From 03ce33027469af14b98d6041fbb6cbd52d7c8712 Mon Sep 17 00:00:00 2001 From: Otavio Salvador Date: Mon, 6 Jan 2014 13:27:20 -0200 Subject: mx6sabresd: Add eMMC specific environment to allow U-Boot update A new 'update_emmc_firmware' target is added to allow for easy U-Boot update in the eMMC as it has secury boot partition and this needs specific handling on how to program the specific partition. Signed-off-by: Otavio Salvador --- include/configs/mx6sabre_common.h | 23 +++++++++++++++++++++++ include/configs/mx6sabresd.h | 2 ++ 2 files changed, 25 insertions(+) (limited to 'include/configs') diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index 21c848f90bd..5ee7fa5448d 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -95,6 +95,28 @@ #define CONFIG_LOADADDR 0x12000000 #define CONFIG_SYS_TEXT_BASE 0x17800000 +#ifdef CONFIG_SUPPORT_EMMC_BOOT +#define EMMC_ENV \ + "emmcdev=2\0" \ + "update_emmc_firmware=" \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "if ${get_cmd} ${update_sd_firmware_filename}; then " \ + "if mmc dev ${emmcdev} && " \ + "mmc open ${emmcdev} 1; then " \ + "setexpr fw_sz ${filesize} / 0x200; " \ + "setexpr fw_sz ${fw_sz} + 1; " \ + "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ + "mmc close ${emmcdev} 1; " \ + "fi; " \ + "fi\0" +#else +#define EMMC_ENV "" +#endif + #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "uimage=uImage\0" \ @@ -121,6 +143,7 @@ "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ "fi; " \ "fi\0" \ + EMMC_ENV \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ "root=${mmcroot}\0" \ "loadbootscript=" \ diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h index 3229bc70d86..4919f53328d 100644 --- a/include/configs/mx6sabresd.h +++ b/include/configs/mx6sabresd.h @@ -23,6 +23,8 @@ #endif #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) +#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ + #include "mx6sabre_common.h" #define CONFIG_SYS_FSL_USDHC_NUM 3 -- cgit v1.3.1 From f353397011a93179f17af9ae1004ab42ce6cfea2 Mon Sep 17 00:00:00 2001 From: John Weber Date: Mon, 6 Jan 2014 13:27:22 -0200 Subject: wandboard: Set default environment to use zImage Change the default environment to use zImage instead of uImage, this requires changes to the default environment to load a file named zImage instead of uImage, and to use the 'bootz' command instead of 'bootm' when booting the kernel. The zImage works for FSL Linux's kernel fork versions 3.0.35, 3.10.9, and 3.10.17; this also works fine for mainline kernels. Signed-off-by: John Weber Signed-off-by: Otavio Salvador --- include/configs/wandboard.h | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'include/configs') diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index ae8480dd24d..348847238e7 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -108,7 +108,7 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ - "uimage=uImage\0" \ + "image=zImage\0" \ "console=ttymxc0\0" \ "splashpos=m,m\0" \ "fdt_high=0xffffffff\0" \ @@ -140,22 +140,22 @@ "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ "bootscript=echo Running bootscript from mmc ...; " \ "source\0" \ - "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ + "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ "if run loadfdt; then " \ - "bootm ${loadaddr} - ${fdt_addr}; " \ + "bootz ${loadaddr} - ${fdt_addr}; " \ "else " \ "if test ${boot_fdt} = try; then " \ - "bootm; " \ + "bootz; " \ "else " \ "echo WARN: Cannot load the DT; " \ "fi; " \ "fi; " \ "else " \ - "bootm; " \ + "bootz; " \ "fi;\0" \ "netargs=setenv bootargs console=${console},${baudrate} " \ "root=/dev/nfs " \ @@ -167,19 +167,19 @@ "else " \ "setenv get_cmd tftp; " \ "fi; " \ - "${get_cmd} ${uimage}; " \ + "${get_cmd} ${image}; " \ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ - "bootm ${loadaddr} - ${fdt_addr}; " \ + "bootz ${loadaddr} - ${fdt_addr}; " \ "else " \ "if test ${boot_fdt} = try; then " \ - "bootm; " \ + "bootz; " \ "else " \ "echo WARN: Cannot load the DT; " \ "fi; " \ "fi; " \ "else " \ - "bootm; " \ + "bootz; " \ "fi;\0" #define CONFIG_BOOTCOMMAND \ @@ -187,7 +187,7 @@ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ - "if run loaduimage; then " \ + "if run loadimage; then " \ "run mmcboot; " \ "else run netboot; " \ "fi; " \ -- cgit v1.3.1 From a6bbee66197759f790de83181924bf1d2cf482b2 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 9 Jan 2014 08:57:12 -0200 Subject: mx6slevk: Include "mx6_common.h" Include "mx6_common.h" so that some ARM errata are applied and also the vddsoc regulator can be changed. Signed-off-by: Fabio Estevam Acked-by: Stefano Babic --- include/configs/mx6slevk.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/configs') diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index 7abad08c47c..b29f78cc2ce 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -11,6 +11,7 @@ #include #include +#include "mx6_common.h" #define CONFIG_MX6 #define CONFIG_DISPLAY_CPUINFO -- cgit v1.3.1 From e570aca9474bb707cd2cab0c5c9b8aba957ae51e Mon Sep 17 00:00:00 2001 From: Albert ARIBAUD Date: Mon, 13 Jan 2014 21:06:17 +0100 Subject: mx1ads: remove board support Signed-off-by: Albert ARIBAUD Acked-by: Stefano Babic --- board/mx1ads/Makefile | 16 --- board/mx1ads/lowlevel_init.S | 68 ---------- board/mx1ads/mx1ads.c | 178 ------------------------- board/mx1ads/syncflash.c | 307 ------------------------------------------- boards.cfg | 1 - doc/README.scrapyard | 1 + include/configs/mx1ads.h | 163 ----------------------- 7 files changed, 1 insertion(+), 733 deletions(-) delete mode 100644 board/mx1ads/Makefile delete mode 100644 board/mx1ads/lowlevel_init.S delete mode 100644 board/mx1ads/mx1ads.c delete mode 100644 board/mx1ads/syncflash.c delete mode 100644 include/configs/mx1ads.h (limited to 'include/configs') diff --git a/board/mx1ads/Makefile b/board/mx1ads/Makefile deleted file mode 100644 index 6dfd18e202e..00000000000 --- a/board/mx1ads/Makefile +++ /dev/null @@ -1,16 +0,0 @@ -# -# board/mx1ads/Makefile -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (c) Copyright 2004 -# Techware Information Technology, Inc. -# http://www.techware.com.tw/ -# -# Ming-Len Wu -# -# SPDX-License-Identifier: GPL-2.0+ - -obj-y := mx1ads.o syncflash.o -obj-y += lowlevel_init.o diff --git a/board/mx1ads/lowlevel_init.S b/board/mx1ads/lowlevel_init.S deleted file mode 100644 index d1e472a933c..00000000000 --- a/board/mx1ads/lowlevel_init.S +++ /dev/null @@ -1,68 +0,0 @@ -/* - * board/mx1ads/lowlevel_init.S - * - * (c) Copyright 2004 - * Techware Information Technology, Inc. - * http://www.techware.com.tw/ - * - * Ming-Len Wu - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -#define SDCTL0 0x221000 -#define SDCTL1 0x221004 - - -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE - -.globl lowlevel_init -lowlevel_init: -/* memory controller init */ - - ldr r1, =SDCTL0 - -/* Set Precharge Command */ - - ldr r3, =0x92120200 -/* ldr r3, =0x92120251 -*/ - str r3, [r1] - -/* Issue Precharge All Commad */ - ldr r3, =0x8200000 - ldr r2, [r3] - -/* Set AutoRefresh Command */ - ldr r3, =0xA2120200 - str r3, [r1] - -/* Issue AutoRefresh Command */ - ldr r3, =0x8000000 - ldr r2, [r3] - ldr r2, [r3] - ldr r2, [r3] - ldr r2, [r3] - ldr r2, [r3] - ldr r2, [r3] - ldr r2, [r3] - ldr r2, [r3] - -/* Set Mode Register */ - ldr r3, =0xB2120200 - str r3, [r1] - -/* Issue Mode Register Command */ - ldr r3, =0x08111800 /* Mode Register Value */ - ldr r2, [r3] - -/* Set Normal Mode */ - ldr r3, =0x82124200 - str r3, [r1] - -/* everything is fine now */ - mov