From 8e585f02f82c17cc66cd229dbf0fd3066bbbf658 Mon Sep 17 00:00:00 2001 From: TsiChung Liew Date: Mon, 18 Jun 2007 13:50:13 -0500 Subject: Added M5329AFEE and M5329BFEE Platforms Added board/freescale/m5329evb, cpu/mcf532x, drivers/net, drivers/serial, immap_5329.h, m5329.h, mcfrtc.h, include/configs/M5329EVB.h, lib_m68k/interrupts.c, and rtc/mcfrtc.c Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c, common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h, include/asm-m68k/io.h, include/asm-m68k/mcftimer.h, include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h, include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c, lib_m68k/time.c, net/eth.c and rtc/Makefile Signed-off-by: TsiChung Liew --- include/configs/M5329EVB.h | 275 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 275 insertions(+) create mode 100644 include/configs/M5329EVB.h (limited to 'include/configs') diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h new file mode 100644 index 00000000000..ac529dfbc29 --- /dev/null +++ b/include/configs/M5329EVB.h @@ -0,0 +1,275 @@ +/* + * Configuation settings for the Freescale MCF5329 FireEngine board. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef _M5329EVB_H +#define _M5329EVB_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_MCF532x /* define processor family */ +#define CONFIG_M5329 /* define processor type */ + +#undef DEBUG + +#define CONFIG_MCFSERIAL +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } + +#undef CONFIG_WATCHDOG +#define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ + +#define CFG_NUM_IRQS 128 + +#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ + CFG_CMD_CACHE | \ + CFG_CMD_DATE | \ + CFG_CMD_ELF | \ + CFG_CMD_FLASH | \ + (CFG_CMD_LOADB | CFG_CMD_LOADS) | \ + CFG_CMD_MEMORY | \ + CFG_CMD_MISC | \ + CFG_CMD_MII | \ + CFG_CMD_NET | \ + CFG_CMD_PING | \ + CFG_CMD_REGINFO \ + ) + +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_MULTI 1 +# define CONFIG_MII 1 +# define CFG_DISCOVER_PHY +# define CFG_RX_ETH_BUFFER 8 +# define CFG_FAULT_ECHO_LINK_DOWN + +# define CFG_FEC0_IOBASE 0xFC030000 +# define CFG_FEC0_PINMUX 0 +# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 +/* If CFG_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CFG_DISCOVER_PHY +# define FECDUPLEX FULL +# define FECSPEED _100BASET +# else +# ifndef CFG_FAULT_ECHO_LINK_DOWN +# define CFG_FAULT_ECHO_LINK_DOWN +# endif +# endif /* CFG_DISCOVER_PHY */ +#endif + +#define CONFIG_MCFUART +#ifdef CONFIG_MCFUART +# define CFG_UART_PORT (0) +# define CFG_UART_BASE (0xFC060000) +#endif + +#define CONFIG_MCFRTC +#ifdef CONFIG_MCFRTC +# define CFG_MCFRTC_BASE (0xFC0A8000) +# undef RTC_DEBUG +#endif + +/* Timer */ +#define CONFIG_MCFTMR +#ifdef CONFIG_MCFTMR +# define CFG_UDELAY_BASE (0xFC070000) +# define CFG_TMR_BASE (0xFC074000) +# define CFG_TMRINTR_NO (33) +# define CFG_TMRINTR_MASK (2) +# define CFG_TMRINTR_PRI (6) +# define CFG_TIMER_PRESCALER (((CFG_CLK / 1000000) - 1) << 8) +#endif + +#undef CONFIG_MCFPIT +#ifdef CONFIG_MCFPIT +# define CFG_UDELAY_BASE (0xFC080000) +# define CFG_PIT_BASE (0xFC084000) +# define CFG_PIT_PRESCALE (6) +#endif + +#define CONFIG_MCFINTC +#ifdef CONFIG_MCFINTC +# define CFG_INTR_BASE (0xFC048000) +# define CFG_NUM_IRQ0 64 +# define CFG_NUM_IRQ1 64 +#endif + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include +#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ +#ifdef CONFIG_MCFFEC +# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 +# define CONFIG_IPADDR 192.162.1.2 +# define CONFIG_NETMASK 255.255.255.0 +# define CONFIG_SERVERIP 192.162.1.1 +# define CONFIG_GATEWAYIP 192.162.1.1 +# define CONFIG_OVERWRITE_ETHADDR_ONCE +#endif /* FEC_ENET */ + +#define CONFIG_HOSTNAME M5329EVB +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "loadaddr=40010000\0" \ + "u-boot=u-boot.bin\0" \ + "load=tftp ${loadaddr) ${u-boot}\0" \ + "upd=run load; run prog\0" \ + "prog=prot off 0 2ffff;" \ + "era 0 2ffff;" \ + "cp.b ${loadaddr} 0 ${filesize};" \ + "save\0" \ + "" + +#define CONFIG_PRAM 512 /* 512 KB */ +#define CFG_PROMPT "-> " +#define CFG_LONGHELP /* undef to save memory */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +# define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_LOAD_ADDR 0x40010000 + +#define CFG_HZ 1000 +#define CFG_CLK 80000000 +#define CFG_CPU_CLK CFG_CLK * 3 + +#define CFG_MBAR 0xFC000000 + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR 0x80000000 +#define CFG_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */ +#define CFG_INIT_RAM_CTRL 0x221 +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x40000000 +#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ +#define CFG_SDRAM_CFG1 0x53722730 +#define CFG_SDRAM_CFG2 0x56670000 +#define CFG_SDRAM_CTRL 0xE1092000 +#define CFG_SDRAM_EMOD 0x40010000 +#define CFG_SDRAM_MODE 0x018D0000 + +#define CFG_MEMTEST_START CFG_SDRAM_BASE + 0x400 +#define CFG_MEMTEST_END ((CFG_SDRAM_SIZE - 3) << 20) + +#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ + +#define CFG_BOOTPARAMS_LEN 64*1024 +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization ?? + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#undef CFG_FLASH_CFI +#ifdef CFG_FLASH_CFI +# define CFG_FLASH_CFI_DRIVER 1 +# define CFG_FLASH_SIZE 0x800000 /* Max size that the board might have */ +# define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT +#else +# define CFG_FLASH_UNLOCK_TOUT 1000 +# define CFG_FLASH_WRITE_TOUT 1000 +#endif + +#define CFG_FLASH_BASE 0 +#define CFG_FLASH0_BASE (CFG_CS0_BASE << 16) +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ +#define CFG_FLASH_ERASE_TOUT 1000 +#define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ + +/* Configuration for environment + * Environment is embedded in u-boot in the second sector of the flash + */ +#define CFG_ENV_OFFSET 0x4000 +#define CFG_ENV_SECT_SIZE 0x2000 +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_IS_EMBEDDED 1 + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 + +/*----------------------------------------------------------------------- + * Chipselect bank definitions + */ +/* + * CS0 - NOR Flash 1, 2, 4, or 8MB + * CS1 - CompactFlash and registers + * CS2 - NAND Flash 16, 32, or 64MB + * CS3 - Available + * CS4 - Available + * CS5 - Available + */ +#define CFG_CS0_BASE 0 +#define CFG_CS0_MASK 0x007f0001 +#define CFG_CS0_CTRL 0x00001fa0 + +#define CFG_CS1_BASE 0x1000 +#define CFG_CS1_MASK 0x001f0001 +#define CFG_CS1_CTRL 0x002A3780 + +#ifdef NANDFLASH_SIZE +#define CFG_CS2_BASE 0x00800000 +#define CFG_CS2_MASK 0x00ff0001 +#define CFG_CS2_CTRL 0x00001f60 +#endif + +#define CONFIG_UDP_CHECKSUM + +#endif /* _M5329EVB_H */ -- cgit v1.3.1 From 5d187430a055d62f17ca84d75e7245439d1f7e75 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Fri, 6 Jul 2007 11:48:24 +0200 Subject: ppc4xx: Update lwmon5 board Add unlock=yes environment variable to default variables to unlock the CFI flash by default. Signed-off-by: Stefan Roese --- include/configs/lwmon5.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/configs') diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 1d87c73c711..01adef1d6e2 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -162,6 +162,7 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "hostname=lwmon5\0" \ "netdev=eth0\0" \ + "unlock=yes\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=${serverip}:${rootpath}\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ -- cgit v1.3.1 From 334043f601a90ac53e5ecc846fbb73a1ef38cb1f Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Fri, 6 Jul 2007 12:26:51 +0200 Subject: ppc4xx: Update lwmon5 default environment Signed-off-by: Stefan Roese --- include/configs/lwmon5.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/configs') diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 01adef1d6e2..c4b7c4ee504 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -184,6 +184,8 @@ "update=protect off FFF80000 FFFFFFFF;era FFF80000 FFFFFFFF;" \ "cp.b 200000 FFF80000 80000\0" \ "upd=run load;run update\0" \ + "lwe_env=tftp 200000 /tftpboot.dev/lwmon5/env_uboot.bin;" \ + "autoscr 200000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" -- cgit v1.3.1 From bd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803 Mon Sep 17 00:00:00 2001 From: Matthias Fuchs Date: Mon, 9 Jul 2007 10:10:06 +0200 Subject: Migrate esd 405EP boards to new NAND subsystem Migrate esd 405EP boards to new NAND subsystem -cleanup -use correct io accessors (in/out_be32()) Signed-off-by: Matthias Fuchs --- board/esd/ash405/Makefile | 4 +++- board/esd/ash405/ash405.c | 43 +++++++++-------------------------- board/esd/cms700/Makefile | 5 ++++- board/esd/cms700/cms700.c | 39 +++++++------------------------- board/esd/hh405/Makefile | 5 ++++- board/esd/hh405/hh405.c | 22 +----------------- board/esd/hub405/Makefile | 4 +++- board/esd/hub405/hub405.c | 34 ---------------------------- board/esd/plu405/Makefile | 5 ++++- board/esd/plu405/plu405.c | 56 ++++++++-------------------------------------- board/esd/voh405/Makefile | 4 +++- board/esd/voh405/voh405.c | 20 ----------------- board/esd/wuh405/Makefile | 4 +++- board/esd/wuh405/wuh405.c | 33 --------------------------- include/configs/ASH405.h | 43 ++++++++++------------------------- include/configs/CMS700.h | 39 ++++++++------------------------ include/configs/HH405.h | 39 ++++++++------------------------ include/configs/HUB405.h | 39 ++++++++------------------------ include/configs/PLU405.h | 57 ++++++++--------------------------------------- include/configs/VOH405.h | 39 ++++++++------------------------ include/configs/WUH405.h | 42 +++++++++------------------------- 21 files changed, 120 insertions(+), 456 deletions(-) (limited to 'include/configs') diff --git a/board/esd/ash405/Makefile b/board/esd/ash405/Makefile index 4d75868ea84..308f752d095 100644 --- a/board/esd/ash405/Makefile +++ b/board/esd/ash405/Makefile @@ -28,7 +28,9 @@ endif LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o ../common/misc.o +COBJS = $(BOARD).o flash.o \ + ../common/misc.o \ + ../common/esd405ep_nand.o \ SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/ash405/ash405.c b/board/esd/ash405/ash405.c index 84fc3a01dc2..0151d740c7e 100644 --- a/board/esd/ash405/ash405.c +++ b/board/esd/ash405/ash405.c @@ -23,6 +23,7 @@ #include #include +#include #include #include @@ -33,6 +34,7 @@ #endif extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); +extern void lxt971_no_sleep(void); /* fpga configuration data - gzip compressed and generated by bin2c */ const unsigned char fpgadata[] = @@ -164,17 +166,11 @@ int misc_init_r (void) /* * Reset external DUARTs */ - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_DUART_RST); /* set reset to high */ + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_DUART_RST); udelay(10); /* wait 10us */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */ + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_DUART_RST); udelay(1000); /* wait 1ms */ - /* - * Set NAND-FLASH GPIO signals to default - */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE); - /* * Enable interrupts in exar duart mcr[3] */ @@ -218,35 +214,18 @@ long int initdram (int board_type) mtdcr(memcfga, mem_mb0cf); val = mfdcr(memcfgd); -#if 0 - printf("\nmb0cf=%x\n", val); /* test-only */ - printf("strap=%x\n", mfdcr(strap)); /* test-only */ -#endif - return (4*1024*1024 << ((val & 0x000e0000) >> 17)); } /* ------------------------------------------------------------------------- */ -int testdram (void) +void reset_phy(void) { - /* TODO: XXX XXX XXX */ - printf ("test: 16 MB - ok\n"); - - return (0); -} +#ifdef CONFIG_LXT971_NO_SLEEP -/* ------------------------------------------------------------------------- */ - -#if (CONFIG_COMMANDS & CFG_CMD_NAND) -#include -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - nand_probe(CFG_NAND_BASE); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { - print_size(nand_dev_desc[0].totlen, "\n"); - } -} + /* + * Disable sleep mode in LXT971 + */ + lxt971_no_sleep(); #endif +} diff --git a/board/esd/cms700/Makefile b/board/esd/cms700/Makefile index df487662fd2..0d4ab2d13a9 100644 --- a/board/esd/cms700/Makefile +++ b/board/esd/cms700/Makefile @@ -33,7 +33,10 @@ CPLD = ../common/xilinx_jtag/lenval.o \ ../common/xilinx_jtag/micro.o \ ../common/xilinx_jtag/ports.o -COBJS = $(BOARD).o flash.o ../common/misc.o $(CPLD) +COBJS = $(BOARD).o flash.o \ + ../common/misc.o \ + $(CPLD) \ + ../common/esd405ep_nand.o \ SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/cms700/cms700.c b/board/esd/cms700/cms700.c index cb047107374..2cdd7be360c 100644 --- a/board/esd/cms700/cms700.c +++ b/board/esd/cms700/cms700.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2005 + * (C) Copyright 2005-2007 * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com * * See file CREDITS for list of people who contributed to this @@ -23,6 +23,7 @@ #include #include +#include #include #include @@ -68,9 +69,9 @@ int board_early_init_f (void) /* * Reset CPLD via GPIO12 (CS3) pin */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_PLD_RESET); + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_PLD_RESET); udelay(1000); /* wait 1ms */ - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_PLD_RESET); + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_PLD_RESET); udelay(1000); /* wait 1ms */ return 0; @@ -94,13 +95,7 @@ int misc_init_r (void) /* * Setup and enable EEPROM write protection */ - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP); - - /* - * Set NAND-FLASH GPIO signals to default - */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE); + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_EEPROM_WP); return (0); } @@ -153,11 +148,6 @@ long int initdram (int board_type) mtdcr(memcfga, mem_mb0cf); val = mfdcr(memcfgd); -#if 0 - printf("\nmb0cf=%x\n", val); /* test-only */ - printf("strap=%x\n", mfdcr(strap)); /* test-only */ -#endif - return (4*1024*1024 << ((val & 0x000e0000) >> 17)); } @@ -180,17 +170,17 @@ int eeprom_write_enable (unsigned dev_addr, int state) switch (state) { case 1: /* Enable write access, clear bit GPIO_SINT2. */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_EEPROM_WP); + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_EEPROM_WP); state = 0; break; case 0: /* Disable write access, set bit GPIO_SINT2. */ - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP); + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_EEPROM_WP); state = 0; break; default: /* Read current status back. */ - state = (0 == (in32(GPIO0_OR) & CFG_EEPROM_WP)); + state = (0 == (in_be32((void *)GPIO0_OR) & CFG_EEPROM_WP)); break; } } @@ -235,19 +225,6 @@ U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, /* ------------------------------------------------------------------------- */ -#if (CONFIG_COMMANDS & CFG_CMD_NAND) -#include -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - nand_probe(CFG_NAND_BASE); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { - print_size(nand_dev_desc[0].totlen, "\n"); - } -} -#endif - void reset_phy(void) { #ifdef CONFIG_LXT971_NO_SLEEP diff --git a/board/esd/hh405/Makefile b/board/esd/hh405/Makefile index ce7876c414e..0e5e57a5ade 100644 --- a/board/esd/hh405/Makefile +++ b/board/esd/hh405/Makefile @@ -28,7 +28,10 @@ endif LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o ../common/misc.o ../common/auto_update.o +COBJS = $(BOARD).o flash.o \ + ../common/misc.o \ + ../common/esd405ep_nand.o \ + ../common/auto_update.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/hh405/hh405.c b/board/esd/hh405/hh405.c index ea344c0f26d..67b5d5406dd 100644 --- a/board/esd/hh405/hh405.c +++ b/board/esd/hh405/hh405.c @@ -5,7 +5,7 @@ * (C) Copyright 2005 * Stefan Roese, DENX Software Engineering, sr@denx.de. * - * (C) Copyright 2006 + * (C) Copyright 2006-2007 * Matthias Fuchs, esd GmbH, matthias.fuchs@esd-electronics.com * * See file CREDITS for list of people who contributed to this @@ -476,12 +476,6 @@ int misc_init_r (void) */ out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP); - /* - * Set NAND-FLASH GPIO signals to default - */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE); - /* * Reset touch-screen controller */ @@ -690,20 +684,6 @@ void ide_set_reset(int on) #endif /* CONFIG_IDE_RESET */ -#if (CONFIG_COMMANDS & CFG_CMD_NAND) -#include -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - nand_probe(CFG_NAND_BASE); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { - print_size(nand_dev_desc[0].totlen, "\n"); - } -} -#endif - - #if defined(CFG_EEPROM_WREN) /* Input: I2C address of EEPROM device to enable. * -1: deliver current state diff --git a/board/esd/hub405/Makefile b/board/esd/hub405/Makefile index 4d75868ea84..308f752d095 100644 --- a/board/esd/hub405/Makefile +++ b/board/esd/hub405/Makefile @@ -28,7 +28,9 @@ endif LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o ../common/misc.o +COBJS = $(BOARD).o flash.o \ + ../common/misc.o \ + ../common/esd405ep_nand.o \ SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/hub405/hub405.c b/board/esd/hub405/hub405.c index 1e0accbe0e5..25c8068fdec 100644 --- a/board/esd/hub405/hub405.c +++ b/board/esd/hub405/hub405.c @@ -152,12 +152,6 @@ int misc_init_r (void) out32(GPIO0_OR, val); - /* - * Set NAND-FLASH GPIO signals to default - */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE); - /* * check board type and setup AP power */ @@ -242,33 +236,5 @@ long int initdram (int board_type) mtdcr(memcfga, mem_mb0cf); val = mfdcr(memcfgd); -#if 0 - printf("\nmb0cf=%x\n", val); /* test-only */ - printf("strap=%x\n", mfdcr(strap)); /* test-only */ -#endif - return (4*1024*1024 << ((val & 0x000e0000) >> 17)); } - - -int testdram (void) -{ - /* TODO: XXX XXX XXX */ - printf ("test: 16 MB - ok\n"); - - return (0); -} - - -#if (CONFIG_COMMANDS & CFG_CMD_NAND) -#include -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - nand_probe(CFG_NAND_BASE); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { - print_size(nand_dev_desc[0].totlen, "\n"); - } -} -#endif diff --git a/board/esd/plu405/Makefile b/board/esd/plu405/Makefile index ce7876c414e..0e5e57a5ade 100644 --- a/board/esd/plu405/Makefile +++ b/board/esd/plu405/Makefile @@ -28,7 +28,10 @@ endif LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o ../common/misc.o ../common/auto_update.o +COBJS = $(BOARD).o flash.o \ + ../common/misc.o \ + ../common/esd405ep_nand.o \ + ../common/auto_update.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/plu405/plu405.c b/board/esd/plu405/plu405.c index 59171f8f4c5..f026a7ac3b2 100644 --- a/board/esd/plu405/plu405.c +++ b/board/esd/plu405/plu405.c @@ -23,6 +23,7 @@ #include #include +#include #include #include @@ -31,6 +32,8 @@ #define FPGA_DEBUG #endif +DECLARE_GLOBAL_DATA_PTR; + extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); extern void lxt971_no_sleep(void); @@ -114,6 +117,10 @@ int misc_init_r (void) int index; int i; + /* adjust flash start and offset */ + gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; + gd->bd->bi_flashoffset = 0; + dst = malloc(CFG_FPGA_MAX_SIZE); if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) { printf ("GUNZIP ERROR - must RESET board to recover\n"); @@ -177,17 +184,11 @@ int misc_init_r (void) /* * Reset external DUARTs */ - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_DUART_RST); /* set reset to high */ + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_DUART_RST); udelay(10); /* wait 10us */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */ + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_DUART_RST); udelay(1000); /* wait 1ms */ - /* - * Set NAND-FLASH GPIO signals to default - */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE); - /* * Enable interrupts in exar duart mcr[3] */ @@ -226,24 +227,10 @@ long int initdram (int board_type) mtdcr(memcfga, mem_mb0cf); val = mfdcr(memcfgd); -#if 0 - printf("\nmb0cf=%x\n", val); /* test-only */ - printf("strap=%x\n", mfdcr(strap)); /* test-only */ -#endif - return (4*1024*1024 << ((val & 0x000e0000) >> 17)); } -int testdram (void) -{ - /* TODO: XXX XXX XXX */ - printf ("test: 16 MB - ok\n"); - - return (0); -} - - #ifdef CONFIG_IDE_RESET void ide_set_reset(int on) { @@ -262,31 +249,6 @@ void ide_set_reset(int on) #endif /* CONFIG_IDE_RESET */ -#if (CONFIG_COMMANDS & CFG_CMD_NAND) -#include -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - nand_probe(CFG_NAND_BASE); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { - print_size(nand_dev_desc[0].totlen, "\n"); - } -} -#endif - - -#ifdef CONFIG_AUTO_UPDATE_SHOW -void board_auto_update_show(int au_active) -{ - if (au_active) { - printf("\n Dies ist die board-funktion: Updating!!!\n"); - } else { - printf("\n Dies ist die board-funktion: Updating done!!!\n"); - } -} -#endif - void reset_phy(void) { #ifdef CONFIG_LXT971_NO_SLEEP diff --git a/board/esd/voh405/Makefile b/board/esd/voh405/Makefile index 4d75868ea84..308f752d095 100644 --- a/board/esd/voh405/Makefile +++ b/board/esd/voh405/Makefile @@ -28,7 +28,9 @@ endif LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o ../common/misc.o +COBJS = $(BOARD).o flash.o \ + ../common/misc.o \ + ../common/esd405ep_nand.o \ SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/voh405/voh405.c b/board/esd/voh405/voh405.c index 22995b50209..2857a0bef5e 100644 --- a/board/esd/voh405/voh405.c +++ b/board/esd/voh405/voh405.c @@ -194,12 +194,6 @@ int misc_init_r (void) out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */ udelay(1000); /* wait 1ms */ - /* - * Set NAND-FLASH GPIO signals to default - */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE); - /* * Enable interrupts in exar duart mcr[3] */ @@ -340,17 +334,3 @@ void ide_set_reset(int on) } } #endif /* CONFIG_IDE_RESET */ - - -#if (CONFIG_COMMANDS & CFG_CMD_NAND) -#include -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - nand_probe(CFG_NAND_BASE); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { - print_size(nand_dev_desc[0].totlen, "\n"); - } -} -#endif diff --git a/board/esd/wuh405/Makefile b/board/esd/wuh405/Makefile index 4d75868ea84..308f752d095 100644 --- a/board/esd/wuh405/Makefile +++ b/board/esd/wuh405/Makefile @@ -28,7 +28,9 @@ endif LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o ../common/misc.o +COBJS = $(BOARD).o flash.o \ + ../common/misc.o \ + ../common/esd405ep_nand.o \ SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/wuh405/wuh405.c b/board/esd/wuh405/wuh405.c index 5a1a3f3e8ee..0b530623517 100644 --- a/board/esd/wuh405/wuh405.c +++ b/board/esd/wuh405/wuh405.c @@ -169,12 +169,6 @@ int misc_init_r (void) out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */ udelay(1000); /* wait 1ms */ - /* - * Set NAND-FLASH GPIO signals to default - */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE); - /* * Enable interrupts in exar duart mcr[3] */ @@ -218,35 +212,8 @@ long int initdram (int board_type) mtdcr(memcfga, mem_mb0cf); val = mfdcr(memcfgd); -#if 0 - printf("\nmb0cf=%x\n", val); /* test-only */ - printf("strap=%x\n", mfdcr(strap)); /* test-only */ -#endif - return (4*1024*1024 << ((val & 0x000e0000) >> 17)); } /* ------------------------------------------------------------------------- */ -int testdram (void) -{ - /* TODO: XXX XXX XXX */ - printf ("test: 16 MB - ok\n"); - - return (0); -} - -/* ------------------------------------------------------------------------- */ - -#if (CONFIG_COMMANDS & CFG_CMD_NAND) -#include -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - nand_probe(CFG_NAND_BASE); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { - print_size(nand_dev_desc[0].totlen, "\n"); - } -} -#endif diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h index d03c05bf349..584f490680c 100644 --- a/include/configs/ASH405.h +++ b/include/configs/ASH405.h @@ -53,9 +53,13 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_NET_MULTI 1 +#undef CONFIG_HAS_ETH1 + #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ +#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */ #define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/ @@ -132,39 +136,16 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ +#define CFG_NAND_BASE_LIST { CFG_NAND_BASE } +#define NAND_MAX_CHIPS 1 +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_BIG_DELAY_US 25 -#define CFG_NAND_LEGACY - -#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 - -#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ -#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ -#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ - -#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);} while(0) -#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CE);} while(0) -#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_ALE);} while(0) -#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_ALE);} while(0) -#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CLE);} while(0) -#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CLE);} while(0) -#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CFG_NAND_RDY)) - -#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) -#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) +#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ +#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ +#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ +#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CONFIG_MTD_NAND_VERIFY_WRITE 1 /* verify all writes!!! */ #define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ /*----------------------------------------------------------------------- diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h index 1cca2859f4b..96952118c0f 100644 --- a/include/configs/CMS700.h +++ b/include/configs/CMS700.h @@ -81,8 +81,6 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include -#define CFG_NAND_LEGACY - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ @@ -148,34 +146,15 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ -#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 - -#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ -#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ -#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ - -#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);} while(0) -#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CE);} while(0) -#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_ALE);} while(0) -#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_ALE);} while(0) -#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CLE);} while(0) -#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CLE);} while(0) -#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CFG_NAND_RDY)) - -#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) -#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) +#define CFG_NAND_BASE_LIST { CFG_NAND_BASE } +#define NAND_MAX_CHIPS 1 +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_BIG_DELAY_US 25 + +#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ +#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ +#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ +#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ #define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ diff --git a/include/configs/HH405.h b/include/configs/HH405.h index dc40ebc861d..f36777a12d3 100644 --- a/include/configs/HH405.h +++ b/include/configs/HH405.h @@ -130,8 +130,6 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include -#define CFG_NAND_LEGACY - #undef CONFIG_BZIP2 /* include support for bzip2 compressed images */ #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -198,34 +196,15 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ -#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 - -#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ -#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ -#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ - -#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);} while(0) -#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CE);} while(0) -#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_ALE);} while(0) -#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_ALE);} while(0) -#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CLE);} while(0) -#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CLE);} while(0) -#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CFG_NAND_RDY)) - -#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) -#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) +#define CFG_NAND_BASE_LIST { CFG_NAND_BASE } +#define NAND_MAX_CHIPS 1 +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_BIG_DELAY_US 25 + +#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ +#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ +#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ +#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ #define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h index f84e356216b..88cc6a4820e 100644 --- a/include/configs/HUB405.h +++ b/include/configs/HUB405.h @@ -135,36 +135,15 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ -#define CFG_NAND_LEGACY - -#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 - -#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ -#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ -#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ - -#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);} while(0) -#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CE);} while(0) -#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_ALE);} while(0) -#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_ALE);} while(0) -#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CLE);} while(0) -#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CLE);} while(0) -#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CFG_NAND_RDY)) - -#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) -#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) +#define CFG_NAND_BASE_LIST { CFG_NAND_BASE } +#define NAND_MAX_CHIPS 1 +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_BIG_DELAY_US 25 + +#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ +#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ +#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ +#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ #define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h index d02c39b28f9..ef5ecba220f 100644 --- a/include/configs/PLU405.h +++ b/include/configs/PLU405.h @@ -81,7 +81,6 @@ #define CONFIG_SUPPORT_VFAT #define CONFIG_AUTO_UPDATE 1 /* autoupdate via compactflash */ -#define CONFIG_AUTO_UPDATE_SHOW 1 /* use board show routine */ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include @@ -156,36 +155,15 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ -#define CFG_NAND_LEGACY +#define CFG_NAND_BASE_LIST { CFG_NAND_BASE } +#define NAND_MAX_CHIPS 1 +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_BIG_DELAY_US 25 -#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 - -#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ -#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ -#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ - -#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);} while(0) -#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CE);} while(0) -#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_ALE);} while(0) -#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_ALE);} while(0) -#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CLE);} while(0) -#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CLE);} while(0) -#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CFG_NAND_RDY)) - -#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) -#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) +#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ +#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ +#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ +#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ #define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ @@ -264,11 +242,6 @@ #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ -#if 0 /* test-only */ -#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */ -#define CFG_JFFS2_NUM_BANKS 1 /* ! second bank contains U-Boot */ -#endif - /*----------------------------------------------------------------------- * Start addresses for the final memory configuration * (Set up by the startup code) @@ -294,9 +267,6 @@ #define CFG_ENV_SIZE 0x700 /* 2048 bytes may be used for env vars*/ /* total size of a CAT24WC16 is 2048 bytes */ -#define CFG_NVRAM_BASE_ADDR 0xF0000500 /* NVRAM base address */ -#define CFG_NVRAM_SIZE 242 /* NVRAM size */ - /*----------------------------------------------------------------------- * I2C EEPROM (CAT24WC16) for environment */ @@ -305,7 +275,7 @@ #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT24WC08 */ -#if 1 /* test-only */ + /* CAT24WC08/16... */ #define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ /* mask of address bits that overflow into the "EEPROM chip address" */ @@ -313,15 +283,6 @@ #define CFG_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */ /* 16 byte page write mode using*/ /* last 4 bits of the address */ -#else -/* CAT24WC32/64... */ -#define CFG_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */ -/* mask of address bits that overflow into the "EEPROM chip address" */ -#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x01 -#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* The Catalyst CAT24WC32 has */ - /* 32 byte page write mode using*/ - /* last 5 bits of the address */ -#endif #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ #define CFG_EEPROM_PAGE_WRITE_ENABLE diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h index 96f3d26cc5e..abd1ef43cad 100644 --- a/include/configs/VOH405.h +++ b/include/configs/VOH405.h @@ -141,36 +141,15 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ -#define CFG_NAND_LEGACY - -#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 - -#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ -#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ -#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ - -#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);} while(0) -#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CE);} while(0) -#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_ALE);} while(0) -#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_ALE);} while(0) -#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CLE);} while(0) -#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CLE);} while(0) -#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CFG_NAND_RDY)) - -#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) -#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) +#define CFG_NAND_BASE_LIST { CFG_NAND_BASE } +#define NAND_MAX_CHIPS 1 +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_BIG_DELAY_US 25 + +#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ +#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ +#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ +#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ #define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h index faf855d2492..52bff401af1 100644 --- a/include/configs/WUH405.h +++ b/include/configs/WUH405.h @@ -133,38 +133,16 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ -#define CFG_NAND_LEGACY - -#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 - -#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ -#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ -#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ - -#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);} while(0) -#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CE);} while(0) -#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_ALE);} while(0) -#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_ALE);} while(0) -#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CLE);} while(0) -#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CLE);} while(0) -#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CFG_NAND_RDY)) - -#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) -#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) - -#define CONFIG_MTD_NAND_VERIFY_WRITE 1 /* verify all writes!!! */ +#define CFG_NAND_BASE_LIST { CFG_NAND_BASE } +#define NAND_MAX_CHIPS 1 +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_BIG_DELAY_US 25 + +#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ +#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ +#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ +#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ + #define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ /*----------------------------------------------------------------------- -- cgit v1.3.1 From 0f92c7e7c9a62755b1457d3c46f93c8c1f6c19fc Mon Sep 17 00:00:00 2001 From: Matthias Fuchs Date: Mon, 9 Jul 2007 10:10:08 +0200 Subject: Migrate esd 405EP boards to new NAND subsystem Remove unused CFG_NAND_LEGACY define These boards to not have NAND. Signed-off-by: Matthias Fuchs --- include/configs/CPCI405.h | 2 -- include/configs/CPCI4052.h | 2 -- include/configs/CPCI405AB.h | 3 --- include/configs/CPCI405DT.h | 2 -- 4 files changed, 9 deletions(-) (limited to 'include/configs') diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h index 9acde1e6f03..9c0412932a0 100644 --- a/include/configs/CPCI405.h +++ b/include/configs/CPCI405.h @@ -83,8 +83,6 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include -#define CFG_NAND_LEGACY - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h index 3fc99c50244..2a328a63a37 100644 --- a/include/configs/CPCI4052.h +++ b/include/configs/CPCI4052.h @@ -105,8 +105,6 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include -#define CFG_NAND_LEGACY - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h index 4e2e1a834d8..69466862b7a 100644 --- a/include/configs/CPCI405AB.h +++ b/include/configs/CPCI405AB.h @@ -91,9 +91,6 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include -#define CFG_NAND_LEGACY - - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h index ab302df7437..4ae240e915a 100644 --- a/include/configs/CPCI405DT.h +++ b/include/configs/CPCI405DT.h @@ -102,8 +102,6 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include -#define CFG_NAND_LEGACY - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ -- cgit v1.3.1 From 48dbfeabc7afffe30609a4489f10c22cb67ef7dd Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 5 Jul 2007 22:39:07 -0500 Subject: Create new header file and move peripherals base address from configs file to new header file. Create new header file to include immap_5xxx.h and m5xxx.h and to share among drivers without update in driver file each processor is added. Moved peripherals base address and defines from configs file to immap.h. Signed-off-by: TsiChungLiew --- include/asm-m68k/immap.h | 57 ++++++++++++++++++++++++++++++++++++++++++++++ include/configs/M5329EVB.h | 46 +++++-------------------------------- 2 files changed, 63 insertions(+), 40 deletions(-) create mode 100644 include/asm-m68k/immap.h (limited to 'include/configs') diff --git a/include/asm-m68k/immap.h b/include/asm-m68k/immap.h new file mode 100644 index 00000000000..495459e833d --- /dev/null +++ b/include/asm-m68k/immap.h @@ -0,0 +1,57 @@ +/* + * ColdFire Internal Memory Map and Defines + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __IMMAP_H +#define __IMMAP_H + +#ifdef CONFIG_M5329 +#include +#include + +#define CFG_FEC0_IOBASE (MMAP_FEC) +#define CFG_UART_BASE (MMAP_UART0 + (CFG_UART_PORT * 0x4000)) +#define CFG_MCFRTC_BASE (MMAP_RTC) + +/* Timer */ +#ifdef CONFIG_MCFTMR +#define CFG_UDELAY_BASE (MMAP_DTMR0) +#define CFG_TMR_BASE (MMAP_DTMR1) +#define CFG_TMRINTR_NO (INT0_HI_DTMR1) +#define CFG_TMRINTR_MASK (INTC_IPRH_INT33) +#define CFG_TMRINTR_PRI (6) +#define CFG_TIMER_PRESCALER (((CFG_CLK / 1000000) - 1) << 8) +#endif + +#ifdef CONFIG_MCFPIT +#define CFG_UDELAY_BASE (MMAP_PIT0) +#define CFG_PIT_BASE (MMAP_PIT1) +#define CFG_PIT_PRESCALE (6) +#endif + +#define CFG_INTR_BASE (MMAP_INTC0) +#define CFG_NUM_IRQS (128) +#endif /* CONFIG_M5329 */ + +#endif /* __IMMAP_H */ diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index ac529dfbc29..c90773c5011 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -46,8 +46,6 @@ #undef CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ -#define CFG_NUM_IRQS 128 - #define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ CFG_CMD_CACHE | \ CFG_CMD_DATE | \ @@ -70,7 +68,6 @@ # define CFG_RX_ETH_BUFFER 8 # define CFG_FAULT_ECHO_LINK_DOWN -# define CFG_FEC0_IOBASE 0xFC030000 # define CFG_FEC0_PINMUX 0 # define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE # define MCFFEC_TOUT_LOOP 50000 @@ -86,41 +83,14 @@ #endif #define CONFIG_MCFUART -#ifdef CONFIG_MCFUART -# define CFG_UART_PORT (0) -# define CFG_UART_BASE (0xFC060000) -#endif +#define CFG_UART_PORT (0) #define CONFIG_MCFRTC -#ifdef CONFIG_MCFRTC -# define CFG_MCFRTC_BASE (0xFC0A8000) -# undef RTC_DEBUG -#endif +#undef RTC_DEBUG /* Timer */ #define CONFIG_MCFTMR -#ifdef CONFIG_MCFTMR -# define CFG_UDELAY_BASE (0xFC070000) -# define CFG_TMR_BASE (0xFC074000) -# define CFG_TMRINTR_NO (33) -# define CFG_TMRINTR_MASK (2) -# define CFG_TMRINTR_PRI (6) -# define CFG_TIMER_PRESCALER (((CFG_CLK / 1000000) - 1) << 8) -#endif - #undef CONFIG_MCFPIT -#ifdef CONFIG_MCFPIT -# define CFG_UDELAY_BASE (0xFC080000) -# define CFG_PIT_BASE (0xFC084000) -# define CFG_PIT_PRESCALE (6) -#endif - -#define CONFIG_MCFINTC -#ifdef CONFIG_MCFINTC -# define CFG_INTR_BASE (0xFC048000) -# define CFG_NUM_IRQ0 64 -# define CFG_NUM_IRQ1 64 -#endif /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include @@ -215,22 +185,18 @@ /*----------------------------------------------------------------------- * FLASH organization */ -#undef CFG_FLASH_CFI +#define CFG_FLASH_CFI #ifdef CFG_FLASH_CFI # define CFG_FLASH_CFI_DRIVER 1 # define CFG_FLASH_SIZE 0x800000 /* Max size that the board might have */ # define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT -#else -# define CFG_FLASH_UNLOCK_TOUT 1000 -# define CFG_FLASH_WRITE_TOUT 1000 +# define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +# define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ +# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ #endif #define CFG_FLASH_BASE 0 #define CFG_FLASH0_BASE (CFG_CS0_BASE << 16) -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ -#define CFG_FLASH_ERASE_TOUT 1000 -#define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash -- cgit v1.3.1 From 0dca874db62718e41253659e60f3a1de7eb418ce Mon Sep 17 00:00:00 2001 From: TsiChung Date: Tue, 10 Jul 2007 15:45:43 -0500 Subject: Cache update and added CFG_UNIFY_CACHE Enabled cache in cpu_init_f() for faster flash to mem allocation. Updated cache handling in start.S. Applied cache invalidate in fec_send() and fec_recv(). Added CFG_UNIFY_CACHE for CF V3 only. Signed-off-by: TsiChung --- cpu/mcf532x/cpu_init.c | 3 ++- cpu/mcf532x/start.S | 12 +++++------- drivers/net/mcffec.c | 26 ++++++++------------------ include/configs/M5329EVB.h | 26 ++++++++++++++------------ 4 files changed, 29 insertions(+), 38 deletions(-) (limited to 'include/configs') diff --git a/cpu/mcf532x/cpu_init.c b/cpu/mcf532x/cpu_init.c index b056fbe310f..32711a17443 100644 --- a/cpu/mcf532x/cpu_init.c +++ b/cpu/mcf532x/cpu_init.c @@ -113,6 +113,8 @@ void cpu_init_f(void) fbcs->cscr5 = CFG_CS5_CTRL; fbcs->csmr5 = CFG_CS5_MASK; #endif + + icache_enable(); } /* @@ -120,6 +122,5 @@ void cpu_init_f(void) */ int cpu_init_r(void) { - icache_enable(); return (0); } diff --git a/cpu/mcf532x/start.S b/cpu/mcf532x/start.S index acd34941a9b..ac44aaabec7 100644 --- a/cpu/mcf532x/start.S +++ b/cpu/mcf532x/start.S @@ -270,8 +270,6 @@ icache_enable: movec %d0, %CACR /* Invalidate cache */ move.l #(CFG_SDRAM_BASE + 0xc000), %d0 /* Setup cache mask */ movec %d0, %ACR0 /* Enable cache */ - move.l #(CFG_CS0_BASE + 0x0000), %d0 /* Setup cache mask */ - movec %d0, %ACR1 /* Enable cache */ move.l #0x80000200, %d0 /* Setup cache mask */ movec %d0, %CACR /* Enable cache */ @@ -284,11 +282,11 @@ icache_enable: .globl icache_disable icache_disable: - move.l #0x00000100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ + move.l #0x01000000, %d0 /* Setup cache mask */ + movec %d0, %CACR /* Disable cache */ clr.l %d0 /* Setup cache mask */ - movec %d0, %ACR0 /* Enable cache */ - movec %d0, %ACR1 /* Enable cache */ + movec %d0, %ACR0 + movec %d0, %ACR1 move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1 moveq #0, %d0 @@ -303,7 +301,7 @@ icache_status: .globl icache_invalid icache_invalid: - move.l #0x01000000, %d0 /* Setup cache mask */ + move.l #0x81000200, %d0 /* Setup cache mask */ movec %d0, %CACR /* Enable cache */ rts diff --git a/drivers/net/mcffec.c b/drivers/net/mcffec.c index 609210de19e..11f67218972 100644 --- a/drivers/net/mcffec.c +++ b/drivers/net/mcffec.c @@ -150,23 +150,15 @@ int fec_send(struct eth_device *dev, volatile void *packet, int length) * Wait for ready */ j = 0; -#if (CONFIG_COMMANDS & CFG_CMD_CACHE) - icache_invalid(); -#endif while ((info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_READY) && (j < MCFFEC_TOUT_LOOP)) { udelay(1); j++; -#if (CONFIG_COMMANDS & CFG_CMD_CACHE) - icache_invalid(); -#endif } if (j >= MCFFEC_TOUT_LOOP) { printf("TX not ready\n"); } -#if (CONFIG_COMMANDS & CFG_CMD_CACHE) - icache_invalid(); -#endif + info->txbd[info->txIdx].cbd_bufaddr = (uint) packet; info->txbd[info->txIdx].cbd_datlen = length; info->txbd[info->txIdx].cbd_sc |= BD_ENET_TX_RDY_LST; @@ -174,21 +166,19 @@ int fec_send(struct eth_device *dev, volatile void *packet, int length) /* Activate transmit Buffer Descriptor polling */ fecp->tdar = 0x01000000; /* Descriptor polling active */ - j = 0; -#if (CONFIG_COMMANDS & CFG_CMD_CACHE) +#ifdef CFG_UNIFY_CACHE icache_invalid(); #endif + j = 0; while ((info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_READY) && (j < MCFFEC_TOUT_LOOP)) { udelay(1); j++; -#if (CONFIG_COMMANDS & CFG_CMD_CACHE) - icache_invalid(); -#endif } if (j >= MCFFEC_TOUT_LOOP) { printf("TX timeout\n"); } + #ifdef ET_DEBUG printf("%s[%d] %s: cycles: %d status: %x retry cnt: %d\n", __FILE__, __LINE__, __FUNCTION__, j, @@ -196,10 +186,7 @@ int fec_send(struct eth_device *dev, volatile void *packet, int length) (info->txbd[info->txIdx].cbd_sc & 0x003C) >> 2); #endif - /* return only status bits */ ; -#if (CONFIG_COMMANDS & CFG_CMD_CACHE) - icache_invalid(); -#endif + /* return only status bits */ rc = (info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_STATS); info->txIdx = (info->txIdx + 1) % TX_BUF_CNT; @@ -213,6 +200,9 @@ int fec_recv(struct eth_device *dev) int length; for (;;) { +#ifdef CFG_UNIFY_CACHE + icache_invalid(); +#endif /* section 16.9.23.2 */ if (info->rxbd[info->rxIdx].cbd_sc & BD_ENET_RX_EMPTY) { length = -1; diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index c90773c5011..d1ac3400481 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -47,18 +47,20 @@ #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ #define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_CACHE | \ - CFG_CMD_DATE | \ - CFG_CMD_ELF | \ - CFG_CMD_FLASH | \ - (CFG_CMD_LOADB | CFG_CMD_LOADS) | \ - CFG_CMD_MEMORY | \ - CFG_CMD_MISC | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO \ - ) + CFG_CMD_CACHE | \ + CFG_CMD_DATE | \ + CFG_CMD_ELF | \ + CFG_CMD_FLASH | \ + (CFG_CMD_LOADB | CFG_CMD_LOADS) | \ + CFG_CMD_MEMORY | \ + CFG_CMD_MISC | \ + CFG_CMD_MII | \ + CFG_CMD_NET | \ + CFG_CMD_PING | \ + CFG_CMD_REGINFO \ + ) + +#define CFG_UNIFY_CACHE #define CONFIG_MCFFEC #ifdef CONFIG_MCFFEC -- cgit v1.3.1 From 2a49fc17d09020e7ebd9536694d99d20e419fcb8 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 16 Jul 2007 10:01:38 +0200 Subject: ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup Signed-off-by: Stefan Roese --- board/amcc/luan/luan.c | 7 +++++++ include/configs/luan.h | 1 - 2 files changed, 7 insertions(+), 1 deletion(-) (limited to 'include/configs') diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c index 2eff3b33fde..7b16f8a39ac 100644 --- a/board/amcc/luan/luan.c +++ b/board/amcc/luan/luan.c @@ -104,6 +104,13 @@ int checkboard(void) return 0; } +/* + * Override the default functions in cpu/ppc4xx/44x_spd_ddr2.c with + * board specific values. + */ +u32 ddr_clktr(u32 default_val) { + return (SDRAM_CLKTR_CLKP_180_DEG_ADV); +} /************************************************************************* * int testdram() diff --git a/include/configs/luan.h b/include/configs/luan.h index cbb59c50eaf..e192d069233 100644 --- a/include/configs/luan.h +++ b/include/configs/luan.h @@ -136,7 +136,6 @@ #define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ #define SPD_EEPROM_ADDRESS {0x53, 0x52} /* SPD i2c spd addresses*/ #define CONFIG_DDR_ECC 1 /* with ECC support */ -#define CFG_44x_DDR2_CKTR_180 1 /* use 180 deg advance */ /*----------------------------------------------------------------------- * I2C -- cgit v1.3.1 From 531e3e8b831f357056448fa573137d5fb37000fd Mon Sep 17 00:00:00 2001 From: Pavel Kolesnikov Date: Fri, 20 Jul 2007 15:03:03 +0200 Subject: POST: Add ECC POST for the lwmon5 board This patch adds ECC Post test for the Lwmon5 board based on PPC440EPx to U-Boot. Signed-off-by: Pavel Kolesnikov Acked-by: Yuri Tikhonov Acked-by: Stefan Roese --- board/lwmon5/lwmon5.c | 11 ++ include/configs/lwmon5.h | 8 +- include/post.h | 1 + post/board/lwmon5/Makefile | 29 +++++ post/board/lwmon5/ecc.c | 257 +++++++++++++++++++++++++++++++++++++++++++++ post/tests.c | 13 +++ 6 files changed, 318 insertions(+), 1 deletion(-) create mode 100644 post/board/lwmon5/Makefile create mode 100644 post/board/lwmon5/ecc.c (limited to 'include/configs') diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c index d916284753d..b7dbba3e8e6 100644 --- a/board/lwmon5/lwmon5.c +++ b/board/lwmon5/lwmon5.c @@ -463,3 +463,14 @@ void hw_watchdog_reset(void) val = gpio_read_out_bit(CFG_GPIO_WATCHDOG) == 0 ? 1 : 0; gpio_write_bit(CFG_GPIO_WATCHDOG, val); } + +#ifdef CONFIG_POST +/* + * Returns 1 if keys pressed to start the power-on long-running tests + * Called from board_init_f(). + */ +int post_hotkeys_pressed(void) +{ + return (ctrlc()); +} +#endif diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index c4b7c4ee504..36ead230162 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -74,11 +74,13 @@ /* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */ #define CFG_INIT_RAM_OCM 1 /* OCM as init ram */ #define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */ +#define CFG_OCM_DATA_ADDR CFG_OCM_BASE #define CFG_INIT_RAM_END (4 << 10) #define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4) +#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR /*----------------------------------------------------------------------- * Serial Port @@ -133,6 +135,10 @@ #define CONFIG_DDR_DATA_EYE 1 /* use DDR2 optimization */ #if 0 /* test-only: disable ECC for now */ #define CONFIG_DDR_ECC 1 /* enable ECC */ + +/* POST support */ +#define CONFIG_POST (CFG_POST_ECC) + #endif /*----------------------------------------------------------------------- diff --git a/include/post.h b/include/post.h index 8259e5d2ea6..c8062bbbc17 100644 --- a/include/post.h +++ b/include/post.h @@ -92,6 +92,7 @@ extern int post_hotkeys_pressed(void); #define CFG_POST_DSP 0x00001000 #define CFG_POST_CODEC 0x00002000 #define CFG_POST_FPU 0x00004000 +#define CFG_POST_ECC 0x00008000 #endif /* CONFIG_POST */ diff --git a/post/board/lwmon5/Makefile b/post/board/lwmon5/Makefile new file mode 100644 index 00000000000..c3f54e37b8c --- /dev/null +++ b/post/board/lwmon5/Makefile @@ -0,0 +1,29 @@ +# +# (C) Copyright 2002-2007 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + + +LIB = libpostlwmon5.a + +COBJS = ecc.o + +include $(TOPDIR)/post/rules.mk diff --git a/post/board/lwmon5/ecc.c b/post/board/lwmon5/ecc.c new file mode 100644 index 00000000000..7f04f9abed9 --- /dev/null +++ b/post/board/lwmon5/ecc.c @@ -0,0 +1,257 @@ +/* + * (C) Copyright 2007 + * Developed for DENX Software Engineering GmbH. + * + * Author: Pavel Kolesnikov + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* define DEBUG for debugging output (obviously ;-)) */ +#if 0 +#define DEBUG +#endif + +#include +#include + +#ifdef CONFIG_POST + +#include + +#if CONFIG_POST & CFG_POST_ECC + +/* + * MEMORY ECC test + * + * This test performs the checks ECC facility of memory. + */ +#include +#include +#include +#include + +#include "../../../board/lwmon5/sdram.h" + +DECLARE_GLOBAL_DATA_PTR; + +const static unsigned char syndrome_codes[] = { + 0xF4, 0XF1, 0XEC ,0XEA, 0XE9, 0XE6, 0XE5, 0XE3, + 0XDC, 0XDA, 0XD9, 0XD6, 0XD5, 0XD3, 0XCE, 0XCB, + 0xB5, 0XB0, 0XAD, 0XAB, 0XA8, 0XA7, 0XA4, 0XA2, + 0X9D, 0X9B, 0X98, 0X97, 0X94, 0X92, 0X8F, 0X8A, + 0x75, 0x70, 0X6D, 0X6B, 0X68, 0X67, 0X64, 0X62, + 0X5E, 0X5B, 0X58, 0X57, 0X54, 0X52, 0X4F, 0X4A, + 0x34, 0x31, 0X2C, 0X2A, 0X29, 0X26, 0X25, 0X23, + 0X1C, 0X1A, 0X19, 0X16, 0X15, 0X13, 0X0E, 0X0B, + 0x80, 0x40, 0x20, 0x10, 0x08, 0x04, 0x02, 0x01 +}; + +#define ECC_START_ADDR 0x10 +#define ECC_STOP_ADDR 0x2000 +#define ECC_PATTERN 0x0101010101010101ull +#define ECC_PATTERN_CORR 0x0101010101010100ull +#define ECC_PATTERN_UNCORR 0x010101010101010Full + +static int test_ecc_error(void) +{ + unsigned long value; + unsigned long hdata, ldata, haddr, laddr; + unsigned int bit; + + int ret = 0; + + mfsdram(DDR0_23, value); + + for (bit = 0; bit < sizeof(syndrome_codes); bit++) + if (syndrome_codes[bit] == ((value >> 16) & 0xff)) + break; + + mfsdram(DDR0_00, value); + + if (value & DDR0_00_INT_STATUS_BIT0) { + debug("Bit0. A single access outside the defined PHYSICAL" + " memory space detected\n"); + mfsdram(DDR0_32, laddr); + mfsdram(DDR0_33, haddr); + debug(" addr = 0x%08x%08x\n", haddr, laddr); + ret = 1; + } + if (value & DDR0_00_INT_STATUS_BIT1) { + debug("Bit1. Multiple accesses outside the defined PHYSICAL" + " memory space detected\n"); + ret = 2; + } + if (value & DDR0_00_INT_STATUS_BIT2) { + debug("Bit2. Single correctable ECC event detected\n"); + mfsdram(DDR0_38, laddr); + mfsdram(DDR0_39, haddr); + mfsdram(DDR0_40, ldata); + mfsdram(DDR0_41, hdata); + debug(" 0x%08x - 0x%08x%08x, bit - %d\n", + laddr, hdata, ldata, bit); + ret = 3; + } + if (value & DDR0_00_INT_STATUS_BIT3) { + debug("Bit3. Multiple correctable ECC events detected\n"); + mfsdram(DDR0_38, laddr); + mfsdram(DDR0_39, haddr); + mfsdram(DDR0_40, ldata); + mfsdram(DDR0_41, hdata); + debug(" 0x%08x - 0x%08x%08x, bit - %d\n", + laddr, hdata, ldata, bit); + ret = 4; + } + if (value & DDR0_00_INT_STATUS_BIT4) { + debug("Bit4. Single uncorrectable ECC event detected\n"); + mfsdram(DDR0_34, laddr); + mfsdram(DDR0_35, haddr); + mfsdram(DDR0_36, ldata); + mfsdram(DDR0_37, hdata); + debug(" 0x%08x - 0x%08x%08x, bit - %d\n", + laddr, hdata, ldata, bit); + ret = 5; + } + if (value & DDR0_00_INT_STATUS_BIT5) { + debug("Bit5. Multiple uncorrectable ECC events detected\n"); + mfsdram(DDR0_34, laddr); + mfsdram(DDR0_35, haddr); + mfsdram(DDR0_36, ldata); + mfsdram(DDR0_37, hdata); + debug(" 0x%08x - 0x%08x%08x, bit - %d\n", + laddr, hdata, ldata, bit); + ret = 6; + } + if (value & DDR0_00_INT_STATUS_BIT6) { + debug("Bit6. DRAM initialization complete\n"); + ret = 7; + } + + /* error status cleared */ + mfsdram(DDR0_00, value); + mtsdram(DDR0_00, value | DDR0_00_INT_ACK_ALL); + + return ret; +} + +static int test_ecc(unsigned long ecc_addr) +{ + volatile unsigned long long *ecc_mem; + unsigned long value; + unsigned long ecc_data; + volatile unsigned long *lecc_mem; + int pret, ret = 0; + + sync(); + eieio(); + WATCHDOG_RESET(); + + ecc_mem = (unsigned long long *)ecc_addr; + lecc_mem = (ulong *)ecc_addr; + *ecc_mem = ECC_PATTERN; + pret = test_ecc_error(); + if (pret != 0) + ret = 1; + + /* disconnect ecc */ + mfsdram(DDR0_22, value); + mtsdram(DDR0_22, (value &~ DDR0_22_CTRL_RAW_MASK) + | DDR0_22_CTRL_RAW_ECC_DISABLE); + + /* injecting error */ + *ecc_mem = ECC_PATTERN_CORR; + + /* enable ecc */ + mfsdram(DDR0_22, value); + mtsdram(DDR0_22, (value &~ DDR0_22_CTRL_RAW_MASK) + | DDR0_22_CTRL_RAW_ECC_ENABLE); + + ecc_data = *lecc_mem; + pret = test_ecc_error(); + /* if read data ok, 1 correctable error must be fixed */ + if (pret != 3) + ret = 1; + + /* test for uncorrectable error */ + /* disconnect from ecc storage */ + mfsdram(DDR0_22, value); + mtsdram(DDR0_22, (value &~ DDR0_22_CTRL_RAW_MASK) + | DDR0_22_CTRL_RAW_NO_ECC_RAM); + + /* injecting multiply bit error */ + + *ecc_mem = ECC_PATTERN_UNCORR; + + /* enable ecc */ + mfsdram(DDR0_22, value); + mtsdram(DDR0_22, (value &~ DDR0_22_CTRL_RAW_MASK) + | DDR0_22_CTRL_RAW_ECC_ENABLE); + + ecc_data = *lecc_mem; + /* what the data should be read? */ + + pret = test_ecc_error(); + /* info about uncorrectable error must appear */ + if (pret != 5) + ret = 1; + + sync(); + eieio(); + + return ret; +} + +int ecc_post_test (int flags) +{ + int ret = 0; + unsigned long value; + unsigned long iaddr; + +#if CONFIG_DDR_ECC + sync(); + eieio(); + + /* mask all int */ + mfsdram(DDR0_01, value); + mtsdram(DDR0_01, (value &~ DDR0_01_INT_MASK_MASK) + | DDR0_01_INT_MASK_ALL_OFF); + + /* clear error status */ + mfsdram(DDR0_00, value); + mtsdram(DDR0_00, value | DDR0_00_INT_ACK_ALL); + + + /* enable full support of ECC */ + mfsdram(DDR0_22, value); + mtsdram(DDR0_22, (value &~ DDR0_22_CTRL_RAW_MASK) + | DDR0_22_CTRL_RAW_ECC_ENABLE); + + for (iaddr = ECC_START_ADDR; iaddr < ECC_STOP_ADDR; iaddr += iaddr) { + ret = test_ecc(iaddr); + if (ret) + break; + } +#endif + + return ret; + +} + +#endif /* CONFIG_POST & CFG_POST_ECC */ +#endif /* CONFIG_POST */ diff --git a/post/tests.c b/post/tests.c index f3604b24934..e1c3d28f5bd 100644 --- a/post/tests.c +++ b/post/tests.c @@ -46,6 +46,7 @@ extern int spr_post_test (int flags); extern int sysmon_post_test (int flags); extern int dsp_post_test (int flags); extern int codec_post_test (int flags); +extern int ecc_post_test (int flags); extern int sysmon_init_f (void); @@ -236,6 +237,18 @@ struct post_test post_list[] = CFG_POST_CODEC }, #endif +#if CONFIG_POST & CFG_POST_ECC + { + "ECC test", + "ecc", + "This test checks ECC facility of memory.", + POST_ROM | POST_ALWAYS, + &ecc_post_test, + NULL, + NULL, + CFG_POST_ECC + }, +#endif }; unsigned int post_list_size = sizeof (post_list) / sizeof (struct post_test); -- cgit v1.3.1 From 9f24a808f17fc0f37b7fb4805f734741335caecc Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 24 Jul 2007 09:52:52 +0200 Subject: ppc4xx: lwmon5: Support for 128 MByte NOR FLASH added The used Intel NOR FLASH chips have internally two dies, and are now treated as two seperate chips. Signed-off-by: Stefan Roese --- board/lwmon5/lwmon5.c | 4 ++-- include/configs/lwmon5.h | 10 ++++++---- 2 files changed, 8 insertions(+), 6 deletions(-) (limited to 'include/configs') diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c index 5c4cf9d2541..66cef2fdd68 100644 --- a/board/lwmon5/lwmon5.c +++ b/board/lwmon5/lwmon5.c @@ -158,13 +158,13 @@ int misc_init_r(void) (void)flash_protect(FLAG_PROTECT_SET, -CFG_MONITOR_LEN, 0xffffffff, - &flash_info[0]); + &flash_info[1]); /* Env protection ON by default */ (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND, CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1, - &flash_info[0]); + &flash_info[1]); /* * USB suff... diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 36ead230162..55e2c94d6d6 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -46,7 +46,7 @@ #define CFG_BOOT_BASE_ADDR 0xf0000000 #define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ -#define CFG_FLASH_BASE 0xfc000000 /* start of FLASH */ +#define CFG_FLASH_BASE 0xf8000000 /* start of FLASH */ #define CFG_MONITOR_BASE TEXT_BASE #define CFG_LIME_BASE_0 0xc0000000 #define CFG_LIME_BASE_1 0xc1000000 @@ -105,9 +105,11 @@ #define CFG_FLASH_CFI /* The flash is CFI compatible */ #define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ -#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#define CFG_FLASH0 0xFC000000 +#define CFG_FLASH1 0xF8000000 +#define CFG_FLASH_BANKS_LIST { CFG_FLASH1, CFG_FLASH0 } -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ #define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ @@ -319,7 +321,7 @@ /* Memory Bank 0 (NOR-FLASH) initialization */ #define CFG_EBC_PB0AP 0x03050200 -#define CFG_EBC_PB0CR (CFG_FLASH | 0xdc000) +#define CFG_EBC_PB0CR (CFG_FLASH | 0xfc000) /* Memory Bank 1 (Lime) initialization */ #define CFG_EBC_PB1AP 0x01004380 -- cgit v1.3.1 From b66091de6c7390620312c2501db23d8391e7cabb Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Thu, 26 Jul 2007 15:08:01 +0200 Subject: ppc4xx: lwmon5: Update Lime initialization Change Lime SDRAM initialization to now support 100MHz and 133MHz (if enabled). Also the framebuffer is initialized to display a blue rectangle with a white border. Signed-off-by: Anatolij Gustschin Signed-off-by: Stefan Roese --- board/lwmon5/lwmon5.c | 62 ++++++++++++++++++++++++++++++++++++++++++++++-- include/configs/lwmon5.h | 16 ++++++++++--- 2 files changed, 73 insertions(+), 5 deletions(-) (limited to 'include/configs') diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c index 66cef2fdd68..830ec1911f6 100644 --- a/board/lwmon5/lwmon5.c +++ b/board/lwmon5/lwmon5.c @@ -221,8 +221,8 @@ int misc_init_r(void) udelay(500); gpio_write_bit(CFG_GPIO_LIME_RST, 1); - /* Lime memory clock adjusted to 133MHz */ - out_be32((void *)CFG_LIME_SDRAM_CLOCK, CFG_LIME_CLOCK_133MHZ); + /* Lime memory clock adjusted to 100MHz */ + out_be32((void *)CFG_LIME_SDRAM_CLOCK, CFG_LIME_CLOCK_100MHZ); /* Wait untill time expired. Because of requirements in lime manual */ udelay(300); /* Write lime controller memory parameters */ @@ -237,6 +237,64 @@ int misc_init_r(void) gpio_write_bit(CFG_GPIO_PHY0_RST, 1); gpio_write_bit(CFG_GPIO_PHY1_RST, 1); + /* + * Init display controller + */ + /* Setup dot clock (internal PLL, division rate 1/16) */ + out_be32((void *)0xc1fd0100, 0x00000f00); + + /* Lime L0 init (16 bpp, 640x480) */ + out_be32((void *)0xc1fd0020, 0x801401df); + out_be32((void *)0xc1fd0024, 0x0); + out_be32((void *)0xc1fd0028, 0x0); + out_be32((void *)0xc1fd002c, 0x0); + out_be32((void *)0xc1fd0110, 0x0); + out_be32((void *)0xc1fd0114, 0x0); + out_be32((void *)0xc1fd0118, 0x01df0280); + + /* Display timing init */ + out_be32((void *)0xc1fd0004, 0x031f0000); + out_be32((void *)0xc1fd0008, 0x027f027f); + out_be32((void *)0xc1fd000c, 0x015f028f); + out_be32((void *)0xc1fd0010, 0x020c0000); + out_be32((void *)0xc1fd0014, 0x01df01ea); + out_be32((void *)0xc1fd0018, 0x0); + out_be32((void *)0xc1fd001c, 0x01e00280); + +#if 1 + /* + * Clear framebuffer using Lime's drawing engine + * (draw blue rect. with white border around it) + */ + /* Setup mode and fbbase, xres, fg, bg */ + out_be32((void *)0xc1ff0420, 0x8300); + out_be32((void *)0xc1ff0440, 0x0000); + out_be32((void *)0xc1ff0444, 0x0280); + out_be32((void *)0xc1ff0480, 0x7fff); + out_be32((void *)0xc1ff0484, 0x0000); + /* Reset clipping rectangle */ + out_be32((void *)0xc1ff0454, 0x0000); + out_be32((void *)0xc1ff0458, 0x0280); + out_be32((void *)0xc1ff045c, 0x0000); + out_be32((void *)0xc1ff0460, 0x01e0); + /* Draw white rect. */ + out_be32((void *)0xc1ff04a0, 0x09410000); + out_be32((void *)0xc1ff04a0, 0x00000000); + out_be32((void *)0xc1ff04a0, 0x01e00280); + udelay(2000); + /* Draw blue rect. */ + out_be32((void *)0xc1ff0480, 0x001f); + out_be32((void *)0xc1ff04a0, 0x09410000); + out_be32((void *)0xc1ff04a0, 0x00010001); + out_be32((void *)0xc1ff04a0, 0x01de027e); +#endif + /* Display enable, L0 layer */ + out_be32((void *)0xc1fd0100, 0x80010f00); + + /* TFT-LCD enable - PWM duty, lamp on */ + out_be32((void *)0xc4000024, 0x64); + out_be32((void *)0xc4000020, 0x701); + return 0; } diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 55e2c94d6d6..b09b47830a4 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -341,14 +341,24 @@ * Graphics (Fujitsu Lime) *----------------------------------------------------------------------*/ /* SDRAM Clock frequency adjustment register */ -#define CFG_LIME_SDRAM_CLOCK 0xC1FC0000 -/* Lime Clock frequency is to set 133MHz */ +#define CFG_LIME_SDRAM_CLOCK 0xC1FC0038 +/* Lime Clock frequency is to set 100MHz */ +#define CFG_LIME_CLOCK_100MHZ 0x00000 +#if 0 +/* Lime Clock frequency for 133MHz */ #define CFG_LIME_CLOCK_133MHZ 0x10000 +#endif /* SDRAM Parameter register */ #define CFG_LIME_MMR 0xC1FCFFFC -/* SDRAM parameter value */ +/* SDRAM parameter value; was 0x414FB7F2, caused several vertical bars + and pixel flare on display when 133MHz was configured. According to + SDRAM chip datasheet CAS Latency is 3 for 133MHz and -75 Speed Grade */ +#ifdef CFG_LIME_CLOCK_133MHZ +#define CFG_LIME_MMR_VALUE 0x414FB7F3 +#else #define CFG_LIME_MMR_VALUE 0x414FB7F2 +#endif /*----------------------------------------------------------------------- * GPIO Setup -- cgit v1.3.1 From d4024bb72dd81695ec099b2199eda0d27c623e62 Mon Sep 17 00:00:00 2001 From: John Otken Date: Thu, 26 Jul 2007 17:49:11 +0200 Subject: ppc4xx: Add support for AMCC 405EP Taihu board Signed-off-by: John Otken --- MAINTAINERS | 1 + MAKEALL | 8 +- Makefile | 3 + board/amcc/taihu/Makefile | 49 ++ board/amcc/taihu/config.mk | 24 + board/amcc/taihu/flash.c | 1083 +++++++++++++++++++++++++++++++++++++++++++ board/amcc/taihu/lcd.c | 257 ++++++++++ board/amcc/taihu/taihu.c | 234 ++++++++++ board/amcc/taihu/u-boot.lds | 150 ++++++ board/amcc/taihu/update.c | 132 ++++++ common/soft_spi.c | 2 + cpu/ppc4xx/gpio.c | 2 + cpu/ppc4xx/sdram.c | 11 +- cpu/ppc4xx/start.S | 33 ++ dtt/Makefile | 2 +- dtt/ds1775.c | 156 +++++++ include/configs/taihu.h | 473 +++++++++++++++++++ include/dtt.h | 8 + 18 files changed, 2622 insertions(+), 6 deletions(-) create mode 100644 board/amcc/taihu/Makefile create mode 100644 board/amcc/taihu/config.mk create mode 100644 board/amcc/taihu/flash.c create mode 100644 board/amcc/taihu/lcd.c create mode 100644 board/amcc/taihu/taihu.c create mode 100644 board/amcc/taihu/u-boot.lds create mode 100644 board/amcc/taihu/update.c create mode 100644 dtt/ds1775.c create mode 100644 include/configs/taihu.h (limited to 'include/configs') diff --git a/MAINTAINERS b/MAINTAINERS index 693b1157290..6dd43f86195 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -248,6 +248,7 @@ Tolunay Orkun John Otken luan PPC440SP + taihu PPC405EP Keith Outwater diff --git a/MAKEALL b/MAKEALL index 127faa83a32..f69134a63ea 100755 --- a/MAKEALL +++ b/MAKEALL @@ -88,10 +88,10 @@ LIST_4xx=" \ ml300 ocotea OCRTC ORSG \ p3p440 PCI405 pcs440ep PIP405 \ PLU405 PMC405 PPChameleonEVB sbc405 \ - sc3 sequoia sequoia_nand taishan \ - VOH405 VOM405 W7OLMC W7OLMG \ - walnut WUH405 XPEDITE1K yellowstone \ - yosemite yucca \ + sc3 sequoia sequoia_nand taihu \ + taishan VOH405 VOM405 W7OLMC \ + W7OLMG walnut WUH405 XPEDITE1K \ + yellowstone yosemite yucca \ " ######################################################################### diff --git a/Makefile b/Makefile index 3af9962e678..d4fd34e43f9 100644 --- a/Makefile +++ b/Makefile @@ -1254,6 +1254,9 @@ rainier_nand_config: unconfig sc3_config:unconfig @./mkconfig $(@:_config=) ppc ppc4xx sc3 +taihu_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc ppc4xx taihu amcc + taishan_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc diff --git a/board/amcc/taihu/Makefile b/board/amcc/taihu/Makefile new file mode 100644 index 00000000000..9731c6e332a --- /dev/null +++ b/board/amcc/taihu/Makefile @@ -0,0 +1,49 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o flash.o lcd.o update.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/amcc/taihu/config.mk b/board/amcc/taihu/config.mk new file mode 100644 index 00000000000..1bdf5e4fcf3 --- /dev/null +++ b/board/amcc/taihu/config.mk @@ -0,0 +1,24 @@ +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0xFFFC0000 diff --git a/board/amcc/taihu/flash.c b/board/amcc/taihu/flash.c new file mode 100644 index 00000000000..290259e73f9 --- /dev/null +++ b/board/amcc/taihu/flash.c @@ -0,0 +1,1083 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Modified 4/5/2001 + * Wait for completion of each sector erase command issued + * 4/5/2001 + * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com + */ + +#include +#include +#include + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ + +#undef DEBUG +#ifdef DEBUG +#define DEBUGF(x...) printf(x) +#else +#define DEBUGF(x...) +#endif /* DEBUG */ + +#define CFG_FLASH_CHAR_SIZE unsigned char +#define CFG_FLASH_CHAR_ADDR0 (0x0aaa) +#define CFG_FLASH_CHAR_ADDR1 (0x0555) +/*----------------------------------------------------------------------- + * Functions + */ +static ulong flash_get_size(vu_long * addr, flash_info_t * info); +static void flash_get_offsets(ulong base, flash_info_t * info); +static int write_word(flash_info_t * info, ulong dest, ulong data); +#ifdef FLASH_BASE1_PRELIM +static int write_word_1(flash_info_t * info, ulong dest, ulong data); +static int write_word_2(flash_info_t * info, ulong dest, ulong data); +static int flash_erase_1(flash_info_t * info, int s_first, int s_last); +static int flash_erase_2(flash_info_t * info, int s_first, int s_last); +static ulong flash_get_size_1(vu_long * addr, flash_info_t * info); +static ulong flash_get_size_2(vu_long * addr, flash_info_t * info); +#endif + +unsigned long flash_init(void) +{ + unsigned long size_b0, size_b1=0; + int i; + + /* Init: no FLASHes known */ + for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) { + flash_info[i].flash_id = FLASH_UNKNOWN; + } + + /* Static FLASH Bank configuration here - FIXME XXX */ + + size_b0 = + flash_get_size((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]); + + if (flash_info[0].flash_id == FLASH_UNKNOWN) { + printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", + size_b0, size_b0 << 20); + } + + if (size_b0) { + /* Setup offsets */ + flash_get_offsets(FLASH_BASE0_PRELIM, &flash_info[0]); + /* Monitor protection ON by default */ + (void)flash_protect(FLAG_PROTECT_SET, + CFG_MONITOR_BASE, + CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1, + &flash_info[0]); +#ifdef CFG_ENV_IS_IN_FLASH + (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR, + CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1, + &flash_info[0]); + (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND, + CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1, + &flash_info[0]); +#endif + /* Also protect sector containing initial power-up instruction */ + /* (flash_protect() checks address range - other call ignored) */ + (void)flash_protect(FLAG_PROTECT_SET, + 0xFFFFFFFC, 0xFFFFFFFF, &flash_info[0]); + + flash_info[0].size = size_b0; + } +#ifdef FLASH_BASE1_PRELIM + size_b1 = + flash_get_size((vu_long *) FLASH_BASE1_PRELIM, &flash_info[1])*2; + + if (flash_info[1].flash_id == FLASH_UNKNOWN) { + printf("## Unknown FLASH on Bank 1 - Size = 0x%08lx = %ld MB\n", + size_b1, size_b1 << 20); + } + + if (size_b1) { + /* Setup offsets */ + flash_get_offsets(FLASH_BASE1_PRELIM, &flash_info[1]); + flash_info[1].size = size_b1; + } +#endif + return (size_b0 + size_b1); +} + +static void flash_get_offsets(ulong base, flash_info_t * info) +{ + int i; + + /* set up sector start address table */ + if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) || + (info->flash_id == FLASH_AM040)) { + for (i = 0; i < info->sector_count; i++) + info->start[i] = base + (i * 0x00010000); + } else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMLV128U) { + for (i = 0; i < info->sector_count; i++) { + info->start[i] = base + (i * 0x00010000*2); + } + } else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_S29GL128N ) { + for (i = 0; i < info->sector_count; i++) { + info->start[i] = base + (i * 0x00020000*2); + } + } else { + if (info->flash_id & FLASH_BTYPE) { + /* set sector offsets for bottom boot block type */ + info->start[0] = base + 0x00000000; + info->start[1] = base + 0x00004000; + info->start[2] = base + 0x00006000; + info->start[3] = base + 0x00008000; + for (i = 4; i < info->sector_count; i++) { + info->start[i] = + base + (i * 0x00010000) - 0x00030000; + } + } else { + /* set sector offsets for top boot block type */ + i = info->sector_count - 1; + info->start[i--] = base + info->size - 0x00004000; + info->start[i--] = base + info->size - 0x00006000; + info->start[i--] = base + info->size - 0x00008000; + for (; i >= 0; i--) { + info->start[i] = base + i * 0x00010000; + } + } + } +} + + +void flash_print_info(flash_info_t * info) +{ + int i; + int k; + int size; + int erased; + volatile unsigned long *flash; + + if (info->flash_id == FLASH_UNKNOWN) { + printf("missing or unknown FLASH type\n"); + return; + } + + switch (info->flash_id & FLASH_VENDMASK) { + case FLASH_MAN_AMD: + printf("AMD "); + break; + case FLASH_MAN_STM: + printf("STM "); + break; + case FLASH_MAN_FUJ: + printf("FUJITSU "); + break; + case FLASH_MAN_SST: + printf("SST "); + break; + default: + printf("Unknown Vendor "); + break; + } + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_AM040: + printf("AM29F040 (512 Kbit, uniform sector size)\n"); + break; + case FLASH_AM400B: + printf("AM29LV400B (4 Mbit, bottom boot sect)\n"); + break; + case FLASH_AM400T: + printf("AM29LV400T (4 Mbit, top boot sector)\n"); + break; + case FLASH_AM800B: + printf("AM29LV800B (8 Mbit, bottom boot sect)\n"); + break; + case FLASH_AM800T: + printf("AM29LV800T (8 Mbit, top boot sector)\n"); + break; + case FLASH_AMD016: + printf("AM29F016D (16 Mbit, uniform sector size)\n"); + break; + case FLASH_AM160B: + printf("AM29LV160B (16 Mbit, bottom boot sect)\n"); + break; + case FLASH_AM160T: + printf("AM29LV160T (16 Mbit, top boot sector)\n"); + break; + case FLASH_AM320B: + printf("AM29LV320B (32 Mbit, bottom boot sect)\n"); + break; + case FLASH_AM320T: + printf("AM29LV320T (32 Mbit, top boot sector)\n"); + break; + case FLASH_AM033C: + printf("AM29LV033C (32 Mbit, top boot sector)\n"); + break; + case FLASH_AMLV128U: + printf("AM29LV128U (128 Mbit * 2, top boot sector)\n"); + break; + case FLASH_SST800A: + printf("SST39LF/VF800 (8 Mbit, uniform sector size)\n"); + break; + case FLASH_SST160A: + printf("SST39LF/VF160 (16 Mbit, uniform sector size)\n"); + break; + case FLASH_STMW320DT: + printf ("M29W320DT (32 M, top sector)\n"); + break; + case FLASH_S29GL128N: + printf ("S29GL128N (256 Mbit, uniform sector size)\n"); + break; + default: + printf("Unknown Chip Type\n"); + break; + } + + printf(" Size: %ld KB in %d Sectors\n", + info->size >> 10, info->sector_count); + + printf(" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; ++i) { + /* + * Check if whole sector is erased + */ + if (i != (info->sector_count - 1)) + size = info->start[i + 1] - info->start[i]; + else + size = info->start[0] + info->size - info->start[i]; + erased = 1; + flash = (volatile unsigned long *)info->start[i]; + size = size >> 2; /* divide by 4 for longword access */ + for (k = 0; k < size; k++) { + if (*flash++ != 0xffffffff) { + erased = 0; + break; + } + } + + if ((i % 5) == 0) + printf("\n "); + printf(" %08lX%s%s", + info->start[i], + erased ? " E" : " ", info->protect[i] ? "RO " : " "); + } + printf("\n"); + return; +} + + +/* + * The following code cannot be run from FLASH! + */ +#ifdef FLASH_BASE1_PRELIM +static ulong flash_get_size(vu_long * addr, flash_info_t * info) +{ + if ((ulong)addr == FLASH_BASE1_PRELIM) { + return flash_get_size_2(addr, info); + } else { + return flash_get_size_1(addr, info); + } +} + +static ulong flash_get_size_1(vu_long * addr, flash_info_t * info) +#else +static ulong flash_get_size(vu_long * addr, flash_info_t * info) +#endif +{ + short i; + CFG_FLASH_WORD_SIZE value; + ulong base = (ulong) addr; + volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr; + + DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr); + + /* Write auto select command: read Manufacturer ID */ + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090; + udelay(1000); + + value = addr2[0]; + DEBUGF("FLASH MANUFACT: %x\n", value); + + switch (value) { + case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT: + info->flash_id = FLASH_MAN_AMD; + break; + case (CFG_FLASH_WORD_SIZE) FUJ_MANUFACT: + info->flash_id = FLASH_MAN_FUJ; + break; + case (CFG_FLASH_WORD_SIZE) SST_MANUFACT: + info->flash_id = FLASH_MAN_SST; + break; + case (CFG_FLASH_WORD_SIZE) STM_MANUFACT: + info->flash_id = FLASH_MAN_STM; + break; + default: + info->flash_id = FLASH_UNKNOWN; + info->sector_count = 0; + info->size = 0; + return 0; /* no or unknown flash */ + } + + value = addr2[1]; /* device ID */ + DEBUGF("\nFLASH DEVICEID: %x\n", value); + + switch (value) { + case (CFG_FLASH_WORD_SIZE) AMD_ID_LV040B: + info->flash_id += FLASH_AM040; + info->sector_count = 8; + info->size = 0x0080000; /* => 512 ko */ + break; + + case (CFG_FLASH_WORD_SIZE) AMD_ID_F040B: + info->flash_id += FLASH_AM040; + info->sector_count = 8; + info->size = 0x0080000; /* => 512 ko */ + break; + + case (CFG_FLASH_WORD_SIZE) STM_ID_M29W040B: + info->flash_id += FLASH_AM040; + info->sector_count = 8; + info->size = 0x0080000; /* => 512 ko */ + break; + + case (CFG_FLASH_WORD_SIZE) AMD_ID_F016D: + info->flash_id += FLASH_AMD016; + info->sector_count = 32; + info->size = 0x00200000; + break; /* => 2 MB */ + + case (CFG_FLASH_WORD_SIZE) AMD_ID_LV033C: + info->flash_id += FLASH_AMDLV033C; + info->sector_count = 64; + info->size = 0x00400000; + break; /* => 4 MB */ + + case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400T: + info->flash_id += FLASH_AM400T; + info->sector_count = 11; + info->size = 0x00080000; + break; /* => 0.5 MB */ + + case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400B: + info->flash_id += FLASH_AM400B; + info->sector_count = 11; + info->size = 0x00080000; + break; /* => 0.5 MB */ + + case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800T: + info->flash_id += FLASH_AM800T; + info->sector_count = 19; + info->size = 0x00100000; + break; /* => 1 MB */ + + case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800B: + info->flash_id += FLASH_AM800B; + info->sector_count = 19; + info->size = 0x00100000; + break; /* => 1 MB */ + + case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160T: + info->flash_id += FLASH_AM160T; + info->sector_count = 35; + info->size = 0x00200000; + break; /* => 2 MB */ + + case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160B: + info->flash_id += FLASH_AM160B; + info->sector_count = 35; + info->size = 0x00200000; + break; /* => 2 MB */ + default: + info->flash_id = FLASH_UNKNOWN; + return 0; /* => no or unknown flash */ + } + + /* set up sector start address table */ + if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMD016)) { + for (i = 0; i < info->sector_count; i++) + info->start[i] = base + (i * 0x00010000); + } + else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMLV128U) { + for (i = 0; i < info->sector_count; i++) + info->start[i] = base + (i * 0x00010000 * 2); + } else { + if (info->flash_id & FLASH_BTYPE) { + /* set sector offsets for bottom boot block type */ + info->start[0] = base + 0x00000000; + info->start[1] = base + 0x00004000; + info->start[2] = base + 0x00006000; + info->start[3] = base + 0x00008000; + for (i = 4; i < info->sector_count; i++) { + info->start[i] = + base + (i * 0x00010000) - 0x00030000; + } + } else { + /* set sector offsets for top boot block type */ + i = info->sector_count - 1; + info->start[i--] = base + info->size - 0x00004000; + info->start[i--] = base + info->size - 0x00006000; + info->start[i--] = base + info->size - 0x00008000; + for (; i >= 0; i--) { + info->start[i] = base + i * 0x00010000; + } + } + } + + /* check for protected sectors */ + for (i = 0; i < info->sector_count; i++) { + /* read sector protection at sector address, (A7 .. A0) = 0x02 */ + /* D0 = 1 if protected */ + addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]); + + /* For AMD29033C flash we need to resend the command of * + * reading flash protection for upper 8 Mb of flash */ + if (i == 32) { + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA; + addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555; + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090; + } + + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) + info->protect[i] = 0; + else + info->protect[i] = addr2[2] & 1; + } + + /* issue bank reset to return to read mode */ + addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; + + return info->size; +} + +static int wait_for_DQ7_1(flash_info_t * info, int sect) +{ + ulong start, now, last; + volatile CFG_FLASH_WORD_SIZE *addr = + (CFG_FLASH_WORD_SIZE *) (info->start[sect]); + + start = get_timer(0); + last = start; + while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) != + (CFG_FLASH_WORD_SIZE) 0x00800080) { + if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { + printf("Timeout\n"); + return -1; + } + /* show that we're waiting */ + if ((now - last) > 1000) { /* every second */ + putc('.'); + last = now; + } + } + return 0; +} + +#ifdef FLASH_BASE1_PRELIM +int flash_erase(flash_info_t * info, int s_first, int s_last) +{ + if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMLV128U) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_S29GL128N) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT)) { + return flash_erase_2(info, s_first, s_last); + } else { + return flash_erase_1(info, s_first, s_last); + } +} + +static int flash_erase_1(flash_info_t * info, int s_first, int s_last) +#else +int flash_erase(flash_info_t * info, int s_first, int s_last) +#endif +{ + volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]); + volatile CFG_FLASH_WORD_SIZE *addr2; + int flag, prot, sect, l_sect; + int i; + + if ((s_first < 0) || (s_first > s_last)) { + if (info->flash_id == FLASH_UNKNOWN) { + printf("- missing\n"); + } else { + printf("- no sectors to erase\n"); + } + return 1; + } + + if (info->flash_id == FLASH_UNKNOWN) { + printf("Can't erase unknown flash type - aborted\n"); + return 1; + } + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + + if (prot) { + printf("- Warning: %d protected sectors will not be erased!\n", + prot); + } else { + printf("\n"); + } + + l_sect = -1; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect <= s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]); + + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) { + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080; + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00500050; /* block erase */ + for (i = 0; i < 50; i++) + udelay(1000); /* wait 1 ms */ + } else { + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080; + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030; /* sector erase */ + } + l_sect = sect; + /* + * Wait for each sector to complete, it's more + * reliable. According to AMD Spec, you must + * issue all erase commands within a specified + * timeout. This has been seen to fail, especially + * if printf()s are included (for debug)!! + */ + wait_for_DQ7_1(info, sect); + } + } + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + /* wait at least 80us - let's wait 1 ms */ + udelay(1000); + + /* reset to read mode */ + addr = (CFG_FLASH_WORD_SIZE *) info->start[0]; + addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */ + + printf(" done\n"); + return 0; +} + +/*----------------------------------------------------------------------- + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) +{ + ulong cp, wp, data; + int i, l, rc; + + wp = (addr & ~3); /* get lower word aligned address */ + + /* + * handle unaligned start bytes + */ + if ((l = addr - wp) != 0) { + data = 0; + for (i = 0, cp = wp; i < l; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + for (; i < 4 && cnt > 0; ++i) { + data = (data << 8) | *src++; + --cnt; + ++cp; + } + for (; cnt == 0 && i < 4; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + + if ((rc = write_word(info, wp, data)) != 0) { + return rc; + } + wp += 4; + } + + /* + * handle word aligned part + */ + while (cnt >= 4) { + data = 0; + for (i = 0; i < 4; ++i) { + data = (data << 8) | *src++; + } + if ((rc = write_word(info, wp, data)) != 0) { + return rc; + } + wp += 4; + cnt -= 4; + } + + if (cnt == 0) { + return 0; + } + + /* + * handle unaligned tail bytes + */ + data = 0; + for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) { + data = (data << 8) | *src++; + --cnt; + } + for (; i < 4; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + + return (write_word(info, wp, data)); +} + +/*----------------------------------------------------------------------- + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +#ifdef FLASH_BASE1_PRELIM +static int write_word(flash_info_t * info, ulong dest, ulong data) +{ + if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMLV128U) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_S29GL128N) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT)) { + return write_word_2(info, dest, data); + } else { + return write_word_1(info, dest, data); + } +} + +static int write_word_1(flash_info_t * info, ulong dest, ulong data) +#else +static int write_word(flash_info_t * info, ulong dest, ulong data) +#endif +{ + volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]); + volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest; + volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data; + ulong start; + int i; + + /* Check if Flash is (sufficiently) erased */ + if ((*((vu_long *)dest) & data) != data) { + return 2; + } + + for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) { + int flag; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0; + + dest2[i] = data2[i]; + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + /* data polling for D7 */ + start = get_timer(0); + while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080) != + (data2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080)) { + + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + return 1; + } + } + } + + return 0; +} + +#ifdef FLASH_BASE1_PRELIM + +/* + * The following code cannot be run from FLASH! + */ +static ulong flash_get_size_2(vu_long * addr, flash_info_t * info) +{ + short i; + CFG_FLASH_CHAR_SIZE value; + ulong base = (ulong) addr; + volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr; + + DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr); + + /* Write auto select command: read Manufacturer ID */ + addr2[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA; + addr2[CFG_FLASH_CHAR_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555; + addr2[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090; + udelay(1000); + + value = (CFG_FLASH_CHAR_SIZE)addr2[0]; + DEBUGF("FLASH MANUFACT: %x\n", value); + + switch (value) { + case (CFG_FLASH_CHAR_SIZE) AMD_MANUFACT: + info->flash_id = FLASH_MAN_AMD; + break; + case (CFG_FLASH_CHAR_SIZE) FUJ_MANUFACT: + info->flash_id = FLASH_MAN_FUJ; + break; + case (CFG_FLASH_CHAR_SIZE) SST_MANUFACT: + info->flash_id = FLASH_MAN_SST; + break; + case (CFG_FLASH_CHAR_SIZE) STM_MANUFACT: + info->flash_id = FLASH_MAN_STM; + break; + default: + info->flash_id = FLASH_UNKNOWN; + info->sector_count = 0; + info->size = 0; + return 0; /* no or unknown flash */ + } + + value = (CFG_FLASH_CHAR_SIZE)addr2[2]; /* device ID */ + DEBUGF("\nFLASH DEVICEID: %x\n", value); + + switch (value) { + case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV040B: + info->flash_id += FLASH_AM040; + info->sector_count = 8; + info->size = 0x0080000; /* => 512 ko */ + break; + + case (CFG_FLASH_CHAR_SIZE) AMD_ID_F040B: + info->flash_id += FLASH_AM040; + info->sector_count = 8; + info->size = 0x0080000; /* => 512 ko */ + break; + + case (CFG_FLASH_CHAR_SIZE) STM_ID_M29W040B: + info->flash_id += FLASH_AM040; + info->sector_count = 8; + info->size = 0x0080000; /* => 512 ko */ + break; + + case (CFG_FLASH_CHAR_SIZE) AMD_ID_F016D: + info->flash_id += FLASH_AMD016; + info->sector_count = 32; + info->size = 0x00200000; + break; /* => 2 MB */ + + case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV033C: + info->flash_id += FLASH_AMDLV033C; + info->sector_count = 64; + info->size = 0x00400000; + break; /* => 4 MB */ + + case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV400T: + info->flash_id += FLASH_AM400T; + info->sector_count = 11; + info->size = 0x00080000; + break; /* => 0.5 MB */ + + case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV400B: + info->flash_id += FLASH_AM400B; + info->sector_count = 11; + info->size = 0x00080000; + break; /* => 0.5 MB */ + + case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV800T: + info->flash_id += FLASH_AM800T; + info->sector_count = 19; + info->size = 0x00100000; + break; /* => 1 MB */ + + case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV800B: + info->flash_id += FLASH_AM800B; + info->sector_count = 19; + info->size = 0x00100000; + break; /* => 1 MB */ + + case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV160T: + info->flash_id += FLASH_AM160T; + info->sector_count = 35; + info->size = 0x00200000; + break; /* => 2 MB */ + + case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV160B: + info->flash_id += FLASH_AM160B; + info->sector_count = 35; + info->size = 0x00200000; + break; /* => 2 MB */ + case (CFG_FLASH_CHAR_SIZE) AMD_ID_MIRROR: + if ((CFG_FLASH_CHAR_SIZE)addr2[0x1c] == (CFG_FLASH_CHAR_SIZE)AMD_ID_LV128U_2 + && (CFG_FLASH_CHAR_SIZE)addr2[0x1e] == (CFG_FLASH_CHAR_SIZE)AMD_ID_LV128U_3) { + info->flash_id += FLASH_AMLV128U; + info->sector_count = 256; + info->size = 0x01000000; + } else if ((CFG_FLASH_CHAR_SIZE)addr2[0x1c] == (CFG_FLASH_CHAR_SIZE)AMD_ID_GL128N_2 + && (CFG_FLASH_CHAR_SIZE)addr2[0x1e] == (CFG_FLASH_CHAR_SIZE)AMD_ID_GL128N_3 ) { + info->flash_id += FLASH_S29GL128N; + info->sector_count = 128; + info->size = 0x01000000; + } + else + info->flash_id = FLASH_UNKNOWN; + break; /* => 2 MB */ + + default: + info->flash_id = FLASH_UNKNOWN; + return 0; /* => no or unknown flash */ + } + + /* set up sector start address table */ + if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMD016)) { + for (i = 0; i < info->sector_count; i++) + info->start[i] = base + (i * 0x00010000); + } else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMLV128U) { + for (i = 0; i < info->sector_count; i++) + info->start[i] = base + (i * 0x00010000); + } else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_S29GL128N ) { + for (i = 0; i < info->sector_count; i++) + info->start[i] = base + (i * 0x00020000); + } else { + if (info->flash_id & FLASH_BTYPE) { + /* set sector offsets for bottom boot block type */ + info->start[0] = base + 0x00000000; + info->start[1] = base + 0x00004000; + info->start[2] = base + 0x00006000; + info->start[3] = base + 0x00008000; + for (i = 4; i < info->sector_count; i++) { + info->start[i] = + base + (i * 0x00010000) - 0x00030000; + } + } else { + /* set sector offsets for top boot block type */ + i = info->sector_count - 1; + info->start[i--] = base + info->size - 0x00004000; + info->start[i--] = base + info->size - 0x00006000; + info->start[i--] = base + info->size - 0x00008000; + for (; i >= 0; i--) { + info->start[i] = base + i * 0x00010000; + } + } + } + + /* check for protected sectors */ + for (i = 0; i < info->sector_count; i++) { + /* read sector protection at sector address, (A7 .. A0) = 0x02 */ + /* D0 = 1 if protected */ + addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]); + + /* For AMD29033C flash we need to resend the command of * + * reading flash protection for upper 8 Mb of flash */ + if (i == 32) { + addr2[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA; + addr2[CFG_FLASH_CHAR_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555; + addr2[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090; + } + + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) + info->protect[i] = 0; + else + info->protect[i] = (CFG_FLASH_CHAR_SIZE)addr2[4] & 1; + } + + /* issue bank reset to return to read mode */ + addr2[0] = (CFG_FLASH_WORD_SIZE) 0xF0F0F0F0; + return info->size; +} + +static int wait_for_DQ7_2(flash_info_t * info, int sect) +{ + ulong start, now, last; + volatile CFG_FLASH_WORD_SIZE *addr = + (CFG_FLASH_WORD_SIZE *) (info->start[sect]); + + start = get_timer(0); + last = start; + while (((CFG_FLASH_WORD_SIZE)addr[0] & (CFG_FLASH_WORD_SIZE) 0x80808080) != + (CFG_FLASH_WORD_SIZE) 0x80808080) { + if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { + printf("Timeout\n"); + return -1; + } + /* show that we're waiting */ + if ((now - last) > 1000) { /* every second */ + putc('.'); + last = now; + } + } + return 0; +} + +static int flash_erase_2(flash_info_t * info, int s_first, int s_last) +{ + volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]); + volatile CFG_FLASH_WORD_SIZE *addr2; + int flag, prot, sect, l_sect; + int i; + + if ((s_first < 0) || (s_first > s_last)) { + if (info->flash_id == FLASH_UNKNOWN) { + printf("- missing\n"); + } else { + printf("- no sectors to erase\n"); + } + return 1; + } + + if (info->flash_id == FLASH_UNKNOWN) { + printf("Can't erase unknown flash type - aborted\n"); + return 1; + } + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + + if (prot) { + printf("- Warning: %d protected sectors will not be erased!\n", + prot); + } else { + printf("\n"); + } + + l_sect = -1; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect <= s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]); + + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) { + addr[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA; + addr[CFG_FLASH_CHAR_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555; + addr[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x80808080; + addr[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA; + addr[CFG_FLASH_CHAR_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555; + addr2[0] = (CFG_FLASH_WORD_SIZE) 0x50505050; /* block erase */ + for (i = 0; i < 50; i++) + udelay(1000); /* wait 1 ms */ + } else { + addr[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA; + addr[CFG_FLASH_CHAR_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555; + addr[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x80808080; + addr[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA; + addr[CFG_FLASH_CHAR_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555; + addr2[0] = (CFG_FLASH_WORD_SIZE) 0x30303030; /* sector erase */ + } + l_sect = sect; + /* + * Wait for each sector to complete, it's more + * reliable. According to AMD Spec, you must + * issue all erase commands within a specified + * timeout. This has been seen to fail, especially + * if printf()s are included (for debug)!! + */ + wait_for_DQ7_2(info, sect); + } + } + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + /* wait at least 80us - let's wait 1 ms */ + udelay(1000); + + /* reset to read mode */ + addr = (CFG_FLASH_WORD_SIZE *) info->start[0]; + addr[0] = (CFG_FLASH_WORD_SIZE) 0xF0F0F0F0; /* reset bank */ + + printf(" done\n"); + return 0; +} + +static int write_word_2(flash_info_t * info, ulong dest, ulong data) +{ + volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]); + volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest; + volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data; + ulong start; + int i; + + /* Check if Flash is (sufficiently) erased */ + if ((*((vu_long *)dest) & data) != data) { + return 2; + } + + for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) { + int flag; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + addr2[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA; + addr2[CFG_FLASH_CHAR_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555; + addr2[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xA0A0A0A0; + + dest2[i] = data2[i]; + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + /* data polling for D7 */ + start = get_timer(0); + while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x80808080) != + (data2[i] & (CFG_FLASH_WORD_SIZE) 0x80808080)) { + + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + return 1; + } + } + } + + return 0; +} + +#endif /* FLASH_BASE1_PRELIM */ diff --git a/board/amcc/taihu/lcd.c b/board/amcc/taihu/lcd.c new file mode 100644 index 00000000000..3d042dfa736 --- /dev/null +++ b/board/amcc/taihu/lcd.c @@ -0,0 +1,257 @@ +/* + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +#define LCD_CMD_ADDR 0x50100002 +#define LCD_DATA_ADDR 0x50100003 +#define LCD_BLK_CTRL CPLD_REG1_ADDR + +static char *amcc_logo = "AMCC 405EP TAIHU EVALUATION KIT"; +static int addr_flag = 0x80; + +static void lcd_bl_ctrl(char val) +{ + out_8((u8 *) LCD_BLK_CTRL, in_8((u8 *) LCD_BLK_CTRL) | val); +} + +static void lcd_putc(int val) +{ + int i = 100; + char addr; + + while (i--) { + if ((in_8((u8 *) LCD_CMD_ADDR) & 0x80) != 0x80) { /*BF = 1 ?*/ + udelay(50); + break; + } + udelay(50); + } + + if (in_8((u8 *) LCD_CMD_ADDR) & 0x80) { + printf("LCD is busy\n"); + return; + } + + addr = in_8((u8 *) LCD_CMD_ADDR); + udelay(50); + if ((addr != 0) && (addr % 0x10 == 0)) { + addr_flag ^= 0x40; + out_8((u8 *) LCD_CMD_ADDR, addr_flag); + } + + udelay(50); + out_8((u8 *) LCD_DATA_ADDR, val); + udelay(50); +} + +static void lcd_puts(char *s) +{ + char *p = s; + int i = 100; + + while (i--) { + if ((in_8((u8 *) LCD_CMD_ADDR) & 0x80) != 0x80) { /*BF = 1 ?*/ + udelay(50); + break; + } + udelay(50); + } + + if (in_8((u8 *) LCD_CMD_ADDR) & 0x80) { + printf("LCD is busy\n"); + return; + } + + while (*p) + lcd_putc(*p++); +} + +static void lcd_put_logo(void) +{ + int i = 100; + char *p = amcc_logo; + + while (i--) { + if ((in_8((u8 *) LCD_CMD_ADDR) & 0x80) != 0x80) { /*BF = 1 ?*/ + udelay(50); + break; + } + udelay(50); + } + + if (in_8((u8 *) LCD_CMD_ADDR) & 0x80) { + printf("LCD is busy\n"); + return; + } + + out_8((u8 *) LCD_CMD_ADDR, 0x80); + while (*p) + lcd_putc(*p++); +} + +int lcd_init(void) +{ + puts("LCD: "); + out_8((u8 *) LCD_CMD_ADDR, 0x38); /* set function:8-bit,2-line,5x7 font type */ + udelay(50); + out_8((u8 *) LCD_CMD_ADDR, 0x0f); /* set display on,cursor on,blink on */ + udelay(50); + out_8((u8 *) LCD_CMD_ADDR, 0x01); /* display clear */ + udelay(2000); + out_8((u8 *) LCD_CMD_ADDR, 0x06); /* set entry */ + udelay(50); + lcd_bl_ctrl(0x02); /* set backlight on */ + lcd_put_logo(); + puts("ready\n"); + + return 0; +} + +static int do_lcd_clear (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + out_8((u8 *) LCD_CMD_ADDR, 0x01); + udelay(2000); + + return 0; +} + +static int do_lcd_puts (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + if (argc < 2) { + printf("%s", cmdtp->usage); + return 1; + } + lcd_puts(argv[1]); + + return 0; +} + +static int do_lcd_putc (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + if (argc < 2) { + printf("%s", cmdtp->usage); + return 1; + } + lcd_putc((char)argv[1][0]); + + return 0; +} + +static int do_lcd_cur (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + ulong count; + ulong dir; + char cur_addr; + + if (argc < 3) { + printf("%s", cmdtp->usage); + return 1; + } + + count = simple_strtoul(argv[1], NULL, 16); + if (count > 31) { + printf("unable to shift > 0x20\n"); + count = 0; + } + + dir = simple_strtoul(argv[2], NULL, 16); + cur_addr = in_8((u8 *) LCD_CMD_ADDR); + udelay(50); + + if (dir == 0x0) { + if (addr_flag == 0x80) { + if (count >= (cur_addr & 0xf)) { + out_8((u8 *) LCD_CMD_ADDR, 0x80); + udelay(50); + count = 0; + } + } else { + if (count >= ((cur_addr & 0x0f) + 0x0f)) { + out_8((u8 *) LCD_CMD_ADDR, 0x80); + addr_flag = 0x80; + udelay(50); + count = 0x0; + } else if (count >= ( cur_addr & 0xf)) { + count -= cur_addr & 0xf ; + out_8((u8 *) LCD_CMD_ADDR, 0x80 | 0xf); + addr_flag = 0x80; + udelay(50); + } + } + } else { + if (addr_flag == 0x80) { + if (count >= (0x1f - (cur_addr & 0xf))) { + count = 0x0; + addr_flag = 0xc0; + out_8((u8 *) LCD_CMD_ADDR, 0xc0 | 0xf); + udelay(50); + } else if ((count + (cur_addr & 0xf ))>= 0x0f) { + count = count + (cur_addr & 0xf) - 0x0f; + addr_flag = 0xc0; + out_8((u8 *) LCD_CMD_ADDR, 0xc0); + udelay(50); + } + } else if ((count + (cur_addr & 0xf )) >= 0x0f) { + count = 0x0; + out_8((u8 *) LCD_CMD_ADDR, 0xC0 | 0x0F); + udelay(50); + } + } + while (count--) { + if (dir == 0) + out_8((u8 *) LCD_CMD_ADDR, 0x10); + else + out_8((u8 *) LCD_CMD_ADDR, 0x14); + udelay(50); + } + + return 0; +} + +U_BOOT_CMD( + lcd_cls, 1, 1, do_lcd_clear, + "lcd_cls - lcd clear display\n", + NULL + ); + +U_BOOT_CMD( + lcd_puts, 2, 1, do_lcd_puts, + "lcd_puts - display string on lcd\n", + " - to be displayed\n" + ); + +U_BOOT_CMD( + lcd_putc, 2, 1, do_lcd_putc, + "lcd_putc - display char on lcd\n", + " - to be displayed\n" + ); + +U_BOOT_CMD( + lcd_cur, 3, 1, do_lcd_cur, + "lcd_cur - shift cursor on lcd\n", + " - shift cursor on lcd times, direction is \n" + " - 0..31\n" + " - 0=backward 1=forward\n" + ); diff --git a/board/amcc/taihu/taihu.c b/board/amcc/taihu/taihu.c new file mode 100644 index 00000000000..ee9d3b5446f --- /dev/null +++ b/board/amcc/taihu/taihu.c @@ -0,0 +1,234 @@ +/* + * (C) Copyright 2000-2005 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2005-2007 + * Beijing UD Technology Co., Ltd., taihusupport@amcc.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include +#include +#include +#include +#include +#include + +extern int lcd_init(void); + +/* + * board_early_init_f + */ +int board_early_init_f(void) +{ + lcd_init(); + + mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(uicer, 0x00000000); /* disable all ints */ + mtdcr(uiccr, 0x00000000); + mtdcr(uicpr, 0xFFFF7F00); /* set int polarities */ + mtdcr(uictr, 0x00000000); /* set int trigger levels */ + mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */ + + mtebc(pb3ap, CFG_EBC_PB3AP); /* memory bank 3 (CPLD_LCM) initialization */ + mtebc(pb3cr, CFG_EBC_PB3CR); + + return 0; +} + +/* + * Check Board Identity: + */ +int checkboard(void) +{ + char *s = getenv("serial#"); + + puts("Board: Taihu - AMCC PPC405EP Evaluation Board"); + + if (s != NULL) { + puts(", serial# "); + puts(s); + } + putc('\n'); + + return 0; +} + +/************************************************************************* + * long int initdram + * + ************************************************************************/ +long int initdram(int board) +{ + return CFG_SDRAM_SIZE_PER_BANK * CFG_SDRAM_BANKS; /* 128Mbytes */ +} + +static int do_sw_stat(cmd_tbl_t* cmd_tp, int flags, int argc, char *argv[]) +{ + char stat; + int i; + + stat = in_8((u8 *) CPLD_REG0_ADDR); + printf("SW2 status: "); + for (i=0; i<4; i++) /* 4-position */ + printf("%d:%s ", i, stat & (0x08 >> i)?"on":"off"); + printf("\n"); + return 0; +} + +U_BOOT_CMD ( + sw2_stat, 1, 1, do_sw_stat, + "sw2_stat - show status of switch 2\n", + NULL + ); + +static int do_led_ctl(cmd_tbl_t* cmd_tp, int flags, int argc, char *argv[]) +{ + int led_no; + + if (argc != 3) { + printf("%s", cmd_tp->usage); + return -1; + } + + led_no = simple_strtoul(argv[1], NULL, 16); + if (led_no != 1 && led_no != 2) { + printf("%s", cmd_tp->usage); + return -1; + } + + if (strcmp(argv[2],"off") == 0x0) { + if (led_no == 1) + gpio_write_bit(30, 1); + else + gpio_write_bit(31, 1); + } else if (strcmp(argv[2],"on") == 0x0) { + if (led_no == 1) + gpio_write_bit(30, 0); + else + gpio_write_bit(31, 0); + } else { + printf("%s", cmd_tp->usage); + return -1; + } + + return 0; +} + +U_BOOT_CMD ( + led_ctl, 3, 1, do_led_ctl, + "led_ctl - make led 1 or 2 on or off\n", + " - make led on/off,\n" + "\tled_no is 1 or 2\t" + ); + +#define SPI_CS_GPIO0 0 +#define SPI_SCLK_GPIO14 14 +#define SPI_DIN_GPIO15 15 +#define SPI_DOUT_GPIO16 16 + +void spi_scl(int bit) +{ + gpio_write_bit(SPI_SCLK_GPIO14, bit); +} + +void spi_sda(int bit) +{ + gpio_write_bit(SPI_DOUT_GPIO16, bit); +} + +unsigned char spi_read(void) +{ + return (unsigned char)gpio_read_out_bit(SPI_DIN_GPIO15); +} + +void taihu_spi_chipsel(int cs) +{ + gpio_write_bit(SPI_CS_GPIO0, cs); +} + +spi_chipsel_type spi_chipsel[]= { + taihu_spi_chipsel +}; + +int spi_chipsel_cnt = sizeof(spi_chipsel) / sizeof(spi_chipsel[0]); + +#ifdef CONFIG_PCI +static unsigned char int_lines[32] = { + 29, 30, 27, 28, 29, 30, 25, 27, + 29, 30, 27, 28, 29, 30, 27, 28, + 29, 30, 27, 28, 29, 30, 27, 28, + 29, 30, 27, 28, 29, 30, 27, 28}; + +static void taihu_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev) +{ + unsigned char int_line = int_lines[PCI_DEV(dev) & 31]; + + pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, int_line); +} + +int pci_pre_init(struct pci_controller *hose) +{ + hose->fixup_irq = taihu_pci_fixup_irq; + return 1; +} +#endif /* CONFIG_PCI */ + +#ifdef CFG_DRAM_TEST +int testdram(void) +{ + unsigned long *mem = (unsigned long *)0; + const unsigned long kend = (1024 / sizeof(unsigned long)); + unsigned long k, n; + unsigned long msr; + unsigned long total_kbytes = CFG_SDRAM_SIZE_PER_BANK * CFG_SDRAM_BANKS / 1024; + + msr = mfmsr(); + mtmsr(msr & ~(MSR_EE)); + + for (k = 0; k < total_kbytes ; + ++k, mem += (1024 / sizeof(unsigned long))) { + if ((k & 1023) == 0) + printf("%3d MB\r", k / 1024); + + memset(mem, 0xaaaaaaaa, 1024); + for (n = 0; n < kend; ++n) { + if (mem[n] != 0xaaaaaaaa) { + printf("SDRAM test fails at: %08x\n", + (uint) & mem[n]); + return 1; + } + } + + memset(mem, 0x55555555, 1024); + for (n = 0; n < kend; ++n) { + if (mem[n] != 0x55555555) { + printf("SDRAM test fails at: %08x\n", + (uint) & mem[n]); + return 1; + } + } + } + printf("SDRAM test passes\n"); + mtmsr(msr); + + return 0; +} +#endif /* CFG_DRAM_TEST */ diff --git a/board/amcc/taihu/u-boot.lds b/board/amcc/taihu/u-boot.lds new file mode 100644 index 00000000000..be030923b8e --- /dev/null +++ b/board/amcc/taihu/u-boot.lds @@ -0,0 +1,150 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + .resetvec 0xFFFFFFFC : + { + *(.resetvec) + } = 0xffff + + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/ppc4xx/start.o (.text) + cpu/ppc4xx/kgdb.o (.text) + cpu/ppc4xx/traps.o (.text) + cpu/ppc4xx/interrupts.o (.text) + cpu/ppc4xx/serial.o (.text) + cpu/ppc4xx/cpu_init.o (.text) + cpu/ppc4xx/speed.o (.text) + common/dlmalloc.o (.text) + lib_generic/crc32.o (.text) + lib_ppc/extable.o (.text) + lib_generic/zlib.o (.text) + +/* . = env_offset;*/ +/* common/environment.o(.text)*/ + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/amcc/taihu/update.c b/board/amcc/taihu/update.c new file mode 100644 index 00000000000..55ad535c8cb --- /dev/null +++ b/board/amcc/taihu/update.c @@ -0,0 +1,132 @@ +/* + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +#define PCI_M66EN 0x10 + +static uchar buf_33[] = +{ + 0xb5, /* 0x00:hce =1, bss = 0, pae=1, ppdv= 0b10,spe = 1,ebw=0b01*/ + 0x80, /* 0x01~0x03:ptm1ms =0x80000001 */ + 0x00, + 0x00, + 0x00, /* 0x04~0x06:ptm1la = 0x00000000 */ + 0x00, + 0x00, + 0x00, /* 0x07~0x09:ptm2ma = 0x00000000 */ + 0x00, + 0x00, + 0x00, /* 0x0a~0x0c:ptm2la = 0x00000000 */ + 0x00, + 0x00, + 0x10, /* 0x0d~0x0e:vendor id 0x1014*/ + 0x14, + 0x00, /* 0x0f~0x10:device id 0x0000*/ + 0x00, + 0x00, /* 0x11:revision 0x00 */ + 0x00, /* 0x12~0x14:class 0x000000 */ + 0x00, + 0x00, + 0x10, /* 0x15~0x16:subsystem vendor id */ + 0xe8, + 0x00, /* 0x17~0x18:subsystem device id */ + 0x00, + 0x61, /* 0x19: opdv=0b01,cbdv=0b10,ccdv=0b00,ptm2ms_ena=0, ptm1ms_ena=1 */ + 0x68, /* 0x1a: rpci=1,fbmul=0b1010,epdv=0b00 */ + 0x2d, /* 0x1b: fwdvb=0b101,fwdva=0b101 */ + 0x82, /* 0x1c: pllr=1,sscs=0,mpdv=0b00,tun[22-23]=0b10 */ + 0xbe, /* 0x1d: tun[24-31]=0xbe */ + 0x00, + 0x00 +}; + +static uchar buf_66[] = +{ + 0xb5, /* 0x00:hce =1, bss = 0, pae=1, ppdv= 0b10,spe = 1,ebw=0b01*/ + 0x80, /* 0x01~0x03:ptm1ms =0x80000001 */ + 0x00, + 0x00, + 0x00, /* 0x04~0x06:ptm1la = 0x00000000 */ + 0x00, + 0x00, + 0x00, /* 0x07~0x09:ptm2ma = 0x00000000 */ + 0x00, + 0x00, + 0x00, /* 0x0a~0x0c:ptm2la = 0x00000000 */ + 0x00, + 0x00, + 0x10, /* 0x0d~0x0e:vendor id 0x1014*/ + 0x14, + 0x00, /* 0x0f~0x10:device id 0x0000*/ + 0x00, + 0x00, /* 0x11:revision 0x00 */ + 0x00, /* 0x12~0x14:class 0x000000 */ + 0x00, + 0x00, + 0x10, /* 0x15~0x16:subsystem vendor id */ + 0xe8, + 0x00, /* 0x17~0x18:subsystem device id */ + 0x00, + 0x61, /* 0x19: opdv=0b01,cbdv=0b10,ccdv=0b00,ptm2ms_ena=0, ptm1ms_ena=1 */ + 0x68, /* 0x1a: rpci=1,fbmul=0b1010,epdv=0b00 */ + 0x2d, /* 0x1b: fwdvb=0b101,fwdva=0b101 */ + 0x82, /* 0x1c: pllr=1,sscs=0,mpdv=0b00,tun[22-23]=0b10 */ + 0xbe, /* 0x1d: tun[24-31]=0xbe */ + 0x00, + 0x00 +}; + +static int update_boot_eeprom(cmd_tbl_t* cmdtp, int flag, int argc, char *argv[]) +{ + ulong len = 0x20; + uchar chip = CFG_I2C_EEPROM_ADDR; + uchar *pbuf; + uchar base; + int i; + + if ((*(volatile char*)CPLD_REG0_ADDR & PCI_M66EN) != PCI_M66EN) { + pbuf = buf_33; + base = 0x00; + } else { + pbuf = buf_66; + base = 0x40; + } + + for (i = 0; i< len; i++, base++) { + if (i2c_write(chip, base, 1, &pbuf[i],1)!= 0) { + printf("i2c_write fail\n"); + return 1; + } + udelay(11000); + } + + return 0; +} + +U_BOOT_CMD ( + update_boot_eeprom, 1, 1, update_boot_eeprom, + "update_boot_eeprom - update boot eeprom content\n", + NULL + ); diff --git a/common/soft_spi.c b/common/soft_spi.c index 00a57de8aa7..e4250616c28 100644 --- a/common/soft_spi.c +++ b/common/soft_spi.c @@ -79,7 +79,9 @@ void spi_init (void) */ int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar *dout, uchar *din) { +#ifdef CFG_IMMR volatile immap_t *immr = (immap_t *)CFG_IMMR; +#endif uchar tmpdin = 0; uchar tmpdout = 0; int j; diff --git a/cpu/ppc4xx/gpio.c b/cpu/ppc4xx/gpio.c index 0d0e273fc42..50f2fdf1139 100644 --- a/cpu/ppc4xx/gpio.c +++ b/cpu/ppc4xx/gpio.c @@ -186,6 +186,7 @@ void gpio_set_chip_configuration(void) out32(GPIO0_TCR, reg); } +#ifdef GPIO1 if (gpio_core == GPIO1) { /* * Setup output value @@ -203,6 +204,7 @@ void gpio_set_chip_configuration(void) reg = in32(GPIO1_TCR) | (0x80000000 >> (i)); out32(GPIO1_TCR, reg); } +#endif /* GPIO1 */ reg = in32(GPIO_OS(core_add+offs)) & ~(GPIO_MASK >> (j*2)); diff --git a/cpu/ppc4xx/sdram.c b/cpu/ppc4xx/sdram.c index d520cd3ff4c..3a0ca17d9fe 100644 --- a/cpu/ppc4xx/sdram.c +++ b/cpu/ppc4xx/sdram.c @@ -209,8 +209,17 @@ void sdram_init(void) if (get_ram_size(0, mb0cf[i].size) == mb0cf[i].size) { /* - * OK, size detected -> all done + * OK, size detected. Enable second bank if + * defined (assumes same type as bank 0) */ +#ifdef CONFIG_SDRAM_BANK1 + u32 b1cr = mb0cf[i].size | mb0cf[i].reg; + + mtsdram0(mem_mcopt1, 0x00000000); + mtsdram0(mem_mb1cf, b1cr); /* SDRAM0_B1CR */ + mtsdram0(mem_mcopt1, 0x80800000); + udelay(10000); +#endif return; } } diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index 8ecaaea4d9a..18d34456095 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -1869,6 +1869,11 @@ ppc405ep_init: ori r3,r3,CFG_EBC_PB4CR@l mtdcr ebccfgd,r3 #endif +#ifdef CONFIG_TAIHU + mfdcr r4, CPC0_BOOT + andi. r5, r4, CPC0_BOOT_SEP@l + bne strap_0 /* serial eeprom present */ +#endif #ifndef CFG_CPC0_PCI li r3,CPC0_PCI_HOST_CFG_EN @@ -1886,12 +1891,16 @@ ppc405ep_init: beq ..pci_cfg_set /* if not set, then bypass reg write*/ #endif ori r3,r3,CPC0_PCI_ARBIT_EN +#ifdef CONFIG_TAIHU + ori r3,r3,CPC0_PCI_SPE +#endif #else /* CFG_CPC0_PCI */ li r3,CFG_CPC0_PCI #endif /* CFG_CPC0_PCI */ ..pci_cfg_set: mtdcr CPC0_PCI, r3 /* Enable internal arbiter*/ +strap_0: /* !----------------------------------------------------------------------- ! Check to see if chip is in bypass mode. @@ -1947,11 +1956,35 @@ ppc405ep_init: ..no_pllset: #endif /* CONFIG_BUBINGA */ +#ifdef CONFIG_TAIHU + mfdcr r4, CPC0_BOOT + andi. r5, r4, CPC0_BOOT_SEP@l + bne strap_1 /* serial eeprom present */ + addis r5,0,CPLD_REG0_ADDR@h + ori r5,r5,CPLD_REG0_ADDR@l + andi. r5, r5, 0x10 + bne _pci_66mhz +#endif /* CONFIG_TAIHU */ + addis r3,0,PLLMR0_DEFAULT@h /* PLLMR0 default value */ ori r3,r3,PLLMR0_DEFAULT@l /* */ addis r4,0,PLLMR1_DEFAULT@h /* PLLMR1 default value */ ori r4,r4,PLLMR1_DEFAULT@l /* */ +#ifdef CONFIG_TAIHU + b 1f +_pci_66mhz: + addis r3,0,PLLMR0_DEFAULT_PCI66@h + ori r3,r3,PLLMR0_DEFAULT_PCI66@l + addis r4,0,PLLMR1_DEFAULT_PCI66@h + ori r4,r4,PLLMR1_DEFAULT_PCI66@l + b 1f +strap_1: + mfdcr r3, CPC0_PLLMR0 + mfdcr r4, CPC0_PLLMR1 +1: +#endif /* CONFIG_TAIHU */ + b pll_write /* Write the CPC0_PLLMR with new value */ pll_done: diff --git a/dtt/Makefile b/dtt/Makefile index e6cb128f3de..c6a670af173 100644 --- a/dtt/Makefile +++ b/dtt/Makefile @@ -30,7 +30,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)libdtt.a -COBJS = lm75.o ds1621.o adm1021.o lm81.o +COBJS = lm75.o ds1621.o adm1021.o lm81.o ds1775.o SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/dtt/ds1775.c b/dtt/ds1775.c new file mode 100644 index 00000000000..e44cee3279c --- /dev/null +++ b/dtt/ds1775.c @@ -0,0 +1,156 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Dallas Semiconductor's DS1775 Digital Thermometer and Thermostat + */ + +#include + +#ifdef CONFIG_DTT_DS1775 +#include +#include + +#define DTT_I2C_DEV_CODE 0x49 /* Dallas Semi's DS1775 device code */ + +int dtt_read(int sensor, int reg) +{ + int dlen; + uchar data[2]; + + /* + * Calculate sensor address and command + */ + sensor = DTT_I2C_DEV_CODE + (sensor & 0x07); /* Calculate addr of ds1775 */ + + /* + * Prepare to handle 2 byte result + */ + if ((reg == DTT_READ_TEMP) || + (reg == DTT_TEMP_OS) || (reg == DTT_TEMP_HYST)) + dlen = 2; + else + dlen = 1; + + /* + * Now try to read the register + */ + if (i2c_read(sensor, reg, 1, data, dlen) != 0) + return 1; + + /* + * Handle 2 byte result + */ + if (dlen == 2) + return ((int)((short)data[1] + (((short)data[0]) << 8))); + + return (int) data[0]; +} + + +int dtt_write(int sensor, int reg, int val) +{ + int dlen; + uchar data[2]; + + /* + * Calculate sensor address and register + */ + sensor = DTT_I2C_DEV_CODE + (sensor & 0x07); + + /* + * Handle various data sizes + */ + if ((reg == DTT_READ_TEMP) || + (reg == DTT_TEMP_OS) || (reg == DTT_TEMP_HYST)) { + dlen = 2; + data[0] = (char)((val >> 8) & 0xff); /* MSB first */ + data[1] = (char)(val & 0xff); + } else { + dlen = 1; + data[0] = (char)(val & 0xff); + } + + /* + * Write value to device + */ + if (i2c_write(sensor, reg, 1, data, dlen) != 0) + return 1; + + return 0; +} + + +static int _dtt_init(int sensor) +{ + int val; + + /* + * Setup High Temp + */ + val = ((CFG_DTT_MAX_TEMP * 2) << 7) & 0xff80; + if (dtt_write(sensor, DTT_TEMP_OS, val) != 0) + return 1; + udelay(50000); /* Max 50ms */ + + /* + * Setup Low Temp - hysteresis + */ + val = (((CFG_DTT_MAX_TEMP - CFG_DTT_HYSTERESIS) * 2) << 7) & 0xff80; + if (dtt_write(sensor, DTT_TEMP_HYST, val) != 0) + return 1; + udelay(50000); /* Max 50ms */ + + /* + * Setup configuraton register + * + * Fault Tolerance limits 4, Thermometer resolution bits is 9, + * Polarity = Active Low,continuous conversion mode, Thermostat + * mode is interrupt mode + */ + val = 0xa; + if (dtt_write(sensor, DTT_CONFIG, val) != 0) + return 1; + udelay(50000); /* Max 50ms */ + + return 0; +} + + +int dtt_init (void) +{ + int i; + unsigned char sensors[] = CONFIG_DTT_SENSORS; + + for (i = 0; i < sizeof(sensors); i++) { + if (_dtt_init(sensors[i]) != 0) + printf("DTT%d: FAILED\n", i+1); + else + printf("DTT%d: %i C\n", i+1, dtt_get_temp(sensors[i])); + } + + return (0); +} + + +int dtt_get_temp(int sensor) +{ + return (dtt_read(sensor, DTT_READ_TEMP) / 256); +} + + +#endif /* CONFIG_DTT_DS1775 */ diff --git a/include/configs/taihu.h b/include/configs/taihu.h new file mode 100644 index 00000000000..61814a80960 --- /dev/null +++ b/include/configs/taihu.h @@ -0,0 +1,473 @@ +/* + * (C) Copyright 2000-2005 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2005-2007 + * Beijing UD Technology Co., Ltd., taihusupport@amcc.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + + +#define CONFIG_405EP 1 /* this is a PPC405 CPU */ +#define CONFIG_4xx 1 /* member of PPC4xx family */ +#define CONFIG_TAIHU 1 /* on a taihu board */ + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f */ + +#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ + +#define CONFIG_NO_SERIAL_EEPROM + +/*----------------------------------------------------------------------------*/ +#ifdef CONFIG_NO_SERIAL_EEPROM + +/* +!------------------------------------------------------------------------------- +! PLL settings for 333MHz CPU, 111MHz PLB/SDRAM, 55MHz EBC, 33MHz PCI, +! assuming a 33MHz input clock to the 405EP from the C9531. +!------------------------------------------------------------------------------- +*/ +#define PLLMR0_333_111_55_37 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \ + PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \ + PLL_MALDIV_1 | PLL_PCIDIV_3) +#define PLLMR1_333_111_55_37 (PLL_FBKDIV_10 | \ + PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI) +#define PLLMR0_333_111_55_111 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \ + PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \ + PLL_MALDIV_1 | PLL_PCIDIV_1) +#define PLLMR1_333_111_55_111 (PLL_FBKDIV_10 | \ + PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI) + +#define PLLMR0_DEFAULT PLLMR0_333_111_55_37 +#define PLLMR1_DEFAULT PLLMR1_333_111_55_37 +#define PLLMR0_DEFAULT_PCI66 PLLMR0_333_111_55_111 +#define PLLMR1_DEFAULT_PCI66 PLLMR1_333_111_55_111 + +#endif +/*----------------------------------------------------------------------------*/ + +#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ + +#define CONFIG_ENV_OVERWRITE 1 +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootfile=/tftpboot/taihu/uImage\0" \ + "rootpath=/opt/eldk/ppc_4xx\0" \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "kernel_addr=FC000000\0" \ + "ramdisk_addr=FC180000\0" \ + "load=tftp 200000 /tftpboot/taihu/u-boot.bin\0" \ + "update=protect off FFFC0000 FFFFFFFF;era FFFC0000 FFFFFFFF;" \ + "cp.b 200000 FFFC0000 40000\0" \ + "upd=run load;run update\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_self" + +#if 0 +#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ +#else +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_PHY_ADDR 0x14 /* PHY address */ +#define CONFIG_HAS_ETH1 +#define CONFIG_PHY1_ADDR 0x10 /* EMAC1 PHY address */ +#define CONFIG_NET_MULTI 1 +#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */ +#define CONFIG_PHY_RESET 1 + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_CACHE | \ + CFG_CMD_DHCP | \ + CFG_CMD_EEPROM | \ + CFG_CMD_ELF | \ + CFG_CMD_I2C | \ + CFG_CMD_SPI | \ + CFG_CMD_IRQ | \ + CFG_CMD_MII | \ + CFG_CMD_NET | \ + CFG_CMD_PCI | \ + CFG_CMD_PING | \ + CFG_CMD_REGINFO | \ + CFG_CMD_SDRAM ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +#undef CONFIG_SPD_EEPROM /* use SPD EEPROM for setup */ +#define CFG_SDRAM_SIZE_PER_BANK 0x04000000 /* 64MB */ +#define CFG_SDRAM_BANKS 2 + +/* + * SDRAM configuration (please see cpu/ppc/sdram.[ch]) + */ +#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ +#define CONFIG_SDRAM_BANK1 1 /* init onboard SDRAM bank 1 */ + +/* SDRAM timings used in datasheet */ +#define CFG_SDRAM_CL 3 /* CAS latency */ +#define CFG_SDRAM_tRP 20 /* PRECHARGE command period */ +#define CFG_SDRAM_tRC 66 /* ACTIVE-to-ACTIVE command period */ +#define CFG_SDRAM_tRCD 20 /* ACTIVE-to-READ delay */ +#define CFG_SDRAM_tRFC 66 /* Auto refresh period */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* print buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +/* + * If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1. + * If CFG_405_UART_ERRATA_59, then UART divisor is 31. + * Otherwise, UART divisor is determined by CPU Clock and CFG_BASE_BAUD value. + * The Linux BASE_BAUD define should match this configuration. + * baseBaud = cpuClock/(uartDivisor*16) + * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock, + * set Linux BASE_BAUD to 403200. + */ +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */ +#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */ +#define CFG_BASE_BAUD 691200 + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_UART1_CONSOLE 1 + + +/* The following table includes the supported baudrates */ +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + +/*----------------------------------------------------------------------- + * I2C stuff + *----------------------------------------------------------------------- + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +#define CFG_I2C_NOPROBES { 0x69 } /* avoid iprobe hangup (why?) */ +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 6 /* 24C02 requires 5ms delay */ + +#if (CONFIG_COMMANDS & CFG_CMD_EEPROM) +#define CFG_I2C_EEPROM_ADDR 0x50 /* I2C boot EEPROM (24C02W) */ +#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ +#endif + + +#define CONFIG_SOFT_SPI +#define SPI_SCL spi_scl +#define SPI_SDA spi_sda +#define SPI_READ spi_read() +#define SPI_DELAY udelay(2) +#ifndef __ASSEMBLY__ +void spi_scl(int); +void spi_sda(int); +unsigned char spi_read(void); +#endif + +/* standard dtt sensor configuration */ +#define CONFIG_DTT_DS1775 1 +#define CONFIG_DTT_SENSORS { 0 } + +/*----------------------------------------------------------------------- + * PCI stuff + *----------------------------------------------------------------------- + */ +#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */ +#define PCI_HOST_FORCE 1 /* configure as pci host */ +#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ + +#define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + /* resource configuration */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ + +#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ +#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */ +#define CFG_PCI_CLASSCODE 0x0600 /* PCI Class Code: bridge/host */ +#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */ +#define CFG_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */ +#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ +#define CFG_PCI_PTM2LA 0x00000000 /* disabled */ +#define CFG_PCI_PTM2MS 0x00000000 /* disabled */ +#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */ +#define CONFIG_EEPRO100 1 + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_FLASH_BASE 0xFFE00000 +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ +#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN) + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ + +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_FLASH_ADDR0 0x555 +#define CFG_FLASH_ADDR1 0x2aa +#define CFG_FLASH_WORD_SIZE unsigned short + +#ifdef CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#endif /* CFG_ENV_IS_IN_FLASH */ + +/*----------------------------------------------------------------------- + * NVRAM organization + */ +#define CFG_NVRAM_BASE_ADDR 0xf0000000 /* NVRAM base address */ +#define CFG_NVRAM_SIZE 0x1ff8 /* NVRAM size */ + +#ifdef CFG_ENV_IS_IN_NVRAM +#define CFG_ENV_SIZE 0x0ff8 /* Size of Environment vars */ +#define CFG_ENV_ADDR \ + (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE) /* Env*/ +#endif + +/*----------------------------------------------------------------------- + * PPC405 GPIO Configuration + */ +#define CFG_440_GPIO_TABLE { /* GPIO Alternate1 */ \ +{ \ +/* GPIO Core 0 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO0 PerBLast SPI CS */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO1 TS1E */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO2 TS2E */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO3 TS1O */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO4 TS2O */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO5 TS3 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO6 TS4 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO7 TS5 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO8 TS6 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO9 TrcClk */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO10 PerCS1 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO11 PerCS2 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO12 PerCS3 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO13 PerCS4 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO14 PerAddr03 SPI SCLK */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO15 PerAddr04 SPI DI */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO16 PerAddr05 SPI DO */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO17 IRQ0 PCI INTA */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO18 IRQ1 PCI INTB */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO19 IRQ2 PCI INTC */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO20 IRQ3 PCI INTD */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO21 IRQ4 USB */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO22 IRQ5 EBC */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO23 IRQ6 unused */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO24 UART0_DCD UART1 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO25 UART0_DSR */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO26 UART0_RI */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO27 UART0_DTR */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO28 UART1_Rx UART0 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO29 UART1_Tx */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO30 RejectPkt0 User LED1 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO31 RejectPkt1 User LED2 */ \ +} \ +} + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_DCACHE_SIZE 16384 /* For IBM 405EP CPU */ +#define CFG_CACHELINE_SIZE 32 +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Init Memory Controller: + * + * BR0/1 and OR0/1 (FLASH) + */ + +#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */ +#define FLASH_BASE1_PRELIM 0xFC000000 /* FLASH bank #1 */ + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in data cache) + */ +/* use on chip memory (OCM) for temperary stack until sdram is tested */ +#define CFG_TEMP_STACK_OCM 1 + +/* On Chip Memory location */ +#define CFG_OCM_DATA_ADDR 0xF8000000 +#define CFG_OCM_DATA_SIZE 0x1000 +#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of SDRAM */ +#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */ + +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * External Bus Controller (EBC) Setup + */ + +/* Memory Bank 0 (Flash/SRAM) initialization */ +#define CFG_EBC_PB0AP 0x03815600 +#define CFG_EBC_PB0CR 0xFFE3A000 /* BAS=0xFFE,BS=2MB,BU=R/W,BW=16bit */ + +/* Memory Bank 1 (NVRAM/RTC) initialization */ +#define CFG_EBC_PB1AP 0x05815600 +#define CFG_EBC_PB1CR 0xFC0BA000 /* BAS=0xFc0,BS=32MB,BU=R/W,BW=16bit */ + +/* Memory Bank 2 (USB device) initialization */ +#define CFG_EBC_PB2AP 0x03016600 +#define CFG_EBC_PB2CR 0x50018000 /* BAS=0x500,BS=1MB,BU=R/W,BW=8bit */ + +/* Memory Bank 3 (LCM and D-flip-flop) initialization */ +#define CFG_EBC_PB3AP 0x158FF600 +#define CFG_EBC_PB3CR 0x50118000 /* BAS=0x501,BS=1MB,BU=R/W,BW=8bit */ + +/* Memory Bank 4 (not install) initialization */ +#define CFG_EBC_PB4AP 0x158FF600 +#define CFG_EBC_PB4CR 0x5021A000 + +/*----------------------------------------------------------------------- + * Definitions for GPIO setup (PPC405EP specific) + * + * GPIO0[0] - External Bus Controller BLAST output + * GPIO0[1-9] - Instruction trace outputs + * GPIO0[10-13] - External Bus Controller CS_1 - CS_4 outputs + * GPIO0[14-16] - External Bus Controller ABUS3-ABUS5 outputs + * GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs + * GPIO0[24-27] - UART0 control signal inputs/outputs + * GPIO0[28-29] - UART1 data signal input/output + * GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs + */ +#define CFG_GPIO0_OSRH 0x15555550 /* output select high/low */ +#define CFG_GPIO0_OSRL 0x00000110 +#define CFG_GPIO0_ISR1H 0x00000001 /* input select high/low */ +#define CFG_GPIO0_ISR1L 0x15545440 +#define CFG_GPIO0_TSRH 0x00000000 /* three-state select high/low */ +#define CFG_GPIO0_TSRL 0x00000000 +#define CFG_GPIO0_TCR 0xFFFE8117 /* three-state control */ +#define CFG_GPIO0_ODR 0x00000000 /* open drain */ + +#define GPIO0 0 /* GPIO controller 0 */ + +/* the GPIO macros in include/ppc405.h for High/Low registers are backwards */ + +#define GPIOx_OSL (GPIO0_OSRH-GPIO_BASE) +#define GPIOx_TSL (GPIO0_TSRH-GPIO_BASE) +#define GPIOx_IS1L (GPIO0_ISR1H-GPIO_BASE) +#define GPIOx_IS2L (GPIO0_ISR1H-GPIO_BASE) +#define GPIOx_IS3L (GPIO0_ISR1H-GPIO_BASE) + +#define GPIO_OS(x) (x+GPIOx_OSL) /* GPIO output select */ +#define GPIO_TS(x) (x+GPIOx_TSL) /* GPIO three-state select */ +#define GPIO_IS1(x) (x+GPIOx_IS1L) /* GPIO input select */ +#define GPIO_IS2(x) (x+GPIOx_IS1L) +#define GPIO_IS3(x) (x+GPIOx_IS1L) + +#define CPLD_REG0_ADDR 0x50100000 +#define CPLD_REG1_ADDR 0x50100001 +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +#endif /* __CONFIG_H */ diff --git a/include/dtt.h b/include/dtt.h index 842a761c909..2e8c690158f 100644 --- a/include/dtt.h +++ b/include/dtt.h @@ -29,6 +29,7 @@ #if defined(CONFIG_DTT_LM75) || \ defined(CONFIG_DTT_DS1621) || \ + defined(CONFIG_DTT_DS1775) || \ defined(CONFIG_DTT_LM81) || \ defined(CONFIG_DTT_ADM1021) @@ -78,6 +79,13 @@ extern int dtt_get_temp(int sensor); #define DTT_CONFIG 0xAC #endif +#if defined(CONFIG_DTT_DS1775) +#define DTT_READ_TEMP 0x0 +#define DTT_CONFIG 0x1 +#define DTT_TEMP_HYST 0x2 +#define DTT_TEMP_OS 0x3 +#endif + #if defined(CONFIG_DTT_ADM1021) #define DTT_READ_LOC_VALUE 0x00 #define DTT_READ_REM_VALUE 0x01 -- cgit v1.3.1 From ea9f6bce383cc9fbcdee28b5836109b1a6dba574 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 31 Jul 2007 08:37:01 +0200 Subject: ppc4xx: Update 440EPx lwmon5 board support - Clear ECC status regs after ECC POST test - Set dcbz for ECC generation with caches enabled as default - Code cleanup Signed-off-by: Stefan Roese --- board/lwmon5/sdram.c | 37 +++++++++++++------------------------ include/configs/lwmon5.h | 1 - include/ppc440.h | 13 +++++++++++++ post/board/lwmon5/ecc.c | 12 +++++++++++- post/cpu/ppc4xx/fpu.c | 2 +- 5 files changed, 38 insertions(+), 27 deletions(-) (limited to 'include/configs') diff --git a/board/lwmon5/sdram.c b/board/lwmon5/sdram.c index b6863b6a79b..f906b859a31 100644 --- a/board/lwmon5/sdram.c +++ b/board/lwmon5/sdram.c @@ -473,7 +473,7 @@ static void program_ecc(u32 start_address, blank_string(strlen(str)); } else { /* ECC bit set method for cached memory */ -#if 1 /* test-only: will remove this define later, when ECC problems are solved! */ +#if 0 /* test-only: will remove this define later, when ECC problems are solved! */ /* * Some boards (like lwmon5) need to preserve the memory * content upon ECC generation (for the log-buffer). @@ -486,6 +486,11 @@ static void program_ecc(u32 start_address, current_address = start_address; while (current_address < end_address) { + /* + * TODO: Th following sequence doesn't work correctly. + * Just invalidating and flushing the cache doesn't + * seem to trigger the re-write of the memory. + */ ppcDcbi(current_address); ppcDcbf(current_address); current_address += CFG_CACHELINE_SIZE; @@ -514,19 +519,6 @@ static void program_ecc(u32 start_address, } #endif -static __inline__ u32 get_mcsr(void) -{ - u32 val; - - asm volatile("mfspr %0, 0x23c" : "=r" (val) :); - return val; -} - -static __inline__ void set_mcsr(u32 val) -{ - asm volatile("mtspr 0x23c, %0" : "=r" (val) :); -} - /************************************************************************* * * initdram -- 440EPx's DDR controller is a DENALI Core @@ -534,8 +526,6 @@ static __inline__ void set_mcsr(u32 val) ************************************************************************/ long int initdram (int board_type) { - u32 val; - #if 0 /* test-only: will remove this define later, when ECC problems are solved! */ /* CL=3 */ mtsdram(DDR0_02, 0x00000000); @@ -640,14 +630,6 @@ long int initdram (int board_type) * Perform data eye search if requested. */ denali_core_search_data_eye(CFG_DDR_CACHED_ADDR, CFG_MBYTES_SDRAM << 20); - - /* - * Clear possible errors resulting from data-eye-search. - * If not done, then we could get an interrupt later on when - * exceptions are enabled. - */ - val = get_mcsr(); - set_mcsr(val); #endif #ifdef CONFIG_DDR_ECC @@ -657,5 +639,12 @@ long int initdram (int board_type) program_ecc(CFG_DDR_CACHED_ADDR, CFG_MBYTES_SDRAM << 20, 0); #endif + /* + * Clear possible errors resulting from data-eye-search. + * If not done, then we could get an interrupt later on when + * exceptions are enabled. + */ + set_mcsr(get_mcsr()); + return (CFG_MBYTES_SDRAM << 20); } diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index b09b47830a4..5ebe4404d92 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -140,7 +140,6 @@ /* POST support */ #define CONFIG_POST (CFG_POST_ECC) - #endif /*----------------------------------------------------------------------- diff --git a/include/ppc440.h b/include/ppc440.h index 93c10f12099..38809f34b4b 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -3354,6 +3354,19 @@ typedef struct { unsigned long pciClkSync; /* PCI clock is synchronous */ } PPC440_SYS_INFO; +static inline u32 get_mcsr(void) +{ + u32 val; + + asm volatile("mfspr %0, 0x23c" : "=r" (val) :); + return val; +} + +static inline void set_mcsr(u32 val) +{ + asm volatile("mtspr 0x23c, %0" : "=r" (val) :); +} + #endif /* _ASMLANGUAGE */ #define RESET_VECTOR 0xfffffffc diff --git a/post/board/lwmon5/ecc.c b/post/board/lwmon5/ecc.c index 7f04f9abed9..3fa3ba62435 100644 --- a/post/board/lwmon5/ecc.c +++ b/post/board/lwmon5/ecc.c @@ -236,7 +236,6 @@ int ecc_post_test (int flags) mfsdram(DDR0_00, value); mtsdram(DDR0_00, value | DDR0_00_INT_ACK_ALL); - /* enable full support of ECC */ mfsdram(DDR0_22, value); mtsdram(DDR0_22, (value &~ DDR0_22_CTRL_RAW_MASK) @@ -247,6 +246,17 @@ int ecc_post_test (int flags) if (ret) break; } + + /* clear error status */ + mfsdram(DDR0_00, value); + mtsdram(DDR0_00, value | DDR0_00_INT_ACK_ALL); + + /* + * Clear possible errors resulting from ECC testing. + * If not done, then we could get an interrupt later on when + * exceptions are enabled. + */ + set_mcsr(get_mcsr()); #endif return ret; diff --git a/post/cpu/ppc4xx/fpu.c b/post/cpu/ppc4xx/fpu.c index 27e9ed01afc..0c26fe00e4c 100644 --- a/post/cpu/ppc4xx/fpu.c +++ b/post/cpu/ppc4xx/fpu.c @@ -29,8 +29,8 @@ #if defined(CONFIG_440EP) || \ defined(CONFIG_440EPX) -#include #include +#include int fpu_status(void) -- cgit v1.3.1 From d2f68006627eda6cb6c7f364bddf621dbfd2fc68 Mon Sep 17 00:00:00 2001 From: Eugene OBrien Date: Tue, 31 Jul 2007 10:24:56 +0200 Subject: ppc4xx: Update AMCC Bamboo 440EP support Changed storage type of cfg_simulate_spd_eeprom to const Changed storage type of gpio_tab to stack storage (Cannot access global data declarations in .bss until afer code relocation) Improved SDRAM tests to catch problems where data is not uniquely addressable (e.g. incorrectly programmed SDRAM row or columns) Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules Fixed AM29LV320DT (OpCode Flash) sector map Signed-off-by: Eugene OBrien Signed-off-by: Stefan Roese --- board/amcc/bamboo/bamboo.c | 321 ++++++++++++++++++++++++++++++------------- board/amcc/bamboo/init.S | 3 +- board/amcc/bamboo/u-boot.lds | 2 - board/amcc/common/flash.c | 18 ++- common/flash.c | 10 +- cpu/ppc4xx/44x_spd_ddr.c | 2 +- include/configs/bamboo.h | 2 + 7 files changed, 248 insertions(+), 110 deletions(-) (limited to 'include/configs') diff --git a/board/amcc/bamboo/bamboo.c b/board/amcc/bamboo/bamboo.c index caf66909b99..00c793afd01 100644 --- a/board/amcc/bamboo/bamboo.c +++ b/board/amcc/bamboo/bamboo.c @@ -32,9 +32,170 @@ void ext_bus_cntlr_init(void); void configure_ppc440ep_pins(void); int is_nand_selected(void); -unsigned char cfg_simulate_spd_eeprom[128]; +#if !(defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)) +/************************************************************************* + * + * Bamboo has one bank onboard sdram (plus DIMM) + * + * Fixed memory is composed of : + * MT46V16M16TG-75 from Micron (x 2), 256Mb, 16 M x16, DDR266, + * 13 row add bits, 10 column add bits (but 12 row used only). + * ECC device: MT46V16M8TG-75 from Micron (x 1), 128Mb, x8, DDR266, + * 12 row add bits, 10 column add bits. + * Prepare a subset (only the used ones) of SPD data + * + * Note : if the ECC is enabled (SDRAM_ECC_ENABLE) the size of + * the corresponding bank is divided by 2 due to number of Row addresses + * 12 in the ECC module + * + * Assumes: 64 MB, ECC, non-registered + * PLB @ 133 MHz + * + ************************************************************************/ +const unsigned char cfg_simulate_spd_eeprom[128] = { + 0x80, /* number of SPD bytes used: 128 */ + 0x08, /* total number bytes in SPD device = 256 */ + 0x07, /* DDR ram */ +#ifdef CONFIG_DDR_ECC + 0x0C, /* num Row Addr: 12 */ +#else + 0x0D, /* num Row Addr: 13 */ +#endif + 0x09, /* numColAddr: 9 */ + 0x01, /* numBanks: 1 */ + 0x20, /* Module data width: 32 bits */ + 0x00, /* Module data width continued: +0 */ + 0x04, /* 2.5 Volt */ + 0x75, /* SDRAM Cycle Time (cas latency 2.5) = 7.5 ns */ +#ifdef CONFIG_DDR_ECC + 0x02, /* ECC ON : 02 OFF : 00 */ +#else + 0x00, /* ECC ON : 02 OFF : 00 */ +#endif + 0x82, /* refresh Rate Type: Normal (15.625us) + Self refresh */ + 0, + 0, + 0, + 0x01, /* wcsbc = 1 */ + 0, + 0, + 0x0C, /* casBit (2,2.5) */ + 0, + 0, + 0x00, /* not registered: 0 registered : 0x02*/ + 0, + 0xA0, /* SDRAM Cycle Time (cas latency 2) = 10 ns */ + 0, + 0x00, /* SDRAM Cycle Time (cas latency 1.5) = N.A */ + 0, + 0x50, /* tRpNs = 20 ns */ + 0, + 0x50, /* tRcdNs = 20 ns */ + 45, /* tRasNs */ +#ifdef CONFIG_DDR_ECC + 0x08, /* bankSizeID: 32MB */ +#else + 0x10, /* bankSizeID: 64MB */ +#endif + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0 +}; +#endif -gpio_param_s gpio_tab[GPIO_GROUP_MAX][GPIO_MAX]; #if 0 { /* GPIO Alternate1 Alternate2 Alternate3 */ { @@ -291,73 +452,12 @@ int checkboard(void) return (0); } -#if !(defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)) -/************************************************************************* - * - * init_spd_array -- Bamboo has one bank onboard sdram (plus DIMM) - * - * Fixed memory is composed of : - * MT46V16M16TG-75 from Micron (x 2), 256Mb, 16 M x16, DDR266, - * 13 row add bits, 10 column add bits (but 12 row used only). - * ECC device: MT46V16M8TG-75 from Micron (x 1), 128Mb, x8, DDR266, - * 12 row add bits, 10 column add bits. - * Prepare a subset (only the used ones) of SPD data - * - * Note : if the ECC is enabled (SDRAM_ECC_ENABLE) the size of - * the corresponding bank is divided by 2 due to number of Row addresses - * 12 in the ECC module - * - * Assumes: 64 MB, ECC, non-registered - * PLB @ 133 MHz - * - ************************************************************************/ -static void init_spd_array(void) -{ - cfg_simulate_spd_eeprom[8] = 0x04; /* 2.5 Volt */ - cfg_simulate_spd_eeprom[2] = 0x07; /* DDR ram */ - -#ifdef CONFIG_DDR_ECC - cfg_simulate_spd_eeprom[11] = 0x02; /* ECC ON : 02 OFF : 00 */ - cfg_simulate_spd_eeprom[31] = 0x08; /* bankSizeID: 32MB */ - cfg_simulate_spd_eeprom[3] = 0x0C; /* num Row Addr: 12 */ -#else - cfg_simulate_spd_eeprom[11] = 0x00; /* ECC ON : 02 OFF : 00 */ - cfg_simulate_spd_eeprom[31] = 0x10; /* bankSizeID: 64MB */ - cfg_simulate_spd_eeprom[3] = 0x0D; /* num Row Addr: 13 */ -#endif - - cfg_simulate_spd_eeprom[4] = 0x09; /* numColAddr: 9 */ - cfg_simulate_spd_eeprom[5] = 0x01; /* numBanks: 1 */ - cfg_simulate_spd_eeprom[0] = 0x80; /* number of SPD bytes used: 128 */ - cfg_simulate_spd_eeprom[1] = 0x08; /* total number bytes in SPD device = 256 */ - cfg_simulate_spd_eeprom[21] = 0x00; /* not registered: 0 registered : 0x02*/ - cfg_simulate_spd_eeprom[6] = 0x20; /* Module data width: 32 bits */ - cfg_simulate_spd_eeprom[7] = 0x00; /* Module data width continued: +0 */ - cfg_simulate_spd_eeprom[15] = 0x01; /* wcsbc = 1 */ - cfg_simulate_spd_eeprom[27] = 0x50; /* tRpNs = 20 ns */ - cfg_simulate_spd_eeprom[29] = 0x50; /* tRcdNs = 20 ns */ - - cfg_simulate_spd_eeprom[30] = 45; /* tRasNs */ - - cfg_simulate_spd_eeprom[18] = 0x0C; /* casBit (2,2.5) */ - - cfg_simulate_spd_eeprom[9] = 0x75; /* SDRAM Cycle Time (cas latency 2.5) = 7.5 ns */ - cfg_simulate_spd_eeprom[23] = 0xA0; /* SDRAM Cycle Time (cas latency 2) = 10 ns */ - cfg_simulate_spd_eeprom[25] = 0x00; /* SDRAM Cycle Time (cas latency 1.5) = N.A */ - cfg_simulate_spd_eeprom[12] = 0x82; /* refresh Rate Type: Normal (15.625us) + Self refresh */ -} -#endif long int initdram (int board_type) { #if !(defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)) long dram_size; - /* - * First write simulated values in eeprom array for onboard bank 0 - */ - init_spd_array(); - dram_size = spd_sdram(); return dram_size; @@ -371,11 +471,12 @@ int testdram(void) { unsigned long *mem = (unsigned long *)0; const unsigned long kend = (1024 / sizeof(unsigned long)); - unsigned long k, n; + unsigned long k, n, *p32, ctr; + const unsigned long bend = CFG_MBYTES_SDRAM * 1024 * 1024; mtmsr(0); - for (k = 0; k < CFG_KBYTES_SDRAM; + for (k = 0; k < CFG_MBYTES_SDRAM*1024; ++k, mem += (1024 / sizeof(unsigned long))) { if ((k & 1023) == 0) { printf("%3d MB\r", k / 1024); @@ -399,6 +500,34 @@ int testdram(void) } } } + + /* + * Perform a sequence test to ensure that all + * memory locations are uniquely addressable + */ + ctr = 0; + p32 = 0; + while ((unsigned long)p32 != bend) { + if (0 == ((unsigned long)p32 & ((1<<20)-1))) + printf("Writing %3d MB\r", (unsigned long)p32 >> 20); + *p32++ = ctr++; + } + + ctr = 0; + p32 = 0; + while ((unsigned long)p32 != bend) { + if (0 == ((unsigned long)p32 & ((1<<20)-1))) + printf("Verifying %3d MB\r", (unsigned long)p32 >> 20); + + if (*p32 != ctr) { + printf("SDRAM test fails at: %08x\n", p32); + return 1; + } + + ctr++; + p32++; + } + printf("SDRAM test passes\n"); return 0; } @@ -1211,7 +1340,7 @@ void uart_selection_in_fpga(uart_config_nb_t uart_config) /*----------------------------------------------------------------------------+ | init_default_gpio +----------------------------------------------------------------------------*/ -void init_default_gpio(void) +void init_default_gpio(gpio_param_s (*gpio_tab)[GPIO_MAX]) { int i; @@ -1281,7 +1410,7 @@ void init_default_gpio(void) | +----------------------------------------------------------------------------*/ -void update_uart_ios(uart_config_nb_t uart_config) +void update_uart_ios(uart_config_nb_t uart_config, gpio_param_s (*gpio_tab)[GPIO_MAX]) { switch (uart_config) { @@ -1409,7 +1538,7 @@ void update_uart_ios(uart_config_nb_t uart_config) /*----------------------------------------------------------------------------+ | update_ndfc_ios(void). +----------------------------------------------------------------------------*/ -void update_ndfc_ios(void) +void update_ndfc_ios(gpio_param_s (*gpio_tab)[GPIO_MAX]) { /* Update GPIO Configuration Table */ gpio_tab[GPIO0][6].in_out = GPIO_OUT; /* EBC_CS_N(1) */ @@ -1427,7 +1556,7 @@ void update_ndfc_ios(void) /*----------------------------------------------------------------------------+ | update_zii_ios(void). +----------------------------------------------------------------------------*/ -void update_zii_ios(void) +void update_zii_ios(gpio_param_s (*gpio_tab)[GPIO_MAX]) { /* Update GPIO Configuration Table */ gpio_tab[GPIO0][12].in_out = GPIO_IN; /* ZII_p0Rxd(0) */ @@ -1477,7 +1606,7 @@ void update_zii_ios(void) /*----------------------------------------------------------------------------+ | update_uic_0_3_irq_ios(). +----------------------------------------------------------------------------*/ -void update_uic_0_3_irq_ios(void) +void update_uic_0_3_irq_ios(gpio_param_s (*gpio_tab)[GPIO_MAX]) { gpio_tab[GPIO1][8].in_out = GPIO_IN; /* UIC_IRQ(0) */ gpio_tab[GPIO1][8].alt_nb = GPIO_ALT1; @@ -1495,7 +1624,7 @@ void update_uic_0_3_irq_ios(void) /*----------------------------------------------------------------------------+ | update_uic_4_9_irq_ios(). +----------------------------------------------------------------------------*/ -void update_uic_4_9_irq_ios(void) +void update_uic_4_9_irq_ios(gpio_param_s (*gpio_tab)[GPIO_MAX]) { gpio_tab[GPIO1][12].in_out = GPIO_IN; /* UIC_IRQ(4) */ gpio_tab[GPIO1][12].alt_nb = GPIO_ALT1; @@ -1516,7 +1645,7 @@ void update_uic_4_9_irq_ios(void) /*----------------------------------------------------------------------------+ | update_dma_a_b_ios(). +----------------------------------------------------------------------------*/ -void update_dma_a_b_ios(void) +void update_dma_a_b_ios(gpio_param_s (*gpio_tab)[GPIO_MAX]) { gpio_tab[GPIO1][12].in_out = GPIO_OUT; /* DMA_ACK(1) */ gpio_tab[GPIO1][12].alt_nb = GPIO_ALT2; @@ -1537,7 +1666,7 @@ void update_dma_a_b_ios(void) /*----------------------------------------------------------------------------+ | update_dma_c_d_ios(). +----------------------------------------------------------------------------*/ -void update_dma_c_d_ios(void) +void update_dma_c_d_ios(gpio_param_s (*gpio_tab)[GPIO_MAX]) { gpio_tab[GPIO0][0].in_out = GPIO_IN; /* DMA_REQ(2) */ gpio_tab[GPIO0][0].alt_nb = GPIO_ALT2; @@ -1562,7 +1691,7 @@ void update_dma_c_d_ios(void) /*----------------------------------------------------------------------------+ | update_ebc_master_ios(). +----------------------------------------------------------------------------*/ -void update_ebc_master_ios(void) +void update_ebc_master_ios(gpio_param_s (*gpio_tab)[GPIO_MAX]) { gpio_tab[GPIO0][27].in_out = GPIO_IN; /* EXT_EBC_REQ */ gpio_tab[GPIO0][27].alt_nb = GPIO_ALT1; @@ -1580,7 +1709,7 @@ void update_ebc_master_ios(void) /*----------------------------------------------------------------------------+ | update_usb2_device_ios(). +----------------------------------------------------------------------------*/ -void update_usb2_device_ios(void) +void update_usb2_device_ios(gpio_param_s (*gpio_tab)[GPIO_MAX]) { gpio_tab[GPIO0][26].in_out = GPIO_IN; /* USB2D_RXVALID */ gpio_tab[GPIO0][26].alt_nb = GPIO_ALT2; @@ -1611,20 +1740,21 @@ void update_usb2_device_ios(void) /*----------------------------------------------------------------------------+ | update_pci_patch_ios(). +----------------------------------------------------------------------------*/ -void update_pci_patch_ios(void) +void update_pci_patch_ios(gpio_param_s (*gpio_tab)[GPIO_MAX]) { gpio_tab[GPIO0][29].in_out = GPIO_OUT; /* EBC_EXT_HDLA */ gpio_tab[GPIO0][29].alt_nb = GPIO_ALT1; } /*----------------------------------------------------------------------------+ - | set_chip_gpio_configuration(unsigned char gpio_core) + | set_chip_gpio_configuration(unsigned char gpio_core, + | gpio_param_s (*gpio_tab)[GPIO_MAX]) | Put the core impacted by clock modification and sharing in reset. | Config the select registers to resolve the sharing depending of the config. | Configure the GPIO registers. | +----------------------------------------------------------------------------*/ -void set_chip_gpio_configuration(unsigned char gpio_core) +void set_chip_gpio_configuration(unsigned char gpio_core, gpio_param_s (*gpio_tab)[GPIO_MAX]) { unsigned char i=0, j=0, reg_offset = 0; unsigned long gpio_reg, gpio_core_add; @@ -1778,11 +1908,12 @@ void configure_ppc440ep_pins(void) CORE_NOT_SELECTED /* PCI_PATCH */ }; + gpio_param_s gpio_tab[GPIO_GROUP_MAX][GPIO_MAX]; /* Table Default Initialisation + FPGA Access */ - init_default_gpio(); - set_chip_gpio_configuration(GPIO0); - set_chip_gpio_configuration(GPIO1); + init_default_gpio(gpio_tab); + set_chip_gpio_configuration(GPIO0, gpio_tab); + set_chip_gpio_configuration(GPIO1, gpio_tab); /* Update Table */ force_bup_core_selection(ppc440ep_core_selection, &config_val); @@ -1817,7 +1948,7 @@ void configure_ppc440ep_pins(void) /* UIC 0:3 Selection */ if (ppc440ep_core_selection[UIC_0_3] == CORE_SELECTED) { - update_uic_0_3_irq_ios(); + update_uic_0_3_irq_ios(gpio_tab); dma_a_b_unselect_in_fpga(); } @@ -1825,21 +1956,21 @@ void configure_ppc440ep_pins(void) if (ppc440ep_core_selection[UIC_4_9] == CORE_SELECTED) { sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_DIS_MASK) | SDR0_PFC1_DIS_UICIRQ5_SEL; - update_uic_4_9_irq_ios(); + update_uic_4_9_irq_ios(gpio_tab); } /* DMA AB Selection */ if (ppc440ep_core_selection[DMA_CHANNEL_AB] == CORE_SELECTED) { sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_DIS_MASK) | SDR0_PFC1_DIS_DMAR_SEL; - update_dma_a_b_ios(); + update_dma_a_b_ios(gpio_tab); dma_a_b_selection_in_fpga(); } /* DMA CD Selection */ if (ppc440ep_core_selection[DMA_CHANNEL_CD] == CORE_SELECTED) { - update_dma_c_d_ios(); + update_dma_c_d_ios(gpio_tab); dma_c_d_selection_in_fpga(); } @@ -1848,14 +1979,14 @@ void configure_ppc440ep_pins(void) { sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_ERE_MASK) | SDR0_PFC1_ERE_EXTR_SEL; sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_UES_MASK) | SDR0_PFC1_UES_EBCHR_SEL; - update_ebc_master_ios(); + update_ebc_master_ios(gpio_tab); } /* PCI Patch Enable */ if (ppc440ep_core_selection[PCI_PATCH] == CORE_SELECTED) { sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_UES_MASK) | SDR0_PFC1_UES_EBCHR_SEL; - update_pci_patch_ios(); + update_pci_patch_ios(gpio_tab); } /* USB2 Host Selection - Not Implemented in PowerPC 440EP Pass1 */ @@ -1871,7 +2002,7 @@ void configure_ppc440ep_pins(void) /* USB2.0 Device Selection */ if (ppc440ep_core_selection[USB2_DEVICE] == CORE_SELECTED) { - update_usb2_device_ios(); + update_usb2_device_ios(gpio_tab); sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_UES_MASK) | SDR0_PFC1_UES_USB2D_SEL; sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_UPR_MASK) | SDR0_PFC1_UPR_DISABLE; @@ -1904,7 +2035,7 @@ void configure_ppc440ep_pins(void) /* NAND Flash Selection */ if (ppc440ep_core_selection[NAND_FLASH] == CORE_SELECTED) { - update_ndfc_ios(); + update_ndfc_ios(gpio_tab); #if !(defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)) mtsdr(sdr_cust0, SDR0_CUST0_MUX_NDFC_SEL | @@ -1933,7 +2064,7 @@ void configure_ppc440ep_pins(void) /* MII Selection */ if (ppc440ep_core_selection[MII_SEL] == CORE_SELECTED) { - update_zii_ios(); + update_zii_ios(gpio_tab); mfsdr(sdr_mfr, sdr0_mfr); sdr0_mfr = (sdr0_mfr & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_MII; mtsdr(sdr_mfr, sdr0_mfr); @@ -1944,7 +2075,7 @@ void configure_ppc440ep_pins(void) /* RMII Selection */ if (ppc440ep_core_selection[RMII_SEL] == CORE_SELECTED) { - update_zii_ios(); + update_zii_ios(gpio_tab); mfsdr(sdr_mfr, sdr0_mfr); sdr0_mfr = (sdr0_mfr & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_RMII_10M; mtsdr(sdr_mfr, sdr0_mfr); @@ -1955,7 +2086,7 @@ void configure_ppc440ep_pins(void) /* SMII Selection */ if (ppc440ep_core_selection[SMII_SEL] == CORE_SELECTED) { - update_zii_ios(); + update_zii_ios(gpio_tab); mfsdr(sdr_mfr, sdr0_mfr); sdr0_mfr = (sdr0_mfr & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_SMII; mtsdr(sdr_mfr, sdr0_mfr); @@ -1992,7 +2123,7 @@ void configure_ppc440ep_pins(void) sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U1ME_MASK) | SDR0_PFC1_U1ME_DSR_DTR; break; } - update_uart_ios(uart_configuration); + update_uart_ios(uart_configuration, gpio_tab); /* UART Selection in all cases */ uart_selection_in_fpga(uart_configuration); @@ -2014,8 +2145,8 @@ void configure_ppc440ep_pins(void) /* Perform effective access to hardware */ mtsdr(sdr_pfc1, sdr0_pfc1); - set_chip_gpio_configuration(GPIO0); - set_chip_gpio_configuration(GPIO1); + set_chip_gpio_configuration(GPIO0, gpio_tab); + set_chip_gpio_configuration(GPIO1, gpio_tab); /* USB2.0 Device Reset must be done after GPIO setting */ if (ppc440ep_core_selection[USB2_DEVICE] == CORE_SELECTED) diff --git a/board/amcc/bamboo/init.S b/board/amcc/bamboo/init.S index 1459eec3638..f4d2ae3f410 100644 --- a/board/amcc/bamboo/init.S +++ b/board/amcc/bamboo/init.S @@ -51,13 +51,12 @@ tlbtab: tlbentry(CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G) #else tlbentry(CFG_NAND_BOOT_SPL_SRC, SZ_4K, CFG_NAND_BOOT_SPL_SRC, 0, AC_R|AC_W|AC_X|SA_G) + tlbentry(CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I) #endif /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ tlbentry(CFG_INIT_RAM_ADDR, SZ_4K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G) - tlbentry(CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I) - /* PCI base & peripherals */ tlbentry(CFG_PCI_BASE, SZ_256M, CFG_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I) diff --git a/board/amcc/bamboo/u-boot.lds b/board/amcc/bamboo/u-boot.lds index f6d7183199e..0375618d726 100644 --- a/board/amcc/bamboo/u-boot.lds +++ b/board/amcc/bamboo/u-boot.lds @@ -141,8 +141,6 @@ SECTIONS *(COMMON) } - ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified."); - _end = . ; PROVIDE (end = .); } diff --git a/board/amcc/common/flash.c b/board/amcc/common/flash.c index e6429ecd136..eba0511f262 100644 --- a/board/amcc/common/flash.c +++ b/board/amcc/common/flash.c @@ -745,19 +745,27 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info) if (info->flash_id & FLASH_BTYPE) { /* set sector offsets for bottom boot block type */ info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00004000; - info->start[2] = base + 0x00006000; - info->start[3] = base + 0x00008000; - for (i = 4; i < info->sector_count; i++) { + info->start[1] = base + 0x00002000; + info->start[2] = base + 0x00004000; + info->start[3] = base + 0x00006000; + info->start[4] = base + 0x00008000; + info->start[5] = base + 0x0000a000; + info->start[6] = base + 0x0000c000; + info->start[7] = base + 0x0000e000; + for (i = 8; i < info->sector_count; i++) { info->start[i] = - base + (i * 0x00010000) - 0x00030000; + base + ((i-7) * 0x00010000); } } else { /* set sector offsets for top boot block type */ i = info->sector_count - 1; + info->start[i--] = base + info->size - 0x00002000; info->start[i--] = base + info->size - 0x00004000; info->start[i--] = base + info->size - 0x00006000; info->start[i--] = base + info->size - 0x00008000; + info->start[i--] = base + info->size - 0x0000a000; + info->start[i--] = base + info->size - 0x0000c000; + info->start[i--] = base + info->size - 0x0000e000; for (; i >= 0; i--) { info->start[i] = base + i * 0x00010000; } diff --git a/common/flash.c b/common/flash.c index a64bc985299..888ff9c67c6 100644 --- a/common/flash.c +++ b/common/flash.c @@ -47,16 +47,16 @@ flash_protect (int flag, ulong from, ulong to, flash_info_t *info) short s_end = info->sector_count - 1; /* index of last sector */ int i; - debug ("flash_protect %s: from 0x%08lX to 0x%08lX\n", - (flag & FLAG_PROTECT_SET) ? "ON" : - (flag & FLAG_PROTECT_CLEAR) ? "OFF" : "???", - from, to); - /* Do nothing if input data is bad. */ if (info->sector_count == 0 || info->size == 0 || to < from) { return; } + debug ("flash_protect %s: from 0x%08lX to 0x%08lX\n", + (flag & FLAG_PROTECT_SET) ? "ON" : + (flag & FLAG_PROTECT_CLEAR) ? "OFF" : "???", + from, to); + /* There is nothing to do if we have no data about the flash * or the protect range and flash range don't overlap. */ diff --git a/cpu/ppc4xx/44x_spd_ddr.c b/cpu/ppc4xx/44x_spd_ddr.c index e5f296eb068..4a4c6f29edf 100644 --- a/cpu/ppc4xx/44x_spd_ddr.c +++ b/cpu/ppc4xx/44x_spd_ddr.c @@ -269,7 +269,7 @@ struct bank_param { typedef struct bank_param BANKPARMS; #ifdef CFG_SIMULATE_SPD_EEPROM -extern unsigned char cfg_simulate_spd_eeprom[128]; +extern const unsigned char cfg_simulate_spd_eeprom[128]; #endif static unsigned char spd_read(uchar chip, uint addr); diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h index d58344d7177..4e00b9f77dc 100644 --- a/include/configs/bamboo.h +++ b/include/configs/bamboo.h @@ -222,6 +222,8 @@ #define CFG_SIMULATE_SPD_EEPROM 0xff /* simulate spd eeprom on this address */ #define SPD_EEPROM_ADDRESS {CFG_SIMULATE_SPD_EEPROM, 0x50, 0x51} #define CFG_MBYTES_SDRAM (64) /* 64MB fixed size for early-sdram-init */ +#define CONFIG_PROG_SDRAM_TLB +#undef CFG_DRAM_TEST /*----------------------------------------------------------------------- * I2C -- cgit v1.3.1 From 9998bd37ead85e93953559720710d3b0685c81e6 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Sun, 5 Aug 2007 03:19:10 -0500 Subject: Renamed CONFIG_MCFSERIAL to CONFIG_MCFUART Signed-off-by: TsiChungLiew --- drivers/serial/mcfuart.c | 4 ++-- include/configs/M5329EVB.h | 6 ++---- 2 files changed, 4 insertions(+), 6 deletions(-) (limited to 'include/configs') diff --git a/drivers/serial/mcfuart.c b/drivers/serial/mcfuart.c index f54aabec268..39d4e18166b 100644 --- a/drivers/serial/mcfuart.c +++ b/drivers/serial/mcfuart.c @@ -33,7 +33,7 @@ DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_MCFSERIAL +#ifdef CONFIG_MCFUART int serial_init(void) { volatile uart_t *uart; @@ -124,4 +124,4 @@ void serial_setbrg(void) uart->ucr = UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED; } -#endif /* CONFIG_MCFSERIAL */ +#endif /* CONFIG_MCFUART */ diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index d1ac3400481..50be03fe378 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -39,7 +39,8 @@ #undef DEBUG -#define CONFIG_MCFSERIAL +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) #define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } @@ -84,9 +85,6 @@ # endif /* CFG_DISCOVER_PHY */ #endif -#define CONFIG_MCFUART -#define CFG_UART_PORT (0) - #define CONFIG_MCFRTC #undef RTC_DEBUG -- cgit v1.3.1 From eaf9e447beb3e498818ef8ad0b8c1597cd506149 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Sun, 5 Aug 2007 04:11:20 -0500 Subject: Added I2C support Signed-off-by: TsiChungLiew --- include/asm-m68k/fsl_i2c.h | 86 ++++++++++++++++++++++++++++++++++++++++++++++ include/configs/M5329EVB.h | 52 +++++++++++++++++----------- 2 files changed, 117 insertions(+), 21 deletions(-) create mode 100644 include/asm-m68k/fsl_i2c.h (limited to 'include/configs') diff --git a/include/asm-m68k/fsl_i2c.h b/include/asm-m68k/fsl_i2c.h new file mode 100644 index 00000000000..4f71341327b --- /dev/null +++ b/include/asm-m68k/fsl_i2c.h @@ -0,0 +1,86 @@ +/* + * Freescale I2C Controller + * + * Copyright 2006 Freescale Semiconductor, Inc. + * + * Based on earlier versions by Gleb Natapov , + * Xianghua Xiao , Eran Liberty (liberty@freescale.com), + * and Jeff Brown. + * Some bits are taken from linux driver writen by adrian@humboldt.co.uk. + * + * This software may be used and distributed according to the + * terms of the GNU Public License, Version 2, incorporated + * herein by reference. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _ASM_FSL_I2C_H_ +#define _ASM_FSL_I2C_H_ + +#include + +typedef struct fsl_i2c { + + u8 adr; /* I2C slave address */ + u8 res0[3]; +#define I2C_ADR 0xFE +#define I2C_ADR_SHIFT 1 +#define I2C_ADR_RES ~(I2C_ADR) + + u8 fdr; /* I2C frequency divider register */ + u8 res1[3]; +#define IC2_FDR 0x3F +#define IC2_FDR_SHIFT 0 +#define IC2_FDR_RES ~(IC2_FDR) + + u8 cr; /* I2C control redister */ + u8 res2[3]; +#define I2C_CR_MEN 0x80 +#define I2C_CR_MIEN 0x40 +#define I2C_CR_MSTA 0x20 +#define I2C_CR_MTX 0x10 +#define I2C_CR_TXAK 0x08 +#define I2C_CR_RSTA 0x04 +#define I2C_CR_BCST 0x01 + + u8 sr; /* I2C status register */ + u8 res3[3]; +#define I2C_SR_MCF 0x80 +#define I2C_SR_MAAS 0x40 +#define I2C_SR_MBB 0x20 +#define I2C_SR_MAL 0x10 +#define I2C_SR_BCSTM 0x08 +#define I2C_SR_SRW 0x04 +#define I2C_SR_MIF 0x02 +#define I2C_SR_RXAK 0x01 + + u8 dr; /* I2C data register */ + u8 res4[3]; +#define I2C_DR 0xFF +#define I2C_DR_SHIFT 0 +#define I2C_DR_RES ~(I2C_DR) + + u8 dfsrr; /* I2C digital filter sampling rate register */ + u8 res5[3]; +#define I2C_DFSRR 0x3F +#define I2C_DFSRR_SHIFT 0 +#define I2C_DFSRR_RES ~(I2C_DR) + + /* Fill out the reserved block */ + u8 res6[0xE8]; +} fsl_i2c_t; + +#endif /* _ASM_I2C_H_ */ diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index 50be03fe378..605684bee36 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -52,6 +52,7 @@ CFG_CMD_DATE | \ CFG_CMD_ELF | \ CFG_CMD_FLASH | \ + CFG_CMD_I2C | \ (CFG_CMD_LOADB | CFG_CMD_LOADS) | \ CFG_CMD_MEMORY | \ CFG_CMD_MISC | \ @@ -65,15 +66,15 @@ #define CONFIG_MCFFEC #ifdef CONFIG_MCFFEC -# define CONFIG_NET_MULTI 1 +# define CONFIG_NET_MULTI 1 # define CONFIG_MII 1 # define CFG_DISCOVER_PHY # define CFG_RX_ETH_BUFFER 8 # define CFG_FAULT_ECHO_LINK_DOWN -# define CFG_FEC0_PINMUX 0 -# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE -# define MCFFEC_TOUT_LOOP 50000 +# define CFG_FEC0_PINMUX 0 +# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 /* If CFG_DISCOVER_PHY is not defined - hardcoded */ # ifndef CFG_DISCOVER_PHY # define FECDUPLEX FULL @@ -92,14 +93,23 @@ #define CONFIG_MCFTMR #undef CONFIG_MCFPIT +/* I2C */ +#define CONFIG_FSL_I2C +#define CONFIG_HARD_I2C /* I2C with hw support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 80000 +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_OFFSET 0x58000 +#define CFG_IMMR CFG_MBAR + /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include #define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ #ifdef CONFIG_MCFFEC -# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 -# define CONFIG_IPADDR 192.162.1.2 -# define CONFIG_NETMASK 255.255.255.0 -# define CONFIG_SERVERIP 192.162.1.1 +# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 +# define CONFIG_IPADDR 192.162.1.2 +# define CONFIG_NETMASK 255.255.255.0 +# define CONFIG_SERVERIP 192.162.1.1 # define CONFIG_GATEWAYIP 192.162.1.1 # define CONFIG_OVERWRITE_ETHADDR_ONCE #endif /* FEC_ENET */ @@ -117,26 +127,26 @@ "save\0" \ "" -#define CONFIG_PRAM 512 /* 512 KB */ -#define CFG_PROMPT "-> " +#define CONFIG_PRAM 512 /* 512 KB */ +#define CFG_PROMPT "-> " #define CFG_LONGHELP /* undef to save memory */ #if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else -# define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +# define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #endif #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_LOAD_ADDR 0x40010000 -#define CFG_HZ 1000 -#define CFG_CLK 80000000 -#define CFG_CPU_CLK CFG_CLK * 3 +#define CFG_HZ 1000 +#define CFG_CLK 80000000 +#define CFG_CPU_CLK CFG_CLK * 3 -#define CFG_MBAR 0xFC000000 +#define CFG_MBAR 0xFC000000 /* * Low Level Configuration Settings @@ -190,13 +200,13 @@ # define CFG_FLASH_CFI_DRIVER 1 # define CFG_FLASH_SIZE 0x800000 /* Max size that the board might have */ # define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT -# define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -# define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ +# define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +# define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ # define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ #endif -#define CFG_FLASH_BASE 0 -#define CFG_FLASH0_BASE (CFG_CS0_BASE << 16) +#define CFG_FLASH_BASE 0 +#define CFG_FLASH0_BASE (CFG_CS0_BASE << 16) /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash -- cgit v1.3.1 From 1a33ce65a4c51a69190dd8c408f9e1c62a66e94f Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Sun, 5 Aug 2007 04:31:18 -0500 Subject: Added NAND support Signed-off-by: TsiChungLiew --- board/freescale/m5329evb/Makefile | 2 +- board/freescale/m5329evb/nand.c | 115 +++++++++++++++++++++++++++++++ include/asm-m68k/bitops.h | 39 +++++++++++ include/asm-m68k/errno.h | 138 ++++++++++++++++++++++++++++++++++++++ include/configs/M5329EVB.h | 27 +++++++- 5 files changed, 317 insertions(+), 4 deletions(-) create mode 100644 board/freescale/m5329evb/nand.c create mode 100644 include/asm-m68k/errno.h (limited to 'include/configs') diff --git a/board/freescale/m5329evb/Makefile b/board/freescale/m5329evb/Makefile index 74c25286982..ab0f11e9d0f 100644 --- a/board/freescale/m5329evb/Makefile +++ b/board/freescale/m5329evb/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o mii.o +COBJS = $(BOARD).o mii.o nand.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/freescale/m5329evb/nand.c b/board/freescale/m5329evb/nand.c new file mode 100644 index 00000000000..2a4ca713770 --- /dev/null +++ b/board/freescale/m5329evb/nand.c @@ -0,0 +1,115 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#if (CONFIG_COMMANDS & CFG_CMD_NAND) +#include +#include + +#define SET_CLE 0x10 +#define CLR_CLE ~SET_CLE +#define SET_ALE 0x08 +#define CLR_ALE ~SET_ALE + +static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd) +{ + struct nand_chip *this = mtdinfo->priv; + volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; + u32 nand_baseaddr = (u32) this->IO_ADDR_W; + + switch (cmd) { + case NAND_CTL_SETNCE: + case NAND_CTL_CLRNCE: + break; + case NAND_CTL_SETCLE: + nand_baseaddr |= SET_CLE; + break; + case NAND_CTL_CLRCLE: + nand_baseaddr &= CLR_CLE; + break; + case NAND_CTL_SETALE: + nand_baseaddr |= SET_ALE; + break; + case NAND_CTL_CLRALE: + nand_baseaddr |= CLR_ALE; + break; + case NAND_CTL_SETWP: + fbcs->csmr2 |= CSMR_WP; + break; + case NAND_CTL_CLRWP: + fbcs->csmr2 &= ~CSMR_WP; + break; + } + this->IO_ADDR_W = (void __iomem *)(nand_baseaddr); +} + +static void nand_write_byte(struct mtd_info *mtdinfo, u_char byte) +{ + struct nand_chip *this = mtdinfo->priv; + *((volatile u8 *)(this->IO_ADDR_W)) = byte; +} + +static u8 nand_read_byte(struct mtd_info *mtdinfo) +{ + struct nand_chip *this = mtdinfo->priv; + return (u8) (*((volatile u8 *)this->IO_ADDR_R)); +} + +static int nand_dev_ready(struct mtd_info *mtdinfo) +{ + return 1; +} + +int board_nand_init(struct nand_chip *nand) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + *((volatile u16 *)CFG_LATCH_ADDR) |= 0x0004; + + /* set up pin configuration */ + gpio->par_timer &= ~GPIO_PAR_TIN3_TIN3; + gpio->pddr_timer |= 0x08; + gpio->ppd_timer |= 0x08; + gpio->pclrr_timer = 0; + gpio->podr_timer = 0; + + nand->chip_delay = 50; + nand->eccmode = NAND_ECC_SOFT; + nand->hwcontrol = nand_hwcontrol; + nand->read_byte = nand_read_byte; + nand->write_byte = nand_write_byte; + nand->dev_ready = nand_dev_ready; + + return 0; +} +#endif + diff --git a/include/asm-m68k/bitops.h b/include/asm-m68k/bitops.h index 32837142c8e..0f9e8abe9c1 100644 --- a/include/asm-m68k/bitops.h +++ b/include/asm-m68k/bitops.h @@ -15,4 +15,43 @@ extern int test_and_set_bit(int nr, volatile void *addr); extern int test_and_clear_bit(int nr, volatile void *addr); extern int test_and_change_bit(int nr, volatile void *addr); +#ifdef __KERNEL__ + +/* + * ffs: find first bit set. This is defined the same way as + * the libc and compiler builtin ffs routines, therefore + * differs in spirit from the above ffz (man ffs). + */ +extern __inline__ int ffs(int x) +{ + int r = 1; + + if (!x) + return 0; + if (!(x & 0xffff)) { + x >>= 16; + r += 16; + } + if (!(x & 0xff)) { + x >>= 8; + r += 8; + } + if (!(x & 0xf)) { + x >>= 4; + r += 4; + } + if (!(x & 3)) { + x >>= 2; + r += 2; + } + if (!(x & 1)) { + x >>= 1; + r += 1; + } + return r; +} +#define __ffs(x) (ffs(x) - 1) + +#endif /* __KERNEL__ */ + #endif /* _M68K_BITOPS_H */ diff --git a/include/asm-m68k/errno.h b/include/asm-m68k/errno.h new file mode 100644 index 00000000000..ff364b820ae --- /dev/null +++ b/include/asm-m68k/errno.h @@ -0,0 +1,138 @@ +#ifndef _PPC_ERRNO_H +#define _PPC_ERRNO_H + +#define EPERM 1 /* Operation not permitted */ +#define ENOENT 2 /* No such file or directory */ +#define ESRCH 3 /* No such process */ +#define EINTR 4 /* Interrupted system call */ +#define EIO 5 /* I/O error */ +#define ENXIO 6 /* No such device or address */ +#define E2BIG 7 /* Arg list too long */ +#define ENOEXEC 8 /* Exec format error */ +#define EBADF 9 /* Bad file number */ +#define ECHILD 10 /* No child processes */ +#define EAGAIN 11 /* Try again */ +#define ENOMEM 12 /* Out of memory */ +#define EACCES 13 /* Permission denied */ +#define EFAULT 14 /* Bad address */ +#define ENOTBLK 15 /* Block device required */ +#define EBUSY 16 /* Device or resource busy */ +#define EEXIST 17 /* File exists */ +#define EXDEV 18 /* Cross-device link */ +#define ENODEV 19 /* No such device */ +#define ENOTDIR 20 /* Not a directory */ +#define EISDIR 21 /* Is a directory */ +#define EINVAL 22 /* Invalid argument */ +#define ENFILE 23 /* File table overflow */ +#define EMFILE 24 /* Too many open files */ +#define ENOTTY 25 /* Not a typewriter */ +#define ETXTBSY 26 /* Text file busy */ +#define EFBIG 27 /* File too large */ +#define ENOSPC 28 /* No space left on device */ +#define ESPIPE 29 /* Illegal seek */ +#define EROFS 30 /* Read-only file system */ +#define EMLINK 31 /* Too many links */ +#define EPIPE 32 /* Broken pipe */ +#define EDOM 33 /* Math argument out of domain of func */ +#define ERANGE 34 /* Math result not representable */ +#define EDEADLK 35 /* Resource deadlock would occur */ +#define ENAMETOOLONG 36 /* File name too long */ +#define ENOLCK 37 /* No record locks available */ +#define ENOSYS 38 /* Function not implemented */ +#define ENOTEMPTY 39 /* Directory not empty */ +#define ELOOP 40 /* Too many symbolic links encountered */ +#define EWOULDBLOCK EAGAIN /* Operation would block */ +#define ENOMSG 42 /* No message of desired type */ +#define EIDRM 43 /* Identifier removed */ +#define ECHRNG 44 /* Channel number out of range */ +#define EL2NSYNC 45 /* Level 2 not synchronized */ +#define EL3HLT 46 /* Level 3 halted */ +#define EL3RST 47 /* Level 3 reset */ +#define ELNRNG 48 /* Link number out of range */ +#define EUNATCH 49 /* Protocol driver not attached */ +#define ENOCSI 50 /* No CSI structure available */ +#define EL2HLT 51 /* Level 2 halted */ +#define EBADE 52 /* Invalid exchange */ +#define EBADR 53 /* Invalid request descriptor */ +#define EXFULL 54 /* Exchange full */ +#define ENOANO 55 /* No anode */ +#define EBADRQC 56 /* Invalid request code */ +#define EBADSLT 57 /* Invalid slot */ +#define EDEADLOCK 58 /* File locking deadlock error */ +#define EBFONT 59 /* Bad font file format */ +#define ENOSTR 60 /* Device not a stream */ +#define ENODATA 61 /* No data available */ +#define ETIME 62 /* Timer expired */ +#define ENOSR 63 /* Out of streams resources */ +#define ENONET 64 /* Machine is not on the network */ +#define ENOPKG 65 /* Package not installed */ +#define EREMOTE 66 /* Object is remote */ +#define ENOLINK 67 /* Link has been severed */ +#define EADV 68 /* Advertise error */ +#define ESRMNT 69 /* Srmount error */ +#define ECOMM 70 /* Communication error on send */ +#define EPROTO 71 /* Protocol error */ +#define EMULTIHOP 72 /* Multihop attempted */ +#define EDOTDOT 73 /* RFS specific error */ +#define EBADMSG 74 /* Not a data message */ +#define EOVERFLOW 75 /* Value too large for defined data type */ +#define ENOTUNIQ 76 /* Name not unique on network */ +#define EBADFD 77 /* File descriptor in bad state */ +#define EREMCHG 78 /* Remote address changed */ +#define ELIBACC 79 /* Can not access a needed shared library */ +#define ELIBBAD 80 /* Accessing a corrupted shared library */ +#define ELIBSCN 81 /* .lib section in a.out corrupted */ +#define ELIBMAX 82 /* Attempting to link in too many shared libraries */ +#define ELIBEXEC 83 /* Cannot exec a shared library directly */ +#define EILSEQ 84 /* Illegal byte sequence */ +#define ERESTART 85 /* Interrupted system call should be restarted */ +#define ESTRPIPE 86 /* Streams pipe error */ +#define EUSERS 87 /* Too many users */ +#define ENOTSOCK 88 /* Socket operation on non-socket */ +#define EDESTADDRREQ 89 /* Destination address required */ +#define EMSGSIZE 90 /* Message too long */ +#define EPROTOTYPE 91 /* Protocol wrong type for socket */ +#define ENOPROTOOPT 92 /* Protocol not available */ +#define EPROTONOSUPPORT 93 /* Protocol not supported */ +#define ESOCKTNOSUPPORT 94 /* Socket type not supported */ +#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */ +#define EPFNOSUPPORT 96 /* Protocol family not supported */ +#define EAFNOSUPPORT 97 /* Address family not supported by protocol */ +#define EADDRINUSE 98 /* Address already in use */ +#define EADDRNOTAVAIL 99 /* Cannot assign requested address */ +#define ENETDOWN 100 /* Network is down */ +#define ENETUNREACH 101 /* Network is unreachable */ +#define ENETRESET 102 /* Network dropped connection because of reset */ +#define ECONNABORTED 103 /* Software caused connection abort */ +#define ECONNRESET 104 /* Connection reset by peer */ +#define ENOBUFS 105 /* No buffer space available */ +#define EISCONN 106 /* Transport endpoint is already connected */ +#define ENOTCONN 107 /* Transport endpoint is not connected */ +#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */ +#define ETOOMANYREFS 109 /* Too many references: cannot splice */ +#define ETIMEDOUT 110 /* Connection timed out */ +#define ECONNREFUSED 111 /* Connection refused */ +#define EHOSTDOWN 112 /* Host is down */ +#define EHOSTUNREACH 113 /* No route to host */ +#define EALREADY 114 /* Operation already in progress */ +#define EINPROGRESS 115 /* Operation now in progress */ +#define ESTALE 116 /* Stale NFS file handle */ +#define EUCLEAN 117 /* Structure needs cleaning */ +#define ENOTNAM 118 /* Not a XENIX named type file */ +#define ENAVAIL 119 /* No XENIX semaphores available */ +#define EISNAM 120 /* Is a named type file */ +#define EREMOTEIO 121 /* Remote I/O error */ +#define EDQUOT 122 /* Quota exceeded */ + +#define ENOMEDIUM 123 /* No medium found */ +#define EMEDIUMTYPE 124 /* Wrong medium type */ + +/* Should never be seen by user programs */ +#define ERESTARTSYS 512 +#define ERESTARTNOINTR 513 +#define ERESTARTNOHAND 514 /* restart if no handler.. */ +#define ENOIOCTLCMD 515 /* No ioctl command */ + +#define _LAST_ERRNO 515 + +#endif diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index 605684bee36..6a7e052a055 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -47,7 +47,7 @@ #undef CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ +#define DEFAULT_COMMANDS ( CONFIG_CMD_DFL | \ CFG_CMD_CACHE | \ CFG_CMD_DATE | \ CFG_CMD_ELF | \ @@ -62,6 +62,12 @@ CFG_CMD_REGINFO \ ) +#ifdef NANDFLASH_SIZE +# define CONFIG_COMMANDS (DEFAULT_COMMANDS | CFG_CMD_NAND) +#else +# define CONFIG_COMMANDS (DEFAULT_COMMANDS) +#endif + #define CFG_UNIFY_CACHE #define CONFIG_MCFFEC @@ -148,6 +154,8 @@ #define CFG_MBAR 0xFC000000 +#define CFG_LATCH_ADDR (CFG_CS1_BASE + 0x80000) + /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) @@ -205,6 +213,19 @@ # define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ #endif +#ifdef NANDFLASH_SIZE +# define CFG_MAX_NAND_DEVICE 1 +# define CFG_NAND_BASE (CFG_CS2_BASE << 16) +# define CFG_NAND_SIZE 1 +# define CFG_NAND_BASE_LIST { CFG_NAND_BASE } +# define NAND_MAX_CHIPS 1 +# define NAND_ALLOW_ERASE_ALL 1 +# define CONFIG_JFFS2_NAND 1 +# define CONFIG_JFFS2_DEV "nand0" +# define CONFIG_JFFS2_PART_SIZE (CFG_CS2_MASK & ~1) +# define CONFIG_JFFS2_PART_OFFSET 0x00000000 +#endif + #define CFG_FLASH_BASE 0 #define CFG_FLASH0_BASE (CFG_CS0_BASE << 16) @@ -241,8 +262,8 @@ #define CFG_CS1_CTRL 0x002A3780 #ifdef NANDFLASH_SIZE -#define CFG_CS2_BASE 0x00800000 -#define CFG_CS2_MASK 0x00ff0001 +#define CFG_CS2_BASE 0x2000 +#define CFG_CS2_MASK ((NANDFLASH_SIZE << 20) | 1) #define CFG_CS2_CTRL 0x00001f60 #endif -- cgit v1.3.1 From 3e4c90c6233618fc1806e63fde68df5f3d6a0171 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Fri, 10 Aug 2007 08:42:55 +0200 Subject: ppc4xx: Update lwmon5 POST configuration Signed-off-by: Stefan Roese --- include/configs/lwmon5.h | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) (limited to 'include/configs') diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 5ebe4404d92..52db71e89d7 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -137,10 +137,25 @@ #define CONFIG_DDR_DATA_EYE 1 /* use DDR2 optimization */ #if 0 /* test-only: disable ECC for now */ #define CONFIG_DDR_ECC 1 /* enable ECC */ +#define CFG_POST_ECC_ON CFG_POST_ECC +#else +#define CFG_POST_ECC_ON 0 +#endif /* POST support */ -#define CONFIG_POST (CFG_POST_ECC) -#endif +#define CONFIG_POST (CFG_POST_MEMORY | \ + CFG_POST_ECC_ON | \ + CFG_POST_CPU | \ + CFG_POST_UART | \ + CFG_POST_I2C | \ + CFG_POST_CACHE | \ + CFG_POST_FPU | \ + CFG_POST_ETHER | \ + CFG_POST_SPR) + +#define CFG_POST_CACHE_ADDR 0x10000000 /* free virtual address */ +#define CONFIG_LOGBUFFER +#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */ /*----------------------------------------------------------------------- * I2C @@ -170,6 +185,7 @@ "hostname=lwmon5\0" \ "netdev=eth0\0" \ "unlock=yes\0" \ + "logversion=2\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=${serverip}:${rootpath}\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ @@ -244,6 +260,7 @@ CFG_CMD_EEPROM | \ CFG_CMD_ELF | \ CFG_CMD_FAT | \ + CFG_CMD_LOG | \ CFG_CMD_I2C | \ CFG_CMD_IRQ | \ CFG_CMD_MII | \ -- cgit v1.3.1 From 714bc55b35b6f6a65cc8740a3842a543e88cdef2 Mon Sep 17 00:00:00 2001 From: Niklaus Giger Date: Fri, 27 Jul 2007 11:27:15 +0200 Subject: Add PPC4xx-HCU4 and HCU5 boards: HCU4 config Signed-off-by: Niklaus Giger --- include/configs/hcu4.h | 343 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 343 insertions(+) create mode 100644 include/configs/hcu4.h (limited to 'include/configs') diff --git a/include/configs/hcu4.h b/include/configs/hcu4.h new file mode 100644 index 00000000000..8779db9afe2 --- /dev/null +++ b/include/configs/hcu4.h @@ -0,0 +1,343 @@ +/* + *(C) Copyright 2005-2007 Netstal Maschinen AG + * Niklaus Giger (Niklaus.Giger@netstal.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************ + * hcu4.h - configuration for HCU4 board (similar to hcu5.h) + ***********************************************************************/ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/*----------------------------------------------------------------------- + * High Level Configuration Options + *----------------------------------------------------------------------*/ +#define CONFIG_HCU4 1 /* Board is HCU4 */ +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_405GPr 1 /* HCU4 has a 405GPr */ +#define CONFIG_405GP 1 +#define CONFIG_4xx 1 + +#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ + +/*----------------------------------------------------------------------- + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) +*----------------------------------------------------------------------*/ +#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */ +#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */ + + +#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ +#define CFG_FLASH_BASE 0xfff80000 /* start of FLASH */ +#define CFG_MONITOR_BASE TEXT_BASE + +/* ... with on-chip memory here (4KBytes) */ +#define CFG_OCM_DATA_ADDR 0xF4000000 +#define CFG_OCM_DATA_SIZE 0x00001000 +/* Do not set up locked dcache as init ram. */ +#undef CFG_INIT_DCACHE_CS + +/* Use the On-Chip-Memory (OCM) as a temporary stack for the startup code. */ +#define CFG_TEMP_STACK_OCM 1 + +#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* OCM */ +#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE +#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +/* + * If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1. + * If CFG_405_UART_ERRATA_59, then UART divisor is 31. + * Otherwise, UART divisor is determined by CPU Clock and CFG_BASE_BAUD value. + * The Linux BASE_BAUD define should match this configuration. + * baseBaud = cpuClock/(uartDivisor*16) + * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock, + * set Linux BASE_BAUD to 403200. + */ +#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */ +#undef CONFIG_SERIAL_MULTI /* needed to be able to define + CONFIG_SERIAL_SOFTWARE_FIFO */ +#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */ +#define CFG_BASE_BAUD 691200 + +/* Size (bytes) of interrupt driven serial port buffer. + * Set to 0 to use polling instead of interrupts. + * Setting to 0 will also disable RTS/CTS handshaking. + */ +#undef CONFIG_SERIAL_SOFTWARE_FIFO + +/* Set console baudrate to 9600 */ +#define CONFIG_BAUDRATE 9600 + + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +/*----------------------------------------------------------------------- + * Environment + *----------------------------------------------------------------------*/ + +#undef CFG_ENV_IS_IN_NVRAM +#undef CFG_ENV_IS_IN_FLASH +#define CFG_ENV_IS_IN_EEPROM +#undef CFG_ENV_IS_NOWHERE + +#ifdef CFG_ENV_IS_IN_EEPROM +/* Put the environment after the SDRAM configuration */ +#define PROM_SIZE 2048 +#define CFG_ENV_OFFSET 512 +#define CFG_ENV_SIZE (PROM_SIZE-CFG_ENV_OFFSET) +#endif + +#ifdef CFG_ENV_IS_IN_FLASH +/* Put the environment in Flash */ +#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ +#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#endif + +/*----------------------------------------------------------------------- + * I2C stuff for a ATMEL AT24C16 (2kB holding ENV, we are using the + * the first internal I2C controller of the PPC440EPx + *----------------------------------------------------------------------*/ +#define CFG_SPD_BUS_NUM 0 + +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +/* This is the 7bit address of the device, not including P. */ +#define CFG_I2C_EEPROM_ADDR 0x50 +#define CFG_I2C_EEPROM_ADDR_LEN 1 + +/* The EEPROM can do 16byte ( 1 << 4 ) page writes. */ +#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07 +#define CFG_EEPROM_PAGE_WRITE_BITS 4 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 +#define CFG_EEPROM_PAGE_WRITE_ENABLE +#undef CFG_I2C_MULTI_EEPROMS + + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +/* Setup some board specific values for the default environment variables */ +#define CONFIG_HOSTNAME hcu4 +#define CONFIG_IPADDR 172.25.1.42 +#define CONFIG_ETHADDR 00:60:13:00:00:00 /* Netstal Machines AG MAC */ +#define CONFIG_OVERWRITE_ETHADDR_ONCE +#define CONFIG_SERVERIP 172.25.1.3 + +#define CFG_TFTP_LOADADDR 0x01000000 /* @16 MB */ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "loadaddr=0x01000000\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ + "nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "rootpath=/home/diagnose/eldk/ppc_4xx\0" \ + "bootfile=/tftpboot/hcu4/uImage\0" \ + "load=tftp 100000 hcu4/u-boot.bin\0" \ + "update=protect off FFFa0000 FFFFFFFF;era FFFa0000 FFFFFFFF;" \ + "cp.b 100000 FFFa0000 60000\0" \ + "upd=run load;run update\0" \ + "vx=tftp ${loadaddr} hcu4_vx_rom;" \ + "setenv bootargs emac(0,0)hcu4_vx_rom e=${ipaddr} " \ + " h=${serverip} u=dpu pw=netstal8752 tn=hcu4 f=0x3008;" \ + "bootvx ${loadaddr}\0" \ + "" +#define CONFIG_BOOTCOMMAND "run vx" + +#if 0 +#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ +#else +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_PHY_ADDR 1 /* PHY address */ + +#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ + +#define CONFIG_HAS_ETH0 +#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_BSP | \ + CFG_CMD_CACHE | \ + CFG_CMD_DHCP | \ + CFG_CMD_DIAG | \ + CFG_CMD_EEPROM | \ + CFG_CMD_ELF | \ + CFG_CMD_FLASH | \ + CFG_CMD_I2C | \ + CFG_CMD_IMMAP | \ + CFG_CMD_IRQ | \ + CFG_CMD_MII | \ + CFG_CMD_NET | \ + CFG_CMD_PING | \ + CFG_CMD_REGINFO | \ + CFG_CMD_SDRAM \ + ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + +/* SPD EEPROM (sdram speed config) disabled */ +#define CONFIG_SPD_EEPROM 1 +#define SPD_EEPROM_ADDRESS 0x50 + +/*----------------------------------------------------------------------- + * Miscellaneous configurable options + *----------------------------------------------------------------------*/ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else + #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + +/*----------------------------------------------------------------------- + * External Bus Controller (EBC) Setup + */ + +/* Memory Bank 0 (Flash Bank 0) initialization */ +#define CFG_EBC_PB0AP 0x02005400 +#define CFG_EBC_PB0CR 0xFFF18000 /* BAS=0xFFF,BS=1MB,BU=R/W,BW=8bit */ + +#define CFG_EBC_PB1AP 0x03041200 +#define CFG_EBC_PB1CR 0x7009A000 /* BAS=,BS=MB,BU=R/W,BW=bit */ + +#define CFG_EBC_PB2AP 0x02054500 +#define CFG_EBC_PB2CR 0x78018000 /* BAS=,BS=MB,BU=R/W,BW=bit */ + +#define CFG_EBC_PB3AP 0x01840300 +#define CFG_EBC_PB3CR 0x7c0ba000 /* BAS=,BS=MB,BU=R/W,BW=bit */ + +#define CFG_EBC_PB4AP 0x01800300 +#define CFG_EBC_PB4CR 0x7e0ba000 /* BAS=,BS=MB,BU=R/W,BW=bit */ + +#define CFG_GPIO0_TCR 0x7ffe0000 /* GPIO value */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ + + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +/* Init Memory Controller: + * + * BR0/1 and OR0/1 (FLASH) + */ + +#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */ +#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */ + + +/* Configuration Port location */ +#define CONFIG_PORT_ADDR 0xF0000500 + + + + +/*----------------------------------------------------------------------- + * Cache Configuration + *----------------------------------------------------------------------*/ +#define CFG_DCACHE_SIZE 16384 /* For IBM 405GPr CPUs */ +#define CFG_CACHELINE_SIZE 32 /* ... */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_HUSH_PARSER /* use "hush" command parser */ +#ifdef CFG_HUSH_PARSER + #define CFG_PROMPT_HUSH_PS2 "> " +#endif + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif +#endif /* __CONFIG_H */ -- cgit v1.3.1 From 137fdd9f474ecb853efdace5200576308c67f18d Mon Sep 17 00:00:00 2001 From: Niklaus Giger Date: Fri, 27 Jul 2007 11:28:03 +0200 Subject: Add PPC4xx-HCU4 and HCU5 boards: HCU5 config Signed-off-by: Niklaus Giger --- include/configs/hcu5.h | 392 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 392 insertions(+) create mode 100644 include/configs/hcu5.h (limited to 'include/configs') diff --git a/include/configs/hcu5.h b/include/configs/hcu5.h new file mode 100644 index 00000000000..87f6948df05 --- /dev/null +++ b/include/configs/hcu5.h @@ -0,0 +1,392 @@ +/* + * (C) Copyright 2007 Netstal Maschinen AG + * Niklaus Giger (Niklaus.Giger@netstal.com) + * + * (C) Copyright 2006-2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * (C) Copyright 2006 + * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com + * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************ + * hcu5.h - configuration for HCU5 board (derived from sequoia.h) + ***********************************************************************/ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/*----------------------------------------------------------------------- + * High Level Configuration Options + *----------------------------------------------------------------------*/ +#define CONFIG_HCU5 1 /* Board is HCU5 */ +#define CONFIG_440EPX 1 /* Specific PPC440EPx */ +#define CONFIG_440 1 /* ... PPC440 family */ +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ +#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ + +/*----------------------------------------------------------------------- + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + *----------------------------------------------------------------------*/ +#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */ +#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */ + +#define CFG_BOOT_BASE_ADDR 0xfff00000 +#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ +#define CFG_FLASH_BASE 0xfff80000 /* start of FLASH */ +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_OCM_BASE 0xe0010000 /* ocm */ +#define CFG_PCI_BASE 0xe0000000 /* Internal PCI regs */ +#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */ +#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000 +#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000 +#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000 + +/* Don't change either of these */ +#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */ + +#define CFG_USB2D0_BASE 0xe0000100 +#define CFG_USB_DEVICE 0xe0000000 +#define CFG_USB_HOST 0xe0000400 + +/*----------------------------------------------------------------------- + * Initial RAM & stack pointer + *----------------------------------------------------------------------*/ +/* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */ +#define CFG_INIT_RAM_OCM 1 /* OCM as init ram */ +#define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */ + +#define CFG_INIT_RAM_END (4 << 10) +#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */ +#define CONFIG_BAUDRATE 9600 +#undef CONFIG_SERIAL_MULTI /* needed to be able to define + CONFIG_SERIAL_SOFTWARE_FIFO, but + CONFIG_SERIAL_SOFTWARE_FIFO (16) does not work */ +/* Size (bytes) of interrupt driven serial port buffer. + * Set to 0 to use polling instead of interrupts. + * Setting to 0 will also disable RTS/CTS handshaking. + */ +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#undef CONFIG_UART1_CONSOLE + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +/*----------------------------------------------------------------------- + * Environment + *----------------------------------------------------------------------*/ + +#undef CFG_ENV_IS_IN_NVRAM +#undef CFG_ENV_IS_IN_FLASH +#define CFG_ENV_IS_IN_EEPROM +#undef CFG_ENV_IS_NOWHERE + +#ifdef CFG_ENV_IS_IN_EEPROM +/* Put the environment after the SDRAM and bootstrap configuration */ +#define PROM_SIZE 2048 +#define CFG_BOOSTRAP_OPTION_OFFSET 512 +#define CFG_ENV_OFFSET (CFG_BOOSTRAP_OPTION_OFFSET + 0x10) +#define CFG_ENV_SIZE (PROM_SIZE-CFG_ENV_OFFSET) +#endif + +#ifdef CFG_ENV_IS_IN_FLASH +/* Put the environment in Flash */ +#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ +#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#endif + +/*----------------------------------------------------------------------- + * DDR SDRAM + *----------------------------------------------------------------------*/ +#define CFG_MBYTES_SDRAM (128) /* 128 MB or 256 MB */ +#define CFG_DDR_CACHED_ADDR 0x40000000 /* setup 2nd TLB cached here */ +#undef CONFIG_DDR_DATA_EYE /* Do not use DDR2 optimization */ +#define CONFIG_DDR_ECC 1 /* enable ECC */ + +/*----------------------------------------------------------------------- + * I2C stuff for a ATMEL AT24C16 (2kB holding ENV, we are using the + * the second internal I2C controller of the PPC440EPx + *----------------------------------------------------------------------*/ +#define CFG_SPD_BUS_NUM 1 + +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +/* This is the 7bit address of the device, not including P. */ +#define CFG_I2C_EEPROM_ADDR 0x50 +#define CFG_I2C_EEPROM_ADDR_LEN 1 + +/* The EEPROM can do 16byte ( 1 << 4 ) page writes. */ +#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07 +#define CFG_EEPROM_PAGE_WRITE_BITS 4 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 +#define CFG_EEPROM_PAGE_WRITE_ENABLE +#undef CFG_I2C_MULTI_EEPROMS + + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run nfs\" to mount Linux root filesystem over NFS;"\ + "echo" + +#undef CONFIG_BOOTARGS + +/* Setup some board specific values for the default environment variables */ +#define CONFIG_HOSTNAME hcu5 +#define CONFIG_IPADDR 172.25.1.42 +#define CONFIG_ETHADDR 00:60:13:00:00:00 /* Netstal Machines AG MAC */ +#define CONFIG_OVERWRITE_ETHADDR_ONCE +#define CONFIG_SERVERIP 172.25.1.3 + +#define CFG_TFTP_LOADADDR 0x01000000 /* @16 MB */ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "loadaddr=0x01000000\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ + "nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "bootfile=hcu5/uImage\0" \ + "rootpath=/home/hcu/eldk/ppc_4xxFP\0" \ + "load=tftp 100000 hcu5/u-boot.bin\0" \ + "update=protect off FFFa0000 FFFFFFFF;era FFFa0000 FFFFFFFF;" \ + "cp.b 100000 FFFa0000 60000\0" \ + "upd=run load;run update\0" \ + "vx=tftp ${loadaddr} hcu5/hcu5_vx_rom;" \ + "setenv bootargs emac(0,0)hcu5_vx_rom e=${ipaddr} " \ + " h=${serverip} u=dpu pw=netstal8752 tn=hcu5 f=0x3008;" \ + "bootvx ${loadaddr}\0" \ + "" +#define CONFIG_BOOTCOMMAND "run vx" + +#if 0 +#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ +#else +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CONFIG_M88E1111_PHY 1 +#define CONFIG_IBM_EMAC4_V4 1 +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */ + +#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ + +#define CONFIG_HAS_ETH0 +#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ + +#define CONFIG_NET_MULTI 1 +#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ +#define CONFIG_PHY1_ADDR 1 + +/* USB */ +#define CONFIG_USB_OHCI +#define CONFIG_USB_STORAGE + +/* Comment this out to enable USB 1.1 device */ +#define USB_2_0_DEVICE + +#define CMD_USB CFG_CMD_USB + +/* Partitions */ +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION + +// CFG_CMD_FLASH | + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_BSP | \ + CFG_CMD_DHCP | \ + CFG_CMD_DIAG | \ + CFG_CMD_EEPROM | \ + CFG_CMD_ELF | \ + CFG_CMD_FAT | \ + CFG_CMD_I2C | \ + CFG_CMD_IMMAP | \ + CFG_CMD_IRQ | \ + CFG_CMD_MII | \ + CFG_CMD_NET | \ + CFG_CMD_NFS | \ + CFG_CMD_PCI | \ + CFG_CMD_PING | \ + CFG_CMD_REGINFO | \ + CFG_CMD_SDRAM | \ + CMD_USB) + +#define CONFIG_SUPPORT_VFAT + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + +/*----------------------------------------------------------------------- + * Miscellaneous configurable options + *----------------------------------------------------------------------*/ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + +/*----------------------------------------------------------------------- + * PCI stuff + *----------------------------------------------------------------------*/ +/* General PCI */ +#define CONFIG_PCI /* include pci support */ +#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/ + +/* Board-specific PCI */ +#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ +#define CFG_PCI_TARGET_INIT +#define CFG_PCI_MASTER_INIT + +#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ +#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * External Bus Controller (EBC) Setup + *----------------------------------------------------------------------*/ +#define CFG_FLASH CFG_FLASH_BASE +#define CFG_CS_1 0xC8000000 /* CAN */ +#define CFG_CS_2 0xCC000000 /* CPLD and IMC-Bus Standard */ +#define CFG_CPLD CFG_CS_2 +#define CFG_CS_3 0xCD000000 /* CPLD and IMC-Bus Fast */ + +/*----------------------------------------------------------------------- + * FLASH organization + * Memory Bank 0 (BOOT-FLASH) initialization + */ +#define CFG_BOOTFLASH_CS 0 /* Boot Flash chip connected to CSx */ +#define CFG_EBC_PB0AP 0x02005400 +#define CFG_EBC_PB0CR 0xFFF18000 /* (CFG_FLASH | 0xda000) */ +#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 32 /* max number of sectors on one chip */ + + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +/* Memory Bank 1 CAN-Chips initialization */ +#define CFG_EBC_PB1AP 0x02054500 +#define CFG_EBC_PB1CR 0xC8018000 + +/* Memory Bank 2 CPLD/IMC-Bus standard initialization */ +#define CFG_EBC_PB2AP 0x01840300 +#define CFG_EBC_PB2CR 0xCC0BA000 + +/* Memory Bank 3 IMC-Bus fast mode initialization */ +#define CFG_EBC_PB3AP 0x01800300 +#define CFG_EBC_PB3CR 0xCE0BA000 + +/* Memory Bank 4 (not used) initialization */ +#undef CFG_EBC_PB4AP +#undef CFG_EBC_PB4CR + +/* Memory Bank 5 (not used) initialization */ +#undef CFG_EBC_PB5AP +#undef CFG_EBC_PB5CR + +#define HCU_CPLD_VERSION_REGISTER ( CFG_CPLD + 0x0F00000 ) +#define HCU_HW_VERSION_REGISTER ( CFG_CPLD + 0x1400000 ) + +/*----------------------------------------------------------------------- + * Cache Configuration + *----------------------------------------------------------------------*/ +#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */ +#define CFG_CACHELINE_SIZE 32 /* ... */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_HUSH_PARSER /* use "hush" command parser */ +#ifdef CFG_HUSH_PARSER + #define CFG_PROMPT_HUSH_PS2 "> " +#endif + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif +#endif /* __CONFIG_H */ + -- cgit v1.3.1 From 35d22f957a85a22bb3cd1ad084fa5404620d1c42 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Fri, 10 Aug 2007 10:42:25 +0200 Subject: Coding style cleanup Signed-off-by: Stefan Roese --- MAKEALL | 2 +- Makefile | 8 +- board/netstal/common/nm_bsp.c | 1 - board/netstal/hcu4/config.mk | 1 - board/netstal/hcu4/hcu4.c | 80 ++++++++++--------- board/netstal/hcu5/config.mk | 1 - board/netstal/hcu5/hcu5.c | 177 +++++++++++++++++++++--------------------- board/netstal/hcu5/init.S | 4 +- board/netstal/hcu5/sdram.c | 23 +++--- include/configs/hcu4.h | 4 +- include/configs/hcu5.h | 4 - 11 files changed, 153 insertions(+), 152 deletions(-) (limited to 'include/configs') diff --git a/MAKEALL b/MAKEALL index e7067972ce3..61a4d4570d2 100755 --- a/MAKEALL +++ b/MAKEALL @@ -91,7 +91,7 @@ LIST_4xx=" \ PPChameleonEVB sbc405 sc3 sequoia \ sequoia_nand taishan VOH405 VOM405 \ W7OLMC W7OLMG walnut WUH405 \ - XPEDITE1K yellowstone yosemite yucca \ + XPEDITE1K yellowstone yosemite yucca \ " ######################################################################### diff --git a/Makefile b/Makefile index 04c2c02dc4b..8282c71d154 100644 --- a/Makefile +++ b/Makefile @@ -1040,7 +1040,7 @@ ADCIOP_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd alpr_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx alpr prodrive + @$(MKCONFIG) $(@:_config=) ppc ppc4xx alpr prodrive AP1000_config:unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix @@ -1135,10 +1135,10 @@ G2000_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000 hcu4_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx hcu4 netstal + @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu4 netstal hcu5_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx hcu5 netstal + @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu5 netstal HH405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx hh405 esd @@ -1258,7 +1258,7 @@ rainier_nand_config: unconfig @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk sc3_config:unconfig - @./mkconfig $(@:_config=) ppc ppc4xx sc3 + @$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3 taishan_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc diff --git a/board/netstal/common/nm_bsp.c b/board/netstal/common/nm_bsp.c index ee1b684abd7..1e06780c0eb 100644 --- a/board/netstal/common/nm_bsp.c +++ b/board/netstal/common/nm_bsp.c @@ -39,4 +39,3 @@ U_BOOT_CMD( "Help for Netstal Maschinen BSP specific command.\n" ); #endif - diff --git a/board/netstal/hcu4/config.mk b/board/netstal/hcu4/config.mk index f5a4ce474d1..376609ab0d6 100644 --- a/board/netstal/hcu4/config.mk +++ b/board/netstal/hcu4/config.mk @@ -26,4 +26,3 @@ TEXT_BASE = 0xFFFa0000 ifeq ($(debug),1) PLATFORM_CPPFLAGS += -DDEBUG -g endif - diff --git a/board/netstal/hcu4/hcu4.c b/board/netstal/hcu4/hcu4.c index deb7d2da934..252aaa76b2a 100644 --- a/board/netstal/hcu4/hcu4.c +++ b/board/netstal/hcu4/hcu4.c @@ -27,10 +27,30 @@ DECLARE_GLOBAL_DATA_PTR; +#define HCU_MACH_VERSIONS_REGISTER (0x7C000000 + 0xF00000) + +#define mtsdram(reg, data) { mtdcr(memcfga,reg);mtdcr(memcfgd,data); } +#define mfsdram(value, reg) { mtdcr(memcfga,reg); value = mfdcr(memcfgd); } + +#define SDRAM_LEN 32*1024*1024 /* 32 MB -RAM */ + +#define DO_UGLY_SDRAM_WORKAROUND + +enum { + /* HW_GENERATION_HCU wird nicht mehr unterstuetzt */ + HW_GENERATION_HCU2 = 0x10, + HW_GENERATION_HCU3 = 0x10, + HW_GENERATION_HCU4 = 0x20, + HW_GENERATION_MCU = 0x08, + HW_GENERATION_MCU20 = 0x0a, + HW_GENERATION_MCU25 = 0x09, +}; + void sysLedSet(u32 value); -long int spd_sdram(int(read_spd)(uint addr)) +long int spd_sdram(int(read_spd)(uint addr)); + #ifdef CONFIG_SPD_EEPROM - #define DEBUG +#define DEBUG #endif #if defined(DEBUG) @@ -86,26 +106,15 @@ int board_pre_init (void) { return board_early_init_f (); } - #endif -enum { - /* HW_GENERATION_HCU wird nicht mehr unterstuetzt */ - HW_GENERATION_HCU2 = 0x10, - HW_GENERATION_HCU3 = 0x10, - HW_GENERATION_HCU4 = 0x20, - HW_GENERATION_MCU = 0x08, - HW_GENERATION_MCU20 = 0x0a, - HW_GENERATION_MCU25 = 0x09, -}; - int checkboard (void) { -#define HCU_MACH_VERSIONS_REGISTER ( 0x7C000000 + 0xF00000 ) - unsigned j; - uint16_t *boardVersReg = (uint16_t *) HCU_MACH_VERSIONS_REGISTER; - uint16_t generation = *boardVersReg & 0xf0; - uint16_t index = *boardVersReg & 0x0f; + unsigned int j; + u16 *boardVersReg = (u16 *) HCU_MACH_VERSIONS_REGISTER; + u16 generation = *boardVersReg & 0xf0; + u16 index = *boardVersReg & 0x0f; + /* Force /RTS to active. The board it not wired quite correctly to use cts/rtc flow control, so just force the /RST active and forget about it. */ @@ -117,24 +126,26 @@ int checkboard (void) printf ("HCU4: index %d\n\n", index); /* GPIO here noch nicht richtig initialisert !!! */ sysLedSet(0); - for (j=0; j < 7;j++) { + for (j = 0; j < 7; j++) { sysLedSet(1 << j); - udelay(50*1000); + udelay(50 * 1000); } + return 0; } u32 sysLedGet(void) { - return( ~( (*(u32 *)GPIO0_OR)) >> 23) & 0xff; + return (~((*(u32 *)GPIO0_OR)) >> 23) & 0xff; } void sysLedSet(u32 value /* value to place in LEDs */) { u32 tmp = ~value; u32 *ledReg; - tmp = (tmp << 23) | 0x7FFFFF; - ledReg = (u32 *)GPIO0_OR; + + tmp = (tmp << 23) | 0x7FFFFF; + ledReg = (u32 *)GPIO0_OR; *ledReg = tmp; } @@ -147,13 +158,11 @@ void sdram_init(void) return; } -#define mtsdram(reg, data) { mtdcr(memcfga,reg);mtdcr(memcfgd,data); } -#define mfsdram(value, reg) { mtdcr(memcfga,reg); value = mfdcr(memcfgd); } - #if defined(DEBUG) void show_sdram_registers(void) { u32 value; + printf ("SDRAM Controller Registers --\n"); mfsdram(value, mem_mcopt1); printf (" SDRAM0_CFG : 0x%08x\n", value); @@ -170,8 +179,6 @@ void show_sdram_registers(void) } #endif -#define SDRAM_LEN 32*1024*1024 /* 32 MB -RAM */ - /* * this is even after checkboard. It returns the size of the SDRAM * that we have installed. This function is called by board_init_f @@ -244,9 +251,10 @@ long int fixed_hcu4_sdram (int board_type) static u32 getSerialNr(void) { u32 *serial = (u32 *)CFG_FLASH_BASE; - if (*serial == 0xffffffff) { + + if (*serial == 0xffffffff) return get_ticks(); - } + return *serial; } @@ -260,12 +268,14 @@ int misc_init_r(void) char *s = getenv("ethaddr"); char *e; int i; - u32 serial = getSerialNr(); + u32 serial = getSerialNr(); + for (i = 0; i < 6; ++i) { gd->bd->bi_enetaddr[i] = s ? simple_strtoul (s, &e, 16) : 0; if (s) s = (*e) ? e + 1 : e; } + if (gd->bd->bi_enetaddr[3] == 0 && gd->bd->bi_enetaddr[4] == 0 && gd->bd->bi_enetaddr[5] == 0) { @@ -288,13 +298,14 @@ int misc_init_r(void) return 0; } -#define DO_UGLY_SDRAM_WORKAROUND #ifdef DO_UGLY_SDRAM_WORKAROUND - #include "i2c.h" +#include "i2c.h" + void set_spd_default_value(unsigned int spd_addr,uchar def_val) { uchar value; int res = i2c_read(SPD_EEPROM_ADDRESS, spd_addr, 1, &value, 1) ; + if (res == 0 && value == 0xff) { res = i2c_write(SPD_EEPROM_ADDRESS, spd_addr, 1, &def_val, 1) ; @@ -387,7 +398,6 @@ long int initdram(int board_type) bcu4_testdram(dram_size); printf("%s %d MB of SDRAM\n", __FUNCTION__, dram_size/(1024*1024)); #endif + return dram_size; } - - diff --git a/board/netstal/hcu5/config.mk b/board/netstal/hcu5/config.mk index 58ec2af31e5..cfd574412c1 100644 --- a/board/netstal/hcu5/config.mk +++ b/board/netstal/hcu5/config.mk @@ -28,4 +28,3 @@ PLATFORM_CPPFLAGS += -DCONFIG_440=1 ifeq ($(debug),1) PLATFORM_CPPFLAGS += -DDEBUG -g endif - diff --git a/board/netstal/hcu5/hcu5.c b/board/netstal/hcu5/hcu5.c index 59107b920a3..23df0814ff5 100644 --- a/board/netstal/hcu5/hcu5.c +++ b/board/netstal/hcu5/hcu5.c @@ -29,12 +29,34 @@ void sysLedSet(u32 value); extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; -#define mtcpr0(reg, data) do { mtdcr(CPR0_CFGADDR,reg); \ - mtdcr(CPR0_CFGDATA,data); } while (0) -#define mfcpr0(reg, data) do { mtdcr(CPR0_CFGADDR,reg); \ - data = mfdcr(CPR0_CFGDATA); } while (0) +#undef BOOTSTRAP_OPTION_A_ACTIVE + +#define SDR0_CP440 0x0180 + +#define SYSTEM_RESET 0x30000000 +#define CHIP_RESET 0x20000000 + +#define SDR0_ECID0 0x0080 +#define SDR0_ECID1 0x0081 +#define SDR0_ECID2 0x0082 +#define SDR0_ECID3 0x0083 + +#define SYS_IO_ADDRESS 0xcce00000 + +#define DEFAULT_ETH_ADDR "ethaddr" +/* ethaddr for first or etha1ddr for second ethernet */ + +enum { + /* HW_GENERATION_HCU1 is no longer supported */ + HW_GENERATION_HCU2 = 0x10, + HW_GENERATION_HCU3 = 0x10, + HW_GENERATION_HCU4 = 0x20, + HW_GENERATION_HCU5 = 0x30, + HW_GENERATION_MCU = 0x08, + HW_GENERATION_MCU20 = 0x0a, + HW_GENERATION_MCU25 = 0x09, +}; -#define SDR0_CP440 0x0180 /* * This function is run very early, out of flash, and before devices are @@ -50,7 +72,6 @@ int board_early_init_f(void) { u32 reg; -#undef BOOTSTRAP_OPTION_A_ACTIVE #ifdef BOOTSTRAP_OPTION_A_ACTIVE /* Booting with Bootstrap Option A * First boot, with CPR0_ICFG_RLI_MASK == 0 @@ -64,27 +85,26 @@ int board_early_init_f(void) u32 cpr0icfg; u32 dbcr; - mfcpr0(CPR0_ICFG, cpr0icfg); - if ( ! (cpr0icfg & CPR0_ICFG_RLI_MASK ) ) { - mtcpr0(CPR0_MALD, 0x02000000); - mtcpr0(CPR0_OPBD, 0x02000000); - mtcpr0(CPR0_PERD, 0x05000000); /* 1:5 */ - mtcpr0(CPR0_PLLC, 0x40000238); - mtcpr0(CPR0_PLLD, 0x01010414); - mtcpr0(CPR0_PRIMAD, 0x01000000); - mtcpr0(CPR0_PRIMBD, 0x01000000); - mtcpr0(CPR0_SPCID, 0x03000000); - mtsdr(SDR0_PFC0, 0x00003E00); /* [CTE] = 0 */ - mtsdr(SDR0_CP440, 0x0EAAEA02); /* [Nto1] = 1*/ - mtcpr0(CPR0_ICFG, cpr0icfg | CPR0_ICFG_RLI_MASK); + + mfcpr(CPR0_ICFG, cpr0icfg); + if (!(cpr0icfg & CPR0_ICFG_RLI_MASK)) { + mtcpr(CPR0_MALD, 0x02000000); + mtcpr(CPR0_OPBD, 0x02000000); + mtcpr(CPR0_PERD, 0x05000000); /* 1:5 */ + mtcpr(CPR0_PLLC, 0x40000238); + mtcpr(CPR0_PLLD, 0x01010414); + mtcpr(CPR0_PRIMAD, 0x01000000); + mtcpr(CPR0_PRIMBD, 0x01000000); + mtcpr(CPR0_SPCID, 0x03000000); + mtsdr(SDR0_PFC0, 0x00003E00); /* [CTE] = 0 */ + mtsdr(SDR0_CP440, 0x0EAAEA02); /* [Nto1] = 1*/ + mtcpr(CPR0_ICFG, cpr0icfg | CPR0_ICFG_RLI_MASK); /* * Initiate system reset in debug control register DBCR */ dbcr = mfspr(dbcr0); - #define SYSTEM_RESET 0x30000000 - #define CHIP_RESET 0x20000000 - mtspr(dbcr0, dbcr | CHIP_RESET ); + mtspr(dbcr0, dbcr | CHIP_RESET); } mtsdr(SDR0_CP440, 0x0EAAEA02); /* [Nto1] = 1*/ #endif @@ -162,60 +182,42 @@ int board_early_init_f(void) return 0; } -#ifdef CONFIG_BOARD_PRE_INIT -int board_pre_init (void) +int board_pre_init(void) { - return board_early_init_f (); + return board_early_init_f(); } -#endif - -enum { - /* HW_GENERATION_HCU1 is no longer supported */ - HW_GENERATION_HCU2 = 0x10, - HW_GENERATION_HCU3 = 0x10, - HW_GENERATION_HCU4 = 0x20, - HW_GENERATION_HCU5 = 0x30, - HW_GENERATION_MCU = 0x08, - HW_GENERATION_MCU20 = 0x0a, - HW_GENERATION_MCU25 = 0x09, -}; - -int checkboard (void) +int checkboard(void) { -#define SDR0_ECID0 0x0080 -#define SDR0_ECID1 0x0081 -#define SDR0_ECID2 0x0082 -#define SDR0_ECID3 0x0083 - unsigned j; - uint16_t *hwVersReg = (uint16_t *) HCU_HW_VERSION_REGISTER; - uint16_t *boardVersReg = (uint16_t *) HCU_CPLD_VERSION_REGISTER; - uint16_t generation = *boardVersReg & 0xf0; - uint16_t index = *boardVersReg & 0x0f; - ulong ecid0, ecid1, ecid2, ecid3; - printf ("Netstal Maschinen AG: "); + unsigned int j; + u16 *hwVersReg = (u16 *) HCU_HW_VERSION_REGISTER; + u16 *boardVersReg = (u16 *) HCU_CPLD_VERSION_REGISTER; + u16 generation = *boardVersReg & 0xf0; + u16 index = *boardVersReg & 0x0f; + u32 ecid0, ecid1, ecid2, ecid3; + + printf("Netstal Maschinen AG: "); if (generation == HW_GENERATION_HCU3) - printf ("HCU3: index %d", index); + printf("HCU3: index %d", index); else if (generation == HW_GENERATION_HCU4) - printf ("HCU4: index %d", index); + printf("HCU4: index %d", index); else if (generation == HW_GENERATION_HCU5) - printf ("HCU5: index %d", index); - printf (" HW 0x%02x\n", *hwVersReg & 0xff); + printf("HCU5: index %d", index); + printf(" HW 0x%02x\n", *hwVersReg & 0xff); mfsdr(SDR0_ECID0, ecid0); mfsdr(SDR0_ECID1, ecid1); mfsdr(SDR0_ECID2, ecid2); mfsdr(SDR0_ECID3, ecid3); - printf("Chip ID 0x%x 0x%x 0x%x 0x%x\n", ecid0, ecid1, ecid2, ecid3); - for (j=0; j < 6;j++) { + printf("Chip ID 0x%x 0x%x 0x%x 0x%x\n", ecid0, ecid1, ecid2, ecid3); + for (j = 0;j < 6; j++) { sysLedSet(1 << j); - udelay(200*1000); + udelay(200 * 1000); } + return 0; } -#define SYS_IO_ADDRESS 0xcce00000 - u32 sysLedGet(void) { return in16(SYS_IO_ADDRESS) & 0x3f; @@ -232,9 +234,10 @@ void sysLedSet(u32 value /* value to place in LEDs */) static u32 getSerialNr(void) { u32 *serial = (u32 *)CFG_FLASH_BASE; - if (*serial == 0xffffffff) { + + if (*serial == 0xffffffff) return get_ticks(); - } + return *serial; } @@ -242,45 +245,44 @@ static u32 getSerialNr(void) /*---------------------------------------------------------------------------+ * misc_init_r. *---------------------------------------------------------------------------*/ - -#define DEFAULT_ETH_ADDR "ethaddr" -/* ethaddr for first or etha1ddr for second ethernet */ - int misc_init_r(void) { char *s = getenv(DEFAULT_ETH_ADDR); char *e; int i; - u32 serial = getSerialNr(); + u32 serial = getSerialNr(); unsigned long usb2d0cr = 0; unsigned long usb2phy0cr, usb2h0cr = 0; unsigned long sdr0_pfc1; for (i = 0; i < 6; ++i) { - gd->bd->bi_enetaddr[i] = s ? simple_strtoul (s, &e, 16) : 0; + gd->bd->bi_enetaddr[i] = s ? simple_strtoul(s, &e, 16) : 0; if (s) s = (*e) ? e + 1 : e; } + if (gd->bd->bi_enetaddr[3] == 0 && gd->bd->bi_enetaddr[4] == 0 && gd->bd->bi_enetaddr[5] == 0) { char ethaddr[22]; + /* Must be in sync with CONFIG_ETHADDR */ gd->bd->bi_enetaddr[0] = 0x00; gd->bd->bi_enetaddr[1] = 0x60; gd->bd->bi_enetaddr[2] = 0x13; - gd->bd->bi_enetaddr[3] = (serial >> 16) & 0xff; - gd->bd->bi_enetaddr[4] = (serial >> 8) & 0xff; + gd->bd->bi_enetaddr[3] = (serial >> 16) & 0xff; + gd->bd->bi_enetaddr[4] = (serial >> 8) & 0xff; /* byte[5].bit 0 must be zero */ - gd->bd->bi_enetaddr[5] = (serial >> 0) & 0xfe; - sprintf (ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X\0", - gd->bd->bi_enetaddr[0], gd->bd->bi_enetaddr[1], - gd->bd->bi_enetaddr[2], gd->bd->bi_enetaddr[3], - gd->bd->bi_enetaddr[4], gd->bd->bi_enetaddr[5]) ; + gd->bd->bi_enetaddr[5] = (serial >> 0) & 0xfe; + sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X\0", + gd->bd->bi_enetaddr[0], gd->bd->bi_enetaddr[1], + gd->bd->bi_enetaddr[2], gd->bd->bi_enetaddr[3], + gd->bd->bi_enetaddr[4], gd->bd->bi_enetaddr[5]) ; printf("%s: Setting eth %s serial 0x%x\n", __FUNCTION__, ethaddr, serial); - setenv (DEFAULT_ETH_ADDR, ethaddr); + setenv(DEFAULT_ETH_ADDR, ethaddr); } + #ifdef CFG_ENV_IS_IN_FLASH /* Monitor protection ON by default */ (void)flash_protect(FLAG_PROTECT_SET, @@ -334,9 +336,9 @@ int misc_init_r(void) mtsdr(SDR0_USB2H0CR, usb2h0cr); /*clear resets*/ - udelay (1000); + udelay(1000); mtsdr(SDR0_SRST1, 0x00000000); - udelay (1000); + udelay(1000); mtsdr(SDR0_SRST0, 0x00000000); printf("USB: Host(int phy) Device(ext phy)\n"); @@ -356,7 +358,7 @@ int misc_init_r(void) * certain pre-initialization actions. * ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) +#if defined(CONFIG_PCI) int pci_pre_init(struct pci_controller *hose) { unsigned long addr; @@ -374,7 +376,7 @@ int pci_pre_init(struct pci_controller *hose) mfsdr(sdr_amp1, addr); mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00); addr = mfdcr(plb3_acr); - // mtdcr(plb3_acr, addr & ~plb1_acr_wrp_mask); /* ngngng */ + /* mtdcr(plb3_acr, addr & ~plb1_acr_wrp_mask); */ /* ngngng */ mtdcr(plb3_acr, addr | 0x80000000); /* Sequoia */ /*-------------------------------------------------------------------+ @@ -383,7 +385,7 @@ int pci_pre_init(struct pci_controller *hose) mfsdr(sdr_amp0, addr); mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00); addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */ -// mtdcr(plb4_acr, addr & ~plb1_acr_wrp_mask); /* ngngng */ + /* mtdcr(plb4_acr, addr & ~plb1_acr_wrp_mask); */ /* ngngng */ mtdcr(plb4_acr, addr); /* Sequoia */ /*-------------------------------------------------------------------+ @@ -393,24 +395,23 @@ int pci_pre_init(struct pci_controller *hose) addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair; addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled; addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep; -// addr = (addr & ~plb0_acr_wrp_mask) ; /* ngngng */ + /* addr = (addr & ~plb0_acr_wrp_mask); */ /* ngngng */ addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep; /* Sequoia */ - // mtdcr(plb0_acr, addr); /* Sequoia */ - mtdcr(plb0_acr, 0); // PATCH HAB: WRITE PIPELINING OFF - + /* mtdcr(plb0_acr, addr); */ /* Sequoia */ + mtdcr(plb0_acr, 0); /* PATCH HAB: WRITE PIPELINING OFF */ /* Segment1 */ addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair; addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled; addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep; addr = (addr & ~plb1_acr_wrp_mask) ; - // mtdcr(plb1_acr, addr); /* Sequoia */ - mtdcr(plb1_acr, 0); // PATCH HAB: WRITE PIPELINING OFF + /* mtdcr(plb1_acr, addr); */ /* Sequoia */ + mtdcr(plb1_acr, 0); /* PATCH HAB: WRITE PIPELINING OFF */ return 1; } -#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */ +#endif /* defined(CONFIG_PCI) */ /************************************************************************* * pci_target_init @@ -476,7 +477,6 @@ void pci_target_init(struct pci_controller *hose) pci_write_config_word(0, PCI_ERREN, 0); pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); - } #endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */ @@ -523,4 +523,3 @@ int is_pci_host(struct pci_controller *hose) return 1; } #endif /* defined(CONFIG_PCI) */ - diff --git a/board/netstal/hcu5/init.S b/board/netstal/hcu5/init.S index 6da5f22ce38..5ab6cd24d76 100644 --- a/board/netstal/hcu5/init.S +++ b/board/netstal/hcu5/init.S @@ -55,7 +55,7 @@ tlbtab: tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I ) /* TLB-entry for EBC (CFG_CPLD) */ - // tlbentry( CFG_CPLD, SZ_1K, CFG_CPLD, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) + /* tlbentry( CFG_CPLD, SZ_1K, CFG_CPLD, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) */ /* CAN */ tlbentry( CFG_CS_1, SZ_16M, CFG_CS_1, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) /* IMC + CPLD */ @@ -77,5 +77,3 @@ tlbtab: /* TLB for SDRAM will be added by initdram (sdram.c) */ tlbtab_end - - diff --git a/board/netstal/hcu5/sdram.c b/board/netstal/hcu5/sdram.c index f7d6865a309..40391958d21 100644 --- a/board/netstal/hcu5/sdram.c +++ b/board/netstal/hcu5/sdram.c @@ -216,8 +216,9 @@ long int initdram (int board_type) { #define HCU_HW_SDRAM_CONFIG_MASK 0x7 #define INVALID_HW_CONFIG "Invalid HW-Config" - uint16_t *hwVersReg = (uint16_t *) HCU_HW_VERSION_REGISTER; - unsigned int dram_size=0; + u16 *hwVersReg = (u16 *) HCU_HW_VERSION_REGISTER; + unsigned int dram_size = 0; + mtsdram(DDR0_02, 0x00000000); /* Values must be kept in sync with Excel-table <> ! */ @@ -229,15 +230,15 @@ long int initdram (int board_type) switch (*hwVersReg & HCU_HW_SDRAM_CONFIG_MASK) { case 0: dram_size = 128 * 1024 * 1024 ; - mtsdram(DDR0_06, 0x0102C80D); // 128MB RAM - mtsdram(DDR0_11, 0x000FC800); // 128MB RAM - mtsdram(DDR0_43, 0x030A0300); // 128MB RAM + mtsdram(DDR0_06, 0x0102C80D); /* 128MB RAM */ + mtsdram(DDR0_11, 0x000FC800); /* 128MB RAM */ + mtsdram(DDR0_43, 0x030A0300); /* 128MB RAM */ break; case 1: dram_size = 256 * 1024 * 1024 ; - mtsdram(DDR0_06, 0x0102C812); // 256MB RAM - mtsdram(DDR0_11, 0x0014C800); // 256MB RAM - mtsdram(DDR0_43, 0x030A0200); // 256MB RAM + mtsdram(DDR0_06, 0x0102C812); /* 256MB RAM */ + mtsdram(DDR0_11, 0x0014C800); /* 256MB RAM */ + mtsdram(DDR0_43, 0x030A0200); /* 256MB RAM */ break; default: sdram_panic(INVALID_HW_CONFIG); @@ -245,8 +246,10 @@ long int initdram (int board_type) } dram_size -= 16 * 1024 * 1024; mtsdram(DDR0_07, 0x00090100); - // TCPD=200 cycles of clock input is required to lock the DLL. - // CKE must be HIGH the entire time.mtsdram(DDR0_08, 0x02C80001); + /* + * TCPD=200 cycles of clock input is required to lock the DLL. + * CKE must be HIGH the entire time.mtsdram(DDR0_08, 0x02C80001); + */ mtsdram(DDR0_08, 0x02C80001); mtsdram(DDR0_09, 0x00011D5F); mtsdram(DDR0_10, 0x00000100); diff --git a/include/configs/hcu4.h b/include/configs/hcu4.h index 8779db9afe2..9e45e903d2d 100644 --- a/include/configs/hcu4.h +++ b/include/configs/hcu4.h @@ -312,8 +312,6 @@ #define CONFIG_PORT_ADDR 0xF0000500 - - /*----------------------------------------------------------------------- * Cache Configuration *----------------------------------------------------------------------*/ @@ -333,7 +331,7 @@ #define CFG_HUSH_PARSER /* use "hush" command parser */ #ifdef CFG_HUSH_PARSER - #define CFG_PROMPT_HUSH_PS2 "> " +#define CFG_PROMPT_HUSH_PS2 "> " #endif #if (CONFIG_COMMANDS & CFG_CMD_KGDB) diff --git a/include/configs/hcu5.h b/include/configs/hcu5.h index 87f6948df05..fa6ca37534f 100644 --- a/include/configs/hcu5.h +++ b/include/configs/hcu5.h @@ -236,8 +236,6 @@ #define CONFIG_DOS_PARTITION #define CONFIG_ISO_PARTITION -// CFG_CMD_FLASH | - #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ CFG_CMD_ASKENV | \ CFG_CMD_BSP | \ @@ -301,7 +299,6 @@ #define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/ /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT #define CFG_PCI_MASTER_INIT @@ -389,4 +386,3 @@ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif #endif /* __CONFIG_H */ - -- cgit v1.3.1 From c646bba6465a45c60746d4cc1602cd06c1960f2d Mon Sep 17 00:00:00 2001 From: Joe Hamman Date: Thu, 9 Aug 2007 15:11:03 -0500 Subject: Add support for SBC8641D. Config files. Add support for Wind River's SBC8641D reference board. Signed-off by: Joe Hamman Acked-by: Wolfgang Denk Acked-by: Jon Loeliger --- MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 2 + doc/README.sbc8641d | 28 +++ include/configs/sbc8641d.h | 599 +++++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 634 insertions(+) create mode 100644 doc/README.sbc8641d create mode 100644 include/configs/sbc8641d.h (limited to 'include/configs') diff --git a/MAINTAINERS b/MAINTAINERS index 693b1157290..703f2fe48e5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -179,6 +179,10 @@ Howard Gray MVS1 MPC823 +Joe Hamman + + sbc8641d MPC8641D + Klaus Heydeck KUP4K MPC855 diff --git a/MAKEALL b/MAKEALL index 3e186ccd5a3..22b12061eba 100755 --- a/MAKEALL +++ b/MAKEALL @@ -165,6 +165,7 @@ LIST_85xx=" \ LIST_86xx=" \ MPC8641HPCN \ + SBC8641D \ " ######################################################################### diff --git a/Makefile b/Makefile index 2a18a4d6aba..4b607365fbc 100644 --- a/Makefile +++ b/Makefile @@ -1866,6 +1866,8 @@ TQM8560_config: unconfig MPC8641HPCN_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8641hpcn +sbc8641d_config: unconfig + @./mkconfig $(@:_config=) ppc mpc86xx sbc8641d ######################################################################### ## 74xx/7xx Systems diff --git a/doc/README.sbc8641d b/doc/README.sbc8641d new file mode 100644 index 00000000000..a051466a11b --- /dev/null +++ b/doc/README.sbc8641d @@ -0,0 +1,28 @@ +Wind River SBC8641D reference board +=========================== + +Created 06/14/2007 Joe Hamman +Copyright 2007, Embedded Specialties, Inc. +Copyright 2007 Wind River Systemes, Inc. +----------------------------- + +1. Building U-Boot +------------------ +The SBC8641D code is known to build using ELDK 4.1. + + $ make sbc8641d_config + Configuring for sbc8641d board... + + $ make + + +2. Switch and Jumper Settings +----------------------------- +All Jumpers & Switches are in their default positions. Please refer to +the board documentation for details. Some settings control CPU voltages +and settings may change with board revisions. + +3. Known limitations +-------------------- +PCI: + The PCI command may hang if no boards are present in either slot. diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h new file mode 100644 index 00000000000..dba19441c78 --- /dev/null +++ b/include/configs/sbc8641d.h @@ -0,0 +1,599 @@ +/* + * Copyright 2007 Wind River Systems + * Copyright 2007 Embedded Specialties, Inc. + * Joe Hamman + * + * Copyright 2006 Freescale Semiconductor. + * + * Srikanth Srinivasan (srikanth.srinivasan@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * SBC8641D board configuration file + * + * Make sure you change the MAC address and other network params first, + * search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* High Level Configuration Options */ +#define CONFIG_MPC86xx 1 /* MPC86xx */ +#define CONFIG_MPC8641 1 /* MPC8641 specific */ +#define CONFIG_SBC8641D 1 /* SBC8641D board specific */ +#define CONFIG_NUM_CPUS 2 /* Number of CPUs in the system */ +#define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */ + +#ifdef RUN_DIAG +#define CFG_DIAG_ADDR 0xff800000 +#endif + +#define CFG_RESET_ADDRESS 0xfff00100 + +#undef CONFIG_PCI +#define CONFIG_FSL_PCI_INIT 1 + +#define CONFIG_TSEC_ENET /* tsec ethernet support */ +#define CONFIG_ENV_OVERWRITE + +#undef CONFIG_SPD_EEPROM /* Do not use SPD EEPROM for DDR setup*/ +#undef CONFIG_DDR_DLL /* possible DLL fix needed */ +#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */ +#undef CONFIG_DDR_ECC /* only for ECC DDR module */ +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ +#define CONFIG_MEM_INIT_VALUE 0xDeadBeef +#define CONFIG_NUM_DDR_CONTROLLERS 2 +#define CACHE_LINE_INTERLEAVING 0x20000000 +#define PAGE_INTERLEAVING 0x21000000 +#define BANK_INTERLEAVING 0x22000000 +#define SUPER_BANK_INTERLEAVING 0x23000000 + + +#define CONFIG_ALTIVEC 1 + +/* + * L2CR setup -- make sure this is right for your board! + */ +#define CFG_L2 +#define L2_INIT 0 +#define L2_ENABLE (L2CR_L2E) + +#ifndef CONFIG_SYS_CLK_FREQ +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) +#endif + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ + +#undef CFG_DRAM_TEST /* memory test, takes time */ +#define CFG_MEMTEST_START 0x00200000 /* memtest region */ +#define CFG_MEMTEST_END 0x00400000 + +/* + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + */ +#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ +#define CFG_CCSRBAR 0xf8000000 /* relocated CCSRBAR */ +#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */ + +/* + * DDR Setup + */ +#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */ +#define CFG_DDR_SDRAM_BASE2 0x10000000 /* DDR bank 2 */ +#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE +#define CFG_SDRAM_BASE2 CFG_DDR_SDRAM_BASE2 +#define CONFIG_VERY_BIG_RAM + +#define MPC86xx_DDR_SDRAM_CLK_CNTL + +#if defined(CONFIG_SPD_EEPROM) + /* + * Determine DDR configuration from I2C interface. + */ + #define SPD_EEPROM_ADDRESS1 0x51 /* DDR DIMM */ + #define SPD_EEPROM_ADDRESS2 0x52 /* DDR DIMM */ + #define SPD_EEPROM_ADDRESS3 0x53 /* DDR DIMM */ + #define SPD_EEPROM_ADDRESS4 0x54 /* DDR DIMM */ + +#else + /* + * Manually set up DDR1 & DDR2 parameters + */ + + #define CFG_SDRAM_SIZE 512 /* DDR is 512MB */ + + #define CFG_DDR_CS0_BNDS 0x0000000F + #define CFG_DDR_CS1_BNDS 0x00000000 + #define CFG_DDR_CS2_BNDS 0x00000000 + #define CFG_DDR_CS3_BNDS 0x00000000 + #define CFG_DDR_CS0_CONFIG 0x80010102 + #define CFG_DDR_CS1_CONFIG 0x00000000 + #define CFG_DDR_CS2_CONFIG 0x00000000 + #define CFG_DDR_CS3_CONFIG 0x00000000 + #define CFG_DDR_EXT_REFRESH 0x00000000 + #define CFG_DDR_TIMING_0 0x00220802 + #define CFG_DDR_TIMING_1 0x38377322 + #define CFG_DDR_TIMING_2 0x002040c7 + #define CFG_DDR_CFG_1A 0x43008008 + #define CFG_DDR_CFG_2 0x24401000 + #define CFG_DDR_MODE_1 0x23c00542 + #define CFG_DDR_MODE_2 0x00000000 + #define CFG_DDR_MODE_CTL 0x00000000 + #define CFG_DDR_INTERVAL 0x05080100 + #define CFG_DDR_DATA_INIT 0x00000000 + #define CFG_DDR_CLK_CTRL 0x03800000 + #define CFG_DDR_CFG_1B 0xC3008008 + + #define CFG_DDR2_CS0_BNDS 0x0010001F + #define CFG_DDR2_CS1_BNDS 0x00000000 + #define CFG_DDR2_CS2_BNDS 0x00000000 + #define CFG_DDR2_CS3_BNDS 0x00000000 + #define CFG_DDR2_CS0_CONFIG 0x80010102 + #define CFG_DDR2_CS1_CONFIG 0x00000000 + #define CFG_DDR2_CS2_CONFIG 0x00000000 + #define CFG_DDR2_CS3_CONFIG 0x00000000 + #define CFG_DDR2_EXT_REFRESH 0x00000000 + #define CFG_DDR2_TIMING_0 0x00220802 + #define CFG_DDR2_TIMING_1 0x38377322 + #define CFG_DDR2_TIMING_2 0x002040c7 + #define CFG_DDR2_CFG_1A 0x43008008 + #define CFG_DDR2_CFG_2 0x24401000 + #define CFG_DDR2_MODE_1 0x23c00542 + #define CFG_DDR2_MODE_2 0x00000000 + #define CFG_DDR2_MODE_CTL 0x00000000 + #define CFG_DDR2_INTERVAL 0x05080100 + #define CFG_DDR2_DATA_INIT 0x00000000 + #define CFG_DDR2_CLK_CTRL 0x03800000 + #define CFG_DDR2_CFG_1B 0xC3008008 + + +#endif + +/* #define CFG_ID_EEPROM 1 +#define ID_EEPROM_ADDR 0x57 */ + +/* + * The SBC8641D contains 16MB flash space at ff000000. + */ +#define CFG_FLASH_BASE 0xff000000 /* start of FLASH 16M */ + +/* Flash */ +#define CFG_BR0_PRELIM 0xff001001 /* port size 16bit */ +#define CFG_OR0_PRELIM 0xff006e65 /* 16MB Boot Flash area */ + +/* 64KB EEPROM */ +#define CFG_BR1_PRELIM 0xf0000801 /* port size 16bit */ +#define CFG_OR1_PRELIM 0xffff6e65 /* 64K EEPROM area */ + +/* EPLD - User switches, board id, LEDs */ +#define CFG_BR2_PRELIM 0xf1000801 /* port size 16bit */ +#define CFG_OR2_PRELIM 0xfff06e65 /* EPLD (switches, board ID, LEDs) area */ + +/* Local bus SDRAM 128MB */ +#define CFG_BR3_PRELIM 0xe0001861 /* port size ?bit */ +#define CFG_OR3_PRELIM 0xfc006cc0 /* 128MB local bus SDRAM area (1st half) */ +#define CFG_BR4_PRELIM 0xe4001861 /* port size ?bit */ +#define CFG_OR4_PRELIM 0xfc006cc0 /* 128MB local bus SDRAM area (2nd half) */ + +/* Disk on Chip (DOC) 128MB */ +#define CFG_BR5_PRELIM 0xe8001001 /* port size ?bit */ +#define CFG_OR5_PRELIM 0xf8006e65 /* 128MB local bus SDRAM area (2nd half) */ + +/* LCD */ +#define CFG_BR6_PRELIM 0xf4000801 /* port size ?bit */ +#define CFG_OR6_PRELIM 0xfff06e65 /* 128MB local bus SDRAM area (2nd half) */ + +/* Control logic & misc peripherals */ +#define CFG_BR7_PRELIM 0xf2000801 /* port size ?bit */ +#define CFG_OR7_PRELIM 0xfff06e65 /* 128MB local bus SDRAM area (2nd half) */ + +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ +#define CFG_MAX_FLASH_SECT 131 /* sectors per device */ + +#undef CFG_FLASH_CHECKSUM +#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ + +#define CFG_FLASH_CFI_DRIVER +#define CFG_FLASH_CFI +#define CFG_WRITE_SWAPPED_DATA +#define CFG_FLASH_EMPTY_INFO +#define CFG_FLASH_PROTECTION + +#undef CONFIG_CLOCKS_IN_MHZ + +#define CONFIG_L1_INIT_RAM +#define CFG_INIT_RAM_LOCK 1 +#ifndef CFG_INIT_RAM_LOCK +#define CFG_INIT_RAM_ADDR 0x0fd00000 /* Initial RAM address */ +#else +#define CFG_INIT_RAM_ADDR 0xf8400000 /* Initial RAM address */ +#endif +#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */ + +#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ + +/* Serial Port */ +#define CONFIG_CONS_INDEX 1 +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_CLK get_bus_freq(0) + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} + +#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500) +#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600) + +/* Use the HUSH parser */ +#define CFG_HUSH_PARSER +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +/* + * Pass open firmware flat tree to kernel + */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 + +/* maximum size of the flat tree (8K) */ +#define OF_FLAT_TREE_MAX_SIZE 8192 + +#define OF_CPU "PowerPC,8641@0" +#define OF_SOC "soc@f8000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc@f8000000/serial@4500" + +#define CFG_64BIT_VSPRINTF 1 +#define CFG_64BIT_STRTOUL 1 + +/* + * I2C + */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3100 + +/* + * RapidIO MMU + */ +#define CFG_RIO_MEM_BASE 0xc0000000 /* base address */ +#define CFG_RIO_MEM_PHYS CFG_RIO_MEM_BASE +#define CFG_RIO_MEM_SIZE 0x20000000 /* 128M */ + +/* + * General PCI + * Addresses are mapped 1-1. + */ +#define CFG_PCI1_MEM_BASE 0x80000000 +#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE +#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ +#define CFG_PCI1_IO_BASE 0xe2000000 +#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE +#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */ + +/* PCI view of System Memory */ +#define CFG_PCI_MEMORY_BUS 0x00000000 +#define CFG_PCI_MEMORY_PHYS 0x00000000 +#define CFG_PCI_MEMORY_SIZE 0x80000000 + +#define CFG_PCI2_MEM_BASE 0xa0000000 +#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE +#define CFG_PCI2_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI2_IO_BASE 0xe3000000 +#define CFG_PCI2_IO_PHYS CFG_PCI2_IO_BASE +#define CFG_PCI2_IO_SIZE 0x1000000 /* 16M */ + +#if defined(CONFIG_PCI) + +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ + +#undef CFG_SCSI_SCAN_BUS_REVERSE + +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + +#undef CONFIG_EEPRO100 +#undef CONFIG_TULIP + +#if !defined(CONFIG_PCI_PNP) + #define PCI_ENET0_IOADDR 0xe0000000 + #define PCI_ENET0_MEMADDR 0xe0000000 + #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */ +#endif + +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ + +#define CONFIG_DOS_PARTITION +#undef CONFIG_SCSI_AHCI + +#ifdef CONFIG_SCSI_AHCI +#define CONFIG_SATA_ULI5288 +#define CFG_SCSI_MAX_SCSI_ID 4 +#define CFG_SCSI_MAX_LUN 1 +#define CFG_SCSI_MAX_DEVICE (CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN) +#define CFG_SCSI_MAXDEVICE CFG_SCSI_MAX_DEVICE +#endif + +#endif /* CONFIG_PCI */ + +#if defined(CONFIG_TSEC_ENET) + +#ifndef CONFIG_NET_MULTI +#define CONFIG_NET_MULTI 1 +#endif + +/* #define CONFIG_MII 1 */ /* MII PHY management */ + +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "eTSEC1" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "eTSEC2" +#define CONFIG_TSEC3 1 +#define CONFIG_TSEC3_NAME "eTSEC3" +#define CONFIG_TSEC4 1 +#define CONFIG_TSEC4_NAME "eTSEC4" + +#define TSEC1_PHY_ADDR 0x1F +#define TSEC2_PHY_ADDR 0x00 +#define TSEC3_PHY_ADDR 0x01 +#define TSEC4_PHY_ADDR 0x02 +#define TSEC1_PHYIDX 0 +#define TSEC2_PHYIDX 0 +#define TSEC3_PHYIDX 0 +#define TSEC4_PHYIDX 0 + +#define CFG_TBIPA_VALUE 0x1e /* Set TBI address not to conflict with TSEC1_PHY_ADDR */ + +#define CONFIG_ETHPRIME "eTSEC1" + +#endif /* CONFIG_TSEC_ENET */ + +/* + * BAT0 2G Cacheable, non-guarded + * 0x0000_0000 2G DDR + */ +#define CFG_DBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE) +#define CFG_DBAT0U (BATU_BL_2G | BATU_VS | BATU_VP) +#define CFG_IBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE ) +#define CFG_IBAT0U CFG_DBAT0U + +/* + * BAT1 1G Cache-inhibited, guarded + * 0x8000_0000 512M PCI-Express 1 Memory + * 0xa000_0000 512M PCI-Express 2 Memory + * Changed it for operating from 0xd0000000 + */ +#define CFG_DBAT1L ( CFG_PCI1_MEM_BASE | BATL_PP_RW \ + | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT1U CFG_DBAT1U + +/* + * BAT2 512M Cache-inhibited, guarded + * 0xc000_0000 512M RapidIO Memory + */ +#define CFG_DBAT2L (CFG_RIO_MEM_BASE | BATL_PP_RW \ + | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT2U (CFG_RIO_MEM_BASE | BATU_BL_512M | BATU_VS | BATU_VP) +#define CFG_IBAT2L (CFG_RIO_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT2U CFG_DBAT2U + +/* + * BAT3 4M Cache-inhibited, guarded + * 0xf800_0000 4M CCSR + */ +#define CFG_DBAT3L ( CFG_CCSRBAR | BATL_PP_RW \ + | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT3U (CFG_CCSRBAR | BATU_BL_4M | BATU_VS | BATU_VP) +#define CFG_IBAT3L (CFG_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT3U CFG_DBAT3U + +/* + * BAT4 32M Cache-inhibited, guarded + * 0xe200_0000 16M PCI-Express 1 I/O + * 0xe300_0000 16M PCI-Express 2 I/0 + * Note that this is at 0xe0000000 + */ +#define CFG_DBAT4L ( CFG_PCI1_IO_BASE | BATL_PP_RW \ + | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT4U (CFG_PCI1_IO_BASE | BATU_BL_32M | BATU_VS | BATU_VP) +#define CFG_IBAT4L (CFG_PCI1_IO_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT4U CFG_DBAT4U + +/* + * BAT5 128K Cacheable, non-guarded + * 0xe401_0000 128K Init RAM for stack in the CPU DCache (no backing memory) + */ +#define CFG_DBAT5L (CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE) +#define CFG_DBAT5U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) +#define CFG_IBAT5L CFG_DBAT5L +#define CFG_IBAT5U CFG_DBAT5U + +/* + * BAT6 32M Cache-inhibited, guarded + * 0xfe00_0000 32M FLASH + */ +#define CFG_DBAT6L ((CFG_FLASH_BASE & 0xfe000000) | BATL_PP_RW \ + | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT6U ((CFG_FLASH_BASE & 0xfe000000) | BATU_BL_32M | BATU_VS | BATU_VP) +#define CFG_IBAT6L ((CFG_FLASH_BASE & 0xfe000000) | BATL_PP_RW | BATL_MEMCOHERENCE) +#define CFG_IBAT6U CFG_DBAT6U + +#define CFG_DBAT7L 0x00000000 +#define CFG_DBAT7U 0x00000000 +#define CFG_IBAT7L 0x00000000 +#define CFG_IBAT7U 0x00000000 + +/* + * Environment + */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) +#define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ +#define CFG_ENV_SIZE 0x2000 + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#include + #define CONFIG_CMD_PING + #define CONFIG_CMD_I2C + +#if defined(CONFIG_PCI) + #define CONFIG_CMD_PCI +#endif + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LOAD_ADDR 0x2000000 /* default load address */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else + #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ + +/* Cache Configuration */ +#define CFG_DCACHE_SIZE 32768 +#define CFG_CACHELINE_SIZE 32 +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ + +/* The mac addresses for all ethernet interface */ +#if defined(CONFIG_TSEC_ENET) +#define CONFIG_ETHADDR 02:E0:0C:00:00:01 +#define CONFIG_ETH1ADDR 02:E0:0C:00:01:FD +#define CONFIG_ETH2ADDR 02:E0:0C:00:02:FD +#define CONFIG_ETH3ADDR 02:E0:0C:00:03:FD +#endif + +#define CONFIG_HAS_ETH1 1 +#define CONFIG_HAS_ETH2 1 +#define CONFIG_HAS_ETH3 1 + +#define CONFIG_IPADDR 192.168.0.50 + +#define CONFIG_HOSTNAME sbc8641d +#define CONFIG_ROOTPATH /opt/eldk/ppc_74xx +#define CONFIG_BOOTFILE uImage + +#define CONFIG_SERVERIP 192.168.0.2 +#define CONFIG_GATEWAYIP 192.168.0.1 +#define CONFIG_NETMASK 255.255.255.0 + +/* default location for tftp and bootm */ +#define CONFIG_LOADADDR 1000000 + +#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ +#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=uRamdisk\0" \ + "dtbaddr=400000\0" \ + "dtbfile=sbc8641d.dtb\0" \ + "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \ + "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \ + "maxcpus=1" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $dtbaddr $dtbfile;" \ + "bootm $loadaddr - $dtbaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $dtbaddr $dtbfile;" \ + "bootm $loadaddr $ramdiskaddr $dtbaddr" + +#define CONFIG_FLASHBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "bootm ffd00000 ffb00000 ffa00000" + +#define CONFIG_BOOTCOMMAND CONFIG_FLASHBOOTCOMMAND + +#endif /* __CONFIG_H */ -- cgit v1.3.1 From cca34967cbd13ff6bd352be29e3f1cc88ab24c05 Mon Sep 17 00:00:00 2001 From: Joe Hamman Date: Sat, 11 Aug 2007 06:54:58 -0500 Subject: Modify SBC8641D to use new Freescale PCI routines PCI-Express sockets 1 and 2 verified working with Intel Pro/1000 PT adapter. Signed-off-by: Joe Hamman Signde-off-by: Jon Loeliger --- board/sbc8641d/sbc8641d.c | 156 ++++++++++++++++++++++++++++++++++----------- include/configs/sbc8641d.h | 9 ++- 2 files changed, 125 insertions(+), 40 deletions(-) (limited to 'include/configs') diff --git a/board/sbc8641d/sbc8641d.c b/board/sbc8641d/sbc8641d.c index e5dd5509c1f..7adc42faec1 100644 --- a/board/sbc8641d/sbc8641d.c +++ b/board/sbc8641d/sbc8641d.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #if defined(CONFIG_OF_FLAT_TREE) @@ -60,36 +61,6 @@ int checkboard (void) { puts ("Board: Wind River SBC8641D\n"); -#ifdef CONFIG_PCI - - volatile immap_t *immap = (immap_t *) CFG_CCSRBAR; - volatile ccsr_gur_t *gur = &immap->im_gur; - volatile ccsr_pex_t *pex1 = &immap->im_pex1; - - uint devdisr = gur->devdisr; - uint io_sel = (gur->pordevsr & MPC86xx_PORDEVSR_IO_SEL) >> 16; - uint host1_agent = (gur->porbmsr & MPC86xx_PORBMSR_HA) >> 17; - uint pex1_agent = (host1_agent == 0) || (host1_agent == 1); - - if ((io_sel == 2 || io_sel == 3 || io_sel == 5 - || io_sel == 6 || io_sel == 7 || io_sel == 0xF) - && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) { - debug ("PCI-EXPRESS 1: %s \n", pex1_agent ? "Agent" : "Host"); - debug ("0x%08x=0x%08x ", &pex1->pme_msg_det, pex1->pme_msg_det); - if (pex1->pme_msg_det) { - pex1->pme_msg_det = 0xffffffff; - debug (" with errors. Clearing. Now 0x%08x", - pex1->pme_msg_det); - } - debug ("\n"); - } else { - puts ("PCI-EXPRESS 1: Disabled in hardware\n"); - } - -#else - puts ("PCI-EXPRESS1: Disabled in configuration\n"); -#endif - return 0; } @@ -244,21 +215,130 @@ static struct pci_config_table pci_fsl86xxads_config_table[] = { }; #endif -static struct pci_controller hose = { +static struct pci_controller pci1_hose = { #ifndef CONFIG_PCI_PNP - config_table:pci_mpc86xxcts_config_table, + config_table:pci_mpc86xxcts_config_table #endif }; +#endif /* CONFIG_PCI */ -#endif /* CONFIG_PCI */ +#ifdef CONFIG_PCI2 +static struct pci_controller pci2_hose; +#endif /* CONFIG_PCI2 */ -void pci_init_board (void) +int first_free_busno = 0; + +void pci_init_board(void) { -#ifdef CONFIG_PCI - extern void pci_mpc86xx_init (struct pci_controller *hose); + volatile immap_t *immap = (immap_t *) CFG_CCSRBAR; + volatile ccsr_gur_t *gur = &immap->im_gur; + uint devdisr = gur->devdisr; + uint io_sel = (gur->pordevsr & MPC86xx_PORDEVSR_IO_SEL) >> 16; + +#ifdef CONFIG_PCI1 +{ + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR; + extern void fsl_pci_init(struct pci_controller *hose); + struct pci_controller *hose = &pci1_hose; +#ifdef DEBUG + uint host1_agent = (gur->porbmsr & MPC86xx_PORBMSR_HA) >> 17; + uint pex1_agent = (host1_agent == 0) || (host1_agent == 1); +#endif + if ((io_sel == 2 || io_sel == 3 || io_sel == 5 + || io_sel == 6 || io_sel == 7 || io_sel == 0xF) + && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) { + debug("PCI-EXPRESS 1: %s \n", pex1_agent ? "Agent" : "Host"); + debug("0x%08x=0x%08x ", &pci->pme_msg_det, pci->pme_msg_det); + if (pci->pme_msg_det) { + pci->pme_msg_det = 0xffffffff; + debug(" with errors. Clearing. Now 0x%08x", + pci->pme_msg_det); + } + debug("\n"); + + /* inbound */ + pci_set_region(hose->regions + 0, + CFG_PCI_MEMORY_BUS, + CFG_PCI_MEMORY_PHYS, + CFG_PCI_MEMORY_SIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + /* outbound memory */ + pci_set_region(hose->regions + 1, + CFG_PCI1_MEM_BASE, + CFG_PCI1_MEM_PHYS, + CFG_PCI1_MEM_SIZE, + PCI_REGION_MEM); + + /* outbound io */ + pci_set_region(hose->regions + 2, + CFG_PCI1_IO_BASE, + CFG_PCI1_IO_PHYS, + CFG_PCI1_IO_SIZE, + PCI_REGION_IO); + + hose->region_count = 3; + + hose->first_busno=first_free_busno; + pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); + + fsl_pci_init(hose); + + first_free_busno=hose->last_busno+1; + printf (" PCI-EXPRESS 1 on bus %02x - %02x\n", + hose->first_busno,hose->last_busno); + + } else { + puts("PCI-EXPRESS 1: Disabled\n"); + } +} +#else + puts("PCI-EXPRESS1: Disabled\n"); +#endif /* CONFIG_PCI1 */ + +#ifdef CONFIG_PCI2 +{ + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI2_ADDR; + extern void fsl_pci_init(struct pci_controller *hose); + struct pci_controller *hose = &pci2_hose; + + + /* inbound */ + pci_set_region(hose->regions + 0, + CFG_PCI_MEMORY_BUS, + CFG_PCI_MEMORY_PHYS, + CFG_PCI_MEMORY_SIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + /* outbound memory */ + pci_set_region(hose->regions + 1, + CFG_PCI2_MEM_BASE, + CFG_PCI2_MEM_PHYS, + CFG_PCI2_MEM_SIZE, + PCI_REGION_MEM); + + /* outbound io */ + pci_set_region(hose->regions + 2, + CFG_PCI2_IO_BASE, + CFG_PCI2_IO_PHYS, + CFG_PCI2_IO_SIZE, + PCI_REGION_IO); + + hose->region_count = 3; + + hose->first_busno=first_free_busno; + pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); + + fsl_pci_init(hose); + + first_free_busno=hose->last_busno+1; + printf (" PCI-EXPRESS 2 on bus %02x - %02x\n", + hose->first_busno,hose->last_busno); +} +#else + puts("PCI-EXPRESS 2: Disabled\n"); +#endif /* CONFIG_PCI2 */ - pci_mpc86xx_init (&hose); -#endif /* CONFIG_PCI */ } #if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index dba19441c78..68d31ca1dbc 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -49,8 +49,10 @@ #define CFG_RESET_ADDRESS 0xfff00100 -#undef CONFIG_PCI -#define CONFIG_FSL_PCI_INIT 1 +#define CONFIG_PCI 1 /* Enable PCIE */ +#define CONFIG_PCI1 1 /* PCIE controler 1 (slot 1) */ +#define CONFIG_PCI2 1 /* PCIE controler 2 (slot 2) */ +#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE @@ -95,6 +97,9 @@ #define CFG_CCSRBAR 0xf8000000 /* relocated CCSRBAR */ #define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */ +#define CFG_PCI1_ADDR (CFG_CCSRBAR+0x8000) +#define CFG_PCI2_ADDR (CFG_CCSRBAR+0x9000) + /* * DDR Setup */ -- cgit v1.3.1 From be5d72d10d47609326226225181e301fb9a33b58 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Mon, 13 Aug 2007 21:57:53 +0200 Subject: Minor coding style cleanup. Update CHANGELOG. Signed-off-by: Wolfgang Denk --- CHANGELOG | 74 +++++++++++++++++++++++++++++++++++++++++++++ board/cm5200/cm5200.c | 6 ++-- board/cm5200/cm5200.h | 2 +- board/cm5200/cmd_cm5200.c | 2 +- doc/README.generic_usb_ohci | 5 +-- drivers/nand/nand_util.c | 10 +++--- drivers/usb_ohci.c | 11 ------- include/configs/cm5200.h | 21 +------------ libfdt/fdt_ro.c | 1 - 9 files changed, 86 insertions(+), 46 deletions(-) (limited to 'include/configs') diff --git a/CHANGELOG b/CHANGELOG index 1228908a5ad..57299b65f2d 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,53 @@ +commit a08458303e7f9db67f296980036d3292c35cb45c +Author: Haavard Skinnemoen +Date: Fri Jun 29 18:38:51 2007 +0200 + + atmel_mci: Fix data timeout value + + Calculate the data timeout based on values from the CSD instead of + just using a hardcoded DTOR value. This is a backport of a similar fix + in BSP 2.0, with one additional fix: the DTOCYC value is rounded up + instead of down. + + Signed-off-by: Haavard Skinnemoen + +commit 0ba8eed28b575626b17e0a7882f923b83e0d7584 +Author: Haavard Skinnemoen +Date: Mon Aug 13 17:22:31 2007 +0200 + + AVR32: Include instead of + + include/asm-avr32/div64.h was recently moved to include/div64.h, but + cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of + the patch was merged perhaps?) + + This patch updates cpu/at32ap/interrupts.c so that the avr32 port + compiles again. + + Signed-off-by: Haavard Skinnemoen + +commit f0d1246ed7cb5a88522244c596d7ae7e6f161283 +Author: Haavard Skinnemoen +Date: Wed Jun 27 13:34:26 2007 +0200 + + atmel_mci: Use 512 byte blocksize if possible + + Instead of always using the largest blocksize the card supports, check + if it can support smaller block sizes and use 512 bytes if possible. + Most cards do support this, and other parts of u-boot seem to have + trouble with block sizes different from 512 bytes. + + Also enable underrun/overrun protection. + + Signed-off-by: Haavard Skinnemoen + Acked-by: Hans-Christian Egtvedt + +commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b +Author: Wolfgang Denk +Date: Sun Aug 12 21:34:50 2007 +0200 + + Update CHANGELOG + commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a Author: Wolfgang Denk Date: Sun Aug 12 21:34:34 2007 +0200 @@ -3928,6 +3978,30 @@ Date: Fri Jan 5 09:15:34 2007 +0100 Signed-off-by Dan Malek, +commit f2134f8e9eb006bdcd729e89f309c07b2fa45180 +Author: Haavard Skinnemoen +Date: Wed May 2 13:31:53 2007 +0200 + + macb: Don't restart autonegotiation if we already have link + + Rework macb_phy_init so that it doesn't attempt to re-negotiate if the + link is already up. + + Signed-off-by: Haavard Skinnemoen + +commit 04fcb5d38bc90779cd9a710d60702075986f0e29 +Author: Haavard Skinnemoen +Date: Wed May 2 13:22:38 2007 +0200 + + macb: Introduce a few barriers when dealing with DMA descriptors + + There were a few theoretical possibilities that the compiler might + optimize away DMA descriptor reads and/or writes and thus cause + synchronization problems with the hardware. Insert barriers where + we depend on reads/writes actually hitting memory. + + Signed-off-by: Haavard Skinnemoen + commit ffa621a0d12a1ccd81c936c567f8917a213787a8 Author: Andy Fleming Date: Sat Feb 24 01:08:13 2007 -0600 diff --git a/board/cm5200/cm5200.c b/board/cm5200/cm5200.c index 6804e33c27e..b74ac08bce3 100644 --- a/board/cm5200/cm5200.c +++ b/board/cm5200/cm5200.c @@ -122,7 +122,7 @@ long int initdram(int board_type) mem_conf_t *mem_conf; mem_conf = get_mem_config(board_type); - + /* configure SDRAM start/end for detection */ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */ @@ -303,7 +303,7 @@ int checkboard(void) hw_id_t hw_id_tmp; char module_name_tmp[MODULE_NAME_MAXLEN] = ""; - /* + /* * We need I2C to access HW ID data from EEPROM, so we call i2c_init() * here despite the fact that it will be called again later on. We * also use a little trick to silence I2C-related output. @@ -321,7 +321,7 @@ int checkboard(void) else printf("Board: unrecognized cm5200 module (%s)\n", module_name_tmp); - + return 0; } diff --git a/board/cm5200/cm5200.h b/board/cm5200/cm5200.h index a6cbc88f47c..b2ea5ce0d8a 100644 --- a/board/cm5200/cm5200.h +++ b/board/cm5200/cm5200.h @@ -138,7 +138,7 @@ static char **hw_id_list[] = { cmu1_qa_hw_id, }; -/* indices to the above list - keep in sync */ +/* indices to the above list - keep in sync */ enum { CM1_QA, CM11_QA, diff --git a/board/cm5200/cmd_cm5200.c b/board/cm5200/cmd_cm5200.c index fd9b914ae3d..513c3655372 100644 --- a/board/cm5200/cmd_cm5200.c +++ b/board/cm5200/cmd_cm5200.c @@ -1,7 +1,7 @@ /* * (C) Copyright 2007 Markus Kappeler * - * Adapted for U-Boot 1.2 by Piotr Kruszynski + * Adapted for U-Boot 1.2 by Piotr Kruszynski * * See file CREDITS for list of people who contributed to this * project. diff --git a/doc/README.generic_usb_ohci b/doc/README.generic_usb_ohci index c343dfdf90a..494dd1f5d92 100644 --- a/doc/README.generic_usb_ohci +++ b/doc/README.generic_usb_ohci @@ -41,7 +41,7 @@ mpc5xxx. For these the config option CFG_OHCI_BE_CONTROLLER -needs to be defined. +needs to be defined. PCI Controllers @@ -55,6 +55,3 @@ PCI Controllers need to do byte swapping on register accesses, so they should to define: CFG_OHCI_SWAP_REG_ACCESS - - - diff --git a/drivers/nand/nand_util.c b/drivers/nand/nand_util.c index aee87270390..cf05043c0af 100644 --- a/drivers/nand/nand_util.c +++ b/drivers/nand/nand_util.c @@ -209,7 +209,7 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts) } if (!opts->quiet) { - unsigned long long n =(unsigned long long) + unsigned long long n =(unsigned long long) (erase.addr+meminfo->erasesize-opts->offset) * 100; int percent = (int)do_div(n, erase_length); @@ -476,8 +476,8 @@ int nand_write_opts(nand_info_t *meminfo, const nand_write_options_t *opts) imglen -= readlen; if (!opts->quiet) { - unsigned long long n = (unsigned long long) - (opts->length-imglen) * 100; + unsigned long long n = (unsigned long long) + (opts->length-imglen) * 100; int percent = (int)do_div(n, opts->length); /* output progress message only at whole percent * steps to reduce the number of messages printed @@ -651,8 +651,8 @@ int nand_read_opts(nand_info_t *meminfo, const nand_read_options_t *opts) } if (!opts->quiet) { - unsigned long long n = (unsigned long long) - (opts->length-imglen) * 100; + unsigned long long n = (unsigned long long) + (opts->length-imglen) * 100; int percent = (int)do_div(n ,opts->length); /* output progress message only at whole percent * steps to reduce the number of messages printed diff --git a/drivers/usb_ohci.c b/drivers/usb_ohci.c index d6b745fadd6..f0a37b20a71 100644 --- a/drivers/usb_ohci.c +++ b/drivers/usb_ohci.c @@ -132,8 +132,6 @@ int got_rhsc; /* device which was disconnected */ struct usb_device *devgone; - - /*-------------------------------------------------------------------------*/ /* AMD-756 (D2 rev) reports corrupt register contents in some cases. @@ -157,7 +155,6 @@ static inline u32 roothub_status (struct ohci *hc) static u32 roothub_portstatus (struct ohci *hc, int i) { return read_roothub (hc, portstatus [i], 0xffe0fce0); } - /* forward declaration */ static int hc_interrupt (void); static void @@ -412,8 +409,6 @@ static void ohci_dump (ohci_t *controller, int verbose) ep_print_int_eds (controller, "hcca"); dbg ("hcca frame #%04x", controller->hcca->frame_no); ohci_dump_roothub (controller, 1); -} - #endif /* DEBUG */ @@ -701,7 +696,6 @@ static void periodic_unlink ( struct ohci *ohci, volatile struct ed *ed, } } - /* unlink an ed from one of the HC chains. * just the link to the ed is unlinked. * the link from the ed still points to another operational ed or 0 @@ -759,7 +753,6 @@ static int ep_unlink (ohci_t *ohci, ed_t *edi) return 0; } - /*-------------------------------------------------------------------------*/ /* add/reinit an endpoint; this should be done once at the @@ -939,7 +932,6 @@ static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buf * Done List handling functions *-------------------------------------------------------------------------*/ - /* calculate the transfer length and update the urb */ static void dl_transfer_length(td_t * td) @@ -951,7 +943,6 @@ static void dl_transfer_length(td_t * td) tdBE = m32_swap (td->hwBE); tdCBP = m32_swap (td->hwCBP); - if (!(usb_pipetype (lurb_priv->pipe) == PIPE_CONTROL && ((td->index == 0) || (td->index == lurb_priv->length - 1)))) { if (tdBE != 0) { @@ -1094,7 +1085,6 @@ static __u8 root_hub_dev_des[] = 0x01 /* __u8 bNumConfigurations; */ }; - /* Configuration descriptor */ static __u8 root_hub_config_des[] = { @@ -1172,7 +1162,6 @@ static unsigned char root_hub_str_index1[] = /* Hub class-specific descriptor is constructed dynamically */ - /*-------------------------------------------------------------------------*/ #define OK(x) len = (x); break diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h index 56c0ecb4d97..d554348021f 100644 --- a/include/configs/cm5200.h +++ b/include/configs/cm5200.h @@ -31,7 +31,6 @@ #define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ #define CONFIG_CM5200 1 /* ... on CM5200 platform */ - /* * Supported commands */ @@ -60,7 +59,6 @@ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } #define CONFIG_SILENT_CONSOLE 1 /* needed to silence i2c_init() */ - /* * Ethernet configuration */ @@ -71,7 +69,6 @@ #define CONFIG_MISC_INIT_R 1 #define CONFIG_MAC_OFFSET 0x35 /* MAC address offset in I2C EEPROM */ - /* * POST support */ @@ -80,11 +77,9 @@ /* List of I2C addresses to be verified by POST */ #define I2C_ADDR_LIST { CFG_I2C_SLAVE, CFG_I2C_IO, CFG_I2C_EEPROM } - /* display image timestamps */ #define CONFIG_TIMESTAMP 1 - /* * Autobooting */ @@ -137,19 +132,16 @@ "" #define CONFIG_BOOTCOMMAND "run flash_flash" - /* * Low level configuration */ - /* * Clock configuration */ #define CFG_MPC5XXX_CLKIN 33000000 /* SYS_XTAL_IN = 33MHz */ #define CFG_IPBCLK_EQUALS_XLBCLK 1 /* IPB = 133MHz */ - /* * Memory map */ @@ -184,7 +176,7 @@ */ #define CFG_FLASH_CFI 1 #define CFG_FLASH_CFI_DRIVER 1 -#define CFG_FLASH_BASE 0xfc000000 +#define CFG_FLASH_BASE 0xfc000000 /* we need these despite using CFI */ #define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */ #define CFG_MAX_FLASH_SECT 256 /* max num of sectors on one chip */ @@ -215,7 +207,6 @@ #define CFG_CS_BURST 0x00000000 #define CFG_CS_DEADCYCLE 0x00000001 - /* * SDRAM configuration * settings for k4s561632E-xx75, assuming XLB = 132 MHz @@ -225,8 +216,6 @@ #define SDRAM_CONFIG1 0xE2333900 #define SDRAM_CONFIG2 0x8EE70000 - - /* * MTD configuration */ @@ -238,7 +227,6 @@ "2m(kernel),27904k(rootfs)," \ "-(config)" - /* * I2C configuration */ @@ -249,13 +237,11 @@ #define CFG_I2C_IO 0x38 /* PCA9554AD I2C I/O port address */ #define CFG_I2C_EEPROM 0x53 /* I2C EEPROM device address */ - /* * RTC configuration */ #define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */ - /* * USB configuration */ @@ -284,7 +270,6 @@ #define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) - /* * Pin multiplexing configuration */ @@ -302,7 +287,6 @@ */ #define CFG_GPS_PORT_CONFIG 0x10559C44 - /* * Miscellaneous configurable options */ @@ -322,7 +306,6 @@ #define CFG_LOAD_ADDR 0x100000 /* default load address */ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Various low-level settings */ @@ -334,7 +317,6 @@ #define CFG_XLB_PIPELINING 1 /* enable transaction pipeling */ - /* * Cache Configuration */ @@ -343,7 +325,6 @@ #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif - /* * Flat Device Tree support */ diff --git a/libfdt/fdt_ro.c b/libfdt/fdt_ro.c index ffd9209b193..46d525db145 100644 --- a/libfdt/fdt_ro.c +++ b/libfdt/fdt_ro.c @@ -534,4 +534,3 @@ int fdt_get_reservemap(void *fdt, int n, struct fdt_reserve_entry *re) } #endif /* CONFIG_OF_LIBFDT */ - -- cgit v1.3.1 From 837f1ba05cfb248aba5ab8e1fb1bfeefa07d5962 Mon Sep 17 00:00:00 2001 From: Ed Swarthout Date: Fri, 27 Jul 2007 01:50:51 -0500 Subject: 8544ds PCIE support PCI1 LAW mapping should use CFG_PCI1_MEM_PHY and not _BASE address. Enable LBC and ECM errors and clear error registers. Add tftpflash env var to get uboot from tftp server and flash it. Add pci/pcie convenience env vars to display register space: "run pcie3regs" to see all pcie3 ccsr registers "run pcie3cfg" to see all cfg registers Whitespace cleanup and MPC8544DS.h Enable CONFIG_INTERRUPTS. Signed-off-by: Ed Swarthout Acked-by: Andy Fleming --- board/freescale/mpc8544ds/init.S | 6 +- board/freescale/mpc8544ds/mpc8544ds.c | 350 ++++++++++++++++++++++++++++++++++ include/asm-ppc/immap_85xx.h | 37 +++- include/configs/MPC8544DS.h | 135 +++++++------ 4 files changed, 468 insertions(+), 60 deletions(-) (limited to 'include/configs') diff --git a/board/freescale/mpc8544ds/init.S b/board/freescale/mpc8544ds/init.S index 296fee5e606..ea7d54dc302 100644 --- a/board/freescale/mpc8544ds/init.S +++ b/board/freescale/mpc8544ds/init.S @@ -52,8 +52,8 @@ */ #define entry_start \ - mflr r1 ; \ - bl 0f ; + mflr r1 ; \ + bl 0f ; #define entry_end \ 0: mflr r0 ; \ @@ -214,7 +214,7 @@ law_entry: .long 0 .long (LAWAR_TRGT_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN - .long (CFG_PCI1_MEM_BASE>>12) & 0xfffff + .long (CFG_PCI1_MEM_PHYS>>12) & 0xfffff .long LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M) .long (CFG_PCI1_IO_PHYS>>12) & 0xfffff diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c index 4ff1da93017..8ddbb010119 100644 --- a/board/freescale/mpc8544ds/mpc8544ds.c +++ b/board/freescale/mpc8544ds/mpc8544ds.c @@ -22,8 +22,10 @@ #include #include +#include #include #include +#include #include #include @@ -51,12 +53,19 @@ int checkboard (void) { volatile immap_t *immap = (immap_t *) CFG_CCSRBAR; volatile ccsr_gur_t *gur = &immap->im_gur; + volatile ccsr_lbc_t *lbc = &immap->im_lbc; + volatile ccsr_local_ecm_t *ecm = &immap->im_local_ecm; if ((uint)&gur->porpllsr != 0xe00e0000) { printf("immap size error %x\n",&gur->porpllsr); } printf ("Board: MPC8544DS\n"); + lbc->ltesr = 0xffffffff; /* Clear LBC error interrupts */ + lbc->lteir = 0xffffffff; /* Enable LBC error interrupts */ + ecm->eedr = 0xffffffff; /* Clear ecm errors */ + ecm->eeer = 0xffffffff; /* Enable ecm errors */ + return 0; } @@ -118,6 +127,316 @@ testdram(void) } #endif +#ifdef CONFIG_PCI1 +static struct pci_controller pci1_hose; +#endif + +#ifdef CONFIG_PCIE1 +static struct pci_controller pcie1_hose; +#endif + +#ifdef CONFIG_PCIE2 +static struct pci_controller pcie2_hose; +#endif + +#ifdef CONFIG_PCIE3 +static struct pci_controller pcie3_hose; +#endif + +int first_free_busno=0; + +void +pci_init_board(void) +{ + volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile ccsr_gur_t *gur = &immap->im_gur; + uint devdisr = gur->devdisr; + uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; + uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16; + + debug (" pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n", + devdisr, io_sel, host_agent); + + if (io_sel & 1) { + if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS)) + printf (" eTSEC1 is in sgmii mode.\n"); + if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS)) + printf (" eTSEC3 is in sgmii mode.\n"); + } + +#ifdef CONFIG_PCIE3 +{ + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE3_ADDR; + extern void fsl_pci_init(struct pci_controller *hose); + struct pci_controller *hose = &pcie3_hose; + int pcie_ep = (host_agent == 3); + int pcie_configured = io_sel >= 1; + + if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ + printf ("\n PCIE3 connected to ULI as %s (base address %x)", + pcie_ep ? "End Point" : "Root Complex", + (uint)pci); + if (pci->pme_msg_det) { + pci->pme_msg_det = 0xffffffff; + debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det); + } + printf ("\n"); + + /* inbound */ + pci_set_region(hose->regions + 0, + CFG_PCI_MEMORY_BUS, + CFG_PCI_MEMORY_PHYS, + CFG_PCI_MEMORY_SIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + /* outbound memory */ + pci_set_region(hose->regions + 1, + CFG_PCIE3_MEM_BASE, + CFG_PCIE3_MEM_PHYS, + CFG_PCIE3_MEM_SIZE, + PCI_REGION_MEM); + + /* outbound io */ + pci_set_region(hose->regions + 2, + CFG_PCIE3_IO_BASE, + CFG_PCIE3_IO_PHYS, + CFG_PCIE3_IO_SIZE, + PCI_REGION_IO); + + hose->region_count = 3; +#ifdef CFG_PCIE3_MEM_BASE2 + /* outbound memory */ + pci_set_region(hose->regions + 3, + CFG_PCIE3_MEM_BASE2, + CFG_PCIE3_MEM_PHYS2, + CFG_PCIE3_MEM_SIZE2, + PCI_REGION_MEM); + hose->region_count++; +#endif + hose->first_busno=first_free_busno; + pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); + + fsl_pci_init(hose); + + first_free_busno=hose->last_busno+1; + printf (" PCIE3 on bus %02x - %02x\n", + hose->first_busno,hose->last_busno); + + } else { + printf (" PCIE3: disabled\n"); + } + + } +#else + gur->devdisr |= MPC85xx_DEVDISR_PCIE3; /* disable */ +#endif + +#ifdef CONFIG_PCIE1 + { + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR; + extern void fsl_pci_init(struct pci_controller *hose); + struct pci_controller *hose = &pcie1_hose; + int pcie_ep = (host_agent == 5); + int pcie_configured = io_sel & 6; + + if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ + printf ("\n PCIE1 connected to Slot2 as %s (base address %x)", + pcie_ep ? "End Point" : "Root Complex", + (uint)pci); + if (pci->pme_msg_det) { + pci->pme_msg_det = 0xffffffff; + debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det); + } + printf ("\n"); + + /* inbound */ + pci_set_region(hose->regions + 0, + CFG_PCI_MEMORY_BUS, + CFG_PCI_MEMORY_PHYS, + CFG_PCI_MEMORY_SIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + /* outbound memory */ + pci_set_region(hose->regions + 1, + CFG_PCIE1_MEM_BASE, + CFG_PCIE1_MEM_PHYS, + CFG_PCIE1_MEM_SIZE, + PCI_REGION_MEM); + + /* outbound io */ + pci_set_region(hose->regions + 2, + CFG_PCIE1_IO_BASE, + CFG_PCIE1_IO_PHYS, + CFG_PCIE1_IO_SIZE, + PCI_REGION_IO); + + hose->region_count = 3; +#ifdef CFG_PCIE1_MEM_BASE2 + /* outbound memory */ + pci_set_region(hose->regions + 3, + CFG_PCIE1_MEM_BASE2, + CFG_PCIE1_MEM_PHYS2, + CFG_PCIE1_MEM_SIZE2, + PCI_REGION_MEM); + hose->region_count++; +#endif + hose->first_busno=first_free_busno; + + pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); + + fsl_pci_init(hose); + + first_free_busno=hose->last_busno+1; + printf(" PCIE1 on bus %02x - %02x\n", + hose->first_busno,hose->last_busno); + + } else { + printf (" PCIE1: disabled\n"); + } + + } +#else + gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */ +#endif + +#ifdef CONFIG_PCIE2 + { + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE2_ADDR; + extern void fsl_pci_init(struct pci_controller *hose); + struct pci_controller *hose = &pcie2_hose; + int pcie_ep = (host_agent == 3); + int pcie_configured = io_sel & 4; + + if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ + printf ("\n PCIE2 connected to Slot 1 as %s (base address %x)", + pcie_ep ? "End Point" : "Root Complex", + (uint)pci); + if (pci->pme_msg_det) { + pci->pme_msg_det = 0xffffffff; + debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det); + } + printf ("\n"); + + /* inbound */ + pci_set_region(hose->regions + 0, + CFG_PCI_MEMORY_BUS, + CFG_PCI_MEMORY_PHYS, + CFG_PCI_MEMORY_SIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + /* outbound memory */ + pci_set_region(hose->regions + 1, + CFG_PCIE2_MEM_BASE, + CFG_PCIE2_MEM_PHYS, + CFG_PCIE2_MEM_SIZE, + PCI_REGION_MEM); + + /* outbound io */ + pci_set_region(hose->regions + 2, + CFG_PCIE2_IO_BASE, + CFG_PCIE2_IO_PHYS, + CFG_PCIE2_IO_SIZE, + PCI_REGION_IO); + + hose->region_count = 3; +#ifdef CFG_PCIE2_MEM_BASE2 + /* outbound memory */ + pci_set_region(hose->regions + 3, + CFG_PCIE2_MEM_BASE2, + CFG_PCIE2_MEM_PHYS2, + CFG_PCIE2_MEM_SIZE2, + PCI_REGION_MEM); + hose->region_count++; +#endif + hose->first_busno=first_free_busno; + pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); + + fsl_pci_init(hose); + first_free_busno=hose->last_busno+1; + printf (" PCIE2 on bus %02x - %02x\n", + hose->first_busno,hose->last_busno); + + } else { + printf (" PCIE2: disabled\n"); + } + + } +#else + gur->devdisr |= MPC85xx_DEVDISR_PCIE2; /* disable */ +#endif + + +#ifdef CONFIG_PCI1 +{ + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR; + extern void fsl_pci_init(struct pci_controller *hose); + struct pci_controller *hose = &pci1_hose; + + uint pci_agent = (host_agent == 6); + uint pci_speed = 66666000; /*get_clock_freq (); PCI PSPEED in [4:5] */ + uint pci_32 = 1; + uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; /* PORDEVSR[14] */ + uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; /* PORPLLSR[16] */ + + + if (!(devdisr & MPC85xx_DEVDISR_PCI1)) { + printf ("\n PCI: %d bit, %s MHz, %s, %s, %s (base address %x)\n", + (pci_32) ? 