From fd428c05c863aefb575b12b2a1916b02d5bfa759 Mon Sep 17 00:00:00 2001 From: Detlev Zundel Date: Fri, 12 Mar 2010 10:01:12 +0100 Subject: mpc5xxx: Remove all references to MGT5100 We do not support a processor that never reached a real customer. Signed-off-by: Detlev Zundel --- include/configs/BC3450.h | 9 ++------- include/configs/IceCube.h | 13 +------------ include/configs/PM520.h | 11 ----------- include/configs/TB5200.h | 5 ----- include/configs/TQM5200.h | 5 ----- include/configs/Total5200.h | 23 ++--------------------- include/configs/aev.h | 5 ----- include/configs/cpci5200.h | 11 ----------- include/configs/hmi1001.h | 5 ----- include/configs/inka4x0.h | 5 ----- include/configs/ipek01.h | 5 ----- include/configs/manroland/mpc5200-common.h | 5 ----- include/configs/mecp5200.h | 14 -------------- include/configs/o2dnt.h | 7 ------- include/configs/pf5200.h | 11 ----------- include/configs/smmaco4.h | 5 ----- include/configs/spieval.h | 5 ----- include/configs/v38b.h | 2 -- 18 files changed, 5 insertions(+), 141 deletions(-) (limited to 'include/configs') diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h index 8c5a742290e..44befe9edfa 100644 --- a/include/configs/BC3450.h +++ b/include/configs/BC3450.h @@ -471,13 +471,8 @@ /* * Various low-level settings */ -#if defined(CONFIG_MPC5200) -# define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -# define CONFIG_SYS_HID0_FINAL HID0_ICE -#else -# define CONFIG_SYS_HID0_INIT 0 -# define CONFIG_SYS_HID0_FINAL 0 -#endif +#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI +#define CONFIG_SYS_HID0_FINAL HID0_ICE #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h index 5ef0b7798e5..5d3a744fffc 100644 --- a/include/configs/IceCube.h +++ b/include/configs/IceCube.h @@ -30,6 +30,7 @@ */ #define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* (more precisely a MPC5200 CPU) */ #define CONFIG_ICECUBE 1 /* ... on IceCube board */ #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ @@ -47,7 +48,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } -#ifdef CONFIG_MPC5200 /* MPC5100 PCI is not supported yet. */ /* * PCI Mapping: * 0x40000000 - 0x4fffffff - PCI Memory @@ -77,10 +77,6 @@ #define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #define CONFIG_NS8382X 1 -#else -#define CONFIG_MII 1 -#endif - /* Partitions */ #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -169,7 +165,6 @@ #define CONFIG_BOOTCOMMAND "run flash_self" -#if defined(CONFIG_MPC5200) /* * IPB Bus clocking configuration. */ @@ -178,7 +173,6 @@ #else #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ #endif -#endif /* CONFIG_MPC5200 */ /* pass open firmware flat tree */ #define CONFIG_OF_LIBFDT 1 @@ -338,13 +332,8 @@ /* * Various low-level settings */ -#if defined(CONFIG_MPC5200) #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI #define CONFIG_SYS_HID0_FINAL HID0_ICE -#else -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL 0 -#endif #if defined(CONFIG_LITE5200B) #define CONFIG_SYS_CS1_START CONFIG_SYS_FLASH_BASE diff --git a/include/configs/PM520.h b/include/configs/PM520.h index f9687d2743f..22de2075f9c 100644 --- a/include/configs/PM520.h +++ b/include/configs/PM520.h @@ -50,7 +50,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } -#ifdef CONFIG_MPC5200 /* MPC5100 PCI is not supported yet. */ /* * PCI Mapping: * 0x40000000 - 0x4fffffff - PCI Memory @@ -75,7 +74,6 @@ #define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #undef CONFIG_NS8382X -#endif /* Partitions */ #define CONFIG_DOS_PARTITION @@ -111,9 +109,7 @@ #define CONFIG_CMD_SNTP #define CONFIG_CMD_USB -#if defined(CONFIG_MPC5200) #define CONFIG_CMD_PCI -#endif /* @@ -147,12 +143,10 @@ #define CONFIG_BOOTCOMMAND "run flash_self" -#if defined(CONFIG_MPC5200) /* * IPB Bus clocking configuration. */ #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ -#endif /* * I2C configuration */ @@ -301,13 +295,8 @@ /* * Various low-level settings */ -#if defined(CONFIG_MPC5200) #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI #define CONFIG_SYS_HID0_FINAL HID0_ICE -#else -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL 0 -#endif #if defined(CONFIG_BOOT_ROM) #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_BOOTROM_BASE diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h index 3438abaeaae..6da18ebca11 100644 --- a/include/configs/TB5200.h +++ b/include/configs/TB5200.h @@ -430,13 +430,8 @@ /* * Various low-level settings */ -#if defined(CONFIG_MPC5200) #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI #define CONFIG_SYS_HID0_FINAL HID0_ICE -#else -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL 0 -#endif #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 2154c7870eb..107bff19ffa 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -633,13 +633,8 @@ /* * Various low-level settings */ -#if defined(CONFIG_MPC5200) #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI #define CONFIG_SYS_HID0_FINAL HID0_ICE -#else -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL 0 -#endif #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h index 1daa5746eea..7510ab10e4d 100644 --- a/include/configs/Total5200.h +++ b/include/configs/Total5200.h @@ -41,6 +41,7 @@ */ #define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* (more precisely a MPC5200 CPU) */ #define CONFIG_TOTAL5200 1 /* ... on Total5200 board */ #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ @@ -73,7 +74,6 @@ #define CONFIG_SPLASH_SCREEN -#ifdef CONFIG_MPC5200 /* MGT5100 PCI is not supported yet. */ /* * PCI Mapping: * 0x40000000 - 0x4fffffff - PCI Memory @@ -98,12 +98,6 @@ #define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #define CONFIG_NS8382X 1 -#else /* MGT5100 */ - -#define CONFIG_MII 1 - -#endif - /* Partitions */ #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -127,9 +121,7 @@ */ #include -#if defined(CONFIG_MPC5200) - #define CONFIG_CMD_PCI -#endif +#define CONFIG_CMD_PCI #define CONFIG_CMD_BMP #define CONFIG_CMD_EEPROM @@ -176,12 +168,10 @@ #define CONFIG_BOOTCOMMAND "run flash_self" -#if defined(CONFIG_MPC5200) /* * IPB Bus clocking configuration. */ #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ -#endif /* * I2C configuration @@ -326,17 +316,8 @@ /* * Various low-level