From b14ca4b61a681f75f3125676e09d7ce6af66e927 Mon Sep 17 00:00:00 2001 From: Dave Mitchell Date: Thu, 20 Nov 2008 14:00:49 -0600 Subject: ppc4xx: Added ppc4xx-isram.h for internal SRAM and L2 cache DCRs Added include/asm-ppc/ppc4xx-isram.h and moved internal SRAM and L2 cache DCRs from ppc440.h to this new header. Also converted these DCR defines from lowercase to uppercase and modified referencing modules to use them. Signed-off-by: Dave Mitchell Signed-off-by: Stefan Roese --- include/asm-ppc/ppc4xx-isram.h | 75 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 75 insertions(+) create mode 100644 include/asm-ppc/ppc4xx-isram.h (limited to 'include/asm-ppc') diff --git a/include/asm-ppc/ppc4xx-isram.h b/include/asm-ppc/ppc4xx-isram.h new file mode 100644 index 00000000000..d6d17ac961b --- /dev/null +++ b/include/asm-ppc/ppc4xx-isram.h @@ -0,0 +1,75 @@ + +/* + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _PPC4xx_ISRAM_H_ +#define _PPC4xx_ISRAM_H_ + +/* + * Internal SRAM + */ +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) +#define ISRAM0_DCR_BASE 0x380 +#else +#define ISRAM0_DCR_BASE 0x020 +#endif +#define ISRAM0_SB0CR (ISRAM0_DCR_BASE+0x00) /* SRAM bank config 0*/ +#define ISRAM0_SB1CR (ISRAM0_DCR_BASE+0x01) /* SRAM bank config 1*/ +#define ISRAM0_SB2CR (ISRAM0_DCR_BASE+0x02) /* SRAM bank config 2*/ +#define ISRAM0_SB3CR (ISRAM0_DCR_BASE+0x03) /* SRAM bank config 3*/ +#define ISRAM0_BEAR (ISRAM0_DCR_BASE+0x04) /* SRAM bus error addr reg */ +#define ISRAM0_BESR0 (ISRAM0_DCR_BASE+0x05) /* SRAM bus error status reg 0 */ +#define ISRAM0_BESR1 (ISRAM0_DCR_BASE+0x06) /* SRAM bus error status reg 1 */ +#define ISRAM0_PMEG (ISRAM0_DCR_BASE+0x07) /* SRAM power management */ +#define ISRAM0_CID (ISRAM0_DCR_BASE+0x08) /* SRAM bus core id reg */ +#define ISRAM0_REVID (ISRAM0_DCR_BASE+0x09) /* SRAM bus revision id reg */ +#define ISRAM0_DPC (ISRAM0_DCR_BASE+0x0a) /* SRAM data parity check reg */ + +#if defined(CONFIG_460EX) || defined(CONFIG_460GT) +#define ISRAM1_DCR_BASE 0x0B0 +#define ISRAM1_SB0CR (ISRAM1_DCR_BASE+0x00) /* SRAM1 bank config 0*/ +#define ISRAM1_BEAR (ISRAM1_DCR_BASE+0x04) /* SRAM1 bus error addr reg */ +#define ISRAM1_BESR0 (ISRAM1_DCR_BASE+0x05) /* SRAM1 bus error status reg 0 */ +#define ISRAM1_BESR1 (ISRAM1_DCR_BASE+0x06) /* SRAM1 bus error status reg 1 */ +#define ISRAM1_PMEG (ISRAM1_DCR_BASE+0x07) /* SRAM1 power management */ +#define ISRAM1_CID (ISRAM1_DCR_BASE+0x08) /* SRAM1 bus core id reg */ +#define ISRAM1_REVID (ISRAM1_DCR_BASE+0x09) /* SRAM1 bus revision id reg */ +#define ISRAM1_DPC (ISRAM1_DCR_BASE+0x0a) /* SRAM1 data parity check reg */ +#endif /* CONFIG_460EX || CONFIG_460GT */ + +/* + * L2 Cache + */ +#if defined (CONFIG_440GX) || \ + defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ + defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ + defined(CONFIG_460SX) +#define L2_CACHE_BASE 0x030 +#define L2_CACHE_CFG (L2_CACHE_BASE+0x00) /* L2 Cache Config */ +#define L2_CACHE_CMD (L2_CACHE_BASE+0x01) /* L2 Cache Command */ +#define L2_CACHE_ADDR (L2_CACHE_BASE+0x02) /* L2 Cache Address */ +#define L2_CACHE_DATA (L2_CACHE_BASE+0x03) /* L2 Cache Data */ +#define L2_CACHE_STAT (L2_CACHE_BASE+0x04) /* L2 Cache Status */ +#define L2_CACHE_CVER (L2_CACHE_BASE+0x05) /* L2 Cache Revision ID */ +#define L2_CACHE_SNP0 (L2_CACHE_BASE+0x06) /* L2 Cache Snoop reg 0 */ +#define L2_CACHE_SNP1 (L2_CACHE_BASE+0x07) /* L2 Cache Snoop reg 1 */ +#endif /* CONFIG_440GX */ + +#endif /* _PPC4xx_ISRAM_H_ */ -- cgit v1.3.1 From 9427ccde0355a2ebf47454e8e1be59f5b9864e08 Mon Sep 17 00:00:00 2001 From: Peter Tyser Date: Mon, 1 Dec 2008 13:47:12 -0600 Subject: 85xx: Add PORDEVSR_PCI1 define Add define used to determine if PCI1 interface is in PCI or PCIX mode. Convert users of the old PORDEVSR_PCI constant to use MPC85xx_PORDEVSR_PCI1 Signed-off-by: Peter Tyser Signed-off-by: Andy Fleming --- board/freescale/mpc8548cds/mpc8548cds.c | 2 +- board/sbc8548/sbc8548.c | 2 +- board/tqc/tqm85xx/tqm85xx.c | 2 +- cpu/mpc85xx/pci.c | 2 +- include/asm-ppc/immap_85xx.h | 3 +-- 5 files changed, 5 insertions(+), 6 deletions(-) (limited to 'include/asm-ppc') diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c index ba6bff585c1..c562fc9d955 100644 --- a/board/freescale/mpc8548cds/mpc8548cds.c +++ b/board/freescale/mpc8548cds/mpc8548cds.c @@ -332,7 +332,7 @@ pci_init_board(void) first_free_busno=hose->last_busno+1; printf ("PCI on bus %02x - %02x\n",hose->first_busno,hose->last_busno); #ifdef CONFIG_PCIX_CHECK - if (!