pc, lr diff --git a/board/mx1ads/mx1ads.c b/board/mx1ads/mx1ads.c deleted file mode 100644 index 4266048981c..00000000000 --- a/board/mx1ads/mx1ads.c +++ /dev/null @@ -1,178 +0,0 @@ -/* - * board/mx1ads/mx1ads.c - * - * (c) Copyright 2004 - * Techware Information Technology, Inc. - * http://www.techware.com.tw/ - * - * Ming-Len Wu - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -/*#include */ -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -#define FCLK_SPEED 1 - -#if FCLK_SPEED==0 /* Fout = 203MHz, Fin = 12MHz for Audio */ -#define M_MDIV 0xC3 -#define M_PDIV 0x4 -#define M_SDIV 0x1 -#elif FCLK_SPEED==1 /* Fout = 202.8MHz */ -#define M_MDIV 0xA1 -#define M_PDIV 0x3 -#define M_SDIV 0x1 -#endif - -#define USB_CLOCK 1 - -#if USB_CLOCK==0 -#define U_M_MDIV 0xA1 -#define U_M_PDIV 0x3 -#define U_M_SDIV 0x1 -#elif USB_CLOCK==1 -#define U_M_MDIV 0x48 -#define U_M_PDIV 0x3 -#define U_M_SDIV 0x2 -#endif - -#if 0 - -static inline void delay (unsigned long loops) -{ - __asm__ volatile ("1:\n" - "subs %0, %1, #1\n" - "bne 1b":"=r" (loops):"0" (loops)); -} - -#endif - -/* - * Miscellaneous platform dependent initialisations - */ - -void SetAsynchMode (void) -{ - __asm__ ("mrc p15,0,r0,c1,c0,0 \n" - "mov r2, #0xC0000000 \n" - "orr r0,r2,r0 \n" "mcr p15,0,r0,c1,c0,0 \n"); -} - -static u32 mc9328sid; - -int board_early_init_f(void) -{ - mc9328sid = SIDR; - - GPCR = 0x000003AB; /* I/O pad driving strength */ - - /* MX1_CS1U = 0x00000A00; */ /* SRAM initialization */ -/* MX1_CS1L = 0x11110601; */ - - MPCTL0 = 0x04632410; /* setting for 150 MHz MCU PLL CLK */ - -/* set FCLK divider 1 (i.e. FCLK to MCU PLL CLK) and - * BCLK divider to 2 (i.e. BCLK to 48 MHz) - */ - CSCR = 0xAF000403; - - CSCR |= 0x00200000; /* Trigger the restart bit(bit 21) */ - CSCR &= 0xFFFF7FFF; /* Program PRESC bit(bit 15) to 0 to divide-by-1 */ - -/* setup cs4 for cs8900 ethernet */ - - CS4U = 0x00000F00; /* Initialize CS4 for CS8900 ethernet */ - CS4L = 0x00001501; - - GIUS (0) &= 0xFF3FFFFF; - GPR (0) &= 0xFF3FFFFF; - - readl(0x1500000C); - readl(0x1500000C); - - SetAsynchMode (); - - icache_enable (); - dcache_enable (); - -/* set PERCLKs */ - PCDR = 0x00000055; /* set PERCLKS */ - -/* PERCLK3 is only used by SSI so the SSI driver can set it any value it likes - * PERCLK1 and PERCLK2 are shared so DO NOT change it in any other place - * all sources selected as normal interrupt - */ - -/* MX1_INTTYPEH = 0; - MX1_INTTYPEL = 0; -*/ - return 0; -} - -int board_init(void) -{ - gd->bd->bi_arch_number = MACH_TYPE_MX1ADS; - - gd->bd->bi_boot_params = 0x08000100; /* adress of boot parameters */ - - return 0; -} - -int board_late_init (void) -{ - - setenv ("stdout", "serial"); - setenv ("stderr", "serial"); - - switch (mc9328sid) { - case 0x0005901d: - printf ("MX1ADS board with MC9328 MX1 (0L44N), Silicon ID 0x%08x \n\n", - mc9328sid); - break; - case 0x04d4c01d: - printf ("MX1ADS board with MC9328 MXL (1L45N), Silicon ID 0x%08x \n\n", - mc9328sid); - break; - case 0x00d4c01d: - printf ("MX1ADS board with MC9328 MXL (2L45N), Silicon ID 0x%08x \n\n", - mc9328sid); - break; - - default: - printf ("MX1ADS board with UNKNOWN MC9328 cpu, Silicon ID 0x%08x \n", - mc9328sid); - break; - } - return 0; -} - -int dram_init(void) -{ - /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((void *)PHYS_SDRAM_1, - PHYS_SDRAM_1_SIZE); - return 0; -} - -void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; -} - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_CS8900 - rc = cs8900_initialize(0, CONFIG_CS8900_BASE); -#endif - return rc; -} -#endif diff --git a/board/mx1ads/syncflash.c b/board/mx1ads/syncflash.c deleted file mode 100644 index 5d685338fb8..00000000000 --- a/board/mx1ads/syncflash.c +++ /dev/null @@ -1,307 +0,0 @@ -/* - * board/mx1ads/syncflash.c - * - * (c) Copyright 2004 - * Techware Information Technology, Inc. - * http://www.techware.com.tw/ - * - * Ming-Len Wu - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -/*#include */ -#include - -typedef unsigned long * p_u32; - -/* 4Mx16x2 IAM=0 CSD1 */ - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/* Following Setting is for CSD1 */ -#define SFCTL 0x00221004 -#define reg_SFCTL __REG(SFCTL) - -#define SYNCFLASH_A10 (0x00100000) - -#define CMD_NORMAL (0x81020300) /* Normal Mode */ -#define CMD_PREC (CMD_NORMAL + 0x10000000) /* Precharge Command */ -#define CMD_AUTO (CMD_NORMAL + 0x20000000) /* Auto Refresh Command */ -#define CMD_LMR (CMD_NORMAL + 0x30000000) /* Load Mode Register Command */ -#define CMD_LCR (CMD_NORMAL + 0x60000000) /* LCR Command */ -#define CMD_PROGRAM (CMD_NORMAL + 0x70000000) - -#define MODE_REG_VAL (CONFIG_SYS_FLASH_BASE+0x0008CC00) /* Cas Latency 3 */ - -/* LCR Command */ -#define LCR_READSTATUS (0x0001C000) /* 0x70 */ -#define LCR_ERASE_CONFIRM (0x00008000) /* 0x20 */ -#define LCR_ERASE_NVMODE (0x0000C000) /* 0x30 */ -#define LCR_PROG_NVMODE (0x00028000) /* 0xA0 */ -#define LCR_SR_CLEAR (0x00014000) /* 0x50 */ - -/* Get Status register */ -u32 SF_SR(void) { - u32 tmp; - - reg_SFCTL = CMD_PROGRAM; - tmp = __REG(CONFIG_SYS_FLASH_BASE); - - reg_SFCTL = CMD_NORMAL; - - reg_SFCTL = CMD_LCR; /* Activate LCR Mode */ - __REG(CONFIG_SYS_FLASH_BASE + LCR_SR_CLEAR); - - return tmp; -} - -/* check if SyncFlash is ready */ -u8 SF_Ready(void) { - u32 tmp; - - tmp = SF_SR(); - - if ((tmp & 0x00800000) && (tmp & 0x001C0000)) { - printf ("SyncFlash Error code %08x\n",tmp); - }; - - if ((tmp & 0x00000080) && (tmp & 0x0000001C)) { - printf ("SyncFlash Error code %08x\n",tmp); - }; - - if (tmp == 0x00800080) /* Test Bit 7 of SR */ - return 1; - else - return 0; -} - -/* Issue the precharge all command */ -void SF_PrechargeAll(void) { - - /* Set Precharge Command */ - reg_SFCTL = CMD_PREC; - /* Issue Precharge All Command */ - __REG(CONFIG_SYS_FLASH_BASE + SYNCFLASH_A10); -} - -/* set SyncFlash to normal mode */ -void SF_Normal(void) { - - SF_PrechargeAll(); - - reg_SFCTL = CMD_NORMAL; -} - -/* Erase SyncFlash */ -void SF_Erase(u32 RowAddress) { - - reg_SFCTL = CMD_NORMAL; - __REG(RowAddress); - - reg_SFCTL = CMD_PREC; - __REG(RowAddress); - - reg_SFCTL = CMD_LCR; /* Set LCR mode */ - __REG(RowAddress + LCR_ERASE_CONFIRM) = 0; /* Issue Erase Setup Command */ - - reg_SFCTL = CMD_NORMAL; /* return to Normal mode */ - __REG(RowAddress) = 0xD0D0D0D0; /* Confirm */ - - while(!SF_Ready()); -} - -void SF_NvmodeErase(void) { - SF_PrechargeAll(); - - reg_SFCTL = CMD_LCR; /* Set to LCR mode */ - __REG(CONFIG_SYS_FLASH_BASE + LCR_ERASE_NVMODE) = 0; /* Issue Erase Nvmode Reg Command */ - - reg_SFCTL = CMD_NORMAL; /* Return to Normal mode */ - __REG(CONFIG_SYS_FLASH_BASE + LCR_ERASE_NVMODE) = 0xC0C0C0C0; /* Confirm */ - - while(!SF_Ready()); -} - -void SF_NvmodeWrite(void) { - SF_PrechargeAll(); - - reg_SFCTL = CMD_LCR; /* Set to LCR mode */ - __REG(CONFIG_SYS_FLASH_BASE+LCR_PROG_NVMODE) = 0; /* Issue Program Nvmode reg command */ - - reg_SFCTL = CMD_NORMAL; /* Return to Normal mode */ - __REG(CONFIG_SYS_FLASH_BASE+LCR_PROG_NVMODE) = 0xC0C0C0C0; /* Confirm not needed */ -} - -/****************************************************************************************/ - -ulong flash_init(void) { - int i, j; - -/* Turn on CSD1 for negating RESETSF of SyncFLash */ - - reg_SFCTL |= 0x80000000; /* enable CSD1 for SyncFlash */ - udelay(200); - - reg_SFCTL = CMD_LMR; /* Set Load Mode Register Command */ - __REG(MODE_REG_VAL); /* Issue Load Mode Register Command */ - - SF_Normal(); - - i = 0; - - flash_info[i].flash_id = FLASH_MAN_MT | FLASH_MT28S4M16LC; - - flash_info[i].size = FLASH_BANK_SIZE; - flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT; - - memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT); - - for (j = 0; j < flash_info[i].sector_count; j++) { - flash_info[i].start[j] = CONFIG_SYS_FLASH_BASE + j * 0x00100000; - } - - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, - &flash_info[0]); - - flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, - &flash_info[0]); - - return FLASH_BANK_SIZE; -} - -void flash_print_info (flash_info_t *info) { - - int i; - - switch (info->flash_id & FLASH_VENDMASK) { - case (FLASH_MAN_MT & FLASH_VENDMASK): - printf("Micron: "); - break; - default: - printf("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case (FLASH_MT28S4M16LC & FLASH_TYPEMASK): - printf("2x FLASH_MT28S4M16LC (16MB Total)\n"); - break; - default: - printf("Unknown Chip Type\n"); - return; - break; - } - - printf(" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf(" Sector Start Addresses: "); - - for (i = 0; i < info->sector_count; i++) { - if ((i % 5) == 0) - printf ("\n "); - - printf (" %08lX%s", info->start[i], - info->protect[i] ? " (RO)" : " "); - } - - printf ("\n"); -} - -/*-----------------------------------------------------------------------*/ - -int flash_erase (flash_info_t *info, int s_first, int s_last) { - int iflag, cflag, prot, sect; - int rc = ERR_OK; - -/* first look for protection bits */ - - if (info->flash_id == FLASH_UNKNOWN) - return ERR_UNKNOWN_FLASH_TYPE; - - if ((s_first < 0) || (s_first > s_last)) - return ERR_INVAL; - - if ((info->flash_id & FLASH_VENDMASK) != (FLASH_MAN_MT & FLASH_VENDMASK)) - return ERR_UNKNOWN_FLASH_VENDOR; - - prot = 0; - - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) - prot++; - } - - if (prot) { - printf("protected!\n"); - return ERR_PROTECTED; - } -/* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - - cflag = icache_status(); - icache_disable(); - iflag = disable_interrupts(); - -/* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last && !ctrlc(); sect++) { - - printf("Erasing sector %2d ... ", sect); - -/* arm simple, non interrupt dependent timer */ - - get_timer(0); - - SF_NvmodeErase(); - SF_NvmodeWrite(); - - SF_Erase(CONFIG_SYS_FLASH_BASE + (0x0100000 * sect)); - SF_Normal(); - - printf("ok.\n"); - } - - if (ctrlc()) - printf("User Interrupt!\n"); - - if (iflag) - enable_interrupts(); - - if (cflag) - icache_enable(); - - return rc; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash. - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) { - int i; - - for(i = 0; i < cnt; i += 4) { - - SF_PrechargeAll(); - - reg_SFCTL = CMD_PROGRAM; /* Enter SyncFlash Program mode */ - __REG(addr + i) = __REG((u32)src + i); - - while(!SF_Ready()); - } - - SF_Normal(); - - return ERR_OK; -} diff --git a/boards.cfg b/boards.cfg index af739347e7b..928e22239d1 100644 --- a/boards.cfg +++ b/boards.cfg @@ -65,7 +65,6 @@ Active arm arm920t at91 BuS eb_cpux9k2 Active arm arm920t at91 BuS eb_cpux9k2 eb_cpux9k2_ram eb_cpux9k2:RAMBOOT Jens Scharsig Active arm arm920t at91 eukrea cpuat91 cpuat91 cpuat91 Eric Benard Active arm arm920t at91 eukrea cpuat91 cpuat91_ram cpuat91:RAMBOOT Eric Benard -Active arm arm920t imx - - mx1ads - - Active arm arm920t imx - - scb9328 - Torsten Koschorrek Active arm arm920t ks8695 - - cm4008 - Greg Ungerer Active arm arm920t ks8695 - - cm41xx - - diff --git a/doc/README.scrapyard b/doc/README.scrapyard index be3e97eebde..2aed8559939 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,6 +11,7 @@ easily if here is something they might want to dig for... Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +mx1ads arm arm920t - 2014-01-13 mini2440 arm arm920t - 2014-01-13 Gabriel Huau omap730p2 arm arm926ejs 79c5c08d 2013-11-11 pn62 powerpc mpc824x 649acfe1 2013-11-11 Wolfgang Grandegger diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h deleted file mode 100644 index 12667c57c13..00000000000 --- a/include/configs/mx1ads.h +++ /dev/null @@ -1,163 +0,0 @@ -/* - * include/configs/mx1ads.h - * - * (c) Copyright 2004 - * Techware Information Technology, Inc. - * http://www.techware.com.tw/ - * - * Ming-Len Wu - * - * This is the Configuration setting for Motorola MX1ADS board - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -#define CONFIG_IMX 1 /* It's a Motorola MC9328 SoC */ -#define CONFIG_MX1ADS 1 /* on a Motorola MX1ADS Board */ - -/* - * Select serial console configuration - */ -#define CONFIG_IMX_SERIAL -#define CONFIG_IMX_SERIAL1 /* internal uart 1 */ -/* #define _CONFIG_UART2 */ /* internal uart 2 */ -/* #define CONFIG_SILENT_CONSOLE */ /* use this to disable output */ - -#define CONFIG_BOARD_LATE_INIT -#define USE_920T_MMU 1 - -#if 0 -#define CONFIG_SYS_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */ -#define CONFIG_SYS_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */ -#define CONFIG_SYS_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */ -#endif - -/* - * Size of malloc() pool - */ - -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * CS8900 Ethernet drivers - */ -#define CONFIG_CS8900 /* we have a CS8900 on-board */ -#define CONFIG_CS8900_BASE 0x15000300 -#define CONFIG_CS8900_BUS16 /* the Linux driver does accesses as shorts */ - -/* - * select serial console configuration - */ - -/* #define CONFIG_UART1 */ -/* #define CONFIG_UART2 1 */ - -#define CONFIG_BAUDRATE 115200 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_ELF - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTARGS "root=/dev/msdk mem=48M" -#define CONFIG_BOOTFILE "mx1ads" -#define CONFIG_BOOTCOMMAND "tftp; bootm" - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -#endif - -/* - * Miscellaneous configurable options - */ - -#define CONFIG_SYS_HUSH_PARSER 1 - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ - -#ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT "MX1ADS$ " /* Monitor Command Prompt */ -#else -#define CONFIG_SYS_PROMPT "MX1ADS=> " /* Monitor Command Prompt */ -#endif - -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) - /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x09000000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0AF00000 /* 63 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x08800000 /* default load address */ -#define CONFIG_SYS_HZ 3686400 -#define CONFIG_SYS_CPUSPEED 0x141 - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ - -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */ -#define PHYS_SDRAM_1 0x08000000 /* SDRAM on CSD0 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ - -#define CONFIG_SYS_TEXT_BASE 0x10000000 - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR 0x00300000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x000FFFFF -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_GBL_DATA_OFFSET) - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* 1 bank of SyncFlash */ -#define CONFIG_SYS_FLASH_BASE 0x0C000000 /* SyncFlash on CSD1 */ -#define FLASH_BANK_SIZE 0x01000000 /* 16 MB Total */ - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ - -#define CONFIG_SYNCFLASH 1 -#define PHYS_FLASH_SIZE 0x01000000 -#define CONFIG_SYS_MAX_FLASH_SECT (16) -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+0x00ff8000) - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x04000 /* Total Size of Environment Sector */ -#define CONFIG_ENV_SECT_SIZE 0x100000 - -/*----------------------------------------------------------------------- - * Enable passing ATAGS - */ - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 - -#define CONFIG_SYS_CLK_FREQ 16780000 -#define CONFIG_SYSPLL_CLK_FREQ 16000000 - -#endif /* __CONFIG_H */ -- cgit v1.3.1