From a484b00b86e72ac6da6ee4fce13dbc6b256672fe Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sat, 21 Mar 2009 21:08:00 +0100 Subject: at91sam9/at91cap: move common led management to cpu Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- include/configs/at91cap9adk.h | 6 ++++++ include/configs/at91sam9260ek.h | 5 +++++ include/configs/at91sam9261ek.h | 6 ++++++ include/configs/at91sam9263ek.h | 6 ++++++ include/configs/at91sam9rlek.h | 6 ++++++ 5 files changed, 29 insertions(+) (limited to 'include/configs') diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h index 01da99b82c8..d8e6a29f6e6 100644 --- a/include/configs/at91cap9adk.h +++ b/include/configs/at91cap9adk.h @@ -70,6 +70,12 @@ #define CONFIG_ATMEL_LCD_BGR555 1 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 +/* LED */ +#define CONFIG_AT91_LED +#define CONFIG_RED_LED AT91_PIN_PC29 /* this is the power led */ +#define CONFIG_GREEN_LED AT91_PIN_PA10 /* this is the user1 led */ +#define CONFIG_YELLOW_LED AT91_PIN_PA11 /* this is the user1 led */ + #define CONFIG_BOOTDELAY 3 /* diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index 2f1a41f646f..e348833346e 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -58,6 +58,11 @@ #undef CONFIG_USART2 #define CONFIG_USART3 1 /* USART 3 is DBGU */ +/* LED */ +#define CONFIG_AT91_LED +#define CONFIG_RED_LED AT91_PIN_PA9 /* this is the power led */ +#define CONFIG_GREEN_LED AT91_PIN_PA6 /* this is the user led */ + #define CONFIG_BOOTDELAY 3 /* diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index ebecfa4099e..b119d96d534 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -69,6 +69,12 @@ #define CONFIG_ATMEL_LCD_BGR555 1 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 +/* LED */ +#define CONFIG_AT91_LED +#define CONFIG_RED_LED AT91_PIN_PA23 /* this is the power led */ +#define CONFIG_GREEN_LED AT91_PIN_PA13 /* this is the user1 led */ +#define CONFIG_YELLOW_LED AT91_PIN_PA14 /* this is the user2 led */ + #define CONFIG_BOOTDELAY 3 /* diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index 09b871a5e95..979d7a38c97 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -70,6 +70,12 @@ #define CONFIG_ATMEL_LCD_BGR555 1 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 +/* LED */ +#define CONFIG_AT91_LED +#define CONFIG_RED_LED AT91_PIN_PB7 /* this is the power led */ +#define CONFIG_GREEN_LED AT91_PIN_PB8 /* this is the user1 led */ +#define CONFIG_YELLOW_LED AT91_PIN_PC29 /* this is the user2 led */ + #define CONFIG_BOOTDELAY 3 /* diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index 5bef1fe975a..5d837a07aff 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -69,6 +69,12 @@ #define CONFIG_ATMEL_LCD_RGB565 1 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 +/* LED */ +#define CONFIG_AT91_LED +#define CONFIG_RED_LED AT91_PIN_PD14 /* this is the power led */ +#define CONFIG_GREEN_LED AT91_PIN_PD15 /* this is the user1 led */ +#define CONFIG_YELLOW_LED AT91_PIN_PD16 /* this is the user2 led */ + #define CONFIG_BOOTDELAY 3 /* -- cgit v1.3.1 From 74c076d6c33d6d42ab065541a38383587879e7b7 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sun, 22 Mar 2009 10:22:34 +0100 Subject: at91sam9/at91cap: move nand drivers to drivers/mtd/nand Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- board/afeb9260/Makefile | 1 - board/afeb9260/afeb9260.c | 4 +- board/afeb9260/nand.c | 78 ------------------------------- board/atmel/at91cap9adk/Makefile | 1 - board/atmel/at91cap9adk/at91cap9adk.c | 2 +- board/atmel/at91cap9adk/nand.c | 72 ---------------------------- board/atmel/at91sam9260ek/Makefile | 1 - board/atmel/at91sam9260ek/at91sam9260ek.c | 4 +- board/atmel/at91sam9260ek/nand.c | 78 ------------------------------- board/atmel/at91sam9261ek/Makefile | 1 - board/atmel/at91sam9261ek/at91sam9261ek.c | 4 +- board/atmel/at91sam9261ek/nand.c | 78 ------------------------------- board/atmel/at91sam9263ek/Makefile | 1 - board/atmel/at91sam9263ek/at91sam9263ek.c | 4 +- board/atmel/at91sam9263ek/nand.c | 