From 9ac57fb3a25708d4406d3ac32e3ef09cce331bbf Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Mon, 13 Nov 2023 01:16:48 +0000 Subject: mtd: spi-nor: Add support for zBIT ZB25VQ128 Add support for the zBIT ZB25VQ128 (128M-bit) SPI NOR flash memory chip, as used on the Xunlong Orange Pi Zero 3 board. Signed-off-by: Andre Przywara Reviewed-by: Dragan Simic --- drivers/mtd/spi/Kconfig | 5 +++++ drivers/mtd/spi/spi-nor-ids.c | 5 +++++ 2 files changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig index 732b0760452..abed392c28d 100644 --- a/drivers/mtd/spi/Kconfig +++ b/drivers/mtd/spi/Kconfig @@ -224,6 +224,11 @@ config SPI_FLASH_XTX Add support for various XTX (XTX Technology Limited) SPI flash chips (XT25xxx). +config SPI_FLASH_ZBIT + bool "ZBIT SPI flash support" + help + Add support for Zbit Semiconductor Inc. SPI flash chips (ZB25xxx). + endif config SPI_FLASH_USE_4K_SECTORS diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c index 3cb132dcffc..f86e7ff8e58 100644 --- a/drivers/mtd/spi/spi-nor-ids.c +++ b/drivers/mtd/spi/spi-nor-ids.c @@ -571,6 +571,11 @@ const struct flash_info spi_nor_ids[] = { SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, { INFO("xt25w01g", 0x0b651B, 0, 64 * 1024, 2048, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, +#endif +#ifdef CONFIG_SPI_FLASH_ZBIT + /* Zbit Semiconductor Inc. */ + { INFO("zb25vq128", 0x5e4018, 0, 64 * 1024, 256, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, #endif { }, }; -- cgit v1.3.1 From 929f198d07f39b4a0b901a9f022581bf540bee1f Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Tue, 17 Oct 2023 17:08:52 +0100 Subject: sunxi: H616: remove default AXP305 selection The original H616 devices released about three years ago were typically paired with an X-Powers AXP305 PMIC. Newer devices uses the smaller AXP313, and there seem to be far more systems with this PMIC around now. Remove the default AXP305 selection for the H616 SoC from the Kconfig, and move the PMIC selection into the board defconfig files instead. Signed-off-by: Andre Przywara Reviewed-by: Jaehoon Chung --- configs/orangepi_zero2_defconfig | 1 + configs/x96_mate_defconfig | 1 + drivers/power/Kconfig | 1 - 3 files changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/configs/orangepi_zero2_defconfig b/configs/orangepi_zero2_defconfig index 50009e823cb..98aed846f1f 100644 --- a/configs/orangepi_zero2_defconfig +++ b/configs/orangepi_zero2_defconfig @@ -20,6 +20,7 @@ CONFIG_SYS_I2C_SPEED=400000 CONFIG_SPI_FLASH_MACRONIX=y CONFIG_PHY_REALTEK=y CONFIG_SUN8I_EMAC=y +CONFIG_AXP305_POWER=y CONFIG_SPI=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/configs/x96_mate_defconfig b/configs/x96_mate_defconfig index 318951e19c2..e805e0952b3 100644 --- a/configs/x96_mate_defconfig +++ b/configs/x96_mate_defconfig @@ -18,6 +18,7 @@ CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 +CONFIG_AXP305_POWER=y CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 2395720c99c..33b8bc1214d 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -56,7 +56,6 @@ choice depends on ARCH_SUNXI default AXP209_POWER if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I default AXP221_POWER if MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_R40 - default AXP305_POWER if MACH_SUN50I_H616 default AXP818_POWER if MACH_SUN8I_A83T default SUNXI_NO_PMIC if MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_V3S -- cgit v1.3.1