settings */ -#if defined(CONFIG_MPC5200) #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI #define CONFIG_SYS_HID0_FINAL HID0_ICE -#else -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL 0 -#endif - -#if defined (CONFIG_MGT5100) -# define CONFIG_BOARD_EARLY_INIT_R /* switch from CS_BOOT to CS0 */ -#endif #if CONFIG_TOTAL5200_REV==1 # define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE diff --git a/include/configs/aev.h b/include/configs/aev.h index 2b4826d90ea..98958a6237b 100644 --- a/include/configs/aev.h +++ b/include/configs/aev.h @@ -362,13 +362,8 @@ /* * Various low-level settings */ -#if defined(CONFIG_MPC5200) #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI #define CONFIG_SYS_HID0_FINAL HID0_ICE -#else -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL 0 -#endif #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h index 52df16af14a..f7290d6eb4b 100644 --- a/include/configs/cpci5200.h +++ b/include/configs/cpci5200.h @@ -59,7 +59,6 @@ #define CONFIG_BAUDRATE 9600 /* ... at 115200 bps */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } -#ifdef CONFIG_MPC5200 /* MPC5100 PCI is not supported yet. */ /* * PCI Mapping: * 0x40000000 - 0x4fffffff - PCI Memory @@ -90,8 +89,6 @@ #define CONFIG_NS8382X 1 #endif -#endif - /* Partitions */ #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -169,8 +166,6 @@ #define CONFIG_BOOTCOMMAND "run flash_vxworks0" -#if defined(CONFIG_MPC5200) - #define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */ #define CONFIG_SYS_NVRAM_BASE_ADDR 0xfd010000 #define CONFIG_SYS_NVRAM_SIZE 32*1024 @@ -179,7 +174,6 @@ * IPB Bus clocking configuration. */ #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ -#endif /* * I2C configuration */ @@ -303,13 +297,8 @@ /* * Various low-level settings */ -#if defined(CONFIG_MPC5200) #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI #define CONFIG_SYS_HID0_FINAL HID0_ICE -#else -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL 0 -#endif #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h index a81527ebedd..f9cdcbc3ce0 100644 --- a/include/configs/hmi1001.h +++ b/include/configs/hmi1001.h @@ -261,13 +261,8 @@ /* * Various low-level settings */ -#if defined(CONFIG_MPC5200) #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI #define CONFIG_SYS_HID0_FINAL HID0_ICE -#else -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL 0 -#endif #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h index 14f78267056..c5b1565e340 100644 --- a/include/configs/inka4x0.h +++ b/include/configs/inka4x0.h @@ -366,13 +366,8 @@ static inline void tws_data_config_output(unsigned output) /* * Various low-level settings */ -#if defined(CONFIG_MPC5200) #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI #define CONFIG_SYS_HID0_FINAL HID0_ICE -#else -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL 0 -#endif #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE diff --git a/include/configs/ipek01.h b/include/configs/ipek01.h index d0cb1e1d603..6903b361465 100644 --- a/include/configs/ipek01.h +++ b/include/configs/ipek01.h @@ -324,13 +324,8 @@ /* * Various low-level settings */ -#if defined(CONFIG_MPC5200) #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI #define CONFIG_SYS_HID0_FINAL HID0_ICE -#else -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL 0 -#endif #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE diff --git a/include/configs/manroland/mpc5200-common.h b/include/configs/manroland/mpc5200-common.h index b29ef9b6559..d25e093ac6f 100644 --- a/include/configs/manroland/mpc5200-common.h +++ b/include/configs/manroland/mpc5200-common.h @@ -170,13 +170,8 @@ /* * Various low-level settings */ -#if defined(CONFIG_MPC5200) #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI #define CONFIG_SYS_HID0_FINAL HID0_ICE -#else -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL 0 -#endif #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h index 4a93b588857..73405eabb9a 100644 --- a/include/configs/mecp5200.h +++ b/include/configs/mecp5200.h @@ -63,9 +63,6 @@ #endif #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -#ifdef CONFIG_MPC5200 /* MPC5100 PCI is not supported yet. */ - #define CONFIG_MII #if 0 /* test-only !!! */ #define CONFIG_NET_MULTI 1 @@ -74,10 +71,6 @@ #define CONFIG_NS8382X 1 #endif -#else /* MPC5100 */ - -#endif - /* Partitions */ #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -152,12 +145,10 @@ #define CONFIG_BOOTCOMMAND "run flash_vxworks0" -#if defined(CONFIG_MPC5200) /* * IPB Bus clocking configuration. */ #undef CONFIG_SYS_IPBSPEED_133 /* define for 133MHz speed */ -#endif /* * I2C configuration */ @@ -288,13 +279,8 @@ /* * Various low-level settings */ -#if defined(CONFIG_MPC5200) #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI #define CONFIG_SYS_HID0_FINAL HID0_ICE -#else -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL 0 -#endif #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE diff --git a/include/configs/o2dnt.h b/include/configs/o2dnt.h index 18e7cc2a9c6..bdc0f7944a8 100644 --- a/include/configs/o2dnt.h +++ b/include/configs/o2dnt.h @@ -138,7 +138,6 @@ #define CONFIG_BOOTCOMMAND "run flash_self" -#if defined(CONFIG_MPC5200) /* * IPB Bus clocking configuration. */ @@ -154,7 +153,6 @@ */ #define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */ #endif -#endif /* * I2C configuration @@ -276,13 +274,8 @@ /* * Various low-level settings */ -#if defined(CONFIG_MPC5200) #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI #define CONFIG_SYS_HID0_FINAL HID0_ICE -#else -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL 0 -#endif #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h index 8ca55d78ecc..80a0bc609ac 100644 --- a/include/configs/pf5200.h +++ b/include/configs/pf5200.h @@ -61,7 +61,6 @@ #endif #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } -#ifdef CONFIG_MPC5200 /* MPC5100 PCI is not supported yet. */ /* * PCI Mapping: * 0x40000000 - 0x4fffffff - PCI Memory @@ -87,7 +86,6 @@ #define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #define CONFIG_NS8382X 1 #endif -#endif /* Partitions */ #define CONFIG_MAC_PARTITION @@ -121,9 +119,7 @@ #define CONFIG_CMD_I2C #define CONFIG_CMD_IDE -#ifdef CONFIG_MPC5200 #define CONFIG_CMD_PCI -#endif #if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */ @@ -166,12 +162,10 @@ #define CONFIG_BOOTCOMMAND "run flash_vxworks0" -#if defined(CONFIG_MPC5200) /* * IPB Bus clocking configuration. */ #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ -#endif /* * I2C configuration */ @@ -289,13 +283,8 @@ /* * Various low-level settings */ -#if defined(CONFIG_MPC5200) #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI #define CONFIG_SYS_HID0_FINAL HID0_ICE -#else -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL 0 -#endif #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE diff --git a/include/configs/smmaco4.h b/include/configs/smmaco4.h index 5a2ef3aa8c3..060026bb64d 100644 --- a/include/configs/smmaco4.h +++ b/include/configs/smmaco4.h @@ -358,13 +358,8 @@ /* * Various low-level settings */ -#if defined(CONFIG_MPC5200) #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI #define CONFIG_SYS_HID0_FINAL HID0_ICE -#else -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL 0 -#endif #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE diff --git a/include/configs/spieval.h b/include/configs/spieval.h index 27dda253fb3..d377e199d84 100644 --- a/include/configs/spieval.h +++ b/include/configs/spieval.h @@ -438,13 +438,8 @@ /* * Various low-level settings */ -#if defined(CONFIG_MPC5200) #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI #define CONFIG_SYS_HID0_FINAL HID0_ICE -#else -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL 0 -#endif #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE diff --git a/include/configs/v38b.h b/include/configs/v38b.h index 92bcdb33fb8..d462ed0f1eb 100644 --- a/include/configs/v38b.h +++ b/include/configs/v38b.h @@ -170,12 +170,10 @@ #define CONFIG_BOOTCOMMAND "run net_nfs" -#if defined(CONFIG_MPC5200) /* * IPB Bus clocking configuration. */ #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ -#endif /* * I2C configuration -- cgit v1.3.1 From 9d79e5758c3a6776be9a86856823d28e7154a481 Mon Sep 17 00:00:00 2001 From: Wolfgang Wegner Date: Mon, 25 Jan 2010 11:27:44 +0100 Subject: add ASTRO MCF5373L board This patch adds support for ASTRO board(s) based on MCF5373L. Signed-off-by: Wolfgang Wegner --- MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 4 + board/astro/mcf5373l/Makefile | 44 ++++ board/astro/mcf5373l/astro.h | 44 ++++ board/astro/mcf5373l/config.mk | 27 +++ board/astro/mcf5373l/fpga.c | 425 +++++++++++++++++++++++++++++++++++++++ board/astro/mcf5373l/mcf5373l.c | 211 +++++++++++++++++++ board/astro/mcf5373l/u-boot.lds | 142 +++++++++++++ include/configs/astro_mcf5373l.h | 389 +++++++++++++++++++++++++++++++++++ 10 files changed, 1291 insertions(+) create mode 100644 board/astro/mcf5373l/Makefile create mode 100644 board/astro/mcf5373l/astro.h create mode 100644 board/astro/mcf5373l/config.mk create mode 100644 board/astro/mcf5373l/fpga.c create mode 100644 board/astro/mcf5373l/mcf5373l.c create mode 100644 board/astro/mcf5373l/u-boot.lds create mode 100644 include/configs/astro_mcf5373l.h (limited to 'include/configs') diff --git a/MAINTAINERS b/MAINTAINERS index 0abeb26dcd6..bb03f17784e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -889,6 +889,10 @@ TsiChung Liew M5475EVB mcf547x_8x M5485EVB mcf547x_8x +Wolfgang Wegner + + astro_mcf5373l MCF5373L + ######################################################################### # AVR32 Systems: # # # diff --git a/MAKEALL b/MAKEALL index 2eb8bb6b8bb..eec02a35880 100755 --- a/MAKEALL +++ b/MAKEALL @@ -839,6 +839,7 @@ LIST_microblaze=" \ ######################################################################### LIST_coldfire=" \ + astro_mcf5373l \ cobra5272 \ EB+MCF-EV123 \ EB+MCF-EV123_internal \ diff --git a/Makefile b/Makefile index 398e94de8e7..e004303a810 100644 --- a/Makefile +++ b/Makefile @@ -1976,6 +1976,10 @@ ZPC1900_config: unconfig ## Coldfire ######################################################################### +astro_mcf5373l_config \ +astro_mcf5373l_RAM_config : unconfig + @$(MKCONFIG) -t $(@:_config=) astro_mcf5373l m68k mcf532x mcf5373l astro + M5208EVBE_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5208evbe freescale diff --git a/board/astro/mcf5373l/Makefile b/board/astro/mcf5373l/Makefile new file mode 100644 index 00000000000..c7a1d055187 --- /dev/null +++ b/board/astro/mcf5373l/Makefile @@ -0,0 +1,44 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o fpga.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/astro/mcf5373l/astro.h b/board/astro/mcf5373l/astro.h new file mode 100644 index 00000000000..b55a6f785ce --- /dev/null +++ b/board/astro/mcf5373l/astro.h @@ -0,0 +1,44 @@ +#ifndef __ASTRO_H__ +#define __ASTRO_H__ + +/* in mcf5373l.c */ +int rs_serial_init(int port, int baud); +void astro_put_char(char ch); +int astro_is_char(void); +int astro_get_char(void); + +/* in fpga.c */ +int astro5373l_altera_load(void); +int astro5373l_xilinx_load(void); + +/* data structures used for communication (update.c) */ +typedef struct card_id { + char card_type; + char hardware_version; + char software_version; + char software_subversion; /* " ","a".."z" */ + char fpga_version_altera; + char fpga_version_xilinx; +} card_id_t; + +typedef struct { + unsigned char mode; + unsigned char deviation; + unsigned short freq; +} __attribute__ ((packed)) output_params_t; + +typedef struct { + unsigned short satfreq; + unsigned char satdatallg; + unsigned short symbolrate; + unsigned char viterbirate; + unsigned char symbolrate_l; + output_params_t output_params; + unsigned char reserve; + unsigned char card_error; + unsigned short dummy_ts_id; + unsigned char dummy_pat_ver; + unsigned char dummy_sdt_ver; +} __attribute__ ((packed)) parameters_t; + +#endif /* __ASTRO_H__ */ diff --git a/board/astro/mcf5373l/config.mk b/board/astro/mcf5373l/config.mk new file mode 100644 index 00000000000..6316a3029ac --- /dev/null +++ b/board/astro/mcf5373l/config.mk @@ -0,0 +1,27 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Coldfire contribution by Bernhard Kuhn +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = $(CONFIG_TEXT_BASE) + +PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) diff --git a/board/astro/mcf5373l/fpga.c b/board/astro/mcf5373l/fpga.c new file mode 100644 index 00000000000..467461b8e80 --- /dev/null +++ b/board/astro/mcf5373l/fpga.c @@ -0,0 +1,425 @@ +/* + * (C) Copyright 2006 + * Wolfgang Wegner, ASTRO Strobel Kommunikationssysteme GmbH, + * w.wegner@astro-kom.de + * + * based on the files by + * Heiko Schocher, DENX Software Engineering, hs@denx.de + * and + * Rich Ireland, Enterasys Networks, rireland@enterasys.com. + * Keith Outwater, keith_outwater@mvis.