78 ------------------------------- board/atmel/at91sam9rlek/Makefile | 1 - board/atmel/at91sam9rlek/at91sam9rlek.c | 4 +- board/atmel/at91sam9rlek/nand.c | 78 ------------------------------- drivers/mtd/nand/Makefile | 1 + drivers/mtd/nand/atmel_nand.c | 78 +++++++++++++++++++++++++++++++ include/configs/afeb9260.h | 9 ++++ include/configs/at91cap9adk.h | 8 ++++ include/configs/at91sam9260ek.h | 9 ++++ include/configs/at91sam9261ek.h | 9 ++++ include/configs/at91sam9263ek.h | 9 ++++ include/configs/at91sam9rlek.h | 9 ++++ 26 files changed, 143 insertions(+), 479 deletions(-) delete mode 100644 board/afeb9260/nand.c delete mode 100644 board/atmel/at91cap9adk/nand.c delete mode 100644 board/atmel/at91sam9260ek/nand.c delete mode 100644 board/atmel/at91sam9261ek/nand.c delete mode 100644 board/atmel/at91sam9263ek/nand.c delete mode 100644 board/atmel/at91sam9rlek/nand.c create mode 100644 drivers/mtd/nand/atmel_nand.c (limited to 'include/configs') diff --git a/board/afeb9260/Makefile b/board/afeb9260/Makefile index 60c4304c1cf..73187fb70d8 100644 --- a/board/afeb9260/Makefile +++ b/board/afeb9260/Makefile @@ -31,7 +31,6 @@ LIB = $(obj)lib$(BOARD).a COBJS-y += afeb9260.o COBJS-y += partition.o -COBJS-$(CONFIG_CMD_NAND) += nand.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/afeb9260/afeb9260.c b/board/afeb9260/afeb9260.c index ba60861f1ea..024db2bbe0f 100644 --- a/board/afeb9260/afeb9260.c +++ b/board/afeb9260/afeb9260.c @@ -72,10 +72,10 @@ static void afeb9260_nand_hw_init(void) at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC); /* Configure RDY/BSY */ - at91_set_gpio_input(AT91_PIN_PC13, 1); + at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); /* Enable NandFlash */ - at91_set_gpio_output(AT91_PIN_PC14, 1); + at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); } #ifdef CONFIG_MACB diff --git a/board/afeb9260/nand.c b/board/afeb9260/nand.c deleted file mode 100644 index c5ac634aab8..00000000000 --- a/board/afeb9260/nand.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop - * Lead Tech Design - * - * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include - -#include - -/* - * hardware specific access to control-lines - */ -#define MASK_ALE (1 << 21) /* our ALE is AD21 */ -#define MASK_CLE (1 << 22) /* our CLE is AD22 */ - -static void at91sam9260ek_nand_hwcontrol(struct mtd_info *mtd, - int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd->priv; - - if (ctrl & NAND_CTRL_CHANGE) { - ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; - IO_ADDR_W &= ~(MASK_ALE | MASK_CLE); - - if (ctrl & NAND_CLE) - IO_ADDR_W |= MASK_CLE; - if (ctrl & NAND_ALE) - IO_ADDR_W |= MASK_ALE; - - at91_set_gpio_value(AT91_PIN_PC14, !(ctrl & NAND_NCE)); - this->IO_ADDR_W = (void *) IO_ADDR_W; - } - - if (cmd != NAND_CMD_NONE) - writeb(cmd, this->IO_ADDR_W); -} - -static int at91sam9260ek_nand_ready(struct mtd_info *mtd) -{ - return at91_get_gpio_value(AT91_PIN_PC13); -} - -int board_nand_init(struct nand_chip *nand) -{ - nand->ecc.mode = NAND_ECC_SOFT; -#ifdef CONFIG_SYS_NAND_DBW_16 - nand->options = NAND_BUSWIDTH_16; -#endif - nand->cmd_ctrl = at91sam9260ek_nand_hwcontrol; - nand->dev_ready = at91sam9260ek_nand_ready; - nand->chip_delay = 20; - - return 0; -} diff --git a/board/atmel/at91cap9adk/Makefile b/board/atmel/at91cap9adk/Makefile index d2536491b31..2496f9bd48a 100644 --- a/board/atmel/at91cap9adk/Makefile +++ b/board/atmel/at91cap9adk/Makefile @@ -32,7 +32,6 @@ LIB = $(obj)lib$(BOARD).a COBJS-y += at91cap9adk.o COBJS-y += led.o COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o -COBJS-$(CONFIG_CMD_NAND) += nand.