(gur->pordevsr & PORDEVSR_PCI)) { + if (!(gur->pordevsr & MPC85xx_PORDEVSR_PCI1)) { /* PCI-X init */ if (CONFIG_SYS_CLK_FREQ < 66000000) printf("PCI-X will only work at 66 MHz\n"); diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c index 017f6b35cf6..8c073cb4bb2 100644 --- a/board/sbc8548/sbc8548.c +++ b/board/sbc8548/sbc8548.c @@ -412,7 +412,7 @@ pci_init_board(void) first_free_busno=hose->last_busno+1; printf ("PCI on bus %02x - %02x\n",hose->first_busno,hose->last_busno); #ifdef CONFIG_PCIX_CHECK - if (!(gur->pordevsr & PORDEVSR_PCI)) { + if (!(gur->pordevsr & MPC85xx_PORDEVSR_PCI1)) { /* PCI-X init */ if (CONFIG_SYS_CLK_FREQ < 66000000) printf("PCI-X will only work at 66 MHz\n"); diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c index 3a828edc1ad..73f1d01bdf2 100644 --- a/board/tqc/tqm85xx/tqm85xx.c +++ b/board/tqc/tqm85xx/tqm85xx.c @@ -610,7 +610,7 @@ static inline void init_pci1(void) first_free_busno = hose->last_busno + 1; #ifdef CONFIG_PCIX_CHECK - if (!(gur->pordevsr & PORDEVSR_PCI)) { + if (!(gur->pordevsr & MPC85xx_PORDEVSR_PCI1)) { ushort reg16 = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ | PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E; diff --git a/cpu/mpc85xx/pci.c b/cpu/mpc85xx/pci.c index 112f18c2b8b..787c6eb74c4 100644 --- a/cpu/mpc85xx/pci.c +++ b/cpu/mpc85xx/pci.c @@ -70,7 +70,7 @@ pci_mpc85xx_init(struct pci_controller *board_hose) */ pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); - if (!(gur->pordevsr & PORDEVSR_PCI)) { + if (!(gur->pordevsr & MPC85xx_PORDEVSR_PCI1)) { /* PCI-X init */ if (CONFIG_SYS_CLK_FREQ < 66000000) printf("PCI-X will only work at 66 MHz\n"); diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h index 75b451d2019..e5046bef321 100644 --- a/include/asm-ppc/immap_85xx.h +++ b/include/asm-ppc/immap_85xx.h @@ -1569,6 +1569,7 @@ typedef struct ccsr_gur { #define MPC85xx_PORDEVSR_SGMII3_DIS 0x08000000 #define MPC85xx_PORDEVSR_SGMII4_DIS 0x04000000 #define MPC85xx_PORDEVSR_SRDS2_IO_SEL 0x38000000 +#define MPC85xx_PORDEVSR_PCI1 0x00800000 #define MPC85xx_PORDEVSR_IO_SEL 0x00780000 #define MPC85xx_PORDEVSR_PCI2_ARB 0x00040000 #define MPC85xx_PORDEVSR_PCI1_ARB 0x00020000 @@ -1647,8 +1648,6 @@ typedef struct ccsr_gur { char res15[61648]; /* 0xe0f30 to 0xefffff */ } ccsr_gur_t; -#define PORDEVSR_PCI (0x00800000) /* PCI Mode */ - #define CONFIG_SYS_MPC85xx_GUTS_OFFSET (0xE0000) #define CONFIG_SYS_MPC85xx_GUTS_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_GUTS_OFFSET) #define CONFIG_SYS_MPC85xx_ECM_OFFSET (0x0000) -- cgit v1.3.1 From ea154a1781135d822eedee7567cc156089eae93c Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Mon, 24 Nov 2008 10:25:14 -0600 Subject: FSL: Moved BR_PHYS_ADDR for localbus to common header The BR_PHYS_ADDR macro is useful on all machines that have local bus which is pretty much all 83xx/85xx/86xx chips. Additionally most 85xx & 86xx will need it if they want to support 36-bit physical addresses. Signed-off-by: Kumar Gala Acked-by: Andy Fleming --- include/asm-ppc/fsl_lbc.h | 8 ++++++++ include/configs/MPC8641HPCN.h | 9 --------- 2 files changed, 8 insertions(+), 9 deletions(-) (limited to 'include/asm-ppc') diff --git a/include/asm-ppc/fsl_lbc.h b/include/asm-ppc/fsl_lbc.h index cac7bf6bf58..51fc5c13b0b 100644 --- a/include/asm-ppc/fsl_lbc.h +++ b/include/asm-ppc/fsl_lbc.h @@ -69,6 +69,14 @@ #define BR_RES ~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_ATOM | BR_V) #endif +/* Convert an address into the right format for the BR registers */ +#ifdef CONFIG_PHYS_64BIT +#define BR_PHYS_ADDR(x) ((unsigned long)((x & 0x0ffff8000ULL) | \ + ((x & 0x300000000ULL) >> 19))) +#else +#define BR_PHYS_ADDR(x) (x & 0xffff8000) +#endif + /* OR - Option Registers */ #define OR0 0x5004 /* Register offset to immr */ diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index cd9889495d9..5a832961c2d 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -186,17 +186,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_FLASH_BASE_PHYS (CONFIG_SYS_FLASH_BASE \ | CONFIG_SYS_PHYS_ADDR_HIGH) - #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} -/* Convert an address into the right format for the BR registers */ -#ifdef CONFIG_PHYS_64BIT -#define BR_PHYS_ADDR(x) ((unsigned long)((x & 0x0ffff8000ULL) | \ - ((x & 0x300000000ULL) >> 19))) -#else -#define BR_PHYS_ADDR(x) (x & 0xffff8000) -#endif - #define