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +/* Altera/Xilinx FPGA configuration support for the ASTRO "URMEL" board */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "fpga.h" + +DECLARE_GLOBAL_DATA_PTR; + +int altera_pre_fn(int cookie) +{ + gpio_t *gpiop = (gpio_t *)MMAP_GPIO; + unsigned char tmp_char; + unsigned short tmp_short; + + /* first, set the required pins to GPIO function */ + /* PAR_T0IN -> GPIO */ + tmp_char = readb(&gpiop->par_timer); + tmp_char &= 0xfc; + writeb(tmp_char, &gpiop->par_timer); + /* all QSPI pins -> GPIO */ + writew(0x0000, &gpiop->par_qspi); + /* U0RTS, U0CTS -> GPIO */ + tmp_short = __raw_readw(&gpiop->par_uart); + tmp_short &= 0xfff3; + __raw_writew(tmp_short, &gpiop->par_uart); + /* all PWM pins -> GPIO */ + writeb(0x00, &gpiop->par_pwm); + /* next, set data direction registers */ + writeb(0x01, &gpiop->pddr_timer); + writeb(0x25, &gpiop->pddr_qspi); + writeb(0x0c, &gpiop->pddr_uart); + writeb(0x04, &gpiop->pddr_pwm); + + /* ensure other SPI peripherals are deselected */ + writeb(0x08, &gpiop->ppd_uart); + writeb(0x38, &gpiop->ppd_qspi); + + /* CONFIG = 0 STATUS = 0 -> FPGA in reset state */ + writeb(0xFB, &gpiop->pclrr_uart); + /* enable Altera configuration by clearing QSPI_CS2 and DT0IN */ + writeb(0xFE, &gpiop->pclrr_timer); + writeb(0xDF, &gpiop->pclrr_qspi); + return FPGA_SUCCESS; +} + +/* Set the state of CONFIG Pin */ +int altera_config_fn(int assert_config, int flush, int cookie) +{ + gpio_t *gpiop = (gpio_t *)MMAP_GPIO; + + if (assert_config) + writeb(0x04, &gpiop->ppd_uart); + else + writeb(0xFB, &gpiop->pclrr_uart); + return FPGA_SUCCESS; +} + +/* Returns the state of STATUS Pin */ +int altera_status_fn(int cookie) +{ + gpio_t *gpiop = (gpio_t *)MMAP_GPIO; + + if (readb(&gpiop->ppd_pwm) & 0x08) + return FPGA_FAIL; + return FPGA_SUCCESS; +} + +/* Returns the state of CONF_DONE Pin */ +int altera_done_fn(int cookie) +{ + gpio_t *gpiop = (gpio_t *)MMAP_GPIO; + + if (readb(&gpiop->ppd_pwm) & 0x20) + return FPGA_FAIL; + return FPGA_SUCCESS; +} + +/* + * writes the complete buffer to the FPGA + * writing the complete buffer in one function is much faster, + * then calling it for every bit + */ +int altera_write_fn(void *buf, size_t len, int flush, int cookie) +{ + size_t bytecount = 0; + gpio_t *gpiop = (gpio_t *)MMAP_GPIO; + unsigned char *data = (unsigned char *)buf; + unsigned char val = 0; + int i; + int len_40 = len / 40; + + while (bytecount < len) { + val = data[bytecount++]; + i = 8; + do { + writeb(0xFB, &gpiop->pclrr_qspi); + if (val & 0x01) + writeb(0x01, &gpiop->ppd_qspi); + else + writeb(0xFE, &gpiop->pclrr_qspi); + writeb(0x04, &gpiop->ppd_qspi); + val >>= 1; + i--; + } while (i > 0); + + if (bytecount % len_40 == 0) { +#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG) + WATCHDOG_RESET(); +#endif +#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK + putc('.'); /* let them know we are alive */ +#endif +#ifdef CONFIG_SYS_FPGA_CHECK_CTRLC + if (ctrlc()) + return FPGA_FAIL; +#endif + } + } + return FPGA_SUCCESS; +} + +/* called, when programming is aborted */ +int altera_abort_fn(int cookie) +{ + gpio_t *gpiop = (gpio_t *)MMAP_GPIO; + + writeb(0x20, &gpiop->ppd_qspi); + writeb(0x08, &gpiop->ppd_uart); + return FPGA_SUCCESS; +} + +/* called, when programming was succesful */ +int altera_post_fn(int cookie) +{ + return altera_abort_fn(cookie); +} + +/* + * Note that these are pointers to code that is in Flash. They will be + * relocated at runtime. + * FIXME: relocation not yet working for coldfire, see below! + */ +Altera_CYC2_Passive_Serial_fns altera_fns = { + altera_pre_fn, + altera_config_fn, + altera_status_fn, + altera_done_fn, + altera_write_fn, + altera_abort_fn, + altera_post_fn +}; + +Altera_desc altera_fpga[CONFIG_FPGA_COUNT] = { + {Altera_CYC2, + passive_serial, + 85903, + (void *)&altera_fns, + NULL, + 0} +}; + +/* Initialize the fpga. Return 1 on success, 0 on failure. */ +int astro5373l_altera_load(void) +{ + int i; + + for (i = 0; i < CONFIG_FPGA_COUNT; i++) { + /* + * I did not yet manage to get relocation work properly, + * so set stuff here instead of static initialisation: + */ + altera_fns.pre = altera_pre_fn; + altera_fns.config = altera_config_fn; + altera_fns.status = altera_status_fn; + altera_fns.done = altera_done_fn; + altera_fns.write = altera_write_fn; + altera_fns.abort = altera_abort_fn; + altera_fns.post = altera_post_fn; + altera_fpga[i].iface_fns = (void *)&altera_fns; + fpga_add(fpga_altera, &altera_fpga[i]); + } + return 1; +} + +/* Set the FPGA's PROG_B line to the specified level */ +int xilinx_pgm_fn(int assert, int flush, int cookie) +{ + gpio_t *gpiop = (gpio_t *)MMAP_GPIO; + + if (assert) + writeb(0xFB, &gpiop->pclrr_uart); + else + writeb(0x04, &gpiop->ppd_uart); + return assert; +} + +/* + * Test the state of the active-low FPGA INIT line. Return 1 on INIT + * asserted (low). + */ +int xilinx_init_fn(int cookie) +{ + gpio_t *gpiop = (gpio_t *)MMAP_GPIO; + + return (readb(&gpiop->ppd_pwm) & 0x08) == 0; +} + +/* Test the state of the active-high FPGA DONE pin */ +int xilinx_done_fn(int cookie) +{ + gpio_t *gpiop = (gpio_t *)MMAP_GPIO; + + return (readb(&gpiop->ppd_pwm) & 0x20) >> 5; +} + +/* Abort an FPGA operation */ +int xilinx_abort_fn(int cookie) +{ + gpio_t *gpiop = (gpio_t *)MMAP_GPIO; + /* ensure all SPI peripherals and FPGAs are deselected */ + writeb(0x08, &gpiop->ppd_uart); + writeb(0x01, &gpiop->ppd_timer); + writeb(0x38, &gpiop->ppd_qspi); + return FPGA_FAIL; +} + +/* + * FPGA pre-configuration function. Just make sure that + * FPGA reset is asserted to keep the FPGA from starting up after + * configuration. + */ +int xilinx_pre_config_fn(int cookie) +{ + gpio_t *gpiop = (gpio_t *)MMAP_GPIO; + unsigned char tmp_char; + unsigned short tmp_short; + + /* first, set the required pins to