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/atmel/at91cap9adk/at91cap9adk.c b/board/atmel/at91cap9adk/at91cap9adk.c index 46a4fce5d2c..e8025e7aed5 100644 --- a/board/atmel/at91cap9adk/at91cap9adk.c +++ b/board/atmel/at91cap9adk/at91cap9adk.c @@ -133,7 +133,7 @@ static void at91cap9_nand_hw_init(void) /* RDY/BSY is not connected */ /* Enable NandFlash */ - at91_set_gpio_output(AT91_PIN_PD15, 1); + at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); } #endif diff --git a/board/atmel/at91cap9adk/nand.c b/board/atmel/at91cap9adk/nand.c deleted file mode 100644 index cc2263b023a..00000000000 --- a/board/atmel/at91cap9adk/nand.c +++ /dev/null @@ -1,72 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop - * Lead Tech Design - * - * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include - -#include - -/* - * hardware specific access to control-lines - */ -#define MASK_ALE (1 << 21) /* our ALE is AD21 */ -#define MASK_CLE (1 << 22) /* our CLE is AD22 */ - -static void at91cap9adk_nand_hwcontrol(struct mtd_info *mtd, - int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd->priv; - - if (ctrl & NAND_CTRL_CHANGE) { - ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; - IO_ADDR_W &= ~(MASK_ALE | MASK_CLE); - - if (ctrl & NAND_CLE) - IO_ADDR_W |= MASK_CLE; - if (ctrl & NAND_ALE) - IO_ADDR_W |= MASK_ALE; - - at91_set_gpio_value(AT91_PIN_PD15, !(ctrl & NAND_NCE)); - this->IO_ADDR_W = (void *) IO_ADDR_W; - } - - if (cmd != NAND_CMD_NONE) - writeb(cmd, this->IO_ADDR_W); -} - -int board_nand_init(struct nand_chip *nand) -{ - nand->ecc.mode = NAND_ECC_SOFT; -#ifdef CONFIG_SYS_NAND_DBW_16 - nand->options = NAND_BUSWIDTH_16; -#endif - nand->cmd_ctrl = at91cap9adk_nand_hwcontrol; - nand->chip_delay = 20; - - return 0; -} diff --git a/board/atmel/at91sam9260ek/Makefile b/board/atmel/at91sam9260ek/Makefile index 2e654341159..aaa324062a9 100644 --- a/board/atmel/at91sam9260ek/Makefile +++ b/board/atmel/at91sam9260ek/Makefile @@ -32,7 +32,6 @@ LIB = $(obj)lib$(BOARD).a COBJS-y += at91sam9260ek.o COBJS-y += led.o COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o -COBJS-$(CONFIG_CMD_NAND) += nand.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c index d89f2475c6d..ae00c5347ef 100644 --- a/board/atmel/at91sam9260ek/at91sam9260ek.c +++ b/board/atmel/at91sam9260ek/at91sam9260ek.c @@ -76,10 +76,10 @@ static void at91sam9260ek_nand_hw_init(void) at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC); /* Configure RDY/BSY */ - at91_set_gpio_input(AT91_PIN_PC13, 1); + at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); /* Enable NandFlash */ - at91_set_gpio_output(AT91_PIN_PC14, 1); + at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); } #endif diff --git a/board/atmel/at91sam9260ek/nand.c b/board/atmel/at91sam9260ek/nand.c deleted file mode 100644 index c5ac634aab8..00000000000 --- a/board/atmel/at91sam9260ek/nand.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop - * Lead Tech Design - * - * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include - -#include - -/* - * hardware specific access to control-lines - */ -#define MASK_ALE (1 << 21) /* our ALE is AD21 */ -#define MASK_CLE (1 << 22) /* our CLE is AD22 */ - -static void at91sam9260ek_nand_hwcontrol(struct mtd_info *mtd, - int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd->priv; - - if (ctrl & NAND_CTRL_CHANGE) { - ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; - IO_ADDR_W &= ~(MASK_ALE | MASK_CLE); - - if (ctrl & NAND_CLE) - IO_ADDR_W |= MASK_CLE; - if (ctrl & NAND_ALE) - IO_ADDR_W |= MASK_ALE; - - at91_set_gpio_value(AT91_PIN_PC14, !(ctrl & NAND_NCE)); - this->IO_ADDR_W = (void *) IO_ADDR_W; - } - - if (cmd != NAND_CMD_NONE) - writeb(cmd, this->IO_ADDR_W); -} - -static int at91sam9260ek_nand_ready(struct mtd_info *mtd) -{ - return at91_get_gpio_value(AT91_PIN_PC13); -} - -int board_nand_init(struct nand_chip *nand) -{ - nand->ecc.mode = NAND_ECC_SOFT; -#ifdef CONFIG_SYS_NAND_DBW_16 - nand->options = NAND_BUSWIDTH_16; -#endif - nand->cmd_ctrl = at91sam9260ek_nand_hwcontrol; - nand->dev_ready = at91sam9260ek_nand_ready; - nand->chip_delay = 20; - - return 0; -} diff --git a/board/atmel/at91sam9261ek/Makefile b/board/atmel/at91sam9261ek/Makefile index edeb6482116..d9b3a79536f 100644 --- a/board/atmel/at91sam9261ek/Makefile +++ b/board/atmel/at91sam9261ek/Makefile @@ -32,7 +32,6 @@ LIB = $(obj)lib$(BOARD).a COBJS-y += at91sam9261ek.o COBJS-y += led.o COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o -COBJS-$(CONFIG_CMD_NAND) += nand.