U2RXD (0x40) #define GPIO_PAR_TIMER_T3IN_GPIO (0x00) -#define GPIO_PAR_TIMER_T2IN_MASK (0xCF) +#define GPIO_PAR_TIMER_T2IN_UNMASK (0xCF) #define GPIO_PAR_TIMER_T2IN_T2IN (0x30) #define GPIO_PAR_TIMER_T2IN_T2OUT (0x20) #define GPIO_PAR_TIMER_T2IN_U2TXD (0x10) #define GPIO_PAR_TIMER_T2IN_GPIO (0x00) -#define GPIO_PAR_TIMER_T1IN_MASK (0xF3) +#define GPIO_PAR_TIMER_T1IN_UNMASK (0xF3) #define GPIO_PAR_TIMER_T1IN_T1IN (0x0C) #define GPIO_PAR_TIMER_T1IN_T1OUT (0x08) #define GPIO_PAR_TIMER_T1IN_U2CTS (0x04) #define GPIO_PAR_TIMER_T1IN_GPIO (0x00) -#define GPIO_PAR_TIMER_T0IN_MASK (0xFC) +#define GPIO_PAR_TIMER_T0IN_UNMASK (0xFC) #define GPIO_PAR_TIMER_T0IN_T0IN (0x03) #define GPIO_PAR_TIMER_T0IN_T0OUT (0x02) #define GPIO_PAR_TIMER_T0IN_U2RTS (0x01) @@ -417,12 +417,12 @@ /* Bit definitions and macros for PAR_USB */ #define GPIO_PAR_USB_VBUSOC(x) (((x)&0x03)) #define GPIO_PAR_USB_VBUSEN(x) (((x)&0x03)<<2) -#define GPIO_PAR_USB_VBUSEN_MASK (0xF3) +#define GPIO_PAR_USB_VBUSEN_UNMASK (0xF3) #define GPIO_PAR_USB_VBUSEN_VBUSEN (0x0C) #define GPIO_PAR_USB_VBUSEN_USBPULLUP (0x08) #define GPIO_PAR_USB_VBUSEN_ULPI_NXT (0x04) #define GPIO_PAR_USB_VBUSEN_GPIO (0x00) -#define GPIO_PAR_USB_VBUSOC_MASK (0xFC) +#define GPIO_PAR_USB_VBUSOC_UNMASK (0xFC) #define GPIO_PAR_USB_VBUSOC_VBUSOC (0x03) #define GPIO_PAR_USB_VBUSOC_ULPI_STP (0x01) #define GPIO_PAR_USB_VBUSOC_GPIO (0x00) @@ -460,11 +460,11 @@ #define GPIO_PAR_FECI2C_MDC0 (0x0040) #define GPIO_PAR_FECI2C_MDIO1(x) (((x)&0x0003)<<8) #define GPIO_PAR_FECI2C_MDC1(x) (((x)&0x0003)<<10) -#define GPIO_PAR_FECI2C_MDC1_MASK (0xF3FF) +#define GPIO_PAR_FECI2C_MDC1_UNMASK (0xF3FF) #define GPIO_PAR_FECI2C_MDC1_MDC1 (0x0C00) #define GPIO_PAR_FECI2C_MDC1_ATA_DIOR (0x0800) #define GPIO_PAR_FECI2C_MDC1_GPIO (0x0000) -#define GPIO_PAR_FECI2C_MDIO1_MASK (0xFCFF) +#define GPIO_PAR_FECI2C_MDIO1_UNMASK (0xFCFF) #define GPIO_PAR_FECI2C_MDIO1_MDIO1 (0x0300) #define GPIO_PAR_FECI2C_MDIO1_ATA_DIOW (0x0200) #define GPIO_PAR_FECI2C_MDIO1_GPIO (0x0000) @@ -472,11 +472,11 @@ #define GPIO_PAR_FECI2C_MDC0_GPIO (0x0000) #define GPIO_PAR_FECI2C_MDIO0_MDIO0 (0x0010) #define GPIO_PAR_FECI2C_MDIO0_GPIO (0x0000) -#define GPIO_PAR_FECI2C_SCL_MASK (0xFFF3) +#define GPIO_PAR_FECI2C_SCL_UNMASK (0xFFF3) #define GPIO_PAR_FECI2C_SCL_SCL (0x000C) #define GPIO_PAR_FECI2C_SCL_U2TXD (0x0004) #define GPIO_PAR_FECI2C_SCL_GPIO (0x0000) -#define GPIO_PAR_FECI2C_SDA_MASK (0xFFFC) +#define GPIO_PAR_FECI2C_SDA_UNMASK (0xFFFC) #define GPIO_PAR_FECI2C_SDA_SDA (0x0003) #define GPIO_PAR_FECI2C_SDA_U2RXD (0x0001) #define GPIO_PAR_FECI2C_SDA_GPIO (0x0000) @@ -487,19 +487,19 @@ #define GPIO_PAR_SSI_SRXD(x) (((x)&0x0003)<<4) #define GPIO_PAR_SSI_FS(x) (((x)&0x0003)<<6) #define GPIO_PAR_SSI_BCLK(x) (((x)&0x0003)<<8) -#define GPIO_PAR_SSI_BCLK_MASK (0xFCFF) +#define GPIO_PAR_SSI_BCLK_UNMASK (0xFCFF) #define GPIO_PAR_SSI_BCLK_BCLK (0x0300) #define GPIO_PAR_SSI_BCLK_U1CTS (0x0200) #define GPIO_PAR_SSI_BCLK_GPIO (0x0000) -#define GPIO_PAR_SSI_FS_MASK (0xFF3F) +#define GPIO_PAR_SSI_FS_UNMASK (0xFF3F) #define GPIO_PAR_SSI_FS_FS (0x00C0) #define GPIO_PAR_SSI_FS_U1RTS (0x0080) #define GPIO_PAR_SSI_FS_GPIO (0x0000) -#define GPIO_PAR_SSI_SRXD_MASK (0xFFCF) +#define GPIO_PAR_SSI_SRXD_UNMASK (0xFFCF) #define GPIO_PAR_SSI_SRXD_SRXD (0x0030) #define GPIO_PAR_SSI_SRXD_U1RXD (0x0020) #define GPIO_PAR_SSI_SRXD_GPIO (0x0000) -#define GPIO_PAR_SSI_STXD_MASK (0xFFF3) +#define GPIO_PAR_SSI_STXD_UNMASK (0xFFF3) #define GPIO_PAR_SSI_STXD_STXD (0x000C) #define GPIO_PAR_SSI_STXD_U1TXD (0x0008) #define GPIO_PAR_SSI_STXD_GPIO (0x0000) @@ -552,7 +552,7 @@ #define GPIO_PAR_PCI_GNT1 (0x0400) #define GPIO_PAR_PCI_GNT2 (0x1000) #define GPIO_PAR_PCI_GNT3(x) (((x)&0x0003)<<14) -#define GPIO_PAR_PCI_GNT3_MASK (0x3FFF) +#define GPIO_PAR_PCI_GNT3_UNMASK (0x3FFF) #define GPIO_PAR_PCI_GNT3_GNT3 (0xC000) #define GPIO_PAR_PCI_GNT3_ATA_DMACK (0x8000) #define GPIO_PAR_PCI_GNT3_GPIO (0x0000) @@ -562,7 +562,7 @@ #define GPIO_PAR_PCI_GNT1_GPIO (0x0000) #define GPIO_PAR_PCI_GNT0_GNT0 (0x0100) #define GPIO_PAR_PCI_GNT0_GPIO (0x0000) -#define GPIO_PAR_PCI_REQ3_MASK (0xFF3F) +#define GPIO_PAR_PCI_REQ3_UNMASK (0xFF3F) #define GPIO_PAR_PCI_REQ3_REQ3 (0x00C0) #define GPIO_PAR_PCI_REQ3_ATA_INTRQ (0x0080) #define GPIO_PAR_PCI_REQ3_GPIO (0x0000) @@ -578,22 +578,22 @@ #define GPIO_MSCR_SDRAM_SDCLK(x) (((x)&0x03)<<2) #define GPIO_MSCR_SDRAM_SDDQS(x) (((x)&0x03)<<4) #define GPIO_MSCR_SDRAM_SDDATA(x) (((x)&0x03)<<6) -#define GPIO_MSCR_SDRAM_SDDATA_MASK (0x3F) +#define GPIO_MSCR_SDRAM_SDDATA_UNMASK (0x3F) #define GPIO_MSCR_SDRAM_SDDATA_DDR1 (0xC0) #define GPIO_MSCR_SDRAM_SDDATA_DDR2 (0x80) #define GPIO_MSCR_SDRAM_SDDATA_FS_LPDDR (0x40) #define GPIO_MSCR_SDRAM_SDDATA_HS_LPDDR (0x00) -#define GPIO_MSCR_SDRAM_SDDQS_MASK (0xCF) +#define GPIO_MSCR_SDRAM_SDDQS_UNMASK (0xCF) #define GPIO_MSCR_SDRAM_SDDQS_DDR1 (0x30) #define GPIO_MSCR_SDRAM_SDDQS_DDR2 (0x20) #define GPIO_MSCR_SDRAM_SDDQS_FS_LPDDR (0x10) #define GPIO_MSCR_SDRAM_SDDQS_HS_LPDDR (0x00) -#define GPIO_MSCR_SDRAM_SDCLK_MASK (0xF3) +#define GPIO_MSCR_SDRAM_SDCLK_UNMASK (0xF3) #define GPIO_MSCR_SDRAM_SDCLK_DDR1 (0x0C) #define GPIO_MSCR_SDRAM_SDCLK_DDR2 (0x08) #define GPIO_MSCR_SDRAM_SDCLK_FS_LPDDR (0x04) #define GPIO_MSCR_SDRAM_SDCLK_HS_LPDDR (0x00) -#define GPIO_MSCR_SDRAM_SDCTL_MASK (0xFC) +#define GPIO_MSCR_SDRAM_SDCTL_UNMASK (0xFC) #define GPIO_MSCR_SDRAM_SDCTL_DDR1 (0x03) #define GPIO_MSCR_SDRAM_SDCTL_DDR2 (0x02) #define GPIO_MSCR_SDRAM_SDCTL_FS_LPDDR (0x01) -- cgit v1.3.1 From 52affe04fa5493597d8a5f6202507190950a32e6 Mon Sep 17 00:00:00 2001 From: TsiChung Liew Date: Tue, 9 Mar 2010 19:17:52 -0600 Subject: ColdFire: Update processors' serial port configuration Provide parameter passing to uart_port_config(). Update port configuration - un-mask it before enable the bits. Signed-off-by: TsiChung Liew --- cpu/mcf5227x/cpu_init.c | 4 +-- cpu/mcf523x/cpu_init.c | 26 +++++++++++++----- cpu/mcf52x2/cpu_init.c | 61 +++++++++++++++++++++++-------------------- cpu/mcf532x/cpu_init.c | 29 ++++++++++++++------ cpu/mcf5445x/cpu_init.c | 32 ++++++++++++++++++++--- cpu/mcf547x_8x/cpu_init.c | 4 +-- include/asm-m68k/immap_5253.h | 1 + 7 files changed, 106 insertions(+), 51 deletions(-) (limited to 'cpu') diff --git a/cpu/mcf5227x/cpu_init.c b/cpu/mcf5227x/cpu_init.c index d336857edf8..beb78f58393 100644 --- a/cpu/mcf5227x/cpu_init.c +++ b/cpu/mcf5227x/cpu_init.c @@ -125,12 +125,12 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { + switch (port) { case 0: gpio->par_uart &= (GPIO_PAR_UART_U0TXD_UNMASK & GPIO_PAR_UART_U0RXD_UNMASK); diff --git a/cpu/mcf523x/cpu_init.c b/cpu/mcf523x/cpu_init.c index 3c04fd41346..0f299f0c3c5 100644 --- a/cpu/mcf523x/cpu_init.c +++ b/cpu/mcf523x/cpu_init.c @@ -130,21 +130,32 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { + switch (port) { case 0: - gpio->par_uart = (GPIO_PAR_UART_U0RXD | GPIO_PAR_UART_U0TXD); + gpio->par_uart &= ~(GPIO_PAR_UART_U0RXD | GPIO_PAR_UART_U0TXD); + gpio->par_uart |= (GPIO_PAR_UART_U0RXD | GPIO_PAR_UART_U0TXD); break; case 1: - gpio->par_uart = - (GPIO_PAR_UART_U1RXD_U1RXD | GPIO_PAR_UART_U1TXD_U1TXD); + gpio->par_uart &= + ~(GPIO_PAR_UART_U1RXD_MASK | GPIO_PAR_UART_U1TXD_MASK); + gpio->par_uart |= + (GPIO_PAR_UART_U1RXD_U1RXD | GPIO_PAR_UART_U1TXD_U1TXD); break; case 2: - gpio->par_timer = (GPIO_PAR_UART_U2RXD | GPIO_PAR_UART_U2TXD); +#ifdef CONFIG_SYS_UART2_PRI_GPIO + gpio->par_uart &= ~(GPIO_PAR_UART_U2RXD | GPIO_PAR_UART_U2TXD); + gpio->par_uart |= (GPIO_PAR_UART_U2RXD | GPIO_PAR_UART_U2TXD); +#elif defined(CONFIG_SYS_UART2_ALT1_GPIO) + gpio->feci2c &= + ~(GPIO_PAR_FECI2C_EMDC_MASK | GPIO_PAR_FECI2C_EMDIO_MASK); + gpio->feci2c |= + (GPIO_PAR_FECI2C_EMDC_U2TXD | GPIO_PAR_FECI2C_EMDIO_U2RXD); +#endif break; } } @@ -156,7 +167,8 @@ int fecpin_setclear(struct