From 7ef84369708993aeb523ae6a6abd5e5aab66196b Mon Sep 17 00:00:00 2001 From: Sughosh Ganu Date: Fri, 22 Mar 2024 16:27:31 +0530 Subject: doc: fwu: make changes to reflect support for FWU metadata v2 The FWU Update Agent in U-Boot supports both versions of the FWU metadata. Make changes in the documentation to reflect this. Signed-off-by: Sughosh Ganu Tested-by: Michal Simek --- doc/board/socionext/developerbox.rst | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'doc/board') diff --git a/doc/board/socionext/developerbox.rst b/doc/board/socionext/developerbox.rst index 46712c379b6..863761c6e27 100644 --- a/doc/board/socionext/developerbox.rst +++ b/doc/board/socionext/developerbox.rst @@ -116,6 +116,7 @@ configs/synquacer_developerbox_defconfig enables default FWU configuration :: CONFIG_FWU_NUM_BANKS=2 CONFIG_FWU_NUM_IMAGES_PER_BANK=1 CONFIG_CMD_FWU_METADATA=y + CONFIG_FWU_MDATA_V2=y And build it:: @@ -129,7 +130,9 @@ And build it:: By default, the CONFIG_FWU_NUM_BANKS and CONFIG_FWU_NUM_IMAGES_PER_BANKS are set to 2 and 1 respectively. This uses FIP (Firmware Image Package) type image which contains TF-A, U-Boot and OP-TEE (the OP-TEE is optional). -You can use fiptool to compose the FIP image from those firmware images. +You can use fiptool to compose the FIP image from those firmware +images. There are two versions of the FWU metadata, of which the +platform enables version 2 by default. Rebuild SCP firmware -------------------- @@ -194,7 +197,7 @@ following UUIDs. These UUIDs are used for making a FWU metadata image. -u-boot$ ./tools/mkfwumdata -i 1 -b 2 \ +u-boot$ ./tools/mkfwumdata -v 2 -i 1 -b 2 \ 17e86d77-41f9-4fd7-87ec-a55df9842de5,10c36d7d-ca52-b843-b7b9-f9d6c501d108,5a66a702-99fd-4fef-a392-c26e261a2828,a8f868a1-6e5c-4757-878d-ce63375ef2c0 \ ../devbox-fwu-mdata.img -- cgit v1.3.1