32 : 64, + (pci_speed == 33333000) ? "33" : + (pci_speed == 66666000) ? "66" : "unknown", + pci_clk_sel ? "sync" : "async", + pci_agent ? "agent" : "host", + pci_arb ? "arbiter" : "external-arbiter", + (uint)pci + ); + + /* inbound */ + pci_set_region(hose->regions + 0, + CFG_PCI_MEMORY_BUS, + CFG_PCI_MEMORY_PHYS, + CFG_PCI_MEMORY_SIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + /* outbound memory */ + pci_set_region(hose->regions + 1, + CFG_PCI1_MEM_BASE, + CFG_PCI1_MEM_PHYS, + CFG_PCI1_MEM_SIZE, + PCI_REGION_MEM); + + /* outbound io */ + pci_set_region(hose->regions + 2, + CFG_PCI1_IO_BASE, + CFG_PCI1_IO_PHYS, + CFG_PCI1_IO_SIZE, + PCI_REGION_IO); + hose->region_count = 3; +#ifdef CFG_PCIE3_MEM_BASE2 + /* outbound memory */ + pci_set_region(hose->regions + 3, + CFG_PCIE3_MEM_BASE2, + CFG_PCIE3_MEM_PHYS2, + CFG_PCIE3_MEM_SIZE2, + PCI_REGION_MEM); + hose->region_count++; +#endif + hose->first_busno=first_free_busno; + pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); + + fsl_pci_init(hose); + first_free_busno=hose->last_busno+1; + printf ("PCI on bus %02x - %02x\n", + hose->first_busno,hose->last_busno); + } else { + printf (" PCI: disabled\n"); + } +} +#else + gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */ +#endif +} + + int last_stage_init(void) { return 0; @@ -192,6 +511,37 @@ ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); + p = ft_get_prop(blob, "/memory/reg", &len); + if (p != NULL) { + *p++ = cpu_to_be32(bd->bi_memstart); + *p = cpu_to_be32(bd->bi_memsize); + } +#ifdef CONFIG_PCIE1 + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@a000/bus-range", &len); + if (p != NULL) { + p[0] = 0; + p[1] = pcie1_hose.last_busno - pcie1_hose.first_busno; + debug("PCI@a000 first_busno=%d last_busno=%d\n",p[0],p[1]); + } +#endif +#ifdef CONFIG_PCIE2 + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@9000/bus-range", &len); + if (p != NULL) { + p[0] = 0; + p[1] = pcie2_hose.last_busno - pcie2_hose.first_busno; + debug("PCI@9000 first_busno=%d last_busno=%d\n",p[0],p[1]); + } +#endif +#ifdef CONFIG_PCIE3 + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@b000/bus-range", &len); + if (p != NULL) { + p[0] = 0; + p[1] = pcie3_hose.last_busno - pcie3_hose.first_busno;; + debug("PCI@b000 first_busno=%d last_busno=%d\n",p[0],p[1]); + } +#endif + ft_cpu_setup(blob, bd); + p = ft_get_prop(blob, "/memory/reg", &len); if (p != NULL) { *p++ = cpu_to_be32(bd->bi_memstart); diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h index e002d2838e9..77f885daa67 100644 --- a/include/asm-ppc/immap_85xx.h +++ b/include/asm-ppc/immap_85xx.h @@ -1,6 +1,8 @@ /* * MPC85xx Internal Memory Map * + * Copyright 2007 Freescale Semiconductor. + * * Copyright(c) 2002,2003 Motorola Inc. * Xianghua Xiao (x.xiao@motorola.com) * @@ -1526,8 +1528,22 @@ typedef struct ccsr_rio { typedef struct ccsr_gur { uint porpllsr; /* 0xe0000 - POR PLL ratio status register */ uint porbmsr; /* 0xe0004 - POR boot mode status register */ +#define MPC85xx_PORBMSR_HA 0x00070000 uint porimpscr; /* 0xe0008 - POR I/O impedance status and control register */ uint pordevsr; /* 0xe000c - POR I/O device status regsiter */ +#define MPC85xx_PORDEVSR_SGMII1_DIS 0x20000000 +#define MPC85xx_PORDEVSR_SGMII2_DIS 0x10000000 +#define MPC85xx_PORDEVSR_SGMII3_DIS 0x08000000 +#define MPC85xx_PORDEVSR_SGMII4_DIS 0x04000000 +#define MPC85xx_PORDEVSR_IO_SEL 0x00380000 +#define MPC85xx_PORDEVSR_PCI2_ARB 0x00040000 +#define MPC85xx_PORDEVSR_PCI1_ARB 0x00020000 +#define MPC85xx_PORDEVSR_PCI1_PCI32 0x00010000 +#define MPC85xx_PORDEVSR_PCI1_SPD 0x00008000 +#define MPC85xx_PORDEVSR_PCI2_SPD 0x00004000 +#define MPC85xx_PORDEVSR_DRAM_RTYPE 0x00000060 +#define MPC85xx_PORDEVSR_RIO_CTLS 0x00000008 +#define MPC85xx_PORDEVSR_RIO_DEV_ID 0x00000007 uint pordbgmsr; /* 0xe0010 - POR debug mode status register */ char res1[12]; uint gpporcr; /* 0xe0020 - General-purpose POR configuration register */ @@ -1541,6 +1557,25 @@ typedef struct ccsr_gur { uint pmuxcr; /* 0xe0060 - Alternate function signal multiplex control */ char res6[12]; uint devdisr; /* 0xe0070 - Device disable control */ +#define MPC85xx_DEVDISR_PCI1 0x80000000 +#define MPC85xx_DEVDISR_PCI2 0x40000000 +#define MPC85xx_DEVDISR_PCIE 0x20000000 +#define MPC85xx_DEVDISR_LBC 0x08000000 +#define MPC85xx_DEVDISR_PCIE2 0x04000000 +#define MPC85xx_DEVDISR_PCIE3 0x02000000 +#define MPC85xx_DEVDISR_SEC 0x01000000 +#define MPC85xx_DEVDISR_SRIO 0x00080000 +#define MPC85xx_DEVDISR_RMSG 0x00040000 +#define MPC85xx_DEVDISR_DDR 0x00010000 +#define MPC85xx_DEVDISR_CPU 0x00008000 +#define MPC85xx_DEVDISR_TB 0x00004000 +#define MPC85xx_DEVDISR_DMA 0x00000400 +#define MPC85xx_DEVDISR_TSEC1 0x00000080 +#define MPC85xx_DEVDISR_TSEC2 0x00000040 +#define MPC85xx_DEVDISR_TSEC3 0x00000020 +#define MPC85xx_DEVDISR_TSEC4 0x00000010 +#define MPC85xx_DEVDISR_I2C 0x00000004 +#define MPC85xx_DEVDISR_DUART 0x00000002 char res7[12]; uint powmgtcsr; /* 0xe0080 - Power management status and control register */ char res8[12]; @@ -1562,7 +1597,7 @@ typedef struct ccsr_gur { uint ddrioovcr; /* 0xe0f24 - DDR IO Override Control */ uint res14; /* 0xe0f28 */ uint tsec34ioovcr; /* 0xe0f2c - eTSEC 3/4 IO override control */ - char res15[61651]; + char res15[61648]; /* 0xe0f30 to 0xefffff */ } ccsr_gur_t; #define PORDEVSR_PCI (0x00800000) /* PCI Mode */ diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index d0f94a3e220..32934e15506 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -34,14 +34,14 @@ #define CONFIG_MPC8544 1 #define CONFIG_MPC8544DS 1 -#undef CONFIG_PCI /* Enable PCI/PCIE */ -#undef CONFIG_PCI1 /* PCI controller 1 */ -#undef CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ -#undef CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */ -#undef CONFIG_PCIE3 /* PCIE controler 3 (ULI bridge) */ -#undef CONFIG_FSL_PCI_INIT /* Use common FSL init code */ - -#define CONFIG_TSEC_ENET /* tsec ethernet support */ +#define CONFIG_PCI 1 /* Enable PCI/PCIE */ +#define CONFIG_PCI1 1 /* PCI controller 1 */ +#define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */ +#define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */ +#define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */ +#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ + +#define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ #undef CONFIG_DDR_DLL @@ -52,6 +52,7 @@ #define CONFIG_MEM_INIT_VALUE 0xDeadBeef #define CONFIG_DDR_ECC_CMD +#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */ /* * When initializing flash, if we cannot find the manufacturer ID, @@ -70,7 +71,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* * These can be toggled for performance analysis, otherwise use default. */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ +#define CONFIG_L2_CACHE /* toggle L2 cache */ #define CONFIG_BTB /* toggle branch predition */ #define CONFIG_ADDR_STREAMING /* toggle addr streaming */ #define CONFIG_CLEAR_LAW0 /* Clear LAW0 in cpu_init_r */ @@ -86,13 +87,13 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CFG_MEMTEST_START 0x00200000 /* memtest works on */ #define CFG_MEMTEST_END 0x00400000 #define CFG_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */ +#define CONFIG_PANIC_HANG /* do not reset board on panic */ /* * Base addresses -- Note these are effective addresses where the * actual resources get mapped (not physical addresses) */ -#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ +#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ #define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */ #define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */ @@ -344,7 +345,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SATA_ULI5288 #define CFG_SCSI_MAX_SCSI_ID 4 #define CFG_SCSI_MAX_LUN 1 -#define CFG_SCSI_MAX_DEVICE (CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN) +#define CFG_SCSI_MAX_DEVICE (CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN) #define CFG_SCSI_MAXDEVICE CFG_SCSI_MAX_DEVICE #endif /* SCSCI */ @@ -354,7 +355,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #if defined(CONFIG_TSEC_ENET) #ifndef CONFIG_NET_MULTI -#define CONFIG_NET_MULTI 1 +#define CONFIG_NET_MULTI 1 #endif #define CONFIG_MII 1 /* MII PHY management */ @@ -365,6 +366,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_TSEC3_NAME "eTSEC3" #undef CONFIG_MPC85XX_FEC +#define CONFIG_TSEC_TBI 1 /* enable internal TBI phy */ +#define CONFIG_SGMII_RISER +#define TSEC1_SGMII_PHY_ADDR_OFFSET 0x1c /* sgmii phy base */ + #define TSEC1_PHY_ADDR 0 #define TSEC3_PHY_ADDR 1 @@ -374,7 +379,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_ETHPRIME "eTSEC1" #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ - #endif /* CONFIG_TSEC_ENET */ /* @@ -392,7 +396,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - /* * BOOTP options */ @@ -415,6 +418,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_CMD_PCI #define CONFIG_CMD_BEDBUG #define CONFIG_CMD_NET + #define CONFIG_CMD_SCSI + #define CONFIG_CMD_EXT2 #endif @@ -441,10 +446,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ /* Cache Configuration */ -#define CFG_DCACHE_SIZE 32768 +#define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 #if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ @@ -482,7 +487,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_HOSTNAME 8544ds_unknown #define CONFIG_ROOTPATH /nfs/mpc85xx -#define CONFIG_BOOTFILE 8544ds_tmt/uImage.uboot +#define CONFIG_BOOTFILE 8544ds/uImage.uboot +#define CONFIG_UBOOTPATH 8544ds/u-boot.bin /* TFTP server */ #define CONFIG_SERVERIP 192.168.0.1 #define CONFIG_GATEWAYIP 192.168.0.1 @@ -491,7 +497,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/ #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ +#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ #define CONFIG_BAUDRATE 115200 @@ -499,10 +505,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define PCIE_ENV \ "pciereg=md ${a}000 6; md ${a}020 4; md ${a}bf8 2; echo o;md ${a}c00 25;" \ "echo i; md ${a}da0 15; echo e;md ${a}e00 e; echo d; md ${a}f00 c\0" \ - "pcie1regs=setenv a e000a; run pciereg\0" \ - "pcie2regs=setenv a e0009; run pciereg\0" \ - "pcie3regs=setenv a e000b; run pciereg\0" \ - "pcieerr=md ${a}020 1; md ${a}e00;" \ + "pcieerr=md ${a}020 1; md ${a}e00 e;" \ "pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \ "pci d.w $b.0 56 1;" \ "pci d $b.0 104 1;pci d $b.0 110 1;pci d $b.0 130 1\0" \ @@ -511,12 +514,18 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); "pci w $b.0 104 ffffffff; pci w $b.0 110 ffffffff;" \ "pci w $b.0 130 ffffffff\0" \ "pciecfg=pci d $b.0 0 20; pci d $b.0 100 e; pci d $b.0 400 69\0" \ - "pcie1err=setenv a e000a; run pcieerr\0" \ - "pcie2err=setenv a e0009; run pcieerr\0" \ - "pcie3err=setenv a e000b; run pcieerr\0" \ - "pcie1errc=setenv a e000a; run pcieerrc\0" \ - "pcie2errc=setenv a e0009; run pcieerrc\0" \ - "pcie3errc=setenv a e000b; run pcieerrc\0" + "pcie1regs=setenv a e000a; run pciereg\0" \ + "pcie2regs=setenv a e0009; run pciereg\0" \ + "pcie3regs=setenv a e000b; run pciereg\0" \ + "pcie1cfg=setenv b 3; run pciecfg\0" \ + "pcie2cfg=setenv b 5; run pciecfg\0" \ + "pcie3cfg=setenv b 0; run pciecfg\0" \ + "pcie1err=setenv a e000a; setenv b 3; run pcieerr\0" \ + "pcie2err=setenv a e0009; setenv b 5; run pcieerr\0" \ + "pcie3err=setenv a e000b; setenv b 0; run pcieerr\0" \ + "pcie1errc=setenv a e000a; setenv b 3; run pcieerrc\0" \ + "pcie2errc=setenv a e0009; setenv b 5; run pcieerrc\0" \ + "pcie3errc=setenv a e000b; setenv b 0; run pcieerrc\0" #else #define PCIE_ENV "" #endif @@ -524,14 +533,14 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #if defined(CONFIG_PCI1) #define PCI_ENV \ "pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \ - "echo e;md ${a}e00 9\0" \ + "echo e;md ${a}e00 9\0" \ "pci1regs=setenv a e0008; run pcireg\0" \ "pcierr=md ${a}e00 8; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \ "pci d.w $b.0 56 1\0" \ - "pcierrc=mw ${a}e00 ffffffff; pci w.b $b.0 7 ff; pci w.w $b.0 1e ffff;" \ - "pci w.w $b.0 56 ffff\0" \ - "pci1err=setenv a e0008; run pcierr\0" \ - "pci1errc=setenv a e0008; run pcierrc\0" + "pcierrc=mw ${a}e00 ffffffff; mw ${a}e0c 0; pci w.b $b.0 7 ff;" \ + "pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff\0" \ + "pci1err=setenv a e0008; setenv b 7; run pcierr\0" \ + "pci1errc=setenv a e0008; setenv b 7; run pcierrc\0" #else #define PCI_ENV "" #endif @@ -551,25 +560,39 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define ENET_ENV "" #endif -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ + "tftpflash=tftpboot $loadaddr $uboot; " \ + "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ + "erase " MK_STR(TEXT_BASE) " +$filesize; " \ + "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ + "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ + "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ "consoledev=ttyS0\0" \ "ramdiskaddr=2000000\0" \ - "ramdiskfile=8544ds_tmt/ramdisk.uboot\0" \ - "fdtaddr=400000\0" \ - "fdtfile=8544ds_tmt/mpc8544ds.dtb\0" \ - "eoi=mw e00400b0 0\0" \ - "iack=md e00400a0 1\0" \ + "ramdiskfile=8544ds/ramdisk.uboot\0" \ + "dtbaddr=c00000\0" \ + "dtbfile=8544ds/mpc8544ds.dtb\0" \ + "bdev=sda3\0" \ + "eoi=mw e00400b0 0\0" \ + "iack=md e00400a0 1\0" \ "ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4; md ${a}bf0 4;" \ "md ${a}e00 3; md ${a}e20 3; md ${a}e40 7; md ${a}f00 5\0" \ - "ddrregs=setenv a e0002; run ddrreg\0" \ + "ddrregs=setenv a e0002; run ddrreg\0" \ "gureg=md ${a}000 2c; md ${a}0b0 1; md ${a}0c0 1; md ${a}b20 3;" \ - "md ${a}e00 1; md ${a}e60 1; md ${a}ef0 15\0" \ - "guregs=setenv a e00e0; run gureg\0" \ + "md ${a}e00 1; md ${a}e60 1; md ${a}ef0 15\0" \ + "guregs=setenv a e00e0; run gureg\0" \ "ecmreg=md ${a}000 1; md ${a}010 1; md ${a}bf8 2; md ${a}e00 6\0" \ - "ecmregs=setenv a e0001; run ecmreg\0" \ - PCIE_ENV \ - PCI_ENV \ + "ecmregs=setenv a e0001; run ecmreg\0" \ + "lawregs=md e0000c08 4b\0" \ + "lbcregs=md e0005000 36\0" \ + "dma0regs=md e0021100 12\0" \ + "dma1regs=md e0021180 12\0" \ + "dma2regs=md e0021200 12\0" \ + "dma3regs=md e0021280 12\0" \ + PCIE_ENV \ + PCI_ENV \ ENET_ENV @@ -579,23 +602,23 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ "console=$consoledev,$baudrate $othbootargs;" \ "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" + "tftp $dtbaddr $dtbfile;" \ + "bootm $loadaddr - $dtbaddr" -#define CONFIG_RAMBOOTCOMMAND \ +#define CONFIG_RAMBOOTCOMMAND \ "setenv bootargs root=/dev/ram rw " \ "console=$consoledev,$baudrate $othbootargs;" \ "tftp $ramdiskaddr $ramdiskfile;" \ "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" + "tftp $dtbaddr $dtbfile;" \ + "bootm $loadaddr $ramdiskaddr $dtbaddr" -#define CONFIG_BOOTCOMMAND \ - "setenv bootargs root=/dev/sda3 rw " \ +#define CONFIG_BOOTCOMMAND \ + "setenv bootargs root=/dev/$bdev rw " \ "console=$consoledev,$baudrate $othbootargs;" \ "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" + "tftp $dtbaddr $dtbfile;" \ + "bootm $loadaddr - $dtbaddr" #endif /* __CONFIG_H */ -- cgit v1.3.1 From f2cff6b104f82b993bef6086ce0c97159bbe1add Mon Sep 17 00:00:00 2001 From: Ed Swarthout Date: Fri, 27 Jul 2007 01:50:52 -0500 Subject: 8548cds PCIE support. Make the early L1 cache stack region guarded to prevent speculative fetches outside the locked range. Use _PHYS defines, not _MEM for cpu-side PCI memory mapped regions. init.S whitespace cleanup. Allow TEXT_BASE value to be specified on command line. This allows it to be set to 0xfffc0000 which cuts the uboot binary in half. Clear and enable lbc and ecm errors. Update last_busno in device-tree for pci and pcie. Remove load of obsolete cpu/mpc85xx/pci.0 Signed-off-by: Ed Swarthout Acked-by: Andy Fleming --- board/cds/mpc8548cds/config.mk | 4 +- board/cds/mpc8548cds/init.S | 162 +++++++++--------- board/cds/mpc8548cds/mpc8548cds.c | 237 +++++++++++++++++++++++---- board/cds/mpc8548cds/u-boot.lds | 3 +- include/configs/MPC8548CDS.h | 337 ++++++++++++++++++++++++++------------ 5 files changed, 522 insertions(+), 221 deletions(-) (limited to 'include/configs') diff --git a/board/cds/mpc8548cds/config.mk b/board/cds/mpc8548cds/config.mk index 242a6762000..b23bc8737d8 100644 --- a/board/cds/mpc8548cds/config.mk +++ b/board/cds/mpc8548cds/config.mk @@ -1,5 +1,5 @@ # -# Copyright 2004 Freescale Semiconductor. +# Copyright 2004, 2007 Freescale Semiconductor. # # See file CREDITS for list of people who contributed to this # project. @@ -23,7 +23,9 @@ # # mpc8548cds board # +ifndef TEXT_BASE TEXT_BASE = 0xfff80000 +endif PLATFORM_CPPFLAGS += -DCONFIG_E500=1 PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1 diff --git a/board/cds/mpc8548cds/init.S b/board/cds/mpc8548cds/init.S index d468f5b618a..72940b0350b 100644 --- a/board/cds/mpc8548cds/init.S +++ b/board/cds/mpc8548cds/init.S @@ -1,5 +1,5 @@ /* - * Copyright 2004 Freescale Semiconductor. + * Copyright 2004, 2007 Freescale Semiconductor. * Copyright 2002,2003, Motorola Inc. * * See file CREDITS for list of people who contributed to this @@ -28,6 +28,12 @@ #include #include +#define LAWAR_TRGT_PCI1 0x00000000 +#define LAWAR_TRGT_PCI2 0x00100000 +#define LAWAR_TRGT_PCIE 0x00200000 +#define LAWAR_TRGT_RIO 0x00c00000 +#define LAWAR_TRGT_LBC 0x00400000 +#define LAWAR_TRGT_DDR 0x00f00000 /* * TLB0 and TLB1 Entries @@ -47,8 +53,8 @@ */ #define entry_start \ - mflr r1 ; \ - bl 0f ; + mflr r1 ; \ + bl 0f ; #define entry_end \ 0: mflr r0 ; \ @@ -84,8 +90,8 @@ tlb1_entry: #endif /* - * TLB0 16K Cacheable, non-guarded - * 0xd001_0000 16K Temporary Global data for initialization + * TLB0 16K Cacheable, guarded + * Temporary Global data for initialization * * Use four 4K TLB0 entries. These entries must be cacheable * as they provide the bootstrap memory before the memory @@ -97,28 +103,28 @@ tlb1_entry: .long TLB1_MAS0(0, 0, 0) .long TLB1_MAS1(1, 0, 0, 0, 0) .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR), - 0,0,0,0,0,0,0,0) + 0,0,0,0,0,0,1,0) .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR), 0,0,0,0,0,1,0,1,0,1) .long TLB1_MAS0(0, 0, 0) .long TLB1_MAS1(1, 0, 0, 0, 0) .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 4 * 1024), - 0,0,0,0,0,0,0,0) + 0,0,0,0,0,0,1,0) .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 4 * 1024), 0,0,0,0,0,1,0,1,0,1) .long TLB1_MAS0(0, 0, 0) .long TLB1_MAS1(1, 0, 0, 0, 0) .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024), - 0,0,0,0,0,0,0,0) + 0,0,0,0,0,0,1,0) .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 8 * 1024), 0,0,0,0,0,1,0,1,0,1) .long TLB1_MAS0(0, 0, 0) .long TLB1_MAS1(1, 0, 0, 0, 0) .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 12 * 1024), - 0,0,0,0,0,0,0,0) + 0,0,0,0,0,0,1,0) .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 12 * 1024), 0,0,0,0,0,1,0,1,0,1) @@ -130,51 +136,44 @@ tlb1_entry: */ .long TLB1_MAS0(1, 0, 0) .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M) - .long TLB1_MAS2(E500_TLB_EPN(CFG_FLASH_BASE), 0,0,0,0,1,0,1,0) - .long TLB1_MAS3(E500_TLB_RPN(CFG_FLASH_BASE), 0,0,0,0,0,1,0,1,0,1) + .long TLB1_MAS2(E500_TLB_EPN(CFG_BOOT_BLOCK), 0,0,0,0,1,0,1,0) + .long TLB1_MAS3(E500_TLB_RPN(CFG_BOOT_BLOCK), 0,0,0,0,0,1,0,1,0,1) /* - * TLB 1: 256M Non-cacheable, guarded - * 0x80000000 256M PCI1 MEM + * TLB 1: 1G Non-cacheable, guarded + * 0x80000000 1G PCI1/PCIE 8,9,a,b */ .long TLB1_MAS0(1, 1, 0) - .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) - .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE), 0,0,0,0,1,0,1,0) - .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE), 0,0,0,0,0,1,0,1,0,1) + .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1G) + .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI_PHYS), 0,0,0,0,1,0,1,0) + .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI_PHYS), 0,0,0,0,0,1,0,1,0,1) +#ifdef CFG_RIO_MEM_PHYS /* * TLB 2: 256M Non-cacheable, guarded - * 0x90000000 256M PCI2 MEM */ .long TLB1_MAS0(1, 2, 0) .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) - .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI2_MEM_BASE), + .long TLB1_MAS2(E500_TLB_EPN(CFG_RIO_MEM_PHYS), 0,0,0,0,1,0,1,0) - .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI2_MEM_BASE), - 0,0,0,0,0,1,0,1,0,1) + .long TLB1_MAS3(E500_TLB_RPN(CFG_RIO_MEM_PHYS), 0,0,0,0,0,1,0,1,0,1) /* - * TLB 3: 1GB Non-cacheable, guarded - * 0xa0000000 256M PEX MEM First half - * 0xb0000000 256M PEX MEM Second half - * 0xc0000000 256M Rapid IO MEM First half - * 0xd0000000 256M Rapid IO MEM Second half + * TLB 3: 256M Non-cacheable, guarded */ .long TLB1_MAS0(1, 3, 0) - .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1G) - .long TLB1_MAS2(E500_TLB_EPN(CFG_PEX_MEM_BASE), 0,0,0,0,1,0,1,0) - .long TLB1_MAS3(E500_TLB_RPN(CFG_PEX_MEM_BASE), 0,0,0,0,0,1,0,1,0,1) - - /* - * TLB 4: Reserved for future usage - */ - + .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) + .long TLB1_MAS2(E500_TLB_EPN(CFG_RIO_MEM_PHYS + 0x10000000), + 0,0,0,0,1,0,1,0) + .long TLB1_MAS3(E500_TLB_RPN(CFG_RIO_MEM_PHYS + 0x10000000), + 0,0,0,0,0,1,0,1,0,1) +#endif /* * TLB 5: 64M Non-cacheable, guarded * 0xe000_0000 1M CCSRBAR - * 0xe200_0000 8M PCI1 IO - * 0xe280_0000 8M PCI2 IO - * 0xe300_0000 16M PEX IO + * 0xe200_0000 1M PCI1 IO + * 0xe210_0000 1M PCI2 IO + * 0xe300_0000 1M PCIe IO */ .long TLB1_MAS0(1, 5, 0) .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) @@ -187,17 +186,18 @@ tlb1_entry: */ .long TLB1_MAS0(1, 6, 0) .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) - .long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,0,0,0) - .long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1) + .long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_CACHE_BASE), 0,0,0,0,0,0,0,0) + .long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_CACHE_BASE), 0,0,0,0,0,1,0,1,0,1) /* - * TLB 7: 1M Non-cacheable, guarded - * 0xf8000000 1M CADMUS registers + * TLB 7: 64M Non-cacheable, guarded + * 0xf8000000 64M CADMUS registers, relocated L2SRAM */ .long TLB1_MAS0(1, 7, 0) - .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M) - .long TLB1_MAS2(E500_TLB_EPN(CADMUS_BASE_ADDR), 0,0,0,0,1,0,1,0) - .long TLB1_MAS3(E500_TLB_RPN(CADMUS_BASE_ADDR), 0,0,0,0,0,1,0,1,0,1) + .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) + .long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_NONCACHE_BASE), 0,0,0,0,1,0,1,0) + .long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_NONCACHE_BASE), 0,0,0,0,0,1,0,1,0,1) + 2: entry_end @@ -205,14 +205,13 @@ tlb1_entry: * LAW(Local Access Window) configuration: * * 0x0000_0000 0x7fff_ffff DDR 2G - * 0x8000_0000 0x8fff_ffff PCI1 MEM 256M - * 0x9000_0000 0x9fff_ffff PCI2 MEM 256M - * 0xa000_0000 0xbfff_ffff PEX MEM 512M + * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M + * 0xa000_0000 0xbfff_ffff PCIe MEM 512M * 0xc000_0000 0xdfff_ffff RapidIO 512M * 0xe000_0000 0xe000_ffff CCSR 1M - * 0xe200_0000 0xe27f_ffff PCI1 IO 8M - * 0xe280_0000 0xe2ff_ffff PCI2 IO 8M - * 0xe300_0000 0xe3ff_ffff PEX IO 16M + * 0xe200_0000 0xe10f_ffff PCI1 IO 1M + * 0xe280_0000 0xe20f_ffff PCI2 IO 1M + * 0xe300_0000 0xe30f_ffff PCIe IO 1M * 0xf000_0000 0xf3ff_ffff SDRAM 64M * 0xf800_0000 0xf80f_ffff NVRAM/CADMUS (*) 1M * 0xff00_0000 0xff7f_ffff FLASH (2nd bank) 8M @@ -222,47 +221,50 @@ tlb1_entry: * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window. * If flash is 8M at default position (last 8M), no LAW needed. * - * The defines below are 1-off of the actual LAWAR0 usage. - * So LAWAR3 define uses the LAWAR4 register in the ECM. + * LAW 0 is reserved for boot mapping */ -#define LAWBAR0 0 -#define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN) - -#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff) -#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_256M)) + .section .bootpg, "ax" + .globl law_entry +law_entry: + entry_start -#define LAWBAR2 ((CFG_PCI2_MEM_BASE>>12) & 0xfffff) -#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_256M)) + .long (4f-3f)/8 +3: + .long 0 + .long (LAWAR_TRGT_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN -#define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff) -#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_8M)) +#ifdef CFG_PCI1_MEM_PHYS + .long (CFG_PCI1_MEM_PHYS>>12) & 0xfffff + .long LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M) -#define LAWBAR4 ((CFG_PCI2_IO_PHYS>>12) & 0xfffff) -#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_8M)) + .long (CFG_PCI1_IO_PHYS>>12) & 0xfffff + .long LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_1M) +#endif -/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */ -#define LAWBAR5 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff) -#define LAWAR5 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M)) +#ifdef CFG_PCI2_MEM_PHYS + .long (CFG_PCI2_MEM_PHYS>>12) & 0xfffff + .long LAWAR_EN | LAWAR_TRGT_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M) -#define LAWBAR6 ((CFG_PEX_MEM_BASE>>12) & 0xfffff) -#define LAWAR6 (LAWAR_EN | LAWAR_TRGT_IF_PEX | (LAWAR_SIZE & LAWAR_SIZE_512M)) + .long (CFG_PCI2_IO_PHYS>>12) & 0xfffff + .long LAWAR_EN | LAWAR_TRGT_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_1M) +#endif -#define LAWBAR7 ((CFG_PEX_IO_PHYS>>12) & 0xfffff) -#define LAWAR7 (LAWAR_EN | LAWAR_TRGT_IF_PEX | (LAWAR_SIZE & LAWAR_SIZE_16M)) +#ifdef CFG_PCIE1_MEM_PHYS + .long (CFG_PCIE1_MEM_PHYS>>12) & 0xfffff + .long LAWAR_EN | LAWAR_TRGT_PCIE | (LAWAR_SIZE & LAWAR_SIZE_512M) -#define LAWBAR8 ((CFG_RIO_MEM_BASE>>12) & 0xfffff) -#define LAWAR8 (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M)) + .long (CFG_PCIE1_IO_PHYS>>12) & 0xfffff + .long LAWAR_EN | LAWAR_TRGT_PCIE | (LAWAR_SIZE & LAWAR_SIZE_1M) +#endif - .section .bootpg, "ax" - .globl law_entry + /* LBC window - maps 256M 0xf0000000 -> 0xffffffff */ + .long (CFG_LBC_CACHE_BASE>>12) & 0xfffff + .long LAWAR_EN | LAWAR_TRGT_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M) -law_entry: - entry_start - .long (4f-3f)/8 -3: - .long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3 - .long LAWBAR4,LAWAR4,LAWBAR5,LAWAR5,LAWBAR6,LAWAR6,LAWBAR7,LAWAR7 - .long LAWBAR8,LAWAR8 +#ifdef CFG_RIO_MEM_PHYS + .long (CFG_RIO_MEM_PHYS>>12) & 0xfffff + .long LAWAR_EN | LAWAR_TRGT_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M) +#endif 4: entry_end diff --git a/board/cds/mpc8548cds/mpc8548cds.c b/board/cds/mpc8548cds/mpc8548cds.c index b7236417e8b..242a68c391d 100644 --- a/board/cds/mpc8548cds/mpc8548cds.c +++ b/board/cds/mpc8548cds/mpc8548cds.c @@ -1,5 +1,5 @@ /* - * Copyright 2004 Freescale Semiconductor. + * Copyright 2004, 2007 Freescale Semiconductor. * * (C) Copyright 2002 Scott McNutt * @@ -26,6 +26,7 @@ #include #include #include +#include #include #include @@ -33,10 +34,15 @@ #include "../common/eeprom.h" #include "../common/via.h" +#if defined(CONFIG_OF_FLAT_TREE) +#include +#endif #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) extern void ddr_enable_ecc(unsigned int dram_size); #endif +DECLARE_GLOBAL_DATA_PTR; + extern long int spd_sdram(void); void local_bus_init(void); @@ -56,13 +62,6 @@ int checkboard (void) /* PCI slot in USER bits CSR[6:7] by convention. */ uint pci_slot = get_pci_slot (); - uint pci_dual = get_pci_dual (); /* PCI DUAL in CM_PCI[3] */ - uint pci1_32 = gur->pordevsr & 0x10000; /* PORDEVSR[15] */ - uint pci1_clk_sel = gur->porpllsr & 0x8000; /* PORPLLSR[16] */ - uint pci2_clk_sel = gur->porpllsr & 0x4000; /* PORPLLSR[17] */ - - uint pci1_speed = get_clock_freq (); /* PCI PSPEED in [4:5] */ - uint cpu_board_rev = get_cpu_board_revision (); printf ("Board: CDS Version 0x%02x, PCI Slot %d\n", @@ -71,20 +70,6 @@ int checkboard (void) printf ("CPU Board Revision %d.%d (0x%04x)\n", MPC85XX_CPU_BOARD_MAJOR (cpu_board_rev), MPC85XX_CPU_BOARD_MINOR (cpu_board_rev), cpu_board_rev); - - printf (" PCI1: %d bit, %s MHz, %s\n", - (pci1_32) ? 32 : 64, - (pci1_speed == 33000000) ? "33" : - (pci1_speed == 66000000) ? "66" : "unknown", - pci1_clk_sel ? "sync" : "async"); - - if (pci_dual) { - printf (" PCI2: 32 bit, 66 MHz, %s\n", - pci2_clk_sel ? "sync" : "async"); - } else { - printf (" PCI2: disabled\n"); - } - /* * Initialize local bus. */ @@ -102,6 +87,8 @@ int checkboard (void) */ gur->tsec34ioovcr = 0xe7e0; /* 1110 0111 1110 0xxx */ + ecm->eedr = 0xffffffff; /* clear ecm errors */ + ecm->eeer = 0xffffffff; /* enable ecm errors */ return 0; } @@ -176,6 +163,9 @@ local_bus_init(void) lbc->lcrr |= 0x00030000; asm("sync;isync;msync"); + + lbc->ltesr = 0xffffffff; /* Clear LBC error interrupts */ + lbc->lteir = 0xffffffff; /* Enable LBC error interrupts */ } /* @@ -301,7 +291,7 @@ testdram(void) } #endif -#if defined(CONFIG_PCI) +#if defined(CONFIG_PCI) || defined(CONFIG_PCI1) /* For some reason the Tundra PCI bridge shows up on itself as a * different device. Work around that by refusing to configure it. */ @@ -320,21 +310,175 @@ static struct pci_config_table pci_mpc85xxcds_config_table[] = { {}, }; -static struct pci_controller hose[] = { - { config_table: pci_mpc85xxcds_config_table,}, -#ifdef CONFIG_MPC85XX_PCI2 - {}, -#endif -}; - +static struct pci_controller pci1_hose = { + config_table: pci_mpc85xxcds_config_table}; #endif /* CONFIG_PCI */ +#ifdef CONFIG_PCI2 +static struct pci_controller pci2_hose; +#endif /* CONFIG_PCI2 */ + +#ifdef CONFIG_PCIE1 +static struct pci_controller pcie1_hose; +#endif /* CONFIG_PCIE1 */ + +int first_free_busno=0; + void pci_init_board(void) { -#ifdef CONFIG_PCI - pci_mpc85xx_init(&hose); + volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile ccsr_gur_t *gur = &immap->im_gur; + uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; + uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16; + + +#ifdef CONFIG_PCI1 +{ + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR; + extern void fsl_pci_init(struct pci_controller *hose); + struct pci_controller *hose = &pci1_hose; + struct pci_config_table *table; + + uint pci_32 = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32; /* PORDEVSR[15] */ + uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; /* PORDEVSR[14] */ + uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; /* PORPLLSR[16] */ + + uint pci_agent = (host_agent == 3) || (host_agent == 4 ) || (host_agent == 6); + + uint pci_speed = get_clock_freq (); /* PCI PSPEED in [4:5] */ + + if (!(gur->devdisr & MPC85xx_DEVDISR_PCI1)) { + printf (" PCI: %d bit, %s MHz, %s, %s, %s\n", + (pci_32) ? 32 : 64, + (pci_speed == 33333000) ? "33" : + (pci_speed == 66666000) ? "66" : "unknown", + pci_clk_sel ? "sync" : "async", + pci_agent ? "agent" : "host", + pci_arb ? "arbiter" : "external-arbiter" + ); + + + /* outbound memory */ + pci_set_region(hose->regions + 0, + CFG_PCI1_MEM_BASE, + CFG_PCI1_MEM_PHYS, + CFG_PCI1_MEM_SIZE, + PCI_REGION_MEM); + + /* outbound io */ + pci_set_region(hose->regions + 1, + CFG_PCI1_IO_BASE, + CFG_PCI1_IO_PHYS, + CFG_PCI1_IO_SIZE, + PCI_REGION_IO); + hose->region_count = 2; + + /* relocate config table pointers */ + hose->config_table = \ + (struct pci_config_table *)((uint)hose->config_table + gd->reloc_off); + for (table = hose->config_table; table && table->vendor; table++) + table->config_device += gd->reloc_off; + + hose->first_busno=first_free_busno; + pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); + + fsl_pci_init(hose); + first_free_busno=hose->last_busno+1; + printf ("PCI on bus %02x - %02x\n",hose->first_busno,hose->last_busno); +#ifdef CONFIG_PCIX_CHECK + if (!(gur->pordevsr & PORDEVSR_PCI)) { + /* PCI-X init */ + if (CONFIG_SYS_CLK_FREQ < 66000000) + printf("PCI-X will only work at 66 MHz\n"); + + reg16 = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ + | PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E; + pci_hose_write_config_word(hose, bus, PCIX_COMMAND, reg16); + } #endif + } else { + printf (" PCI: disabled\n"); + } +} +#else + gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */ +#endif + +#ifdef CONFIG_PCI2 +{ + uint pci2_clk_sel = gur->porpllsr & 0x4000; /* PORPLLSR[17] */ + uint pci_dual = get_pci_dual (); /* PCI DUAL in CM_PCI[3] */ + if (pci_dual) { + printf (" PCI2: 32 bit, 66 MHz, %s\n", + pci2_clk_sel ? "sync" : "async"); + } else { + printf (" PCI2: disabled\n"); + } +} +#else + gur->devdisr |= MPC85xx_DEVDISR_PCI2; /* disable */ +#endif /* CONFIG_PCI2 */ + +#ifdef CONFIG_PCIE1 +{ + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR; + extern void fsl_pci_init(struct pci_controller *hose); + struct pci_controller *hose = &pcie1_hose; + int pcie_ep = (host_agent == 0) || (host_agent == 2 ) || (host_agent == 3); + + int pcie_configured = io_sel >= 1; + + if (pcie_configured && !(gur->devdisr & MPC85xx_DEVDISR_PCIE)){ + printf ("\n PCIE connected to slot as %s (base address %x)", + pcie_ep ? "End Point" : "Root Complex", + (uint)pci); + + if (pci->pme_msg_det) { + pci->pme_msg_det = 0xffffffff; + debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det); + } + printf ("\n"); + + /* inbound */ + pci_set_region(hose->regions + 0, + CFG_PCI_MEMORY_BUS, + CFG_PCI_MEMORY_PHYS, + CFG_PCI_MEMORY_SIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + /* outbound memory */ + pci_set_region(hose->regions + 1, + CFG_PCIE1_MEM_BASE, + CFG_PCIE1_MEM_PHYS, + CFG_PCIE1_MEM_SIZE, + PCI_REGION_MEM); + + /* outbound io */ + pci_set_region(hose->regions + 2, + CFG_PCIE1_IO_BASE, + CFG_PCIE1_IO_PHYS, + CFG_PCIE1_IO_SIZE, + PCI_REGION_IO); + + hose->region_count = 3; + + hose->first_busno=first_free_busno; + pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); + + fsl_pci_init(hose); + printf ("PCIE on bus %d - %d\n",hose->first_busno,hose->last_busno); + + first_free_busno=hose->last_busno+1; + + } else { + printf (" PCIE: disabled\n"); + } + } +#else + gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */ +#endif + } int last_stage_init(void) @@ -367,3 +511,32 @@ int last_stage_init(void) return 0; } + + +#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) +void +ft_pci_setup(void *blob, bd_t *bd) +{ + u32 *p; + int len; + + +#ifdef CONFIG_PCI1 + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8000/bus-range", &len); + if (p != NULL) { + p[0] = 0; + p[1] = pci1_hose.last_busno - pci1_hose.first_busno; + debug("PCI@8000 first_busno=%d last_busno=%d\n",p[0],p[1]); + } +#endif + +#ifdef CONFIG_PCIE1 + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@a000/bus-range", &len); + if (p != NULL) { + p[0] = 0; + p[1] = pcie1_hose.last_busno - pcie1_hose.first_busno; + debug("PCI@a000 first_busno=%d last_busno=%d\n",p[0],p[1]); + } +#endif +} +#endif diff --git a/board/cds/mpc8548cds/u-boot.lds b/board/cds/mpc8548cds/u-boot.lds index c1f3495d759..530ba5a721d 100644 --- a/board/cds/mpc8548cds/u-boot.lds +++ b/board/cds/mpc8548cds/u-boot.lds @@ -1,5 +1,5 @@ /* - * Copyright 2004 Freescale Semiconductor. + * Copyright 2004, 2007 Freescale Semiconductor. * * See file CREDITS for list of people who contributed to this * project. @@ -71,7 +71,6 @@ SECTIONS cpu/mpc85xx/cpu.o (.text) drivers/tsec.o (.text) cpu/mpc85xx/speed.o (.text) - cpu/mpc85xx/pci.o (.text) common/dlmalloc.o (.text) lib_generic/crc32.o (.text) lib_ppc/extable.o (.text) diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 2e84fc8748d..d7afdbd606f 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -1,5 +1,5 @@ /* - * Copyright 2004 Freescale Semiconductor. + * Copyright 2004, 2007 Freescale Semiconductor. * * See file CREDITS for list of people who contributed to this * project. @@ -11,7 +11,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -36,8 +36,14 @@ #define CONFIG_MPC8548 1 /* MPC8548 specific */ #define CONFIG_MPC8548CDS 1 /* MPC8548CDS board specific */ -#define CONFIG_PCI -#define CONFIG_TSEC_ENET /* tsec ethernet support */ +#define CONFIG_PCI /* enable any pci type devices */ +#define CONFIG_PCI1 /* PCI controller 1 */ +#define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ +#undef CONFIG_RIO +#undef CONFIG_PCI2 +#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ + +#define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #define CONFIG_DDR_DLL /* possible DLL fix needed */ @@ -46,6 +52,7 @@ #define CONFIG_DDR_ECC /* only for ECC DDR module */ #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ #define CONFIG_MEM_INIT_VALUE 0xDeadBeef +#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */ /* @@ -65,16 +72,16 @@ extern unsigned long get_clock_freq(void); /* * These can be toggled for performance analysis, otherwise use default. */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ +#define CONFIG_L2_CACHE /* toggle L2 cache */ +#define CONFIG_BTB /* toggle branch predition */ +#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ +#define CONFIG_CLEAR_LAW0 /* Clear LAW0 in cpu_init_r */ /* * Only possible on E500 Version 2 or newer cores. */ #define CONFIG_ENABLE_36BIT_PHYS 1 - #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #undef CFG_DRAM_TEST /* memory test, takes time */ @@ -85,10 +92,14 @@ extern unsigned long get_clock_freq(void); * Base addresses -- Note these are effective addresses where the * actual resources get mapped (not physical addresses) */ -#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ +#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ #define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */ #define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */ +#define CFG_PCI1_ADDR (CFG_CCSRBAR+0x8000) +#define CFG_PCI2_ADDR (CFG_CCSRBAR+0x9000) +#define CFG_PCIE1_ADDR (CFG_CCSRBAR+0xa000) + /* * DDR Setup */ @@ -106,7 +117,6 @@ extern unsigned long get_clock_freq(void); #undef CONFIG_CLOCKS_IN_MHZ - /* * Local Bus Definitions */ @@ -124,9 +134,9 @@ extern unsigned long get_clock_freq(void); * Use GPCM = BRx[24:26] = 000 * Valid = BRx[31] = 1 * - * 0 4 8 12 16 20 24 28 - * 1111 1111 1000 0000 0001 0000 0000 0001 = ff801001 BR0 - * 1111 1111 0000 0000 0001 0000 0000 0001 = ff001001 BR1 + * 0 4 8 12 16 20 24 28 + * 1111 1111 1000 0000 0001 0000 0000 0001 = ff801001 BR0 + * 1111 1111 0000 0000 0001 0000 0000 0001 = ff001001 BR1 * * OR0, OR1: * Addr Mask = 8M = ORx[0:16] = 1111 1111 1000 0000 0 @@ -137,11 +147,12 @@ extern unsigned long get_clock_freq(void); * TRLX = use relaxed timing = ORx[29] = 1 * EAD = use external address latch delay = OR[31] = 1 * - * 0 4 8 12 16 20 24 28 - * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65 ORx + * 0 4 8 12 16 20 24 28 + * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65 ORx */ -#define CFG_FLASH_BASE 0xff000000 /* start of FLASH 8M */ +#define CFG_BOOT_BLOCK 0xff000000 /* boot TLB block */ +#define CFG_FLASH_BASE CFG_BOOT_BLOCK /* start of FLASH 16M */ #define CFG_BR0_PRELIM 0xff801001 #define CFG_BR1_PRELIM 0xff001001 @@ -156,7 +167,7 @@ extern unsigned long get_clock_freq(void); #define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ #define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ -#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ #define CFG_FLASH_CFI_DRIVER #define CFG_FLASH_CFI @@ -166,7 +177,12 @@ extern unsigned long get_clock_freq(void); /* * SDRAM on the Local Bus */ -#define CFG_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */ +#define CFG_LBC_CACHE_BASE 0xf0000000 /* Localbus cacheable */ +#define CFG_LBC_CACHE_SIZE 64 +#define CFG_LBC_NONCACHE_BASE 0xf8000000 /* Localbus non-cacheable */ +#define CFG_LBC_NONCACHE_SIZE 64 + +#define CFG_LBC_SDRAM_BASE CFG_LBC_CACHE_BASE /* Localbus SDRAM */ #define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ /* @@ -180,14 +196,14 @@ extern unsigned long get_clock_freq(void); * SDRAM for MSEL = BR2[24:26] = 011 * Valid = BR[31] = 1 * - * 0 4 8 12 16 20 24 28 + * 0 4 8 12 16 20 24 28 * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861 * * FIXME: CFG_LBC_SDRAM_BASE should be masked and OR'ed into * FIXME: the top 17 bits of BR2. */ -#define CFG_BR2_PRELIM 0xf0001861 +#define CFG_BR2_PRELIM 0xf0001861 /* * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64. @@ -196,19 +212,19 @@ extern unsigned long get_clock_freq(void); * 64MB mask for AM, OR2[0:7] = 1111 1100 * XAM, OR2[17:18] = 11 * 9 columns OR2[19-21] = 010 - * 13 rows OR2[23-25] = 100 + * 13 rows OR2[23-25] = 100 * EAD set for extra time OR[31] = 1 * - * 0 4 8 12 16 20 24 28 + * 0 4 8 12 16 20 24 28 * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901 */ #define CFG_OR2_PRELIM 0xfc006901 -#define CFG_LBC_LCRR 0x00030004 /* LB clock ratio reg */ -#define CFG_LBC_LBCR 0x00000000 /* LB config reg */ -#define CFG_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ -#define CFG_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/ +#define CFG_LBC_LCRR 0x00030004 /* LB clock ratio reg */ +#define CFG_LBC_LBCR 0x00000000 /* LB config reg */ +#define CFG_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ +#define CFG_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/ /* * LSDMR masks @@ -236,7 +252,7 @@ extern unsigned long get_clock_freq(void); /* * Common settings for all Local Bus SDRAM commands. * At run time, either BSMA1516 (for CPU 1.1) - * or BSMA1617 (for CPU 1.0) (old) + * or BSMA1617 (for CPU 1.0) (old) * is OR'ed in too. */ #define CFG_LBC_LSDMR_COMMON ( CFG_LBC_LSDMR_RFCR16 \ @@ -256,61 +272,63 @@ extern unsigned long get_clock_freq(void); * Base address of 0xf8000000 = BR[0:16] = 1111 1000 0000 0000 0 * port-size = 8-bits = BR[19:20] = 01 * no parity checking = BR[21:22] = 00 - * GPMC for MSEL = BR[24:26] = 000 - * Valid = BR[31] = 1 + * GPMC for MSEL = BR[24:26] = 000 + * Valid = BR[31] = 1 * - * 0 4 8 12 16 20 24 28 + * 0 4 8 12 16 20 24 28 * 1111 1000 0000 0000 0000 1000 0000 0001 = f8000801 * * For OR3, need: - * 1 MB mask for AM, OR[0:16] = 1111 1111 1111 0000 0 + * 1 MB mask for AM, OR[0:16] = 1111 1111 1111 0000 0 * disable buffer ctrl OR[19] = 0 - * CSNT OR[20] = 1 - * ACS OR[21:22] = 11 - * XACS OR[23] = 1 + * CSNT OR[20] = 1 + * ACS OR[21:22] = 11 + * XACS OR[23] = 1 * SCY 15 wait states OR[24:27] = 1111 max is suboptimal but safe - * SETA OR[28] = 0 - * TRLX OR[29] = 1 - * EHTR OR[30] = 1 - * EAD extra time OR[31] = 1 + * SETA OR[28] = 0 + * TRLX OR[29] = 1 + * EHTR OR[30] = 1 + * EAD extra time OR[31] = 1 * - * 0 4 8 12 16 20 24 28 + * 0 4 8 12 16 20 24 28 * 1111 1111 1111 0000 0000 1111 1111 0111 = fff00ff7 */ #define CADMUS_BASE_ADDR 0xf8000000 -#define CFG_BR3_PRELIM 0xf8000801 -#define CFG_OR3_PRELIM 0xfff00ff7 +#define CFG_BR3_PRELIM 0xf8000801 +#define CFG_OR3_PRELIM 0xfff00ff7 #define CONFIG_L1_INIT_RAM -#define CFG_INIT_RAM_LOCK 1 +#define CFG_INIT_RAM_LOCK 1 #define CFG_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ -#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */ +#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */ + +#define CFG_INIT_L2_ADDR 0xf8f80000 /* relocate boot L2SRAM */ -#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ +#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET -#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ -#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ /* Serial Port */ -#define CONFIG_CONS_INDEX 2 +#define CONFIG_CONS_INDEX 2 #undef CONFIG_SERIAL_SOFTWARE_FIFO #define CFG_NS16550 #define CFG_NS16550_SERIAL -#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_REG_SIZE 1 #define CFG_NS16550_CLK get_bus_freq(0) -#define CFG_BAUDRATE_TABLE \ +#define CFG_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} -#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500) -#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600) +#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500) +#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600) /* Use the HUSH parser */ #define CFG_HUSH_PARSER -#ifdef CFG_HUSH_PARSER +#ifdef CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " #endif @@ -331,55 +349,66 @@ extern unsigned long get_clock_freq(void); */ #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ #define CONFIG_HARD_I2C /* I2C with hardware support*/ -#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_EEPROM_ADDR 0x57 #define CFG_I2C_SLAVE 0x7F -#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ #define CFG_I2C_OFFSET 0x3000 /* * General PCI * Memory space is mapped 1-1, but I/O space must start from 0. */ +#define CFG_PCI_PHYS 0x80000000 /* 1G PCI TLB */ + #define CFG_PCI1_MEM_BASE 0x80000000 #define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE -#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ #define CFG_PCI1_IO_BASE 0x00000000 #define CFG_PCI1_IO_PHYS 0xe2000000 -#define CFG_PCI1_IO_SIZE 0x00800000 /* 8M */ +#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */ -#define CFG_PCI2_MEM_BASE 0x90000000 +#ifdef CONFIG_PCI2 +#define CFG_PCI2_MEM_BASE 0xa0000000 #define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE -#define CFG_PCI2_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */ #define CFG_PCI2_IO_BASE 0x00000000 #define CFG_PCI2_IO_PHYS 0xe2800000 -#define CFG_PCI2_IO_SIZE 0x00800000 /* 8M */ +#define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */ +#endif -#define CFG_PEX_MEM_BASE 0xa0000000 -#define CFG_PEX_MEM_PHYS CFG_PEX_MEM_BASE -#define CFG_PEX_MEM_SIZE 0x20000000 /* 512M */ -#define CFG_PEX_IO_BASE 0x00000000 -#define CFG_PEX_IO_PHYS 0xe3000000 -#define CFG_PEX_IO_SIZE 0x01000000 /* 16M */ +#ifdef CONFIG_PCIE1 +#define CFG_PCIE1_MEM_BASE 0xa0000000 +#define CFG_PCIE1_MEM_PHYS CFG_PCIE1_MEM_BASE +#define CFG_PCIE1_MEM_SIZE 0x20000000 /* 512M */ +#define CFG_PCIE1_IO_BASE 0x00000000 +#define CFG_PCIE1_IO_PHYS 0xe3000000 +#define CFG_PCIE1_IO_SIZE 0x00100000 /* 1M */ +#endif +#ifdef CONFIG_RIO /* * RapidIO MMU */ #define CFG_RIO_MEM_BASE 0xC0000000 #define CFG_RIO_MEM_SIZE 0x20000000 /* 512M */ +#endif #if defined(CONFIG_PCI) #define CONFIG_NET_MULTI -#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_85XX_PCI2 +#define CONFIG_PCI_PNP /* do pci plug-and-play */ #undef CONFIG_EEPRO100 #undef CONFIG_TULIP #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ + +/* PCI view of System Memory */ +#define CFG_PCI_MEMORY_BUS 0x00000000 +#define CFG_PCI_MEMORY_PHYS 0x00000000 +#define CFG_PCI_MEMORY_SIZE 0x80000000 #endif /* CONFIG_PCI */ @@ -387,7 +416,7 @@ extern unsigned long get_clock_freq(void); #if defined(CONFIG_TSEC_ENET) #ifndef CONFIG_NET_MULTI -#define CONFIG_NET_MULTI 1 +#define CONFIG_NET_MULTI 1 #endif #define CONFIG_MII 1 /* MII PHY management */ @@ -397,7 +426,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_TSEC2_NAME "eTSEC1" #define CONFIG_TSEC3 1 #define CONFIG_TSEC3_NAME "eTSEC2" -#undef CONFIG_TSEC4 +#define CONFIG_TSEC4 #define CONFIG_TSEC4_NAME "eTSEC3" #undef CONFIG_MPC85XX_FEC @@ -413,7 +442,7 @@ extern unsigned long get_clock_freq(void); /* Options are: eTSEC[0-3] */ #define CONFIG_ETHPRIME "eTSEC0" - +#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ #endif /* CONFIG_TSEC_ENET */ /* @@ -473,7 +502,7 @@ extern unsigned long get_clock_freq(void); * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 @@ -501,58 +530,154 @@ extern unsigned long get_clock_freq(void); /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) -#define CONFIG_ETHADDR 00:E0:0C:00:00:FD +#define CONFIG_ETHADDR 00:E0:0C:00:00:FD #define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD +#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD #define CONFIG_HAS_ETH2 -#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD +#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD #define CONFIG_HAS_ETH3 -#define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD +#define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD #endif -#define CONFIG_IPADDR 192.168.1.253 +#define CONFIG_IPADDR 192.168.1.253 -#define CONFIG_HOSTNAME unknown -#define CONFIG_ROOTPATH /nfsroot -#define CONFIG_BOOTFILE your.uImage +#define CONFIG_HOSTNAME unknown +#define CONFIG_ROOTPATH /nfsroot +#define CONFIG_BOOTFILE 8548cds/uImage.uboot +#define CONFIG_UBOOTPATH 8548cds/u-boot.bin /* TFTP server */ -#define CONFIG_SERVERIP 192.168.1.1 +#define CONFIG_SERVERIP 192.168.1.1 #define CONFIG_GATEWAYIP 192.168.1.1 -#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_LOADADDR 200000 /*default location for tftp and bootm*/ +#define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/ -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ +#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ +#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ #define CONFIG_BAUDRATE 115200 -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "consoledev=ttyS1\0" \ - "ramdiskaddr=600000\0" \ - "ramdiskfile=your.ramdisk.u-boot\0" \ - "fdtaddr=400000\0" \ - "fdtfile=your.fdt.dtb\0" +#if defined(CONFIG_PCIE1) +#define PCIE_ENV \ + "pciereg=md ${a}000 6; md ${a}020 4; md ${a}bf8 2; echo o;md ${a}c00 25;" \ + "echo i; md ${a}da0 15; echo e;md ${a}e00 e; echo d; md ${a}f00 c\0" \ + "pcieerr=md ${a}020 1; md ${a}e00 e; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \ + "pci d.w $b.0 56 1; pci d $b.0 104 1; pci d $b.0 110 1;" \ + "pci d $b.0 130 1\0" \ + "pcieerrc=mw ${a}020 ffffffff; mw ${a}e00 ffffffff; pci w.b $b.0 7 ff;" \ + "pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff; pci w $b.0 104 ffffffff;"\ + "pci w $b.0 110 ffffffff; pci w $b.0 130 ffffffff\0" \ + "pciecfg=pci d $b.0 0 20; pci d $b.0 100 e; pci d $b.0 400 69\0" \ + "pcie1regs=setenv a e000a; run pciereg\0" \ + "pcie1cfg=setenv b 3; run pciecfg\0" \ + "pcie1err=setenv a e000a; setenv b 3; run pcieerr\0" \ + "pcie1errc=setenv a e000a; setenv b 3; run pcieerrc\0" +#else +#define PCIE_ENV "" +#endif +#if defined(CONFIG_PCI1) || defined(CONFIG_PCI2) +#define PCI_ENV \ + "pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \ + "echo e;md ${a}e00 9\0" \ + "pcierr=md ${a}e00 8; pci d.b $b.0 7 1;pci d.w $b.0 1e 1;" \ + "pci d.w $b.0 56 1\0" \ + "pcierrc=mw ${a}e00 ffffffff; mw ${a}e0c 0; pci w.b $b.0 7 ff;" \ + "pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff\0" +#else +#define PCI_ENV "" +#endif -#define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ +#if defined(CONFIG_PCI1) +#define PCI_ENV1 \ + "pci1regs=setenv a e0008; run pcireg\0" \ + "pci1err=setenv a e0008; setenv b 0; run pcierr\0" \ + "pci1errc=setenv a e0008; setenv b 0; run pcierrc\0" +#else +#define PCI_ENV1 "" +#endif + +#if defined(CONFIG_PCI2) +#define PCI_ENV2 \ + "pci2regs=setenv a e0009; run pcireg\0" \ + "pci2err=setenv a e0009; setenv b 123; run pcierr\0" \ + "pci2errc=setenv a e0009; setenv b 123; run pcierrc\0" +#else +#define PCI_ENV2 "" +#endif + +#if defined(CONFIG_TSEC_ENET) +#define ENET_ENV \ + "enetreg1=md ${a}000 2; md ${a}010 9; md ${a}050 4; md ${a}08c 1;" \ + "md ${a}098 2\0" \ + "enetregt=echo t;md ${a}100 6; md ${a}140 2; md ${a}180 10; md ${a}200 10\0" \ + "enetregr=echo r;md ${a}300 6; md ${a}330 5; md ${a}380 10; md ${a}400 10\0" \ + "enetregm=echo mac;md ${a}500 5; md ${a}520 28;echo fifo;md ${a}a00 1;" \ + "echo mib;md ${a}680 31\0" \ + "enetreg=run enetreg1; run enetregm; run enetregt; run enetregr\0" \ + "enet1regs=setenv a e0024; run enetreg\0" \ + "enet2regs=setenv a e0025; run enetreg\0" \ + "enet3regs=setenv a e0026; run enetreg\0" \ + "enet4regs=setenv a e0027; run enetreg\0" +#else +#define ENET_ENV "" +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ + "tftpflash=tftpboot $loadaddr $uboot; " \ + "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ + "erase " MK_STR(TEXT_BASE) " +$filesize; " \ + "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ + "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ + "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ + "consoledev=ttyS1\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=mpc8548cds\ramdisk.uboot\0" \ + "dtbaddr=c00000\0" \ + "dtbfile=mpc8548cds\mpc8548cds.dtb\0" \ + "eoi=mw e00400b0 0\0" \ + "iack=md e00400a0 1\0" \ + "ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4; md ${a}bf0 4;" \ + "md ${a}e00 3; md ${a}e20 3; md ${a}e40 7; md ${a}f00 5\0" \ + "ddrregs=setenv a e0002; run ddrreg\0" \ + "gureg=md ${a}000 2c; md ${a}0b0 1; md ${a}0c0 1; md ${a}b20 3;" \ + "md ${a}e00 1; md ${a}e60 1; md ${a}ef0 15\0" \ + "guregs=setenv a e00e0; run gureg\0" \ + "ecmreg=md ${a}000 1; md ${a}010 1; md ${a}bf8 2; md ${a}e00 6\0" \ + "ecmregs=setenv a e0001; run ecmreg\0" \ + "lawregs=md e0000c08 4b\0" \ + "lbcregs=md e0005000 36\0" \ + "dma0regs=md e0021100 12\0" \ + "dma1regs=md e0021180 12\0" \ + "dma2regs=md e0021200 12\0" \ + "dma3regs=md e0021280 12\0" \ + PCIE_ENV \ + PCI_ENV \ + PCI_ENV1 \ + PCI_ENV2 \ + ENET_ENV + + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $dtbaddr $dtbfile;" \ + "bootm $loadaddr - $dtbaddr" #define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "bootm $loadaddr $ramdiskaddr" - -#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $dtbaddr $dtbfile;" \ + "bootm $loadaddr $ramdiskaddr $dtbaddr" + +#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND #endif /* __CONFIG_H */ -- cgit v1.3.1 From 6c543597bb4b1ecf5d8589f7abb0f39929fb7fd1 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Mon, 13 Aug 2007 14:38:06 -0500 Subject: Fix minor 85xx warnings Some patches had inserted warnings into the build: * mpc8560ads declared data without using it * cpu_init declared ecm and immap without using it in all CONFIGs * MPC8548CDS.h had its default filenames changed so that they contained "\m" in the paths. Made the defaults not Windows-specific (or anything-specific) Signed-off-by: Andy Fleming --- board/mpc8560ads/mpc8560ads.c | 1 - cpu/mpc85xx/cpu_init.c | 4 +++- include/configs/MPC8548CDS.h | 6 ++++-- 3 files changed, 7 insertions(+), 4 deletions(-) (limited to 'include/configs') diff --git a/board/mpc8560ads/mpc8560ads.c b/board/mpc8560ads/mpc8560ads.c index 41acb97af7e..eef524b45ea 100644 --- a/board/mpc8560ads/mpc8560ads.c +++ b/board/mpc8560ads/mpc8560ads.c @@ -554,7 +554,6 @@ ft_soc_setup(void *blob, bd_t *bd) { u32 *p; int len; - ulong data; p = ft_get_prop(blob, "/" OF_SOC "/cpm@e0000000/brg-frequency", &len); diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c index 888417f864b..c7fe130ee0e 100644 --- a/cpu/mpc85xx/cpu_init.c +++ b/cpu/mpc85xx/cpu_init.c @@ -194,10 +194,12 @@ void cpu_init_f (void) int cpu_init_r(void) { +#if defined(CONFIG_CLEAR_LAW0) || defined(CONFIG_L2_CACHE) volatile immap_t *immap = (immap_t *)CFG_IMMR; +#endif +#ifdef CONFIG_CLEAR_LAW0 volatile ccsr_local_ecm_t *ecm = &immap->im_local_ecm; -#ifdef CONFIG_CLEAR_LAW0 /* clear alternate boot location LAW (used for sdram, or ddr bank) */ ecm->lawar0 = 0; #endif diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index d7afdbd606f..dfe4f5b7a1b 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -623,6 +623,7 @@ extern unsigned long get_clock_freq(void); #define ENET_ENV "" #endif +#if 0 #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ @@ -634,9 +635,9 @@ extern unsigned long get_clock_freq(void); "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ "consoledev=ttyS1\0" \ "ramdiskaddr=2000000\0" \ - "ramdiskfile=mpc8548cds\ramdisk.uboot\0" \ + "ramdiskfile=ramdisk.uboot\0" \ "dtbaddr=c00000\0" \ - "dtbfile=mpc8548cds\mpc8548cds.dtb\0" \ + "dtbfile=mpc8548cds.dtb\0" \ "eoi=mw e00400b0 0\0" \ "iack=md e00400a0 1\0" \ "ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4; md ${a}bf0 4;" \ @@ -658,6 +659,7 @@ extern unsigned long get_clock_freq(void); PCI_ENV1 \ PCI_ENV2 \ ENET_ENV +#endif #define CONFIG_NFSBOOTCOMMAND \ -- cgit v1.3.1 From c59e4091ffe0148398b9e9ff14a019ea038b7432 Mon Sep 17 00:00:00 2001 From: Haiying Wang Date: Tue, 19 Jun 2007 14:18:34 -0400 Subject: Add PCI support for MPC8568MDS board This patch is against u-boot-mpc85xx.git of www.denx.com Signed-off-by: Haiying Wang Signed-off-by: Ebony Zhu --- board/mpc8568mds/init.S | 48 +++++++++++++--------------------- board/mpc8568mds/mpc8568mds.c | 60 ++++++++++++++++++++++++++++++++++++++++--- include/asm-ppc/immap_85xx.h | 17 ++++++++++++ include/configs/MPC8568MDS.h | 11 +++++--- 4 files changed, 98 insertions(+), 38 deletions(-) (limited to 'include/configs') diff --git a/board/mpc8568mds/init.S b/board/mpc8568mds/init.S index 0d879821e33..972a7d42990 100644 --- a/board/mpc8568mds/init.S +++ b/board/mpc8568mds/init.S @@ -143,54 +143,42 @@ tlb1_entry: .long TLB1_MAS3(E500_TLB_RPN(CFG_FLASH_BASE), 0,0,0,0,0,1,0,1,0,1) /* - * TLBe 2: 256M Non-cacheable, guarded - * 0x80000000 256M PCI1 MEM + * TLBe 2: 1G Non-cacheable, guarded + * 0x80000000 512M PCI1 MEM + * 0xa0000000 512M PCIe MEM */ .long TLB1_MAS0(1, 2, 0) - .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) + .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1G) .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE), 0,0,0,0,1,0,1,0) .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE), 0,0,0,0,0,1,0,1,0,1) /* - * TLBe 3: 256M Non-cacheable, guarded - * 0xa0000000 256M PCIe Mem - */ - .long TLB1_MAS0(1, 3, 0) - .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) - .long TLB1_MAS2(E500_TLB_EPN(CFG_PEX_MEM_BASE), 0,0,0,0,1,0,1,0) - .long TLB1_MAS3(E500_TLB_RPN(CFG_PEX_MEM_BASE), 0,0,0,0,0,1,0,1,0,1) - - /* - * TLBe 4: Reserved for future usage - */ - - /* - * TLBe 5: 64M Non-cacheable, guarded + * TLBe 3: 64M Non-cacheable, guarded * 0xe000_0000 1M CCSRBAR * 0xe200_0000 8M PCI1 IO * 0xe280_0000 8M PCIe IO */ - .long TLB1_MAS0(1, 5, 0) + .long TLB1_MAS0(1, 3, 0) .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0) .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1) /* - * TLBe 6: 64M Cacheable, non-guarded + * TLBe 4: 64M Cacheable, non-guarded * 0xf000_0000 64M LBC SDRAM */ - .long TLB1_MAS0(1, 6, 0) + .long TLB1_MAS0(1, 4, 0) .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) .long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,0,0,0) .long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1) /* - * TLBe 7: 256K Non-cacheable, guarded + * TLBe 5: 256K Non-cacheable, guarded * 0xf8000000 32K BCSR * 0xf8008000 32K PIB (CS4) * 0xf8010000 32K PIB (CS5) */ - .long TLB1_MAS0(1, 7, 0) + .long TLB1_MAS0(1, 5, 0) .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256K) .long TLB1_MAS2(E500_TLB_EPN(CFG_BCSR_BASE), 0,0,0,0,1,0,1,0) .long TLB1_MAS3(E500_TLB_RPN(CFG_BCSR_BASE), 0,0,0,0,0,1,0,1,0,1) @@ -202,12 +190,12 @@ tlb1_entry: * LAW(Local Access Window) configuration: * *0) 0x0000_0000 0x7fff_ffff DDR 2G - *1) 0x8000_0000 0x9fff_ffff PCI1 MEM 256MB - *2) 0xa000_0000 0xbfff_ffff PCIe MEM 256MB - *5) 0xc000_0000 0xdfff_ffff SRIO 256MB + *1) 0x8000_0000 0x9fff_ffff PCI1 MEM 512MB + *2) 0xa000_0000 0xbfff_ffff PCIe MEM 512MB *-) 0xe000_0000 0xe00f_ffff CCSR 1M *3) 0xe200_0000 0xe27f_ffff PCI1 I/O 8M - *4) 0xe280_0000 0xe2ff_ffff PCIe I/0 8M + *4) 0xe280_0000 0xe2ff_ffff PCIe I/O 8M + *5) 0xc000_0000 0xdfff_ffff SRIO 512MB *6.a) 0xf000_0000 0xf3ff_ffff SDRAM 64MB *6.b) 0xf800_0000 0xf800_7fff BCSR 32KB *6.c) 0xf800_8000 0xf800_ffff PIB (CS4) 32KB @@ -226,20 +214,20 @@ tlb1_entry: #define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN) #define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff) -#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_256M)) +#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M)) #define LAWBAR2 ((CFG_PEX_MEM_BASE>>12) & 0xfffff) -#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_PEX | (LAWAR_SIZE & LAWAR_SIZE_256M)) +#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_PEX | (LAWAR_SIZE & LAWAR_SIZE_512M)) #define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff) #define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_8M)) #define LAWBAR4 ((CFG_PEX_IO_PHYS>>12) & 0xfffff) -#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_PEX | (LAWAR_SIZE & LAWAR_SIZE_16M)) +#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_PEX | (LAWAR_SIZE & LAWAR_SIZE_8M)) #define LAWBAR5 ((CFG_SRIO_MEM_BASE>>12) & 0xfffff) -#define LAWAR5 (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_256M)) +#define LAWAR5 (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M)) /* LBC window - maps 256M. That's SDRAM, BCSR, PIBs, and Flash */ #define LAWBAR6 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff) diff --git a/board/mpc8568mds/mpc8568mds.c b/board/mpc8568mds/mpc8568mds.c index 9c7960d47e7..23caaec72f2 100644 --- a/board/mpc8568mds/mpc8568mds.c +++ b/board/mpc8568mds/mpc8568mds.c @@ -27,6 +27,7 @@ #include #include #include +#include #include "bcsr.h" @@ -50,6 +51,15 @@ int board_early_init_f (void) enable_8568mds_duart(); enable_8568mds_flash_write(); +#ifdef CFG_I2C2_OFFSET + /* Enable I2C2_SCL and I2C2_SDA */ + volatile struct par_io *port_c; + port_c = (struct par_io*)(CFG_IMMR + 0xe0140); + port_c->cpdir2 |= 0x0f000000; + port_c->cppar2 &= ~0x0f000000; + port_c->cppar2 |= 0x0a000000; +#endif + return 0; } @@ -269,20 +279,62 @@ static struct pci_config_table pci_mpc8568mds_config_table[] = { #endif static struct pci_controller hose[] = { + { #ifndef CONFIG_PCI_PNP - { config_table: pci_mpc8568mds_config_table,}, -#endif -#ifdef CONFIG_MPC85XX_PCI2 - {}, + config_table: pci_mpc8568mds_config_table, #endif + } }; #endif /* CONFIG_PCI */ +/* + * pib_init() -- Initialize the PCA9555 IO expander on the PIB board + */ +void +pib_init(void) +{ + u8 val8, orig_i2c_bus; + /* + * Assign PIB PMC2/3 to PCI bus + */ + + /*switch temporarily to I2C bus #2 */ + orig_i2c_bus = i2c_get_bus_num(); + i2c_set_bus_num(1); + + val8 = 0x00; + i2c_write(0x23, 0x6, 1, &val8, 1); + i2c_write(0x23, 0x7, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x23, 0x2, 1, &val8, 1); + i2c_write(0x23, 0x3, 1, &val8, 1); + + val8 = 0x00; + i2c_write(0x26, 0x6, 1, &val8, 1); + val8 = 0x34; + i2c_write(0x26, 0x7, 1, &val8, 1); + val8 = 0xf9; + i2c_write(0x26, 0x2, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x26, 0x3, 1, &val8, 1); + + val8 = 0x00; + i2c_write(0x27, 0x6, 1, &val8, 1); + i2c_write(0x27, 0x7, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x27, 0x2, 1, &val8, 1); + val8 = 0xef; + i2c_write(0x27, 0x3, 1, &val8, 1); + + asm("eieio"); +} + void pci_init_board(void) { #ifdef CONFIG_PCI + pib_init(); pci_mpc85xx_init(&hose); #endif } diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h index 77f885daa67..3d4816f3a99 100644 --- a/include/asm-ppc/immap_85xx.h +++ b/include/asm-ppc/immap_85xx.h @@ -1522,6 +1522,17 @@ typedef struct ccsr_rio { char res58[60176]; } ccsr_rio_t; +/* Quick Engine Block Pin Muxing Registers (0xe_0100 - 0xe_01bf) */ +typedef struct par_io { + uint cpodr; /* 0x100 */ + uint cpdat; /* 0x104 */ + uint cpdir1; /* 0x108 */ + uint cpdir2; /* 0x10c */ + uint cppar1; /* 0x110 */ + uint cppar2; /* 0x114 */ + char res[8]; +}par_io_t; + /* * Global Utilities Register Block(0xe_0000-0xf_ffff) */ @@ -1585,7 +1596,13 @@ typedef struct ccsr_gur { uint svr; /* 0xe00a4 - System version register */ char res10a[8]; uint rstcr; /* 0xe00b0 - Reset control register */ +#ifdef MPC8568 + char res10b[76]; + par_io_t qe_par_io[7]; /* 0xe0100 - 0xe01bf */ + char res10c[3136]; +#else char res10b[3404]; +#endif uint clkocr; /* 0xe0e00 - Clock out select register */ char res11[12]; uint ddrdllcr; /* 0xe0e10 - DDR DLL control register */ diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index eef168c252d..5bc953adc42 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -33,7 +33,7 @@ #define CONFIG_MPC8568 1 /* MPC8568 specific */ #define CONFIG_MPC8568MDS 1 /* MPC8568MDS board specific */ -#undef CONFIG_PCI +#define CONFIG_PCI #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ @@ -306,11 +306,14 @@ extern unsigned long get_clock_freq(void); #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ #define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_CMD_TREE #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CFG_I2C_EEPROM_ADDR 0x57 +#define CFG_I2C_EEPROM_ADDR 0x52 #define CFG_I2C_SLAVE 0x7F -#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_NOPROBES {0,0x69} /* Don't probe these addrs */ #define CFG_I2C_OFFSET 0x3000 +#define CFG_I2C2_OFFSET 0x3100 /* * General PCI @@ -318,7 +321,7 @@ extern unsigned long get_clock_freq(void); */ #define CFG_PCI1_MEM_BASE 0x80000000 #define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE -#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ #define CFG_PCI1_IO_BASE 0x00000000 #define CFG_PCI1_IO_PHYS 0xe2000000 #define CFG_PCI1_IO_SIZE 0x00800000 /* 8M */ -- cgit v1.3.1 From da9d4610d76e52c4d20a8f3d8433439a7fcf5b71 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Tue, 14 Aug 2007 00:14:25 -0500 Subject: Add support for UEC to 8568 Signed-off-by: Haiying Wang Signed-off-by: Andy Fleming --- Makefile | 3 ++ board/mpc8568mds/bcsr.c | 7 ++++ board/mpc8568mds/bcsr.h | 1 + board/mpc8568mds/mpc8568mds.c | 61 ++++++++++++++++++++++++++++++- cpu/mpc85xx/Makefile | 2 +- cpu/mpc85xx/cpu.c | 24 +++++++++++- cpu/mpc85xx/cpu_init.c | 33 +++++++++++++++++ cpu/mpc85xx/qe_io.c | 85 +++++++++++++++++++++++++++++++++++++++++++ drivers/qe/uec.c | 27 +++++++++----- drivers/qe/uec.h | 1 + drivers/qe/uec_phy.c | 14 +++---- drivers/qe/uec_phy.h | 6 +-- include/asm-ppc/global_data.h | 8 ++-- include/asm-ppc/immap_qe.h | 20 +++++++++- include/configs/MPC8568MDS.h | 56 ++++++++++++++++++++++++---- 15 files changed, 313 insertions(+), 35 deletions(-) create mode 100644 cpu/mpc85xx/qe_io.c (limited to 'include/configs') diff --git a/Makefile b/Makefile index f51688961b3..a5698cf7c95 100644 --- a/Makefile +++ b/Makefile @@ -212,6 +212,9 @@ LIBS += drivers/nand_legacy/libnand_legacy.a ifeq ($(CPU),mpc83xx) LIBS += drivers/qe/qe.a endif +ifeq ($(CPU),mpc85xx) +LIBS += drivers/qe/qe.a +endif LIBS += drivers/sk98lin/libsk98lin.a LIBS += post/libpost.a post/drivers/libpostdrivers.a LIBS += $(shell if [ -d post/lib_$(ARCH) ]; then echo \ diff --git a/board/mpc8568mds/bcsr.c b/board/mpc8568mds/bcsr.c index 2e2e8cd18fa..aae0f98e038 100644 --- a/board/mpc8568mds/bcsr.c +++ b/board/mpc8568mds/bcsr.c @@ -47,3 +47,10 @@ void disable_8568mds_flash_write() bcsr[9] &= ~(0x01); } + +void enable_8568mds_qe_mdio() +{ + u8 *bcsr = (u8 *)(CFG_BCSR); + + bcsr[7] |= 0x01; +} diff --git a/board/mpc8568mds/bcsr.h b/board/mpc8568mds/bcsr.h index 8d4cb2f1412..aefd9bf54d3 100644 --- a/board/mpc8568mds/bcsr.h +++ b/board/mpc8568mds/bcsr.h @@ -95,5 +95,6 @@ void enable_8568mds_duart(void); void enable_8568mds_flash_write(void); void disable_8568mds_flash_write(void); +void enable_8568mds_qe_mdio(void); #endif /* __BCSR_H_ */ diff --git a/board/mpc8568mds/mpc8568mds.c b/board/mpc8568mds/mpc8568mds.c index 23caaec72f2..818ff138a99 100644 --- a/board/mpc8568mds/mpc8568mds.c +++ b/board/mpc8568mds/mpc8568mds.c @@ -28,9 +28,65 @@ #include #include #include +#include #include "bcsr.h" +const qe_iop_conf_t qe_iop_conf_tab[] = { + /* GETH1 */ + {4, 10, 1, 0, 2}, /* TxD0 */ + {4, 9, 1, 0, 2}, /* TxD1 */ + {4, 8, 1, 0, 2}, /* TxD2 */ + {4, 7, 1, 0, 2}, /* TxD3 */ + {4, 23, 1, 0, 2}, /* TxD4 */ + {4, 22, 1, 0, 2}, /* TxD5 */ + {4, 21, 1, 0, 2}, /* TxD6 */ + {4, 20, 1, 0, 2}, /* TxD7 */ + {4, 15, 2, 0, 2}, /* RxD0 */ + {4, 14, 2, 0, 2}, /* RxD1 */ + {4, 13, 2, 0, 2}, /* RxD2 */ + {4, 12, 2, 0, 2}, /* RxD3 */ + {4, 29, 2, 0, 2}, /* RxD4 */ + {4, 28, 2, 0, 2}, /* RxD5 */ + {4, 27, 2, 0, 2}, /* RxD6 */ + {4, 26, 2, 0, 2}, /* RxD7 */ + {4, 11, 1, 0, 2}, /* TX_EN */ + {4, 24, 1, 0, 2}, /* TX_ER */ + {4, 16, 2, 0, 2}, /* RX_DV */ + {4, 30, 2, 0, 2}, /* RX_ER */ + {4, 17, 2, 0, 2}, /* RX_CLK */ + {4, 19, 1, 0, 2}, /* GTX_CLK */ + {1, 31, 2, 0, 3}, /* GTX125 */ + + /* GETH2 */ + {5, 10, 1, 0, 2}, /* TxD0 */ + {5, 9, 1, 0, 2}, /* TxD1 */ + {5, 8, 1, 0, 2}, /* TxD2 */ + {5, 7, 1, 0, 2}, /* TxD3 */ + {5, 23, 1, 0, 2}, /* TxD4 */ + {5, 22, 1, 0, 2}, /* TxD5 */ + {5, 21, 1, 0, 2}, /* TxD6 */ + {5, 20, 1, 0, 2}, /* TxD7 */ + {5, 15, 2, 0, 2}, /* RxD0 */ + {5, 14, 2, 0, 2}, /* RxD1 */ + {5, 13, 2, 0, 2}, /* RxD2 */ + {5, 12, 2, 0, 2}, /* RxD3 */ + {5, 29, 2, 0, 2}, /* RxD4 */ + {5, 28, 2, 0, 2}, /* RxD5 */ + {5, 27, 2, 0, 3}, /* RxD6 */ + {5, 26, 2, 0, 2}, /* RxD7 */ + {5, 11, 1, 0, 2}, /* TX_EN */ + {5, 24, 1, 0, 2}, /* TX_ER */ + {5, 16, 2, 0, 2}, /* RX_DV */ + {5, 30, 2, 0, 2}, /* RX_ER */ + {5, 17, 2, 0, 2}, /* RX_CLK */ + {5, 19, 1, 0, 2}, /* GTX_CLK */ + {1, 31, 2, 0, 3}, /* GTX125 */ + {4, 6, 3, 0, 2}, /* MDIO */ + {4, 5, 1, 0, 2}, /* MDC */ + {0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */ +}; + #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) extern void ddr_enable_ecc(unsigned int dram_size); @@ -50,6 +106,9 @@ int board_early_init_f (void) enable_8568mds_duart(); enable_8568mds_flash_write(); +#if defined(CONFIG_QE) && !defined(CONFIG_eTSEC_MDIO_BUS) + enable_8568mds_qe_mdio(); +#endif #ifdef CFG_I2C2_OFFSET /* Enable I2C2_SCL and I2C2_SDA */ @@ -335,6 +394,6 @@ pci_init_board(void) { #ifdef CONFIG_PCI pib_init(); - pci_mpc85xx_init(&hose); + pci_mpc85xx_init(hose); #endif } diff --git a/cpu/mpc85xx/Makefile b/cpu/mpc85xx/Makefile index ff67dcdd353..32091fa4e1d 100644 --- a/cpu/mpc85xx/Makefile +++ b/cpu/mpc85xx/Makefile @@ -30,7 +30,7 @@ LIB = $(obj)lib$(CPU).a START = start.o resetvec.o COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o \ - pci.o serial_scc.o commproc.o ether_fcc.o spd_sdram.o + pci.o serial_scc.o commproc.o ether_fcc.o spd_sdram.o qe_io.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c index 1d791c9b9b3..08e04685f59 100644 --- a/cpu/mpc85xx/cpu.c +++ b/cpu/mpc85xx/cpu.c @@ -280,7 +280,7 @@ ft_cpu_setup(void *blob, bd_t *bd) if (p != NULL) *p = cpu_to_be32(clock); -#if defined(CONFIG_TSEC1) +#if defined(CONFIG_HAS_ETH0) p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/mac-address", &len); if (p) memcpy(p, bd->bi_enetaddr, 6); @@ -308,6 +308,17 @@ ft_cpu_setup(void *blob, bd_t *bd) p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/local-mac-address", &len); if (p) memcpy(p, bd->bi_enet2addr, 6); + +#ifdef CONFIG_UEC_ETH + p = ft_get_prop(blob, "/" OF_QE "/ucc@2000/mac-address", &len); + if (p) + memcpy(p, bd->bi_enet2addr, 6); + + p = ft_get_prop(blob, "/" OF_QE "/ucc@2000/local-mac-address", &len); + if (p) + memcpy(p, bd->bi_enet2addr, 6); + +#endif #endif #if defined(CONFIG_HAS_ETH3) @@ -318,6 +329,17 @@ ft_cpu_setup(void *blob, bd_t *bd) p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/local-mac-address", &len); if (p) memcpy(p, bd->bi_enet3addr, 6); + +#ifdef CONFIG_UEC_ETH + p = ft_get_prop(blob, "/" OF_QE "/ucc@3000/mac-address", &len); + if (p) + memcpy(p, bd->bi_enet3addr, 6); + + p = ft_get_prop(blob, "/" OF_QE "/ucc@3000/local-mac-address", &len); + if (p) + memcpy(p, bd->bi_enet3addr, 6); + +#endif #endif } diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c index c7fe130ee0e..7b9961013c0 100644 --- a/cpu/mpc85xx/cpu_init.c +++ b/cpu/mpc85xx/cpu_init.c @@ -34,6 +34,29 @@ DECLARE_GLOBAL_DATA_PTR; +#ifdef CONFIG_QE +extern qe_iop_conf_t qe_iop_conf_tab[]; +extern void qe_config_iopin(u8 port, u8 pin, int dir, + int open_drain, int assign); +extern void qe_init(uint qe_base); +extern void qe_reset(void); + +static void config_qe_ioports(void) +{ + u8 port, pin; + int dir, open_drain, assign; + int i; + + for (i = 0; qe_iop_conf_tab[i].assign != QE_IOP_TAB_END; i++) { + port = qe_iop_conf_tab[i].port; + pin = qe_iop_conf_tab[i].pin; + dir = qe_iop_conf_tab[i].dir; + open_drain = qe_iop_conf_tab[i].open_drain; + assign = qe_iop_conf_tab[i].assign; + qe_config_iopin(port, pin, dir, open_drain, assign); + } +} +#endif #ifdef CONFIG_CPM2 static void config_8560_ioports (volatile immap_t * immr) @@ -181,6 +204,11 @@ void cpu_init_f (void) #if defined(CONFIG_CPM2) m8560_cpm_reset(); #endif +#ifdef CONFIG_QE + /* Config QE ioports */ + config_qe_ioports(); +#endif + } @@ -262,6 +290,11 @@ int cpu_init_r(void) #else printf("L2 cache: disabled\n"); #endif +#ifdef CONFIG_QE + uint qe_base = CFG_IMMR + 0x00080000; /* QE immr base */ + qe_init(qe_base); + qe_reset(); +#endif return 0; } diff --git a/cpu/mpc85xx/qe_io.c b/cpu/mpc85xx/qe_io.c new file mode 100644 index 00000000000..8878bc53193 --- /dev/null +++ b/cpu/mpc85xx/qe_io.c @@ -0,0 +1,85 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * + * Dave Liu + * based on source code of Shlomi Gridish + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include "common.h" +#include "asm/errno.h" +#include "asm/io.h" +#include "asm/immap_85xx.h" + +#if defined(CONFIG_QE) +#define NUM_OF_PINS 32 +void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign) +{ + u32 pin_2bit_mask; + u32 pin_2bit_dir; + u32 pin_2bit_assign; + u32 pin_1bit_mask; + u32 tmp_val; + volatile immap_t *im = (volatile immap_t *)CFG_IMMR; + volatile par_io_t *par_io = (volatile par_io_t *) + &(im->im_gur.qe_par_io); + + /* Caculate pin location and 2bit mask and dir */ + pin_2bit_mask = (u32)(0x3 << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2)); + pin_2bit_dir = (u32)(dir << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2)); + + /* Setup the direction */ + tmp_val = (pin > (NUM_OF_PINS/2) - 1) ? \ + in_be32(&par_io[port].cpdir2) : + in_be32(&par_io[port].cpdir1); + + if (pin > (NUM_OF_PINS/2) -1) { + out_be32(&par_io[port].cpdir2, ~pin_2bit_mask & tmp_val); + out_be32(&par_io[port].cpdir2, pin_2bit_dir | tmp_val); + } else { + out_be32(&par_io[port].cpdir1, ~pin_2bit_mask & tmp_val); + out_be32(&par_io[port].cpdir1, pin_2bit_dir | tmp_val); + } + + /* Calculate pin location for 1bit mask */ + pin_1bit_mask = (u32)(1 << (NUM_OF_PINS - (pin+1))); + + /* Setup the open drain */ + tmp_val = in_be32(&par_io[port].cpodr); + if (open_drain) + out_be32(&par_io[port].cpodr, pin_1bit_mask | tmp_val); + else + out_be32(&par_io[port].cpodr, ~pin_1bit_mask & tmp_val); + + /* Setup the assignment */ + tmp_val = (pin > (NUM_OF_PINS/2) - 1) ? + in_be32(&par_io[port].cppar2): + in_be32(&par_io[port].cppar1); + pin_2bit_assign = (u32)(assign + << (NUM_OF_PINS - (pin%(NUM_OF_PINS/2)+1)*2)); + + /* Clear and set 2 bits mask */ + if (pin > (NUM_OF_PINS/2) - 1) { + out_be32(&par_io[port].cppar2, ~pin_2bit_mask & tmp_val); + out_be32(&par_io[port].cppar2, pin_2bit_assign | tmp_val); + } else { + out_be32(&par_io[port].cppar1, ~pin_2bit_mask & tmp_val); + out_be32(&par_io[port].cppar1, pin_2bit_assign | tmp_val); + } +} + +#endif /* CONFIG_QE */ diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c index c416a67c832..89a72798232 100644 --- a/drivers/qe/uec.c +++ b/drivers/qe/uec.c @@ -391,17 +391,17 @@ static int uec_set_mac_if_mode(uec_private_t *uec, enet_interface_e if_mode) return 0; } -static int init_mii_management_configuration(uec_t *uec_regs) +static int init_mii_management_configuration(uec_mii_t *uec_mii_regs) { uint timeout = 0x1000; u32 miimcfg = 0; - miimcfg = in_be32(&uec_regs->miimcfg); + miimcfg = in_be32(&uec_mii_regs->miimcfg); miimcfg |= MIIMCFG_MNGMNT_CLC_DIV_INIT_VALUE; - out_be32(&uec_regs->miimcfg, miimcfg); + out_be32(&uec_mii_regs->miimcfg, miimcfg); /* Wait until the bus is free */ - while ((in_be32(&uec_regs->miimcfg) & MIIMIND_BUSY) && timeout--); + while ((in_be32(&uec_mii_regs->miimcfg) & MIIMIND_BUSY) && timeout--); if (timeout <= 0) { printf("%s: The MII Bus is stuck!", __FUNCTION__); return -ETIMEDOUT; @@ -413,13 +413,13 @@ static int init_mii_management_configuration(uec_t *uec_regs) static int init_phy(struct eth_device *dev) { uec_private_t *uec; - uec_t *uec_regs; + uec_mii_t *umii_regs; struct uec_mii_info *mii_info; struct phy_info *curphy; int err; uec = (uec_private_t *)dev->priv; - uec_regs = uec->uec_regs; + umii_regs = uec->uec_mii_regs; uec->oldlink = 0; uec->oldspeed = 0; @@ -451,19 +451,19 @@ static int init_phy(struct eth_device *dev) mii_info->mii_id = uec->uec_info->phy_address; mii_info->dev = dev; - mii_info->mdio_read = &read_phy_reg; - mii_info->mdio_write = &write_phy_reg; + mii_info->mdio_read = &uec_read_phy_reg; + mii_info->mdio_write = &uec_write_phy_reg; uec->mii_info = mii_info; - if (init_mii_management_configuration(uec_regs)) { + if (init_mii_management_configuration(umii_regs)) { printf("%s: The MII Bus is stuck!", dev->name); err = -1; goto bus_fail; } /* get info for this PHY */ - curphy = get_phy_info(uec->mii_info); + curphy = uec_get_phy_info(uec->mii_info); if (!curphy) { printf("%s: No PHY found", dev->name); err = -1; @@ -989,6 +989,13 @@ static int uec_startup(uec_private_t *uec) /* Setup MAC interface mode */ uec_set_mac_if_mode(uec, uec_info->enet_interface); + /* Setup MII management base */ +#ifndef CONFIG_eTSEC_MDIO_BUS + uec->uec_mii_regs = (uec_mii_t *)(&uec_regs->miimcfg); +#else + uec->uec_mii_regs = (uec_mii_t *) CONFIG_MIIM_ADDRESS; +#endif + /* Setup MII master clock source */ qe_set_mii_clk_src(uec_info->uf_info.ucc_num); diff --git a/drivers/qe/uec.h b/drivers/qe/uec.h index 04950264b89..c384055cebf 100644 --- a/drivers/qe/uec.h +++ b/drivers/qe/uec.h @@ -675,6 +675,7 @@ typedef struct uec_private { ucc_fast_private_t *uccf; struct eth_device *dev; uec_t *uec_regs; + uec_mii_t *uec_mii_regs; /* enet init command parameter */ uec_init_cmd_pram_t *p_init_enet_param; u32 init_enet_param_offset; diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c index 76fd38896a8..ca6faa6ef4e 100644 --- a/drivers/qe/uec_phy.c +++ b/drivers/qe/uec_phy.c @@ -60,14 +60,14 @@ void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val); /* Write value to the PHY for this device to the register at regnum, */ /* waiting until the write is done before it returns. All PHY */ /* configuration has to be done through the TSEC1 MIIM regs */ -void write_phy_reg (struct eth_device *dev, int mii_id, int regnum, int value) +void uec_write_phy_reg (struct eth_device *dev, int mii_id, int regnum, int value) { uec_private_t *ugeth = (uec_private_t *) dev->priv; - uec_t *ug_regs; + uec_mii_t *ug_regs; enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e) regnum; u32 tmp_reg; - ug_regs = ugeth->uec_regs; + ug_regs = ugeth->uec_mii_regs; /* Stop the MII management read cycle */ out_be32 (&ug_regs->miimcom, 0); @@ -87,15 +87,15 @@ void write_phy_reg (struct eth_device *dev, int mii_id, int regnum, int value) /* Reads from register regnum in the PHY for device dev, */ /* returning the value. Clears miimcom first. All PHY */ /* configuration has to be done through the TSEC1 MIIM regs */ -int read_phy_reg (struct eth_device *dev, int mii_id, int regnum) +int uec_read_phy_reg (struct eth_device *dev, int mii_id, int regnum) { uec_private_t *ugeth = (uec_private_t *) dev->priv; - uec_t *ug_regs; + uec_mii_t *ug_regs; enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e) regnum; u32 tmp_reg; u16 value; - ug_regs = ugeth->uec_regs; + ug_regs = ugeth->uec_mii_regs; /* Setting up the MII Mangement Address Register */ tmp_reg = ((u32) mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg; @@ -521,7 +521,7 @@ void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val) /* Use the PHY ID registers to determine what type of PHY is attached * to device dev. return a struct phy_info structure describing that PHY */ -struct phy_info *get_phy_info (struct uec_mii_info *mii_info) +struct phy_info *uec_get_phy_info (struct uec_mii_info *mii_info) { u16 phy_reg; u32 phy_ID; diff --git a/drivers/qe/uec_phy.h b/drivers/qe/uec_phy.h index 9bd926ddd5a..e59a940e0dd 100644 --- a/drivers/qe/uec_phy.h +++ b/drivers/qe/uec_phy.h @@ -249,10 +249,10 @@ struct phy_info { void (*close) (struct uec_mii_info * mii_info); }; -struct phy_info *get_phy_info (struct uec_mii_info *mii_info); -void write_phy_reg (struct eth_device *dev, int mii_id, int regnum, +struct phy_info *uec_get_phy_info (struct uec_mii_info *mii_info); +void uec_write_phy_reg (struct eth_device *dev, int mii_id, int regnum, int value); -int read_phy_reg (struct eth_device *dev, int mii_id, int regnum); +int uec_read_phy_reg (struct eth_device *dev, int mii_id, int regnum); void mii_clear_phy_interrupt (struct uec_mii_info *mii_info); void mii_configure_phy_interrupt (struct uec_mii_info *mii_info, u32 interrupts); diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h index bbaeb3f575f..1f1583a9231 100644 --- a/include/asm-ppc/global_data.h +++ b/include/asm-ppc/global_data.h @@ -71,16 +71,16 @@ typedef struct global_data { u32 lclk_clk; u32 ddr_clk; u32 pci_clk; +#if defined(CONFIG_MPC8360) + u32 ddr_sec_clk; +#endif /* CONFIG_MPC8360 */ +#endif #if defined(CONFIG_QE) u32 qe_clk; u32 brg_clk; uint mp_alloc_base; uint mp_alloc_top; #endif /* CONFIG_QE */ -#if defined (CONFIG_MPC8360) - u32 ddr_sec_clk; -#endif /* CONFIG_MPC8360 */ -#endif #if defined(CONFIG_MPC5xxx) unsigned long ipb_clk; unsigned long pci_clk; diff --git a/include/asm-ppc/immap_qe.h b/include/asm-ppc/immap_qe.h index 950b9497f8a..a16a6d3fc5f 100644 --- a/include/asm-ppc/immap_qe.h +++ b/include/asm-ppc/immap_qe.h @@ -281,6 +281,17 @@ typedef struct ucc_slow { u8 res4[0x200 - 0x091]; } __attribute__ ((packed)) ucc_slow_t; +typedef struct ucc_mii_mng { + u32 miimcfg; /* MII management configuration reg */ + u32 miimcom; /* MII management command reg */ + u32 miimadd; /* MII management address reg */ + u32 miimcon; /* MII management control reg */ + u32 miimstat; /* MII management status reg */ + u32 miimind; /* MII management indication reg */ + u32 ifctl; /* interface control reg */ + u32 ifstat; /* interface statux reg */ +} __attribute__ ((packed))uec_mii_t; + typedef struct ucc_ethernet { u32 maccfg1; /* mac configuration reg. 1 */ u32 maccfg2; /* mac configuration reg. 2 */ @@ -540,14 +551,21 @@ typedef struct qe_immap { u8 res14[0x300]; u8 res15[0x3A00]; u8 res16[0x8000]; /* 0x108000 - 0x110000 */ +#if defined(CONFIG_MPC8568) + u8 muram[0x10000]; /* 0x1_0000 - 0x2_0000 Multi-user RAM */ + u8 res17[0x20000]; /* 0x2_0000 - 0x4_0000 */ +#else u8 muram[0xC000]; /* 0x110000 - 0x11C000 Multi-user RAM */ u8 res17[0x24000]; /* 0x11C000 - 0x140000 */ u8 res18[0xC0000]; /* 0x140000 - 0x200000 */ +#endif } __attribute__ ((packed)) qe_map_t; extern qe_map_t *qe_immr; -#if defined(CONFIG_MPC8360) +#if defined(CONFIG_MPC8568) +#define QE_MURAM_SIZE 0x10000UL +#elif defined(CONFIG_MPC8360) #define QE_MURAM_SIZE 0xc000UL #elif defined(CONFIG_MPC832X) #define QE_MURAM_SIZE 0x4000UL diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 5bc953adc42..dc9cb1ff545 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -28,20 +28,21 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ -#define CONFIG_E500 1 /* BOOKE e500 family */ +#define CONFIG_E500 1 /* BOOKE e500 family */ #define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48/68 */ #define CONFIG_MPC8568 1 /* MPC8568 specific */ #define CONFIG_MPC8568MDS 1 /* MPC8568MDS board specific */ #define CONFIG_PCI #define CONFIG_TSEC_ENET /* tsec ethernet support */ +#undef CONFIG_QE /* Enable QE */ #define CONFIG_ENV_OVERWRITE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #define CONFIG_DDR_DLL /* possible DLL fix needed */ /*#define CONFIG_DDR_2T_TIMING Sets the 2T timing bit */ /*#define CONFIG_DDR_ECC*/ /* only for ECC DDR module */ -/*#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER*/ /* DDR controller or DMA? */ +/*#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER*/ /* DDR controller or DMA? */ #define CONFIG_MEM_INIT_VALUE 0xDeadBeef @@ -297,6 +298,7 @@ extern unsigned long get_clock_freq(void); #define OF_CPU "PowerPC,8568@0" #define OF_SOC "soc8568@e0000000" +#define OF_QE "qe@e0080000" #define OF_TBCLK (bd->bi_busfreq / 8) #define OF_STDOUT_PATH "/soc8568@e0000000/serial@4600" @@ -311,7 +313,7 @@ extern unsigned long get_clock_freq(void); #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_EEPROM_ADDR 0x52 #define CFG_I2C_SLAVE 0x7F -#define CFG_I2C_NOPROBES {0,0x69} /* Don't probe these addrs */ +#define CFG_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */ #define CFG_I2C_OFFSET 0x3000 #define CFG_I2C2_OFFSET 0x3100 @@ -340,6 +342,44 @@ extern unsigned long get_clock_freq(void); #define CONFIG_NET_MULTI #define CONFIG_PCI_PNP /* do pci plug-and-play */ +#ifdef CONFIG_QE +/* + * QE UEC ethernet configuration + */ +#define CONFIG_UEC_ETH +#ifndef CONFIG_TSEC_ENET +#define CONFIG_ETHPRIME "Freescale GETH" +#endif +#define CONFIG_PHY_MODE_NEED_CHANGE +#define CONFIG_eTSEC_MDIO_BUS + +#ifdef CONFIG_eTSEC_MDIO_BUS +#define CONFIG_MIIM_ADDRESS 0xE0024520 +#endif + +#define CONFIG_UEC_ETH1 /* GETH1 */ + +#ifdef CONFIG_UEC_ETH1 +#define CFG_UEC1_UCC_NUM 0 /* UCC1 */ +#define CFG_UEC1_RX_CLK QE_CLK_NONE +#define CFG_UEC1_TX_CLK QE_CLK16 +#define CFG_UEC1_ETH_TYPE GIGA_ETH +#define CFG_UEC1_PHY_ADDR 7 +#define CFG_UEC1_INTERFACE_MODE ENET_1000_GMII +#endif + +#define CONFIG_UEC_ETH2 /* GETH2 */ + +#ifdef CONFIG_UEC_ETH2 +#define CFG_UEC2_UCC_NUM 1 /* UCC2 */ +#define CFG_UEC2_RX_CLK QE_CLK_NONE +#define CFG_UEC2_TX_CLK QE_CLK16 +#define CFG_UEC2_ETH_TYPE GIGA_ETH +#define CFG_UEC2_PHY_ADDR 1 +#define CFG_UEC2_INTERFACE_MODE ENET_1000_GMII +#endif +#endif /* CONFIG_QE */ + #undef CONFIG_EEPRO100 #undef CONFIG_TULIP @@ -348,13 +388,12 @@ extern unsigned long get_clock_freq(void); #endif /* CONFIG_PCI */ - -#if defined(CONFIG_TSEC_ENET) - #ifndef CONFIG_NET_MULTI #define CONFIG_NET_MULTI 1 #endif +#if defined(CONFIG_TSEC_ENET) + #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_TSEC1 1 #define CONFIG_TSEC1_NAME "eTSEC0" @@ -460,12 +499,15 @@ extern unsigned long get_clock_freq(void); */ /* The mac addresses for all ethernet interface */ -#if defined(CONFIG_TSEC_ENET) +#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_UEC_ETH) +#define CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:E0:0C:00:00:FD #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD #define CONFIG_HAS_ETH2 #define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD +#define CONFIG_HAS_ETH3 +#define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD #endif #define CONFIG_IPADDR 192.168.1.253 -- cgit v1.3.1 From 7f3f2bd2dc08e0b05e185662ca2e2d283757104a Mon Sep 17 00:00:00 2001 From: Randy Vinson Date: Tue, 27 Feb 2007 19:42:22 -0700 Subject: 85xxCDS: Add make targets for legacy systems. The PCI ID select values on the Arcadia main board differ depending on the version of the hardware. The standard configuration supports Rev 3.1. The legacy target supports Rev 2.x. Signed-off-by Randy Vinson --- Makefile | 27 ++++++++++++++++++++++++--- board/cds/common/via.c | 2 +- board/cds/mpc8541cds/mpc8541cds.c | 15 +++++++++------ board/cds/mpc8548cds/mpc8548cds.c | 15 +++++++++------ board/cds/mpc8555cds/mpc8555cds.c | 15 +++++++++------ cpu/mpc85xx/pci.c | 2 +- include/configs/MPC8541CDS.h | 7 +++++++ include/configs/MPC8548CDS.h | 8 ++++++++ include/configs/MPC8555CDS.h | 7 +++++++ 9 files changed, 75 insertions(+), 23 deletions(-) (limited to 'include/configs') diff --git a/Makefile b/Makefile index a5698cf7c95..95e9e369a5f 100644 --- a/Makefile +++ b/Makefile @@ -1786,17 +1786,38 @@ MPC8540EVAL_66_slave_config: unconfig MPC8560ADS_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads +MPC8541CDS_legacy_config \ MPC8541CDS_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8541cds cds + @mkdir -p $(obj)include + @echo "" >$(obj)include/config.h ; \ + if [ "$(findstring _legacy_,$@)" ] ; then \ + echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ + echo "... legacy" ; \ + fi + @$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds cds MPC8544DS_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8544ds freescale +MPC8548CDS_legacy_config \ MPC8548CDS_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8548cds cds + @mkdir -p $(obj)include + @echo "" >$(obj)include/config.h ; \ + if [ "$(findstring _legacy_,$@)" ] ; then \ + echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ + echo "... legacy" ; \ + fi + @$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds cds +MPC8555CDS_legacy_config \ MPC8555CDS_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8555cds cds + @mkdir -p $(obj)include + @echo "" >$(obj)include/config.h ; \ + if [ "$(findstring _legacy_,$@)" ] ; then \ + echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ + echo "... legacy" ; \ + fi + @$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds cds MPC8568MDS_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds diff --git a/board/cds/common/via.c b/board/cds/common/via.c index ded214f06f7..4a63d779440 100644 --- a/board/cds/common/via.c +++ b/board/cds/common/via.c @@ -45,7 +45,7 @@ void mpc85xx_config_via(struct pci_controller *hose, * This allows legacy I/O (i8259, etc) on the VIA * southbridge to be accessed. */ - bridge = PCI_BDF(0,17,0); + bridge = PCI_BDF(0,BRIDGE_ID,0); pci_hose_write_config_byte(hose, bridge, PCI_IO_BASE, 0); pci_hose_write_config_word(hose, bridge, PCI_IO_BASE_UPPER16, 0); pci_hose_write_config_byte(hose, bridge, PCI_IO_LIMIT, 0x10); diff --git a/board/cds/mpc8541cds/mpc8541cds.c b/board/cds/mpc8541cds/mpc8541cds.c index 41923248360..558ba9903ce 100644 --- a/board/cds/mpc8541cds/mpc8541cds.c +++ b/board/cds/mpc8541cds/mpc8541cds.c @@ -476,14 +476,17 @@ void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_ta static struct pci_config_table pci_mpc85xxcds_config_table[] = { {0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}}, - {0x1106, 0x0686, PCI_ANY_ID, 1, 2, 0, mpc85xx_config_via, {0,0,0}}, - {0x1106, 0x0571, PCI_ANY_ID, 1, 2, 1, + {0x1106, 0x0686, PCI_ANY_ID, 1, VIA_ID, 0, mpc85xx_config_via, {0,0,0}}, + {0x1106, 0x0571, PCI_ANY_ID, 1, VIA_ID, 1, mpc85xx_config_via_usbide, {0,0,0}}, - {0x1105, 0x3038, PCI_ANY_ID, 1, 2, 2, mpc85xx_config_via_usb, {0,0,0}}, - {0x1106, 0x3038, PCI_ANY_ID, 1, 2, 3, mpc85xx_config_via_usb2, {0,0,0}}, - {0x1106, 0x3058, PCI_ANY_ID, 1, 2, 5, + {0x1105, 0x3038, PCI_ANY_ID, 1, VIA_ID, 2, + mpc85xx_config_via_usb, {0,0,0}}, + {0x1106, 0x3038, PCI_ANY_ID, 1, VIA_ID, 3, + mpc85xx_config_via_usb2, {0,0,0}}, + {0x1106, 0x3058, PCI_ANY_ID, 1, VIA_ID, 5, mpc85xx_config_via_power, {0,0,0}}, - {0x1106, 0x3068, PCI_ANY_ID, 1, 2, 6, mpc85xx_config_via_ac97, {0,0,0}}, + {0x1106, 0x3068, PCI_ANY_ID, 1, VIA_ID, 6, + mpc85xx_config_via_ac97, {0,0,0}}, {}, }; diff --git a/board/cds/mpc8548cds/mpc8548cds.c b/board/cds/mpc8548cds/mpc8548cds.c index 242a68c391d..48753d7e241 100644 --- a/board/cds/mpc8548cds/mpc8548cds.c +++ b/board/cds/mpc8548cds/mpc8548cds.c @@ -299,14 +299,17 @@ void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_ta static struct pci_config_table pci_mpc85xxcds_config_table[] = { {0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}}, - {0x1106, 0x0686, PCI_ANY_ID, 1, 2, 0, mpc85xx_config_via, {0,0,0}}, - {0x1106, 0x0571, PCI_ANY_ID, 1, 2, 1, + {0x1106, 0x0686, PCI_ANY_ID, 1, VIA_ID, 0, mpc85xx_config_via, {0,0,0}}, + {0x1106, 0x0571, PCI_ANY_ID, 1, VIA_ID, 1, mpc85xx_config_via_usbide, {0,0,0}}, - {0x1105, 0x3038, PCI_ANY_ID, 1, 2, 2, mpc85xx_config_via_usb, {0,0,0}}, - {0x1106, 0x3038, PCI_ANY_ID, 1, 2, 3, mpc85xx_config_via_usb2, {0,0,0}}, - {0x1106, 0x3058, PCI_ANY_ID, 1, 2, 5, + {0x1105, 0x3038, PCI_ANY_ID, 1, VIA_ID, 2, + mpc85xx_config_via_usb, {0,0,0}}, + {0x1106, 0x3038, PCI_ANY_ID, 1, VIA_ID, 3, + mpc85xx_config_via_usb2, {0,0,0}}, + {0x1106, 0x3058, PCI_ANY_ID, 1, VIA_ID, 5, mpc85xx_config_via_power, {0,0,0}}, - {0x1106, 0x3068, PCI_ANY_ID, 1, 2, 6, mpc85xx_config_via_ac97, {0,0,0}}, + {0x1106, 0x3068, PCI_ANY_ID, 1, VIA_ID, 6, + mpc85xx_config_via_ac97, {0,0,0}}, {}, }; diff --git a/board/cds/mpc8555cds/mpc8555cds.c b/board/cds/mpc8555cds/mpc8555cds.c index 704bf03164a..8f1642187c1 100644 --- a/board/cds/mpc8555cds/mpc8555cds.c +++ b/board/cds/mpc8555cds/mpc8555cds.c @@ -473,14 +473,17 @@ void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_ta static struct pci_config_table pci_mpc85xxcds_config_table[] = { {0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}}, - {0x1106, 0x0686, PCI_ANY_ID, 1, 2, 0, mpc85xx_config_via, {0,0,0}}, - {0x1106, 0x0571, PCI_ANY_ID, 1, 2, 1, + {0x1106, 0x0686, PCI_ANY_ID, 1, VIA_ID, 0, mpc85xx_config_via, {0,0,0}}, + {0x1106, 0x0571, PCI_ANY_ID, 1, VIA_ID, 1, mpc85xx_config_via_usbide, {0,0,0}}, - {0x1105, 0x3038, PCI_ANY_ID, 1, 2, 2, mpc85xx_config_via_usb, {0,0,0}}, - {0x1106, 0x3038, PCI_ANY_ID, 1, 2, 3, mpc85xx_config_via_usb2, {0,0,0}}, - {0x1106, 0x3058, PCI_ANY_ID, 1, 2, 5, + {0x1105, 0x3038, PCI_ANY_ID, 1, VIA_ID, 2, + mpc85xx_config_via_usb, {0,0,0}}, + {0x1106, 0x3038, PCI_ANY_ID, 1, VIA_ID, 3, + mpc85xx_config_via_usb2, {0,0,0}}, + {0x1106, 0x3058, PCI_ANY_ID, 1, VIA_ID, 5, mpc85xx_config_via_power, {0,0,0}}, - {0x1106, 0x3068, PCI_ANY_ID, 1, 2, 6, mpc85xx_config_via_ac97, {0,0,0}}, + {0x1106, 0x3068, PCI_ANY_ID, 1, VIA_ID, 6, + mpc85xx_config_via_ac97, {0,0,0}}, {}, }; diff --git a/cpu/mpc85xx/pci.c b/cpu/mpc85xx/pci.c index 3c1a323aad2..db09e45fbcc 100644 --- a/cpu/mpc85xx/pci.c +++ b/cpu/mpc85xx/pci.c @@ -142,7 +142,7 @@ pci_mpc85xx_init(struct pci_controller *board_hose) u8 header_type; pci_hose_read_config_byte(hose, - PCI_BDF(0,17,0), + PCI_BDF(0,BRIDGE_ID,0), PCI_HEADER_TYPE, &header_type); } diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index 50d3b6b8727..232f1716bcc 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -350,6 +350,13 @@ extern unsigned long get_clock_freq(void); #define CFG_PCI2_IO_PHYS 0xe2100000 #define CFG_PCI2_IO_SIZE 0x100000 /* 1M */ +#ifdef CONFIG_LEGACY +#define BRIDGE_ID 17 +#define VIA_ID 2 +#else +#define BRIDGE_ID 28 +#define VIA_ID 4 +#endif #if defined(CONFIG_PCI) diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index dfe4f5b7a1b..cda9fd5c1c7 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -395,6 +395,14 @@ extern unsigned long get_clock_freq(void); #define CFG_RIO_MEM_SIZE 0x20000000 /* 512M */ #endif +#ifdef CONFIG_LEGACY +#define BRIDGE_ID 17 +#define VIA_ID 2 +#else +#define BRIDGE_ID 28 +#define VIA_ID 4 +#endif + #if defined(CONFIG_PCI) #define CONFIG_NET_MULTI diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index a3025bd7157..e8fe99aaf13 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -350,6 +350,13 @@ extern unsigned long get_clock_freq(void); #define CFG_PCI2_IO_PHYS 0xe2100000 #define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */ +#ifdef CONFIG_LEGACY +#define BRIDGE_ID 17 +#define VIA_ID 2 +#else +#define BRIDGE_ID 28 +#define VIA_ID 4 +#endif #if defined(CONFIG_PCI) -- cgit v1.3.1 From d4fc6012fd0a5c211b825691f44b06f8032c0551 Mon Sep 17 00:00:00 2001 From: Peter Pearse Date: Tue, 14 Aug 2007 10:10:52 +0100 Subject: Add MACH_TYPE records for several AT91 boards. Merge to two at45.c files into a common file, split to at45.c and spi.c Fix spelling error in DM9161 PHY Support. Initialize at91rm9200 board (and set LED). Add PIO control for at91rm9200dk LEDs and Mux. Change dataflash partition boundaries to be compatible with Linux 2.6. Signed-off-by: Peter Pearse Signed-off-by: Ulf Samuelsson --- board/at91rm9200dk/Makefile | 2 +- common/soft_i2c.c | 2 +- cpu/arm920t/at91rm9200/Makefile | 2 +- cpu/arm920t/at91rm9200/dm9161.c | 11 +- cpu/arm920t/start.S | 93 ++++++++- drivers/dataflash.c | 279 ++++++++++++++++++++------- include/asm-arm/arch-at91rm9200/AT91RM9200.h | 139 +++++++------ include/asm-arm/mach-types.h | 69 +++++++ include/config_cmd_all.h | 1 + include/configs/at91rm9200dk.h | 5 + include/dataflash.h | 43 ++++- include/dm9161.h | 4 +- include/flash.h | 5 + 13 files changed, 516 insertions(+), 139 deletions(-) (limited to 'include/configs') diff --git a/board/at91rm9200dk/Makefile b/board/at91rm9200dk/Makefile index 0fcafd9b0fc..7dfc27f0a74 100644 --- a/board/at91rm9200dk/Makefile +++ b/board/at91rm9200dk/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := at91rm9200dk.o at45.o flash.o +COBJS := at91rm9200dk.o at45.o flash.o led.o mux.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/common/soft_i2c.c b/common/soft_i2c.c index 0f6e3a938d2..c5d7e205e54 100644 --- a/common/soft_i2c.c +++ b/common/soft_i2c.c @@ -29,7 +29,7 @@ #ifdef CONFIG_MPC8260 /* only valid for MPC8260 */ #include #endif -#ifdef CONFIG_AT91RM9200DK /* need this for the at91rm9200dk */ +#ifdef CONFIG_AT91RM9200 /* need this for the at91rm9200 */ #include #include #endif diff --git a/cpu/arm920t/at91rm9200/Makefile b/cpu/arm920t/at91rm9200/Makefile index eaabad26a0c..ab4c52c8fb0 100644 --- a/cpu/arm920t/at91rm9200/Makefile +++ b/cpu/arm920t/at91rm9200/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).a COBJS = bcm5221.o dm9161.o ether.o i2c.o interrupts.o \ - lxt972.o serial.o usb.o + lxt972.o serial.o usb.o spi.o SOBJS = lowlevel_init.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/cpu/arm920t/at91rm9200/dm9161.c b/cpu/arm920t/at91rm9200/dm9161.c index 968f653081f..1beb6e8ba11 100644 --- a/cpu/arm920t/at91rm9200/dm9161.c +++ b/cpu/arm920t/at91rm9200/dm9161.c @@ -95,7 +95,7 @@ UCHAR dm9161_GetLinkSpeed (AT91PS_EMAC p_mac) return TRUE; } - if ((stat1 & DM9161_100BASE_T4_HD) && (stat2 & DM9161_100HDX)) { + if ((stat1 & DM9161_100BASE_TX_HD) && (stat2 & DM9161_100HDX)) { /*set MII for 100BaseTX and Half Duplex */ p_mac->EMAC_CFG = (p_mac->EMAC_CFG & ~(AT91C_EMAC_SPD | AT91C_EMAC_FD)) @@ -140,7 +140,7 @@ UCHAR dm9161_InitPhy (AT91PS_EMAC p_mac) at91rm9200_EmacReadPhy (p_mac, DM9161_MDINTR, &IntValue); /* set FDX, SPD, Link, INTR masks */ IntValue |= (DM9161_FDX_MASK | DM9161_SPD_MASK | - DM9161_LINK_MASK | DM9161_INTR_MASK); + DM9161_LINK_MASK | DM9161_INTR_MASK); at91rm9200_EmacWritePhy (p_mac, DM9161_MDINTR, &IntValue); at91rm9200_EmacDisableMDIO (p_mac); @@ -174,10 +174,11 @@ UCHAR dm9161_AutoNegotiate (AT91PS_EMAC p_mac, int *status) if (!at91rm9200_EmacWritePhy (p_mac, DM9161_BMCR, &value)) return FALSE; - /* Set the Auto_negotiation Advertisement Register */ - /* MII advertising for Next page, 100BaseTxFD and HD, 10BaseTFD and HD, IEEE 802.3 */ + /* Set the Auto_negotiation Advertisement Register */ + /* MII advertising for Next page, 100BaseTxFD and HD, */ + /* 10BaseTFD and HD, IEEE 802.3 */ PhyAnar = DM9161_NP | DM9161_TX_FDX | DM9161_TX_HDX | - DM9161_10_FDX | DM9161_10_HDX | DM9161_AN_IEEE_802_3; + DM9161_10_FDX | DM9161_10_HDX | DM9161_AN_IEEE_802_3; if (!at91rm9200_EmacWritePhy (p_mac, DM9161_ANAR, &PhyAnar)) return FALSE; diff --git a/cpu/arm920t/start.S b/cpu/arm920t/start.S index 346f0d09ea7..b9c364bc672 100644 --- a/cpu/arm920t/start.S +++ b/cpu/arm920t/start.S @@ -27,7 +27,9 @@ #include #include - +#if defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) || defined(CONFIG_AT91RM9200DF) +#include +#endif /* ************************************************************************* @@ -116,6 +118,69 @@ reset: orr r0,r0,#0xd3 msr cpsr,r0 +#if CONFIG_AT91RM9200 +#if defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) || defined(CONFIG_AT91RM9200DF) + bl LED_init + bl red_LED_on +#endif + +#ifdef CONFIG_BOOTBINFUNC +/* code based on entry.S from ATMEL */ +#define AT91C_BASE_CKGR 0xFFFFFC20 +#define CKGR_MOR 0 + /* Get the CKGR Base Address */ + ldr r1, =AT91C_BASE_CKGR + +/* Main oscillator Enable register APMC_MOR : Enable main oscillator , OSCOUNT = 0xFF */ +/* ldr r0, = AT91C_CKGR_MOSCEN:OR:AT91C_CKGR_OSCOUNT */ + ldr r0, =0x0000FF01 + str r0, [r1, #CKGR_MOR] + /* Add loop to compensate Main Oscillator startup time */ + ldr r0, =0x00000010 +LoopOsc: + subs r0, r0, #1 + bhi LoopOsc + /* scratch stack */ + ldr r1, =0x00204000 + /* Insure word alignment */ + bic r1, r1, #3 + /* Init stack SYS */ + mov sp, r1 + /* + * This does a lot more than just set up the memory, which + * is why it's called lowlevelinit + */ + bl lowlevelinit /* in memsetup.S */ + bl icache_enable; + /* ------------------------------------ + * Read/modify/write CP15 control register + * ------------------------------------- + * read cp15 control register (cp15 r1) in r0 + * ------------------------------------ + */ + mrc p15, 0, r0, c1, c0, 0 + /* Reset bit :Little Endian end fast bus mode */ + ldr r3, =0xC0000080 + /* Set bit :Asynchronous clock mode, Not Fast Bus */ + ldr r4, =0xC0000000 + bic r0, r0, r3 + orr r0, r0, r4 + /* write r0 in cp15 control register (cp15 r1) */ + mcr p15, 0, r0, c1, c0, 0 +#endif /* CONFIG_BOOTBINFUNC */ + /* + * relocate exeception table + */ + ldr r0, =_start + ldr r1, =0x0 + mov r2, #16 +copyex: + subs r2, r2, #1 + ldr r3, [r0], #4 + str r3, [r1], #4 + bne copyex +#endif + /* turn off the watchdog */ #if defined(CONFIG_S3C2400) # define pWTCON 0x15300000 @@ -160,6 +225,26 @@ reset: bl cpu_init_crit #endif +#ifdef CONFIG_AT91RM9200 +#ifdef CONFIG_BOOTBINFUNC +relocate: /* relocate U-Boot to RAM */ + adr r0, _start /* r0 <- current position of code */ + ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ + cmp r0, r1 /* don't reloc during debug */ + beq stack_setup + + ldr r2, _armboot_start + ldr r3, _bss_start + sub r2, r3, r2 /* r2 <- size of armboot */ + add r2, r0, r2 /* r2 <- source end address */ + +copy_loop: + ldmia r0!, {r3-r10} /* copy from source address [r0] */ + stmia r1!, {r3-r10} /* copy to target address [r1] */ + cmp r0, r2 /* until source end addreee [r2] */ + ble copy_loop +#endif /* CONFIG_BOOTBINFUNC */ +#else #ifndef CONFIG_SKIP_RELOCATE_UBOOT relocate: /* relocate U-Boot to RAM */ adr r0, _start /* r0 <- current position of code */ @@ -178,7 +263,7 @@ copy_loop: cmp r0, r2 /* until source end addreee [r2] */ ble copy_loop #endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - +#endif /* Set up the stack */ stack_setup: ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ @@ -262,7 +347,11 @@ cpu_init_crit: * find a lowlevel_init.S in your board directory. */ mov ip, lr +#if defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) || defined(CONFIG_AT91RM9200DF) + +#else bl lowlevel_init +#endif mov lr, ip mov pc, lr #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ diff --git a/drivers/dataflash.c b/drivers/dataflash.c index 17eb8597f8c..3b068d7125c 100644 --- a/drivers/dataflash.c +++ b/drivers/dataflash.c @@ -26,18 +26,67 @@ AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS]; static AT91S_DataFlash DataFlashInst; +#ifdef CONFIG_AT91SAM9260EK +int cs[][CFG_MAX_DATAFLASH_BANKS] = { + {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */ + {CFG_DATAFLASH_LOGIC_ADDR_CS1, 1} +}; +#elif defined(CONFIG_AT91SAM9263EK) +int cs[][CFG_MAX_DATAFLASH_BANKS] = { + {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0} /* Logical adress, CS */ +}; +#else int cs[][CFG_MAX_DATAFLASH_BANKS] = { {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */ {CFG_DATAFLASH_LOGIC_ADDR_CS3, 3} }; +#endif /*define the area offsets*/ +#if defined(CONFIG_AT91SAM9261EK) || defined(CONFIG_AT91SAM9260EK) || defined(CONFIG_AT91SAM9263EK) +#if defined(CONFIG_NEW_PARTITION) +dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { + {0x00000000, 0x00003FFF, FLAG_PROTECT_SET, 0, "Bootstrap"}, /* ROM code */ + {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"}, /* u-boot environment */ + {0x00008400, 0x0003DDFF, FLAG_PROTECT_SET, 0, "U-Boot"}, /* u-boot code */ + {0x0003DE00, 0x00041FFF, FLAG_PROTECT_CLEAR, FLAG_SETENV, "MON"}, /* Room for alternative boot monitor */ + {0x00042000, 0x0018BFFF, FLAG_PROTECT_CLEAR, FLAG_SETENV, "OS"}, /* data area size to tune */ + {0x0018C000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, FLAG_SETENV, "FS"}, /* data area size to tune */ +}; +#else +dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { + {0, 0x3fff, FLAG_PROTECT_SET}, /* ROM code */ + {0x4000, 0x7fff, FLAG_PROTECT_CLEAR}, /* u-boot environment */ + {0x8000, 0x37fff, FLAG_PROTECT_SET}, /* u-boot code */ + {0x38000, 0x1fffff, FLAG_PROTECT_CLEAR}, /* data area size to tune */ +}; +#endif +#elif defined(CONFIG_NEW_PARTITION) +/*define the area offsets*/ +/* Invalid partitions should be defined with start > end */ +dataflash_protect_t area_list[NB_DATAFLASH_AREA*CFG_MAX_DATAFLASH_BANKS] = { + {0x00000000, 0x000083ff, FLAG_PROTECT_SET, 0, "Bootstrap"}, /* ROM code */ + {0x00008400, 0x00020fff, FLAG_PROTECT_SET, 0, "U-Boot"}, /* u-boot code */ + {0x00021000, 0x000293ff, FLAG_PROTECT_CLEAR, 0, "Environment"}, /* u-boot environment 8Kb */ + {0x00029400, 0x00041fff, FLAG_PROTECT_INVALID, 0, ""}, /* Rest of Sector 1 */ + {0x00042000, 0x0018Bfff, FLAG_PROTECT_CLEAR, FLAG_SETENV, "OS"}, /* data area size to tune */ + {0x0018C000, 0xffffffff, FLAG_PROTECT_CLEAR, FLAG_SETENV, "FS"}, /* data area size to tune */ + + {0x00000000, 0xffffffff, FLAG_PROTECT_CLEAR, FLAG_SETENV, "Data"}, /* data area */ + {0xffffffff, 0x00000000, FLAG_PROTECT_INVALID, 0, ""}, /* Invalid */ + {0xffffffff, 0x00000000, FLAG_PROTECT_INVALID, 0, ""}, /* Invalid */ + {0xffffffff, 0x00000000, FLAG_PROTECT_INVALID, 0, ""}, /* Invalid */ + {0xffffffff, 0x00000000, FLAG_PROTECT_INVALID, 0, ""}, /* Invalid */ + {0xffffffff, 0x00000000, FLAG_PROTECT_INVALID, 0, ""}, /* Invalid */ +}; +#else dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { {0, 0x7fff, FLAG_PROTECT_SET}, /* ROM code */ {0x8000, 0x1ffff, FLAG_PROTECT_SET}, /* u-boot code */ {0x20000, 0x27fff, FLAG_PROTECT_CLEAR}, /* u-boot environment */ {0x28000, 0x1fffff, FLAG_PROTECT_CLEAR}, /* data area size to tune */ }; +#endif extern void AT91F_SpiInit (void); extern int AT91F_DataflashProbe (int i, AT91PS_DataflashDesc pDesc); @@ -45,22 +94,28 @@ extern int AT91F_DataFlashRead (AT91PS_DataFlash pDataFlash, unsigned long addr, unsigned long size, char *buffer); extern int AT91F_DataFlashWrite( AT91PS_DataFlash pDataFlash, - unsigned char *src, - int dest, - int size ); + unsigned char *src, + int dest, + int size ); int AT91F_DataflashInit (void) { int i, j; int dfcode; + int part = 0; + int last_part; + int found[CFG_MAX_DATAFLASH_BANKS]; + unsigned char protected; AT91F_SpiInit (); for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++) { + found[i] = 0; dataflash_info[i].Desc.state = IDLE; dataflash_info[i].id = 0; dataflash_info[i].Device.pages_number = 0; - dfcode = AT91F_DataflashProbe (cs[i][1], &dataflash_info[i].Desc); + dfcode = AT91F_DataflashProbe (cs[i][1], + &dataflash_info[i].Desc); switch (dfcode) { case AT45DB161: @@ -72,6 +127,7 @@ int AT91F_DataflashInit (void) dataflash_info[i].Desc.DataFlash_state = IDLE; dataflash_info[i].logical_address = cs[i][0]; dataflash_info[i].id = dfcode; + found[i] += dfcode;; break; case AT45DB321: @@ -83,6 +139,7 @@ int AT91F_DataflashInit (void) dataflash_info[i].Desc.DataFlash_state = IDLE; dataflash_info[i].logical_address = cs[i][0]; dataflash_info[i].id = dfcode; + found[i] += dfcode;; break; case AT45DB642: @@ -94,7 +151,9 @@ int AT91F_DataflashInit (void) dataflash_info[i].Desc.DataFlash_state = IDLE; dataflash_info[i].logical_address = cs[i][0]; dataflash_info[i].id = dfcode; + found[i] += dfcode;; break; + case AT45DB128: dataflash_info[i].Device.pages_number = 16384; dataflash_info[i].Device.pages_size = 1056; @@ -104,9 +163,11 @@ int AT91F_DataflashInit (void) dataflash_info[i].Desc.DataFlash_state = IDLE; dataflash_info[i].logical_address = cs[i][0]; dataflash_info[i].id = dfcode; + found[i] += dfcode;; break; default: + dfcode = 0; break; } /* set the last area end to the dataflash size*/ @@ -114,16 +175,64 @@ int AT91F_DataflashInit (void) (dataflash_info[i].Device.pages_number * dataflash_info[i].Device.pages_size)-1; + last_part=0; /* set the area addresses */ for(j = 0; j (pdataFlash->pDevice->pages_size * pdataFlash->pDevice->pages_number)) return 0; /* is too large for the dataflash */ if (size > ((pdataFlash->pDevice->pages_size * - pdataFlash->pDevice->pages_number) - ((int)addr & 0x0FFFFFFF))) return 0; + pdataFlash->pDevice->pages_number) - + ((int)addr & 0x0FFFFFFF))) return 0; return 1; } -/*-----------------------------------------------------------------------------*/ -/* Function Name : prot_dataflash */ -/* Object : Test if destination area is protected */ -/*-----------------------------------------------------------------------------*/ +/*---------------------------------------------------------------------------*/ +/* Function Name : prot_dataflash */ +/* Object : Test if destination area is protected */ +/*---------------------------------------------------------------------------*/ int prot_dataflash (AT91PS_DataFlash pdataFlash, unsigned long addr) { int area; @@ -241,17 +368,23 @@ int area; (addr < pdataFlash->pDevice->area_list[area].end)) break; } - if (area == NB_DATAFLASH_AREA) return -1; + if (area == NB_DATAFLASH_AREA) + return -1; + /*test protection value*/ - if (pdataFlash->pDevice->area_list[area].protected == FLAG_PROTECT_SET) return 0; + if (pdataFlash->pDevice->area_list[area].protected == FLAG_PROTECT_SET) + return 0; + if (pdataFlash->pDevice->area_list[area].protected == FLAG_PROTECT_INVALID) + return 0; return 1; } -/*-----------------------------------------------------------------------------*/ -/* Function Name : dataflash_real_protect */ -/* Object : protect/unprotect area */ -/*-----------------------------------------------------------------------------*/ -int dataflash_real_protect (int flag, unsigned long start_addr, unsigned long end_addr) +/*--------------------------------------------------------------------------*/ +/* Function Name : dataflash_real_protect */ +/* Object : protect/unprotect area */ +/*--------------------------------------------------------------------------*/ +int dataflash_real_protect (int flag, unsigned long start_addr, + unsigned long end_addr) { int i,j, area1, area2, addr_valid = 0; /* find dataflash */ @@ -267,27 +400,38 @@ int i,j, area1, area2, addr_valid = 0; } /* find start area */ for (area1=0; area1 < NB_DATAFLASH_AREA; area1++) { - if (start_addr == dataflash_info[i].Device.area_list[area1].start) break; + if (start_addr == dataflash_info[i].Device.area_list[area1].start) + break; } if (area1 == NB_DATAFLASH_AREA) return -1; /* find end area */ for (area2=0; area2 < NB_DATAFLASH_AREA; area2++) { - if (end_addr == dataflash_info[i].Device.area_list[area2].end) break; + if (end_addr == dataflash_info[i].Device.area_list[area2].end) + break; } - if (area2 == NB_DATAFLASH_AREA) return -1; + if (area2 == NB_DATAFLASH_AREA) + return -1; /*set protection value*/ for(j = area1; j < area2+1 ; j++) - if (flag == 0) dataflash_info[i].Device.area_list[j].protected = FLAG_PROTECT_CLEAR; - else dataflash_info[i].Device.area_list[j].protected = FLAG_PROTECT_SET; + if(dataflash_info[i].Device.area_list[j].protected + != FLAG_PROTECT_INVALID) { + if (flag == 0) { + dataflash_info[i].Device.area_list[j].protected + = FLAG_PROTECT_CLEAR; + } else { + dataflash_info[i].Device.area_list[j].protected + = FLAG_PROTECT_SET; + } + } return (area2-area1+1); } -/*------------------------------------------------------------------------------*/ -/* Function Name : read_dataflash */ -/* Object : dataflash memory read */ -/*------------------------------------------------------------------------------*/ +/*---------------------------------------------------------------------------*/ +/* Function Name : read_dataflash */ +/* Object : dataflash memory read */ +/*---------------------------------------------------------------------------*/ int read_dataflash (unsigned long addr, unsigned long size, char *result) { unsigned long AddrToRead = addr; @@ -305,12 +449,12 @@ int read_dataflash (unsigned long addr, unsigned long size, char *result) } -/*-----------------------------------------------------------------------------*/ -/* Function Name : write_dataflash */ -/* Object : write a block in dataflash */ -/*-----------------------------------------------------------------------------*/ +/*---------------------------------------------------------------------------*/ +/* Function Name : write_dataflash */ +/* Object : write a block in dataflash */ +/*---------------------------------------------------------------------------*/ int write_dataflash (unsigned long addr_dest, unsigned long addr_src, - unsigned long size) + unsigned long size) { unsigned long AddrToWrite = addr_dest; AT91PS_DataFlash pFlash = &DataFlashInst; @@ -329,7 +473,8 @@ int write_dataflash (unsigned long addr_dest, unsigned long addr_src, if (AddrToWrite == -1) return -1; - return AT91F_DataFlashWrite (pFlash, (uchar *)addr_src, AddrToWrite, size); + return AT91F_DataFlashWrite (pFlash, (uchar *)addr_src, + AddrToWrite, size); } @@ -339,22 +484,22 @@ void dataflash_perror (int err) case ERR_OK: break; case ERR_TIMOUT: - printf ("Timeout writing to DataFlash\n"); + printf("Timeout writing to DataFlash\n"); break; case ERR_PROTECTED: - printf ("Can't write to protected DataFlash sectors\n"); + printf("Can't write to protected/invalid DataFlash sectors\n"); break; case ERR_INVAL: - printf ("Outside available DataFlash\n"); + printf("Outside available DataFlash\n"); break; case ERR_UNKNOWN_FLASH_TYPE: - printf ("Unknown Type of DataFlash\n"); + printf("Unknown Type of DataFlash\n"); break; case ERR_PROG_ERROR: - printf ("General DataFlash Programming Error\n"); + printf("General DataFlash Programming Error\n"); break; default: - printf ("%s[%d] FIXME: rc=%d\n", __FILE__, __LINE__, err); + printf("%s[%d] FIXME: rc=%d\n", __FILE__, __LINE__, err); break; } } diff --git a/include/asm-arm/arch-at91rm9200/AT91RM9200.h b/include/asm-arm/arch-at91rm9200/AT91RM9200.h index 97d470484c3..0e01005a915 100644 --- a/include/asm-arm/arch-at91rm9200/AT91RM9200.h +++ b/include/asm-arm/arch-at91rm9200/AT91RM9200.h @@ -27,9 +27,9 @@ typedef volatile unsigned int AT91_REG; /* Hardware register definition */ -/******************************************************************************/ -/* SOFTWARE API DEFINITION FOR Timer Counter Channel Interface */ -/******************************************************************************/ +/*****************************************************************************/ +/* SOFTWARE API DEFINITION FOR Timer Counter Channel Interface */ +/*****************************************************************************/ typedef struct _AT91S_TC { AT91_REG TC_CCR; /* Channel Control Register */ @@ -45,24 +45,24 @@ typedef struct _AT91S_TC AT91_REG TC_IMR; /* Interrupt Mask Register */ } AT91S_TC, *AT91PS_TC; -#define AT91C_TC_TIMER_DIV1_CLOCK ((unsigned int) 0x0 << 0) /* (TC) MCK/2 */ -#define AT91C_TC_TIMER_DIV2_CLOCK ((unsigned int) 0x1 << 0) /* (TC) MCK/8 */ -#define AT91C_TC_TIMER_DIV3_CLOCK ((unsigned int) 0x2 << 0) /* (TC) MCK/32 */ -#define AT91C_TC_TIMER_DIV4_CLOCK ((unsigned int) 0x3 << 0) /* (TC) MCK/128 */ -#define AT91C_TC_SLOW_CLOCK ((unsigned int) 0x4 << 0) /* (TC) SLOW CLK */ -#define AT91C_TC_XC0_CLOCK ((unsigned int) 0x5 << 0) /* (TC) XC0 */ -#define AT91C_TC_XC1_CLOCK ((unsigned int) 0x6 << 0) /* (TC) XC1 */ -#define AT91C_TC_XC2_CLOCK ((unsigned int) 0x7 << 0) /* (TC) XC2 */ -#define AT91C_TCB_TC0XC0S_NONE ((unsigned int) 0x1) /* (TCB) None signal connected to XC0 */ -#define AT91C_TCB_TC1XC1S_NONE ((unsigned int) 0x1 << 2) /* (TCB) None signal connected to XC1 */ -#define AT91C_TCB_TC2XC2S_NONE ((unsigned int) 0x1 << 4) /* (TCB) None signal connected to XC2 */ -#define AT91C_TC_CLKDIS ((unsigned int) 0x1 << 1) /* (TC) Counter Clock Disable Command */ -#define AT91C_TC_SWTRG ((unsigned int) 0x1 << 2) /* (TC) Software Trigger Command */ -#define AT91C_TC_CLKEN ((unsigned int) 0x1 << 0) /* (TC) Counter Clock Enable Command */ - -/******************************************************************************/ -/* SOFTWARE API DEFINITION FOR Usart */ -/******************************************************************************/ +#define AT91C_TC_TIMER_DIV1_CLOCK ((unsigned int) 0x0 << 0) /* (TC) MCK/2 */ +#define AT91C_TC_TIMER_DIV2_CLOCK ((unsigned int) 0x1 << 0) /* (TC) MCK/8 */ +#define AT91C_TC_TIMER_DIV3_CLOCK ((unsigned int) 0x2 << 0) /* (TC) MCK/32 */ +#define AT91C_TC_TIMER_DIV4_CLOCK ((unsigned int) 0x3 << 0) /* (TC) MCK/128 */ +#define AT91C_TC_SLOW_CLOCK ((unsigned int) 0x4 << 0) /* (TC) SLOW CLK*/ +#define AT91C_TC_XC0_CLOCK ((unsigned int) 0x5 << 0) /* (TC) XC0 */ +#define AT91C_TC_XC1_CLOCK ((unsigned int) 0x6 << 0) /* (TC) XC1 */ +#define AT91C_TC_XC2_CLOCK ((unsigned int) 0x7 << 0) /* (TC) XC2 */ +#define AT91C_TCB_TC0XC0S_NONE ((unsigned int) 0x1) /* (TCB) None signal connected to XC0 */ +#define AT91C_TCB_TC1XC1S_NONE ((unsigned int) 0x1 << 2) /* (TCB) None signal connected to XC1 */ +#define AT91C_TCB_TC2XC2S_NONE ((unsigned int) 0x1 << 4) /* (TCB) None signal connected to XC2 */ +#define AT91C_TC_CLKDIS ((unsigned int) 0x1 << 1) /* (TC) Counter Clock Disable Command */ +#define AT91C_TC_SWTRG ((unsigned int) 0x1 << 2) /* (TC) Software Trigger Command */ +#define AT91C_TC_CLKEN ((unsigned int) 0x1 << 0) /* (TC) Counter Clock Enable Command */ + +/*****************************************************************************/ +/* SOFTWARE API DEFINITION FOR Usart */ +/*****************************************************************************/ typedef struct _AT91S_USART { AT91_REG US_CR; /* Control Register */ @@ -94,9 +94,9 @@ typedef struct _AT91S_USART AT91_REG US_PTSR; /* PDC Transfer Status Register */ } AT91S_USART, *AT91PS_USART; -/******************************************************************************/ -/* SOFTWARE API DEFINITION FOR Clock Generator Controler */ -/******************************************************************************/ +/*****************************************************************************/ +/* SOFTWARE API DEFINITION FOR Clock Generator Controler */ +/*****************************************************************************/ typedef struct _AT91S_CKGR { AT91_REG CKGR_MOR; /* Main Oscillator Register */ @@ -141,9 +141,9 @@ typedef struct _AT91S_CKGR #define AT91C_CKGR_USB_96M ((unsigned int) 0x1 << 28) /* (CKGR) Divider for USB Ports */ #define AT91C_CKGR_USB_PLL ((unsigned int) 0x1 << 29) /* (CKGR) PLL Use */ -/******************************************************************************/ -/* SOFTWARE API DEFINITION FOR Parallel Input Output Controler */ -/******************************************************************************/ +/*****************************************************************************/ +/* SOFTWARE API DEFINITION FOR Parallel Input Output Controler */ +/*****************************************************************************/ typedef struct _AT91S_PIO { AT91_REG PIO_PER; /* PIO Enable Register */ @@ -184,9 +184,9 @@ typedef struct _AT91S_PIO } AT91S_PIO, *AT91PS_PIO; -/******************************************************************************/ -/* SOFTWARE API DEFINITION FOR Debug Unit */ -/******************************************************************************/ +/*****************************************************************************/ +/* SOFTWARE API DEFINITION FOR Debug Unit */ +/*****************************************************************************/ typedef struct _AT91S_DBGU { AT91_REG DBGU_CR; /* Control Register */ @@ -242,9 +242,9 @@ typedef struct _AT91S_DBGU #define AT91C_US_PAR_NONE ((unsigned int) 0x4 << 9) /* (DBGU) No Parity */ #define AT91C_US_NBSTOP_1_BIT ((unsigned int) 0x0 << 12) /* (USART) 1 stop bit */ -/******************************************************************************/ -/* SOFTWARE API DEFINITION FOR Static Memory Controller 2 Interface */ -/******************************************************************************/ +/*****************************************************************************/ +/* SOFTWARE API DEFINITION FOR Static Memory Controller 2 Interface */ +/*****************************************************************************/ typedef struct _AT91S_SMC2 { AT91_REG SMC2_CSR[8]; /* SMC2 Chip Select Register */ @@ -267,9 +267,9 @@ typedef struct _AT91S_SMC2 #define AT91C_SMC2_RWSETUP ((unsigned int) 0x7 << 24) /* (SMC2) Read and Write Signal Setup Time */ #define AT91C_SMC2_RWHOLD ((unsigned int) 0x7 << 29) /* (SMC2) Read and Write Signal Hold Time */ -/******************************************************************************/ -/* SOFTWARE API DEFINITION FOR Power Management Controler */ -/******************************************************************************/ +/*****************************************************************************/ +/* SOFTWARE API DEFINITION FOR Power Management Controler */ +/*****************************************************************************/ typedef struct _AT91S_PMC { AT91_REG PMC_SCER; /* System Clock Enable Register */ @@ -341,9 +341,9 @@ typedef struct _AT91S_PMC /*-------- PMC_SR : (PMC Offset: 0x68) PMC Status Register --------*/ /*-------- PMC_IMR : (PMC Offset: 0x6c) PMC Interrupt Mask Register --------*/ -/******************************************************************************/ -/* SOFTWARE API DEFINITION FOR Ethernet MAC */ -/******************************************************************************/ +/*****************************************************************************/ +/* SOFTWARE API DEFINITION FOR Ethernet MAC */ +/*****************************************************************************/ typedef struct _AT91S_EMAC { AT91_REG EMAC_CTL; /* Network Control Register */ @@ -424,11 +424,11 @@ typedef struct _AT91S_EMAC #define AT91C_EMAC_MDIO ((unsigned int) 0x1 << 1) /* (EMAC) */ #define AT91C_EMAC_IDLE ((unsigned int) 0x1 << 2) /* (EMAC) */ -/* -------- EMAC_TCR : (EMAC Offset: 0x10) Transmit Control Register -------- */ +/* -------- EMAC_TCR : (EMAC Offset: 0x10) Transmit Control Register ------- */ #define AT91C_EMAC_LEN ((unsigned int) 0x7FF << 0) /* (EMAC) */ #define AT91C_EMAC_NCRC ((unsigned int) 0x1 << 15) /* (EMAC) */ -/* -------- EMAC_TSR : (EMAC Offset: 0x14) Transmit Control Register -------- */ +/* -------- EMAC_TSR : (EMAC Offset: 0x14) Transmit Control Register ------- */ #define AT91C_EMAC_OVR ((unsigned int) 0x1 << 0) /* (EMAC) */ #define AT91C_EMAC_COL ((unsigned int) 0x1 << 1) /* (EMAC) */ #define AT91C_EMAC_RLE ((unsigned int) 0x1 << 2) /* (EMAC) */ @@ -442,7 +442,7 @@ typedef struct _AT91S_EMAC #define AT91C_EMAC_REC ((unsigned int) 0x1 << 1) /* (EMAC) */ #define AT91C_EMAC_RSR_OVR ((unsigned int) 0x1 << 2) /* (EMAC) */ -/* -------- EMAC_ISR : (EMAC Offset: 0x24) Interrupt Status Register -------- */ +/* -------- EMAC_ISR : (EMAC Offset: 0x24) Interrupt Status Register ------- */ #define AT91C_EMAC_DONE ((unsigned int) 0x1 << 0) /* (EMAC) */ #define AT91C_EMAC_RCOM ((unsigned int) 0x1 << 1) /* (EMAC) */ #define AT91C_EMAC_RBNA ((unsigned int) 0x1 << 2) /* (EMAC) */ @@ -456,8 +456,8 @@ typedef struct _AT91S_EMAC #define AT91C_EMAC_ROVR ((unsigned int) 0x1 << 10) /* (EMAC) */ #define AT91C_EMAC_HRESP ((unsigned int) 0x1 << 11) /* (EMAC) */ -/* -------- EMAC_IER : (EMAC Offset: 0x28) Interrupt Enable Register -------- */ -/* -------- EMAC_IDR : (EMAC Offset: 0x2c) Interrupt Disable Register -------- */ +/* -------- EMAC_IER : (EMAC Offset: 0x28) Interrupt Enable Register ------- */ +/* -------- EMAC_IDR : (EMAC Offset: 0x2c) Interrupt Disable Register ------ */ /* -------- EMAC_IMR : (EMAC Offset: 0x30) Interrupt Mask Register -------- */ /* -------- EMAC_MAN : (EMAC Offset: 0x34) PHY Maintenance Register -------- */ #define AT91C_EMAC_DATA ((unsigned int) 0xFFFF << 0) /* (EMAC) */ @@ -471,9 +471,9 @@ typedef struct _AT91S_EMAC #define AT91C_EMAC_HIGH ((unsigned int) 0x1 << 30) /* (EMAC) */ #define AT91C_EMAC_LOW ((unsigned int) 0x1 << 31) /* (EMAC) */ -/******************************************************************************/ -/* SOFTWARE API DEFINITION FOR Serial Parallel Interface */ -/******************************************************************************/ +/*****************************************************************************/ +/* SOFTWARE API DEFINITION FOR Serial Parallel Interface */ +/*****************************************************************************/ typedef struct _AT91S_SPI { AT91_REG SPI_CR; /* Control Register */ @@ -536,7 +536,7 @@ typedef struct _AT91S_SPI #define AT91C_SPI_SPIENS ((unsigned int) 0x1 << 16) /* (SPI) Enable Status */ /* -------- SPI_IER : (SPI Offset: 0x14) Interrupt Enable Register -------- */ -/* -------- SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register -------- */ +/* -------- SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register ------- */ /* -------- SPI_IMR : (SPI Offset: 0x1c) Interrupt Mask Register -------- */ /* -------- SPI_CSR : (SPI Offset: 0x30) Chip Select Register -------- */ #define AT91C_SPI_CPOL ((unsigned int) 0x1 << 0) /* (SPI) Clock Polarity */ @@ -555,9 +555,9 @@ typedef struct _AT91S_SPI #define AT91C_SPI_DLYBS ((unsigned int) 0xFF << 16) /* (SPI) Serial Clock Baud Rate */ #define AT91C_SPI_DLYBCT ((unsigned int) 0xFF << 24) /* (SPI) Delay Between Consecutive Transfers */ -/******************************************************************************/ -/* SOFTWARE API DEFINITION FOR Peripheral Data Controller */ -/******************************************************************************/ +/*****************************************************************************/ +/* SOFTWARE API DEFINITION FOR Peripheral Data Controller */ +/*****************************************************************************/ typedef struct _AT91S_PDC { AT91_REG PDC_RPR; /* Receive Pointer Register */ @@ -692,11 +692,15 @@ typedef struct _AT91S_PDC #define AT91C_PIO_PA7 ((unsigned int) 1 << 7) /* Pin Controlled by PA7 */ #define AT91C_PA7_ETXCK_EREFCK ((unsigned int) AT91C_PIO_PA7) /* Ethernet MAC Transmit Clock/Reference Clock */ +#define AT91C_PIO_PB0 ((unsigned int) 1 << 0) /* Pin Controlled by PB3 */ +#define AT91C_PIO_PB1 ((unsigned int) 1 << 1) /* Pin Controlled by PB3 */ +#define AT91C_PIO_PB2 ((unsigned int) 1 << 2) /* Pin Controlled by PB3 */ #define AT91C_PIO_PB3 ((unsigned int) 1 << 3) /* Pin Controlled by PB3 */ #define AT91C_PIO_PB4 ((unsigned int) 1 << 4) /* Pin Controlled by PB4 */ #define AT91C_PIO_PB5 ((unsigned int) 1 << 5) /* Pin Controlled by PB5 */ #define AT91C_PIO_PB6 ((unsigned int) 1 << 6) /* Pin Controlled by PB6 */ #define AT91C_PIO_PB7 ((unsigned int) 1 << 7) /* Pin Controlled by PB7 */ +#define AT91C_PIO_PB22 ((unsigned int) 1 << 22) /* Pin Controlled by PB22 */ #define AT91C_PIO_PB25 ((unsigned int) 1 << 25) /* Pin Controlled by PB25 */ #define AT91C_PB25_DSR1 ((unsigned int) AT91C_PIO_PB25) /* USART 1 Data Set ready */ #define AT91C_PB25_EF100 ((unsigned int) AT91C_PIO_PB25) /* Ethernet MAC Force 100 Mbits */ @@ -737,19 +741,36 @@ typedef struct _AT91S_PDC #define AT91C_PIOC_CODR ((AT91_REG *) 0xFFFFF834) /* (PIOC) Clear Output Data Register */ #define AT91C_PIOC_PDSR ((AT91_REG *) 0xFFFFF83C) /* (PIOC) Pin Data Status Register */ -#define AT91C_BASE_SPI ((AT91PS_SPI) 0xFFFE0000) /* (SPI) Base Address */ -#define AT91C_BASE_EMAC ((AT91PS_EMAC) 0xFFFBC000) /* (EMAC) Base Address */ +#define AT91C_BASE_AIC ((AT91PS_AIC) 0xFFFFF000) /* (AIC) Base Address */ +#define AT91C_BASE_DBGU ((AT91PS_DBGU) 0xFFFFF200) /* (DBGU) Base Address */ +#define AT91C_BASE_PIOA ((AT91PS_PIO) 0xFFFFF400) /* (PIOA) Base Address */ +#define AT91C_BASE_PIOB ((AT91PS_PIO) 0xFFFFF600) /* (PIOB) Base Address */ +#define AT91C_BASE_PIOC ((AT91PS_PIO) 0xFFFFF800) /* (PIOC) Base Address */ +#define AT91C_BASE_PIOD ((AT91PS_PIO) 0xFFFFFA00) /* (PIOC) Base Address */ #define AT91C_BASE_PMC ((AT91PS_PMC) 0xFFFFFC00) /* (PMC) Base Address */ +#if 0 +#define AT91C_BASE_ST ((AT91PS_ST) 0xFFFFFD00) /* (PMC) Base Address */ +#define AT91C_BASE_RTC ((AT91PS_RTC) 0xFFFFFE00) /* (PMC) Base Address */ +#define AT91C_BASE_MC ((AT91PS_MC) 0xFFFFFF00) /* (PMC) Base Address */ +#endif + #define AT91C_BASE_TC0 ((AT91PS_TC) 0xFFFA0000) /* (TC0) Base Address */ -#define AT91C_BASE_DBGU ((AT91PS_DBGU) 0xFFFFF200) /* (DBGU) Base Address */ +#define AT91C_BASE_TC1 ((AT91PS_TC) 0xFFFA4000) /* (TC0) Base Address */ +#if 0 +#define AT91C_BASE_UDP ((AT91PS_UDP) 0xFFFB0000) /* (TC0) Base Address */ +#define AT91C_BASE_MCI ((AT91PS_MCI) 0xFFFB4000) /* (TC0) Base Address */ +#define AT91C_BASE_TWI ((AT91PS_TWI) 0xFFFB8000) /* (TC0) Base Address */ +#endif +#define AT91C_BASE_EMAC ((AT91PS_EMAC) 0xFFFBC000) /* (EMAC) Base Address */ +#define AT91C_BASE_US0 ((AT91PS_USART) 0xFFFC0000) /* (US0) Base Address */ +#define AT91C_BASE_US1 ((AT91PS_USART) 0xFFFC4000) /* (US1) Base Address */ +#define AT91C_BASE_US2 ((AT91PS_USART) 0xFFFC8000) /* (US1) Base Address */ +#define AT91C_BASE_US3 ((AT91PS_USART) 0xFFFCC000) /* (US1) Base Address */ +#define AT91C_BASE_SPI ((AT91PS_SPI) 0xFFFE0000) /* (SPI) Base Address */ + #define AT91C_BASE_CKGR ((AT91PS_CKGR) 0xFFFFFC20) /* (CKGR) Base Address */ -#define AT91C_BASE_PIOC ((AT91PS_PIO) 0xFFFFF800) /* (PIOC) Base Address */ -#define AT91C_BASE_PIOB ((AT91PS_PIO) 0xFFFFF600) /* (PIOB) Base Address */ -#define AT91C_BASE_PIOA ((AT91PS_PIO) 0xFFFFF400) /* (PIOA) Base Address */ #define AT91C_EBI_CSA ((AT91_REG *) 0xFFFFFF60) /* (EBI) Chip Select Assignment Register */ #define AT91C_BASE_SMC2 ((AT91PS_SMC2) 0xFFFFFF70) /* (SMC2) Base Address */ -#define AT91C_BASE_US0 ((AT91PS_USART) 0xFFFC0000) /* (US0) Base Address */ -#define AT91C_BASE_US1 ((AT91PS_USART) 0xFFFC4000) /* (US1) Base Address */ #define AT91C_TCB0_BMR ((AT91_REG *) 0xFFFA00C4) /* (TCB0) TC Block Mode Register */ #define AT91C_TCB0_BCR ((AT91_REG *) 0xFFFA00C0) /* (TCB0) TC Block Control Register */ #define AT91C_PIOC_PDR ((AT91_REG *) 0xFFFFF804) /* (PIOC) PIO Disable Register */ diff --git a/include/asm-arm/mach-types.h b/include/asm-arm/mach-types.h index 7d7888ed8c7..f6a5b4f1611 100644 --- a/include/asm-arm/mach-types.h +++ b/include/asm-arm/mach-types.h @@ -736,7 +736,11 @@ extern unsigned int __machine_arch_type; #define MACH_TYPE_LN2410SBC 725 #define MACH_TYPE_CB3RUFC 726 #define MACH_TYPE_MP2USB 727 +#define MACH_TYPE_AT91SAM9261EK 848 #define MACH_TYPE_PDNB3 1002 +#define MACH_TYPE_AT91SAM9260EK 1099 +#define MACH_TYPE_AT91RM9200DF 1119 +#define MACH_TYPE_AT91SAM9263EK 1202 #ifdef CONFIG_ARCH_EBSA110 # ifdef machine_arch_type @@ -9402,6 +9406,71 @@ extern unsigned int __machine_arch_type; # define machine_is_mp2usb() (0) #endif +#ifdef CONFIG_MACH_AT91SAM9261EK +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_AT91SAM9261EK +# endif +# define machine_is_at91sam9261ek() \ + (machine_arch_type == MACH_TYPE_AT91SAM9261EK) +#else +# define machine_is_at91sam9261ek() (0) +#endif + +#ifdef CONFIG_MACH_AT91SAM9260EK +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_AT91SAM9260EK +# endif +# define machine_is_at91sam9260ek() \ + (machine_arch_type == MACH_TYPE_AT91SAM9260EK) +#else +# define machine_is_at91sam9260ek() (0) +#endif + +#ifdef CONFIG_MACH_AT91SAM9263EK +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_AT91SAM9263EK +# endif +# define machine_is_at91sam9263ek() \ + (machine_arch_type == MACH_TYPE_AT91SAM9263EK) +#else +# define machine_is_at91sam9263ek() (0) +#endif + +#ifdef CONFIG_MACH_AT91RM9200DF +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_AT91RM9200DF +# endif +# define machine_is_at91rm9200df() \ + (machine_arch_type == MACH_TYPE_AT91RM9200DF) +#else +# define machine_is_at91rm9200df() (0) +#endif + +#ifdef CONFIG_MACH_AT91SAM9263EK +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_AT91SAM9263EK +# endif +# define machine_is_at91sam9263ek() \ + (machine_arch_type == MACH_TYPE_AT91SAM9263EK) +#else +# define machine_is_at91sam9263ek() (0) +#endif + /* * These have not yet been registered */ diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h index 14801b565c0..3d91e99b97f 100644 --- a/include/config_cmd_all.h +++ b/include/config_cmd_all.h @@ -76,5 +76,6 @@ #define CONFIG_CMD_USB /* USB Support */ #define CONFIG_CMD_VFD /* VFD support (TRAB) */ #define CONFIG_CMD_XIMG /* Load part of Multi Image */ +#define CONFIG_CMD_MUX /* AT91 MMC/SPI Mux Support */ #endif /* _CONFIG_CMD_ALL_H */ diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h index ecfa21d8280..a65c5f3422f 100644 --- a/include/configs/at91rm9200dk.h +++ b/include/configs/at91rm9200dk.h @@ -163,6 +163,11 @@ #define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_AT91C_USE_RMII +/* AC Characteristics */ +/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */ +#define DATAFLASH_TCSS (0xC << 16) +#define DATAFLASH_TCHS (0x1 << 24) + #define CONFIG_HAS_DATAFLASH 1 #define CFG_SPI_WRITE_TOUT (5*CFG_HZ) #define CFG_MAX_DATAFLASH_BANKS 2 diff --git a/include/dataflash.h b/include/dataflash.h index 650454e7ee5..c597e69f17d 100644 --- a/include/dataflash.h +++ b/include/dataflash.h @@ -38,13 +38,47 @@ #include "config.h" /*number of protected area*/ -#define NB_DATAFLASH_AREA 4 +#ifdef CONFIG_NEW_PARTITION +# define NB_DATAFLASH_AREA 6 +#else +# define NB_DATAFLASH_AREA 4 +#endif + +#ifdef CFG_NO_FLASH + +/*----------------------------------------------------------------------- + * return codes from flash_write(): + */ +# define ERR_OK 0 +# define ERR_TIMOUT 1 +# define ERR_NOT_ERASED 2 +# define ERR_PROTECTED 4 +# define ERR_INVAL 8 +# define ERR_ALIGN 16 +# define ERR_UNKNOWN_FLASH_VENDOR 32 +# define ERR_UNKNOWN_FLASH_TYPE 64 +# define ERR_PROG_ERROR 128 + +/*----------------------------------------------------------------------- + * Protection Flags for flash_protect(): + */ +# define FLAG_PROTECT_SET 0x01 +# define FLAG_PROTECT_CLEAR 0x02 +# define FLAG_PROTECT_INVALID 0x03 + +/*----------------------------------------------------------------------- + * Set Environment according to label: + */ +# define FLAG_SETENV 0x80 +#endif /* CFG_NO_FLASH */ /*define the area structure*/ typedef struct { unsigned long start; unsigned long end; unsigned char protected; + unsigned char setenv; + unsigned char label[20]; } dataflash_protect_t; typedef unsigned int AT91S_DataFlashStatus; @@ -96,6 +130,7 @@ typedef struct _AT91S_DATAFLASH_INFO { AT91S_DataflashDesc Desc; AT91S_DataflashFeatures Device; /* Pointer on a dataflash features array */ unsigned long logical_address; + unsigned long end_address; unsigned int id; /* device id */ } AT91S_DATAFLASH_INFO, *AT91PS_DATAFLASH_INFO; @@ -106,6 +141,7 @@ typedef struct _AT91S_DATAFLASH_INFO { #define AT45DB321 0x34 #define AT45DB642 0x3c #define AT45DB128 0x10 +#define PAGES_PER_BLOCK 8 #define AT91C_DATAFLASH_TIMEOUT 10000 /* For AT91F_DataFlashWaitReady */ @@ -168,6 +204,7 @@ typedef struct _AT91S_DATAFLASH_INFO { extern int size_dataflash (AT91PS_DataFlash pdataFlash, unsigned long addr, unsigned long size); extern int prot_dataflash (AT91PS_DataFlash pdataFlash, unsigned long addr); +extern int addr2ram(ulong addr); extern int dataflash_real_protect (int flag, unsigned long start_addr, unsigned long end_addr); extern int addr_dataflash (unsigned long addr); extern int read_dataflash (unsigned long addr, unsigned long size, char *result); @@ -175,4 +212,8 @@ extern int write_dataflash (unsigned long addr, unsigned long dest, unsigned lon extern void dataflash_print_info (void); extern void dataflash_perror (int err); +#ifdef CONFIG_NEW_DF_PARTITION +extern int AT91F_DataflashSetEnv (void); #endif +#endif + #endif diff --git a/include/dm9161.h b/include/dm9161.h index f5bfb1960d4..d5d0e8d3ab0 100644 --- a/include/dm9161.h +++ b/include/dm9161.h @@ -43,9 +43,9 @@ #define DM9161_COLLISION_TEST (1 << 7) /*--Bit definitions: DM9161_BMSR */ -#define DM9161_100BASE_T4 (1 << 15) +#define DM9161_100BASE_TX (1 << 15) #define DM9161_100BASE_TX_FD (1 << 14) -#define DM9161_100BASE_T4_HD (1 << 13) +#define DM9161_100BASE_TX_HD (1 << 13) #define DM9161_10BASE_T_FD (1 << 12) #define DM9161_10BASE_T_HD (1 << 11) #define DM9161_MF_PREAMB_SUPPR (1 << 6) diff --git a/include/flash.h b/include/flash.h index 43b9c6bdca6..b0bf733f18d 100644 --- a/include/flash.h +++ b/include/flash.h @@ -119,6 +119,11 @@ extern void flash_read_factory_serial(flash_info_t * info, void * buffer, int of */ #define FLAG_PROTECT_SET 0x01 #define FLAG_PROTECT_CLEAR 0x02 +#define FLAG_PROTECT_INVALID 0x03 +/*----------------------------------------------------------------------- + * Set Environment according to label: + */ +#define FLAG_SETENV 0x80 /*----------------------------------------------------------------------- * Device IDs -- cgit v1.3.1 From 779e975117a75e91fcebe226a63104dbfb924ab1 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 14 Aug 2007 14:44:41 +0200 Subject: ppc4xx: Add initial Zeus (PPC405EP) board support Signed-off-by: Stefan Roese --- MAINTAINERS | 1 + MAKEALL | 2 +- Makefile | 3 + board/amcc/bubinga/bubinga.c | 13 +- board/amcc/taihu/taihu.c | 6 + board/zeus/Makefile | 51 +++++ board/zeus/config.mk | 24 ++ board/zeus/u-boot.lds | 133 +++++++++++ board/zeus/update.c | 105 +++++++++ board/zeus/zeus.c | 511 +++++++++++++++++++++++++++++++++++++++++++ cpu/ppc4xx/sdram.c | 27 ++- cpu/ppc4xx/sdram.h | 2 - cpu/ppc4xx/start.S | 48 ++-- doc/README.zeus | 73 +++++++ include/configs/zeus.h | 375 +++++++++++++++++++++++++++++++ include/ppc405.h | 14 ++ 16 files changed, 1344 insertions(+), 44 deletions(-) create mode 100644 board/zeus/Makefile create mode 100644 board/zeus/config.mk create mode 100644 board/zeus/u-boot.lds create mode 100644 board/zeus/update.c create mode 100644 board/zeus/zeus.c create mode 100644 doc/README.zeus create mode 100644 include/configs/zeus.h (limited to 'include/configs') diff --git a/MAINTAINERS b/MAINTAINERS index 6dd43f86195..853afeb4d36 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -293,6 +293,7 @@ Stefan Roese walnut PPC405GP yellowstone PPC440GR yosemite PPC440EP + zeus PPC405EP P3M750 PPC750FX/GX/GL diff --git a/MAKEALL b/MAKEALL index f69134a63ea..00cb6b5351c 100755 --- a/MAKEALL +++ b/MAKEALL @@ -91,7 +91,7 @@ LIST_4xx=" \ sc3 sequoia sequoia_nand taihu \ taishan VOH405 VOM405 W7OLMC \ W7OLMG walnut WUH405 XPEDITE1K \ - yellowstone yosemite yucca \ + yellowstone yosemite yucca zeus \ " ######################################################################### diff --git a/Makefile b/Makefile index d4fd34e43f9..d75f8fdddb8 100644 --- a/Makefile +++ b/Makefile @@ -1294,6 +1294,9 @@ yellowstone_config: unconfig yucca_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx yucca amcc +zeus_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc ppc4xx zeus + ######################################################################### ## MPC8220 Systems ######################################################################### diff --git a/board/amcc/bubinga/bubinga.c b/board/amcc/bubinga/bubinga.c index fe6ce8a6d13..66e7509da89 100644 --- a/board/amcc/bubinga/bubinga.c +++ b/board/amcc/bubinga/bubinga.c @@ -20,10 +20,12 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ -long int spd_sdram(void); #include #include +#include + +long int spd_sdram(void); int board_early_init_f(void) { @@ -34,6 +36,15 @@ int board_early_init_f(void) mtdcr(uictr, 0x00000010); /* set int trigger levels */ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + /* + * Configure CPC0_PCI to enable PerWE as output + * and enable the internal PCI arbiter if selected + */ + if (in_8((void *)FPGA_REG1) & FPGA_REG1_PCI_INT_ARB) + mtdcr(cpc0_pci, CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN); + else + mtdcr(cpc0_pci, CPC0_PCI_HOST_CFG_EN); + return 0; } diff --git a/board/amcc/taihu/taihu.c b/board/amcc/taihu/taihu.c index ee9d3b5446f..ea83671988a 100644 --- a/board/amcc/taihu/taihu.c +++ b/board/amcc/taihu/taihu.c @@ -50,6 +50,12 @@ int board_early_init_f(void) mtebc(pb3ap, CFG_EBC_PB3AP); /* memory bank 3 (CPLD_LCM) initialization */ mtebc(pb3cr, CFG_EBC_PB3CR); + /* + * Configure CPC0_PCI to enable PerWE as output + * and enable the internal PCI arbiter + */ + mtdcr(cpc0_pci, CPC0_PCI_SPE | CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN); + return 0; } diff --git a/board/zeus/Makefile b/board/zeus/Makefile new file mode 100644 index 00000000000..f0d4e9f3f42 --- /dev/null +++ b/board/zeus/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2007 +# Stefan Roese, DENX Software Engineering, sr@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o update.o +SOBJS = + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/zeus/config.mk b/board/zeus/config.mk new file mode 100644 index 00000000000..1bdf5e4fcf3 --- /dev/null +++ b/board/zeus/config.mk @@ -0,0 +1,24 @@ +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0xFFFC0000 diff --git a/board/zeus/u-boot.lds b/board/zeus/u-boot.lds new file mode 100644 index 00000000000..73b83eba40e --- /dev/null +++ b/board/zeus/u-boot.lds @@ -0,0 +1,133 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + .resetvec 0xFFFFFFFC : + { + *(.resetvec) + } = 0xffff + + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/ppc4xx/start.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/zeus/update.c b/board/zeus/update.c new file mode 100644 index 00000000000..c76519f094f --- /dev/null +++ b/board/zeus/update.c @@ -0,0 +1,105 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +#if defined(CONFIG_ZEUS) + +u8 buf_zeus_ce[] = { +/*00 01 02 03 04 05 06 07 */ + 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +/*08 09 0a 0b 0c 0d 0e 0f */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +/*10 11 12 13 14 15 16 17 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +/*18 19 1a 1b 1c 1d 1e 1f */ + 0x00, 0xc0, 0x50, 0x12, 0x72, 0x3e, 0x00, 0x00 }; + +u8 buf_zeus_pe[] = { + +/* CPU_CLOCK_DIV 1 = 00 + CPU_PLB_FREQ_DIV 3 = 10 + OPB_PLB_FREQ_DIV 2 = 01 + EBC_PLB_FREQ_DIV 2 = 00 + MAL_PLB_FREQ_DIV 1 = 00 + PCI_PLB_FRQ_DIV 3 = 10 + PLL_PLLOUTA = IS SET + PLL_OPERATING = IS NOT SET + PLL_FDB_MUL 10 = 1010 + PLL_FWD_DIV_A 3 = 101 + PLL_FWD_DIV_B 3 = 101 + TUNE = 0x2be */ +/*00 01 02 03 04 05 06 07 */ + 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +/*08 09 0a 0b 0c 0d 0e 0f */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +/*10 11 12 13 14 15 16 17 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +/*18 19 1a 1b 1c 1d 1e 1f */ + 0x00, 0x60, 0x68, 0x2d, 0x42, 0xbe, 0x00, 0x00 }; + +static int update_boot_eeprom(void) +{ + u32 len = 0x20; + u8 chip = CFG_I2C_EEPROM_ADDR; + u8 *pbuf; + u8 base; + int i; + + if (in_be32((void *)GPIO0_IR) & GPIO_VAL(CFG_GPIO_ZEUS_PE)) { + pbuf = buf_zeus_pe; + base = 0x40; + } else { + pbuf = buf_zeus_ce; + base = 0x00; + } + + for (i = 0; i < len; i++, base++) { + if (i2c_write(chip, base, 1, &pbuf[i], 1) != 0) { + printf("i2c_write fail\n"); + return 1; + } + udelay(11000); + } + + return 0; +} + +int do_update_boot_eeprom(cmd_tbl_t* cmdtp, int flag, int argc, char* argv[]) +{ + return update_boot_eeprom(); +} + +U_BOOT_CMD ( + update_boot_eeprom, 1, 1, do_update_boot_eeprom, + "update_boot_eeprom - update boot eeprom content\n", + NULL +); + +#endif diff --git a/board/zeus/zeus.c b/board/zeus/zeus.c new file mode 100644 index 00000000000..4ab853f8f56 --- /dev/null +++ b/board/zeus/zeus.c @@ -0,0 +1,511 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#define REBOOT_MAGIC 0x07081967 +#define REBOOT_NOP 0x00000000 +#define REBOOT_DO_POST 0x00000001 + +extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ +extern env_t *env_ptr; +extern uchar default_environment[]; + +ulong flash_get_size(ulong base, int banknum); +void env_crc_update(void); +int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); + +static u32 start_time; + +int board_early_init_f(void) +{ + mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(uicer, 0x00000000); /* disable all ints */ + mtdcr(uiccr, 0x00000000); + mtdcr(uicpr, 0xFFFF7F00); /* set int polarities */ + mtdcr(uictr, 0x00000000); /* set int trigger levels */ + mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */ + + /* + * Configure CPC0_PCI to enable PerWE as output + */ + mtdcr(cpc0_pci, CPC0_PCI_SPE); + + return 0; +} + +int misc_init_r(void) +{ + u32 pbcr; + int size_val = 0; + u32 post_magic; + u32 post_val; + + post_magic = in_be32((void *)CFG_POST_MAGIC); + post_val = in_be32((void *)CFG_POST_VAL); + if ((post_magic == REBOOT_MAGIC) && (post_val == REBOOT_DO_POST)) { + /* + * Set special bootline bootparameter to pass this POST boot + * mode to Linux to reset the username/password + */ + setenv("addmisc", "setenv bootargs \\${bootargs} factory_reset=yes"); + + /* + * Normally don't run POST tests, only when enabled + * via the sw-reset button. So disable further tests + * upon next bootup here. + */ + out_be32((void *)CFG_POST_VAL, REBOOT_NOP); + } else { + /* + * Only run POST when initiated via the sw-reset button mechanism + */ + post_word_store(0); + } + + /* + * Get current time + */ + start_time = get_timer(0); + + /* + * FLASH stuff... + */ + + /* Re-do sizing to get full correct info */ + + /* adjust flash start and offset */ + mfebc(pb0cr, pbcr); + switch (gd->bd->bi_flashsize) { + case 1 << 20: + size_val = 0; + break; + case 2 << 20: + size_val = 1; + break; + case 4 << 20: + size_val = 2; + break; + case 8 << 20: + size_val = 3; + break; + case 16 << 20: + size_val = 4; + break; + case 32 << 20: + size_val = 5; + break; + case 64 << 20: + size_val = 6; + break; + case 128 << 20: + size_val = 7; + break; + } + pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17); + mtebc(pb0cr, pbcr); + + /* + * Re-check to get correct base address + */ + flash_get_size(gd->bd->bi_flashstart, 0); + + /* Monitor protection ON by default */ + (void)flash_protect(FLAG_PROTECT_SET, + -CFG_MONITOR_LEN, + 0xffffffff, + &flash_info[0]); + + /* Env protection ON by default */ + (void)flash_protect(FLAG_PROTECT_SET, + CFG_ENV_ADDR_REDUND, + CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1, + &flash_info[0]); + + return 0; +} + +/* + * Check Board Identity: + */ +int checkboard(void) +{ + char *s = getenv("serial#"); + + puts("Board: Zeus-"); + + if (in_be32((void *)GPIO0_IR) & GPIO_VAL(CFG_GPIO_ZEUS_PE)) + puts("PE"); + else + puts("CE"); + + puts(" of BulletEndPoint"); + + if (s != NULL) { + puts(", serial# "); + puts(s); + } + putc('\n'); + + /* both LED's off */ + gpio_write_bit(CFG_GPIO_LED_RED, 0); + gpio_write_bit(CFG_GPIO_LED_GREEN, 0); + udelay(10000); + /* and on again */ + gpio_write_bit(CFG_GPIO_LED_RED, 1); + gpio_write_bit(CFG_GPIO_LED_GREEN, 1); + + return (0); +} + +static u32 detect_sdram_size(void) +{ + u32 val; + u32 size; + + mfsdram(mem_mb0cf, val); + size = (4 << 20) << ((val & 0x000e0000) >> 17); + + /* + * Check if 2nd bank is enabled too + */ + mfsdram(mem_mb1cf, val); + if (val & 1) + size += (4 << 20) << ((val & 0x000e0000) >> 17); + + return size; +} + +long int initdram (int board_type) +{ + return detect_sdram_size(); +} + +#if defined(CFG_DRAM_TEST) +int testdram(void) +{ + unsigned long *mem = (unsigned long *)0; + const unsigned long kend = (1024 / sizeof(unsigned long)); + unsigned long k, n; + unsigned long msr; + unsigned long total_kbytes; + + total_kbytes = detect_sdram_size(); + + msr = mfmsr(); + mtmsr(msr & ~(MSR_EE)); + + for (k = 0; k < total_kbytes ; + ++k, mem += (1024 / sizeof(unsigned long))) { + if ((k & 1023) == 0) { + printf("%3d MB\r", k / 1024); + } + + memset(mem, 0xaaaaaaaa, 1024); + for (n = 0; n < kend; ++n) { + if (mem[n] != 0xaaaaaaaa) { + printf("SDRAM test fails at: %08x\n", + (uint) & mem[n]); + return 1; + } + } + + memset(mem, 0x55555555, 1024); + for (n = 0; n < kend; ++n) { + if (mem[n] != 0x55555555) { + printf("SDRAM test fails at: %08x\n", + (uint) & mem[n]); + return 1; + } + } + } + printf("SDRAM test passes\n"); + mtmsr(msr); + + return 0; +} +#endif + +static int default_env_var(char *buf, char *var) +{ + char *ptr; + char *val; + + /* + * Find env variable + */ + ptr = strstr(buf + 4, var); + if (ptr == NULL) { + printf("ERROR: %s not found!