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c index d8f006c54a9..bae4092bb6d 100644 --- a/board/atmel/at91sam9261ek/at91sam9261ek.c +++ b/board/atmel/at91sam9261ek/at91sam9261ek.c @@ -76,10 +76,10 @@ static void at91sam9261ek_nand_hw_init(void) at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOC); /* Configure RDY/BSY */ - at91_set_gpio_input(AT91_PIN_PC15, 1); + at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); /* Enable NandFlash */ - at91_set_gpio_output(AT91_PIN_PC14, 1); + at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); at91_set_A_periph(AT91_PIN_PC0, 0); /* NANDOE */ at91_set_A_periph(AT91_PIN_PC1, 0); /* NANDWE */ diff --git a/board/atmel/at91sam9261ek/nand.c b/board/atmel/at91sam9261ek/nand.c deleted file mode 100644 index 06395ee215c..00000000000 --- a/board/atmel/at91sam9261ek/nand.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop - * Lead Tech Design - * - * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include - -#include - -/* - * hardware specific access to control-lines - */ -#define MASK_ALE (1 << 22) /* our ALE is AD22 */ -#define MASK_CLE (1 << 21) /* our CLE is AD21 */ - -static void at91sam9261ek_nand_hwcontrol(struct mtd_info *mtd, - int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd->priv; - - if (ctrl & NAND_CTRL_CHANGE) { - ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; - IO_ADDR_W &= ~(MASK_ALE | MASK_CLE); - - if (ctrl & NAND_CLE) - IO_ADDR_W |= MASK_CLE; - if (ctrl & NAND_ALE) - IO_ADDR_W |= MASK_ALE; - - at91_set_gpio_value(AT91_PIN_PC14, !(ctrl & NAND_NCE)); - this->IO_ADDR_W = (void *) IO_ADDR_W; - } - - if (cmd != NAND_CMD_NONE) - writeb(cmd, this->IO_ADDR_W); -} - -static int at91sam9261ek_nand_ready(struct mtd_info *mtd) -{ - return at91_get_gpio_value(AT91_PIN_PC15); -} - -int board_nand_init(struct nand_chip *nand) -{ - nand->ecc.mode = NAND_ECC_SOFT; -#ifdef CONFIG_SYS_NAND_DBW_16 - nand->options = NAND_BUSWIDTH_16; -#endif - nand->cmd_ctrl = at91sam9261ek_nand_hwcontrol; - nand->dev_ready = at91sam9261ek_nand_ready; - nand->chip_delay = 20; - - return 0; -} diff --git a/board/atmel/at91sam9263ek/Makefile b/board/atmel/at91sam9263ek/Makefile index d0d42726ea2..013ed215f9f 100644 --- a/board/atmel/at91sam9263ek/Makefile +++ b/board/atmel/at91sam9263ek/Makefile @@ -32,7 +32,6 @@ LIB = $(obj)lib$(BOARD).a COBJS-y += at91sam9263ek.o COBJS-y += led.o COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o -COBJS-$(CONFIG_CMD_NAND) += nand.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c index 9110e9e6ac2..1d5284592eb 100644 --- a/board/atmel/at91sam9263ek/at91sam9263ek.c +++ b/board/atmel/at91sam9263ek/at91sam9263ek.c @@ -80,10 +80,10 @@ static void at91sam9263ek_nand_hw_init(void) 1 << AT91SAM9263_ID_PIOCDE); /* Configure RDY/BSY */ - at91_set_gpio_input(AT91_PIN_PA22, 1); + at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); /* Enable NandFlash */ - at91_set_gpio_output(AT91_PIN_PD15, 1); + at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); } #endif diff --git a/board/atmel/at91sam9263ek/nand.c b/board/atmel/at91sam9263ek/nand.c deleted file mode 100644 index 3c247f6e5f3..00000000000 --- a/board/atmel/at91sam9263ek/nand.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop - * Lead Tech Design - * - * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include - -#include - -/* - * hardware specific access to control-lines - */ -#define MASK_ALE (1 << 21) /* our ALE is AD21 */ -#define MASK_CLE (1 << 22) /* our CLE is AD22 */ - -static void at91sam9263ek_nand_hwcontrol(struct mtd_info *mtd, - int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd->priv; - - if (ctrl & NAND_CTRL_CHANGE) { - ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; - IO_ADDR_W &= ~(MASK_ALE | MASK_CLE); - - if (ctrl & NAND_CLE) - IO_ADDR_W |= MASK_CLE; - if (ctrl & NAND_ALE) - IO_ADDR_W |= MASK_ALE; - - at91_set_gpio_value(AT91_PIN_PD15, !