From f175603f7c4fe614c913476bfec78a36ae8be7a3 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 18 Apr 2014 10:56:11 -0600 Subject: ARM: tegra: set CONFIG_SYS_MMC_MAX_DEVICE If CONFIG_API is ever to be enabled on Tegra, this define must be set, since api/api_storage.c uses it. A couple of annoyting things about CONFIG_SYS_MMC_MAX_DEVICE 1) It isn't documented in README. The same is true for a lot of similar defines used by api_storage.c. 2) It doesn't represent MAX_DEVICE but rather NUM_DEVICES, since the valid values are 0..n-1 not 0..n. However, I this patch does not address those shortcomings. Signed-off-by: Stephen Warren Signed-off-by: Tom Warren --- drivers/mmc/tegra_mmc.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/tegra_mmc.c b/drivers/mmc/tegra_mmc.c index ed67eec2527..ca9c4aa15fe 100644 --- a/drivers/mmc/tegra_mmc.c +++ b/drivers/mmc/tegra_mmc.c @@ -18,7 +18,7 @@ DECLARE_GLOBAL_DATA_PTR; -struct mmc_host mmc_host[MAX_HOSTS]; +struct mmc_host mmc_host[CONFIG_SYS_MMC_MAX_DEVICE]; #ifndef CONFIG_OF_CONTROL #error "Please enable device tree support to use this driver" @@ -669,13 +669,14 @@ static int process_nodes(const void *blob, int node_list[], int count) void tegra_mmc_init(void) { - int node_list[MAX_HOSTS], count; + int node_list[CONFIG_SYS_MMC_MAX_DEVICE], count; const void *blob = gd->fdt_blob; debug("%s entry\n", __func__); /* See if any Tegra124 MMC controllers are present */ count = fdtdec_find_aliases_for_id(blob, "sdhci", - COMPAT_NVIDIA_TEGRA124_SDMMC, node_list, MAX_HOSTS); + COMPAT_NVIDIA_TEGRA124_SDMMC, node_list, + CONFIG_SYS_MMC_MAX_DEVICE); debug("%s: count of Tegra124 sdhci nodes is %d\n", __func__, count); if (process_nodes(blob, node_list, count)) { printf("%s: Error processing T30 mmc node(s)!\n", __func__); @@ -684,7 +685,8 @@ void tegra_mmc_init(void) /* See if any Tegra30 MMC controllers are present */ count = fdtdec_find_aliases_for_id(blob, "sdhci", - COMPAT_NVIDIA_TEGRA30_SDMMC, node_list, MAX_HOSTS); + COMPAT_NVIDIA_TEGRA30_SDMMC, node_list, + CONFIG_SYS_MMC_MAX_DEVICE); debug("%s: count of T30 sdhci nodes is %d\n", __func__, count); if (process_nodes(blob, node_list, count)) { printf("%s: Error processing T30 mmc node(s)!\n", __func__); @@ -693,7 +695,8 @@ void tegra_mmc_init(void) /* Now look for any Tegra20 MMC controllers */ count = fdtdec_find_aliases_for_id(blob, "sdhci", - COMPAT_NVIDIA_TEGRA20_SDMMC, node_list, MAX_HOSTS); + COMPAT_NVIDIA_TEGRA20_SDMMC, node_list, + CONFIG_SYS_MMC_MAX_DEVICE); debug("%s: count of T20 sdhci nodes is %d\n", __func__, count); if (process_nodes(blob, node_list, count)) { printf("%s: Error processing T20 mmc node(s)!\n", __func__); -- cgit v1.3.1 From eceb3f26f407d65dae3902180b3c9f3128f0f349 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Tue, 22 Apr 2014 14:37:53 -0600 Subject: ARM: tegra: add GPIO initialization table function The HW-defined procedure for booting Tegra requires that some pins be set up as GPIOs immediately at boot in order to avoid glitches on those pins, when the pinmux is programmed. Add a feature to the GPIO driver which executes a GPIO configuration table. Board files will use this to implement the correct HW initialization procedure. Signed-off-by: Stephen Warren Signed-off-by: Tom Warren --- arch/arm/include/asm/arch-tegra/gpio.h | 20 ++++++++++++++++++++ drivers/gpio/tegra_gpio.c | 20 ++++++++++++++++++++ 2 files changed, 40 insertions(+) (limited to 'drivers') diff --git a/arch/arm/include/asm/arch-tegra/gpio.h b/arch/arm/include/asm/arch-tegra/gpio.h index d97190dd7cf..44cd455699e 100644 --- a/arch/arm/include/asm/arch-tegra/gpio.h +++ b/arch/arm/include/asm/arch-tegra/gpio.h @@ -14,11 +14,31 @@ #define GPIO_FULLPORT(x) ((x) >> 3) #define GPIO_BIT(x) ((x) & 0x7) +enum tegra_gpio_init { + TEGRA_GPIO_INIT_IN, + TEGRA_GPIO_INIT_OUT0, + TEGRA_GPIO_INIT_OUT1, +}; + +struct tegra_gpio_config { + u32 gpio:16; + u32 init:2; +}; + /* * Tegra-specific GPIO API */ +/** + * Configure a list of GPIOs + * + * @param config List of GPIO configurations + * @param len Number of config items in list + */ +void gpio_config_table(const struct tegra_gpio_config *config, int len); + void gpio_info(void); #define gpio_status() gpio_info() + #endif /* TEGRA_GPIO_H_ */ diff --git a/drivers/gpio/tegra_gpio.c b/drivers/gpio/tegra_gpio.c index 82b30d5ab68..fea9d17f8e6 100644 --- a/drivers/gpio/tegra_gpio.c +++ b/drivers/gpio/tegra_gpio.c @@ -221,6 +221,26 @@ int gpio_set_value(unsigned gpio, int value) return 0; } +void gpio_config_table(const struct tegra_gpio_config *config, int len) +{ + int i; + + for (i = 0; i < len; i++) { + switch (config[i].init) { + case TEGRA_GPIO_INIT_IN: + gpio_direction_input(config[i].gpio); + break; + case TEGRA_GPIO_INIT_OUT0: + gpio_direction_output(config[i].gpio, 0); + break; + case TEGRA_GPIO_INIT_OUT1: + gpio_direction_output(config[i].gpio, 1); + break; + } + set_config(config[i].gpio, 1); + } +} + /* * Display Tegra GPIO information */ -- cgit v1.3.1