\n", var); + return -1; + } + ptr += strlen(var) + 1; + + /* + * Now the ethaddr needs to be updated in the "normal" + * environment storage -> redundant flash. + */ + val = ptr; + setenv(var, val); + printf("Updated %s from eeprom to %s!\n", var, val); + + return 0; +} + +static int restore_default(void) +{ + char *buf; + char *buf_save; + u32 crc; + + /* + * Unprotect and erase environment area + */ + flash_protect(FLAG_PROTECT_CLEAR, + CFG_ENV_ADDR_REDUND, + CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1, + &flash_info[0]); + + flash_sect_erase(CFG_ENV_ADDR_REDUND, + CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1); + + /* + * Now restore default environment from U-Boot image + * -> ipaddr, serverip... + */ + memset(env_ptr, 0, sizeof(env_t)); + memcpy(env_ptr->data, default_environment, ENV_SIZE); +#ifdef CFG_REDUNDAND_ENVIRONMENT + env_ptr->flags = 0xFF; +#endif + env_crc_update(); + gd->env_valid = 1; + + /* + * Read board specific values from I2C EEPROM + * and set env variables accordingly + * -> ethaddr, eth1addr, serial# + */ + buf = buf_save = malloc(FACTORY_RESET_ENV_SIZE); + if (eeprom_read(FACTORY_RESET_I2C_EEPROM, FACTORY_RESET_ENV_OFFS, + (u8 *)buf, FACTORY_RESET_ENV_SIZE)) { + puts("\nError reading EEPROM!\n"); + } else { + crc = crc32(0, (u8 *)(buf + 4), FACTORY_RESET_ENV_SIZE - 4); + if (crc != *(u32 *)buf) { + printf("ERROR: crc mismatch %08lx %08lx\n", crc, *(u32 *)buf); + return -1; + } + + default_env_var(buf, "ethaddr"); + buf += 8 + 18; + default_env_var(buf, "eth1addr"); + buf += 9 + 18; + default_env_var(buf, "serial#"); + } + + /* + * Finally save updated env variables back to flash + */ + saveenv(); + + free(buf_save); + + return 0; +} + +int do_set_default(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + char *buf; + char *buf_save; + char str[32]; + u32 crc; + char var[32]; + + if (argc < 4) { + puts("ERROR!\n"); + return -1; + } + + buf = buf_save = malloc(FACTORY_RESET_ENV_SIZE); + memset(buf, 0, FACTORY_RESET_ENV_SIZE); + + strcpy(var, "ethaddr"); + printf("Setting %s to %s\n", var, argv[1]); + sprintf(str, "%s=%s", var, argv[1]); + strcpy(buf + 4, str); + buf += strlen(str) + 1; + + strcpy(var, "eth1addr"); + printf("Setting %s to %s\n", var, argv[2]); + sprintf(str, "%s=%s", var, argv[2]); + strcpy(buf + 4, str); + buf += strlen(str) + 1; + + strcpy(var, "serial#"); + printf("Setting %s to %s\n", var, argv[3]); + sprintf(str, "%s=%s", var, argv[3]); + strcpy(buf + 4, str); + + crc = crc32(0, (u8 *)(buf_save + 4), FACTORY_RESET_ENV_SIZE - 4); + *(u32 *)buf_save = crc; + + if (eeprom_write(FACTORY_RESET_I2C_EEPROM, FACTORY_RESET_ENV_OFFS, + (u8 *)buf_save, FACTORY_RESET_ENV_SIZE)) { + puts("\nError writing EEPROM!\n"); + return -1; + } + + free(buf_save); + + return 0; +} + +U_BOOT_CMD( + setdef, 4, 1, do_set_default, + "setdef - write board-specific values to EEPROM (ethaddr...)\n", + "ethaddr eth1addr serial#\n - write board-specific values to EEPROM\n" + ); + +static inline int sw_reset_pressed(void) +{ + return !(in_be32((void *)GPIO0_IR) & GPIO_VAL(CFG_GPIO_SW_RESET)); +} + +int do_chkreset(cmd_tbl_t* cmdtp, int flag, int argc, char* argv[]) +{ + int delta; + int count = 0; + int post = 0; + int factory_reset = 0; + + if (!sw_reset_pressed()) { + printf("SW-Reset already high (Button released)\n"); + printf("-> No action taken!\n"); + return 0; + } + + printf("Waiting for SW-Reset button to be released."); + + while (1) { + delta = get_timer(start_time); + if (!sw_reset_pressed()) + break; + + if ((delta > CFG_TIME_POST) && !post) { + printf("\nWhen released now, POST tests will be started."); + gpio_write_bit(CFG_GPIO_LED_GREEN, 0); + post = 1; + } + + if ((delta > CFG_TIME_FACTORY_RESET) && !factory_reset) { + printf("\nWhen released now, factory default values" + " will be restored."); + gpio_write_bit(CFG_GPIO_LED_RED, 0); + factory_reset = 1; + } + + udelay(1000); + if (!(count++ % 1000)) + printf("."); + } + + + printf("\nSW-Reset Button released after %d milli-seconds!\n", delta); + + if (delta > CFG_TIME_FACTORY_RESET) { + printf("Starting factory reset value restoration...\n"); + + /* + * Restore default setting + */ + restore_default(); + + /* + * Reset the board for default to become valid + */ + do_reset(NULL, 0, 0, NULL); + + return 0; + } + + if (delta > CFG_TIME_POST) { + printf("Starting POST configuration...\n"); + + /* + * Enable POST upon next bootup + */ + out_be32((void *)CFG_POST_MAGIC, REBOOT_MAGIC); + out_be32((void *)CFG_POST_VAL, REBOOT_DO_POST); + post_bootmode_init(); + + /* + * Reset the logbuffer for a clean start + */ + logbuff_reset(); + + do_reset(NULL, 0, 0, NULL); + + return 0; + } + + return 0; +} + +U_BOOT_CMD ( + chkreset, 1, 1, do_chkreset, + "chkreset- Check for status of SW-reset button and act accordingly\n", + NULL +); + +#if defined(CONFIG_POST) +/* + * Returns 1 if keys pressed to start the power-on long-running tests + * Called from board_init_f(). + */ +int post_hotkeys_pressed(void) +{ + u32 post_magic; + u32 post_val; + + post_magic = in_be32((void *)CFG_POST_MAGIC); + post_val = in_be32((void *)CFG_POST_VAL); + + if ((post_magic == REBOOT_MAGIC) && (post_val == REBOOT_DO_POST)) + return 1; + else + return 0; +} +#endif /* CONFIG_POST */ diff --git a/cpu/ppc4xx/sdram.c b/cpu/ppc4xx/sdram.c index 3a0ca17d9fe..2724d91f0f1 100644 --- a/cpu/ppc4xx/sdram.c +++ b/cpu/ppc4xx/sdram.c @@ -187,14 +187,14 @@ void sdram_init(void) /* * Disable memory controller. */ - mtsdram0(mem_mcopt1, 0x00000000); + mtsdram(mem_mcopt1, 0x00000000); /* * Set MB0CF for bank 0. */ - mtsdram0(mem_mb0cf, mb0cf[i].reg); - mtsdram0(mem_sdtr1, sdtr1); - mtsdram0(mem_rtr, compute_rtr(speed, mb0cf[i].rows, 64)); + mtsdram(mem_mb0cf, mb0cf[i].reg); + mtsdram(mem_sdtr1, sdtr1); + mtsdram(mem_rtr, compute_rtr(speed, mb0cf[i].rows, 64)); udelay(200); @@ -203,7 +203,7 @@ void sdram_init(void) * Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst * read/prefetch. */ - mtsdram0(mem_mcopt1, 0x80800000); + mtsdram(mem_mcopt1, 0x80800000); udelay(10000); @@ -215,10 +215,21 @@ void sdram_init(void) #ifdef CONFIG_SDRAM_BANK1 u32 b1cr = mb0cf[i].size | mb0cf[i].reg; - mtsdram0(mem_mcopt1, 0x00000000); - mtsdram0(mem_mb1cf, b1cr); /* SDRAM0_B1CR */ - mtsdram0(mem_mcopt1, 0x80800000); + mtsdram(mem_mcopt1, 0x00000000); + mtsdram(mem_mb1cf, b1cr); /* SDRAM0_B1CR */ + mtsdram(mem_mcopt1, 0x80800000); udelay(10000); + + /* + * Check if 2nd bank is really available. + * If the size not equal to the size of the first + * bank, then disable the 2nd bank completely. + */ + if (get_ram_size((long *)mb0cf[i].size, mb0cf[i].size) != + mb0cf[i].size) { + mtsdram(mem_mb1cf, 0); + mtsdram(mem_mcopt1, 0); + } #endif return; } diff --git a/cpu/ppc4xx/sdram.h b/cpu/ppc4xx/sdram.h index 62b5442f3ba..4fb9b1ae14e 100644 --- a/cpu/ppc4xx/sdram.h +++ b/cpu/ppc4xx/sdram.h @@ -29,8 +29,6 @@ #include -#define mtsdram0(reg, data) mtdcr(memcfga,reg);mtdcr(memcfgd,data) - #define ONE_BILLION 1000000000 struct sdram_conf_s { diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index 18d34456095..9626b65c885 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -1869,38 +1869,7 @@ ppc405ep_init: ori r3,r3,CFG_EBC_PB4CR@l mtdcr ebccfgd,r3 #endif -#ifdef CONFIG_TAIHU - mfdcr r4, CPC0_BOOT - andi. r5, r4, CPC0_BOOT_SEP@l - bne strap_0 /* serial eeprom present */ -#endif - -#ifndef CFG_CPC0_PCI - li r3,CPC0_PCI_HOST_CFG_EN -#ifdef CONFIG_BUBINGA - /* - !----------------------------------------------------------------------- - ! Check FPGA for PCI internal/external arbitration - ! If board is set to internal arbitration, update cpc0_pci - !----------------------------------------------------------------------- - */ - addis r5,r0,FPGA_REG1@h /* set offset for FPGA_REG1 */ - ori r5,r5,FPGA_REG1@l - lbz r5,0x0(r5) /* read to get PCI arb selection */ - andi. r6,r5,FPGA_REG1_PCI_INT_ARB /* using internal arbiter ?*/ - beq ..pci_cfg_set /* if not set, then bypass reg write*/ -#endif - ori r3,r3,CPC0_PCI_ARBIT_EN -#ifdef CONFIG_TAIHU - ori r3,r3,CPC0_PCI_SPE -#endif -#else /* CFG_CPC0_PCI */ - li r3,CFG_CPC0_PCI -#endif /* CFG_CPC0_PCI */ -..pci_cfg_set: - mtdcr CPC0_PCI, r3 /* Enable internal arbiter*/ -strap_0: /* !----------------------------------------------------------------------- ! Check to see if chip is in bypass mode. @@ -1966,6 +1935,21 @@ strap_0: bne _pci_66mhz #endif /* CONFIG_TAIHU */ +#if defined(CONFIG_ZEUS) + mfdcr r4, CPC0_BOOT + andi. r5, r4, CPC0_BOOT_SEP@l + bne strap_1 /* serial eeprom present */ + lis r3,0x0000 + addi r3,r3,0x3030 + lis r4,0x8042 + addi r4,r4,0x223e + b 1f +strap_1: + mfdcr r3, CPC0_PLLMR0 + mfdcr r4, CPC0_PLLMR1 + b 1f +#endif + addis r3,0,PLLMR0_DEFAULT@h /* PLLMR0 default value */ ori r3,r3,PLLMR0_DEFAULT@l /* */ addis r4,0,PLLMR1_DEFAULT@h /* PLLMR1 default value */ @@ -1982,9 +1966,9 @@ _pci_66mhz: strap_1: mfdcr r3, CPC0_PLLMR0 mfdcr r4, CPC0_PLLMR1 -1: #endif /* CONFIG_TAIHU */ +1: b pll_write /* Write the CPC0_PLLMR with new value */ pll_done: diff --git a/doc/README.zeus b/doc/README.zeus new file mode 100644 index 00000000000..1848d8cd384 --- /dev/null +++ b/doc/README.zeus @@ -0,0 +1,73 @@ + +Storage of the board specific values (ethaddr...) +------------------------------------------------- + +The board specific environment variables that should be unique +for each individual board, can be stored in the I2C EEPROM. This +will be done from offset 0x80 with the length of 0x80 bytes. The +following command can be used to store the values here: + +=> setdef de:20:6a:ed:e2:72 de:20:6a:ed:e2:73 AB0001 + + ethaddr eth1addr serial# + +Now those 3 values are stored into the I2C EEPROM. A CRC is added +to make sure that the values get not corrupted. + + +SW-Reset Pushbutton handling: +----------------------------- + +The SW-reset push button is connected to a GPIO input too. This +way U-Boot can "see" how long the SW-reset was pressed, and a +specific action can be taken. Two different actions are supported: + +a) Release after more than 5 seconds and less then 10 seconds: + -> Run POST + + Please note, that the POST test will take a while (approx. 1 min + on the 128MByte board). This is mainly due to the system memory + test. + +b) Release after more than 10 seconds: + -> Restore factory default settings + + The factory default values are restored. The default environment + variables are restored (ipaddr, serverip...) and the board + specific values (ethaddr, eth1addr and serial#) are restored + to the environment from the I2C EEPROM. Also a bootline parameter + is added to the Linux bootline to signal the Linux kernel upon + the next startup, that the factory defaults should be restored. + +The command to check this sw-reset status and act accordingly is + +=> chkreset + +This command is added to the default "bootcmd", so that it is called +automatically upon startup. + +Also, the 2 LED's are used to indicate the current status of this +command (time passed since pushing the button). When the POST test +will be run, the green LED will be switched off, and when the +factory restore will be initiated, the reg LED will be switched off. + + +Loggin of POST results: +----------------------- + +The results of the POST tests are logged in a logbuffer located at the end +of the onboard memory. It can be accessed with the U-Boot command "log": + +=> log show +<4>POST memory PASSED +<4>POST cache PASSED +<4>POST cpu PASSED +<4>POST uart PASSED +<4>POST ethernet PASSED + +The DENX Linux kernel tree has support for this log buffer included. Exactly +this buffer is used for logging of all kernel messages too. By enabling the +compile time option "CONFIG_LOGBUFFER" this support is enabled. This way you +can access the U-Boot log messages from Linux too. + +2007-08-10, Stefan Roese diff --git a/include/configs/zeus.h b/include/configs/zeus.h new file mode 100644 index 00000000000..86a16e77a5d --- /dev/null +++ b/include/configs/zeus.h @@ -0,0 +1,375 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************ + * zeus.h - configuration for Zeus board + ***********************************************************************/ +#ifndef __CONFIG_H +#define __CONFIG_H + +/*----------------------------------------------------------------------- + * High Level Configuration Options + *----------------------------------------------------------------------*/ +#define CONFIG_ZEUS 1 /* Board is Zeus */ +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_405EP 1 /* Specifc 405EP support*/ + +#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ + +#define PLLMR0_DEFAULT PLLMR0_333_111_55_111 +#define PLLMR1_DEFAULT PLLMR1_333_111_55_111 + +#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ + +#define CONFIG_OVERWRITE_ETHADDR_ONCE 1 + +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_PHY_ADDR 0x01 /* PHY address */ +#define CONFIG_HAS_ETH1 1 +#define CONFIG_PHY1_ADDR 0x11 /* EMAC1 PHY address */ +#define CONFIG_NET_MULTI 1 +#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */ +#define CONFIG_PHY_RESET 1 +#define CONFIG_PHY_RESET_DELAY 300 /* PHY RESET recovery delay */ + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_CACHE | \ + CFG_CMD_DHCP | \ + CFG_CMD_DIAG | \ + CFG_CMD_EEPROM | \ + CFG_CMD_ELF | \ + CFG_CMD_I2C | \ + CFG_CMD_IRQ | \ + CFG_CMD_LOG | \ + CFG_CMD_MII | \ + CFG_CMD_NET | \ + CFG_CMD_NFS | \ + CFG_CMD_PING | \ + CFG_CMD_REGINFO) + +/* POST support */ +#define CONFIG_POST (CFG_POST_MEMORY | \ + CFG_POST_CPU | \ + CFG_POST_CACHE | \ + CFG_POST_UART | \ + CFG_POST_ETHER) + +#define CFG_POST_ETHER_EXT_LOOPBACK /* eth POST using ext loopack connector */ + +/* Define here the base-addresses of the UARTs to test in POST */ +#define CFG_POST_UART_TABLE {UART0_BASE} + +#define CONFIG_LOGBUFFER +#define CFG_POST_CACHE_ADDR 0x00800000 /* free virtual address */ + +#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */ + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/*----------------------------------------------------------------------- + * SDRAM + *----------------------------------------------------------------------*/ +/* + * SDRAM configuration (please see cpu/ppc/sdram.[ch]) + */ +#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ +#define CONFIG_SDRAM_BANK1 1 /* init onboard SDRAM bank 1 */ + +/* SDRAM timings used in datasheet */ +#define CFG_SDRAM_CL 3 /* CAS latency */ +#define CFG_SDRAM_tRP 20 /* PRECHARGE command period */ +#define CFG_SDRAM_tRC 66 /* ACTIVE-to-ACTIVE command period */ +#define CFG_SDRAM_tRCD 20 /* ACTIVE-to-READ delay */ +#define CFG_SDRAM_tRFC 66 /* Auto refresh period */ + +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */ +#define CFG_BASE_BAUD 691200 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SERIAL_MULTI + +/* The following table includes the supported baudrates */ +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} + +/*----------------------------------------------------------------------- + * Miscellaneous configurable options + *----------------------------------------------------------------------*/ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + +/*----------------------------------------------------------------------- + * I2C + *----------------------------------------------------------------------*/ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +/* these are for the ST M24C02 2kbit serial i2c eeprom */ +#define CFG_I2C_EEPROM_ADDR 0x50 /* base address */ +#define CFG_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */ +/* mask of address bits that overflow into the "EEPROM chip address" */ +#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07 + +#define CFG_EEPROM_PAGE_WRITE_ENABLE 1 /* write eeprom in pages */ +#define CFG_EEPROM_PAGE_WRITE_BITS 3 /* 8 byte write page size */ +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ + +/* + * The layout of the I2C EEPROM, used for bootstrap setup and for board- + * specific values, like ethaddr... that can be restored via the sw-reset + * button + */ +#define FACTORY_RESET_I2C_EEPROM 0x50 +#define FACTORY_RESET_ENV_OFFS 0x80 +#define FACTORY_RESET_ENV_SIZE 0x80 + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_FLASH_BASE 0xFF000000 +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ +#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN) + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ + +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } + +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */ + +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ + +#ifdef CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ +#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#endif + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_DCACHE_SIZE 16384 /* For IBM 405EP CPU */ +#define CFG_CACHELINE_SIZE 32 /* ... */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in data cache) + */ +/* use on chip memory (OCM) for temperary stack until sdram is tested */ +#define CFG_TEMP_STACK_OCM 1 + +/* On Chip Memory location */ +#define CFG_OCM_DATA_ADDR 0xF8000000 +#define CFG_OCM_DATA_SIZE 0x1000 +#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of OCM */ +#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */ + +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +/* reserve some memory for POST and BOOT limit info */ +#define CFG_INIT_SP_OFFSET (CFG_GBL_DATA_OFFSET - 16) + +/* extra data in OCM */ +#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 4) +#define CFG_POST_MAGIC (CFG_OCM_DATA_ADDR + CFG_GBL_DATA_OFFSET - 8) +#define CFG_POST_VAL (CFG_OCM_DATA_ADDR + CFG_GBL_DATA_OFFSET - 12) + +/*----------------------------------------------------------------------- + * External Bus Controller (EBC) Setup + */ + +/* Memory Bank 0 (Flash 16M) initialization */ +#define CFG_EBC_PB0AP 0x05815600 +#define CFG_EBC_PB0CR 0xFF09A000 /* BAS=0xFF0,BS=16MB,BU=R/W,BW=16bit */ + +/*----------------------------------------------------------------------- + * Definitions for GPIO setup (PPC405EP specific) + * + * GPIO0[0] - External Bus Controller BLAST output + * GPIO0[1-9] - Instruction trace outputs + * GPIO0[10-13] - External Bus Controller CS_1 - CS_4 outputs + * GPIO0[14-16] - External Bus Controller ABUS3-ABUS5 outputs + * GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs + * GPIO0[24-27] - UART0 control signal inputs/outputs + * GPIO0[28-29] - UART1 data signal input/output + * GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs + */ +#define CFG_GPIO0_OSRH 0x15555550 /* Chip selects */ +#define CFG_GPIO0_OSRL 0x00000110 /* UART_DTR-pin 27 alt out */ +#define CFG_GPIO0_ISR1H 0x10000041 /* Pin 2, 12 is input */ +#define CFG_GPIO0_ISR1L 0x15505440 /* OUT: LEDs 22/23; IN: pin12,2, NVALID# */ +#define CFG_GPIO0_TSRH 0x00000000 +#define CFG_GPIO0_TSRL 0x00000000 +#define CFG_GPIO0_TCR 0xBFF68317 /* 3-state OUT: 22/23/29; 12,2 is not 3-state */ +#define CFG_GPIO0_ODR 0x00000000 + +#define CFG_GPIO_SW_RESET 1 +#define CFG_GPIO_ZEUS_PE 12 +#define CFG_GPIO_LED_RED 22 +#define CFG_GPIO_LED_GREEN 23 + +/* Time in milli-seconds */ +#define CFG_TIME_POST 5000 +#define CFG_TIME_FACTORY_RESET 10000 + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* ENVIRONMENT VARS */ + +#define CONFIG_PREBOOT "echo;echo Welcome to Bulletendpoints board v1.1;echo" +#define CONFIG_IPADDR 192.168.1.10 +#define CONFIG_SERVERIP 192.168.1.100 +#define CONFIG_GATEWAYIP 192.168.1.100 +#define CONFIG_ETHADDR 50:00:00:00:06:00 +#define CONFIG_ETH1ADDR 50:00:00:00:06:01 +#if 0 +#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ +#else +#define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */ +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "logversion=2\0" \ + "hostname=zeus\0" \ + "netdev=eth0\0" \ + "ethact=ppc_4xx_eth0\0" \ + "netmask=255.255.255.0\0" \ + "ramdisk_size=50000\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw" \ + " nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw" \ + " ramdisk=${ramdisk_size}\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0," \ + "${baudrate}\0" \ + "net_nfs=tftp ${kernel_mem_addr} ${file_kernel};" \ + "run nfsargs addip addtty;bootm\0" \ + "net_ram=tftp ${kernel_mem_addr} ${file_kernel};" \ + "tftp ${ramdisk_mem_addr} ${file_fs};" \ + "run ramargs addip addtty;" \ + "bootm ${kernel_mem_addr} ${ramdisk_mem_addr}\0" \ + "rootpath=/target_fs/zeus\0" \ + "kernel_fl_addr=ff000000\0" \ + "kernel_mem_addr=200000\0" \ + "ramdisk_fl_addr=ff300000\0" \ + "ramdisk_mem_addr=4000000\0" \ + "uboot_fl_addr=fffc0000\0" \ + "uboot_mem_addr=100000\0" \ + "file_uboot=/zeus/u-boot.bin\0" \ + "tftp_uboot=tftp 100000 ${file_uboot}\0" \ + "update_uboot=protect off fffc0000 ffffffff;" \ + "era fffc0000 ffffffff;cp.b 100000 fffc0000 40000;" \ + "protect on fffc0000 ffffffff\0" \ + "upd_uboot=run tftp_uboot;run update_uboot\0" \ + "file_kernel=/zeus/uImage_ba\0" \ + "tftp_kernel=tftp 100000 ${file_kernel}\0" \ + "update_kernel=protect off ff000000 ff17ffff;" \ + "era ff000000 ff17ffff;cp.b 100000 ff000000 180000\0" \ + "upd_kernel=run tftp_kernel;run update_kernel\0" \ + "file_fs=/zeus/rootfs_ba.img\0" \ + "tftp_fs=tftp 100000 ${file_fs}\0" \ + "update_fs=protect off ff300000 ff87ffff;era ff300000 ff87ffff;"\ + "cp.b 100000 ff300000 580000\0" \ + "upd_fs=run tftp_fs;run update_fs\0" \ + "bootcmd=chkreset;run ramargs addip addtty addmisc;" \ + "bootm ${kernel_fl_addr} ${ramdisk_fl_addr}\0" \ + "" + +#endif /* __CONFIG_H */ diff --git a/include/ppc405.h b/include/ppc405.h index 8e64731929e..4fc52833d40 100644 --- a/include/ppc405.h +++ b/include/ppc405.h @@ -541,6 +541,18 @@ #define PLLMR1_266_66_33_33 (PLL_FBKDIV_8 | \ PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) +#define PLLMR0_333_111_55_37 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \ + PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \ + PLL_MALDIV_1 | PLL_PCIDIV_3) +#define PLLMR1_333_111_55_37 (PLL_FBKDIV_10 | \ + PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI) +#define PLLMR0_333_111_55_111 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \ + PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \ + PLL_MALDIV_1 | PLL_PCIDIV_1) +#define PLLMR1_333_111_55_111 (PLL_FBKDIV_10 | \ + PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI) /* * PLL Voltage Controlled Oscillator (VCO) definitions @@ -1226,6 +1238,8 @@ #define mtebc(reg, data) mtdcr(ebccfga,reg);mtdcr(ebccfgd,data) #define mfebc(reg, data) mtdcr(ebccfga,reg);data = mfdcr(ebccfgd) +#define mtsdram(reg, data) do { mtdcr(memcfga,reg);mtdcr(memcfgd,data); } while (0) +#define mfsdram(reg, data) do { mtdcr(memcfga,reg);data = mfdcr(memcfgd); } while (0) #ifndef __ASSEMBLY__ -- cgit v1.3.1 From 30b52df9e906bf0e465916c2c6bb5192b438e0b8 Mon Sep 17 00:00:00 2001 From: Jon Loeliger Date: Wed, 15 Aug 2007 11:55:35 -0500 Subject: 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h Remove a leftover in net/tftp.c while we're at it. Signed-off-by: Jon Loeliger --- include/configs/sbc8641d.h | 6 +++--- net/tftp.c | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'include/configs') diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index 68d31ca1dbc..277b611409d 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -492,7 +492,7 @@ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -513,7 +513,7 @@ /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ #endif @@ -525,7 +525,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/net/tftp.c b/net/tftp.c index 888ec987cfc..d6db91c0584 100644 --- a/net/tftp.c +++ b/net/tftp.c @@ -614,4 +614,4 @@ static void parse_multicast_oack(char *pkt, int len) #endif /* Multicast TFTP */ -#endif /* CFG_CMD_NET */ +#endif -- cgit v1.3.1 From 35cc4e4823668e8745854899cfaedd4489beb0ef Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Wed, 15 Aug 2007 22:30:39 -0500 Subject: mpc83xx: enable libfdt by default on freescale boards this enables libfdt code by default for the freescale mpc8313erdb, mpc832xemds, mpc8349emds, mpc8349itx and gp boards. Signed-off-by: Kim Phillips --- include/configs/MPC8313ERDB.h | 2 +- include/configs/MPC832XEMDS.h | 2 +- include/configs/MPC8349EMDS.h | 2 +- include/configs/MPC8349ITX.h | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) (limited to 'include/configs') diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 81db96f4661..e2ec0bc2200 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -228,7 +228,7 @@ #define CFG_LBLAWAR3_PRELIM 0x8000000E /* 32KB */ /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 /* maximum size of the flat tree (8K) */ diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index f62ca2c42be..e8c6b75025b 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -315,7 +315,7 @@ #endif /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 /* maximum size of the flat tree (8K) */ diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 1567fcfae32..d28e0f36590 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -339,7 +339,7 @@ #endif /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 /* maximum size of the flat tree (8K) */ diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 44649d05090..82ef4da5d94 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -296,7 +296,7 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CFG_NS16550_COM2 (CFG_IMMR + 0x4600) /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE +#define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP /* maximum size of the flat tree (8K) */ -- cgit v1.3.1 From 9de469bd960cc1870bb40d6672ed42726b8b50d7 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Thu, 16 Aug 2007 10:18:33 +0200 Subject: ppc4xx: Only enable POST FPU test on Sequoia and not Rainier Signed-off-by: Stefan Roese --- include/configs/sequoia.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'include/configs') diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index 3f75a441a0d..824a81240cd 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -343,6 +343,11 @@ #define CONFIG_CMD_USB #endif +#ifndef CONFIG_RAINIER +#define CFG_POST_FPU_ON CFG_POST_FPU +#else +#define CFG_POST_FPU_ON 0 +#endif /* POST support */ #define CONFIG_POST (CFG_POST_MEMORY | \ @@ -350,7 +355,7 @@ CFG_POST_UART | \ CFG_POST_I2C | \ CFG_POST_CACHE | \ - CFG_POST_FPU | \ + CFG_POST_FPU_ON | \ CFG_POST_ETHER | \ CFG_POST_SPR) -- cgit v1.3.1 From 3a79013e2adda53332dfd0b511066a805e929a9d Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Wed, 15 Aug 2007 20:03:25 -0500 Subject: Define tsec flag values in config files The tsec_info structure and array has a "flags" field for each ethernet controller. This field is the only reason there are settings. Switch to defining TSECn_FLAGS for each controller in the config header, and we can greatly simplify the array, and also simplify the addition of future boards. Signed-off-by: Andy Fleming --- drivers/tsec.c | 30 +++++++++++------------------- include/configs/MPC8313ERDB.h | 2 ++ include/configs/MPC8349EMDS.h | 2 ++ include/configs/MPC8349ITX.h | 2 ++ include/configs/MPC8540ADS.h | 3 +++ include/configs/MPC8540EVAL.h | 4 ++++ include/configs/MPC8541CDS.h | 5 ++--- include/configs/MPC8544DS.h | 8 +++----- include/configs/MPC8548CDS.h | 4 ++++ include/configs/MPC8555CDS.h | 5 ++--- include/configs/MPC8560ADS.h | 3 ++- include/configs/MPC8568MDS.h | 6 +++--- include/configs/MPC8641HPCN.h | 4 ++++ include/configs/PM854.h | 3 +++ include/configs/PM856.h | 3 ++- include/configs/TQM834x.h | 2 ++ include/configs/TQM85xx.h | 3 +++ include/configs/sbc8349.h | 2 ++ include/configs/sbc8641d.h | 4 ++++ include/configs/stxgp3.h | 3 ++- include/configs/stxssa.h | 3 ++- 21 files changed, 64 insertions(+), 37 deletions(-) (limited to 'include/configs') diff --git a/drivers/tsec.c b/drivers/tsec.c index fd21ed4edc4..1df8f7dc256 100644 --- a/drivers/tsec.c +++ b/drivers/tsec.c @@ -65,38 +65,30 @@ struct tsec_info_struct { * FEC_PHYIDX */ static struct tsec_info_struct tsec_info[] = { -#if defined(CONFIG_TSEC1) -#if defined(CONFIG_MPC8544DS) || defined(CONFIG_MPC8641HPCN) - {TSEC1_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC1_PHYIDX}, -#else - {TSEC1_PHY_ADDR, TSEC_GIGABIT, TSEC1_PHYIDX}, -#endif +#ifdef CONFIG_TSEC1 + {TSEC1_PHY_ADDR, TSEC1_FLAGS, TSEC1_PHYIDX}, #else {0, 0, 0}, #endif -#if defined(CONFIG_TSEC2) -#if defined(CONFIG_MPC8641HPCN) - {TSEC2_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC2_PHYIDX}, -#else - {TSEC2_PHY_ADDR, TSEC_GIGABIT, TSEC2_PHYIDX}, -#endif +#ifdef CONFIG_TSEC2 + {TSEC2_PHY_ADDR, TSEC2_FLAGS, TSEC2_PHYIDX}, #else {0, 0, 0}, #endif #ifdef CONFIG_MPC85XX_FEC - {FEC_PHY_ADDR, 0, FEC_PHYIDX}, + {FEC_PHY_ADDR, FEC_FLAGS, FEC_PHYIDX}, #else -#if defined(CONFIG_TSEC3) - {TSEC3_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC3_PHYIDX}, +#ifdef CONFIG_TSEC3 + {TSEC3_PHY_ADDR, TSEC3_FLAGS, TSEC3_PHYIDX}, #else {0, 0, 0}, #endif -#if defined(CONFIG_TSEC4) - {TSEC4_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC4_PHYIDX}, +#ifdef CONFIG_TSEC4 + {TSEC4_PHY_ADDR, TSEC4_FLAGS, TSEC4_PHYIDX}, #else {0, 0, 0}, -#endif -#endif +#endif /* CONFIG_TSEC4 */ +#endif /* CONFIG_MPC85XX_FEC */ }; #define MAXCONTROLLERS (4) diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 81db96f4661..f92dce541f8 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -310,6 +310,8 @@ #define CONFIG_TSEC2_NAME "TSEC1" #define TSEC1_PHY_ADDR 0x1c #define TSEC2_PHY_ADDR 4 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 1567fcfae32..10af5f0bc8a 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -440,6 +440,8 @@ #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 44649d05090..58ee13d3f37 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -382,6 +382,7 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CFG_TSEC1_OFFSET 0x24000 #define TSEC1_PHY_ADDR 0x1c /* VSC8201 uses address 0x1c */ #define TSEC1_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT #endif #ifdef CONFIG_TSEC2 @@ -391,6 +392,7 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_UNKNOWN_TSEC /* TSEC2 is proprietary */ #define TSEC2_PHY_ADDR 4 #define TSEC2_PHYIDX 0 +#define TSEC2_FLAGS TSEC_GIGABIT #endif #define CONFIG_ETHPRIME "Freescale TSEC" diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index 5a7c879a533..b7749926717 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -374,6 +374,8 @@ #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT #if CONFIG_HAS_FEC @@ -381,6 +383,7 @@ #define CONFIG_MPC85XX_FEC_NAME "FEC" #define FEC_PHY_ADDR 3 #define FEC_PHYIDX 0 +#define FEC_FLAGS 0 #endif /* Options are: TSEC[0-1], FEC */ diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h index 0ce25cf24e7..5c03ac8c95e 100644 --- a/include/configs/MPC8540EVAL.h +++ b/include/configs/MPC8540EVAL.h @@ -224,6 +224,10 @@ #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 #define FEC_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT +#define FEC_FLAGS 0 + /* Options are: TSEC[0-1], FEC */ #define CONFIG_ETHPRIME "TSEC0" diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index 232f1716bcc..33a153e3460 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -384,13 +384,12 @@ extern unsigned long get_clock_freq(void); #define CONFIG_TSEC1_NAME "TSEC0" #define CONFIG_TSEC2 1 #define CONFIG_TSEC2_NAME "TSEC1" -#undef CONFIG_MPC85XX_FEC #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 -#define FEC_PHY_ADDR 3 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 -#define FEC_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 32934e15506..78634473317 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -364,15 +364,13 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_TSEC1_NAME "eTSEC1" #define CONFIG_TSEC3 1 #define CONFIG_TSEC3_NAME "eTSEC3" -#undef CONFIG_MPC85XX_FEC - -#define CONFIG_TSEC_TBI 1 /* enable internal TBI phy */ -#define CONFIG_SGMII_RISER -#define TSEC1_SGMII_PHY_ADDR_OFFSET 0x1c /* sgmii phy base */ #define TSEC1_PHY_ADDR 0 #define TSEC3_PHY_ADDR 1 +#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) + #define TSEC1_PHYIDX 0 #define TSEC3_PHYIDX 0 diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index cda9fd5c1c7..7345a3e10f0 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -447,6 +447,10 @@ extern unsigned long get_clock_freq(void); #define TSEC2_PHYIDX 0 #define TSEC3_PHYIDX 0 #define TSEC4_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT +#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) /* Options are: eTSEC[0-3] */ #define CONFIG_ETHPRIME "eTSEC0" diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index e8fe99aaf13..48a2663b5c6 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -384,13 +384,12 @@ extern unsigned long get_clock_freq(void); #define CONFIG_TSEC1_NAME "TSEC0" #define CONFIG_TSEC2 1 #define CONFIG_TSEC2_NAME "TSEC1" -#undef CONFIG_MPC85XX_FEC #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 -#define FEC_PHY_ADDR 3 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 -#define FEC_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index c10e551e408..da41dadcd27 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -360,11 +360,12 @@ #define CONFIG_TSEC1_NAME "TSEC0" #define CONFIG_TSEC2 1 #define CONFIG_TSEC2_NAME "TSEC1" -#undef CONFIG_MPC85XX_FEC #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index dc9cb1ff545..6b824ed9ddb 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -399,9 +399,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_TSEC1_NAME "eTSEC0" #define CONFIG_TSEC2 1 #define CONFIG_TSEC2_NAME "eTSEC1" -#undef CONFIG_TSEC3 -#undef CONFIG_TSEC4 -#undef CONFIG_MPC85XX_FEC #define TSEC1_PHY_ADDR 2 #define TSEC2_PHY_ADDR 3 @@ -409,6 +406,9 @@ extern unsigned long get_clock_freq(void); #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT + /* Options are: eTSEC[0-3] */ #define CONFIG_ETHPRIME "eTSEC0" diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 64dcbd01093..e912331f31c 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -417,6 +417,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define TSEC2_PHYIDX 0 #define TSEC3_PHYIDX 0 #define TSEC4_PHYIDX 0 +#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) #define CONFIG_ETHPRIME "eTSEC1" diff --git a/include/configs/PM854.h b/include/configs/PM854.h index dbf94228ae6..93090b981c3 100644 --- a/include/configs/PM854.h +++ b/include/configs/PM854.h @@ -270,11 +270,14 @@ #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT #define CONFIG_MPC85XX_FEC 1 #define CONFIG_MPC85XX_FEC_NAME "FEC" #define FEC_PHY_ADDR 3 #define FEC_PHYIDX 0 +#define FEC_FLAGS 0 /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" diff --git a/include/configs/PM856.h b/include/configs/PM856.h index 6bdfa5d8f1f..6105747c70e 100644 --- a/include/configs/PM856.h +++ b/include/configs/PM856.h @@ -262,11 +262,12 @@ #define CONFIG_TSEC1_NAME "TSEC0" #define CONFIG_TSEC2 1 #define CONFIG_TSEC2_NAME "TSEC1" -#undef CONFIG_MPC85XX_FEC #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT #endif /* CONFIG_TSEC_ENET */ diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index 661712b227b..91c1694f2ca 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -253,6 +253,8 @@ extern int tqm834x_num_flash_banks; #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index d5ce3ba7169..cb9bf549295 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -266,8 +266,11 @@ #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT #define FEC_PHY_ADDR 3 #define FEC_PHYIDX 0 +#define FEC_FLAGS 0 #define CONFIG_HAS_ETH1 #define CONFIG_HAS_ETH2 diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index 1831bef0de1..aa515ea6148 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -410,6 +410,8 @@ #define TSEC2_PHY_ADDR 0x1a #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index 277b611409d..760b754e6c5 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -380,6 +380,10 @@ #define TSEC2_PHYIDX 0 #define TSEC3_PHYIDX 0 #define TSEC4_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT +#define TSEC3_FLAGS TSEC_GIGABIT +#define TSEC4_FLAGS TSEC_GIGABIT #define CFG_TBIPA_VALUE 0x1e /* Set TBI address not to conflict with TSEC1_PHY_ADDR */ diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h index 1f41cf7699e..43b185bee6f 100644 --- a/include/configs/stxgp3.h +++ b/include/configs/stxgp3.h @@ -234,12 +234,13 @@ #define CONFIG_TSEC1_NAME "TSEC0" #define CONFIG_TSEC2 1 #define CONFIG_TSEC2_NAME "TSEC1" -#undef CONFIG_MPS85XX_FEC #define TSEC1_PHY_ADDR 2 #define TSEC2_PHY_ADDR 4 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT #define CONFIG_ETHPRIME "TSEC0" #elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */ diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index 55e2c8da20d..3dae27ac11b 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -260,12 +260,13 @@ #define CONFIG_TSEC1_NAME "TSEC0" #define CONFIG_TSEC2 1 #define CONFIG_TSEC2_NAME "TSEC1" -#define CONFIG_MPS85XX_FEC #define TSEC1_PHY_ADDR 2 #define TSEC2_PHY_ADDR 4 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT #define CONFIG_ETHPRIME "TSEC0" #elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */ -- cgit v1.3.1 From b96c83d4ae475a70ef2635cd0e748174c44c8601 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Wed, 15 Aug 2007 20:03:34 -0500 Subject: Fix numerous bugs in the 8568 UEC support Actually, fixed a large bug in the UEC for *all* platforms. How did this ever work? uec_init() did not follow the spec for eth_init(), and returned 0 on success. Switch it to return the link like tsec_init() (and 0 on error) The immap for the 8568 was defined based on MPC8568, rather than CONFIG_MPC8568 CONFIG_QE was off CONFIG_ETHPRIME was set to "Freescale GETH". Now is "FSL UEC0" Fixed a comment about the ranges for CONFIG_ETHPRIME if TSEC_ENET is enabled Signed-off-by: Andy Fleming --- drivers/qe/uec.c | 6 +++--- include/asm-ppc/immap_85xx.h | 2 +- include/configs/MPC8568MDS.h | 6 +++--- 3 files changed, 7 insertions(+), 7 deletions(-) (limited to 'include/configs') diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c index 89a72798232..dc2765bb09e 100644 --- a/drivers/qe/uec.c +++ b/drivers/qe/uec.c @@ -1110,7 +1110,7 @@ static int uec_init(struct eth_device* dev, bd_t *bd) if (dev->enetaddr[0] & 0x01) { printf("%s: MacAddress is multcast address\n", __FUNCTION__); - return -EINVAL; + return 0; } uec_set_mac_address(uec, dev->enetaddr); uec->the_first_run = 1; @@ -1119,10 +1119,10 @@ static int uec_init(struct eth_device* dev, bd_t *bd) err = uec_open(uec, COMM_DIR_RX_AND_TX); if (err) { printf("%s: cannot enable UEC device\n", dev->name); - return err; + return 0; } - return 0; + return uec->mii_info->link; } static void uec_halt(struct eth_device* dev) diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h index 3d4816f3a99..496fc72da34 100644 --- a/include/asm-ppc/immap_85xx.h +++ b/include/asm-ppc/immap_85xx.h @@ -1596,7 +1596,7 @@ typedef struct ccsr_gur { uint svr; /* 0xe00a4 - System version register */ char res10a[8]; uint rstcr; /* 0xe00b0 - Reset control register */ -#ifdef MPC8568 +#ifdef CONFIG_MPC8568 char res10b[76]; par_io_t qe_par_io[7]; /* 0xe0100 - 0xe01bf */ char res10c[3136]; diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 6b824ed9ddb..80ccda51f7c 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -35,7 +35,7 @@ #define CONFIG_PCI #define CONFIG_TSEC_ENET /* tsec ethernet support */ -#undef CONFIG_QE /* Enable QE */ +#define CONFIG_QE /* Enable QE */ #define CONFIG_ENV_OVERWRITE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #define CONFIG_DDR_DLL /* possible DLL fix needed */ @@ -348,7 +348,7 @@ extern unsigned long get_clock_freq(void); */ #define CONFIG_UEC_ETH #ifndef CONFIG_TSEC_ENET -#define CONFIG_ETHPRIME "Freescale GETH" +#define CONFIG_ETHPRIME "FSL UEC0" #endif #define CONFIG_PHY_MODE_NEED_CHANGE #define CONFIG_eTSEC_MDIO_BUS @@ -409,7 +409,7 @@ extern unsigned long get_clock_freq(void); #define TSEC1_FLAGS TSEC_GIGABIT #define TSEC2_FLAGS TSEC_GIGABIT -/* Options are: eTSEC[0-3] */ +/* Options are: eTSEC[0-1] */ #define CONFIG_ETHPRIME "eTSEC0" #endif /* CONFIG_TSEC_ENET */ -- cgit v1.3.1 From ea5877e31ed63ade948fd1293895ec23fe01472e Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 16 Aug 2007 11:01:21 -0500 Subject: Fix up some fdt issues on 8544DS It looks like we had a merge issue that duplicated a bit of code in ft_board_setup. Also, we need to set CONFIG_HAS_ETH0 to get the MAC address properly set in the device tree on boot for TSEC1 Signed-off-by: Kumar Gala --- board/freescale/mpc8544ds/mpc8544ds.c | 7 ------- include/configs/MPC8544DS.h | 1 + 2 files changed, 1 insertion(+), 7 deletions(-) (limited to 'include/configs') diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c index 8ddbb010119..80822bec737 100644 --- a/board/freescale/mpc8544ds/mpc8544ds.c +++ b/board/freescale/mpc8544ds/mpc8544ds.c @@ -540,12 +540,5 @@ ft_board_setup(void *blob, bd_t *bd) debug("PCI@b000 first_busno=%d last_busno=%d\n",p[0],p[1]); } #endif - ft_cpu_setup(blob, bd); - - p = ft_get_prop(blob, "/memory/reg", &len); - if (p != NULL) { - *p++ = cpu_to_be32(bd->bi_memstart); - *p = cpu_to_be32(bd->bi_memsize); - } } #endif diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 78634473317..fcb92fac4b5 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -472,6 +472,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) +#define CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:E0:0C:02:00:FD #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:E0:0C:02:01:FD -- cgit v1.3.1 From d64ee908a1b525e5bb2b4cbeb5c449ad6a469666 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 16 Aug 2007 15:05:04 -0500 Subject: Update MPC8544 DS PCI memory map The PCIe bus that the ULI M1575 is connected to has no possible way of needing more than the fixed amount of IO & Memory space needed by the ULI. So make it use far less IO & memory space and have it use the shared LAW. This free's up a LAW for PCIe1 IO space. Also reduce the amount of IO space needed by each bus. Signed-off-by: Kumar Gala --- board/freescale/mpc8544ds/init.S | 13 ++++++------- include/configs/MPC8544DS.h | 21 +++++++++------------ 2 files changed, 15 insertions(+), 19 deletions(-) (limited to 'include/configs') diff --git a/board/freescale/mpc8544ds/init.S b/board/freescale/mpc8544ds/init.S index ea7d54dc302..900c3680c71 100644 --- a/board/freescale/mpc8544ds/init.S +++ b/board/freescale/mpc8544ds/init.S @@ -218,7 +218,7 @@ law_entry: .long LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M) .long (CFG_PCI1_IO_PHYS>>12) & 0xfffff - .long LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_16M) + .long LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_64K) .long (CFG_LBC_CACHE_BASE>>12) & 0xfffff .long LAWAR_EN | LAWAR_TRGT_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M) @@ -226,18 +226,17 @@ law_entry: .long (CFG_PCIE1_MEM_PHYS>>12) & 0xfffff .long LAWAR_EN | LAWAR_TRGT_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_256M) - /* To keep to 10 LAWs, PCIE1_IO_PHYS must use top of mem region */ + .long (CFG_PCIE1_IO_PHYS>>12) & 0xfffff + .long LAWAR_EN | LAWAR_TRGT_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_64K) .long (CFG_PCIE2_MEM_PHYS>>12) & 0xfffff .long LAWAR_EN | LAWAR_TRGT_PCIE2 | (LAWAR_SIZE & LAWAR_SIZE_512M) .long (CFG_PCIE2_IO_PHYS>>12) & 0xfffff - .long LAWAR_EN | LAWAR_TRGT_PCIE2 | (LAWAR_SIZE & LAWAR_SIZE_16M) + .long LAWAR_EN | LAWAR_TRGT_PCIE2 | (LAWAR_SIZE & LAWAR_SIZE_64K) + /* contains both PCIE3 MEM & IO space */ .long (CFG_PCIE3_MEM_PHYS>>12) & 0xfffff - .long LAWAR_EN | LAWAR_TRGT_PCIE3 | (LAWAR_SIZE & LAWAR_SIZE_256M) - - .long (CFG_PCIE3_IO_PHYS>>12) & 0xfffff - .long LAWAR_EN | LAWAR_TRGT_PCIE3 | (LAWAR_SIZE & LAWAR_SIZE_16M) + .long LAWAR_EN | LAWAR_TRGT_PCIE3 | (LAWAR_SIZE & LAWAR_SIZE_2M) 4: entry_end diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index fcb92fac4b5..746f360f9e1 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -282,7 +282,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ #define CFG_PCI1_IO_BASE 0x00000000 #define CFG_PCI1_IO_PHYS 0xe1000000 -#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */ +#define CFG_PCI1_IO_SIZE 0x00010000 /* 64k */ /* PCI view of System Memory */ #define CFG_PCI_MEMORY_BUS 0x00000000 @@ -294,26 +294,23 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CFG_PCIE2_MEM_PHYS CFG_PCIE2_MEM_BASE #define CFG_PCIE2_MEM_SIZE 0x20000000 /* 512M */ #define CFG_PCIE2_IO_BASE 0x00000000 -#define CFG_PCIE2_IO_PHYS 0xe2000000 -#define CFG_PCIE2_IO_SIZE 0x00100000 /* 1M */ +#define CFG_PCIE2_IO_PHYS 0xe1010000 +#define CFG_PCIE2_IO_SIZE 0x00010000 /* 64k */ /* controller 1, Slot 2,tgtid 2, Base address a000 */ #define CFG_PCIE1_MEM_BASE 0xa0000000 #define CFG_PCIE1_MEM_PHYS CFG_PCIE1_MEM_BASE -#define CFG_PCIE1_MEM_SIZE 0x08000000 /* 128M */ -#define CFG_PCIE1_MEM_BASE2 0xa8000000 -#define CFG_PCIE1_MEM_PHYS2 CFG_PCIE1_MEM_BASE2 -#define CFG_PCIE1_MEM_SIZE2 0x04000000 /* 64M */ -#define CFG_PCIE1_IO_BASE 0x00000000 /* reuse mem LAW */ -#define CFG_PCIE1_IO_PHYS 0xaf000000 -#define CFG_PCIE1_IO_SIZE 0x00100000 /* 1M */ +#define CFG_PCIE1_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCIE1_IO_BASE 0x00000000 +#define CFG_PCIE1_IO_PHYS 0xe1020000 +#define CFG_PCIE1_IO_SIZE 0x00010000 /* 64k */ /* controller 3, direct to uli, tgtid 3, Base address b000 */ #define CFG_PCIE3_MEM_BASE 0xb0000000 #define CFG_PCIE3_MEM_PHYS CFG_PCIE3_MEM_BASE -#define CFG_PCIE3_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCIE3_MEM_SIZE 0x00100000 /* 1M */ #define CFG_PCIE3_IO_BASE 0x00000000 -#define CFG_PCIE3_IO_PHYS 0xe3000000 +#define CFG_PCIE3_IO_PHYS 0xb0100000 /* reuse mem LAW */ #define CFG_PCIE3_IO_SIZE 0x00100000 /* 1M */ #if defined(CONFIG_PCI) -- cgit v1.3.1 From 10327dc5541f947c0cf7e31fef86c4706169607a Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Thu, 16 Aug 2007 16:35:02 -0500 Subject: Add CONFIG_HAS_ETH0 to all boards with TSEC The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether to update TSEC1's device-tree node, so we need to add it to all the boards with TSECs. Do this for 83xx and 86xx, too, since they will eventually do something similar. Signed-off-by: Andy Fleming --- include/configs/MPC8313ERDB.h | 1 + include/configs/MPC8349EMDS.h | 1 + include/configs/MPC8349ITX.h | 1 + include/configs/MPC8540ADS.h | 1 + include/configs/MPC8540EVAL.h | 3 +++ include/configs/MPC8541CDS.h | 1 + include/configs/MPC8548CDS.h | 1 + include/configs/MPC8555CDS.h | 1 + include/configs/MPC8560ADS.h | 1 + include/configs/MPC8641HPCN.h | 1 + include/configs/PM854.h | 1 + include/configs/PM856.h | 1 + include/configs/TQM834x.h | 1 + include/configs/TQM85xx.h | 1 + include/configs/sbc8349.h | 1 + include/configs/sbc8641d.h | 1 + include/configs/stxgp3.h | 1 + include/configs/stxssa.h | 1 + 18 files changed, 20 insertions(+) (limited to 'include/configs') diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index f92dce541f8..377503782c9 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -509,6 +509,7 @@ #define CONFIG_ETHADDR 00:E0:0C:00:95:01 #define CONFIG_HAS_ETH1 +#define CONFIG_HAS_ETH0 #define CONFIG_ETH1ADDR 00:E0:0C:00:95:02 #define CONFIG_IPADDR 10.0.0.2 diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 10af5f0bc8a..48616c08b06 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -701,6 +701,7 @@ #if defined(CONFIG_TSEC_ENET) #define CONFIG_ETHADDR 00:04:9f:ef:23:33 #define CONFIG_HAS_ETH1 +#define CONFIG_HAS_ETH0 #define CONFIG_ETH1ADDR 00:E0:0C:00:7E:21 #endif diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 58ee13d3f37..c5d036296c3 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -378,6 +378,7 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_TSEC1 #ifdef CONFIG_TSEC1 +#define CONFIG_HAS_ETH0 #define CONFIG_TSEC1_NAME "TSEC0" #define CFG_TSEC1_OFFSET 0x24000 #define TSEC1_PHY_ADDR 0x1c /* VSC8201 uses address 0x1c */ diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index b7749926717..22de2fb2c74 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -492,6 +492,7 @@ /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) +#define CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:E0:0C:00:00:FD #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h index 5c03ac8c95e..e376c11656b 100644 --- a/include/configs/MPC8540EVAL.h +++ b/include/configs/MPC8540EVAL.h @@ -213,10 +213,13 @@ #define CONFIG_NET_MULTI 1 #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_TSEC1 1 +#define CONFIG_HAS_ETH0 #define CONFIG_TSEC1_NAME "TSEC0" #define CONFIG_TSEC2 1 +#define CONFIG_HAS_ETH1 #define CONFIG_TSEC2_NAME "TSEC1" #define CONFIG_MPC85XX_FEC 1 +#define CONFIG_HAS_ETH2 #define CONFIG_MPC85XX_FEC_NAME "FEC" #define TSEC1_PHY_ADDR 7 #define TSEC2_PHY_ADDR 4 diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index 33a153e3460..a4727b29b8d 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -481,6 +481,7 @@ extern unsigned long get_clock_freq(void); /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) +#define CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:E0:0C:00:00:FD #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 7345a3e10f0..58a8ea55c3b 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -542,6 +542,7 @@ extern unsigned long get_clock_freq(void); /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) +#define CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:E0:0C:00:00:FD #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 48a2663b5c6..8d7d6579dae 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -481,6 +481,7 @@ extern unsigned long get_clock_freq(void); /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) +#define CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:E0:0C:00:00:FD #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index da41dadcd27..b3c33d9f7de 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -522,6 +522,7 @@ /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) +#define CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:E0:0C:00:00:FD #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index e912331f31c..03e815d87d1 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -608,6 +608,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD #endif +#define CONFIG_HAS_ETH0 1 #define CONFIG_HAS_ETH1 1 #define CONFIG_HAS_ETH2 1 #define CONFIG_HAS_ETH3 1 diff --git a/include/configs/PM854.h b/include/configs/PM854.h index 93090b981c3..a6a1e738a80 100644 --- a/include/configs/PM854.h +++ b/include/configs/PM854.h @@ -282,6 +282,7 @@ /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" +#define CONFIG_HAS_ETH0 #define CONFIG_HAS_ETH1 1 #define CONFIG_HAS_ETH2 1 diff --git a/include/configs/PM856.h b/include/configs/PM856.h index 6105747c70e..9a17e3d7333 100644 --- a/include/configs/PM856.h +++ b/include/configs/PM856.h @@ -392,6 +392,7 @@ /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) +#define CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:40:42:01:00:00 #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:40:42:01:00:01 diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index 91c1694f2ca..01472529d04 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -501,6 +501,7 @@ extern int tqm834x_num_flash_banks; */ #if defined(CONFIG_TSEC_ENET) +#define CONFIG_HAS_ETH0 #define CONFIG_ETHADDR D2:DA:5E:44:BC:29 #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 1E:F3:40:21:92:53 diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index cb9bf549295..a330c4220db 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -271,6 +271,7 @@ #define FEC_PHY_ADDR 3 #define FEC_PHYIDX 0 #define FEC_FLAGS 0 +#define CONFIG_HAS_ETH0 #define CONFIG_HAS_ETH1 #define CONFIG_HAS_ETH2 diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index aa515ea6148..37a8f87055b 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -662,6 +662,7 @@ #define CONFIG_ENV_OVERWRITE #if defined(CONFIG_TSEC_ENET) +#define CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:a0:1e:a0:13:8d #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:a0:1e:a0:13:8e diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index 760b754e6c5..3525ab4c5b0 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -546,6 +546,7 @@ #define CONFIG_ETH3ADDR 02:E0:0C:00:03:FD #endif +#define CONFIG_HAS_ETH0 1 #define CONFIG_HAS_ETH1 1 #define CONFIG_HAS_ETH2 1 #define CONFIG_HAS_ETH3 1 diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h index 43b185bee6f..c5ae0cde361 100644 --- a/include/configs/stxgp3.h +++ b/include/configs/stxgp3.h @@ -379,6 +379,7 @@ /*Note: change below for your network setting!!! */ #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) +#define CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:e0:0c:07:9b:8a #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:e0:0c:07:9b:8b diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index 3dae27ac11b..f32ff67d9f4 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -407,6 +407,7 @@ /*Note: change below for your network setting!!! */ #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) +#define CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:e0:0c:07:9b:8a #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:e0:0c:07:9b:8b -- cgit v1.3.1 From ab77bc547ba561c25ea34457ed17aa0b2f7c2723 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Wed, 15 Aug 2007 15:39:17 -0500 Subject: ColdFire: MCF5329 Update and cleanup Signed-off-by: TsiChungLiew --- Makefile | 2 +- board/freescale/m5329evb/mii.c | 8 ++--- board/freescale/m5329evb/nand.c | 2 +- common/cmd_bdinfo.c | 12 +++---- drivers/net/mcffec.c | 10 +++--- include/asm-m68k/immap.h | 2 ++ include/asm-m68k/io.h | 62 ++++++++++++++++++------------------ include/asm-m68k/timer.h | 14 +++++++++ include/configs/M5329EVB.h | 69 +++++++++++++++++++---------------------- lib_m68k/board.c | 2 +- lib_m68k/time.c | 3 +- rtc/mcfrtc.c | 4 +-- 12 files changed, 100 insertions(+), 90 deletions(-) (limited to 'include/configs') diff --git a/Makefile b/Makefile index 2bb11b6f883..79ab40b1a05 100644 --- a/Makefile +++ b/Makefile @@ -1682,7 +1682,7 @@ M5329BFEE_config : unconfig esac; \ >include/config.h ; \ if [ "$${NAND}" != "0" ] ; then \ - echo "#define NANDFLASH_SIZE $${NAND}" >> include/config.h ; \ + echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \ fi @$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale diff --git a/board/freescale/m5329evb/mii.c b/board/freescale/m5329evb/mii.c index 68dc04fd9a9..31f1510cc9f 100644 --- a/board/freescale/m5329evb/mii.c +++ b/board/freescale/m5329evb/mii.c @@ -30,7 +30,7 @@ DECLARE_GLOBAL_DATA_PTR; -#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) +#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) #undef MII_DEBUG #undef ET_DEBUG @@ -50,7 +50,7 @@ int fecpin_setclear(struct eth_device *dev, int setclear) return 0; } -#if defined(CFG_DISCOVER_PHY) || (CONFIG_COMMANDS & CFG_CMD_MII) +#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) #include /* Make MII read/write commands for the FEC. */ @@ -134,7 +134,7 @@ uint mii_send(uint mii_cmd) return (mii_reply & 0xffff); /* data read from phy */ } -#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CFG_CMD_MII) */ +#endif /* CFG_DISCOVER_PHY || CONFIG_CMD_MII */ #if defined(CFG_DISCOVER_PHY) int mii_discover_phy(struct eth_device *dev) @@ -303,4 +303,4 @@ int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, return 0; } -#endif /* CFG_CMD_NET, FEC_ENET & NET_MULTI */ +#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m5329evb/nand.c b/board/freescale/m5329evb/nand.c index 2272a244675..fefb42e614c 100644 --- a/board/freescale/m5329evb/nand.c +++ b/board/freescale/m5329evb/nand.c @@ -31,7 +31,7 @@ DECLARE_GLOBAL_DATA_PTR; -#if (CONFIG_COMMANDS & CFG_CMD_NAND) +#if defined(CONFIG_CMD_NAND) #include #include diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index 58ee9f350f6..889cff8411f 100644 --- a/common/cmd_bdinfo.c +++ b/common/cmd_bdinfo.c @@ -225,7 +225,7 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) #if defined(CFG_MBAR) print_num ("mbar", bd->bi_mbar_base ); #endif -#if defined(CFG_CMD_NET) +#if defined(CONFIG_CMD_NET) puts ("ethaddr ="); for (i=0; i<6; ++i) { printf ("%c%02X", i ? ':' : ' ', bd->bi_enetaddr[i]); @@ -239,22 +239,22 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) #endif #if defined(CONFIG_HAS_ETH2) - puts ("\neth2addr ="); - for (i=0; i<6; ++i) { + puts ("\neth2addr ="); + for (i=0; i<6; ++i) { printf ("%c%02X", i ? ':' : ' ', bd->bi_enet2addr[i]); } #endif #if defined(CONFIG_HAS_ETH3) - puts ("\neth3addr ="); - for (i=0; i<6; ++i) { + puts ("\neth3addr ="); + for (i=0; i<6; ++i) { printf ("%c%02X", i ? ':' : ' ', bd->bi_enet3addr[i]); } #endif puts ("\nip_addr = "); print_IPaddr (bd->bi_ip_addr); -#endif /* CFG_CMD_NET */ +#endif /* CONFIG_CMD_NET */ printf ("\nbaudrate = %d bps\n", bd->bi_baudrate); return 0; diff --git a/drivers/net/mcffec.c b/drivers/net/mcffec.c index fde1aaecb62..68a0ee640d2 100644 --- a/drivers/net/mcffec.c +++ b/drivers/net/mcffec.c @@ -51,7 +51,7 @@ DECLARE_GLOBAL_DATA_PTR; -#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) +#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) struct fec_info_s fec_info[] = { #ifdef CFG_FEC0_IOBASE @@ -410,7 +410,7 @@ int fec_init(struct eth_device *dev, bd_t * bd) fec_reset(dev); -#if (CONFIG_COMMANDS & CFG_CMD_MII) || defined (CONFIG_MII) || \ +#if defined(CONFIG_CMD_MII) || defined (CONFIG_MII) || \ defined (CFG_DISCOVER_PHY) mii_init(); @@ -420,7 +420,7 @@ int fec_init(struct eth_device *dev, bd_t * bd) #ifndef CFG_DISCOVER_PHY setFecDuplexSpeed(fecp, bd, (FECDUPLEX << 16) | FECSPEED); #endif /* ifndef CFG_DISCOVER_PHY */ -#endif /* CFG_CMD_MII || CONFIG_MII */ +#endif /* CONFIG_CMD_MII || CONFIG_MII */ /* We use strictly polling mode only */ fecp->eimr = 0; @@ -568,7 +568,7 @@ int mcffec_initialize(bd_t * bis) eth_register(dev); -#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII) +#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) miiphy_register(dev->name, mcffec_miiphy_read, mcffec_miiphy_write); #endif @@ -580,5 +580,5 @@ int mcffec_initialize(bd_t * bis) return 1; } -#endif /* CFG_CMD_NET, FEC_ENET & NET_MULTI */ +#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ #endif /* CONFIG_MCFFEC */ diff --git a/include/asm-m68k/immap.h b/include/asm-m68k/immap.h index 7c267af56ea..2555e7e8294 100644 --- a/include/asm-m68k/immap.h +++ b/include/asm-m68k/immap.h @@ -38,8 +38,10 @@ #ifdef CONFIG_MCFTMR #define CFG_UDELAY_BASE (MMAP_DTMR0) #define CFG_TMR_BASE (MMAP_DTMR1) +#define CFG_TMRPND_REG (((volatile int0_t *)(CFG_INTR_BASE))->iprh0) #define CFG_TMRINTR_NO (INT0_HI_DTMR1) #define CFG_TMRINTR_MASK (INTC_IPRH_INT33) +#define CFG_TMRINTR_PEND (CFG_TMRINTR_MASK) #define CFG_TMRINTR_PRI (6) #define CFG_TIMER_PRESCALER (((gd->bus_clk / 1000000) - 1) << 8) #endif diff --git a/include/asm-m68k/io.h b/include/asm-m68k/io.h index 114efb15d7e..e14a581dc16 100644 --- a/include/asm-m68k/io.h +++ b/include/asm-m68k/io.h @@ -28,18 +28,18 @@ #include -#define readb(addr) in_8((volatile u8 *)(addr)) -#define writeb(b,addr) out_8((volatile u8 *)(addr), (b)) +#define readb(addr) in_8((volatile u8 *)(addr)) +#define writeb(b,addr) out_8((volatile u8 *)(addr), (b)) #if !defined(__BIG_ENDIAN) -#define readw(addr) (*(volatile u16 *) (addr)) -#define readl(addr) (*(volatile u32 *) (addr)) -#define writew(b,addr) ((*(volatile u16 *) (addr)) = (b)) -#define writel(b,addr) ((*(volatile u32 *) (addr)) = (b)) +#define readw(addr) (*(volatile u16 *) (addr)) +#define readl(addr) (*(volatile u32 *) (addr)) +#define writew(b,addr) ((*(volatile u16 *) (addr)) = (b)) +#define writel(b,addr) ((*(volatile u32 *) (addr)) = (b)) #else -#define readw(addr) in_le16((volatile u16 *)(addr)) -#define readl(addr) in_le32((volatile u32 *)(addr)) -#define writew(b,addr) out_le16((volatile u16 *)(addr),(b)) -#define writel(b,addr) out_le32((volatile u32 *)(addr),(b)) +#define readw(addr) in_le16((volatile u16 *)(addr)) +#define readl(addr) in_le32((volatile u32 *)(addr)) +#define writew(b,addr) out_le16((volatile u16 *)(addr),(b)) +#define writel(b,addr) out_le32((volatile u32 *)(addr),(b)) #endif /* @@ -48,25 +48,25 @@ * are arrays of bytes, and byte-swapping is not appropriate in * that case. - paulus */ -#define insb(port, buf, ns) _insb((u8 *)((port)+_IO_BASE), (buf), (ns)) -#define outsb(port, buf, ns) _outsb((u8 *)((port)+_IO_BASE), (buf), (ns)) -#define insw(port, buf, ns) _insw_ns((u16 *)((port)+_IO_BASE), (buf), (ns)) -#define outsw(port, buf, ns) _outsw_ns((u16 *)((port)+_IO_BASE), (buf), (ns)) -#define insl(port, buf, nl) _insl_ns((u32 *)((port)+_IO_BASE), (buf), (nl)) -#define outsl(port, buf, nl) _outsl_ns((u32 *)((port)+_IO_BASE), (buf), (nl)) - -#define inb(port) in_8((u8 *)((port)+_IO_BASE)) -#define outb(val, port) out_8((u8 *)((port)+_IO_BASE), (val)) +#define insb(port, buf, ns) _insb((u8 *)((port)+_IO_BASE), (buf), (ns)) +#define outsb(port, buf, ns) _outsb((u8 *)((port)+_IO_BASE), (buf), (ns)) +#define insw(port, buf, ns) _insw_ns((u16 *)((port)+_IO_BASE), (buf), (ns)) +#define outsw(port, buf, ns) _outsw_ns((u16 *)((port)+_IO_BASE), (buf), (ns)) +#define insl(port, buf, nl) _insl_ns((u32 *)((port)+_IO_BASE), (buf), (nl)) +#define outsl(port, buf, nl) _outsl_ns((u32 *)((port)+_IO_BASE), (buf), (nl)) + +#define inb(port) in_8((u8 *)((port)+_IO_BASE)) +#define outb(val, port) out_8((u8 *)((port)+_IO_BASE), (val)) #if !defined(__BIG_ENDIAN) -#define inw(port) in_be16((u16 *)((port)+_IO_BASE)) -#define outw(val, port) out_be16((u16 *)((port)+_IO_BASE), (val)) -#define inl(port) in_be32((u32 *)((port)+_IO_BASE)) -#define outl(val, port) out_be32((u32 *)((port)+_IO_BASE), (val)) +#define inw(port) in_be16((u16 *)((port)+_IO_BASE)) +#define outw(val, port) out_be16((u16 *)((port)+_IO_BASE), (val)) +#define inl(port) in_be32((u32 *)((port)+_IO_BASE)) +#define outl(val, port) out_be32((u32 *)((port)+_IO_BASE), (val)) #else -#define inw(port) in_le16((u16 *)((port)+_IO_BASE)) -#define outw(val, port) out_le16((u16 *)((port)+_IO_BASE), (val)) -#define inl(port) in_le32((u32 *)((port)+_IO_BASE)) -#define outl(val, port) out_le32((u32 *)((port)+_IO_BASE), (val)) +#define inw(port) in_le16((u16 *)((port)+_IO_BASE)) +#define outw(val, port) out_le16((u16 *)((port)+_IO_BASE), (val)) +#define inl(port) in_le32((u32 *)((port)+_IO_BASE)) +#define outl(val, port) out_le32((u32 *)((port)+_IO_BASE), (val)) #endif extern inline void _insb(volatile u8 * port, void *buf, int ns) @@ -151,10 +151,10 @@ extern inline void _outsl_ns(volatile u32 * port, const void *buf, int nl) * Neither do the standard versions now, these are just here * for older code. */ -#define insw_ns(port, buf, ns) _insw_ns((u16 *)((port)+_IO_BASE), (buf), (ns)) -#define outsw_ns(port, buf, ns) _outsw_ns((u16 *)((port)+_IO_BASE), (buf), (ns)) -#define insl_ns(port, buf, nl) _insl_ns((u32 *)((port)+_IO_BASE), (buf), (nl)) -#define outsl_ns(port, buf, nl) _outsl_ns((u32 *)((port)+_IO_BASE), (buf), (nl)) +#define insw_ns(port, buf, ns) _insw_ns((u16 *)((port)+_IO_BASE), (buf), (ns)) +#define outsw_ns(port, buf, ns) _outsw_ns((u16 *)((port)+_IO_BASE), (buf), (ns)) +#define insl_ns(port, buf, nl) _insl_ns((u32 *)((port)+_IO_BASE), (buf), (nl)) +#define outsl_ns(port, buf, nl) _outsl_ns((u32 *)((port)+_IO_BASE), (buf), (nl)) #define IO_SPACE_LIMIT ~0 diff --git a/include/asm-m68k/timer.h b/include/asm-m68k/timer.h index d8f4e2a6ac4..3ec710d1f68 100644 --- a/include/asm-m68k/timer.h +++ b/include/asm-m68k/timer.h @@ -33,12 +33,26 @@ /****************************************************************************/ /* DMA Timer module registers */ typedef struct dtimer_ctrl { +#if defined(CONFIG_M5249) || defined(CONFIG_M5253) u16 tmr; /* 0x00 Mode register */ + u16 res1; /* 0x02 */ + u16 trr; /* 0x04 Reference register */ + u16 res2; /* 0x06 */ + u16 tcr; /* 0x08 Capture register */ + u16 res3; /* 0x0A */ + u16 tcn; /* 0x0C Counter register */ + u16 res4; /* 0x0E */ + u8 res6; /* 0x10 */ + u8 ter; /* 0x11 Event register */ + u16 res7; /* 0x12 */ +#else + u16 tmr; /* 0x00 Mode register */ u8 txmr; /* 0x02 Extended Mode register */ u8 ter; /* 0x03 Event register */ u32 trr; /* 0x04 Reference register */ u32 tcr; /* 0x08 Capture register */ u32 tcn; /* 0x0C Counter register */ +#endif } dtmr_t; /*Programmable Interrupt Timer */ diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index 6a7e052a055..d3b160505be 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -47,25 +47,23 @@ #undef CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ -#define DEFAULT_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_CACHE | \ - CFG_CMD_DATE | \ - CFG_CMD_ELF | \ - CFG_CMD_FLASH | \ - CFG_CMD_I2C | \ - (CFG_CMD_LOADB | CFG_CMD_LOADS) | \ - CFG_CMD_MEMORY | \ - CFG_CMD_MISC | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO \ - ) +/* Command line configuration */ +#include + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO #ifdef NANDFLASH_SIZE -# define CONFIG_COMMANDS (DEFAULT_COMMANDS | CFG_CMD_NAND) -#else -# define CONFIG_COMMANDS (DEFAULT_COMMANDS) +# define CONFIG_CMD_NAND #endif #define CFG_UNIFY_CACHE @@ -108,9 +106,9 @@ #define CFG_I2C_OFFSET 0x58000 #define CFG_IMMR CFG_MBAR -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include #define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ +#define CONFIG_UDP_CHECKSUM + #ifdef CONFIG_MCFFEC # define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 # define CONFIG_IPADDR 192.162.1.2 @@ -137,7 +135,7 @@ #define CFG_PROMPT "-> " #define CFG_LONGHELP /* undef to save memory */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#ifdef CONFIG_CMD_KGDB # define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else # define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -154,7 +152,7 @@ #define CFG_MBAR 0xFC000000 -#define CFG_LATCH_ADDR (CFG_CS1_BASE + 0x80000) +#define CFG_LATCH_ADDR (CFG_CS1_BASE + 0x80000) /* * Low Level Configuration Settings @@ -168,7 +166,7 @@ #define CFG_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */ #define CFG_INIT_RAM_CTRL 0x221 #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_GBL_DATA_OFFSET ((CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) - 0x10) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET /*----------------------------------------------------------------------- @@ -198,7 +196,7 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) /*----------------------------------------------------------------------- * FLASH organization @@ -214,20 +212,19 @@ #endif #ifdef NANDFLASH_SIZE -# define CFG_MAX_NAND_DEVICE 1 -# define CFG_NAND_BASE (CFG_CS2_BASE << 16) -# define CFG_NAND_SIZE 1 -# define CFG_NAND_BASE_LIST { CFG_NAND_BASE } -# define NAND_MAX_CHIPS 1 -# define NAND_ALLOW_ERASE_ALL 1 -# define CONFIG_JFFS2_NAND 1 -# define CONFIG_JFFS2_DEV "nand0" -# define CONFIG_JFFS2_PART_SIZE (CFG_CS2_MASK & ~1) -# define CONFIG_JFFS2_PART_OFFSET 0x00000000 +# define CFG_MAX_NAND_DEVICE 1 +# define CFG_NAND_BASE (CFG_CS2_BASE << 16) +# define CFG_NAND_SIZE 1 +# define CFG_NAND_BASE_LIST { CFG_NAND_BASE } +# define NAND_MAX_CHIPS 1 +# define NAND_ALLOW_ERASE_ALL 1 +# define CONFIG_JFFS2_NAND 1 +# define CONFIG_JFFS2_DEV "nand0" +# define CONFIG_JFFS2_PART_SIZE (CFG_CS2_MASK & ~1) +# define CONFIG_JFFS2_PART_OFFSET 0x00000000 #endif -#define CFG_FLASH_BASE 0 -#define CFG_FLASH0_BASE (CFG_CS0_BASE << 16) +#define CFG_FLASH_BASE (CFG_CS0_BASE << 16) /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash @@ -267,6 +264,4 @@ #define CFG_CS2_CTRL 0x00001f60 #endif -#define CONFIG_UDP_CHECKSUM - #endif /* _M5329EVB_H */ diff --git a/lib_m68k/board.c b/lib_m68k/board.c index 395018c41f9..778ec788a81 100644 --- a/lib_m68k/board.c +++ b/lib_m68k/board.c @@ -692,7 +692,7 @@ void board_init_r (gd_t *id, ulong dest_addr) #endif #if defined(CONFIG_NET_MULTI) puts ("Net: "); - eth_initialize (bd); + eth_initialize (bd); #endif #endif diff --git a/lib_m68k/time.c b/lib_m68k/time.c index 3dbce07213e..6c19059e62b 100644 --- a/lib_m68k/time.c +++ b/lib_m68k/time.c @@ -347,10 +347,9 @@ void udelay(unsigned long usec) void dtimer_interrupt(void *not_used) { volatile dtmr_t *timerp = (dtmr_t *) (CFG_TMR_BASE); - volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE); /* check for timer interrupt asserted */ - if ((intp->iprh0 & CFG_TMRINTR_MASK) == CFG_TMRINTR_MASK) { + if ((CFG_TMRPND_REG & CFG_TMRINTR_MASK) == CFG_TMRINTR_PEND) { timerp->ter = (DTIM_DTER_CAP | DTIM_DTER_REF); timestamp++; return; diff --git a/rtc/mcfrtc.c b/rtc/mcfrtc.c index 0be587426c0..76bb5107f6a 100644 --- a/rtc/mcfrtc.c +++ b/rtc/mcfrtc.c @@ -28,7 +28,7 @@ #include #include -#if defined(CONFIG_MCFRTC) && (CONFIG_COMMANDS & CFG_CMD_DATE) +#if defined(CONFIG_MCFRTC) && defined(CONFIG_CMD_DATE) #undef RTC_DEBUG @@ -118,4 +118,4 @@ void rtc_reset(void) rtc->cr |= RTC_CR_SWR; } -#endif /* CONFIG_MCFRTC && CFG_CMD_DATE */ +#endif /* CONFIG_MCFRTC && CONFIG_CMD_DATE */ -- cgit v1.3.1 From 6706424d0bb851fb52af00cd1c3301e91ee7f2b0 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Wed, 15 Aug 2007 19:41:06 -0500 Subject: ColdFire: cobra5272 platform for MCF52x2 update Signed-off-by: TsiChungLiew --- board/cobra5272/Makefile | 2 +- board/cobra5272/cobra5272.c | 5 +- board/cobra5272/mii.c | 303 ++++++++++++++++++++++++++++++++++++++++++++ include/configs/cobra5272.h | 26 +++- 4 files changed, 331 insertions(+), 5 deletions(-) create mode 100644 board/cobra5272/mii.c (limited to 'include/configs') diff --git a/board/cobra5272/Makefile b/board/cobra5272/Makefile index cf07cf40fdb..be704b76f0c 100644 --- a/board/cobra5272/Makefile +++ b/board/cobra5272/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o mii.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/cobra5272/cobra5272.c b/board/cobra5272/cobra5272.c index 26adb4abb1f..86c7ee1eec0 100644 --- a/board/cobra5272/cobra5272.c +++ b/board/cobra5272/cobra5272.c @@ -22,8 +22,7 @@ */ #include -#include -#include +#include int checkboard (void) @@ -35,7 +34,7 @@ int checkboard (void) long int initdram (int board_type) { - volatile sdramctrl_t *sdp = (sdramctrl_t *) (CFG_MBAR + MCFSIM_SDCR); + volatile sdramctrl_t *sdp = (sdramctrl_t *) (MMAP_SDRAM); sdp->sdram_sdtr = 0xf539; sdp->sdram_sdcr = 0x4211; diff --git a/board/cobra5272/mii.c b/board/cobra5272/mii.c new file mode 100644 index 00000000000..fadcbb3ef8d --- /dev/null +++ b/board/cobra5272/mii.c @@ -0,0 +1,303 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) +#undef MII_DEBUG +#undef ET_DEBUG + +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + if (setclear) { + gpio->gpio_pbcnt |= GPIO_PBCNT_E_MDC | GPIO_PBCNT_E_RXER | GPIO_PBCNT_E_RXD1 | GPIO_PBCNT_E_RXD2 | GPIO_PBCNT_E_RXD3 | GPIO_PBCNT_E_TXD1 | GPIO_PBCNT_E_TXD2 | GPIO_PBCNT_E_TXD3; + } else { + } + return 0; +} + +#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) +#include + +/* Make MII read/write commands for the FEC. */ +#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) + +#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) + +/* PHY identification */ +#define PHY_ID_LXT970 0x78100000 /* LXT970 */ +#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ +#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ +#define PHY_ID_QS6612 0x01814400 /* QS6612 */ +#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ +#define PHY_ID_AMD79C874VC 0x0022561B /* AMD 79C874 */ +#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ +#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ +#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ +#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ + +#define STR_ID_LXT970 "LXT970" +#define STR_ID_LXT971 "LXT971" +#define STR_ID_82555 "Intel82555" +#define STR_ID_QS6612 "QS6612" +#define STR_ID_AMD79C784 "AMD79C784" +#define STR_ID_AMD79C874VC "AMD79C874VC" +#define STR_ID_LSI80225 "LSI80225" +#define STR_ID_LSI80225B "LSI80225/B" +#define STR_ID_DP83848VV "N83848" +#define STR_ID_DP83849 "N83849" + +/**************************************************************************** + * mii_init -- Initialize the MII for MII command without ethernet + * This function is a subset of eth_init + **************************************************************************** + */ +void mii_reset(struct fec_info_s *info) +{ + volatile fec_t *fecp = (fec_t *) (info->miibase); + int i; + + fecp->ecr = FEC_ECR_RESET; + for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { + udelay(1); + } + if (i == FEC_RESET_DELAY) { + printf("FEC_RESET_DELAY timeout\n"); + } +} + +/* send command to phy using mii, wait for result */ +uint mii_send(uint mii_cmd) +{ + struct fec_info_s *info; + struct eth_device *dev; + volatile fec_t *ep; + uint mii_reply; + int j = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + ep = (fec_t *) info->miibase; + + ep->mmfr = mii_cmd; /* command to phy */ + + /* wait for mii complete */ + while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { + udelay(1); + j++; + } + if (j >= MCFFEC_TOUT_LOOP) { + printf("MII not complete\n"); + return -1; + } + + mii_reply = ep->mmfr; /* result from phy */ + ep->eir = FEC_EIR_MII; /* clear MII complete */ +#ifdef ET_DEBUG + printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", + __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); +#endif + + return (mii_reply & 0xffff); /* data read from phy */ +} +#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CONFIG_CMD_MII) */ + +#if defined(CFG_DISCOVER_PHY) +int mii_discover_phy(struct eth_device *dev) +{ +#define MAX_PHY_PASSES 11 + struct fec_info_s *info = dev->priv; + int phyaddr, pass; + uint phyno, phytype; + + if (info->phyname_init) + return info->phy_addr; + + phyaddr = -1; /* didn't find a PHY yet */ + for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { + if (pass > 1) { + /* PHY may need more time to recover from reset. + * The LXT970 needs 50ms typical, no maximum is + * specified, so wait 10ms before try again. + * With 11 passes this gives it 100ms to wake up. + */ + udelay(10000); /* wait 10ms */ + } + + for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { + + phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); +#ifdef ET_DEBUG + printf("PHY type 0x%x pass %d type\n", phytype, pass); +#endif + if (phytype != 0xffff) { + phyaddr = phyno; + phytype <<= 16; + phytype |= + mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); + + switch (phytype & 0xffffffff) { + case PHY_ID_AMD79C874VC: + strcpy(info->phy_name, + STR_ID_AMD79C874VC); + info->phyname_init = 1; + break; + default: + strcpy(info->phy_name, "unknown"); + info->phyname_init = 1; + break; + } + +#ifdef ET_DEBUG + printf("PHY @ 0x%x pass %d type ", phyno, pass); + switch (phytype & 0xffffffff) { + case PHY_ID_AMD79C874VC: + printf(STR_ID_AMD79C874VC); + break; + default: + printf("0x%08x\n", phytype); + break; + } +#endif + } + } + } + if (phyaddr < 0) + printf("No PHY device found.\n"); + + return phyaddr; +} +#endif /* CFG_DISCOVER_PHY */ + +int mii_init(void) __attribute__((weak,alias("__mii_init"))); + +void __mii_init(void) +{ + volatile fec_t *fecp; + struct fec_info_s *info; + struct eth_device *dev; + int miispd = 0, i = 0; + u16 autoneg = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + fecp = (fec_t *) info->miibase; + + fecpin_setclear(dev, 1); + + mii_reset(info); + + /* We use strictly polling mode only */ + fecp->eimr = 0; + + /* Clear any pending interrupt */ + fecp->eir = 0xffffffff; + + /* Set MII speed */ + miispd = (gd->bus_clk / 1000000) / 5; + fecp->mscr = miispd << 1; + + info->phy_addr = mii_discover_phy(dev); + +#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) + while (i < MCFFEC_TOUT_LOOP) { + autoneg = 0; + miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); + i++; + + if ((autoneg & AUTONEGLINK) == AUTONEGLINK) + break; + + udelay(500); + } + if (i >= MCFFEC_TOUT_LOOP) { + printf("Auto Negotiation not complete\n"); + } + + /* adapt to the half/full speed settings */ + info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; + info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); +} + +/***************************************************************************** + * Read and write a MII PHY register, routines used by MII Utilities + * + * FIXME: These routines are expected to return 0 on success, but mii_send + * does _not_ return an error code. Maybe 0xFFFF means error, i.e. + * no PHY connected... + * For now always return 0. + * FIXME: These routines only work after calling eth_init() at least once! + * Otherwise they hang in mii_send() !!! Sorry! + *****************************************************************************/ + +int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, + unsigned short *value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); +#endif + rdreg = mii_send(mk_mii_read(addr, reg)); + + *value = rdreg; + +#ifdef MII_DEBUG + printf("0x%04x\n", *value); +#endif + + return 0; +} + +int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, + unsigned short value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); +#endif + + rdreg = mii_send(mk_mii_write(addr, reg, value)); + +#ifdef MII_DEBUG + printf("0x%04x\n", value); +#endif + + return 0; +} + +#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index 510524ad36a..104d94ec141 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -65,8 +65,10 @@ * Enable use of Ethernet * --- */ +#define CONFIG_MCFFEC -#define FEC_ENET +/* Enable Dma Timer */ +#define CONFIG_MCFTMR /* --- * Define baudrate for UART1 (console output, tftp, ...) @@ -76,6 +78,8 @@ * --- */ +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) #define CONFIG_BAUDRATE 19200 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } @@ -151,6 +155,26 @@ #undef CONFIG_CMD_LOADB #undef CONFIG_CMD_MII +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_MULTI 1 +# define CONFIG_MII 1 +# define CFG_DISCOVER_PHY +# define CFG_RX_ETH_BUFFER 8 +# define CFG_FAULT_ECHO_LINK_DOWN + +# define CFG_FEC0_PINMUX 0 +# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 +/* If CFG_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CFG_DISCOVER_PHY +# define FECDUPLEX FULL +# define FECSPEED _100BASET +# else +# ifndef CFG_FAULT_ECHO_LINK_DOWN +# define CFG_FAULT_ECHO_LINK_DOWN +# endif +# endif /* CFG_DISCOVER_PHY */ +#endif /* *----------------------------------------------------------------------------- -- cgit v1.3.1 From 6cfd3c7bc813fb317ab7c0781f0d1874b1c0877c Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Wed, 15 Aug 2007 19:43:20 -0500 Subject: ColdFire: idmr platform MCF52x2 update Signed-off-by: TsiChungLiew --- board/idmr/Makefile | 2 +- board/idmr/idmr.c | 3 +- board/idmr/mii.c | 303 +++++++++++++++++++++++++++++++++++++++++++++++++ include/configs/idmr.h | 34 ++++-- 4 files changed, 332 insertions(+), 10 deletions(-) create mode 100644 board/idmr/mii.c (limited to 'include/configs') diff --git a/board/idmr/Makefile b/board/idmr/Makefile index cf07cf40fdb..be704b76f0c 100644 --- a/board/idmr/Makefile +++ b/board/idmr/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o mii.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/idmr/idmr.c b/board/idmr/idmr.c index 58cdba1e136..081c3753359 100644 --- a/board/idmr/idmr.c +++ b/board/idmr/idmr.c @@ -22,8 +22,7 @@ */ #include -#include -#include +#include int checkboard (void) { puts ("Board: iDMR\n"); diff --git a/board/idmr/mii.c b/board/idmr/mii.c new file mode 100644 index 00000000000..f6c63c302bc --- /dev/null +++ b/board/idmr/mii.c @@ -0,0 +1,303 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) +#undef MII_DEBUG +#undef ET_DEBUG + +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + if (setclear) { + /* Enable Ethernet pins */ + mbar_writeByte(MCF_GPIO_PAR_FECI2C, CFG_FECI2C); + } else { + } + + return 0; +} + +#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) +#include + +/* Make MII read/write commands for the FEC. */ +#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) + +#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) + +/* PHY identification */ +#define PHY_ID_LXT970 0x78100000 /* LXT970 */ +#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ +#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ +#define PHY_ID_QS6612 0x01814400 /* QS6612 */ +#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ +#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ +#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ +#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ +#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ +#define PHY_ID_KS8721BL 0x00221619 /* Micrel KS8721BL/SL */ + +#define STR_ID_LXT970 "LXT970" +#define STR_ID_LXT971 "LXT971" +#define STR_ID_82555 "Intel82555" +#define STR_ID_QS6612 "QS6612" +#define STR_ID_AMD79C784 "AMD79C784" +#define STR_ID_LSI80225 "LSI80225" +#define STR_ID_LSI80225B "LSI80225/B" +#define STR_ID_DP83848VV "N83848" +#define STR_ID_DP83849 "N83849" +#define STR_ID_KS8721BL "KS8721BL" + +/**************************************************************************** + * mii_init -- Initialize the MII for MII command without ethernet + * This function is a subset of eth_init + **************************************************************************** + */ +void mii_reset(struct fec_info_s *info) +{ + volatile fec_t *fecp = (fec_t *) (info->miibase); + int i; + + fecp->ecr = FEC_ECR_RESET; + for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { + udelay(1); + } + if (i == FEC_RESET_DELAY) { + printf("FEC_RESET_DELAY timeout\n"); + } +} + +/* send command to phy using mii, wait for result */ +uint mii_send(uint mii_cmd) +{ + struct fec_info_s *info; + struct eth_device *dev; + volatile fec_t *ep; + uint mii_reply; + int j = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + ep = (fec_t *) info->miibase; + + ep->mmfr = mii_cmd; /* command to phy */ + + /* wait for mii complete */ + while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { + udelay(1); + j++; + } + if (j >= MCFFEC_TOUT_LOOP) { + printf("MII not complete\n"); + return -1; + } + + mii_reply = ep->mmfr; /* result from phy */ + ep->eir = FEC_EIR_MII; /* clear MII complete */ +#ifdef ET_DEBUG + printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", + __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); +#endif + + return (mii_reply & 0xffff); /* data read from phy */ +} +#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CONFIG_CMD_MII) */ + +#if defined(CFG_DISCOVER_PHY) +int mii_discover_phy(struct eth_device *dev) +{ +#define MAX_PHY_PASSES 11 + struct fec_info_s *info = dev->priv; + int phyaddr, pass; + uint phyno, phytype; + + if (info->phyname_init) + return info->phy_addr; + + phyaddr = -1; /* didn't find a PHY yet */ + for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { + if (pass > 1) { + /* PHY may need more time to recover from reset. + * The LXT970 needs 50ms typical, no maximum is + * specified, so wait 10ms before try again. + * With 11 passes this gives it 100ms to wake up. + */ + udelay(10000); /* wait 10ms */ + } + + for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { + + phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); +#ifdef ET_DEBUG + printf("PHY type 0x%x pass %d type\n", phytype, pass); +#endif + if (phytype != 0xffff) { + phyaddr = phyno; + phytype <<= 16; + phytype |= + mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); + + switch (phytype & 0xffffffff) { + case PHY_ID_KS8721BL: + strcpy(info->phy_name, + STR_ID_KS8721BL); + info->phyname_init = 1; + break; + default: + strcpy(info->phy_name, "unknown"); + info->phyname_init = 1; + break; + } + +#ifdef ET_DEBUG + printf("PHY @ 0x%x pass %d type ", phyno, pass); + switch (phytype & 0xffffffff) { + case PHY_ID_KS8721BL: + printf(STR_ID_KS8721BL); + break; + default: + printf("0x%08x\n", phytype); + break; + } +#endif + } + } + } + if (phyaddr < 0) + printf("No PHY device found.\n"); + + return phyaddr; +} +#endif /* CFG_DISCOVER_PHY */ + +int mii_init(void) __attribute__((weak,alias("__mii_init"))); + +void __mii_init(void) +{ + volatile fec_t *fecp; + struct fec_info_s *info; + struct eth_device *dev; + int miispd = 0, i = 0; + u16 autoneg = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + fecp = (fec_t *) info->miibase; + + fecpin_setclear(dev, 1); + + mii_reset(info); + + /* We use strictly polling mode only */ + fecp->eimr = 0; + + /* Clear any pending interrupt */ + fecp->eir = 0xffffffff; + + /* Set MII speed */ + miispd = (gd->bus_clk / 1000000) / 5; + fecp->mscr = miispd << 1; + + info->phy_addr = mii_discover_phy(dev); + +#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) + while (i < MCFFEC_TOUT_LOOP) { + autoneg = 0; + miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); + i++; + + if ((autoneg & AUTONEGLINK) == AUTONEGLINK) + break; + + udelay(500); + } + if (i >= MCFFEC_TOUT_LOOP) { + printf("Auto Negotiation not complete\n"); + } + + /* adapt to the half/full speed settings */ + info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; + info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); +} + +/***************************************************************************** + * Read and write a MII PHY register, routines used by MII Utilities + * + * FIXME: These routines are expected to return 0 on success, but mii_send + * does _not_ return an error code. Maybe 0xFFFF means error, i.e. + * no PHY connected... + * For now always return 0. + * FIXME: These routines only work after calling eth_init() at least once! + * Otherwise they hang in mii_send() !!! Sorry! + *****************************************************************************/ + +int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, + unsigned short *value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); +#endif + rdreg = mii_send(mk_mii_read(addr, reg)); + + *value = rdreg; + +#ifdef MII_DEBUG + printf("0x%04x\n", *value); +#endif + + return 0; +} + +int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, + unsigned short value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); +#endif + + rdreg = mii_send(mk_mii_write(addr, reg, value)); + +#ifdef MII_DEBUG + printf("0x%04x\n", value); +#endif + + return 0; +} + +#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/include/configs/idmr.h b/include/configs/idmr.h index 1ab7b27a5d8..3ec4a79440f 100644 --- a/include/configs/idmr.h +++ b/include/configs/idmr.h @@ -44,6 +44,8 @@ */ #define CONFIG_BOOTCOMMAND "run net_nfs" #define CONFIG_BOOTDELAY 5 +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) #define CONFIG_BAUDRATE 19200 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #define CONFIG_ETHADDR 00:06:3b:01:41:55 @@ -58,6 +60,8 @@ #define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root " \ "filesystem over NFS; echo" +#define CONFIG_MCFTMR + #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ @@ -147,11 +151,27 @@ /* * Ethernet */ -#define FEC_ENET -#define CONFIG_NET_RETRY_COUNT 5 -#define CFG_ENET_BD_BASE 0x480000 -#define CFG_DISCOVER_PHY 1 +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_MULTI 1 #define CONFIG_MII 1 +# define CFG_DISCOVER_PHY +# define CFG_RX_ETH_BUFFER 8 +# define CFG_FAULT_ECHO_LINK_DOWN + +# define CFG_FEC0_PINMUX 0 +# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 +/* If CFG_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CFG_DISCOVER_PHY +# define FECDUPLEX FULL +# define FECSPEED _100BASET +# else +# ifndef CFG_FAULT_ECHO_LINK_DOWN +# define CFG_FAULT_ECHO_LINK_DOWN +# endif +# endif /* CFG_DISCOVER_PHY */ +#endif /* * Definitions for initial stack pointer and data area (in DPRAM) @@ -186,7 +206,7 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) /* FLASH organization */ #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ @@ -215,8 +235,8 @@ "2m(rootfs)," \ "-(user)"; -#if defined(CONFIG_CMD_MII) +#if (CONFIG_COMMANDS & CFG_CMD_MII) #error MII commands don't work on iDMR board and sholud not be enabled. -#endif +#endif /* (CONFIG_COMMANDS & CFG_CMD_MII) */ #endif /* _IDMR_H */ -- cgit v1.3.1 From a9505510bf56a9b5558248dd8b73ec9d9a1556a2 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Wed, 15 Aug 2007 19:45:51 -0500 Subject: ColdFire: update r5200 platform for MCF52x2 Signed-off-by: TsiChungLiew --- board/r5200/Makefile | 2 +- board/r5200/mii.c | 303 ++++++++++++++++++++++++++++++++++++++++++++++++ include/configs/r5200.h | 30 ++++- 3 files changed, 328 insertions(+), 7 deletions(-) create mode 100644 board/r5200/mii.c (limited to 'include/configs') diff --git a/board/r5200/Makefile b/board/r5200/Makefile index 424ab1cf9e3..2ec71ee1d27 100644 --- a/board/r5200/Makefile +++ b/board/r5200/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o +COBJS = $(BOARD).o mii.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/r5200/mii.c b/board/r5200/mii.c new file mode 100644 index 00000000000..706c90f6435 --- /dev/null +++ b/board/r5200/mii.c @@ -0,0 +1,303 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) +#undef MII_DEBUG +#undef ET_DEBUG + +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + if (setclear) { + /* Enable Ethernet pins */ + mbar_writeByte(MCF_GPIO_PAR_FECI2C, CFG_FECI2C); + } else { + } + + return 0; +} + +#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) +#include + +/* Make MII read/write commands for the FEC. */ +#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) + +#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) + +/* PHY identification */ +#define PHY_ID_LXT970 0x78100000 /* LXT970 */ +#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ +#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ +#define PHY_ID_QS6612 0x01814400 /* QS6612 */ +#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ +#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ +#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ +#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ +#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ +#define PHY_ID_KS8721BL 0x00221619 /* Micrel KS8721BL/SL */ + +#define STR_ID_LXT970 "LXT970" +#define STR_ID_LXT971 "LXT971" +#define STR_ID_82555 "Intel82555" +#define STR_ID_QS6612 "QS6612" +#define STR_ID_AMD79C784 "AMD79C784" +#define STR_ID_LSI80225 "LSI80225" +#define STR_ID_LSI80225B "LSI80225/B" +#define STR_ID_DP83848VV "N83848" +#define STR_ID_DP83849 "N83849" +#define STR_ID_KS8721BL "KS8721BL" + +/**************************************************************************** + * mii_init -- Initialize the MII for MII command without ethernet + * This function is a subset of eth_init + **************************************************************************** + */ +void mii_reset(struct fec_info_s *info) +{ + volatile fec_t *fecp = (fec_t *) (info->miibase); + int i; + + fecp->ecr = FEC_ECR_RESET; + for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { + udelay(1); + } + if (i == FEC_RESET_DELAY) { + printf("FEC_RESET_DELAY timeout\n"); + } +} + +/* send command to phy using mii, wait for result */ +uint mii_send(uint mii_cmd) +{ + struct fec_info_s *info; + struct eth_device *dev; + volatile fec_t *ep; + uint mii_reply; + int j = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + ep = (fec_t *) info->miibase; + + ep->mmfr = mii_cmd; /* command to phy */ + + /* wait for mii complete */ + while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { + udelay(1); + j++; + } + if (j >= MCFFEC_TOUT_LOOP) { + printf("MII not complete\n"); + return -1; + } + + mii_reply = ep->mmfr; /* result from phy */ + ep->eir = FEC_EIR_MII; /* clear MII complete */ +#ifdef ET_DEBUG + printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", + __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); +#endif + + return (mii_reply & 0xffff); /* data read from phy */ +} +#endif /* CFG_DISCOVER_PHY || (CONFIG_CMD_MII) */ + +#if defined(CFG_DISCOVER_PHY) +int mii_discover_phy(struct eth_device *dev) +{ +#define MAX_PHY_PASSES 11 + struct fec_info_s *info = dev->priv; + int phyaddr, pass; + uint phyno, phytype; + + if (info->phyname_init) + return info->phy_addr; + + phyaddr = -1; /* didn't find a PHY yet */ + for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { + if (pass > 1) { + /* PHY may need more time to recover from reset. + * The LXT970 needs 50ms typical, no maximum is + * specified, so wait 10ms before try again. + * With 11 passes this gives it 100ms to wake up. + */ + udelay(10000); /* wait 10ms */ + } + + for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { + + phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); +#ifdef ET_DEBUG + printf("PHY type 0x%x pass %d type\n", phytype, pass); +#endif + if (phytype != 0xffff) { + phyaddr = phyno; + phytype <<= 16; + phytype |= + mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); + + switch (phytype & 0xffffffff) { + case PHY_ID_KS8721BL: + strcpy(info->phy_name, + STR_ID_KS8721BL); + info->phyname_init = 1; + break; + default: + strcpy(info->phy_name, "unknown"); + info->phyname_init = 1; + break; + } + +#ifdef ET_DEBUG + printf("PHY @ 0x%x pass %d type ", phyno, pass); + switch (phytype & 0xffffffff) { + case PHY_ID_KS8721BL: + printf(STR_ID_KS8721BL); + break; + default: + printf("0x%08x\n", phytype); + break; + } +#endif + } + } + } + if (phyaddr < 0) + printf("No PHY device found.\n"); + + return phyaddr; +} +#endif /* CFG_DISCOVER_PHY */ + +int mii_init(void) __attribute__((weak,alias("__mii_init"))); + +void __mii_init(void) +{ + volatile fec_t *fecp; + struct fec_info_s *info; + struct eth_device *dev; + int miispd = 0, i = 0; + u16 autoneg = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + fecp = (fec_t *) info->miibase; + + fecpin_setclear(dev, 1); + + mii_reset(info); + + /* We use strictly polling mode only */ + fecp->eimr = 0; + + /* Clear any pending interrupt */ + fecp->eir = 0xffffffff; + + /* Set MII speed */ + miispd = (gd->bus_clk / 1000000) / 5; + fecp->mscr = miispd << 1; + + info->phy_addr = mii_discover_phy(dev); + +#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) + while (i < MCFFEC_TOUT_LOOP) { + autoneg = 0; + miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); + i++; + + if ((autoneg & AUTONEGLINK) == AUTONEGLINK) + break; + + udelay(500); + } + if (i >= MCFFEC_TOUT_LOOP) { + printf("Auto Negotiation not complete\n"); + } + + /* adapt to the half/full speed settings */ + info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; + info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); +} + +/***************************************************************************** + * Read and write a MII PHY register, routines used by MII Utilities + * + * FIXME: These routines are expected to return 0 on success, but mii_send + * does _not_ return an error code. Maybe 0xFFFF means error, i.e. + * no PHY connected... + * For now always return 0. + * FIXME: These routines only work after calling eth_init() at least once! + * Otherwise they hang in mii_send() !!! Sorry! + *****************************************************************************/ + +int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, + unsigned short *value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); +#endif + rdreg = mii_send(mk_mii_read(addr, reg)); + + *value = rdreg; + +#ifdef MII_DEBUG + printf("0x%04x\n", *value); +#endif + + return 0; +} + +int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, + unsigned short value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); +#endif + + rdreg = mii_send(mk_mii_write(addr, reg, value)); + +#ifdef MII_DEBUG + printf("0x%04x\n", value); +#endif + + return 0; +} + +#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/include/configs/r5200.h b/include/configs/r5200.h index 0e743bb2e48..fc7658b9f2d 100644 --- a/include/configs/r5200.h +++ b/include/configs/r5200.h @@ -39,13 +39,10 @@ #define CONFIG_M5271 /* define processor type */ #define CONFIG_R5200 /* define board type */ -#define FEC_ENET -#define CONFIG_NET_RETRY_COUNT 5 - -#define CONFIG_IPADDR 192.168.0.172 -#define CONFIG_SERVERIP 192.168.0.148 -#define CONFIG_ETHADDR 00:06:3b:00:44:55 +#define CONFIG_MCFTMR +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) #define CONFIG_BAUDRATE 19200 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } @@ -87,6 +84,27 @@ #undef CONFIG_CMD_LOADS #undef CONFIG_CMD_LOADB +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_MULTI 1 +# define CONFIG_MII 1 +# define CFG_DISCOVER_PHY +# define CFG_RX_ETH_BUFFER 8 +# define CFG_FAULT_ECHO_LINK_DOWN + +# define CFG_FEC0_PINMUX 0 +# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 +/* If CFG_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CFG_DISCOVER_PHY +# define FECDUPLEX FULL +# define FECSPEED _100BASET +# else +# ifndef CFG_FAULT_ECHO_LINK_DOWN +# define CFG_FAULT_ECHO_LINK_DOWN +# endif +# endif /* CFG_DISCOVER_PHY */ +#endif /* Note: We only copy one sectors worth of application code from location * 10200000 for speed purposes. Increase the size if necessary */ -- cgit v1.3.1 From aa93d859d9b1fcd8eea52d51b06e86c38f72111b Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Wed, 15 Aug 2007 19:46:38 -0500 Subject: ColdFire: update TASREG platform for MCF52x2 Signed-off-by: TsiChungLiew --- include/configs/TASREG.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/configs') diff --git a/include/configs/TASREG.h b/include/configs/TASREG.h index 2b2ae01f635..dccdf0ca9b4 100644 --- a/include/configs/TASREG.h +++ b/include/configs/TASREG.h @@ -43,6 +43,10 @@ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ +#define CONFIG_MCFTMR + +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) #define CONFIG_BAUDRATE 19200 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } -- cgit v1.3.1 From 870470dbf6f4bb9864e0d97aeedbc17c167c6d1c Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Wed, 15 Aug 2007 19:55:10 -0500 Subject: ColdFire: Update EB+MCF-EV123 platform Signed-off-by: TsiChungLiew --- board/BuS/EB+MCF-EV123/Makefile | 2 +- board/BuS/EB+MCF-EV123/mii.c | 304 ++++++++++++++++++++++++++++++++++++++++ include/configs/EB+MCF-EV123.h | 41 +++++- 3 files changed, 340 insertions(+), 7 deletions(-) create mode 100644 board/BuS/EB+MCF-EV123/mii.c (limited to 'include/configs') diff --git a/board/BuS/EB+MCF-EV123/Makefile b/board/BuS/EB+MCF-EV123/Makefile index ed3ac075589..ceeffa77532 100644 --- a/board/BuS/EB+MCF-EV123/Makefile +++ b/board/BuS/EB+MCF-EV123/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o cfm_flash.o flash.o VCxK.o +COBJS = $(BOARD).o cfm_flash.o flash.o VCxK.o mii.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/BuS/EB+MCF-EV123/mii.c b/board/BuS/EB+MCF-EV123/mii.c new file mode 100644 index 00000000000..ebd3ed93874 --- /dev/null +++ b/board/BuS/EB+MCF-EV123/mii.c @@ -0,0 +1,304 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) +#undef MII_DEBUG +#undef ET_DEBUG + +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + if (setclear) { + MCFGPIO_PASPAR |= 0x0F00; + MCFGPIO_PEHLPAR = CFG_PEHLPAR; + } else { + MCFGPIO_PASPAR &= 0xF0FF; + MCFGPIO_PEHLPAR &= ~CFG_PEHLPAR; + } + return 0; +} + +#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) +#include + +/* Make MII read/write commands for the FEC. */ +#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) + +#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) + +/* PHY identification */ +#define PHY_ID_LXT970 0x78100000 /* LXT970 */ +#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ +#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ +#define PHY_ID_QS6612 0x01814400 /* QS6612 */ +#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ +#define PHY_ID_AMD79C874VC 0x0022561B /* AMD 79C874 */ +#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ +#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ +#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ +#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ + +#define STR_ID_LXT970 "LXT970" +#define STR_ID_LXT971 "LXT971" +#define STR_ID_82555 "Intel82555" +#define STR_ID_QS6612 "QS6612" +#define STR_ID_AMD79C784 "AMD79C784" +#define STR_ID_AMD79C874VC "AMD79C874VC" +#define STR_ID_LSI80225 "LSI80225" +#define STR_ID_LSI80225B "LSI80225/B" +#define STR_ID_DP83848VV "N83848" +#define STR_ID_DP83849 "N83849" + +/**************************************************************************** + * mii_init -- Initialize the MII for MII command without ethernet + * This function is a subset of eth_init + **************************************************************************** + */ +void mii_reset(struct fec_info_s *info) +{ + volatile fec_t *fecp = (fec_t *) (info->miibase); + int i; + + fecp->ecr = FEC_ECR_RESET; + for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { + udelay(1); + } + if (i == FEC_RESET_DELAY) { + printf("FEC_RESET_DELAY timeout\n"); + } +} + +/* send command to phy using mii, wait for result */ +uint mii_send(uint mii_cmd) +{ + struct fec_info_s *info; + struct eth_device *dev; + volatile fec_t *ep; + uint mii_reply; + int j = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + ep = (fec_t *) info->miibase; + + ep->mmfr = mii_cmd; /* command to phy */ + + /* wait for mii complete */ + while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { + udelay(1); + j++; + } + if (j >= MCFFEC_TOUT_LOOP) { + printf("MII not complete\n"); + return -1; + } + + mii_reply = ep->mmfr; /* result from phy */ + ep->eir = FEC_EIR_MII; /* clear MII complete */ +#ifdef ET_DEBUG + printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", + __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); +#endif + + return (mii_reply & 0xffff); /* data read from phy */ +} +#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CONFIG_CMD_MII) */ + +#if defined(CFG_DISCOVER_PHY) +int mii_discover_phy(struct eth_device *dev) +{ +#define MAX_PHY_PASSES 11 + struct fec_info_s *info = dev->priv; + int phyaddr, pass; + uint phyno, phytype; + + if (info->phyname_init) + return info->phy_addr; + + phyaddr = -1; /* didn't find a PHY yet */ + for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { + if (pass > 1) { + /* PHY may need more time to recover from reset. + * The LXT970 needs 50ms typical, no maximum is + * specified, so wait 10ms before try again. + * With 11 passes this gives it 100ms to wake up. + */ + udelay(10000); /* wait 10ms */ + } + + for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { + + phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); +#ifdef ET_DEBUG + printf("PHY type 0x%x pass %d type\n", phytype, pass); +#endif + if (phytype != 0xffff) { + phyaddr = phyno; + phytype <<= 16; + phytype |= + mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); + + switch (phytype & 0xffffffff) { + case PHY_ID_AMD79C874VC: + strcpy(info->phy_name, + STR_ID_AMD79C874VC); + info->phyname_init = 1; + break; + default: + strcpy(info->phy_name, "unknown"); + info->phyname_init = 1; + break; + } + +#ifdef ET_DEBUG + printf("PHY @ 0x%x pass %d type ", phyno, pass); + switch (phytype & 0xffffffff) { + case PHY_ID_AMD79C874VC: + printf(STR_ID_AMD79C874VC); + break; + default: + printf("0x%08x\n", phytype); + break; + } +#endif + } + } + } + if (phyaddr < 0) + printf("No PHY device found.\n"); + + return phyaddr; +} +#endif /* CFG_DISCOVER_PHY */ + +int mii_init(void) __attribute__((weak,alias("__mii_init"))); + +void __mii_init(void) +{ + volatile fec_t *fecp; + struct fec_info_s *info; + struct eth_device *dev; + int miispd = 0, i = 0; + u16 autoneg = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + fecp = (fec_t *) info->miibase; + + fecpin_setclear(dev, 1); + + mii_reset(info); + + /* We use strictly polling mode only */ + fecp->eimr = 0; + + /* Clear any pending interrupt */ + fecp->eir = 0xffffffff; + + /* Set MII speed */ + miispd = (gd->bus_clk / 1000000) / 5; + fecp->mscr = miispd << 1; + + info->phy_addr = mii_discover_phy(dev); + +#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) + while (i < MCFFEC_TOUT_LOOP) { + autoneg = 0; + miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); + i++; + + if ((autoneg & AUTONEGLINK) == AUTONEGLINK) + break; + + udelay(500); + } + if (i >= MCFFEC_TOUT_LOOP) { + printf("Auto Negotiation not complete\n"); + } + + /* adapt to the half/full speed settings */ + info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; + info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); +} + +/***************************************************************************** + * Read and write a MII PHY register, routines used by MII Utilities + * + * FIXME: These routines are expected to return 0 on success, but mii_send + * does _not_ return an error code. Maybe 0xFFFF means error, i.e. + * no PHY connected... + * For now always return 0. + * FIXME: These routines only work after calling eth_init() at least once! + * Otherwise they hang in mii_send() !!! Sorry! + *****************************************************************************/ + +int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, + unsigned short *value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); +#endif + rdreg = mii_send(mk_mii_read(addr, reg)); + + *value = rdreg; + +#ifdef MII_DEBUG + printf("0x%04x\n", *value); +#endif + + return 0; +} + +int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, + unsigned short value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); +#endif + + rdreg = mii_send(mk_mii_write(addr, reg, value)); + +#ifdef MII_DEBUG + printf("0x%04x\n", value); +#endif + + return 0; +} + +#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/include/configs/EB+MCF-EV123.h b/include/configs/EB+MCF-EV123.h index a8697ec88de..dae5295dd1b 100644 --- a/include/configs/EB+MCF-EV123.h +++ b/include/configs/EB+MCF-EV123.h @@ -40,9 +40,8 @@ #define CONFIG_MISC_INIT_R -#define FEC_ENET -#define CONFIG_ETHADDR 00:CF:52:82:EB:01 - +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) #define CONFIG_BAUDRATE 9600 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } @@ -84,7 +83,39 @@ #include #undef CONFIG_CMD_LOADB +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET + +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_MULTI 1 +# define CONFIG_MII 1 +# define CFG_DISCOVER_PHY +# define CFG_RX_ETH_BUFFER 8 +# define CFG_FAULT_ECHO_LINK_DOWN + +# define CFG_FEC0_PINMUX 0 +# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 +/* If CFG_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CFG_DISCOVER_PHY +# define FECDUPLEX FULL +# define FECSPEED _100BASET +# else +# ifndef CFG_FAULT_ECHO_LINK_DOWN +# define CFG_FAULT_ECHO_LINK_DOWN +# endif +# endif /* CFG_DISCOVER_PHY */ +#endif +#ifdef CONFIG_MCFFEC +# define CONFIG_ETHADDR 00:CF:52:82:EB:01 +# define CONFIG_IPADDR 192.162.1.2 +# define CONFIG_NETMASK 255.255.255.0 +# define CONFIG_SERVERIP 192.162.1.1 +# define CONFIG_GATEWAYIP 192.162.1.1 +# define CONFIG_OVERWRITE_ETHADDR_ONCE +#endif /* CONFIG_MCFFEC */ #define CONFIG_BOOTDELAY 5 #define CFG_PROMPT "\nEV123 U-Boot> " @@ -122,9 +153,6 @@ */ #define CFG_MBAR 0x40000000 -#define CFG_DISCOVER_PHY -/* #define CFG_ENET_BD_BASE 0x380000 */ - /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ @@ -151,6 +179,7 @@ #define CFG_FLASH_BASE 0xFFE00000 #define CFG_INT_FLASH_BASE 0xF0000000 +#define CFG_INT_FLASH_ENABLE 0x21 /* If M5282 port is fully implemented the monitor base will be behind * the vector table. */ -- cgit v1.3.1 From f28e1bd9daa6de5eb33ae4822bda6b008ccb4e9e Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Wed, 15 Aug 2007 20:32:06 -0500 Subject: ColdFire: Update Freescale MCF52x2 platforms Signed-off-by: TsiChungLiew --- board/m5271evb/Makefile | 2 +- board/m5271evb/m5271evb.c | 3 +- board/m5271evb/mii.c | 303 ++++++++++++++++++++++++++++++++++++ board/m5272c3/Makefile | 2 +- board/m5272c3/m5272c3.c | 7 +- board/m5272c3/mii.c | 303 ++++++++++++++++++++++++++++++++++++ board/m5282evb/Makefile | 2 +- board/m5282evb/config.mk | 2 +- board/m5282evb/flash.c | 378 --------------------------------------------- board/m5282evb/m5282evb.c | 61 +++++++- board/m5282evb/mii.c | 304 ++++++++++++++++++++++++++++++++++++ include/configs/M5271EVB.h | 100 +++++++++--- include/configs/M5272C3.h | 105 ++++++++----- include/configs/M5282EVB.h | 147 ++++++++++++++---- 14 files changed, 1238 insertions(+), 481 deletions(-) create mode 100644 board/m5271evb/mii.c create mode 100644 board/m5272c3/mii.c delete mode 100644 board/m5282evb/flash.c create mode 100644 board/m5282evb/mii.c (limited to 'include/configs') diff --git a/board/m5271evb/Makefile b/board/m5271evb/Makefile index 424ab1cf9e3..2ec71ee1d27 100644 --- a/board/m5271evb/Makefile +++ b/board/m5271evb/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o +COBJS = $(BOARD).o mii.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/m5271evb/m5271evb.c b/board/m5271evb/m5271evb.c index c26c91d1b73..9caad6325a5 100644 --- a/board/m5271evb/m5271evb.c +++ b/board/m5271evb/m5271evb.c @@ -22,8 +22,7 @@ */ #include -#include -#include +#include int checkboard (void) { puts ("Board: Freescale M5271EVB\n"); diff --git a/board/m5271evb/mii.c b/board/m5271evb/mii.c new file mode 100644 index 00000000000..f6c63c302bc --- /dev/null +++ b/board/m5271evb/mii.c @@ -0,0 +1,303 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) +#undef MII_DEBUG +#undef ET_DEBUG + +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + if (setclear) { + /* Enable Ethernet pins */ + mbar_writeByte(MCF_GPIO_PAR_FECI2C, CFG_FECI2C); + } else { + } + + return 0; +} + +#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) +#include + +/* Make MII read/write commands for the FEC. */ +#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) + +#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) + +/* PHY identification */ +#define PHY_ID_LXT970 0x78100000 /* LXT970 */ +#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ +#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ +#define PHY_ID_QS6612 0x01814400 /* QS6612 */ +#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ +#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ +#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ +#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ +#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ +#define PHY_ID_KS8721BL 0x00221619 /* Micrel KS8721BL/SL */ + +#define STR_ID_LXT970 "LXT970" +#define STR_ID_LXT971 "LXT971" +#define STR_ID_82555 "Intel82555" +#define STR_ID_QS6612 "QS6612" +#define STR_ID_AMD79C784 "AMD79C784" +#define STR_ID_LSI80225 "LSI80225" +#define STR_ID_LSI80225B "LSI80225/B" +#define STR_ID_DP83848VV "N83848" +#define STR_ID_DP83849 "N83849" +#define STR_ID_KS8721BL "KS8721BL" + +/**************************************************************************** + * mii_init -- Initialize the MII for MII command without ethernet + * This function is a subset of eth_init + **************************************************************************** + */ +void mii_reset(struct fec_info_s *info) +{ + volatile fec_t *fecp = (fec_t *) (info->miibase); + int i; + + fecp->ecr = FEC_ECR_RESET; + for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { + udelay(1); + } + if (i == FEC_RESET_DELAY) { + printf("FEC_RESET_DELAY timeout\n"); + } +} + +/* send command to phy using mii, wait for result */ +uint mii_send(uint mii_cmd) +{ + struct fec_info_s *info; + struct eth_device *dev; + volatile fec_t *ep; + uint mii_reply; + int j = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + ep = (fec_t *) info->miibase; + + ep->mmfr = mii_cmd; /* command to phy */ + + /* wait for mii complete */ + while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { + udelay(1); + j++; + } + if (j >= MCFFEC_TOUT_LOOP) { + printf("MII not complete\n"); + return -1; + } + + mii_reply = ep->mmfr; /* result from phy */ + ep->eir = FEC_EIR_MII; /* clear MII complete */ +#ifdef ET_DEBUG + printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", + __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); +#endif + + return (mii_reply & 0xffff); /* data read from phy */ +} +#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CONFIG_CMD_MII) */ + +#if defined(CFG_DISCOVER_PHY) +int mii_discover_phy(struct eth_device *dev) +{ +#define MAX_PHY_PASSES 11 + struct fec_info_s *info = dev->priv; + int phyaddr, pass; + uint phyno, phytype; + + if (info->phyname_init) + return info->phy_addr; + + phyaddr = -1; /* didn't find a PHY yet */ + for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { + if (pass > 1) { + /* PHY may need more time to recover from reset. + * The LXT970 needs 50ms typical, no maximum is + * specified, so wait 10ms before try again. + * With 11 passes this gives it 100ms to wake up. + */ + udelay(10000); /* wait 10ms */ + } + + for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { + + phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); +#ifdef ET_DEBUG + printf("PHY type 0x%x pass %d type\n", phytype, pass); +#endif + if (phytype != 0xffff) { + phyaddr = phyno; + phytype <<= 16; + phytype |= + mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); + + switch (phytype & 0xffffffff) { + case PHY_ID_KS8721BL: + strcpy(info->phy_name, + STR_ID_KS8721BL); + info->phyname_init = 1; + break; + default: + strcpy(info->phy_name, "unknown"); + info->phyname_init = 1; + break; + } + +#ifdef ET_DEBUG + printf("PHY @ 0x%x pass %d type ", phyno, pass); + switch (phytype & 0xffffffff) { + case PHY_ID_KS8721BL: + printf(STR_ID_KS8721BL); + break; + default: + printf("0x%08x\n", phytype); + break; + } +#endif + } + } + } + if (phyaddr < 0) + printf("No PHY device found.\n"); + + return phyaddr; +} +#endif /* CFG_DISCOVER_PHY */ + +int mii_init(void) __attribute__((weak,alias("__mii_init"))); + +void __mii_init(void) +{ + volatile fec_t *fecp; + struct fec_info_s *info; + struct eth_device *dev; + int miispd = 0, i = 0; + u16 autoneg = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + fecp = (fec_t *) info->miibase; + + fecpin_setclear(dev, 1); + + mii_reset(info); + + /* We use strictly polling mode only */ + fecp->eimr = 0; + + /* Clear any pending interrupt */ + fecp->eir = 0xffffffff; + + /* Set MII speed */ + miispd = (gd->bus_clk / 1000000) / 5; + fecp->mscr = miispd << 1; + + info->phy_addr = mii_discover_phy(dev); + +#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) + while (i < MCFFEC_TOUT_LOOP) { + autoneg = 0; + miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); + i++; + + if ((autoneg & AUTONEGLINK) == AUTONEGLINK) + break; + + udelay(500); + } + if (i >= MCFFEC_TOUT_LOOP) { + printf("Auto Negotiation not complete\n"); + } + + /* adapt to the half/full speed settings */ + info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; + info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); +} + +/***************************************************************************** + * Read and write a MII PHY register, routines used by MII Utilities + * + * FIXME: These routines are expected to return 0 on success, but mii_send + * does _not_ return an error code. Maybe 0xFFFF means error, i.e. + * no PHY connected... + * For now always return 0. + * FIXME: These routines only work after calling eth_init() at least once! + * Otherwise they hang in mii_send() !!! Sorry! + *****************************************************************************/ + +int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, + unsigned short *value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); +#endif + rdreg = mii_send(mk_mii_read(addr, reg)); + + *value = rdreg; + +#ifdef MII_DEBUG + printf("0x%04x\n", *value); +#endif + + return 0; +} + +int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, + unsigned short value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); +#endif + + rdreg = mii_send(mk_mii_write(addr, reg, value)); + +#ifdef MII_DEBUG + printf("0x%04x\n", value); +#endif + + return 0; +} + +#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/m5272c3/Makefile b/board/m5272c3/Makefile index cf07cf40fdb..be704b76f0c 100644 --- a/board/m5272c3/Makefile +++ b/board/m5272c3/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o flash.o mii.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/m5272c3/m5272c3.c b/board/m5272c3/m5272c3.c index 0dfeaf24f59..6dcda4f2541 100644 --- a/board/m5272c3/m5272c3.c +++ b/board/m5272c3/m5272c3.c @@ -22,18 +22,17 @@ */ #include -#include -#include +#include int checkboard (void) { puts ("Board: "); - puts("MOTOROLA MCF5272C3 EVB\n"); + puts ("Freescale MCF5272C3 EVB\n"); return 0; }; long int initdram (int board_type) { - volatile sdramctrl_t * sdp = (sdramctrl_t *)(CFG_MBAR + MCFSIM_SDCR); + volatile sdramctrl_t * sdp = (sdramctrl_t *)(MMAP_SDRAM); sdp->sdram_sdtr = 0xf539; sdp->sdram_sdcr = 0x4211; diff --git a/board/m5272c3/mii.c b/board/m5272c3/mii.c new file mode 100644 index 00000000000..fadcbb3ef8d --- /dev/null +++ b/board/m5272c3/mii.c @@ -0,0 +1,303 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) +#undef MII_DEBUG +#undef ET_DEBUG + +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + if (setclear) { + gpio->gpio_pbcnt |= GPIO_PBCNT_E_MDC | GPIO_PBCNT_E_RXER | GPIO_PBCNT_E_RXD1 | GPIO_PBCNT_E_RXD2 | GPIO_PBCNT_E_RXD3 | GPIO_PBCNT_E_TXD1 | GPIO_PBCNT_E_TXD2 | GPIO_PBCNT_E_TXD3; + } else { + } + return 0; +} + +#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) +#include + +/* Make MII read/write commands for the FEC. */ +#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) + +#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) + +/* PHY identification */ +#define PHY_ID_LXT970 0x78100000 /* LXT970 */ +#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ +#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ +#define PHY_ID_QS6612 0x01814400 /* QS6612 */ +#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ +#define PHY_ID_AMD79C874VC 0x0022561B /* AMD 79C874 */ +#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ +#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ +#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ +#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ + +#define STR_ID_LXT970 "LXT970" +#define STR_ID_LXT971 "LXT971" +#define STR_ID_82555 "Intel82555" +#define STR_ID_QS6612 "QS6612" +#define STR_ID_AMD79C784 "AMD79C784" +#define STR_ID_AMD79C874VC "AMD79C874VC" +#define STR_ID_LSI80225 "LSI80225" +#define STR_ID_LSI80225B "LSI80225/B" +#define STR_ID_DP83848VV "N83848" +#define STR_ID_DP83849 "N83849" + +/**************************************************************************** + * mii_init -- Initialize the MII for MII command without ethernet + * This function is a subset of eth_init + **************************************************************************** + */ +void mii_reset(struct fec_info_s *info) +{ + volatile fec_t *fecp = (fec_t *) (info->miibase); + int i; + + fecp->ecr = FEC_ECR_RESET; + for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { + udelay(1); + } + if (i == FEC_RESET_DELAY) { + printf("FEC_RESET_DELAY timeout\n"); + } +} + +/* send command to phy using mii, wait for result */ +uint mii_send(uint mii_cmd) +{ + struct fec_info_s *info; + struct eth_device *dev; + volatile fec_t *ep; + uint mii_reply; + int j = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + ep = (fec_t *) info->miibase; + + ep->mmfr = mii_cmd; /* command to phy */ + + /* wait for mii complete */ + while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { + udelay(1); + j++; + } + if (j >= MCFFEC_TOUT_LOOP) { + printf("MII not complete\n"); + return -1; + } + + mii_reply = ep->mmfr; /* result from phy */ + ep->eir = FEC_EIR_MII; /* clear MII complete */ +#ifdef ET_DEBUG + printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", + __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); +#endif + + return (mii_reply & 0xffff); /* data read from phy */ +} +#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CONFIG_CMD_MII) */ + +#if defined(CFG_DISCOVER_PHY) +int mii_discover_phy(struct eth_device *dev) +{ +#define MAX_PHY_PASSES 11 + struct fec_info_s *info = dev->priv; + int phyaddr, pass; + uint phyno, phytype; + + if (info->phyname_init) + return info->phy_addr; + + phyaddr = -1; /* didn't find a PHY yet */ + for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { + if (pass > 1) { + /* PHY may need more time to recover from reset. + * The LXT970 needs 50ms typical, no maximum is + * specified, so wait 10ms before try again. + * With 11 passes this gives it 100ms to wake up. + */ + udelay(10000); /* wait 10ms */ + } + + for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { + + phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); +#ifdef ET_DEBUG + printf("PHY type 0x%x pass %d type\n", phytype, pass); +#endif + if (phytype != 0xffff) { + phyaddr = phyno; + phytype <<= 16; + phytype |= + mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); + + switch (phytype & 0xffffffff) { + case PHY_ID_AMD79C874VC: + strcpy(info->phy_name, + STR_ID_AMD79C874VC); + info->phyname_init = 1; + break; + default: + strcpy(info->phy_name, "unknown"); + info->phyname_init = 1; + break; + } + +#ifdef ET_DEBUG + printf("PHY @ 0x%x pass %d type ", phyno, pass); + switch (phytype & 0xffffffff) { + case PHY_ID_AMD79C874VC: + printf(STR_ID_AMD79C874VC); + break; + default: + printf("0x%08x\n", phytype); + break; + } +#endif + } + } + } + if (phyaddr < 0) + printf("No PHY device found.\n"); + + return phyaddr; +} +#endif /* CFG_DISCOVER_PHY */ + +int mii_init(void) __attribute__((weak,alias("__mii_init"))); + +void __mii_init(void) +{ + volatile fec_t *fecp; + struct fec_info_s *info; + struct eth_device *dev; + int miispd = 0, i = 0; + u16 autoneg = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + fecp = (fec_t *) info->miibase; + + fecpin_setclear(dev, 1); + + mii_reset(info); + + /* We use strictly polling mode only */ + fecp->eimr = 0; + + /* Clear any pending interrupt */ + fecp->eir = 0xffffffff; + + /* Set MII speed */ + miispd = (gd->bus_clk / 1000000) / 5; + fecp->mscr = miispd << 1; + + info->phy_addr = mii_discover_phy(dev); + +#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) + while (i < MCFFEC_TOUT_LOOP) { + autoneg = 0; + miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); + i++; + + if ((autoneg & AUTONEGLINK) == AUTONEGLINK) + break; + + udelay(500); + } + if (i >= MCFFEC_TOUT_LOOP) { + printf("Auto Negotiation not complete\n"); + } + + /* adapt to the half/full speed settings */ + info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; + info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); +} + +/***************************************************************************** + * Read and write a MII PHY register, routines used by MII Utilities + * + * FIXME: These routines are expected to return 0 on success, but mii_send + * does _not_ return an error code. Maybe 0xFFFF means error, i.e. + * no PHY connected... + * For now always return 0. + * FIXME: These routines only work after calling eth_init() at least once! + * Otherwise they hang in mii_send() !!! Sorry! + *****************************************************************************/ + +int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, + unsigned short *value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); +#endif + rdreg = mii_send(mk_mii_read(addr, reg)); + + *value = rdreg; + +#ifdef MII_DEBUG + printf("0x%04x\n", *value); +#endif + + return 0; +} + +int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, + unsigned short value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); +#endif + + rdreg = mii_send(mk_mii_write(addr, reg, value)); + +#ifdef MII_DEBUG + printf("0x%04x\n", value); +#endif + + return 0; +} + +#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/m5282evb/Makefile b/board/m5282evb/Makefile index cf07cf40fdb..2ec71ee1d27 100644 --- a/board/m5282evb/Makefile +++ b/board/m5282evb/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o mii.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/m5282evb/config.mk b/board/m5282evb/config.mk index 848430736b1..0aa236122f4 100644 --- a/board/m5282evb/config.mk +++ b/board/m5282evb/config.mk @@ -22,4 +22,4 @@ # MA 02111-1307 USA # -TEXT_BASE = 0x20000 +TEXT_BASE = 0xFFE00000 diff --git a/board/m5282evb/flash.c b/board/m5282evb/flash.c deleted file mode 100644 index 36a7c310f90..00000000000 --- a/board/m5282evb/flash.c +++ /dev/null @@ -1,378 +0,0 @@ -/* - * (C) Copyright 2000-2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include - -#define PHYS_FLASH_1 CFG_FLASH_BASE -#define FLASH_BANK_SIZE 0x200000 - -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; - -void flash_print_info (flash_info_t * info) -{ - int i; - - switch (info->flash_id & FLASH_VENDMASK) { - case (AMD_MANUFACT & FLASH_VENDMASK): - printf ("AMD: "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case (AMD_ID_PL160CB & FLASH_TYPEMASK): - printf ("AM29PL160CB (16Mbit)\n"); - break; - default: - printf ("Unknown Chip Type\n"); - goto Done; - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; i++) { - if ((i % 5) == 0) { - printf ("\n "); - } - printf (" %08lX%s", info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); - - Done: - return; -} - - -unsigned long flash_init (void) -{ - int i, j; - ulong size = 0; - - for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { - ulong flashbase = 0; - - flash_info[i].flash_id = - (AMD_MANUFACT & FLASH_VENDMASK) | - (AMD_ID_PL160CB & FLASH_TYPEMASK); - flash_info[i].size = FLASH_BANK_SIZE; - flash_info[i].sector_count = CFG_MAX_FLASH_SECT; - memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); - if (i == 0) - flashbase = PHYS_FLASH_1; - else - panic ("configured to many flash banks!\n"); - - for (j = 0; j < flash_info[i].sector_count; j++) { - if (j == 0) { - /* 1st is 16 KiB */ - flash_info[i].start[j] = flashbase; - } - if ((j >= 1) && (j <= 2)) { - /* 2nd and 3rd are 8 KiB */ - flash_info[i].start[j] = - flashbase + 0x4000 + 0x2000 * (j - 1); - } - if (j == 3) { - /* 4th is 32 KiB */ - flash_info[i].start[j] = flashbase + 0x8000; - } - if ((j >= 4) && (j <= 34)) { - /* rest is 256 KiB */ - flash_info[i].start[j] = - flashbase + 0x10000 + 0x10000 * (j - - 4); - } - } - size += flash_info[i].size; - } - - flash_protect (FLAG_PROTECT_SET, - CFG_FLASH_BASE, - CFG_FLASH_BASE + 0xffff, &flash_info[0]); - - return size; -} - - -#define CMD_READ_ARRAY 0x00F0 -#define CMD_UNLOCK1 0x00AA -#define CMD_UNLOCK2 0x0055 -#define CMD_ERASE_SETUP 0x0080 -#define CMD_ERASE_CONFIRM 0x0030 -#define CMD_PROGRAM 0x00A0 -#define CMD_UNLOCK_BYPASS 0x0020 - -#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00000555<<1))) -#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CFG_FLASH_BASE + (0x000002AA<<1))) - -#define BIT_ERASE_DONE 0x0080 -#define BIT_RDY_MASK 0x0080 -#define BIT_PROGRAM_ERROR 0x0020 -#define BIT_TIMEOUT 0x80000000 /* our flag */ - -#define READY 1 -#define ERR 2 -#define TMO 4 - - -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - ulong result; - int iflag, cflag, prot, sect; - int rc = ERR_OK; - int chip1; - - /* first look for protection bits */ - - if (info->flash_id == FLASH_UNKNOWN) - return ERR_UNKNOWN_FLASH_TYPE; - - if ((s_first < 0) || (s_first > s_last)) { - return ERR_INVAL; - } - - if ((info->flash_id & FLASH_VENDMASK) != - (AMD_MANUFACT & FLASH_VENDMASK)) { - return ERR_UNKNOWN_FLASH_VENDOR; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - if (prot) - return ERR_PROTECTED; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - - cflag = icache_status (); - icache_disable (); - iflag = disable_interrupts (); - - printf ("\n"); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { - printf ("Erasing sector %2d ... ", sect); - - /* arm simple, non interrupt dependent timer */ - set_timer (0); - - if (info->protect[sect] == 0) { /* not protected */ - volatile u16 *addr = - (volatile u16 *) (info->start[sect]); - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - *addr = CMD_ERASE_CONFIRM; - - /* wait until flash is ready */ - chip1 = 0; - - do { - result = *addr; - - /* check timeout */ - if (get_timer (0) > CFG_FLASH_ERASE_TOUT) { - MEM_FLASH_ADDR1 = CMD_READ_ARRAY; - chip1 = TMO; - break; - } - - if (!chip1 - && (result & 0xFFFF) & BIT_ERASE_DONE) - chip1 = READY; - - } while (!chip1); - - MEM_FLASH_ADDR1 = CMD_READ_ARRAY; - - if (chip1 == ERR) { - rc = ERR_PROG_ERROR; - goto outahere; - } - if (chip1 == TMO) { - rc = ERR_TIMOUT; - goto outahere; - } - - printf ("ok.\n"); - } else { /* it was protected */ - - printf ("protected!\n"); - } - } - - if (ctrlc ()) - printf ("User Interrupt!\n"); - - outahere: - /* allow flash to settle - wait 10 ms */ - udelay (10000); - - if (iflag) - enable_interrupts (); - - if (cflag) - icache_enable (); - - return rc; -} - -static int write_word (flash_info_t * info, ulong dest, ulong data) -{ - volatile u16 *addr = (volatile u16 *) dest; - ulong result; - int rc = ERR_OK; - int cflag, iflag; - int chip1; - - /* - * Check if Flash is (sufficiently) erased - */ - result = *addr; - if ((result & data) != data) - return ERR_NOT_ERASED; - - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - - cflag = icache_status (); - icache_disable (); - iflag = disable_interrupts (); - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - MEM_FLASH_ADDR1 = CMD_PROGRAM; - *addr = data; - - /* arm simple, non interrupt dependent timer */ - set_timer (0); - - /* wait until flash is ready */ - chip1 = 0; - do { - result = *addr; - - /* check timeout */ - if (get_timer (0) > CFG_FLASH_ERASE_TOUT) { - chip1 = ERR | TMO; - break; - } - if (!chip1 && ((result & 0x80) == (data & 0x80))) - chip1 = READY; - - } while (!chip1); - - *addr = CMD_READ_ARRAY; - - if (chip1 == ERR || *addr != data) - rc = ERR_PROG_ERROR; - - if (iflag) - enable_interrupts (); - - if (cflag) - icache_enable (); - - return rc; -} - - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong wp, data; - int rc; - - if (addr & 1) { - printf ("unaligned destination not supported\n"); - return ERR_ALIGN; - } - -#if 0 - if (cnt & 1) { - printf ("odd transfer sizes not supported\n"); - return ERR_ALIGN; - } -#endif - - wp = addr; - - if (addr & 1) { - data = (*((volatile u8 *) addr) << 8) | *((volatile u8 *) - src); - if ((rc = write_word (info, wp - 1, data)) != 0) { - return (rc); - } - src += 1; - wp += 1; - cnt -= 1; - } - - while (cnt >= 2) { - data = *((volatile u16 *) src); - if ((rc = write_word (info, wp, data)) != 0) { - return (rc); - } - src += 2; - wp += 2; - cnt -= 2; - } - - if (cnt == 1) { - data = (*((volatile u8 *) src) << 8) | - *((volatile u8 *) (wp + 1)); - if ((rc = write_word (info, wp, data)) != 0) { - return (rc); - } - src += 1; - wp += 1; - cnt -= 1; - } - - return ERR_OK; -} diff --git a/board/m5282evb/m5282evb.c b/board/m5282evb/m5282evb.c index a08af68ae33..243d6a4d83e 100644 --- a/board/m5282evb/m5282evb.c +++ b/board/m5282evb/m5282evb.c @@ -22,14 +22,71 @@ */ #include +#include + +DECLARE_GLOBAL_DATA_PTR; int checkboard (void) { - puts ("MOTOROLA M5272EVB Evaluation Board\n"); + puts ("Board: Freescale M5282EVB Evaluation Board\n"); return 0; } long int initdram (int board_type) { - return 0x1000000; + u32 dramsize, i, dramclk; + + dramsize = CFG_SDRAM_SIZE * 0x100000; + for (i = 0x13; i < 0x20; i++) { + if (dramsize == (1 << i)) + break; + } + i--; + + if (!