From 4cf712a3be84de9c4bc8273b6734684e2b0b4e49 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 18 Jan 2025 07:14:35 +0100 Subject: net: miiphybb: configs: Drop CONFIG_BITBANGMII_MULTI It seems that every remaining system which enables BITBANGMII also enables BITBANGMII_MULTI . Remove the BITBANGMII_MULTI symbol and assume it is always enabled. This allows removal of a bit of legacy code. No functional change intended. Signed-off-by: Marek Vasut Reviewed-by: Paul Barker --- doc/README.bitbangMII | 25 ++++--------------------- 1 file changed, 4 insertions(+), 21 deletions(-) (limited to 'doc') diff --git a/doc/README.bitbangMII b/doc/README.bitbangMII index 0a2fa48a56f..05ab20376f3 100644 --- a/doc/README.bitbangMII +++ b/doc/README.bitbangMII @@ -7,28 +7,11 @@ The driver requires that the following macros should be defined into the board configuration file: CONFIG_BITBANGMII - Enable the miiphybb driver -CONFIG_BITBANGMII_MULTI - Enable the multi bus support -If the CONFIG_BITBANGMII_MULTI is not defined, the board's config file needs -to define at least the following macros: - -MII_INIT - Generic code to enable the MII bus (optional) -MDIO_DECLARE - Declaration needed to access to the MDIO pin (optional) -MDIO_ACTIVE - Activate the MDIO pin as out pin -MDIO_TRISTATE - Activate the MDIO pin as input/tristate pin -MDIO_READ - Read the MDIO pin -MDIO(v) - Write v on the MDIO pin -MDC_DECLARE - Declaration needed to access to the MDC pin (optional) -MDC(v) - Write v on the MDC pin - -The previous macros make the driver compatible with the previous version -(that didn't support the multi-bus). - -When the CONFIG_BITBANGMII_MULTI is also defined, the board code needs to fill -the bb_miiphy_buses[] array with a record for each required bus and declare -the bb_miiphy_buses_num variable with the number of mii buses. -The record (struct bb_miiphy_bus) has the following fields/callbacks (see -miiphy.h for details): +The board code needs to fill the bb_miiphy_buses[] array with a record for +each required bus and declare the bb_miiphy_buses_num variable with the +number of mii buses. The record (struct bb_miiphy_bus) has the following +fields/callbacks (see miiphy.h for details): char name[] - The symbolic name that must be equal to the MII bus registered name -- cgit v1.3.1