CONFIG_SYS_BR0_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \ | 0x00001001) /* port size 16bit */ #define CONFIG_SYS_OR0_PRELIM 0xff806ff7 /* 8MB Boot Flash area*/ -- cgit v1.3.1 From 65e43a10631537dcb92c302d36301a12308216c3 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 13 Dec 2008 17:20:27 -0600 Subject: Introduce virt_to_phys() virt_to_phys() returns the physical address given a virtual. In most cases this will be just the input value as the vast majority of systems run in a 1:1 mode. However in systems that are not running this way it should report the physical address or ~0 if no mapping exists for the given virtual address. Signed-off-by: Kumar Gala --- include/asm-arm/io.h | 5 +++++ include/asm-avr32/io.h | 5 +++++ include/asm-blackfin/io.h | 5 +++++ include/asm-i386/io.h | 5 +++++ include/asm-m68k/io.h | 5 +++++ include/asm-microblaze/io.h | 5 +++++ include/asm-mips/io.h | 2 +- include/asm-nios/io.h | 5 +++++ include/asm-nios2/io.h | 5 +++++ include/asm-ppc/io.h | 5 +++++ include/asm-sh/io.h | 5 +++++ include/asm-sparc/io.h | 5 +++++ 12 files changed, 56 insertions(+), 1 deletion(-) (limited to 'include/asm-ppc') diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h index f4ae3070036..fec3a7eace5 100644 --- a/include/asm-arm/io.h +++ b/include/asm-arm/io.h @@ -57,6 +57,11 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags) } +static inline phys_addr_t virt_to_phys(void * vaddr) +{ + return (phys_addr_t)(vaddr); +} + /* * Generic virtual read/write. Note that we don't support half-word * read/writes. We define __arch_*[bl] here, and leave __arch_*w diff --git a/include/asm-avr32/io.h b/include/asm-avr32/io.h index 06e52b137f5..d22cd356112 100644 --- a/include/asm-avr32/io.h +++ b/include/asm-avr32/io.h @@ -125,4 +125,9 @@ static inline void unmap_physmem(void *vaddr, unsigned long len) } +static inline phys_addr_t virt_to_phys(void * vaddr) +{ + return (phys_addr_t)(vaddr); +} + #endif /* __ASM_AVR32_IO_H */ diff --git a/include/asm-blackfin/io.h b/include/asm-blackfin/io.h index da58914987c..68064949834 100644 --- a/include/asm-blackfin/io.h +++ b/include/asm-blackfin/io.h @@ -64,6 +64,11 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags) } +static inline phys_addr_t virt_to_phys(void * vaddr) +{ + return (phys_addr_t)(vaddr); +} + /* * These are for ISA/PCI shared memory _only_ and should never be used * on any other type of memory, including Zorro memory. They are meant to diff --git a/include/asm-i386/io.h b/include/asm-i386/io.h index 2c57140fb39..9b757d489e3 100644 --- a/include/asm-i386/io.h +++ b/include/asm-i386/io.h @@ -229,4 +229,9 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags) } +static inline phys_addr_t virt_to_phys(void * vaddr) +{ + return (phys_addr_t)(vaddr); +} + #endif diff --git a/include/asm-m68k/io.h b/include/asm-m68k/io.h index 1fccc129232..50ea08751f1 100644 --- a/include/asm-m68k/io.h +++ b/include/asm-m68k/io.h @@ -251,4 +251,9 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags) } +static inline phys_addr_t virt_to_phys(void * vaddr) +{ + return (phys_addr_t)(vaddr); +} + #endif /* __ASM_M68K_IO_H__ */ diff --git a/include/asm-microblaze/io.h b/include/asm-microblaze/io.h index 8804724bff2..7e190d15c60 100644 --- a/include/asm-microblaze/io.h +++ b/include/asm-microblaze/io.h @@ -155,4 +155,9 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags) } +static inline phys_addr_t virt_to_phys(void * vaddr) +{ + return (phys_addr_t)(vaddr); +} + #endif /* __MICROBLAZE_IO_H__ */ diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h index 3a0f33f204d..031186d037f 100644 --- a/include/asm-mips/io.h +++ b/include/asm-mips/io.h @@ -118,7 +118,7 @@ static inline void set_io_port_base(unsigned long base) * Change virtual addresses to physical addresses and vv. * These are trivial on the 1:1 Linux/MIPS mapping */ -extern inline unsigned long virt_to_phys(volatile void * address) +extern inline phys_addr_t virt_to_phys(void * address) { return CPHYSADDR(address); } diff --git a/include/asm-nios/io.h b/include/asm-nios/io.h index 8b788068b3d..899682cc40d 100644 --- a/include/asm-nios/io.h +++ b/include/asm-nios/io.h @@ -133,4 +133,9 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags) } +static inline phys_addr_t virt_to_phys(void * vaddr) +{ + return (phys_addr_t)(vaddr); +} + #endif /* __ASM_NIOS_IO_H_ */ diff --git a/include/asm-nios2/io.h b/include/asm-nios2/io.h index 2f1ec26bd16..01d11efecea 100644 --- a/include/asm-nios2/io.h +++ b/include/asm-nios2/io.h @@ -53,6 +53,11 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags) } +static inline phys_addr_t virt_to_phys(void * vaddr) +{ + return (phys_addr_t)(vaddr); +} + extern unsigned char inb (unsigned char *port); extern unsigned short inw (unsigned short *port); extern unsigned inl (unsigned port); diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h index c3496818f04..c00de452d6d 100644 --- a/include/asm-ppc/io.h +++ b/include/asm-ppc/io.h @@ -298,4 +298,9 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags) } +static inline phys_addr_t virt_to_phys(void * vaddr) +{ + return (phys_addr_t)(vaddr); +} + #endif diff --git a/include/asm-sh/io.h b/include/asm-sh/io.h index adc3f81ed67..ca598a60f38 100644 --- a/include/asm-sh/io.h +++ b/include/asm-sh/io.h @@ -261,5 +261,10 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags) } +static inline phys_addr_t virt_to_phys(void * vaddr) +{ + return (phys_addr_t)(vaddr); +} + #endif /* __KERNEL__ */ #endif /* __ASM_SH_IO_H */ diff --git a/include/asm-sparc/io.h b/include/asm-sparc/io.h index 5f8d05cc36d..0c5d86cb3a9 100644 --- a/include/asm-sparc/io.h +++ b/include/asm-sparc/io.h @@ -90,4 +90,9 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags) } +static inline phys_addr_t virt_to_phys(void * vaddr) +{ + return (phys_addr_t)(vaddr); +} + #endif -- cgit v1.3.1 From b1ffecec37b57a59c139042267faac458e5324e9 Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Wed, 3 Dec 2008 23:04:37 -0600 Subject: powerpc: fix io.h build warning with CONFIG_PHYS_64BIT Casting a pointer to a phys_addr_t when it's an unsigned long long on a 32-bit system without first casting to a non-pointer type generates a compiler warning. Fix this. Signed-off-by: Becky Bruce --- include/asm-ppc/io.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/asm-ppc') diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h index c00de452d6d..64cb746b107 100644 --- a/include/asm-ppc/io.h +++ b/include/asm-ppc/io.h @@ -300,7 +300,7 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags) static inline phys_addr_t virt_to_phys(void * vaddr) { - return (phys_addr_t)(vaddr); + return (phys_addr_t)((unsigned long)vaddr); } #endif -- cgit v1.3.1 From ecf5b98c7a6a2e2256dfddd48fab26678dcd6b90 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 16 Dec 2008 14:59:20 -0600 Subject: 85xx: Add support to populate addr map based on TLB settings Signed-off-by: Kumar Gala --- cpu/mpc85xx/tlb.c | 34 ++++++++++++++++++++++++++++++++++ include/asm-ppc/mmu.h | 3 +++ lib_ppc/board.c | 8 ++++++++ 3 files changed, 45 insertions(+) (limited to 'include/asm-ppc') diff --git a/cpu/mpc85xx/tlb.c b/cpu/mpc85xx/tlb.c index a2d16ae2fa1..5b5f7914f2c 100644 --- a/cpu/mpc85xx/tlb.c +++ b/cpu/mpc85xx/tlb.c @@ -26,6 +26,11 @@ #include #include #include +#ifdef CONFIG_ADDR_MAP +#include +#endif + +DECLARE_GLOBAL_DATA_PTR; void set_tlb(u8 tlb, u32 epn, u64 rpn, u8 perms, u8 wimge, @@ -47,6 +52,11 @@ void set_tlb(u8 tlb, u32 epn, u64 rpn, mtspr(MAS7, _mas7); #endif asm volatile("isync;msync;tlbwe;isync"); + +#ifdef CONFIG_ADDR_MAP + if ((tlb == 1) && (gd->flags & GD_FLG_RELOC)) + addrmap_set_entry(epn, rpn, (1UL << ((tsize * 2) + 10)), esel); +#endif } void disable_tlb(u8 esel) @@ -67,6 +77,11 @@ void disable_tlb(u8 esel) mtspr(MAS7, _mas7); #endif asm volatile("isync;msync;tlbwe;isync"); + +#ifdef CONFIG_ADDR_MAP + if (gd->flags & GD_FLG_RELOC) + addrmap_set_entry(0, 0, 0, esel); +#endif } void invalidate_tlb(u8 tlb) @@ -91,6 +106,25 @@ void init_tlbs(void) return ; } +#ifdef CONFIG_ADDR_MAP +void init_addr_map(void) +{ + int i; + + for (i = 0; i < num_tlb_entries; i++) { + if (tlb_table[i].tlb == 0) + continue; + + addrmap_set_entry(tlb_table[i].epn, + tlb_table[i].rpn, + (1UL << ((tlb_table[i].tsize * 2) + 10)), + tlb_table[i].esel); + } + + return ; +} +#endif + unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg) { unsigned int tlb_size; diff --git a/include/asm-ppc/mmu.h b/include/asm-ppc/mmu.h index 8975e6c90a8..6d942d083a0 100644 --- a/include/asm-ppc/mmu.h +++ b/include/asm-ppc/mmu.h @@ -431,6 +431,9 @@ extern void set_tlb(u8 tlb, u32 epn, u64 rpn, extern void disable_tlb(u8 esel); extern void invalidate_tlb(u8 tlb); extern void init_tlbs(void); +#ifdef CONFIG_ADDR_MAP +extern void init_addr_map(void); +#endif extern unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg); #define