(MCFSDRAMC_DACR0 & MCFSDRAMC_DACR_RE)) + { + dramclk = gd->bus_clk / (CFG_HZ * CFG_HZ); + + /* Initialize DRAM Control Register: DCR */ + MCFSDRAMC_DCR = (0 + | MCFSDRAMC_DCR_RTIM_6 + | MCFSDRAMC_DCR_RC((15 * dramclk)>>4)); + + /* Initialize DACR0 */ + MCFSDRAMC_DACR0 = (0 + | MCFSDRAMC_DACR_BASE(CFG_SDRAM_BASE) + | MCFSDRAMC_DACR_CASL(1) + | MCFSDRAMC_DACR_CBM(3) + | MCFSDRAMC_DACR_PS_32); + + /* Initialize DMR0 */ + MCFSDRAMC_DMR0 = (0 + | ((dramsize - 1) & 0xFFFC0000) + | MCFSDRAMC_DMR_V); + + /* Set IP (bit 3) in DACR */ + MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_IP; + + /* Wait 30ns to allow banks to precharge */ + for (i = 0; i < 5; i++) { + asm ("nop"); + } + + /* Write to this block to initiate precharge */ + *(u32 *)(CFG_SDRAM_BASE) = 0xA5A59696; + + /* Set RE (bit 15) in DACR */ + MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_RE; + + /* Wait for at least 8 auto refresh cycles to occur */ + for (i = 0; i < 2000; i++) { + asm(" nop"); + } + + /* Finish the configuration by issuing the IMRS. */ + MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_IMRS; + + /* Write to the SDRAM Mode Register */ + *(u32 *)(CFG_SDRAM_BASE + 0x400) = 0xA5A59696; + } } diff --git a/board/m5282evb/mii.c b/board/m5282evb/mii.c new file mode 100644 index 00000000000..ebd3ed93874 --- /dev/null +++ b/board/m5282evb/mii.c @@ -0,0 +1,304 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) +#undef MII_DEBUG +#undef ET_DEBUG + +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + if (setclear) { + MCFGPIO_PASPAR |= 0x0F00; + MCFGPIO_PEHLPAR = CFG_PEHLPAR; + } else { + MCFGPIO_PASPAR &= 0xF0FF; + MCFGPIO_PEHLPAR &= ~CFG_PEHLPAR; + } + return 0; +} + +#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) +#include + +/* Make MII read/write commands for the FEC. */ +#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) + +#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) + +/* PHY identification */ +#define PHY_ID_LXT970 0x78100000 /* LXT970 */ +#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ +#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ +#define PHY_ID_QS6612 0x01814400 /* QS6612 */ +#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ +#define PHY_ID_AMD79C874VC 0x0022561B /* AMD 79C874 */ +#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ +#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ +#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ +#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ + +#define STR_ID_LXT970 "LXT970" +#define STR_ID_LXT971 "LXT971" +#define STR_ID_82555 "Intel82555" +#define STR_ID_QS6612 "QS6612" +#define STR_ID_AMD79C784 "AMD79C784" +#define STR_ID_AMD79C874VC "AMD79C874VC" +#define STR_ID_LSI80225 "LSI80225" +#define STR_ID_LSI80225B "LSI80225/B" +#define STR_ID_DP83848VV "N83848" +#define STR_ID_DP83849 "N83849" + +/**************************************************************************** + * mii_init -- Initialize the MII for MII command without ethernet + * This function is a subset of eth_init + **************************************************************************** + */ +void mii_reset(struct fec_info_s *info) +{ + volatile fec_t *fecp = (fec_t *) (info->miibase); + int i; + + fecp->ecr = FEC_ECR_RESET; + for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { + udelay(1); + } + if (i == FEC_RESET_DELAY) { + printf("FEC_RESET_DELAY timeout\n"); + } +} + +/* send command to phy using mii, wait for result */ +uint mii_send(uint mii_cmd) +{ + struct fec_info_s *info; + struct eth_device *dev; + volatile fec_t *ep; + uint mii_reply; + int j = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + ep = (fec_t *) info->miibase; + + ep->mmfr = mii_cmd; /* command to phy */ + + /* wait for mii complete */ + while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { + udelay(1); + j++; + } + if (j >= MCFFEC_TOUT_LOOP) { + printf("MII not complete\n"); + return -1; + } + + mii_reply = ep->mmfr; /* result from phy */ + ep->eir = FEC_EIR_MII; /* clear MII complete */ +#ifdef ET_DEBUG + printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", + __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); +#endif + + return (mii_reply & 0xffff); /* data read from phy */ +} +#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CONFIG_CMD_MII) */ + +#if defined(CFG_DISCOVER_PHY) +int mii_discover_phy(struct eth_device *dev) +{ +#define MAX_PHY_PASSES 11 + struct fec_info_s *info = dev->priv; + int phyaddr, pass; + uint phyno, phytype; + + if (info->phyname_init) + return info->phy_addr; + + phyaddr = -1; /* didn't find a PHY yet */ + for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { + if (pass > 1) { + /* PHY may need more time to recover from reset. + * The LXT970 needs 50ms typical, no maximum is + * specified, so wait 10ms before try again. + * With 11 passes this gives it 100ms to wake up. + */ + udelay(10000); /* wait 10ms */ + } + + for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { + + phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); +#ifdef ET_DEBUG + printf("PHY type 0x%x pass %d type\n", phytype, pass); +#endif + if (phytype != 0xffff) { + phyaddr = phyno; + phytype <<= 16; + phytype |= + mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); + + switch (phytype & 0xffffffff) { + case PHY_ID_AMD79C874VC: + strcpy(info->phy_name, + STR_ID_AMD79C874VC); + info->phyname_init = 1; + break; + default: + strcpy(info->phy_name, "unknown"); + info->phyname_init = 1; + break; + } + +#ifdef ET_DEBUG + printf("PHY @ 0x%x pass %d type ", phyno, pass); + switch (phytype & 0xffffffff) { + case PHY_ID_AMD79C874VC: + printf(STR_ID_AMD79C874VC); + break; + default: + printf("0x%08x\n", phytype); + break; + } +#endif + } + } + } + if (phyaddr < 0) + printf("No PHY device found.\n"); + + return phyaddr; +} +#endif /* CFG_DISCOVER_PHY */ + +int mii_init(void) __attribute__((weak,alias("__mii_init"))); + +void __mii_init(void) +{ + volatile fec_t *fecp; + struct fec_info_s *info; + struct eth_device *dev; + int miispd = 0, i = 0; + u16 autoneg = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + fecp = (fec_t *) info->miibase; + + fecpin_setclear(dev, 1); + + mii_reset(info); + + /* We use strictly polling mode only */ + fecp->eimr = 0; + + /* Clear any pending interrupt */ + fecp->eir = 0xffffffff; + + /* Set MII speed */ + miispd = (gd->bus_clk / 1000000) / 5; + fecp->mscr = miispd << 1; + + info->phy_addr = mii_discover_phy(dev); + +#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) + while (i < MCFFEC_TOUT_LOOP) { + autoneg = 0; + miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); + i++; + + if ((autoneg & AUTONEGLINK) == AUTONEGLINK) + break; + + udelay(500); + } + if (i >= MCFFEC_TOUT_LOOP) { + printf("Auto Negotiation not complete\n"); + } + + /* adapt to the half/full speed settings */ + info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; + info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); +} + +/***************************************************************************** + * Read and write a MII PHY register, routines used by MII Utilities + * + * FIXME: These routines are expected to return 0 on success, but mii_send + * does _not_ return an error code. Maybe 0xFFFF means error, i.e. + * no PHY connected... + * For now always return 0. + * FIXME: These routines only work after calling eth_init() at least once! + * Otherwise they hang in mii_send() !!! Sorry! + *****************************************************************************/ + +int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, + unsigned short *value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); +#endif + rdreg = mii_send(mk_mii_read(addr, reg)); + + *value = rdreg; + +#ifdef MII_DEBUG + printf("0x%04x\n", *value); +#endif + + return 0; +} + +int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, + unsigned short value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); +#endif + + rdreg = mii_send(mk_mii_write(addr, reg, value)); + +#ifdef MII_DEBUG + printf("0x%04x\n", value); +#endif + + return 0; +} + +#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/include/configs/M5271EVB.h b/include/configs/M5271EVB.h index 885a8821bf9..0f97050f213 100644 --- a/include/configs/M5271EVB.h +++ b/include/configs/M5271EVB.h @@ -31,7 +31,6 @@ #ifndef _M5271EVB_H #define _M5271EVB_H -#define DEBUG #undef DEBUG /* @@ -41,17 +40,15 @@ #define CONFIG_M5271 /* define processor type */ #define CONFIG_M5271EVB /* define board type */ -#define CONFIG_IPADDR 192.168.30.1 -#define CONFIG_SERVERIP 192.168.1.1 -#define CONFIG_ETHADDR 00:06:3b:01:41:55 +#define CONFIG_MCFTMR +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) #define CONFIG_BAUDRATE 19200 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #undef CONFIG_WATCHDOG /* disable watchdog */ -#define CONFIG_BOOTDELAY 5 - /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash */ @@ -73,7 +70,6 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ @@ -81,22 +77,83 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_NET +#define CONFIG_CMD_MII +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC #undef CONFIG_CMD_LOADS #undef CONFIG_CMD_LOADB +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_MULTI 1 +# define CONFIG_MII 1 +# define CFG_DISCOVER_PHY +# define CFG_RX_ETH_BUFFER 8 +# define CFG_FAULT_ECHO_LINK_DOWN + +# define CFG_FEC0_PINMUX 0 +# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 +/* If CFG_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CFG_DISCOVER_PHY +# define FECDUPLEX FULL +# define FECSPEED _100BASET +# else +# ifndef CFG_FAULT_ECHO_LINK_DOWN +# define CFG_FAULT_ECHO_LINK_DOWN +# endif +# endif /* CFG_DISCOVER_PHY */ +#endif + +/* I2C */ +#define CONFIG_FSL_I2C +#define CONFIG_HARD_I2C /* I2C with hw support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 80000 +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_OFFSET 0x00000300 +#define CFG_IMMR CFG_MBAR + +#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ +#define CONFIG_BOOTFILE "u-boot.bin" +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_RETRY_COUNT 5 +# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 +# define CONFIG_IPADDR 192.162.1.2 +# define CONFIG_NETMASK 255.255.255.0 +# define CONFIG_SERVERIP 192.162.1.1 +# define CONFIG_GATEWAYIP 192.162.1.1 +# define CONFIG_OVERWRITE_ETHADDR_ONCE +#endif /* FEC_ENET */ + +#define CONFIG_HOSTNAME M5235EVB +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "loadaddr=10000\0" \ + "u-boot=u-boot.bin\0" \ + "load=tftp ${loadaddr) ${u-boot}\0" \ + "upd=run load; run prog\0" \ + "prog=prot off ffe00000 ffe2ffff;" \ + "era ffe00000 ffe2ffff;" \ + "cp.b ${loadaddr} 0 ${filesize};" \ + "save\0" \ + "" #define CFG_PROMPT "=> " -#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LONGHELP /* undef to save memory */ #if defined(CONFIG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_LOAD_ADDR 0x00100000 @@ -114,16 +171,11 @@ #define CFG_MBAR 0x40000000 /* Register Base Addrs */ -/* Enable FEC ethernet */ -#define FEC_ENET -#define CONFIG_NET_RETRY_COUNT 5 -#define CFG_ENET_BD_BASE 0x480000 - /* * Definitions for initial stack pointer and data area (in DPRAM) */ #define CFG_INIT_RAM_ADDR 0x20000000 -#define CFG_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ +#define CFG_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ #define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET @@ -134,7 +186,7 @@ * Please note that CFG_SDRAM_BASE _must_ start at 0 */ #define CFG_SDRAM_BASE 0x00000000 -#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ +#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ #define CFG_FLASH_BASE 0xffe00000 #ifdef CONFIG_MONITOR_IS_IN_RAM @@ -152,11 +204,11 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) /* FLASH organization */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 11 /* max number of sectors on one chip */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 11 /* max number of sectors on one chip */ #define CFG_FLASH_ERASE_TOUT 1000 #define CFG_FLASH_CFI 1 @@ -169,4 +221,4 @@ /* Port configuration */ #define CFG_FECI2C 0xF0 -#endif /* _M5271EVB_H */ +#endif /* _M5271EVB_H */ diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index cc456dc08a9..2b8734b4c6d 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -33,18 +33,20 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCF52x2 /* define processor family */ -#define CONFIG_M5272 /* define processor type */ +#define CONFIG_MCF52x2 /* define processor family */ +#define CONFIG_M5272 /* define processor type */ -#define FEC_ENET +#define CONFIG_MCFTMR +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) #define CONFIG_BAUDRATE 19200 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } -#define CONFIG_WATCHDOG +#undef CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 10000 /* timeout in milliseconds */ -#define CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */ +#undef CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */ /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash @@ -60,7 +62,6 @@ #define CFG_ENV_IS_IN_FLASH 1 #endif - /* * BOOTP options */ @@ -69,37 +70,82 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ #include #define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_MISC +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_MEMORY #undef CONFIG_CMD_LOADS #undef CONFIG_CMD_LOADB - #define CONFIG_BOOTDELAY 5 +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_MULTI 1 +# define CONFIG_MII 1 +# define CFG_DISCOVER_PHY +# define CFG_RX_ETH_BUFFER 8 +# define CFG_FAULT_ECHO_LINK_DOWN + +# define CFG_FEC0_PINMUX 0 +# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 +/* If CFG_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CFG_DISCOVER_PHY +# define FECDUPLEX FULL +# define FECSPEED _100BASET +# else +# ifndef CFG_FAULT_ECHO_LINK_DOWN +# define CFG_FAULT_ECHO_LINK_DOWN +# endif +# endif /* CFG_DISCOVER_PHY */ +#endif + +#ifdef CONFIG_MCFFEC +# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 +# define CONFIG_IPADDR 192.162.1.2 +# define CONFIG_NETMASK 255.255.255.0 +# define CONFIG_SERVERIP 192.162.1.1 +# define CONFIG_GATEWAYIP 192.162.1.1 +# define CONFIG_OVERWRITE_ETHADDR_ONCE +#endif /* CONFIG_MCFFEC */ + +#define CONFIG_HOSTNAME M5272C3 +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "loadaddr=10000\0" \ + "u-boot=u-boot.bin\0" \ + "load=tftp ${loadaddr) ${u-boot}\0" \ + "upd=run load; run prog\0" \ + "prog=prot off ffe00000 ffe3ffff;" \ + "era ffe00000 ffe3ffff;" \ + "cp.b ${loadaddr} ffe00000 ${filesize};"\ + "save\0" \ + "" #define CFG_PROMPT "-> " -#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LONGHELP /* undef to save memory */ #if defined(CONFIG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_LOAD_ADDR 0x20000 - #define CFG_MEMTEST_START 0x400 #define CFG_MEMTEST_END 0x380000 - #define CFG_HZ 1000 #define CFG_CLK 66000000 @@ -108,20 +154,15 @@ * (address mappings, register initial values, etc.) * You should know what you are doing if you make changes here. */ - #define CFG_MBAR 0x10000000 /* Register Base Addrs */ - #define CFG_SCR 0x0003; #define CFG_SPR 0xffff; -#define CFG_DISCOVER_PHY -#define CFG_ENET_BD_BASE 0x380000 - /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ #define CFG_INIT_RAM_ADDR 0x20000000 -#define CFG_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ +#define CFG_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ #define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET @@ -132,7 +173,7 @@ * Please note that CFG_SDRAM_BASE _must_ start at 0 */ #define CFG_SDRAM_BASE 0x00000000 -#define CFG_SDRAM_SIZE 4 /* SDRAM size in MB */ +#define CFG_SDRAM_SIZE 4 /* SDRAM size in MB */ #define CFG_FLASH_BASE 0xffe00000 #ifdef CONFIG_MONITOR_IS_IN_RAM @@ -150,13 +191,13 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 11 /* max number of sectors on one chip */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 11 /* max number of sectors on one chip */ #define CFG_FLASH_ERASE_TOUT 1000 /*----------------------------------------------------------------------- @@ -169,25 +210,18 @@ */ #define CFG_BR0_PRELIM 0xFFE00201 #define CFG_OR0_PRELIM 0xFFE00014 - #define CFG_BR1_PRELIM 0 #define CFG_OR1_PRELIM 0 - #define CFG_BR2_PRELIM 0x30000001 #define CFG_OR2_PRELIM 0xFFF80000 - #define CFG_BR3_PRELIM 0 #define CFG_OR3_PRELIM 0 - #define CFG_BR4_PRELIM 0 #define CFG_OR4_PRELIM 0 - #define CFG_BR5_PRELIM 0 #define CFG_OR5_PRELIM 0 - #define CFG_BR6_PRELIM 0 #define CFG_OR6_PRELIM 0 - #define CFG_BR7_PRELIM 0x00000701 #define CFG_OR7_PRELIM 0xFFC0007C @@ -197,9 +231,8 @@ #define CFG_PACNT 0x00000000 #define CFG_PADDR 0x0000 #define CFG_PADAT 0x0000 -#define CFG_PBCNT 0x55554155 /* Ethernet/UART configuration */ +#define CFG_PBCNT 0x55554155 /* Ethernet/UART configuration */ #define CFG_PBDDR 0x0000 #define CFG_PBDAT 0x0000 #define CFG_PDCNT 0x00000000 - -#endif /* _M5272C3_H */ +#endif /* _M5272C3_H */ diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index f2a7644930f..3c17c1ea146 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -33,15 +33,17 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCF52x2 /* define processor family */ -#define CONFIG_M5282 /* define processor type */ +#define CONFIG_MCF52x2 /* define processor family */ +#define CONFIG_M5282 /* define processor type */ -#define FEC_ENET +#define CONFIG_MCFTMR +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) #define CONFIG_BAUDRATE 19200 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } -#define CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */ +#undef CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */ /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash @@ -50,7 +52,6 @@ #define CFG_ENV_SIZE 0x2000 #define CFG_ENV_IS_IN_FLASH 1 - /* * BOOTP options */ @@ -59,29 +60,73 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ #include +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_MII #undef CONFIG_CMD_LOADS #undef CONFIG_CMD_LOADB +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_MULTI 1 +# define CONFIG_MII 1 +# define CFG_DISCOVER_PHY +# define CFG_RX_ETH_BUFFER 8 +# define CFG_FAULT_ECHO_LINK_DOWN + +# define CFG_FEC0_PINMUX 0 +# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 +/* If CFG_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CFG_DISCOVER_PHY +# define FECDUPLEX FULL +# define FECSPEED _100BASET +# else +# ifndef CFG_FAULT_ECHO_LINK_DOWN +# define CFG_FAULT_ECHO_LINK_DOWN +# endif +# endif /* CFG_DISCOVER_PHY */ +#endif #define CONFIG_BOOTDELAY 5 +#ifdef CONFIG_MCFFEC +# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 +# define CONFIG_IPADDR 192.162.1.2 +# define CONFIG_NETMASK 255.255.255.0 +# define CONFIG_SERVERIP 192.162.1.1 +# define CONFIG_GATEWAYIP 192.162.1.1 +# define CONFIG_OVERWRITE_ETHADDR_ONCE +#endif /* CONFIG_MCFFEC */ + +#define CONFIG_HOSTNAME M5272C3 +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "loadaddr=10000\0" \ + "u-boot=u-boot.bin\0" \ + "load=tftp ${loadaddr) ${u-boot}\0" \ + "upd=run load; run prog\0" \ + "prog=prot off ffe00000 ffe3ffff;" \ + "era ffe00000 ffe3ffff;" \ + "cp.b ${loadaddr} ffe00000 ${filesize};"\ + "save\0" \ + "" #define CFG_PROMPT "-> " -#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LONGHELP /* undef to save memory */ #if defined(CONFIG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_LOAD_ADDR 0x20000 @@ -91,6 +136,10 @@ #define CFG_HZ 1000000 #define CFG_CLK 64000000 +/* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */ + +#define CFG_MFD 0x02 /* PLL Multiplication Factor Devider */ +#define CFG_RFD 0x00 /* PLL Reduce Frecuency Devider */ /* * Low Level Configuration Settings @@ -99,15 +148,12 @@ */ #define CFG_MBAR 0x40000000 -#undef CFG_DISCOVER_PHY -#define CFG_ENET_BD_BASE 0x380000 - /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ -#define CFG_INIT_RAM_ADDR 0x20000000 -#define CFG_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */ -#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CFG_INIT_RAM_ADDR 0x20000000 +#define CFG_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */ +#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET @@ -117,49 +163,88 @@ * Please note that CFG_SDRAM_BASE _must_ start at 0 */ #define CFG_SDRAM_BASE 0x00000000 -#define CFG_SDRAM_SIZE 4 /* SDRAM size in MB */ +#define CFG_SDRAM_SIZE 8 /* SDRAM size in MB */ #define CFG_FLASH_BASE 0xffe00000 #define CFG_INT_FLASH_BASE 0xf0000000 +#define CFG_INT_FLASH_ENABLE 0x21 /* If M5282 port is fully implemented the monitor base will be behind * the vector table. */ -/* #define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) */ -#define CFG_MONITOR_BASE 0x20000 +#if (TEXT_BASE != CFG_INT_FLASH_BASE) +#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) +#else +#define CFG_MONITOR_BASE (TEXT_BASE + 0x418) /* 24 Byte for CFM-Config */ +#endif #define CFG_MONITOR_LEN 0x20000 #define CFG_MALLOC_LEN (256 << 10) #define CFG_BOOTPARAMS_LEN 64*1024 - /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - +#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_SECT 35 -#define CFG_MAX_FLASH_BANKS 1 -#define CFG_FLASH_ERASE_TOUT 10000000 +#define CFG_FLASH_CFI +#ifdef CFG_FLASH_CFI + +# define CFG_FLASH_CFI_DRIVER 1 +# define CFG_FLASH_SIZE 0x1000000 /* Max size that the board might have */ +# define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT +# define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +# define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ +# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ +# define CFG_FLASH_CHECKSUM +# define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#endif /*----------------------------------------------------------------------- * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 - /*----------------------------------------------------------------------- * Memory bank definitions */ - - +#define CFG_CS0_BASE CFG_FLASH_BASE +#define CFG_CS0_SIZE 2*1024*1024 +#define CFG_CS0_WIDTH 16 +#define CFG_CS0_RO 0 +#define CFG_CS0_WS 6 +/* +#define CFG_CS3_BASE 0xE0000000 +#define CFG_CS3_SIZE 1*1024*1024 +#define CFG_CS3_WIDTH 16 +#define CFG_CS3_RO 0 +#define CFG_CS3_WS 6 +*/ /*----------------------------------------------------------------------- * Port configuration */ +#define CFG_PACNT 0x0000000 /* Port A D[31:24] */ +#define CFG_PADDR 0x0000000 +#define CFG_PADAT 0x0000000 + +#define CFG_PBCNT 0x0000000 /* Port B D[23:16] */ +#define CFG_PBDDR 0x0000000 +#define CFG_PBDAT 0x0000000 + +#define CFG_PCCNT 0x0000000 /* Port C D[15:08] */ +#define CFG_PCDDR 0x0000000 +#define CFG_PCDAT 0x0000000 + +#define CFG_PDCNT 0x0000000 /* Port D D[07:00] */ +#define CFG_PCDDR 0x0000000 +#define CFG_PCDAT 0x0000000 +#define CFG_PEHLPAR 0xC0 +#define CFG_PUAPAR 0x0F /* UA0..UA3 = Uart 0 +1 */ +#define CFG_DDRUA 0x05 +#define CFG_PJPAR 0xFF; -#endif /* _CONFIG_M5282EVB_H */ +#endif /* _CONFIG_M5282EVB_H */ -- cgit v1.3.1 From a605aacd8324094199402816cc6d9124aba57b8d Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 16 Aug 2007 05:04:31 -0500 Subject: ColdFire: Add M5249EVB platform for MCF52x2 Signed-off-by: TsiChungLiew --- Makefile | 3 + board/freescale/m5249evb/Makefile | 44 ++++++++ board/freescale/m5249evb/config.mk | 25 +++++ board/freescale/m5249evb/m5249evb.c | 114 +++++++++++++++++++++ board/freescale/m5249evb/u-boot.lds | 146 +++++++++++++++++++++++++++ include/configs/M5249EVB.h | 195 ++++++++++++++++++++++++++++++++++++ 6 files changed, 527 insertions(+) create mode 100644 board/freescale/m5249evb/Makefile create mode 100644 board/freescale/m5249evb/config.mk create mode 100644 board/freescale/m5249evb/m5249evb.c create mode 100644 board/freescale/m5249evb/u-boot.lds create mode 100644 include/configs/M5249EVB.h (limited to 'include/configs') diff --git a/Makefile b/Makefile index 79ab40b1a05..af49438b439 100644 --- a/Makefile +++ b/Makefile @@ -1639,6 +1639,9 @@ ZPC1900_config: unconfig ## Coldfire ######################################################################### +M5249EVB_config : unconfig + @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale + cobra5272_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272 diff --git a/board/freescale/m5249evb/Makefile b/board/freescale/m5249evb/Makefile new file mode 100644 index 00000000000..424ab1cf9e3 --- /dev/null +++ b/board/freescale/m5249evb/Makefile @@ -0,0 +1,44 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/m5249evb/config.mk b/board/freescale/m5249evb/config.mk new file mode 100644 index 00000000000..ccb2cf735df --- /dev/null +++ b/board/freescale/m5249evb/config.mk @@ -0,0 +1,25 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Coldfire contribution by Bernhard Kuhn +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0xffe00000 diff --git a/board/freescale/m5249evb/m5249evb.c b/board/freescale/m5249evb/m5249evb.c new file mode 100644 index 00000000000..b0bf4139429 --- /dev/null +++ b/board/freescale/m5249evb/m5249evb.c @@ -0,0 +1,114 @@ +/* + * (C) Copyright 2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include + + +/* Prototypes */ +int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); + +int checkboard (void) { + ulong val; + uchar val8; + + puts ("Board: "); + puts("Freescale M5249EVB"); + val8 = ((uchar)~((uchar)mbar2_readLong(MCFSIM_GPIO1_READ) >> 4)) & 0xf; + printf(" (Switch=%1X)\n", val8); + + /* + * Set LED on + */ + val = mbar2_readLong(MCFSIM_GPIO1_OUT) & ~CFG_GPIO1_LED; + mbar2_writeLong(MCFSIM_GPIO1_OUT, val); /* Set LED on */ + + return 0; +}; + + +long int initdram (int board_type) { + unsigned long junk = 0xa5a59696; + + /* + * Note: + * RC = ([(RefreshTime/#rows) / (1/BusClk)] / 16) - 1 + */ + +#ifdef CFG_FAST_CLK + /* + * Busclk=70MHz, RefreshTime=64ms, #rows=4096 (4K) + * SO=1, NAM=0, COC=0, RTIM=01 (6clk refresh), RC=39 + */ + mbar_writeShort(MCFSIM_DCR, 0x8239); +#elif CFG_PLL_BYPASS + /* + * Busclk=5.6448MHz, RefreshTime=64ms, #rows=8192 (8K) + * SO=1, NAM=0, COC=0, RTIM=01 (6clk refresh), RC=02 + */ + mbar_writeShort(MCFSIM_DCR, 0x8202); +#else + /* + * Busclk=36MHz, RefreshTime=64ms, #rows=4096 (4K) + * SO=1, NAM=0, COC=0, RTIM=01 (6clk refresh), RC=22 (562 bus clock cycles) + */ + mbar_writeShort(MCFSIM_DCR, 0x8222); +#endif + + /* + * SDRAM starts at 0x0000_0000, CASL=10, CBM=010, PS=10 (16bit port), + * PM=1 (continuous page mode) + */ + + /* RE=0 (keep auto-refresh disabled while setting up registers) */ + mbar_writeLong(MCFSIM_DACR0, 0x00003324); + + /* BAM=007c (bits 22,21 are bank selects; 256kB blocks) */ + mbar_writeLong(MCFSIM_DMR0, 0x01fc0001); + + /** Precharge sequence **/ + mbar_writeLong(MCFSIM_DACR0, 0x0000332c); /* Set DACR0[IP] (bit 3) */ + *((volatile unsigned long *) 0x00) = junk; /* write to a memory location to init. precharge */ + udelay(0x10); /* Allow several Precharge cycles */ + + /** Refresh Sequence **/ + mbar_writeLong(MCFSIM_DACR0, 0x0000b324); /* Enable the refresh bit, DACR0[RE] (bit 15) */ + udelay(0x7d0); /* Allow gobs of refresh cycles */ + + /** Mode Register initialization **/ + mbar_writeLong(MCFSIM_DACR0, 0x0000b364); /* Enable DACR0[IMRS] (bit 6); RE remains enabled */ + *((volatile unsigned long *) 0x800) = junk; /* Access RAM to initialize the mode register */ + + return CFG_SDRAM_SIZE * 1024 * 1024; +}; + + +int testdram (void) { + /* TODO: XXX XXX XXX */ + printf ("DRAM test not implemented!\n"); + + return (0); +} + diff --git a/board/freescale/m5249evb/u-boot.lds b/board/freescale/m5249evb/u-boot.lds new file mode 100644 index 00000000000..a803b1cbadc --- /dev/null +++ b/board/freescale/m5249evb/u-boot.lds @@ -0,0 +1,146 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mcf52x2/start.o (.text) + lib_m68k/traps.o (.text) + cpu/mcf52x2/interrupts.o (.text) + common/dlmalloc.o (.text) + lib_generic/zlib.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + __got_start = .; + *(.got) + __got_end = .; + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + _sbss = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + _end = . ; + PROVIDE (end = .); +} diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h new file mode 100644 index 00000000000..b300b68bcfa --- /dev/null +++ b/include/configs/M5249EVB.h @@ -0,0 +1,195 @@ +/* + * Configuation settings for the esd TASREG board. + * + * (C) Copyright 2004 + * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef _M5249EVB_H +#define _M5249EVB_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_MCF52x2 /* define processor family */ +#define CONFIG_M5249 /* define processor type */ + +#define CONFIG_MCFTMR + +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) +#define CONFIG_BAUDRATE 19200 +#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } + +#undef CONFIG_WATCHDOG + +#undef CONFIG_MONITOR_IS_IN_RAM /* no pre-loader required!!! ;-) */ + +/* + * BOOTP options + */ +#undef CONFIG_BOOTP_BOOTFILESIZE +#undef CONFIG_BOOTP_BOOTPATH +#undef CONFIG_BOOTP_GATEWAY +#undef CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include +#undef CONFIG_CMD_NET + +#define CFG_PROMPT "=> " +#define CFG_LONGHELP /* undef to save memory */ + +#if defined(CONFIG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_DEVICE_NULLDEV 1 /* include nulldev device */ +#define CFG_CONSOLE_INFO_QUIET 1 /* don't print console @ startup */ +#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ + +#define CFG_LOAD_ADDR 0x200000 /* default load address */ + +#define CFG_MEMTEST_START 0x400 +#define CFG_MEMTEST_END 0x380000 + +#define CFG_HZ 1000 + +/* + * Clock configuration: enable only one of the following options + */ + +#undef CFG_PLL_BYPASS /* bypass PLL for test purpose */ +#define CFG_FAST_CLK 1 /* MCF5249 can run at 140MHz */ +#define CFG_CLK 132025600 /* MCF5249 can run at 140MHz */ + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ + +#define CFG_MBAR 0x10000000 /* Register Base Addrs */ +#define CFG_MBAR2 0x80000000 + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR 0x20000000 +#define CFG_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ +#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_OFFSET 0x4000 /* Address of Environment Sector*/ +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ +#define CFG_ENV_SECT_SIZE 0x2000 /* see README - env sector total size */ + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ +#define CFG_FLASH_BASE (CFG_CSAR0 << 16) + +#if 0 /* test-only */ +#define CONFIG_PRAM 512 /* test-only for SDRAM problem!!!!!!!!!!!!!!!!!!!! */ +#endif + +#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) + +#define CFG_MONITOR_LEN 0x20000 +#define CFG_MALLOC_LEN (1 * 1024*1024) /* Reserve 1 MB for malloc() */ +#define CFG_BOOTPARAMS_LEN 64*1024 + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization ?? + */ +#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_FLASH_CFI +#ifdef CFG_FLASH_CFI + +# define CFG_FLASH_CFI_DRIVER 1 +# define CFG_FLASH_SIZE 0x1000000 /* Max size that the board might have */ +# define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT +# define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +# define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ +# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ +# define CFG_FLASH_CHECKSUM +# define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#endif + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 + +/*----------------------------------------------------------------------- + * Memory bank definitions + */ + +/* CS0 - AMD Flash, address 0xffc00000 */ +#define CFG_CSAR0 0xffe0 +#define CFG_CSCR0 0x1980 /* WS=0110, AA=1, PS=10 */ +/** Note: There is a CSMR0/DRAM vector problem, need to disable C/I ***/ +#define CFG_CSMR0 0x003f0021 /* 4MB, AA=0, WP=0, C/I=1, V=1 */ + +/* CS1 - FPGA, address 0xe0000000 */ +#define CFG_CSAR1 0xe000 +#define CFG_CSCR1 0x0d80 /* WS=0011, AA=1, PS=10 */ +#define CFG_CSMR1 0x00010001 /* 128kB, AA=0, WP=0, C/I=0, V=1*/ + +/*----------------------------------------------------------------------- + * Port configuration + */ +#define CFG_GPIO_FUNC 0x00000008 /* Set gpio pins: none */ +#define CFG_GPIO1_FUNC 0x00df00f0 /* 36-39(SWITCH),48-52(FPGAs),54*/ +#define CFG_GPIO_EN 0x00000008 /* Set gpio output enable */ +#define CFG_GPIO1_EN 0x00c70000 /* Set gpio output enable */ +#define CFG_GPIO_OUT 0x00000008 /* Set outputs to default state */ +#define CFG_GPIO1_OUT 0x00c70000 /* Set outputs to default state */ +#define CFG_GPIO1_LED 0x00400000 /* user led */ + +#endif /* M5249 */ + -- cgit v1.3.1 From a1436a842654a8d3927d082a8ae9ee0a10da62d7 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 16 Aug 2007 13:20:50 -0500 Subject: ColdFire: Add M5253EVBE platform for MCF52x2 Signed-off-by: TsiChungLiew --- CREDITS | 5 + MAKEALL | 2 + Makefile | 3 + board/freescale/m5253evbe/Makefile | 44 +++++++ board/freescale/m5253evbe/config.mk | 25 ++++ board/freescale/m5253evbe/m5253evbe.c | 133 +++++++++++++++++++++ board/freescale/m5253evbe/u-boot.lds | 144 +++++++++++++++++++++++ cpu/mcf52x2/cpu.c | 32 ++++- cpu/mcf52x2/cpu_init.c | 92 +++++++++++---- cpu/mcf52x2/interrupts.c | 13 +-- cpu/mcf52x2/speed.c | 35 +++++- cpu/mcf52x2/start.S | 6 +- doc/README.m5253evbe | 103 ++++++++++++++++ include/asm-m68k/immap.h | 25 +++- include/asm-m68k/immap_5253.h | 95 +++++++++++++++ include/asm-m68k/m5253.h | 73 ++++++++++++ include/configs/M5253EVBE.h | 213 ++++++++++++++++++++++++++++++++++ lib_m68k/interrupts.c | 2 - 18 files changed, 1010 insertions(+), 35 deletions(-) create mode 100644 board/freescale/m5253evbe/Makefile create mode 100644 board/freescale/m5253evbe/config.mk create mode 100644 board/freescale/m5253evbe/m5253evbe.c create mode 100644 board/freescale/m5253evbe/u-boot.lds create mode 100644 doc/README.m5253evbe create mode 100644 include/asm-m68k/immap_5253.h create mode 100644 include/asm-m68k/m5253.h create mode 100644 include/configs/M5253EVBE.h mode change 100644 => 100755 lib_m68k/interrupts.c (limited to 'include/configs') diff --git a/CREDITS b/CREDITS index b31125b6892..b1abad32a21 100644 --- a/CREDITS +++ b/CREDITS @@ -494,3 +494,8 @@ E: Tsi-Chung.Liew@freescale.com D: Support for ColdFire MCF532x W: www.freescale.com +N: Hayden Fraser +E: Hayden.Fraser@freescale.com +D: Support for ColdFire MCF5253 +W: www.freescale.com + diff --git a/MAKEALL b/MAKEALL index 4467d7570b5..890ee39a78f 100755 --- a/MAKEALL +++ b/MAKEALL @@ -618,6 +618,8 @@ LIST_coldfire=" \ EB+MCF-EV123 \ EB+MCF-EV123_internal \ idmr \ + M5249EVB \ + M5253EVB \ M5271EVB \ M5272C3 \ M5282EVB \ diff --git a/Makefile b/Makefile index af49438b439..e5995ebfc40 100644 --- a/Makefile +++ b/Makefile @@ -1642,6 +1642,9 @@ ZPC1900_config: unconfig M5249EVB_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale +M5253EVBE_config : unconfig + @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253evbe freescale + cobra5272_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272 diff --git a/board/freescale/m5253evbe/Makefile b/board/freescale/m5253evbe/Makefile new file mode 100644 index 00000000000..424ab1cf9e3 --- /dev/null +++ b/board/freescale/m5253evbe/Makefile @@ -0,0 +1,44 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/m5253evbe/config.mk b/board/freescale/m5253evbe/config.mk new file mode 100644 index 00000000000..ccb2cf735df --- /dev/null +++ b/board/freescale/m5253evbe/config.mk @@ -0,0 +1,25 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Coldfire contribution by Bernhard Kuhn +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0xffe00000 diff --git a/board/freescale/m5253evbe/m5253evbe.c b/board/freescale/m5253evbe/m5253evbe.c new file mode 100644 index 00000000000..67fab5b0209 --- /dev/null +++ b/board/freescale/m5253evbe/m5253evbe.c @@ -0,0 +1,133 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * Hayden Fraser (Hayden.Fraser@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +int checkboard(void) +{ + puts("Board: "); + puts("Freescale MCF5253 EVBE\n"); + return 0; +}; + +long int initdram(int board_type) +{ + int i; + + /* + * Check to see if the SDRAM has already been initialized + * by a run control tool + */ + if (!(mbar_readLong(MCFSIM_DCR) & 0x8000)) { + u32 RC, dramsize; + + RC = (CFG_CLK / 1000000) >> 1; + RC = (RC * 15) >> 4; + + /* Initialize DRAM Control Register: DCR */ + mbar_writeShort(MCFSIM_DCR, (0x8400 | RC)); + + mbar_writeLong(MCFSIM_DACR0, 0x00003224); + + /* Initialize DMR0 */ + dramsize = ((CFG_SDRAM_SIZE << 20) - 1) & 0xFFFC0000; + mbar_writeLong(MCFSIM_DMR0, dramsize | 1); + + mbar_writeLong(MCFSIM_DACR0, 0x0000322c); + + /* Write to this block to initiate precharge */ + *(u32 *) (CFG_SDRAM_BASE) = 0xa5a5a5a5; + + /* Set RE bit in DACR */ + mbar_writeLong(MCFSIM_DACR0, + mbar_readLong(MCFSIM_DACR0) | 0x8000); + + /* Wait for at least 8 auto refresh cycles to occur */ + udelay(500); + + /* Finish the configuration by issuing the MRS */ + mbar_writeLong(MCFSIM_DACR0, + mbar_readLong(MCFSIM_DACR0) | 0x0040); + + *(u32 *) (CFG_SDRAM_BASE + 0x800) = 0xa5a5a5a5; + } + + return CFG_SDRAM_SIZE * 1024 * 1024; +} + +int testdram(void) +{ + /* TODO: XXX XXX XXX */ + printf("DRAM test not implemented!\n"); + + return (0); +} + +#ifdef CONFIG_CMD_IDE +#include +int ide_preinit(void) +{ + return (0); +} + +void ide_set_reset(int idereset) +{ + volatile atac_t *ata = (atac_t *) CFG_ATA_BASE_ADDR; + long period; + /* t1, t2, t3, t4, t5, t6, t9, tRD, tA */ + int piotms[5][9] = { {70, 165, 60, 30, 50, 5, 20, 0, 35}, /* PIO 0 */ + {50, 125, 45, 20, 35, 5, 15, 0, 35}, /* PIO 1 */ + {30, 100, 30, 15, 20, 5, 10, 0, 35}, /* PIO 2 */ + {30, 80, 30, 10, 20, 5, 10, 0, 35}, /* PIO 3 */ + {25, 70, 20, 10, 20, 5, 10, 0, 35} /* PIO 4 */ + }; + + if (idereset) { + ata->cr = 0; /* control reset */ + udelay(100); + } else { + mbar2_writeLong(CIM_MISCCR, CIM_MISCCR_CPUEND); + +#define CALC_TIMING(t) (t + period - 1) / period + period = 1000000000 / (CFG_CLK / 2); /* period in ns */ + + /*ata->ton = CALC_TIMING (180); */ + ata->t1 = CALC_TIMING(piotms[2][0]); + ata->t2w = CALC_TIMING(piotms[2][1]); + ata->t2r = CALC_TIMING(piotms[2][1]); + ata->ta = CALC_TIMING(piotms[2][8]); + ata->trd = CALC_TIMING(piotms[2][7]); + ata->t4 = CALC_TIMING(piotms[2][3]); + ata->t9 = CALC_TIMING(piotms[2][6]); + + ata->cr = 0x40; /* IORDY enable */ + udelay(2000); + ata->cr |= 0x01; /* IORDY enable */ + } +} +#endif /* CONFIG_CMD_IDE */ + diff --git a/board/freescale/m5253evbe/u-boot.lds b/board/freescale/m5253evbe/u-boot.lds new file mode 100644 index 00000000000..e2fd0708d58 --- /dev/null +++ b/board/freescale/m5253evbe/u-boot.lds @@ -0,0 +1,144 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mcf52x2/start.o (.text) + lib_m68k/traps.o (.text) + cpu/mcf52x2/interrupts.o (.text) + common/dlmalloc.o (.text) + lib_generic/zlib.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + __got_start = .; + *(.got) + __got_end = .; + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + _sbss = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + _end = . ; + PROVIDE (end = .); +} diff --git a/cpu/mcf52x2/cpu.c b/cpu/mcf52x2/cpu.c index 96fe3711bb5..71ea408aa5e 100644 --- a/cpu/mcf52x2/cpu.c +++ b/cpu/mcf52x2/cpu.c @@ -205,7 +205,7 @@ int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[]) }; #endif -#ifdef CONFIG_M5249 /* test-only: todo... */ +#ifdef CONFIG_M5249 int checkcpu(void) { char buf[32]; @@ -225,3 +225,33 @@ int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[]) return 0; }; #endif + +#ifdef CONFIG_M5253 +int checkcpu(void) +{ + char buf[32]; + + unsigned char resetsource = mbar_readLong(SIM_RSR); + printf("CPU: Freescale Coldfire MCF5253 at %s MHz\n", + strmhz(buf, CFG_CLK)); + + if ((resetsource & SIM_RSR_HRST) || (resetsource & SIM_RSR_SWTR)) { + printf("Reset:%s%s\n", + (resetsource & SIM_RSR_HRST) ? " Hardware/ System Reset" + : "", + (resetsource & SIM_RSR_SWTR) ? " Software Watchdog" : + ""); + } + return 0; +} + +int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[]) +{ + /* enable watchdog, set timeout to 0 and wait */ + mbar_writeByte(SIM_SYPCR, 0xc0); + while (1) ; + + /* we don't return! */ + return 0; +}; +#endif diff --git a/cpu/mcf52x2/cpu_init.c b/cpu/mcf52x2/cpu_init.c index 5736d0f26c1..f41d77bc599 100644 --- a/cpu/mcf52x2/cpu_init.c +++ b/cpu/mcf52x2/cpu_init.c @@ -6,6 +6,10 @@ * (C) Copyright 2005 * BuS Elektronik GmbH & Co. KG * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * Hayden Fraser (Hayden.Fraser@freescale.com) + * * See file CREDITS for list of people who contributed to this * project. * @@ -29,6 +33,74 @@ #include #include +#if defined(CONFIG_M5253) +/* + * Breath some life into the CPU... + * + * Set up the memory map, + * initialize a bunch of registers, + * initialize the UPM's + */ +void cpu_init_f(void) +{ + mbar_writeByte(MCFSIM_MPARK, 0x40); /* 5249 Internal Core takes priority over DMA */ + mbar_writeByte(MCFSIM_SYPCR, 0x00); + mbar_writeByte(MCFSIM_SWIVR, 0x0f); + mbar_writeByte(MCFSIM_SWSR, 0x00); + mbar_writeByte(MCFSIM_SWDICR, 0x00); + mbar_writeByte(MCFSIM_TIMER1ICR, 0x00); + mbar_writeByte(MCFSIM_TIMER2ICR, 0x88); + mbar_writeByte(MCFSIM_I2CICR, 0x00); + mbar_writeByte(MCFSIM_UART1ICR, 0x00); + mbar_writeByte(MCFSIM_UART2ICR, 0x00); + mbar_writeByte(MCFSIM_ICR6, 0x00); + mbar_writeByte(MCFSIM_ICR7, 0x00); + mbar_writeByte(MCFSIM_ICR8, 0x00); + mbar_writeByte(MCFSIM_ICR9, 0x00); + mbar_writeByte(MCFSIM_QSPIICR, 0x00); + + mbar2_writeLong(MCFSIM_GPIO_INT_EN, 0x00000080); + mbar2_writeByte(MCFSIM_INTBASE, 0x40); /* Base interrupts at 64 */ + mbar2_writeByte(MCFSIM_SPURVEC, 0x00); + + /*mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020); *//* Enable a 1 cycle pre-drive cycle on CS1 */ + + /* + * Setup chip selects... + */ + + mbar_writeShort(MCFSIM_CSAR1, CFG_CSAR1); + mbar_writeShort(MCFSIM_CSCR1, CFG_CSCR1); + mbar_writeLong(MCFSIM_CSMR1, CFG_CSMR1); + + mbar_writeShort(MCFSIM_CSAR0, CFG_CSAR0); + mbar_writeShort(MCFSIM_CSCR0, CFG_CSCR0); + mbar_writeLong(MCFSIM_CSMR0, CFG_CSMR0); + + /* enable instruction cache now */ + icache_enable(); +} + +/*initialize higher level parts of CPU like timers */ +int cpu_init_r(void) +{ + return (0); +} + +void uart_port_conf(void) +{ + /* Setup Ports: */ + switch (CFG_UART_PORT) { + case 0: + break; + case 1: + break; + case 2: + break; + } +} +#endif /* #if defined(CONFIG_M5253) */ + #if defined(CONFIG_M5271) void cpu_init_f(void) { @@ -394,26 +466,6 @@ void uart_port_conf(void) */ void cpu_init_f(void) { -#ifndef CFG_PLL_BYPASS - /* - * Setup the PLL to run at the specified speed - * - */ - volatile unsigned long cpll = mbar2_readLong(MCFSIM_PLLCR); - unsigned long pllcr; -#ifdef CFG_FAST_CLK - pllcr = 0x925a3100; /* ~140MHz clock (PLL bypass = 0) */ -#else - pllcr = 0x135a4140; /* ~72MHz clock (PLL bypass = 0) */ -#endif - cpll = cpll & 0xfffffffe; /* Set PLL bypass mode = 0 (PSTCLK = crystal) */ - mbar2_writeLong(MCFSIM_PLLCR, cpll); /* Set the PLL to bypass mode (PSTCLK = crystal) */ - mbar2_writeLong(MCFSIM_PLLCR, pllcr); /* set the clock speed */ - pllcr ^= 0x00000001; /* Set pll bypass to 1 */ - mbar2_writeLong(MCFSIM_PLLCR, pllcr); /* Start locking (pll bypass = 1) */ - udelay(0x20); /* Wait for a lock ... */ -#endif /* #ifndef CFG_PLL_BYPASS */ - /* * NOTE: by setting the GPIO_FUNCTION registers, we ensure that the UART pins * (UART0: gpio 30,27, UART1: gpio 31, 28) will be used as UART pins diff --git a/cpu/mcf52x2/interrupts.c b/cpu/mcf52x2/interrupts.c index d9a35bb8c97..2ccbde587e5 100644 --- a/cpu/mcf52x2/interrupts.c +++ b/cpu/mcf52x2/interrupts.c @@ -1,9 +1,10 @@ /* - * (C) Copyright 2003 Josef Baumgartner - * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * * See file CREDITS for list of people who contributed to this * project. * @@ -82,7 +83,7 @@ void dtimer_intr_setup(void) #endif /* CONFIG_MCFTMR */ #endif /* CONFIG_M5282 | CONFIG_M5271 */ -#ifdef CONFIG_M5249 +#if defined(CONFIG_M5249) || defined(CONFIG_M5253) int interrupt_init(void) { enable_interrupts(); @@ -94,9 +95,7 @@ int interrupt_init(void) void dtimer_intr_setup(void) { mbar_writeLong(MCFSIM_IMR, mbar_readLong(MCFSIM_IMR) & ~0x00000400); - mbar_writeByte(MCFSIM_TIMER2ICR, - MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | - MCFSIM_ICR_PRI3); + mbar_writeByte(MCFSIM_TIMER2ICR, CFG_TMRINTR_PRI); } #endif /* CONFIG_MCFTMR */ -#endif /* CONFIG_M5249 */ +#endif /* CONFIG_M5249 || CONFIG_M5253 */ diff --git a/cpu/mcf52x2/speed.c b/cpu/mcf52x2/speed.c index ac860b2c673..bc1e20023b1 100644 --- a/cpu/mcf52x2/speed.c +++ b/cpu/mcf52x2/speed.c @@ -2,6 +2,9 @@ * (C) Copyright 2003 * Josef Baumgartner * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * Hayden Fraser (Hayden.Fraser@freescale.com) + * * See file CREDITS for list of people who contributed to this * project. * @@ -23,6 +26,7 @@ #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -31,8 +35,37 @@ DECLARE_GLOBAL_DATA_PTR; */ int get_clocks (void) { - gd->cpu_clk = CFG_CLK; +#if defined(CONFIG_M5249) || defined(CONFIG_M5253) + volatile unsigned long cpll = mbar2_readLong(MCFSIM_PLLCR); + unsigned long pllcr; + +#ifndef CFG_PLL_BYPASS + #ifdef CONFIG_M5249 + /* Setup the PLL to run at the specified speed */ +#ifdef CFG_FAST_CLK + pllcr = 0x925a3100; /* ~140MHz clock (PLL bypass = 0) */ +#else + pllcr = 0x135a4140; /* ~72MHz clock (PLL bypass = 0) */ +#endif +#endif /* CONFIG_M5249 */ + +#ifdef CONFIG_M5253 + pllcr = CFG_PLLCR; +#endif /* CONFIG_M5253 */ + + cpll = cpll & 0xfffffffe; /* Set PLL bypass mode = 0 (PSTCLK = crystal) */ + mbar2_writeLong(MCFSIM_PLLCR, cpll); /* Set the PLL to bypass mode (PSTCLK = crystal) */ + mbar2_writeLong(MCFSIM_PLLCR, pllcr); /* set the clock speed */ + pllcr ^= 0x00000001; /* Set pll bypass to 1 */ + mbar2_writeLong(MCFSIM_PLLCR, pllcr); /* Start locking (pll bypass = 1) */ + udelay(0x20); /* Wait for a lock ... */ +#endif /* #ifndef CFG_PLL_BYPASS */ + +#endif /* CONFIG_M5249 || CONFIG_M5253 */ + + gd->cpu_clk = CFG_CLK; +#if defined(CONFIG_M5249) || defined(CONFIG_M5253) gd->bus_clk = gd->cpu_clk / 2; #else gd->bus_clk = gd->cpu_clk; diff --git a/cpu/mcf52x2/start.S b/cpu/mcf52x2/start.S index 6783d4d94c4..686e2a53330 100644 --- a/cpu/mcf52x2/start.S +++ b/cpu/mcf52x2/start.S @@ -121,7 +121,7 @@ _start: nop move.w #0x2700,%sr -#if defined(CONFIG_M5272) || defined(CONFIG_M5249) +#if defined(CONFIG_M5272) || defined(CONFIG_M5249) || defined(CONFIG_M5253) move.l #(CFG_MBAR + 1), %d0 /* set MBAR address + valid flag */ move.c %d0, %MBAR @@ -133,7 +133,7 @@ _start: move.l #(CFG_INIT_RAM_ADDR + 1), %d0 movec %d0, %RAMBAR0 -#endif /* #if defined(CONFIG_M5272) || defined(CONFIG_M5249) */ +#endif /* CONFIG_M5272 || CONFIG_M5249 || CONFIG_M5253 */ #if defined(CONFIG_M5282) || defined(CONFIG_M5271) /* Initialize IPSBAR */ @@ -407,7 +407,7 @@ icache_state_access_1: rts #endif -#ifdef CONFIG_M5249 +#if defined(CONFIG_M5249) || defined(CONFIG_M5253) .globl icache_enable icache_enable: /* diff --git a/doc/README.m5253evbe b/doc/README.m5253evbe new file mode 100644 index 00000000000..7f2afcf156b --- /dev/null +++ b/doc/README.m5253evbe @@ -0,0 +1,103 @@ +Freescale Amadeus Plus M5253EVBE board +====================================== + +Hayden Fraser(Hayden.Fraser@freescale.com) +Created 06/05/2007 +=========================================== + + +1. SWITCH SETTINGS +================== +1.1 N/A + + +2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL +=========================================== +2.1. For the initial bringup, we adopted a consistent memory scheme between u-boot and + linux kernel, you can customize it based on your system requirements: + SDR: 0x00000000-0x00ffffff + SRAM0: 0x20010000-0x20017fff + SRAM1: 0x20000000-0x2000ffff + MBAR1: 0x10000000-0x4fffffff + MBAR2: 0x80000000-0xCfffffff + Flash: 0xffe00000-0xffffffff + +3. DEFINITIONS AND COMPILATION +============================== +3.1 Explanation on NEW definitions in include/configs/M5253EVBE.h + CONFIG_MCF52x2 Processor family + CONFIG_MCF5253 MCF5253 specific + CONFIG_M5253EVBE Amadeus Plus board specific + CFG_CLK Define Amadeus Plus CPU Clock + CFG_MBAR MBAR base address + CFG_MBAR2 MBAR2 base address + +3.2 Compilation + export CROSS_COMPILE=/usr/local/freescale-coldfire-4.1-elf/bin/m68k-elf- + cd u-boot-1-2-x + make distclean + make M5253EVBE_config + make + + +4. SCREEN DUMP +============== +4.1 U-Boot 1.2.0 (Jun 18 2007 - 18:20:00) + +CPU: Freescale Coldfire MCF5253 at 62 MHz +Board: Freescale MCF5253 EVBE +DRAM: 16 MB +FLASH: 2 MB +In: serial +Out: serial +Err: serial +=> flinfo + +Bank # 1: CFI conformant FLASH (16 x 16) Size: 2 MB in 35 Sectors + AMD Standard command set, Manufacturer ID: 0x01, Device ID: 0x49 + Erase timeout: 16384 ms, write timeout: 1 ms + + Sector Start Addresses: + FFE00000 RO FFE04000 RO FFE06000 RO FFE08000 RO FFE10000 RO + FFE20000 FFE30000 FFE40000 FFE50000 FFE60000 + FFE70000 FFE80000 FFE90000 FFEA0000 FFEB0000 + FFEC0000 FFED0000 FFEE0000 FFEF0000 FFF00000 + FFF10000 FFF20000 FFF30000 FFF40000 FFF50000 + FFF60000 FFF70000 FFF80000 FFF90000 FFFA0000 + FFFB0000 FFFC0000 FFFD0000 FFFE0000 FFFF0000 + +=> bdinfo +boot_params = 0x00F62F90 +memstart = 0x00000000 +memsize = 0x01000000 +flashstart = 0xFFE00000 +flashsize = 0x00200000 +flashoffset = 0x00000000 +baudrate = 19200 bps + +=> printenv +bootdelay=5 +baudrate=19200 +stdin=serial +stdout=serial +stderr=serial + +Environment size: 134/8188 bytes +=> saveenv +Saving Environment to Flash... +Un-Protected 1 sectors +Erasing Flash... +. done +Erased 1 sectors +Writing to Flash... done +Protected 1 sectors +=> + +5. COMPILER +----------- +To create U-Boot the CodeSourcery's version of the GNU Toolchain for the ColdFire architecture +compiler set (freescale-coldfire-4.1-elf) from www.codesourcery.com was used. +You can download it from:http://www.codesourcery.com/gnu_toolchains/coldfire/download.html + +compiler that you used - for example, codesourcery_elf requires -MQ in rules.mk, old M68K 2.95.3 just -M +codesourcery_elf requires -MQ in rules.mk, old M68K 2.95.3 just -M diff --git a/include/asm-m68k/immap.h b/include/asm-m68k/immap.h index 3ee7071f399..bf7b51becfa 100644 --- a/include/asm-m68k/immap.h +++ b/include/asm-m68k/immap.h @@ -43,11 +43,34 @@ #define CFG_TMRINTR_NO (31) #define CFG_TMRINTR_MASK (0x00000400) #define CFG_TMRINTR_PEND (CFG_TMRINTR_MASK) -#define CFG_TMRINTR_PRI (0) /* Level must include inorder to work */ +#define CFG_TMRINTR_PRI (MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3) #define CFG_TIMER_PRESCALER (((gd->bus_clk / 2000000) - 1) << 8) #endif #endif /* CONFIG_M5249 */ +#ifdef CONFIG_M5253 +#include +#include +#include + +#define CFG_UART_BASE (MMAP_UART0 + (CFG_UART_PORT * 0x40)) + +#define CFG_INTR_BASE (MMAP_INTC) +#define CFG_NUM_IRQS (64) + +/* Timer */ +#ifdef CONFIG_MCFTMR +#define CFG_UDELAY_BASE (MMAP_DTMR0) +#define CFG_TMR_BASE (MMAP_DTMR1) +#define CFG_TMRPND_REG (mbar_readLong(MCFSIM_IPR)) +#define CFG_TMRINTR_NO (27) +#define CFG_TMRINTR_MASK (0x00000400) +#define CFG_TMRINTR_PEND (CFG_TMRINTR_MASK) +#define CFG_TMRINTR_PRI (MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL3 | MCFSIM_ICR_PRI3) +#define CFG_TIMER_PRESCALER (((gd->bus_clk / 2000000) - 1) << 8) +#endif +#endif /* CONFIG_M5253 */ + #ifdef CONFIG_M5271 #include #include diff --git a/include/asm-m68k/immap_5253.h b/include/asm-m68k/immap_5253.h new file mode 100644 index 00000000000..aafbdd09579 --- /dev/null +++ b/include/asm-m68k/immap_5253.h @@ -0,0 +1,95 @@ +/* + * MCF5253 Internal Memory Map + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __IMMAP_5249__ +#define __IMMAP_5249__ + +#define MMAP_INTC (CFG_MBAR + 0x00000040) +#define MMAP_DTMR0 (CFG_MBAR + 0x00000140) +#define MMAP_DTMR1 (CFG_MBAR + 0x00000180) +#define MMAP_UART0 (CFG_MBAR + 0x000001C0) +#define MMAP_UART1 (CFG_MBAR + 0x00000200) +#define MMAP_I2C0 (CFG_MBAR + 0x00000280) +#define MMAP_QSPI (CFG_MBAR + 0x00000400) +#define MMAP_CAN0 (CFG_MBAR + 0x00010000) +#define MMAP_CAN1 (CFG_MBAR + 0x00011000) + +#define MMAP_I2C1 (CFG_MBAR2 + 0x00000440) +#define MMAP_UART2 (CFG_MBAR2 + 0x00000C00) + +/********************************************************************* +* ATA Module (ATAC) +*********************************************************************/ + +/* Register read/write struct */ +typedef struct atac { + /* PIO */ + u8 toff; /* 0x00 */ + u8 ton; /* 0x01 */ + u8 t1; /* 0x02 */ + u8 t2w; /* 0x03 */ + u8 t2r; /* 0x04 */ + u8 ta; /* 0x05 */ + u8 trd; /* 0x06 */ + u8 t4; /* 0x07 */ + u8 t9; /* 0x08 */ + + /* DMA */ + u8 tm; /* 0x09 */ + u8 tn; /* 0x0A */ + u8 td; /* 0x0B */ + u8 tk; /* 0x0C */ + u8 tack; /* 0x0D */ + u8 tenv; /* 0x0E */ + u8 trp; /* 0x0F */ + u8 tzah; /* 0x10 */ + u8 tmli; /* 0x11 */ + u8 tdvh; /* 0x12 */ + u8 tdzfs; /* 0x13 */ + u8 tdvs; /* 0x14 */ + u8 tcvh; /* 0x15 */ + u8 tss; /* 0x16 */ + u8 tcyc; /* 0x17 */ + + /* FIFO */ + u32 fifo32; /* 0x18 */ + u16 fifo16; /* 0x1C */ + u8 rsvd0[2]; + u8 ffill; /* 0x20 */ + u8 rsvd1[3]; + + /* ATA */ + u8 cr; /* 0x24 */ + u8 rsvd2[3]; + u8 isr; /* 0x28 */ + u8 rsvd3[3]; + u8 ier; /* 0x2C */ + u8 rsvd4[3]; + u8 icr; /* 0x30 */ + u8 rsvd5[3]; + u8 falarm; /* 0x34 */ +} atac_t; + +#endif /* __IMMAP_5249__ */ diff --git a/include/asm-m68k/m5253.h b/include/asm-m68k/m5253.h new file mode 100644 index 00000000000..eda3472738e --- /dev/null +++ b/include/asm-m68k/m5253.h @@ -0,0 +1,73 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef m5253_h +#define m5253_h +/****************************************************************************/ + +/* +* PLL Module (PLL) +*/ + +/* Register read/write macros */ +#define PLL_PLLCR (0x000180) + +#define SIM_RSR (0x000000) +#define SIM_SYPCR (0x000001) +#define SIM_SWIVR (0x000002) +#define SIM_SWSR (0x000003) +#define SIM_MPARK (0x00000C) + +/* Bit definitions and macros for RSR */ +#define SIM_RSR_SWTR (0x20) +#define SIM_RSR_HRST (0x80) + +/* Register read/write macros */ +#define CIM_MISCCR (0x000500) +#define CIM_ATA_DADDR (0x000504) +#define CIM_ATA_DCOUNT (0x000508) +#define CIM_RTC_TIME (0x00050C) +#define CIM_USB_CANCLK (0x000510) + +/* Bit definitions and macros for MISCCR */ +#define CIM_MISCCR_ADTA (0x00000001) +#define CIM_MISCCR_ADTD (0x00000002) +#define CIM_MISCCR_ADIE (0x00000004) +#define CIM_MISCCR_ADIC (0x00000008) +#define CIM_MISCCR_ADIP (0x00000010) +#define CIM_MISCCR_CPUEND (0x00000020) +#define CIM_MISCCR_DMAEND (0x00000040) +#define CIM_MISCCR_RTCCLR (0x00000080) +#define CIM_MISCCR_RTCPL (0x00000100) +#define CIM_MISCCR_URIE (0x00000800) +#define CIM_MISCCR_URIC (0x00001000) +#define CIM_MISCCR_URIP (0x00002000) + +/* Bit definitions and macros for ATA_DADDR */ +#define CIM_ATA_DADDR_ATAADDR(x) (((x)&0x00003FFF)<<2) +#define CIM_ATA_DADDR_RAMADDR(x) (((x)&0x00003FFF)<<18) + +/* Bit definitions and macros for ATA_DCOUNT */ +#define CIM_ATA_DCOUNT_COUNT(x) (((x)&0x0000FFFF)) + +#endif /* m5253_h */ diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h new file mode 100644 index 00000000000..9ad74e2bc67 --- /dev/null +++ b/include/configs/M5253EVBE.h @@ -0,0 +1,213 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * Hayden Fraser (Hayden.Fraser@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _M5253EVBE_H +#define _M5253EVBE_H + +#define CONFIG_MCF52x2 /* define processor family */ +#define CONFIG_M5253 /* define processor type */ +#define CONFIG_M5253EVBE /* define board type */ + +#define CONFIG_MCFTMR + +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) +#define CONFIG_BAUDRATE 19200 +#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } + +#undef CONFIG_WATCHDOG /* disable watchdog */ + +#define CONFIG_BOOTDELAY 5 + +/* Configuration for environment + * Environment is embedded in u-boot in the second sector of the flash + */ +#ifndef CONFIG_MONITOR_IS_IN_RAM +#define CFG_ENV_OFFSET 0x4000 +#define CFG_ENV_SECT_SIZE 0x2000 +#define CFG_ENV_IS_IN_FLASH 1 +#else +#define CFG_ENV_ADDR 0xffe04000 +#define CFG_ENV_SECT_SIZE 0x2000 +#define CFG_ENV_IS_IN_FLASH 1 +#endif + +/* + * BOOTP options + */ +#undef CONFIG_BOOTP_BOOTFILESIZE +#undef CONFIG_BOOTP_BOOTPATH +#undef CONFIG_BOOTP_GATEWAY +#undef CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include +#undef CONFIG_CMD_NET +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_IDE +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC + +/* ATA */ +#define CONFIG_DOS_PARTITION +#define CONFIG_MAC_PARTITION +#define CONFIG_IDE_RESET 1 +#define CONFIG_IDE_PREINIT 1 +#define CONFIG_ATAPI +#undef CONFIG_LBA48 + +#define CFG_IDE_MAXBUS 1 +#define CFG_IDE_MAXDEVICE 2 + +#define CFG_ATA_BASE_ADDR (CFG_MBAR2 + 0x800) +#define CFG_ATA_IDE0_OFFSET 0 + +#define CFG_ATA_DATA_OFFSET 0xA0 /* Offset for data I/O */ +#define CFG_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */ +#define CFG_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */ +#define CFG_ATA_STRIDE 4 /* Interval between registers */ +#define _IO_BASE 0 + +#define CFG_PROMPT "=> " +#define CFG_LONGHELP /* undef to save memory */ + +#if defined(CONFIG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_LOAD_ADDR 0x00100000 + +#define CFG_MEMTEST_START 0x400 +#define CFG_MEMTEST_END 0x380000 + +#define CFG_HZ 1000 + +#undef CFG_PLL_BYPASS /* bypass PLL for test purpose */ +#define CFG_FAST_CLK +#ifdef CFG_FAST_CLK +# define CFG_PLLCR 0x1243E054 +# define CFG_CLK 140000000 +#else +# define CFG_PLLCR 0x135a4140 +# define CFG_CLK 70000000 +#endif + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ + +#define CFG_MBAR 0x10000000 /* Register Base Addrs */ +#define CFG_MBAR2 0x80000000 /* Module Base Addrs 2 */ + +/* + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR 0x20000000 +#define CFG_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */ +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/* + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ + +#ifdef CONFIG_MONITOR_IS_IN_RAM +#define CFG_MONITOR_BASE 0x20000 +#else +#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) +#endif + +#define CFG_MONITOR_LEN 0x40000 +#define CFG_MALLOC_LEN (256 << 10) +#define CFG_BOOTPARAMS_LEN (64*1024) + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization ?? + */ +#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) + +/* FLASH organization */ +#define CFG_FLASH_BASE 0xffe00000 +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 35 /* max number of sectors on one chip */ +#define CFG_FLASH_ERASE_TOUT 1000 + +#define CFG_FLASH_CFI 1 +#define CFG_FLASH_CFI_DRIVER 1 +#define CFG_FLASH_SIZE 0x200000 +#define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT + +/* Cache Configuration */ +#define CFG_CACHELINE_SIZE 16 + +/* Port configuration */ +#define CFG_FECI2C 0xF0 + +#define CFG_CSAR0 0xFFE0 +#define CFG_CSMR0 0x001F0021 +#define CFG_CSCR0 0x1D80 + +#define CFG_CSAR1 0 +#define CFG_CSMR1 0 +#define CFG_CSCR1 0 + +#define CFG_CSAR2 0 +#define CFG_CSMR2 0 +#define CFG_CSCR2 0 + +#define CFG_CSAR3 0 +#define CFG_CSMR3 0 +#define CFG_CSCR3 0 + +/*----------------------------------------------------------------------- + * Port configuration + */ +#define CFG_GPIO_FUNC 0x00000008 /* Set gpio pins: none */ +#define CFG_GPIO1_FUNC 0x00df00f0 /* 36-39(SWITCH),48-52(FPGAs),54 */ +#define CFG_GPIO_EN 0x00000008 /* Set gpio output enable */ +#define CFG_GPIO1_EN 0x00c70000 /* Set gpio output enable */ +#define CFG_GPIO_OUT 0x00000008 /* Set outputs to default state */ +#define CFG_GPIO1_OUT 0x00c70000 /* Set outputs to default state */ +#define CFG_GPIO1_LED 0x00400000 /* user led */ + +#endif /* _M5253EVB_H */ + diff --git a/lib_m68k/interrupts.c b/lib_m68k/interrupts.c old mode 100644 new mode 100755 index 8919c0e8cba..1635d6fed5e --- a/lib_m68k/interrupts.c +++ b/lib_m68k/interrupts.c @@ -106,8 +106,6 @@ void int_handler (struct pt_regs *fp) vec = (fp->vector >> 2) & 0xff; if (vec > 0x40) vec -= 0x40; - else - return; if (irq_vecs[vec].handler != NULL) { irq_vecs[vec].handler (irq_vecs[vec].arg); -- cgit v1.3.1 From 8ae158cd87a4a25722b27835261b6ff0fa2aa6a7 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 16 Aug 2007 15:05:11 -0500 Subject: ColdFire: Add M54455EVB for MCF5445x Signed-off-by: TsiChungLiew --- CREDITS | 2 +- MAINTAINERS | 9 + MAKEALL | 1 + Makefile | 28 + README | 1 + board/freescale/m54455evb/Makefile | 44 + board/freescale/m54455evb/config.mk | 25 + board/freescale/m54455evb/flash.c | 974 +++++++++++++++++++++ board/freescale/m54455evb/m54455evb.c | 165 ++++ board/freescale/m54455evb/mii.c | 320 +++++++ board/freescale/m54455evb/u-boot.lds | 144 +++ common/cmd_bdinfo.c | 22 +- cpu/mcf5445x/Makefile | 48 + cpu/mcf5445x/config.mk | 27 + cpu/mcf5445x/cpu.c | 97 +++ cpu/mcf5445x/cpu_init.c | 140 +++ cpu/mcf5445x/interrupts.c | 52 ++ cpu/mcf5445x/pci.c | 189 ++++ cpu/mcf5445x/speed.c | 186 ++++ cpu/mcf5445x/start.S | 388 +++++++++ doc/README.m54455evb | 416 +++++++++ drivers/net/mcffec.c | 27 +- include/asm-m68k/global_data.h | 8 + include/asm-m68k/immap.h | 40 + include/asm-m68k/immap_5445x.h | 937 ++++++++++++++++++++ include/asm-m68k/m5445x.h | 1541 +++++++++++++++++++++++++++++++++ include/asm-m68k/rtc.h | 3 +- include/asm-m68k/u-boot.h | 8 + include/configs/M54455EVB.h | 391 +++++++++ lib_m68k/board.c | 30 +- lib_m68k/interrupts.c | 0 lib_m68k/m68k_linux.c | 376 ++++---- 32 files changed, 6459 insertions(+), 180 deletions(-) create mode 100644 board/freescale/m54455evb/Makefile create mode 100644 board/freescale/m54455evb/config.mk create mode 100644 board/freescale/m54455evb/flash.c create mode 100644 board/freescale/m54455evb/m54455evb.c create mode 100644 board/freescale/m54455evb/mii.c create mode 100644 board/freescale/m54455evb/u-boot.lds create mode 100644 cpu/mcf5445x/Makefile create mode 100644 cpu/mcf5445x/config.mk create mode 100644 cpu/mcf5445x/cpu.c create mode 100644 cpu/mcf5445x/cpu_init.c create mode 100644 cpu/mcf5445x/interrupts.c create mode 100644 cpu/mcf5445x/pci.c create mode 100644 cpu/mcf5445x/speed.c create mode 100644 cpu/mcf5445x/start.S create mode 100644 doc/README.m54455evb create mode 100644 include/asm-m68k/immap_5445x.h create mode 100644 include/asm-m68k/m5445x.h create mode 100644 include/configs/M54455EVB.h mode change 100755 => 100644 lib_m68k/interrupts.c (limited to 'include/configs') diff --git a/CREDITS b/CREDITS index b1abad32a21..f30b2228fbb 100644 --- a/CREDITS +++ b/CREDITS @@ -491,7 +491,7 @@ W: www.monstr.eu N: TsiChung Liew E: Tsi-Chung.Liew@freescale.com -D: Support for ColdFire MCF532x +D: Support for ColdFire MCF532x, MCF5445x W: www.freescale.com N: Hayden Fraser diff --git a/MAINTAINERS b/MAINTAINERS index d5249e51553..7fde6d99efe 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -606,6 +606,15 @@ Zachary P. Landau r5200 mcf52x2 +TsiChung Liew + + M5329EVB mcf532x + M54455EVB mcf5445x + +Hayden Fraser + + M5253EVBE mcf52x2 + ######################################################################### # AVR32 Systems: # # # diff --git a/MAKEALL b/MAKEALL index 890ee39a78f..b7ed0f4305c 100755 --- a/MAKEALL +++ b/MAKEALL @@ -624,6 +624,7 @@ LIST_coldfire=" \ M5272C3 \ M5282EVB \ M5329EVB \ + M54455EVB \ r5200 \ TASREG \ " diff --git a/Makefile b/Makefile index e5995ebfc40..201ad0e7789 100644 --- a/Makefile +++ b/Makefile @@ -1692,6 +1692,34 @@ M5329BFEE_config : unconfig fi @$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale +M54455EVB_config \ +M54455EVB_atmel_config \ +M54455EVB_intel_config \ +M54455EVB_a33_config \ +M54455EVB_a66_config \ +M54455EVB_i33_config \ +M54455EVB_i66_config : unconfig + @case "$@" in \ + M54455EVB_config) FLASH=ATMEL; FREQ=33333333;; \ + M54455EVB_atmel_config) FLASH=ATMEL; FREQ=33333333;; \ + M54455EVB_intel_config) FLASH=INTEL; FREQ=33333333;; \ + M54455EVB_a33_config) FLASH=ATMEL; FREQ=33333333;; \ + M54455EVB_a66_config) FLASH=ATMEL; FREQ=66666666;; \ + M54455EVB_i33_config) FLASH=INTEL; FREQ=33333333;; \ + M54455EVB_i66_config) FLASH=INTEL; FREQ=66666666;; \ + esac; \ + >include/config.h ; \ + if [ "$${FLASH}" == "INTEL" ] ; then \ + echo "#undef CFG_ATMEL_BOOT" >> include/config.h ; \ + echo "... with INTEL boot..." ; \ + else \ + echo "#define CFG_ATMEL_BOOT" >> include/config.h ; \ + echo "... with ATMEL boot..." ; \ + fi; \ + echo "#define CFG_INPUT_CLKSRC $${FREQ}" >>include/config.h ; \ + echo "... with $${FREQ}Hz input clock" + @$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale + ######################################################################### ## MPC83xx Systems ######################################################################### diff --git a/README b/README index 4f2acb40d1f..4b1982b221f 100644 --- a/README +++ b/README @@ -137,6 +137,7 @@ Directory Hierarchy: - ixp Files specific to Intel XScale IXP CPUs - mcf52x2 Files specific to Freescale ColdFire MCF52x2 CPUs - mcf532x Files specific to Freescale ColdFire MCF5329 CPUs + - mcf5445x Files specific to Freescale ColdFire MCF5445x CPUs - mips Files specific to MIPS CPUs - mpc5xx Files specific to Freescale MPC5xx CPUs - mpc5xxx Files specific to Freescale MPC5xxx CPUs diff --git a/board/freescale/m54455evb/Makefile b/board/freescale/m54455evb/Makefile new file mode 100644 index 00000000000..ca9a7729e1c --- /dev/null +++ b/board/freescale/m54455evb/Makefile @@ -0,0 +1,44 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o flash.o mii.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### \ No newline at end of file diff --git a/board/freescale/m54455evb/config.mk b/board/freescale/m54455evb/config.mk new file mode 100644 index 00000000000..ce014edca8f --- /dev/null +++ b/board/freescale/m54455evb/config.mk @@ -0,0 +1,25 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Coldfire contribution by Bernhard Kuhn +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0 diff --git a/board/freescale/m54455evb/flash.c b/board/freescale/m54455evb/flash.c new file mode 100644 index 00000000000..de2cca863a9 --- /dev/null +++ b/board/freescale/m54455evb/flash.c @@ -0,0 +1,974 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +#include + +#ifndef CFG_FLASH_CFI +typedef unsigned char FLASH_PORT_WIDTH; +typedef volatile unsigned char FLASH_PORT_WIDTHV; + +#define FPW FLASH_PORT_WIDTH +#define FPWV FLASH_PORT_WIDTHV + +#define CFG_FLASH_CFI_WIDTH FLASH_CFI_8BIT +#define CFG_FLASH_NONCFI_WIDTH FLASH_CFI_8BIT + +/* Intel-compatible flash commands */ +#define INTEL_PROGRAM 0x00100010 +#define INTEL_ERASE 0x00200020 +#define INTEL_WRSETUP 0x00400040 +#define INTEL_CLEAR 0x00500050 +#define INTEL_LOCKBIT 0x00600060 +#define INTEL_PROTECT 0x00010001 +#define INTEL_STATUS 0x00700070 +#define INTEL_READID 0x00900090 +#define INTEL_CFIQRY 0x00980098 +#define INTEL_SUSERASE 0x00B000B0 +#define INTEL_PROTPROG 0x00C000C0 +#define INTEL_CONFIRM 0x00D000D0 +#define INTEL_WRBLK 0x00e800e8 +#define INTEL_RESET 0x00FF00FF + +/* Intel-compatible flash status bits */ +#define INTEL_FINISHED 0x00800080 +#define INTEL_OK 0x00800080 +#define INTEL_ERASESUS 0x00600060 +#define INTEL_WSM_SUS (INTEL_FINISHED | INTEL_ERASESUS) + +/* 28F160C3B CFI Data offset - This could vary */ +#define INTEL_CFI_MFG 0x00 /* Manufacturer ID */ +#define INTEL_CFI_PART 0x01 /* Product ID */ +#define INTEL_CFI_LOCK 0x02 /* */ +#define INTEL_CFI_TWPRG 0x1F /* Typical Single Word Program Timeout 2^n us */ +#define INTEL_CFI_MBUFW 0x20 /* Typical Max Buffer Write Timeout 2^n us */ +#define INTEL_CFI_TERB 0x21 /* Typical Block Erase Timeout 2^n ms */ +#define INTEL_CFI_MWPRG 0x23 /* Maximum Word program timeout 2^n us */ +#define INTEL_CFI_MERB 0x25 /* Maximum Block Erase Timeout 2^n s */ +#define INTEL_CFI_SIZE 0x27 /* Device size 2^n bytes */ +#define INTEL_CFI_CAP 0x28 +#define INTEL_CFI_WRBUF 0x2A +#define INTEL_CFI_BANK 0x2C /* Number of Bank */ +#define INTEL_CFI_BLK1A 0x2D /* Number of Blocks */ +#define INTEL_CFI_BLK1B 0x2E /* Number of Blocks */ +#define INTEL_CFI_SZ1A 0x2F /* Block Region Size */ +#define INTEL_CFI_SZ1B 0x30 +#define INTEL_CFI_BLK2A 0x31 +#define INTEL_CFI_BLK2B 0x32 +#define INTEL_CFI_SZ2A 0x33 +#define INTEL_CFI_SZ2B 0x34 + +#define FLASH_CYCLE1 0x0555 +#define FLASH_CYCLE2 0x0aaa + +#define WR_BLOCK 0x20 + +/* not in the flash.h yet */ +#define FLASH_28F64P30T 0x00B9 /* Intel 28F64P30T ( 64M) */ +#define FLASH_28F64P30B 0x00BA /* Intel 28F64P30B ( 64M) */ +#define FLASH_28F128P30T 0x00BB /* Intel 28F128P30T ( 128M = 8M x 16 ) */ +#define FLASH_28F128P30B 0x00BC /* Intel 28F128P30B ( 128M = 8M x 16 ) */ +#define FLASH_28F256P30T 0x00BD /* Intel 28F256P30T ( 256M = 16M x 16 ) */ +#define FLASH_28F256P30B 0x00BE /* Intel 28F256P30B ( 256M = 16M x 16 ) */ + +#define SYNC __asm__("nop") + +/*----------------------------------------------------------------------- + * Functions + */ + +ulong flash_get_size(FPWV * addr, flash_info_t * info); +int flash_get_offsets(ulong base, flash_info_t * info); +int flash_cmd_rd(volatile u16 * addr, int index); +int write_data(flash_info_t * info, ulong dest, FPW data); +int write_data_block(flash_info_t * info, ulong src, ulong dest); +int write_word_atm(flash_info_t * info, volatile u8 * dest, u16 data); +void inline spin_wheel(void); +void flash_sync_real_protect(flash_info_t * info); +uchar intel_sector_protected(flash_info_t * info, ushort sector); + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; + +ulong flash_init(void) +{ + int i; + ulong size = 0; + ulong fbase = 0; + + for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { + memset(&flash_info[i], 0, sizeof(flash_info_t)); + + switch (i) { + case 0: + fbase = (ulong) CFG_FLASH0_BASE; + break; + case 1: + fbase = (ulong) CFG_FLASH1_BASE; + break; + } + + flash_get_size((FPWV *) fbase, &flash_info[i]); + flash_get_offsets((ulong) fbase, &flash_info[i]); + fbase += flash_info[i].size; + size += flash_info[i].size; + + /* get the h/w and s/w protection status in sync */ + flash_sync_real_protect(&flash_info[i]); + } + + /* Protect monitor and environment sectors */ + flash_protect(FLAG_PROTECT_SET, + CFG_MONITOR_BASE, + CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]); + + return size; +} + +int flash_get_offsets(ulong base, flash_info_t * info) +{ + int i, j, k; + int sectors, bs, banks; + ulong start; + + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_ATM) { + int sect[] = CFG_ATMEL_SECT; + int sectsz[] = CFG_ATMEL_SECTSZ; + + info->start[0] = base; + for (k = 0, i = 0; i < CFG_ATMEL_REGION; i++) { + for (j = 0; j < sect[i]; j++, k++) { + info->start[k + 1] = info->start[k] + sectsz[i]; + info->protect[k] = 0; + } + } + } + + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { + volatile u16 *addr16 = (volatile u16 *)base; + + *addr16 = (FPW) INTEL_RESET; /* restore read mode */ + *addr16 = (FPW) INTEL_READID; + + banks = addr16[INTEL_CFI_BANK] & 0xff; + + sectors = 0; + info->start[0] = base; + + for (k = 0, i = 0; i < banks; i++) { + /* Geometry y1 = y1 + 1, y2 = y2 + 1, CFI spec. + * To be exact, Z = [0x2f 0x30] (LE) * 256 bytes * [0x2D 0x2E] block count + * Z = [0x33 0x34] (LE) * 256 bytes * [0x31 0x32] block count + */ + bs = ((((addr16[INTEL_CFI_SZ1B + (i * 4)] & 0xff) << 8) + | (addr16[INTEL_CFI_SZ1A + (i * 4)] & 0xff)) * + 0x100); + sectors = + (addr16[INTEL_CFI_BLK1A + (i * 4)] & 0xff) + 1; + + for (j = 0; j < sectors; j++, k++) { + info->start[k + 1] = info->start[k] + bs; + } + } + + *addr16 = (FPW) INTEL_RESET; /* restore read mode */ + } + + return ERR_OK; +} + +void flash_print_info(flash_info_t * info) +{ + int i; + + switch (info->flash_id & FLASH_VENDMASK) { + case FLASH_MAN_INTEL: + printf("INTEL "); + break; + case FLASH_MAN_ATM: + printf("ATMEL "); + break; + default: + printf("Unknown Vendor "); + break; + } + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_AT040: + printf("AT49BV040A\n"); + break; + case FLASH_28F128J3A: + printf("Intel 28F128J3A\n"); + break; + default: + printf("Unknown Chip Type\n"); + return; + } + + if (info->size > 0x100000) { + int remainder; + + printf(" Size: %ld", info->size >> 20); + + remainder = (info->size % 0x100000); + if (remainder) { + remainder >>= 10; + remainder = (int)((float) + (((float)remainder / (float)1024) * + 10000)); + printf(".%d ", remainder); + } + + printf("MB in %d Sectors\n", info->sector_count); + } else + printf(" Size: %ld KB in %d Sectors\n", + info->size >> 10, info->sector_count); + + printf(" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; ++i) { + if ((i % 5) == 0) + printf("\n "); + printf(" %08lX%s", + info->start[i], info->protect[i] ? " (RO)" : " "); + } + printf("\n"); +} + +/* + * The following code cannot be run from FLASH! + */ +ulong flash_get_size(FPWV * addr, flash_info_t * info) +{ + volatile u16 *addr16 = (volatile u16 *)addr; + int intel = 0, banks = 0; + u16 value; + int i; + + addr[FLASH_CYCLE1] = (FPWV) 0x00AA00AA; /* for Atmel, Intel ignores this */ + addr[FLASH_CYCLE2] = (FPWV) 0x00550055; /* for Atmel, Intel ignores this */ + addr[FLASH_CYCLE1] = (FPWV) 0x00900090; /* selects Intel or Atmel */ + + switch (addr[0] & 0xff) { + case (u8) ATM_MANUFACT: + info->flash_id = FLASH_MAN_ATM; + value = addr[1]; + break; + case (u8) INTEL_MANUFACT: + /* Terminate Atmel ID read */ + addr[0] = (FPWV) 0x00F000F0; + /* Write auto select command: read Manufacturer ID */ + /* Write auto select command sequence and test FLASH answer */ + *addr16 = (FPW) INTEL_RESET; /* restore read mode */ + *addr16 = (FPW) INTEL_READID; + + info->flash_id = FLASH_MAN_INTEL; + value = (addr16[INTEL_CFI_MFG] << 8); + value |= addr16[INTEL_CFI_PART] & 0xff; + intel = 1; + break; + default: + printf("Unknown Flash\n"); + info->flash_id = FLASH_UNKNOWN; + info->sector_count = 0; + info->size = 0; + + *addr = (FPW) 0x00F000F0; + *addr = (FPW) INTEL_RESET; /* restore read mode */ + return (0); /* no or unknown flash */ + } + + switch (value) { + case (u8) ATM_ID_LV040: + info->flash_id += FLASH_AT040; + break; + case (u16) INTEL_ID_28F128J3: + info->flash_id += FLASH_28F128J3A; + break; + case (u16) INTEL_ID_28F64P30T: + info->flash_id += FLASH_28F64P30T; + break; + case (u16) INTEL_ID_28F64P30B: + info->flash_id += FLASH_28F64P30B; + break; + case (u16) INTEL_ID_28F128P30T: + info->flash_id += FLASH_28F128P30T; + break; + case (u16) INTEL_ID_28F128P30B: + info->flash_id += FLASH_28F128P30B; + break; + case (u16) INTEL_ID_28F256P30T: + info->flash_id += FLASH_28F256P30T; + break; + case (u16) INTEL_ID_28F256P30B: + info->flash_id += FLASH_28F256P30B; + break; + default: + info->flash_id = FLASH_UNKNOWN; + break; + } + + if (intel) { + /* Intel spec. under CFI section */ + u32 sz; + int sectors, bs; + + banks = addr16[INTEL_CFI_BANK] & 0xff; + + sectors = sz = 0; + for (i = 0; i < banks; i++) { + /* Geometry y1 = y1 + 1, y2 = y2 + 1, CFI spec. + * To be exact, Z = [0x2f 0x30] (LE) * 256 bytes * [0x2D 0x2E] block count + * Z = [0x33 0x34] (LE) * 256 bytes * [0x31 0x32] block count + */ + bs = ((((addr16[INTEL_CFI_SZ1B + (i * 4)] & 0xff) << 8) + | (addr16[INTEL_CFI_SZ1A + (i * 4)] & 0xff)) * + 0x100); + sectors += + (addr16[INTEL_CFI_BLK1A + (i * 4)] & 0xff) + 1; + sz += (bs * sectors); + } + + info->sector_count = sectors; + info->size = sz; + *addr = (FPW) INTEL_RESET; /* restore read mode */ + } else { + int sect[] = CFG_ATMEL_SECT; + int sectsz[] = CFG_ATMEL_SECTSZ; + + info->sector_count = 0; + info->size = 0; + for (i = 0; i < CFG_ATMEL_REGION; i++) { + info->sector_count += sect[i]; + info->size += sect[i] * sectsz[i]; + } + + /* reset ID mode */ + addr[0] = (FPWV) 0x00F000F0; + } + + if (info->sector_count > CFG_MAX_FLASH_SECT) { + printf("** ERROR: sector count %d > max (%d) **\n", + info->sector_count, CFG_MAX_FLASH_SECT); + info->sector_count = CFG_MAX_FLASH_SECT; + } + + return (info->size); +} + +int flash_cmd_rd(volatile u16 * addr, int index) +{ + return (int)addr[index]; +} + +/* + * This function gets the u-boot flash sector protection status + * (flash_info_t.protect[]) in sync with the sector protection + * status stored in hardware. + */ +void flash_sync_real_protect(flash_info_t * info) +{ + int i; + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_28F160C3B: + case FLASH_28F160C3T: + case FLASH_28F320C3B: + case FLASH_28F320C3T: + case FLASH_28F640C3B: + case FLASH_28F640C3T: + for (i = 0; i < info->sector_count; ++i) { + info->protect[i] = intel_sector_protected(info, i); + } + break; + default: + /* no h/w protect support */ + break; + } +} + +/* + * checks if "sector" in bank "info" is protected. Should work on intel + * strata flash chips 28FxxxJ3x in 8-bit mode. + * Returns 1 if sector is protected (or timed-out while trying to read + * protection status), 0 if it is not. + */ +uchar intel_sector_protected(flash_info_t * info, ushort sector) +{ + FPWV *addr; + FPWV *lock_conf_addr; + ulong start; + unsigned char ret; + + /* + * first, wait for the WSM to be finished. The rationale for + * waiting for the WSM to become idle for at most + * CFG_FLASH_ERASE_TOUT is as follows. The WSM can be busy + * because of: (1) erase, (2) program or (3) lock bit + * configuration. So we just wait for the longest timeout of + * the (1)-(3), i.e. the erase timeout. + */ + + /* wait at least 35ns (W12) before issuing Read Status Register */ + /*udelay(1); */ + addr = (FPWV *) info->start[sector]; + *addr = (FPW) INTEL_STATUS; + + start = get_timer(0); + while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) { + if (get_timer(start) > CFG_FLASH_UNLOCK_TOUT) { + *addr = (FPW) INTEL_RESET; /* restore read mode */ + printf("WSM busy too long, can't get prot status\n"); + return 1; + } + } + + /* issue the Read Identifier Codes command */ + *addr = (FPW) INTEL_READID; + + /* Intel example code uses offset of 4 for 8-bit flash */ + lock_conf_addr = (FPWV *) info->start[sector]; + ret = (lock_conf_addr[INTEL_CFI_LOCK] & (FPW) INTEL_PROTECT) ? 1 : 0; + + /* put flash back in read mode */ + *addr = (FPW) INTEL_RESET; + + return ret; +} + +int flash_erase(flash_info_t * info, int s_first, int s_last) +{ + int flag, prot, sect; + ulong type, start, last; + int rcode = 0, intel = 0; + + if ((s_first < 0) || (s_first > s_last)) { + if (info->flash_id == FLASH_UNKNOWN) + printf("- missing\n"); + else + printf("- no sectors to erase\n"); + return 1; + } + + type = (info->flash_id & FLASH_VENDMASK); + + if (type != (FLASH_MAN_INTEL & FLASH_VENDMASK)) { + if (type != (FLASH_MAN_ATM & FLASH_VENDMASK)) { + type = (info->flash_id & FLASH_VENDMASK); + printf + ("Can't erase unknown flash type %08lx - aborted\n", + info->flash_id); + return 1; + } + } + + if (type == FLASH_MAN_INTEL) + intel = 1; + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + + if (prot) + printf("- Warning: %d protected sectors will not be erased!\n", + prot); + else + printf("\n"); + + start = get_timer(0); + last = start; + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect <= s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + + FPWV *addr = (FPWV *) (info->start[sect]); + int min = 0; + + printf("."); + + /* arm simple, non interrupt dependent timer */ + start = get_timer(0); + + if (intel) { + *addr = (FPW) INTEL_READID; + min = addr[INTEL_CFI_TERB] & 0xff; + min = 1 << min; /* ms */ + min = (min / info->sector_count) * 1000; + + /* start erase block */ + *addr = (FPW) INTEL_CLEAR; /* clear status register */ + *addr = (FPW) INTEL_ERASE; /* erase setup */ + *addr = (FPW) INTEL_CONFIRM; /* erase confirm */ + + while ((*addr & (FPW) INTEL_FINISHED) != + (FPW) INTEL_FINISHED) { + + if (get_timer(start) > + CFG_FLASH_ERASE_TOUT) { + printf("Timeout\n"); + *addr = (FPW) INTEL_SUSERASE; /* suspend erase */ + *addr = (FPW) INTEL_RESET; /* reset to read mode */ + + rcode = 1; + break; + } + } + + *addr = (FPW) INTEL_RESET; /* resest to read mode */ + } else { + FPWV *base; /* first address in bank */ + FPWV *atmeladdr; + + flag = disable_interrupts(); + + atmeladdr = (FPWV *) addr; /* concatenate to 8 bit */ + base = (FPWV *) (CFG_ATMEL_BASE); /* First sector */ + + base[FLASH_CYCLE1] = (u8) 0x00AA00AA; /* unlock */ + base[FLASH_CYCLE2] = (u8) 0x00550055; /* unlock */ + base[FLASH_CYCLE1] = (u8) 0x00800080; /* erase mode */ + base[FLASH_CYCLE1] = (u8) 0x00AA00AA; /* unlock */ + base[FLASH_CYCLE2] = (u8) 0x00550055; /* unlock */ + *atmeladdr = (u8) 0x00300030; /* erase sector */ + + if (flag) + enable_interrupts(); + + while ((*atmeladdr & (u8) 0x00800080) != + (u8) 0x00800080) { + if (get_timer(start) > + CFG_FLASH_ERASE_TOUT) { + printf("Timeout\n"); + *atmeladdr = (u8) 0x00F000F0; /* reset to read mode */ + + rcode = 1; + break; + } + } + + *atmeladdr = (u8) 0x00F000F0; /* reset to read mode */ + } /* Atmel or Intel */ + } + } + printf(" done\n"); + + return rcode; +} + +int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) +{ + if (info->flash_id == FLASH_UNKNOWN) + return 4; + + switch (info->flash_id & FLASH_VENDMASK) { + case FLASH_MAN_ATM: + { + u16 data = 0; + int bytes; /* number of bytes to program in current word */ + int left; /* number of bytes left to program */ + int i, res; + + for (left = cnt, res = 0; + left > 0 && res == 0; + addr += sizeof(data), left -= + sizeof(data) - bytes) { + + bytes = addr & (sizeof(data) - 1); + addr &= ~(sizeof(data) - 1); + + /* combine source and destination data so can program + * an entire word of 16 or 32 bits + */ + for (i = 0; i < sizeof(data); i++) { + data <<= 8; + if (i < bytes || i - bytes >= left) + data += *((uchar *) addr + i); + else + data += *src++; + } + + data = (data >> 8) | (data << 8); + res = write_word_atm(info, (FPWV *) addr, data); + } + return res; + } /* case FLASH_MAN_ATM */ + + case FLASH_MAN_INTEL: + { + ulong cp, wp; + u16 data; + int count, i, l, rc, port_width; + + /* get lower word aligned address */ + wp = addr; + port_width = sizeof(FPW); + + /* + * handle unaligned start bytes + */ + if ((l = addr - wp) != 0) { + data = 0; + for (i = 0, cp = wp; i < l; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + + for (; i < port_width && cnt > 0; ++i) { + data = (data << 8) | *src++; + --cnt; + ++cp; + } + + for (; cnt == 0 && i < port_width; ++i, ++cp) + data = (data << 8) | (*(uchar *) cp); + + if ((rc = write_data(info, wp, data)) != 0) + return (rc); + + wp += port_width; + } + + if (cnt > WR_BLOCK) { + /* + * handle word aligned part + */ + count = 0; + while (cnt >= WR_BLOCK) { + + if ((rc = + write_data_block(info, + (ulong) src, + wp)) != 0) + return (rc); + + wp += WR_BLOCK; + src += WR_BLOCK; + cnt -= WR_BLOCK; + + if (count++ > 0x800) { + spin_wheel(); + count = 0; + } + } + } + + /* handle word aligned part */ + if (cnt < WR_BLOCK) { + /* + * handle word aligned part + */ + count = 0; + while (cnt >= port_width) { + data = 0; + for (i = 0; i < port_width; ++i) + data = (data << 8) | *src++; + + if ((rc = + write_data(info, + (ulong) ((FPWV *) wp), + (FPW) (data))) != 0) + return (rc); + + wp += port_width; + cnt -= port_width; + if (count++ > 0x800) { + spin_wheel(); + count = 0; + } + } + } + + if (cnt == 0) + return ERR_OK; + + /* + * handle unaligned tail bytes + */ + data = 0; + for (i = 0, cp = wp; i < port_width && cnt > 0; + ++i, ++cp) { + data = (data << 8) | (*src++); + --cnt; + } + for (; i < port_width; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + + return write_data(info, (ulong) ((FPWV *) wp), + (FPW) data); + + } /* case FLASH_MAN_INTEL */ + + } /* switch */ + + return ERR_OK; +} + +/*----------------------------------------------------------------------- + * Write a word or halfword to Flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +int write_data_block(flash_info_t * info, ulong src, ulong dest) +{ + FPWV *srcaddr = (FPWV *) src; + FPWV *dstaddr = (FPWV *) dest; + ulong start; + int flag, i; + + /* Check if Flash is (sufficiently) erased */ + for (i = 0; i < WR_BLOCK; i++) + if ((*dstaddr++ & 0xff) != 0xff) { + printf("not erased at %08lx (%lx)\n", + (ulong) dstaddr, *dstaddr); + return (2); + } + + dstaddr = (FPWV *) dest; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + *dstaddr = (FPW) INTEL_WRBLK; /* write block setup */ + + if (flag) + enable_interrupts(); + + /* arm simple, non interrupt dependent timer */ + start = get_timer(0); + + /* wait while polling the status register */ + while ((*dstaddr & (FPW) INTEL_FINISHED) != (FPW) INTEL_OK) { + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + *dstaddr = (FPW) INTEL_RESET; /* restore read mode */ + return (1); + } + } + + *dstaddr = (FPW) WR_BLOCK - 1; /* write 32 to buffer */ + for (i = 0; i < WR_BLOCK; i++) + *dstaddr++ = *srcaddr++; + + dstaddr -= 1; + *dstaddr = (FPW) INTEL_CONFIRM; /* write 32 to buffer */ + + /* arm simple, non interrupt dependent timer */ + start = get_timer(0); + + /* wait while polling the status register */ + while ((*dstaddr & (FPW) INTEL_FINISHED) != (FPW) INTEL_OK) { + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + *dstaddr = (FPW) INTEL_RESET; /* restore read mode */ + return (1); + } + } + + *dstaddr = (FPW) INTEL_RESET; /* restore read mode */ + + return (0); +} + +/*----------------------------------------------------------------------- + * Write a word or halfword to Flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +int write_data(flash_info_t * info, ulong dest, FPW data) +{ + FPWV *addr = (FPWV *) dest; + ulong start; + int flag; + + /* Check if Flash is (sufficiently) erased */ + if ((*addr & data) != data) { + printf("not erased at %08lx (%lx)\n", (ulong) addr, + (ulong) * addr); + return (2); + } + + /* Disable interrupts which might cause a timeout here */ + flag = (int)disable_interrupts(); + + *addr = (FPW) INTEL_CLEAR; + *addr = (FPW) INTEL_RESET; + + *addr = (FPW) INTEL_WRSETUP; /* write setup */ + *addr = data; + + if (flag) + enable_interrupts(); + + /* arm simple, non interrupt dependent timer */ + start = get_timer(0); + + /* wait while polling the status register */ + while ((*addr & (FPW) INTEL_OK) != (FPW) INTEL_OK) { + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + *addr = (FPW) INTEL_SUSERASE; /* suspend mode */ + *addr = (FPW) INTEL_CLEAR; /* clear status */ + *addr = (FPW) INTEL_RESET; /* reset */ + return (1); + } + } + + *addr = (FPW) INTEL_CLEAR; /* clear status */ + *addr = (FPW) INTEL_RESET; /* restore read mode */ + + return (0); +} + +/*----------------------------------------------------------------------- + * Write a word to Flash for ATMEL FLASH + * A word is 16 bits, whichever the bus width of the flash bank + * (not an individual chip) is. + * + * returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +int write_word_atm(flash_info_t * info, volatile u8 * dest, u16 data) +{ + ulong start; + int flag, i; + int res = 0; /* result, assume success */ + FPWV *base; /* first address in flash bank */ + + /* Check if Flash is (sufficiently) erased */ + if ((*((volatile u16 *)dest) & data) != data) { + return (2); + } + + base = (FPWV *) (CFG_ATMEL_BASE); + + for (i = 0; i < sizeof(u16); i++) { + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + base[FLASH_CYCLE1] = (u8) 0x00AA00AA; /* unlock */ + base[FLASH_CYCLE2] = (u8) 0x00550055; /* unlock */ + base[FLASH_CYCLE1] = (u8) 0x00A000A0; /* selects program mode */ + + *dest = data; /* start programming the data */ + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + start = get_timer(0); + + /* data polling for D7 */ + while (res == 0 + && (*dest & (u8) 0x00800080) != + (data & (u8) 0x00800080)) { + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + *dest = (u8) 0x00F000F0; /* reset bank */ + res = 1; + } + } + + *dest++ = (u8) 0x00F000F0; /* reset bank */ + data >>= 8; + } + + return (res); +} + +void inline spin_wheel(void) +{ + static int p = 0; + static char w[] = "\\/-"; + + printf("\010%c", w[p]); + (++p == 3) ? (p = 0) : 0; +} + +#ifdef CFG_FLASH_PROTECTION +/*----------------------------------------------------------------------- + */ +int flash_real_protect(flash_info_t * info, long sector, int prot) +{ + int rcode = 0; /* assume success */ + FPWV *addr; /* address of sector */ + FPW value; + + addr = (FPWV *) (info->start[sector]); + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_28F160C3B: + case FLASH_28F160C3T: + case FLASH_28F320C3B: + case FLASH_28F320C3T: + case FLASH_28F640C3B: + case FLASH_28F640C3T: + *addr = (FPW) INTEL_RESET; /* make sure in read mode */ + *addr = (FPW) INTEL_LOCKBIT; /* lock command setup */ + + if (prot) + *addr = (FPW) INTEL_PROTECT; /* lock sector */ + else + *addr = (FPW) INTEL_CONFIRM; /* unlock sector */ + + /* now see if it really is locked/unlocked as requested */ + *addr = (FPW) INTEL_READID; + + /* read sector protection at sector address, (A7 .. A0) = 0x02. + * D0 = 1 for each device if protected. + * If at least one device is protected the sector is marked + * protected, but return failure. Mixed protected and + * unprotected devices within a sector should never happen. + */ + value = addr[2] & (FPW) INTEL_PROTECT; + if (value == 0) + info->protect[sector] = 0; + else if (value == (FPW) INTEL_PROTECT) + info->protect[sector] = 1; + else { + /* error, mixed protected and unprotected */ + rcode = 1; + info->protect[sector] = 1; + } + if (info->protect[sector] != prot) + rcode = 1; /* failed to protect/unprotect as requested */ + + /* reload all protection bits from hardware for now */ + flash_sync_real_protect(info); + break; + + default: + /* no hardware protect that we support */ + info->protect[sector] = prot; + break; + } + + return rcode; +} +#endif +#endif diff --git a/board/freescale/m54455evb/m54455evb.c b/board/freescale/m54455evb/m54455evb.c new file mode 100644 index 00000000000..1411a1a4c2d --- /dev/null +++ b/board/freescale/m54455evb/m54455evb.c @@ -0,0 +1,165 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +int checkboard(void) +{ + puts("Board: "); + puts("Freescale M54455 EVB\n"); + return 0; +}; + +long int initdram(int board_type) +{ + volatile sdramc_t *sdram = (volatile sdramc_t *)(MMAP_SDRAM); + volatile gpio_t *gpio = (volatile gpio_t *)(MMAP_GPIO); + u32 dramsize, i; + + dramsize = CFG_SDRAM_SIZE * 0x100000 >> 1; + + for (i = 0x13; i < 0x20; i++) { + if (dramsize == (1 << i)) + break; + } + i--; + + gpio->mscr_sdram = 0xAA; + + sdram->sdcs0 = (CFG_SDRAM_BASE | i); + sdram->sdcs1 = (CFG_SDRAM_BASE1 | i); + + sdram->sdcfg1 = CFG_SDRAM_CFG1; + sdram->sdcfg2 = CFG_SDRAM_CFG2; + + /* Issue PALL */ + sdram->sdcr = CFG_SDRAM_CTRL | 2; + + /* Issue LEMR */ + sdram->sdmr = CFG_SDRAM_EMOD | 0x408; + sdram->sdmr = CFG_SDRAM_MODE | 0x300; + + udelay(500); + + /* Issue PALL */ + sdram->sdcr = CFG_SDRAM_CTRL | 2; + + /* Perform two refresh cycles */ + sdram->sdcr = CFG_SDRAM_CTRL | 4; + sdram->sdcr = CFG_SDRAM_CTRL | 4; + + sdram->sdmr = CFG_SDRAM_MODE | 0x200; + + sdram->sdcr = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000c00; + + udelay(100); + + return (dramsize << 1); +}; + +int testdram(void) +{ + /* TODO: XXX XXX XXX */ + printf("DRAM test not implemented!\n"); + + return (0); +} + +#if defined(CONFIG_CMD_IDE) +#include + +int ide_preinit(void) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + gpio->par_fec |= (gpio->par_fec & GPIO_PAR_FEC_FEC1_MASK) | 0x10; + gpio->par_feci2c |= + (gpio->par_feci2c & 0xF0FF) | (GPIO_PAR_FECI2C_MDC1_ATA_DIOR | + GPIO_PAR_FECI2C_MDIO1_ATA_DIOW); + gpio->par_ata |= + (GPIO_PAR_ATA_BUFEN | GPIO_PAR_ATA_CS1 | GPIO_PAR_ATA_CS0 | + GPIO_PAR_ATA_DA2 | GPIO_PAR_ATA_DA1 | GPIO_PAR_ATA_DA0 + | GPIO_PAR_ATA_RESET_RESET | GPIO_PAR_ATA_DMARQ_DMARQ | + GPIO_PAR_ATA_IORDY_IORDY); + gpio->par_pci |= + (GPIO_PAR_PCI_GNT3_ATA_DMACK | GPIO_PAR_PCI_REQ3_ATA_INTRQ); + + return (0); +} + +void ide_set_reset(int idereset) +{ + volatile atac_t *ata = (atac_t *) MMAP_ATA; + long period; + /* t1, t2, t3, t4, t5, t6, t9, tRD, tA */ + int piotms[5][9] = { + {70, 165, 60, 30, 50, 5, 20, 0, 35}, /* PIO 0 */ + {50, 125, 45, 20, 35, 5, 15, 0, 35}, /* PIO 1 */ + {30, 100, 30, 15, 20, 5, 10, 0, 35}, /* PIO 2 */ + {30, 80, 30, 10, 20, 5, 10, 0, 35}, /* PIO 3 */ + {25, 70, 20, 10, 20, 5, 10, 0, 35} + }; /* PIO 4 */ + + if (idereset) { + ata->cr = 0; /* control reset */ + udelay(10000); + } else { +#define CALC_TIMING(t) (t + period - 1) / period + period = 1000000000 / gd->bus_clk; /* period in ns */ + + /*ata->ton = CALC_TIMING (180); */ + ata->t1 = CALC_TIMING(piotms[2][0]); + ata->t2w = CALC_TIMING(piotms[2][1]); + ata->t2r = CALC_TIMING(piotms[2][1]); + ata->ta = CALC_TIMING(piotms[2][8]); + ata->trd = CALC_TIMING(piotms[2][7]); + ata->t4 = CALC_TIMING(piotms[2][3]); + ata->t9 = CALC_TIMING(piotms[2][6]); + + ata->cr = 0x40; /* IORDY enable */ + udelay(200000); + ata->cr |= 0x01; /* IORDY enable */ + } +} +#endif + +#if defined(CONFIG_PCI) +/* + * Initialize PCI devices, report devices found. + */ +static struct pci_controller hose; +extern void pci_mcf5445x_init(struct pci_controller *hose); + +void pci_init_board(void) +{ + pci_mcf5445x_init(&hose); +} +#endif /* CONFIG_PCI */ + diff --git a/board/freescale/m54455evb/mii.c b/board/freescale/m54455evb/mii.c new file mode 100644 index 00000000000..c067183aadf --- /dev/null +++ b/board/freescale/m54455evb/mii.c @@ -0,0 +1,320 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) +#undef MII_DEBUG +#undef ET_DEBUG + +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + struct fec_info_s *info = (struct fec_info_s *)dev->priv; + + if (setclear) { + gpio->par_feci2c |= + (GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0); + + if (info->iobase == CFG_FEC0_IOBASE) + gpio->par_fec |= GPIO_PAR_FEC_FEC0_RMII_GPIO; + else + gpio->par_fec |= GPIO_PAR_FEC_FEC1_RMII_ATA; + } else { + gpio->par_feci2c &= + ~(GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0); + + if (info->iobase == CFG_FEC0_IOBASE) + gpio->par_fec &= GPIO_PAR_FEC_FEC0_MASK; + else + gpio->par_fec &= GPIO_PAR_FEC_FEC1_MASK; + } + return 0; +} + +#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) +#include + +/* Make MII read/write commands for the FEC. */ +#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) + +#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) + +/* PHY identification */ +#define PHY_ID_LXT970 0x78100000 /* LXT970 */ +#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ +#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ +#define PHY_ID_QS6612 0x01814400 /* QS6612 */ +#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ +#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ +#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ +#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ +#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ + +#define STR_ID_LXT970 "LXT970" +#define STR_ID_LXT971 "LXT971" +#define STR_ID_82555 "Intel82555" +#define STR_ID_QS6612 "QS6612" +#define STR_ID_AMD79C784 "AMD79C784" +#define STR_ID_LSI80225 "LSI80225" +#define STR_ID_LSI80225B "LSI80225/B" +#define STR_ID_DP83848VV "N83848" +#define STR_ID_DP83849 "N83849" + +/**************************************************************************** + * mii_init -- Initialize the MII for MII command without ethernet + * This function is a subset of eth_init + **************************************************************************** + */ +void mii_reset(struct fec_info_s *info) +{ + volatile fec_t *fecp = (fec_t *) (info->miibase); + struct eth_device *dev; + int i, miispd; + u16 rst = 0; + + dev = eth_get_dev(); + + miispd = (gd->bus_clk / 1000000) / 5; + fecp->mscr = miispd << 1; + + miiphy_write(dev->name, info->phy_addr, PHY_BMCR, PHY_BMCR_RESET); + for (i = 0; i < FEC_RESET_DELAY; ++i) { + udelay(500); + miiphy_read(dev->name, info->phy_addr, PHY_BMCR, &rst); + if ((rst & PHY_BMCR_RESET) == 0) + break; + } + if (i == FEC_RESET_DELAY) + printf("Mii reset timeout %d\n", i); +} + +/* send command to phy using mii, wait for result */ +uint mii_send(uint mii_cmd) +{ + struct fec_info_s *info; + struct eth_device *dev; + volatile fec_t *ep; + uint mii_reply; + int j = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + ep = (fec_t *) info->miibase; + + ep->mmfr = mii_cmd; /* command to phy */ + + /* wait for mii complete */ + while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { + udelay(1); + j++; + } + if (j >= MCFFEC_TOUT_LOOP) { + printf("MII not complete\n"); + return -1; + } + + mii_reply = ep->mmfr; /* result from phy */ + ep->eir = FEC_EIR_MII; /* clear MII complete */ +#ifdef ET_DEBUG + printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", + __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); +#endif + + return (mii_reply & 0xffff); /* data read from phy */ +} +#endif /* CFG_DISCOVER_PHY || (CONFIG_MII) */ + +#if defined(CFG_DISCOVER_PHY) +int mii_discover_phy(struct eth_device *dev) +{ +#define MAX_PHY_PASSES 11 + struct fec_info_s *info = dev->priv; + int phyaddr, pass; + uint phyno, phytype; + + if (info->phyname_init) + return info->phy_addr; + + phyaddr = -1; /* didn't find a PHY yet */ + for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { + if (pass > 1) { + /* PHY may need more time to recover from reset. + * The LXT970 needs 50ms typical, no maximum is + * specified, so wait 10ms before try again. + * With 11 passes this gives it 100ms to wake up. + */ + udelay(10000); /* wait 10ms */ + } + + for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { + + phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); +#ifdef ET_DEBUG + printf("PHY type 0x%x pass %d type\n", phytype, pass); +#endif + if (phytype != 0xffff) { + phyaddr = phyno; + phytype <<= 16; + phytype |= + mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); + + switch (phytype & 0xffffffff) { + case PHY_ID_DP83848VV: + strcpy(info->phy_name, + STR_ID_DP83848VV); + info->phyname_init = 1; + break; + default: + strcpy(info->phy_name, "unknown"); + info->phyname_init = 1; + break; + } + +#ifdef ET_DEBUG + printf("PHY @ 0x%x pass %d type ", phyno, pass); + switch (phytype & 0xffffffff) { + case PHY_ID_DP83848VV: + printf(STR_ID_DP83848VV); + break; + default: + printf("0x%08x\n", phytype); + break; + } +#endif + } + } + } + if (phyaddr < 0) + printf("No PHY device found.\n"); + + return phyaddr; +} +#endif /* CFG_DISCOVER_PHY */ + +int mii_init(void) __attribute__((weak,alias("__mii_init"))); + +void __mii_init(void) +{ + volatile fec_t *fecp; + struct fec_info_s *info; + struct eth_device *dev; + int miispd = 0, i = 0; + u16 autoneg = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + fecp = (fec_t *) info->miibase; + + /* We use strictly polling mode only */ + fecp->eimr = 0; + + /* Clear any pending interrupt */ + fecp->eir = 0xffffffff; + + /* Set MII speed */ + miispd = (gd->bus_clk / 1000000) / 5; + fecp->mscr = miispd << 1; + + info->phy_addr = mii_discover_phy(dev); + +#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) + while (i < MCFFEC_TOUT_LOOP) { + autoneg = 0; + miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); + i++; + + if ((autoneg & AUTONEGLINK) == AUTONEGLINK) + break; + + udelay(500); + } + if (i >= MCFFEC_TOUT_LOOP) { + printf("Auto Negotiation not complete\n"); + } + + /* adapt to the half/full speed settings */ + info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; + info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); +} + +/***************************************************************************** + * Read and write a MII PHY register, routines used by MII Utilities + * + * FIXME: These routines are expected to return 0 on success, but mii_send + * does _not_ return an error code. Maybe 0xFFFF means error, i.e. + * no PHY connected... + * For now always return 0. + * FIXME: These routines only work after calling eth_init() at least once! + * Otherwise they hang in mii_send() !!! Sorry! + *****************************************************************************/ + +int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, + unsigned short *value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); +#endif + rdreg = mii_send(mk_mii_read(addr, reg)); + + *value = rdreg; + +#ifdef MII_DEBUG + printf("0x%04x\n", *value); +#endif + + return 0; +} + +int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, + unsigned short value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); +#endif + + rdreg = mii_send(mk_mii_write(addr, reg, value)); + +#ifdef MII_DEBUG + printf("0x%04x\n", value); +#endif + + return 0; +} + +#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m54455evb/u-boot.lds b/board/freescale/m54455evb/u-boot.lds new file mode 100644 index 00000000000..bda68e4f824 --- /dev/null +++ b/board/freescale/m54455evb/u-boot.lds @@ -0,0 +1,144 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mcf5445x/start.o (.text) + lib_m68k/traps.o (.text) + lib_m68k/interrupts.o (.text) + common/dlmalloc.o (.text) + lib_generic/zlib.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + __got_start = .; + *(.got) + __got_end = .; + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + _sbss = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + _end = . ; + PROVIDE (end = .); +} diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index 889cff8411f..7686080f351 100644 --- a/common/cmd_bdinfo.c +++ b/common/cmd_bdinfo.c @@ -208,24 +208,36 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } #elif defined(CONFIG_M68K) /* M68K */ +static void print_str(const char *, const char *); int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { int i; bd_t *bd = gd->bd; + char buf[32]; + print_num ("memstart", (ulong)bd->bi_memstart); print_num ("memsize", (ulong)bd->bi_memsize); print_num ("flashstart", (ulong)bd->bi_flashstart); print_num ("flashsize", (ulong)bd->bi_flashsize); print_num ("flashoffset", (ulong)bd->bi_flashoffset); #if defined(CFG_INIT_RAM_ADDR) - print_num ("sramstart", (ulong)bd->bi_sramstart); - print_num ("sramsize", (ulong)bd->bi_sramsize); + print_num ("sramstart", (ulong)bd->bi_sramstart); + print_num ("sramsize", (ulong)bd->bi_sramsize); #endif #if defined(CFG_MBAR) - print_num ("mbar", bd->bi_mbar_base ); + print_num ("mbar", bd->bi_mbar_base); #endif -#if defined(CONFIG_CMD_NET) + print_str ("busfreq", strmhz(buf, bd->bi_busfreq)); +#ifdef CONFIG_PCI + print_str ("pcifreq", strmhz(buf, bd->bi_pcifreq)); +#endif +#ifdef CONFIG_EXTRA_CLOCK + print_str ("flbfreq", strmhz(buf, bd->bi_flbfreq)); + print_str ("inpfreq", strmhz(buf, bd->bi_inpfreq)); + print_str ("vcofreq", strmhz(buf, bd->bi_vcofreq)); +#endif +#if defined(CFG_CMD_NET) puts ("ethaddr ="); for (i=0; i<6; ++i) { printf ("%c%02X", i ? ':' : ' ', bd->bi_enetaddr[i]); @@ -323,7 +335,7 @@ static void print_num(const char *name, ulong value) printf ("%-12s= 0x%08lX\n", name, value); } -#ifdef CONFIG_PPC +#if defined(CONFIG_PPC) || defined(CONFIG_M68K) static void print_str(const char *name, const char *str) { printf ("%-12s= %6s MHz\n", name, str); diff --git a/cpu/mcf5445x/Makefile b/cpu/mcf5445x/Makefile new file mode 100644 index 00000000000..26ec29895ee --- /dev/null +++ b/cpu/mcf5445x/Makefile @@ -0,0 +1,48 @@ +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +# CFLAGS += -DET_DEBUG + +LIB = lib$(CPU).a + +START = start.o +COBJS = cpu.o speed.o cpu_init.o interrupts.o pci.o + +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/cpu/mcf5445x/config.mk b/cpu/mcf5445x/config.mk new file mode 100644 index 00000000000..d0c72fb6b0e --- /dev/null +++ b/cpu/mcf5445x/config.mk @@ -0,0 +1,27 @@ +# +# (C) Copyright 2003 Josef Baumgartner +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +PLATFORM_RELFLAGS += -ffixed-d7 -msep-data +PLATFORM_CPPFLAGS += -m5407 -fPIC diff --git a/cpu/mcf5445x/cpu.c b/cpu/mcf5445x/cpu.c new file mode 100644 index 00000000000..e601b8949b6 --- /dev/null +++ b/cpu/mcf5445x/cpu.c @@ -0,0 +1,97 @@ +/* + * + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include + +DECLARE_GLOBAL_DATA_PTR; + +int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[]) +{ + volatile rcm_t *rcm = (rcm_t *) (MMAP_RCM); + udelay(1000); + rcm->rcr |= RCM_RCR_SOFTRST; + + /* we don't return! */ + return 0; +}; + +int checkcpu(void) +{ + volatile ccm_t *ccm = (ccm_t *) MMAP_CCM; + u16 msk; + u16 id = 0; + u8 ver; + + puts("CPU: "); + msk = (ccm->cir >> 6); + ver = (ccm->cir & 0x003f); + switch (msk) { + case 0x48: + id = 54455; + break; + case 0x49: + id = 54454; + break; + case 0x4a: + id = 54453; + break; + case 0x4b: + id = 54452; + break; + case 0x4d: + id = 54451; + break; + case 0x4f: + id = 54450; + break; + } + + if (id) { + printf("Freescale MCF%d (Mask:%01x Version:%x)\n", id, msk, + ver); + printf(" CPU CLK %d Mhz BUS CLK %d Mhz FLB CLK %d Mhz\n", + (int)(gd->cpu_clk / 1000000), + (int)(gd->bus_clk / 1000000), + (int)(gd->flb_clk / 1000000)); +#ifdef CONFIG_PCI + printf(" PCI CLK %d Mhz INP CLK %d Mhz VCO CLK %d Mhz\n", + (int)(gd->pci_clk / 1000000), + (int)(gd->inp_clk / 1000000), + (int)(gd->vco_clk / 1000000)); +#else + printf(" INP CLK %d Mhz VCO CLK %d Mhz\n", + (int)(gd->inp_clk / 1000000), + (int)(gd->vco_clk / 1000000)); +#endif + } + + return 0; +} diff --git a/cpu/mcf5445x/cpu_init.c b/cpu/mcf5445x/cpu_init.c new file mode 100644 index 00000000000..6622eeea981 --- /dev/null +++ b/cpu/mcf5445x/cpu_init.c @@ -0,0 +1,140 @@ +/* + * + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#include +#include + +/* + * Breath some life into the CPU... + * + * Set up the memory map, + * initialize a bunch of registers, + * initialize the UPM's + */ +void cpu_init_f(void) +{ + volatile scm1_t *scm1 = (scm1_t *) MMAP_SCM1; + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; + + scm1->mpr = 0x77777777; + scm1->pacra = 0; + scm1->pacrb = 0; + scm1->pacrc = 0; + scm1->pacrd = 0; + scm1->pacre = 0; + scm1->pacrf = 0; + scm1->pacrg = 0; + + /* FlexBus */ + gpio->par_be = + GPIO_PAR_BE_BE3_BE3 | GPIO_PAR_BE_BE2_BE2 | GPIO_PAR_BE_BE1_BE1 | + GPIO_PAR_BE_BE0_BE0; + gpio->par_fbctl = + GPIO_PAR_FBCTL_OE | GPIO_PAR_FBCTL_TA_TA | GPIO_PAR_FBCTL_RW_RW | + GPIO_PAR_FBCTL_TS_TS; + +#if (defined(CFG_CS0_BASE) && defined(CFG_CS0_MASK) && defined(CFG_CS0_CTRL)) + fbcs->csar0 = CFG_CS0_BASE; + fbcs->cscr0 = CFG_CS0_CTRL; + fbcs->csmr0 = CFG_CS0_MASK; +#endif + +#if (defined(CFG_CS1_BASE) && defined(CFG_CS1_MASK) && defined(CFG_CS1_CTRL)) + /* Latch chipselect */ + fbcs->csar1 = CFG_CS1_BASE; + fbcs->cscr1 = CFG_CS1_CTRL; + fbcs->csmr1 = CFG_CS1_MASK; +#endif + +#if (defined(CFG_CS2_BASE) && defined(CFG_CS2_MASK) && defined(CFG_CS2_CTRL)) + fbcs->csar2 = CFG_CS2_BASE; + fbcs->cscr2 = CFG_CS2_CTRL; + fbcs->csmr2 = CFG_CS2_MASK; +#endif + +#if (defined(CFG_CS3_BASE) && defined(CFG_CS3_MASK) && defined(CFG_CS3_CTRL)) + fbcs->csar3 = CFG_CS3_BASE; + fbcs->cscr3 = CFG_CS3_CTRL; + fbcs->csmr3 = CFG_CS3_MASK; +#endif + +#if (defined(CFG_CS4_BASE) && defined(CFG_CS4_MASK) && defined(CFG_CS4_CTRL)) + fbcs->csar4 = CFG_CS4_BASE; + fbcs->cscr4 = CFG_CS4_CTRL; + fbcs->csmr4 = CFG_CS4_MASK; +#endif + +#if (defined(CFG_CS5_BASE) && defined(CFG_CS5_MASK) && defined(CFG_CS5_CTRL)) + fbcs->csar5 = CFG_CS5_BASE; + fbcs->cscr5 = CFG_CS5_CTRL; + fbcs->csmr5 = CFG_CS5_MASK; +#endif + +#ifdef CONFIG_FSL_I2C + gpio->par_feci2c = GPIO_PAR_FECI2C_SCL_SCL | GPIO_PAR_FECI2C_SDA_SDA; +#endif + + icache_enable(); +} + +/* + * initialize higher level parts of CPU like timers + */ +int cpu_init_r(void) +{ +#ifdef CONFIG_MCFTMR + volatile rtc_t *rtc = (volatile rtc_t *)(CFG_MCFRTC_BASE); + volatile rtcex_t *rtcex = (volatile rtcex_t *)&rtc->extended; + u32 oscillator = CFG_RTC_OSCILLATOR; + + rtcex->gocu = (CFG_RTC_OSCILLATOR >> 16) & 0xFFFF; + rtcex->gocl = CFG_RTC_OSCILLATOR & 0xFFFF; +#endif + + return (0); +} + +void uart_port_conf(void) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + /* Setup Ports: */ + switch (CFG_UART_PORT) { + case 0: + gpio->par_uart = + (GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD); + break; + case 1: + gpio->par_uart = + (GPIO_PAR_UART_U1TXD_U1TXD | GPIO_PAR_UART_U1RXD_U1RXD); + break; + } +} diff --git a/cpu/mcf5445x/interrupts.c b/cpu/mcf5445x/interrupts.c new file mode 100644 index 00000000000..9572a7bc32b --- /dev/null +++ b/cpu/mcf5445x/interrupts.c @@ -0,0 +1,52 @@ +/* + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* CPU specific interrupt routine */ +#include +#include + +int interrupt_init(void) +{ + volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE); + + /* Make sure all interrupts are disabled */ + intp->imrh0 |= 0xFFFFFFFF; + intp->imrl0 |= 0xFFFFFFFF; + + enable_interrupts(); + return 0; +} + +#if defined(CONFIG_MCFTMR) +void dtimer_intr_setup(void) +{ + volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE); + + intp->icr0[CFG_TMRINTR_NO] = CFG_TMRINTR_PRI; + intp->imrh0 &= ~CFG_TMRINTR_MASK; +} +#endif diff --git a/cpu/mcf5445x/pci.c b/cpu/mcf5445x/pci.c new file mode 100644 index 00000000000..8ace53630f8 --- /dev/null +++ b/cpu/mcf5445x/pci.c @@ -0,0 +1,189 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * PCI Configuration space access support + */ +#include +#include +#include +#include + +#if defined(CONFIG_PCI) +/* System RAM mapped over PCI */ +#define CFG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE +#define CFG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE +#define CFG_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024) + +#define cfg_read(val, addr, type, op) *val = op((type)(addr)); +#define cfg_write(val, addr, type, op) op((type *)(addr), (val)); + +#define PCI_OP(rw, size, type, op, mask) \ +int pci_##rw##_cfg_##size(struct pci_controller *hose, \ + pci_dev_t dev, int offset, type val) \ +{ \ + u32 addr = 0; \ + u16 cfg_type = 0; \ + addr = ((offset & 0xfc) | cfg_type | (dev) | 0x80000000); \ + out_be32(hose->cfg_addr, addr); \ + __asm__ __volatile__("nop"); \ + cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \ + out_be32(hose->cfg_addr, addr & 0x7fffffff); \ + __asm__ __volatile__("nop"); \ + return 0; \ +} + +PCI_OP(read, byte, u8 *, in_8, 3) +PCI_OP(read, word, u16 *, in_le16, 2) +PCI_OP(write, byte, u8, out_8, 3) +PCI_OP(write, word, u16, out_le16, 2) +PCI_OP(write, dword, u32, out_le32, 0) + +int pci_read_cfg_dword(struct pci_controller *hose, pci_dev_t dev, + int offset, u32 * val) +{ + u32 addr; + u32 tmpv; + u32 mask = 2; /* word access */ + /* Read lower 16 bits */ + addr = ((offset & 0xfc) | (dev) | 0x80000000); + out_be32(hose->cfg_addr, addr); + __asm__ __volatile__("nop"); + *val = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask))); + out_be32(hose->cfg_addr, addr & 0x7fffffff); + __asm__ __volatile__("nop"); + + /* Read upper 16 bits */ + offset += 2; + addr = ((offset & 0xfc) | 1 | (dev) | 0x80000000); + out_be32(hose->cfg_addr, addr); + __asm__ __volatile__("nop"); + tmpv = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask))); + out_be32(hose->cfg_addr, addr & 0x7fffffff); + __asm__ __volatile__("nop"); + + /* combine results into dword value */ + *val = (tmpv << 16) | *val; + + return 0; +} + +void pci_mcf5445x_init(struct pci_controller *hose) +{ + volatile pci_t *pci = (volatile pci_t *)MMAP_PCI; + volatile pciarb_t *pciarb = (volatile pciarb_t *)MMAP_PCIARB; + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + u32 barEn = 0; + + pciarb->acr = 0x001f001f; + + /* Set PCIGNT1, PCIREQ1, PCIREQ0/PCIGNTIN, PCIGNT0/PCIREQOUT, + PCIREQ2, PCIGNT2 */ + gpio->par_pci = + GPIO_PAR_PCI_GNT3_GNT3 | GPIO_PAR_PCI_GNT2 | GPIO_PAR_PCI_GNT1 | + GPIO_PAR_PCI_GNT0 | GPIO_PAR_PCI_REQ3_REQ3 | GPIO_PAR_PCI_REQ2 | + GPIO_PAR_PCI_REQ1 | GPIO_PAR_PCI_REQ0; + + pci->tcr1 |= PCI_TCR1_P; + + /* Initiator windows */ + pci->iw0btar = CFG_PCI_MEM_PHYS; + pci->iw1btar = CFG_PCI_IO_PHYS; + pci->iw2btar = CFG_PCI_CFG_PHYS; + + pci->iwcr = + PCI_IWCR_W0C_EN | PCI_IWCR_W1C_EN | PCI_IWCR_W1C_IO | + PCI_IWCR_W2C_EN | PCI_IWCR_W2C_IO; + + /* Enable bus master and mem access */ + pci->scr = PCI_SCR_MW | PCI_SCR_B | PCI_SCR_M; + + /* Cache line size and master latency */ + pci->cr1 = PCI_CR1_CLS(8) | PCI_CR1_LTMR(0xFF); + pci->cr2 = 0; + +#ifdef CFG_PCI_BAR0 + pci->bar0 = PCI_BAR_BAR0(CFG_PCI_BAR0); + pci->tbatr0 = CFG_PCI_TBATR0 | PCI_TBATR_EN; + barEn |= PCI_TCR1_B0E; +#endif +#ifdef CFG_PCI_BAR1 + pci->bar1 = PCI_BAR_BAR1(CFG_PCI_BAR1); + pci->tbatr1 = CFG_PCI_TBATR1 | PCI_TBATR_EN; + barEn |= PCI_TCR1_B1E; +#endif +#ifdef CFG_PCI_BAR2 + pci->bar2 = PCI_BAR_BAR2(CFG_PCI_BAR2); + pci->tbatr2 = CFG_PCI_TBATR2 | PCI_TBATR_EN; + barEn |= PCI_TCR1_B2E; +#endif +#ifdef CFG_PCI_BAR3 + pci->bar3 = PCI_BAR_BAR3(CFG_PCI_BAR3); + pci->tbatr3 = CFG_PCI_TBATR3 | PCI_TBATR_EN; + barEn |= PCI_TCR1_B3E; +#endif +#ifdef CFG_PCI_BAR4 + pci->bar4 = PCI_BAR_BAR4(CFG_PCI_BAR4); + pci->tbatr4 = CFG_PCI_TBATR4 | PCI_TBATR_EN; + barEn |= PCI_TCR1_B4E; +#endif +#ifdef CFG_PCI_BAR5 + pci->bar5 = PCI_BAR_BAR5(CFG_PCI_BAR5); + pci->tbatr5 = CFG_PCI_TBATR5 | PCI_TBATR_EN; + barEn |= PCI_TCR1_B5E; +#endif + + pci->tcr2 = barEn; + + /* Deassert reset bit */ + pci->gscr &= ~PCI_GSCR_PR; + udelay(1000); + + /* Enable PCI bus master support */ + hose->first_busno = 0; + hose->last_busno = 0xff; + + pci_set_region(hose->regions + 0, CFG_PCI_MEM_BUS, CFG_PCI_MEM_PHYS, + CFG_PCI_MEM_SIZE, PCI_REGION_MEM); + + pci_set_region(hose->regions + 1, CFG_PCI_IO_BUS, CFG_PCI_IO_PHYS, + CFG_PCI_IO_SIZE, PCI_REGION_IO); + + pci_set_region(hose->regions + 2, CFG_PCI_SYS_MEM_BUS, + CFG_PCI_SYS_MEM_PHYS, CFG_PCI_SYS_MEM_SIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + hose->region_count = 3; + + hose->cfg_addr = &(pci->car); + hose->cfg_data = (volatile unsigned char *)CFG_PCI_CFG_BUS; + + pci_set_ops(hose, pci_read_cfg_byte, pci_read_cfg_word, + pci_read_cfg_dword, pci_write_cfg_byte, pci_write_cfg_word, + pci_write_cfg_dword); + + /* Hose scan */ + pci_register_hose(hose); + hose->last_busno = pci_hose_scan(hose); +} +#endif /* CONFIG_PCI */ diff --git a/cpu/mcf5445x/speed.c b/cpu/mcf5445x/speed.c new file mode 100644 index 00000000000..967becfdd07 --- /dev/null +++ b/cpu/mcf5445x/speed.c @@ -0,0 +1,186 @@ +/* + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#include + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Low Power Divider specifications + */ +#define CLOCK_LPD_MIN (1 << 0) /* Divider (decoded) */ +#define CLOCK_LPD_MAX (1 << 15) /* Divider (decoded) */ + +#define CLOCK_PLL_FVCO_MAX 540000000 +#define CLOCK_PLL_FVCO_MIN 300000000 + +#define CLOCK_PLL_FSYS_MAX 266666666 +#define CLOCK_PLL_FSYS_MIN 100000000 +#define MHZ 1000000 + +void clock_enter_limp(int lpdiv) +{ + volatile ccm_t *ccm = (volatile ccm_t *)MMAP_CCM; + int i, j; + + /* Check bounds of divider */ + if (lpdiv < CLOCK_LPD_MIN) + lpdiv = CLOCK_LPD_MIN; + if (lpdiv > CLOCK_LPD_MAX) + lpdiv = CLOCK_LPD_MAX; + + /* Round divider down to nearest power of two */ + for (i = 0, j = lpdiv; j != 1; j >>= 1, i++) ; + + /* Apply the divider to the system clock */ + ccm->cdr = (ccm->cdr & 0xF0FF) | CCM_CDR_LPDIV(i); + + /* Enable Limp Mode */ + ccm->misccr |= CCM_MISCCR_LIMP; +} + +/* + * brief Exit Limp mode + * warning The PLL should be set and locked prior to exiting Limp mode + */ +void clock_exit_limp(void) +{ + volatile ccm_t *ccm = (volatile ccm_t *)MMAP_CCM; + volatile pll_t *pll = (volatile pll_t *)MMAP_PLL; + + /* Exit Limp mode */ + ccm->misccr &= ~CCM_MISCCR_LIMP; + + /* Wait for the PLL to lock */ + while (!(pll->psr & PLL_PSR_LOCK)) ; +} + +/* + * get_clocks() fills in gd->cpu_clock and gd->bus_clk + */ +int get_clocks(void) +{ + volatile ccm_t *ccm = (volatile ccm_t *)MMAP_CCM; + volatile pll_t *pll = (volatile pll_t *)MMAP_PLL; + volatile u8 *cpld = (volatile u8 *)(CFG_CS2_BASE + 3); + volatile u8 *fpga = (volatile u8 *)(CFG_CS3_BASE + 14); + int pllmult_nopci[] = { 20, 10, 24, 18, 12, 6, 16, 8 }; + int pllmult_pci[] = { 12, 6, 16, 8 }; + int vco, bPci, temp, fbtemp, pcrvalue; + int *pPllmult = NULL; + u16 fbpll_mask; + u8 cpldmode; + + /* To determine PCI is present or not */ + if (((ccm->ccr & CCM_CCR_360_FBCONFIG_MASK) == 0x00e0) || + ((ccm->ccr & CCM_CCR_360_FBCONFIG_MASK) == 0x0060)) { + pPllmult = &pllmult_pci[0]; + fbpll_mask = 3; + bPci = 1; + } else { + pPllmult = &pllmult_nopci[0]; + fbpll_mask = 7; +#ifdef CONFIG_PCI + gd->pci_clk = 0; +#endif + bPci = 0; + } + +#ifdef CONFIG_M54455EVB + /* Temporary place here, belongs in board/freescale/... */ + /* Temporary read from CCR- fixed fb issue, must be the same clock + as pci or input clock, causing cpld/fpga read inconsistancy */ + fbtemp = pPllmult[ccm->ccr & fbpll_mask]; + + /* Break down into small pieces, code still in flex bus */ + pcrvalue = pll->pcr & 0xFFFFF0FF; + temp = fbtemp - 1; + pcrvalue |= PLL_PCR_OUTDIV3(temp); + + pll->pcr = pcrvalue; + + cpldmode = *cpld & 0x03; + if (cpldmode == 0) { + /* RCON mode */ + vco = pPllmult[ccm->rcon & fbpll_mask] * CFG_INPUT_CLKSRC; + + if ((vco < CLOCK_PLL_FVCO_MIN) || (vco > CLOCK_PLL_FVCO_MAX)) { + /* invaild range, re-set in PCR */ + int temp = ((pll->pcr & PLL_PCR_OUTDIV2_MASK) >> 4) + 1; + int i, j, bus; + + j = (pll->pcr & 0xFF000000) >> 24; + for (i = j; i < 0xFF; i++) { + vco = i * CFG_INPUT_CLKSRC; + if (vco >= CLOCK_PLL_FVCO_MIN) { + bus = vco / temp; + if (bus <= CLOCK_PLL_FSYS_MIN - MHZ) + continue; + else + break; + } + } + pcrvalue = pll->pcr & 0x00FF00FF; + fbtemp = ((i - 1) << 8) | ((i - 1) << 12); + pcrvalue |= ((i << 24) | fbtemp); + + pll->pcr = pcrvalue; + } + gd->vco_clk = vco; /* Vco clock */ + } else if (cpldmode == 2) { + /* Normal mode */ + vco = pPllmult[ccm->ccr & fbpll_mask] * CFG_INPUT_CLKSRC; + gd->vco_clk = vco; /* Vco clock */ + } else if (cpldmode == 3) { + /* serial mode */ + } +#endif /* CONFIG_M54455EVB */ + + if ((ccm->ccr & CCM_MISCCR_LIMP) == CCM_MISCCR_LIMP) { + /* Limp mode */ + } else { + gd->inp_clk = CFG_INPUT_CLKSRC; /* Input clock */ + + temp = (pll->pcr & PLL_PCR_OUTDIV1_MASK) + 1; + gd->cpu_clk = vco / temp; /* cpu clock */ + + temp = ((pll->pcr & PLL_PCR_OUTDIV2_MASK) >> 4) + 1; + gd->bus_clk = vco / temp; /* bus clock */ + + temp = ((pll->pcr & PLL_PCR_OUTDIV3_MASK) >> 8) + 1; + gd->flb_clk = vco / temp; /* FlexBus clock */ + +#ifdef CONFIG_PCI + if (bPci) { + temp = ((pll->pcr & PLL_PCR_OUTDIV4_MASK) >> 12) + 1; + gd->pci_clk = vco / temp; /* PCI clock */ + } +#endif + } + + return (0); +} diff --git a/cpu/mcf5445x/start.S b/cpu/mcf5445x/start.S new file mode 100644 index 00000000000..cd989ab6261 --- /dev/null +++ b/cpu/mcf5445x/start.S @@ -0,0 +1,388 @@ +/* + * Copyright (C) 2003 Josef Baumgartner + * Based on code from Bernhard Kuhn + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include "version.h" + +#ifndef CONFIG_IDENT_STRING +#define CONFIG_IDENT_STRING "" +#endif + +/* last three long word reserved for cache status */ +#define CACR_STATUS (CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-12) +#define ICACHE_STATUS (CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END- 8) +#define DCACHE_STATUS (CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END- 4) + +#define _START _start +#define _FAULT _fault + +#define SAVE_ALL \ + move.w #0x2700,%sr; /* disable intrs */ \ + subl #60,%sp; /* space for 15 regs */ \ + moveml %d0-%d7/%a0-%a6,%sp@; + +#define RESTORE_ALL \ + moveml %sp@,%d0-%d7/%a0-%a6; \ + addl #60,%sp; /* space for 15 regs */ \ + rte; + +.text +/* + * Vector table. This is used for initial platform startup. + * These vectors are to catch any un-intended traps. + */ +_vectors: + +INITSP: .long 0x00000000 /* Initial SP */ +INITPC: .long _START /* Initial PC */ +vector02: .long _FAULT /* Access Error */ +vector03: .long _FAULT /* Address Error */ +vector04: .long _FAULT /* Illegal Instruction */ +vector05: .long _FAULT /* Reserved */ +vector06: .long _FAULT /* Reserved */ +vector07: .long _FAULT /* Reserved */ +vector08: .long _FAULT /* Privilege Violation */ +vector09: .long _FAULT /* Trace */ +vector0A: .long _FAULT /* Unimplemented A-Line */ +vector0B: .long _FAULT /* Unimplemented F-Line */ +vector0C: .long _FAULT /* Debug Interrupt */ +vector0D: .long _FAULT /* Reserved */ +vector0E: .long _FAULT /* Format Error */ +vector0F: .long _FAULT /* Unitialized Int. */ + +/* Reserved */ +vector10_17: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +vector18: .long _FAULT /* Spurious Interrupt */ +vector19: .long _FAULT /* Autovector Level 1 */ +vector1A: .long _FAULT /* Autovector Level 2 */ +vector1B: .long _FAULT /* Autovector Level 3 */ +vector1C: .long _FAULT /* Autovector Level 4 */ +vector1D: .long _FAULT /* Autovector Level 5 */ +vector1E: .long _FAULT /* Autovector Level 6 */ +vector1F: .long _FAULT /* Autovector Level 7 */ + +/* TRAP #0 - #15 */ +vector20_2F: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +/* Reserved */ +vector30_3F: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +vector64_127: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +vector128_191: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +vector192_255: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + + .text + + .globl _start +_start: + nop + nop + move.w #0x2700,%sr /* Mask off Interrupt */ + + /* Set vector base register at the beginning of the Flash */ + move.l #CFG_FLASH_BASE, %d0 + movec %d0, %VBR + + move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_RAM_CTRL), %d0 + movec %d0, %RAMBAR0 + + /* initialize general use internal ram */ + move.l #0, %d0 + move.l #(CACR_STATUS), %a1 /* CACR */ + move.l #(ICACHE_STATUS), %a2 /* icache */ + move.l #(DCACHE_STATUS), %a3 /* dcache */ + move.l %d0, (%a1) + move.l %d0, (%a2) + move.l %d0, (%a3) + + /* invalidate and disable cache */ + move.l #0x01004100, %d0 /* Invalidate cache cmd */ + movec %d0, %CACR /* Invalidate cache */ + move.l #0, %d0 + movec %d0, %ACR0 + movec %d0, %ACR1 + movec %d0, %ACR2 + movec %d0, %ACR3 + + /* set stackpointer to end of internal ram to get some stackspace for + the first c-code */ + move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET), %sp + clr.l %sp@- + + move.l #__got_start, %a5 /* put relocation table address to a5 */ + + bsr cpu_init_f /* run low-level CPU init code (from flash) */ + bsr board_init_f /* run low-level board init code (from flash) */ + + /* board_init_f() does not return */ + +/*------------------------------------------------------------------------------*/ + +/* + * void relocate_code (addr_sp, gd, addr_moni) + * + * This "function" does not return, instead it continues in RAM + * after relocating the monitor code. + * + * r3 = dest + * r4 = src + * r5 = length in bytes + * r6 = cachelinesize + */ + .globl relocate_code +relocate_code: + link.w %a6,#0 + move.l 8(%a6), %sp /* set new stack pointer */ + + move.l 12(%a6), %d0 /* Save copy of Global Data pointer */ + move.l 16(%a6), %a0 /* Save copy of Destination Address */ + + move.l #CFG_MONITOR_BASE, %a1 + move.l #__init_end, %a2 + move.l %a0, %a3 + + /* copy the code to RAM */ +1: + move.l (%a1)+, (%a3)+ + cmp.l %a1,%a2 + bgt.s 1b + +/* + * We are done. Do not return, instead branch to second part of board + * initialization, now running from RAM. + */ + move.l %a0, %a1 + add.l #(in_ram - CFG_MONITOR_BASE), %a1 + jmp (%a1) + +in_ram: + +clear_bss: + /* + * Now clear BSS segment + */ + move.l %a0, %a1 + add.l #(_sbss - CFG_MONITOR_BASE),%a1 + move.l %a0, %d1 + add.l #(_ebss - CFG_MONITOR_BASE),%d1 +6: + clr.l (%a1)+ + cmp.l %a1,%d1 + bgt.s 6b + + /* + * fix got table in RAM + */ + move.l %a0, %a1 + add.l #(__got_start - CFG_MONITOR_BASE),%a1 + move.l %a1,%a5 /* * fix got pointer register a5 */ + + move.l %a0, %a2 + add.l #(__got_end - CFG_MONITOR_BASE),%a2 + +7: + move.l (%a1),%d1 + sub.l #_start,%d1 + add.l %a0,%d1 + move.l %d1,(%a1)+ + cmp.l %a2, %a1 + bne 7b + + /* calculate relative jump to board_init_r in ram */ + move.l %a0, %a1 + add.l #(board_init_r - CFG_MONITOR_BASE), %a1 + + /* set parameters for board_init_r */ + move.l %a0,-(%sp) /* dest_addr */ + move.l %d0,-(%sp) /* gd */ + jsr (%a1) + +/*------------------------------------------------------------------------------*/ +/* exception code */ + .globl _fault +_fault: + jmp _fault + .globl _exc_handler + +_exc_handler: + SAVE_ALL + movel %sp,%sp@- + bsr exc_handler + addql #4,%sp + RESTORE_ALL + + .globl _int_handler +_int_handler: + SAVE_ALL + movel %sp,%sp@- + bsr int_handler + addql #4,%sp + RESTORE_ALL + +/*------------------------------------------------------------------------------*/ +/* cache functions */ + .globl icache_enable +icache_enable: + move.l #(CACR_STATUS), %a1 /* read CACR Status */ + move.l (%a1), %d1 + + move.l #0x00040100, %d0 /* Invalidate icache */ + or.l %d1, %d0 + movec %d0, %CACR + + move.l #(CFG_SDRAM_BASE + 0xc000), %d0 /* Setup icache */ + movec %d0, %ACR2 + + or.l #0x00088400, %d1 /* Enable bcache and icache */ + movec %d1, %CACR + + move.l #(ICACHE_STATUS), %a1 + moveq #1, %d0 + move.l %d0, (%a1) + rts + + .globl icache_disable +icache_disable: + move.l #(CACR_STATUS), %a1 /* read CACR Status */ + move.l (%a1), %d0 + + and.l #0xFFF77BFF, %d0 + or.l #0x00040100, %d0 /* Setup cache mask */ + movec %d0, %CACR /* Invalidate icache */ + clr.l %d0 + movec %d0, %ACR2 + movec %d0, %ACR3 + + move.l #(ICACHE_STATUS), %a1 + moveq #0, %d0 + move.l %d0, (%a1) + rts + + .globl icache_status +icache_status: + move.l #(ICACHE_STATUS), %a1 + move.l (%a1), %d0 + rts + + .globl icache_invalid +icache_invalid: + move.l #(CACR_STATUS), %a1 /* read CACR Status */ + move.l (%a1), %d0 + + or.l #0x00040100, %d0 /* Invalidate icache */ + movec %d0, %CACR /* Enable and invalidate cache */ + rts + + .globl dcache_enable +dcache_enable: + move.l #(CACR_STATUS), %a1 /* read CACR Status */ + move.l (%a1), %d1 + + move.l #0x01000000, %d0 + or.l %d1, %d0 + movec %d0, %CACR /* Invalidate dcache */ + + move.l #(CFG_SDRAM_BASE + 0xc000), %d0 + movec %d0, %ACR0 + move.l #0, %d0 + movec %d0, %ACR1 + + or.l #0x80000000, %d1 /* Enable bcache and icache */ + movec %d1, %CACR + + move.l #(DCACHE_STATUS), %a1 + moveq #1, %d0 + move.l %d0, (%a1) + rts + + .globl dcache_disable +dcache_disable: + move.l #(CACR_STATUS), %a1 /* read CACR Status */ + move.l (%a1), %d0 + + and.l #0x7FFFFFFF, %d0 + or.l #0x01000000, %d0 /* Setup cache mask */ + movec %d0, %CACR /* Disable dcache */ + clr.l %d0 + movec %d0, %ACR0 + movec %d0, %ACR1 + + move.l #(DCACHE_STATUS), %a1 + moveq #0, %d0 + move.l %d0, (%a1) + rts + + .globl dcache_invalid +dcache_invalid: + move.l #(CACR_STATUS), %a1 /* read CACR Status */ + move.l (%a1), %d0 + + or.l #0x01000000, %d0 /* Setup cache mask */ + movec %d0, %CACR /* Enable and invalidate cache */ + rts + + .globl dcache_status +dcache_status: + move.l #(DCACHE_STATUS), %a1 + move.l (%a1), %d0 + rts + +/*------------------------------------------------------------------------------*/ + + .globl version_string +version_string: + .ascii U_BOOT_VERSION + .ascii " (", __DATE__, " - ", __TIME__, ")" + .ascii CONFIG_IDENT_STRING, "\0" diff --git a/doc/README.m54455evb b/doc/README.m54455evb new file mode 100644 index 00000000000..c768fc8a409 --- /dev/null +++ b/doc/README.m54455evb @@ -0,0 +1,416 @@ +Freescale MCF54455EVB ColdFire Development Board +================================================ + +TsiChung Liew(Tsi-Chung.Liew@freescale.com) +Created 4/08/07 +=========================================== + + +Changed files: +============== + +- board/freescale/m54455evb/m54455evb.c Dram setup, IDE pre init, and PCI init +- board/freescale/m54455evb/flash.c Atmel and INTEL flash support +- board/freescale/m54455evb/Makefile Makefile +- board/freescale/m54455evb/config.mk config make +- board/freescale/m54455evb/u-boot.lds Linker description + +- common/cmd_bdinfo.c Clock frequencies output +- common/cmd_mii.c mii support + +- cpu/mcf5445x/cpu.c cpu specific code +- cpu/mcf5445x/cpu_init.c Flexbus ChipSelect, Mux pins setup, icache and RTC extra regs +- cpu/mcf5445x/interrupts.c cpu specific interrupt support +- cpu/mcf5445x/speed.c system, pci, flexbus, and cpu clock +- cpu/mcf5445x/Makefile Makefile +- cpu/mcf5445x/config.mk config make +- cpu/mcf5445x/start.S start up assembly code + +- doc/README.m54455evb This readme file + +- drivers/net/mcffec.c ColdFire common FEC driver +- drivers/serial/mcfuart.c ColdFire common UART driver + +- include/asm-m68k/bitops.h Bit operation function export +- include/asm-m68k/byteorder.h Byte order functions +- include/asm-m68k/fec.h FEC structure and definition +- include/asm-m68k/fsl_i2c.h I2C structure and definition +- include/asm-m68k/global_data.h Global data structure +- include/asm-m68k/immap.h ColdFire specific header file and driver macros +- include/asm-m68k/immap_5445x.h mcf5445x specific header file +- include/asm-m68k/io.h io functions +- include/asm-m68k/m5445x.h mcf5445x specific header file +- include/asm-m68k/posix_types.h Posix +- include/asm-m68k/processor.h header file +- include/asm-m68k/ptrace.h Exception structure +- include/asm-m68k/rtc.h Realtime clock header file +- include/asm-m68k/string.h String function export +- include/asm-m68k/timer.h Timer structure and definition +- include/asm-m68k/types.h Data types definition +- include/asm-m68k/uart.h Uart structure and definition +- include/asm-m68k/u-boot.h u-boot structure + +- include/configs/M54455EVB.h Board specific configuration file + +- lib_m68k/board.c board init function +- lib_m68k/cache.c +- lib_m68k/interrupts Coldfire common interrupt functions +- lib_m68k/m68k_linux.c +- lib_m68k/time.c Timer functions (Dma timer and PIT) +- lib_m68k/traps.c Exception init code + +- rtc/mcfrtc.c Realtime clock Driver + +1 MCF5445x specific Options/Settings +==================================== +1.1 pre-loader is no longer suppoer in thie coldfire family + +1.2 Configuration settings for M54455EVB Development Board +CONFIG_MCF5445x -- define for all MCF5445x CPUs +CONFIG_M54455 -- define for all Freescale MCF54455 CPUs +CONFIG_M54455EVB -- define for M54455EVB board + +CONFIG_MCFUART -- define to use common CF Uart driver +CFG_UART_PORT -- define UART port number, start with 0, 1 and 2 +CONFIG_BAUDRATE -- define UART baudrate + +CONFIG_MCFRTC -- define to use common CF RTC driver +CFG_MCFRTC_BASE -- provide base address for RTC in immap.h +CFG_RTC_OSCILLATOR -- define RTC clock frequency +RTC_DEBUG -- define to show RTC debug message +CFG_CMD_DATE -- enable to use date feature in u-boot + +CONFIG_MCFFEC -- define to use common CF FEC driver +CONFIG_NET_MULTI -- define to use multi FEC in u-boot +CONFIG_MII -- enable to use MII driver +CONFIG_CF_DOMII -- enable to use MII feature in cmd_mii.c +CFG_DISCOVER_PHY -- enable PHY discovery +CFG_RX_ETH_BUFFER -- Set FEC Receive buffer +CFG_FAULT_ECHO_LINK_DOWN-- +CFG_FEC0_PINMUX -- Set FEC0 Pin configuration +CFG_FEC1_PINMUX -- Set FEC1 Pin configuration +CFG_FEC0_MIIBASE -- Set FEC0 MII base register +CFG_FEC1_MIIBASE -- Set FEC0 MII base register +MCFFEC_TOUT_LOOP -- set FEC timeout loop +CONFIG_HAS_ETH1 -- define to enable second FEC in u-boot + +CONFIG_ISO_PARTITION -- enable ISO read/write +CONFIG_DOS_PARTITION -- enable DOS read/write +CONFIG_IDE_RESET -- define ide_reset() +CONFIG_IDE_PREINIT -- define ide_preinit() +CONFIG_ATAPI -- define ATAPI support +CONFIG_LBA48 -- define LBA48 (larger than 120GB) support +CFG_IDE_MAXBUS -- define max channel +CFG_IDE_MAXDEVICE -- define max devices per channel +CFG_ATA_BASE_ADDR -- define ATA base address +CFG_ATA_IDE0_OFFSET -- define ATA IDE0 offset +CFG_ATA_DATA_OFFSET -- define ATA data IO +CFG_ATA_REG_OFFSET -- define for normal register accesses +CFG_ATA_ALT_OFFSET -- define for alternate registers +CFG_ATA_STRIDE -- define for Interval between registers +_IO_BASE -- define for IO base address + +CONFIG_MCFTMR -- define to use DMA timer +CONFIG_MCFPIT -- define to use PIT timer + +CONFIG_FSL_I2C -- define to use FSL common I2C driver +CONFIG_HARD_I2C -- define for I2C hardware support +CONFIG_SOFT_I2C -- define for I2C bit-banged +CFG_I2C_SPEED -- define for I2C speed +CFG_I2C_SLAVE -- define for I2C slave address +CFG_I2C_OFFSET -- define for I2C base address offset +CFG_IMMR -- define for MBAR offset + +CONFIG_PCI -- define for PCI support +CONFIG_PCI_PNP -- define for Plug n play support +CFG_PCI_MEM_BUS -- PCI memory logical offset +CFG_PCI_MEM_PHYS -- PCI memory physical offset +CFG_PCI_MEM_SIZE -- PCI memory size +CFG_PCI_IO_BUS -- PCI IO logical offset +CFG_PCI_IO_PHYS -- PCI IO physical offset +CFG_PCI_IO_SIZE -- PCI IO size +CFG_PCI_CFG_BUS -- PCI Configuration logical offset +CFG_PCI_CFG_PHYS -- PCI Configuration physical offset +CFG_PCI_CFG_SIZE -- PCI Configuration size + +CONFIG_EXTRA_CLOCK -- Enable extra clock such as vco, flexbus, pci, etc + +CFG_MBAR -- define MBAR offset + +CFG_ATMEL_BOOT -- To determine the u-boot is booted from Atmel or Intel + +CONFIG_MONITOR_IS_IN_RAM -- Not support + +CFG_INIT_RAM_ADDR -- defines the base address of the MCF54455 internal SRAM + +CFG_CSn_BASE -- defines the Chip Select Base register +CFG_CSn_MASK -- defines the Chip Select Mask register +CFG_CSn_CTRL -- defines the Chip Select Control register + +CFG_ATMEL_BASE -- defines the Atmel Flash base +CFG_INTEL_BASE -- defines the Intel Flash base + +CFG_SDRAM_BASE -- defines the DRAM Base +CFG_SDRAM_BASE1 -- defines the DRAM Base 1 + +2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL +=========================================== +2.1. System memory map: + Flash: 0x00000000-0x3FFFFFFF (1024MB) + DDR: 0x40000000-0x7FFFFFFF (1024MB) + SRAM: 0x80000000-0x8FFFFFFF (256MB) + ATA: 0x90000000-0x9FFFFFFF (256MB) + PCI: 0xA0000000-0xBFFFFFFF (512MB) + FlexBus: 0xC0000000-0xDFFFFFFF (512MB) + IP: 0xF0000000-0xFFFFFFFF (256MB) + +2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and + linux kernel, you can customize it based on your system requirements: + Atmel boot: + Flash0: 0x00000000-0x0007FFFF (512KB) + Flash1: 0x04000000-0x05FFFFFF (32MB) + Intel boot: + Flash0: 0x00000000-0x01FFFFFF (32MB) + Flash1: 0x04000000-0x0407FFFF (512KB) + + CPLD: 0x08000000-0x08FFFFFF (16MB) + FPGA: 0x09000000-0x09FFFFFF (16MB) + DDR: 0x40000000-0x4FFFFFFF (256MB) + SRAM: 0x80000000-0x80007FFF (32KB) + IP: 0xFC000000-0xFC0FFFFF (64KB) + +3. SWITCH SETTINGS +================== +3.1 SW1 Pin3: 0 - Boot from Atmel or 1 - INTEL + SW1 Pin4: 0 - ULPI chip not in reset state or 1 - ULPI chip in reset state + SW1 Pin5: 0 - Full ATA Bus enabled, FEC Phy1 powered down + 1 - Upper 8 bits ATA data bus disabled, FEC PHY1 active + SW1 Pin6: 0 - FEC Phy0 active or 1 - FEC Phy0 powered down + SW1 Pin3: 0 - Boot from Atmel or 1 - INTEL + +4. COMPILATION +============== +4.1 To create U-Boot the gcc-4.1-32 compiler set (ColdFire ELF version) +from codesourcery.com was used. Download it from: +http://www.codesourcery.com/gnu_toolchains/coldfire/download.html + +4.2 Compilation + export CROSS_COMPILE=cross-compile-prefix + cd u-boot-1.x.x + make distclean + make M54455EVB_config, or - default to atmel 33Mhz input clock + make M54455EVB_atmel_config, or - default to atmel 33Mhz input clock + make M54455EVB_a33_config, or - default to atmel 33Mhz input clock + make M54455EVB_a66_config, or - default to atmel 66Mhz input clock + make M54455EVB_intel_config, or - default to intel 33Mhz input clock + make M54455EVB_i33_config, or - default to intel 33Mhz input clock + make M54455EVB_i66_config, or - default to intel 66Mhz input clock + make + +5. SCREEN DUMP +============== +5.1 M54455EVB Development board + Boot from Atmel (NOTE: May not show exactly the same) + +U-Boot 1.2.0-g98c80b46-dirty (Jul 26 2007 - 12:44:08) + +CPU: Freescale MCF54455 (Mask:48 Version:1) + CPU CLK 266 Mhz BUS CLK 133 Mhz FLB CLK 66 Mhz + PCI CLK 33 Mhz INP CLK 33 Mhz VCO CLK 533 Mhz +Board: Freescale M54455 EVB +I2C: ready +DRAM: 256 MB +FLASH: 16.5 MB +In: serial +Out: serial +Err: serial +Net: FEC0, FEC1 +IDE: Bus 0: not available +-> print +bootargs=root=/dev/ram rw +bootdelay=1 +baudrate=115200 +ethaddr=00:e0:0c:bc:e5:60 +eth1addr=00:e0:0c:bc:e5:61 +hostname=M54455EVB +netdev=eth0 +inpclk=33333333 +loadaddr=40010000 +load=tftp ${loadaddr) ${u-boot} +upd=run load; run prog +prog=prot off 0 2ffff;era 0 2ffff;cp.b ${loadaddr} 0 ${filesize};save +ethact=FEC0 +mtdids=nor0=M54455EVB-1 +mtdparts=M54455EVB-1:16m(user) +u-boot=u-boot54455.bin +filesize=292b4 +fileaddr=40010000 +gatewayip=192.168.1.1 +netmask=255.255.255.0 +ipaddr=192.168.1.3 +serverip=192.168.1.2 +stdin=serial +stdout=serial +stderr=serial +mem=261632k + +Environment size: 563/8188 bytes +-> bdinfo +memstart = 0x40000000 +memsize = 0x10000000 +flashstart = 0x00000000 +flashsize = 0x01080000 +flashoffset = 0x00000000 +sramstart = 0x80000000 +sramsize = 0x00008000 +mbar = 0xFC000000 +busfreq = 133.333 MHz +pcifreq = 33.333 MHz +flbfreq = 66.666 MHz +inpfreq = 33.333 MHz +vcofreq = 533.333 MHz +ethaddr = 00:E0:0C:BC:E5:60 +eth1addr = 00:E0:0C:BC:E5:61 +ip_addr = 192.168.1.3 +baudrate = 115200 bps +-> +-> help +? - alias for 'help' +autoscr - run script from memory +base - print or set address offset +bdinfo - print Board Info structure +boot - boot default, i.e., run 'bootcmd' +bootd - boot default, i.e., run 'bootcmd' +bootelf - Boot from an ELF image in memory +bootm - boot application image from memory +bootp - boot image via network using BootP/TFTP protocol +bootvx - Boot vxWorks from an ELF image +cmp - memory compare +coninfo - print console devices and information +cp - memory copy +crc32 - checksum calculation +date - get/set/reset date & time +dcache - enable or disable data cache +diskboot- boot from IDE device +echo - echo args to console +erase - erase FLASH memory +ext2load- load binary file from a Ext2 filesystem +ext2ls - list files in a directory (default /) +fatinfo - print information about filesystem +fatload - load binary file from a dos filesystem +fatls - list files in a directory (default /) +flinfo - print FLASH memory information +fsinfo - print information about filesystems +fsload - load binary file from a filesystem image +go - start application at address 'addr' +help - print online help +icache - enable or disable instruction cache +icrc32 - checksum calculation +ide - IDE sub-system +iloop - infinite loop on address range +imd - i2c memory display +iminfo - print header information for application image +imls - list all images found in flash +imm - i2c memory modify (auto-incrementing) +imw - memory write (fill) +inm - memory modify (constant address) +iprobe - probe to discover valid I2C chip addresses +itest - return true/false on integer compare +loadb - load binary file over serial line (kermit mode) +loads - load S-Record file over serial line +loady - load binary file over serial line (ymodem mode) +loop - infinite loop on address range +ls - list files in a directory (default /) +md - memory display +mii - MII utility commands +mm - memory modify (auto-incrementing) +mtest - simple RAM test +mw - memory write (fill) +nfs - boot image via network using NFS protocol +nm - memory modify (constant address) +pci - list and access PCI Configuration Space +ping - send ICMP ECHO_REQUEST to network host +printenv- print environment variables +protect - enable or disable FLASH write protection +rarpboot- boot image via network using RARP/TFTP protocol +reset - Perform RESET of the CPU +run - run commands in an environment variable +saveenv - save environment variables to persistent storage +setenv - set environment variables +sleep - delay execution for some time +tftpboot- boot image via network using TFTP protocol +version - print monitor version +->bootm 4000000 + +## Booting image at 04000000 ... + Image Name: Linux Kernel Image + Created: 2007-08-14 15:13:00 UTC + Image Type: M68K Linux Kernel Image (uncompressed) + Data Size: 2301952 Bytes = 2.2 MB + Load Address: 40020000 + Entry Point: 40020000 + Verifying Checksum ... OK +OK +Linux version 2.6.20-gfe5136d6-dirty (mattw@kea) (gcc version 4.2.0 20070318 (pr +erelease) (Sourcery G++ Lite 4.2-20)) #108 Mon Aug 13 13:00:13 MDT 2007 +starting up linux startmem 0xc0254000, endmem 0xcfffffff, size 253MB +Built 1 zonelists. Total pages: 32624 +Kernel command line: root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=ph +ysmap-flash.0:5M(kernel)ro,-(jffs2) +PID hash table entries: 1024 (order: 10, 4096 bytes) +Console: colour dummy device 80x25 +Dentry cache hash table entries: 32768 (order: 4, 131072 bytes) +Inode-cache hash table entries: 16384 (order: 3, 65536 bytes) +Memory: 257496k/262136k available (1864k kernel code, 2440k data, 88k init) +Mount-cache hash table entries: 1024 +NET: Registered protocol family 16 +SCSI subsystem initialized +NET: Registered protocol family 2 +IP route cache hash table entries: 2048 (order: 0, 8192 bytes) +TCP established hash table entries: 8192 (order: 2, 32768 bytes) +TCP bind hash table entries: 4096 (order: 1, 16384 bytes) +TCP: Hash tables configured (established 8192 bind 4096) +TCP reno registered +JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc. +io scheduler noop registered +io scheduler anticipatory registered +io scheduler deadline registered +io scheduler cfq registered (default) +ColdFire internal UART serial driver version 1.00 +ttyS0 at 0xfc060000 (irq = 90) is a builtin ColdFire UART +ttyS1 at 0xfc064000 (irq = 91) is a builtin ColdFire UART +ttyS2 at 0xfc068000 (irq = 92) is a builtin ColdFire UART +RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize +loop: loaded (max 8 devices) +FEC ENET Version 0.2 +fec: PHY @ 0x0, ID 0x20005ca2 -- DP83849 +eth0: ethernet 00:08:ee:00:e4:19 +physmap platform flash device: 01000000 at 04000000 +physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank + Intel/Sharp Extended Query Table at 0x0031 +Using buffer write method +cfi_cmdset_0001: Erase suspend on write enabled +2 cmdlinepart partitions found on MTD device physmap-flash.0 +Creating 2 MTD partitions on "physmap-flash.0": +0x00000000-0x00500000 : "kernel" +mtd: Giving out device 0 to kernel +0x00500000-0x01000000 : "jffs2" +mtd: Giving out device 1 to jffs2 +mice: PS/2 mouse device common for all mice +i2c /dev entries driver +TCP cubic registered +NET: Registered protocol family 1 +NET: Registered protocol family 17 +NET: Registered protocol family 15 +VFS: Mounted root (jffs2 filesystem). +Setting the hostname to freescale +Mounting filesystems +mount: Mounting usbfs on /proc/bus/usb failed: No such file or directory +Starting syslogd and klogd +Setting up networking on loopback device: +Setting up networking on eth0: +eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX. +Adding static route for default gateway to 172.27.255.254: +Setting nameserver to 172.27.0.1 in /etc/resolv.conf: +Starting inetd: +/ # diff --git a/drivers/net/mcffec.c b/drivers/net/mcffec.c index 68a0ee640d2..2e0ddeb7772 100644 --- a/drivers/net/mcffec.c +++ b/drivers/net/mcffec.c @@ -430,20 +430,33 @@ int fec_init(struct eth_device *dev, bd_t * bd) /* Set station address */ if ((u32) fecp == CFG_FEC0_IOBASE) { +#ifdef CFG_FEC1_IOBASE + volatile fec_t *fecp1 = (fec_t *) (CFG_FEC1_IOBASE); + ea = &bd->bi_enet1addr[0]; + fecp1->palr = + (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]); + fecp1->paur = (ea[4] << 24) | (ea[5] << 16); +#endif ea = &bd->bi_enetaddr[0]; + fecp->palr = + (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]); + fecp->paur = (ea[4] << 24) | (ea[5] << 16); } else { +#ifdef CFG_FEC0_IOBASE + volatile fec_t *fecp0 = (fec_t *) (CFG_FEC0_IOBASE); + ea = &bd->bi_enetaddr[0]; + fecp0->palr = + (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]); + fecp0->paur = (ea[4] << 24) | (ea[5] << 16); +#endif #ifdef CFG_FEC1_IOBASE ea = &bd->bi_enet1addr[0]; + fecp->palr = + (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]); + fecp->paur = (ea[4] << 24) | (ea[5] << 16); #endif } - fecp->palr = (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]); - fecp->paur = (ea[4] << 24) | (ea[5] << 16); -#ifdef ET_DEBUG - printf("Eth Addrs: %02x:%02x:%02x:%02x:%02x:%02x\n", - ea[0], ea[1], ea[2], ea[3], ea[4], ea[5]); -#endif - /* Clear unicast address hash table */ fecp->iaur = 0; fecp->ialr = 0; diff --git a/include/asm-m68k/global_data.h b/include/asm-m68k/global_data.h index f68352f1206..9d9894b1a2e 100644 --- a/include/asm-m68k/global_data.h +++ b/include/asm-m68k/global_data.h @@ -39,6 +39,14 @@ typedef struct global_data { unsigned long baudrate; unsigned long cpu_clk; /* CPU clock in Hz! */ unsigned long bus_clk; +#ifdef CONFIG_PCI + unsigned long pci_clk; +#endif +#ifdef CONFIG_EXTRA_CLOCK + unsigned long inp_clk; + unsigned long vco_clk; + unsigned long flb_clk; +#endif unsigned long ram_size; /* RAM size */ unsigned long reloc_off; /* Relocation Offset */ unsigned long reset_status; /* reset status register at boot */ diff --git a/include/asm-m68k/immap.h b/include/asm-m68k/immap.h index bf7b51becfa..d66c1619b16 100644 --- a/include/asm-m68k/immap.h +++ b/include/asm-m68k/immap.h @@ -170,4 +170,44 @@ #define CFG_NUM_IRQS (128) #endif /* CONFIG_M5329 */ +#ifdef CONFIG_M54455 +#include +#include + +#define CFG_FEC0_IOBASE (MMAP_FEC0) +#define CFG_FEC1_IOBASE (MMAP_FEC1) + +#define CFG_UART_BASE (MMAP_UART0 + (CFG_UART_PORT * 0x4000)) + +#define CFG_MCFRTC_BASE (MMAP_RTC) + +/* Timer */ +#ifdef CONFIG_MCFTMR +#define CFG_UDELAY_BASE (MMAP_DTMR0) +#define CFG_TMR_BASE (MMAP_DTMR1) +#define CFG_TMRPND_REG (((volatile int0_t *)(CFG_INTR_BASE))->iprh0) +#define CFG_TMRINTR_NO (INT0_HI_DTMR1) +#define CFG_TMRINTR_MASK (INTC_IPRH_INT33) +#define CFG_TMRINTR_PEND (CFG_TMRINTR_MASK) +#define CFG_TMRINTR_PRI (6) +#define CFG_TIMER_PRESCALER (((gd->bus_clk / 1000000) - 1) << 8) +#endif + +#ifdef CONFIG_MCFPIT +#define CFG_UDELAY_BASE (MMAP_PIT0) +#define CFG_PIT_BASE (MMAP_PIT1) +#define CFG_PIT_PRESCALE (6) +#endif + +#define CFG_INTR_BASE (MMAP_INTC0) +#define CFG_NUM_IRQS (128) + +#ifdef CONFIG_PCI +#define CFG_PCI_BAR0 CFG_SDRAM_BASE +#define CFG_PCI_BAR4 CFG_SDRAM_BASE +#define CFG_PCI_TBATR0 (CFG_SDRAM_BASE) +#define CFG_PCI_TBATR4 (CFG_SDRAM_BASE) +#endif +#endif /* CONFIG_M54455 */ + #endif /* __IMMAP_H */ diff --git a/include/asm-m68k/immap_5445x.h b/include/asm-m68k/immap_5445x.h new file mode 100644 index 00000000000..d091d7b73c7 --- /dev/null +++ b/include/asm-m68k/immap_5445x.h @@ -0,0 +1,937 @@ +/* + * MCF5445x Internal Memory Map + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __IMMAP_5445X__ +#define __IMMAP_5445X__ + +/* Module Base Addresses */ +#define MMAP_SCM1 0xFC000000 +#define MMAP_XBS 0xFC004000 +#define MMAP_FBCS 0xFC008000 +#define MMAP_FEC0 0xFC030000 +#define MMAP_FEC1 0xFC034000 +#define MMAP_RTC 0xFC03C000 +#define MMAP_EDMA 0xFC044000 +#define MMAP_INTC0 0xFC048000 +#define MMAP_INTC1 0xFC04C000 +#define MMAP_IACK 0xFC054000 +#define MMAP_I2C 0xFC058000 +#define MMAP_DSPI 0xFC05C000 +#define MMAP_UART0 0xFC060000 +#define MMAP_UART1 0xFC064000 +#define MMAP_UART2 0xFC068000 +#define MMAP_DTMR0 0xFC070000 +#define MMAP_DTMR1 0xFC074000 +#define MMAP_DTMR2 0xFC078000 +#define MMAP_DTMR3 0xFC07C000 +#define MMAP_PIT0 0xFC080000 +#define MMAP_PIT1 0xFC084000 +#define MMAP_PIT2 0xFC088000 +#define MMAP_PIT3 0xFC08C000 +#define MMAP_EPORT 0xFC094000 +#define MMAP_WTM 0xFC098000 +#define MMAP_SBF 0xFC0A0000 +#define MMAP_RCM 0xFC0A0000 +#define MMAP_CCM 0xFC0A0000 +#define MMAP_GPIO 0xFC0A4000 +#define MMAP_PCI 0xFC0A8000 +#define MMAP_PCIARB 0xFC0AC000 +#define MMAP_RNG 0xFC0B4000 +#define MMAP_SDRAM 0xFC0B8000 +#define MMAP_SSI 0xFC0BC000 +#define MMAP_PLL 0xFC0C4000 +#define MMAP_ATA 0x90000000 + +/********************************************************************* +* ATA +*********************************************************************/ + +typedef struct atac { + /* PIO */ + u8 toff; /* 0x00 */ + u8 ton; /* 0x01 */ + u8 t1; /* 0x02 */ + u8 t2w; /* 0x03 */ + u8 t2r; /* 0x04 */ + u8 ta; /* 0x05 */ + u8 trd; /* 0x06 */ + u8 t4; /* 0x07 */ + u8 t9; /* 0x08 */ + + /* DMA */ + u8 tm; /* 0x09 */ + u8 tn; /* 0x0A */ + u8 td; /* 0x0B */ + u8 tk; /* 0x0C */ + u8 tack; /* 0x0D */ + u8 tenv; /* 0x0E */ + u8 trp; /* 0x0F */ + u8 tzah; /* 0x10 */ + u8 tmli; /* 0x11 */ + u8 tdvh; /* 0x12 */ + u8 tdzfs; /* 0x13 */ + u8 tdvs; /* 0x14 */ + u8 tcvh; /* 0x15 */ + u8 tss; /* 0x16 */ + u8 tcyc; /* 0x17 */ + + /* FIFO */ + u32 fifo32; /* 0x18 */ + u16 fifo16; /* 0x1C */ + u8 rsvd0[2]; + u8 ffill; /* 0x20 */ + u8 rsvd1[3]; + + /* ATA */ + u8 cr; /* 0x24 */ + u8 rsvd2[3]; + u8 isr; /* 0x28 */ + u8 rsvd3[3]; + u8 ier; /* 0x2C */ + u8 rsvd4[3]; + u8 icr; /* 0x30 */ + u8 rsvd5[3]; + u8 falarm; /* 0x34 */ + u8 rsvd6[106]; +} atac_t; + +/********************************************************************* +* Cross-bar switch (XBS) +*********************************************************************/ + +typedef struct xbs { + u8 resv0[0x100]; + u32 prs1; /* XBS Priority Register */ + u8 resv1[0xC]; + u32 crs1; /* XBS Control Register */ + u8 resv2[0xEC]; + u32 prs2; /* XBS Priority Register */ + u8 resv3[0xC]; + u32 crs2; /* XBS Control Register */ + u8 resv4[0xEC]; + u32 prs3; /* XBS Priority Register */ + u8 resv5[0xC]; + u32 crs3; /* XBS Control Register */ + u8 resv6[0xEC]; + u32 prs4; /* XBS Priority Register */ + u8 resv7[0xC]; + u32 crs4; /* XBS Control Register */ + u8 resv8[0xEC]; + u32 prs5; /* XBS Priority Register */ + u8 resv9[0xC]; + u32 crs5; /* XBS Control Register */ + u8 resv10[0xEC]; + u32 prs6; /* XBS Priority Register */ + u8 resv11[0xC]; + u32 crs6; /* XBS Control Register */ + u8 resv12[0xEC]; + u32 prs7; /* XBS Priority Register */ + u8 resv13[0xC]; + u32 crs7; /* XBS Control Register */ +} xbs_t; + +/********************************************************************* +* FlexBus Chip Selects (FBCS) +*********************************************************************/ + +typedef struct fbcs { + u32 csar0; /* Chip-select Address Register */ + u32 csmr0; /* Chip-select Mask Register */ + u32 cscr0; /* Chip-select Control Register */ + u32 csar1; /* Chip-select Address Register */ + u32 csmr1; /* Chip-select Mask Register */ + u32 cscr1; /* Chip-select Control Register */ + u32 csar2; /* Chip-select Address Register */ + u32 csmr2; /* Chip-select Mask Register */ + u32 cscr2; /* Chip-select Control Register */ + u32 csar3; /* Chip-select Address Register */ + u32 csmr3; /* Chip-select Mask Register */ + u32 cscr3; /* Chip-select Control Register */ +} fbcs_t; + +/********************************************************************* +* Enhanced DMA (EDMA) +*********************************************************************/ + +typedef struct edma { + u32 cr; + u32 es; + u8 resv0[0x6]; + u16 erq; + u8 resv1[0x6]; + u16 eei; + u8 serq; + u8 cerq; + u8 seei; + u8 ceei; + u8 cint; + u8 cerr; + u8 ssrt; + u8 cdne; + u8 resv2[0x6]; + u16 intr; + u8 resv3[0x6]; + u16 err; + u8 resv4[0xD0]; + u8 dchpri0; + u8 dchpri1; + u8 dchpri2; + u8 dchpri3; + u8 dchpri4; + u8 dchpri5; + u8 dchpri6; + u8 dchpri7; + u8 dchpri8; + u8 dchpri9; + u8 dchpri10; + u8 dchpri11; + u8 dchpri12; + u8 dchpri13; + u8 dchpri14; + u8 dchpri15; + u8 resv5[0xEF0]; + u32 tcd0_saddr; + u16 tcd0_attr; + u16 tcd0_soff; + u32 tcd0_nbytes; + u32 tcd0_slast; + u32 tcd0_daddr; + union { + u16 tcd0_citer_elink; + u16 tcd0_citer; + }; + u16 tcd0_doff; + u32 tcd0_dlast_sga; + union { + u16 tcd0_biter_elink; + u16 tcd0_biter; + }; + u16 tcd0_csr; + u32 tcd1_saddr; + u16 tcd1_attr; + u16 tcd1_soff; + u32 tcd1_nbytes; + u32 tcd1_slast; + u32 tcd1_daddr; + union { + u16 tcd1_citer_elink; + u16 tcd1_citer; + }; + u16 tcd1_doff; + u32 tcd1_dlast_sga; + union { + u16 tcd1_biter; + u16 tcd1_biter_elink; + }; + u16 tcd1_csr; + u32 tcd2_saddr; + u16 tcd2_attr; + u16 tcd2_soff; + u32 tcd2_nbytes; + u32 tcd2_slast; + u32 tcd2_daddr; + union { + u16 tcd2_citer; + u16 tcd2_citer_elink; + }; + u16 tcd2_doff; + u32 tcd2_dlast_sga; + union { + u16 tcd2_biter_elink; + u16 tcd2_biter; + }; + u16 tcd2_csr; + u32 tcd3_saddr; + u16 tcd3_attr; + u16 tcd3_soff; + u32 tcd3_nbytes; + u32 tcd3_slast; + u32 tcd3_daddr; + union { + u16 tcd3_citer; + u16 tcd3_citer_elink; + }; + u16 tcd3_doff; + u32 tcd3_dlast_sga; + union { + u16 tcd3_biter_elink; + u16 tcd3_biter; + }; + u16 tcd3_csr; + u32 tcd4_saddr; + u16 tcd4_attr; + u16 tcd4_soff; + u32 tcd4_nbytes; + u32 tcd4_slast; + u32 tcd4_daddr; + union { + u16 tcd4_citer; + u16 tcd4_citer_elink; + }; + u16 tcd4_doff; + u32 tcd4_dlast_sga; + union { + u16 tcd4_biter; + u16 tcd4_biter_elink; + }; + u16 tcd4_csr; + u32 tcd5_saddr; + u16 tcd5_attr; + u16 tcd5_soff; + u32 tcd5_nbytes; + u32 tcd5_slast; + u32 tcd5_daddr; + union { + u16 tcd5_citer; + u16 tcd5_citer_elink; + }; + u16 tcd5_doff; + u32 tcd5_dlast_sga; + union { + u16 tcd5_biter_elink; + u16 tcd5_biter; + }; + u16 tcd5_csr; + u32 tcd6_saddr; + u16 tcd6_attr; + u16 tcd6_soff; + u32 tcd6_nbytes; + u32 tcd6_slast; + u32 tcd6_daddr; + union { + u16 tcd6_citer; + u16 tcd6_citer_elink; + }; + u16 tcd6_doff; + u32 tcd6_dlast_sga; + union { + u16 tcd6_biter_elink; + u16 tcd6_biter; + }; + u16 tcd6_csr; + u32 tcd7_saddr; + u16 tcd7_attr; + u16 tcd7_soff; + u32 tcd7_nbytes; + u32 tcd7_slast; + u32 tcd7_daddr; + union { + u16 tcd7_citer; + u16 tcd7_citer_elink; + }; + u16 tcd7_doff; + u32 tcd7_dlast_sga; + union { + u16 tcd7_biter_elink; + u16 tcd7_biter; + }; + u16 tcd7_csr; + u32 tcd8_saddr; + u16 tcd8_attr; + u16 tcd8_soff; + u32 tcd8_nbytes; + u32 tcd8_slast; + u32 tcd8_daddr; + union { + u16 tcd8_citer; + u16 tcd8_citer_elink; + }; + u16 tcd8_doff; + u32 tcd8_dlast_sga; + union { + u16 tcd8_biter_elink; + u16 tcd8_biter; + }; + u16 tcd8_csr; + u32 tcd9_saddr; + u16 tcd9_attr; + u16 tcd9_soff; + u32 tcd9_nbytes; + u32 tcd9_slast; + u32 tcd9_daddr; + union { + u16 tcd9_citer_elink; + u16 tcd9_citer; + }; + u16 tcd9_doff; + u32 tcd9_dlast_sga; + union { + u16 tcd9_biter_elink; + u16 tcd9_biter; + }; + u16 tcd9_csr; + u32 tcd10_saddr; + u16 tcd10_attr; + u16 tcd10_soff; + u32 tcd10_nbytes; + u32 tcd10_slast; + u32 tcd10_daddr; + union { + u16 tcd10_citer_elink; + u16 tcd10_citer; + }; + u16 tcd10_doff; + u32 tcd10_dlast_sga; + union { + u16 tcd10_biter; + u16 tcd10_biter_elink; + }; + u16 tcd10_csr; + u32 tcd11_saddr; + u16 tcd11_attr; + u16 tcd11_soff; + u32 tcd11_nbytes; + u32 tcd11_slast; + u32 tcd11_daddr; + union { + u16 tcd11_citer; + u16 tcd11_citer_elink; + }; + u16 tcd11_doff; + u32 tcd11_dlast_sga; + union { + u16 tcd11_biter; + u16 tcd11_biter_elink; + }; + u16 tcd11_csr; + u32 tcd12_saddr; + u16 tcd12_attr; + u16 tcd12_soff; + u32 tcd12_nbytes; + u32 tcd12_slast; + u32 tcd12_daddr; + union { + u16 tcd12_citer; + u16 tcd12_citer_elink; + }; + u16 tcd12_doff; + u32 tcd12_dlast_sga; + union { + u16 tcd12_biter; + u16 tcd12_biter_elink; + }; + u16 tcd12_csr; + u32 tcd13_saddr; + u16 tcd13_attr; + u16 tcd13_soff; + u32 tcd13_nbytes; + u32 tcd13_slast; + u32 tcd13_daddr; + union { + u16 tcd13_citer_elink; + u16 tcd13_citer; + }; + u16 tcd13_doff; + u32 tcd13_dlast_sga; + union { + u16 tcd13_biter_elink; + u16 tcd13_biter; + }; + u16 tcd13_csr; + u32 tcd14_saddr; + u16 tcd14_attr; + u16 tcd14_soff; + u32 tcd14_nbytes; + u32 tcd14_slast; + u32 tcd14_daddr; + union { + u16 tcd14_citer; + u16 tcd14_citer_elink; + }; + u16 tcd14_doff; + u32 tcd14_dlast_sga; + union { + u16 tcd14_biter_elink; + u16 tcd14_biter; + }; + u16 tcd14_csr; + u32 tcd15_saddr; + u16 tcd15_attr; + u16 tcd15_soff; + u32 tcd15_nbytes; + u32 tcd15_slast; + u32 tcd15_daddr; + union { + u16 tcd15_citer_elink; + u16 tcd15_citer; + }; + u16 tcd15_doff; + u32 tcd15_dlast_sga; + union { + u16 tcd15_biter; + u16 tcd15_biter_elink; + }; + u16 tcd15_csr; +} edma_t; + +/********************************************************************* +* Interrupt Controller (INTC) +*********************************************************************/ + +typedef struct int0_ctrl { + u32 iprh0; /* 0x00 Pending Register High */ + u32 iprl0; /* 0x04 Pending Register Low */ + u32 imrh0; /* 0x08 Mask Register High */ + u32 imrl0; /* 0x0C Mask Register Low */ + u32 frch0; /* 0x10 Force Register High */ + u32 frcl0; /* 0x14 Force Register Low */ + u16 res1; /* 0x18 - 0x19 */ + u16 icfg0; /* 0x1A Configuration Register */ + u8 simr0; /* 0x1C Set Interrupt Mask */ + u8 cimr0; /* 0x1D Clear Interrupt Mask */ + u8 clmask0; /* 0x1E Current Level Mask */ + u8 slmask; /* 0x1F Saved Level Mask */ + u32 res2[8]; /* 0x20 - 0x3F */ + u8 icr0[64]; /* 0x40 - 0x7F Control registers */ + u32 res3[24]; /* 0x80 - 0xDF */ + u8 swiack0; /* 0xE0 Software Interrupt Acknowledge */ + u8 res4[3]; /* 0xE1 - 0xE3 */ + u8 Lniack0_1; /* 0xE4 Level n interrupt acknowledge resister */ + u8 res5[3]; /* 0xE5 - 0xE7 */ + u8 Lniack0_2; /* 0xE8 Level n interrupt acknowledge resister */ + u8 res6[3]; /* 0xE9 - 0xEB */ + u8 Lniack0_3; /* 0xEC Level n interrupt acknowledge resister */ + u8 res7[3]; /* 0xED - 0xEF */ + u8 Lniack0_4; /* 0xF0 Level n interrupt acknowledge resister */ + u8 res8[3]; /* 0xF1 - 0xF3 */ + u8 Lniack0_5; /* 0xF4 Level n interrupt acknowledge resister */ + u8 res9[3]; /* 0xF5 - 0xF7 */ + u8 Lniack0_6; /* 0xF8 Level n interrupt acknowledge resister */ + u8 resa[3]; /* 0xF9 - 0xFB */ + u8 Lniack0_7; /* 0xFC Level n interrupt acknowledge resister */ + u8 resb[3]; /* 0xFD - 0xFF */ +} int0_t; + +typedef struct int1_ctrl { + /* Interrupt Controller 1 */ + u32 iprh1; /* 0x00 Pending Register High */ + u32 iprl1; /* 0x04 Pending Register Low */ + u32 imrh1; /* 0x08 Mask Register High */ + u32 imrl1; /* 0x0C Mask Register Low */ + u32 frch1; /* 0x10 Force Register High */ + u32 frcl1; /* 0x14 Force Register Low */ + u16 res1; /* 0x18 */ + u16 icfg1; /* 0x1A Configuration Register */ + u8 simr1; /* 0x1C Set Interrupt Mask */ + u8 cimr1; /* 0x1D Clear Interrupt Mask */ + u16 res2; /* 0x1E - 0x1F */ + u32 res3[8]; /* 0x20 - 0x3F */ + u8 icr1[64]; /* 0x40 - 0x7F */ + u32 res4[24]; /* 0x80 - 0xDF */ + u8 swiack1; /* 0xE0 Software Interrupt Acknowledge */ + u8 res5[3]; /* 0xE1 - 0xE3 */ + u8 Lniack1_1; /* 0xE4 Level n interrupt acknowledge resister */ + u8 res6[3]; /* 0xE5 - 0xE7 */ + u8 Lniack1_2; /* 0xE8 Level n interrupt acknowledge resister */ + u8 res7[3]; /* 0xE9 - 0xEB */ + u8 Lniack1_3; /* 0xEC Level n interrupt acknowledge resister */ + u8 res8[3]; /* 0xED - 0xEF */ + u8 Lniack1_4; /* 0xF0 Level n interrupt acknowledge resister */ + u8 res9[3]; /* 0xF1 - 0xF3 */ + u8 Lniack1_5; /* 0xF4 Level n interrupt acknowledge resister */ + u8 resa[3]; /* 0xF5 - 0xF7 */ + u8 Lniack1_6; /* 0xF8 Level n interrupt acknowledge resister */ + u8 resb[3]; /* 0xF9 - 0xFB */ + u8 Lniack1_7; /* 0xFC Level n interrupt acknowledge resister */ + u8 resc[3]; /* 0xFD - 0xFF */ +} int1_t; + +/********************************************************************* +* Global Interrupt Acknowledge (IACK) +*********************************************************************/ + +typedef struct iack { + u8 resv0[0xE0]; + u8 gswiack; + u8 resv1[0x3]; + u8 gl1iack; + u8 resv2[0x3]; + u8 gl2iack; + u8 resv3[0x3]; + u8 gl3iack; + u8 resv4[0x3]; + u8 gl4iack; + u8 resv5[0x3]; + u8 gl5iack; + u8 resv6[0x3]; + u8 gl6iack; + u8 resv7[0x3]; + u8 gl7iack; +} iack_t; + +/********************************************************************* +* DMA Serial Peripheral Interface (DSPI) +*********************************************************************/ + +typedef struct dspi { + u32 dmcr; + u8 resv0[0x4]; + u32 dtcr; + u32 dctar0; + u32 dctar1; + u32 dctar2; + u32 dctar3; + u32 dctar4; + u32 dctar5; + u32 dctar6; + u32 dctar7; + u32 dsr; + u32 dirsr; + u32 dtfr; + u32 drfr; + u32 dtfdr0; + u32 dtfdr1; + u32 dtfdr2; + u32 dtfdr3; + u8 resv1[0x30]; + u32 drfdr0; + u32 drfdr1; + u32 drfdr2; + u32 drfdr3; +} dspi_t; + +/********************************************************************* +* Edge Port Module (EPORT) +*********************************************************************/ + +typedef struct eport { + u16 eppar; + u8 epddr; + u8 epier; + u8 epdr; + u8 eppdr; + u8 epfr; +} eport_t; + +/********************************************************************* +* Watchdog Timer Modules (WTM) +*********************************************************************/ + +typedef struct wtm { + u16 wcr; + u16 wmr; + u16 wcntr; + u16 wsr; +} wtm_t; + +/********************************************************************* +* Serial Boot Facility (SBF) +*********************************************************************/ + +typedef struct sbf { + u8 resv0[0x18]; + u16 sbfsr; /* Serial Boot Facility Status Register */ + u8 resv1[0x6]; + u16 sbfcr; /* Serial Boot Facility Control Register */ +} sbf_t; + +/********************************************************************* +* Reset Controller Module (RCM) +*********************************************************************/ + +typedef struct rcm { + u8 rcr; + u8 rsr; +} rcm_t; + +/********************************************************************* +* Chip Configuration Module (CCM) +*********************************************************************/ + +typedef struct ccm { + u8 ccm_resv0[0x4]; + u16 ccr; /* Chip Configuration Register (256 TEPBGA, Read-only) */ + u8 resv1[0x2]; + u16 rcon; /* Reset Configuration (256 TEPBGA, Read-only) */ + u16 cir; /* Chip Identification Register (Read-only) */ + u8 resv2[0x4]; + u16 misccr; /* Miscellaneous Control Register */ + u16 cdr; /* Clock Divider Register */ + u16 uocsr; /* USB On-the-Go Controller Status Register */ +} ccm_t; + +/********************************************************************* +* General Purpose I/O Module (GPIO) +*********************************************************************/ + +typedef struct gpio { + u8 podr_fec0h; /* FEC0 High Port Output Data Register */ + u8 podr_fec0l; /* FEC0 Low Port Output Data Register */ + u8 podr_ssi; /* SSI Port Output Data Register */ + u8 podr_fbctl; /* Flexbus Control Port Output Data Register */ + u8 podr_be; /* Flexbus Byte Enable Port Output Data Register */ + u8 podr_cs; /* Flexbus Chip-Select Port Output Data Register */ + u8 podr_dma; /* DMA Port Output Data Register */ + u8 podr_feci2c; /* FEC1 / I2C Port Output Data Register */ + u8 resv0[0x1]; + u8 podr_uart; /* UART Port Output Data Register */ + u8 podr_dspi; /* DSPI Port Output Data Register */ + u8 podr_timer; /* Timer Port Output Data Register */ + u8 podr_pci; /* PCI Port Output Data Register */ + u8 podr_usb; /* USB Port Output Data Register */ + u8 podr_atah; /* ATA High Port Output Data Register */ + u8 podr_atal; /* ATA Low Port Output Data Register */ + u8 podr_fec1h; /* FEC1 High Port Output Data Register */ + u8 podr_fec1l; /* FEC1 Low Port Output Data Register */ + u8 resv1[0x2]; + u8 podr_fbadh; /* Flexbus AD High Port Output Data Register */ + u8 podr_fbadmh; /* Flexbus AD Med-High Port Output Data Register */ + u8 podr_fbadml; /* Flexbus AD Med-Low Port Output Data Register */ + u8 podr_fbadl; /* Flexbus AD Low Port Output Data Register */ + u8 pddr_fec0h; /* FEC0 High Port Data Direction Register */ + u8 pddr_fec0l; /* FEC0 Low Port Data Direction Register */ + u8 pddr_ssi; /* SSI Port Data Direction Register */ + u8 pddr_fbctl; /* Flexbus Control Port Data Direction Register */ + u8 pddr_be; /* Flexbus Byte Enable Port Data Direction Register */ + u8 pddr_cs; /* Flexbus Chip-Select Port Data Direction Register */ + u8 pddr_dma; /* DMA Port Data Direction Register */ + u8 pddr_feci2c; /* FEC1 / I2C Port Data Direction Register */ + u8 resv2[0x1]; + u8 pddr_uart; /* UART Port Data Direction Register */ + u8 pddr_dspi; /* DSPI Port Data Direction Register */ + u8 pddr_timer; /* Timer Port Data Direction Register */ + u8 pddr_pci; /* PCI Port Data Direction Register */ + u8 pddr_usb; /* USB Port Data Direction Register */ + u8 pddr_atah; /* ATA High Port Data Direction Register */ + u8 pddr_atal; /* ATA Low Port Data Direction Register */ + u8 pddr_fec1h; /* FEC1 High Port Data Direction Register */ + u8 pddr_fec1l; /* FEC1 Low Port Data Direction Register */ + u8 resv3[0x2]; + u8 pddr_fbadh; /* Flexbus AD High Port Data Direction Register */ + u8 pddr_fbadmh; /* Flexbus AD Med-High Port Data Direction Register */ + u8 pddr_fbadml; /* Flexbus AD Med-Low Port Data Direction Register */ + u8 pddr_fbadl; /* Flexbus AD Low Port Data Direction Register */ + u8 ppdsdr_fec0h; /* FEC0 High Port Pin Data/Set Data Register */ + u8 ppdsdr_fec0l; /* FEC0 Low Port Clear Output Data Register */ + u8 ppdsdr_ssi; /* SSI Port Pin Data/Set Data Register */ + u8 ppdsdr_fbctl; /* Flexbus Control Port Pin Data/Set Data Register */ + u8 ppdsdr_be; /* Flexbus Byte Enable Port Pin Data/Set Data Register */ + u8 ppdsdr_cs; /* Flexbus Chip-Select Port Pin Data/Set Data Register */ + u8 ppdsdr_dma; /* DMA Port Pin Data/Set Data Register */ + u8 ppdsdr_feci2c; /* FEC1 / I2C Port Pin Data/Set Data Register */ + u8 resv4[0x1]; + u8 ppdsdr_uart; /* UART Port Pin Data/Set Data Register */ + u8 ppdsdr_dspi; /* DSPI Port Pin Data/Set Data Register */ + u8 ppdsdr_timer; /* FTimer Port Pin Data/Set Data Register */ + u8 ppdsdr_pci; /* PCI Port Pin Data/Set Data Register */ + u8 ppdsdr_usb; /* USB Port Pin Data/Set Data Register */ + u8 ppdsdr_atah; /* ATA High Port Pin Data/Set Data Register */ + u8 ppdsdr_atal; /* ATA Low Port Pin Data/Set Data Register */ + u8 ppdsdr_fec1h; /* FEC1 High Port Pin Data/Set Data Register */ + u8 ppdsdr_fec1l; /* FEC1 Low Port Pin Data/Set Data Register */ + u8 resv5[0x2]; + u8 ppdsdr_fbadh; /* Flexbus AD High Port Pin Data/Set Data Register */ + u8 ppdsdr_fbadmh; /* Flexbus AD Med-High Port Pin Data/Set Data Register */ + u8 ppdsdr_fbadml; /* Flexbus AD Med-Low Port Pin Data/Set Data Register */ + u8 ppdsdr_fbadl; /* Flexbus AD Low Port Pin Data/Set Data Register */ + u8 pclrr_fec0h; /* FEC0 High Port Clear Output Data Register */ + u8 pclrr_fec0l; /* FEC0 Low Port Pin Data/Set Data Register */ + u8 pclrr_ssi; /* SSI Port Clear Output Data Register */ + u8 pclrr_fbctl; /* Flexbus Control Port Clear Output Data Register */ + u8 pclrr_be; /* Flexbus Byte Enable Port Clear Output Data Register */ + u8 pclrr_cs; /* Flexbus Chip-Select Port Clear Output Data Register */ + u8 pclrr_dma; /* DMA Port Clear Output Data Register */ + u8 pclrr_feci2c; /* FEC1 / I2C Port Clear Output Data Register */ + u8 resv6[0x1]; + u8 pclrr_uart; /* UART Port Clear Output Data Register */ + u8 pclrr_dspi; /* DSPI Port Clear Output Data Register */ + u8 pclrr_timer; /* Timer Port Clear Output Data Register */ + u8 pclrr_pci; /* PCI Port Clear Output Data Register */ + u8 pclrr_usb; /* USB Port Clear Output Data Register */ + u8 pclrr_atah; /* ATA High Port Clear Output Data Register */ + u8 pclrr_atal; /* ATA Low Port Clear Output Data Register */ + u8 pclrr_fec1h; /* FEC1 High Port Clear Output Data Register */ + u8 pclrr_fec1l; /* FEC1 Low Port Clear Output Data Register */ + u8 resv7[0x2]; + u8 pclrr_fbadh; /* Flexbus AD High Port Clear Output Data Register */ + u8 pclrr_fbadmh; /* Flexbus AD Med-High Port Clear Output Data Register */ + u8 pclrr_fbadml; /* Flexbus AD Med-Low Port Clear Output Data Register */ + u8 pclrr_fbadl; /* Flexbus AD Low Port Clear Output Data Register */ + u8 par_fec; /* FEC Pin Assignment Register */ + u8 par_dma; /* DMA Pin Assignment Register */ + u8 par_fbctl; /* Flexbus Control Pin Assignment Register */ + u8 par_dspi; /* DSPI Pin Assignment Register */ + u8 par_be; /* Flexbus Byte-Enable Pin Assignment Register */ + u8 par_cs; /* Flexbus Chip-Select Pin Assignment Register */ + u8 par_timer; /* Time Pin Assignment Register */ + u8 par_usb; /* USB Pin Assignment Register */ + u8 resv8[0x1]; + u8 par_uart; /* UART Pin Assignment Register */ + u16 par_feci2c; /* FEC / I2C Pin Assignment Register */ + u16 par_ssi; /* SSI Pin Assignment Register */ + u16 par_ata; /* ATA Pin Assignment Register */ + u8 par_irq; /* IRQ Pin Assignment Register */ + u8 resv9[0x1]; + u16 par_pci; /* PCI Pin Assignment Register */ + u8 mscr_sdram; /* SDRAM Mode Select Control Register */ + u8 mscr_pci; /* PCI Mode Select Control Register */ + u8 resv10[0x2]; + u8 dscr_i2c; /* I2C Drive Strength Control Register */ + u8 dscr_flexbus; /* FLEXBUS Drive Strength Control Register */ + u8 dscr_fec; /* FEC Drive Strength Control Register */ + u8 dscr_uart; /* UART Drive Strength Control Register */ + u8 dscr_dspi; /* DSPI Drive Strength Control Register */ + u8 dscr_timer; /* TIMER Drive Strength Control Register */ + u8 dscr_ssi; /* SSI Drive Strength Control Register */ + u8 dscr_dma; /* DMA Drive Strength Control Register */ + u8 dscr_debug; /* DEBUG Drive Strength Control Register */ + u8 dscr_reset; /* RESET Drive Strength Control Register */ + u8 dscr_irq; /* IRQ Drive Strength Control Register */ + u8 dscr_usb; /* USB Drive Strength Control Register */ + u8 dscr_ata; /* ATA Drive Strength Control Register */ +} gpio_t; + +/********************************************************************* +* Random Number Generator (RNG) +*********************************************************************/ + +typedef struct rng { + u32 rngcr; + u32 rngsr; + u32 rnger; + u32 rngout; +} rng_t; + +/********************************************************************* +* SDRAM Controller (SDRAMC) +*********************************************************************/ + +typedef struct sdramc { + u32 sdmr; /* SDRAM Mode/Extended Mode Register */ + u32 sdcr; /* SDRAM Control Register */ + u32 sdcfg1; /* SDRAM Configuration Register 1 */ + u32 sdcfg2; /* SDRAM Chip Select Register */ + u8 resv0[0x100]; + u32 sdcs0; /* SDRAM Mode/Extended Mode Register */ + u32 sdcs1; /* SDRAM Mode/Extended Mode Register */ +} sdramc_t; + +/********************************************************************* +* Synchronous Serial Interface (SSI) +*********************************************************************/ + +typedef struct ssi { + u32 tx0; + u32 tx1; + u32 rx0; + u32 rx1; + u32 cr; + u32 isr; + u32 ier; + u32 tcr; + u32 rcr; + u32 ccr; + u8 resv0[0x4]; + u32 fcsr; + u8 resv1[0x8]; + u32 acr; + u32 acadd; + u32 acdat; + u32 atag; + u32 tmask; + u32 rmask; +} ssi_t; + +/********************************************************************* +* Phase Locked Loop (PLL) +*********************************************************************/ + +typedef struct pll { + u32 pcr; /* PLL Control Register */ + u32 psr; /* PLL Status Register */ +} pll_t; + +typedef struct pci { + u32 idr; /* 0x00 Device Id / Vendor Id Register */ + u32 scr; /* 0x04 Status / command Register */ + u32 ccrir; /* 0x08 Class Code / Revision Id Register */ + u32 cr1; /* 0x0c Configuration 1 Register */ + u32 bar0; /* 0x10 Base address register 0 Register */ + u32 bar1; /* 0x14 Base address register 1 Register */ + u32 bar2; /* 0x18 Base address register 2 Register */ + u32 bar3; /* 0x1c Base address register 3 Register */ + u32 bar4; /* 0x20 Base address register 4 Register */ + u32 bar5; /* 0x24 Base address register 5 Register */ + u32 ccpr; /* 0x28 Cardbus CIS Pointer Register */ + u32 sid; /* 0x2c Subsystem ID / Subsystem Vendor ID Register */ + u32 erbar; /* 0x30 Expansion ROM Base Address Register */ + u32 cpr; /* 0x34 Capabilities Pointer Register */ + u32 rsvd1; /* 0x38 */ + u32 cr2; /* 0x3c Configuration Register 2 */ + u32 rsvd2[8]; /* 0x40 - 0x5f */ + + /* General control / status registers */ + u32 gscr; /* 0x60 Global Status / Control Register */ + u32 tbatr0a; /* 0x64 Target Base Address Translation Register 0 */ + u32 tbatr1a; /* 0x68 Target Base Address Translation Register 1 */ + u32 tcr1; /* 0x6c Target Control 1 Register */ + u32 iw0btar; /* 0x70 Initiator Window 0 Base/Translation addr */ + u32 iw1btar; /* 0x74 Initiator Window 1 Base/Translation addr */ + u32 iw2btar; /* 0x78 Initiator Window 2 Base/Translation addr */ + u32 rsvd3; /* 0x7c */ + u32 iwcr; /* 0x80 Initiator Window Configuration Register */ + u32 icr; /* 0x84 Initiator Control Register */ + u32 isr; /* 0x88 Initiator Status Register */ + u32 tcr2; /* 0x8c Target Control 2 Register */ + u32 tbatr0; /* 0x90 Target Base Address Translation Register 0 */ + u32 tbatr1; /* 0x94 Target Base Address Translation Register 1 */ + u32 tbatr2; /* 0x98 Target Base Address Translation Register 2 */ + u32 tbatr3; /* 0x9c Target Base Address Translation Register 3 */ + u32 tbatr4; /* 0xa0 Target Base Address Translation Register 4 */ + u32 tbatr5; /* 0xa4 Target Base Address Translation Register 5 */ + u32 intr; /* 0xa8 Interrupt Register */ + u32 rsvd4[19]; /* 0xac - 0xf7 */ + u32 car; /* 0xf8 Configuration Address Register */ +} pci_t; + +typedef struct pci_arbiter { + /* Pci Arbiter Registers */ + union { + u32 acr; /* Arbiter Control Register */ + u32 asr; /* Arbiter Status Register */ + }; +} pciarb_t; + +/* Register read/write struct */ +typedef struct scm1 { + u32 mpr; /* 0x00 Master Privilege Register */ + u32 rsvd1[7]; + u32 pacra; /* 0x20 Peripheral Access Control Register A */ + u32 pacrb; /* 0x24 Peripheral Access Control Register B */ + u32 pacrc; /* 0x28 Peripheral Access Control Register C */ + u32 pacrd; /* 0x2C Peripheral Access Control Register D */ + u32 rsvd2[4]; + u32 pacre; /* 0x40 Peripheral Access Control Register E */ + u32 pacrf; /* 0x44 Peripheral Access Control Register F */ + u32 pacrg; /* 0x48 Peripheral Access Control Register G */ +} scm1_t; +/********************************************************************/ + +typedef struct rtcex { + u32 rsvd1[3]; + u32 gocu; + u32 gocl; +} rtcex_t; +#endif /* __IMMAP_5445X__ */ diff --git a/include/asm-m68k/m5445x.h b/include/asm-m68k/m5445x.h new file mode 100644 index 00000000000..8b886b0b605 --- /dev/null +++ b/include/asm-m68k/m5445x.h @@ -0,0 +1,1541 @@ +/* + * MCF5445x Internal Memory Map + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __MCF5445X__ +#define __MCF5445X__ + +/********************************************************************* +* Cross-bar switch (XBS) +*********************************************************************/ + +/* Bit definitions and macros for PRS group */ +#define XBS_PRS_M0(x) (((x)&0x00000007)) /* Core */ +#define XBS_PRS_M1(x) (((x)&0x00000007)<<4) /* eDMA */ +#define XBS_PRS_M2(x) (((x)&0x00000007)<<8) /* FEC0 */ +#define XBS_PRS_M3(x) (((x)&0x00000007)<<12) /* FEC1 */ +#define XBS_PRS_M5(x) (((x)&0x00000007)<<20) /* PCI controller */ +#define XBS_PRS_M6(x) (((x)&0x00000007)<<24) /* USB OTG */ +#define XBS_PRS_M7(x) (((x)&0x00000007)<<28) /* Serial Boot */ + +/* Bit definitions and macros for CRS group */ +#define XBS_CRS_PARK(x) (((x)&0x00000007)) /* Master parking ctrl */ +#define XBS_CRS_PCTL(x) (((x)&0x00000003)<<4) /* Parking mode ctrl */ +#define XBS_CRS_ARB (0x00000100) /* Arbitration Mode */ +#define XBS_CRS_RO (0x80000000) /* Read Only */ + +#define XBS_CRS_PCTL_PARK_FIELD (0) +#define XBS_CRS_PCTL_PARK_ON_LAST (1) +#define XBS_CRS_PCTL_PARK_NONE (2) +#define XBS_CRS_PCTL_PARK_CORE (0) +#define XBS_CRS_PCTL_PARK_EDMA (1) +#define XBS_CRS_PCTL_PARK_FEC0 (2) +#define XBS_CRS_PCTL_PARK_FEC1 (3) +#define XBS_CRS_PCTL_PARK_PCI (5) +#define XBS_CRS_PCTL_PARK_USB (6) +#define XBS_CRS_PCTL_PARK_SBF (7) + +/********************************************************************* +* FlexBus Chip Selects (FBCS) +*********************************************************************/ + +/* Bit definitions and macros for CSAR group */ +#define FBCS_CSAR_BA(x) ((x)&0xFFFF0000) + +/* Bit definitions and macros for CSMR group */ +#define FBCS_CSMR_V (0x00000001) /* Valid bit */ +#define FBCS_CSMR_WP (0x00000100) /* Write protect */ +#define FBCS_CSMR_BAM(x) (((x)&0x0000FFFF)<<16) /* Base address mask */ +#define FBCS_CSMR_BAM_4G (0xFFFF0000) +#define FBCS_CSMR_BAM_2G (0x7FFF0000) +#define FBCS_CSMR_BAM_1G (0x3FFF0000) +#define FBCS_CSMR_BAM_1024M (0x3FFF0000) +#define FBCS_CSMR_BAM_512M (0x1FFF0000) +#define FBCS_CSMR_BAM_256M (0x0FFF0000) +#define FBCS_CSMR_BAM_128M (0x07FF0000) +#define FBCS_CSMR_BAM_64M (0x03FF0000) +#define FBCS_CSMR_BAM_32M (0x01FF0000) +#define FBCS_CSMR_BAM_16M (0x00FF0000) +#define FBCS_CSMR_BAM_8M (0x007F0000) +#define FBCS_CSMR_BAM_4M (0x003F0000) +#define FBCS_CSMR_BAM_2M (0x001F0000) +#define FBCS_CSMR_BAM_1M (0x000F0000) +#define FBCS_CSMR_BAM_1024K (0x000F0000) +#define FBCS_CSMR_BAM_512K (0x00070000) +#define FBCS_CSMR_BAM_256K (0x00030000) +#define FBCS_CSMR_BAM_128K (0x00010000) +#define FBCS_CSMR_BAM_64K (0x00000000) + +/* Bit definitions and macros for CSCR group */ +#define FBCS_CSCR_BSTW (0x00000008) /* Burst-write enable */ +#define FBCS_CSCR_BSTR (0x00000010) /* Burst-read enable */ +#define FBCS_CSCR_BEM (0x00000020) /* Byte-enable mode */ +#define FBCS_CSCR_PS(x) (((x)&0x00000003)<<6) /* Port size */ +#define FBCS_CSCR_AA (0x00000100) /* Auto-acknowledge */ +#define FBCS_CSCR_WS(x) (((x)&0x0000003F)<<10) /* Wait states */ +#define FBCS_CSCR_WRAH(x) (((x)&0x00000003)<<16) /* Write address hold or deselect */ +#define FBCS_CSCR_RDAH(x) (((x)&0x00000003)<<18) /* Read address hold or deselect */ +#define FBCS_CSCR_ASET(x) (((x)&0x00000003)<<20) /* Address setup */ +#define FBCS_CSCR_SWSEN (0x00800000) /* Secondary wait state enable */ +#define FBCS_CSCR_SWS(x) (((x)&0x0000003F)<<26) /* Secondary wait states */ + +#define FBCS_CSCR_PS_8 (0x00000040) +#define FBCS_CSCR_PS_16 (0x00000080) +#define FBCS_CSCR_PS_32 (0x00000000) + +/********************************************************************* +* Interrupt Controller (INTC) +*********************************************************************/ +#define INT0_LO_RSVD0 (0) +#define INT0_LO_EPORT1 (1) +#define INT0_LO_EPORT2 (2) +#define INT0_LO_EPORT3 (3) +#define INT0_LO_EPORT4 (4) +#define INT0_LO_EPORT5 (5) +#define INT0_LO_EPORT6 (6) +#define INT0_LO_EPORT7 (7) +#define INT0_LO_EDMA_00 (8) +#define INT0_LO_EDMA_01 (9) +#define INT0_LO_EDMA_02 (10) +#define INT0_LO_EDMA_03 (11) +#define INT0_LO_EDMA_04 (12) +#define INT0_LO_EDMA_05 (13) +#define INT0_LO_EDMA_06 (14) +#define INT0_LO_EDMA_07 (15) +#define INT0_LO_EDMA_08 (16) +#define INT0_LO_EDMA_09 (17) +#define INT0_LO_EDMA_10 (18) +#define INT0_LO_EDMA_11 (19) +#define INT0_LO_EDMA_12 (20) +#define INT0_LO_EDMA_13 (21) +#define INT0_LO_EDMA_14 (22) +#define INT0_LO_EDMA_15 (23) +#define INT0_LO_EDMA_ERR (24) +#define INT0_LO_SCM (25) +#define INT0_LO_UART0 (26) +#define INT0_LO_UART1 (27) +#define INT0_LO_UART2 (28) +#define INT0_LO_RSVD1 (29) +#define INT0_LO_I2C (30) +#define INT0_LO_QSPI (31) +#define INT0_HI_DTMR0 (32) +#define INT0_HI_DTMR1 (33) +#define INT0_HI_DTMR2 (34) +#define INT0_HI_DTMR3 (35) +#define INT0_HI_FEC0_TXF (36) +#define INT0_HI_FEC0_TXB (37) +#define INT0_HI_FEC0_UN (38) +#define INT0_HI_FEC0_RL (39) +#define INT0_HI_FEC0_RXF (40) +#define INT0_HI_FEC0_RXB (41) +#define INT0_HI_FEC0_MII (42) +#define INT0_HI_FEC0_LC (43) +#define INT0_HI_FEC0_HBERR (44) +#define INT0_HI_FEC0_GRA (45) +#define INT0_HI_FEC0_EBERR (46) +#define INT0_HI_FEC0_BABT (47) +#define INT0_HI_FEC0_BABR (48) +#define INT0_HI_FEC1_TXF (49) +#define INT0_HI_FEC1_TXB (50) +#define INT0_HI_FEC1_UN (51) +#define INT0_HI_FEC1_RL (52) +#define INT0_HI_FEC1_RXF (53) +#define INT0_HI_FEC1_RXB (54) +#define INT0_HI_FEC1_MII (55) +#define INT0_HI_FEC1_LC (56) +#define INT0_HI_FEC1_HBERR (57) +#define INT0_HI_FEC1_GRA (58) +#define INT0_HI_FEC1_EBERR (59) +#define INT0_HI_FEC1_BABT (60) +#define INT0_HI_FEC1_BABR (61) +#define INT0_HI_SCMIR (62) +#define INT0_HI_RTC_ISR (63) + +#define INT1_HI_DSPI_EOQF (33) +#define INT1_HI_DSPI_TFFF (34) +#define INT1_HI_DSPI_TCF (35) +#define INT1_HI_DSPI_TFUF (36) +#define INT1_HI_DSPI_RFDF (37) +#define INT1_HI_DSPI_RFOF (38) +#define INT1_HI_DSPI_RFOF_TFUF (39) +#define INT1_HI_RNG_EI (40) +#define INT1_HI_PIT0_PIF (43) +#define INT1_HI_PIT1_PIF (44) +#define INT1_HI_PIT2_PIF (45) +#define INT1_HI_PIT3_PIF (46) +#define INT1_HI_USBOTG_USBSTS (47) +#define INT1_HI_SSI_ISR (49) +#define INT1_HI_CCM_UOCSR (53) +#define INT1_HI_ATA_ISR (54) +#define INT1_HI_PCI_SCR (55) +#define INT1_HI_PCI_ASR (56) +#define INT1_HI_PLL_LOCKS (57) + +/* Bit definitions and macros for IPRH */ +#define INTC_IPRH_INT32 (0x00000001) +#define INTC_IPRH_INT33 (0x00000002) +#define INTC_IPRH_INT34 (0x00000004) +#define INTC_IPRH_INT35 (0x00000008) +#define INTC_IPRH_INT36 (0x00000010) +#define INTC_IPRH_INT37 (0x00000020) +#define INTC_IPRH_INT38 (0x00000040) +#define INTC_IPRH_INT39 (0x00000080) +#define INTC_IPRH_INT40 (0x00000100) +#define INTC_IPRH_INT41 (0x00000200) +#define INTC_IPRH_INT42 (0x00000400) +#define INTC_IPRH_INT43 (0x00000800) +#define INTC_IPRH_INT44 (0x00001000) +#define INTC_IPRH_INT45 (0x00002000) +#define INTC_IPRH_INT46 (0x00004000) +#define INTC_IPRH_INT47 (0x00008000) +#define INTC_IPRH_INT48 (0x00010000) +#define INTC_IPRH_INT49 (0x00020000) +#define INTC_IPRH_INT50 (0x00040000) +#define INTC_IPRH_INT51 (0x00080000) +#define INTC_IPRH_INT52 (0x00100000) +#define INTC_IPRH_INT53 (0x00200000) +#define INTC_IPRH_INT54 (0x00400000) +#define INTC_IPRH_INT55 (0x00800000) +#define INTC_IPRH_INT56 (0x01000000) +#define INTC_IPRH_INT57 (0x02000000) +#define INTC_IPRH_INT58 (0x04000000) +#define INTC_IPRH_INT59 (0x08000000) +#define INTC_IPRH_INT60 (0x10000000) +#define INTC_IPRH_INT61 (0x20000000) +#define INTC_IPRH_INT62 (0x40000000) +#define INTC_IPRH_INT63 (0x80000000) + +/* Bit definitions and macros for IPRL */ +#define INTC_IPRL_INT0 (0x00000001) +#define INTC_IPRL_INT1 (0x00000002) +#define INTC_IPRL_INT2 (0x00000004) +#define INTC_IPRL_INT3 (0x00000008) +#define INTC_IPRL_INT4 (0x00000010) +#define INTC_IPRL_INT5 (0x00000020) +#define INTC_IPRL_INT6 (0x00000040) +#define INTC_IPRL_INT7 (0x00000080) +#define INTC_IPRL_INT8 (0x00000100) +#define INTC_IPRL_INT9 (0x00000200) +#define INTC_IPRL_INT10 (0x00000400) +#define INTC_IPRL_INT11 (0x00000800) +#define INTC_IPRL_INT12 (0x00001000) +#define INTC_IPRL_INT13 (0x00002000) +#define INTC_IPRL_INT14 (0x00004000) +#define INTC_IPRL_INT15 (0x00008000) +#define INTC_IPRL_INT16 (0x00010000) +#define INTC_IPRL_INT17 (0x00020000) +#define INTC_IPRL_INT18 (0x00040000) +#define INTC_IPRL_INT19 (0x00080000) +#define INTC_IPRL_INT20 (0x00100000) +#define INTC_IPRL_INT21 (0x00200000) +#define INTC_IPRL_INT22 (0x00400000) +#define INTC_IPRL_INT23 (0x00800000) +#define INTC_IPRL_INT24 (0x01000000) +#define INTC_IPRL_INT25 (0x02000000) +#define INTC_IPRL_INT26 (0x04000000) +#define INTC_IPRL_INT27 (0x08000000) +#define INTC_IPRL_INT28 (0x10000000) +#define INTC_IPRL_INT29 (0x20000000) +#define INTC_IPRL_INT30 (0x40000000) +#define INTC_IPRL_INT31 (0x80000000) + +/* Bit definitions and macros for IMRH */ +#define INTC_IMRH_INT_MASK32 (0x00000001) +#define INTC_IMRH_INT_MASK33 (0x00000002) +#define INTC_IMRH_INT_MASK34 (0x00000004) +#define INTC_IMRH_INT_MASK35 (0x00000008) +#define INTC_IMRH_INT_MASK36 (0x00000010) +#define INTC_IMRH_INT_MASK37 (0x00000020) +#define INTC_IMRH_INT_MASK38 (0x00000040) +#define INTC_IMRH_INT_MASK39 (0x00000080) +#define INTC_IMRH_INT_MASK40 (0x00000100) +#define INTC_IMRH_INT_MASK41 (0x00000200) +#define INTC_IMRH_INT_MASK42 (0x00000400) +#define INTC_IMRH_INT_MASK43 (0x00000800) +#define INTC_IMRH_INT_MASK44 (0x00001000) +#define INTC_IMRH_INT_MASK45 (0x00002000) +#define INTC_IMRH_INT_MASK46 (0x00004000) +#define INTC_IMRH_INT_MASK47 (0x00008000) +#define INTC_IMRH_INT_MASK48 (0x00010000) +#define INTC_IMRH_INT_MASK49 (0x00020000) +#define INTC_IMRH_INT_MASK50 (0x00040000) +#define INTC_IMRH_INT_MASK51 (0x00080000) +#define INTC_IMRH_INT_MASK52 (0x00100000) +#define INTC_IMRH_INT_MASK53 (0x00200000) +#define INTC_IMRH_INT_MASK54 (0x00400000) +#define INTC_IMRH_INT_MASK55 (0x00800000) +#define INTC_IMRH_INT_MASK56 (0x01000000) +#define INTC_IMRH_INT_MASK57 (0x02000000) +#define INTC_IMRH_INT_MASK58 (0x04000000) +#define INTC_IMRH_INT_MASK59 (0x08000000) +#define INTC_IMRH_INT_MASK60 (0x10000000) +#define INTC_IMRH_INT_MASK61 (0x20000000) +#define INTC_IMRH_INT_MASK62 (0x40000000) +#define INTC_IMRH_INT_MASK63 (0x80000000) + +/* Bit definitions and macros for IMRL */ +#define INTC_IMRL_INT_MASK0 (0x00000001) +#define INTC_IMRL_INT_MASK1 (0x00000002) +#define INTC_IMRL_INT_MASK2 (0x00000004) +#define INTC_IMRL_INT_MASK3 (0x00000008) +#define INTC_IMRL_INT_MASK4 (0x00000010) +#define INTC_IMRL_INT_MASK5 (0x00000020) +#define INTC_IMRL_INT_MASK6 (0x00000040) +#define INTC_IMRL_INT_MASK7 (0x00000080) +#define INTC_IMRL_INT_MASK8 (0x00000100) +#define INTC_IMRL_INT_MASK9 (0x00000200) +#define INTC_IMRL_INT_MASK10 (0x00000400) +#define INTC_IMRL_INT_MASK11 (0x00000800) +#define INTC_IMRL_INT_MASK12 (0x00001000) +#define INTC_IMRL_INT_MASK13 (0x00002000) +#define INTC_IMRL_INT_MASK14 (0x00004000) +#define INTC_IMRL_INT_MASK15 (0x00008000) +#define INTC_IMRL_INT_MASK16 (0x00010000) +#define INTC_IMRL_INT_MASK17 (0x00020000) +#define INTC_IMRL_INT_MASK18 (0x00040000) +#define INTC_IMRL_INT_MASK19 (0x00080000) +#define INTC_IMRL_INT_MASK20 (0x00100000) +#define INTC_IMRL_INT_MASK21 (0x00200000) +#define INTC_IMRL_INT_MASK22 (0x00400000) +#define INTC_IMRL_INT_MASK23 (0x00800000) +#define INTC_IMRL_INT_MASK24 (0x01000000) +#define INTC_IMRL_INT_MASK25 (0x02000000) +#define INTC_IMRL_INT_MASK26 (0x04000000) +#define INTC_IMRL_INT_MASK27 (0x08000000) +#define INTC_IMRL_INT_MASK28 (0x10000000) +#define INTC_IMRL_INT_MASK29 (0x20000000) +#define INTC_IMRL_INT_MASK30 (0x40000000) +#define INTC_IMRL_INT_MASK31 (0x80000000) + +/* Bit definitions and macros for INTFRCH */ +#define INTC_INTFRCH_INTFRC32 (0x00000001) +#define INTC_INTFRCH_INTFRC33 (0x00000002) +#define INTC_INTFRCH_INTFRC34 (0x00000004) +#define INTC_INTFRCH_INTFRC35 (0x00000008) +#define INTC_INTFRCH_INTFRC36 (0x00000010) +#define INTC_INTFRCH_INTFRC37 (0x00000020) +#define INTC_INTFRCH_INTFRC38 (0x00000040) +#define INTC_INTFRCH_INTFRC39 (0x00000080) +#define INTC_INTFRCH_INTFRC40 (0x00000100) +#define INTC_INTFRCH_INTFRC41 (0x00000200) +#define INTC_INTFRCH_INTFRC42 (0x00000400) +#define INTC_INTFRCH_INTFRC43 (0x00000800) +#define INTC_INTFRCH_INTFRC44 (0x00001000) +#define INTC_INTFRCH_INTFRC45 (0x00002000) +#define INTC_INTFRCH_INTFRC46 (0x00004000) +#define INTC_INTFRCH_INTFRC47 (0x00008000) +#define INTC_INTFRCH_INTFRC48 (0x00010000) +#define INTC_INTFRCH_INTFRC49 (0x00020000) +#define INTC_INTFRCH_INTFRC50 (0x00040000) +#define INTC_INTFRCH_INTFRC51 (0x00080000) +#define INTC_INTFRCH_INTFRC52 (0x00100000) +#define INTC_INTFRCH_INTFRC53 (0x00200000) +#define INTC_INTFRCH_INTFRC54 (0x00400000) +#define INTC_INTFRCH_INTFRC55 (0x00800000) +#define INTC_INTFRCH_INTFRC56 (0x01000000) +#define INTC_INTFRCH_INTFRC57 (0x02000000) +#define INTC_INTFRCH_INTFRC58 (0x04000000) +#define INTC_INTFRCH_INTFRC59 (0x08000000) +#define INTC_INTFRCH_INTFRC60 (0x10000000) +#define INTC_INTFRCH_INTFRC61 (0x20000000) +#define INTC_INTFRCH_INTFRC62 (0x40000000) +#define INTC_INTFRCH_INTFRC63 (0x80000000) + +/* Bit definitions and macros for INTFRCL */ +#define INTC_INTFRCL_INTFRC0 (0x00000001) +#define INTC_INTFRCL_INTFRC1 (0x00000002) +#define INTC_INTFRCL_INTFRC2 (0x00000004) +#define INTC_INTFRCL_INTFRC3 (0x00000008) +#define INTC_INTFRCL_INTFRC4 (0x00000010) +#define INTC_INTFRCL_INTFRC5 (0x00000020) +#define INTC_INTFRCL_INTFRC6 (0x00000040) +#define INTC_INTFRCL_INTFRC7 (0x00000080) +#define INTC_INTFRCL_INTFRC8 (0x00000100) +#define INTC_INTFRCL_INTFRC9 (0x00000200) +#define INTC_INTFRCL_INTFRC10 (0x00000400) +#define INTC_INTFRCL_INTFRC11 (0x00000800) +#define INTC_INTFRCL_INTFRC12 (0x00001000) +#define INTC_INTFRCL_INTFRC13 (0x00002000) +#define INTC_INTFRCL_INTFRC14 (0x00004000) +#define INTC_INTFRCL_INTFRC15 (0x00008000) +#define INTC_INTFRCL_INTFRC16 (0x00010000) +#define INTC_INTFRCL_INTFRC17 (0x00020000) +#define INTC_INTFRCL_INTFRC18 (0x00040000) +#define INTC_INTFRCL_INTFRC19 (0x00080000) +#define INTC_INTFRCL_INTFRC20 (0x00100000) +#define INTC_INTFRCL_INTFRC21 (0x00200000) +#define INTC_INTFRCL_INTFRC22 (0x00400000) +#define INTC_INTFRCL_INTFRC23 (0x00800000) +#define INTC_INTFRCL_INTFRC24 (0x01000000) +#define INTC_INTFRCL_INTFRC25 (0x02000000) +#define INTC_INTFRCL_INTFRC26 (0x04000000) +#define INTC_INTFRCL_INTFRC27 (0x08000000) +#define INTC_INTFRCL_INTFRC28 (0x10000000) +#define INTC_INTFRCL_INTFRC29 (0x20000000) +#define INTC_INTFRCL_INTFRC30 (0x40000000) +#define INTC_INTFRCL_INTFRC31 (0x80000000) + +/* Bit definitions and macros for ICONFIG */ +#define INTC_ICONFIG_EMASK (0x0020) +#define INTC_ICONFIG_ELVLPRI1 (0x0200) +#define INTC_ICONFIG_ELVLPRI2 (0x0400) +#define INTC_ICONFIG_ELVLPRI3 (0x0800) +#define INTC_ICONFIG_ELVLPRI4 (0x1000) +#define INTC_ICONFIG_ELVLPRI5 (0x2000) +#define INTC_ICONFIG_ELVLPRI6 (0x4000) +#define INTC_ICONFIG_ELVLPRI7 (0x8000) + +/* Bit definitions and macros for SIMR */ +#define INTC_SIMR_SIMR(x) (((x)&0x7F)) + +/* Bit definitions and macros for CIMR */ +#define INTC_CIMR_CIMR(x) (((x)&0x7F)) + +/* Bit definitions and macros for CLMASK */ +#define INTC_CLMASK_CLMASK(x) (((x)&0x0F)) + +/* Bit definitions and macros for SLMASK */ +#define INTC_SLMASK_SLMASK(x) (((x)&0x0F)) + +/* Bit definitions and macros for ICR group */ +#define INTC_ICR_IL(x) (((x)&0x07)) + +/********************************************************************* +* DMA Serial Peripheral Interface (DSPI) +*********************************************************************/ + +/* Bit definitions and macros for DMCR */ +#define DSPI_DMCR_HALT (0x00000001) +#define DSPI_DMCR_SMPL_PT(x) (((x)&0x00000003)<<8) +#define DSPI_DMCR_CRXF (0x00000400) +#define DSPI_DMCR_CTXF (0x00000800) +#define DSPI_DMCR_DRXF (0x00001000) +#define DSPI_DMCR_DTXF (0x00002000) +#define DSPI_DMCR_CSIS0 (0x00010000) +#define DSPI_DMCR_CSIS2 (0x00040000) +#define DSPI_DMCR_CSIS3 (0x00080000) +#define DSPI_DMCR_CSIS5 (0x00200000) +#define DSPI_DMCR_ROOE (0x01000000) +#define DSPI_DMCR_PCSSE (0x02000000) +#define DSPI_DMCR_MTFE (0x04000000) +#define DSPI_DMCR_FRZ (0x08000000) +#define DSPI_DMCR_DCONF(x) (((x)&0x00000003)<<28) +#define DSPI_DMCR_CSCK (0x40000000) +#define DSPI_DMCR_MSTR (0x80000000) + +/* Bit definitions and macros for DTCR */ +#define DSPI_DTCR_SPI_TCNT(x) (((x)&0x0000FFFF)<<16) + +/* Bit definitions and macros for DCTAR group */ +#define DSPI_DCTAR_BR(x) (((x)&0x0000000F)) +#define DSPI_DCTAR_DT(x) (((x)&0x0000000F)<<4) +#define DSPI_DCTAR_ASC(x) (((x)&0x0000000F)<<8) +#define DSPI_DCTAR_CSSCK(x) (((x)&0x0000000F)<<12) +#define DSPI_DCTAR_PBR(x) (((x)&0x00000003)<<16) +#define DSPI_DCTAR_PDT(x) (((x)&0x00000003)<<18) +#define DSPI_DCTAR_PASC(x) (((x)&0x00000003)<<20) +#define DSPI_DCTAR_PCSSCK(x) (((x)&0x00000003)<<22) +#define DSPI_DCTAR_LSBFE (0x01000000) +#define DSPI_DCTAR_CPHA (0x02000000) +#define DSPI_DCTAR_CPOL (0x04000000) +#define DSPI_DCTAR_TRSZ(x) (((x)&0x0000000F)<<27) +#define DSPI_DCTAR_PCSSCK_1CLK (0x00000000) +#define DSPI_DCTAR_PCSSCK_3CLK (0x00400000) +#define DSPI_DCTAR_PCSSCK_5CLK (0x00800000) +#define DSPI_DCTAR_PCSSCK_7CLK (0x00A00000) +#define DSPI_DCTAR_PASC_1CLK (0x00000000) +#define DSPI_DCTAR_PASC_3CLK (0x00100000) +#define DSPI_DCTAR_PASC_5CLK (0x00200000) +#define DSPI_DCTAR_PASC_7CLK (0x00300000) +#define DSPI_DCTAR_PDT_1CLK (0x00000000) +#define DSPI_DCTAR_PDT_3CLK (0x00040000) +#define DSPI_DCTAR_PDT_5CLK (0x00080000) +#define DSPI_DCTAR_PDT_7CLK (0x000A0000) +#define DSPI_DCTAR_PBR_1CLK (0x00000000) +#define DSPI_DCTAR_PBR_3CLK (0x00010000) +#define DSPI_DCTAR_PBR_5CLK (0x00020000) +#define DSPI_DCTAR_PBR_7CLK (0x00030000) + +/* Bit definitions and macros for DSR */ +#define DSPI_DSR_RXPTR(x) (((x)&0x0000000F)) +#define DSPI_DSR_RXCTR(x) (((x)&0x0000000F)<<4) +#define DSPI_DSR_TXPTR(x) (((x)&0x0000000F)<<8) +#define DSPI_DSR_TXCTR(x) (((x)&0x0000000F)<<12) +#define DSPI_DSR_RFDF (0x00020000) +#define DSPI_DSR_RFOF (0x00080000) +#define DSPI_DSR_TFFF (0x02000000) +#define DSPI_DSR_TFUF (0x08000000) +#define DSPI_DSR_EOQF (0x10000000) +#define DSPI_DSR_TXRXS (0x40000000) +#define DSPI_DSR_TCF (0x80000000) + +/* Bit definitions and macros for DIRSR */ +#define DSPI_DIRSR_RFDFS (0x00010000) +#define DSPI_DIRSR_RFDFE (0x00020000) +#define DSPI_DIRSR_RFOFE (0x00080000) +#define DSPI_DIRSR_TFFFS (0x01000000) +#define DSPI_DIRSR_TFFFE (0x02000000) +#define DSPI_DIRSR_TFUFE (0x08000000) +#define DSPI_DIRSR_EOQFE (0x10000000) +#define DSPI_DIRSR_TCFE (0x80000000) + +/* Bit definitions and macros for DTFR */ +#define DSPI_DTFR_TXDATA(x) (((x)&0x0000FFFF)) +#define DSPI_DTFR_CS0 (0x00010000) +#define DSPI_DTFR_CS2 (0x00040000) +#define DSPI_DTFR_CS3 (0x00080000) +#define DSPI_DTFR_CS5 (0x00200000) +#define DSPI_DTFR_CTCNT (0x04000000) +#define DSPI_DTFR_EOQ (0x08000000) +#define DSPI_DTFR_CTAS(x) (((x)&0x00000007)<<28) +#define DSPI_DTFR_CONT (0x80000000) + +/* Bit definitions and macros for DRFR */ +#define DSPI_DRFR_RXDATA(x) (((x)&0x0000FFFF)) + +/* Bit definitions and macros for DTFDR group */ +#define DSPI_DTFDR_TXDATA(x) (((x)&0x0000FFFF)) +#define DSPI_DTFDR_TXCMD(x) (((x)&0x0000FFFF)<<16) + +/* Bit definitions and macros for DRFDR group */ +#define DSPI_DRFDR_RXDATA(x) (((x)&0x0000FFFF)) + +/********************************************************************* +* Edge Port Module (EPORT) +*********************************************************************/ + +/* Bit definitions and macros for EPPAR */ +#define EPORT_EPPAR_EPPA1(x) (((x)&0x0003)<<2) +#define EPORT_EPPAR_EPPA2(x) (((x)&0x0003)<<4) +#define EPORT_EPPAR_EPPA3(x) (((x)&0x0003)<<6) +#define EPORT_EPPAR_EPPA4(x) (((x)&0x0003)<<8) +#define EPORT_EPPAR_EPPA5(x) (((x)&0x0003)<<10) +#define EPORT_EPPAR_EPPA6(x) (((x)&0x0003)<<12) +#define EPORT_EPPAR_EPPA7(x) (((x)&0x0003)<<14) +#define EPORT_EPPAR_LEVEL (0) +#define EPORT_EPPAR_RISING (1) +#define EPORT_EPPAR_FALLING (2) +#define EPORT_EPPAR_BOTH (3) +#define EPORT_EPPAR_EPPA7_LEVEL (0x0000) +#define EPORT_EPPAR_EPPA7_RISING (0x4000) +#define EPORT_EPPAR_EPPA7_FALLING (0x8000) +#define EPORT_EPPAR_EPPA7_BOTH (0xC000) +#define EPORT_EPPAR_EPPA6_LEVEL (0x0000) +#define EPORT_EPPAR_EPPA6_RISING (0x1000) +#define EPORT_EPPAR_EPPA6_FALLING (0x2000) +#define EPORT_EPPAR_EPPA6_BOTH (0x3000) +#define EPORT_EPPAR_EPPA5_LEVEL (0x0000) +#define EPORT_EPPAR_EPPA5_RISING (0x0400) +#define EPORT_EPPAR_EPPA5_FALLING (0x0800) +#define EPORT_EPPAR_EPPA5_BOTH (0x0C00) +#define EPORT_EPPAR_EPPA4_LEVEL (0x0000) +#define EPORT_EPPAR_EPPA4_RISING (0x0100) +#define EPORT_EPPAR_EPPA4_FALLING (0x0200) +#define EPORT_EPPAR_EPPA4_BOTH (0x0300) +#define EPORT_EPPAR_EPPA3_LEVEL (0x0000) +#define EPORT_EPPAR_EPPA3_RISING (0x0040) +#define EPORT_EPPAR_EPPA3_FALLING (0x0080) +#define EPORT_EPPAR_EPPA3_BOTH (0x00C0) +#define EPORT_EPPAR_EPPA2_LEVEL (0x0000) +#define EPORT_EPPAR_EPPA2_RISING (0x0010) +#define EPORT_EPPAR_EPPA2_FALLING (0x0020) +#define EPORT_EPPAR_EPPA2_BOTH (0x0030) +#define EPORT_EPPAR_EPPA1_LEVEL (0x0000) +#define EPORT_EPPAR_EPPA1_RISING (0x0004) +#define EPORT_EPPAR_EPPA1_FALLING (0x0008) +#define EPORT_EPPAR_EPPA1_BOTH (0x000C) + +/* Bit definitions and macros for EPDDR */ +#define EPORT_EPDDR_EPDD1 (0x02) +#define EPORT_EPDDR_EPDD2 (0x04) +#define EPORT_EPDDR_EPDD3 (0x08) +#define EPORT_EPDDR_EPDD4 (0x10) +#define EPORT_EPDDR_EPDD5 (0x20) +#define EPORT_EPDDR_EPDD6 (0x40) +#define EPORT_EPDDR_EPDD7 (0x80) + +/* Bit definitions and macros for EPIER */ +#define EPORT_EPIER_EPIE1 (0x02) +#define EPORT_EPIER_EPIE2 (0x04) +#define EPORT_EPIER_EPIE3 (0x08) +#define EPORT_EPIER_EPIE4 (0x10) +#define EPORT_EPIER_EPIE5 (0x20) +#define EPORT_EPIER_EPIE6 (0x40) +#define EPORT_EPIER_EPIE7 (0x80) + +/* Bit definitions and macros for EPDR */ +#define EPORT_EPDR_EPD1 (0x02) +#define EPORT_EPDR_EPD2 (0x04) +#define EPORT_EPDR_EPD3 (0x08) +#define EPORT_EPDR_EPD4 (0x10) +#define EPORT_EPDR_EPD5 (0x20) +#define EPORT_EPDR_EPD6 (0x40) +#define EPORT_EPDR_EPD7 (0x80) + +/* Bit definitions and macros for EPPDR */ +#define EPORT_EPPDR_EPPD1 (0x02) +#define EPORT_EPPDR_EPPD2 (0x04) +#define EPORT_EPPDR_EPPD3 (0x08) +#define EPORT_EPPDR_EPPD4 (0x10) +#define EPORT_EPPDR_EPPD5 (0x20) +#define EPORT_EPPDR_EPPD6 (0x40) +#define EPORT_EPPDR_EPPD7 (0x80) + +/* Bit definitions and macros for EPFR */ +#define EPORT_EPFR_EPF1 (0x02) +#define EPORT_EPFR_EPF2 (0x04) +#define EPORT_EPFR_EPF3 (0x08) +#define EPORT_EPFR_EPF4 (0x10) +#define EPORT_EPFR_EPF5 (0x20) +#define EPORT_EPFR_EPF6 (0x40) +#define EPORT_EPFR_EPF7 (0x80) + +/********************************************************************* +* Watchdog Timer Modules (WTM) +*********************************************************************/ + +/* Bit definitions and macros for WCR */ +#define WTM_WCR_EN (0x0001) +#define WTM_WCR_HALTED (0x0002) +#define WTM_WCR_DOZE (0x0004) +#define WTM_WCR_WAIT (0x0008) + +/********************************************************************* +* Serial Boot Facility (SBF) +*********************************************************************/ + +/* Bit definitions and macros for SBFCR */ +#define SBF_SBFCR_BLDIV(x) (((x)&0x000F)) /* Boot loader clock divider */ +#define SBF_SBFCR_FR (0x0010) /* Fast read */ + +/********************************************************************* +* Reset Controller Module (RCM) +*********************************************************************/ + +/* Bit definitions and macros for RCR */ +#define RCM_RCR_FRCRSTOUT (0x40) +#define RCM_RCR_SOFTRST (0x80) + +/* Bit definitions and macros for RSR */ +#define RCM_RSR_LOL (0x01) +#define RCM_RSR_WDR_CORE (0x02) +#define RCM_RSR_EXT (0x04) +#define RCM_RSR_POR (0x08) +#define RCM_RSR_SOFT (0x20) + +/********************************************************************* +* Chip Configuration Module (CCM) +*********************************************************************/ + +/* Bit definitions and macros for CCR_360 */ +#define CCM_CCR_360_PLLMULT2(x) (((x)&0x0003)) /* 2-Bit PLL clock mode */ +#define CCM_CCR_360_PCISLEW (0x0004) /* PCI pad slew rate mode */ +#define CCM_CCR_360_PCIMODE (0x0008) /* PCI host/agent mode */ +#define CCM_CCR_360_PLLMODE (0x0010) /* PLL Mode */ +#define CCM_CCR_360_FBCONFIG(x) (((x)&0x0007)<<5) /* Flexbus/PCI port size configuration */ +#define CCM_CCR_360_PLLMULT3(x) (((x)&0x0007)) /* 3-Bit PLL Clock Mode */ +#define CCM_CCR_360_OSCMODE (0x0008) /* Oscillator Clock Mode */ +#define CCM_CCR_360_FBCONFIG_MASK (0x00E0) +#define CCM_CCR_360_PLLMULT2_MASK (0x0003) +#define CCM_CCR_360_PLLMULT3_MASK (0x0007) +#define CCM_CCR_360_FBCONFIG_NM_NP_32 (0x0000) +#define CCM_CCR_360_FBCONFIG_NM_NP_8 (0x0020) +#define CCM_CCR_360_FBCONFIG_NM_NP_16 (0x0040) +#define CCM_CCR_360_FBCONFIG_M_P_16 (0x0060) +#define CCM_CCR_360_FBCONFIG_M_NP_32 (0x0080) +#define CCM_CCR_360_FBCONFIG_M_NP_8 (0x00A0) +#define CCM_CCR_360_FBCONFIG_M_NP_16 (0x00C0) +#define CCM_CCR_360_FBCONFIG_M_P_8 (0x00E0) +#define CCM_CCR_360_PLLMULT2_12X (0x0000) +#define CCM_CCR_360_PLLMULT2_6X (0x0001) +#define CCM_CCR_360_PLLMULT2_16X (0x0002) +#define CCM_CCR_360_PLLMULT2_8X (0x0003) +#define CCM_CCR_360_PLLMULT3_20X (0x0000) +#define CCM_CCR_360_PLLMULT3_10X (0x0001) +#define CCM_CCR_360_PLLMULT3_24X (0x0002) +#define CCM_CCR_360_PLLMULT3_18X (0x0003) +#define CCM_CCR_360_PLLMULT3_12X (0x0004) +#define CCM_CCR_360_PLLMULT3_6X (0x0005) +#define CCM_CCR_360_PLLMULT3_16X (0x0006) +#define CCM_CCR_360_PLLMULT3_8X (0x0007) + +/* Bit definitions and macros for CCR_256 */ +#define CCM_CCR_256_PLLMULT3(x) (((x)&0x0007)) /* 3-Bit PLL clock mode */ +#define CCM_CCR_256_OSCMODE (0x0008) /* Oscillator clock mode */ +#define CCM_CCR_256_PLLMODE (0x0010) /* PLL Mode */ +#define CCM_CCR_256_FBCONFIG(x) (((x)&0x0007)<<5) /* Flexbus/PCI port size configuration */ +#define CCM_CCR_256_FBCONFIG_MASK (0x00E0) +#define CCM_CCR_256_FBCONFIG_NM_32 (0x0000) +#define CCM_CCR_256_FBCONFIG_NM_8 (0x0020) +#define CCM_CCR_256_FBCONFIG_NM_16 (0x0040) +#define CCM_CCR_256_FBCONFIG_M_32 (0x0080) +#define CCM_CCR_256_FBCONFIG_M_8 (0x00A0) +#define CCM_CCR_256_FBCONFIG_M_16 (0x00C0) +#define CCM_CCR_256_PLLMULT3_MASK (0x0007) +#define CCM_CCR_256_PLLMULT3_20X (0x0000) +#define CCM_CCR_256_PLLMULT3_10X (0x0001) +#define CCM_CCR_256_PLLMULT3_24X (0x0002) +#define CCM_CCR_256_PLLMULT3_18X (0x0003) +#define CCM_CCR_256_PLLMULT3_12X (0x0004) +#define CCM_CCR_256_PLLMULT3_6X (0x0005) +#define CCM_CCR_256_PLLMULT3_16X (0x0006) +#define CCM_CCR_256_PLLMULT3_8X (0x0007) + +/* Bit definitions and macros for RCON_360 */ +#define CCM_RCON_360_PLLMULT(x) (((x)&0x0003)) /* PLL clock mode */ +#define CCM_RCON_360_PCISLEW (0x0004) /* PCI pad slew rate mode */ +#define CCM_RCON_360_PCIMODE (0x0008) /* PCI host/agent mode */ +#define CCM_RCON_360_PLLMODE (0x0010) /* PLL Mode */ +#define CCM_RCON_360_FBCONFIG(x) (((x)&0x0007)<<5) /* Flexbus/PCI port size configuration */ + +/* Bit definitions and macros for RCON_256 */ +#define CCM_RCON_256_PLLMULT(x) (((x)&0x0007)) /* PLL clock mode */ +#define CCM_RCON_256_OSCMODE (0x0008) /* Oscillator clock mode */ +#define CCM_RCON_256_PLLMODE (0x0010) /* PLL Mode */ +#define CCM_RCON_256_FBCONFIG(x) (((x)&0x0007)<<5) /* Flexbus/PCI port size configuration */ + +/* Bit definitions and macros for CIR */ +#define CCM_CIR_PRN(x) (((x)&0x003F)) /* Part revision number */ +#define CCM_CIR_PIN(x) (((x)&0x03FF)<<6) /* Part identification number */ +#define CCM_CIR_PIN_MASK (0xFFC0) +#define CCM_CIR_PRN_MASK (0x003F) +#define CCM_CIR_PIN_MCF54450 (0x4F<<6) +#define CCM_CIR_PIN_MCF54451 (0x4D<<6) +#define CCM_CIR_PIN_MCF54452 (0x4B<<6) +#define CCM_CIR_PIN_MCF54453 (0x49<<6) +#define CCM_CIR_PIN_MCF54454 (0x4A<<6) +#define CCM_CIR_PIN_MCF54455 (0x48<<6) + +/* Bit definitions and macros for MISCCR */ +#define CCM_MISCCR_USBSRC (0x0001) /* USB clock source */ +#define CCM_MISCCR_USBOC (0x0002) /* USB VBUS over-current sense polarity */ +#define CCM_MISCCR_USBPUE (0x0004) /* USB transceiver pull-up enable */ +#define CCM_MISCCR_SSISRC (0x0010) /* SSI clock source */ +#define CCM_MISCCR_TIMDMA (0x0020) /* Timer DMA mux selection */ +#define CCM_MISCCR_SSIPUS (0x0040) /* SSI RXD/TXD pull select */ +#define CCM_MISCCR_SSIPUE (0x0080) /* SSI RXD/TXD pull enable */ +#define CCM_MISCCR_BMT(x) (((x)&0x0007)<<8) /* Bus monitor timing field */ +#define CCM_MISCCR_BME (0x0800) /* Bus monitor external enable bit */ +#define CCM_MISCCR_LIMP (0x1000) /* Limp mode enable */ +#define CCM_MISCCR_BMT_65536 (0) +#define CCM_MISCCR_BMT_32768 (1) +#define CCM_MISCCR_BMT_16384 (2) +#define CCM_MISCCR_BMT_8192 (3) +#define CCM_MISCCR_BMT_4096 (4) +#define CCM_MISCCR_BMT_2048 (5) +#define CCM_MISCCR_BMT_1024 (6) +#define CCM_MISCCR_BMT_512 (7) +#define CCM_MISCCR_SSIPUS_UP (1) +#define CCM_MISCCR_SSIPUS_DOWN (0) +#define CCM_MISCCR_TIMDMA_TIM (1) +#define CCM_MISCCR_TIMDMA_SSI (0) +#define CCM_MISCCR_SSISRC_CLKIN (0) +#define CCM_MISCCR_SSISRC_PLL (1) +#define CCM_MISCCR_USBOC_ACTHI (0) +#define CCM_MISCCR_USBOV_ACTLO (1) +#define CCM_MISCCR_USBSRC_CLKIN (0) +#define CCM_MISCCR_USBSRC_PLL (1) + +/* Bit definitions and macros for CDR */ +#define CCM_CDR_SSIDIV(x) (((x)&0x00FF)) /* SSI oversampling clock divider */ +#define CCM_CDR_LPDIV(x) (((x)&0x000F)<<8) /* Low power clock divider */ + +/* Bit definitions and macros for UOCSR */ +#define CCM_UOCSR_XPDE (0x0001) /* On-chip transceiver pull-down enable */ +#define CCM_UOCSR_UOMIE (0x0002) /* USB OTG misc interrupt enable */ +#define CCM_UOCSR_WKUP (0x0004) /* USB OTG controller wake-up event */ +#define CCM_UOCSR_PWRFLT (0x0008) /* VBUS power fault */ +#define CCM_UOCSR_SEND (0x0010) /* Session end */ +#define CCM_UOCSR_VVLD (0x0020) /* VBUS valid indicator */ +#define CCM_UOCSR_BVLD (0x0040) /* B-peripheral valid indicator */ +#define CCM_UOCSR_AVLD (0x0080) /* A-peripheral valid indicator */ +#define CCM_UOCSR_DPPU (0x0100) /* D+ pull-up for FS enabled (read-only) */ +#define CCM_UOCSR_DCR_VBUS (0x0200) /* VBUS discharge resistor enabled (read-only) */ +#define CCM_UOCSR_CRG_VBUS (0x0400) /* VBUS charge resistor enabled (read-only) */ +#define CCM_UOCSR_DMPD (0x1000) /* D- 15Kohm pull-down (read-only) */ +#define CCM_UOCSR_DPPD (0x2000) /* D+ 15Kohm pull-down (read-only) */ + +/********************************************************************* +* General Purpose I/O Module (GPIO) +*********************************************************************/ + +/* Bit definitions and macros for PAR_FEC */ +#define GPIO_PAR_FEC_FEC0(x) (((x)&0x07)) +#define GPIO_PAR_FEC_FEC1(x) (((x)&0x07)<<4) +#define GPIO_PAR_FEC_FEC1_MASK (0x8F) +#define GPIO_PAR_FEC_FEC1_MII (0x70) +#define GPIO_PAR_FEC_FEC1_RMII_GPIO (0x30) +#define GPIO_PAR_FEC_FEC1_RMII_ATA (0x20) +#define GPIO_PAR_FEC_FEC1_ATA (0x10) +#define GPIO_PAR_FEC_FEC1_GPIO (0x00) +#define GPIO_PAR_FEC_FEC0_MASK (0xF8) +#define GPIO_PAR_FEC_FEC0_MII (0x07) +#define GPIO_PAR_FEC_FEC0_RMII_GPIO (0x03) +#define GPIO_PAR_FEC_FEC0_RMII_ATA (0x02) +#define GPIO_PAR_FEC_FEC0_ATA (0x01) +#define GPIO_PAR_FEC_FEC0_GPIO (0x00) + +/* Bit definitions and macros for PAR_DMA */ +#define GPIO_PAR_DMA_DREQ0 (0x01) +#define GPIO_PAR_DMA_DACK0(x) (((x)&0x03)<<2) +#define GPIO_PAR_DMA_DREQ1(x) (((x)&0x03)<<4) +#define GPIO_PAR_DMA_DACK1(x) (((x)&0x03)<<6) +#define GPIO_PAR_DMA_DACK1_MASK (0x3F) +#define GPIO_PAR_DMA_DACK1_DACK1 (0xC0) +#define GPIO_PAR_DMA_DACK1_ULPI_DIR (0x40) +#define GPIO_PAR_DMA_DACK1_GPIO (0x00) +#define GPIO_PAR_DMA_DREQ1_MASK (0xCF) +#define GPIO_PAR_DMA_DREQ1_DREQ1 (0x30) +#define GPIO_PAR_DMA_DREQ1_USB_CLKIN (0x10) +#define GPIO_PAR_DMA_DREQ1_GPIO (0x00) +#define GPIO_PAR_DMA_DACK0_MASK (0xF3) +#define GPIO_PAR_DMA_DACK0_DACK1 (0x0C) +#define GPIO_PAR_DMA_DACK0_ULPI_DIR (0x04) +#define GPIO_PAR_DMA_DACK0_GPIO (0x00) +#define GPIO_PAR_DMA_DREQ0_DREQ0 (0x01) +#define GPIO_PAR_DMA_DREQ0_GPIO (0x00) + +/* Bit definitions and macros for PAR_FBCTL */ +#define GPIO_PAR_FBCTL_TS(x) (((x)&0x03)<<3) +#define GPIO_PAR_FBCTL_RW (0x20) +#define GPIO_PAR_FBCTL_TA (0x40) +#define GPIO_PAR_FBCTL_OE (0x80) +#define GPIO_PAR_FBCTL_OE_OE (0x80) +#define GPIO_PAR_FBCTL_OE_GPIO (0x00) +#define GPIO_PAR_FBCTL_TA_TA (0x40) +#define GPIO_PAR_FBCTL_TA_GPIO (0x00) +#define GPIO_PAR_FBCTL_RW_RW (0x20) +#define GPIO_PAR_FBCTL_RW_GPIO (0x00) +#define GPIO_PAR_FBCTL_TS_MASK (0xE7) +#define GPIO_PAR_FBCTL_TS_TS (0x18) +#define GPIO_PAR_FBCTL_TS_ALE (0x10) +#define GPIO_PAR_FBCTL_TS_TBST (0x08) +#define GPIO_PAR_FBCTL_TS_GPIO (0x80) + +/* Bit definitions and macros for PAR_DSPI */ +#define GPIO_PAR_DSPI_SCK (0x01) +#define GPIO_PAR_DSPI_SOUT (0x02) +#define GPIO_PAR_DSPI_SIN (0x04) +#define GPIO_PAR_DSPI_PCS0 (0x08) +#define GPIO_PAR_DSPI_PCS1 (0x10) +#define GPIO_PAR_DSPI_PCS2 (0x20) +#define GPIO_PAR_DSPI_PCS5 (0x40) +#define GPIO_PAR_DSPI_PCS5_PCS5 (0x40) +#define GPIO_PAR_DSPI_PCS5_GPIO (0x00) +#define GPIO_PAR_DSPI_PCS2_PCS2 (0x20) +#define GPIO_PAR_DSPI_PCS2_GPIO (0x00) +#define GPIO_PAR_DSPI_PCS1_PCS1 (0x10) +#define GPIO_PAR_DSPI_PCS1_GPIO (0x00) +#define GPIO_PAR_DSPI_PCS0_PCS0 (0x08) +#define GPIO_PAR_DSPI_PCS0_GPIO (0x00) +#define GPIO_PAR_DSPI_SIN_SIN (0x04) +#define GPIO_PAR_DSPI_SIN_GPIO (0x00) +#define GPIO_PAR_DSPI_SOUT_SOUT (0x02) +#define GPIO_PAR_DSPI_SOUT_GPIO (0x00) +#define GPIO_PAR_DSPI_SCK_SCK (0x01) +#define GPIO_PAR_DSPI_SCK_GPIO (0x00) + +/* Bit definitions and macros for PAR_BE */ +#define GPIO_PAR_BE_BS0 (0x01) +#define GPIO_PAR_BE_BS1 (0x04) +#define GPIO_PAR_BE_BS2(x) (((x)&0x03)<<4) +#define GPIO_PAR_BE_BS3(x) (((x)&0x03)<<6) +#define GPIO_PAR_BE_BE3_MASK (0x3F) +#define GPIO_PAR_BE_BE3_BE3 (0xC0) +#define GPIO_PAR_BE_BE3_TSIZ1 (0x80) +#define GPIO_PAR_BE_BE3_GPIO (0x00) +#define GPIO_PAR_BE_BE2_MASK (0xCF) +#define GPIO_PAR_BE_BE2_BE2 (0x30) +#define GPIO_PAR_BE_BE2_TSIZ0 (0x20) +#define GPIO_PAR_BE_BE2_GPIO (0x00) +#define GPIO_PAR_BE_BE1_BE1 (0x04) +#define GPIO_PAR_BE_BE1_GPIO (0x00) +#define GPIO_PAR_BE_BE0_BE0 (0x01) +#define GPIO_PAR_BE_BE0_GPIO (0x00) + +/* Bit definitions and macros for PAR_CS */ +#define GPIO_PAR_CS_CS1 (0x02) +#define GPIO_PAR_CS_CS2 (0x04) +#define GPIO_PAR_CS_CS3 (0x08) +#define GPIO_PAR_CS_CS3_CS3 (0x08) +#define GPIO_PAR_CS_CS3_GPIO (0x00) +#define GPIO_PAR_CS_CS2_CS2 (0x04) +#define GPIO_PAR_CS_CS2_GPIO (0x00) +#define GPIO_PAR_CS_CS1_CS1 (0x02) +#define GPIO_PAR_CS_CS1_GPIO (0x00) + +/* Bit definitions and macros for PAR_TIMER */ +#define GPIO_PAR_TIMER_T0IN(x) (((x)&0x03)) +#define GPIO_PAR_TIMER_T1IN(x) (((x)&0x03)<<2) +#define GPIO_PAR_TIMER_T2IN(x) (((x)&0x03)<<4) +#define GPIO_PAR_TIMER_T3IN(x) (((x)&0x03)<<6) +#define GPIO_PAR_TIMER_T3IN_MASK (0x3F) +#define GPIO_PAR_TIMER_T3IN_T3IN (0xC0) +#define GPIO_PAR_TIMER_T3IN_T3OUT (0x80) +#define GPIO_PAR_TIMER_T3IN_U2RXD (0x40) +#define GPIO_PAR_TIMER_T3IN_GPIO (0x00) +#define GPIO_PAR_TIMER_T2IN_MASK (0xCF) +#define GPIO_PAR_TIMER_T2IN_T2IN (0x30) +#define GPIO_PAR_TIMER_T2IN_T2OUT (0x20) +#define GPIO_PAR_TIMER_T2IN_U2TXD (0x10) +#define GPIO_PAR_TIMER_T2IN_GPIO (0x00) +#define GPIO_PAR_TIMER_T1IN_MASK (0xF3) +#define GPIO_PAR_TIMER_T1IN_T1IN (0x0C) +#define GPIO_PAR_TIMER_T1IN_T1OUT (0x08) +#define GPIO_PAR_TIMER_T1IN_U2CTS (0x04) +#define GPIO_PAR_TIMER_T1IN_GPIO (0x00) +#define GPIO_PAR_TIMER_T0IN_MASK (0xFC) +#define GPIO_PAR_TIMER_T0IN_T0IN (0x03) +#define GPIO_PAR_TIMER_T0IN_T0OUT (0x02) +#define GPIO_PAR_TIMER_T0IN_U2RTS (0x01) +#define GPIO_PAR_TIMER_T0IN_GPIO (0x00) + +/* Bit definitions and macros for PAR_USB */ +#define GPIO_PAR_USB_VBUSOC(x) (((x)&0x03)) +#define GPIO_PAR_USB_VBUSEN(x) (((x)&0x03)<<2) +#define GPIO_PAR_USB_VBUSEN_MASK (0xF3) +#define GPIO_PAR_USB_VBUSEN_VBUSEN (0x0C) +#define GPIO_PAR_USB_VBUSEN_USBPULLUP (0x08) +#define GPIO_PAR_USB_VBUSEN_ULPI_NXT (0x04) +#define GPIO_PAR_USB_VBUSEN_GPIO (0x00) +#define GPIO_PAR_USB_VBUSOC_MASK (0xFC) +#define GPIO_PAR_USB_VBUSOC_VBUSOC (0x03) +#define GPIO_PAR_USB_VBUSOC_ULPI_STP (0x01) +#define GPIO_PAR_USB_VBUSOC_GPIO (0x00) + +/* Bit definitions and macros for PAR_UART */ +#define GPIO_PAR_UART_U0TXD (0x01) +#define GPIO_PAR_UART_U0RXD (0x02) +#define GPIO_PAR_UART_U0RTS (0x04) +#define GPIO_PAR_UART_U0CTS (0x08) +#define GPIO_PAR_UART_U1TXD (0x10) +#define GPIO_PAR_UART_U1RXD (0x20) +#define GPIO_PAR_UART_U1RTS (0x40) +#define GPIO_PAR_UART_U1CTS (0x80) +#define GPIO_PAR_UART_U1CTS_U1CTS (0x80) +#define GPIO_PAR_UART_U1CTS_GPIO (0x00) +#define GPIO_PAR_UART_U1RTS_U1RTS (0x40) +#define GPIO_PAR_UART_U1RTS_GPIO (0x00) +#define GPIO_PAR_UART_U1RXD_U1RXD (0x20) +#define GPIO_PAR_UART_U1RXD_GPIO (0x00) +#define GPIO_PAR_UART_U1TXD_U1TXD (0x10) +#define GPIO_PAR_UART_U1TXD_GPIO (0x00) +#define GPIO_PAR_UART_U0CTS_U0CTS (0x08) +#define GPIO_PAR_UART_U0CTS_GPIO (0x00) +#define GPIO_PAR_UART_U0RTS_U0RTS (0x04) +#define GPIO_PAR_UART_U0RTS_GPIO (0x00) +#define GPIO_PAR_UART_U0RXD_U0RXD (0x02) +#define GPIO_PAR_UART_U0RXD_GPIO (0x00) +#define GPIO_PAR_UART_U0TXD_U0TXD (0x01) +#define GPIO_PAR_UART_U0TXD_GPIO (0x00) + +/* Bit definitions and macros for PAR_FECI2C */ +#define GPIO_PAR_FECI2C_SDA(x) (((x)&0x0003)) +#define GPIO_PAR_FECI2C_SCL(x) (((x)&0x0003)<<2) +#define GPIO_PAR_FECI2C_MDIO0 (0x0010) +#define GPIO_PAR_FECI2C_MDC0 (0x0040) +#define GPIO_PAR_FECI2C_MDIO1(x) (((x)&0x0003)<<8) +#define GPIO_PAR_FECI2C_MDC1(x) (((x)&0x0003)<<10) +#define GPIO_PAR_FECI2C_MDC1_MASK (0xF3FF) +#define GPIO_PAR_FECI2C_MDC1_MDC1 (0x0C00) +#define GPIO_PAR_FECI2C_MDC1_ATA_DIOR (0x0800) +#define GPIO_PAR_FECI2C_MDC1_GPIO (0x0000) +#define GPIO_PAR_FECI2C_MDIO1_MASK (0xFCFF) +#define GPIO_PAR_FECI2C_MDIO1_MDIO1 (0x0300) +#define GPIO_PAR_FECI2C_MDIO1_ATA_DIOW (0x0200) +#define GPIO_PAR_FECI2C_MDIO1_GPIO (0x0000) +#define GPIO_PAR_FECI2C_MDC0_MDC0 (0x0040) +#define GPIO_PAR_FECI2C_MDC0_GPIO (0x0000) +#define GPIO_PAR_FECI2C_MDIO0_MDIO0 (0x0010) +#define GPIO_PAR_FECI2C_MDIO0_GPIO (0x0000) +#define GPIO_PAR_FECI2C_SCL_MASK (0xFFF3) +#define GPIO_PAR_FECI2C_SCL_SCL (0x000C) +#define GPIO_PAR_FECI2C_SCL_U2TXD (0x0004) +#define GPIO_PAR_FECI2C_SCL_GPIO (0x0000) +#define GPIO_PAR_FECI2C_SDA_MASK (0xFFFC) +#define GPIO_PAR_FECI2C_SDA_SDA (0x0003) +#define GPIO_PAR_FECI2C_SDA_U2RXD (0x0001) +#define GPIO_PAR_FECI2C_SDA_GPIO (0x0000) + +/* Bit definitions and macros for PAR_SSI */ +#define GPIO_PAR_SSI_MCLK (0x0001) +#define GPIO_PAR_SSI_STXD(x) (((x)&0x0003)<<2) +#define GPIO_PAR_SSI_SRXD(x) (((x)&0x0003)<<4) +#define GPIO_PAR_SSI_FS(x) (((x)&0x0003)<<6) +#define GPIO_PAR_SSI_BCLK(x) (((x)&0x0003)<<8) +#define GPIO_PAR_SSI_BCLK_MASK (0xFCFF) +#define GPIO_PAR_SSI_BCLK_BCLK (0x0300) +#define GPIO_PAR_SSI_BCLK_U1CTS (0x0200) +#define GPIO_PAR_SSI_BCLK_GPIO (0x0000) +#define GPIO_PAR_SSI_FS_MASK (0xFF3F) +#define GPIO_PAR_SSI_FS_FS (0x00C0) +#define GPIO_PAR_SSI_FS_U1RTS (0x0080) +#define GPIO_PAR_SSI_FS_GPIO (0x0000) +#define GPIO_PAR_SSI_SRXD_MASK (0xFFCF) +#define GPIO_PAR_SSI_SRXD_SRXD (0x0030) +#define GPIO_PAR_SSI_SRXD_U1RXD (0x0020) +#define GPIO_PAR_SSI_SRXD_GPIO (0x0000) +#define GPIO_PAR_SSI_STXD_MASK (0xFFF3) +#define GPIO_PAR_SSI_STXD_STXD (0x000C) +#define GPIO_PAR_SSI_STXD_U1TXD (0x0008) +#define GPIO_PAR_SSI_STXD_GPIO (0x0000) +#define GPIO_PAR_SSI_MCLK_MCLK (0x0001) +#define GPIO_PAR_SSI_MCLK_GPIO (0x0000) + +/* Bit definitions and macros for PAR_ATA */ +#define GPIO_PAR_ATA_IORDY (0x0001) +#define GPIO_PAR_ATA_DMARQ (0x0002) +#define GPIO_PAR_ATA_RESET (0x0004) +#define GPIO_PAR_ATA_DA0 (0x0020) +#define GPIO_PAR_ATA_DA1 (0x0040) +#define GPIO_PAR_ATA_DA2 (0x0080) +#define GPIO_PAR_ATA_CS0 (0x0100) +#define GPIO_PAR_ATA_CS1 (0x0200) +#define GPIO_PAR_ATA_BUFEN (0x0400) +#define GPIO_PAR_ATA_BUFEN_BUFEN (0x0400) +#define GPIO_PAR_ATA_BUFEN_GPIO (0x0000) +#define GPIO_PAR_ATA_CS1_CS1 (0x0200) +#define GPIO_PAR_ATA_CS1_GPIO (0x0000) +#define GPIO_PAR_ATA_CS0_CS0 (0x0100) +#define GPIO_PAR_ATA_CS0_GPIO (0x0000) +#define GPIO_PAR_ATA_DA2_DA2 (0x0080) +#define GPIO_PAR_ATA_DA2_GPIO (0x0000) +#define GPIO_PAR_ATA_DA1_DA1 (0x0040) +#define GPIO_PAR_ATA_DA1_GPIO (0x0000) +#define GPIO_PAR_ATA_DA0_DA0 (0x0020) +#define GPIO_PAR_ATA_DA0_GPIO (0x0000) +#define GPIO_PAR_ATA_RESET_RESET (0x0004) +#define GPIO_PAR_ATA_RESET_GPIO (0x0000) +#define GPIO_PAR_ATA_DMARQ_DMARQ (0x0002) +#define GPIO_PAR_ATA_DMARQ_GPIO (0x0000) +#define GPIO_PAR_ATA_IORDY_IORDY (0x0001) +#define GPIO_PAR_ATA_IORDY_GPIO (0x0000) + +/* Bit definitions and macros for PAR_IRQ */ +#define GPIO_PAR_IRQ_IRQ1 (0x02) +#define GPIO_PAR_IRQ_IRQ4 (0x10) +#define GPIO_PAR_IRQ_IRQ4_IRQ4 (0x10) +#define GPIO_PAR_IRQ_IRQ4_GPIO (0x00) +#define GPIO_PAR_IRQ_IRQ1_IRQ1 (0x02) +#define GPIO_PAR_IRQ_IRQ1_GPIO (0x00) + +/* Bit definitions and macros for PAR_PCI */ +#define GPIO_PAR_PCI_REQ0 (0x0001) +#define GPIO_PAR_PCI_REQ1 (0x0004) +#define GPIO_PAR_PCI_REQ2 (0x0010) +#define GPIO_PAR_PCI_REQ3(x) (((x)&0x0003)<<6) +#define GPIO_PAR_PCI_GNT0 (0x0100) +#define GPIO_PAR_PCI_GNT1 (0x0400) +#define GPIO_PAR_PCI_GNT2 (0x1000) +#define GPIO_PAR_PCI_GNT3(x) (((x)&0x0003)<<14) +#define GPIO_PAR_PCI_GNT3_MASK (0x3FFF) +#define GPIO_PAR_PCI_GNT3_GNT3 (0xC000) +#define GPIO_PAR_PCI_GNT3_ATA_DMACK (0x8000) +#define GPIO_PAR_PCI_GNT3_GPIO (0x0000) +#define GPIO_PAR_PCI_GNT2_GNT2 (0x1000) +#define GPIO_PAR_PCI_GNT2_GPIO (0x0000) +#define GPIO_PAR_PCI_GNT1_GNT1 (0x0400) +#define GPIO_PAR_PCI_GNT1_GPIO (0x0000) +#define GPIO_PAR_PCI_GNT0_GNT0 (0x0100) +#define GPIO_PAR_PCI_GNT0_GPIO (0x0000) +#define GPIO_PAR_PCI_REQ3_MASK (0xFF3F) +#define GPIO_PAR_PCI_REQ3_REQ3 (0x00C0) +#define GPIO_PAR_PCI_REQ3_ATA_INTRQ (0x0080) +#define GPIO_PAR_PCI_REQ3_GPIO (0x0000) +#define GPIO_PAR_PCI_REQ2_REQ2 (0x0010) +#define GPIO_PAR_PCI_REQ2_GPIO (0x0000) +#define GPIO_PAR_PCI_REQ1_REQ1 (0x0040) +#define GPIO_PAR_PCI_REQ1_GPIO (0x0000) +#define GPIO_PAR_PCI_REQ0_REQ0 (0x0001) +#define GPIO_PAR_PCI_REQ0_GPIO (0x0000) + +/* Bit definitions and macros for MSCR_SDRAM */ +#define GPIO_MSCR_SDRAM_SDCTL(x) (((x)&0x03)) +#define GPIO_MSCR_SDRAM_SDCLK(x) (((x)&0x03)<<2) +#define GPIO_MSCR_SDRAM_SDDQS(x) (((x)&0x03)<<4) +#define GPIO_MSCR_SDRAM_SDDATA(x) (((x)&0x03)<<6) +#define GPIO_MSCR_SDRAM_SDDATA_MASK (0x3F) +#define GPIO_MSCR_SDRAM_SDDATA_DDR1 (0xC0) +#define GPIO_MSCR_SDRAM_SDDATA_DDR2 (0x80) +#define GPIO_MSCR_SDRAM_SDDATA_FS_LPDDR (0x40) +#define GPIO_MSCR_SDRAM_SDDATA_HS_LPDDR (0x00) +#define GPIO_MSCR_SDRAM_SDDQS_MASK (0xCF) +#define GPIO_MSCR_SDRAM_SDDQS_DDR1 (0x30) +#define GPIO_MSCR_SDRAM_SDDQS_DDR2 (0x20) +#define GPIO_MSCR_SDRAM_SDDQS_FS_LPDDR (0x10) +#define GPIO_MSCR_SDRAM_SDDQS_HS_LPDDR (0x00) +#define GPIO_MSCR_SDRAM_SDCLK_MASK (0xF3) +#define GPIO_MSCR_SDRAM_SDCLK_DDR1 (0x0C) +#define GPIO_MSCR_SDRAM_SDCLK_DDR2 (0x08) +#define GPIO_MSCR_SDRAM_SDCLK_FS_LPDDR (0x04) +#define GPIO_MSCR_SDRAM_SDCLK_HS_LPDDR (0x00) +#define GPIO_MSCR_SDRAM_SDCTL_MASK (0xFC) +#define GPIO_MSCR_SDRAM_SDCTL_DDR1 (0x03) +#define GPIO_MSCR_SDRAM_SDCTL_DDR2 (0x02) +#define GPIO_MSCR_SDRAM_SDCTL_FS_LPDDR (0x01) +#define GPIO_MSCR_SDRAM_SDCTL_HS_LPDDR (0x00) + +/* Bit definitions and macros for MSCR_PCI */ +#define GPIO_MSCR_PCI_PCI (0x01) +#define GPIO_MSCR_PCI_PCI_HI_66MHZ (0x01) +#define GPIO_MSCR_PCI_PCI_LO_33MHZ (0x00) + +/* Bit definitions and macros for DSCR_I2C */ +#define GPIO_DSCR_I2C_I2C(x) (((x)&0x03)) +#define GPIO_DSCR_I2C_I2C_LOAD_50PF (0x03) +#define GPIO_DSCR_I2C_I2C_LOAD_30PF (0x02) +#define GPIO_DSCR_I2C_I2C_LOAD_20PF (0x01) +#define GPIO_DSCR_I2C_I2C_LOAD_10PF (0x00) + +/* Bit definitions and macros for DSCR_FLEXBUS */ +#define GPIO_DSCR_FLEXBUS_FBADL(x) (((x)&0x03)) +#define GPIO_DSCR_FLEXBUS_FBADH(x) (((x)&0x03)<<2) +#define GPIO_DSCR_FLEXBUS_FBCTL(x) (((x)&0x03)<<4) +#define GPIO_DSCR_FLEXBUS_FBCLK(x) (((x)&0x03)<<6) +#define GPIO_DSCR_FLEXBUS_FBCLK_LOAD_50PF (0xC0) +#define GPIO_DSCR_FLEXBUS_FBCLK_LOAD_30PF (0x80) +#define GPIO_DSCR_FLEXBUS_FBCLK_LOAD_20PF (0x40) +#define GPIO_DSCR_FLEXBUS_FBCLK_LOAD_10PF (0x00) +#define GPIO_DSCR_FLEXBUS_FBCTL_LOAD_50PF (0x30) +#define GPIO_DSCR_FLEXBUS_FBCTL_LOAD_30PF (0x20) +#define GPIO_DSCR_FLEXBUS_FBCTL_LOAD_20PF (0x10) +#define GPIO_DSCR_FLEXBUS_FBCTL_LOAD_10PF (0x00) +#define GPIO_DSCR_FLEXBUS_FBADH_LOAD_50PF (0x0C) +#define GPIO_DSCR_FLEXBUS_FBADH_LOAD_30PF (0x08) +#define GPIO_DSCR_FLEXBUS_FBADH_LOAD_20PF (0x04) +#define GPIO_DSCR_FLEXBUS_FBADH_LOAD_10PF (0x00) +#define GPIO_DSCR_FLEXBUS_FBADL_LOAD_50PF (0x03) +#define GPIO_DSCR_FLEXBUS_FBADL_LOAD_30PF (0x02) +#define GPIO_DSCR_FLEXBUS_FBADL_LOAD_20PF (0x01) +#define GPIO_DSCR_FLEXBUS_FBADL_LOAD_10PF (0x00) + +/* Bit definitions and macros for DSCR_FEC */ +#define GPIO_DSCR_FEC_FEC0(x) (((x)&0x03)) +#define GPIO_DSCR_FEC_FEC1(x) (((x)&0x03)<<2) +#define GPIO_DSCR_FEC_FEC1_LOAD_50PF (0x0C) +#define GPIO_DSCR_FEC_FEC1_LOAD_30PF (0x08) +#define GPIO_DSCR_FEC_FEC1_LOAD_20PF (0x04) +#define GPIO_DSCR_FEC_FEC1_LOAD_10PF (0x00) +#define GPIO_DSCR_FEC_FEC0_LOAD_50PF (0x03) +#define GPIO_DSCR_FEC_FEC0_LOAD_30PF (0x02) +#define GPIO_DSCR_FEC_FEC0_LOAD_20PF (0x01) +#define GPIO_DSCR_FEC_FEC0_LOAD_10PF (0x00) + +/* Bit definitions and macros for DSCR_UART */ +#define GPIO_DSCR_UART_UART0(x) (((x)&0x03)) +#define GPIO_DSCR_UART_UART1(x) (((x)&0x03)<<2) +#define GPIO_DSCR_UART_UART1_LOAD_50PF (0x0C) +#define GPIO_DSCR_UART_UART1_LOAD_30PF (0x08) +#define GPIO_DSCR_UART_UART1_LOAD_20PF (0x04) +#define GPIO_DSCR_UART_UART1_LOAD_10PF (0x00) +#define GPIO_DSCR_UART_UART0_LOAD_50PF (0x03) +#define GPIO_DSCR_UART_UART0_LOAD_30PF (0x02) +#define GPIO_DSCR_UART_UART0_LOAD_20PF (0x01) +#define GPIO_DSCR_UART_UART0_LOAD_10PF (0x00) + +/* Bit definitions and macros for DSCR_DSPI */ +#define GPIO_DSCR_DSPI_DSPI(x) (((x)&0x03)) +#define GPIO_DSCR_DSPI_DSPI_LOAD_50PF (0x03) +#define GPIO_DSCR_DSPI_DSPI_LOAD_30PF (0x02) +#define GPIO_DSCR_DSPI_DSPI_LOAD_20PF (0x01) +#define GPIO_DSCR_DSPI_DSPI_LOAD_10PF (0x00) + +/* Bit definitions and macros for DSCR_TIMER */ +#define GPIO_DSCR_TIMER_TIMER(x) (((x)&0x03)) +#define GPIO_DSCR_TIMER_TIMER_LOAD_50PF (0x03) +#define GPIO_DSCR_TIMER_TIMER_LOAD_30PF (0x02) +#define GPIO_DSCR_TIMER_TIMER_LOAD_20PF (0x01) +#define GPIO_DSCR_TIMER_TIMER_LOAD_10PF (0x00) + +/* Bit definitions and macros for DSCR_SSI */ +#define GPIO_DSCR_SSI_SSI(x) (((x)&0x03)) +#define GPIO_DSCR_SSI_SSI_LOAD_50PF (0x03) +#define GPIO_DSCR_SSI_SSI_LOAD_30PF (0x02) +#define GPIO_DSCR_SSI_SSI_LOAD_20PF (0x01) +#define GPIO_DSCR_SSI_SSI_LOAD_10PF (0x00) + +/* Bit definitions and macros for DSCR_DMA */ +#define GPIO_DSCR_DMA_DMA(x) (((x)&0x03)) +#define GPIO_DSCR_DMA_DMA_LOAD_50PF (0x03) +#define GPIO_DSCR_DMA_DMA_LOAD_30PF (0x02) +#define GPIO_DSCR_DMA_DMA_LOAD_20PF (0x01) +#define GPIO_DSCR_DMA_DMA_LOAD_10PF (0x00) + +/* Bit definitions and macros for DSCR_DEBUG */ +#define GPIO_DSCR_DEBUG_DEBUG(x) (((x)&0x03)) +#define GPIO_DSCR_DEBUG_DEBUG_LOAD_50PF (0x03) +#define GPIO_DSCR_DEBUG_DEBUG_LOAD_30PF (0x02) +#define GPIO_DSCR_DEBUG_DEBUG_LOAD_20PF (0x01) +#define GPIO_DSCR_DEBUG_DEBUG_LOAD_10PF (0x00) + +/* Bit definitions and macros for DSCR_RESET */ +#define GPIO_DSCR_RESET_RESET(x) (((x)&0x03)) +#define GPIO_DSCR_RESET_RESET_LOAD_50PF (0x03) +#define GPIO_DSCR_RESET_RESET_LOAD_30PF (0x02) +#define GPIO_DSCR_RESET_RESET_LOAD_20PF (0x01) +#define GPIO_DSCR_RESET_RESET_LOAD_10PF (0x00) + +/* Bit definitions and macros for DSCR_IRQ */ +#define GPIO_DSCR_IRQ_IRQ(x) (((x)&0x03)) +#define GPIO_DSCR_IRQ_IRQ_LOAD_50PF (0x03) +#define GPIO_DSCR_IRQ_IRQ_LOAD_30PF (0x02) +#define GPIO_DSCR_IRQ_IRQ_LOAD_20PF (0x01) +#define GPIO_DSCR_IRQ_IRQ_LOAD_10PF (0x00) + +/* Bit definitions and macros for DSCR_USB */ +#define GPIO_DSCR_USB_USB(x) (((x)&0x03)) +#define GPIO_DSCR_USB_USB_LOAD_50PF (0x03) +#define GPIO_DSCR_USB_USB_LOAD_30PF (0x02) +#define GPIO_DSCR_USB_USB_LOAD_20PF (0x01) +#define GPIO_DSCR_USB_USB_LOAD_10PF (0x00) + +/* Bit definitions and macros for DSCR_ATA */ +#define GPIO_DSCR_ATA_ATA(x) (((x)&0x03)) +#define GPIO_DSCR_ATA_ATA_LOAD_50PF (0x03) +#define GPIO_DSCR_ATA_ATA_LOAD_30PF (0x02) +#define GPIO_DSCR_ATA_ATA_LOAD_20PF (0x01) +#define GPIO_DSCR_ATA_ATA_LOAD_10PF (0x00) + +/********************************************************************* +* Random Number Generator (RNG) +*********************************************************************/ + +/* Bit definitions and macros for RNGCR */ +#define RNG_RNGCR_GO (0x00000001) +#define RNG_RNGCR_HA (0x00000002) +#define RNG_RNGCR_IM (0x00000004) +#define RNG_RNGCR_CI (0x00000008) + +/* Bit definitions and macros for RNGSR */ +#define RNG_RNGSR_SV (0x00000001) +#define RNG_RNGSR_LRS (0x00000002) +#define RNG_RNGSR_FUF (0x00000004) +#define RNG_RNGSR_EI (0x00000008) +#define RNG_RNGSR_OFL(x) (((x)&0x000000FF)<<8) +#define RNG_RNGSR_OFS(x) (((x)&0x000000FF)<<16) + +/********************************************************************* +* SDRAM Controller (SDRAMC) +*********************************************************************/ + +/* Bit definitions and macros for SDMR */ +#define SDRAMC_SDMR_DDR2_AD(x) (((x)&0x00003FFF)) /* Address for DDR2 */ +#define SDRAMC_SDMR_CMD (0x00010000) /* Command */ +#define SDRAMC_SDMR_AD(x) (((x)&0x00000FFF)<<18) /* Address */ +#define SDRAMC_SDMR_BK(x) (((x)&0x00000003)<<30) /* Bank Address */ +#define SDRAMC_SDMR_BK_LMR (0x00000000) +#define SDRAMC_SDMR_BK_LEMR (0x40000000) + +/* Bit definitions and macros for SDCR */ +#define SDRAMC_SDCR_DPD (0x00000001) /* Deep Power-Down Mode */ +#define SDRAMC_SDCR_IPALL (0x00000002) /* Initiate Precharge All */ +#define SDRAMC_SDCR_IREF (0x00000004) /* Initiate Refresh */ +#define SDRAMC_SDCR_DQS_OE(x) (((x)&0x00000003)<<10) /* DQS Output Enable */ +#define SDRAMC_SDCR_MEM_PS (0x00002000) /* Data Port Size */ +#define SDRAMC_SDCR_REF_CNT(x) (((x)&0x0000003F)<<16) /* Periodic Refresh Counter */ +#define SDRAMC_SDCR_OE_RULE (0x00400000) /* Drive Rule Selection */ +#define SDRAMC_SDCR_ADDR_MUX(x) (((x)&0x00000003)<<24) /* Internal Address Mux Select */ +#define SDRAMC_SDCR_DDR2_MODE (0x08000000) /* DDR2 Mode Select */ +#define SDRAMC_SDCR_REF_EN (0x10000000) /* Refresh Enable */ +#define SDRAMC_SDCR_DDR_MODE (0x20000000) /* DDR Mode Select */ +#define SDRAMC_SDCR_CKE (0x40000000) /* Clock Enable */ +#define SDRAMC_SDCR_MODE_EN (0x80000000) /* SDRAM Mode Register Programming Enable */ +#define SDRAMC_SDCR_DQS_OE_BOTH (0x00000C000) + +/* Bit definitions and macros for SDCFG1 */ +#define SDRAMC_SDCFG1_WT_LAT(x) (((x)&0x00000007)<<4) /* Write Latency */ +#define SDRAMC_SDCFG1_REF2ACT(x) (((x)&0x0000000F)<<8) /* Refresh to active delay */ +#define SDRAMC_SDCFG1_PRE2ACT(x) (((x)&0x00000007)<<12) /* Precharge to active delay */ +#define SDRAMC_SDCFG1_ACT2RW(x) (((x)&0x00000007)<<16) /* Active to read/write delay */ +#define SDRAMC_SDCFG1_RD_LAT(x) (((x)&0x0000000F)<<20) /* Read CAS Latency */ +#define SDRAMC_SDCFG1_SWT2RWP(x) (((x)&0x00000007)<<24) /* Single write to read/write/precharge delay */ +#define SDRAMC_SDCFG1_SRD2RWP(x) (((x)&0x0000000F)<<28) /* Single read to read/write/precharge delay */ + +/* Bit definitions and macros for SDCFG2 */ +#define SDRAMC_SDCFG2_BL(x) (((x)&0x0000000F)<<16) /* Burst Length */ +#define SDRAMC_SDCFG2_BRD2W(x) (((x)&0x0000000F)<<20) /* Burst read to write delay */ +#define SDRAMC_SDCFG2_BWT2RWP(x) (((x)&0x0000000F)<<24) /* Burst write to read/write/precharge delay */ +#define SDRAMC_SDCFG2_BRD2RP(x) (((x)&0x0000000F)<<28) /* Burst read to read/precharge delay */ + +/* Bit definitions and macros for SDCS group */ +#define SDRAMC_SDCS_CSSZ(x) (((x)&0x0000001F)) /* Chip-Select Size */ +#define SDRAMC_SDCS_CSBA(x) (((x)&0x00000FFF)<<20) /* Chip-Select Base Address */ +#define SDRAMC_SDCS_BA(x) ((x)&0xFFF00000) +#define SDRAMC_SDCS_CSSZ_DISABLE (0x00000000) +#define SDRAMC_SDCS_CSSZ_1MBYTE (0x00000013) +#define SDRAMC_SDCS_CSSZ_2MBYTE (0x00000014) +#define SDRAMC_SDCS_CSSZ_4MBYTE (0x00000015) +#define SDRAMC_SDCS_CSSZ_8MBYTE (0x00000016) +#define SDRAMC_SDCS_CSSZ_16MBYTE (0x00000017) +#define SDRAMC_SDCS_CSSZ_32MBYTE (0x00000018) +#define SDRAMC_SDCS_CSSZ_64MBYTE (0x00000019) +#define SDRAMC_SDCS_CSSZ_128MBYTE (0x0000001A) +#define SDRAMC_SDCS_CSSZ_256MBYTE (0x0000001B) +#define SDRAMC_SDCS_CSSZ_512MBYTE (0x0000001C) +#define SDRAMC_SDCS_CSSZ_1GBYTE (0x0000001D) +#define SDRAMC_SDCS_CSSZ_2GBYTE (0x0000001E) +#define SDRAMC_SDCS_CSSZ_4GBYTE (0x0000001F) + +/********************************************************************* +* Synchronous Serial Interface (SSI) +*********************************************************************/ + +/* Bit definitions and macros for CR */ +#define SSI_CR_SSI_EN (0x00000001) +#define SSI_CR_TE (0x00000002) +#define SSI_CR_RE (0x00000004) +#define SSI_CR_NET (0x00000008) +#define SSI_CR_SYN (0x00000010) +#define SSI_CR_I2S(x) (((x)&0x00000003)<<5) +#define SSI_CR_MCE (0x00000080) +#define SSI_CR_TCH (0x00000100) +#define SSI_CR_CIS (0x00000200) +#define SSI_CR_I2S_NORMAL (0x00000000) +#define SSI_CR_I2S_MASTER (0x00000020) +#define SSI_CR_I2S_SLAVE (0x00000040) + +/* Bit definitions and macros for ISR */ +#define SSI_ISR_TFE0 (0x00000001) +#define SSI_ISR_TFE1 (0x00000002) +#define SSI_ISR_RFF0 (0x00000004) +#define SSI_ISR_RFF1 (0x00000008) +#define SSI_ISR_RLS (0x00000010) +#define SSI_ISR_TLS (0x00000020) +#define SSI_ISR_RFS (0x00000040) +#define SSI_ISR_TFS (0x00000080) +#define SSI_ISR_TUE0 (0x00000100) +#define SSI_ISR_TUE1 (0x00000200) +#define SSI_ISR_ROE0 (0x00000400) +#define SSI_ISR_ROE1 (0x00000800) +#define SSI_ISR_TDE0 (0x00001000) +#define SSI_ISR_TDE1 (0x00002000) +#define SSI_ISR_RDR0 (0x00004000) +#define SSI_ISR_RDR1 (0x00008000) +#define SSI_ISR_RXT (0x00010000) +#define SSI_ISR_CMDDU (0x00020000) +#define SSI_ISR_CMDAU (0x00040000) + +/* Bit definitions and macros for IER */ +#define SSI_IER_TFE0 (0x00000001) +#define SSI_IER_TFE1 (0x00000002) +#define SSI_IER_RFF0 (0x00000004) +#define SSI_IER_RFF1 (0x00000008) +#define SSI_IER_RLS (0x00000010) +#define SSI_IER_TLS (0x00000020) +#define SSI_IER_RFS (0x00000040) +#define SSI_IER_TFS (0x00000080) +#define SSI_IER_TUE0 (0x00000100) +#define SSI_IER_TUE1 (0x00000200) +#define SSI_IER_ROE0 (0x00000400) +#define SSI_IER_ROE1 (0x00000800) +#define SSI_IER_TDE0 (0x00001000) +#define SSI_IER_TDE1 (0x00002000) +#define SSI_IER_RDR0 (0x00004000) +#define SSI_IER_RDR1 (0x00008000) +#define SSI_IER_RXT (0x00010000) +#define SSI_IER_CMDU (0x00020000) +#define SSI_IER_CMDAU (0x00040000) +#define SSI_IER_TIE (0x00080000) +#define SSI_IER_TDMAE (0x00100000) +#define SSI_IER_RIE (0x00200000) +#define SSI_IER_RDMAE (0x00400000) + +/* Bit definitions and macros for TCR */ +#define SSI_TCR_TEFS (0x00000001) +#define SSI_TCR_TFSL (0x00000002) +#define SSI_TCR_TFSI (0x00000004) +#define SSI_TCR_TSCKP (0x00000008) +#define SSI_TCR_TSHFD (0x00000010) +#define SSI_TCR_TXDIR (0x00000020) +#define SSI_TCR_TFDIR (0x00000040) +#define SSI_TCR_TFEN0 (0x00000080) +#define SSI_TCR_TFEN1 (0x00000100) +#define SSI_TCR_TXBIT0 (0x00000200) + +/* Bit definitions and macros for RCR */ +#define SSI_RCR_REFS (0x00000001) +#define SSI_RCR_RFSL (0x00000002) +#define SSI_RCR_RFSI (0x00000004) +#define SSI_RCR_RSCKP (0x00000008) +#define SSI_RCR_RSHFD (0x00000010) +#define SSI_RCR_RFEN0 (0x00000080) +#define SSI_RCR_RFEN1 (0x00000100) +#define SSI_RCR_RXBIT0 (0x00000200) +#define SSI_RCR_RXEXT (0x00000400) + +/* Bit definitions and macros for CCR */ +#define SSI_CCR_PM(x) (((x)&0x000000FF)) +#define SSI_CCR_DC(x) (((x)&0x0000001F)<<8) +#define SSI_CCR_WL(x) (((x)&0x0000000F)<<13) +#define SSI_CCR_PSR (0x00020000) +#define SSI_CCR_DIV2 (0x00040000) + +/* Bit definitions and macros for FCSR */ +#define SSI_FCSR_TFWM0(x) (((x)&0x0000000F)) +#define SSI_FCSR_RFWM0(x) (((x)&0x0000000F)<<4) +#define SSI_FCSR_TFCNT0(x) (((x)&0x0000000F)<<8) +#define SSI_FCSR_RFCNT0(x) (((x)&0x0000000F)<<12) +#define SSI_FCSR_TFWM1(x) (((x)&0x0000000F)<<16) +#define SSI_FCSR_RFWM1(x) (((x)&0x0000000F)<<20) +#define SSI_FCSR_TFCNT1(x) (((x)&0x0000000F)<<24) +#define SSI_FCSR_RFCNT1(x) (((x)&0x0000000F)<<28) + +/* Bit definitions and macros for ACR */ +#define SSI_ACR_AC97EN (0x00000001) +#define SSI_ACR_FV (0x00000002) +#define SSI_ACR_TIF (0x00000004) +#define SSI_ACR_RD (0x00000008) +#define SSI_ACR_WR (0x00000010) +#define SSI_ACR_FRDIV(x) (((x)&0x0000003F)<<5) + +/* Bit definitions and macros for ACADD */ +#define SSI_ACADD_SSI_ACADD(x) (((x)&0x0007FFFF)) + +/* Bit definitions and macros for ACDAT */ +#define SSI_ACDAT_SSI_ACDAT(x) (((x)&0x0007FFFF)) + +/* Bit definitions and macros for ATAG */ +#define SSI_ATAG_DDI_ATAG(x) (((x)&0x0000FFFF)) + +/********************************************************************* +* Phase Locked Loop (PLL) +*********************************************************************/ + +/* Bit definitions and macros for PCR */ +#define PLL_PCR_OUTDIV1(x) (((x)&0x0000000F)) /* Output divider for CPU clock frequency */ +#define PLL_PCR_OUTDIV2(x) (((x)&0x0000000F)<<4) /* Output divider for internal bus clock frequency */ +#define PLL_PCR_OUTDIV3(x) (((x)&0x0000000F)<<8) /* Output divider for Flexbus clock frequency */ +#define PLL_PCR_OUTDIV4(x) (((x)&0x0000000F)<<12) /* Output divider for PCI clock frequency */ +#define PLL_PCR_OUTDIV5(x) (((x)&0x0000000F)<<16) /* Output divider for USB clock frequency */ +#define PLL_PCR_PFDR(x) (((x)&0x000000FF)<<24) /* Feedback divider for VCO frequency */ +#define PLL_PCR_PFDR_MASK (0x000F0000) +#define PLL_PCR_OUTDIV5_MASK (0x000F0000) +#define PLL_PCR_OUTDIV4_MASK (0x0000F000) +#define PLL_PCR_OUTDIV3_MASK (0x00000F00) +#define PLL_PCR_OUTDIV2_MASK (0x000000F0) +#define PLL_PCR_OUTDIV1_MASK (0x0000000F) + +/* Bit definitions and macros for PSR */ +#define PLL_PSR_LOCKS (0x00000001) /* PLL lost lock - sticky */ +#define PLL_PSR_LOCK (0x00000002) /* PLL lock status */ +#define PLL_PSR_LOLIRQ (0x00000004) /* PLL loss-of-lock interrupt enable */ +#define PLL_PSR_LOLRE (0x00000008) /* PLL loss-of-lock reset enable */ + +/********************************************************************* +* PCI +*********************************************************************/ + +/* Bit definitions and macros for SCR */ +#define PCI_SCR_PE (0x80000000) /* Parity Error detected */ +#define PCI_SCR_SE (0x40000000) /* System error signalled */ +#define PCI_SCR_MA (0x20000000) /* Master aboart received */ +#define PCI_SCR_TR (0x10000000) /* Target abort received */ +#define PCI_SCR_TS (0x08000000) /* Target abort signalled */ +#define PCI_SCR_DT (0x06000000) /* PCI_DEVSEL timing */ +#define PCI_SCR_DP (0x01000000) /* Master data parity err */ +#define PCI_SCR_FC (0x00800000) /* Fast back-to-back */ +#define PCI_SCR_R (0x00400000) /* Reserved */ +#define PCI_SCR_66M (0x00200000) /* 66Mhz */ +#define PCI_SCR_C (0x00100000) /* Capabilities list */ +#define PCI_SCR_F (0x00000200) /* Fast back-to-back enable */ +#define PCI_SCR_S (0x00000100) /* SERR enable */ +#define PCI_SCR_ST (0x00000080) /* Addr and Data stepping */ +#define PCI_SCR_PER (0x00000040) /* Parity error response */ +#define PCI_SCR_V (0x00000020) /* VGA palette snoop enable */ +#define PCI_SCR_MW (0x00000010) /* Memory write and invalidate enable */ +#define PCI_SCR_SP (0x00000008) /* Special cycle monitor or ignore */ +#define PCI_SCR_B (0x00000004) /* Bus master enable */ +#define PCI_SCR_M (0x00000002) /* Memory access control */ +#define PCI_SCR_IO (0x00000001) /* I/O access control */ + +#define PCI_CR1_BIST(x) ((x & 0xFF) << 24) /* Built in self test */ +#define PCI_CR1_HDR(x) ((x & 0xFF) << 16) /* Header type */ +#define PCI_CR1_LTMR(x) ((x & 0xF8) << 8) /* Latency timer */ +#define PCI_CR1_CLS(x) (x & 0x0F) /* Cache line size */ + +#define PCI_BAR_BAR0(x) (x & 0xFFFC0000) +#define PCI_BAR_BAR1(x) (x & 0xFFF00000) +#define PCI_BAR_BAR2(x) (x & 0xFFC00000) +#define PCI_BAR_BAR3(x) (x & 0xFF000000) +#define PCI_BAR_BAR4(x) (x & 0xF8000000) +#define PCI_BAR_BAR5(x) (x & 0xE0000000) +#define PCI_BAR_PREF (0x00000004) /* Prefetchable access */ +#define PCI_BAR_RANGE (0x00000002) /* Fixed to 00 */ +#define PCI_BAR_IO_M (0x00000001) /* IO / memory space */ + +#define PCI_CR2_MAXLAT(x) ((x & 0xFF) << 24) /* Maximum latency */ +#define PCI_CR2_MINGNT(x) ((x & 0xFF) << 16) /* Minimum grant */ +#define PCI_CR2_INTPIN(x) ((x & 0xFF) << 8) /* Interrupt Pin */ +#define PCI_CR2_INTLIN(x) (x & 0xFF) /* Interrupt Line */ + +#define PCI_GSCR_DRD (0x80000000) /* Delayed read discarded */ +#define PCI_GSCR_PE (0x20000000) /* PCI_PERR detected */ +#define PCI_GSCR_SE (0x10000000) /* SERR detected */ +#define PCI_GSCR_ER (0x08000000) /* Error response detected */ +#define PCI_GSCR_DRDE (0x00008000) /* Delayed read discarded enable */ +#define PCI_GSCR_PEE (0x00002000) /* PERR detected interrupt enable */ +#define PCI_GSCR_SEE (0x00001000) /* SERR detected interrupt enable */ +#define PCI_GSCR_PR (0x00000001) /* PCI reset */ + +#define PCI_TCR1_LD (0x01000000) /* Latency rule disable */ +#define PCI_TCR1_PID (0x00020000) /* Prefetch invalidate and disable */ +#define PCI_TCR1_P (0x00010000) /* Prefetch reads */ +#define PCI_TCR1_WCD (0x00000100) /* Write combine disable */ + +#define PCI_TCR1_B5E (0x00002000) /* */ +#define PCI_TCR1_B4E (0x00001000) /* */ +#define PCI_TCR1_B3E (0x00000800) /* */ +#define PCI_TCR1_B2E (0x00000400) /* */ +#define PCI_TCR1_B1E (0x00000200) /* */ +#define PCI_TCR1_B0E (0x00000100) /* */ +#define PCI_TCR1_CR (0x00000001) /* */ + +#define PCI_TBATR_BAT(x) ((x & 0xFFF) << 20) +#define PCI_TBATR_EN (0x00000001) /* Enable */ + +#define PCI_IWCR_W0C_IO (0x08000000) /* Windows Maps to PCI I/O */ +#define PCI_IWCR_W0C_PRC_RDMUL (0x04000000) /* PCI Memory Read multiple */ +#define PCI_IWCR_W0C_PRC_RDLN (0x02000000) /* PCI Memory Read line */ +#define PCI_IWCR_W0C_PRC_RD (0x00000000) /* PCI Memory Read */ +#define PCI_IWCR_W0C_EN (0x01000000) /* Enable - Register initialize */ +#define PCI_IWCR_W1C_IO (0x00080000) /* Windows Maps to PCI I/O */ +#define PCI_IWCR_W1C_PRC_RDMUL (0x00040000) /* PCI Memory Read multiple */ +#define PCI_IWCR_W1C_PRC_RDLN (0x00020000) /* PCI Memory Read line */ +#define PCI_IWCR_W1C_PRC_RD (0x00000000) /* PCI Memory Read */ +#define PCI_IWCR_W1C_EN (0x00010000) /* Enable - Register initialize */ +#define PCI_IWCR_W2C_IO (0x00000800) /* Windows Maps to PCI I/O */ +#define PCI_IWCR_W2C_PRC_RDMUL (0x00000400) /* PCI Memory Read multiple */ +#define PCI_IWCR_W2C_PRC_RDLN (0x00000200) /* PCI Memory Read line */ +#define PCI_IWCR_W2C_PRC_RD (0x00000000) /* PCI Memory Read */ +#define PCI_IWCR_W2C_EN (0x00000100) /* Enable - Register initialize */ + +#define PCI_ICR_REE (0x04000000) /* Retry error enable */ +#define PCI_ICR_IAE (0x02000000) /* Initiator abort enable */ +#define PCI_ICR_TAE (0x01000000) /* Target abort enable */ + +#define PCI_IDR_DEVID ( + +/********************************************************************/ + +#endif /* __MCF5445X__ */ diff --git a/include/asm-m68k/rtc.h b/include/asm-m68k/rtc.h index f955bc5fe14..7651ca93258 100644 --- a/include/asm-m68k/rtc.h +++ b/include/asm-m68k/rtc.h @@ -35,9 +35,10 @@ typedef struct rtc_ctrl { u32 cr; /* 0x10 Control Register */ u32 isr; /* 0x14 Interrupt Status Register */ u32 ier; /* 0x18 Interrupt Enable Register */ - u32 stpwach; /* 0x1C Stopwatch Minutes Register */ + u32 stpwatch; /* 0x1C Stopwatch Minutes Register */ u32 days; /* 0x20 Days Counter Register */ u32 alrm_day; /* 0x24 Days Alarm Register */ + void *extended; } rtc_t; /* Bit definitions and macros for HOURMIN */ diff --git a/include/asm-m68k/u-boot.h b/include/asm-m68k/u-boot.h index 70dbda464c0..93a6959ff14 100644 --- a/include/asm-m68k/u-boot.h +++ b/include/asm-m68k/u-boot.h @@ -52,6 +52,14 @@ typedef struct bd_info { unsigned short bi_ethspeed; /* Ethernet speed in Mbps */ unsigned long bi_intfreq; /* Internal Freq, in MHz */ unsigned long bi_busfreq; /* Bus Freq, in MHz */ +#ifdef CONFIG_PCI + unsigned long bi_pcifreq; /* pci Freq in MHz */ +#endif +#ifdef CONFIG_EXTRA_CLOCK + unsigned long bi_inpfreq; /* input Freq in MHz */ + unsigned long bi_vcofreq; /* vco Freq in MHz */ + unsigned long bi_flbfreq; /* Flexbus Freq in MHz */ +#endif unsigned long bi_baudrate; /* Console Baudrate */ #ifdef CONFIG_HAS_ETH1 diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h new file mode 100644 index 00000000000..6f4859c2380 --- /dev/null +++ b/include/configs/M54455EVB.h @@ -0,0 +1,391 @@ +/* + * Configuation settings for the Freescale MCF54455 EVB board. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef _JAMICA54455_H +#define _JAMICA54455_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_MCF5445x /* define processor family */ +#define CONFIG_M54455 /* define processor type */ +#define CONFIG_M54455EVB /* M54455EVB board */ + +#undef DEBUG + +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } + +#undef CONFIG_WATCHDOG + +#define CONFIG_TIMESTAMP /* Print image info with timestamp */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* Command line configuration */ +#include + +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO + +#undef CONFIG_CMD_LOADB +#undef CONFIG_CMD_LOADS + +/* Network configuration */ +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_MULTI 1 +# define CONFIG_MII 1 +# define CONFIG_CF_DOMII +# define CFG_DISCOVER_PHY +# define CFG_RX_ETH_BUFFER 8 +# define CFG_FAULT_ECHO_LINK_DOWN + +# define CFG_FEC0_PINMUX 0 +# define CFG_FEC1_PINMUX 0 +# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +# define CFG_FEC1_MIIBASE CFG_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 +# define CONFIG_HAS_ETH1 + +# define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ +# define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)" +# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 +# define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61 +# define CONFIG_ETHPRIME "FEC0" +# define CONFIG_IPADDR 192.162.1.2 +# define CONFIG_NETMASK 255.255.255.0 +# define CONFIG_SERVERIP 192.162.1.1 +# define CONFIG_GATEWAYIP 192.162.1.1 +# define CONFIG_OVERWRITE_ETHADDR_ONCE + +/* If CFG_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CFG_DISCOVER_PHY +# define FECDUPLEX FULL +# define FECSPEED _100BASET +# else +# ifndef CFG_FAULT_ECHO_LINK_DOWN +# define CFG_FAULT_ECHO_LINK_DOWN +# endif +# endif /* CFG_DISCOVER_PHY */ +#endif + +#define CONFIG_HOSTNAME M54455EVB +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "inpclk=" MK_STR(CFG_INPUT_CLKSRC) "\0" \ + "loadaddr=40010000\0" \ + "u-boot=u-boot.bin\0" \ + "load=tftp ${loadaddr) ${u-boot}\0" \ + "upd=run load; run prog\0" \ + "prog=prot off 0 2ffff;" \ + "era 0 2ffff;" \ + "cp.b ${loadaddr} 0 ${filesize};" \ + "save\0" \ + "" + +/* ATA configuration */ +#define CONFIG_ISO_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_IDE_RESET 1 +#define CONFIG_IDE_PREINIT 1 +#define CONFIG_ATAPI +#undef CONFIG_LBA48 + +#define CFG_IDE_MAXBUS 1 +#define CFG_IDE_MAXDEVICE 2 + +#define CFG_ATA_BASE_ADDR 0x90000000 +#define CFG_ATA_IDE0_OFFSET 0 + +#define CFG_ATA_DATA_OFFSET 0xA0 /* Offset for data I/O */ +#define CFG_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */ +#define CFG_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */ +#define CFG_ATA_STRIDE 4 /* Interval between registers */ +#define _IO_BASE 0 + +/* Realtime clock */ +#define CONFIG_MCFRTC +#undef RTC_DEBUG +#define CFG_RTC_OSCILLATOR (32 * CFG_HZ) + +/* Timer */ +#define CONFIG_MCFTMR +#undef CONFIG_MCFPIT + +/* I2c */ +#define CONFIG_FSL_I2C +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 80000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_OFFSET 0x58000 +#define CFG_IMMR CFG_MBAR + +/* PCI */ +#define CONFIG_PCI 1 + +#define CFG_PCI_MEM_BUS 0xA0000000 +#define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BUS +#define CFG_PCI_MEM_SIZE 0x10000000 + +#define CFG_PCI_IO_BUS 0xB1000000 +#define CFG_PCI_IO_PHYS CFG_PCI_IO_BUS +#define CFG_PCI_IO_SIZE 0x01000000 + +#define CFG_PCI_CFG_BUS 0xB0000000 +#define CFG_PCI_CFG_PHYS CFG_PCI_CFG_BUS +#define CFG_PCI_CFG_SIZE 0x01000000 + +/* FPGA - Spartan 2 */ +/* experiment +#define CONFIG_FPGA CFG_SPARTAN3 +#define CONFIG_FPGA_COUNT 1 +#define CFG_FPGA_PROG_FEEDBACK +#define CFG_FPGA_CHECK_CTRLC +*/ + +/* Input, PCI, Flexbus, and VCO */ +#define CONFIG_EXTRA_CLOCK + +#define CONFIG_PRAM 512 /* 512 KB */ + +#define CFG_PROMPT "-> " +#define CFG_LONGHELP /* undef to save memory */ + +#if defined(CONFIG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x10000) + +#define CFG_HZ 1000 + +#define CFG_MBAR 0xFC000000 + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR 0x80000000 +#define CFG_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */ +#define CFG_INIT_RAM_CTRL 0x221 +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET ((CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) - 16) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x40000000 +#define CFG_SDRAM_BASE1 0x48000000 +#define CFG_SDRAM_SIZE 256 /* SDRAM size in MB */ +#define CFG_SDRAM_CFG1 0x65311610 +#define CFG_SDRAM_CFG2 0x59670000 +#define CFG_SDRAM_CTRL 0xEA0B2000 +#define CFG_SDRAM_EMOD 0x40010000 +#define CFG_SDRAM_MODE 0x00010033 + +#define CFG_MEMTEST_START CFG_SDRAM_BASE + 0x400 +#define CFG_MEMTEST_END ((CFG_SDRAM_SIZE - 3) << 20) + +#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) +#define CFG_BOOTPARAMS_LEN 64*1024 +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization ?? + */ +/* Initial Memory map for Linux */ +#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) + +/* Configuration for environment + * Environment is embedded in u-boot in the second sector of the flash + */ +#define CFG_ENV_OFFSET 0x4000 +#define CFG_ENV_SECT_SIZE 0x2000 +#define CFG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_OVERWRITE 1 +#undef CFG_ENV_IS_EMBEDDED + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#ifdef CFG_ATMEL_BOOT +# define CFG_FLASH_BASE 0 +# define CFG_FLASH0_BASE CFG_CS0_BASE +# define CFG_FLASH1_BASE CFG_CS1_BASE +#else +# define CFG_FLASH_BASE CFG_FLASH0_BASE +# define CFG_FLASH0_BASE CFG_CS1_BASE +# define CFG_FLASH1_BASE CFG_CS0_BASE +#endif + +/* M54455EVB has one non CFI flash, defined CFG_FLASH_CFI will cause the system +/* M54455EVB has one non CFI flash, defined CFG_FLASH_CFI will cause the system + keep reset. */ +#undef CFG_FLASH_CFI +#ifdef CFG_FLASH_CFI + +# define CFG_FLASH_CFI_DRIVER 1 +# define CFG_FLASH_SIZE 0x1000000 /* Max size that the board might have */ +# define CFG_FLASH_CFI_WIDTH FLASH_CFI_8BIT +# define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +# define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ +# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ +# define CFG_FLASH_CHECKSUM +# define CFG_FLASH_BANKS_LIST { CFG_CS0_BASE, CFG_CS1_BASE } + +#else + +# define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ + +# define CFG_ATMEL_REGION 4 +# define CFG_ATMEL_TOTALSECT 11 +# define CFG_ATMEL_SECT {1, 2, 1, 7} +# define CFG_ATMEL_SECTSZ {0x4000, 0x2000, 0x8000, 0x10000} +# define CFG_INTEL_SECT 137 + +/* max number of sectors on one chip */ +# define CFG_MAX_FLASH_SECT (CFG_ATMEL_TOTALSECT + CFG_INTEL_SECT) +# define CFG_FLASH_ERASE_TOUT 2000 /* Atmel needs longer timeout */ +# define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ +# define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ +# define CFG_FLASH_UNLOCK_TOUT 100 /* Timeout for Flash Clear Lock Bits (in ms) */ +# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ +# define CFG_FLASH_CHECKSUM + +#endif + +/* + * This is setting for JFFS2 support in u-boot. + * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. + */ +#ifdef CFG_ATMEL_BOOT +# define CONFIG_JFFS2_DEV "nor0" +# define CONFIG_JFFS2_PART_SIZE 0x01000000 +# define CONFIG_JFFS2_PART_OFFSET CFG_FLASH1_BASE +#else +# define CONFIG_JFFS2_DEV "nor0" +# define CONFIG_JFFS2_PART_SIZE (0x01000000 - 0x500000) +# define CONFIG_JFFS2_PART_OFFSET (CFG_FLASH0_BASE + 0x500000) +#endif + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 + +/*----------------------------------------------------------------------- + * Memory bank definitions + */ +/* + * CS0 - NOR Flash 1, 2, 4, or 8MB + * CS1 - CompactFlash and registers + * CS2 - CPLD + * CS3 - FPGA + * CS4 - Available + * CS5 - Available + */ + +#ifdef CFG_ATMEL_BOOT + /* Atmel Flash */ +#define CFG_CS0_BASE 0 +#define CFG_CS0_MASK 0x00070001 +#define CFG_CS0_CTRL 0x00001140 +/* Intel Flash */ +#define CFG_CS1_BASE 0x04000000 +#define CFG_CS1_MASK 0x01FF0001 +#define CFG_CS1_CTRL 0x003F3D60 + +#define CFG_ATMEL_BASE CFG_CS0_BASE +#else +/* Intel Flash */ +#define CFG_CS0_BASE 0 +#define CFG_CS0_MASK 0x01FF0001 +#define CFG_CS0_CTRL 0x003F3D60 + /* Atmel Flash */ +#define CFG_CS1_BASE 0x04000000 +#define CFG_CS1_MASK 0x00070001 +#define CFG_CS1_CTRL 0x00001140 + +#define CFG_ATMEL_BASE CFG_CS1_BASE +#endif + +/* CPLD */ +#define CFG_CS2_BASE 0x08000000 +#define CFG_CS2_MASK 0x00070001 +#define CFG_CS2_CTRL 0x003f1140 + +/* FPGA */ +#define CFG_CS3_BASE 0x09000000 +#define CFG_CS3_MASK 0x00070001 +#define CFG_CS3_CTRL 0x00000020 + +#endif /* _JAMICA54455_H */ diff --git a/lib_m68k/board.c b/lib_m68k/board.c index 778ec788a81..43f97c404da 100644 --- a/lib_m68k/board.c +++ b/lib_m68k/board.c @@ -30,9 +30,7 @@ #include #include -#ifdef CONFIG_M5272 -#include -#endif +#include #if defined(CONFIG_CMD_IDE) #include @@ -139,19 +137,19 @@ void *sbrk (ptrdiff_t increment) char *strmhz(char *buf, long hz) { - long l, n; - long m; + long l, n; + long m; - n = hz / 1000000L; + n = hz / 1000000L; - l = sprintf (buf, "%ld", n); + l = sprintf (buf, "%ld", n); - m = (hz % 1000000L) / 1000L; + m = (hz % 1000000L) / 1000L; - if (m != 0) - sprintf (buf+l, ".%03ld", m); + if (m != 0) + sprintf (buf+l, ".%03ld", m); - return (buf); + return (buf); } /* @@ -169,7 +167,7 @@ char *strmhz(char *buf, long hz) typedef int (init_fnc_t) (void); /************************************************************************ - * Init Utilities * + * Init Utilities ************************************************************************ * Some of this code should be moved into the core functions, * but let's get it working (again) first... @@ -383,6 +381,14 @@ board_init_f (ulong bootflag) WATCHDOG_RESET (); bd->bi_intfreq = gd->cpu_clk; /* Internal Freq, in Hz */ bd->bi_busfreq = gd->bus_clk; /* Bus Freq, in Hz */ +#ifdef CONFIG_PCI + bd->bi_pcifreq = gd->pci_clk; /* PCI Freq in Hz */ +#endif +#ifdef CONFIG_EXTRA_CLOCK + bd->bi_inpfreq = gd->inp_clk; /* input Freq in Hz */ + bd->bi_vcofreq = gd->vco_clk; /* vco Freq in Hz */ + bd->bi_flbfreq = gd->flb_clk; /* flexbus Freq in Hz */ +#endif bd->bi_baudrate = gd->baudrate; /* Console Baudrate */ #ifdef CFG_EXTBDINFO diff --git a/lib_m68k/interrupts.c b/lib_m68k/interrupts.c old mode 100755 new mode 100644 diff --git a/lib_m68k/m68k_linux.c b/lib_m68k/m68k_linux.c index 6c194f80aa7..fde1744e45c 100644 --- a/lib_m68k/m68k_linux.c +++ b/lib_m68k/m68k_linux.c @@ -25,6 +25,8 @@ #include #include #include +#include +#include #include DECLARE_GLOBAL_DATA_PTR; @@ -34,103 +36,189 @@ DECLARE_GLOBAL_DATA_PTR; #define LINUX_MAX_ENVS 256 #define LINUX_MAX_ARGS 256 -extern image_header_t header; /* from cmd_bootm.c */ - -extern int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]); - -static int linux_argc; -static char **linux_argv; - -static char **linux_env; -static char *linux_env_p; -static int linux_env_idx; +#ifdef CONFIG_SHOW_BOOT_PROGRESS +# include +# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) +#else +# define SHOW_BOOT_PROGRESS(arg) +#endif -static void linux_params_init (ulong start, char *commandline); -static void linux_env_set (char *env_name, char *env_val); +extern image_header_t header; -void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], - ulong addr, ulong * len_ptr, int verify) +void do_bootm_linux(cmd_tbl_t * cmdtp, int flag, + int argc, char *argv[], + ulong addr, ulong * len_ptr, int verify) { - ulong len = 0, checksum; + ulong sp; + ulong len, checksum; ulong initrd_start, initrd_end; + ulong cmd_start, cmd_end; + ulong initrd_high; ulong data; - void (*theKernel) (int, char **, char **, int *); + int initrd_copy_to_ram = 1; + char *cmdline; + char *s; + bd_t *kbd; + void (*kernel) (bd_t *, ulong, ulong, ulong, ulong); image_header_t *hdr = &header; - char *commandline = getenv ("bootargs"); - char env_buf[12]; - theKernel = - (void (*)(int, char **, char **, int *)) ntohl (hdr->ih_ep); + if ((s = getenv("initrd_high")) != NULL) { + /* a value of "no" or a similar string will act like 0, + * turning the "load high" feature off. This is intentional. + */ + initrd_high = simple_strtoul(s, NULL, 16); + if (initrd_high == ~0) + initrd_copy_to_ram = 0; + } else { /* not set, no restrictions to load high */ + initrd_high = ~0; + } + +#ifdef CONFIG_LOGBUFFER + kbd = gd->bd; + /* Prevent initrd from overwriting logbuffer */ + if (initrd_high < (kbd->bi_memsize - LOGBUFF_LEN - LOGBUFF_OVERHEAD)) + initrd_high = kbd->bi_memsize - LOGBUFF_LEN - LOGBUFF_OVERHEAD; + debug("## Logbuffer at 0x%08lX ", kbd->bi_memsize - LOGBUFF_LEN); +#endif + + /* + * Booting a (Linux) kernel image + * + * Allocate space for command line and board info - the + * address should be as high as possible within the reach of + * the kernel (see CFG_BOOTMAPSZ settings), but in unused + * memory, which means far enough below the current stack + * pointer. + */ + asm("movel %%a7, %%d0\n" + "movel %%d0, %0\n": "=d"(sp): :"%d0"); + debug("## Current stack ends at 0x%08lX ", sp); + + sp -= 2048; /* just to be sure */ + if (sp > CFG_BOOTMAPSZ) + sp = CFG_BOOTMAPSZ; + sp &= ~0xF; + + debug("=> set upper limit to 0x%08lX\n", sp); + + cmdline = (char *)((sp - CFG_BARGSIZE) & ~0xF); + kbd = (bd_t *) (((ulong) cmdline - sizeof(bd_t)) & ~0xF); + + if ((s = getenv("bootargs")) == NULL) + s = ""; + + strcpy(cmdline, s); + + cmd_start = (ulong) & cmdline[0]; + cmd_end = cmd_start + strlen(cmdline); + + *kbd = *(gd->bd); + +#ifdef DEBUG + printf("## cmdline at 0x%08lX ... 0x%08lX\n", cmd_start, cmd_end); + + do_bdinfo(NULL, 0, 0, NULL); +#endif + + if ((s = getenv("clocks_in_mhz")) != NULL) { + /* convert all clock information to MHz */ + kbd->bi_intfreq /= 1000000L; + kbd->bi_busfreq /= 1000000L; + } + + kernel = + (void (*)(bd_t *, ulong, ulong, ulong, ulong))ntohl(hdr->ih_ep); /* * Check if there is an initrd image */ + if (argc >= 3) { - show_boot_progress (9); + debug("Not skipping initrd\n"); + SHOW_BOOT_PROGRESS(9); - addr = simple_strtoul (argv[2], NULL, 16); + addr = simple_strtoul(argv[2], NULL, 16); - printf ("## Loading Ramdisk Image at %08lx ...\n", addr); + printf("## Loading RAMDisk Image at %08lx ...\n", addr); /* Copy header so we can blank CRC field for re-calculation */ - memcpy (&header, (char *) addr, sizeof (image_header_t)); + memmove(&header, (char *)addr, sizeof(image_header_t)); - if (ntohl (hdr->ih_magic) != IH_MAGIC) { - printf ("Bad Magic Number\n"); - show_boot_progress (-10); - do_reset (cmdtp, flag, argc, argv); + if (ntohl(hdr->ih_magic) != IH_MAGIC) { + puts("Bad Magic Number\n"); + SHOW_BOOT_PROGRESS(-10); + do_reset(cmdtp, flag, argc, argv); } data = (ulong) & header; - len = sizeof (image_header_t); + len = sizeof(image_header_t); - checksum = ntohl (hdr->ih_hcrc); + checksum = ntohl(hdr->ih_hcrc); hdr->ih_hcrc = 0; - if (crc32 (0, (char *) data, len) != checksum) { - printf ("Bad Header Checksum\n"); - show_boot_progress (-11); - do_reset (cmdtp, flag, argc, argv); + if (crc32(0, (uchar *) data, len) != checksum) { + puts("Bad Header Checksum\n"); + SHOW_BOOT_PROGRESS(-11); + do_reset(cmdtp, flag, argc, argv); } - show_boot_progress (10); + SHOW_BOOT_PROGRESS(10); - print_image_hdr (hdr); + print_image_hdr(hdr); - data = addr + sizeof (image_header_t); - len = ntohl (hdr->ih_size); + data = addr + sizeof(image_header_t); + len = ntohl(hdr->ih_size); if (verify) { ulong csum = 0; +#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG) + ulong cdata = data, edata = cdata + len; +#endif /* CONFIG_HW_WATCHDOG || CONFIG_WATCHDOG */ - printf (" Verifying Checksum ... "); - csum = crc32 (0, (char *) data, len); - if (csum != ntohl (hdr->ih_dcrc)) { - printf ("Bad Data CRC\n"); - show_boot_progress (-12); - do_reset (cmdtp, flag, argc, argv); + puts(" Verifying Checksum ... "); + +#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG) + + while (cdata < edata) { + ulong chunk = edata - cdata; + + if (chunk > CHUNKSZ) + chunk = CHUNKSZ; + csum = crc32(csum, (uchar *) cdata, chunk); + cdata += chunk; + + WATCHDOG_RESET(); } - printf ("OK\n"); +#else /* !(CONFIG_HW_WATCHDOG || CONFIG_WATCHDOG) */ + csum = crc32(0, (uchar *) data, len); +#endif /* CONFIG_HW_WATCHDOG || CONFIG_WATCHDOG */ + + if (csum != ntohl(hdr->ih_dcrc)) { + puts("Bad Data CRC\n"); + SHOW_BOOT_PROGRESS(-12); + do_reset(cmdtp, flag, argc, argv); + } + puts("OK\n"); } - show_boot_progress (11); + SHOW_BOOT_PROGRESS(11); if ((hdr->ih_os != IH_OS_LINUX) || (hdr->ih_arch != IH_CPU_M68K) || (hdr->ih_type != IH_TYPE_RAMDISK)) { - printf ("No Linux M68K Ramdisk Image\n"); - show_boot_progress (-13); - do_reset (cmdtp, flag, argc, argv); + puts("No Linux ColdFire Ramdisk Image\n"); + SHOW_BOOT_PROGRESS(-13); + do_reset(cmdtp, flag, argc, argv); } /* * Now check if we have a multifile image */ } else if ((hdr->ih_type == IH_TYPE_MULTI) && (len_ptr[1])) { - ulong tail = ntohl (len_ptr[0]) % 4; + u_long tail = ntohl(len_ptr[0]) % 4; int i; - show_boot_progress (13); + SHOW_BOOT_PROGRESS(13); /* skip kernel length and terminator */ data = (ulong) (&len_ptr[2]); @@ -138,130 +226,110 @@ void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], for (i = 1; len_ptr[i]; ++i) data += 4; /* add kernel length, and align */ - data += ntohl (len_ptr[0]); + data += ntohl(len_ptr[0]); if (tail) { data += 4 - tail; } - len = ntohl (len_ptr[1]); + len = ntohl(len_ptr[1]); } else { /* * no initrd image */ - show_boot_progress (14); + SHOW_BOOT_PROGRESS(14); - data = 0; + len = data = 0; } -#ifdef DEBUG if (!data) { - printf ("No initrd\n"); + debug("No initrd\n"); } -#endif if (data) { - initrd_start = data; - initrd_end = initrd_start + len; - } else { - initrd_start = 0; - initrd_end = 0; - } - - show_boot_progress (15); - -#ifdef DEBUG - printf ("## Transferring control to Linux (at address %08lx) ...\n", - (ulong) theKernel); -#endif - - linux_params_init (PHYSADDR (gd->bd->bi_boot_params), commandline); - - sprintf (env_buf, "%lu", gd->ram_size >> 20); - linux_env_set ("memsize", env_buf); - - sprintf (env_buf, "0x%08X", (uint) PHYSADDR (initrd_start)); - linux_env_set ("initrd_start", env_buf); - - sprintf (env_buf, "0x%X", (uint) (initrd_end - initrd_start)); - linux_env_set ("initrd_size", env_buf); - - sprintf (env_buf, "0x%08X", (uint) (gd->bd->bi_flashstart)); - linux_env_set ("flash_start", env_buf); - - sprintf (env_buf, "0x%X", (uint) (gd->bd->bi_flashsize)); - linux_env_set ("flash_size", env_buf); - - /* we assume that the kernel is in place */ - printf ("\nStarting kernel ...\n\n"); - - theKernel (linux_argc, linux_argv, linux_env, 0); -} - -static void linux_params_init (ulong start, char *line) -{ - char *next, *quote, *argp; - - linux_argc = 1; - linux_argv = (char **) start; - linux_argv[0] = 0; - argp = (char *) (linux_argv + LINUX_MAX_ARGS); - - next = line; - - while (line && *line && linux_argc < LINUX_MAX_ARGS) { - quote = strchr (line, '"'); - next = strchr (line, ' '); - - while (next != NULL && quote != NULL && quote < next) { - /* we found a left quote before the next blank - * now we have to find the matching right quote - */ - next = strchr (quote + 1, '"'); - if (next != NULL) { - quote = strchr (next + 1, '"'); - next = strchr (next + 1, ' '); + if (!initrd_copy_to_ram) { /* zero-copy ramdisk support */ + initrd_start = data; + initrd_end = initrd_start + len; + } else { + initrd_start = (ulong) kbd - len; + initrd_start &= ~(4096 - 1); /* align on page */ + + if (initrd_high) { + ulong nsp; + + /* + * the inital ramdisk does not need to be within + * CFG_BOOTMAPSZ as it is not accessed until after + * the mm system is initialised. + * + * do the stack bottom calculation again and see if + * the initrd will fit just below the monitor stack + * bottom without overwriting the area allocated + * above for command line args and board info. + */ + asm("movel %%a7, %%d0\n" + "movel %%d0, %0\n": "=d"(nsp): :"%d0"); + nsp -= 2048; /* just to be sure */ + nsp &= ~0xF; + + if (nsp > initrd_high) /* limit as specified */ + nsp = initrd_high; + + nsp -= len; + nsp &= ~(4096 - 1); /* align on page */ + + if (nsp >= sp) + initrd_start = nsp; } - } - if (next == NULL) { - next = line + strlen (line); + SHOW_BOOT_PROGRESS(12); + + debug + ("## initrd at 0x%08lX ... 0x%08lX (len=%ld=0x%lX)\n", + data, data + len - 1, len, len); + + initrd_end = initrd_start + len; + printf(" Loading Ramdisk to %08lx, end %08lx ... ", + initrd_start, initrd_end); +#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG) + { + size_t l = len; + void *to = (void *)initrd_start; + void *from = (void *)data; + + while (l > 0) { + size_t tail = + (l > CHUNKSZ) ? CHUNKSZ : l; + WATCHDOG_RESET(); + memmove(to, from, tail); + to += tail; + from += tail; + l -= tail; + } + } +#else /* !(CONFIG_HW_WATCHDOG || CONFIG_WATCHDOG) */ + memmove((void *)initrd_start, (void *)data, len); +#endif /* CONFIG_HW_WATCHDOG || CONFIG_WATCHDOG */ + puts("OK\n"); } - - linux_argv[linux_argc] = argp; - memcpy (argp, line, next - line); - argp[next - line] = 0; - - argp += next - line + 1; - linux_argc++; - - if (*next) - next++; - - line = next; + } else { + initrd_start = 0; + initrd_end = 0; } - linux_env = (char **) (((ulong) argp + 15) & ~15); - linux_env[0] = 0; - linux_env_p = (char *) (linux_env + LINUX_MAX_ENVS); - linux_env_idx = 0; -} - -static void linux_env_set (char *env_name, char *env_val) -{ - if (linux_env_idx < LINUX_MAX_ENVS - 1) { - linux_env[linux_env_idx] = linux_env_p; - - strcpy (linux_env_p, env_name); - linux_env_p += strlen (env_name); + debug("## Transferring control to Linux (at address %08lx) ...\n", + (ulong) kernel); - strcpy (linux_env_p, "="); - linux_env_p += 1; + SHOW_BOOT_PROGRESS(15); - strcpy (linux_env_p, env_val); - linux_env_p += strlen (env_val); - - linux_env_p++; - linux_env[++linux_env_idx] = 0; - } + /* + * Linux Kernel Parameters (passing board info data): + * r3: ptr to board info data + * r4: initrd_start or 0 if no initrd + * r5: initrd_end - unused if r4 is 0 + * r6: Start of command line string + * r7: End of command line string + */ + (*kernel) (kbd, initrd_start, initrd_end, cmd_start, cmd_end); + /* does not return */ } -- cgit v1.3.1 From 14778585d1389d86d5846efec29e5fce892680ce Mon Sep 17 00:00:00 2001 From: Tony Li Date: Fri, 17 Aug 2007 10:35:59 +0800 Subject: mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support The patch split the PIB init code from pci.c to a single file board/freescale/common/pq-mds-pib.c And add Qoc3 ATM card support for MPC8360EMDS and MPC832XEMDS board. Signed-off-by Tony Li --- board/freescale/common/pq-mds-pib.c | 101 ++++++++++++++++++++++++++++++++++++ board/freescale/common/pq-mds-pib.h | 9 ++++ board/mpc832xemds/Makefile | 2 +- board/mpc832xemds/mpc832xemds.c | 11 ++++ board/mpc832xemds/pci.c | 40 -------------- board/mpc8360emds/Makefile | 2 +- board/mpc8360emds/mpc8360emds.c | 11 ++++ board/mpc8360emds/pci.c | 40 -------------- include/configs/MPC832XEMDS.h | 3 ++ include/configs/MPC8360EMDS.h | 7 ++- 10 files changed, 142 insertions(+), 84 deletions(-) create mode 100644 board/freescale/common/pq-mds-pib.c create mode 100644 board/freescale/common/pq-mds-pib.h (limited to 'include/configs') diff --git a/board/freescale/common/pq-mds-pib.c b/board/freescale/common/pq-mds-pib.c new file mode 100644 index 00000000000..9799117a93a --- /dev/null +++ b/board/freescale/common/pq-mds-pib.c @@ -0,0 +1,101 @@ +/* + * Copyright (C) 2007 Freescale Semiconductor, Inc. + * + * Tony Li + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + */ + +#include +#include +#include + +#include "pq-mds-pib.h" + +int pib_init(void) +{ + u8 val8; + u8 orig_i2c_bus; + + /* Switch temporarily to I2C bus #2 */ + orig_i2c_bus = i2c_get_bus_num(); + i2c_set_bus_num(1); +#if defined(CONFIG_PCI) && !defined(CONFIG_PCISLAVE) + /* Assign PIB PMC slot to desired PCI bus */ + val8 = 0; + i2c_write(0x23, 0x6, 1, &val8, 1); + i2c_write(0x23, 0x7, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x23, 0x2, 1, &val8, 1); + i2c_write(0x23, 0x3, 1, &val8, 1); + + val8 = 0; + i2c_write(0x26, 0x6, 1, &val8, 1); + val8 = 0x34; + i2c_write(0x26, 0x7, 1, &val8, 1); +#if defined(CONFIG_MPC832XEMDS) + val8 = 0xf9; /* PMC2, PMC3 slot to PCI bus */ +#else + val8 = 0xf3; /* PMC1, PMC2, PMC3 slot to PCI bus */ +#endif + i2c_write(0x26, 0x2, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x26, 0x3, 1, &val8, 1); + + val8 = 0; + i2c_write(0x27, 0x6, 1, &val8, 1); + i2c_write(0x27, 0x7, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x27, 0x2, 1, &val8, 1); + val8 = 0xef; + i2c_write(0x27, 0x3, 1, &val8, 1); + + eieio(); + +#if defined(CONFIG_MPC832XEMDS) + printf("PCI 32bit bus on PMC2 &PMC3\n"); +#else + printf("PCI 32bit bus on PMC1 & PMC2 &PMC3\n"); +#endif +#endif + +#if defined(CONFIG_PQ_MDS_PIB_ATM) +#if defined(CONFIG_MPC8360EMDS) + val8 = 0; + i2c_write(0x20, 0x6, 1, &val8, 1); + i2c_write(0x20, 0x7, 1, &val8, 1); + + val8 = 0xdf; + i2c_write(0x20, 0x2, 1, &val8, 1); + val8 = 0xf7; + i2c_write(0x20, 0x3, 1, &val8, 1); + + eieio(); + + printf("QOC3 ATM card on PMC0\n"); +#elif defined(CONFIG_MPC832XEMDS) + val = 0; + i2c_write(0x26, 0x7, 1, &val, 1); + val = 0xf7; + i2c_write(0x26, 0x3, 1, &val, 1); + + val = 0; + i2c_write(0x21, 0x6, 1, &val, 1); + i2c_write(0x21, 0x7, 1, &val, 1); + + val = 0xdf; + i2c_write(0x21, 0x2, 1, &val, 1); + val = 0xef; + i2c_write(0x21, 0x3, 1, &val, 1); + + eieio(); + + printf("QOC3 ATM card on PMC1\n"); +#endif +#endif + /* Reset to original I2C bus */ + i2c_set_bus_num(orig_i2c_bus); + return 0; +} diff --git a/board/freescale/common/pq-mds-pib.h b/board/freescale/common/pq-mds-pib.h new file mode 100644 index 00000000000..67066fd118d --- /dev/null +++ b/board/freescale/common/pq-mds-pib.h @@ -0,0 +1,9 @@ +/* + * Copyright (C) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + */ + +extern int pib_init(void); diff --git a/board/mpc832xemds/Makefile b/board/mpc832xemds/Makefile index 5ec7a871d4d..4da74b8277e 100644 --- a/board/mpc832xemds/Makefile +++ b/board/mpc832xemds/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o pci.o +COBJS := $(BOARD).o pci.o ../freescale/common/pq-mds-pib.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/mpc832xemds/mpc832xemds.c b/board/mpc832xemds/mpc832xemds.c index f70783e73ab..207fcdf8be3 100644 --- a/board/mpc832xemds/mpc832xemds.c +++ b/board/mpc832xemds/mpc832xemds.c @@ -32,6 +32,9 @@ #elif defined(CONFIG_OF_LIBFDT) #include #endif +#if defined(CONFIG_PQ_MDS_PIB) +#include "../freescale/common/pq-mds-pib.h" +#endif const qe_iop_conf_t qe_iop_conf_tab[] = { /* ETH3 */ @@ -88,6 +91,14 @@ int board_early_init_f(void) return 0; } +int board_early_init_r(void) +{ +#ifdef CONFIG_PQ_MDS_PIB + pib_init(); +#endif + return 0; +} + int fixed_sdram(void); long int initdram(int board_type) diff --git a/board/mpc832xemds/pci.c b/board/mpc832xemds/pci.c index c2f61ea6ad7..6bc35c70f2d 100644 --- a/board/mpc832xemds/pci.c +++ b/board/mpc832xemds/pci.c @@ -131,7 +131,6 @@ void pci_init_board(void) volatile pcictrl83xx_t *pci_ctrl; volatile pciconf83xx_t *pci_conf; - u8 val8, orig_i2c_bus; u16 reg16; u32 val32; u32 dev; @@ -199,43 +198,6 @@ void pci_init_board(void) PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | PIWAR_IWS_2G; - /* - * Assign PIB PMC slot to desired PCI bus - */ - - /* Switch temporarily to I2C bus #2 */ - orig_i2c_bus = i2c_get_bus_num(); - i2c_set_bus_num(1); - - val8 = 0; - i2c_write(0x23, 0x6, 1, &val8, 1); - i2c_write(0x23, 0x7, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x23, 0x2, 1, &val8, 1); - i2c_write(0x23, 0x3, 1, &val8, 1); - - val8 = 0; - i2c_write(0x26, 0x6, 1, &val8, 1); - val8 = 0x34; - i2c_write(0x26, 0x7, 1, &val8, 1); - - val8 = 0xf9; /* PMC2, PMC3 slot to PCI bus */ - i2c_write(0x26, 0x2, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x26, 0x3, 1, &val8, 1); - - val8 = 0; - i2c_write(0x27, 0x6, 1, &val8, 1); - i2c_write(0x27, 0x7, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x27, 0x2, 1, &val8, 1); - val8 = 0xef; - i2c_write(0x27, 0x3, 1, &val8, 1); - asm("eieio"); - - /* Reset to original I2C bus */ - i2c_set_bus_num(orig_i2c_bus); - /* * Release PCI RST Output signal */ @@ -292,8 +254,6 @@ void pci_init_board(void) pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80); pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08); - printf("PCI 32bit bus on PMC2 & PMC3\n"); - /* * Hose scan. */ diff --git a/board/mpc8360emds/Makefile b/board/mpc8360emds/Makefile index 5ec7a871d4d..4da74b8277e 100644 --- a/board/mpc8360emds/Makefile +++ b/board/mpc8360emds/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o pci.o +COBJS := $(BOARD).o pci.o ../freescale/common/pq-mds-pib.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/mpc8360emds/mpc8360emds.c b/board/mpc8360emds/mpc8360emds.c index 386173351ca..d6d0f4e25f7 100644 --- a/board/mpc8360emds/mpc8360emds.c +++ b/board/mpc8360emds/mpc8360emds.c @@ -30,6 +30,9 @@ #elif defined(CONFIG_OF_LIBFDT) #include #endif +#if defined(CONFIG_PQ_MDS_PIB) +#include "../freescale/common/pq-mds-pib.h" +#endif const qe_iop_conf_t qe_iop_conf_tab[] = { /* GETH1 */ @@ -106,6 +109,14 @@ int board_early_init_f(void) return 0; } +int board_early_init_r(void) +{ +#ifdef CONFIG_PQ_MDS_PIB + pib_init(); +#endif + return 0; +} + #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) extern void ddr_enable_ecc(unsigned int dram_size); #endif diff --git a/board/mpc8360emds/pci.c b/board/mpc8360emds/pci.c index 79812853e88..cf7ef90443f 100644 --- a/board/mpc8360emds/pci.c +++ b/board/mpc8360emds/pci.c @@ -131,7 +131,6 @@ void pci_init_board(void) volatile pcictrl83xx_t *pci_ctrl; volatile pciconf83xx_t *pci_conf; - u8 val8, orig_i2c_bus; u16 reg16; u32 val32; u32 dev; @@ -199,43 +198,6 @@ void pci_init_board(void) PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | PIWAR_IWS_2G; - /* - * Assign PIB PMC slot to desired PCI bus - */ - - /* Switch temporarily to I2C bus #2 */ - orig_i2c_bus = i2c_get_bus_num(); - i2c_set_bus_num(1); - - val8 = 0; - i2c_write(0x23, 0x6, 1, &val8, 1); - i2c_write(0x23, 0x7, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x23, 0x2, 1, &val8, 1); - i2c_write(0x23, 0x3, 1, &val8, 1); - - val8 = 0; - i2c_write(0x26, 0x6, 1, &val8, 1); - val8 = 0x34; - i2c_write(0x26, 0x7, 1, &val8, 1); - - val8 = 0xf3; /*PMC1, PMC2, PMC3 slot to PCI bus */ - i2c_write(0x26, 0x2, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x26, 0x3, 1, &val8, 1); - - val8 = 0; - i2c_write(0x27, 0x6, 1, &val8, 1); - i2c_write(0x27, 0x7, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x27, 0x2, 1, &val8, 1); - val8 = 0xef; - i2c_write(0x27, 0x3, 1, &val8, 1); - asm("eieio"); - - /* Reset to original I2C bus */ - i2c_set_bus_num(orig_i2c_bus); - /* * Release PCI RST Output signal */ @@ -292,8 +254,6 @@ void pci_init_board(void) pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80); pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08); - printf("PCI 32bit bus on PMC1 & PMC2 & PMC3\n"); - /* * Hose scan. */ diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index e8c6b75025b..efc317288e2 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -30,6 +30,8 @@ #define CONFIG_MPC83XX 1 /* MPC83xx family */ #define CONFIG_MPC832X 1 /* MPC832x CPU specific */ #define CONFIG_MPC832XEMDS 1 /* MPC832XEMDS board specific */ +#undef CONFIG_PQ_MDS_PIB /* POWERQUICC MDS Platform IO Board */ +#undef CONFIG_PQ_MDS_PIB_ATM /* QOC3 ATM card */ /* * System Clock Setup @@ -87,6 +89,7 @@ #define CFG_SICRL 0x00000000 #define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ +#define CONFIG_BOARD_EARLY_INIT_R /* * IMMR new address diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index 4b32a140e81..094b66e7c9d 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -32,6 +32,8 @@ #define CONFIG_MPC83XX 1 /* MPC83XX family */ #define CONFIG_MPC8360 1 /* MPC8360 CPU specific */ #define CONFIG_MPC8360EMDS 1 /* MPC8360EMDS board specific */ +#undef CONFIG_PQ_MDS_PIB /* POWERQUICC MDS Platform IO Board */ +#undef CONFIG_PQ_MDS_PIB_ATM /* QOC3 ATM card */ /* * System Clock Setup @@ -88,6 +90,7 @@ #define CFG_SICRL 0x40000000 #define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ +#define CONFIG_BOARD_EARLY_INIT_R /* * IMMR new address @@ -309,13 +312,13 @@ /* * CS4 on Local Bus, to PIB */ -#define CFG_BR4_PRELIM 0xf8008801 /* CS4 base address at 0xf8008000 */ +#define CFG_BR4_PRELIM 0xf8010801 /* CS4 base address at 0xf8010000 */ #define CFG_OR4_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */ /* * CS5 on Local Bus, to PIB */ -#define CFG_BR5_PRELIM 0xf8010801 /* CS5 base address at 0xf8010000 */ +#define CFG_BR5_PRELIM 0xf8008801 /* CS5 base address at 0xf8008000 */ #define CFG_OR5_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */ /* -- cgit v1.3.1 From bbea46f76f767b919070b4829bf34c86bd223248 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Thu, 16 Aug 2007 22:52:48 -0500 Subject: mpc83xx: implement board_add_ram_info add board_add_ram_info, to make memory diagnostic output more consistent. u-boot banner output now looks like: DRAM: 256 MB (DDR1, 64-bit, ECC on) and for boards with SDRAM on the local bus, a line such as this is added: SDRAM: 64 MB (local bus) also replaced some magic numbers with their equivalent define names. Signed-off-by: Kim Phillips --- board/freescale/mpc8323erdb/mpc8323erdb.c | 2 -- board/mpc8313erdb/sdram.c | 3 -- board/mpc832xemds/mpc832xemds.c | 2 -- board/mpc8349emds/mpc8349emds.c | 8 +---- board/mpc8349itx/mpc8349itx.c | 3 +- board/mpc8360emds/mpc8360emds.c | 5 +-- board/sbc8349/sbc8349.c | 5 +-- board/tqm834x/tqm834x.c | 4 +-- cpu/mpc83xx/spd_sdram.c | 54 ++++++++++++++++++++++--------- include/configs/MPC8313ERDB.h | 4 +-- include/mpc83xx.h | 5 +-- 11 files changed, 50 insertions(+), 45 deletions(-) (limited to 'include/configs') diff --git a/board/freescale/mpc8323erdb/mpc8323erdb.c b/board/freescale/mpc8323erdb/mpc8323erdb.c index 850d1c370e7..e7386130098 100644 --- a/board/freescale/mpc8323erdb/mpc8323erdb.c +++ b/board/freescale/mpc8323erdb/mpc8323erdb.c @@ -91,8 +91,6 @@ long int initdram(int board_type) msize = fixed_sdram(); - puts("\n DDR RAM: "); - /* return total bus SDRAM size(bytes) -- DDR */ return (msize * 1024 * 1024); } diff --git a/board/mpc8313erdb/sdram.c b/board/mpc8313erdb/sdram.c index 4b6778837f2..e6e84107eb2 100644 --- a/board/mpc8313erdb/sdram.c +++ b/board/mpc8313erdb/sdram.c @@ -112,8 +112,6 @@ long int initdram(int board_type) if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) return -1; - puts("Initializing\n"); - /* DDR SDRAM - Main SODIMM */ msize = fixed_sdram(); @@ -127,7 +125,6 @@ long int initdram(int board_type) resume_from_sleep(); #endif - puts(" DDR RAM: "); /* return total bus SDRAM size(bytes) -- DDR */ return msize; } diff --git a/board/mpc832xemds/mpc832xemds.c b/board/mpc832xemds/mpc832xemds.c index 207fcdf8be3..7a45ded76a5 100644 --- a/board/mpc832xemds/mpc832xemds.c +++ b/board/mpc832xemds/mpc832xemds.c @@ -114,8 +114,6 @@ long int initdram(int board_type) msize = fixed_sdram(); - puts("\n DDR RAM: "); - /* return total bus SDRAM size(bytes) -- DDR */ return (msize * 1024 * 1024); } diff --git a/board/mpc8349emds/mpc8349emds.c b/board/mpc8349emds/mpc8349emds.c index 2ad25ec5060..39c09162760 100644 --- a/board/mpc8349emds/mpc8349emds.c +++ b/board/mpc8349emds/mpc8349emds.c @@ -70,8 +70,6 @@ long int initdram (int board_type) if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) return -1; - puts("Initializing\n"); - /* DDR SDRAM - Main SODIMM */ im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; #if defined(CONFIG_SPD_EEPROM) @@ -90,7 +88,7 @@ long int initdram (int board_type) */ ddr_enable_ecc(msize * 1024 * 1024); #endif - puts(" DDR RAM: "); + /* return total bus SDRAM size(bytes) -- DDR */ return (msize * 1024 * 1024); } @@ -191,9 +189,6 @@ void sdram_init(void) volatile lbus83xx_t *lbc= &immap->lbus; uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE; - puts("\n SDRAM on Local Bus: "); - print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); - /* * Setup SDRAM Base and Option Registers, already done in cpu_init.c */ @@ -255,7 +250,6 @@ void sdram_init(void) #else void sdram_init(void) { - puts(" SDRAM on Local Bus is NOT available!