eth_device *dev, int setclear) if (setclear) { gpio->par_feci2c |= - (GPIO_PAR_FECI2C_EMDC_FECEMDC | GPIO_PAR_FECI2C_EMDIO_FECEMDIO); + (GPIO_PAR_FECI2C_EMDC_FECEMDC | + GPIO_PAR_FECI2C_EMDIO_FECEMDIO); } else { gpio->par_feci2c &= ~(GPIO_PAR_FECI2C_EMDC_MASK | GPIO_PAR_FECI2C_EMDIO_MASK); diff --git a/cpu/mcf52x2/cpu_init.c b/cpu/mcf52x2/cpu_init.c index 747c1cf90dc..170bbfc356c 100644 --- a/cpu/mcf52x2/cpu_init.c +++ b/cpu/mcf52x2/cpu_init.c @@ -135,12 +135,12 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { + switch (port) { case 0: gpio->par_uart &= GPIO_PAR_UART0_UNMASK; gpio->par_uart |= (GPIO_PAR_UART_U0TXD | GPIO_PAR_UART_U0RXD); @@ -247,15 +247,19 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { + volatile u32 *par = (u32 *) MMAP_PAR; + /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { - case 0: - break; + switch (port) { case 1: + *par &= 0xFFE7FFFF; + *par |= 0x00180000; break; case 2: + *par &= 0xFFFFFFFC; + *par &= 0x00000003; break; } } @@ -291,21 +295,26 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { + u16 temp; + /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { + switch (port) { case 0: - mbar_writeShort(MCF_GPIO_PAR_UART, MCF_GPIO_PAR_UART_U0TXD | - MCF_GPIO_PAR_UART_U0RXD); + temp = mbar_readShort(MCF_GPIO_PAR_UART) & 0xFFF3; + temp |= (MCF_GPIO_PAR_UART_U0TXD | MCF_GPIO_PAR_UART_U0RXD); + mbar_writeShort(MCF_GPIO_PAR_UART, temp); break; case 1: - mbar_writeShort(MCF_GPIO_PAR_UART, - MCF_GPIO_PAR_UART_U1RXD_UART1 | - MCF_GPIO_PAR_UART_U1TXD_UART1); + temp = mbar_readShort(MCF_GPIO_PAR_UART) & 0xF0FF; + temp |= (MCF_GPIO_PAR_UART_U1RXD_UART1 | MCF_GPIO_PAR_UART_U1TXD_UART1); + mbar_writeShort(MCF_GPIO_PAR_UART, temp); break; case 2: - mbar_writeShort(MCF_GPIO_PAR_UART, 0x3000); + temp = mbar_readShort(MCF_GPIO_PAR_UART) & 0xCFFF; + temp |= (0x3000); + mbar_writeShort(MCF_GPIO_PAR_UART, temp); break; } } @@ -409,12 +418,12 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { + switch (port) { case 0: gpio->gpio_pbcnt &= ~(GPIO_PBCNT_PB0MSK | GPIO_PBCNT_PB1MSK); gpio->gpio_pbcnt |= (GPIO_PBCNT_URT0_TXD | GPIO_PBCNT_URT0_RXD); @@ -487,19 +496,22 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { + switch (port) { case 0: + gpio->par_uart &= ~UART0_ENABLE_MASK; gpio->par_uart |= UART0_ENABLE_MASK; break; case 1: + gpio->par_uart &= ~UART1_ENABLE_MASK; gpio->par_uart |= UART1_ENABLE_MASK; break; case 2: + gpio->par_uart &= ~UART2_ENABLE_MASK; gpio->par_uart |= UART2_ENABLE_MASK; break; } @@ -621,10 +633,10 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { + switch (port) { case 0: MCFGPIO_PUAPAR &= 0xFc; MCFGPIO_PUAPAR |= 0x03; @@ -729,14 +741,7 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { - /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { - case 0: - break; - case 1: - break; - } } #endif /* #if defined(CONFIG_M5249) */ diff --git a/cpu/mcf532x/cpu_init.c b/cpu/mcf532x/cpu_init.c index 04160a82943..6f551b60c92 100644 --- a/cpu/mcf532x/cpu_init.c +++ b/cpu/mcf532x/cpu_init.c @@ -133,19 +133,21 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { + switch (port) { case 0: - gpio->par_uart = (GPIO_PAR_UART_U0TXD | GPIO_PAR_UART_U0RXD); + gpio->par_uart &= ~(GPIO_PAR_UART_U0TXD | GPIO_PAR_UART_U0RXD); + gpio->par_uart |= (GPIO_PAR_UART_U0TXD | GPIO_PAR_UART_U0RXD); break; case 1: #ifdef CONFIG_SYS_UART1_ALT1_GPIO gpio->par_simp1h &= - ~(GPIO_PAR_SIMP1H_DATA1_UNMASK | GPIO_PAR_SIMP1H_VEN1_UNMASK); + ~(GPIO_PAR_SIMP1H_DATA1_UNMASK | + GPIO_PAR_SIMP1H_VEN1_UNMASK); gpio->par_simp1h |= (GPIO_PAR_SIMP1H_DATA1_U1TXD | GPIO_PAR_SIMP1H_VEN1_U1RXD); #elif defined(CONFIG_SYS_UART1_ALT2_GPIO) @@ -297,22 +299,33 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { + switch (port) { case 0: - gpio->par_uart = (GPIO_PAR_UART_TXD0 | GPIO_PAR_UART_RXD0); + gpio->par_uart &= ~(GPIO_PAR_UART_TXD0 | GPIO_PAR_UART_RXD0); + gpio->par_uart |= (GPIO_PAR_UART_TXD0 | GPIO_PAR_UART_RXD0); break; case 1: - gpio->par_uart = + gpio->par_uart &= + ~(GPIO_PAR_UART_TXD1(3) | GPIO_PAR_UART_RXD1(3)); + gpio->par_uart |= (GPIO_PAR_UART_TXD1(3) | GPIO_PAR_UART_RXD1(3)); break; case 2: +#ifdef CONFIG_SYS_UART2_ALT1_GPIO gpio->par_timer &= 0x0F; gpio->par_timer |= (GPIO_PAR_TIN3_URXD2 | GPIO_PAR_TIN2_UTXD2); +#elif defined(CONFIG_SYS_UART2_ALT2_GPIO) + gpio->par_feci2c &= 0xFF00; + gpio->par_feci2c |= (GPIO_PAR_FECI2C_SCL_UTXD2 | GPIO_PAR_FECI2C_SDA_URXD2); +#elif defined(CONFIG_SYS_UART2_ALT3_GPIO) + gpio->par_ssi &= 0xF0FF; + gpio->par_ssi |= (GPIO_PAR_SSI_RXD(2) | GPIO_PAR_SSI_TXD(2)); +#endif break; } } diff --git a/cpu/mcf5445x/cpu_init.c b/cpu/mcf5445x/cpu_init.c index 00b7910ccd5..00e0ca6da92 100644 --- a/cpu/mcf5445x/cpu_init.c +++ b/cpu/mcf5445x/cpu_init.c @@ -128,19 +128,43 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { + switch (port) { case 0: - gpio->par_uart = + gpio->par_uart &= + ~(GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD); + gpio->par_uart |= (GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD); break; case 1: - gpio->par_uart = +#ifdef CONFIG_SYS_UART1_PRI_GPIO + gpio->par_uart &= + ~(GPIO_PAR_UART_U1TXD_U1TXD | GPIO_PAR_UART_U1RXD_U1RXD); + gpio->par_uart |= (GPIO_PAR_UART_U1TXD_U1TXD | GPIO_PAR_UART_U1RXD_U1RXD); +#elif defined(CONFIG_SYS_UART1_ALT1_GPIO) + gpio->par_ssi &= + (GPIO_PAR_SSI_SRXD_UNMASK | GPIO_PAR_SSI_STXD_UNMASK); + gpio->par_ssi |= + (GPIO_PAR_SSI_SRXD_U1RXD | GPIO_PAR_SSI_STXD_U1TXD); +#endif + break; + case 2: +#if defined(CONFIG_SYS_UART2_ALT1_GPIO) + gpio->par_timer &= + (GPIO_PAR_TIMER_T3IN_UNMASK | GPIO_PAR_TIMER_T2IN_UNMASK); + gpio->par_timer |= + (GPIO_PAR_TIMER_T3IN_U2RXD | GPIO_PAR_TIMER_T2IN_U2TXD); +#elif defined(CONFIG_SYS_UART2_ALT2_GPIO) + gpio->par_timer &= + (GPIO_PAR_FECI2C_SCL_UNMASK | GPIO_PAR_FECI2C_SDA_UNMASK); + gpio->par_timer |= + (GPIO_PAR_FECI2C_SCL_U2TXD | GPIO_PAR_FECI2C_SDA_U2RXD); +#endif break; } } diff --git a/cpu/mcf547x_8x/cpu_init.c b/cpu/mcf547x_8x/cpu_init.c index 96a3132b783..60c91267a72 100644 --- a/cpu/mcf547x_8x/cpu_init.c +++ b/cpu/mcf547x_8x/cpu_init.c @@ -113,13 +113,13 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; volatile u8 *pscsicr = (u8 *) (CONFIG_SYS_UART_BASE + 0x40); /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { + switch (port) { case 0: gpio->par_psc0 = (GPIO_PAR_PSC0_TXD0 | GPIO_PAR_PSC0_RXD0); break; diff --git a/include/asm-m68k/immap_5253.h b/include/asm-m68k/immap_5253.h index b5a4cb54a74..28cd107a82a 100644 --- a/include/asm-m68k/immap_5253.h +++ b/include/asm-m68k/immap_5253.h @@ -37,6 +37,7 @@ #define MMAP_CAN0 (CONFIG_SYS_MBAR + 0x00010000) #define MMAP_CAN1 (CONFIG_SYS_MBAR + 0x00011000) +#define MMAP_PAR (CONFIG_SYS_MBAR2 + 0x0000019C) #define MMAP_I2C1 (CONFIG_SYS_MBAR2 + 0x00000440) #define MMAP_UART2 (CONFIG_SYS_MBAR2 + 0x00000C00) -- cgit v1.3.1 From 68e4e76af55746a4330865f56476e58ce4140ca8 Mon Sep 17 00:00:00 2001 From: TsiChung Liew Date: Thu, 11 Mar 2010 15:04:21 -0600 Subject: ColdFire: Relocate vector table - mcf5445x Newer ColdFire processors family boot from address 0 instead of 0xFFnn_nnnn. When the boot flash base chip select is set at new location instead of 0, an un-predictable error will occur if there is an vector being trigger and refer it to an invalid address or the vector table handler is not existed at address 0. Signed-off-by: TsiChung Liew --- cpu/mcf5445x/cpu_init.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'cpu') diff --git a/cpu/mcf5445x/cpu_init.c b/cpu/mcf5445x/cpu_init.c index 00e0ca6da92..8d51d35d685 100644 --- a/cpu/mcf5445x/cpu_init.c +++ b/cpu/mcf5445x/cpu_init.