GPIO function */ + /* PAR_T0IN -> GPIO */ + tmp_char = readb(&gpiop->par_timer); + tmp_char &= 0xfc; + writeb(tmp_char, &gpiop->par_timer); + /* all QSPI pins -> GPIO */ + writew(0x0000, &gpiop->par_qspi); + /* U0RTS, U0CTS -> GPIO */ + tmp_short = __raw_readw(&gpiop->par_uart); + tmp_short &= 0xfff3; + __raw_writew(tmp_short, &gpiop->par_uart); + /* all PWM pins -> GPIO */ + writeb(0x00, &gpiop->par_pwm); + /* next, set data direction registers */ + writeb(0x01, &gpiop->pddr_timer); + writeb(0x25, &gpiop->pddr_qspi); + writeb(0x0c, &gpiop->pddr_uart); + writeb(0x04, &gpiop->pddr_pwm); + + /* ensure other SPI peripherals are deselected */ + writeb(0x08, &gpiop->ppd_uart); + writeb(0x38, &gpiop->ppd_qspi); + writeb(0x01, &gpiop->ppd_timer); + + /* CONFIG = 0, STATUS = 0 -> FPGA in reset state */ + writeb(0xFB, &gpiop->pclrr_uart); + /* enable Xilinx configuration by clearing QSPI_CS2 and U0CTS */ + writeb(0xF7, &gpiop->pclrr_uart); + writeb(0xDF, &gpiop->pclrr_qspi); + return 0; +} + +/* + * FPGA post configuration function. Should perform a test if FPGA is running. + */ +int xilinx_post_config_fn(int cookie) +{ + int rc = 0; + + /* + * no test yet + */ + return rc; +} + +int xilinx_clk_fn(int assert_clk, int flush, int cookie) +{ + gpio_t *gpiop = (gpio_t *)MMAP_GPIO; + + if (assert_clk) + writeb(0x04, &gpiop->ppd_qspi); + else + writeb(0xFB, &gpiop->pclrr_qspi); + return assert_clk; +} + +int xilinx_wr_fn(int assert_write, int flush, int cookie) +{ + gpio_t *gpiop = (gpio_t *)MMAP_GPIO; + + if (assert_write) + writeb(0x01, &gpiop->ppd_qspi); + else + writeb(0xFE, &gpiop->pclrr_qspi); + return assert_write; +} + +int xilinx_fastwr_fn(void *buf, size_t len, int flush, int cookie) +{ + size_t bytecount = 0; + gpio_t *gpiop = (gpio_t *)MMAP_GPIO; + unsigned char *data = (unsigned char *)buf; + unsigned char val = 0; + int i; + int len_40 = len / 40; + + for (bytecount = 0; bytecount < len; bytecount++) { + val = *(data++); + for (i = 8; i > 0; i--) { + writeb(0xFB, &gpiop->pclrr_qspi); + if (val & 0x80) + writeb(0x01, &gpiop->ppd_qspi); + else + writeb(0xFE, &gpiop->pclrr_qspi); + writeb(0x04, &gpiop->ppd_qspi); + val <<= 1; + } + if (bytecount % len_40 == 0) { +#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG) + WATCHDOG_RESET(); +#endif +#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK + putc('.'); /* let them know we are alive */ +#endif +#ifdef CONFIG_SYS_FPGA_CHECK_CTRLC + if (ctrlc()) + return FPGA_FAIL; +#endif + } + } + return FPGA_SUCCESS; +} + +/* + * Note that these are pointers to code that is in Flash. They will be + * relocated at runtime. + * FIXME: relocation not yet working for coldfire, see below! + */ +Xilinx_Spartan3_Slave_Serial_fns xilinx_fns = { + xilinx_pre_config_fn, + xilinx_pgm_fn, + xilinx_clk_fn, + xilinx_init_fn, + xilinx_done_fn, + xilinx_wr_fn, + 0, + xilinx_fastwr_fn +}; + +Xilinx_desc xilinx_fpga[CONFIG_FPGA_COUNT] = { + {Xilinx_Spartan3, + slave_serial, + XILINX_XC3S4000_SIZE, + (void *)&xilinx_fns, + 0} +}; + +/* Initialize the fpga. Return 1 on success, 0 on failure. */ +int astro5373l_xilinx_load(void) +{ + int i; + + fpga_init(); + + for (i = 0; i < CONFIG_FPGA_COUNT; i++) { + /* + * I did not yet manage to get relocation work properly, + * so set stuff here instead of static initialisation: + */ + xilinx_fns.pre = xilinx_pre_config_fn; + xilinx_fns.pgm = xilinx_pgm_fn; + xilinx_fns.clk = xilinx_clk_fn; + xilinx_fns.init = xilinx_init_fn; + xilinx_fns.done = xilinx_done_fn; + xilinx_fns.wr = xilinx_wr_fn; + xilinx_fns.bwr = xilinx_fastwr_fn; + xilinx_fpga[i].iface_fns = (void *)&xilinx_fns; + fpga_add(fpga_xilinx, &xilinx_fpga[i]); + } + return 1; +} diff --git a/board/astro/mcf5373l/mcf5373l.c b/board/astro/mcf5373l/mcf5373l.c new file mode 100644 index 00000000000..3c09a21eed8 --- /dev/null +++ b/board/astro/mcf5373l/mcf5373l.c @@ -0,0 +1,211 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * modified by Wolfgang Wegner for ASTRO 5373l + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +/* needed for astro bus: */ +#include +#include "astro.h" + +DECLARE_GLOBAL_DATA_PTR; +extern void uart_port_conf(void); + +int checkboard(void) +{ + puts("Board: "); + puts("ASTRO MCF5373L (Urmel) Board\n"); + return 0; +} + +phys_size_t initdram(int board_type) +{ +#if !defined(CONFIG_MONITOR_IS_IN_RAM) + sdram_t *sdp = (sdram_t *)(MMAP_SDRAM); + + /* + * GPIO configuration for bus should be set correctly from reset, + * so we do not care! First, set up address space: at this point, + * we should be running from internal SRAM; + * so use CONFIG_SYS_SDRAM_BASE as the base address for SDRAM, + * and do not care where it is + */ + __raw_writel((CONFIG_SYS_SDRAM_BASE & 0xFFF00000) | 0x00000018, + &sdp->cs0); + __raw_writel((CONFIG_SYS_SDRAM_BASE & 0xFFF00000) | 0x00000000, + &sdp->cs1); + /* + * I am not sure from the data sheet, but it seems burst length + * has to be 8 for the 16 bit data bus we use; + * so these values are for BL = 8 + */ + __raw_writel(0x33211530, &sdp->cfg1); + __raw_writel(0x56570000, &sdp->cfg2); + /* send PrechargeALL, REF and IREF remain cleared! */ + __raw_writel(0xE1462C02, &sdp->ctrl); + udelay(1); + /* refresh SDRAM twice */ + __raw_writel(0xE1462C04, &sdp->ctrl); + udelay(1); + __raw_writel(0xE1462C04, &sdp->ctrl); + /* init MR */ + __raw_writel(0x008D0000, &sdp->mode); + /* initialize EMR */ + __raw_writel(0x80010000, &sdp->mode); + /* wait until DLL is locked */ + udelay(1); + /* + * enable automatic refresh, lock mode register, + * clear iref and ipall + */ + __raw_writel(0x71462C00, &sdp->ctrl); + /* Dummy write to start SDRAM */ + writel(0, CONFIG_SYS_SDRAM_BASE); +#endif + + /* + * for get_ram_size() to work, both CS areas have to be + * configured, i.e. CS1 has to be explicitely disabled, else + * probing for memory will cause the SDRAM bus to hang! + * (Do not rely on the SDCS register(s) being set to 0x00000000 + * during reset as stated in the data sheet.) + */ + return get_ram_size((unsigned long *)CONFIG_SYS_SDRAM_BASE, + 0x80000000 - CONFIG_SYS_SDRAM_BASE); +} + +#define UART_BASE MMAP_UART0 +int rs_serial_init(int port, int baud) +{ + uart_t *uart; + u32 counter; + + switch (port) { + case 0: + uart = (uart_t *)(MMAP_UART0); + break; + case 1: + uart = (uart_t *)(MMAP_UART1); + break; + case 2: + uart = (uart_t *)(MMAP_UART2); + break; + default: + uart = (uart_t *)(MMAP_UART0); + } + + uart_port_conf(); + + /* write to SICR: SIM2 = uart mode,dcd does not affect rx */ + writeb(UART_UCR_RESET_RX, &uart->ucr); + writeb(UART_UCR_RESET_TX, &uart->ucr); + writeb(UART_UCR_RESET_ERROR, &uart->ucr); + writeb(UART_UCR_RESET_MR, &uart->ucr); + __asm__ ("nop"); + + writeb(0, &uart->uimr); + + /* write to CSR: RX/TX baud rate from timers */ + writeb(UART_UCSR_RCS_SYS_CLK | UART_UCSR_TCS_SYS_CLK, &uart->ucsr); + + writeb(UART_UMR_BC_8 | UART_UMR_PM_NONE, &uart->umr); + writeb(UART_UMR_SB_STOP_BITS_1, &uart->umr); + + /* Setting up BaudRate */ + counter = (u32) (gd->bus_clk / (baud)); + counter >>= 5; + + /* write to CTUR: divide counter upper byte */ + writeb((u8) ((counter & 0xff00) >> 8), &uart->ubg1); + /* write to CTLR: divide counter lower byte */ + writeb((u8) (counter & 0x00ff), &uart->ubg2); + + writeb(UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED, &uart->ucr); + + return 0; +} + +void astro_put_char(char ch) +{ + uart_t *uart; + unsigned long timer; + + uart = (uart_t *)(MMAP_UART0); + /* + * Wait for last character to go. Timeout of 6ms should + * be enough for our lowest baud rate of 2400. + */ + timer = get_timer(0); + while (get_timer(timer) < 6) { + if (readb(&uart->usr) & UART_USR_TXRDY) + break; + } + writeb(ch, &uart->utb); + + return; +} + +int astro_is_char(void) +{ + uart_t *uart; + + uart = (uart_t *)(MMAP_UART0); + return readb(&uart->usr) & UART_USR_RXRDY; +} + +int astro_get_char(void) +{ + uart_t *uart; + + uart = (uart_t *)(MMAP_UART0); + while (!(readb(&uart->usr) & UART_USR_RXRDY)) ; + return readb(&uart->urb); +} + +int misc_init_r(void) +{ + int retval = 0; + + puts("Configure Xilinx FPGA..."); + retval = astro5373l_xilinx_load(); + if (!retval) { + puts("failed!\n"); + return retval; + } + puts("done\n"); + + puts("Configure Altera FPGA..."); + retval = astro5373l_altera_load(); + if (!retval) { + puts("failed!\n"); + return retval; + } + puts("done\n"); + + return retval; +} diff --git a/board/astro/mcf5373l/u-boot.lds b/board/astro/mcf5373l/u-boot.lds new file mode 100644 index 00000000000..a9a4e0a233a --- /dev/null +++ b/board/astro/mcf5373l/u-boot.lds @@ -0,0 +1,142 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mcf532x/start.o (.text) + lib_m68k/traps.o (.text) + lib_m68k/interrupts.o (.text) + common/dlmalloc.o (.text) + lib_generic/zlib.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/env_embedded.o (.text) + + *(.text) +/* *(.fixup)*/ + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + __got_start = .; + *(.got) + __got_end = .; + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + _sbss = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + _end = . ; + PROVIDE (end = .); +} diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h new file mode 100644 index 00000000000..1fe42f682a7 --- /dev/null +++ b/include/configs/astro_mcf5373l.h @@ -0,0 +1,389 @@ +/* + * Configuration settings for the Sentec Cobra Board. + * + * (C) Copyright 2003 Josef Baumgartner + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * configuration for ASTRO "Urmel" board. + * Originating from Cobra5272 configuration, messed up by + * Wolfgang Wegner + * Please do not bother the original author with bug reports + * concerning this file. + */ + +#ifndef _CONFIG_ASTRO_MCF5373L_H +#define _CONFIG_ASTRO_MCF5373L_H + +/* + * set the card type to actually compile for; either of + * the possibilities listed below has to be used! + */ +#define CONFIG_ASTRO_V532 1 + +#if CONFIG_ASTRO_V532 +#define ASTRO_ID 0xF8 +#elif CONFIG_ASTRO_V512 +#define ASTRO_ID 0xFA +#elif CONFIG_ASTRO_TWIN7S2 +#define ASTRO_ID 0xF9 +#elif CONFIG_ASTRO_V912 +#define ASTRO_ID 0xFC +#elif CONFIG_ASTRO_COFDMDUOS2 +#define ASTRO_ID 0xFB +#else +#error No card type defined! +#endif + +/* + * Define processor + * possible values for Urmel board: only Coldfire M5373 processor supported + * (please do not change) + */ + +/* it seems not clear yet which processor defines we should use */ +#define CONFIG_MCF537x /* define processor family */ +#define CONFIG_MCF532x /* define processor family */ +#define CONFIG_M5373 /* define processor type */ +#define CONFIG_ASTRO5373L /* define board type */ + +/* Command line configuration */ +#include + +/* + * CONFIG_MK_RAM defines if u-boot is loaded via BDM (or started from + * a different bootloader that has already performed RAM setup) or + * started directly from flash, which is the regular case for production + * boards. + */ +#ifdef CONFIG_MK_RAM +#define CONFIG_MONITOR_IS_IN_RAM +#define CONFIG_TEXT_BASE 0x40020000 +#define ENABLE_JFFS 0 +#else +#define CONFIG_TEXT_BASE 0x00000000 +#define ENABLE_JFFS 1 +#endif + +/* Define which commmands should be available at u-boot command prompt */ + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC +#define CONFIG_CMD_XIMG +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS +#if ENABLE_JFFS +#define CONFIG_CMD_JFFS2 +#endif +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_FPGA +#define CONFIG_CMDLINE_EDITING + +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +#define CONFIG_MCFRTC +#undef RTC_DEBUG + +/* Timer */ +#define CONFIG_MCFTMR +#undef CONFIG_MCFPIT + +/* I2C */ +#define CONFIG_FSL_I2C +#define CONFIG_HARD_I2C /* I2C with hw support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_SYS_I2C_SPEED 80000 +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_OFFSET 0x58000 +#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR + +/* + * Defines processor clock - important for correct timings concerning serial + * interface etc. + * CONFIG_SYS_HZ gives unit: 1000 -> 1 Hz ^= 1000 ms + */ + +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_CLK 80000000 +#define CONFIG_SYS_CPU_CLK (CONFIG_SYS_CLK * 3) +#define CONFIG_SYS_SDRAM_SIZE 32 /* SDRAM size in MB */ + +#define CONFIG_SYS_CORE_SRAM_SIZE 0x8000 +#define CONFIG_SYS_CORE_SRAM 0x80000000 + +#define CONFIG_SYS_UNIFY_CACHE + +/* + * Define baudrate for UART1 (console output, tftp, ...) + * default value of CONFIG_BAUDRATE for Sentec board: 19200 baud + * CONFIG_SYS_BAUDRATE_TABLE defines values that can be selected + * in