\n"); } #endif diff --git a/board/mpc8349itx/mpc8349itx.c b/board/mpc8349itx/mpc8349itx.c index 125e6c0864a..c82f7847a22 100644 --- a/board/mpc8349itx/mpc8349itx.c +++ b/board/mpc8349itx/mpc8349itx.c @@ -76,7 +76,7 @@ int fixed_sdram(void) im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;/* Was "2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT" */ - im->ddr.sdram_cfg = SDRAM_CFG_SREN | SDRAM_CFG_SDRAM_TYPE_DDR; + im->ddr.sdram_cfg = SDRAM_CFG_SREN | SDRAM_CFG_SDRAM_TYPE_DDR1; im->ddr.sdram_mode = (0x0000 << SDRAM_MODE_ESD_SHIFT) | (0x0032 << SDRAM_MODE_SD_SHIFT); im->ddr.sdram_interval = @@ -162,7 +162,6 @@ long int initdram(int board_type) ddr_enable_ecc(msize * 1048576); #endif - puts(" DDR RAM: "); /* return total bus RAM size(bytes) */ return msize * 1024 * 1024; } diff --git a/board/mpc8360emds/mpc8360emds.c b/board/mpc8360emds/mpc8360emds.c index d6d0f4e25f7..0751c6fafdb 100644 --- a/board/mpc8360emds/mpc8360emds.c +++ b/board/mpc8360emds/mpc8360emds.c @@ -149,7 +149,7 @@ long int initdram(int board_type) * Initialize SDRAM if it is on local bus. */ sdram_init(); - puts(" DDR RAM: "); + /* return total bus SDRAM size(bytes) -- DDR */ return (msize * 1024 * 1024); } @@ -234,8 +234,6 @@ void sdram_init(void) volatile lbus83xx_t *lbc = &immap->lbus; uint *sdram_addr = (uint *) CFG_LBC_SDRAM_BASE; - puts("\n SDRAM on Local Bus: "); - print_size(CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); /* * Setup SDRAM Base and Option Registers, already done in cpu_init.c */ @@ -291,7 +289,6 @@ void sdram_init(void) #else void sdram_init(void) { - puts("SDRAM on Local Bus is NOT available!\n"); } #endif diff --git a/board/sbc8349/sbc8349.c b/board/sbc8349/sbc8349.c index 4cd447e097f..86166ea4439 100644 --- a/board/sbc8349/sbc8349.c +++ b/board/sbc8349/sbc8349.c @@ -64,8 +64,6 @@ long int initdram (int board_type) if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) return -1; - puts("Initializing\n"); - /* DDR SDRAM - Main SODIMM */ im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; #if defined(CONFIG_SPD_EEPROM) @@ -84,7 +82,6 @@ long int initdram (int board_type) */ ddr_enable_ecc(msize * 1024 * 1024); #endif - puts(" DDR RAM: "); /* return total bus SDRAM size(bytes) -- DDR */ return (msize * 1024 * 1024); } @@ -130,7 +127,7 @@ int fixed_sdram(void) #if defined(CONFIG_DDR_2T_TIMING) | SDRAM_CFG_2T_EN #endif - | 2 << SDRAM_CFG_SDRAM_TYPE_SHIFT; + | SDRAM_CFG_SDRAM_TYPE_DDR1; #if defined (CONFIG_DDR_32BIT) /* for 32-bit mode burst length is 8 */ im->ddr.sdram_cfg |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE); diff --git a/board/tqm834x/tqm834x.c b/board/tqm834x/tqm834x.c index 9c35e22c8e1..7d0b0554840 100644 --- a/board/tqm834x/tqm834x.c +++ b/board/tqm834x/tqm834x.c @@ -114,7 +114,7 @@ long int initdram (int board_type) /* enable DDR controller */ im->ddr.sdram_cfg = (SDRAM_CFG_MEM_EN | SDRAM_CFG_SREN | - SDRAM_CFG_SDRAM_TYPE_DDR); + SDRAM_CFG_SDRAM_TYPE_DDR1); SYNC; /* size detection */ @@ -388,7 +388,7 @@ static void set_ddr_config(void) { /* don't enable DDR controller yet */ im->ddr.sdram_cfg = SDRAM_CFG_SREN | - SDRAM_CFG_SDRAM_TYPE_DDR; + SDRAM_CFG_SDRAM_TYPE_DDR1; SYNC; /* Set SDRAM mode */ diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c index 54f0c83d454..040836c42e0 100644 --- a/cpu/mpc83xx/spd_sdram.c +++ b/cpu/mpc83xx/spd_sdram.c @@ -34,6 +34,30 @@ #include #include +void board_add_ram_info(int use_default) +{ + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile ddr83xx_t *ddr = &immap->ddr; + + printf(" (DDR%d", ((ddr->sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) + >> SDRAM_CFG_SDRAM_TYPE_SHIFT) - 1); + + if (ddr->sdram_cfg & SDRAM_CFG_32_BE) + puts(", 32-bit"); + else + puts(", 64-bit"); + + if (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) + puts(", ECC on)"); + else + puts(", ECC off)"); + +#if defined(CFG_LB_SDRAM) && defined(CFG_LBC_SDRAM_SIZE) + puts("\nSDRAM: "); + print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, " (local bus)"); +#endif +} + #ifdef CONFIG_SPD_EEPROM DECLARE_GLOBAL_DATA_PTR; @@ -109,7 +133,7 @@ long int spd_sdram() unsigned int n_ranks; unsigned int odt_rd_cfg, odt_wr_cfg; unsigned char twr_clk, twtr_clk; - unsigned char sdram_type; + unsigned int sdram_type; unsigned int memsize; unsigned int law_size; unsigned char caslat, caslat_ctrl; @@ -137,7 +161,7 @@ long int spd_sdram() #endif /* Check the memory type */ if (spd.mem_type != SPD_MEMTYPE_DDR && spd.mem_type != SPD_MEMTYPE_DDR2) { - printf("DDR: Module mem type is %02X\n", spd.mem_type); + debug("DDR: Module mem type is %02X\n", spd.mem_type); return 0; } @@ -578,17 +602,17 @@ long int spd_sdram() burstlen = 0x03; /* 32 bit data bus, burst len is 8 */ else burstlen = 0x02; /* 32 bit data bus, burst len is 4 */ - printf("\n DDR DIMM: data bus width is 32 bit"); + debug("\n DDR DIMM: data bus width is 32 bit"); } else { burstlen = 0x02; /* Others act as 64 bit bus, burst len is 4 */ - printf("\n DDR DIMM: data bus width is 64 bit"); + debug("\n DDR DIMM: data bus width is 64 bit"); } /* Is this an ECC DDR chip? */ if (spd.config == 0x02) - printf(" with ECC\n"); + debug(" with ECC\n"); else - printf(" without ECC\n"); + debug(" without ECC\n"); /* Burst length is always 4 for 64 bit data bus, 8 for 32 bit data bus, Burst type is sequential @@ -718,26 +742,26 @@ long int spd_sdram() * sdram_cfg[13] = 0 (8_BE =0, 4-beat bursts) */ if (spd.mem_type == SPD_MEMTYPE_DDR) - sdram_type = 2; + sdram_type = SDRAM_CFG_SDRAM_TYPE_DDR1; else - sdram_type = 3; + sdram_type = SDRAM_CFG_SDRAM_TYPE_DDR1; sdram_cfg = (0 - | (1 << 31) /* DDR enable */ - | (1 << 30) /* Self refresh */ - | (sdram_type << 24) /* SDRAM type */ + | SDRAM_CFG_MEM_EN /* DDR enable */ + | SDRAM_CFG_SREN /* Self refresh */ + | sdram_type /* SDRAM type */ ); /* sdram_cfg[3] = RD_EN - registered DIMM enable */ if (spd.mod_attr & 0x02) - sdram_cfg |= 0x10000000; + sdram_cfg |= SDRAM_CFG_RD_EN; /* The DIMM is 32bit width */ if (spd.dataw_lsb == 0x20) { if (spd.mem_type == SPD_MEMTYPE_DDR) - sdram_cfg |= 0x000C0000; + sdram_cfg |= SDRAM_CFG_32_BE | SDRAM_CFG_8_BE; if (spd.mem_type == SPD_MEMTYPE_DDR2) - sdram_cfg |= 0x00080000; + sdram_cfg |= SDRAM_CFG_32_BE; } ddrc_ecc_enable = 0; @@ -758,7 +782,7 @@ long int spd_sdram() debug("DDR:err_disable=0x%08x\n", ddr->err_disable); debug("DDR:err_sbe=0x%08x\n", ddr->err_sbe); #endif - printf(" DDRC ECC mode: %s\n", ddrc_ecc_enable ? "ON":"OFF"); + debug(" DDRC ECC mode: %s\n", ddrc_ecc_enable ? "ON":"OFF"); #if defined(CONFIG_DDR_2T_TIMING) /* diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index e2ec0bc2200..db79ce28f31 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -113,12 +113,12 @@ /* 0x03200064 */ #if defined(CONFIG_DDR_2T_TIMING) #define CFG_SDRAM_CFG ( SDRAM_CFG_SREN \ - | 3 << SDRAM_CFG_SDRAM_TYPE_SHIFT \ + | SDRAM_CFG_SDRAM_TYPE_DDR2 \ | SDRAM_CFG_2T_EN \ | SDRAM_CFG_DBW_32 ) #else #define CFG_SDRAM_CFG ( SDRAM_CFG_SREN \ - | 3 << SDRAM_CFG_SDRAM_TYPE_SHIFT \ + | SDRAM_CFG_SDRAM_TYPE_DDR2 \ | SDRAM_CFG_32_BE ) /* 0x43080000 */ #endif diff --git a/include/mpc83xx.h b/include/mpc83xx.h index 829dbf93878..4d32c6a3764 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -705,8 +705,9 @@ #define SDRAM_CFG_SREN 0x40000000 #define SDRAM_CFG_ECC_EN 0x20000000 #define SDRAM_CFG_RD_EN 0x10000000 -#define SDRAM_CFG_SDRAM_TYPE 0x03000000 -#define SDRAM_CFG_SDRAM_TYPE_DDR 0x02000000 +#define SDRAM_CFG_SDRAM_TYPE_DDR1 0x02000000 +#define SDRAM_CFG_SDRAM_TYPE_DDR2 0x03000000 +#define SDRAM_CFG_SDRAM_TYPE_MASK 0x07000000 #define SDRAM_CFG_SDRAM_TYPE_SHIFT 24 #define SDRAM_CFG_DYN_PWR 0x00200000 #define SDRAM_CFG_32_BE 0x00080000 -- cgit v1.3.1 From 4a442d3186b31893b4f77c6e82f63c4517a5224b Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 16 Aug 2007 19:23:50 -0500 Subject: ColdFire: Add M5235EVB Platform for MCF523x Signed-off-by: TsiChungLiew --- CREDITS | 2 +- MAINTAINERS | 1 + MAKEALL | 1 + Makefile | 25 +- board/freescale/m5235evb/Makefile | 44 ++ board/freescale/m5235evb/config.mk | 28 ++ board/freescale/m5235evb/m5235evb.c | 117 +++++ board/freescale/m5235evb/mii.c | 307 ++++++++++++ board/freescale/m5235evb/u-boot.16 | 145 ++++++ board/freescale/m5235evb/u-boot.32 | 153 ++++++ board/freescale/m5235evb/u-boot.lds | 145 ++++++ cpu/mcf523x/Makefile | 48 ++ cpu/mcf523x/config.mk | 27 ++ cpu/mcf523x/cpu.c | 109 +++++ cpu/mcf523x/cpu_init.c | 145 ++++++ cpu/mcf523x/interrupts.c | 49 ++ cpu/mcf523x/speed.c | 48 ++ cpu/mcf523x/start.S | 340 ++++++++++++++ include/asm-m68k/immap.h | 29 ++ include/asm-m68k/immap_5235.h | 378 +++++++++++++++ include/asm-m68k/m5235.h | 905 ++++++++++++++++++++++++++++++++++++ include/configs/M5235EVB.h | 261 +++++++++++ 22 files changed, 3303 insertions(+), 4 deletions(-) create mode 100644 board/freescale/m5235evb/Makefile create mode 100644 board/freescale/m5235evb/config.mk create mode 100644 board/freescale/m5235evb/m5235evb.c create mode 100644 board/freescale/m5235evb/mii.c create mode 100644 board/freescale/m5235evb/u-boot.16 create mode 100644 board/freescale/m5235evb/u-boot.32 create mode 100644 board/freescale/m5235evb/u-boot.lds create mode 100644 cpu/mcf523x/Makefile create mode 100644 cpu/mcf523x/config.mk create mode 100644 cpu/mcf523x/cpu.c create mode 100644 cpu/mcf523x/cpu_init.c create mode 100644 cpu/mcf523x/interrupts.c create mode 100644 cpu/mcf523x/speed.c create mode 100644 cpu/mcf523x/start.S create mode 100644 include/asm-m68k/immap_5235.h create mode 100644 include/asm-m68k/m5235.h create mode 100644 include/configs/M5235EVB.h (limited to 'include/configs') diff --git a/CREDITS b/CREDITS index f30b2228fbb..6e44db47085 100644 --- a/CREDITS +++ b/CREDITS @@ -491,7 +491,7 @@ W: www.monstr.eu N: TsiChung Liew E: Tsi-Chung.Liew@freescale.com -D: Support for ColdFire MCF532x, MCF5445x +D: Support for ColdFire MCF523x, MCF532x, MCF5445x W: www.freescale.com N: Hayden Fraser diff --git a/MAINTAINERS b/MAINTAINERS index 7fde6d99efe..d15028665ef 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -608,6 +608,7 @@ Zachary P. Landau TsiChung Liew + M5235EVB mcf52x2 M5329EVB mcf532x M54455EVB mcf5445x diff --git a/MAKEALL b/MAKEALL index b7ed0f4305c..125c78275ea 100755 --- a/MAKEALL +++ b/MAKEALL @@ -618,6 +618,7 @@ LIST_coldfire=" \ EB+MCF-EV123 \ EB+MCF-EV123_internal \ idmr \ + M5235EVB \ M5249EVB \ M5253EVB \ M5271EVB \ diff --git a/Makefile b/Makefile index 201ad0e7789..7b2b0252dac 100644 --- a/Makefile +++ b/Makefile @@ -1639,6 +1639,25 @@ ZPC1900_config: unconfig ## Coldfire ######################################################################### +M5235EVB_config \ +M5235EVB_Flash16_config \ +M5235EVB_Flash32_config: unconfig + @case "$@" in \ + M5235EVB_config) FLASH=16;; \ + M5235EVB_Flash16_config) FLASH=16;; \ + M5235EVB_Flash32_config) FLASH=32;; \ + esac; \ + >include/config.h ; \ + if [ "$${FLASH}" != "16" ] ; then \ + echo "#define NORFLASH_PS32BIT 1" >> include/config.h ; \ + echo "TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \ + cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \ + else \ + echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \ + cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \ + fi + @$(MKCONFIG) -a M5235EVB m68k mcf523x m5235evb freescale + M5249EVB_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale @@ -1710,13 +1729,13 @@ M54455EVB_i66_config : unconfig esac; \ >include/config.h ; \ if [ "$${FLASH}" == "INTEL" ] ; then \ - echo "#undef CFG_ATMEL_BOOT" >> include/config.h ; \ + echo "#undef CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \ echo "... with INTEL boot..." ; \ else \ - echo "#define CFG_ATMEL_BOOT" >> include/config.h ; \ + echo "#define CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \ echo "... with ATMEL boot..." ; \ fi; \ - echo "#define CFG_INPUT_CLKSRC $${FREQ}" >>include/config.h ; \ + echo "#define CFG_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \ echo "... with $${FREQ}Hz input clock" @$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale diff --git a/board/freescale/m5235evb/Makefile b/board/freescale/m5235evb/Makefile new file mode 100644 index 00000000000..74c25286982 --- /dev/null +++ b/board/freescale/m5235evb/Makefile @@ -0,0 +1,44 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o mii.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/m5235evb/config.mk b/board/freescale/m5235evb/config.mk new file mode 100644 index 00000000000..ada38dd9513 --- /dev/null +++ b/board/freescale/m5235evb/config.mk @@ -0,0 +1,28 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Coldfire contribution by Bernhard Kuhn +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +/*TEXT_BASE = 0xFFC00000*/ +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp + +PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) \ No newline at end of file diff --git a/board/freescale/m5235evb/m5235evb.c b/board/freescale/m5235evb/m5235evb.c new file mode 100644 index 00000000000..585854cd91b --- /dev/null +++ b/board/freescale/m5235evb/m5235evb.c @@ -0,0 +1,117 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +int checkboard(void) +{ + puts("Board: "); + puts("Freescale M5235 EVB\n"); + return 0; +}; + +long int initdram(int board_type) +{ + volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM); + volatile gpio_t *gpio = (volatile gpio_t *)(MMAP_GPIO); + u32 dramsize, i, dramclk; + + /* + * When booting from external Flash, the port-size is less than + * the port-size of SDRAM. In this case it is necessary to enable + * Data[15:0] on Port Address/Data. + */ + gpio->par_ad = + GPIO_PAR_AD_ADDR23 | GPIO_PAR_AD_ADDR22 | GPIO_PAR_AD_ADDR21 | + GPIO_PAR_AD_DATAL; + + /* Initialize PAR to enable SDRAM signals */ + gpio->par_sdram = + GPIO_PAR_SDRAM_SDWE | GPIO_PAR_SDRAM_SCAS | GPIO_PAR_SDRAM_SRAS | + GPIO_PAR_SDRAM_SCKE | GPIO_PAR_SDRAM_SDCS(3); + + dramsize = CFG_SDRAM_SIZE * 0x100000; + for (i = 0x13; i < 0x20; i++) { + if (dramsize == (1 << i)) + break; + } + i--; + + if (!(sdram->dacr0 & SDRAMC_DARCn_RE)) { + dramclk = gd->bus_clk / (CFG_HZ * CFG_HZ); + + /* Initialize DRAM Control Register: DCR */ + sdram->dcr = SDRAMC_DCR_RTIM_9CLKS | + SDRAMC_DCR_RTIM_6CLKS | SDRAMC_DCR_RC((15 * dramclk) >> 4); + + /* Initialize DACR0 */ + sdram->dacr0 = + SDRAMC_DARCn_BA(CFG_SDRAM_BASE) | SDRAMC_DARCn_CASL_C1 | + SDRAMC_DARCn_CBM_CMD20 | SDRAMC_DARCn_PS_32; + + /* Initialize DMR0 */ + sdram->dmr0 = ((dramsize - 1) & 0xFFFC0000) | SDRAMC_DMRn_V; + + /* Set IP (bit 3) in DACR */ + sdram->dacr0 |= SDRAMC_DARCn_IP; + + /* Wait 30ns to allow banks to precharge */ + for (i = 0; i < 5; i++) { + asm("nop"); + } + + /* Write to this block to initiate precharge */ + *(u32 *) (CFG_SDRAM_BASE) = 0xA5A59696; + + /* Set RE (bit 15) in DACR */ + sdram->dacr0 |= SDRAMC_DARCn_RE; + + /* Wait for at least 8 auto refresh cycles to occur */ + for (i = 0; i < 0x2000; i++) { + asm("nop"); + } + + /* Finish the configuration by issuing the MRS. */ + sdram->dacr0 |= SDRAMC_DARCn_IMRS; + + /* Write to the SDRAM Mode Register */ + *(u32 *) (CFG_SDRAM_BASE + 0x400) = 0xA5A59696; + } + + return dramsize; +}; + +int testdram(void) +{ + /* TODO: XXX XXX XXX */ + printf("DRAM test not implemented!\n"); + + return (0); +} diff --git a/board/freescale/m5235evb/mii.c b/board/freescale/m5235evb/mii.c new file mode 100644 index 00000000000..58fabdf324c --- /dev/null +++ b/board/freescale/m5235evb/mii.c @@ -0,0 +1,307 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) +#undef MII_DEBUG +#undef ET_DEBUG + +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + if (setclear) { + gpio->par_feci2c |= + (GPIO_PAR_FECI2C_EMDC_FECEMDC | GPIO_PAR_FECI2C_EMDIO_FECEMDIO); + } else { + gpio->par_feci2c &= + ~(GPIO_PAR_FECI2C_EMDC_MASK | GPIO_PAR_FECI2C_EMDIO_MASK); + } + + return 0; +} + +#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_MII) +#include + +/* Make MII read/write commands for the FEC. */ +#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18)) + +#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff)) + +/* PHY identification */ +#define PHY_ID_LXT970 0x78100000 /* LXT970 */ +#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ +#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ +#define PHY_ID_QS6612 0x01814400 /* QS6612 */ +#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ +#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ +#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ +#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */ +#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */ +#define PHY_ID_KS8721BL 0x00221619 /* Micrel KS8721BL/SL */ + +#define STR_ID_LXT970 "LXT970" +#define STR_ID_LXT971 "LXT971" +#define STR_ID_82555 "Intel82555" +#define STR_ID_QS6612 "QS6612" +#define STR_ID_AMD79C784 "AMD79C784" +#define STR_ID_LSI80225 "LSI80225" +#define STR_ID_LSI80225B "LSI80225/B" +#define STR_ID_DP83848VV "N83848" +#define STR_ID_DP83849 "N83849" +#define STR_ID_KS8721BL "KS8721BL" + +/**************************************************************************** + * mii_init -- Initialize the MII for MII command without ethernet + * This function is a subset of eth_init + **************************************************************************** + */ +void mii_reset(struct fec_info_s *info) +{ + volatile fec_t *fecp = (fec_t *) (info->miibase); + int i; + + fecp->ecr = FEC_ECR_RESET; + for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { + udelay(1); + } + if (i == FEC_RESET_DELAY) { + printf("FEC_RESET_DELAY timeout\n"); + } +} + +/* send command to phy using mii, wait for result */ +uint mii_send(uint mii_cmd) +{ + struct fec_info_s *info; + struct eth_device *dev; + volatile fec_t *ep; + uint mii_reply; + int j = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + ep = (fec_t *) info->miibase; + + ep->mmfr = mii_cmd; /* command to phy */ + + /* wait for mii complete */ + while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) { + udelay(1); + j++; + } + if (j >= MCFFEC_TOUT_LOOP) { + printf("MII not complete\n"); + return -1; + } + + mii_reply = ep->mmfr; /* result from phy */ + ep->eir = FEC_EIR_MII; /* clear MII complete */ +#ifdef ET_DEBUG + printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", + __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); +#endif + + return (mii_reply & 0xffff); /* data read from phy */ +} +#endif /* CFG_DISCOVER_PHY || (CONFIG_MII) */ + +#if defined(CFG_DISCOVER_PHY) +int mii_discover_phy(struct eth_device *dev) +{ +#define MAX_PHY_PASSES 11 + struct fec_info_s *info = dev->priv; + int phyaddr, pass; + uint phyno, phytype; + + if (info->phyname_init) + return info->phy_addr; + + phyaddr = -1; /* didn't find a PHY yet */ + for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { + if (pass > 1) { + /* PHY may need more time to recover from reset. + * The LXT970 needs 50ms typical, no maximum is + * specified, so wait 10ms before try again. + * With 11 passes this gives it 100ms to wake up. + */ + udelay(10000); /* wait 10ms */ + } + + for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { + + phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1)); +#ifdef ET_DEBUG + printf("PHY type 0x%x pass %d type\n", phytype, pass); +#endif + if (phytype != 0xffff) { + phyaddr = phyno; + phytype <<= 16; + phytype |= + mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); + + switch (phytype & 0xffffffff) { + case PHY_ID_KS8721BL: + strcpy(info->phy_name, + STR_ID_KS8721BL); + info->phyname_init = 1; + break; + default: + strcpy(info->phy_name, "unknown"); + info->phyname_init = 1; + break; + } + +#ifdef ET_DEBUG + printf("PHY @ 0x%x pass %d type ", phyno, pass); + switch (phytype & 0xffffffff) { + case PHY_ID_KS8721BL: + printf(STR_ID_KS8721BL); + break; + default: + printf("0x%08x\n", phytype); + break; + } +#endif + } + } + } + if (phyaddr < 0) + printf("No PHY device found.\n"); + + return phyaddr; +} +#endif /* CFG_DISCOVER_PHY */ + +int mii_init(void) __attribute__((weak,alias("__mii_init"))); + +void __mii_init(void) +{ + volatile fec_t *fecp; + struct fec_info_s *info; + struct eth_device *dev; + int miispd = 0, i = 0; + u16 autoneg = 0; + + /* retrieve from register structure */ + dev = eth_get_dev(); + info = dev->priv; + + fecp = (fec_t *) info->miibase; + + fecpin_setclear(dev, 1); + + mii_reset(info); + + /* We use strictly polling mode only */ + fecp->eimr = 0; + + /* Clear any pending interrupt */ + fecp->eir = 0xffffffff; + + /* Set MII speed */ + miispd = (gd->bus_clk / 1000000) / 5; + fecp->mscr = miispd << 1; + + info->phy_addr = mii_discover_phy(dev); + +#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS) + while (i < MCFFEC_TOUT_LOOP) { + autoneg = 0; + miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg); + i++; + + if ((autoneg & AUTONEGLINK) == AUTONEGLINK) + break; + + udelay(500); + } + if (i >= MCFFEC_TOUT_LOOP) { + printf("Auto Negotiation not complete\n"); + } + + /* adapt to the half/full speed settings */ + info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16; + info->dup_spd |= miiphy_speed(dev->name, info->phy_addr); +} + +/***************************************************************************** + * Read and write a MII PHY register, routines used by MII Utilities + * + * FIXME: These routines are expected to return 0 on success, but mii_send + * does _not_ return an error code. Maybe 0xFFFF means error, i.e. + * no PHY connected... + * For now always return 0. + * FIXME: These routines only work after calling eth_init() at least once! + * Otherwise they hang in mii_send() !!! Sorry! + *****************************************************************************/ + +int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, + unsigned short *value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr); +#endif + rdreg = mii_send(mk_mii_read(addr, reg)); + + *value = rdreg; + +#ifdef MII_DEBUG + printf("0x%04x\n", *value); +#endif + + return 0; +} + +int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, + unsigned short value) +{ + short rdreg; /* register working value */ + +#ifdef MII_DEBUG + printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); +#endif + + rdreg = mii_send(mk_mii_write(addr, reg, value)); + +#ifdef MII_DEBUG + printf("0x%04x\n", value); +#endif + + return 0; +} + +#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ diff --git a/board/freescale/m5235evb/u-boot.16 b/board/freescale/m5235evb/u-boot.16 new file mode 100644 index 00000000000..8ffd32607a9 --- /dev/null +++ b/board/freescale/m5235evb/u-boot.16 @@ -0,0 +1,145 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mcf523x/start.o (.text) + cpu/mcf523x/cpu_init.o (.text) + lib_m68k/traps.o (.text) + lib_m68k/interrupts.o (.text) + common/dlmalloc.o (.text) + lib_generic/zlib.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + __got_start = .; + *(.got) + __got_end = .; + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + _sbss = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/freescale/m5235evb/u-boot.32 b/board/freescale/m5235evb/u-boot.32 new file mode 100644 index 00000000000..9b72f66c688 --- /dev/null +++ b/board/freescale/m5235evb/u-boot.32 @@ -0,0 +1,153 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mcf523x/start.o (.text) + cpu/mcf523x/cpu.o (.text) + cpu/mcf523x/cpu_init.o (.text) + cpu/mcf523x/interrupts.o (.text) + cpu/mcf523x/speed.o (.text) + lib_m68k/libm68k.a (.text) + common/dlmalloc.o (.text) + common/cmd_bootm.o (.text) + common/cmd_flash.o (.text) + common/cmd_elf.o (.text) + common/cmd_mem.o (.text) + common/console.o (.text) + common/main.o (.text) + lib_generic/libgeneric.a (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + __got_start = .; + *(.got) + __got_end = .; + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + _sbss = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/freescale/m5235evb/u-boot.lds b/board/freescale/m5235evb/u-boot.lds new file mode 100644 index 00000000000..8ffd32607a9 --- /dev/null +++ b/board/freescale/m5235evb/u-boot.lds @@ -0,0 +1,145 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mcf523x/start.o (.text) + cpu/mcf523x/cpu_init.o (.text) + lib_m68k/traps.o (.text) + lib_m68k/interrupts.o (.text) + common/dlmalloc.o (.text) + lib_generic/zlib.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + __got_start = .; + *(.got) + __got_end = .; + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + _sbss = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + _end = . ; + PROVIDE (end = .); +} diff --git a/cpu/mcf523x/Makefile b/cpu/mcf523x/Makefile new file mode 100644 index 00000000000..d0e9b4550f1 --- /dev/null +++ b/cpu/mcf523x/Makefile @@ -0,0 +1,48 @@ +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +# CFLAGS += -DET_DEBUG + +LIB = lib$(CPU).a + +START = start.o +COBJS = cpu.o speed.o cpu_init.o interrupts.o + +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/cpu/mcf523x/config.mk b/cpu/mcf523x/config.mk new file mode 100644 index 00000000000..ba324a894a5 --- /dev/null +++ b/cpu/mcf523x/config.mk @@ -0,0 +1,27 @@ +# +# (C) Copyright 2003 Josef Baumgartner +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +PLATFORM_RELFLAGS += -ffixed-d7 -msep-data +PLATFORM_CPPFLAGS += -m5307 -fPIC diff --git a/cpu/mcf523x/cpu.c b/cpu/mcf523x/cpu.c new file mode 100644 index 00000000000..f0d954b3fbd --- /dev/null +++ b/cpu/mcf523x/cpu.c @@ -0,0 +1,109 @@ +/* + * + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include + +DECLARE_GLOBAL_DATA_PTR; + +int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[]) +{ + volatile ccm_t *ccm = (ccm_t *) MMAP_CCM; + + ccm->rcr = CCM_RCR_SOFTRST; + /* we don't return! */ + return 0; +}; + +int checkcpu(void) +{ + volatile ccm_t *ccm = (ccm_t *) MMAP_CCM; + u16 msk; + u16 id = 0; + u8 ver; + + puts("CPU: "); + msk = (ccm->cir >> 6); + ver = (ccm->cir & 0x003f); + switch (msk) { + case 0x31: + id = 5235; + break; + } + + if (id) { + printf("Freescale MCF%d (Mask:%01x Version:%x)\n", id, msk, + ver); + printf(" CPU CLK %d Mhz BUS CLK %d Mhz\n", + (int)(gd->cpu_clk / 1000000), + (int)(gd->bus_clk / 1000000)); + } + + return 0; +}; + +#if defined(CONFIG_WATCHDOG) +/* Called by macro WATCHDOG_RESET */ +void watchdog_reset(void) +{ + volatile wdog_t *wdp = (wdog_t *) (MMAP_WDOG); + + wdp->sr = 0x5555; /* Count register */ + asm("nop"); + wdp->sr = 0xAAAA; /* Count register */ +} + +int watchdog_disable(void) +{ + volatile wdog_t *wdp = (wdog_t *) (MMAP_WDOG); + + /* UserManual, once the wdog is disabled, wdog cannot be re-enabled */ + wdp->cr |= WTM_WCR_HALTED; /* halted watchdog timer */ + + puts("WATCHDOG:disabled\n"); + return (0); +} + +int watchdog_init(void) +{ + volatile wdog_t *wdp = (wdog_t *) (MMAP_WDOG); + u32 wdog_module = 0; + + /* set timeout and enable watchdog */ + wdog_module = ((CFG_CLK / CFG_HZ) * CONFIG_WATCHDOG_TIMEOUT); + wdog_module |= (wdog_module / 8192); + wdp->mr = wdog_module; + + wdp->cr = WTM_WCR_EN; + puts("WATCHDOG:enabled\n"); + + return (0); +} +#endif /* CONFIG_WATCHDOG */ diff --git a/cpu/mcf523x/cpu_init.c b/cpu/mcf523x/cpu_init.c new file mode 100644 index 00000000000..a31054d9ad3 --- /dev/null +++ b/cpu/mcf523x/cpu_init.c @@ -0,0 +1,145 @@ +/* + * + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#include + +/* + * Breath some life into the CPU... + * + * Set up the memory map, + * initialize a bunch of registers, + * initialize the UPM's + */ +void cpu_init_f(void) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; + volatile wdog_t *wdog = (wdog_t *) MMAP_WDOG; + volatile scm_t *scm = (scm_t *) MMAP_SCM; + + /* watchdog is enabled by default - disable the watchdog */ +#ifndef CONFIG_WATCHDOG + wdog->cr = 0; +#endif + + scm->rambar = (CFG_INIT_RAM_ADDR | SCM_RAMBAR_BDE); + + /* Port configuration */ + gpio->par_cs = 0; + +#if (defined(CFG_CS0_BASE) && defined(CFG_CS0_MASK) && defined(CFG_CS0_CTRL)) + fbcs->csar0 = CFG_CS0_BASE; + fbcs->cscr0 = CFG_CS0_CTRL; + fbcs->csmr0 = CFG_CS0_MASK; +#endif + +#if (defined(CFG_CS1_BASE) && defined(CFG_CS1_MASK) && defined(CFG_CS1_CTRL)) + gpio->par_cs |= GPIO_PAR_CS_CS1; + fbcs->csar1 = CFG_CS1_BASE; + fbcs->cscr1 = CFG_CS1_CTRL; + fbcs->csmr1 = CFG_CS1_MASK; +#endif + +#if (defined(CFG_CS2_BASE) && defined(CFG_CS2_MASK) && defined(CFG_CS2_CTRL)) + gpio->par_cs |= GPIO_PAR_CS_CS2; + fbcs->csar2 = CFG_CS2_BASE; + fbcs->cscr2 = CFG_CS2_CTRL; + fbcs->csmr2 = CFG_CS2_MASK; +#endif + +#if (defined(CFG_CS3_BASE) && defined(CFG_CS3_MASK) && defined(CFG_CS3_CTRL)) + gpio->par_cs |= GPIO_PAR_CS_CS3; + fbcs->csar3 = CFG_CS3_BASE; + fbcs->cscr3 = CFG_CS3_CTRL; + fbcs->csmr3 = CFG_CS3_MASK; +#endif + +#if (defined(CFG_CS4_BASE) && defined(CFG_CS4_MASK) && defined(CFG_CS4_CTRL)) + gpio->par_cs |= GPIO_PAR_CS_CS4; + fbcs->csar4 = CFG_CS4_BASE; + fbcs->cscr4 = CFG_CS4_CTRL; + fbcs->csmr4 = CFG_CS4_MASK; +#endif + +#if (defined(CFG_CS5_BASE) && defined(CFG_CS5_MASK) && defined(CFG_CS5_CTRL)) + gpio->par_cs |= GPIO_PAR_CS_CS5; + fbcs->csar5 = CFG_CS5_BASE; + fbcs->cscr5 = CFG_CS5_CTRL; + fbcs->csmr5 = CFG_CS5_MASK; +#endif + +#if (defined(CFG_CS6_BASE) && defined(CFG_CS6_MASK) && defined(CFG_CS6_CTRL)) + gpio->par_cs |= GPIO_PAR_CS_CS6; + fbcs->csar6 = CFG_CS6_BASE; + fbcs->cscr6 = CFG_CS6_CTRL; + fbcs->csmr6 = CFG_CS6_MASK; +#endif + +#if (defined(CFG_CS7_BASE) && defined(CFG_CS7_MASK) && defined(CFG_CS7_CTRL)) + gpio->par_cs |= GPIO_PAR_CS_CS7; + fbcs->csar7 = CFG_CS7_BASE; + fbcs->cscr7 = CFG_CS7_CTRL; + fbcs->csmr7 = CFG_CS7_MASK; +#endif + +#ifdef CONFIG_FSL_I2C + gpio->par_feci2c &= ~(GPIO_PAR_FECI2C_SCL_MASK | GPIO_PAR_FECI2C_SDA_MASK); + gpio->par_feci2c |= (GPIO_PAR_FECI2C_SCL_I2CSCL | GPIO_PAR_FECI2C_SDA_I2CSDA); +#endif + + icache_enable(); +} + +/* + * initialize higher level parts of CPU like timers + */ +int cpu_init_r(void) +{ + return (0); +} + +void uart_port_conf(void) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + /* Setup Ports: */ + switch (CFG_UART_PORT) { + case 0: + gpio->par_uart = (GPIO_PAR_UART_U0RXD | GPIO_PAR_UART_U0TXD); + break; + case 1: + gpio->par_uart = + (GPIO_PAR_UART_U1RXD_U1RXD | GPIO_PAR_UART_U1TXD_U1TXD); + break; + case 2: + gpio->par_timer = (GPIO_PAR_UART_U2RXD | GPIO_PAR_UART_U2TXD); + break; + } +} diff --git a/cpu/mcf523x/interrupts.c b/cpu/mcf523x/interrupts.c new file mode 100644 index 00000000000..125c53b1bcd --- /dev/null +++ b/cpu/mcf523x/interrupts.c @@ -0,0 +1,49 @@ +/* + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* CPU specific interrupt routine */ +#include +#include + +int interrupt_init(void) +{ + volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE); + + /* Make sure all interrupts are disabled */ + intp->imrl0 |= 0x1; + + enable_interrupts(); + return 0; +} + +#if defined(CONFIG_MCFTMR) +void dtimer_intr_setup(void) +{ + volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE); + + intp->icr0[CFG_TMRINTR_NO] = CFG_TMRINTR_PRI; + intp->imrl0 &= ~INTC_IPRL_INT0; + intp->imrl0 &= ~CFG_TMRINTR_MASK; +} +#endif diff --git a/cpu/mcf523x/speed.c b/cpu/mcf523x/speed.c new file mode 100644 index 00000000000..509109d0ed0 --- /dev/null +++ b/cpu/mcf523x/speed.c @@ -0,0 +1,48 @@ +/* + * + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#include + +DECLARE_GLOBAL_DATA_PTR; +/* + * get_clocks() fills in gd->cpu_clock and gd->bus_clk + */ +int get_clocks(void) +{ + volatile pll_t *pll = (volatile pll_t *)(MMAP_PLL); + + pll->syncr = PLL_SYNCR_MFD(1); + + while (!(pll->synsr & PLL_SYNSR_LOCK)); + + gd->bus_clk = CFG_CLK; + gd->cpu_clk = (gd->bus_clk * 2); + return (0); +} diff --git a/cpu/mcf523x/start.S b/cpu/mcf523x/start.S new file mode 100644 index 00000000000..2bd603db669 --- /dev/null +++ b/cpu/mcf523x/start.S @@ -0,0 +1,340 @@ +/* + * Copyright (C) 2003 Josef Baumgartner + * Based on code from Bernhard Kuhn + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include "version.h" + +#ifndef CONFIG_IDENT_STRING +#define CONFIG_IDENT_STRING "" +#endif + +#define _START _start +#define _FAULT _fault + +#define SAVE_ALL \ + move.w #0x2700,%sr; /* disable intrs */ \ + subl #60,%sp; /* space for 15 regs */ \ + moveml %d0-%d7/%a0-%a6,%sp@; + +#define RESTORE_ALL \ + moveml %sp@,%d0-%d7/%a0-%a6; \ + addl #60,%sp; /* space for 15 regs */ \ + rte; + +.text +/* + * Vector table. This is used for initial platform startup. + * These vectors are to catch any un-intended traps. + */ +_vectors: + +INITSP: .long 0x00000000 /* Initial SP */ +INITPC: .long _START /* Initial PC */ +vector02: .long _FAULT /* Access Error */ +vector03: .long _FAULT /* Address Error */ +vector04: .long _FAULT /* Illegal Instruction */ +vector05: .long _FAULT /* Reserved */ +vector06: .long _FAULT /* Reserved */ +vector07: .long _FAULT /* Reserved */ +vector08: .long _FAULT /* Privilege Violation */ +vector09: .long _FAULT /* Trace */ +vector0A: .long _FAULT /* Unimplemented A-Line */ +vector0B: .long _FAULT /* Unimplemented F-Line */ +vector0C: .long _FAULT /* Debug Interrupt */ +vector0D: .long _FAULT /* Reserved */ +vector0E: .long _FAULT /* Format Error */ +vector0F: .long _FAULT /* Unitialized Int. */ + +/* Reserved */ +vector10_17: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +vector18: .long _FAULT /* Spurious Interrupt */ +vector19: .long _FAULT /* Autovector Level 1 */ +vector1A: .long _FAULT /* Autovector Level 2 */ +vector1B: .long _FAULT /* Autovector Level 3 */ +vector1C: .long _FAULT /* Autovector Level 4 */ +vector1D: .long _FAULT /* Autovector Level 5 */ +vector1E: .long _FAULT /* Autovector Level 6 */ +vector1F: .long _FAULT /* Autovector Level 7 */ + +/* TRAP #0 - #15 */ +vector20_2F: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +/* Reserved */ +vector30_3F: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +vector64_127: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +vector128_191: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +vector192_255: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + + .text + + .globl _start +_start: + nop + nop + move.w #0x2700,%sr /* Mask off Interrupt */ + + /* Set vector base register at the beginning of the Flash */ + move.l #CFG_FLASH_BASE, %d0 + movec %d0, %VBR + + move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_RAM_CTRL), %d0 + movec %d0, %RAMBAR1 + + /* invalidate and disable cache */ + move.l #0x01000000, %d0 /* Invalidate cache cmd */ + movec %d0, %CACR /* Invalidate cache */ + nop + move.l #0, %d0 + movec %d0, %ACR0 + movec %d0, %ACR1 + + /* initialize general use internal ram */ + move.l #0, %d0 + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1 + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a2 + move.l %d0, (%a1) + move.l %d0, (%a2) + + /* set stackpointer to end of internal ram to get some stackspace for the + first c-code */ + move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET), %sp + clr.l %sp@- + + move.l #__got_start, %a5 /* put relocation table address to a5 */ + + bsr cpu_init_f /* run low-level CPU init code (from flash) */ + bsr board_init_f /* run low-level board init code (from flash) */ + + /* board_init_f() does not return */ + +/*------------------------------------------------------------------------------*/ + +/* + * void relocate_code (addr_sp, gd, addr_moni) + * + * This "function" does not return, instead it continues in RAM + * after relocating the monitor code. + * + * r3 = dest + * r4 = src + * r5 = length in bytes + * r6 = cachelinesize + */ + .globl relocate_code +relocate_code: + link.w %a6,#0 + move.l 8(%a6), %sp /* set new stack pointer */ + + move.l 12(%a6), %d0 /* Save copy of Global Data pointer */ + move.l 16(%a6), %a0 /* Save copy of Destination Address */ + + move.l #CFG_MONITOR_BASE, %a1 + move.l #__init_end, %a2 + move.l %a0, %a3 + + /* copy the code to RAM */ +1: + move.l (%a1)+, (%a3)+ + cmp.l %a1,%a2 + bgt.s 1b + +/* + * We are done. Do not return, instead branch to second part of board + * initialization, now running from RAM. + */ + move.l %a0, %a1 + add.l #(in_ram - CFG_MONITOR_BASE), %a1 + jmp (%a1) + +in_ram: + +clear_bss: + /* + * Now clear BSS segment + */ + move.l %a0, %a1 + add.l #(_sbss - CFG_MONITOR_BASE),%a1 + move.l %a0, %d1 + add.l #(_ebss - CFG_MONITOR_BASE),%d1 +6: + clr.l (%a1)+ + cmp.l %a1,%d1 + bgt.s 6b + + /* + * fix got table in RAM + */ + move.l %a0, %a1 + add.l #(__got_start - CFG_MONITOR_BASE),%a1 + move.l %a1,%a5 /* * fix got pointer register a5 */ + + move.l %a0, %a2 + add.l #(__got_end - CFG_MONITOR_BASE),%a2 + +7: + move.l (%a1),%d1 + sub.l #_start,%d1 + add.l %a0,%d1 + move.l %d1,(%a1)+ + cmp.l %a2, %a1 + bne 7b + + /* calculate relative jump to board_init_r in ram */ + move.l %a0, %a1 + add.l #(board_init_r - CFG_MONITOR_BASE), %a1 + + /* set parameters for board_init_r */ + move.l %a0,-(%sp) /* dest_addr */ + move.l %d0,-(%sp) /* gd */ + jsr (%a1) + +/*------------------------------------------------------------------------------*/ +/* exception code */ + .globl _fault +_fault: + jmp _fault + .globl _exc_handler + +_exc_handler: + SAVE_ALL + movel %sp,%sp@- + bsr exc_handler + addql #4,%sp + RESTORE_ALL + + .globl _int_handler +_int_handler: + SAVE_ALL + movel %sp,%sp@- + bsr int_handler + addql #4,%sp + RESTORE_ALL + +/*------------------------------------------------------------------------------*/ +/* cache functions */ + .globl icache_enable +icache_enable: + move.l #0x01000000, %d0 /* Invalidate cache cmd */ + movec %d0, %CACR /* Invalidate cache */ + nop + move.l #(CFG_SDRAM_BASE + 0xc000), %d0 /* Setup cache mask */ + movec %d0, %ACR0 /* Enable cache */ + move.l #(CFG_FLASH_BASE + 0xc000), %d0 /* Setup cache mask */ + movec %d0, %ACR1 /* Enable cache */ + + move.l #0x80400100, %d0 /* Setup cache mask */ + movec %d0, %CACR /* Enable cache */ + nop + + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1 + moveq #1, %d0 + move.l %d0, (%a1) + rts + + .globl icache_disable +icache_disable: + move.l #0x00000100, %d0 /* Setup cache mask */ + movec %d0, %CACR /* Disable cache */ + clr.l %d0 /* Setup cache mask */ + movec %d0, %ACR0 + movec %d0, %ACR1 + + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1 + moveq #0, %d0 + move.l %d0, (%a1) + rts + + .globl icache_status +icache_status: + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1 + move.l (%a1), %d0 + rts + + .globl icache_invalid +icache_invalid: + move.l #0x80600100, %d0 /* Setup cache mask */ + movec %d0, %CACR /* Enable cache */ + nop + rts + + .globl dcache_enable +dcache_enable: + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a1 + moveq #1, %d0 + move.l %d0, (%a1) + rts + + /* No dcache, just a dummy function */ + .globl dcache_disable +dcache_disable: + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a1 + moveq #0, %d0 + move.l %d0, (%a1) + rts + + .globl dcache_status +dcache_status: + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a1 + move.l (%a1), %d0 + rts + +/*------------------------------------------------------------------------------*/ + + .globl version_string +version_string: + .ascii U_BOOT_VERSION + .ascii " (", __DATE__, " - ", __TIME__, ")" + .ascii CONFIG_IDENT_STRING, "\0" diff --git a/include/asm-m68k/immap.h b/include/asm-m68k/immap.h index d66c1619b16..ffb9a377ba5 100644 --- a/include/asm-m68k/immap.h +++ b/include/asm-m68k/immap.h @@ -26,6 +26,35 @@ #ifndef __IMMAP_H #define __IMMAP_H +#ifdef CONFIG_M5235 +#include +#include + +#define CFG_FEC0_IOBASE (MMAP_FEC) +#define CFG_UART_BASE (MMAP_UART0 + (CFG_UART_PORT * 0x40)) + +/* Timer */ +#ifdef CONFIG_MCFTMR +#define CFG_UDELAY_BASE (MMAP_DTMR0) +#define CFG_TMR_BASE (MMAP_DTMR3) +#define CFG_TMRPND_REG (((volatile int0_t *)(CFG_INTR_BASE))->iprl0) +#define CFG_TMRINTR_NO (INT0_LO_DTMR3) +#define CFG_TMRINTR_MASK (INTC_IPRL_INT22) +#define CFG_TMRINTR_PEND (CFG_TMRINTR_MASK) +#define CFG_TMRINTR_PRI (0x1E) /* Level must include inorder to work */ +#define CFG_TIMER_PRESCALER (((gd->bus_clk / 1000000) - 1) << 8) +#endif + +#ifdef CONFIG_MCFPIT +#define CFG_UDELAY_BASE (MMAP_PIT0) +#define CFG_PIT_BASE (MMAP_PIT1) +#define CFG_PIT_PRESCALE (6) +#endif + +#define CFG_INTR_BASE (MMAP_INTC0) +#define CFG_NUM_IRQS (128) +#endif /* CONFIG_M5235 */ + #ifdef CONFIG_M5249 #include #include diff --git a/include/asm-m68k/immap_5235.h b/include/asm-m68k/immap_5235.h new file mode 100644 index 00000000000..4a034501d3b --- /dev/null +++ b/include/asm-m68k/immap_5235.h @@ -0,0 +1,378 @@ +/* + * MCF5329 Internal Memory Map + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __IMMAP_5235__ +#define __IMMAP_5235__ + +#define MMAP_SCM (CFG_MBAR + 0x00000000) +#define MMAP_SDRAM (CFG_MBAR + 0x00000040) +#define MMAP_FBCS (CFG_MBAR + 0x00000080) +#define MMAP_DMA0 (CFG_MBAR + 0x00000100) +#define MMAP_DMA1 (CFG_MBAR + 0x00000110) +#define MMAP_DMA2 (CFG_MBAR + 0x00000120) +#define MMAP_DMA3 (CFG_MBAR + 0x00000130) +#define MMAP_UART0 (CFG_MBAR + 0x00000200) +#define MMAP_UART1 (CFG_MBAR + 0x00000240) +#define MMAP_UART2 (CFG_MBAR + 0x00000280) +#define MMAP_I2C (CFG_MBAR + 0x00000300) +#define MMAP_QSPI (CFG_MBAR + 0x00000340) +#define MMAP_DTMR0 (CFG_MBAR + 0x00000400) +#define MMAP_DTMR1 (CFG_MBAR + 0x00000440) +#define MMAP_DTMR2 (CFG_MBAR + 0x00000480) +#define MMAP_DTMR3 (CFG_MBAR + 0x000004C0) +#define MMAP_INTC0 (CFG_MBAR + 0x00000C00) +#define MMAP_INTC1 (CFG_MBAR + 0x00000D00) +#define MMAP_INTCACK (CFG_MBAR + 0x00000F00) +#define MMAP_FEC (CFG_MBAR + 0x00001000) +#define MMAP_FECFIFO (CFG_MBAR + 0x00001400) +#define MMAP_GPIO (CFG_MBAR + 0x00100000) +#define MMAP_CCM (CFG_MBAR + 0x00110000) +#define MMAP_PLL (CFG_MBAR + 0x00120000) +#define MMAP_EPORT (CFG_MBAR + 0x00130000) +#define MMAP_WDOG (CFG_MBAR + 0x00140000) +#define MMAP_PIT0 (CFG_MBAR + 0x00150000) +#define MMAP_PIT1 (CFG_MBAR + 0x00160000) +#define MMAP_PIT2 (CFG_MBAR + 0x00170000) +#define MMAP_PIT3 (CFG_MBAR + 0x00180000) +#define MMAP_MDHA (CFG_MBAR + 0x00190000) +#define MMAP_RNG (CFG_MBAR + 0x001A0000) +#define MMAP_SKHA (CFG_MBAR + 0x001B0000) +#define MMAP_CAN1 (CFG_MBAR + 0x001C0000) +#define MMAP_ETPU (CFG_MBAR + 0x001D0000) +#define MMAP_CAN2 (CFG_MBAR + 0x001F0000) + +/* System Control Module register */ +typedef struct scm_ctrl { + u32 ipsbar; /* 0x00 - MBAR */ + u32 res1; /* 0x04 */ + u32 rambar; /* 0x08 - RAMBAR */ + u32 res2; /* 0x0C */ + u8 crsr; /* 0x10 Core Reset Status Register */ + u8 cwcr; /* 0x11 Core Watchdog Control Register */ + u8 lpicr; /* 0x12 Low-Power Interrupt Control Register */ + u8 cwsr; /* 0x13 Core Watchdog Service Register */ + u32 dmareqc; /* 0x14 */ + u32 res3; /* 0x18 */ + u32 mpark; /* 0x1C */ + u8 mpr; /* 0x20 */ + u8 res4[3]; /* 0x21 - 0x23 */ + u8 pacr0; /* 0x24 */ + u8 pacr1; /* 0x25 */ + u8 pacr2; /* 0x26 */ + u8 pacr3; /* 0x27 */ + u8 pacr4; /* 0x28 */ + u32 res5; /* 0x29 */ + u8 pacr5; /* 0x2a */ + u8 pacr6; /* 0x2b */ + u8 pacr7; /* 0x2c */ + u32 res6; /* 0x2d */ + u8 pacr8; /* 0x2e */ + u32 res7; /* 0x2f */ + u8 gpacr; /* 0x30 */ + u8 res8[3]; /* 0x31 - 0x33 */ +} scm_t; + +/* SDRAM controller registers */ +typedef struct sdram_ctrl { + u16 dcr; /* 0x00 Control register */ + u16 res1[3]; /* 0x02 - 0x07 */ + u32 dacr0; /* 0x08 address and control register 0 */ + u32 dmr0; /* 0x0C mask register block 0 */ + u32 dacr1; /* 0x10 address and control register 1 */ + u32 dmr1; /* 0x14 mask register block 1 */ +} sdram_t; + +/* Flexbus module Chip select registers */ +typedef struct fbcs_ctrl { + u16 csar0; /* 0x00 Chip-Select Address Register 0 */ + u16 res0; + u32 csmr0; /* 0x04 Chip-Select Mask Register 0 */ + u16 res1; /* 0x08 */ + u16 cscr0; /* 0x0A Chip-Select Control Register 0 */ + + u16 csar1; /* 0x0C Chip-Select Address Register 1 */ + u16 res2; + u32 csmr1; /* 0x10 Chip-Select Mask Register 1 */ + u16 res3; /* 0x14 */ + u16 cscr1; /* 0x16 Chip-Select Control Register 1 */ + + u16 csar2; /* 0x18 Chip-Select Address Register 2 */ + u16 res4; + u32 csmr2; /* 0x1C Chip-Select Mask Register 2 */ + u16 res5; /* 0x20 */ + u16 cscr2; /* 0x22 Chip-Select Control Register 2 */ + + u16 csar3; /* 0x24 Chip-Select Address Register 3 */ + u16 res6; + u32 csmr3; /* 0x28 Chip-Select Mask Register 3 */ + u16 res7; /* 0x2C */ + u16 cscr3; /* 0x2E Chip-Select Control Register 3 */ + + u16 csar4; /* 0x30 Chip-Select Address Register 4 */ + u16 res8; + u32 csmr4; /* 0x34 Chip-Select Mask Register 4 */ + u16 res9; /* 0x38 */ + u16 cscr4; /* 0x3A Chip-Select Control Register 4 */ + + u16 csar5; /* 0x3C Chip-Select Address Register 5 */ + u16 res10; + u32 csmr5; /* 0x40 Chip-Select Mask Register 5 */ + u16 res11; /* 0x44 */ + u16 cscr5; /* 0x46 Chip-Select Control Register 5 */ + + u16 csar6; /* 0x48 Chip-Select Address Register 5 */ + u16 res12; + u32 csmr6; /* 0x4C Chip-Select Mask Register 5 */ + u16 res13; /* 0x50 */ + u16 cscr6; /* 0x52 Chip-Select Control Register 5 */ + + u16 csar7; /* 0x54 Chip-Select Address Register 5 */ + u16 res14; + u32 csmr7; /* 0x58 Chip-Select Mask Register 5 */ + u16 res15; /* 0x5C */ + u16 cscr7; /* 0x5E Chip-Select Control Register 5 */ +} fbcs_t; + +/* QSPI module registers */ +typedef struct qspi_ctrl { + u16 qmr; /* Mode register */ + u16 res1; + u16 qdlyr; /* Delay register */ + u16 res2; + u16 qwr; /* Wrap register */ + u16 res3; + u16 qir; /* Interrupt register */ + u16 res4; + u16 qar; /* Address register */ + u16 res5; + u16 qdr; /* Data register */ + u16 res6; +} qspi_t; + +/* Interrupt module registers */ +typedef struct int0_ctrl { + /* Interrupt Controller 0 */ + u32 iprh0; /* 0x00 Pending Register High */ + u32 iprl0; /* 0x04 Pending Register Low */ + u32 imrh0; /* 0x08 Mask Register High */ + u32 imrl0; /* 0x0C Mask Register Low */ + u32 frch0; /* 0x10 Force Register High */ + u32 frcl0; /* 0x14 Force Register Low */ + u8 irlr; /* 0x18 */ + u8 iacklpr; /* 0x19 */ + u16 res1[19]; /* 0x1a - 0x3c */ + u8 icr0[64]; /* 0x40 - 0x7F Control registers */ + u32 res3[24]; /* 0x80 - 0xDF */ + u8 swiack0; /* 0xE0 Software Interrupt Acknowledge */ + u8 res4[3]; /* 0xE1 - 0xE3 */ + u8 Lniack0_1; /* 0xE4 Level n interrupt acknowledge resister */ + u8 res5[3]; /* 0xE5 - 0xE7 */ + u8 Lniack0_2; /* 0xE8 Level n interrupt acknowledge resister */ + u8 res6[3]; /* 0xE9 - 0xEB */ + u8 Lniack0_3; /* 0xEC Level n interrupt acknowledge resister */ + u8 res7[3]; /* 0xED - 0xEF */ + u8 Lniack0_4; /* 0xF0 Level n interrupt acknowledge resister */ + u8 res8[3]; /* 0xF1 - 0xF3 */ + u8 Lniack0_5; /* 0xF4 Level n interrupt acknowledge resister */ + u8 res9[3]; /* 0xF5 - 0xF7 */ + u8 Lniack0_6; /* 0xF8 Level n interrupt acknowledge resister */ + u8 resa[3]; /* 0xF9 - 0xFB */ + u8 Lniack0_7; /* 0xFC Level n interrupt acknowledge resister */ + u8 resb[3]; /* 0xFD - 0xFF */ +} int0_t; + +typedef struct int1_ctrl { + /* Interrupt Controller 1 */ + u32 iprh1; /* 0x00 Pending Register High */ + u32 iprl1; /* 0x04 Pending Register Low */ + u32 imrh1; /* 0x08 Mask Register High */ + u32 imrl1; /* 0x0C Mask Register Low */ + u32 frch1; /* 0x10 Force Register High */ + u32 frcl1; /* 0x14 Force Register Low */ + u8 irlr; /* 0x18 */ + u8 iacklpr; /* 0x19 */ + u16 res1[19]; /* 0x1a - 0x3c */ + u8 icr1[64]; /* 0x40 - 0x7F */ + u32 res4[24]; /* 0x80 - 0xDF */ + u8 swiack1; /* 0xE0 Software Interrupt Acknowledge */ + u8 res5[3]; /* 0xE1 - 0xE3 */ + u8 Lniack1_1; /* 0xE4 Level n interrupt acknowledge resister */ + u8 res6[3]; /* 0xE5 - 0xE7 */ + u8 Lniack1_2; /* 0xE8 Level n interrupt acknowledge resister */ + u8 res7[3]; /* 0xE9 - 0xEB */ + u8 Lniack1_3; /* 0xEC Level n interrupt acknowledge resister */ + u8 res8[3]; /* 0xED - 0xEF */ + u8 Lniack1_4; /* 0xF0 Level n interrupt acknowledge resister */ + u8 res9[3]; /* 0xF1 - 0xF3 */ + u8 Lniack1_5; /* 0xF4 Level n interrupt acknowledge resister */ + u8 resa[3]; /* 0xF5 - 0xF7 */ + u8 Lniack1_6; /* 0xF8 Level n interrupt acknowledge resister */ + u8 resb[3]; /* 0xF9 - 0xFB */ + u8 Lniack1_7; /* 0xFC Level n interrupt acknowledge resister */ + u8 resc[3]; /* 0xFD - 0xFF */ +} int1_t; + +typedef struct intgack_ctrl1 { + /* Global IACK Registers */ + u8 swiack; /* 0xE0 Global Software Interrupt Acknowledge */ + u8 Lniack[7]; /* 0xE1 - 0xE7 Global Level 0 Interrupt Acknowledge */ +} intgack_t; + +/* GPIO port registers */ +typedef struct gpio_ctrl { + /* Port Output Data Registers */ + u8 podr_addr; /* 0x00 */ + u8 podr_datah; /* 0x01 */ + u8 podr_datal; /* 0x02 */ + u8 podr_busctl; /* 0x03 */ + u8 podr_bs; /* 0x04 */ + u8 podr_cs; /* 0x05 */ + u8 podr_sdram; /* 0x06 */ + u8 podr_feci2c; /* 0x07 */ + u8 podr_uarth; /* 0x08 */ + u8 podr_uartl; /* 0x09 */ + u8 podr_qspi; /* 0x0A */ + u8 podr_timer; /* 0x0B */ + u8 podr_etpu; /* 0x0C */ + u8 res1[3]; /* 0x0D - 0x0F */ + + /* Port Data Direction Registers */ + u8 pddr_addr; /* 0x10 */ + u8 pddr_datah; /* 0x11 */ + u8 pddr_datal; /* 0x12 */ + u8 pddr_busctl; /* 0x13 */ + u8 pddr_bs; /* 0x14 */ + u8 pddr_cs; /* 0x15 */ + u8 pddr_sdram; /* 0x16 */ + u8 pddr_feci2c; /* 0x17 */ + u8 pddr_uarth; /* 0x18 */ + u8 pddr_uartl; /* 0x19 */ + u8 pddr_qspi; /* 0x1A */ + u8 pddr_timer; /* 0x1B */ + u8 pddr_etpu; /* 0x1C */ + u8 res2[3]; /* 0x1D - 0x1F */ + + /* Port Data Direction Registers */ + u8 ppdsdr_addr; /* 0x20 */ + u8 ppdsdr_datah; /* 0x21 */ + u8 ppdsdr_datal; /* 0x22 */ + u8 ppdsdr_busctl; /* 0x23 */ + u8 ppdsdr_bs; /* 0x24 */ + u8 ppdsdr_cs; /* 0x25 */ + u8 ppdsdr_sdram; /* 0x26 */ + u8 ppdsdr_feci2c; /* 0x27 */ + u8 ppdsdr_uarth; /* 0x28 */ + u8 ppdsdr_uartl; /* 0x29 */ + u8 ppdsdr_qspi; /* 0x2A */ + u8 ppdsdr_timer; /* 0x2B */ + u8 ppdsdr_etpu; /* 0x2C */ + u8 res3[3]; /* 0x2D - 0x2F */ + + /* Port Clear Output Data Registers */ + u8 pclrr_addr; /* 0x30 */ + u8 pclrr_datah; /* 0x31 */ + u8 pclrr_datal; /* 0x32 */ + u8 pclrr_busctl; /* 0x33 */ + u8 pclrr_bs; /* 0x34 */ + u8 pclrr_cs; /* 0x35 */ + u8 pclrr_sdram; /* 0x36 */ + u8 pclrr_feci2c; /* 0x37 */ + u8 pclrr_uarth; /* 0x38 */ + u8 pclrr_uartl; /* 0x39 */ + u8 pclrr_qspi; /* 0x3A */ + u8 pclrr_timer; /* 0x3B */ + u8 pclrr_etpu; /* 0x3C */ + u8 res4[3]; /* 0x3D - 0x3F */ + + /* Pin Assignment Registers */ + u8 par_ad; /* 0x40 */ + u8 res5; /* 0x41 */ + u16 par_busctl; /* 0x42 */ + u8 par_bs; /* 0x44 */ + u8 par_cs; /* 0x45 */ + u8 par_sdram; /* 0x46 */ + u8 par_feci2c; /* 0x47 */ + u16 par_uart; /* 0x48 */ + u8 par_qspi; /* 0x4A */ + u8 res6; /* 0x4B */ + u16 par_timer; /* 0x4C */ + u8 par_etpu; /* 0x4E */ + u8 res7; /* 0x4F */ + + /* Drive Strength Control Registers */ + u8 dscr_eim; /* 0x50 */ + u8 dscr_etpu; /* 0x51 */ + u8 dscr_feci2c; /* 0x52 */ + u8 dscr_uart; /* 0x53 */ + u8 dscr_qspi; /* 0x54 */ + u8 dscr_timer; /* 0x55 */ + u16 res8; /* 0x56 */ +} gpio_t; + +/*Chip configuration module registers */ +typedef struct ccm_ctrl { + u8 rcr; /* 0x01 */ + u8 rsr; /* 0x02 */ + u16 res1; /* 0x03 */ + u16 ccr; /* 0x04 Chip configuration register */ + u16 lpcr; /* 0x06 Low-power Control register */ + u16 rcon; /* 0x08 Rreset configuration register */ + u16 cir; /* 0x0a Chip identification register */ +} ccm_t; + +/* Clock Module registers */ +typedef struct pll_ctrl { + u32 syncr; /* 0x00 synthesizer control register */ + u32 synsr; /* 0x04 synthesizer status register */ +} pll_t; + +/* Watchdog registers */ +typedef struct wdog_ctrl { + u16 cr; /* 0x00 Control register */ + u16 mr; /* 0x02 Modulus register */ + u16 cntr; /* 0x04 Count register */ + u16 sr; /* 0x06 Service register */ +} wdog_t; + +/* FlexCan module registers */ +typedef struct can_ctrl { + u32 mcr; /* 0x00 Module Configuration register */ + u32 ctrl; /* 0x04 Control register */ + u32 timer; /* 0x08 Free Running Timer */ + u32 res1; /* 0x0C */ + u32 rxgmask; /* 0x10 Rx Global Mask */ + u32 rx14mask; /* 0x14 RxBuffer 14 Mask */ + u32 rx15mask; /* 0x18 RxBuffer 15 Mask */ + u32 errcnt; /* 0x1C Error Counter Register */ + u32 errstat; /* 0x20 Error and status Register */ + u32 res2; /* 0x24 */ + u32 imask; /* 0x28 Interrupt Mask Register */ + u32 res3; /* 0x2C */ + u32 iflag; /* 0x30 Interrupt Flag Register */ + u32 res4[19]; /* 0x34 - 0x7F */ + u32 MB0_15[2048]; /* 0x80 Message Buffer 0-15 */ +} can_t; + +#endif /* __IMMAP_5235__ */ diff --git a/include/asm-m68k/m5235.h b/include/asm-m68k/m5235.h new file mode 100644 index 00000000000..b98b452ca96 --- /dev/null +++ b/include/asm-m68k/m5235.h @@ -0,0 +1,905 @@ +/* + * mcf5329.h -- Definitions for Freescale Coldfire 5329 + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef mcf5235_h +#define mcf5235_h +/****************************************************************************/ + +/********************************************************************* +* System Control Module (SCM) +*********************************************************************/ + +/* Bit definition and macros for SCM_IPSBAR */ +#define SCM_IPSBAR_BA(x) (((x)&0x03)<<30) +#define SCM_IPSBAR_V (0x00000001) + +/* Bit definition and macros for SCM_RAMBAR */ +#define SCM_RAMBAR_BA(x) (((x)&0xFFFF)<<16) +#define SCM_RAMBAR_BDE (0x00000200) + +/* Bit definition and macros for SCM_CRSR */ +#define SCM_CRSR_EXT (0x80) + +/* Bit definitions and macros for SCM_CWCR */ +#define SCM_CWCR_CWE (0x80) +#define SCM_CWCR_CWRI (0x40) +#define SCM_CWCR_CWT(x) (((x)&0x07)<<3) +#define SCM_CWCR_CWTA (0x04) +#define SCM_CWCR_CWTAVAL (0x02) +#define SCM_CWCR_CWTIC (0x01) + +/* Bit definitions and macros for SCM_LPICR */ +#define SCM_LPICR_ENBSTOP (0x80) +#define SCM_LPICR_XLPM_IPL(x) (((x)&0x07)<<4) +#define SCM_LPICR_XLPM_IPL_ANY (0x00) +#define SCM_LPICR_XLPM_IPL_L2_7 (0x10) +#define SCM_LPICR_XLPM_IPL_L3_7 (0x20) +#define SCM_LPICR_XLPM_IPL_L4_7 (0x30) +#define SCM_LPICR_XLPM_IPL_L5_7 (0x40) +#define SCM_LPICR_XLPM_IPL_L6_7 (0x50) +#define SCM_LPICR_XLPM_IPL_L7 (0x70) + +/* Bit definitions and macros for SCM_DMAREQC */ +#define SCM_DMAREQC_EXT(x) (((x)&0x0F)<<16) +#define SCM_DMAREQC_EXT_ETPU (0x00080000) +#define SCM_DMAREQC_EXT_EXTDREQ2 (0x00040000) +#define SCM_DMAREQC_EXT_EXTDREQ1 (0x00020000) +#define SCM_DMAREQC_EXT_EXTDREQ0 (0x00010000) +#define SCM_DMAREQC_DMAC3(x) (((x)&0x0F)<<12) +#define SCM_DMAREQC_DMAC2(x) (((x)&0x0F)<<8) +#define SCM_DMAREQC_DMAC1(x) (((x)&0x0F)<<4) +#define SCM_DMAREQC_DMAC0(x) (((x)&0x0F)) +#define SCM_DMAREQC_DMACn_DTMR0 (0x04) +#define SCM_DMAREQC_DMACn_DTMR1 (0x05) +#define SCM_DMAREQC_DMACn_DTMR2 (0x06) +#define SCM_DMAREQC_DMACn_DTMR3 (0x07) +#define SCM_DMAREQC_DMACn_UART0RX (0x08) +#define SCM_DMAREQC_DMACn_UART1RX (0x09) +#define SCM_DMAREQC_DMACn_UART2RX (0x0A) +#define SCM_DMAREQC_DMACn_UART0TX (0x0C) +#define SCM_DMAREQC_DMACn_UART1TX (0x0D) +#define SCM_DMAREQC_DMACn_UART3TX (0x0E) + +/* Bit definitions and macros for SCM_MPARK */ +#define SCM_MPARK_M2_P_EN (0x02000000) +#define SCM_MPARK_M3_PRTY_MSK (0x00C00000) +#define SCM_MPARK_M3_PRTY_4TH (0x00000000) +#define SCM_MPARK_M3_PRTY_3RD (0x00400000) +#define SCM_MPARK_M3_PRTY_2ND (0x00800000) +#define SCM_MPARK_M3_PRTY_1ST (0x00C00000) +#define SCM_MPARK_M2_PRTY_MSK (0x00300000) +#define SCM_MPARK_M2_PRTY_4TH (0x00000000) +#define SCM_MPARK_M2_PRTY_3RD (0x00100000) +#define SCM_MPARK_M2_PRTY_2ND (0x00200000) +#define SCM_MPARK_M2_PRTY_1ST (0x00300000) +#define SCM_MPARK_M0_PRTY_MSK (0x000C0000) +#define SCM_MPARK_M0_PRTY_4TH (0x00000000) +#define SCM_MPARK_M0_PRTY_3RD (0x00040000) +#define SCM_MPARK_M0_PRTY_2ND (0x00080000) +#define SCM_MPARK_M0_PRTY_1ST (0x000C0000) +#define SCM_MPARK_FIXED (0x00004000) +#define SCM_MPARK_TIMEOUT (0x00002000) +#define SCM_MPARK_PRKLAST (0x00001000) +#define SCM_MPARK_LCKOUT_TIME(x) (((x)&0x0F)<<8) + +/* Bit definitions and macros for SCM_MPR */ +#define SCM_MPR_MPR3 (0x08) +#define SCM_MPR_MPR2 (0x04) +#define SCM_MPR_MPR1 (0x02) +#define SCM_MPR_MPR0 (0x01) + +/* Bit definitions and macros for SCM_PACRn */ +#define SCM_PACRn_LOCK1 (0x80) +#define SCM_PACRn_ACCESSCTRL1(x) (((x)&0x07)<<4) +#define SCM_PACRn_LOCK0 (0x08) +#define SCM_PACRn_ACCESSCTRL0(x) (((x)&0x07)) + +/* Bit definitions and macros for SCM_GPACR */ +#define SCM_PACRn_LOCK (0x80) +#define SCM_PACRn_ACCESSCTRL0(x) (((x)&0x07)) + +/********************************************************************* +* SDRAM Controller (SDRAMC) +*********************************************************************/ +/* Bit definitions and macros for SDRAMC_DCR */ +#define SDRAMC_DCR_NAM (0x2000) +#define SDRAMC_DCR_COC (0x1000) +#define SDRAMC_DCR_IS (0x0800) +#define SDRAMC_DCR_RTIM_MASK (0x0C00) +#define SDRAMC_DCR_RTIM_3CLKS (0x0000) +#define SDRAMC_DCR_RTIM_6CLKS (0x0200) +#define SDRAMC_DCR_RTIM_9CLKS (0x0400) +#define SDRAMC_DCR_RC(x) (((x)&0xFF)<<8) + +/* Bit definitions and macros for SDRAMC_DARCn */ +#define SDRAMC_DARCn_BA(x) (((x)&0xFFFC)<<18) +#define SDRAMC_DARCn_RE (0x00008000) +#define SDRAMC_DARCn_CASL_MASK (0x00003000) +#define SDRAMC_DARCn_CASL_C0 (0x00000000) +#define SDRAMC_DARCn_CASL_C1 (0x00001000) +#define SDRAMC_DARCn_CASL_C2 (0x00002000) +#define SDRAMC_DARCn_CASL_C3 (0x00003000) +#define SDRAMC_DARCn_CBM_MASK (0x00000700) +#define SDRAMC_DARCn_CBM_CMD17 (0x00000000) +#define SDRAMC_DARCn_CBM_CMD18 (0x00000100) +#define SDRAMC_DARCn_CBM_CMD19 (0x00000200) +#define SDRAMC_DARCn_CBM_CMD20 (0x00000300) +#define SDRAMC_DARCn_CBM_CMD21 (0x00000400) +#define SDRAMC_DARCn_CBM_CMD22 (0x00000500) +#define SDRAMC_DARCn_CBM_CMD23 (0x00000600) +#define SDRAMC_DARCn_CBM_CMD24 (0x00000700) +#define SDRAMC_DARCn_IMRS (0x00000040) +#define SDRAMC_DARCn_PS_MASK (0x00000030) +#define SDRAMC_DARCn_PS_32 (0x00000000) +#define SDRAMC_DARCn_PS_16 (0x00000010) +#define SDRAMC_DARCn_PS_8 (0x00000020) +#define SDRAMC_DARCn_IP (0x00000008) + +/* Bit definitions and macros for SDRAMC_DMRn */ +#define SDRAMC_DMRn_BAM(x) (((x)&0x3FFF)<<18) +#define SDRAMC_DMRn_WP (0x00000100) +#define SDRAMC_DMRn_V (0x00000001) + +/********************************************************************* +* FlexBus Chip Selects (FBCS) +*********************************************************************/ +/* Bit definitions and macros for FBCS_CSMR */ +#define FBCS_CSMR_BAM(x) (((x)&0xFFFF)<<16) +#define FBCS_CSMR_BAM_4G (0xFFFF0000) +#define FBCS_CSMR_BAM_2G (0x7FFF0000) +#define FBCS_CSMR_BAM_1G (0x3FFF0000) +#define FBCS_CSMR_BAM_1024M (0x3FFF0000) +#define FBCS_CSMR_BAM_512M (0x1FFF0000) +#define FBCS_CSMR_BAM_256M (0x0FFF0000) +#define FBCS_CSMR_BAM_128M (0x07FF0000) +#define FBCS_CSMR_BAM_64M (0x03FF0000) +#define FBCS_CSMR_BAM_32M (0x01FF0000) +#define FBCS_CSMR_BAM_16M (0x00FF0000) +#define FBCS_CSMR_BAM_8M (0x007F0000) +#define FBCS_CSMR_BAM_4M (0x003F0000) +#define FBCS_CSMR_BAM_2M (0x001F0000) +#define FBCS_CSMR_BAM_1M (0x000F0000) +#define FBCS_CSMR_BAM_1024K (0x000F0000) +#define FBCS_CSMR_BAM_512K (0x00070000) +#define FBCS_CSMR_BAM_256K (0x00030000) +#define FBCS_CSMR_BAM_128K (0x00010000) +#define FBCS_CSMR_BAM_64K (0x00000000) +#define FBCS_CSMR_WP (0x00000100) +#define FBCS_CSMR_V (0x00000001) + +/* Bit definitions and macros for FBCS_CSCR */ +#define FBCS_CSCR_SRWS(x) (((x)&0x03)<<14) +#define FBCS_CSCR_IWS(x) (((x)&0x0F)<<10) +#define FBCS_CSCR_AA (0x0100) +#define FBCS_CSCR_PS_MASK (0x00C0) +#define FBCS_CSCR_PS_32 (0x0000) +#define FBCS_CSCR_PS_16 (0x0080) +#define FBCS_CSCR_PS_8 (0x0040) +#define FBCS_CSCR_BEM (0x0020) +#define FBCS_CSCR_BSTR (0x0010) +#define FBCS_CSCR_BSTW (0x0008) +#define FBCS_CSCR_SWWS(x) ((x)&0x07) + +/********************************************************************* +* Queued Serial Peripheral Interface (QSPI) +*********************************************************************/ +/* Bit definitions and macros for QSPI_QMR */ +#define QSPI_QMR_MSTR (0x8000) +#define QSPI_QMR_DOHIE (0x4000) +#define QSPI_QMR_BITS(x) (((x)&0x000F)<<10) +#define QSPI_QMR_CPOL (0x0200) +#define QSPI_QMR_CPHA (0x0100) +#define QSPI_QMR_BAUD(x) ((x)&0x00FF) + +/* Bit definitions and macros for QSPI_QDLYR */ +#define QSPI_QDLYR_SPE (0x8000) +#define QSPI_QDLYR_QCD(x) (((x)&0x007F)<<8) +#define QSPI_QDLYR_DTL(x) ((x)&0x00FF) + +/* Bit definitions and macros for QSPI_QWR */ +#define QSPI_QWR_HALT (0x8000) +#define QSPI_QWR_WREN (0x4000) +#define QSPI_QWR_WRTO (0x2000) +#define QSPI_QWR_CSIV (0x1000) +#define QSPI_QWR_ENDQP(x) (((x)&0x000F)<<8) +#define QSPI_QWR_NEWQP(x) ((x)&0x000F) + +/* Bit definitions and macros for QSPI_QIR */ +#define QSPI_QIR_WCEFB (0x8000) +#define QSPI_QIR_ABRTB (0x4000) +#define QSPI_QIR_ABRTL (0x1000) +#define QSPI_QIR_WCEFE (0x0800) +#define QSPI_QIR_ABRTE (0x0400) +#define QSPI_QIR_SPIFE (0x0100) +#define QSPI_QIR_WCEF (0x0008) +#define QSPI_QIR_ABRT (0x0004) +#define QSPI_QIR_SPIF (0x0001) + +/* Bit definitions and macros for QSPI_QAR */ +#define QSPI_QAR_ADDR(x) ((x)&0x003F) + +/* Bit definitions and macros for QSPI_QDR */ +#define QSPI_QDR_CONT (0x8000) +#define QSPI_QDR_BITSE (0x4000) +#define QSPI_QDR_DT (0x2000) +#define QSPI_QDR_DSCK (0x1000) +#define QSPI_QDR_QSPI_CS3 (0x0800) +#define QSPI_QDR_QSPI_CS2 (0x0400) +#define QSPI_QDR_QSPI_CS1 (0x0200) +#define QSPI_QDR_QSPI_CS0 (0x0100) + +/********************************************************************* +* Interrupt Controller (INTC) +*********************************************************************/ +#define INT0_LO_RSVD0 (0) +#define INT0_LO_EPORT1 (1) +#define INT0_LO_EPORT2 (2) +#define INT0_LO_EPORT3 (3) +#define INT0_LO_EPORT4 (4) +#define INT0_LO_EPORT5 (5) +#define INT0_LO_EPORT6 (6) +#define INT0_LO_EPORT7 (7) +#define INT0_LO_SCM (8) +#define INT0_LO_DMA0 (9) +#define INT0_LO_DMA1 (10) +#define INT0_LO_DMA2 (11) +#define INT0_LO_DMA3 (12) +#define INT0_LO_UART0 (13) +#define INT0_LO_UART1 (14) +#define INT0_LO_UART2 (15) +#define INT0_LO_RSVD1 (16) +#define INT0_LO_I2C (17) +#define INT0_LO_QSPI (18) +#define INT0_LO_DTMR0 (19) +#define INT0_LO_DTMR1 (20) +#define INT0_LO_DTMR2 (21) +#define INT0_LO_DTMR3 (22) +#define INT0_LO_FEC_TXF (23) +#define INT0_LO_FEC_TXB (24) +#define INT0_LO_FEC_UN (25) +#define INT0_LO_FEC_RL (26) +#define INT0_LO_FEC_RXF (27) +#define INT0_LO_FEC_RXB (28) +#define INT0_LO_FEC_MII (29) +#define INT0_LO_FEC_LC (30) +#define INT0_LO_FEC_HBERR (31) +#define INT0_HI_FEC_GRA (32) +#define INT0_HI_FEC_EBERR (33) +#define INT0_HI_FEC_BABT (34) +#define INT0_HI_FEC_BABR (35) +#define INT0_HI_PIT0 (36) +#define INT0_HI_PIT1 (37) +#define INT0_HI_PIT2 (38) +#define INT0_HI_PIT3 (39) +#define INT0_HI_RNG (40) +#define INT0_HI_SKHA (41) +#define INT0_HI_MDHA (42) +#define INT0_HI_CAN1_BUF0I (43) +#define INT0_HI_CAN1_BUF1I (44) +#define INT0_HI_CAN1_BUF2I (45) +#define INT0_HI_CAN1_BUF3I (46) +#define INT0_HI_CAN1_BUF4I (47) +#define INT0_HI_CAN1_BUF5I (48) +#define INT0_HI_CAN1_BUF6I (49) +#define INT0_HI_CAN1_BUF7I (50) +#define INT0_HI_CAN1_BUF8I (51) +#define INT0_HI_CAN1_BUF9I (52) +#define INT0_HI_CAN1_BUF10I (53) +#define INT0_HI_CAN1_BUF11I (54) +#define INT0_HI_CAN1_BUF12I (55) +#define INT0_HI_CAN1_BUF13I (56) +#define INT0_HI_CAN1_BUF14I (57) +#define INT0_HI_CAN1_BUF15I (58) +#define INT0_HI_CAN1_ERRINT (59) +#define INT0_HI_CAN1_BOFFINT (60) +/* 60-63 Reserved */ + +/* 0 - 7 Reserved */ +#define INT1_LO_CAN1_BUF0I (8) +#define INT1_LO_CAN1_BUF1I (9) +#define INT1_LO_CAN1_BUF2I (10) +#define INT1_LO_CAN1_BUF3I (11) +#define INT1_LO_CAN1_BUF4I (12) +#define INT1_LO_CAN1_BUF5I (13) +#define INT1_LO_CAN1_BUF6I (14) +#define INT1_LO_CAN1_BUF7I (15) +#define INT1_LO_CAN1_BUF8I (16) +#define INT1_LO_CAN1_BUF9I (17) +#define INT1_LO_CAN1_BUF10I (18) +#define INT1_LO_CAN1_BUF11I (19) +#define INT1_LO_CAN1_BUF12I (20) +#define INT1_LO_CAN1_BUF13I (21) +#define INT1_LO_CAN1_BUF14I (22) +#define INT1_LO_CAN1_BUF15I (23) +#define INT1_LO_CAN1_ERRINT (24) +#define INT1_LO_CAN1_BOFFINT (25) +/* 26 Reserved */ +#define INT1_LO_ETPU_TC0F (27) +#define INT1_LO_ETPU_TC1F (28) +#define INT1_LO_ETPU_TC2F (29) +#define INT1_LO_ETPU_TC3F (30) +#define INT1_LO_ETPU_TC4F (31) +#define INT1_HI_ETPU_TC5F (32) +#define INT1_HI_ETPU_TC6F (33) +#define INT1_HI_ETPU_TC7F (34) +#define INT1_HI_ETPU_TC8F (35) +#define INT1_HI_ETPU_TC9F (36) +#define INT1_HI_ETPU_TC10F (37) +#define INT1_HI_ETPU_TC11F (38) +#define INT1_HI_ETPU_TC12F (39) +#define INT1_HI_ETPU_TC13F (40) +#define INT1_HI_ETPU_TC14F (41) +#define INT1_HI_ETPU_TC15F (42) +#define INT1_HI_ETPU_TC16F (43) +#define INT1_HI_ETPU_TC17F (44) +#define INT1_HI_ETPU_TC18F (45) +#define INT1_HI_ETPU_TC19F (46) +#define INT1_HI_ETPU_TC20F (47) +#define INT1_HI_ETPU_TC21F (48) +#define INT1_HI_ETPU_TC22F (49) +#define INT1_HI_ETPU_TC23F (50) +#define INT1_HI_ETPU_TC24F (51) +#define INT1_HI_ETPU_TC25F (52) +#define INT1_HI_ETPU_TC26F (53) +#define INT1_HI_ETPU_TC27F (54) +#define INT1_HI_ETPU_TC28F (55) +#define INT1_HI_ETPU_TC29F (56) +#define INT1_HI_ETPU_TC30F (57) +#define INT1_HI_ETPU_TC31F (58) +#define INT1_HI_ETPU_TGIF (59) + +/* Bit definitions and macros for INTC_IPRH */ +#define INTC_IPRH_INT63 (0x80000000) +#define INTC_IPRH_INT62 (0x40000000) +#define INTC_IPRH_INT61 (0x20000000) +#define INTC_IPRH_INT60 (0x10000000) +#define INTC_IPRH_INT59 (0x08000000) +#define INTC_IPRH_INT58 (0x04000000) +#define INTC_IPRH_INT57 (0x02000000) +#define INTC_IPRH_INT56 (0x01000000) +#define INTC_IPRH_INT55 (0x00800000) +#define INTC_IPRH_INT54 (0x00400000) +#define INTC_IPRH_INT53 (0x00200000) +#define INTC_IPRH_INT52 (0x00100000) +#define INTC_IPRH_INT51 (0x00080000) +#define INTC_IPRH_INT50 (0x00040000) +#define INTC_IPRH_INT49 (0x00020000) +#define INTC_IPRH_INT48 (0x00010000) +#define INTC_IPRH_INT47 (0x00008000) +#define INTC_IPRH_INT46 (0x00004000) +#define INTC_IPRH_INT45 (0x00002000) +#define INTC_IPRH_INT44 (0x00001000) +#define INTC_IPRH_INT43 (0x00000800) +#define INTC_IPRH_INT42 (0x00000400) +#define INTC_IPRH_INT41 (0x00000200) +#define INTC_IPRH_INT40 (0x00000100) +#define INTC_IPRH_INT39 (0x00000080) +#define INTC_IPRH_INT38 (0x00000040) +#define INTC_IPRH_INT37 (0x00000020) +#define INTC_IPRH_INT36 (0x00000010) +#define INTC_IPRH_INT35 (0x00000008) +#define INTC_IPRH_INT34 (0x00000004) +#define INTC_IPRH_INT33 (0x00000002) +#define INTC_IPRH_INT32 (0x00000001) + +/* Bit definitions and macros for INTC_IPRL */ +#define INTC_IPRL_INT31 (0x80000000) +#define INTC_IPRL_INT30 (0x40000000) +#define INTC_IPRL_INT29 (0x20000000) +#define INTC_IPRL_INT28 (0x10000000) +#define INTC_IPRL_INT27 (0x08000000) +#define INTC_IPRL_INT26 (0x04000000) +#define INTC_IPRL_INT25 (0x02000000) +#define INTC_IPRL_INT24 (0x01000000) +#define INTC_IPRL_INT23 (0x00800000) +#define INTC_IPRL_INT22 (0x00400000) +#define INTC_IPRL_INT21 (0x00200000) +#define INTC_IPRL_INT20 (0x00100000) +#define INTC_IPRL_INT19 (0x00080000) +#define INTC_IPRL_INT18 (0x00040000) +#define INTC_IPRL_INT17 (0x00020000) +#define INTC_IPRL_INT16 (0x00010000) +#define INTC_IPRL_INT15 (0x00008000) +#define INTC_IPRL_INT14 (0x00004000) +#define INTC_IPRL_INT13 (0x00002000) +#define INTC_IPRL_INT12 (0x00001000) +#define INTC_IPRL_INT11 (0x00000800) +#define INTC_IPRL_INT10 (0x00000400) +#define INTC_IPRL_INT9 (0x00000200) +#define INTC_IPRL_INT8 (0x00000100) +#define INTC_IPRL_INT7 (0x00000080) +#define INTC_IPRL_INT6 (0x00000040) +#define INTC_IPRL_INT5 (0x00000020) +#define INTC_IPRL_INT4 (0x00000010) +#define INTC_IPRL_INT3 (0x00000008) +#define INTC_IPRL_INT2 (0x00000004) +#define INTC_IPRL_INT1 (0x00000002) +#define INTC_IPRL_INT0 (0x00000001) + +/* Bit definitions and macros for INTC_IRLR */ +#define INTC_IRLRn(x) (((x)&0x7F)<<1) + +/* Bit definitions and macros for INTC_IACKLPRn */ +#define INTC_IACKLPRn_LEVEL(x) (((x)&0x07)<<4) +#define INTC_IACKLPRn_PRI(x) ((x)&0x0F) + +/* Bit definitions and macros for INTC_ICRnx */ +#define INTC_ICRnx_IL(x) (((x)&0x07)<<3) +#define INTC_ICRnx_IP(x) ((x)&0x07) + +/********************************************************************* +* General Purpose I/O (GPIO) +*********************************************************************/ +/* Bit definitions and macros for GPIO_PODR */ +#define GPIO_PODR_ADDR(x) (((x)&0x07)<<5) +#define GPIO_PODR_ADDR_MASK (0xE0) +#define GPIO_PODR_BS(x) ((x)&0x0F) +#define GPIO_PODR_BS_MASK (0x0F) +#define GPIO_PODR_CS(x) (((x)&0x7F)<<1) +#define GPIO_PODR_CS_MASK (0xFE) +#define GPIO_PODR_SDRAM(X) ((x)&0x3F) +#define GPIO_PODR_SDRAM_MASK (0x3F) +#define GPIO_PODR_FECI2C(x) GPIO_PODR_BS(x) +#define GPIO_PODR_FECI2C_MASK GPIO_PODR_BS_MASK +#define GPIO_PODR_UARTH(x) ((x)&0x03) +#define GPIO_PODR_UARTH_MASK (0x03) +#define GPIO_PODR_QSPI(x) ((x)&0x1F) +#define GPIO_PODR_QSPI_MASK (0x1F) +#define GPIO_PODR_ETPU(x) ((x)&0x07) +#define GPIO_PODR_ETPU_MASK (0x07) + +/* Bit definitions and macros for GPIO_PDDR */ +#define GPIO_PDDR_ADDR(x) GPIO_PODR_ADDR(x) +#define GPIO_PDDR_ADDR_MASK GPIO_PODR_ADDR_MASK +#define GPIO_PDDR_BS(x) GPIO_PODR_BS(x) +#define GPIO_PDDR_BS_MASK GPIO_PODR_BS_MASK +#define GPIO_PDDR_CS(x) GPIO_PODR_CS(x) +#define GPIO_PDDR_CS_MASK GPIO_PODR_CS_MASK +#define GPIO_PDDR_SDRAM(X) GPIO_PODR_SDRAM(X) +#define GPIO_PDDR_SDRAM_MASK GPIO_PODR_SDRAM_MASK +#define GPIO_PDDR_FECI2C(x) GPIO_PDDR_BS(x) +#define GPIO_PDDR_FECI2C_MASK GPIO_PDDR_BS_MASK +#define GPIO_PDDR_UARTH(x) GPIO_PODR_UARTH(x) +#define GPIO_PDDR_UARTH_MASK GPIO_PODR_UARTH_MASK +#define GPIO_PDDR_QSPI(x) GPIO_PODR_QSPI(x) +#define GPIO_PDDR_QSPI_MASK GPIO_PODR_QSPI_MASK +#define GPIO_PDDR_ETPU(x) GPIO_PODR_ETPU(x) +#define GPIO_PDDR_ETPU_MASK GPIO_PODR_ETPU_MASK + +/* Bit definitions and macros for GPIO_PPDSDR */ +#define GPIO_PPDSDR_ADDR(x) GPIO_PODR_ADDR(x) +#define GPIO_PPDSDR_ADDR_MASK GPIO_PODR_ADDR_MASK +#define GPIO_PPDSDR_BS(x) GPIO_PODR_BS(x) +#define GPIO_PPDSDR_BS_MASK GPIO_PODR_BS_MASK +#define GPIO_PPDSDR_CS(x) GPIO_PODR_CS(x) +#define GPIO_PPDSDR_CS_MASK GPIO_PODR_CS_MASK +#define GPIO_PPDSDR_SDRAM(X) GPIO_PODR_SDRAM(X) +#define GPIO_PPDSDR_SDRAM_MASK GPIO_PODR_SDRAM_MASK +#define GPIO_PPDSDR_FECI2C(x) GPIO_PPDSDR_BS(x) +#define GPIO_PPDSDR_FECI2C_MASK GPIO_PPDSDR_BS_MASK +#define GPIO_PPDSDR_UARTH(x) GPIO_PODR_UARTH(x) +#define GPIO_PPDSDR_UARTH_MASK GPIO_PODR_UARTH_MASK +#define GPIO_PPDSDR_QSPI(x) GPIO_PODR_QSPI(x) +#define GPIO_PPDSDR_QSPI_MASK GPIO_PODR_QSPI_MASK +#define GPIO_PPDSDR_ETPU(x) GPIO_PODR_ETPU(x) +#define GPIO_PPDSDR_ETPU_MASK GPIO_PODR_ETPU_MASK + +/* Bit definitions and macros for GPIO_PCLRR */ +#define GPIO_PCLRR_ADDR(x) GPIO_PODR_ADDR(x) +#define GPIO_PCLRR_ADDR_MASK GPIO_PODR_ADDR_MASK +#define GPIO_PCLRR_BS(x) GPIO_PODR_BS(x) +#define GPIO_PCLRR_BS_MASK GPIO_PODR_BS_MASK +#define GPIO_PCLRR_CS(x) GPIO_PODR_CS(x) +#define GPIO_PCLRR_CS_MASK GPIO_PODR_CS_MASK +#define GPIO_PCLRR_SDRAM(X) GPIO_PODR_SDRAM(X) +#define GPIO_PCLRR_SDRAM_MASK GPIO_PODR_SDRAM_MASK +#define GPIO_PCLRR_FECI2C(x) GPIO_PCLRR_BS(x) +#define GPIO_PCLRR_FECI2C_MASK GPIO_PCLRR_BS_MASK +#define GPIO_PCLRR_UARTH(x) GPIO_PODR_UARTH(x) +#define GPIO_PCLRR_UARTH_MASK GPIO_PODR_UARTH_MASK +#define GPIO_PCLRR_QSPI(x) GPIO_PODR_QSPI(x) +#define GPIO_PCLRR_QSPI_MASK GPIO_PODR_QSPI_MASK +#define GPIO_PCLRR_ETPU(x) GPIO_PODR_ETPU(x) +#define GPIO_PCLRR_ETPU_MASK GPIO_PODR_ETPU_MASK + +/* Bit definitions and macros for GPIO_PAR */ +#define GPIO_PAR_AD_ADDR23 (0x80) +#define GPIO_PAR_AD_ADDR22 (0x40) +#define GPIO_PAR_AD_ADDR21 (0x20) +#define GPIO_PAR_AD_DATAL (0x01) +#define GPIO_PAR_BUSCTL_OE (0x4000) +#define GPIO_PAR_BUSCTL_TA (0x1000) +#define GPIO_PAR_BUSCTL_TEA(x) (((x)&0x03)<<10) +#define GPIO_PAR_BUSCTL_TEA_MASK (0x0C00) +#define GPIO_PAR_BUSCTL_TEA_GPIO (0x0400) +#define GPIO_PAR_BUSCTL_TEA_DREQ1 (0x0800) +#define GPIO_PAR_BUSCTL_TEA_EXTBUS (0x0C00) +#define GPIO_PAR_BUSCTL_RWB (0x0100) +#define GPIO_PAR_BUSCTL_TSIZ1 (0x0040) +#define GPIO_PAR_BUSCTL_TSIZ0 (0x0010) +#define GPIO_PAR_BUSCTL_TS(x) (((x)&0x03)<<2) +#define GPIO_PAR_BUSCTL_TS_MASK (0x0C) +#define GPIO_PAR_BUSCTL_TS_GPIO (0x04) +#define GPIO_PAR_BUSCTL_TS_DACK2 (0x08) +#define GPIO_PAR_BUSCTL_TS_EXTBUS (0x0C) +#define GPIO_PAR_BUSCTL_TIP(x) ((x)&0x03) +#define GPIO_PAR_BUSCTL_TIP_MASK (0x03) +#define GPIO_PAR_BUSCTL_TIP_GPIO (0x01) +#define GPIO_PAR_BUSCTL_TIP_DREQ0 (0x02) +#define GPIO_PAR_BUSCTL_TIP_EXTBUS (0x03) +#define GPIO_PAR_BS(x) ((x)&0x0F) +#define GPIO_PAR_BS_MASK (0x0F) +#define GPIO_PAR_CS(x) (((x)&0x7F)<<1) +#define GPIO_PAR_CS_MASK (0xFE) +#define GPIO_PAR_CS_CS7 (0x80) +#define GPIO_PAR_CS_CS6 (0x40) +#define GPIO_PAR_CS_CS5 (0x20) +#define GPIO_PAR_CS_CS4 (0x10) +#define GPIO_PAR_CS_CS3 (0x08) +#define GPIO_PAR_CS_CS2 (0x04) +#define GPIO_PAR_CS_CS1 (0x02) +#define GPIO_PAR_CS_SD3 GPIO_PAR_CS_CS3 +#define GPIO_PAR_CS_SD2 GPIO_PAR_CS_CS2 +#define GPIO_PAR_SDRAM_CSSDCS(x) (((x)&0x03)<<6) +#define GPIO_PAR_SDRAM_CSSDCS_MASK (0xC0) +#define GPIO_PAR_SDRAM_SDWE (0x20) +#define GPIO_PAR_SDRAM_SCAS (0x10) +#define GPIO_PAR_SDRAM_SRAS (0x08) +#define GPIO_PAR_SDRAM_SCKE (0x04) +#define GPIO_PAR_SDRAM_SDCS(x) ((x)&0x03) +#define GPIO_PAR_SDRAM_SDCS_MASK (0x03) +#define GPIO_PAR_FECI2C_EMDC(x) (((x)&0x03)<<6) +#define GPIO_PAR_FECI2C_EMDC_MASK (0xC0) +#define GPIO_PAR_FECI2C_EMDC_U2TXD (0x40) +#define GPIO_PAR_FECI2C_EMDC_I2CSCL (0x80) +#define GPIO_PAR_FECI2C_EMDC_FECEMDC (0xC0) +#define GPIO_PAR_FECI2C_EMDIO(x) (((x)&0x03)<<4) +#define GPIO_PAR_FECI2C_EMDIO_MASK (0x30) +#define GPIO_PAR_FECI2C_EMDIO_U2RXD (0x10) +#define GPIO_PAR_FECI2C_EMDIO_I2CSDA (0x20) +#define GPIO_PAR_FECI2C_EMDIO_FECEMDIO (0x30) +#define GPIO_PAR_FECI2C_SCL(x) (((x)&0x03)<<2) +#define GPIO_PAR_FECI2C_SCL_MASK (0x0C) +#define GPIO_PAR_FECI2C_SCL_CAN0RX (0x08) +#define GPIO_PAR_FECI2C_SCL_I2CSCL (0x0C) +#define GPIO_PAR_FECI2C_SDA(x) ((x)&0x03) +#define GPIO_PAR_FECI2C_SDA_MASK (0x03) +#define GPIO_PAR_FECI2C_SDA_CAN0TX (0x02) +#define GPIO_PAR_FECI2C_SDA_I2CSDA (0x03) +#define GPIO_PAR_UART_DREQ2 (0x8000) +#define GPIO_PAR_UART_CAN1EN (0x4000) +#define GPIO_PAR_UART_U2RXD (0x2000) +#define GPIO_PAR_UART_U2TXD (0x1000) +#define GPIO_PAR_UART_U1RXD(x) (((x)&0x03)<<10) +#define GPIO_PAR_UART_U1RXD_MASK (0x0C00) +#define GPIO_PAR_UART_U1RXD_CAN0RX (0x0800) +#define GPIO_PAR_UART_U1RXD_U1RXD (0x0C00) +#define GPIO_PAR_UART_U1TXD(x) (((x)&0x03)<<8) +#define GPIO_PAR_UART_U1TXD_MASK (0x0300) +#define GPIO_PAR_UART_U1TXD_CAN0TX (0x0200) +#define GPIO_PAR_UART_U1TXD_U1TXD (0x0300) +#define GPIO_PAR_UART_U1CTS(x) (((x)&0x03)<<6) +#define GPIO_PAR_UART_U1CTS_MASK (0x00C0) +#define GPIO_PAR_UART_U1CTS_U2CTS (0x0080) +#define GPIO_PAR_UART_U1CTS_U1CTS (0x00C0) +#define GPIO_PAR_UART_U1RTS(x) (((x)&0x03)<<4) +#define GPIO_PAR_UART_U1RTS_MASK (0x0030) +#define GPIO_PAR_UART_U1RTS_U2RTS (0x0020) +#define GPIO_PAR_UART_U1RTS_U1RTS (0x0030) +#define GPIO_PAR_UART_U0RXD (0x0008) +#define GPIO_PAR_UART_U0TXD (0x0004) +#define GPIO_PAR_UART_U0CTS (0x0002) +#define GPIO_PAR_UART_U0RTS (0x0001) +#define GPIO_PAR_QSPI_CS1(x) (((x)&0x03)<<6) +#define GPIO_PAR_QSPI_CS1_MASK (0xC0) +#define GPIO_PAR_QSPI_CS1_SDRAMSCKE (0x80) +#define GPIO_PAR_QSPI_CS1_QSPICS1 (0xC0) +#define GPIO_PAR_QSPI_CS0 (0x20) +#define GPIO_PAR_QSPI_DIN(x) (((x)&0x03)<<3) +#define GPIO_PAR_QSPI_DIN_MASK (0x18) +#define GPIO_PAR_QSPI_DIN_I2CSDA (0x10) +#define GPIO_PAR_QSPI_DIN_QSPIDIN (0x18) +#define GPIO_PAR_QSPI_DOUT (0x04) +#define GPIO_PAR_QSPI_SCK(x) ((x)&0x03) +#define GPIO_PAR_QSPI_SCK_MASK (0x03) +#define GPIO_PAR_QSPI_SCK_I2CSCL (0x02) +#define GPIO_PAR_QSPI_SCK_QSPISCK (0x03) +#define GPIO_PAR_DT3IN(x) (((x)&0x03)<<14) +#define GPIO_PAR_DT3IN_MASK (0xC000) +#define GPIO_PAR_DT3IN_QSPICS2 (0x4000) +#define GPIO_PAR_DT3IN_U2CTS (0x8000) +#define GPIO_PAR_DT3IN_DT3IN (0xC000) +#define GPIO_PAR_DT2IN(x) (((x)&0x03)<<12) +#define GPIO_PAR_DT2IN_MASK (0x3000) +#define GPIO_PAR_DT2IN_DT2OUT (0x1000) +#define GPIO_PAR_DT2IN_DREQ2 (0x2000) +#define GPIO_PAR_DT2IN_DT2IN (0x3000) +#define GPIO_PAR_DT1IN(x) (((x)&0x03)<<10) +#define GPIO_PAR_DT1IN_MASK (0x0C00) +#define GPIO_PAR_DT1IN_DT1OUT (0x0400) +#define GPIO_PAR_DT1IN_DREQ1 (0x0800) +#define GPIO_PAR_DT1IN_DT1IN (0x0C00) +#define GPIO_PAR_DT0IN(x) (((x)&0x03)<<8) +#define GPIO_PAR_DT0IN_MASK (0x0300) +#define GPIO_PAR_DT0IN_DREQ0 (0x0200) +#define GPIO_PAR_DT0IN_DT0IN (0x0300) +#define GPIO_PAR_DT3OUT(x) (((x)&0x03)<<6) +#define GPIO_PAR_DT3OUT_MASK (0x00C0) +#define GPIO_PAR_DT3OUT_QSPICS3 (0x0040) +#define GPIO_PAR_DT3OUT_U2RTS (0x0080) +#define GPIO_PAR_DT3OUT_DT3OUT (0x00C0) +#define GPIO_PAR_DT2OUT(x) (((x)&0x03)<<4) +#define GPIO_PAR_DT2OUT_MASK (0x0030) +#define GPIO_PAR_DT2OUT_DACK2 (0x0020) +#define GPIO_PAR_DT2OUT_DT2OUT (0x0030) +#define GPIO_PAR_DT1OUT(x) (((x)&0x03)<<2) +#define GPIO_PAR_DT1OUT_MASK (0x000C) +#define GPIO_PAR_DT1OUT_DACK1 (0x0008) +#define GPIO_PAR_DT1OUT_DT1OUT (0x000C) +#define GPIO_PAR_DT0OUT(x) ((x)&0x03) +#define GPIO_PAR_DT0OUT_MASK (0x0003) +#define GPIO_PAR_DT0OUT_DACK0 (0x0002) +#define GPIO_PAR_DT0OUT_DT0OUT (0x0003) +#define GPIO_PAR_ETPU_TCRCLK (0x04) +#define GPIO_PAR_ETPU_UTPU_ODIS (0x02) +#define GPIO_PAR_ETPU_LTPU_ODIS (0x01) + +/* Bit definitions and macros for GPIO_DSCR */ +#define GPIO_DSCR_EIM_EIM1 (0x10) +#define GPIO_DSCR_EIM_EIM0 (0x01) +#define GPIO_DSCR_ETPU_ETPU31_24 (0x40) +#define GPIO_DSCR_ETPU_ETPU23_16 (0x10) +#define GPIO_DSCR_ETPU_ETPU15_8 (0x04) +#define GPIO_DSCR_ETPU_ETPU7_0 (0x01) +#define GPIO_DSCR_FECI2C_FEC (0x10) +#define GPIO_DSCR_FECI2C_I2C (0x01) +#define GPIO_DSCR_UART_IRQ (0x40) +#define GPIO_DSCR_UART_UART2 (0x10) +#define GPIO_DSCR_UART_UART1 (0x04) +#define GPIO_DSCR_UART_UART0 (0x01) +#define GPIO_DSCR_QSPI_QSPI (0x01) +#define GPIO_DSCR_TIMER (0x01) + +/********************************************************************* +* Chip Configuration Module (CCM) +*********************************************************************/ +/* Bit definitions and macros for CCM_RCR */ +#define CCM_RCR_SOFTRST (0x80) +#define CCM_RCR_FRCRSTOUT (0x40) + +/* Bit definitions and macros for CCM_RSR */ +#define CCM_RSR_SOFT (0x20) +#define CCM_RSR_WDR (0x10) +#define CCM_RSR_POR (0x08) +#define CCM_RSR_EXT (0x04) +#define CCM_RSR_LOC (0x02) +#define CCM_RSR_LOL (0x01) + +/* Bit definitions and macros for CCM_CCR */ +#define CCM_CCR_LOAD (0x8000) +#define CCM_CCR_SZEN (0x0040) +#define CCM_CCR_PSTEN (0x0020) +#define CCM_CCR_BME (0x0008) +#define CCM_CCR_BMT(x) ((x)&0x07) +#define CCM_CCR_BMT_MASK (0x0007) +#define CCM_CCR_BMT_64K (0x0000) +#define CCM_CCR_BMT_32K (0x0001) +#define CCM_CCR_BMT_16K (0x0002) +#define CCM_CCR_BMT_8K (0x0003) +#define CCM_CCR_BMT_4K (0x0004) +#define CCM_CCR_BMT_2K (0x0005) +#define CCM_CCR_BMT_1K (0x0006) +#define CCM_CCR_BMT_512 (0x0007) + +/* Bit definitions and macros for CCM_RCON */ +#define CCM_RCON_RCSC(x) (((x)&0x0003)<<8) +#define CCM_RCON_RLOAD (0x0020) +#define CCM_RCON_BOOTPS(x) (((x)&0x0003)<<3) +#define CCM_RCON_BOOTPS_MASK (0x0018) +#define CCM_RCON_BOOTPS_32 (0x0018) +#define CCM_RCON_BOOTPS_16 (0x0008) +#define CCM_RCON_BOOTPS_8 (0x0010) +#define CCM_RCON_MODE (0x0001) + +/* Bit definitions and macros for CCM_CIR */ +#define CCM_CIR_PIN(x) (((x)&0x03FF)<<6) +#define CCM_CIR_PRN(x) ((x)&0x003F) + +/********************************************************************* +* PLL Clock Module +*********************************************************************/ +/* Bit definitions and macros for PLL_SYNCR */ +#define PLL_SYNCR_MFD(x) (((x)&0x07)<<24) +#define PLL_SYNCR_MFD_MASK (0x07000000) +#define PLL_SYNCR_RFC(x) (((x)&0x07)<<19) +#define PLL_SYNCR_RFC_MASK (0x00380000) +#define PLL_SYNCR_LOCEN (0x00040000) +#define PLL_SYNCR_LOLRE (0x00020000) +#define PLL_SYNCR_LOCRE (0x00010000) +#define PLL_SYNCR_DISCLK (0x00008000) +#define PLL_SYNCR_LOLIRQ (0x00004000) +#define PLL_SYNCR_LOCIRQ (0x00002000) +#define PLL_SYNCR_RATE (0x00001000) +#define PLL_SYNCR_DEPTH(x) (((x)&0x03)<<10) +#define PLL_SYNCR_EXP(x) ((x)&0x03FF) + +/* Bit definitions and macros for PLL_SYNSR */ +#define PLL_SYNSR_LOLF (0x00000200) +#define PLL_SYNSR_LOC (0x00000100) +#define PLL_SYNSR_MODE (0x00000080) +#define PLL_SYNSR_PLLSEL (0x00000040) +#define PLL_SYNSR_PLLREF (0x00000020) +#define PLL_SYNSR_LOCKS (0x00000010) +#define PLL_SYNSR_LOCK (0x00000008) +#define PLL_SYNSR_LOCF (0x00000004) +#define PLL_SYNSR_CALDONE (0x00000002) +#define PLL_SYNSR_CALPASS (0x00000001) + +/********************************************************************* + * Edge Port +*********************************************************************/ +#define EPORT_EPPAR_EPPA7(x) (((x)&0x03)<<14) +#define EPORT_EPPAR_EPPA6(x) (((x)&0x03)<<12) +#define EPORT_EPPAR_EPPA5(x) (((x)&0x03)<<10) +#define EPORT_EPPAR_EPPA4(x) (((x)&0x03)<<8) +#define EPORT_EPPAR_EPPA3(x) (((x)&0x03)<<6) +#define EPORT_EPPAR_EPPA2(x) (((x)&0x03)<<4) +#define EPORT_EPPAR_EPPA1(x) (((x)&0x03)<<2) + +#define EPORT_EPDDR_EPDD7(x) EPORT_EPPAR_EPPA7(x) +#define EPORT_EPDDR_EPDD6(x) EPORT_EPPAR_EPPA6(x) +#define EPORT_EPDDR_EPDD5(x) EPORT_EPPAR_EPPA5(x) +#define EPORT_EPDDR_EPDD4(x) EPORT_EPPAR_EPPA4(x) +#define EPORT_EPDDR_EPDD3(x) EPORT_EPPAR_EPPA3(x) +#define EPORT_EPDDR_EPDD2(x) EPORT_EPPAR_EPPA2(x) +#define EPORT_EPDDR_EPDD1(x) EPORT_EPPAR_EPPA1(x) + +#define EPORT_EPIER_EPIE7 (0x80) +#define EPORT_EPIER_EPIE6 (0x40) +#define EPORT_EPIER_EPIE5 (0x20) +#define EPORT_EPIER_EPIE4 (0x10) +#define EPORT_EPIER_EPIE3 (0x08) +#define EPORT_EPIER_EPIE2 (0x04) +#define EPORT_EPIER_EPIE1 (0x02) + +#define EPORT_EPDR_EPDR7 EPORT_EPIER_EPIE7 +#define EPORT_EPDR_EPDR6 EPORT_EPIER_EPIE6 +#define EPORT_EPDR_EPDR5 EPORT_EPIER_EPIE5 +#define EPORT_EPDR_EPDR4 EPORT_EPIER_EPIE4 +#define EPORT_EPDR_EPDR3 EPORT_EPIER_EPIE3 +#define EPORT_EPDR_EPDR2 EPORT_EPIER_EPIE2 +#define EPORT_EPDR_EPDR1 EPORT_EPIER_EPIE1 + +#define EPORT_EPPDR_EPPDR7 EPORT_EPIER_EPIE7 +#define EPORT_EPPDR_EPPDR6 EPORT_EPIER_EPIE6 +#define EPORT_EPPDR_EPPDR5 EPORT_EPIER_EPIE5 +#define EPORT_EPPDR_EPPDR4 EPORT_EPIER_EPIE4 +#define EPORT_EPPDR_EPPDR3 EPORT_EPIER_EPIE3 +#define EPORT_EPPDR_EPPDR2 EPORT_EPIER_EPIE2 +#define EPORT_EPPDR_EPPDR1 EPORT_EPIER_EPIE1 + +/********************************************************************* +* Watchdog Timer Modules (WTM) +*********************************************************************/ +/* Bit definitions and macros for WTM_WCR */ +#define WTM_WCR_WAIT (0x0008) +#define WTM_WCR_DOZE (0x0004) +#define WTM_WCR_HALTED (0x0002) +#define WTM_WCR_EN (0x0001) + +/********************************************************************* +* FlexCAN Module (CAN) +*********************************************************************/ +/* Bit definitions and macros for CAN_CANMCR */ +#define CANMCR_MDIS (0x80000000) +#define CANMCR_FRZ (0x40000000) +#define CANMCR_HALT (0x10000000) +#define CANMCR_NORDY (0x08000000) +#define CANMCR_SOFTRST (0x02000000) +#define CANMCR_FRZACK (0x01000000) +#define CANMCR_SUPV (0x00800000) +#define CANMCR_LPMACK (0x00100000) +#define CANMCR_MAXMB(x) (((x)&0x0F)) + +/* Bit definitions and macros for CAN_CANCTRL */ +#define CANCTRL_PRESDIV(x) (((x)&0xFF)<<24) +#define CANCTRL_RJW(x) (((x)&0x03)<<22) +#define CANCTRL_PSEG1(x) (((x)&0x07)<<19) +#define CANCTRL_PSEG2(x) (((x)&0x07)<<16) +#define CANCTRL_BOFFMSK (0x00008000) +#define CANCTRL_ERRMSK (0x00004000) +#define CANCTRL_CLKSRC (0x00002000) +#define CANCTRL_LPB (0x00001000) +#define CANCTRL_SMP (0x00000080) +#define CANCTRL_BOFFREC (0x00000040) +#define CANCTRL_TSYNC (0x00000020) +#define CANCTRL_LBUF (0x00000010) +#define CANCTRL_LOM (0x00000008) +#define CANCTRL_PROPSEG(x) (((x)&0x07)) + +/* Bit definitions and macros for CAN_TIMER */ +#define TIMER_TIMER(x) ((x)&0xFFFF) + +/* Bit definitions and macros for CAN_RXGMASK */ +#define RXGMASK_MI(x) ((x)&0x1FFFFFFF) + +/* Bit definitions and macros for CAN_ERRCNT */ +#define ERRCNT_TXECTR(x) (((x)&0xFF)) +#define ERRCNT_RXECTR(x) (((x)&0xFF)<<8) + +/* Bit definitions and macros for CAN_ERRSTAT */ +#define ERRSTAT_BITERR1 (0x00008000) +#define ERRSTAT_BITERR0 (0x00004000) +#define ERRSTAT_ACKERR (0x00002000) +#define ERRSTAT_CRCERR (0x00001000) +#define ERRSTAT_FRMERR (0x00000800) +#define ERRSTAT_STFERR (0x00000400) +#define ERRSTAT_TXWRN (0x00000200) +#define ERRSTAT_RXWRN (0x00000100) +#define ERRSTAT_IDLE (0x00000080) +#define ERRSTAT_TXRX (0x00000040) +#define ERRSTAT_FLT_BUSOFF (0x00000020) +#define ERRSTAT_FLT_PASSIVE (0x00000010) +#define ERRSTAT_FLT_ACTIVE (0x00000000) +#define ERRSTAT_BOFFINT (0x00000004) +#define ERRSTAT_ERRINT (0x00000002) + +/* Bit definitions and macros for CAN_IMASK */ +#define IMASK_BUF15M (0x00008000) +#define IMASK_BUF14M (0x00004000) +#define IMASK_BUF13M (0x00002000) +#define IMASK_BUF12M (0x00001000) +#define IMASK_BUF11M (0x00000800) +#define IMASK_BUF10M (0x00000400) +#define IMASK_BUF9M (0x00000200) +#define IMASK_BUF8M (0x00000100) +#define IMASK_BUF7M (0x00000080) +#define IMASK_BUF6M (0x00000040) +#define IMASK_BUF5M (0x00000020) +#define IMASK_BUF4M (0x00000010) +#define IMASK_BUF3M (0x00000008) +#define IMASK_BUF2M (0x00000004) +#define IMASK_BUF1M (0x00000002) +#define IMASK_BUF0M (0x00000001) + +/* Bit definitions and macros for CAN_IFLAG */ +#define IFLAG_BUF15I (0x00008000) +#define IFLAG_BUF14I (0x00004000) +#define IFLAG_BUF13I (0x00002000) +#define IFLAG_BUF12I (0x00001000) +#define IFLAG_BUF11I (0x00000800) +#define IFLAG_BUF10I (0x00000400) +#define IFLAG_BUF9I (0x00000200) +#define IFLAG_BUF8I (0x00000100) +#define IFLAG_BUF7I (0x00000080) +#define IFLAG_BUF6I (0x00000040) +#define IFLAG_BUF5I (0x00000020) +#define IFLAG_BUF4I (0x00000010) +#define IFLAG_BUF3I (0x00000008) +#define IFLAG_BUF2I (0x00000004) +#define IFLAG_BUF1I (0x00000002) +#define IFLAG_BUF0I (0x00000001) + +#endif /* mcf5235_h */ diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h new file mode 100644 index 00000000000..7f544c839fd --- /dev/null +++ b/include/configs/M5235EVB.h @@ -0,0 +1,261 @@ +/* + * Configuation settings for the Freescale MCF5329 FireEngine board. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef _M5235EVB_H +#define _M5235EVB_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_MCF523x /* define processor family */ +#define CONFIG_M5235 /* define processor type */ + +#undef DEBUG + +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } + +#undef CONFIG_WATCHDOG +#define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* Command line configuration */ +#include + +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO + +#undef CONFIG_CMD_LOADB +#undef CONFIG_CMD_LOADS + +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_MULTI 1 +# define CONFIG_MII 1 +# define CFG_DISCOVER_PHY +# define CFG_RX_ETH_BUFFER 8 +# define CFG_FAULT_ECHO_LINK_DOWN + +# define CFG_FEC0_PINMUX 0 +# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 +/* If CFG_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CFG_DISCOVER_PHY +# define FECDUPLEX FULL +# define FECSPEED _100BASET +# else +# ifndef CFG_FAULT_ECHO_LINK_DOWN +# define CFG_FAULT_ECHO_LINK_DOWN +# endif +# endif /* CFG_DISCOVER_PHY */ +#endif + +/* Timer */ +#define CONFIG_MCFTMR +#undef CONFIG_MCFPIT + +/* I2C */ +#define CONFIG_FSL_I2C +#define CONFIG_HARD_I2C /* I2C with hw support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 80000 +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_OFFSET 0x00000300 +#define CFG_IMMR CFG_MBAR + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ +#define CONFIG_BOOTFILE "u-boot.bin" +#ifdef CONFIG_MCFFEC +# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 +# define CONFIG_IPADDR 192.162.1.2 +# define CONFIG_NETMASK 255.255.255.0 +# define CONFIG_SERVERIP 192.162.1.1 +# define CONFIG_GATEWAYIP 192.162.1.1 +# define CONFIG_OVERWRITE_ETHADDR_ONCE +#endif /* FEC_ENET */ + +#define CONFIG_HOSTNAME M5235EVB +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "loadaddr=10000\0" \ + "u-boot=u-boot.bin\0" \ + "load=tftp ${loadaddr) ${u-boot}\0" \ + "upd=run load; run prog\0" \ + "prog=prot off ffe00000 ffe3ffff;" \ + "era ffe00000 ffe3ffff;" \ + "cp.b ${loadaddr} ffe00000 ${filesize};"\ + "save\0" \ + "" + +#define CONFIG_PRAM 512 /* 512 KB */ +#define CFG_PROMPT "-> " +#define CFG_LONGHELP /* undef to save memory */ + +#if defined(CONFIG_KGDB) +# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +# define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE+0x20000) + +#define CFG_HZ 1000 +#define CFG_CLK 75000000 +#define CFG_CPU_CLK CFG_CLK * 2 + +#define CFG_MBAR 0x40000000 + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR 0x20000000 +#define CFG_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */ +#define CFG_INIT_RAM_CTRL 0x21 +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE - 0x10) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ + +#define CFG_MEMTEST_START CFG_SDRAM_BASE + 0x400 +#define CFG_MEMTEST_END ((CFG_SDRAM_SIZE - 3) << 20) + +#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ + +#define CFG_BOOTPARAMS_LEN 64*1024 +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization ?? + */ +/* Initial Memory map for Linux */ +#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_FLASH_CFI +#ifdef CFG_FLASH_CFI +# define CFG_FLASH_CFI_DRIVER 1 +# define CFG_FLASH_SIZE 0x800000 /* Max size that the board might have */ +#ifdef NORFLASH_PS32BIT +# define CFG_FLASH_CFI_WIDTH FLASH_CFI_32BIT +#else +# define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT +#endif +# define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +# define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ +# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ +#endif + +#define CFG_FLASH_BASE (CFG_CS0_BASE << 16) + +/* Configuration for environment + * Environment is embedded in u-boot in the second sector of the flash + */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_IS_EMBEDDED 1 +#ifdef NORFLASH_PS32BIT +# define CFG_ENV_OFFSET (0x8000) +# define CFG_ENV_SIZE 0x4000 +# define CFG_ENV_SECT_SIZE 0x4000 +#else +# define CFG_ENV_OFFSET (0x4000) +# define CFG_ENV_SIZE 0x2000 +# define CFG_ENV_SECT_SIZE 0x2000 +#endif + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 + +/*----------------------------------------------------------------------- + * Chipselect bank definitions + */ +/* + * CS0 - NOR Flash 1, 2, 4, or 8MB + * CS1 - Available + * CS2 - Available + * CS3 - Available + * CS4 - Available + * CS5 - Available + * CS6 - Available + * CS7 - Available + */ +#ifdef NORFLASH_PS32BIT +# define CFG_CS0_BASE 0xFFC0 +# define CFG_CS0_MASK 0x003f0001 +# define CFG_CS0_CTRL 0x1D00 +#else +# define CFG_CS0_BASE 0xFFE0 +# define CFG_CS0_MASK 0x001f0001 +# define CFG_CS0_CTRL 0x1D80 +#endif + +#endif /* _M5329EVB_H */ -- cgit v1.3.1 From 8280f6a1c43247616b68224675188e5ccd124650 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Sat, 18 Aug 2007 14:33:02 +0200 Subject: Coding style cleanup Signed-off-by: Stefan Roese --- CREDITS | 56 +++++++++++++++++------------------ board/freescale/m5249evb/m5249evb.c | 1 - board/freescale/m5253evbe/m5253evbe.c | 1 - board/freescale/m54455evb/m54455evb.c | 1 - cpu/mcf523x/cpu_init.c | 30 +++++++++---------- cpu/mcf523x/speed.c | 3 +- cpu/mcf52x2/cpu_init.c | 2 +- doc/README.m5253evbe | 6 ++-- include/configs/M5249EVB.h | 1 - include/configs/M5253EVBE.h | 1 - lib_m68k/m68k_linux.c | 6 ++-- 11 files changed, 53 insertions(+), 55 deletions(-) (limited to 'include/configs') diff --git a/CREDITS b/CREDITS index 6e44db47085..0953e7b952a 100644 --- a/CREDITS +++ b/CREDITS @@ -147,6 +147,11 @@ N: Daniel Engstr E: daniel@omicron.se D: x86 port, Support for sc520_cdp board +N: Hayden Fraser +E: Hayden.Fraser@freescale.com +D: Support for ColdFire MCF5253 +W: www.freescale.com + N: Dr. Wolfgang Grandegger E: wg@denx.de D: Support for Interphase 4539 T1/E1/J1 PMC, PN62, CCM, SCM boards @@ -283,6 +288,11 @@ E: team@leox.org D: Support for LEOX boards, DS164x RTC W: http://www.leox.org +N: TsiChung Liew +E: Tsi-Chung.Liew@freescale.com +D: Support for ColdFire MCF523x, MCF532x, MCF5445x +W: www.freescale.com + N: Leif Lindholm E: leif.lindholm@i3micro.com D: Support for AMD dbau1550 board. @@ -297,6 +307,11 @@ N: Raymond Lo E: lo@routefree.com D: Support for DOS partitions +N: James MacAulay +E: james.macaulay@amirix.com +D: Suppport for Amirix AP1000 +W: www.amirix.com + N: Dan Malek E: dan@embeddedalley.com D: FADSROM, the grandfather of all of this @@ -372,8 +387,9 @@ D: Support for the Wind River sbc405, sbc8240 board W: http://www.windriver.com N: Stefan Roese -E: stefan.roese@esd-electronics.com -D: AMCC PPC401/403/405GP Support; Windows environment support +E: sr@denx.de +D: AMCC PPC4xx Support +W: http://www.denx.de N: Erwin Rol E: erwin@muffin.org @@ -407,6 +423,11 @@ N: Art Shipkowski E: art@videon-central.com D: Support for NetSilicon NS7520 +N: Michal Simek +E: monstr@monstr.eu +D: Support for Microblaze, ML401, XUPV2P board +W: www.monstr.eu + N: Yasushi Shoji E: yashi@atmark-techno.com D: Support for Xilinx MicroBlaze, for Atmark Techno SUZAKU FPGA board @@ -420,6 +441,11 @@ E: andrea.scian@dave-tech.it D: Port to B2 board W: www.dave-tech.it +N: Timur Tabi +E: timur@freescale.com +D: Support for MPC8349E-mITX +W: www.freescale.com + N: Rob Taylor E: robt@flyingpig.com D: Port to MBX860T and Sandpoint8240 @@ -473,29 +499,3 @@ N: Alex Zuepke E: azu@sysgo.de D: Overall improvements on StrongARM, ARM720TDMI; Support for Tuxscreen; initial PCMCIA support for ARM W: www.elinos.com - -N: James MacAulay -E: james.macaulay@amirix.com -D: Suppport for Amirix AP1000 -W: www.amirix.com - -N: Timur Tabi -E: timur@freescale.com -D: Support for MPC8349E-mITX -W: www.freescale.com - -N: Michal Simek -E: monstr@monstr.eu -D: Support for Microblaze, ML401, XUPV2P board -W: www.monstr.eu - -N: TsiChung Liew -E: Tsi-Chung.Liew@freescale.com -D: Support for ColdFire MCF523x, MCF532x, MCF5445x -W: www.freescale.com - -N: Hayden Fraser -E: Hayden.Fraser@freescale.com -D: Support for ColdFire MCF5253 -W: www.freescale.com - diff --git a/board/freescale/m5249evb/m5249evb.c b/board/freescale/m5249evb/m5249evb.c index b0bf4139429..e8f621ba3f3 100644 --- a/board/freescale/m5249evb/m5249evb.c +++ b/board/freescale/m5249evb/m5249evb.c @@ -111,4 +111,3 @@ int testdram (void) { return (0); } - diff --git a/board/freescale/m5253evbe/m5253evbe.c b/board/freescale/m5253evbe/m5253evbe.c index 67fab5b0209..43aa84de227 100644 --- a/board/freescale/m5253evbe/m5253evbe.c +++ b/board/freescale/m5253evbe/m5253evbe.c @@ -130,4 +130,3 @@ void ide_set_reset(int idereset) } } #endif /* CONFIG_CMD_IDE */ - diff --git a/board/freescale/m54455evb/m54455evb.c b/board/freescale/m54455evb/m54455evb.c index 1411a1a4c2d..6a0278252fa 100644 --- a/board/freescale/m54455evb/m54455evb.c +++ b/board/freescale/m54455evb/m54455evb.c @@ -162,4 +162,3 @@ void pci_init_board(void) pci_mcf5445x_init(&hose); } #endif /* CONFIG_PCI */ - diff --git a/cpu/mcf523x/cpu_init.c b/cpu/mcf523x/cpu_init.c index a31054d9ad3..55c9cd356d1 100644 --- a/cpu/mcf523x/cpu_init.c +++ b/cpu/mcf523x/cpu_init.c @@ -127,19 +127,19 @@ int cpu_init_r(void) void uart_port_conf(void) { - volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; - - /* Setup Ports: */ - switch (CFG_UART_PORT) { - case 0: - gpio->par_uart = (GPIO_PAR_UART_U0RXD | GPIO_PAR_UART_U0TXD); - break; - case 1: - gpio->par_uart = - (GPIO_PAR_UART_U1RXD_U1RXD | GPIO_PAR_UART_U1TXD_U1TXD); - break; - case 2: - gpio->par_timer = (GPIO_PAR_UART_U2RXD | GPIO_PAR_UART_U2TXD); - break; - } + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + /* Setup Ports: */ + switch (CFG_UART_PORT) { + case 0: + gpio->par_uart = (GPIO_PAR_UART_U0RXD | GPIO_PAR_UART_U0TXD); + break; + case 1: + gpio->par_uart = + (GPIO_PAR_UART_U1RXD_U1RXD | GPIO_PAR_UART_U1TXD_U1TXD); + break; + case 2: + gpio->par_timer = (GPIO_PAR_UART_U2RXD | GPIO_PAR_UART_U2TXD); + break; + } } diff --git a/cpu/mcf523x/speed.c b/cpu/mcf523x/speed.c index 509109d0ed0..247d3188bb2 100644 --- a/cpu/mcf523x/speed.c +++ b/cpu/mcf523x/speed.c @@ -41,8 +41,9 @@ int get_clocks(void) pll->syncr = PLL_SYNCR_MFD(1); while (!(pll->synsr & PLL_SYNSR_LOCK)); - + gd->bus_clk = CFG_CLK; gd->cpu_clk = (gd->bus_clk * 2); + return (0); } diff --git a/cpu/mcf52x2/cpu_init.c b/cpu/mcf52x2/cpu_init.c index f41d77bc599..458b85ef144 100644 --- a/cpu/mcf52x2/cpu_init.c +++ b/cpu/mcf52x2/cpu_init.c @@ -63,7 +63,7 @@ void cpu_init_f(void) mbar2_writeByte(MCFSIM_INTBASE, 0x40); /* Base interrupts at 64 */ mbar2_writeByte(MCFSIM_SPURVEC, 0x00); - /*mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020); *//* Enable a 1 cycle pre-drive cycle on CS1 */ + /*mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020); */ /* Enable a 1 cycle pre-drive cycle on CS1 */ /* * Setup chip selects... diff --git a/doc/README.m5253evbe b/doc/README.m5253evbe index 7f2afcf156b..0426cb1d4ed 100644 --- a/doc/README.m5253evbe +++ b/doc/README.m5253evbe @@ -18,14 +18,14 @@ Created 06/05/2007 SDR: 0x00000000-0x00ffffff SRAM0: 0x20010000-0x20017fff SRAM1: 0x20000000-0x2000ffff - MBAR1: 0x10000000-0x4fffffff + MBAR1: 0x10000000-0x4fffffff MBAR2: 0x80000000-0xCfffffff - Flash: 0xffe00000-0xffffffff + Flash: 0xffe00000-0xffffffff 3. DEFINITIONS AND COMPILATION ============================== 3.1 Explanation on NEW definitions in include/configs/M5253EVBE.h - CONFIG_MCF52x2 Processor family + CONFIG_MCF52x2 Processor family CONFIG_MCF5253 MCF5253 specific CONFIG_M5253EVBE Amadeus Plus board specific CFG_CLK Define Amadeus Plus CPU Clock diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h index b300b68bcfa..de7ea42930f 100644 --- a/include/configs/M5249EVB.h +++ b/include/configs/M5249EVB.h @@ -192,4 +192,3 @@ #define CFG_GPIO1_LED 0x00400000 /* user led */ #endif /* M5249 */ - diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h index 9ad74e2bc67..48170e7a35a 100644 --- a/include/configs/M5253EVBE.h +++ b/include/configs/M5253EVBE.h @@ -210,4 +210,3 @@ #define CFG_GPIO1_LED 0x00400000 /* user led */ #endif /* _M5253EVB_H */ - diff --git a/lib_m68k/m68k_linux.c b/lib_m68k/m68k_linux.c index fde1744e45c..bea97441b14 100644 --- a/lib_m68k/m68k_linux.c +++ b/lib_m68k/m68k_linux.c @@ -92,7 +92,8 @@ void do_bootm_linux(cmd_tbl_t * cmdtp, int flag, */ asm("movel %%a7, %%d0\n" "movel %%d0, %0\n": "=d"(sp): :"%d0"); - debug("## Current stack ends at 0x%08lX ", sp); + + debug("## Current stack ends at 0x%08lX ", sp); sp -= 2048; /* just to be sure */ if (sp > CFG_BOOTMAPSZ) @@ -269,7 +270,8 @@ void do_bootm_linux(cmd_tbl_t * cmdtp, int flag, */ asm("movel %%a7, %%d0\n" "movel %%d0, %0\n": "=d"(nsp): :"%d0"); - nsp -= 2048; /* just to be sure */ + + nsp -= 2048; /* just to be sure */ nsp &= ~0xF; if (nsp > initrd_high) /* limit as specified */ -- cgit v1.3.1 From 26667b7fa05a8bf2fc65fb9f3230b02b1a10c367 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Sat, 18 Aug 2007 14:37:52 +0200 Subject: ColdFire: Fix some remaining problems with CFG_CMD_ Signed-off-by: Stefan Roese --- common/cmd_bdinfo.c | 4 ++-- doc/README.m54455evb | 2 +- include/configs/idmr.h | 6 +++--- 3 files changed, 6 insertions(+), 6 deletions(-) (limited to 'include/configs') diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index 7686080f351..ef15a006cd1 100644 --- a/common/cmd_bdinfo.c +++ b/common/cmd_bdinfo.c @@ -237,7 +237,7 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) print_str ("inpfreq", strmhz(buf, bd->bi_inpfreq)); print_str ("vcofreq", strmhz(buf, bd->bi_vcofreq)); #endif -#if defined(CFG_CMD_NET) +#if defined(CONFIG_CMD_NET) puts ("ethaddr ="); for (i=0; i<6; ++i) { printf ("%c%02X", i ? ':' : ' ', bd->bi_enetaddr[i]); @@ -266,7 +266,7 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) puts ("\nip_addr = "); print_IPaddr (bd->bi_ip_addr); -#endif /* CONFIG_CMD_NET */ +#endif printf ("\nbaudrate = %d bps\n", bd->bi_baudrate); return 0; diff --git a/doc/README.m54455evb b/doc/README.m54455evb index c768fc8a409..119a19d8971 100644 --- a/doc/README.m54455evb +++ b/doc/README.m54455evb @@ -78,7 +78,7 @@ CONFIG_MCFRTC -- define to use common CF RTC driver CFG_MCFRTC_BASE -- provide base address for RTC in immap.h CFG_RTC_OSCILLATOR -- define RTC clock frequency RTC_DEBUG -- define to show RTC debug message -CFG_CMD_DATE -- enable to use date feature in u-boot +CONFIG_CMD_DATE -- enable to use date feature in u-boot CONFIG_MCFFEC -- define to use common CF FEC driver CONFIG_NET_MULTI -- define to use multi FEC in u-boot diff --git a/include/configs/idmr.h b/include/configs/idmr.h index 3ec4a79440f..404e88a4fcd 100644 --- a/include/configs/idmr.h +++ b/include/configs/idmr.h @@ -235,8 +235,8 @@ "2m(rootfs)," \ "-(user)"; -#if (CONFIG_COMMANDS & CFG_CMD_MII) -#error MII commands don't work on iDMR board and sholud not be enabled. -#endif /* (CONFIG_COMMANDS & CFG_CMD_MII) */ +#if defined(CONFIG_CMD_MII) +#error "MII commands don't work on iDMR board and should not be enabled." +#endif #endif /* _IDMR_H */ -- cgit v1.3.1 From 79f240f7ecc0506b43ac50d1ea405ff6540d4d57 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Thu, 16 Aug 2007 22:52:39 -0500 Subject: lib_ppc: make board_add_ram_info weak platforms wishing to display RAM diagnostics in addition to size, can do so, on one line, in their own board_add_ram_info() implementation. this consequently eliminates CONFIG_ADD_RAM_INFO. Thanks to Stefan for the hint. Signed-off-by: Kim Phillips --- board/lwmon5/sdram.c | 2 -- board/netstal/hcu5/sdram.c | 2 -- cpu/ppc4xx/44x_spd_ddr2.c | 2 -- include/configs/TQM85xx.h | 1 - include/configs/hcu5.h | 1 - include/configs/katmai.h | 1 - include/configs/luan.h | 1 - include/configs/lwmon5.h | 1 - include/configs/p3mx.h | 1 - include/configs/yucca.h | 1 - lib_ppc/board.c | 11 ++++++----- 11 files changed, 6 insertions(+), 18 deletions(-) (limited to 'include/configs') diff --git a/board/lwmon5/sdram.c b/board/lwmon5/sdram.c index f906b859a31..d4547e24cf1 100644 --- a/board/lwmon5/sdram.c +++ b/board/lwmon5/sdram.c @@ -57,7 +57,6 @@ void dcbz_area(u32 start_address, u32 num_bytes); void dflush(void); -#ifdef CONFIG_ADD_RAM_INFO static u32 is_ecc_enabled(void) { u32 val; @@ -87,7 +86,6 @@ void board_add_ram_info(int use_default) val = DDR0_03_CASLAT_DECODE(val); printf(", CL%d)", val); } -#endif static int wait_for_dlllock(void) { diff --git a/board/netstal/hcu5/sdram.c b/board/netstal/hcu5/sdram.c index 40391958d21..c5be8b9258d 100644 --- a/board/netstal/hcu5/sdram.c +++ b/board/netstal/hcu5/sdram.c @@ -70,7 +70,6 @@ void dflush(void); void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value); -#ifdef CONFIG_ADD_RAM_INFO void board_add_ram_info(int use_default) { PPC440_SYS_INFO board_cfg; @@ -99,7 +98,6 @@ void board_add_ram_info(int use_default) val = DDR0_03_CASLAT_DECODE(val); printf(", CL%d)", val); } -#endif /*-------------------------------------------------------------------- * wait_for_dlllock. diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c index 18b90ba5ac6..67ba5bdef24 100644 --- a/cpu/ppc4xx/44x_spd_ddr2.c +++ b/cpu/ppc4xx/44x_spd_ddr2.c @@ -621,7 +621,6 @@ static void get_spd_info(unsigned long *dimm_populated, } } -#ifdef CONFIG_ADD_RAM_INFO void board_add_ram_info(int use_default) { PPC440_SYS_INFO board_cfg; @@ -642,7 +641,6 @@ void board_add_ram_info(int use_default) val = (val & SDRAM_MMODE_DCL_MASK) >> 4; printf(", CL%d)", val); } -#endif /*------------------------------------------------------------------ * For the memory DIMMs installed, this routine verifies that they diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index cb9bf549295..9beb0bacf8b 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -94,7 +94,6 @@ */ #define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */ #define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE -#define CONFIG_ADD_RAM_INFO 1 /* print additional info*/ #if defined(CONFIG_TQM8540) || defined(CONFIG_TQM8560) /* TQM8540 & 8560 need DLL-override */ diff --git a/include/configs/hcu5.h b/include/configs/hcu5.h index d0bf2516edc..f95d78ec167 100644 --- a/include/configs/hcu5.h +++ b/include/configs/hcu5.h @@ -43,7 +43,6 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ -#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the diff --git a/include/configs/katmai.h b/include/configs/katmai.h index 110ad44ee1b..b6d0f519a82 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -42,7 +42,6 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ -#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ #undef CONFIG_SHOW_BOOT_PROGRESS /*----------------------------------------------------------------------- diff --git a/include/configs/luan.h b/include/configs/luan.h index 26dbec92e97..a09dd74733e 100644 --- a/include/configs/luan.h +++ b/include/configs/luan.h @@ -39,7 +39,6 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ -#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 604b7d12f83..7116c49c772 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -35,7 +35,6 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ -#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the diff --git a/include/configs/p3mx.h b/include/configs/p3mx.h index 8ae38cb2775..bec442d9839 100644 --- a/include/configs/p3mx.h +++ b/include/configs/p3mx.h @@ -60,7 +60,6 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_BOARD_EARLY_INIT_R 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r() */ -#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the diff --git a/include/configs/yucca.h b/include/configs/yucca.h index 9c536fd12da..906f046fa7a 100644 --- a/include/configs/yucca.h +++ b/include/configs/yucca.h @@ -46,7 +46,6 @@ #define EXTCLK_83 83333333 #define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ -#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ #undef CONFIG_SHOW_BOOT_PROGRESS #undef CONFIG_STRESS diff --git a/lib_ppc/board.c b/lib_ppc/board.c index c87d46c3d62..9aa67f93c0f 100644 --- a/lib_ppc/board.c +++ b/lib_ppc/board.c @@ -209,9 +209,12 @@ static int init_baudrate (void) /***********************************************************************/ -#ifdef CONFIG_ADD_RAM_INFO -void board_add_ram_info(int); -#endif +void __board_add_ram_info(int use_default) +{ + /* please define platform specific board_add_ram_info() */ +} +void board_add_ram_info(int) __attribute__((weak, alias("__board_add_ram_info"))); + static int init_func_ram (void) { @@ -224,9 +227,7 @@ static int init_func_ram (void) if ((gd->ram_size = initdram (board_type)) > 0) { print_size (gd->ram_size, ""); -#ifdef CONFIG_ADD_RAM_INFO board_add_ram_info(0); -#endif putc('\n'); return (0); } -- cgit v1.3.1 From 3ad63878737a5a2b1e60825bf0a7d601d7a695e7 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 21 Aug 2007 16:27:57 +0200 Subject: ppc4xx: Add matrix kbd support to lwmon5 board (440EPx based) This patch adds support for the matrix keyboard on the lwmon5 board. Since the implementation in the dsPCI is kind of compatible with the "old" lwmon board, most of the code is copied from the lwmon board directory. Signed-off-by: Stefan Roese --- board/lwmon5/Makefile | 2 +- board/lwmon5/kbd.c | 458 ++++++++++++++++++++++++++++++++++++++++++ board/lwmon5/lwmon5.c | 19 +- include/asm-ppc/global_data.h | 2 +- include/configs/lwmon5.h | 14 +- 5 files changed, 478 insertions(+), 17 deletions(-) create mode 100644 board/lwmon5/kbd.c (limited to 'include/configs') diff --git a/board/lwmon5/Makefile b/board/lwmon5/Makefile index 06ef7f93317..2a9357146c5 100644 --- a/board/lwmon5/Makefile +++ b/board/lwmon5/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o sdram.o +COBJS = $(BOARD).o kbd.o sdram.o SOBJS = init.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/board/lwmon5/kbd.c b/board/lwmon5/kbd.c new file mode 100644 index 00000000000..1e5349a6ecc --- /dev/null +++ b/board/lwmon5/kbd.c @@ -0,0 +1,458 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * (C) Copyright 2001, 2002 + * DENX Software Engineering + * Wolfgang Denk, wd@denx.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* define DEBUG for debugging output (obviously ;-)) */ +#if 0 +#define DEBUG +#endif + +#include +#include +#include +#include +#include +#include + +#include +#include /* for strdup */ + +DECLARE_GLOBAL_DATA_PTR; + +static void kbd_init (void); +static int compare_magic (uchar *kbd_data, uchar *str); + +/*--------------------- Local macros and constants --------------------*/ +#define _NOT_USED_ 0xFFFFFFFF + +/*------------------------- Keyboard controller -----------------------*/ +/* command codes */ +#define KEYBD_CMD_READ_KEYS 0x01 +#define KEYBD_CMD_READ_VERSION 0x02 +#define KEYBD_CMD_READ_STATUS 0x03 +#define KEYBD_CMD_RESET_ERRORS 0x10 + +/* status codes */ +#define KEYBD_STATUS_MASK 0x3F +#define KEYBD_STATUS_H_RESET 0x20 +#define KEYBD_STATUS_BROWNOUT 0x10 +#define KEYBD_STATUS_WD_RESET 0x08 +#define KEYBD_STATUS_OVERLOAD 0x04 +#define KEYBD_STATUS_ILLEGAL_WR 0x02 +#define KEYBD_STATUS_ILLEGAL_RD 0x01 + +/* Number of bytes returned from Keyboard Controller */ +#define KEYBD_VERSIONLEN 2 /* version information */ + +/* + * This is different from the "old" lwmon dsPIC kbd controller + * implementation. Now the controller still answers with 9 bytes, + * but the last 3 bytes are always "0x06 0x07 0x08". So we just + * set the length to compare to 6 instead of 9. + */ +#define KEYBD_DATALEN 6 /* normal key scan data */ + +/* maximum number of "magic" key codes that can be assigned */ + +static uchar kbd_addr = CFG_I2C_KEYBD_ADDR; + +static uchar *key_match (uchar *); + +#define KEYBD_SET_DEBUGMODE '#' /* Magic key to enable debug output */ + +/*********************************************************************** +F* Function: int board_postclk_init (void) P*A*Z* + * +P* Parameters: none +P* +P* Returnvalue: int +P* - 0 is always returned. + * +Z* Intention: This function is the board_postclk_init() method implementation +Z* for the lwmon board. + * + ***********************************************************************/ +int board_postclk_init (void) +{ + kbd_init(); + + return (0); +} + +static void kbd_init (void) +{ + uchar kbd_data[KEYBD_DATALEN]; + uchar tmp_data[KEYBD_DATALEN]; + uchar val, errcd; + int i; + + i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE); + + gd->kbd_status = 0; + + /* Forced by PIC. Delays <= 175us loose */ + udelay(1000); + + /* Read initial keyboard error code */ + val = KEYBD_CMD_READ_STATUS; + i2c_write (kbd_addr, 0, 0, &val, 1); + i2c_read (kbd_addr, 0, 0, &errcd, 1); + /* clear unused bits */ + errcd &= KEYBD_STATUS_MASK; + /* clear "irrelevant" bits. Recommended by Martin Rajek, LWN */ + errcd &= ~(KEYBD_STATUS_H_RESET|KEYBD_STATUS_BROWNOUT); + if (errcd) { + gd->kbd_status |= errcd << 8; + } + /* Reset error code and verify */ + val = KEYBD_CMD_RESET_ERRORS; + i2c_write (kbd_addr, 0, 0, &val, 1); + udelay(1000); /* delay NEEDED by keyboard PIC !!! */ + + val = KEYBD_CMD_READ_STATUS; + i2c_write (kbd_addr, 0, 0, &val, 1); + i2c_read (kbd_addr, 0, 0, &val, 1); + + val &= KEYBD_STATUS_MASK; /* clear unused bits */ + if (val) { /* permanent error, report it */ + gd->kbd_status |= val; + return; + } + + /* + * Read current keyboard state. + * + * After the error reset it may take some time before the + * keyboard PIC picks up a valid keyboard scan - the total + * scan time is approx. 1.6 ms (information by Martin Rajek, + * 28 Sep 2002). We read a couple of times for the keyboard + * to stabilize, using a big enough delay. + * 10 times should be enough. If the data is still changing, + * we use what we get :-( + */ + + memset (tmp_data, 0xFF, KEYBD_DATALEN); /* impossible value */ + for (i=0; i<10; ++i) { + val = KEYBD_CMD_READ_KEYS; + i2c_write (kbd_addr, 0, 0, &val, 1); + i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN); + + if (memcmp(kbd_data, tmp_data, KEYBD_DATALEN) == 0) { + /* consistent state, done */ + break; + } + /* remeber last state, delay, and retry */ + memcpy (tmp_data, kbd_data, KEYBD_DATALEN); + udelay (5000); + } +} + +/*********************************************************************** +F* Function: int misc_init_r (void) P*A*Z* + * +P* Parameters: none +P* +P* Returnvalue: int +P* - 0 is always returned, even in the case of a keyboard +P* error. + * +Z* Intention: This function is the misc_init_r() method implementation +Z* for the lwmon board. +Z* The keyboard controller is initialized and the result +Z* of a read copied to the environment variable "keybd". +Z* If KEYBD_SET_DEBUGMODE is defined, a check is made for +Z* this key, and if found display to the LCD will be enabled. +Z* The keys in "keybd" are checked against the magic +Z* keycommands defined in the environment. +Z* See also key_match(). + * +D* Design: wd@denx.de +C* Coding: wd@denx.de +V* Verification: dzu@denx.de + ***********************************************************************/ +int misc_init_r_kbd (void) +{ + uchar kbd_data[KEYBD_DATALEN]; + char keybd_env[2 * KEYBD_DATALEN + 1]; + uchar kbd_init_status = gd->kbd_status >> 8; + uchar kbd_status = gd->kbd_status; + uchar val; + char *str; + int i; + + if (kbd_init_status) { + printf ("KEYBD: Error %02X\n", kbd_init_status); + } + if (kbd_status) { /* permanent error, report it */ + printf ("*** Keyboard error code %02X ***\n", kbd_status); + sprintf (keybd_env, "%02X", kbd_status); + setenv ("keybd", keybd_env); + return 0; + } + + /* + * Now we know that we have a working keyboard, so disable + * all output to the LCD except when a key press is detected. + */ + + if ((console_assign (stdout, "serial") < 0) || + (console_assign (stderr, "serial") < 0)) { + printf ("Can't assign serial port as output device\n"); + } + + /* Read Version */ + val = KEYBD_CMD_READ_VERSION; + i2c_write (kbd_addr, 0, 0, &val, 1); + i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_VERSIONLEN); + printf ("KEYBD: Version %d.%d\n", kbd_data[0], kbd_data[1]); + + /* Read current keyboard state */ + val = KEYBD_CMD_READ_KEYS; + i2c_write (kbd_addr, 0, 0, &val, 1); + i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN); + + for (i = 0; i < KEYBD_DATALEN; ++i) { + sprintf (keybd_env + i + i, "%02X", kbd_data[i]); + } + setenv ("keybd", keybd_env); + + str = strdup ((char *)key_match (kbd_data)); /* decode keys */ +#ifdef KEYBD_SET_DEBUGMODE + if (kbd_data[0] == KEYBD_SET_DEBUGMODE) { /* set debug mode */ + if ((console_assign (stdout, "lcd") < 0) || + (console_assign (stderr, "lcd") < 0)) { + printf ("Can't assign LCD display as output device\n"); + } + } +#endif /* KEYBD_SET_DEBUGMODE */ +#ifdef CONFIG_PREBOOT /* automatically configure "preboot" command on key match */ + setenv ("preboot", str); /* set or delete definition */ +#endif /* CONFIG_PREBOOT */ + if (str != NULL) { + free (str); + } + return (0); +} + +#ifdef CONFIG_PREBOOT + +static uchar kbd_magic_prefix[] = "key_magic"; +static uchar kbd_command_prefix[] = "key_cmd"; + +static int compare_magic (uchar *kbd_data, uchar *str) +{ + uchar compare[KEYBD_DATALEN-1]; + char *nxt; + int i; + + /* Don't include modifier byte */ + memcpy (compare, kbd_data+1, KEYBD_DATALEN-1); + + for (; str != NULL; str = (*nxt) ? (uchar *)(nxt+1) : (uchar *)nxt) { + uchar c; + int k; + + c = (uchar) simple_strtoul ((char *)str, (char **) (&nxt), 16); + + if (str == (uchar *)nxt) { /* invalid character */ + break; + } + + /* + * Check if this key matches the input. + * Set matches to zero, so they match only once + * and we can find duplicates or extra keys + */ + for (k = 0; k < sizeof(compare); ++k) { + if (compare[k] == '\0') /* only non-zero entries */ + continue; + if (c == compare[k]) { /* found matching key */ + compare[k] = '\0'; + break; + } + } + if (k == sizeof(compare)) { + return -1; /* unmatched key */ + } + } + + /* + * A full match leaves no keys in the `compare' array, + */ + for (i = 0; i < sizeof(compare); ++i) { + if (compare[i]) + { + return -1; + } + } + + return 0; +} + +/*********************************************************************** +F* Function: static uchar *key_match (uchar *kbd_data) P*A*Z* + * +P* Parameters: uchar *kbd_data +P* - The keys to match against our magic definitions +P* +P* Returnvalue: uchar * +P* - != NULL: Pointer to the corresponding command(s) +P* NULL: No magic is about to happen + * +Z* Intention: Check if pressed key(s) match magic sequence, +Z* and return the command string associated with that key(s). +Z* +Z* If no key press was decoded, NULL is returned. +Z* +Z* Note: the first character of the argument will be +Z* overwritten with the "magic charcter code" of the +Z* decoded key(s), or '\0'. +Z* +Z* Note: the string points to static environment data +Z* and must be saved before you call any function that +Z* modifies the environment. + * +D* Design: wd@denx.de +C* Coding: wd@denx.de +V* Verification: dzu@denx.de + ***********************************************************************/ +static uchar *key_match (uchar *kbd_data) +{ + char magic[sizeof (kbd_magic_prefix) + 1]; + uchar *suffix; + char *kbd_magic_keys; + + /* + * The following string defines the characters that can pe appended + * to "key_magic" to form the names of environment variables that + * hold "magic" key codes, i. e. such key codes that can cause + * pre-boot actions. If the string is empty (""), then only + * "key_magic" is checked (old behaviour); the string "125" causes + * checks for "key_magic1", "key_magic2" and "key_magic5", etc. + */ + if ((kbd_magic_keys = getenv ("magic_keys")) == NULL) + kbd_magic_keys = ""; + + /* loop over all magic keys; + * use '\0' suffix in case of empty string + */ + for (suffix=(uchar *)kbd_magic_keys; *suffix || suffix==(uchar *)kbd_magic_keys; ++suffix) { + sprintf (magic, "%s%c", kbd_magic_prefix, *suffix); + debug ("### Check magic \"%s\"\n", magic); + if (compare_magic(kbd_data, (uchar *)getenv(magic)) == 0) { + char cmd_name[sizeof (kbd_command_prefix) + 1]; + char *cmd; + + sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix); + + cmd = getenv (cmd_name); + debug ("### Set PREBOOT to $(%s): \"%s\"\n", + cmd_name, cmd ? cmd : "<>"); + *kbd_data = *suffix; + return ((uchar *)cmd); + } + } + debug ("### Delete PREBOOT\n"); + *kbd_data = '\0'; + return (NULL); +} +#endif /* CONFIG_PREBOOT */ + +/*********************************************************************** +F* Function: int do_kbd (cmd_tbl_t *cmdtp, int flag, +F* int argc, char *argv[]) P*A*Z* + * +P* Parameters: cmd_tbl_t *cmdtp +P* - Pointer to our command table entry +P* int flag +P* - If the CMD_FLAG_REPEAT bit is set, then this call is +P* a repetition +P* int argc +P* - Argument count +P* char *argv[] +P* - Array of the actual arguments +P* +P* Returnvalue: int +P* - 0 is always returned. + * +Z* Intention: Implement the "kbd" command. +Z* The keyboard status is read. The result is printed on +Z* the console and written into the "keybd" environment +Z* variable. + * +D* Design: wd@denx.de +C* Coding: wd@denx.de +V* Verification: dzu@denx.de + ***********************************************************************/ +int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + uchar kbd_data[KEYBD_DATALEN]; + char keybd_env[2 * KEYBD_DATALEN + 1]; + uchar val; + int i; + +#if 0 /* Done in kbd_init */ + i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE); +#endif + + /* Read keys */ + val = KEYBD_CMD_READ_KEYS; + i2c_write (kbd_addr, 0, 0, &val, 1); + i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN); + + puts ("Keys:"); + for (i = 0; i < KEYBD_DATALEN; ++i) { + sprintf (keybd_env + i + i, "%02X", kbd_data[i]); + printf (" %02x", kbd_data[i]); + } + putc ('\n'); + setenv ("keybd", keybd_env); + return 0; +} + +U_BOOT_CMD( + kbd, 1, 1, do_kbd, + "kbd - read keyboard status\n", + NULL +); + +/*----------------------------- Utilities -----------------------------*/ + +#ifdef CONFIG_POST +/* + * Returns 1 if keys pressed to start the power-on long-running tests + * Called from board_init_f(). + */ +int post_hotkeys_pressed(void) +{ + uchar kbd_data[KEYBD_DATALEN]; + uchar val; + + /* Read keys */ + val = KEYBD_CMD_READ_KEYS; + i2c_write (kbd_addr, 0, 0, &val, 1); + i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN); + + return (compare_magic(kbd_data, (uchar *)CONFIG_POST_KEY_MAGIC) == 0); +} +#endif diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c index 830ec1911f6..0958194ecaa 100644 --- a/board/lwmon5/lwmon5.c +++ b/board/lwmon5/lwmon5.c @@ -28,7 +28,8 @@ DECLARE_GLOBAL_DATA_PTR; extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ -ulong flash_get_size (ulong base, int banknum); +ulong flash_get_size(ulong base, int banknum); +int misc_init_r_kbd(void); int board_early_init_f(void) { @@ -295,6 +296,11 @@ int misc_init_r(void) out_be32((void *)0xc4000024, 0x64); out_be32((void *)0xc4000020, 0x701); + /* + * Init matrix keyboard + */ + misc_init_r_kbd(); + return 0; } @@ -521,14 +527,3 @@ void hw_watchdog_reset(void) val = gpio_read_out_bit(CFG_GPIO_WATCHDOG) == 0 ? 1 : 0; gpio_write_bit(CFG_GPIO_WATCHDOG, val); } - -#ifdef CONFIG_POST -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - return (ctrlc()); -} -#endif diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h index cd2463643ce..a35013d568f 100644 --- a/include/asm-ppc/global_data.h +++ b/include/asm-ppc/global_data.h @@ -129,7 +129,7 @@ typedef struct global_data { unsigned long do_mdm_init; unsigned long be_quiet; #endif -#ifdef CONFIG_LWMON +#if defined(CONFIG_LWMON) || defined(CONFIG_LWMON5) unsigned long kbd_status; #endif void **jt; /* jump table */ diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 5ebe4404d92..14a200d3e44 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -34,6 +34,7 @@ #define CONFIG_SYS_CLK_FREQ 33300000 /* external freq to pll */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#define CONFIG_BOARD_POSTCLK_INIT 1 /* Call board_postclk_init */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ #define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ @@ -159,10 +160,16 @@ #define CONFIG_RTC_PCF8563 1 /* enable Philips PCF8563 RTC */ #define CFG_I2C_RTC_ADDR 0x51 /* Philips PCF8563 RTC address */ +#define CFG_I2C_KEYBD_ADDR 0x56 /* PIC LWE keyboard */ -#define CONFIG_PREBOOT "echo;" \ - "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ - "echo" +#define CONFIG_POST_KEY_MAGIC "3C+3E" /* press F3 + F5 keys to force POST */ +#if 0 +#define CONFIG_AUTOBOOT_KEYED /* Enable "password" protection */ +#define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d sec...\n" +#define CONFIG_AUTOBOOT_DELAY_STR " " /* "password" */ +#endif + +#define CONFIG_PREBOOT "setenv bootdelay 15" #undef CONFIG_BOOTARGS @@ -210,6 +217,7 @@ #define CONFIG_PHY_ADDR 3 /* PHY address, See schematics */ #define CONFIG_PHY_RESET 1 /* reset phy upon startup */ +#define CONFIG_PHY_RESET_DELAY 300 #define CONFIG_HAS_ETH0 #define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ -- cgit v1.3.1 From c64fb30e4c5976007d56fc1789c7a0666082b536 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Wed, 22 Aug 2007 08:56:09 +0200 Subject: ppc4xx: Remove unused option CFG_INIT_RAM_OCM Signed-off-by: Stefan Roese --- include/configs/hcu5.h | 1 - include/configs/lwmon5.h | 1 - 2 files changed, 2 deletions(-) (limited to 'include/configs') diff --git a/include/configs/hcu5.h b/include/configs/hcu5.h index f95d78ec167..90858819b67 100644 --- a/include/configs/hcu5.h +++ b/include/configs/hcu5.h @@ -73,7 +73,6 @@ * Initial RAM & stack pointer *----------------------------------------------------------------------*/ /* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */ -#define CFG_INIT_RAM_OCM 1 /* OCM as init ram */ #define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */ #define CFG_INIT_RAM_END (4 << 10) diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index cf8ff452086..23b19ba89ac 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -72,7 +72,6 @@ * Initial RAM & stack pointer *----------------------------------------------------------------------*/ /* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */ -#define CFG_INIT_RAM_OCM 1 /* OCM as init ram */ #define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */ #define CFG_OCM_DATA_ADDR CFG_OCM_BASE -- cgit v1.3.1 From c25dd8fc25e9ca3695db996a257d9ba4dab414db Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Thu, 23 Aug 2007 11:02:37 +0200 Subject: ppc4xx: Add support for 2nd I2C EEPROM on lwmon5 board This patch adds support for the 2nd EEPROM (AT24C128) on the lwmon5 board. Now the "eeprom" command can be used to read/write from/to this device. Additionally a new command was added "eepromwp" to en-/disable the write-protect of this 2nd EEPROM. The 1st EEPROM is not affected by this write-protect command. Signed-off-by: Stefan Roese --- board/lwmon5/lwmon5.c | 27 +++++++++++++++++++++++++++ include/configs/lwmon5.h | 15 +++++++++------ 2 files changed, 36 insertions(+), 6 deletions(-) (limited to 'include/configs') diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c index 0958194ecaa..77f998971a0 100644 --- a/board/lwmon5/lwmon5.c +++ b/board/lwmon5/lwmon5.c @@ -19,6 +19,7 @@ */ #include +#include #include #include #include @@ -527,3 +528,29 @@ void hw_watchdog_reset(void) val = gpio_read_out_bit(CFG_GPIO_WATCHDOG) == 0 ? 1 : 0; gpio_write_bit(CFG_GPIO_WATCHDOG, val); } + +int do_eeprom_wp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + if (argc < 2) { + printf("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + if ((strcmp(argv[1], "on") == 0)) { + gpio_write_bit(CFG_GPIO_EEPROM_EXT_WP, 1); + } else if ((strcmp(argv[1], "off") == 0)) { + gpio_write_bit(CFG_GPIO_EEPROM_EXT_WP, 0); + } else { + printf("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + + return 0; +} + +U_BOOT_CMD( + eepromwp, 2, 0, do_eeprom_wp, + "eepromwp- eeprom write protect off/on\n", + " - enable (on) or disable (off) I2C EEPROM write protect\n" +); diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 23b19ba89ac..7b2def3d203 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -161,15 +161,16 @@ *----------------------------------------------------------------------*/ #define CONFIG_HARD_I2C 1 /* I2C with hardware support */ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ -#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SPEED 100000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F -#define CFG_I2C_MULTI_EEPROMS -#define CFG_I2C_EEPROM_ADDR (0xa8>>1) -#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_I2C_EEPROM_ADDR 0x53 /* EEPROM AT24C128 */ +#define CFG_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */ +#define CFG_EEPROM_PAGE_WRITE_BITS 6 /* The Atmel AT24C128 has */ + /* 64 byte page write mode using*/ + /* last 6 bits of the address */ +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ #define CFG_EEPROM_PAGE_WRITE_ENABLE -#define CFG_EEPROM_PAGE_WRITE_BITS 3 -#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 #define CONFIG_RTC_PCF8563 1 /* enable Philips PCF8563 RTC */ #define CFG_I2C_RTC_ADDR 0x51 /* Philips PCF8563 RTC address */ @@ -397,6 +398,8 @@ #define CFG_GPIO_PHY1_RST 12 #define CFG_GPIO_FLASH_WP 14 #define CFG_GPIO_PHY0_RST 22 +#define CFG_GPIO_EEPROM_EXT_WP 55 +#define CFG_GPIO_EEPROM_INT_WP 57 #define CFG_GPIO_WATCHDOG 58 #define CFG_GPIO_LIME_S 59 #define CFG_GPIO_LIME_RST 60 -- cgit v1.3.1 From d7bfa620037a6d2210159387571bdf93aa32c162 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Fri, 24 Aug 2007 15:19:10 +0200 Subject: ppc4xx: Change GPIO signal for watchdog triggering on lwmon5 Signed-off-by: Stefan Roese --- include/configs/lwmon5.