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #if defined(CONFIG_CMD_NET) @@ -105,6 +106,14 @@ void cpu_init_f(void) fbcs->csmr5 = CONFIG_SYS_CS5_MASK; #endif + /* + * now the flash base address is no longer at 0 (Newer ColdFire family + * boot at address 0 instead of 0xFFnn_nnnn). The vector table must + * also move to the new location. + */ + if (CONFIG_SYS_CS0_BASE != 0) + setvbr(CONFIG_SYS_CS0_BASE); + #ifdef CONFIG_FSL_I2C gpio->par_feci2c = GPIO_PAR_FECI2C_SCL_SCL | GPIO_PAR_FECI2C_SDA_SDA; #endif -- cgit v1.3.1 From f9d877a6479878ca96688671f37d87b620c3e77c Mon Sep 17 00:00:00 2001 From: TsiChung Liew Date: Wed, 10 Mar 2010 17:32:13 -0600 Subject: ColdFire: Add CPU compile flag for mcf5301x and mcf532x Add CPU compile flag -mcpu=53015 in cpu/config.mk Signed-off-by: TsiChung Liew --- cpu/mcf532x/config.mk | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'cpu') diff --git a/cpu/mcf532x/config.mk b/cpu/mcf532x/config.mk index 0cb90ac4e2e..b783444ae83 100644 --- a/cpu/mcf532x/config.mk +++ b/cpu/mcf532x/config.mk @@ -24,8 +24,20 @@ # PLATFORM_RELFLAGS += -ffixed-d7 -msep-data + +cfg=$(shell grep configs $(OBJTREE)/include/config.h | sed 's/.*<\(configs.*\)>/\1/') +is5301x:=$(shell grep CONFIG_MCF5301x $(TOPDIR)/include/$(cfg)) +is532x:=$(shell grep CONFIG_MCF532x $(TOPDIR)/include/$(cfg)) + ifneq ($(findstring 4.1,$(shell $(CC) --version)),4.1) + +ifneq (,$(findstring CONFIG_MCF5301x,$(is5301x))) +PLATFORM_CPPFLAGS += -mcpu=53015 -fPIC +endif +ifneq (,$(findstring CONFIG_MCF532x,$(is532x))) PLATFORM_CPPFLAGS += -mcpu=5329 -fPIC +endif + else PLATFORM_CPPFLAGS += -m5307 -fPIC endif -- cgit v1.3.1 From 9e8e927023582231b034e199568e49f84ac032a9 Mon Sep 17 00:00:00 2001 From: TsiChung Liew Date: Wed, 10 Mar 2010 18:24:07 -0600 Subject: ColdFire: Misc update for M53017 Reside Ethernet buffer descriptors in SRAM instead of DRAM. Add CONFIG_SYS_TX_ETH_BUFFER in platform configuration file. Update DRAM control and SRAM control register setting. Update cache setting where size does not write to proper region. Signed-off-by: TsiChung Liew Signed-off-by: Jason Jin --- cpu/mcf532x/start.S | 2 +- include/configs/M53017EVB.h | 6 ++++-- 2 files changed, 5 insertions(+), 3 deletions(-) (limited to 'cpu') diff --git a/cpu/mcf532x/start.S b/cpu/mcf532x/start.S index 5b134aa47c2..5abd944eb42 100644 --- a/cpu/mcf532x/start.S +++ b/cpu/mcf532x/start.S @@ -284,7 +284,7 @@ _int_handler: icache_enable: move.l #0x01000000, %d0 /* Invalidate cache cmd */ movec %d0, %CACR /* Invalidate cache */ - move.l #(CONFIG_SYS_SDRAM_BASE + 0xc000 + ((CONFIG_SYS_SDRAM_SIZE & 0x1fe0) << 11)), %d0 + move.l #(CONFIG_SYS_SDRAM_BASE + 0xc000 + ((CONFIG_SYS_SDRAM_SIZE & 0x1fe0 - 1) << 16)), %d0 movec %d0, %ACR0 /* Enable cache */ move.l #0x80000200, %d0 /* Setup cache mask */ diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h index 30855bdaa21..c351d415cf3 100644 --- a/include/configs/M53017EVB.h +++ b/include/configs/M53017EVB.h @@ -69,6 +69,8 @@ # define CONFIG_MII_INIT 1 # define CONFIG_SYS_DISCOVER_PHY # define CONFIG_SYS_RX_ETH_BUFFER 8 +# define CONFIG_SYS_TX_ETH_BUFFER 8 +# define CONFIG_SYS_FEC_BUF_USE_SRAM # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN # define CONFIG_HAS_ETH1 @@ -166,7 +168,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 #define CONFIG_SYS_INIT_RAM_END 0x20000 /* End of used area in internal SRAM */ -#define CONFIG_SYS_INIT_RAM_CTRL 0x21 +#define CONFIG_SYS_INIT_RAM_CTRL 0x221 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ #define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 0x10) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET @@ -180,7 +182,7 @@ #define CONFIG_SYS_SDRAM_SIZE 64 /* SDRAM size in MB */ #define CONFIG_SYS_SDRAM_CFG1 0x43711630 #define CONFIG_SYS_SDRAM_CFG2 0x56670000 -#define CONFIG_SYS_SDRAM_CTRL 0xE1002000 +#define CONFIG_SYS_SDRAM_CTRL 0xE1092000 #define CONFIG_SYS_SDRAM_EMOD 0x80010000 #define CONFIG_SYS_SDRAM_MODE 0x00CD0000 -- cgit v1.3.1 From dd9f054ede433de73b137987fb3dc066e8d24ebb Mon Sep 17 00:00:00 2001 From: TsiChung Liew Date: Thu, 11 Mar 2010 22:12:53 -0600 Subject: ColdFire: Cache update for all platforms The CF will call cache functions in lib_m68/cache.c and the cache settings are defined in platform configuration file. Signed-off-by: TsiChung Liew --- cpu/mcf5227x/start.S | 100 ++----------------- cpu/mcf523x/start.S | 75 +------------- cpu/mcf52x2/start.S | 176 ++------------------------------ cpu/mcf532x/start.S | 72 +------------- cpu/mcf5445x/start.S | 123 ++--------------------- cpu/mcf547x_8x/start.S | 83 +--------------- include/asm-m68k/cache.h | 210 +++++++++++++++++++++++++++++++++++++++ include/configs/EB+MCF-EV123.h | 12 +++ include/configs/M5208EVBE.h | 13 +++ include/configs/M52277EVB.h | 13 +++ include/configs/M5235EVB.h | 12 +++ include/configs/M5249EVB.h | 15 +++ include/configs/M5253DEMO.h | 15 +++ include/configs/M5253EVBE.h | 15 +++ include/configs/M5271EVB.h | 14 +++ include/configs/M5272C3.h | 14 +++ include/configs/M5275EVB.h | 14 +++ include/configs/M5282EVB.h | 13 +++ include/configs/M53017EVB.h | 11 ++ include/configs/M5329EVB.h | 11 ++ include/configs/M5373EVB.h | 11 ++ include/configs/M54451EVB.h | 15 +++ include/configs/M54455EVB.h | 17 +++- include/configs/M5475EVB.h | 16 +++ include/configs/M5485EVB.h | 16 +++ include/configs/TASREG.h | 11 ++ include/configs/astro_mcf5373l.h | 11 ++ include/configs/cobra5272.h | 13 +++ include/configs/idmr.h | 13 +++ lib_m68k/cache.c | 123 ++++++++++++++++++++++- 30 files changed, 658 insertions(+), 599 deletions(-) create mode 100644 include/asm-m68k/cache.h (limited to 'cpu') diff --git a/cpu/mcf5227x/start.S b/cpu/mcf5227x/start.S index 0c9c89c4021..30428f15d8e 100644 --- a/cpu/mcf5227x/start.S +++ b/cpu/mcf5227x/start.S @@ -24,16 +24,12 @@ #include #include #include "version.h" +#include #ifndef CONFIG_IDENT_STRING #define CONFIG_IDENT_STRING "" #endif -/* last three long word reserved for cache status */ -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END- 4) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END- 8) -#define CACR_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-12) - #define _START _start #define _FAULT _fault @@ -378,21 +374,19 @@ _start: movec %d0, %RAMBAR1 #endif + /* invalidate and disable cache */ + move.l #CF_CACR_CINV, %d0 /* Invalidate cache cmd */ + movec %d0, %CACR /* Invalidate cache */ + move.l #0, %d0 + movec %d0, %ACR0 + movec %d0, %ACR1 + /* initialize general use internal ram */ move.l #0, %d0 move.l #(ICACHE_STATUS), %a1 /* icache */ move.l #(DCACHE_STATUS), %a2 /* icache */ - move.l #(CACR_STATUS), %a3 /* CACR */ move.l %d0, (%a1) move.l %d0, (%a2) - move.l %d0, (%a3) - - /* invalidate and disable cache */ - move.l #0x01000000, %d0 /* Invalidate cache cmd */ - movec %d0, %CACR /* Invalidate cache */ - move.l #0, %d0 - movec %d0, %ACR0 - movec %d0, %ACR1 /* set stackpointer to end of internal ram to get some stackspace for the first c-code */ @@ -509,84 +503,6 @@ _int_handler: addql #4,%sp RESTORE_ALL -/*------------------------------------------------------------------------------*/ -/* cache functions */ - .globl icache_enable -icache_enable: - move.l #0x01200000, %d0 /* Invalid cache */ - movec %d0, %CACR - - move.l #(CONFIG_SYS_SDRAM_BASE + 0x1c000), %d0 - movec %d0, %ACR0 - - move.l #0x81600610, %d0 /* Enable cache */ - movec %d0, %CACR - - move.l #(ICACHE_STATUS), %a1 - moveq #1, %d0 - move.l %d0, (%a1) - rts - - .globl icache_disable -icache_disable: - move.l #0x01F00000, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Invalidate icache */ - clr.l %d0 - movec %d0, %ACR0 - movec %d0, %ACR1 - - move.l #(ICACHE_STATUS), %a1 - moveq #0, %d0 - move.l %d0, (%a1) - rts - - .globl icache_status -icache_status: - move.l #(ICACHE_STATUS), %a1 - move.l (%a1), %d0 - rts - - .globl icache_invalid -icache_invalid: - move.l #0x80600610, %d0 /* Invalidate