From cbb607d2d9be44a5ded7a652e8e7646925adc1e0 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Sun, 30 Jul 2023 11:17:00 -0600 Subject: bootstd: Allow display of the x86 setup information Provide an option to dump this information if available. Move the funciion prototype to the common x86 header. Allow the command line to be left out since 'bootflow info' show this itself and it is not in the correct place in memory until the kernel is actually booted. Fix a badly aligned heading while we are here. Signed-off-by: Simon Glass --- doc/usage/cmd/bootflow.rst | 59 +++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 58 insertions(+), 1 deletion(-) (limited to 'doc/usage/cmd/bootflow.rst') diff --git a/doc/usage/cmd/bootflow.rst b/doc/usage/cmd/bootflow.rst index a8af1f8f603..d53f8373eff 100644 --- a/doc/usage/cmd/bootflow.rst +++ b/doc/usage/cmd/bootflow.rst @@ -11,7 +11,7 @@ Synopis bootflow scan [-abelGH] [bootdev] bootflow list [-e] bootflow select [] - bootflow info [-d] + bootflow info [-ds] bootflow boot bootflow cmdline [set|get|clear|delete|auto] [] @@ -191,6 +191,8 @@ Error Use the `-d` flag to dump out the contents of the bootfile file. +The `-s` flag shows any x86 setup block, instead of the above. + bootflow boot ~~~~~~~~~~~~~ @@ -522,6 +524,61 @@ the cmdline is word-wrapped here and some parts of the command line are elided:: [ 0.000000] Command line: loglevel=7 ... usb-storage.quirks=13fe:6500:u earlycon=uart8250,mmio32,0xfe03e000,115200n8 [ 0.000000] x86/split lock detection: warning about user-space split_locks +This shows looking at x86 setup information:: + + => bootfl sel 0 + => bootfl i -s + Setup located at 77b56010: + + ACPI RSDP addr : 0 + E820: 2 entries + Addr Size Type + 0 1000 RAM + fffff000 1000 Reserved + Setup sectors : 1e + Root flags : 1 + Sys size : 63420 + RAM size : 0 + Video mode : ffff + Root dev : 0 + Boot flag : 0 + Jump : 66eb + Header : 53726448 + Kernel V2 + Version : 20d + Real mode switch : 0 + Start sys seg : 1000 + Kernel version : 38cc + @00003acc: + Type of loader : ff + unknown + Load flags : 1 + : loaded-high + Setup move size : 8000 + Code32 start : 100000 + Ramdisk image : 0 + Ramdisk size : 0 + Bootsect kludge : 0 + Heap end ptr : 5160 + Ext loader ver : 0 + Ext loader type : 0 + Command line ptr : 735000 + Initrd addr max : 7fffffff + Kernel alignment : 200000 + Relocatable kernel : 1 + Min alignment : 15 + : 200000 + Xload flags : 3 + : 64-bit-entry can-load-above-4gb + Cmdline size : 7ff + Hardware subarch : 0 + HW subarch data : 0 + Payload offset : 26e + Payload length : 612045 + Setup data : 0 + Pref address : 1000000 + Init size : 1383000 + Handover offset : 0 Return value -- cgit v1.2.3 From c279224ea6686a992b258b01e07fcadb7f0c7ecb Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Thu, 10 Aug 2023 19:33:18 -0600 Subject: bootstd: Add a command to read all files for a bootflow Some bootflows (such as EFI and ChromiumOS) delay reading the kernel until it is needed to boot. This saves time when scanning and avoids needing to allocate memory for something that may never be used. To permit reading of these files, add a new 'bootflow read' command. Signed-off-by: Simon Glass --- doc/usage/cmd/bootflow.rst | 80 +++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 79 insertions(+), 1 deletion(-) (limited to 'doc/usage/cmd/bootflow.rst') diff --git a/doc/usage/cmd/bootflow.rst b/doc/usage/cmd/bootflow.rst index d53f8373eff..ead493d0aaf 100644 --- a/doc/usage/cmd/bootflow.rst +++ b/doc/usage/cmd/bootflow.rst @@ -12,6 +12,7 @@ Synopis bootflow list [-e] bootflow select [] bootflow info [-ds] + bootflow read bootflow boot bootflow cmdline [set|get|clear|delete|auto] [] @@ -194,10 +195,26 @@ Use the `-d` flag to dump out the contents of the bootfile file. The `-s` flag shows any x86 setup block, instead of the above. +bootflow read +~~~~~~~~~~~~~ + +This reads any files related to the bootflow. Some bootflows