(ctrl & NAND_NCE)); - this->IO_ADDR_W = (void *) IO_ADDR_W; - } - - if (cmd != NAND_CMD_NONE) - writeb(cmd, this->IO_ADDR_W); -} - -static int at91sam9263ek_nand_ready(struct mtd_info *mtd) -{ - return at91_get_gpio_value(AT91_PIN_PA22); -} - -int board_nand_init(struct nand_chip *nand) -{ - nand->ecc.mode = NAND_ECC_SOFT; -#ifdef CONFIG_SYS_NAND_DBW_16 - nand->options = NAND_BUSWIDTH_16; -#endif - nand->cmd_ctrl = at91sam9263ek_nand_hwcontrol; - nand->dev_ready = at91sam9263ek_nand_ready; - nand->chip_delay = 20; - - return 0; -} diff --git a/board/atmel/at91sam9rlek/Makefile b/board/atmel/at91sam9rlek/Makefile index 3dbee27cfb7..92a5a2b9883 100644 --- a/board/atmel/at91sam9rlek/Makefile +++ b/board/atmel/at91sam9rlek/Makefile @@ -32,7 +32,6 @@ LIB = $(obj)lib$(BOARD).a COBJS-y += at91sam9rlek.o COBJS-y += led.o COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o -COBJS-$(CONFIG_CMD_NAND) += nand.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/atmel/at91sam9rlek/at91sam9rlek.c b/board/atmel/at91sam9rlek/at91sam9rlek.c index ce10cdf0746..908b9c801ba 100644 --- a/board/atmel/at91sam9rlek/at91sam9rlek.c +++ b/board/atmel/at91sam9rlek/at91sam9rlek.c @@ -76,10 +76,10 @@ static void at91sam9rlek_nand_hw_init(void) at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_PIOD); /* Configure RDY/BSY */ - at91_set_gpio_input(AT91_PIN_PD17, 1); + at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); /* Enable NandFlash */ - at91_set_gpio_output(AT91_PIN_PB6, 1); + at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); at91_set_A_periph(AT91_PIN_PB4, 0); /* NANDOE */ at91_set_A_periph(AT91_PIN_PB5, 0); /* NANDWE */ diff --git a/board/atmel/at91sam9rlek/nand.c b/board/atmel/at91sam9rlek/nand.c deleted file mode 100644 index 625f6ec9bc3..00000000000 --- a/board/atmel/at91sam9rlek/nand.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop - * Lead Tech Design - * - * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include - -#include - -/* - * hardware specific access to control-lines - */ -#define MASK_ALE (1 << 21) /* our ALE is AD21 */ -#define MASK_CLE (1 << 22) /* our CLE is AD22 */ - -static void at91sam9rlek_nand_hwcontrol(struct mtd_info *mtd, - int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd->priv; - - if (ctrl & NAND_CTRL_CHANGE) { - ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; - IO_ADDR_W &= ~(MASK_ALE | MASK_CLE); - - if (ctrl & NAND_CLE) - IO_ADDR_W |= MASK_CLE; - if (ctrl & NAND_ALE) - IO_ADDR_W |= MASK_ALE; - - at91_set_gpio_value(AT91_PIN_PB6, !(ctrl & NAND_NCE)); - this->IO_ADDR_W = (void *) IO_ADDR_W; - } - - if (cmd != NAND_CMD_NONE) - writeb(cmd, this->IO_ADDR_W); -} - -static int at91sam9rlek_nand_ready(struct mtd_info *mtd) -{ - return at91_get_gpio_value(AT91_PIN_PD17); -} - -int board_nand_init(struct nand_chip *nand) -{ - nand->ecc.mode = NAND_ECC_SOFT; -#ifdef CONFIG_SYS_NAND_DBW_16 - nand->options = NAND_BUSWIDTH_16; -#endif - nand->cmd_ctrl = at91sam9rlek_nand_hwcontrol; - nand->dev_ready = at91sam9rlek_nand_ready; - nand->chip_delay = 20; - - return 0; -} diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 5974d7768d4..03b0028e7c6 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -35,6 +35,7 @@ COBJS-y += nand_ids.o COBJS-y += nand_util.o endif +COBJS-$(CONFIG_NAND_ATMEL) += atmel_nand.o COBJS-$(CONFIG_DRIVER_NAND_BFIN) += bfin_nand.o COBJS-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o COBJS-$(CONFIG_NAND_FSL_UPM) += fsl_upm.o diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c new file mode 100644 index 00000000000..40002be4175 --- /dev/null +++ b/drivers/mtd/nand/atmel_nand.c @@ -0,0 +1,78 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop + * Lead Tech Design + * + * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include + +#include + +static void at91_nand_hwcontrol(struct mtd_info *mtd, + int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + + if (ctrl & NAND_CTRL_CHANGE) { + ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; + IO_ADDR_W &= ~(CONFIG_SYS_NAND_MASK_ALE + | CONFIG_SYS_NAND_MASK_CLE); + + if (ctrl & NAND_CLE) + IO_ADDR_W |= CONFIG_SYS_NAND_MASK_CLE; + if (ctrl & NAND_ALE) + IO_ADDR_W |= CONFIG_SYS_NAND_MASK_ALE; + + at91_set_gpio_value(CONFIG_SYS_NAND_ENABLE_PIN, + !