SET_TLB_ENTRY(_tlb, _epn, _rpn, _perms, _wimge, _ts, _esel, _sz, _iprot) \ diff --git a/lib_ppc/board.c b/lib_ppc/board.c index 289a32a6441..61c29b563d0 100644 --- a/lib_ppc/board.c +++ b/lib_ppc/board.c @@ -75,6 +75,10 @@ #include #endif +#ifdef CONFIG_ADDR_MAP +#include +#endif + #ifdef CONFIG_SYS_UPDATE_FLASH_SIZE extern int update_flash_size (int flash_size); #endif @@ -694,6 +698,10 @@ void board_init_r (gd_t *id, ulong dest_addr) */ trap_init (dest_addr); +#if defined(CONFIG_ADDR_MAP) && defined(CONFIG_E500) + init_addr_map(); +#endif + #if defined(CONFIG_BOARD_EARLY_INIT_R) board_early_init_r (); #endif -- cgit v1.3.1 From 77c8115b1f1871811633eae77a5a700fac1f0e50 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 16 Dec 2008 14:59:21 -0600 Subject: ppc: Use addrmap in virt_to_phys and map_physmem. If we have addr map support enabled use the mapping functions to implement virt_to_phys() and map_physmem(). Signed-off-by: Kumar Gala --- include/asm-ppc/io.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include/asm-ppc') diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h index 64cb746b107..4ddad26e818 100644 --- a/include/asm-ppc/io.h +++ b/include/asm-ppc/io.h @@ -10,6 +10,10 @@ #include #include +#ifdef CONFIG_ADDR_MAP +#include +#endif + #define SIO_CONFIG_RA 0x398 #define SIO_CONFIG_RD 0x399 @@ -287,7 +291,11 @@ extern inline void out_be32(volatile unsigned __iomem *addr, int val) static inline void * map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags) { +#ifdef CONFIG_ADDR_MAP + return (void *)(addrmap_phys_to_virt(paddr)); +#else return (void *)((unsigned long)paddr); +#endif } /* @@ -300,7 +308,11 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags) static inline phys_addr_t virt_to_phys(void * vaddr) { +#ifdef CONFIG_ADDR_MAP + return addrmap_virt_to_phys(vaddr); +#else return (phys_addr_t)((unsigned long)vaddr); +#endif } #endif -- cgit v1.3.1 From a5d212a263c58cc746481bf1fc878510533ce7d6 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Wed, 3 Dec 2008 15:16:34 -0800 Subject: mpc8xxx: LCRR[CLKDIV] is sometimes five bits On newer CPUs, 8536, 8572, and 8610, the CLKDIV field of LCRR is five bits instead of four. In order to avoid an ifdef, LCRR_CLKDIV is set to 0x1f on all systems. It should be safe as the fifth bit was defined as reserved and set to 0. Code that was using a hard coded 0x0f is changed to use LCRR_CLKDIV. Signed-off-by: Trent Piepho Acked-by: Kumar Gala Acked-by: Jon Loeliger --- board/freescale/mpc8540ads/mpc8540ads.c | 2 +- board/freescale/mpc8541cds/mpc8541cds.c | 2 +- board/freescale/mpc8548cds/mpc8548cds.c | 2 +- board/freescale/mpc8555cds/mpc8555cds.c | 2 +- board/freescale/mpc8560ads/mpc8560ads.c | 2 +- board/freescale/mpc8568mds/mpc8568mds.c | 2 +- board/mpc8540eval/mpc8540eval.c | 2 +- board/pm854/pm854.c | 2 +- board/pm856/pm856.c | 2 +- board/sbc8548/sbc8548.c | 2 +- board/socrates/socrates.c | 2 +- board/tqc/tqm85xx/tqm85xx.c | 2 +- cpu/mpc85xx/cpu.c | 2 +- cpu/mpc86xx/cpu.c | 2 +- include/asm-ppc/fsl_lbc.h | 5 ++++- 15 files changed, 18 insertions(+), 15 deletions(-) (limited to 'include/asm-ppc') diff --git a/board/freescale/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c index a0b6fbd1216..9e3f67768cf 100644 --- a/board/freescale/mpc8540ads/mpc8540ads.c +++ b/board/freescale/mpc8540ads/mpc8540ads.c @@ -133,7 +133,7 @@ local_bus_init(void) */ get_sys_info(&sysinfo); - clkdiv = lbc->lcrr & 0x0f; + clkdiv = lbc->lcrr & LCRR_CLKDIV; lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; if (lbc_hz < 66) { diff --git a/board/freescale/mpc8541cds/mpc8541cds.c b/board/freescale/mpc8541cds/mpc8541cds.c index 7e40c5c80a0..e6025c8a567 100644 --- a/board/freescale/mpc8541cds/mpc8541cds.c +++ b/board/freescale/mpc8541cds/mpc8541cds.c @@ -308,7 +308,7 @@ local_bus_init(void) */ get_sys_info(&sysinfo); - clkdiv = lbc->lcrr & 0x0f; + clkdiv = lbc->lcrr & LCRR_CLKDIV; lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; if (lbc_hz < 66) { diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c index c562fc9d955..90e89bc7192 100644 --- a/board/freescale/mpc8548cds/mpc8548cds.c +++ b/board/freescale/mpc8548cds/mpc8548cds.c @@ -125,7 +125,7 @@ local_bus_init(void) sys_info_t sysinfo; get_sys_info(&sysinfo); - clkdiv = (lbc->lcrr & 0x0f) * 2; + clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2; lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; gur->lbiuiplldcr1 = 0x00078080; diff --git a/board/freescale/mpc8555cds/mpc8555cds.c