From a2f0b504f4a9320c97bcf1cbd67f42de8a08fbc6 Mon Sep 17 00:00:00 2001 From: Heinrich Schuchardt Date: Wed, 17 Jun 2020 10:53:29 +0200 Subject: cmd: drop fitupd command The `fitupd' command is not used by any board. The `dfu tftp' command provides the same capabilities. So let's drop the `fitupd' command. Signed-off-by: Heinrich Schuchardt --- doc/README.dfutftp | 2 -- doc/README.update | 5 ----- 2 files changed, 7 deletions(-) (limited to 'doc') diff --git a/doc/README.dfutftp b/doc/README.dfutftp index 127d2d6abcc..a3341bbb614 100644 --- a/doc/README.dfutftp +++ b/doc/README.dfutftp @@ -42,8 +42,6 @@ for USB based DFU (CONFIG_DFU_*) and DFU TFTP update The "dfu" command has been extended to support transfer via TFTP - one needs to type for example "dfu tftp 0 mmc 0" -This feature does not depend on "fitupd" command enabled. - As of this writing (SHA1:8d77576371381ade83de475bb639949b44941e8c v2015.10-rc2) the update.c code is not enabled (CONFIG_UPDATE_TFTP) by any board in the contemporary u-boot tree. diff --git a/doc/README.update b/doc/README.update index d37f2c4d4a5..bf4379279e2 100644 --- a/doc/README.update +++ b/doc/README.update @@ -51,11 +51,6 @@ the mkimage tool. dtc tool with support for binary includes, e.g. in version to be prepared. Refer to the doc/uImage.FIT/ directory for more details on FIT images. -This mechanism can be also triggered by the command "fitupd". -If an optional, non-zero address is provided as argument, the TFTP transfer -is skipped and the image at this address is used. -The fitupd command is enabled by CONFIG_CMD_FITUPD. - Example .its files ------------------ -- cgit v1.3.1