From 9e3ed392d2c8965e24c942b58796c31c644c2f70 Mon Sep 17 00:00:00 2001 From: Joe Hamman Date: Thu, 13 Dec 2007 06:45:14 -0600 Subject: mpc85xx: Add support for SBC8548 (updated) Add support for Wind River's SBC8548 reference board. Signed-off by: Joe Hamman --- doc/README.sbc8548 | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 doc/README.sbc8548 (limited to 'doc') diff --git a/doc/README.sbc8548 b/doc/README.sbc8548 new file mode 100644 index 00000000000..b34d0406cbb --- /dev/null +++ b/doc/README.sbc8548 @@ -0,0 +1,27 @@ +Wind River SBC8548 reference board +=========================== + +Copyright 2007, Embedded Specialties, Inc. +Copyright 2007 Wind River Systemes, Inc. +----------------------------- + +1. Building U-Boot +------------------ +The SBC8548 code is known to build using ELDK 4.1. + + $ make sbc8548_config + Configuring for sbc8548 board... + + $ make + + +2. Switch and Jumper Settings +----------------------------- +All Jumpers & Switches are in their default positions. Please refer to +the board documentation for details. Some settings control CPU voltages +and settings may change with board revisions. + +3. Known limitations +-------------------- +PCI: + The code to support PCI is currently disabled and has not been verified. -- cgit v1.2.3 From 7bd6104b71de9bca80ac8e0936003443bb42f2fc Mon Sep 17 00:00:00 2001 From: robert lazarski Date: Fri, 21 Dec 2007 10:36:37 -0500 Subject: mpc85xx: Add support for ATUM8548 (updated) Add support for Instituto Atlantico's ATUM8548 board Signed-off-by: robert lazarski --- doc/README.atum8548 | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 doc/README.atum8548 (limited to 'doc') diff --git a/doc/README.atum8548 b/doc/README.atum8548 new file mode 100644 index 00000000000..4eb56bae2fc --- /dev/null +++ b/doc/README.atum8548 @@ -0,0 +1,29 @@ +Building U-Boot +--------------- + +The ATUM8548 code is known to build using ELDK 4.1. + +$ make ATUM8548_config +Configuring for ATUM8548 board... +$ make + +Using Flash +----------- + +The ATUM8548 board has one flash bank, of 128MB in size (2^23 = 0x08000000). + +The BDI2000 commands for copying u-boot into flash are +as follows: + + erase 0xFFF80000 0x4000 0x20 + prog 0xfff80000 uboot.bin bin + +Booting Linux +------------- + +U-boot/kermit commands for booting linux via NFS - assumming the proper +bootargs are set - are as follows: + + tftp 1000000 uImage.atum + tftp c00000 mpc8548atum.dtb + bootm 1000000 - c00000 -- cgit v1.2.3