with large files +avoid doing this when the bootflow is scanned, since it uses a lot of memory +and takes extra time. The files are then automatically read when `bootflow boot` +is used. + +This command reads these files immediately. Typically this fills in the bootflow +`buf` property, which can be used to examine the bootflow. + +Note that reading the files does not result in any extra parsing, nor loading of +images in the files. This is purely used to read in the data ready for +booting, or examination. + + bootflow boot ~~~~~~~~~~~~~ -This boots the current bootflow. +This boots the current bootflow, reading any required files first. bootflow cmdline @@ -580,6 +597,67 @@ This shows looking at x86 setup information:: Init size : 1383000 Handover offset : 0 +This shows reading a bootflow to examine the kernel:: + + => bootfl i 0 + Name: + Device: emmc@1c,0.bootdev + Block dev: emmc@1c,0.blk + Method: cros + State: ready + Partition: 2 + Subdir: (none) + Filename: + Buffer: 0 + Size: 63ee00 (6548992 bytes) + OS: ChromeOS + Cmdline: console= loglevel=7 init=/sbin/init cros_secure oops=panic panic=-1 root=PARTUUID=35c775e7-3735-d745-93e5-d9e0238f7ed0/PARTNROFF=1 rootwait rw dm_verity.error_behavior=3 dm_verity.max_bios=-1 dm_verity.dev_wait=0 dm="1 vroot none rw 1,0 3788800 verity payload=ROOT_DEV hashtree=HASH_DEV hashstart=3788800 alg=sha1 root_hexdigest=55052b629d3ac889f25a9583ea12cdcd3ea15ff8 salt=a2d4d9e574069f4fed5e3961b99054b7a4905414b60a25d89974a7334021165c" noinitrd vt.global_cursor_default=0 kern_guid=35c775e7-3735-d745-93e5-d9e0238f7ed0 add_efi_memmap boot=local noresume noswap i915.modeset=1 tpm_tis.force=1 tpm_tis.interrupts=0 nmi_watchdog=panic,lapic disablevmx=off + X86 setup: 77b56010 + Logo: (none) + FDT: + Error: 0 + +Note that `Buffer` is 0 so it has not be read yet. Using `bootflow read`:: + + => bootfl read + => bootfl info + Name: + Device: emmc@1c,0.bootdev + Block dev: emmc@1c,0.blk + Method: cros + State: ready + Partition: 2 + Subdir: (none) + Filename: + Buffer: 77b7e400 + Size: 63ee00 (6548992 bytes) + OS: ChromeOS + Cmdline: console= loglevel=7 init=/sbin/init cros_secure oops=panic panic=-1 root=PARTUUID=35c775e7-3735-d745-93e5-d9e0238f7ed0/PARTNROFF=1 rootwait rw dm_verity.error_behavior=3 dm_verity.max_bios=-1 dm_verity.dev_wait=0 dm="1 vroot none rw 1,0 3788800 verity payload=ROOT_DEV hashtree=HASH_DEV hashstart=3788800 alg=sha1 root_hexdigest=55052b629d3ac889f25a9583ea12cdcd3ea15ff8 salt=a2d4d9e574069f4fed5e3961b99054b7a4905414b60a25d89974a7334021165c" noinitrd vt.global_cursor_default=0 kern_guid=35c775e7-3735-d745-93e5-d9e0238f7ed0 add_efi_memmap boot=local noresume noswap i915.modeset=1 tpm_tis.force=1 tpm_tis.interrupts=0 nmi_watchdog=panic,lapic disablevmx=off + X86 setup: 781b4400 + Logo: (none) + FDT: + Error: 0 + +Now the buffer can be accessed:: + + => md 77b7e400 + 77b7e400: 1186f6fc 40000002 b8fa0c75 00000018 .......@u....... + 77b7e410: c08ed88e a68dd08e 000001e8 000000e8 ................ + 77b7e420: ed815d00 00000021 62c280b8 89e80100 .]..!......b.... + 77b7e430: 22f7e8c4 c0850061 22ec850f eb890061 ..."a......"a... + 77b7e440: 0230868b 01480000 21d0f7c3 00fb81c3 ..0...H....!.... + 77b7e450: 7d010000 0000bb05 c3810100 00d4f000 ...}............ + 77b7e460: 8130858d 85890061 00618132 3095010f ..0.a...2.a....0 + 77b7e470: 0f006181 c883e020 e0220f20 e000bb8d .a.. ... ."..... + 77b7e480: c0310062 001800b9 8dabf300 62e000bb b.1............b + 77b7e490: 07878d00 89000010 00bb8d07 8d0062f0 .............b.. + 77b7e4a0: 00100787 0004b900 07890000 00100005 ................ + 77b7e4b0: 08c78300 8df37549 630000bb 0183b800 ....Iu.....c.... + 77b7e4c0: 00b90000 89000008 00000507 c7830020 ............ ... + 77b7e4d0: f3754908 e000838d 220f0062 0080b9d8 .Iu.....b..".... + 77b7e4e0: 320fc000 08e8ba0f c031300f b8d0000f ...2.....01..... + 77b7e4f0: 00000020 6ad8000f 00858d10 50000002 ......j.......P + Return value ------------ -- cgit v1.2.3