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/configs') diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 7b2def3d203..ecca577aa44 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -400,9 +400,9 @@ #define CFG_GPIO_PHY0_RST 22 #define CFG_GPIO_EEPROM_EXT_WP 55 #define CFG_GPIO_EEPROM_INT_WP 57 -#define CFG_GPIO_WATCHDOG 58 #define CFG_GPIO_LIME_S 59 #define CFG_GPIO_LIME_RST 60 +#define CFG_GPIO_WATCHDOG 63 /*----------------------------------------------------------------------- * PPC440 GPIO Configuration -- cgit v1.3.1 From 75e1a84d483e36be10e206e539b028c4889e1158 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Fri, 24 Aug 2007 15:41:42 +0200 Subject: ppc4xx: Add RTC POST test to lwmon5 board configuration Since this RTC POST test is taking quite a while to complete it's only initiated upon special keypress same as the complete memory POST. Signed-off-by: Stefan Roese --- include/configs/lwmon5.h | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) (limited to 'include/configs') diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index ecca577aa44..be483245b91 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -142,15 +142,16 @@ #endif /* POST support */ -#define CONFIG_POST (CFG_POST_MEMORY | \ - CFG_POST_ECC_ON | \ +#define CONFIG_POST (CFG_POST_CACHE | \ CFG_POST_CPU | \ - CFG_POST_UART | \ - CFG_POST_I2C | \ - CFG_POST_CACHE | \ - CFG_POST_FPU | \ + CFG_POST_ECC_ON | \ CFG_POST_ETHER | \ - CFG_POST_SPR) + CFG_POST_FPU | \ + CFG_POST_I2C | \ + CFG_POST_MEMORY | \ + CFG_POST_RTC | \ + CFG_POST_SPR | \ + CFG_POST_UART) #define CFG_POST_CACHE_ADDR 0x10000000 /* free virtual address */ #define CONFIG_LOGBUFFER -- cgit v1.3.1 From f98984cb194bb34dbe1db9429d3b51133af30d07 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Tue, 28 Aug 2007 17:39:14 +0200 Subject: IDE: - make ide_inb () and ide_outb () "weak", so boards can define there own I/O functions. (Needed for the pcs440ep board). - The default I/O Functions are again 8 Bit accesses. - Added CONFIG_CMD_IDE for the pcs440ep Board. Signed-off-by: Heiko Schocher --- board/pcs440ep/pcs440ep.c | 24 ++++++++++++++++++++++ common/cmd_ide.c | 51 +++++++++++++++------------------------------- include/asm-ppc/io.h | 3 +++ include/configs/pcs440ep.h | 13 ++++-------- include/ide.h | 2 ++ 5 files changed, 49 insertions(+), 44 deletions(-) (limited to 'include/configs') diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c index e247fee0c17..90e99d3dca8 100644 --- a/board/pcs440ep/pcs440ep.c +++ b/board/pcs440ep/pcs440ep.c @@ -30,6 +30,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -867,6 +868,29 @@ U_BOOT_CMD( ); #endif +#if defined (CONFIG_CMD_IDE) +/* These addresses need to be shifted one place to the left + * ( bus per_addr 20 -30 is connectsd on CF bus A10-A0) + * These values are shifted + */ +extern ulong *ide_bus_offset; +void inline ide_outb(int dev, int port, unsigned char val) +{ + debug ("ide_outb (dev= %d, port= 0x%x, val= 0x%02x) : @ 0x%08lx\n", + dev, port, val, (ATA_CURR_BASE(dev)+port)); + + out_be16((u16 *)(ATA_CURR_BASE(dev)+(port << 1)), val); +} +unsigned char inline ide_inb(int dev, int port) +{ + uchar val; + val = in_be16((u16 *)(ATA_CURR_BASE(dev)+(port << 1))); + debug ("ide_inb (dev= %d, port= 0x%x) : @ 0x%08lx -> 0x%02x\n", + dev, port, (ATA_CURR_BASE(dev)+port), val); + return (val); +} +#endif + #ifdef CONFIG_IDE_PREINIT int ide_preinit (void) { diff --git a/common/cmd_ide.c b/common/cmd_ide.c index 89fefed33d0..bb064eaa04a 100644 --- a/common/cmd_ide.c +++ b/common/cmd_ide.c @@ -31,6 +31,7 @@ #include #include #include +#include #if defined(CONFIG_IDE_8xx_DIRECT) || defined(CONFIG_IDE_PCMCIA) # include @@ -128,8 +129,6 @@ ulong ide_bus_offset[CFG_IDE_MAXBUS] = { }; -#define ATA_CURR_BASE(dev) (CFG_ATA_BASE_ADDR+ide_bus_offset[IDE_BUS(dev)]) - #ifndef CONFIG_AMIGAONEG3SE static int ide_bus_ok[CFG_IDE_MAXBUS]; #else @@ -172,8 +171,8 @@ static uchar ide_wait (int dev, ulong t); #define IDE_SPIN_UP_TIME_OUT 5000 /* 5 sec spin-up timeout */ -static void __inline__ ide_outb(int dev, int port, unsigned char val); -static unsigned char __inline__ ide_inb(int dev, int port); +void inline ide_outb(int dev, int port, unsigned char val); +unsigned char inline ide_inb(int dev, int port); static void input_data(int dev, ulong *sect_buf, int words); static void output_data(int dev, ulong *sect_buf, int words); static void ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len); @@ -805,45 +804,27 @@ set_pcmcia_timing (int pmode) /* ------------------------------------------------------------------------- */ -#if defined(__PPC__) || defined(CONFIG_PXA_PCMCIA) -static void __inline__ -ide_outb(int dev, int port, unsigned char val) +void inline +__ide_outb(int dev, int port, unsigned char val) { debug ("ide_outb (dev= %d, port= 0x%x, val= 0x%02x) : @ 0x%08lx\n", - dev, port, val, (ATA_CURR_BASE(dev)+port)); - - /* Ensure I/O operations complete */ - EIEIO; - *((u16 *)(ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port))) = val; -} -#else /* ! __PPC__ */ -static void __inline__ -ide_outb(int dev, int port, unsigned char val) -{ - outb(val, ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)); + dev, port, val, (ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port))); + outb(val, (ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port))); } -#endif /* __PPC__ */ - +void inline ide_outb (int dev, int port, unsigned char val) + __attribute__((weak, alias("__ide_outb"))); -#if defined(__PPC__) || defined(CONFIG_PXA_PCMCIA) -static unsigned char __inline__ -ide_inb(int dev, int port) +unsigned char inline +__ide_inb(int dev, int port) { uchar val; - /* Ensure I/O operations complete */ - EIEIO; - val = *((u16 *)(ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port))); + val = inb((ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port))); debug ("ide_inb (dev= %d, port= 0x%x) : @ 0x%08lx -> 0x%02x\n", - dev, port, (ATA_CURR_BASE(dev)+port), val); - return (val); + dev, port, (ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)), val); + return val; } -#else /* ! __PPC__ */ -static unsigned char __inline__ -ide_inb(int dev, int port) -{ - return inb(ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)); -} -#endif /* __PPC__ */ +unsigned char inline ide_inb(int dev, int port) + __attribute__((weak, alias("__ide_inb"))); #ifdef __PPC__ # ifdef CONFIG_AMIGAONEG3SE diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h index 03289bcc214..11dfa1c57b4 100644 --- a/include/asm-ppc/io.h +++ b/include/asm-ppc/io.h @@ -13,6 +13,9 @@ #define SIO_CONFIG_RA 0x398 #define SIO_CONFIG_RD 0x399 +#ifndef _IO_BASE +#define _IO_BASE 0 +#endif #define readb(addr) in_8((volatile u8 *)(addr)) #define writeb(b,addr) out_8((volatile u8 *)(addr), (b)) diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h index 8e51d2d3c05..7653ba1d245 100644 --- a/include/configs/pcs440ep.h +++ b/include/configs/pcs440ep.h @@ -266,7 +266,10 @@ #define CONFIG_CMD_DIAG #define CONFIG_CMD_EEPROM #define CONFIG_CMD_ELF +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT #define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE #define CONFIG_CMD_IRQ #define CONFIG_CMD_MII #define CONFIG_CMD_NET @@ -274,12 +277,10 @@ #define CONFIG_CMD_PCI #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO +#define CONFIG_CMD_REISER #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_CMD_USB - #define CONFIG_SUPPORT_VFAT /* @@ -488,10 +489,4 @@ /* Offset for alternate registers */ #define CFG_ATA_ALT_OFFSET (0x0000) -/* These addresses need to be shifted one place to the left - * ( bus per_addr 20 -30 is connectsd on CF bus A10-A0) - * These values are shifted - */ -#define CFG_ATA_PORT_ADDR(port) ((port) << 1) - #endif /* __CONFIG_H */ diff --git a/include/ide.h b/include/ide.h index 6976a6c319c..222f4f84e48 100644 --- a/include/ide.h +++ b/include/ide.h @@ -26,6 +26,8 @@ #define IDE_BUS(dev) (dev >> 1) +#define ATA_CURR_BASE(dev) (CFG_ATA_BASE_ADDR+ide_bus_offset[IDE_BUS(dev)]) + #ifdef CONFIG_IDE_LED /* -- cgit v1.3.1 From a861558c65f65f1cf1302f3a35e9db7686b9e1a3 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Tue, 28 Aug 2007 17:40:33 +0200 Subject: [UC101] Fix: if no CF in the board, U-Boot resets sometimes. Signed-off-by: Heiko Schocher --- cpu/mpc5xxx/ide.c | 8 ++++++++ include/configs/uc101.h | 1 - 2 files changed, 8 insertions(+), 1 deletion(-) (limited to 'include/configs') diff --git a/cpu/mpc5xxx/ide.c b/cpu/mpc5xxx/ide.c index 087ddac109d..344e6f20294 100644 --- a/cpu/mpc5xxx/ide.c +++ b/cpu/mpc5xxx/ide.c @@ -54,11 +54,19 @@ int ide_preinit (void) /* All sample codes do that... */ *(vu_long *) MPC5XXX_ATA_SHARE_COUNT = 0; +#if defined(CONFIG_UC101) + /* Configure and reset host */ + *(vu_long *) MPC5XXX_ATA_HOST_CONFIG = + MPC5xxx_ATA_HOSTCONF_SMR | MPC5xxx_ATA_HOSTCONF_FR; + udelay (10); + *(vu_long *) MPC5XXX_ATA_HOST_CONFIG = 0; +#else /* Configure and reset host */ *(vu_long *) MPC5XXX_ATA_HOST_CONFIG = MPC5xxx_ATA_HOSTCONF_IORDY | MPC5xxx_ATA_HOSTCONF_SMR | MPC5xxx_ATA_HOSTCONF_FR; udelay (10); *(vu_long *) MPC5XXX_ATA_HOST_CONFIG = MPC5xxx_ATA_HOSTCONF_IORDY; +#endif /* Disable prefetch on Commbus */ psdma->PtdCntrl |= 1; diff --git a/include/configs/uc101.h b/include/configs/uc101.h index 3b471d0a97f..aed80ec1e51 100644 --- a/include/configs/uc101.h +++ b/include/configs/uc101.h @@ -332,7 +332,6 @@ #define CFG_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */ #define CONFIG_IDE_PREINIT 1 -/* #define CONFIG_IDE_RESET 1 beispile siehe tqm5200.c */ #define CFG_ATA_IDE0_OFFSET 0x0000 -- cgit v1.3.1 From 3bb342fc85d79dbb6b8c2039e7cdcddc82b8d90f Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Fri, 10 Aug 2007 14:34:14 -0500 Subject: fdt: remove unused OF_FLAT_TREE_MAX_SIZE references and make some minor corrections to the FDT part of the README. Signed-off-by: Kim Phillips --- README | 10 ++++------ include/configs/IceCube.h | 3 --- include/configs/MPC8313ERDB.h | 3 --- include/configs/MPC832XEMDS.h | 3 --- include/configs/MPC8349EMDS.h | 3 --- include/configs/MPC8349ITX.h | 3 --- include/configs/MPC8360EMDS.h | 4 ---- include/configs/MPC8540ADS.h | 3 --- include/configs/MPC8541CDS.h | 3 --- include/configs/MPC8544DS.h | 3 --- include/configs/MPC8548CDS.h | 3 --- include/configs/MPC8555CDS.h | 3 --- include/configs/MPC8560ADS.h | 3 --- include/configs/MPC8568MDS.h | 3 --- include/configs/MPC8641HPCN.h | 3 --- include/configs/TQM5200.h | 2 -- include/configs/jupiter.h | 3 --- include/configs/motionpro.h | 2 -- include/configs/mpc7448hpc2.h | 3 --- include/configs/sbc8349.h | 3 --- include/configs/stxxtc.h | 3 --- 21 files changed, 4 insertions(+), 65 deletions(-) (limited to 'include/configs') diff --git a/README b/README index 4b1982b221f..09eb76fe452 100644 --- a/README +++ b/README @@ -338,7 +338,7 @@ The following options need to be configured: CONFIG_OF_LIBFDT * New libfdt-based support * Adds the "fdt" command - * The bootm command does _not_ modify the fdt + * The bootm command automatically updates the fdt CONFIG_OF_FLAT_TREE * Deprecated, see CONFIG_OF_LIBFDT @@ -347,15 +347,13 @@ The following options need to be configured: * The environment variable "disable_of", when set, disables this functionality. - CONFIG_OF_FLAT_TREE_MAX_SIZE - - The maximum size of the constructed OF tree. - OF_CPU - The proper name of the cpus node. OF_SOC - The proper name of the soc node. OF_TBCLK - The timebase frequency. OF_STDOUT_PATH - The path to the console device + boards with QUICC Engines require OF_QE to set UCC mac addresses + CONFIG_OF_HAS_BD_T * CONFIG_OF_LIBFDT - enables the "fdt bd_t" command @@ -365,7 +363,7 @@ The following options need to be configured: CONFIG_OF_HAS_UBOOT_ENV - * CONFIG_OF_LIBFDT - enables the "fdt bd_t" command + * CONFIG_OF_LIBFDT - enables the "fdt env" command * CONFIG_OF_FLAT_TREE - The resulting flat device tree will have a copy of u-boot's environment variables diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h index 532615485c5..bdd92bae3cc 100644 --- a/include/configs/IceCube.h +++ b/include/configs/IceCube.h @@ -181,9 +181,6 @@ #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,5200@0" #define OF_SOC "soc5200@f0000000" #define OF_TBCLK (bd->bi_busfreq / 4) diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 36b0f160b53..6568fe13b85 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -231,9 +231,6 @@ #define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8313@0" #define OF_SOC "soc8313@e0000000" #define OF_TBCLK (bd->bi_busfreq / 4) diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index efc317288e2..c9c6d88cf01 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -321,9 +321,6 @@ #define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8323@0" #define OF_SOC "soc8323@e0000000" #define OF_QE "qe@e0100000" diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index c1f1c747c9c..92555bac422 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -342,9 +342,6 @@ #define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8349@0" #define OF_SOC "soc8349@e0000000" #define OF_TBCLK (bd->bi_busfreq / 4) diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 3311d5c1f35..54cab528bde 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -299,9 +299,6 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8349@0" #define OF_SOC "soc8349@e0000000" #define OF_TBCLK (bd->bi_busfreq / 4) diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index 094b66e7c9d..41f062ce72e 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -351,10 +351,6 @@ #define CONFIG_OF_HAS_BD_T 1 #define CONFIG_OF_HAS_UBOOT_ENV 1 - -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8360@0" #define OF_SOC "soc8360@e0000000" #define OF_QE "qe@e0100000" diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index 22de2fb2c74..be603ac117b 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -301,9 +301,6 @@ #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8540@0" #define OF_SOC "soc8540@e0000000" #define OF_TBCLK (bd->bi_busfreq / 8) diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index a4727b29b8d..4e061bd9ff2 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -312,9 +312,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8541@0" #define OF_SOC "soc8541@e0000000" #define OF_TBCLK (bd->bi_busfreq / 8) diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 746f360f9e1..07631b921f6 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -252,9 +252,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8544@0" #define OF_SOC "soc8544@e0000000" #define OF_TBCLK (bd->bi_busfreq / 8) diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 58a8ea55c3b..682f0c05751 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -336,9 +336,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8548@0" #define OF_SOC "soc8548@e0000000" #define OF_TBCLK (bd->bi_busfreq / 8) diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 8d7d6579dae..1d1b7c90795 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -312,9 +312,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8555@0" #define OF_SOC "soc8555@e0000000" #define OF_TBCLK (bd->bi_busfreq / 8) diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index b3c33d9f7de..a8f362fa134 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -292,9 +292,6 @@ #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8560@0" #define OF_SOC "soc8560@e0000000" #define OF_TBCLK (bd->bi_busfreq / 8) diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 80ccda51f7c..d5a14fc3922 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -293,9 +293,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8568@0" #define OF_SOC "soc8568@e0000000" #define OF_QE "qe@e0080000" diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 03e815d87d1..bf25f7f4f98 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -268,9 +268,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8641@0" #define OF_SOC "soc8641@f8000000" #define OF_TBCLK (bd->bi_busfreq / 4) diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 3d9850023dd..c08173b075f 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -704,8 +704,6 @@ #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 #define OF_CPU "PowerPC,5200@0" #define OF_SOC "soc5200@f0000000" #define OF_TBCLK (bd->bi_busfreq / 4) diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h index b68c5aa46e5..4070ab971eb 100644 --- a/include/configs/jupiter.h +++ b/include/configs/jupiter.h @@ -148,9 +148,6 @@ #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,5200@0" #define OF_SOC "soc5200@f0000000" #define OF_TBCLK (bd->bi_busfreq / 8) diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index e0a827fdd71..82827c692f5 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -420,8 +420,6 @@ extern void __led_set(led_id_t id, int state); #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 #define OF_CPU "PowerPC,5200@0" #define OF_SOC "soc5200@f0000000" #define OF_TBCLK (bd->bi_busfreq / 4) diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h index f4f33f3e089..bd3107ab23c 100644 --- a/include/configs/mpc7448hpc2.h +++ b/include/configs/mpc7448hpc2.h @@ -80,9 +80,6 @@ #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,7448@0" #define OF_TSI "tsi108@c0000000" #define OF_TBCLK (bd->bi_busfreq / 8) diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index 37a8f87055b..e7d8a5a6627 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -313,9 +313,6 @@ #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8349@0" #define OF_SOC "soc8349@e0000000" #define OF_TBCLK (bd->bi_busfreq / 4) diff --git a/include/configs/stxxtc.h b/include/configs/stxxtc.h index 0dbf4b7feb6..b035857dcea 100644 --- a/include/configs/stxxtc.h +++ b/include/configs/stxxtc.h @@ -592,9 +592,6 @@ typedef unsigned int led_id_t; /* pass open firmware flat tree */ #define CONFIG_OF_FLAT_TREE 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,MPC870@0" #define OF_TBCLK (MPC8XX_HZ / 16) #define CONFIG_OF_HAS_BD_T 1 -- cgit v1.3.1 From 7608d75f9c87c9eb5b3a43219d0506d3e979a13f Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Tue, 21 Aug 2007 17:00:17 -0500 Subject: support board vendor-common makefiles if a board/$(VENDOR)/common/Makefile exists, build it. also add the first such case, board/freescale/common/Makefile, to handle building board-shared EEPROM, PIXIS, and MDS-PIB code, as dictated by board configuration. thusly get rid of alternate build dir errors such as: FATAL: can't create /work/wd/tmp/u-boot-ppc/board/freescale/mpc8360emds/../common/pq-mds-pib.o: No such file or directory by putting the common/ mkdir command in its proper place (the common Makefile). Common bits from existing individual board Makefiles have been removed. Signed-off-by: Kim Phillips --- Makefile | 2 ++ board/freescale/common/Makefile | 56 ++++++++++++++++++++++++++++++++++++ board/freescale/common/pixis.c | 3 ++ board/freescale/common/pq-mds-pib.c | 3 ++ board/freescale/mpc832xemds/Makefile | 2 +- board/freescale/mpc8360emds/Makefile | 2 +- board/freescale/mpc8544ds/Makefile | 7 +---- board/freescale/mpc8641hpcn/Makefile | 8 +----- include/configs/MPC8544DS.h | 1 + include/configs/MPC8641HPCN.h | 1 + 10 files changed, 70 insertions(+), 15 deletions(-) create mode 100644 board/freescale/common/Makefile (limited to 'include/configs') diff --git a/Makefile b/Makefile index 2e15ceaf03e..0477cd3dc2e 100644 --- a/Makefile +++ b/Makefile @@ -190,6 +190,8 @@ endif OBJS := $(addprefix $(obj),$(OBJS)) LIBS = lib_generic/libgeneric.a +LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \ + "board/$(VENDOR)/common/lib$(VENDOR).a"; fi) LIBS += board/$(BOARDDIR)/lib$(BOARD).a LIBS += cpu/$(CPU)/lib$(CPU).a ifdef SOC diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile new file mode 100644 index 00000000000..44f613e4185 --- /dev/null +++ b/board/freescale/common/Makefile @@ -0,0 +1,56 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)board/$(VENDOR)/common) +endif + +LIB = $(obj)lib$(VENDOR).a + +COBJS := sys_eeprom.o \ + pixis.o \ + pq-mds-pib.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/common/pixis.c b/board/freescale/common/pixis.c index 99cc2ee197e..ae4bef1877e 100644 --- a/board/freescale/common/pixis.c +++ b/board/freescale/common/pixis.c @@ -27,6 +27,8 @@ #include #include +#ifdef CONFIG_FSL_PIXIS + #include "pixis.h" @@ -470,3 +472,4 @@ U_BOOT_CMD( " pixis_reset altbank cf \n" " pixis_reset cf \n" ); +#endif /* CONFIG_FSL_PIXIS */ diff --git a/board/freescale/common/pq-mds-pib.c b/board/freescale/common/pq-mds-pib.c index 8c013c72fb7..d79f2eb2e82 100644 --- a/board/freescale/common/pq-mds-pib.c +++ b/board/freescale/common/pq-mds-pib.c @@ -12,6 +12,8 @@ #include #include +#ifdef CONFIG_PQ_MDS_PIB + #include "pq-mds-pib.h" int pib_init(void) @@ -100,3 +102,4 @@ int pib_init(void) i2c_set_bus_num(orig_i2c_bus); return 0; } +#endif /* CONFIG_PQ_MDS_PIB */ diff --git a/board/freescale/mpc832xemds/Makefile b/board/freescale/mpc832xemds/Makefile index ea52484c063..5ec7a871d4d 100644 --- a/board/freescale/mpc832xemds/Makefile +++ b/board/freescale/mpc832xemds/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o pci.o ../common/pq-mds-pib.o +COBJS := $(BOARD).o pci.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/freescale/mpc8360emds/Makefile b/board/freescale/mpc8360emds/Makefile index ea52484c063..5ec7a871d4d 100644 --- a/board/freescale/mpc8360emds/Makefile +++ b/board/freescale/mpc8360emds/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o pci.o ../common/pq-mds-pib.o +COBJS := $(BOARD).o pci.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/freescale/mpc8544ds/Makefile b/board/freescale/mpc8544ds/Makefile index 308f707de03..006fdc95e70 100644 --- a/board/freescale/mpc8544ds/Makefile +++ b/board/freescale/mpc8544ds/Makefile @@ -24,14 +24,9 @@ include $(TOPDIR)/config.mk -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o \ - ../common/pixis.o +COBJS := $(BOARD).o SOBJS := init.o diff --git a/board/freescale/mpc8641hpcn/Makefile b/board/freescale/mpc8641hpcn/Makefile index 93b015d4743..201da3ebead 100644 --- a/board/freescale/mpc8641hpcn/Makefile +++ b/board/freescale/mpc8641hpcn/Makefile @@ -23,15 +23,9 @@ include $(TOPDIR)/config.mk -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o \ - ../common/sys_eeprom.o \ - ../common/pixis.o +COBJS := $(BOARD).o SOBJS := init.o diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 07631b921f6..9743f031e0b 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -181,6 +181,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CFG_BR3_PRELIM 0xf8100801 /* port size 8bit */ #define CFG_OR3_PRELIM 0xfff06ff7 /* 1MB PIXIS area*/ +#define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */ #define PIXIS_BASE 0xf8100000 /* PIXIS registers */ #define PIXIS_ID 0x0 /* Board ID at offset 0 */ #define PIXIS_VER 0x1 /* Board version at offset 1 */ diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index bf25f7f4f98..7d8a380dc04 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -185,6 +185,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CFG_OR3_PRELIM 0xfff06ff7 /* 1MB PIXIS area*/ +#define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */ #define PIXIS_BASE 0xf8100000 /* PIXIS registers */ #define PIXIS_ID 0x0 /* Board ID at offset 0 */ #define PIXIS_VER 0x1 /* Board version at offset 1 */ -- cgit v1.3.1 From 7a1ac419fa0d2d23ddd08bd61d16896a9f33c933 Mon Sep 17 00:00:00 2001 From: Haiying Wang Date: Thu, 23 Aug 2007 15:20:54 -0400 Subject: Enable L2 cache for MPC8568MDS board The L2 cache size is 512KB for 8568, print out the correct informaiton. Signed-off-by: Haiying Wang --- cpu/mpc85xx/cpu_init.c | 2 +- include/configs/MPC8568MDS.h | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'include/configs') diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c index 7b9961013c0..79ad20c91aa 100644 --- a/cpu/mpc85xx/cpu_init.c +++ b/cpu/mpc85xx/cpu_init.c @@ -247,7 +247,7 @@ int cpu_init_r(void) switch (cache_ctl & 0x30000000) { case 0x20000000: if (ver == SVR_8548 || ver == SVR_8548_E || - ver == SVR_8544) { + ver == SVR_8544 || ver == SVR_8568_E) { printf ("L2 cache 512KB:"); /* set L2E=1, L2I=1, & L2SRAM=0 */ cache_ctl = 0xc0000000; diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index d5a14fc3922..ba744e99f8d 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -63,9 +63,9 @@ extern unsigned long get_clock_freq(void); /* * These can be toggled for performance analysis, otherwise use default. */ -/*#define CONFIG_L2_CACHE*/ /* toggle L2 cache */ -#define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ +#define CONFIG_L2_CACHE /* toggle L2 cache */ +#define CONFIG_BTB /* toggle branch predition */ +#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ /* * Only possible on E500 Version 2 or newer cores. -- cgit v1.3.1 From 4bf4abb8a4e9955556b120a1aafa30c03e74032a Mon Sep 17 00:00:00 2001 From: Ed Swarthout Date: Tue, 21 Aug 2007 09:38:59 -0500 Subject: 8548cds fixes Restore CONFIG_EXTRA_ENV_SETTINGS definition which contains the correct consoledev needed for linux boot. Standardize on fdt{file,addr} var to hold dtb file name. Set PCI inbound memory region from CFG_MEMORY_{BUS,PHYS}. Signed-off-by: Ed Swarthout --- board/cds/mpc8548cds/mpc8548cds.c | 14 +++++++++++--- include/configs/MPC8548CDS.h | 15 ++++++--------- 2 files changed, 17 insertions(+), 12 deletions(-) (limited to 'include/configs') diff --git a/board/cds/mpc8548cds/mpc8548cds.c b/board/cds/mpc8548cds/mpc8548cds.c index 48753d7e241..796ae22a691 100644 --- a/board/cds/mpc8548cds/mpc8548cds.c +++ b/board/cds/mpc8548cds/mpc8548cds.c @@ -362,20 +362,28 @@ pci_init_board(void) ); - /* outbound memory */ + /* inbound */ pci_set_region(hose->regions + 0, + CFG_PCI_MEMORY_BUS, + CFG_PCI_MEMORY_PHYS, + CFG_PCI_MEMORY_SIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + + /* outbound memory */ + pci_set_region(hose->regions + 1, CFG_PCI1_MEM_BASE, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ - pci_set_region(hose->regions + 1, + pci_set_region(hose->regions + 2, CFG_PCI1_IO_BASE, CFG_PCI1_IO_PHYS, CFG_PCI1_IO_SIZE, PCI_REGION_IO); - hose->region_count = 2; + hose->region_count = 3; /* relocate config table pointers */ hose->config_table = \ diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 682f0c05751..60837151893 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -633,7 +633,6 @@ extern unsigned long get_clock_freq(void); #define ENET_ENV "" #endif -#if 0 #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ @@ -646,8 +645,8 @@ extern unsigned long get_clock_freq(void); "consoledev=ttyS1\0" \ "ramdiskaddr=2000000\0" \ "ramdiskfile=ramdisk.uboot\0" \ - "dtbaddr=c00000\0" \ - "dtbfile=mpc8548cds.dtb\0" \ + "fdtaddr=c00000\0" \ + "fdtfile=mpc8548cds.dtb\0" \ "eoi=mw e00400b0 0\0" \ "iack=md e00400a0 1\0" \ "ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4; md ${a}bf0 4;" \ @@ -669,8 +668,6 @@ extern unsigned long get_clock_freq(void); PCI_ENV1 \ PCI_ENV2 \ ENET_ENV -#endif - #define CONFIG_NFSBOOTCOMMAND \ "setenv bootargs root=/dev/nfs rw " \ @@ -678,8 +675,8 @@ extern unsigned long get_clock_freq(void); "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ "console=$consoledev,$baudrate $othbootargs;" \ "tftp $loadaddr $bootfile;" \ - "tftp $dtbaddr $dtbfile;" \ - "bootm $loadaddr - $dtbaddr" + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" #define CONFIG_RAMBOOTCOMMAND \ @@ -687,8 +684,8 @@ extern unsigned long get_clock_freq(void); "console=$consoledev,$baudrate $othbootargs;" \ "tftp $ramdiskaddr $ramdiskfile;" \ "tftp $loadaddr $bootfile;" \ - "tftp $dtbaddr $dtbfile;" \ - "bootm $loadaddr $ramdiskaddr $dtbaddr" + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND -- cgit v1.3.1 From 2d1f23aa1e74e4a8f8ffa67f246eb98c522dfd7f Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Wed, 29 Aug 2007 13:35:03 +0200 Subject: Disable network support on cmi_mpc5xx board ..because it caused compiler errors and there seems to be no board maintainer to take care of this. Signed-off-by: Wolfgang Denk --- include/configs/cmi_mpc5xx.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/configs') diff --git a/include/configs/cmi_mpc5xx.h b/include/configs/cmi_mpc5xx.h index cd92af23522..85c2b96fec7 100644 --- a/include/configs/cmi_mpc5xx.h +++ b/include/configs/cmi_mpc5xx.h @@ -59,6 +59,8 @@ */ #include +#undef CONFIG_CMD_NET /* disabeled - causes compile errors */ + #define CONFIG_CMD_MEMORY #define CONFIG_CMD_LOADB #define CONFIG_CMD_REGINFO -- cgit v1.3.1 From 2602a5c40ae37ab965a4e240854fdaffb51328a4 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Wed, 29 Aug 2007 09:06:05 -0500 Subject: sbc8641: remove unused OF_FLAT_TREE_MAX_SIZE this had slipped through the cracks, since the sbc board was added after I wrote the original patch to remove all these symbols, and before it was merged. Signed-off-by: Kim Phillips --- include/configs/sbc8641d.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/configs') diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index 3525ab4c5b0..54eac38b86f 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -270,9 +270,6 @@ #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8641@0" #define OF_SOC "soc@f8000000" #define OF_TBCLK (bd->bi_busfreq / 4) -- cgit v1.3.1 From 04625764cc93ce8a61625ac19d7fe2a2ceee8143 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Wed, 29 Aug 2007 16:31:18 +0200 Subject: ppc4xx: Change lwmon5 default environment to support Linux RTC The Linux PCF8563 RTC driver doesn't do autoprobing, so we need to supply the RTC I2C address as bootline parameter. This patch adds support for this rtc probing parameter to the bootargs: "rtc-pcf8563.probe=0,0x51" Signed-off-by: Stefan Roese --- include/configs/lwmon5.h | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'include/configs') diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index be483245b91..50df8481393 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -200,12 +200,13 @@ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ ":${hostname}:${netdev}:off panic=1\0" \ "addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate}\0"\ - "flash_nfs=run nfsargs addip addtty;" \ + "addmisc=setenv bootargs ${bootargs} rtc-pcf8563.probe=0,0x51\0"\ + "flash_nfs=run nfsargs addip addtty addmisc;" \ "bootm ${kernel_addr}\0" \ - "flash_self=run ramargs addip addtty;" \ + "flash_self=run ramargs addip addtty addmisc;" \ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ - "bootm\0" \ + "net_nfs=tftp 200000 ${bootfile};" \ + "run nfsargs addip addtty addmisc;bootm\0" \ "rootpath=/opt/eldk/ppc_4xxFP\0" \ "bootfile=/tftpboot/lwmon5/uImage\0" \ "kernel_addr=FC000000\0" \ -- cgit v1.3.1 From 81b73dec16fd1227369a191e725e10044a9d56b8 Mon Sep 17 00:00:00 2001 From: Gary Jennejohn Date: Fri, 31 Aug 2007 15:21:46 +0200 Subject: ppc4xx: (Re-)Enable CONFIG_PCI_PNP on AMCC 440EPx Sequoia The 440EPx has a problem when the PCI_CACHE_LINE_SIZE register is set to non-zero, because it doesn't support MRM (memory-read- multiple) correctly. We now added the possibility to configure this register in the board config file, so that the default value of 8 can be overridden. Here the details of this patch: o drivers_pci_auto.c: introduce CFG_PCI_CACHE_LINE_SIZE to allow board-specific settings. As an example the sequoia board requires 0. Idea from Stefan Roese . o board/amcc/sequoia/init.S: add a TLB mapping at 0xE8000000 for the PCI IO-space. Obtained from Stefan Roese . o include/configs/sequoia.h: turn CONFIG_PCI_PNP back on and set CFG_PCI_CACHE_LINE_SIZE to 0. Signed-off-by: Gary Jennejohn Signed-off-by: Stefan Roese --- board/amcc/sequoia/init.S | 3 +++ drivers/pci_auto.c | 8 +++++++- include/configs/sequoia.h | 3 ++- 3 files changed, 12 insertions(+), 2 deletions(-) (limited to 'include/configs') diff --git a/board/amcc/sequoia/init.S b/board/amcc/sequoia/init.S index 45bcd4bef75..5fe3af9a092 100644 --- a/board/amcc/sequoia/init.S +++ b/board/amcc/sequoia/init.S @@ -126,6 +126,9 @@ tlbtab: /* TLB-entry for peripherals */ tlbentry( 0xEF000000, SZ_16M, 0xEF000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I) + /* TLB-entry PCI IO Space - from sr@denx.de */ + tlbentry(0xE8000000, SZ_64K, 0xE8000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I) + tlbtab_end #if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) diff --git a/drivers/pci_auto.c b/drivers/pci_auto.c index 2378553be5a..acfda83ba50 100644 --- a/drivers/pci_auto.c +++ b/drivers/pci_auto.c @@ -28,6 +28,11 @@ #define PCIAUTO_IDE_MODE_MASK 0x05 +/* the user can define CFG_PCI_CACHE_LINE_SIZE to avoid problems */ +#ifndef CFG_PCI_CACHE_LINE_SIZE +#define CFG_PCI_CACHE_LINE_SIZE 8 +#endif + /* * */ @@ -150,7 +155,8 @@ void pciauto_setup_device(struct pci_controller *hose, } pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat); - pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); + pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, + CFG_PCI_CACHE_LINE_SIZE); pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); } diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index 824a81240cd..c2e1386217f 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -400,7 +400,8 @@ *----------------------------------------------------------------------*/ /* General PCI */ #define CONFIG_PCI /* include pci support */ -#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CFG_PCI_CACHE_LINE_SIZE 0 /* to avoid problems with PNP */ #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/ -- cgit v1.3.1 From 56a9270521baaa00e12639a978302a67f61ef060 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 30 Aug 2007 16:18:18 -0500 Subject: Fix ULI RTC support on MPC8544 DS The RTC on the M1575 ULI chipset requires a dummy read before we are able to talk to the RTC. We accomplish this by adding a second memory region to the PHB the ULI is on and read from it. The second region is added to maintain compatiabilty with Linux's view of the PCI memory map. Signed-off-by: Kumar Gala --- board/freescale/mpc8544ds/init.S | 2 +- board/freescale/mpc8544ds/mpc8544ds.c | 6 ++++++ include/configs/MPC8544DS.h | 3 +++ 3 files changed, 10 insertions(+), 1 deletion(-) (limited to 'include/configs') diff --git a/board/freescale/mpc8544ds/init.S b/board/freescale/mpc8544ds/init.S index 900c3680c71..68ccba746ba 100644 --- a/board/freescale/mpc8544ds/init.S +++ b/board/freescale/mpc8544ds/init.S @@ -237,6 +237,6 @@ law_entry: /* contains both PCIE3 MEM & IO space */ .long (CFG_PCIE3_MEM_PHYS>>12) & 0xfffff - .long LAWAR_EN | LAWAR_TRGT_PCIE3 | (LAWAR_SIZE & LAWAR_SIZE_2M) + .long LAWAR_EN | LAWAR_TRGT_PCIE3 | (LAWAR_SIZE & LAWAR_SIZE_4M) 4: entry_end diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c index 4c3b27f2389..76d909191f9 100644 --- a/board/freescale/mpc8544ds/mpc8544ds.c +++ b/board/freescale/mpc8544ds/mpc8544ds.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include @@ -222,6 +223,11 @@ pci_init_board(void) printf (" PCIE3 on bus %02x - %02x\n", hose->first_busno,hose->last_busno); + /* + * Activate ULI1575 legacy chip by performing a fake + * memory access. Needed to make ULI RTC work. + */ + in_be32(CFG_PCIE3_MEM_BASE); } else { printf (" PCIE3: disabled\n"); } diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 9743f031e0b..f580ccadee5 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -310,6 +310,9 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CFG_PCIE3_IO_BASE 0x00000000 #define CFG_PCIE3_IO_PHYS 0xb0100000 /* reuse mem LAW */ #define CFG_PCIE3_IO_SIZE 0x00100000 /* 1M */ +#define CFG_PCIE3_MEM_BASE2 0xb0200000 +#define CFG_PCIE3_MEM_PHYS2 CFG_PCIE3_MEM_BASE2 +#define CFG_PCIE3_MEM_SIZE2 0x00200000 /* 1M */ #if defined(CONFIG_PCI) -- cgit v1.3.1 From cf2817a84c2e9bea2c5dfc084bce2f2d2563ac43 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 6 Sep 2007 09:46:23 -0600 Subject: Migrate 5xxx boards from CONFIG_OF_FLAT_TREE to CONFIG_OF_LIBFDT Affects boards: icecube (lite5200), jupiter, motionpro, tqm5200 Tested on: lite5200b Note: the fixup functions have not been moved to a common place. This patch is targeted for immediate merging as in solves a build issue, but the final name/location of the fixups is still subject to debate. I propose to merge this now, and move the fixups in the next merge window to be usable by all targets. Signed-off-by: Grant Likely --- board/icecube/icecube.c | 7 ++--- board/jupiter/jupiter.c | 8 ++---- board/motionpro/motionpro.c | 8 +++--- board/tqm5200/tqm5200.c | 9 +++---- cpu/mpc5xxx/cpu.c | 66 ++++++++++++++++++++++++++++----------------- include/configs/IceCube.h | 2 +- include/configs/TQM5200.h | 2 +- include/configs/jupiter.h | 2 +- include/configs/motionpro.h | 2 +- 9 files changed, 55 insertions(+), 51 deletions(-) (limited to 'include/configs') diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c index c027f6f34e6..07ba2459d89 100644 --- a/board/icecube/icecube.c +++ b/board/icecube/icecube.c @@ -28,10 +28,7 @@ #include #include #include - -#if defined(CONFIG_OF_FLAT_TREE) -#include -#endif +#include #if defined(CONFIG_LITE5200B) #include "mt46v32m16.h" @@ -386,7 +383,7 @@ void ide_set_reset (int idereset) } #endif -#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) void ft_board_setup(void *blob, bd_t *bd) { diff --git a/board/jupiter/jupiter.c b/board/jupiter/jupiter.c index b2274875e51..efdc333493e 100644 --- a/board/jupiter/jupiter.c +++ b/board/jupiter/jupiter.c @@ -28,11 +28,7 @@ #include #include #include - -#if defined(CONFIG_OF_FLAT_TREE) -#include -#endif - +#include #define SDRAM_DDR 0 #if 1 @@ -308,7 +304,7 @@ void ide_set_reset (int idereset) } #endif -#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) void ft_board_setup(void *blob, bd_t *bd) { diff --git a/board/motionpro/motionpro.c b/board/motionpro/motionpro.c index 6eb5fe9cfc9..f83998e5aa0 100644 --- a/board/motionpro/motionpro.c +++ b/board/motionpro/motionpro.c @@ -29,9 +29,7 @@ #include #include #include -#if defined(CONFIG_OF_FLAT_TREE) -#include -#endif +#include #if defined(CONFIG_STATUS_LED) #include @@ -196,12 +194,12 @@ int checkboard(void) } -#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); } -#endif /* defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) */ +#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ #if defined(CONFIG_STATUS_LED) diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c index 51f4aebc06e..21f67aa4e53 100644 --- a/board/tqm5200/tqm5200.c +++ b/board/tqm5200/tqm5200.c @@ -31,10 +31,7 @@ #include #include #include - -#if defined(CONFIG_OF_FLAT_TREE) -#include -#endif +#include #ifdef CONFIG_VIDEO_SM501 #include @@ -780,9 +777,9 @@ int board_get_height (void) #endif /* CONFIG_VIDEO_SM501 */ -#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); } -#endif /* defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) */ +#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/cpu/mpc5xxx/cpu.c b/cpu/mpc5xxx/cpu.c index 1eac2bbfbe1..7f16b92a6ca 100644 --- a/cpu/mpc5xxx/cpu.c +++ b/cpu/mpc5xxx/cpu.c @@ -29,10 +29,12 @@ #include #include #include +#include #include -#if defined(CONFIG_OF_FLAT_TREE) -#include +#if defined(CONFIG_OF_LIBFDT) +#include +#include #endif DECLARE_GLOBAL_DATA_PTR; @@ -111,29 +113,43 @@ unsigned long get_tbclk (void) /* ------------------------------------------------------------------------- */ -#ifdef CONFIG_OF_FLAT_TREE -void -ft_cpu_setup(void *blob, bd_t *bd) +#ifdef CONFIG_OF_LIBFDT +static void do_fixup(void *fdt, const char *node, const char *prop, + const void *val, int len, int create) { - u32 *p; - int len; - - /* Core XLB bus frequency */ - p = ft_get_prop(blob, "/cpus/" OF_CPU "/bus-frequency", &len); - if (p != NULL) - *p = cpu_to_be32(bd->bi_busfreq); - - /* SOC peripherals use the IPB bus frequency */ - p = ft_get_prop(blob, "/" OF_SOC "/bus-frequency", &len); - if (p != NULL) - *p = cpu_to_be32(bd->bi_ipbfreq); - - p = ft_get_prop(blob, "/" OF_SOC "/ethernet@3000/mac-address", &len); - if (p != NULL) - memcpy(p, bd->bi_enetaddr, 6); - - p = ft_get_prop(blob, "/" OF_SOC "/ethernet@3000/local-mac-address", &len); - if (p != NULL) - memcpy(p, bd->bi_enetaddr, 6); +#if defined(DEBUG) + int i; + debug("Updating property '%s/%s' = ", node, prop); + for (i = 0; i < len; i++) + debug(" %.2x", *(u8*)(val+i)); + debug("\n"); +#endif + int rc = fdt_find_and_setprop(fdt, node, prop, val, len, create); + if (rc) + printf("Unable to update property %s:%s, err=%s\n", + node, prop, fdt_strerror(rc)); +} + +static void do_fixup_u32(void *fdt, const char *node, const char *prop, + u32 val, int create) +{ + val = cpu_to_fdt32(val); + do_fixup(fdt, node, prop, &val, sizeof(val), create); +} + +void ft_cpu_setup(void *blob, bd_t *bd) +{ + int div = in_8((void*)CFG_MBAR + 0x204) & 0x0020 ? 8 : 4; + char * cpu_path = "/cpus/" OF_CPU; + char * eth_path = "/" OF_SOC "/ethernet@3000"; + + do_fixup_u32(blob, cpu_path, "timebase-frequency", OF_TBCLK, 1); + do_fixup_u32(blob, cpu_path, "bus-frequency", bd->bi_busfreq, 1); + do_fixup_u32(blob, cpu_path, "clock-frequency", bd->bi_intfreq, 1); + do_fixup_u32(blob, "/" OF_SOC, "bus-frequency", bd->bi_ipbfreq, 1); + do_fixup_u32(blob, "/" OF_SOC, "system-frequency", + bd->bi_busfreq*div, 1); + do_fixup(blob, eth_path, "mac-address", bd->bi_enetaddr, 6, 0); + do_fixup(blob, eth_path, "local-mac-address", bd->bi_enetaddr, 6, 0); } #endif diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h index bdd92bae3cc..4c16d22959c 100644 --- a/include/configs/IceCube.h +++ b/include/configs/IceCube.h @@ -178,7 +178,7 @@ #endif /* CONFIG_MPC5200 */ /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 #define OF_CPU "PowerPC,5200@0" diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index c08173b075f..e0c9d81be08 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -701,7 +701,7 @@ * Open firmware flat tree support *----------------------------------------------------------------------- */ -#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 #define OF_CPU "PowerPC,5200@0" diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h index 4070ab971eb..b7100e986cd 100644 --- a/include/configs/jupiter.h +++ b/include/configs/jupiter.h @@ -145,7 +145,7 @@ #if 0 /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 #define OF_CPU "PowerPC,5200@0" diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index 82827c692f5..9a216321628 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -417,7 +417,7 @@ extern void __led_set(led_id_t id, int state); #define CFG_RESET_ADDRESS 0xfff00100 /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 #define OF_CPU "PowerPC,5200@0" -- cgit v1.3.1 From 5e5803e119de3bebd76fc9a57baac0b5aeccc8a3 Mon Sep 17 00:00:00 2001 From: stefano babic Date: Thu, 30 Aug 2007 23:01:49 +0200 Subject: PXA270: Added support for TrizepsIV board. This patch add support for the Trizeps IV module (520Mhz). Signed-off-by: Stefano Babic --- Makefile | 3 + board/trizepsiv/Makefile | 51 ++++ board/trizepsiv/config.mk | 3 + board/trizepsiv/conxs.c | 146 ++++++++++++ board/trizepsiv/eeprom.c | 85 +++++++ board/trizepsiv/lowlevel_init.S | 503 ++++++++++++++++++++++++++++++++++++++++ board/trizepsiv/pxavoltage.S | 31 +++ board/trizepsiv/u-boot.lds | 56 +++++ drivers/dm9000x.c | 16 +- include/configs/trizepsiv.h | 325 ++++++++++++++++++++++++++ 10 files changed, 1217 insertions(+), 2 deletions(-) create mode 100644 board/trizepsiv/Makefile create mode 100644 board/trizepsiv/config.mk create mode 100644 board/trizepsiv/conxs.c create mode 100644 board/trizepsiv/eeprom.c create mode 100644 board/trizepsiv/lowlevel_init.S create mode 100644 board/trizepsiv/pxavoltage.S create mode 100644 board/trizepsiv/u-boot.lds create mode 100644 include/configs/trizepsiv.h (limited to 'include/configs') diff --git a/Makefile b/Makefile index 0477cd3dc2e..0371d4619d4 100644 --- a/Makefile +++ b/Makefile @@ -2334,6 +2334,9 @@ scpu_config: unconfig pxa255_idp_config: unconfig @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp +trizepsiv_config : unconfig + @$(MKCONFIG) $(@:_config=) arm pxa trizepsiv + wepep250_config : unconfig @$(MKCONFIG) $(@:_config=) arm pxa wepep250 diff --git a/board/trizepsiv/Makefile b/board/trizepsiv/Makefile new file mode 100644 index 00000000000..115e17ded92 --- /dev/null +++ b/board/trizepsiv/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := conxs.o eeprom.o +SOBJS := lowlevel_init.o pxavoltage.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/trizepsiv/config.mk b/board/trizepsiv/config.mk new file mode 100644 index 00000000000..4486f6b96db --- /dev/null +++ b/board/trizepsiv/config.mk @@ -0,0 +1,3 @@ +TEXT_BASE =0xa1f00000 +# 0xa1700000 +#TEXT_BASE = 0 diff --git a/board/trizepsiv/conxs.c b/board/trizepsiv/conxs.c new file mode 100644 index 00000000000..7c6c8550074 --- /dev/null +++ b/board/trizepsiv/conxs.c @@ -0,0 +1,146 @@ +/* + * (C) Copyright 2007 + * Stefano Babic, DENX Gmbh, sbabic@denx.de + * + * (C) Copyright 2004 + * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net + * + * (C) Copyright 2002 + * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH + * Marius Groeger + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#define RH_A_PSM (1 << 8) /* power switching mode */ +#define RH_A_NPS (1 << 9) /* no power switching */ + +extern struct serial_device serial_ffuart_device; +extern struct serial_device serial_btuart_device; +extern struct serial_device serial_stuart_device; + +/* ------------------------------------------------------------------------- */ + +/* + * Miscelaneous platform dependent initialisations + */ + +void usb_board_init(void) +{ + UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) & + ~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE); + + UHCHR |= UHCHR_FSBIR; + + while (UHCHR & UHCHR_FSBIR); + + UHCHR &= ~UHCHR_SSE; + UHCHIE = (UHCHIE_UPRIE | UHCHIE_RWIE); + + /* Clear any OTG Pin Hold */ + if (PSSR & PSSR_OTGPH) + PSSR |= PSSR_OTGPH; + + UHCRHDA &= ~(RH_A_NPS); + UHCRHDA |= RH_A_PSM; + + /* Set port power control mask bits, only 3 ports. */ + UHCRHDB |= (0x7<<17); +} + +void usb_board_init_fail(void) +{ + return; +} + +void usb_board_stop(void) +{ + UHCHR |= UHCHR_FHR; + udelay(11); + UHCHR &= ~UHCHR_FHR; + + UHCCOMS |= 1; + udelay(10); + + CKEN &= ~CKEN10_USBHOST; + + puts("Called USB STOP\n"); + return; +} + +int board_init (void) +{ + /* memory and cpu-speed are setup before relocation */ + /* so we do _nothing_ here */ + + /* arch number of ConXS Board */ + gd->bd->bi_arch_number = 776; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = 0xa000003c; + + return 0; +} + +int board_late_init(void) +{ +#if defined(CONFIG_SERIAL_MULTI) + char *console=getenv("boot_console"); + + if ((strcmp(console,"serial_btuart") == 0) || + (strcmp(console,"serial_stuart") == 0) || + (strcmp(console,"serial_ffuart") == 0)) { + setenv("stdout",console); + setenv("stdin", console); + setenv("stderr",console); + } else { + setenv("stdout", "serial"); + setenv("stdin", "serial"); + setenv("stderr", "serial"); + } +#endif + return 0; +} + +struct serial_device *default_serial_console (void) +{ + return &serial_ffuart_device; +} + +int dram_init (void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + gd->bd->bi_dram[1].start = PHYS_SDRAM_2; + gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; + gd->bd->bi_dram[2].start = PHYS_SDRAM_3; + gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE; + gd->bd->bi_dram[3].start = PHYS_SDRAM_4; + gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE; + + return 0; +} diff --git a/board/trizepsiv/eeprom.c b/board/trizepsiv/eeprom.c new file mode 100644 index 00000000000..3d3bc00221b --- /dev/null +++ b/board/trizepsiv/eeprom.c @@ -0,0 +1,85 @@ +/* + * (C) Copyright 2007 + * Stefano Babic, DENX Software Engineering, sbabic@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +static unsigned char srom[128]; +extern u16 read_srom_word(int); +extern void write_srom_word(int offset, u16 val); + +static int do_read_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { + int i; + + for (i=0; i < 0x40; i++) { + if (!(i % 0x10)) + printf("\n%08lx:", i); + printf(" %04x", read_srom_word(i)); + } + printf ("\n"); + return (0); +} + +static int do_write_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { + int offset,value; + + if (argc < 4) { + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + offset=simple_strtoul(argv[2],NULL,16); + value=simple_strtoul(argv[3],NULL,16); + if (offset > 0x40) { + printf("Wrong offset : 0x%x\n",offset); + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + write_srom_word(offset, value); + return (0); +} + +int do_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { + if (argc < 2) { + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + if (strcmp (argv[1],"read") == 0) { + return (do_read_dm9000_eeprom(cmdtp,flag,argc,argv)); + } else if (strcmp (argv[1],"write") == 0) { + return (do_write_dm9000_eeprom(cmdtp,flag,argc,argv)); + } else { + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } +} + +U_BOOT_CMD( + dm9000ee,4,1,do_dm9000_eeprom, + "dm9000ee- Read/Write eeprom connected to Ethernet Controller\n", + "\ndm9000ee write \n" + "\tdm9000ee read \n" + "\tword:\t\t00-02 : MAC Address\n" + "\t\t\t03-07 : DM9000 Configuration\n" + "\t\t\t08-63 : User data\n"); diff --git a/board/trizepsiv/lowlevel_init.S b/board/trizepsiv/lowlevel_init.S new file mode 100644 index 00000000000..d8869381acc --- /dev/null +++ b/board/trizepsiv/lowlevel_init.S @@ -0,0 +1,503 @@ +/* + * This was originally from the Lubbock u-boot port. + * + * Most of this taken from Redboot hal_platform_setup.h with cleanup + * + * NOTE: I haven't clean this up considerably, just enough to get it + * running. See hal_platform_setup.h for the source. See + * board/cradle/lowlevel_init.S for another PXA250 setup that is + * much cleaner. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +/* wait for coprocessor write complete */ + .macro CPWAIT reg + mrc p15,0,\reg,c2,c0,0 + mov \reg,\reg + sub pc,pc,#4 + .endm + + +/* + * Memory setup + */ + +.globl lowlevel_init +lowlevel_init: + + /* Set up GPIO pins first ----------------------------------------- */ + + ldr r0, =GPSR0 + ldr r1, =CFG_GPSR0_VAL + str r1, [r0] + + ldr r0, =GPSR1 + ldr r1, =CFG_GPSR1_VAL + str r1, [r0] + + ldr r0, =GPSR2 + ldr r1, =CFG_GPSR2_VAL + str r1, [r0] + + ldr r0, =GPSR3 + ldr r1, =CFG_GPSR3_VAL + str r1, [r0] + + ldr r0, =GPCR0 + ldr r1, =CFG_GPCR0_VAL + str r1, [r0] + + ldr r0, =GPCR1 + ldr r1, =CFG_GPCR1_VAL + str r1, [r0] + + ldr r0, =GPCR2 + ldr r1, =CFG_GPCR2_VAL + str r1, [r0] + + ldr r0, =GPCR3 + ldr r1, =CFG_GPCR3_VAL + str r1, [r0] + + ldr r0, =GRER0 + ldr r1, =CFG_GRER0_VAL + str r1, [r0] + + ldr r0, =GRER1 + ldr r1, =CFG_GRER1_VAL + str r1, [r0] + + ldr r0, =GRER2 + ldr r1, =CFG_GRER2_VAL + str r1, [r0] + + ldr r0, =GRER3 + ldr r1, =CFG_GRER3_VAL + str r1, [r0] + + ldr r0, =GFER0 + ldr r1, =CFG_GFER0_VAL + str r1, [r0] + + ldr r0, =GFER1 + ldr r1, =CFG_GFER1_VAL + str r1, [r0] + + ldr r0, =GFER2 + ldr r1, =CFG_GFER2_VAL + str r1, [r0] + + ldr r0, =GFER3 + ldr r1, =CFG_GFER3_VAL + str r1, [r0] + + ldr r0, =GPDR0 + ldr r1, =CFG_GPDR0_VAL + str r1, [r0] + + ldr r0, =GPDR1 + ldr r1, =CFG_GPDR1_VAL + str r1, [r0] + + ldr r0, =GPDR2 + ldr r1, =CFG_GPDR2_VAL + str r1, [r0] + + ldr r0, =GPDR3 + ldr r1, =CFG_GPDR3_VAL + str r1, [r0] + + ldr r0, =GAFR0_L + ldr r1, =CFG_GAFR0_L_VAL + str r1, [r0] + + ldr r0, =GAFR0_U + ldr r1, =CFG_GAFR0_U_VAL + str r1, [r0] + + ldr r0, =GAFR1_L + ldr r1, =CFG_GAFR1_L_VAL + str r1, [r0] + + ldr r0, =GAFR1_U + ldr r1, =CFG_GAFR1_U_VAL + str r1, [r0] + + ldr r0, =GAFR2_L + ldr r1, =CFG_GAFR2_L_VAL + str r1, [r0] + + ldr r0, =GAFR2_U + ldr r1, =CFG_GAFR2_U_VAL + str r1, [r0] + + ldr r0, =GAFR3_L + ldr r1, =CFG_GAFR3_L_VAL + str r1, [r0] + + ldr r0, =GAFR3_U + ldr r1, =CFG_GAFR3_U_VAL + str r1, [r0] + + ldr r0, =PSSR /* enable GPIO pins */ + ldr r1, =CFG_PSSR_VAL + str r1, [r0] + + /* ---------------------------------------------------------------- */ + /* Enable memory interface */ + /* */ + /* The sequence below is based on the recommended init steps */ + /* detailed in the Intel PXA250 Operating Systems Developers Guide, */ + /* Chapter 10. */ + /* ---------------------------------------------------------------- */ + + /* ---------------------------------------------------------------- */ + /* Step 1: Wait for at least 200 microsedonds to allow internal */ + /* clocks to settle. Only necessary after hard reset... */ + /* FIXME: can be optimized later */ + /* ---------------------------------------------------------------- */ + + ldr r3, =OSCR /* reset the OS Timer Count to zero */ + mov r2, #0 + str r2, [r3] + ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ + /* so 0x300 should be plenty */ +1: + ldr r2, [r3] + cmp r4, r2 + bgt 1b + +mem_init: + + ldr r1, =MEMC_BASE /* get memory controller base addr. */ + + /* ---------------------------------------------------------------- */ + /* Step 2a: Initialize Asynchronous static memory controller */ + /* ---------------------------------------------------------------- */ + + /* MSC registers: timing, bus width, mem type */ + + /* MSC0: nCS(0,1) */ + ldr r2, =CFG_MSC0_VAL + str r2, [r1, #MSC0_OFFSET] + ldr r2, [r1, #MSC0_OFFSET] /* read back to ensure */ + /* that data latches */ + /* MSC1: nCS(2,3) */ + ldr r2, =CFG_MSC1_VAL + str r2, [r1, #MSC1_OFFSET] + ldr r2, [r1, #MSC1_OFFSET] + + /* MSC2: nCS(4,5) */ + ldr r2, =CFG_MSC2_VAL + str r2, [r1, #MSC2_OFFSET] + ldr r2, [r1, #MSC2_OFFSET] + + /* ---------------------------------------------------------------- */ + /* Step 2b: Initialize Card Interface */ + /* ---------------------------------------------------------------- */ + + /* MECR: Memory Expansion Card Register */ + ldr r2, =CFG_MECR_VAL + str r2, [r1, #MECR_OFFSET] + ldr r2, [r1, #MECR_OFFSET] + + /* MCMEM0: Card Interface slot 0 timing */ + ldr r2, =CFG_MCMEM0_VAL + str r2, [r1, #MCMEM0_OFFSET] + ldr r2, [r1, #MCMEM0_OFFSET] + + /* MCMEM1: Card Interface slot 1 timing */ + ldr r2, =CFG_MCMEM1_VAL + str r2, [r1, #MCMEM1_OFFSET] + ldr r2, [r1, #MCMEM1_OFFSET] + + /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ + ldr r2, =CFG_MCATT0_VAL + str r2, [r1, #MCATT0_OFFSET] + ldr r2, [r1, #MCATT0_OFFSET] + + /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ + ldr r2, =CFG_MCATT1_VAL + str r2, [r1, #MCATT1_OFFSET] + ldr r2, [r1, #MCATT1_OFFSET] + + /* MCIO0: Card Interface I/O Space Timing, slot 0 */ + ldr r2, =CFG_MCIO0_VAL + str r2, [r1, #MCIO0_OFFSET] + ldr r2, [r1, #MCIO0_OFFSET] + + /* MCIO1: Card Interface I/O Space Timing, slot 1 */ + ldr r2, =CFG_MCIO1_VAL + str r2, [r1, #MCIO1_OFFSET] + ldr r2, [r1, #MCIO1_OFFSET] + + /* ---------------------------------------------------------------- */ + /* Step 2c: Write FLYCNFG FIXME: what's that??? */ + /* ---------------------------------------------------------------- */ + ldr r2, =CFG_FLYCNFG_VAL + str r2, [r1, #FLYCNFG_OFFSET] + str r2, [r1, #FLYCNFG_OFFSET] + + /* ---------------------------------------------------------------- */ + /* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */ + /* ---------------------------------------------------------------- */ + + /* Before accessing MDREFR we need a valid DRI field, so we set */ + /* this to power on defaults + DRI field. */ + + ldr r4, [r1, #MDREFR_OFFSET] + ldr r2, =0xFFF + bic r4, r4, r2 + + ldr r3, =CFG_MDREFR_VAL + and r3, r3, r2 + + orr r4, r4, r3 + str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + + orr r4, r4, #MDREFR_K0RUN + orr r4, r4, #MDREFR_K0DB4 + orr r4, r4, #MDREFR_K0FREE + orr r4, r4, #MDREFR_K0DB2 + orr r4, r4, #MDREFR_K1DB2 + bic r4, r4, #MDREFR_K1FREE + bic r4, r4, #MDREFR_K2FREE + + str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + ldr r4, [r1, #MDREFR_OFFSET] + + /* Note: preserve the mdrefr value in r4 */ + + + /* ---------------------------------------------------------------- */ + /* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */ + /* ---------------------------------------------------------------- */ + + /* Initialize SXCNFG register. Assert the enable bits */ + + /* Write SXMRS to cause an MRS command to all enabled banks of */ + /* synchronous static memory. Note that SXLCR need not be written */ + /* at this time. */ + + ldr r2, =CFG_SXCNFG_VAL + str r2, [r1, #SXCNFG_OFFSET] + + /* ---------------------------------------------------------------- */ + /* Step 4: Initialize SDRAM */ + /* ---------------------------------------------------------------- */ + + bic r4, r4, #(MDREFR_K2FREE |MDREFR_K1FREE | MDREFR_K0FREE) + + orr r4, r4, #MDREFR_K1RUN + bic r4, r4, #MDREFR_K2DB2 + str r4, [r1, #MDREFR_OFFSET] + ldr r4, [r1, #MDREFR_OFFSET] + + bic r4, r4, #MDREFR_SLFRSH + str r4, [r1, #MDREFR_OFFSET] + ldr r4, [r1, #MDREFR_OFFSET] + + orr r4, r4, #MDREFR_E1PIN + str r4, [r1, #MDREFR_OFFSET] + ldr r4, [r1, #MDREFR_OFFSET] + + nop + nop + + + /* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to */ + /* configure but not enable each SDRAM partition pair. */ + + ldr r4, =CFG_MDCNFG_VAL + bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1) + bic r4, r4, #(MDCNFG_DE2|MDCNFG_DE3) + + str r4, [r1, #MDCNFG_OFFSET] /* write back MDCNFG */ + ldr r4, [r1, #MDCNFG_OFFSET] + + + /* Step 4e: Wait for the clock to the SDRAMs to stabilize, */ + /* 100..200 µsec. */ + + ldr r3, =OSCR /* reset the OS Timer Count to zero */ + mov r2, #0 + str r2, [r3] + ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ + /* so 0x300 should be plenty */ +1: + ldr r2, [r3] + cmp r4, r2 + bgt 1b + + + /* Step 4f: Trigger a number (usually 8) refresh cycles by */ + /* attempting non-burst read or write accesses to disabled */ + /* SDRAM, as commonly specified in the power up sequence */ + /* documented in SDRAM data sheets. The address(es) used */ + /* for this purpose must not be cacheable. */ + + ldr r3, =CFG_DRAM_BASE + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + + + /* Step 4g: Write MDCNFG with enable bits asserted */ + /* (MDCNFG:DEx set to 1). */ + + ldr r3, [r1, #MDCNFG_OFFSET] + mov r4, r3 + orr r3, r3, #MDCNFG_DE0 + str r3, [r1, #MDCNFG_OFFSET] + mov r0, r3 + + /* Step 4h: Write MDMRS. */ + + ldr r2, =CFG_MDMRS_VAL + str r2, [r1, #MDMRS_OFFSET] + + /* enable APD */ + ldr r3, [r1, #MDREFR_OFFSET] + orr r3, r3, #MDREFR_APD + str r3, [r1, #MDREFR_OFFSET] + + /* We are finished with Intel's memory controller initialisation */ + + +setvoltage: + + mov r10, lr + bl initPXAvoltage /* In case the board is rebooting with a */ + mov lr, r10 /* low voltage raise it up to a good one. */ + +#if 1 + b initirqs +#endif + +wakeup: + /* Are we waking from sleep? */ + ldr r0, =RCSR + ldr r1, [r0] + and r1, r1, #(RCSR_GPR | RCSR_SMR | RCSR_WDR | RCSR_HWR) + str r1, [r0] + teq r1, #RCSR_SMR + + bne initirqs + + ldr r0, =PSSR + mov r1, #PSSR_PH + str r1, [r0] + + /* if so, resume at PSPR */ + ldr r0, =PSPR + ldr r1, [r0] + mov pc, r1 + + /* ---------------------------------------------------------------- */ + /* Disable (mask) all interrupts at interrupt controller */ + /* ---------------------------------------------------------------- */ + +initirqs: + + mov r1, #0 /* clear int. level register (IRQ, not FIQ) */ + ldr r2, =ICLR + str r1, [r2] + + ldr r2, =ICMR /* mask all interrupts at the controller */ + str r1, [r2] + + /* ---------------------------------------------------------------- */ + /* Clock initialisation */ + /* ---------------------------------------------------------------- */ + +initclks: + + /* Disable the peripheral clocks, and set the core clock frequency */ + + /* Turn Off on-chip peripheral clocks (except for memory) */ + /* for re-configuration. */ + ldr r1, =CKEN + ldr r2, =CFG_CKEN + str r2, [r1] + + /* ... and write the core clock config register */ + ldr r2, =CFG_CCCR + ldr r1, =CCCR + str r2, [r1] + + /* Turn on turbo mode */ + mrc p14, 0, r2, c6, c0, 0 + orr r2, r2, #0xB /* Turbo, Fast-Bus, Freq change**/ + mcr p14, 0, r2, c6, c0, 0 + + /* Re-write MDREFR */ + ldr r1, =MEMC_BASE + ldr r2, [r1, #MDREFR_OFFSET] + str r2, [r1, #MDREFR_OFFSET] +#ifdef RTC + /* enable the 32Khz oscillator for RTC and PowerManager */ + ldr r1, =OSCC + mov r2, #OSCC_OON + str r2, [r1] + + /* NOTE: spin here until OSCC.OOK get set, meaning the PLL */ + /* has settled. */ +60: + ldr r2, [r1] + ands r2, r2, #1 + beq 60b +#else +#error "RTC not defined" +#endif + + /* Interrupt init: Mask all interrupts */ + ldr r0, =ICMR /* enable no sources */ + mov r1, #0 + str r1, [r0] + /* FIXME */ + +#ifdef NODEBUG + /*Disable software and data breakpoints */ + mov r0,#0 + mcr p15,0,r0,c14,c8,0 /* ibcr0 */ + mcr p15,0,r0,c14,c9,0 /* ibcr1 */ + mcr p15,0,r0,c14,c4,0 /* dbcon */ + + /*Enable all debug functionality */ + mov r0,#0x80000000 + mcr p14,0,r0,c10,c0,0 /* dcsr */ +#endif + + /* ---------------------------------------------------------------- */ + /* End lowlevel_init */ + /* ---------------------------------------------------------------- */ + +endlowlevel_init: + + mov pc, lr diff --git a/board/trizepsiv/pxavoltage.S b/board/trizepsiv/pxavoltage.S new file mode 100644 index 00000000000..5e411321f30 --- /dev/null +++ b/board/trizepsiv/pxavoltage.S @@ -0,0 +1,31 @@ +/* + * (C) Copyright 2007 + * Stefano Babic, DENX Gmbh, sbabic@denx.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + + + .global initPXAvoltage + +initPXAvoltage: + mov pc, lr + diff --git a/board/trizepsiv/u-boot.lds b/board/trizepsiv/u-boot.lds new file mode 100644 index 00000000000..f0102391b34 --- /dev/null +++ b/board/trizepsiv/u-boot.lds @@ -0,0 +1,56 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/pxa/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/drivers/dm9000x.c b/drivers/dm9000x.c index e0d531bd917..6131b5c3570 100644 --- a/drivers/dm9000x.c +++ b/drivers/dm9000x.c @@ -99,7 +99,7 @@ void eth_halt(void); static int dm9000_probe(void); static u16 phy_read(int); static void phy_write(int, u16); -static u16 read_srom_word(int); +u16 read_srom_word(int); static u8 DM9000_ior(int); static void DM9000_iow(int reg, u8 value); @@ -537,7 +537,7 @@ eth_rx(void) /* Read a word data from SROM */ -static u16 +u16 read_srom_word(int offset) { DM9000_iow(DM9000_EPAR, offset); @@ -547,6 +547,18 @@ read_srom_word(int offset) return (DM9000_ior(DM9000_EPDRL) + (DM9000_ior(DM9000_EPDRH) << 8)); } +void +write_srom_word(int offset, u16 val) +{ + DM9000_iow(DM9000_EPAR, offset); + DM9000_iow(DM9000_EPDRH, ((val >> 8) & 0xff)); + DM9000_iow(DM9000_EPDRL, (val & 0xff)); + DM9000_iow(DM9000_EPCR, 0x12); + udelay(8000); + DM9000_iow(DM9000_EPCR, 0); +} + + /* Read a byte from I/O port */ diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h new file mode 100644 index 00000000000..84998d4392a --- /dev/null +++ b/include/configs/trizepsiv.h @@ -0,0 +1,325 @@ +/* + * (C) Copyright 2007 + * Stefano Babic, DENX Gmbh, sbabic@denx.de + * + * (C) Copyright 2004 + * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net + * + * (C) Copyright 2002 + * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH + * Marius Groeger + * + * Configuation settings for the LUBBOCK board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_PXA27X 1 /* This is an PXA27x CPU */ + +#define LITTLEENDIAN 1 /* used by usb_ohci.c */ + +#define CONFIG_MMC 1 +#define BOARD_LATE_INIT 1 + +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +#define RTC + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* + * Hardware drivers + */ + +/* + * select serial console configuration + */ +#define CONFIG_SERIAL_MULTI +#define CONFIG_FFUART 1 /* we use FFUART on Conxs */ +#define CONFIG_BTUART 1 /* we use BTUART on Conxs */ +#define CONFIG_STUART 1 /* we use STUART on Conxs */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 38400 + +#define CONFIG_DOS_PARTITION 1 + +/* + * Command line configuration. + */ +#include + +#define CONFIG_CMD_MMC +#define CONFIG_CMD_FAT +#define CONFIG_CMD_IMLS +#define CONFIG_CMD_PING +#define CONFIG_CMD_USB + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ + +#undef CONFIG_SHOW_BOOT_PROGRESS + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_SERVERIP 192.168.1.99 +#define CONFIG_BOOTCOMMAND "run boot_flash" +#define CONFIG_BOOTARGS "console=ttyS0,38400 ramdisk_size=12288"\ + " rw root=/dev/ram initrd=0xa0800000,5m" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "program_boot_mmc=" \ + "mw.b 0xa0010000 0xff 0x20000; " \ + "if mmcinit && " \ + "fatload mmc 0 0xa0010000 u-boot.bin; " \ + "then " \ + "protect off 0x0 0x1ffff; " \ + "erase 0x0 0x1ffff; " \ + "cp.b 0xa0010000 0x0 0x20000; " \ + "fi\0" \ + "program_uzImage_mmc=" \ + "mw.b 0xa0010000 0xff 0x180000; " \ + "if mmcinit && " \ + "fatload mmc 0 0xa0010000 uzImage; " \ + "then " \ + "protect off 0x40000 0x1bffff; " \ + "erase 0x40000 0x1bffff; " \ + "cp.b 0xa0010000 0x40000 0x180000; " \ + "fi\0" \ + "program_ramdisk_mmc=" \ + "mw.b 0xa0010000 0xff 0x500000; " \ + "if mmcinit && " \ + "fatload mmc 0 0xa0010000 ramdisk.gz; " \ + "then " \ + "protect off 0x1c0000 0x6bffff; " \ + "erase 0x1c0000 0x6bffff; " \ + "cp.b 0xa0010000 0x1c0000 0x500000; " \ + "fi\0" \ + "boot_mmc=" \ + "if mmcinit && " \ + "fatload mmc 0 0xa0030000 uzImage && " \ + "fatload mmc 0 0xa0800000 ramdisk.gz; " \ + "then " \ + "bootm 0xa0030000; " \ + "fi\0" \ + "boot_flash=" \ + "cp.b 0x1c0000 0xa0800000 0x500000; " \ + "bootm 0x40000\0" \ + +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +/* #define CONFIG_INITRD_TAG 1 */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_HUSH_PARSER 1 +#define CFG_PROMPT_HUSH_PS2 "> " + +#define CFG_LONGHELP /* undef to save memory */ +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT "$ " /* Monitor Command Prompt */ +#else +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#endif +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_DEVICE_NULLDEV 1 + +#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0xa1000000 /* default load address */ + +#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ +#define CFG_CPUSPEED 0x207 /* need to look more closely, I think this is Turbo = 2x, L=91Mhz */ + + /* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CFG_MMC_BASE 0xF0000000 + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ +#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ +#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ +#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ +#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ +#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ +#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ +#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ + +#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ + +#define CFG_DRAM_BASE 0xa0000000 +#define CFG_DRAM_SIZE 0x04000000 + +#define CFG_FLASH_BASE PHYS_FLASH_1 + +/* + * GPIO settings + */ +#define CFG_GPSR0_VAL 0x00018000 +#define CFG_GPSR1_VAL 0x00000000 +#define CFG_GPSR2_VAL 0x400dc000 +#define CFG_GPSR3_VAL 0x00000000 +#define CFG_GPCR0_VAL 0x00000000 +#define CFG_GPCR1_VAL 0x00000000 +#define CFG_GPCR2_VAL 0x00000000 +#define CFG_GPCR3_VAL 0x00000000 +#define CFG_GPDR0_VAL 0x00018000 +#define CFG_GPDR1_VAL 0x00028801 +#define CFG_GPDR2_VAL 0x520dc000 +#define CFG_GPDR3_VAL 0x0001E000 +#define CFG_GAFR0_L_VAL 0x801c0000 +#define CFG_GAFR0_U_VAL 0x00000013 +#define CFG_GAFR1_L_VAL 0x6990100A +#define CFG_GAFR1_U_VAL 0x00000008 +#define CFG_GAFR2_L_VAL 0xA0000000 +#define CFG_GAFR2_U_VAL 0x010900F2 +#define CFG_GAFR3_L_VAL 0x54000003 +#define CFG_GAFR3_U_VAL 0x00002401 +#define CFG_GRER0_VAL 0x00000000 +#define CFG_GRER1_VAL 0x00000000 +#define CFG_GRER2_VAL 0x00000000 +#define CFG_GRER3_VAL 0x00000000 +#define CFG_GFER0_VAL 0x00000000 +#define CFG_GFER1_VAL 0x00000000 +#define CFG_GFER2_VAL 0x00000000 +#define CFG_GFER3_VAL 0x00000020 + + +#define CFG_PSSR_VAL 0x20 /* CHECK */ + +/* + * Clock settings + */ +#define CFG_CKEN 0x01FFFFFF /* CHECK */ +#define CFG_CCCR 0x02000290 /* 520Mhz */ + +/* + * Memory settings + */ + +#define CFG_MSC0_VAL 0x4df84df0 +#define CFG_MSC1_VAL 0x7ff87ff4 +#define CFG_MSC2_VAL 0xa26936d4 +#define CFG_MDCNFG_VAL 0x880009C9 +#define CFG_MDREFR_VAL 0x20ca201e +#define CFG_MDMRS_VAL 0x00220022 + +#define CFG_FLYCNFG_VAL 0x00000000 +#define CFG_SXCNFG_VAL 0x40044004 + +/* + * PCMCIA and CF Interfaces + */ +#define CFG_MECR_VAL 0x00000001 +#define CFG_MCMEM0_VAL 0x00004204 +#define CFG_MCMEM1_VAL 0x00010204 +#define CFG_MCATT0_VAL 0x00010504 +#define CFG_MCATT1_VAL 0x00010504 +#define CFG_MCIO0_VAL 0x00008407 +#define CFG_MCIO1_VAL 0x0000c108 + +#define CONFIG_DRIVER_DM9000 1 +#define CONFIG_DRIVER_DM9000 1 +#define CONFIG_DM9000_BASE 0x08000000 +#define DM9000_IO CONFIG_DM9000_BASE +#define DM9000_DATA (CONFIG_DM9000_BASE+0x8004) +/* #define CONFIG_DM9000_USE_8BIT */ +/* #define CONFIG_DM9000_USE_16BIT */ +#define CONFIG_DM9000_USE_32BIT + +#define CONFIG_USB_OHCI_NEW 1 +#define CFG_USB_OHCI_BOARD_INIT 1 +#define CFG_USB_OHCI_MAX_ROOT_PORTS 3 +#define CFG_USB_OHCI_REGS_BASE 0x4C000000 +#define CFG_USB_OHCI_SLOT_NAME "trizepsiv" +#define CONFIG_USB_STORAGE 1 +#define CFG_USB_OHCI_CPU_INIT 1 + +/* + * FLASH and environment organization + */ + +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER 1 + +#define CFG_MONITOR_BASE 0 +#define CFG_MONITOR_LEN 0x40000 + +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 4 + 255 /* max number of sectors on one chip */ + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */ + +/* write flash less slowly */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 + +/* Flash environment locations */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR (PHYS_FLASH_1 + CFG_MONITOR_LEN) /* Addr of Environment Sector */ +#define CFG_ENV_SIZE 0x40000 /* Total Size of Environment */ +#define CFG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR+CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +#endif /* __CONFIG_H */ -- cgit v1.3.1 From 7f1913938984ef6c6a46cb53e003719196d9c5de Mon Sep 17 00:00:00 2001 From: Grzegorz Bernacki Date: Fri, 7 Sep 2007 18:20:23 +0200 Subject: [PPC440SPe] Improve PCIe configuration space access - correct configuration space mapping - correct bus numbering - better access to config space Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the first device on the first bus. We now allow to configure up to 16 buses; also, scanning for devices behind the PCIe-PCIe bridge is supported, so peripheral devices farther in hierarchy can be identified. Signed-off-by: Grzegorz Bernacki --- board/amcc/katmai/init.S | 12 ++--- board/amcc/katmai/katmai.c | 9 ++-- board/amcc/yucca/init.S | 12 ++--- board/amcc/yucca/yucca.c | 9 ++-- cpu/ppc4xx/405gp_pci.c | 17 ++++--- cpu/ppc4xx/440spe_pcie.c | 111 +++++++++++++++++++++++++++++++++++---------- include/common.h | 2 +- include/configs/katmai.h | 10 ++-- include/configs/yucca.h | 10 ++-- 9 files changed, 130 insertions(+), 62 deletions(-) (limited to 'include/configs') diff --git a/board/amcc/katmai/init.S b/board/amcc/katmai/init.S index 5202ae694ce..e3f3da6bd84 100644 --- a/board/amcc/katmai/init.S +++ b/board/amcc/katmai/init.S @@ -67,9 +67,9 @@ tlbtabA: tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE_BASE, SZ_16K, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_PCIE0_CFGBASE, SZ_1K, 0x40000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_PCIE1_CFGBASE, SZ_1K, 0x80000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_PCIE2_CFGBASE, SZ_1K, 0xC0000000, 0xC, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE0_CFGBASE, SZ_16M, 0x40000000, 0xC, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE1_CFGBASE, SZ_16M, 0x80000000, 0xC, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE2_CFGBASE, SZ_16M, 0xC0000000, 0xC, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x50000000, 0xC, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x90000000, 0xC, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE2_XCFGBASE, SZ_1K, 0xD0000000, 0xC, AC_R|AC_W|SA_G|SA_I) @@ -109,9 +109,9 @@ tlbtabB: tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_PCIE0_CFGBASE, SZ_1K, 0x00100000, 0xD, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_PCIE1_CFGBASE, SZ_1K, 0x20100000, 0xD, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_PCIE2_CFGBASE, SZ_1K, 0x40100000, 0xD, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE2_CFGBASE, SZ_16M, 0x40000000, 0xD, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE2_XCFGBASE, SZ_1K, 0x50000000, 0xD, AC_R|AC_W|SA_G|SA_I) diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c index b804d55f2e7..a9ae4a37392 100644 --- a/board/amcc/katmai/katmai.c +++ b/board/amcc/katmai/katmai.c @@ -392,7 +392,7 @@ int katmai_pcie_card_present(int port) static struct pci_controller pcie_hose[3] = {{0},{0},{0}}; -void pcie_setup_hoses(void) +void pcie_setup_hoses(int busno) { struct pci_controller *hose; int i, bus; @@ -401,7 +401,7 @@ void pcie_setup_hoses(void) * assume we're called after the PCIX hose is initialized, which takes * bus ID 0 and therefore start numbering PCIe's from 1. */ - bus = 1; + bus = busno; for (i = 0; i <= 2; i++) { /* Check for katmai card presence */ if (!katmai_pcie_card_present(i)) @@ -418,8 +418,8 @@ void pcie_setup_hoses(void) hose = &pcie_hose[i]; hose->first_busno = bus; - hose->last_busno = bus; - bus++; + hose->last_busno = bus; + hose->current_busno = bus; /* setup mem resource */ pci_set_region(hose->regions + 0, @@ -443,6 +443,7 @@ void pcie_setup_hoses(void) * Config access can only go down stream */ hose->last_busno = pci_hose_scan(hose); + bus = hose->last_busno + 1; #endif } } diff --git a/board/amcc/yucca/init.S b/board/amcc/yucca/init.S index c92dcf7a514..67e8f8f3a2c 100644 --- a/board/amcc/yucca/init.S +++ b/board/amcc/yucca/init.S @@ -70,9 +70,9 @@ tlbtabA: tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE_BASE, SZ_16K, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_PCIE0_CFGBASE, SZ_1K, 0x40000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_PCIE1_CFGBASE, SZ_1K, 0x80000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_PCIE2_CFGBASE, SZ_1K, 0xC0000000, 0xC, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE0_CFGBASE, SZ_16M, 0x40000000, 0xC, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE1_CFGBASE, SZ_16M, 0x80000000, 0xC, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE2_CFGBASE, SZ_16M, 0xC0000000, 0xC, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x50000000, 0xC, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x90000000, 0xC, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE2_XCFGBASE, SZ_1K, 0xD0000000, 0xC, AC_R|AC_W|SA_G|SA_I) @@ -112,9 +112,9 @@ tlbtabB: tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_PCIE0_CFGBASE, SZ_1K, 0x00100000, 0xD, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_PCIE1_CFGBASE, SZ_1K, 0x20100000, 0xD, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_PCIE2_CFGBASE, SZ_1K, 0x40100000, 0xD, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE2_CFGBASE, SZ_16M, 0x40000000, 0xD, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCIE2_XCFGBASE, SZ_1K, 0x50000000, 0xD, AC_R|AC_W|SA_G|SA_I) diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c index d08fcf3565f..252e4fe07a6 100644 --- a/board/amcc/yucca/yucca.c +++ b/board/amcc/yucca/yucca.c @@ -846,7 +846,7 @@ void yucca_setup_pcie_fpga_endpoint(int port) static struct pci_controller pcie_hose[3] = {{0},{0},{0}}; -void pcie_setup_hoses(void) +void pcie_setup_hoses(int busno) { struct pci_controller *hose; int i, bus; @@ -855,7 +855,7 @@ void pcie_setup_hoses(void) * assume we're called after the PCIX hose is initialized, which takes * bus ID 0 and therefore start numbering PCIe's from 1. */ - bus = 1; + bus = busno; for (i = 0; i <= 2; i++) { /* Check for yucca card presence */ if (!yucca_pcie_card_present(i)) @@ -874,8 +874,8 @@ void pcie_setup_hoses(void) hose = &pcie_hose[i]; hose->first_busno = bus; - hose->last_busno = bus; - bus++; + hose->last_busno = bus; + hose->current_busno = bus; /* setup mem resource */ pci_set_region(hose->regions + 0, @@ -899,6 +899,7 @@ void pcie_setup_hoses(void) * Config access can only go down stream */ hose->last_busno = pci_hose_scan(hose); + bus = hose->last_busno + 1; #endif } } diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c index 28379298b72..282e7a1ba47 100644 --- a/cpu/ppc4xx/405gp_pci.c +++ b/cpu/ppc4xx/405gp_pci.c @@ -443,7 +443,7 @@ void pci_init_board(void) static struct pci_controller ppc440_hose = {0}; -void pci_440_init (struct pci_controller *hose) +int pci_440_init (struct pci_controller *hose) { int reg_num = 0; @@ -459,7 +459,7 @@ void pci_440_init (struct pci_controller *hose) if ((strap & SDR0_SDSTP1_PISE_MASK) == 0) { printf("PCI: SDR0_STRP1[PISE] not set.\n"); printf("PCI: Configuration aborted.\n"); - return; + return -1; } #elif defined(CONFIG_440GP) unsigned long strap; @@ -468,7 +468,7 @@ void pci_440_init (struct pci_controller *hose) if ((strap & CPC0_STRP1_PISE_MASK) == 0) { printf("PCI: CPC0_STRP1[PISE] not set.\n"); printf("PCI: Configuration aborted.\n"); - return; + return -1; } #endif #endif /* CONFIG_DISABLE_PISE_TEST */ @@ -477,7 +477,7 @@ void pci_440_init (struct pci_controller *hose) * PCI controller init *--------------------------------------------------------------------------*/ hose->first_busno = 0; - hose->last_busno = 0xff; + hose->last_busno = 0; /* PCI I/O space */ pci_set_region(hose->regions + reg_num++, @@ -515,7 +515,7 @@ void pci_440_init (struct pci_controller *hose) if (pci_pre_init (hose) == 0) { printf("PCI: Board-specific initialization failed.\n"); printf("PCI: Configuration aborted.\n"); - return; + return -1; } pci_register_hose( hose ); @@ -578,13 +578,16 @@ void pci_440_init (struct pci_controller *hose) #endif hose->last_busno = pci_hose_scan(hose); } + return hose->last_busno; } void pci_init_board(void) { - pci_440_init (&ppc440_hose); + int busno; + + busno = pci_440_init (&ppc440_hose); #if defined(CONFIG_440SPE) - pcie_setup_hoses(); + pcie_setup_hoses(busno + 1); #endif } diff --git a/cpu/ppc4xx/440spe_pcie.c b/cpu/ppc4xx/440spe_pcie.c index 2d0b4067af7..158f1c55957 100644 --- a/cpu/ppc4xx/440spe_pcie.c +++ b/cpu/ppc4xx/440spe_pcie.c @@ -40,6 +40,23 @@ enum { LNKW_X8 = 0x8 }; +static u8* pcie_get_base(struct pci_controller *hose, unsigned int devfn) +{ + u8 *base = (u8*)hose->cfg_data; + + /* use local configuration space for the first bus */ + if (PCI_BUS(devfn) == 0) { + if (hose->cfg_data == (u8*)CFG_PCIE0_CFGBASE) + base = (u8*)CFG_PCIE0_XCFGBASE; + if (hose->cfg_data == (u8*)CFG_PCIE1_CFGBASE) + base = (u8*)CFG_PCIE1_XCFGBASE; + if (hose->cfg_data == (u8*)CFG_PCIE2_CFGBASE) + base = (u8*)CFG_PCIE2_XCFGBASE; + } + + return base; +} + static void pcie_dmer_disable(void) { mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE), @@ -60,18 +77,35 @@ static void pcie_dmer_enable(void) mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE)) & ~GPL_DMER_MASK_DISA); } - static int pcie_read_config(struct pci_controller *hose, unsigned int devfn, int offset, int len, u32 *val) { + u8 *address; *val = 0; + + /* + * Bus numbers are relative to hose->first_busno + */ + devfn -= PCI_BDF(hose->first_busno, 0, 0); + /* - * 440SPE implements only one function per port + * NOTICE: configuration space ranges are currenlty mapped only for + * the first 16 buses, so such limit must be imposed. In case more + * buses are required the TLB settings in board/amcc//init.S + * need to be altered accordingly (one bus takes 1 MB of memory space). */ - if (!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 1))) + if (PCI_BUS(devfn) >= 16) return 0; - devfn = PCI_BDF(0,0,0); + /* + * Only single device/single function is supported for the primary and + * secondary buses of the 440SPe host bridge. + */ + if ((!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 0))) && + ((PCI_BUS(devfn) == 0) || (PCI_BUS(devfn) == 1))) + return 0; + + address = pcie_get_base(hose, devfn); offset += devfn << 4; /* @@ -101,13 +135,24 @@ static int pcie_read_config(struct pci_controller *hose, unsigned int devfn, static int pcie_write_config(struct pci_controller *hose, unsigned int devfn, int offset, int len, u32 val) { + u8 *address; + /* - * 440SPE implements only one function per port + * Bus numbers are relative to hose->first_busno */ - if (!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 1))) + devfn -= PCI_BDF(hose->first_busno, 0, 0); + + /* + * Same constraints as in pcie_read_config(). + */ + if (PCI_BUS(devfn) >= 16) return 0; - devfn = PCI_BDF(0,0,0); + if ((!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 0))) && + ((PCI_BUS(devfn) == 0) || (PCI_BUS(devfn) == 1))) + return 0; + + address = pcie_get_base(hose, devfn); offset += devfn << 4; /* @@ -137,7 +182,7 @@ int pcie_read_config_byte(struct pci_controller *hose,pci_dev_t dev,int offset,u u32 v; int rv; - rv = pcie_read_config(hose, dev, offset, 1, &v); + rv = pcie_read_config(hose, dev, offset, 1, &v); *val = (u8)v; return rv; } @@ -794,12 +839,12 @@ void ppc440spe_setup_pcie_rootpoint(struct pci_controller *hose, int port) volatile void *rmbase = NULL; pci_set_ops(hose, - pcie_read_config_byte, - pcie_read_config_word, - pcie_read_config_dword, - pcie_write_config_byte, - pcie_write_config_word, - pcie_write_config_dword); + pcie_read_config_byte, + pcie_read_config_word, + pcie_read_config_dword, + pcie_write_config_byte, + pcie_write_config_word, + pcie_write_config_dword); switch (port) { case 0: @@ -822,14 +867,9 @@ void ppc440spe_setup_pcie_rootpoint(struct pci_controller *hose, int port) /* * Set bus numbers on our root port */ - if (ppc440spe_revB()) { - out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0); - out_8((u8 *)mbase + PCI_SECONDARY_BUS, 1); - out_8((u8 *)mbase + PCI_SUBORDINATE_BUS, 1); - } else { - out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0); - out_8((u8 *)mbase + PCI_SECONDARY_BUS, 0); - } + out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0); + out_8((u8 *)mbase + PCI_SECONDARY_BUS, 1); + out_8((u8 *)mbase + PCI_SUBORDINATE_BUS, 1); /* * Set up outbound translation to hose->mem_space from PLB @@ -886,6 +926,29 @@ void ppc440spe_setup_pcie_rootpoint(struct pci_controller *hose, int port) in_le16((u16 *)(mbase + PCI_COMMAND)) | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); printf("PCIE:%d successfully set as rootpoint\n",port); + + /* Set Device and Vendor Id */ + switch (port) { + case 0: + out_le16(mbase + 0x200, 0xaaa0); + out_le16(mbase + 0x202, 0xbed0); + break; + case 1: + out_le16(mbase + 0x200, 0xaaa1); + out_le16(mbase + 0x202, 0xbed1); + break; + case 2: + out_le16(mbase + 0x200, 0xaaa2); + out_le16(mbase + 0x202, 0xbed2); + break; + default: + out_le16(mbase + 0x200, 0xaaa3); + out_le16(mbase + 0x202, 0xbed3); + } + + /* Set Class Code to PCI-PCI bridge and Revision Id to 1 */ + out_le32(mbase + 0x208, 0x06040001); + } int ppc440spe_setup_pcie_endpoint(struct pci_controller *hose, int port) @@ -963,8 +1026,8 @@ int ppc440spe_setup_pcie_endpoint(struct pci_controller *hose, int port) /* Enable I/O, Mem, and Busmaster cycles */ out_le16((u16 *)(mbase + PCI_COMMAND), - in_le16((u16 *)(mbase + PCI_COMMAND)) | - PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + in_le16((u16 *)(mbase + PCI_COMMAND)) | + PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); out_le16(mbase + 0x200,0xcaad); /* Setting vendor ID */ out_le16(mbase + 0x202,0xfeed); /* Setting device ID */ attempts = 10; diff --git a/include/common.h b/include/common.h index 9a5a0ab7988..aca281bdad6 100644 --- a/include/common.h +++ b/include/common.h @@ -275,7 +275,7 @@ void pciinfo (int, int); # endif int is_pci_host (struct pci_controller *); #if defined(CONFIG_440SPE) - void pcie_setup_hoses(void); + void pcie_setup_hoses(int busno); #endif #endif diff --git a/include/configs/katmai.h b/include/configs/katmai.h index b6d0f519a82..7834e390846 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -66,11 +66,11 @@ #define CFG_PCIE_BASE 0xe0000000 /* PCIe UTL regs */ #define CFG_PCIE0_CFGBASE 0xc0000000 -#define CFG_PCIE0_XCFGBASE 0xc0000400 -#define CFG_PCIE1_CFGBASE 0xc0001000 -#define CFG_PCIE1_XCFGBASE 0xc0001400 -#define CFG_PCIE2_CFGBASE 0xc0002000 -#define CFG_PCIE2_XCFGBASE 0xc0002400 +#define CFG_PCIE1_CFGBASE 0xc1000000 +#define CFG_PCIE2_CFGBASE 0xc2000000 +#define CFG_PCIE0_XCFGBASE 0xc3000000 +#define CFG_PCIE1_XCFGBASE 0xc3001000 +#define CFG_PCIE2_XCFGBASE 0xc3002000 /* System RAM mapped to PCI space */ #define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE diff --git a/include/configs/yucca.h b/include/configs/yucca.h index 906f046fa7a..323535aa9fc 100644 --- a/include/configs/yucca.h +++ b/include/configs/yucca.h @@ -68,11 +68,11 @@ #define CFG_PCIE_BASE 0xe0000000 /* PCIe UTL regs */ #define CFG_PCIE0_CFGBASE 0xc0000000 -#define CFG_PCIE0_XCFGBASE 0xc0000400 -#define CFG_PCIE1_CFGBASE 0xc0001000 -#define CFG_PCIE1_XCFGBASE 0xc0001400 -#define CFG_PCIE2_CFGBASE 0xc0002000 -#define CFG_PCIE2_XCFGBASE 0xc0002400 +#define CFG_PCIE1_CFGBASE 0xc1000000 +#define CFG_PCIE2_CFGBASE 0xc2000000 +#define CFG_PCIE0_XCFGBASE 0xc3000000 +#define CFG_PCIE1_XCFGBASE 0xc3001000 +#define CFG_PCIE2_XCFGBASE 0xc3002000 /* System RAM mapped to PCI space */ #define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE -- cgit v1.3.1 From 6efc1fc0b63e55f94c5bc61d8dd23c918e3bc778 Mon Sep 17 00:00:00 2001 From: Grzegorz Bernacki Date: Fri, 7 Sep 2007 18:35:37 +0200 Subject: [PPC440SPe] PCIe environment settings for Katmai and Yucca - 'pciconfighost' is set by default in order to be able to scan bridges behind the primary host/PCIe - 'pciscandelay' env variable is recognized to allow for user-controlled delay before the PCIe bus enumeration; some peripheral devices require a significant delay before they can be scanned (e.g. LSI8408E); without the delay they are not detected Signed-off-by: Grzegorz Bernacki --- board/amcc/katmai/katmai.c | 12 ++++++++++++ board/amcc/yucca/yucca.c | 12 ++++++++++++ include/configs/katmai.h | 3 ++- include/configs/yucca.h | 3 ++- 4 files changed, 28 insertions(+), 2 deletions(-) (limited to 'include/configs') diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c index a9ae4a37392..afd60ece624 100644 --- a/board/amcc/katmai/katmai.c +++ b/board/amcc/katmai/katmai.c @@ -396,6 +396,8 @@ void pcie_setup_hoses(int busno) { struct pci_controller *hose; int i, bus; + char *env; + unsigned int delay; /* * assume we're called after the PCIX hose is initialized, which takes @@ -439,6 +441,16 @@ void pcie_setup_hoses(int busno) */ #else ppc440spe_setup_pcie_rootpoint(hose, i); + + env = getenv ("pciscandelay"); + if (env != NULL) { + delay = simple_strtoul (env, NULL, 10); + if (delay > 5) + printf ("Warning, expect noticable delay before PCIe" + "scan due to 'pciscandelay' value!\n"); + mdelay (delay * 1000); + } + /* * Config access can only go down stream */ diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c index 252e4fe07a6..397b01873f4 100644 --- a/board/amcc/yucca/yucca.c +++ b/board/amcc/yucca/yucca.c @@ -850,6 +850,8 @@ void pcie_setup_hoses(int busno) { struct pci_controller *hose; int i, bus; + char *env; + unsigned int delay; /* * assume we're called after the PCIX hose is initialized, which takes @@ -895,6 +897,16 @@ void pcie_setup_hoses(int busno) */ #else ppc440spe_setup_pcie_rootpoint(hose, i); + + env = getenv ("pciscandelay"); + if (env != NULL) { + delay = simple_strtoul (env, NULL, 10); + if (delay > 5) + printf ("Warning, expect noticable delay before PCIe" + "scan due to 'pciscandelay' value!\n"); + mdelay (delay * 1000); + } + /* * Config access can only go down stream */ diff --git a/include/configs/katmai.h b/include/configs/katmai.h index 7834e390846..7908e5a4743 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -201,6 +201,7 @@ "setenv filesize;saveenv\0" \ "upd=run load;run update\0" \ "kozio=bootm ffc60000\0" \ + "pciconfighost=1\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" @@ -322,7 +323,7 @@ #define CONFIG_PCI /* include pci support */ #define CONFIG_PCI_PNP 1 /* do pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ -#undef CONFIG_PCI_CONFIG_HOST_BRIDGE +#define CONFIG_PCI_CONFIG_HOST_BRIDGE /* Board-specific PCI */ #define CFG_PCI_TARGET_INIT /* let board init pci target */ diff --git a/include/configs/yucca.h b/include/configs/yucca.h index 323535aa9fc..74033b4aef4 100644 --- a/include/configs/yucca.h +++ b/include/configs/yucca.h @@ -182,6 +182,7 @@ "cp.b ${fileaddr} FFFB0000 ${filesize};" \ "setenv filesize;saveenv\0" \ "upd=run load;run update\0" \ + "pciconfighost=1\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" @@ -297,7 +298,7 @@ #define CONFIG_PCI /* include pci support */ #define CONFIG_PCI_PNP 1 /* do pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ -#undef CONFIG_PCI_CONFIG_HOST_BRIDGE +#define CONFIG_PCI_CONFIG_HOST_BRIDGE /* Board-specific PCI */ #define CFG_PCI_TARGET_INIT /* let board init pci target */ -- cgit v1.3.1 From 1d9e31e04911a6bb7cc66dd91132c699101c32e2 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Sun, 9 Sep 2007 21:21:33 +0200 Subject: Fix compile error in spc1920 config. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Markus Klotzbücher Signed-off-by: Wolfgang Denk --- include/configs/spc1920.h | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) (limited to 'include/configs') diff --git a/include/configs/spc1920.h b/include/configs/spc1920.h index b4ab9ad9726..2efc8f10ec1 100644 --- a/include/configs/spc1920.h +++ b/include/configs/spc1920.h @@ -31,14 +31,9 @@ #undef CONFIG_8xx_CONS_NONE #define CONFIG_MII -/* #define MII_DEBUG */ -/* #define CONFIG_FEC_ENET */ #undef CONFIG_ETHER_ON_FEC1 #define CONFIG_ETHER_ON_FEC2 #define FEC_ENET -/* #define CONFIG_FEC2_PHY_NORXERR */ -/* #define CFG_DISCOVER_PHY */ -/* #define CONFIG_PHY_ADDR 0x1 */ #define CONFIG_FEC2_PHY 1 #define CONFIG_BAUDRATE 19200 @@ -100,14 +95,12 @@ #define CONFIG_CMD_ECHO #define CONFIG_CMD_IMMAP #define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_NET #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_CMD_I2C #define CONFIG_CMD_MII -#undef CONFIG_CMD_NET - - /* * Miscellaneous configurable options */ -- cgit v1.3.1 From 38ad82da0c1180ecdeb212a8f4245e945bcc546e Mon Sep 17 00:00:00 2001 From: Grzegorz Bernacki Date: Tue, 11 Sep 2007 15:42:11 +0200 Subject: [GP3SSA] Add define CONFIG_MPC85XX_PCI2 in config file to allow u-boot to scan on second pci bus. Signed-off-by: Grzegorz Bernacki --- board/stxssa/stxssa.c | 9 ++++++--- include/configs/stxssa.h | 2 +- 2 files changed, 7 insertions(+), 4 deletions(-) (limited to 'include/configs') diff --git a/board/stxssa/stxssa.c b/board/stxssa/stxssa.c index 5882124150e..9a2bfbef8e4 100644 --- a/board/stxssa/stxssa.c +++ b/board/stxssa/stxssa.c @@ -378,9 +378,12 @@ static struct pci_config_table pci_stxgp3_config_table[] = { #endif -static struct pci_controller hose = { +static struct pci_controller hose[] = { #ifndef CONFIG_PCI_PNP - config_table: pci_stxgp3_config_table, + { config_table: pci_stxgp3_config_table,}, +#ifdef CONFIG_MPC85XX_PCI2 + {}, +#endif #endif }; @@ -393,6 +396,6 @@ pci_init_board(void) #ifdef CONFIG_PCI extern void pci_mpc85xx_init(struct pci_controller *hose); - pci_mpc85xx_init(&hose); + pci_mpc85xx_init(hose); #endif /* CONFIG_PCI */ } diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index f32ff67d9f4..b41dafaf986 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -230,7 +230,7 @@ #define CFG_PCI2_IO_SIZE 0x01000000 /* 16M */ #if defined(CONFIG_PCI) /* PCI Ethernet card */ - +#define CONFIG_MPC85XX_PCI2 1 #define CONFIG_NET_MULTI #define CONFIG_PCI_PNP /* do pci plug-and-play */ -- cgit v1.3.1 From 1218abf1b5817a39a82399b4b928b00750575bda Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Sat, 15 Sep 2007 20:48:41 +0200 Subject: Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as global Signed-off-by: Wolfgang Denk --- board/amcc/katmai/katmai.c | 4 ++-- board/amcc/taishan/taishan.c | 4 ++-- board/amcc/yucca/yucca.c | 4 ++-- board/bf533-ezkit/bf533-ezkit.c | 3 ++- board/bf533-stamp/bf533-stamp.c | 3 ++- board/bf537-stamp/bf537-stamp.c | 3 ++- board/bf561-ezkit/bf561-ezkit.c | 3 ++- board/freescale/mpc8313erdb/sdram.c | 3 ++- board/lpc2292sodimm/lpc2292sodimm.c | 7 +------ board/mpc7448hpc2/mpc7448hpc2.c | 4 ++-- board/mpc7448hpc2/tsi108_init.c | 4 ++-- board/mpl/vcma9/cmd_vcma9.c | 4 ++-- board/sbc2410x/sbc2410x.c | 5 +---- board/siemens/SMN42/smn42.c | 7 +------ board/tqm5200/tqm5200.c | 4 ++-- cpu/arm720t/serial.c | 2 -- cpu/bf533/serial.c | 1 - cpu/bf537/i2c.c | 3 ++- cpu/bf537/serial.c | 3 ++- cpu/bf561/serial.c | 3 ++- cpu/mcf532x/cpu.c | 4 ++-- cpu/mcf532x/speed.c | 4 ++-- cpu/mpc86xx/cpu_init.c | 3 ++- cpu/mpc86xx/speed.c | 2 +- cpu/mpc86xx/traps.c | 4 ++-- drivers/qe/qe.c | 7 ++----- drivers/usbdcore_mpc8xx.c | 3 ++- include/configs/atstk1002.h | 3 +-- lib_blackfin/board.c | 7 ++----- lib_blackfin/post.c | 10 ++-------- 30 files changed, 51 insertions(+), 70 deletions(-) (limited to 'include/configs') diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c index afd60ece624..a49066fcc94 100644 --- a/board/amcc/katmai/katmai.c +++ b/board/amcc/katmai/katmai.c @@ -34,6 +34,8 @@ #undef PCIE_ENDPOINT /* #define PCIE_ENDPOINT 1 */ +DECLARE_GLOBAL_DATA_PTR; + int ppc440spe_init_pcie_rootport(int port); void ppc440spe_setup_pcie(struct pci_controller *hose, int port); @@ -322,8 +324,6 @@ int pci_pre_init(struct pci_controller * hose ) #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) void pci_target_init(struct pci_controller * hose ) { - DECLARE_GLOBAL_DATA_PTR; - /*-------------------------------------------------------------------+ * Disable everything *-------------------------------------------------------------------*/ diff --git a/board/amcc/taishan/taishan.c b/board/amcc/taishan/taishan.c index bc976c75261..f00397ed197 100644 --- a/board/amcc/taishan/taishan.c +++ b/board/amcc/taishan/taishan.c @@ -32,6 +32,8 @@ void show_reset_reg(void); #endif +DECLARE_GLOBAL_DATA_PTR; + int lcd_init(void); int board_early_init_f (void) @@ -266,8 +268,6 @@ int pci_pre_init(struct pci_controller * hose ) #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) void pci_target_init(struct pci_controller * hose ) { - DECLARE_GLOBAL_DATA_PTR; - /*--------------------------------------------------------------------------+ * Disable everything *--------------------------------------------------------------------------*/ diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c index 397b01873f4..d7cc384ba0b 100644 --- a/board/amcc/yucca/yucca.c +++ b/board/amcc/yucca/yucca.c @@ -34,6 +34,8 @@ #include "yucca.h" #include "../cpu/ppc4xx/440spe_pcie.h" +DECLARE_GLOBAL_DATA_PTR; + #undef PCIE_ENDPOINT /* #define PCIE_ENDPOINT 1 */ @@ -668,8 +670,6 @@ int pci_pre_init(struct pci_controller * hose ) #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) void pci_target_init(struct pci_controller * hose ) { - DECLARE_GLOBAL_DATA_PTR; - /*-------------------------------------------------------------------+ * Disable everything *-------------------------------------------------------------------*/ diff --git a/board/bf533-ezkit/bf533-ezkit.c b/board/bf533-ezkit/bf533-ezkit.c index 1dd4a3fe2e0..98ed6f81d2b 100644 --- a/board/bf533-ezkit/bf533-ezkit.c +++ b/board/bf533-ezkit/bf533-ezkit.c @@ -30,6 +30,8 @@ #include "psd4256.h" #endif +DECLARE_GLOBAL_DATA_PTR; + int checkboard(void) { #if (BFIN_CPU == ADSP_BF531) @@ -46,7 +48,6 @@ int checkboard(void) long int initdram(int board_type) { - DECLARE_GLOBAL_DATA_PTR; #ifdef DEBUG int brate; char *tmp = getenv("baudrate"); diff --git a/board/bf533-stamp/bf533-stamp.c b/board/bf533-stamp/bf533-stamp.c index b9dff99171a..69e425bf974 100644 --- a/board/bf533-stamp/bf533-stamp.c +++ b/board/bf533-stamp/bf533-stamp.c @@ -30,6 +30,8 @@ #include #include "bf533-stamp.h" +DECLARE_GLOBAL_DATA_PTR; + #define STATUS_LED_OFF 0 #define STATUS_LED_ON 1 @@ -55,7 +57,6 @@ int checkboard(void) long int initdram(int board_type) { - DECLARE_GLOBAL_DATA_PTR; #ifdef DEBUG printf("SDRAM attributes:\n"); printf diff --git a/board/bf537-stamp/bf537-stamp.c b/board/bf537-stamp/bf537-stamp.c index 919cef688db..b3d8bda9bf6 100644 --- a/board/bf537-stamp/bf537-stamp.c +++ b/board/bf537-stamp/bf537-stamp.c @@ -32,6 +32,8 @@ #include #include "ether_bf537.h" +DECLARE_GLOBAL_DATA_PTR; + #define POST_WORD_ADDR 0xFF903FFC /* @@ -132,7 +134,6 @@ void cf_outsw(unsigned short *addr, unsigned short *sect_buf, int words) long int initdram(int board_type) { - DECLARE_GLOBAL_DATA_PTR; #ifdef DEBUG int brate; char *tmp = getenv("baudrate"); diff --git a/board/bf561-ezkit/bf561-ezkit.c b/board/bf561-ezkit/bf561-ezkit.c index 989b0194c1e..2ff44a7152a 100644 --- a/board/bf561-ezkit/bf561-ezkit.c +++ b/board/bf561-ezkit/bf561-ezkit.c @@ -29,6 +29,8 @@ #include #include +DECLARE_GLOBAL_DATA_PTR; + int checkboard(void) { printf("CPU: ADSP BF561\n"); @@ -39,7 +41,6 @@ int checkboard(void) long int initdram(int board_type) { - DECLARE_GLOBAL_DATA_PTR; #ifdef DEBUG int brate; char *tmp = getenv("baudrate"); diff --git a/board/freescale/mpc8313erdb/sdram.c b/board/freescale/mpc8313erdb/sdram.c index e6e84107eb2..16ec4bbf546 100644 --- a/board/freescale/mpc8313erdb/sdram.c +++ b/board/freescale/mpc8313erdb/sdram.c @@ -33,10 +33,11 @@ #include +DECLARE_GLOBAL_DATA_PTR; + #ifndef CFG_8313ERDB_BROKEN_PMC static void resume_from_sleep(void) { - DECLARE_GLOBAL_DATA_PTR; u32 magic = *(u32 *)0; typedef void (*func_t)(void); diff --git a/board/lpc2292sodimm/lpc2292sodimm.c b/board/lpc2292sodimm/lpc2292sodimm.c index d212c63328b..9c2d1af2fcb 100644 --- a/board/lpc2292sodimm/lpc2292sodimm.c +++ b/board/lpc2292sodimm/lpc2292sodimm.c @@ -28,8 +28,7 @@ #include #include -/* ------------------------------------------------------------------------- */ - +DECLARE_GLOBAL_DATA_PTR; /* * Miscelaneous platform dependent initialisations @@ -37,8 +36,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* Activate LED flasher */ IO_LEDFLSH = 0x40; @@ -53,8 +50,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/mpc7448hpc2/mpc7448hpc2.c b/board/mpc7448hpc2/mpc7448hpc2.c index 63c99de1756..81846eba77d 100644 --- a/board/mpc7448hpc2/mpc7448hpc2.c +++ b/board/mpc7448hpc2/mpc7448hpc2.c @@ -38,6 +38,8 @@ extern void ft_cpu_setup (void *blob, bd_t *bd); #undef DEBUG +DECLARE_GLOBAL_DATA_PTR; + extern void flush_data_cache (void); extern void invalidate_l1_instruction_cache (void); extern void tsi108_init_f (void); @@ -46,8 +48,6 @@ int display_mem_map (void); void after_reloc (ulong dest_addr) { - DECLARE_GLOBAL_DATA_PTR; - /* * Jump to the main U-Boot board init code */ diff --git a/board/mpc7448hpc2/tsi108_init.c b/board/mpc7448hpc2/tsi108_init.c index 8a7efef7723..30ae17d8729 100644 --- a/board/mpc7448hpc2/tsi108_init.c +++ b/board/mpc7448hpc2/tsi108_init.c @@ -33,6 +33,8 @@ #include #include +DECLARE_GLOBAL_DATA_PTR; + extern void mpicInit (int verbose); /* @@ -141,7 +143,6 @@ unsigned long get_board_bus_clk (void) int board_early_init_f (void) { - DECLARE_GLOBAL_DATA_PTR; ulong i; gd->mem_clk = 0; @@ -583,7 +584,6 @@ unsigned long get_l2cr (void) int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; #ifdef CFG_CLK_SPREAD /* Initialize Spread-Spectrum Clock generation */ ulong i; diff --git a/board/mpl/vcma9/cmd_vcma9.c b/board/mpl/vcma9/cmd_vcma9.c index 44b41125546..227c49272ce 100644 --- a/board/mpl/vcma9/cmd_vcma9.c +++ b/board/mpl/vcma9/cmd_vcma9.c @@ -40,6 +40,8 @@ static uchar cs8900_chksum(ushort data) #endif +DECLARE_GLOBAL_DATA_PTR; + extern void print_vcma9_info(void); extern int vcma9_cantest(int); extern int vcma9_nandtest(void); @@ -53,8 +55,6 @@ extern int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); int do_vcma9(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { - DECLARE_GLOBAL_DATA_PTR; - if (strcmp(argv[1], "info") == 0) { print_vcma9_info(); diff --git a/board/sbc2410x/sbc2410x.c b/board/sbc2410x/sbc2410x.c index b4865e1229c..6c894a3869e 100644 --- a/board/sbc2410x/sbc2410x.c +++ b/board/sbc2410x/sbc2410x.c @@ -35,7 +35,7 @@ #include #endif -/* ------------------------------------------------------------------------- */ +DECLARE_GLOBAL_DATA_PTR; #define FCLK_SPEED 1 @@ -74,7 +74,6 @@ static inline void delay (unsigned long loops) int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); @@ -128,8 +127,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/siemens/SMN42/smn42.c b/board/siemens/SMN42/smn42.c index cbfc76c4639..52d1d7e5f38 100644 --- a/board/siemens/SMN42/smn42.c +++ b/board/siemens/SMN42/smn42.c @@ -31,8 +31,7 @@ #include #include -/* ------------------------------------------------------------------------- */ - +DECLARE_GLOBAL_DATA_PTR; /* * Miscellaneous platform dependent initialisations @@ -40,8 +39,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* arch number MACH_TYPE_ARMADILLO - not official*/ gd->bd->bi_arch_number = 83; @@ -53,8 +50,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c index 21f67aa4e53..29d6f00427f 100644 --- a/board/tqm5200/tqm5200.c +++ b/board/tqm5200/tqm5200.c @@ -43,6 +43,8 @@ #include "mt48lc16m16a2-75.h" #endif +DECLARE_GLOBAL_DATA_PTR; + #ifdef CONFIG_PS2MULT void ps2mult_early_init(void); #endif @@ -477,8 +479,6 @@ int silent_boot (void) int board_early_init_f (void) { - DECLARE_GLOBAL_DATA_PTR; - if (silent_boot()) gd->flags |= GD_FLG_SILENT; diff --git a/cpu/arm720t/serial.c b/cpu/arm720t/serial.c index 15c54af08b7..27eb73ad889 100644 --- a/cpu/arm720t/serial.c +++ b/cpu/arm720t/serial.c @@ -129,8 +129,6 @@ serial_puts (const char *s) void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - unsigned short divisor = 0; switch (gd->baudrate) { diff --git a/cpu/bf533/serial.c b/cpu/bf533/serial.c index 6cab5daac79..8ac6e3ff64e 100644 --- a/cpu/bf533/serial.c +++ b/cpu/bf533/serial.c @@ -76,7 +76,6 @@ void calc_baud(void) void serial_setbrg(void) { int i; - DECLARE_GLOBAL_DATA_PTR; calc_baud(); diff --git a/cpu/bf537/i2c.c b/cpu/bf537/i2c.c index 3b0d026e0dc..0daba63b68a 100644 --- a/cpu/bf537/i2c.c +++ b/cpu/bf537/i2c.c @@ -22,6 +22,8 @@ #include #include +DECLARE_GLOBAL_DATA_PTR; + #define bfin_read16(addr) ({ unsigned __v; \ __asm__ __volatile__ (\ "%0 = w[%1] (z);\n\t"\ @@ -68,7 +70,6 @@ #ifdef DEBUG_I2C #define PRINTD(fmt,args...) do { \ - DECLARE_GLOBAL_DATA_PTR; \ if (gd->have_console) \ printf(fmt ,##args); \ } while (0) diff --git a/cpu/bf537/serial.c b/cpu/bf537/serial.c index e04d08a0e77..f7a2483ffbe 100644 --- a/cpu/bf537/serial.c +++ b/cpu/bf537/serial.c @@ -52,6 +52,8 @@ #include #include "serial.h" +DECLARE_GLOBAL_DATA_PTR; + unsigned long pll_div_fact; void calc_baud(void) @@ -74,7 +76,6 @@ void calc_baud(void) void serial_setbrg(void) { int i; - DECLARE_GLOBAL_DATA_PTR; calc_baud(); diff --git a/cpu/bf561/serial.c b/cpu/bf561/serial.c index 7f5c6953618..bc5a4f57260 100644 --- a/cpu/bf561/serial.c +++ b/cpu/bf561/serial.c @@ -52,6 +52,8 @@ #include "serial.h" #include +DECLARE_GLOBAL_DATA_PTR; + unsigned long pll_div_fact; void calc_baud(void) @@ -74,7 +76,6 @@ void calc_baud(void) void serial_setbrg(void) { int i; - DECLARE_GLOBAL_DATA_PTR; calc_baud(); diff --git a/cpu/mcf532x/cpu.c b/cpu/mcf532x/cpu.c index 520f5d69397..2f62e956cca 100644 --- a/cpu/mcf532x/cpu.c +++ b/cpu/mcf532x/cpu.c @@ -31,6 +31,8 @@ #include +DECLARE_GLOBAL_DATA_PTR; + int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[]) { volatile wdog_t *wdp = (wdog_t *) (MMAP_WDOG); @@ -48,8 +50,6 @@ int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[]) int checkcpu(void) { - DECLARE_GLOBAL_DATA_PTR; - volatile ccm_t *ccm = (ccm_t *) MMAP_CCM; u16 msk; u16 id = 0; diff --git a/cpu/mcf532x/speed.c b/cpu/mcf532x/speed.c index cf72609b42f..001b9f42d64 100644 --- a/cpu/mcf532x/speed.c +++ b/cpu/mcf532x/speed.c @@ -30,6 +30,8 @@ #include +DECLARE_GLOBAL_DATA_PTR; + /* PLL min/max specifications */ #define MAX_FVCO 500000 /* KHz */ #define MAX_FSYS 80000 /* KHz */ @@ -208,8 +210,6 @@ int clock_pll(int fsys, int flags) */ int get_clocks(void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bus_clk = clock_pll(CFG_CLK / 1000, 0) * 1000; gd->cpu_clk = (gd->bus_clk * 3); return (0); diff --git a/cpu/mpc86xx/cpu_init.c b/cpu/mpc86xx/cpu_init.c index c8e46666949..4f8956e0afe 100644 --- a/cpu/mpc86xx/cpu_init.c +++ b/cpu/mpc86xx/cpu_init.c @@ -29,6 +29,8 @@ #include #include +DECLARE_GLOBAL_DATA_PTR; + /* * Breathe some life into the CPU... * @@ -38,7 +40,6 @@ void cpu_init_f(void) { - DECLARE_GLOBAL_DATA_PTR; volatile immap_t *immap = (immap_t *)CFG_IMMR; volatile ccsr_lbc_t *memctl = &immap->im_lbc; diff --git a/cpu/mpc86xx/speed.c b/cpu/mpc86xx/speed.c index 312ca128277..23161ca8cbe 100644 --- a/cpu/mpc86xx/speed.c +++ b/cpu/mpc86xx/speed.c @@ -29,6 +29,7 @@ #include #include +DECLARE_GLOBAL_DATA_PTR; void get_sys_info(sys_info_t *sysInfo) { @@ -96,7 +97,6 @@ void get_sys_info(sys_info_t *sysInfo) int get_clocks(void) { - DECLARE_GLOBAL_DATA_PTR; sys_info_t sys_info; get_sys_info(&sys_info); diff --git a/cpu/mpc86xx/traps.c b/cpu/mpc86xx/traps.c index c84bfbf6aaa..04c2e1331b6 100644 --- a/cpu/mpc86xx/traps.c +++ b/cpu/mpc86xx/traps.c @@ -34,6 +34,8 @@ #include #include +DECLARE_GLOBAL_DATA_PTR; + #if defined(CONFIG_CMD_KGDB) int (*debugger_exception_handler)(struct pt_regs *) = 0; #endif @@ -50,8 +52,6 @@ extern unsigned long search_exception_table(unsigned long); void print_backtrace(unsigned long *sp) { - DECLARE_GLOBAL_DATA_PTR; - int cnt = 0; unsigned long i; diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c index 0f5232a72af..7559e922272 100644 --- a/drivers/qe/qe.c +++ b/drivers/qe/qe.c @@ -30,6 +30,8 @@ qe_map_t *qe_immr = NULL; static qe_snum_t snums[QE_NUM_OF_SNUM]; +DECLARE_GLOBAL_DATA_PTR; + void qe_issue_cmd(uint cmd, uint sbc, u8 mcn, u32 cmd_data) { u32 cecr; @@ -51,8 +53,6 @@ void qe_issue_cmd(uint cmd, uint sbc, u8 mcn, u32 cmd_data) uint qe_muram_alloc(uint size, uint align) { - DECLARE_GLOBAL_DATA_PTR; - uint retloc; uint align_mask, off; uint savebase; @@ -158,8 +158,6 @@ void qe_put_snum(u8 snum) void qe_init(uint qe_base) { - DECLARE_GLOBAL_DATA_PTR; - /* Init the QE IMMR base */ qe_immr = (qe_map_t *)qe_base; @@ -204,7 +202,6 @@ void qe_assign_page(uint snum, uint para_ram_base) int qe_set_brg(uint brg, uint rate) { - DECLARE_GLOBAL_DATA_PTR; volatile uint *bp; u32 divisor; int div16 = 0; diff --git a/drivers/usbdcore_mpc8xx.c b/drivers/usbdcore_mpc8xx.c index e87284b1787..d4c40965656 100644 --- a/drivers/usbdcore_mpc8xx.c +++ b/drivers/usbdcore_mpc8xx.c @@ -64,6 +64,8 @@ #include "usbdcore_mpc8xx.h" #include "usbdcore_ep0.h" +DECLARE_GLOBAL_DATA_PTR; + #define ERR(fmt, args...)\ serial_printf("ERROR : [%s] %s:%d: "fmt,\ __FILE__,__FUNCTION__,__LINE__, ##args) @@ -1216,7 +1218,6 @@ static void mpc8xx_udc_clock_init (volatile immap_t * immr, #elif defined(CFG_USB_BRGCLK) /* This has been tested with brgclk == 50MHz */ - DECLARE_GLOBAL_DATA_PTR; int divisor = 0; if (gd->cpu_clk < 48000000L) { diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h index e1d8f74c5ec..75b153e4a85 100644 --- a/include/configs/atstk1002.h +++ b/include/configs/atstk1002.h @@ -183,10 +183,9 @@ #define CFG_LONGHELP 1 #define CFG_MEMTEST_START \ - ({ DECLARE_GLOBAL_DATA_PTR; gd->bd->bi_dram[0].start; }) + ({ gd->bd->bi_dram[0].start; }) #define CFG_MEMTEST_END \ ({ \ - DECLARE_GLOBAL_DATA_PTR; \ gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size; \ }) #define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 } diff --git a/lib_blackfin/board.c b/lib_blackfin/board.c index 36a969e7318..7c9990f8e0d 100644 --- a/lib_blackfin/board.c +++ b/lib_blackfin/board.c @@ -42,6 +42,8 @@ int post_flag; #endif +DECLARE_GLOBAL_DATA_PTR; + #ifndef CFG_NO_FLASH extern flash_info_t flash_info[]; #endif @@ -126,8 +128,6 @@ static void display_flash_config(ulong size) static int init_baudrate(void) { - DECLARE_GLOBAL_DATA_PTR; - char tmp[64]; int i = getenv_r("baudrate", tmp, sizeof(tmp)); gd->bd->bi_baudrate = gd->baudrate = (i > 0) @@ -139,7 +139,6 @@ static int init_baudrate(void) #ifdef DEBUG static void display_global_data(void) { - DECLARE_GLOBAL_DATA_PTR; bd_t *bd; bd = gd->bd; printf("--flags:%x\n", gd->flags); @@ -256,7 +255,6 @@ void init_cplbtables(void) void board_init_f(ulong bootflag) { - DECLARE_GLOBAL_DATA_PTR; ulong addr; bd_t *bd; int i; @@ -325,7 +323,6 @@ static int init_func_i2c(void) void board_init_r(gd_t * id, ulong dest_addr) { - DECLARE_GLOBAL_DATA_PTR; ulong size; extern void malloc_bin_reloc(void); char *s, *e; diff --git a/lib_blackfin/post.c b/lib_blackfin/post.c index 7c9478def5c..3c4d5c51dda 100644 --- a/lib_blackfin/post.c +++ b/lib_blackfin/post.c @@ -32,14 +32,14 @@ #ifdef CONFIG_POST +DECLARE_GLOBAL_DATA_PTR; + #define POST_MAX_NUMBER 32 #define BOOTMODE_MAGIC 0xDEAD0000 int post_init_f(void) { - DECLARE_GLOBAL_DATA_PTR; - int res = 0; unsigned int i; @@ -62,7 +62,6 @@ int post_init_f(void) void post_bootmode_init(void) { - DECLARE_GLOBAL_DATA_PTR; int bootmode = post_bootmode_get(0); int newword; @@ -109,20 +108,17 @@ int post_bootmode_get(unsigned int *last_test) /* POST tests run before relocation only mark status bits .... */ static void post_log_mark_start(unsigned long testid) { - DECLARE_GLOBAL_DATA_PTR; gd->post_log_word |= (testid) << 16; } static void post_log_mark_succ(unsigned long testid) { - DECLARE_GLOBAL_DATA_PTR; gd->post_log_word |= testid; } /* ... and the messages are output once we are relocated */ void post_output_backlog(void) { - DECLARE_GLOBAL_DATA_PTR; int j; for (j = 0; j < post_list_size; j++) { @@ -372,8 +368,6 @@ int post_log(char *format, ...) void post_reloc(void) { - DECLARE_GLOBAL_DATA_PTR; - unsigned int i; /* -- cgit v1.3.1 From c750d2e6692a000a82f29de7bf24e3dc21239161 Mon Sep 17 00:00:00 2001 From: Matthias Fuchs Date: Wed, 12 Sep 2007 12:36:53 +0200 Subject: NAND: Add CFG_NAND_QUIET option This config option sets the default for the progress information output behavior that can also be configured through the 'quiet' environment variable. The legacy NAND code does not print the current progress info on the console. So this option is for backward compatibility for units that are in the field and where setting the quiet variable is not an option. With CFG_NAND_QUIET set to '1' the console progress info is turned off. This can still be overwritten through the environment variable. Signed-off-by: Matthias Fuchs --- common/cmd_nand.c | 4 ++++ include/configs/ASH405.h | 3 ++- include/configs/CMS700.h | 3 ++- include/configs/HH405.h | 3 ++- include/configs/HUB405.h | 3 ++- include/configs/PLU405.h | 3 ++- include/configs/VOH405.h | 3 ++- 7 files changed, 16 insertions(+), 6 deletions(-) (limited to 'include/configs') diff --git a/common/cmd_nand.c b/common/cmd_nand.c index 254a7755fcf..aeb76e5fb71 100644 --- a/common/cmd_nand.c +++ b/common/cmd_nand.c @@ -161,7 +161,11 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) ulong addr, off, size; char *cmd, *s; nand_info_t *nand; +#ifdef CFG_NAND_QUIET + int quiet = CFG_NAND_QUIET; +#else int quiet = 0; +#endif const char *quiet_str = getenv("quiet"); /* at least two arguments please */ diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h index 0718c857455..9adbba95441 100644 --- a/include/configs/ASH405.h +++ b/include/configs/ASH405.h @@ -158,7 +158,8 @@ #define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ #define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ +#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ +#define CFG_NAND_QUIET 1 /*----------------------------------------------------------------------- * PCI stuff diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h index 1fd2b53974b..21cd9c1f261 100644 --- a/include/configs/CMS700.h +++ b/include/configs/CMS700.h @@ -165,7 +165,8 @@ #define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ #define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ +#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ +#define CFG_NAND_QUIET 1 /*----------------------------------------------------------------------- * PCI stuff diff --git a/include/configs/HH405.h b/include/configs/HH405.h index ea8e61a764b..8967b3fc601 100644 --- a/include/configs/HH405.h +++ b/include/configs/HH405.h @@ -217,7 +217,8 @@ #define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ #define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ +#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ +#define CFG_NAND_QUIET 1 /*----------------------------------------------------------------------- * PCI stuff diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h index ed669c51da6..1ff71081302 100644 --- a/include/configs/HUB405.h +++ b/include/configs/HUB405.h @@ -157,7 +157,8 @@ #define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ #define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ +#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ +#define CFG_NAND_QUIET 1 /*----------------------------------------------------------------------- * PCI stuff diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h index 4acbcd5e1ca..652210c19da 100644 --- a/include/configs/PLU405.h +++ b/include/configs/PLU405.h @@ -177,7 +177,8 @@ #define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ #define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ +#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ +#define CFG_NAND_QUIET 1 /*----------------------------------------------------------------------- * PCI stuff diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h index 3880ec74765..14848abe5b2 100644 --- a/include/configs/VOH405.h +++ b/include/configs/VOH405.h @@ -163,7 +163,8 @@ #define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ #define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ +#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ +#define CFG_NAND_QUIET 1 /*----------------------------------------------------------------------- * PCI stuff -- cgit v1.3.1 From eb6da8050797c204c9d010548424186c7ce32fc1 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Sun, 16 Sep 2007 02:39:35 +0200 Subject: TQM8xx/FPS8xx: adjust flash partitions for 2.6 ARCH=powerpc kernels Signed-off-by: Wolfgang Denk --- include/configs/FPS850L.h | 60 +++++++++++++++++++++++++++++++++-------------- include/configs/FPS860L.h | 46 ++++++++++++++++++++++++++++-------- include/configs/TQM823L.h | 5 ++-- include/configs/TQM823M.h | 5 ++-- include/configs/TQM850L.h | 5 ++-- include/configs/TQM850M.h | 5 ++-- include/configs/TQM855L.h | 5 ++-- include/configs/TQM855M.h | 5 ++-- include/configs/TQM860L.h | 5 ++-- include/configs/TQM860M.h | 5 ++-- include/configs/TQM862L.h | 5 ++-- include/configs/TQM862M.h | 5 ++-- include/configs/TQM866M.h | 5 ++-- 13 files changed, 111 insertions(+), 50 deletions(-) (limited to 'include/configs') diff --git a/include/configs/FPS850L.h b/include/configs/FPS850L.h index 322158c7b81..3b0ddb4ec60 100644 --- a/include/configs/FPS850L.h +++ b/include/configs/FPS850L.h @@ -39,28 +39,44 @@ #undef CONFIG_8xx_CONS_SMC1 #define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */ #undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 19200 -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif -#define CONFIG_BOOTCOMMAND "bootm 40020000" /* autoboot command */ +#define CONFIG_BAUDRATE 115200 -#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ +#define CONFIG_BOOTCOUNT_LIMIT + +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_BOARD_TYPES 1 /* support board types */ -#define CONFIG_BOOTARGS "root=/dev/nfs rw " \ - "nfsroot=10.0.0.2:/opt/eldk/ppc_8xx " \ - "nfsaddrs=10.0.0.99:10.0.0.2" +#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "flash_nfs=run nfsargs addip;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ + "rootpath=/opt/eldk/ppc_8xx\0" \ + "bootfile=/tftpboot/fps850L/uImage\0" \ + "fdt_addr=40040000\0" \ + "kernel_addr=40060000\0" \ + "ramdisk_addr=40200000\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_self" #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ #undef CONFIG_WATCHDOG /* watchdog disabled */ - /* * BOOTP options */ @@ -80,24 +96,32 @@ #define CONFIG_BOOTP_NTPSERVER #define CONFIG_BOOTP_TIMEOFFSET +#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ /* * Command line configuration. */ #include -#undef CONFIG_CMD_CONSOLE -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_LOADB -#undef CONFIG_CMD_CACHE +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */ +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + #if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else diff --git a/include/configs/FPS860L.h b/include/configs/FPS860L.h index f8698b57085..6fec07540cf 100644 --- a/include/configs/FPS860L.h +++ b/include/configs/FPS860L.h @@ -40,18 +40,37 @@ #define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */ #undef CONFIG_8xx_CONS_NONE #define CONFIG_BAUDRATE 115200 -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else + +#define CONFIG_BOOTCOUNT_LIMIT + #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif -#define CONFIG_BOOTCOMMAND "bootm 40040000" /* autoboot command */ #define CONFIG_BOARD_TYPES 1 /* support board types */ -#define CONFIG_BOOTARGS "root=/dev/nfs rw " \ - "nfsroot=10.0.0.2:/opt/eldk/ppc_8xx " \ - "nfsaddrs=10.0.0.99:10.0.0.2" +#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "flash_nfs=run nfsargs addip;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ + "rootpath=/opt/eldk/ppc_8xx\0" \ + "bootfile=/tftpboot/fps850L/uImage\0" \ + "fdt_addr=40040000\0" \ + "kernel_addr=40060000\0" \ + "ramdisk_addr=40200000\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_self" #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ @@ -79,11 +98,11 @@ #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ - /* * Command line configuration. */ #include + #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP @@ -95,7 +114,14 @@ * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */ +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + #if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h index 2bdcf2cf951..384789b1328 100644 --- a/include/configs/TQM823L.h +++ b/include/configs/TQM823L.h @@ -70,8 +70,9 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/TQM823L/uImage\0" \ - "kernel_addr=40040000\0" \ - "ramdisk_addr=40100000\0" \ + "fdt_addr=40040000\0" \ + "kernel_addr=40060000\0" \ + "ramdisk_addr=40200000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h index 58bc5d3f956..47f416b49d4 100644 --- a/include/configs/TQM823M.h +++ b/include/configs/TQM823M.h @@ -70,8 +70,9 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/TQM823M/uImage\0" \ - "kernel_addr=40080000\0" \ - "ramdisk_addr=40180000\0" \ + "fdt_addr=40080000\0" \ + "kernel_addr=400A0000\0" \ + "ramdisk_addr=40280000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h index 74b16c7cf9c..e4b0bd27960 100644 --- a/include/configs/TQM850L.h +++ b/include/configs/TQM850L.h @@ -66,8 +66,9 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/TQM850L/uImage\0" \ - "kernel_addr=40040000\0" \ - "ramdisk_addr=40100000\0" \ + "fdt_addr=40040000\0" \ + "kernel_addr=40060000\0" \ + "ramdisk_addr=40200000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h index e3936c33043..f26c46e99a7 100644 --- a/include/configs/TQM850M.h +++ b/include/configs/TQM850M.h @@ -64,8 +64,9 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/TQM850M/uImage\0" \ - "kernel_addr=40080000\0" \ - "ramdisk_addr=40180000\0" \ + "fdt_addr=40080000\0" \ + "kernel_addr=400A0000\0" \ + "ramdisk_addr=40280000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h index ae22b77d7f9..330c931cc13 100644 --- a/include/configs/TQM855L.h +++ b/include/configs/TQM855L.h @@ -69,8 +69,9 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/TQM855L/uImage\0" \ - "kernel_addr=40040000\0" \ - "ramdisk_addr=40100000\0" \ + "fdt_addr=40040000\0" \ + "kernel_addr=40060000\0" \ + "ramdisk_addr=40200000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h index 5d54f876c8a..77c2f114a2d 100644 --- a/include/configs/TQM855M.h +++ b/include/configs/TQM855M.h @@ -69,8 +69,9 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/TQM855M/uImage\0" \ - "kernel_addr=40080000\0" \ - "ramdisk_addr=40180000\0" \ + "fdt_addr=40080000\0" \ + "kernel_addr=400A0000\0" \ + "ramdisk_addr=40280000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h index 40c0940d5a2..a903c2b3421 100644 --- a/include/configs/TQM860L.h +++ b/include/configs/TQM860L.h @@ -69,8 +69,9 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/TQM860L/uImage\0" \ - "kernel_addr=40040000\0" \ - "ramdisk_addr=40100000\0" \ + "fdt_addr=40040000\0" \ + "kernel_addr=40060000\0" \ + "ramdisk_addr=40200000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h index 481e3d0d532..b905a0a635a 100644 --- a/include/configs/TQM860M.h +++ b/include/configs/TQM860M.h @@ -69,8 +69,9 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/TQM860M/uImage\0" \ - "kernel_addr=40080000\0" \ - "ramdisk_addr=40180000\0" \ + "fdt_addr=40080000\0" \ + "kernel_addr=400A0000\0" \ + "ramdisk_addr=40280000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h index bb3b1cc5411..d8ddf37fa94 100644 --- a/include/configs/TQM862L.h +++ b/include/configs/TQM862L.h @@ -72,8 +72,9 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/TQM862L/uImage\0" \ - "kernel_addr=40040000\0" \ - "ramdisk_addr=40100000\0" \ + "fdt_addr=40040000\0" \ + "kernel_addr=40060000\0" \ + "ramdisk_addr=40200000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h index d687d082c94..50607f0e523 100644 --- a/include/configs/TQM862M.h +++ b/include/configs/TQM862M.h @@ -72,8 +72,9 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/TQM862M/uImage\0" \ - "kernel_addr=40080000\0" \ - "ramdisk_addr=40180000\0" \ + "fdt_addr=40080000\0" \ + "kernel_addr=400A0000\0" \ + "ramdisk_addr=40280000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h index ff00c133080..ea310c42350 100644 --- a/include/configs/TQM866M.h +++ b/include/configs/TQM866M.h @@ -81,8 +81,9 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/TQM866M/uImage\0" \ - "kernel_addr=40080000\0" \ - "ramdisk_addr=40180000\0" \ + "fdt_addr=40080000\0" \ + "kernel_addr=400A0000\0" \ + "ramdisk_addr=40280000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" -- cgit v1.3.1 From 67c31036acaaaa992fc346cc89db0909a7e733c4 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Sun, 16 Sep 2007 17:10:04 +0200 Subject: TQM8xx[LM]: Fix broken environment alignment. With recent toolchains, the environment sectors were no longer aligned to sector boundaries. The reason was a combination of two bugs: 1) common/environment.c assumed that CONFIG_TQM8xxL would be defined for all TQM8xxL and TQM8xxM boards. But "include/common.h", where this gets defined, is not included here (and cannot be included without causing lots of problems). Added a new #define CFG_USE_PPCENV for all boards which really want to put the environment is a ".ppcenv" section. 2) The linker scripts just include environment.o, silently assuming that the objects in that file are really in the order in which they are coded in the C file, i. e. "environment" first, then "redundand_environment", and "env_size" last. However, current toolchains (GCC-4.x) reorder the objects, causing the environment data not to start on a flash sector boundary: Instead of: we got: 40008000 T environment 40008000 T env_size 4000c000 T redundand_environment 40008004 T redundand_environment 40010000 T env_size 4000c004 T environment Note: this patch fixes just the first part, and cures the alignment problem by making sure that "env_size" gets placed correctly. However, we still have a potential issue because primary and redundant environment sectors are actually swapped, i. e. we have now: 40008000 T redundand_environment 4000c000 T environment 40010000 T env_size This shall be fixed in the next version. Signed-off-by: Wolfgang Denk --- board/fads/fads.h | 1 + common/environment.c | 13 +------------ include/configs/CATcenter.h | 2 ++ include/configs/FADS823.h | 1 + include/configs/FADS850SAR.h | 1 + include/configs/ICU862.h | 1 + include/configs/M5271EVB.h | 5 ++--- include/configs/PPChameleonEVB.h | 2 ++ include/configs/R360MPI.h | 1 + include/configs/RRvision.h | 2 ++ include/configs/TQM823L.h | 2 ++ include/configs/TQM823M.h | 2 ++ include/configs/TQM850L.h | 2 ++ include/configs/TQM850M.h | 2 ++ include/configs/TQM855L.h | 2 ++ include/configs/TQM855M.h | 2 ++ include/configs/TQM860L.h | 2 ++ include/configs/TQM860M.h | 2 ++ include/configs/TQM862L.h | 2 ++ include/configs/TQM862M.h | 2 ++ include/configs/TQM866M.h | 2 ++ include/configs/cmi_mpc5xx.h | 5 +++-- include/configs/hymod.h | 1 + include/configs/idmr.h | 2 ++ include/configs/trab.h | 2 ++ include/configs/virtlab2.h | 2 ++ 26 files changed, 46 insertions(+), 17 deletions(-) (limited to 'include/configs') diff --git a/board/fads/fads.h b/board/fads/fads.h index a7fe2e9019c..dea8a0dc100 100644 --- a/board/fads/fads.h +++ b/board/fads/fads.h @@ -229,6 +229,7 @@ #define CFG_ENV_SECT_SIZE 0x40000 /* see README - env sector total size */ #define CFG_ENV_OFFSET CFG_ENV_SECT_SIZE #define CFG_ENV_SIZE 0x4000 /* Total Size of Environment */ +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ #define CFG_DIRECT_FLASH_TFTP diff --git a/common/environment.c b/common/environment.c index 1d425a73097..24257f7c527 100644 --- a/common/environment.c +++ b/common/environment.c @@ -51,18 +51,7 @@ * a seperate section. Note that ENV_CRC is only defined when building * U-Boot itself. */ -#if (defined(CONFIG_CMI) || \ - defined(CONFIG_FADS) || \ - defined(CONFIG_HYMOD) || \ - defined(CONFIG_ICU862) || \ - defined(CONFIG_R360MPI) || \ - defined(CONFIG_TQM8xxL) || \ - defined(CONFIG_RRVISION) || \ - defined(CONFIG_TRAB) || \ - defined(CONFIG_PPCHAMELEONEVB) || \ - defined(CONFIG_M5271EVB) || \ - defined(CONFIG_IDMR) || \ - defined(CONFIG_NAND_U_BOOT)) && \ +#if (defined(CFG_USE_PPCENV) || defined(CONFIG_NAND_U_BOOT)) && \ defined(ENV_CRC) /* Environment embedded in U-Boot .ppcenv section */ /* XXX - This only works with GNU C */ # define __PPCENV__ __attribute__ ((section(".ppcenv"))) diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h index 62a2eaa2365..0321650f3d2 100644 --- a/include/configs/CATcenter.h +++ b/include/configs/CATcenter.h @@ -399,6 +399,8 @@ #define CFG_ENV_ADDR_REDUND 0xFFFFA000 #define CFG_ENV_SIZE_REDUND 0x2000 +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ + #define CFG_NVRAM_BASE_ADDR 0xF0000500 /* NVRAM base address */ #define CFG_NVRAM_SIZE 242 /* NVRAM size */ diff --git a/include/configs/FADS823.h b/include/configs/FADS823.h index a562b2fa4e8..f810af2ceca 100644 --- a/include/configs/FADS823.h +++ b/include/configs/FADS823.h @@ -206,6 +206,7 @@ #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_OFFSET 0x00040000 /* Offset of Environment Sector */ #define CFG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */ +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ /*----------------------------------------------------------------------- * Cache Configuration diff --git a/include/configs/FADS850SAR.h b/include/configs/FADS850SAR.h index c8ce25957b0..a09c0e0393f 100644 --- a/include/configs/FADS850SAR.h +++ b/include/configs/FADS850SAR.h @@ -156,6 +156,7 @@ #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_OFFSET 0x00040000 /* Offset of Environment Sector */ #define CFG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */ +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ /*----------------------------------------------------------------------- * Cache Configuration diff --git a/include/configs/ICU862.h b/include/configs/ICU862.h index 27a5bc302fc..da54cef534f 100644 --- a/include/configs/ICU862.h +++ b/include/configs/ICU862.h @@ -234,6 +234,7 @@ #define CFG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment sector */ #define CFG_ENV_SIZE 0x4000 /* Used Size of Environment Sector */ +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ /*----------------------------------------------------------------------- * Cache Configuration diff --git a/include/configs/M5271EVB.h b/include/configs/M5271EVB.h index 0f97050f213..798ec0c7a4c 100644 --- a/include/configs/M5271EVB.h +++ b/include/configs/M5271EVB.h @@ -54,13 +54,12 @@ */ #ifndef CONFIG_MONITOR_IS_IN_RAM #define CFG_ENV_OFFSET 0x4000 -#define CFG_ENV_SECT_SIZE 0x2000 -#define CFG_ENV_IS_IN_FLASH 1 #else #define CFG_ENV_ADDR 0xffe04000 +#endif #define CFG_ENV_SECT_SIZE 0x2000 #define CFG_ENV_IS_IN_FLASH 1 -#endif +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ /* * BOOTP options diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h index dd1decdcd94..8a74c4f5c90 100644 --- a/include/configs/PPChameleonEVB.h +++ b/include/configs/PPChameleonEVB.h @@ -429,6 +429,8 @@ #define CFG_ENV_ADDR_REDUND 0xFFFFA000 #define CFG_ENV_SIZE_REDUND 0x2000 +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ + #endif /* ENVIRONMENT_IN_EEPROM */ diff --git a/include/configs/R360MPI.h b/include/configs/R360MPI.h index 516ec643d65..a98b4af29e3 100644 --- a/include/configs/R360MPI.h +++ b/include/configs/R360MPI.h @@ -233,6 +233,7 @@ #define CFG_ENV_OFFSET 0x40000 /* Offset of Environment */ #define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment sector */ #define CFG_ENV_SIZE 0x4000 /* Used Size of Environment sector */ +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ /*----------------------------------------------------------------------- * Cache Configuration diff --git a/include/configs/RRvision.h b/include/configs/RRvision.h index 1e6e8c0aa23..32e22854545 100644 --- a/include/configs/RRvision.h +++ b/include/configs/RRvision.h @@ -235,6 +235,8 @@ #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ + /*----------------------------------------------------------------------- * Cache Configuration */ diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h index 384789b1328..7a3801026fb 100644 --- a/include/configs/TQM823L.h +++ b/include/configs/TQM823L.h @@ -206,6 +206,8 @@ #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ + /*----------------------------------------------------------------------- * Hardware Information Block */ diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h index 47f416b49d4..e8b6a80b19e 100644 --- a/include/configs/TQM823M.h +++ b/include/configs/TQM823M.h @@ -203,6 +203,8 @@ #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ + /*----------------------------------------------------------------------- * Hardware Information Block */ diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h index e4b0bd27960..beeca6343e8 100644 --- a/include/configs/TQM850L.h +++ b/include/configs/TQM850L.h @@ -193,6 +193,8 @@ #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ + /*----------------------------------------------------------------------- * Hardware Information Block */ diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h index f26c46e99a7..d5609c1d485 100644 --- a/include/configs/TQM850M.h +++ b/include/configs/TQM850M.h @@ -192,6 +192,8 @@ #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ + /*----------------------------------------------------------------------- * Hardware Information Block */ diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h index 330c931cc13..e35b5b2ac1e 100644 --- a/include/configs/TQM855L.h +++ b/include/configs/TQM855L.h @@ -197,6 +197,8 @@ #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ + /*----------------------------------------------------------------------- * Hardware Information Block */ diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h index 77c2f114a2d..cd5212eff8e 100644 --- a/include/configs/TQM855M.h +++ b/include/configs/TQM855M.h @@ -232,6 +232,8 @@ #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ + /*----------------------------------------------------------------------- * Hardware Information Block */ diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h index a903c2b3421..d5838dbf372 100644 --- a/include/configs/TQM860L.h +++ b/include/configs/TQM860L.h @@ -200,6 +200,8 @@ #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ + /*----------------------------------------------------------------------- * Hardware Information Block */ diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h index b905a0a635a..684b86f2efe 100644 --- a/include/configs/TQM860M.h +++ b/include/configs/TQM860M.h @@ -199,6 +199,8 @@ #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ + /*----------------------------------------------------------------------- * Hardware Information Block */ diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h index d8ddf37fa94..f09d3d1654f 100644 --- a/include/configs/TQM862L.h +++ b/include/configs/TQM862L.h @@ -201,6 +201,8 @@ #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ + /*----------------------------------------------------------------------- * Hardware Information Block */ diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h index 50607f0e523..039aa3af428 100644 --- a/include/configs/TQM862M.h +++ b/include/configs/TQM862M.h @@ -202,6 +202,8 @@ #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ + /*----------------------------------------------------------------------- * Hardware Information Block */ diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h index ea310c42350..0d778919a2b 100644 --- a/include/configs/TQM866M.h +++ b/include/configs/TQM866M.h @@ -242,6 +242,8 @@ #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ + /*----------------------------------------------------------------------- * Hardware Information Block */ diff --git a/include/configs/cmi_mpc5xx.h b/include/configs/cmi_mpc5xx.h index 85c2b96fec7..a869364c605 100644 --- a/include/configs/cmi_mpc5xx.h +++ b/include/configs/cmi_mpc5xx.h @@ -171,8 +171,9 @@ #define CFG_ENV_IS_IN_FLASH 1 #ifdef CFG_ENV_IS_IN_FLASH -#define CFG_ENV_OFFSET 0x00020000 /* Environment starts at this adress */ -#define CFG_ENV_SIZE 0x00010000 /* Set whole sector as env */ +#define CFG_ENV_OFFSET 0x00020000 /* Environment starts at this adress */ +#define CFG_ENV_SIZE 0x00010000 /* Set whole sector as env */ +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ #endif /*----------------------------------------------------------------------- diff --git a/include/configs/hymod.h b/include/configs/hymod.h index 2f64ec238c6..2547afb3cf0 100644 --- a/include/configs/hymod.h +++ b/include/configs/hymod.h @@ -406,6 +406,7 @@ #define CFG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */ #define CFG_ENV_SECT_SIZE 0x40000 /* see README - env sect real size */ #define CFG_ENV_ADDR (CFG_FLASH_BASE+CFG_MONITOR_LEN-CFG_ENV_SECT_SIZE) +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ /*----------------------------------------------------------------------- * Cache Configuration diff --git a/include/configs/idmr.h b/include/configs/idmr.h index 404e88a4fcd..3821ebcf0d1 100644 --- a/include/configs/idmr.h +++ b/include/configs/idmr.h @@ -125,6 +125,8 @@ #define CFG_ENV_IS_IN_FLASH #endif /* !CONFIG_MONITOR_IS_IN_RAM */ +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ + #define CFG_PROMPT "=> " #define CFG_LONGHELP /* undef to save memory */ diff --git a/include/configs/trab.h b/include/configs/trab.h index dbccea28ad3..b9088a89abd 100644 --- a/include/configs/trab.h +++ b/include/configs/trab.h @@ -419,6 +419,8 @@ #define CFG_ENV_OFFSET_REDUND (CFG_ENV_ADDR+CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ + /* Initial value of the on-board touch screen brightness */ #define CFG_BRIGHTNESS 0x20 diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h index 561a8bc47b5..edae6f4b984 100644 --- a/include/configs/virtlab2.h +++ b/include/configs/virtlab2.h @@ -207,6 +207,8 @@ #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ + /*----------------------------------------------------------------------- * Hardware Information Block */ -- cgit v1.3.1 From 8a783a65851bc7421ab69f442261215e21b8891a Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Tue, 18 Sep 2007 12:24:57 -0600 Subject: Bugfix: remove embedded null (\0) from CFG_BOOTFILE macro in TQM8540_config /bin/bash and /bin/dash (which /bin/sh is linked to on ubuntu) handle embedded nulls in a string differently. For example, the following statement: echo "this is a string\0" > afile Will produce the following with /bin/bash: "this is a string\0" But with /bin/dash, will produce: "this is a string Bug fixed by moving the embedded null out of the makefile and into the config header. Also renamed the macro to avoid usage colision with the same macro used by other board ports. Signed-off-by: Grant Likely --- Makefile | 2 +- include/configs/TQM85xx.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'include/configs') diff --git a/Makefile b/Makefile index 85885b166a6..a87311ca1f9 100644 --- a/Makefile +++ b/Makefile @@ -1961,7 +1961,7 @@ TQM8560_config: unconfig echo "#define CONFIG_TQM$${CTYPE}">>$(obj)include/config.h; \ echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \ echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h; \ - echo "#define CFG_BOOTFILE \"bootfile=/tftpboot/tqm$${CTYPE}/uImage\0\"">>$(obj)include/config.h + echo "#define CFG_BOOTFILE_PATH \"/tftpboot/tqm$${CTYPE}/uImage\"">>$(obj)include/config.h @$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx ######################################################################### diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index 2f23c504930..6dbd3924bdd 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -449,7 +449,7 @@ #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ #define CONFIG_EXTRA_ENV_SETTINGS \ - CFG_BOOTFILE \ + "bootfile="CFG_BOOTFILE_PATH"\0" \ "netdev=eth0\0" \ "consdev=ttyS0\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ -- cgit v1.3.1 From 3e954beb614b5b190d7f4f4c3b641437a0132e35 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 11 Sep 2007 14:12:55 +0200 Subject: ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test) Signed-off-by: Stefan Roese --- include/configs/lwmon5.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/configs') diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index be483245b91..a9db0862f40 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -472,7 +472,7 @@ {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO55 Unselect via TraceSelect Bit */ \ {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO56 Unselect via TraceSelect Bit */ \ {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO57 Unselect via TraceSelect Bit */ \ -{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO58 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO58 Unselect via TraceSelect Bit */ \ {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO59 Unselect via TraceSelect Bit */ \ {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO60 Unselect via TraceSelect Bit */ \ {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61 Unselect via TraceSelect Bit */ \ -- cgit v1.3.1 From 87c1833a39e944db66385286fd5e28f9b3fcdd50 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 2 Oct 2007 11:44:19 +0200 Subject: ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet Signed-off-by: Stefan Roese --- include/configs/lwmon5.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/configs') diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 8ec4742c0fb..00c34d5d7b9 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -339,7 +339,12 @@ #define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ #define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */ +#if 0 +/* + * ToDo: Watchdog is not test fully, so exclude it for now + */ #define CONFIG_HW_WATCHDOG 1 /* Use external HW-Watchdog */ +#endif /* * For booting Linux, the board info and command line data -- cgit v1.3.1