icache */ - movec %d0, %CACR /* Enable and invalidate cache */ - rts - - .globl dcache_enable -dcache_enable: - move.l #0x01200000, %d0 /* Invalid cache */ - movec %d0, %CACR - - move.l #0x81300610, %d0 - movec %d0, %CACR - - move.l #(DCACHE_STATUS), %a1 - moveq #1, %d0 - move.l %d0, (%a1) - rts - - .globl dcache_disable -dcache_disable: - move.l #0x81600610, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Invalidate icache */ - - move.l #(DCACHE_STATUS), %a1 - moveq #0, %d0 - move.l %d0, (%a1) - rts - - .globl dcache_invalid -dcache_invalid: - move.l #0x81100610, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable and invalidate cache */ - rts - - .globl dcache_status -dcache_status: - move.l #(DCACHE_STATUS), %a1 - move.l (%a1), %d0 - rts - /*------------------------------------------------------------------------------*/ .globl version_string diff --git a/cpu/mcf523x/start.S b/cpu/mcf523x/start.S index d44da37ec72..20b50e7579e 100644 --- a/cpu/mcf523x/start.S +++ b/cpu/mcf523x/start.S @@ -24,6 +24,7 @@ #include #include #include "version.h" +#include #ifndef CONFIG_IDENT_STRING #define CONFIG_IDENT_STRING "" @@ -135,7 +136,7 @@ _start: movec %d0, %RAMBAR1 /* invalidate and disable cache */ - move.l #0x01000000, %d0 /* Invalidate cache cmd */ + move.l #CF_CACR_CINV, %d0 /* Invalidate cache cmd */ movec %d0, %CACR /* Invalidate cache */ nop move.l #0, %d0 @@ -144,8 +145,8 @@ _start: /* initialize general use internal ram */ move.l #0, %d0 - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1 - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a2 + move.l #(ICACHE_STATUS), %a1 /* icache */ + move.l #(DCACHE_STATUS), %a2 /* icache */ move.l %d0, (%a1) move.l %d0, (%a2) @@ -264,74 +265,6 @@ _int_handler: addql #4,%sp RESTORE_ALL -/*------------------------------------------------------------------------------*/ -/* cache functions */ - .globl icache_enable -icache_enable: - move.l #0x01000000, %d0 /* Invalidate cache cmd */ - movec %d0, %CACR /* Invalidate cache */ - nop - move.l #(CONFIG_SYS_SDRAM_BASE + 0xc000), %d0 /* Setup cache mask */ - movec %d0, %ACR0 /* Enable cache */ - move.l #(CONFIG_SYS_FLASH_BASE + 0xc000), %d0 /* Setup cache mask */ - movec %d0, %ACR1 /* Enable cache */ - - move.l #0x80400100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ - nop - - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1 - moveq #1, %d0 - move.l %d0, (%a1) - rts - - .globl icache_disable -icache_disable: - move.l #0x00000100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Disable cache */ - clr.l %d0 /* Setup cache mask */ - movec %d0, %ACR0 - movec %d0, %ACR1 - - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1 - moveq #0, %d0 - move.l %d0, (%a1) - rts - - .globl icache_status -icache_status: - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1 - move.l (%a1), %d0 - rts - - .globl icache_invalid -icache_invalid: - move.l #0x80600100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ - nop - rts - - .globl dcache_enable -dcache_enable: - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a1 - moveq #1, %d0 - move.l %d0, (%a1) - rts - - /* No dcache, just a dummy function */ - .globl dcache_disable -dcache_disable: - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a1 - moveq #0, %d0 - move.l %d0, (%a1) - rts - - .globl dcache_status -dcache_status: - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a1 - move.l (%a1), %d0 - rts - /*------------------------------------------------------------------------------*/ .globl version_string diff --git a/cpu/mcf52x2/start.S b/cpu/mcf52x2/start.S index 0dd4de5160c..9ef206aa0fd 100644 --- a/cpu/mcf52x2/start.S +++ b/cpu/mcf52x2/start.S @@ -24,12 +24,12 @@ #include #include #include "version.h" +#include #ifndef CONFIG_IDENT_STRING #define CONFIG_IDENT_STRING "" #endif - #define _START _start #define _FAULT _fault @@ -201,6 +201,13 @@ _after_flashbar_copy: movec %d0, %RAMBAR1 #endif + /* initialize general use internal ram */ + move.l #0, %d0 + move.l #(ICACHE_STATUS), %a1 /* icache */ + move.l #(DCACHE_STATUS), %a2 /* icache */ + move.l %d0, (%a1) + move.l %d0, (%a2) + /* set stackpointer to end of internal ram to get some stackspace for the first c-code */ move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp clr.l %sp@- @@ -283,23 +290,6 @@ clear_bss: cmp.l %a2, %a1 bne 7b -#if defined(CONFIG_M5281) || defined(CONFIG_M5282) - /* patch the 3 accesspoints to 3 ichache_state */ - /* quick and dirty */ - - move.l %a0,%d1 - add.l #(icache_state - CONFIG_SYS_MONITOR_BASE),%d1 - move.l %a0,%a1 - add.l #(icache_state_access_1+2 - CONFIG_SYS_MONITOR_BASE),%a1 - move.l %d1,(%a1) - move.l %a0,%a1 - add.l #(icache_state_access_2+2 - CONFIG_SYS_MONITOR_BASE),%a1 - move.l %d1,(%a1) - move.l %a0,%a1 - add.l #(icache_state_access_3+2 - CONFIG_SYS_MONITOR_BASE),%a1 - move.l %d1,(%a1) -#endif - /* calculate relative jump to board_init_r in ram */ move.l %a0, %a1 add.l #(board_init_r - CONFIG_SYS_MONITOR_BASE), %a1 @@ -335,156 +325,6 @@ _int_handler: addql #4,%sp RESTORE_ALL -/*------------------------------------------------------------------------------*/ -/* cache functions */ -#ifdef CONFIG_M5208 - .globl icache_enable -icache_enable: - move.l #0x01000000, %d0 /* Invalidate cache cmd */ - movec %d0, %CACR /* Invalidate cache */ - move.l #(CONFIG_SYS_SDRAM_BASE + 0xC000), %d0 /* Setup cache mask */ - movec %d0, %ACR0 /* Enable cache */ - - move.l #0x80000200, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ - nop - - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1 - moveq #1, %d0 - move.l %d0, (%a1) - rts -#endif - -#ifdef CONFIG_M5271 - .globl icache_enable -icache_enable: - move.l #0x01000000, %d0 /* Invalidate cache cmd */ - movec %d0, %CACR /* Invalidate cache */ - move.l #(CONFIG_SYS_SDRAM_BASE + 0xc000), %d0 /* Setup cache mask */ - movec %d0, %ACR0 /* Enable cache */ - - move.l #0x80000200, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ - nop - - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1 - moveq #1, %d0 - move.l %d0, (%a1) - rts -#endif - -#ifdef CONFIG_M5272 - .globl icache_enable -icache_enable: - move.l #0x01000000, %d0 /* Invalidate cache cmd */ - movec %d0, %CACR /* Invalidate cache */ - move.l #0x0000c000, %d0 /* Setup cache mask */ - movec %d0, %ACR0 /* Enable cache */ - move.l #0xff00c000, %d0 /* Setup cache mask */ - movec %d0, %ACR1 /* Enable cache */ - move.l #0x80000100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ - moveq #1, %d0 - move.l %d0, icache_state - rts -#endif - -#if defined(CONFIG_M5275) -/* - * Instruction cache only - */ - .globl icache_enable -icache_enable: - move.l #0x01400000, %d0 /* Invalidate cache cmd */ - movec %d0, %CACR /* Invalidate cache */ - move.l #0x0000c000, %d0 /* Setup SDRAM caching */ - movec %d0, %ACR0 /* Enable cache */ - move.l #0x00000000, %d0 /* No other caching */ - movec %d0, %ACR1 /* Enable cache */ - move.l #0x80400100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ - moveq #1, %d0 - move.l %d0, icache_state - rts -#endif - -#ifdef CONFIG_M5282 - .globl icache_enable -icache_enable: - move.l #0x01000000, %d0 /* Invalidate cache cmd */ - movec %d0, %CACR /* Invalidate cache */ - move.l #0x0000c000, %d0 /* Setup cache mask */ - movec %d0, %ACR0 /* Enable cache */ - move.l #0xff00c000, %d0 /* Setup cache mask */ - movec %d0, %ACR1 /* Enable cache */ - move.l #0x80400100, %d0 /* Setup cache mask, data cache disabel*/ - movec %d0, %CACR /* Enable cache */ - moveq #1, %d0 -icache_state_access_1: - move.l %d0, icache_state - rts -#endif - -#if defined(CONFIG_M5249) || defined(CONFIG_M5253) - .globl icache_enable -icache_enable: - /* - * Note: The 5249 Documentation doesn't give a bit position for