(ctrl & NAND_NCE)); + this->IO_ADDR_W = (void *) IO_ADDR_W; + } + + if (cmd != NAND_CMD_NONE) + writeb(cmd, this->IO_ADDR_W); +} + +#ifdef CONFIG_SYS_NAND_READY_PIN +static int at91_nand_ready(struct mtd_info *mtd) +{ + return at91_get_gpio_value(CONFIG_SYS_NAND_READY_PIN); +} +#endif + +int board_nand_init(struct nand_chip *nand) +{ + nand->ecc.mode = NAND_ECC_SOFT; +#ifdef CONFIG_SYS_NAND_DBW_16 + nand->options = NAND_BUSWIDTH_16; +#endif + nand->cmd_ctrl = at91_nand_hwcontrol; +#ifdef CONFIG_SYS_NAND_READY_PIN + nand->dev_ready = at91_nand_ready; +#endif + nand->chip_delay = 20; + + return 0; +} diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h index 9eed3423cc4..33a67ca8304 100644 --- a/include/configs/afeb9260.h +++ b/include/configs/afeb9260.h @@ -97,9 +97,18 @@ #define DATAFLASH_TCHS (0x1 << 24) /* NAND flash */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_ATMEL #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 #define CONFIG_SYS_NAND_DBW_8 1 +/* our ALE is AD21 */ +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +/* our CLE is AD22 */ +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 +#endif /* NOR flash - no real flash on this board */ #define CONFIG_SYS_NO_FLASH 1 diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h index d8e6a29f6e6..7e7f124b98e 100644 --- a/include/configs/at91cap9adk.h +++ b/include/configs/at91cap9adk.h @@ -122,8 +122,16 @@ #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 #define CONFIG_SYS_MAX_FLASH_SECT 256 #define CONFIG_SYS_MAX_FLASH_BANKS 1 +/* our ALE is AD21 */ +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +/* our CLE is AD22 */ +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15 +#endif /* NAND flash */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_ATMEL #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 #define CONFIG_SYS_NAND_DBW_8 1 diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index e348833346e..2661563627f 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -105,9 +105,18 @@ #define DATAFLASH_TCHS (0x1 << 24) /* NAND flash */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_ATMEL #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 #define CONFIG_SYS_NAND_DBW_8 1 +/* our ALE is AD21 */ +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +/* our CLE is AD22 */ +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 +#endif /* NOR flash - no real flash on this board */ #define CONFIG_SYS_NO_FLASH 1 diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index b119d96d534..752d7e9ccdd 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -117,9 +117,18 @@ #define DATAFLASH_TCHS (0x1 << 24) /* NAND flash */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_ATMEL #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 #define CONFIG_SYS_NAND_DBW_8 1 +/* our ALE is AD22 */ +#define CONFIG_SYS_NAND_MASK_ALE (1 << 22) +/* our CLE is AD21 */ +#define CONFIG_SYS_NAND_MASK_CLE (1 << 21) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC15 +#endif /* NOR flash - no real flash on this board */ #define CONFIG_SYS_NO_FLASH 1 diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index 979d7a38c97..dd500caf6c5 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -129,9 +129,18 @@ #endif /* NAND flash */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_ATMEL #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 #define CONFIG_SYS_NAND_DBW_8 1 +/* our ALE is AD21 */ +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +/* our CLE is AD22 */ +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA22 +#endif /* Ethernet */ #define CONFIG_MACB 1 diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index 5d837a07aff..7a4039c55aa 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -110,9 +110,18 @@ #define CONFIG_SYS_NO_FLASH 1 /* NAND flash */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_ATMEL #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 #define CONFIG_SYS_NAND_DBW_8 1 +/* our ALE is AD21 */ +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +/* our CLE is AD22 */ +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PB6 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD17 +#endif /* Ethernet - not present */ -- cgit v1.3.1 From df486b1fa3f750b153eac7daa0b3bf1f594e5098 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Sun, 22 Mar 2009 14:48:16 +0100 Subject: at91: Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC. AT91sam9g20 is an evolution of the at91sam9260 with a faster clock speed. The AT91SAM9G20-EK board is an updated revision of the AT91SAM9260-EK board. It is essentially the same, with a few minor differences. Here is the chip page on Atmel website: http://www.atmel.com/dyn/products/product_card.asp?part_id=4337 Signed-off-by: Justin Waters Signed-off-by: Nicolas Ferre Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- MAKEALL | 1 + Makefile | 14 ++++++++++++-- board/atmel/at91sam9260ek/at91sam9260ek.c | 5 +++++ cpu/arm926ejs/at91/Makefile | 5 +++++ cpu/arm926ejs/at91/usb.c | 4 ++-- doc/README.at91 | 2 +- drivers/net/macb.c | 4 ++-- include/asm-arm/arch-at91/hardware.h | 2 +- include/configs/at91sam9260ek.h | 23 ++++++++++++++++++----- 9 files changed, 47 insertions(+), 13 deletions(-) (limited to 'include/configs') diff --git a/MAKEALL b/MAKEALL index 32d95db2768..9741272c860 100755 --- a/MAKEALL +++ b/MAKEALL @@ -572,6 +572,7 @@ LIST_at91=" \ at91sam9260ek \ at91sam9261ek \ at91sam9263ek \ + at91sam9g20ek \ at91sam9rlek \ cmc_pu2 \ csb637 \ diff --git a/Makefile b/Makefile index 1d67eafb390..1cce381f611 100644 --- a/Makefile +++ b/Makefile @@ -2653,8 +2653,18 @@ at91cap9adk_config : unconfig at91sam9260ek_nandflash_config \ at91sam9260ek_dataflash_cs0_config \ at91sam9260ek_dataflash_cs1_config \ -at91sam9260ek_config : unconfig - @mkdir -p $(obj)include +at91sam9260ek_config \ +at91sam9g20ek_nandflash_config \ +at91sam9g20ek_dataflash_cs0_config \ +at91sam9g20ek_dataflash_cs1_config \ +at91sam9g20ek_config : unconfig + @mkdir -p $(obj)include + @if [ "$(findstring 9g20,$@)" ] ; then \ + echo "#define CONFIG_AT91SAM9G20EK 1" >>$(obj)include/config.h ; \ + $(XECHO) "... 9G20 Variant" ; \ + else \ + echo "#define CONFIG_AT91SAM9260EK 1" >>$(obj)include/config.h ; \ + fi; @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ $(XECHO) "... with environment variable in NAND FLASH" ; \ diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c index ae00c5347ef..6bd3b44f063 100644 --- a/board/atmel/at91sam9260ek/at91sam9260ek.c +++ b/board/atmel/at91sam9260ek/at91sam9260ek.c @@ -141,8 +141,13 @@ int board_init(void) /* Enable Ctrlc */ console_init_f(); +#ifdef CONFIG_AT91SAM9G20EK + /* arch number of AT91SAM9260EK-Board */ + gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK; +#else /* arch number of AT91SAM9260EK-Board */ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9260EK; +#endif /* adress of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; diff --git a/cpu/arm926ejs/at91/Makefile b/cpu/arm926ejs/at91/Makefile index db79c40d82a..f9e739c5c13 100644 --- a/cpu/arm926ejs/at91/Makefile +++ b/cpu/arm926ejs/at91/Makefile @@ -35,6 +35,11 @@ COBJS-$(CONFIG_MACB) += at91sam9260_macb.o COBJS-y += at91sam9260_serial.o COBJS-$(CONFIG_HAS_DATAFLASH) += at91sam9260_spi.o endif +ifdef CONFIG_AT91SAM9G20 +COBJS-$(CONFIG_MACB) += at91sam9260_macb.o +COBJS-y += at91sam9260_serial.o +COBJS-$(CONFIG_HAS_DATAFLASH) += at91sam9260_spi.o +endif ifdef CONFIG_AT91SAM9261 COBJS-y += at91sam9261_serial.o COBJS-$(CONFIG_HAS_DATAFLASH) += at91sam9261_spi.o diff --git a/cpu/arm926ejs/at91/usb.c b/cpu/arm926ejs/at91/usb.c index a15ab1693c9..7c44ad0e95e 100644 --- a/cpu/arm926ejs/at91/usb.c +++ b/cpu/arm926ejs/at91/usb.c @@ -33,7 +33,7 @@ int usb_cpu_init(void) { #if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \ - defined(CONFIG_AT91SAM9263) + defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) /* Enable PLLB */ at91_sys_write(AT91_CKGR_PLLBR, CONFIG_SYS_AT91_PLLB); while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB) @@ -62,7 +62,7 @@ int usb_cpu_stop(void) #endif #if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \ - defined(CONFIG_AT91SAM9263) + defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) /* Disable PLLB */ at91_sys_write(AT91_CKGR_PLLBR, 0); while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != 0) diff --git a/doc/README.at91 b/doc/README.at91 index 4e3928a475f..e460e666237 100644 --- a/doc/README.at91 +++ b/doc/README.at91 @@ -3,7 +3,7 @@ Atmel AT91 Evaluation kits http://atmel.com/dyn/products/tools.asp?family_id=605#1443 ------------------------------------------------------------------------------ -AT91SAM9260EK & AT91SAM9XEEK +AT91SAM9260EK, AT91SAM9G20EK & AT91SAM9XEEK ------------------------------------------------------------------------------ Memory map diff --git a/drivers/net/macb.c b/drivers/net/macb.c index af0409bd2cf..6de0a04410a 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -447,14 +447,14 @@ static int macb_init(struct eth_device *netdev, bd_t *bd) /* choose RMII or MII mode. This depends on the board */ #ifdef CONFIG_RMII #if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \ - defined(CONFIG_AT91SAM9263) + defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN)); #else macb_writel(macb, USRIO, 0); #endif #else #if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \ - defined(CONFIG_AT91SAM9263) + defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) macb_writel(macb, USRIO, MACB_BIT(CLKEN)); #else macb_writel(macb, USRIO, MACB_BIT(MII)); diff --git a/include/asm-arm/arch-at91/hardware.h b/include/asm-arm/arch-at91/hardware.h index b881e4e2e00..4f0e1a7e6d4 100644 --- a/include/asm-arm/arch-at91/hardware.h +++ b/include/asm-arm/arch-at91/hardware.h @@ -18,7 +18,7 @@ #if defined(CONFIG_AT91RM9200) #include -#elif defined(CONFIG_AT91SAM9260) +#elif defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9G20) #include #define AT91_BASE_SPI AT91SAM9260_BASE_SPI0 #define AT91_ID_UHP AT91SAM9260_ID_UHP diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index 2661563627f..1fae3a3b820 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -3,7 +3,7 @@ * Stelian Pop * Lead Tech Design * - * Configuation settings for the AT91SAM9260EK board. + * Configuation settings for the AT91SAM9260EK & AT91SAM9G20EK boards. * * See file CREDITS for list of people who contributed to this * project. @@ -28,18 +28,26 @@ #define __CONFIG_H /* ARM asynchronous clock */ -#define AT91_CPU_NAME "AT91SAM9260" #define AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */ -#define AT91_MASTER_CLOCK 100000000 /* peripheral */ -#define AT91_CPU_CLOCK 200000000 /* cpu */ #define CONFIG_SYS_AT91_PLLB 0x107c3e18 /* PLLB settings for USB */ #define CONFIG_SYS_HZ 1000000 /* 1us resolution */ #define AT91_SLOW_CLOCK 32768 /* slow clock */ #define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ + +#ifdef CONFIG_AT91SAM9G20EK +#define AT91_CPU_NAME "AT91SAM9G20" +#define AT91_MASTER_CLOCK 132000000 /* peripheral */ +#define AT91_CPU_CLOCK 396000000 /* cpu */ +#define CONFIG_AT91SAM9G20 1 /* It's an Atmel AT91SAM9G20 SoC*/ +#else +#define AT91_CPU_NAME "AT91SAM9260" +#define AT91_MASTER_CLOCK 100000000 /* peripheral */ +#define AT91_CPU_CLOCK 200000000 /* cpu */ #define CONFIG_AT91SAM9260 1 /* It's an Atmel AT91SAM9260 SoC*/ -#define CONFIG_AT91SAM9260EK 1 /* on an AT91SAM9260EK Board */ +#endif + #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ @@ -101,7 +109,12 @@ #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */ #define AT91_SPI_CLK 15000000 + +#ifdef CONFIG_AT91SAM9G20EK +#define DATAFLASH_TCSS (0x22 << 16) +#else #define DATAFLASH_TCSS (0x1a << 16) +#endif #define DATAFLASH_TCHS (0x1 << 24) /* NAND flash */ -- cgit v1.3.1