b/board/freescale/mpc8555cds/mpc8555cds.c index 33685c19f39..53d5a936af3 100644 --- a/board/freescale/mpc8555cds/mpc8555cds.c +++ b/board/freescale/mpc8555cds/mpc8555cds.c @@ -308,7 +308,7 @@ local_bus_init(void) */ get_sys_info(&sysinfo); - clkdiv = lbc->lcrr & 0x0f; + clkdiv = lbc->lcrr & LCRR_CLKDIV; lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; if (lbc_hz < 66) { diff --git a/board/freescale/mpc8560ads/mpc8560ads.c b/board/freescale/mpc8560ads/mpc8560ads.c index 37308189d20..ac7778e25c7 100644 --- a/board/freescale/mpc8560ads/mpc8560ads.c +++ b/board/freescale/mpc8560ads/mpc8560ads.c @@ -337,7 +337,7 @@ local_bus_init(void) */ get_sys_info(&sysinfo); - clkdiv = lbc->lcrr & 0x0f; + clkdiv = lbc->lcrr & LCRR_CLKDIV; lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; if (lbc_hz < 66) { diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c index bc93be80fcb..7a23b338a59 100644 --- a/board/freescale/mpc8568mds/mpc8568mds.c +++ b/board/freescale/mpc8568mds/mpc8568mds.c @@ -188,7 +188,7 @@ local_bus_init(void) sys_info_t sysinfo; get_sys_info(&sysinfo); - clkdiv = (lbc->lcrr & 0x0f) * 2; + clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2; lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; gur->lbiuiplldcr1 = 0x00078080; diff --git a/board/mpc8540eval/mpc8540eval.c b/board/mpc8540eval/mpc8540eval.c index fa0a3368666..bf270f4ce64 100644 --- a/board/mpc8540eval/mpc8540eval.c +++ b/board/mpc8540eval/mpc8540eval.c @@ -101,7 +101,7 @@ phys_size_t initdram (int board_type) #if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus is not emulating flash */ get_sys_info(&sysinfo); /* if localbus freq is less than 66MHz,we use bypass mode,otherwise use DLL */ - if(sysinfo.freqSystemBus/(CONFIG_SYS_LBC_LCRR & 0x0f) < 66000000) { + if(sysinfo.freqSystemBus/(CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV) < 66000000) { lbc->lcrr = (CONFIG_SYS_LBC_LCRR & 0x0fffffff)| 0x80000000; } else { lbc->lcrr = CONFIG_SYS_LBC_LCRR & 0x7fffffff; diff --git a/board/pm854/pm854.c b/board/pm854/pm854.c index fed0ed43187..5353d738b4c 100644 --- a/board/pm854/pm854.c +++ b/board/pm854/pm854.c @@ -150,7 +150,7 @@ local_bus_init(void) */ get_sys_info(&sysinfo); - clkdiv = lbc->lcrr & 0x0f; + clkdiv = lbc->lcrr & LCRR_CLKDIV; lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; if (lbc_hz < 66) { diff --git a/board/pm856/pm856.c b/board/pm856/pm856.c index 932f1121e85..b14a3d34b1f 100644 --- a/board/pm856/pm856.c +++ b/board/pm856/pm856.c @@ -306,7 +306,7 @@ local_bus_init(void) */ get_sys_info(&sysinfo); - clkdiv = lbc->lcrr & 0x0f; + clkdiv = lbc->lcrr & LCRR_CLKDIV; lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; if (lbc_hz < 66) { diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c index 8c073cb4bb2..519b0f749d3 100644 --- a/board/sbc8548/sbc8548.c +++ b/board/sbc8548/sbc8548.c @@ -126,7 +126,7 @@ local_bus_init(void) sys_info_t sysinfo; get_sys_info(&sysinfo); - clkdiv = (lbc->lcrr & 0x0f) * 2; + clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2; lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; gur->lbiuiplldcr1 = 0x00078080; diff --git a/board/socrates/socrates.c b/board/socrates/socrates.c index d83dc7d6a3f..df9696e69a3 100644 --- a/board/socrates/socrates.c +++ b/board/socrates/socrates.c @@ -156,7 +156,7 @@ void local_bus_init (void) uint lcrr = CONFIG_SYS_LBC_LCRR; get_sys_info (&sysinfo); - clkdiv = lbc->lcrr & 0x0f; + clkdiv = lbc->lcrr & LCRR_CLKDIV; lbc_mhz = sysinfo.freqSystemBus / 1000000 / clkdiv; /* Disable PLL bypass for Local Bus Clock >= 66 MHz */ diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c index 73f1d01bdf2..cda8208eec2 100644 --- a/board/tqc/tqm85xx/tqm85xx.c +++ b/board/tqc/tqm85xx/tqm85xx.c @@ -361,7 +361,7 @@ uint get_lbc_clock (void) { volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); sys_info_t sys_info; - ulong clkdiv = lbc->lcrr & 0x0f; + ulong clkdiv = lbc->lcrr & LCRR_CLKDIV; get_sys_info (&sys_info); diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c index 943602f923e..59a9ac8d923 100644 --- a/cpu/mpc85xx/cpu.c +++ b/cpu/mpc85xx/cpu.c @@ -174,7 +174,7 @@ int checkcpu (void) lcrr = lbc->lcrr; } #endif - clkdiv = lcrr & 0x0f; + clkdiv = lcrr & LCRR_CLKDIV; if (clkdiv == 2 || clkdiv == 4 || clkdiv == 8) { #if defined(CONFIG_MPC8548) || defined(CONFIG_MPC8544) || \ defined(CONFIG_MPC8572) || defined(CONFIG_MPC8536) diff --git a/cpu/mpc86xx/cpu.c b/cpu/mpc86xx/cpu.c index 