CINV! - * From the 5272 and the 5307 documentation, I have deduced that it is - * probably CACR[24]. Should someone say something to Motorola? - * ~Jeremy - */ - move.l #0x01000000, %d0 /* Invalidate whole cache */ - move.c %d0,%CACR - move.l #0xff00c000, %d0 /* Set FLASH cachable: always match (SM=0b10) */ - move.c %d0, %ACR0 - move.l #0x0000c000, %d0 /* Set SDRAM cachable: always match (SM=0b10) */ - move.c %d0, %ACR1 - move.l #0x90000200, %d0 /* Set cache enable cmd */ - move.c %d0,%CACR - moveq #1, %d0 - move.l %d0, icache_state - rts -#endif - - .globl icache_disable -icache_disable: - move.l #0x00000100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ - clr.l %d0 /* Setup cache mask */ - movec %d0, %ACR0 /* Enable cache */ - movec %d0, %ACR1 /* Enable cache */ - moveq #0, %d0 -icache_state_access_2: - move.l %d0, icache_state - rts - - .globl icache_status -icache_status: -icache_state_access_3: - move.l #(icache_state), %a0 - move.l (%a0), %d0 - rts - - .data -icache_state: - .long 0 /* cache is diabled on inirialization */ - - .globl dcache_enable -dcache_enable: - /* dummy function */ - rts - - .globl dcache_disable -dcache_disable: - /* dummy function */ - rts - - .globl dcache_status -dcache_status: - /* dummy function */ - rts - /*------------------------------------------------------------------------------*/ .globl version_string diff --git a/cpu/mcf532x/start.S b/cpu/mcf532x/start.S index 5abd944eb42..a80b0a99464 100644 --- a/cpu/mcf532x/start.S +++ b/cpu/mcf532x/start.S @@ -27,6 +27,7 @@ #include #include #include "version.h" +#include #ifndef CONFIG_IDENT_STRING #define CONFIG_IDENT_STRING "" @@ -142,7 +143,7 @@ _start: movec %d0, %RAMBAR1 /* invalidate and disable cache */ - move.l #0x01000000, %d0 /* Invalidate cache cmd */ + move.l #CF_CACR_CINVA, %d0 /* Invalidate cache cmd */ movec %d0, %CACR /* Invalidate cache */ move.l #0, %d0 movec %d0, %ACR0 @@ -158,8 +159,8 @@ _start: /* initialize general use internal ram */ move.l #0, %d0 - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1 - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a2 + move.l #(ICACHE_STATUS), %a1 /* icache */ + move.l #(DCACHE_STATUS), %a2 /* icache */ move.l %d0, (%a1) move.l %d0, (%a2) @@ -279,71 +280,6 @@ _int_handler: RESTORE_ALL /*------------------------------------------------------------------------------*/ -/* cache functions */ - .globl icache_enable -icache_enable: - move.l #0x01000000, %d0 /* Invalidate cache cmd */ - movec %d0, %CACR /* Invalidate cache */ - move.l #(CONFIG_SYS_SDRAM_BASE + 0xc000 + ((CONFIG_SYS_SDRAM_SIZE & 0x1fe0 - 1) << 16)), %d0 - movec %d0, %ACR0 /* Enable cache */ - - move.l #0x80000200, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ - nop - - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1 - moveq #1, %d0 - move.l %d0, (%a1) - rts - - .globl icache_disable -icache_disable: - move.l #0x01000000, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Disable cache */ - clr.l %d0 /* Setup cache mask */ - movec %d0, %ACR0 - movec %d0, %ACR1 - - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1 - moveq #0, %d0 - move.l %d0, (%a1) - rts - - .globl icache_status -icache_status: - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1 - move.l (%a1), %d0 - rts - - .globl icache_invalid -icache_invalid: - move.l #0x81000200, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ - rts - - .globl dcache_enable -dcache_enable: - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a1 - moveq #1, %d0 - move.l %d0, (%a1) - rts - - /* No dcache, just a dummy function */ - .globl dcache_disable -dcache_disable: - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a1 - moveq #0, %d0 - move.l %d0, (%a1) - rts - - .globl dcache_status -dcache_status: - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a1 - move.l (%a1), %d0 - rts - -/*------------------------------------------------------------------------------*/ - .globl version_string version_string: .ascii U_BOOT_VERSION diff --git a/cpu/mcf5445x/start.S b/cpu/mcf5445x/start.S index d2d44391513..738e4a71101 100644 --- a/cpu/mcf5445x/start.S +++ b/cpu/mcf5445x/start.S @@ -24,16 +24,12 @@ #include #include #include "version.h" +#include #ifndef CONFIG_IDENT_STRING #define CONFIG_IDENT_STRING "" #endif -/* last three long word reserved for cache status */ -#define CACR_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-12) -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END- 8) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END- 4) - #define _START _start #define _FAULT _fault @@ -160,15 +156,13 @@ asm_dram_init: /* initialize general use internal ram */ move.l #0, %d0 - move.l #(CACR_STATUS), %a1 /* CACR */ - move.l #(ICACHE_STATUS), %a2 /* icache */ - move.l #(DCACHE_STATUS), %a3 /* dcache */ + move.l #(ICACHE_STATUS), %a1 /* icache */ + move.l #(DCACHE_STATUS), %a2 /* dcache */ move.l %d0, (%a1) move.l %d0, (%a2) - move.l %d0, (%a3) /* invalidate and disable cache */ - move.l #0x01004100, %d0 /* Invalidate cache cmd */ + move.l #(CONFIG_SYS_ICACHE_INV + CONFIG_SYS_DCACHE_INV), %d0 movec %d0, %CACR /* Invalidate cache */ move.l #0, %d0 movec %d0, %ACR0 @@ -411,15 +405,13 @@ _start: /* initialize general use internal ram */ move.l #0, %d0 - move.l #(CACR_STATUS), %a1 /* CACR */ - move.l #(ICACHE_STATUS), %a2 /* icache */ - move.l #(DCACHE_STATUS), %a3 /* dcache */ + move.l #(ICACHE_STATUS), %a1 /* icache */ + move.l #(DCACHE_STATUS), %a2 /* dcache */ move.l %d0, (%a1) move.l %d0, (%a2) - move.l %d0, (%a3) /* invalidate and disable cache */ - move.l #0x01004100, %d0 /* Invalidate cache cmd */ + move.l #(CONFIG_SYS_ICACHE_INV + CONFIG_SYS_DCACHE_INV), %d0 movec %d0, %CACR /* Invalidate cache */ move.l #0, %d0 movec %d0, %ACR0 @@ -543,107 +535,6 @@ _int_handler: addql #4,%sp RESTORE_ALL -/*------------------------------------------------------------------------------*/ -/* cache functions */ - .globl icache_enable -icache_enable: - move.l #(CACR_STATUS), %a1 /* read CACR Status */ - move.l (%a1), %d1 - - move.l #0x00040100, %d0 /* Invalidate icache */ - movec %d0, %CACR - - move.l #(CONFIG_SYS_SDRAM_BASE + 0xC000), %d0 /* Setup icache */ - movec %d0, %ACR2 - - move.l #0x04088020, %d0 /* Enable bcache and icache */ - movec %d0, %CACR - - move.l #(ICACHE_STATUS), %a1 - moveq #1, %d0 - move.l %d0, (%a1) - rts - - .globl icache_disable -icache_disable: - move.l #(CACR_STATUS), %a1 /* read CACR Status */ - move.l (%a1), %d0 - - move.l #0xFFF77BFF, %d0 - or.l #0x00040100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Invalidate icache */ - clr.l %d0 - movec %d0, %ACR2 - movec %d0, %ACR3 - - move.l #(ICACHE_STATUS), %a1 - moveq #0, %d0 - move.l %d0, (%a1) - rts - - .globl icache_status -icache_status: - move.l #(ICACHE_STATUS), %a1 - move.l (%a1), %d0 - rts - - .globl icache_invalid -icache_invalid: - move.l #(CACR_STATUS), %a1 /* read CACR Status */ - move.l (%a1), %d0 - - move.l #0x00040100, %d0 /* Invalidate icache */ - movec %d0, %CACR /* Enable and invalidate cache */ - rts - - .globl dcache_enable -dcache_enable: - move.l #(CACR_STATUS), %a1 /* read CACR Status */ - move.l (%a1), %d1 - - move.l #0x01040100, %d0 - movec %d0, %CACR /* Invalidate dcache */ - - move.l #0x80088020, %d0 /* Enable bcache and icache */ - movec %d0, %CACR - - move.l #(DCACHE_STATUS), %a1 - moveq #1, %d0 - move.l %d0, (%a1) - rts - - .globl dcache_disable -dcache_disable: - move.l #(CACR_STATUS), %a1 /* read CACR Status */ - move.l (%a1), %d0 - - and.l #0x7FFFFFFF, %d0 - or.l #0x01000000, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Disable dcache */ - clr.l %d0 - movec %d0, %ACR0 - movec %d0, %ACR1 - - move.l #(DCACHE_STATUS), %a1 - moveq #0, %d0 - move.l %d0, (%a1) - rts - - .globl dcache_invalid -dcache_invalid: - move.l #(CACR_STATUS), %a1 /* read CACR Status */ - move.l (%a1), %d0 - - move.l #0x81088020, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable and invalidate cache */ - rts - - .globl dcache_status -dcache_status: - move.l #(DCACHE_STATUS), %a1 - move.l (%a1), %d0 - rts - /*------------------------------------------------------------------------------*/ .globl version_string diff --git a/cpu/mcf547x_8x/start.S b/cpu/mcf547x_8x/start.S index 94ef14bf3d2..84118629e27 100644 --- a/cpu/mcf547x_8x/start.S +++ b/cpu/mcf547x_8x/start.S @@ -24,16 +24,12 @@ #include #include #include "version.h" +#include #ifndef CONFIG_IDENT_STRING #define CONFIG_IDENT_STRING "" #endif -/* last three long word reserved for cache status */ -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END- 4) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END- 8) -#define CACR_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-12) - #define _START _start #define _FAULT _fault @@ -158,10 +154,8 @@ _start: move.l #0, %d0 move.l #(ICACHE_STATUS), %a1 /* icache */ move.l #(DCACHE_STATUS), %a2 /* icache */ - move.l #(CACR_STATUS), %a3 /* CACR */ move.l %d0, (%a1) move.l %d0, (%a2) - move.l %d0, (%a3) /* set stackpointer to end of internal ram to get some stackspace for the first c-code */ @@ -278,81 +272,6 @@ _int_handler: addql #4,%sp RESTORE_ALL -/*------------------------------------------------------------------------------*/ -/* cache functions */ - .globl icache_enable -icache_enable: - move.l #(CONFIG_SYS_SDRAM_BASE + 0x1c000), %d0 - movec %d0, %ACR2 /* Enable cache */ - - move.l #0x020C8100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ - nop - - move.l #(ICACHE_STATUS), %a1 - moveq #1, %d0 - move.l %d0, (%a1) - rts - - .globl icache_disable -icache_disable: - move.l #0x000C8100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Disable cache */ - clr.l %d0 /* Setup cache mask */ - movec %d0, %ACR2 - movec %d0, %ACR3 - - move.l #(ICACHE_STATUS), %a1 - moveq #0, %d0 - move.l %d0, (%a1) - rts - - .globl icache_invalid -icache_invalid: - move.l #0x000C8100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ - rts - - .globl icache_status -icache_status: - move.l #(ICACHE_STATUS), %a1 - move.l (%a1), %d0 - rts - - .globl dcache_enable -dcache_enable: - bsr icache_disable - - move.l #(CONFIG_SYS_SDRAM_BASE + 0xc000), %d0 - movec %d0, %ACR0 /* Enable cache */ - - move.l #0xA30C8100, %d0 /* Invalidate cache cmd */ - movec %d0, %CACR /* Invalidate cache */ - - move.l #(DCACHE_STATUS), %a1 - moveq #1, %d0 - move.l %d0, (%a1) - rts - - .globl dcache_disable -dcache_disable: - move.l #0xA30C8100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Disable cache */ - clr.l %d0 /* Setup cache mask */ - movec %d0, %ACR0 - movec %d0, %ACR1 - - move.l #(DCACHE_STATUS), %a1 - moveq #0, %d0 - move.l %d0, (%a1) - rts - - .globl dcache_status -dcache_status: - move.l #(DCACHE_STATUS), %a1 - move.l (%a1), %d0 - rts - /*------------------------------------------------------------------------------*/ .globl version_string diff --git a/include/asm-m68k/cache.h b/include/asm-m68k/cache.h new file mode 100644 index 00000000000..7c84e484711 --- /dev/null +++ b/include/asm-m68k/cache.h @@ -0,0 +1,210 @@ +/* + * ColdFire cache + * + * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CACHE_H +#define __CACHE_H + +#if defined(CONFIG_MCF520x) || defined(CONFIG_MCF523x) || \ + defined(CONFIG_MCF52x2) || defined(CONFIG_MCF5227x) +#define CONFIG_CF_V2 +#endif + +#if defined(CONFIG_MCF532x) || defined(CONFIG_MCF5301x) +#define CONFIG_CF_V3 +#endif + +#if defined(CONFIG_MCF547x_8x) || defined(CONFIG_MCF5445x) +#define CONFIG_CF_V4 +#if defined(CONFIG_MCF5441x) +#define CONFIG_CF_V4E /* Four Extra ACRn */ +#endif +#endif + +/* ***** CACR ***** */ +/* V2 Core */ +#ifdef CONFIG_CF_V2 + +#define CF_CACR_CENB (1 << 31) +#define CF_CACR_CPD (1 << 28) +#define CF_CACR_CFRZ (1 << 27) +#define CF_CACR_CEIB (1 << 10) +#define CF_CACR_DCM (1 << 9) +#define CF_CACR_DBWE (1 << 8) + +#if defined(CONFIG_MCF5249) || defined(CONFIG_MCF5253) +#define CF_CACR_DWP (1 << 6) +#else +#define CF_CACR_CINV (1 << 24) +#define CF_CACR_DISI (1 << 23) +#define CF_CACR_DISD (1 << 22) +#define CF_CACR_INVI (1 << 21) +#define CF_CACR_INVD (1 << 20) +#define CF_CACR_DWP (1 << 5) +#define CF_CACR_EUSP (1 << 4) +#endif /* CONFIG_MCF5249 || CONFIG_MCF5253 */ + +#endif /* CONFIG_CF_V2 */ + +/* V3 Core */ +#ifdef CONFIG_CF_V3 + +#define CF_CACR_EC (1 << 31) +#define CF_CACR_ESB (1 << 29) +#define CF_CACR_DPI (1 << 28) +#define CF_CACR_HLCK (1 << 27) +#define CF_CACR_CINVA (1 << 24) +#define CF_CACR_DNFB (1 << 10) +#define CF_CACR_DCM_UNMASK 0xFFFFFCFF +#define CF_CACR_DCM_WT (0 << 8) +#define CF_CACR_DCM_CB (1 << 8) +#define CF_CACR_DCM_P (2 << 8) +#define CF_CACR_DCM_IP (3 << 8) +#define CF_CACR_DW (1 << 5) +#define CF_CACR_EUSP (1 << 4) + +#endif /* CONFIG_CF_V3 */ + +/* V4 Core */ +#ifdef CONFIG_CF_V4 + +#define CF_CACR_DEC (1 << 31) +#define CF_CACR_DW (1 << 30) +#define CF_CACR_DESB (1 << 29) +#define CF_CACR_DDPI (1 << 28) +#define CF_CACR_DHLCK (1 << 27) +#define CF_CACR_DDCM_UNMASK (0xF9FFFFFF) +#define CF_CACR_DDCM_WT (0 << 25) +#define CF_CACR_DDCM_CB (1 << 25) +#define CF_CACR_DDCM_P (2 << 25) +#define CF_CACR_DDCM_IP (3 << 25) +#define CF_CACR_DCINVA (1 << 24) + +#define CF_CACR_DDSP (1 << 23) +#define CF_CACR_BEC (1 << 19) +#define CF_CACR_BCINVA (1 << 18) +#define CF_CACR_IEC (1 << 15) +#define CF_CACR_DNFB (1 << 13) +#define CF_CACR_IDPI (1 << 12) +#define CF_CACR_IHLCK (1 << 11) +#define CF_CACR_IDCM (1 << 10) +#define CF_CACR_ICINVA (1 << 8) +#define CF_CACR_IDSP (1 << 7) +#define CF_CACR_EUSP (1 << 5) + +#ifdef CONFIG_MCF5445x +#define CF_CACR_IVO (1 << 20) +#define CF_CACR_SPA (1 << 14) +#else +#define CF_CACR_DF (1 << 4) +#endif + +#endif /* CONFIG_CF_V4 */ + +/* ***** ACR ***** */ +#define CF_ACR_ADR_UNMASK (0x00FFFFFF) +#define CF_ACR_ADR(x) ((x & 0xFF) << 24) +#define CF_ACR_ADRMSK_UNMASK (0xFF00FFFF) +#define CF_ACR_ADRMSK(x) ((x & 0xFF) << 16) +#define CF_ACR_EN (1 << 15) +#define CF_ACR_SM_UNMASK (0xFFFF9FFF) +#define CF_ACR_SM_UM (0 << 13) +#define CF_ACR_SM_SM (1 << 13) +#define CF_ACR_SM_ALL (3 << 13) +#define CF_ACR_WP (1 << 2) + +/* V2 Core */ +#ifdef CONFIG_CF_V2 +#define CF_ACR_CM (1 << 6) +#define CF_ACR_BWE (1 << 5) +#else +/* V3 & V4 */ +#define CF_ACR_CM_UNMASK (0xFFFFFF9F) +#define CF_ACR_CM_WT (0 << 5) +#define CF_ACR_CM_CB (1 << 5) +#define CF_ACR_CM_P (2 << 5) +#define CF_ACR_CM_IP (3 << 5) +#endif /* CONFIG_CF_V2 */ + +/* V4 Core */ +#ifdef CONFIG_CF_V4 +#define CF_ACR_AMM (1 << 10) +#define CF_ACR_SP (1 << 3) +#endif /* CONFIG_CF_V4 */ + + +#ifndef CONFIG_SYS_CACHE_ICACR +#define CONFIG_SYS_CACHE_ICACR 0 +#endif + +#ifndef CONFIG_SYS_CACHE_DCACR +#ifdef CONFIG_SYS_CACHE_ICACR +#define CONFIG_SYS_CACHE_DCACR CONFIG_SYS_CACHE_ICACR +#else +#define CONFIG_SYS_CACHE_DCACR 0 +#endif +#endif + +#ifndef CONFIG_SYS_CACHE_ACR0 +#define CONFIG_SYS_CACHE_ACR0 0 +#endif + +#ifndef CONFIG_SYS_CACHE_ACR1 +#define CONFIG_SYS_CACHE_ACR1 0 +#endif + +#ifndef CONFIG_SYS_CACHE_ACR2 +#define CONFIG_SYS_CACHE_ACR2 0 +#endif + +#ifndef CONFIG_SYS_CACHE_ACR3 +#define CONFIG_SYS_CACHE_ACR3 0 +#endif + +#ifndef CONFIG_SYS_CACHE_ACR4 +#define CONFIG_SYS_CACHE_ACR4 0 +#endif + +#ifndef CONFIG_SYS_CACHE_ACR5 +#define CONFIG_SYS_CACHE_ACR5 0 +#endif + +#ifndef CONFIG_SYS_CACHE_ACR6 +#define CONFIG_SYS_CACHE_ACR6 0 +#endif + +#ifndef CONFIG_SYS_CACHE_ACR7 +#define CONFIG_SYS_CACHE_ACR7 0 +#endif + +#define CF_ADDRMASK(x) (((x > 0x10) ? ((x >> 4) - 1) : (x)) << 16) + +#ifndef __ASSEMBLY__ /* put C only stuff in this section */ + +void icache_invalid(void); +void dcache_invalid(void); + +#endif + +#endif /* __CACHE_H */ diff --git a/include/configs/EB+MCF-EV123.h b/include/configs/EB+MCF-EV123.h index a0b27a89c42..880cb4ee6b9 100644 --- a/include/configs/EB+MCF-EV123.h +++ b/include/configs/EB+MCF-EV123.h @@ -208,6 +208,18 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV + CF_CACR_DCM) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_DISD | \ + CF_CACR_CEIB | CF_CACR_DBWE | \ + CF_CACR_EUSP) + /*----------------------------------------------------------------------- * Memory bank definitions */ diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h index 3cc259ffd1c..e6632acbe79 100644 --- a/include/configs/M5208EVBE.h +++ b/include/configs/M5208EVBE.h @@ -207,6 +207,19 @@ /* Cache Configuration */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ + CF_CACR_DISD | CF_CACR_INVI | \ + CF_CACR_CEIB | CF_CACR_DCM | \ + CF_CACR_EUSP) + /* Chipselect bank definitions */ /* * CS0 - NOR Flash diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h index 1801d9d7d58..6c6b5d6d571 100644 --- a/include/configs/M52277EVB.h +++ b/include/configs/M52277EVB.h @@ -302,6 +302,19 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ + CF_CACR_DISD | CF_CACR_INVI | \ + CF_CACR_CEIB | CF_CACR_DCM | \ + CF_CACR_EUSP) + /*----------------------------------------------------------------------- * Memory bank definitions */ diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h index 2b816ceae2b..5c0dc842aad 100644 --- a/include/configs/M5235EVB.h +++ b/include/configs/M5235EVB.h @@ -237,6 +237,18 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_DISD | \ + CF_CACR_CEIB | CF_CACR_DCM | \ + CF_CACR_EUSP) + /*----------------------------------------------------------------------- * Chipselect bank definitions */ diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h index e3830e53693..33ac2859dfb 100644 --- a/include/configs/M5249EVB.h +++ b/include/configs/M5249EVB.h @@ -60,6 +60,7 @@ * Command line configuration. */ #include +#define CONFIG_CMD_CACHE #undef CONFIG_CMD_NET #define CONFIG_SYS_PROMPT "=> " @@ -165,6 +166,20 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_DCM) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_FLASH_BASE | \ + CF_ADDRMASK(2) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ACR1 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CEIB | \ + CF_CACR_DBWE) + /*----------------------------------------------------------------------- * Memory bank definitions */ diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index f813f8891b5..9944e12fe4e 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -57,6 +57,7 @@ */ #include +#define CONFIG_CMD_CACHE #define CONFIG_CMD_LOADB #define CONFIG_CMD_LOADS #define CONFIG_CMD_EXT2 @@ -226,6 +227,20 @@ /* Cache Configuration */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_DCM) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_FLASH_BASE | \ + CF_ADDRMASK(8) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ACR1 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CEIB | \ + CF_CACR_DBWE) + /* Port configuration */ #define CONFIG_SYS_FECI2C 0xF0 diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h index df6970cdfac..206d1152ee4 100644 --- a/include/configs/M5253EVBE.h +++ b/include/configs/M5253EVBE.h @@ -64,6 +64,7 @@ * Command line configuration. */ #include +#define CONFIG_CMD_CACHE #undef CONFIG_CMD_NET #define CONFIG_CMD_LOADB #define CONFIG_CMD_LOADS @@ -179,6 +180,20 @@ /* Cache Configuration */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_DCM) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_FLASH_BASE | \ + CF_ADDRMASK(2) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ACR1 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CEIB | \ + CF_CACR_DBWE) + /* Port configuration */ #define CONFIG_SYS_FECI2C 0xF0 diff --git a/include/configs/M5271EVB.h b/include/configs/M5271EVB.h index 50b3ab28084..798949cc560 100644 --- a/include/configs/M5271EVB.h +++ b/include/configs/M5271EVB.h @@ -72,6 +72,7 @@ */ #include +#define CONFIG_CMD_CACHE #define CONFIG_CMD_PING #define CONFIG_CMD_NET #define CONFIG_CMD_MII @@ -229,6 +230,19 @@ /* Cache Configuration */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ + CF_CACR_DISD | CF_CACR_INVI | \ + CF_CACR_CEIB | CF_CACR_DCM | \ + CF_CACR_EUSP) + /* Chip Select 0 : Boot Flash */ #define CONFIG_SYS_CS0_BASE 0xFFE00000 #define CONFIG_SYS_CS0_MASK 0x001F0001 diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index f824158a697..f704bb3ff7c 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -74,6 +74,7 @@ */ #include +#define CONFIG_CMD_CACHE #define CONFIG_CMD_MII #define CONFIG_CMD_NET #define CONFIG_CMD_PING @@ -211,6 +212,19 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ + CF_CACR_DISD | CF_CACR_INVI | \ + CF_CACR_CEIB | CF_CACR_DCM | \ + CF_CACR_EUSP) + /*----------------------------------------------------------------------- * Memory bank definitions */ diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h index f8d43f0a5bb..981670ac069 100644 --- a/include/configs/M5275EVB.h +++ b/include/configs/M5275EVB.h @@ -72,6 +72,7 @@ /* Available command configuration */ #include +#define CONFIG_CMD_CACHE #define CONFIG_CMD_PING #define CONFIG_CMD_MII #define CONFIG_CMD_NET @@ -220,6 +221,19 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ + CF_CACR_DISD | CF_CACR_INVI | \ + CF_CACR_CEIB | CF_CACR_DCM | \ + CF_CACR_EUSP) + /*----------------------------------------------------------------------- * Memory bank definitions */ diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index 15590cfcd5d..6e0aa14d3a0 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -64,6 +64,7 @@ * Command line configuration. */ #include +#define CONFIG_CMD_CACHE #define CONFIG_CMD_NET #define CONFIG_CMD_PING #define CONFIG_CMD_MII @@ -209,6 +210,18 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV + CF_CACR_DCM) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_DISD | \ + CF_CACR_CEIB | CF_CACR_DBWE | \ + CF_CACR_EUSP) + /*----------------------------------------------------------------------- * Memory bank definitions */ diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h index c351d415cf3..d983a8fedb7 100644 --- a/include/configs/M53017EVB.h +++ b/include/configs/M53017EVB.h @@ -233,6 +233,17 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINVA) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_EC | CF_CACR_CINVA | \ + CF_CACR_DCM_P) + /*----------------------------------------------------------------------- * Chipselect bank definitions */ diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index 8180c05e67f..159b178f401 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -237,6 +237,17 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINVA) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_EC | CF_CACR_CINVA | \ + CF_CACR_DCM_P) + /*----------------------------------------------------------------------- * Chipselect bank definitions */ diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h index 8652a80aa11..af1988ce0a4 100644 --- a/include/configs/M5373EVB.h +++ b/include/configs/M5373EVB.h @@ -237,6 +237,17 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINVA) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_EC | CF_CACR_CINVA | \ + CF_CACR_DCM_P) + /*----------------------------------------------------------------------- * Chipselect bank definitions */ diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h index a5acfd28460..a80d33047f8 100644 --- a/include/configs/M54451EVB.h +++ b/include/configs/M54451EVB.h @@ -309,6 +309,21 @@ /* Cache Configuration */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA) +#define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA) +#define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_IEC | \ + CF_CACR_ICINVA | CF_CACR_EUSP) +#define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \ + CF_CACR_DEC | CF_CACR_DDCM_P | \ + CF_CACR_DCINVA) & ~CF_CACR_ICINVA) + /*----------------------------------------------------------------------- * Memory bank definitions */ diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index 7737284aab6..5b4bba8c26c 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -279,7 +279,7 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 -#define CONFIG_SYS_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */ +#define CONFIG_SYS_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */ #define CONFIG_SYS_INIT_RAM_CTRL 0x221 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ #define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 32) @@ -408,6 +408,21 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA) +#define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA) +#define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_IEC | \ + CF_CACR_ICINVA | CF_CACR_EUSP) +#define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \ + CF_CACR_DEC | CF_CACR_DDCM_P | \ + CF_CACR_DCINVA) & ~CF_CACR_ICINVA) + /*----------------------------------------------------------------------- * Memory bank definitions */ diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h index 4534002e473..d0077667f3a 100644 --- a/include/configs/M5475EVB.h +++ b/include/configs/M5475EVB.h @@ -286,6 +286,22 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA + \ + CF_CACR_IDCM) +#define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA) +#define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_BCINVA | \ + CF_CACR_IEC | CF_CACR_ICINVA) +#define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \ + CF_CACR_DEC | CF_CACR_DDCM_P | \ + CF_CACR_DCINVA) & ~CF_CACR_ICINVA) + /*----------------------------------------------------------------------- * Chipselect bank definitions */ diff --git a/include/configs/M5485EVB.h b/include/configs/M5485EVB.h index 971cb67bad1..f23b8b0efae 100644 --- a/include/configs/M5485EVB.h +++ b/include/configs/M5485EVB.h @@ -272,6 +272,22 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA + \ + CF_CACR_IDCM) +#define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA) +#define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_BCINVA | \ + CF_CACR_IEC | CF_CACR_ICINVA) +#define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \ + CF_CACR_DEC | CF_CACR_DDCM_P | \ + CF_CACR_DCINVA) & ~CF_CACR_ICINVA) + /*----------------------------------------------------------------------- * Chipselect bank definitions */ diff --git a/include/configs/TASREG.h b/include/configs/TASREG.h index 25f3a26f35f..b69f015c7cd 100644 --- a/include/configs/TASREG.h +++ b/include/configs/TASREG.h @@ -252,6 +252,17 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_DCM) +#define CONFIG_SYS_CACHE_ACR1 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CEIB | \ + CF_CACR_DBWE) + /*----------------------------------------------------------------------- * Memory bank definitions */ diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h index 1fe42f682a7..7c8281cae75 100644 --- a/include/configs/astro_mcf5373l.h +++ b/include/configs/astro_mcf5373l.h @@ -386,4 +386,15 @@ /* Cache Configuration */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINVA) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_EC | CF_CACR_CINVA | \ + CF_CACR_DCM_P) + #endif /* _CONFIG_ASTRO_MCF5373L_H */ diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index 1c3ea23c777..330e3ac6676 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -331,6 +331,19 @@ from which user programs will be started */ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ + CF_CACR_DISD | CF_CACR_INVI | \ + CF_CACR_CEIB | CF_CACR_DCM | \ + CF_CACR_EUSP) + /*----------------------------------------------------------------------- * Memory bank definitions * diff --git a/include/configs/idmr.h b/include/configs/idmr.h index 841affb7cce..61e3bad4f38 100644 --- a/include/configs/idmr.h +++ b/include/configs/idmr.h @@ -224,6 +224,19 @@ /* Cache Configuration */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ + CF_CACR_DISD | CF_CACR_INVI | \ + CF_CACR_CEIB | CF_CACR_DCM | \ + CF_CACR_EUSP) + /* Port configuration */ #define CONFIG_SYS_FECI2C 0xF0 diff --git a/lib_m68k/cache.c b/lib_m68k/cache.c index 84fb6c2fbca..ed881783f10 100644 --- a/lib_m68k/cache.c +++ b/lib_m68k/cache.c @@ -22,8 +22,129 @@ */ #include +#include +#include -void flush_cache (ulong start_addr, ulong size) +volatile int *cf_icache_status = (int *)ICACHE_STATUS; +volatile int *cf_dcache_status = (int *)DCACHE_STATUS; + +void flush_cache(ulong start_addr, ulong size) { /* Must be implemented for all M68k processors with copy-back data cache */ } + +int icache_status(void) +{ + return *cf_icache_status; +} + +int dcache_status(void) +{ + return *cf_dcache_status; +} + +void icache_enable(void) +{ + icache_invalid(); + + *cf_icache_status = 1; + +#ifdef CONFIG_CF_V4 + __asm__ __volatile__("movec %0, %%acr2"::"r"(CONFIG_SYS_CACHE_ACR2)); + __asm__ __volatile__("movec %0, %%acr3"::"r"(CONFIG_SYS_CACHE_ACR3)); +#elif defined(CONFIG_CF_V4e) + __asm__ __volatile__("movec %0, %%acr6"::"r"(CONFIG_SYS_CACHE_ACR6)); + __asm__ __volatile__("movec %0, %%acr7"::"r"(CONFIG_SYS_CACHE_ACR7)); +#else + __asm__ __volatile__("movec %0, %%acr0"::"r"(CONFIG_SYS_CACHE_ACR0)); + __asm__ __volatile__("movec %0, %%acr1"::"r"(CONFIG_SYS_CACHE_ACR1)); +#endif + + __asm__ __volatile__("movec %0, %%cacr"::"r"(CONFIG_SYS_CACHE_ICACR)); +} + +void icache_disable(void) +{ + u32 temp = 0; + + *cf_icache_status = 0; + icache_invalid(); + +#ifdef CONFIG_CF_V4 + __asm__ __volatile__("movec %0, %%acr2"::"r"(temp)); + __asm__ __volatile__("movec %0, %%acr3"::"r"(temp)); +#elif defined(CONFIG_CF_V4e) + __asm__ __volatile__("movec %0, %%acr6"::"r"(temp)); + __asm__ __volatile__("movec %0, %%acr7"::"r"(temp)); +#else + __asm__ __volatile__("movec %0, %%acr0"::"r"(temp)); + __asm__ __volatile__("movec %0, %%acr1"::"r"(temp)); + +#endif +} + +void icache_invalid(void) +{ + u32 temp; + + temp = CONFIG_SYS_ICACHE_INV; + if (*cf_icache_status) + temp |= CONFIG_SYS_CACHE_ICACR; + + __asm__ __volatile__("movec %0, %%cacr"::"r"(temp)); +} + +/* + * data cache only for ColdFire V4 such as MCF547x_8x, MCF5445x + * the dcache will be dummy in ColdFire V2 and V3 + */ +void dcache_enable(void) +{ + dcache_invalid(); + *cf_dcache_status = 1; + +#ifdef CONFIG_CF_V4 + __asm__ __volatile__("movec %0, %%acr0"::"r"(CONFIG_SYS_CACHE_ACR0)); + __asm__ __volatile__("movec %0, %%acr1"::"r"(CONFIG_SYS_CACHE_ACR1)); +#elif defined(CONFIG_CF_V4e) + __asm__ __volatile__("movec %0, %%acr4"::"r"(CONFIG_SYS_CACHE_ACR4)); + __asm__ __volatile__("movec %0, %%acr5"::"r"(CONFIG_SYS_CACHE_ACR5)); + +#endif + + __asm__ __volatile__("movec %0, %%cacr"::"r"(CONFIG_SYS_CACHE_DCACR)); +} + +void dcache_disable(void) +{ + u32 temp = 0; + + *cf_dcache_status = 0; + dcache_invalid(); + + __asm__ __volatile__("movec %0, %%cacr"::"r"(temp)); + +#ifdef CONFIG_CF_V4 + __asm__ __volatile__("movec %0, %%acr0"::"r"(temp)); + __asm__ __volatile__("movec %0, %%acr1"::"r"(temp)); +#elif defined(CONFIG_CF_V4e) + __asm__ __volatile__("movec %0, %%acr4"::"r"(temp)); + __asm__ __volatile__("movec %0, %%acr5"::"r"(temp)); + +#endif +} + +void dcache_invalid(void) +{ +#ifdef CONFIG_CF_V4 + u32 temp; + + temp = CONFIG_SYS_DCACHE_INV; + if (*cf_dcache_status) + temp |= CONFIG_SYS_CACHE_DCACR; + if (*cf_icache_status) + temp |= CONFIG_SYS_CACHE_ICACR; + + __asm__ __volatile__("movec %0, %%cacr"::"r"(temp)); +#endif +} -- cgit v1.3.1