4cace984d91..0ff76e3f7ed 100644 --- a/cpu/mpc86xx/cpu.c +++ b/cpu/mpc86xx/cpu.c @@ -110,7 +110,7 @@ checkcpu(void) lcrr = lbc->lcrr; } #endif - clkdiv = lcrr & 0x0f; + clkdiv = lcrr & LCRR_CLKDIV; if (clkdiv == 2 || clkdiv == 4 || clkdiv == 8) { printf("LBC:%4lu MHz\n", sysinfo.freqSystemBus / 1000000 / clkdiv); diff --git a/include/asm-ppc/fsl_lbc.h b/include/asm-ppc/fsl_lbc.h index 51fc5c13b0b..e492c62a8bc 100644 --- a/include/asm-ppc/fsl_lbc.h +++ b/include/asm-ppc/fsl_lbc.h @@ -300,7 +300,10 @@ #define LCRR_EADC_2 0x00020000 #define LCRR_EADC_3 0x00030000 #define LCRR_EADC_4 0x00000000 -#define LCRR_CLKDIV 0x0000000F +/* CLKDIV is five bits only on 8536, 8572, and 8610, so far, but the fifth bit + * should always be zero on older parts that have a four bit CLKDIV. + */ +#define LCRR_CLKDIV 0x0000001F #define LCRR_CLKDIV_SHIFT 0 #define LCRR_CLKDIV_2 0x00000002 #define LCRR_CLKDIV_4 0x00000004 -- cgit v1.3.1 From ada591d2a0ecff5f9bc5ed1ebf310f439c3d0a28 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Wed, 3 Dec 2008 15:16:37 -0800 Subject: mpc8[56]xx: Put localbus clock in sysinfo and gd Currently MPC85xx and MPC86xx boards just calculate the localbus frequency and print it out, but don't save it. This changes where its calculated and stored to be more consistent with the CPU, CCB, TB, and DDR frequencies and the MPC83xx localbus clock. The localbus frequency is added to sysinfo and calculated when sysinfo is set up, in cpu/mpc8[56]xx/speed.c, the same as the other frequencies are. get_clocks() copies the frequency into the global data, as the other frequencies are, into a new field that is only enabled for MPC85xx and MPC86xx. checkcpu() in cpu/mpc8[56]xx/cpu.c will print out the local bus frequency from sysinfo, like the other frequencies, instead of calculating it on the spot. Signed-off-by: Trent Piepho Acked-by: Kumar Gala Acked-by: Jon Loeliger --- cpu/mpc85xx/cpu.c | 31 +++++-------------------------- cpu/mpc85xx/speed.c | 27 +++++++++++++++++++++++++++ cpu/mpc86xx/cpu.c | 22 ++++------------------ cpu/mpc86xx/speed.c | 19 +++++++++++++++++++ include/asm-ppc/global_data.h | 3 +++ include/e500.h | 1 + include/mpc86xx.h | 1 + 7 files changed, 60 insertions(+), 44 deletions(-) (limited to 'include/asm-ppc') diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c index 89800b88448..15ba7f1c5ed 100644 --- a/cpu/mpc85xx/cpu.c +++ b/cpu/mpc85xx/cpu.c @@ -77,8 +77,6 @@ struct cpu_type *identify_cpu(u32 ver) int checkcpu (void) { sys_info_t sysinfo; - uint lcrr; /* local bus clock ratio register */ - uint clkdiv; /* clock divider portion of lcrr */ uint pvr, svr; uint fam; uint ver; @@ -165,30 +163,11 @@ int checkcpu (void) break; } -#if defined(CONFIG_SYS_LBC_LCRR) - lcrr = CONFIG_SYS_LBC_LCRR; -#else - { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); - - lcrr = lbc->lcrr; - } -#endif - clkdiv = lcrr & LCRR_CLKDIV; - if (clkdiv == 2 || clkdiv == 4 || clkdiv == 8) { -#if !defined(CONFIG_MPC8540) && !defined(CONFIG_MPC8541) && \ - !defined(CONFIG_MPC8555) && !defined(CONFIG_MPC8560) - /* - * Yes, the entire PQ38 family use the same - * bit-representation for twice the clock divider values. - */ - clkdiv *= 2; -#endif - printf("LBC:%-4s MHz\n", - strmhz(buf1, sysinfo.freqSystemBus / clkdiv)); - } else { - printf("LBC: unknown (lcrr: 0x%08x)\n", lcrr); - } + if (sysinfo.freqLocalBus > LCRR_CLKDIV) + printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus)); + else + printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n", + sysinfo.freqLocalBus); #ifdef CONFIG_CPM2 printf("CPM: %s MHz\n", strmhz(buf1, sysinfo.freqSystemBus)); diff --git a/cpu/mpc85xx/speed.c b/cpu/mpc85xx/speed.c index 1e0f4838bf8..0d55228b641 100644 --- a/cpu/mpc85xx/speed.c +++ b/cpu/mpc85xx/speed.c @@ -28,6 +28,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -37,6 +38,7 @@ void get_sys_info (sys_info_t * sysInfo) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); uint plat_ratio,e500_ratio,half_freqSystemBus; + uint lcrr_div; plat_ratio = (gur->porpllsr) & 0x0000003e; plat_ratio >>= 1; @@ -60,6 +62,30 @@ void get_sys_info (sys_info_t * sysInfo) sysInfo->freqDDRBus = ddr_ratio * CONFIG_DDR_CLK_FREQ; } #endif + +#if defined(CONFIG_SYS_LBC_LCRR) + /* We will program LCRR to this value later */ + lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV; +#else + { + volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + lcrr_div = in_be32(&lbc->lcrr) & LCRR_CLKDIV; + } +#endif + if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) { +#if !defined(CONFIG_MPC8540) && !defined(CONFIG_MPC8541) && \ + !defined(CONFIG_MPC8555) && !defined(CONFIG_MPC8560) + /* + * Yes, the entire PQ38 family use the same + * bit-representation for twice the clock divider values. + */ + lcrr_div *= 2; +#endif + sysInfo->freqLocalBus = sysInfo->freqSystemBus / lcrr_div; + } else { + /* In case anyone cares what the unknown value is */ + sysInfo->freqLocalBus = lcrr_div; + } } @@ -82,6 +108,7 @@ int get_clocks (void) gd->cpu_clk = sys_info.freqProcessor; gd->bus_clk = sys_info.freqSystemBus; gd->mem_clk = sys_info.freqDDRBus; + gd->lbc_clk = sys_info.freqLocalBus; /* * The base clock for I2C depends on the actual SOC. Unfortunately, diff --git a/cpu/mpc86xx/cpu.c b/cpu/mpc86xx/cpu.c index a179fb3d01f..35680238d2e 100644 --- a/cpu/mpc86xx/cpu.c +++ b/cpu/mpc86xx/cpu.c @@ -39,8 +39,6 @@ checkcpu(void) uint pvr, svr; uint ver; uint major, minor; - uint lcrr; /* local bus clock ratio register */ - uint clkdiv; /* clock divider portion of lcrr */ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile ccsr_gur_t *gur = &immap->im_gur; @@ -100,23 +98,11 @@ checkcpu(void) printf("MPX:%4lu MHz, ", sysinfo.freqSystemBus / 1000000); printf("DDR:%4lu MHz, ", sysinfo.freqSystemBus / 2000000); -#if defined(CONFIG_SYS_LBC_LCRR) - lcrr = CONFIG_SYS_LBC_LCRR; -#else - { - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile ccsr_lbc_t *lbc = &immap->im_lbc; - - lcrr = lbc->lcrr; - } -#endif - clkdiv = lcrr & LCRR_CLKDIV; - if (clkdiv == 2 || clkdiv == 4 || clkdiv == 8) { - clkdiv *= 2; - printf("LBC:%4lu MHz\n", - sysinfo.freqSystemBus / 1000000 / clkdiv); + if (sysinfo.freqLocalBus > LCRR_CLKDIV) { + printf("LBC:%4lu MHz\n", sysinfo.freqLocalBus / 1000000); } else { - printf(" LBC: unknown (lcrr: 0x%08x)\n", lcrr); + printf("LBC: unknown (LCRR[CLKDIV] = 0x%02x)\n", + sysinfo.freqLocalBus); } puts(" L2: "); diff --git a/cpu/mpc86xx/speed.c b/cpu/mpc86xx/speed.c index 415ac9db890..64a3479d7e5 100644 --- a/cpu/mpc86xx/speed.c +++ b/cpu/mpc86xx/speed.c @@ -28,6 +28,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -39,6 +40,7 @@ void get_sys_info(sys_info_t *sysInfo) volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile ccsr_gur_t *gur = &immap->im_gur; uint plat_ratio, e600_ratio; + uint lcrr_div; plat_ratio = (gur->porpllsr) & 0x0000003e; plat_ratio >>= 1; @@ -90,6 +92,22 @@ void get_sys_info(sys_info_t *sysInfo) sysInfo->freqProcessor = e600_ratio + sysInfo->freqSystemBus; break; } + +#if defined(CONFIG_SYS_LBC_LCRR) + /* We will program LCRR to this value later */ + lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV; +#else + { + volatile ccsr_lbc_t *lbc = &immap->im_lbc; + lcrr_div = in_be32(&lbc->lcrr) & LCRR_CLKDIV; + } +#endif + if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) { + sysInfo->freqLocalBus = sysInfo->freqSystemBus / (lcrr_div * 2); + } else { + /* In case anyone cares what the unknown value is */ + sysInfo->freqLocalBus = lcrr_div; + } } @@ -105,6 +123,7 @@ int get_clocks(void) get_sys_info(&sys_info); gd->cpu_clk = sys_info.freqProcessor; gd->bus_clk = sys_info.freqSystemBus; + gd->lbc_clk = sys_info.freqLocalBus; /* * The base clock for I2C depends on the actual SOC. Unfortunately, diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h index aade097fa4e..2bb50b47f51 100644 --- a/include/asm-ppc/global_data.h +++ b/include/asm-ppc/global_data.h @@ -89,6 +89,9 @@ typedef struct global_data { #if defined(CONFIG_MPC837X) || defined(CONFIG_MPC8536) u32 sdhc_clk; #endif +#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) + u32 lbc_clk; +#endif /* CONFIG_MPC85xx || CONFIG_MPC86xx */ #if defined(CONFIG_MPC83XX) || defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) u32 i2c1_clk; u32 i2c2_clk; diff --git a/include/e500.h b/include/e500.h index 1971eee291a..9d3c8417c01 100644 --- a/include/e500.h +++ b/include/e500.h @@ -13,6 +13,7 @@ typedef struct unsigned long freqProcessor; unsigned long freqSystemBus; unsigned long freqDDRBus; + unsigned long freqLocalBus; } MPC85xx_SYS_INFO; #endif /* _ASMLANGUAGE */ diff --git a/include/mpc86xx.h b/include/mpc86xx.h index f119d5bb15f..a6fdea352fd 100644 --- a/include/mpc86xx.h +++ b/include/mpc86xx.h @@ -84,6 +84,7 @@ typedef struct { unsigned long freqProcessor; unsigned long freqSystemBus; + unsigned long freqLocalBus; } MPC86xx_SYS_INFO; #define l1icache_enable icache_enable -- cgit v1.3.1