u-boot command interface + */ + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } + +#define CONFIG_MCFUART +#define CONFIG_SYS_UART_PORT (2) +#define CONFIG_SYS_UART2_ALT3_GPIO + +/* + * Watchdog configuration; Watchdog is disabled for running from RAM + * and set to highest possible value else. Beware there is no check + * in the watchdog code to validate the timeout value set here! + */ + +#ifndef CONFIG_MONITOR_IS_IN_RAM +#define CONFIG_WATCHDOG +#define CONFIG_WATCHDOG_TIMEOUT 3355 /* timeout in milliseconds */ +#endif + +/* + * Configuration for environment + * Environment is located in the last sector of the flash + */ + +#ifndef CONFIG_MONITOR_IS_IN_RAM +#define CONFIG_ENV_OFFSET 0x1FF8000 +#define CONFIG_ENV_SECT_SIZE 0x8000 +#define CONFIG_ENV_IS_IN_FLASH 1 +#else +/* + * environment in RAM - This is used to use a single PC-based application + * to load an image, load U-Boot, load an environment and then start U-Boot + * to execute the commands from the environment. Feedback is done via setting + * and reading memory locations. + */ +#define CONFIG_ENV_ADDR 0x40060000 +#define CONFIG_ENV_SECT_SIZE 0x8000 +#define CONFIG_ENV_IS_IN_FLASH 1 +#endif + +/* here we put our FPGA configuration... */ +#define CONFIG_MISC_INIT_R 1 + +/* Define user parameters that have to be customized most likely */ + +/* AUTOBOOT settings - booting images automatically by u-boot after power on */ + +/* + * used for autoboot, delay in seconds u-boot will wait before starting + * defined (auto-)boot command, setting to -1 disables delay, setting to + * 0 will too prevent access to u-boot command interface: u-boot then has + * to be reflashed + * beware - watchdog is not serviced during autoboot delay time! + */ +#ifdef CONFIG_MONITOR_IS_IN_RAM +#define CONFIG_BOOTDELAY 1 +#else +#define CONFIG_BOOTDELAY 1 +#endif + +/* + * The following settings will be contained in the environment block ; if you + * want to use a neutral environment all those settings can be manually set in + * u-boot: 'set' command + */ + +#define _QUOTEME(x) #x +#define QUOTEME(x) _QUOTEME(x) + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loaderversion=11\0" \ + "card_id="QUOTEME(ASTRO_ID)"\0" \ + "alterafile=0\0" \ + "xilinxfile=0\0" \ + "xilinxload=imxtract 0x540000 $xilinxfile 0x41000000&&"\ + "fpga load 0 0x41000000 $filesize\0" \ + "alteraload=imxtract 0x6c0000 $alterafile 0x41000000&&"\ + "fpga load 1 0x41000000 $filesize\0" \ + "env_default=1\0" \ + "env_check=if test $env_default -eq 1;"\ + " then setenv env_default 0;saveenv;fi\0" + +/* + * "update" is a non-standard command that has to be supplied + * by external update.c; This is not included in mainline because + * it needs non-blocking CFI routines. + */ +#ifdef CONFIG_MONITOR_IS_IN_RAM +#define CONFIG_BOOTCOMMAND "" /* no autoboot in this case */ +#else +#if CONFIG_ASTRO_V532 +#define CONFIG_BOOTCOMMAND "protect off 0x80000 0x1ffffff;run env_check;"\ + "run xilinxload&&run alteraload&&bootm 0x80000;"\ + "update;reset" +#else +#define CONFIG_BOOTCOMMAND "protect off 0x80000 0x1ffffff;run env_check;"\ + "run xilinxload&&bootm 0x80000;update;reset" +#endif +#endif + +/* default bootargs that are considered during boot */ +#define CONFIG_BOOTARGS " console=ttyS2,115200 rootfstype=romfs"\ + " loaderversion=$loaderversion" + +#define CONFIG_SYS_PROMPT "URMEL > " + +/* default RAM address for user programs */ +#define CONFIG_SYS_LOAD_ADDR 0x20000 + +#define CONFIG_SYS_LONGHELP + +#if (CONFIG_COMMANDS & CONFIG_CMD_KGDB) +#define CONFIG_SYS_CBSIZE 1024 +#else +#define CONFIG_SYS_CBSIZE 256 +#endif +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_FPGA_COUNT 1 +#define CONFIG_FPGA +#define CONFIG_FPGA_XILINX +#define CONFIG_FPGA_SPARTAN3 +#define CONFIG_FPGA_ALTERA +#define CONFIG_FPGA_CYCLON2 +#define CONFIG_SYS_FPGA_PROG_FEEDBACK +#define CONFIG_SYS_FPGA_WAIT 1000 + +/* End of user parameters to be customized */ + +/* Defines memory range for test */ + +#define CONFIG_SYS_MEMTEST_START 0x40020000 +#define CONFIG_SYS_MEMTEST_END 0x41ffffff + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ + +/* Base register address */ + +#define CONFIG_SYS_MBAR 0xFC000000 /* Register Base Addrs */ + +/* System Conf. Reg. & System Protection Reg. */ + +#define CONFIG_SYS_SCR 0x0003; +#define CONFIG_SYS_SPR 0xffff; + +/* + * Definitions for initial stack pointer and data area (in internal SRAM) + */ +#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 +#define CONFIG_SYS_INIT_RAM_END 0x8000 +#define CONFIG_SYS_INIT_RAM_CTRL 0x221 +#define CONFIG_SYS_GBL_DATA_SIZE 128 +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ + CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +/* + * Start addresses for the final memory configuration + * (Set up by the startup code) + * for MCF5373, the allowable range is 0x40000000 to 0x7FF00000 + */ +#define CONFIG_SYS_SDRAM_BASE 0x40000000 + +/* + * Chipselect bank definitions + * + * CS0 - Flash 32MB (first 16MB) + * CS1 - Flash 32MB (second half) + * CS2 - FPGA + * CS3 - FPGA + * CS4 - unused + * CS5 - unused + */ +#define CONFIG_SYS_CS0_BASE 0 +#define CONFIG_SYS_CS0_MASK 0x00ff0001 +#define CONFIG_SYS_CS0_CTRL 0x00001fc0 + +#define CONFIG_SYS_CS1_BASE 0x01000000 +#define CONFIG_SYS_CS1_MASK 0x00ff0001 +#define CONFIG_SYS_CS1_CTRL 0x00001fc0 + +#define CONFIG_SYS_CS2_BASE 0x20000000 +#define CONFIG_SYS_CS2_MASK 0x00ff0001 +#define CONFIG_SYS_CS2_CTRL 0x0000fec0 + +#define CONFIG_SYS_CS3_BASE 0x21000000 +#define CONFIG_SYS_CS3_MASK 0x00ff0001 +#define CONFIG_SYS_CS3_CTRL 0x0000fec0 + +#define CONFIG_SYS_FLASH_BASE 0x00000000 + +#ifdef CONFIG_MONITOR_IS_IN_RAM +#define CONFIG_SYS_MONITOR_BASE CONFIG_TEXT_BASE +#else +/* This is mainly used during relocation in start.S */ +#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) +#endif +/* Reserve 256 kB for Monitor */ +#define CONFIG_SYS_MONITOR_LEN (256 << 10) + +#define CONFIG_SYS_BOOTPARAMS_LEN (64 * 1024) +/* Reserve 128 kB for malloc() */ +#define CONFIG_SYS_MALLOC_LEN (128 << 10) + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization ?? + */ +#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + \ + (CONFIG_SYS_SDRAM_SIZE << 20)) + +/* FLASH organization */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_SECT 259 +#define CONFIG_SYS_FLASH_ERASE_TOUT 1000 + +#define CONFIG_SYS_FLASH_CFI 1 +#define CONFIG_FLASH_CFI_DRIVER 1 +#define CONFIG_SYS_FLASH_SIZE 0x2000000 +#define CONFIG_SYS_FLASH_PROTECTION 1 +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 +#define CONFIG_SYS_FLASH_CFI_NONBLOCK 1 + +#if ENABLE_JFFS +/* JFFS Partition offset set */ +#define CONFIG_SYS_JFFS2_FIRST_BANK 0 +#define CONFIG_SYS_JFFS2_NUM_BANKS 1 +/* 512k reserved for u-boot */ +#define CONFIG_SYS_JFFS2_FIRST_SECTOR 0x40 +#endif + +/* Cache Configuration */ +#define CONFIG_SYS_CACHELINE_SIZE 16 + +#endif /* _CONFIG_ASTRO_MCF5373L_H */ -- cgit v1.3.1 From ac265f7fcab1a09b9a837a34ef8b10acc101695e Mon Sep 17 00:00:00 2001 From: TsiChung Liew Date: Wed, 10 Mar 2010 11:56:36 -0600 Subject: ColdFire: Update M5253DEMO configuration file Fix incorrect default environment for flash erase or protect range. Change offset from 0 to 0xff80nnnn. Remove default ethernet setup and MAC address. Signed-off-by: TsiChung Liew --- include/configs/M5253DEMO.h | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) (limited to 'include/configs') diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index 5e86e4cb90f..f813f8891b5 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -95,11 +95,6 @@ # define DM9000_DATA (CONFIG_DM9000_BASE + 4) # undef CONFIG_DM9000_DEBUG -# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 -# define CONFIG_IPADDR 10.82.121.249 -# define CONFIG_NETMASK 255.255.252.0 -# define CONFIG_SERVERIP 10.82.120.80 -# define CONFIG_GATEWAYIP 10.82.123.254 # define CONFIG_OVERWRITE_ETHADDR_ONCE # define CONFIG_EXTRA_ENV_SETTINGS \ @@ -109,8 +104,8 @@ "u-boot=u-boot.bin\0" \ "load=tftp ${loadaddr) ${u-boot}\0" \ "upd=run load; run prog\0" \ - "prog=prot off 0 2ffff;" \ - "era 0 2ffff;" \ + "prog=prot off 0xff800000 0xff82ffff;" \ + "era 0xff800000 0xff82ffff;" \ "cp.b ${loadaddr} 0 ${filesize};" \ "save\0" \ "" -- cgit v1.3.1 From 0e8a75550695aba9d8cfe9c7f7713da42c1f3e89 Mon Sep 17 00:00:00 2001 From: TsiChung Liew Date: Wed, 10 Mar 2010 16:33:03 -0600 Subject: ColdFire: Update Extra environment Data for M5275EVB Provide extra environment Data. Remove default network address and MAC address. Signed-off-by: TsiChung Liew --- include/configs/M5275EVB.h | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) (limited to 'include/configs') diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h index b3801598128..f8d43f0a5bb 100644 --- a/include/configs/M5275EVB.h +++ b/include/configs/M5275EVB.h @@ -121,11 +121,6 @@ #define CONFIG_SYS_I2C_PINMUX_CLR (0xFFF0) #define CONFIG_SYS_I2C_PINMUX_SET (0x000F) -#ifdef CONFIG_MCFFEC -#define CONFIG_ETHADDR 00:06:3b:01:41:55 -#define CONFIG_ETH1ADDR 00:0e:0c:bc:e5:60 -#endif - #define CONFIG_SYS_PROMPT "-> " #define CONFIG_SYS_LONGHELP /* undef to save memory */ @@ -145,6 +140,23 @@ #define CONFIG_SYS_MEMTEST_START 0x400 #define CONFIG_SYS_MEMTEST_END 0x380000 +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_RETRY_COUNT 5 +# define CONFIG_OVERWRITE_ETHADDR_ONCE +#endif /* FEC_ENET */ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "loadaddr=10000\0" \ + "uboot=u-boot.bin\0" \ + "load=tftp ${loadaddr} ${uboot}\0" \ + "upd=run load; run prog\0" \ + "prog=prot off ffe00000 ffe3ffff;" \ + "era ffe00000 ffe3ffff;" \ + "cp.b ${loadaddr} ffe00000 ${filesize};"\ + "save\0" \ + "" + #define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK 150000000 -- cgit v1.3.1 From 9e8e927023582231b034e199568e49f84ac032a9 Mon Sep 17 00:00:00 2001 From: TsiChung Liew Date: Wed, 10 Mar 2010 18:24:07 -0600 Subject: ColdFire: Misc update for M53017 Reside Ethernet buffer descriptors in SRAM instead of DRAM. Add CONFIG_SYS_TX_ETH_BUFFER in platform configuration file. Update DRAM control and SRAM control register setting. Update cache setting where size does not write to proper region. Signed-off-by: TsiChung Liew Signed-off-by: Jason Jin --- cpu/mcf532x/start.S | 2 +- include/configs/M53017EVB.h | 6 ++++-- 2 files changed, 5 insertions(+), 3 deletions(-) (limited to 'include/configs') diff --git a/cpu/mcf532x/start.S b/cpu/mcf532x/start.S index 5b134aa47c2..5abd944eb42 100644 --- a/cpu/mcf532x/start.S +++ b/cpu/mcf532x/start.S @@ -284,7 +284,7 @@ _int_handler: icache_enable: move.l #0x01000000, %d0 /* Invalidate cache cmd */ movec %d0, %CACR /* Invalidate cache */ - move.l #(CONFIG_SYS_SDRAM_BASE + 0xc000 + ((CONFIG_SYS_SDRAM_SIZE & 0x1fe0) << 11)), %d0 + move.l #(CONFIG_SYS_SDRAM_BASE + 0xc000 + ((CONFIG_SYS_SDRAM_SIZE & 0x1fe0 - 1) << 16)), %d0 movec %d0, %ACR0 /* Enable cache */ move.l #0x80000200, %d0 /* Setup cache mask */ diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h index 30855bdaa21..c351d415cf3 100644 --- a/include/configs/M53017EVB.h +++ b/include/configs/M53017EVB.h @@ -69,6 +69,8 @@ # define CONFIG_MII_INIT 1 # define CONFIG_SYS_DISCOVER_PHY # define CONFIG_SYS_RX_ETH_BUFFER 8 +# define CONFIG_SYS_TX_ETH_BUFFER 8 +# define CONFIG_SYS_FEC_BUF_USE_SRAM # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN # define CONFIG_HAS_ETH1 @@ -166,7 +168,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 #define CONFIG_SYS_INIT_RAM_END 0x20000 /* End of used area in internal SRAM */ -#define CONFIG_SYS_INIT_RAM_CTRL 0x21 +#define CONFIG_SYS_INIT_RAM_CTRL 0x221 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ #define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 0x10) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET @@ -180,7 +182,7 @@ #define CONFIG_SYS_SDRAM_SIZE 64 /* SDRAM size in MB */ #define CONFIG_SYS_SDRAM_CFG1 0x43711630 #define CONFIG_SYS_SDRAM_CFG2 0x56670000 -#define CONFIG_SYS_SDRAM_CTRL 0xE1002000 +#define CONFIG_SYS_SDRAM_CTRL 0xE1092000 #define CONFIG_SYS_SDRAM_EMOD 0x80010000 #define CONFIG_SYS_SDRAM_MODE 0x00CD0000 -- cgit v1.3.1 From f628e2f72daee810aa568619b6629da68ad042d6 Mon Sep 17 00:00:00 2001 From: TsiChung Liew Date: Wed, 10 Mar 2010 18:50:22 -0600 Subject: ColdFire: Fix SDRAM size on M5208evb rev E The proper SDRAM size is 32MB not 64MB Signed-off-by: Jingchang Lu --- include/configs/M5208EVBE.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/configs') diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h index 32123d2f547..3cc259ffd1c 100644 --- a/include/configs/M5208EVBE.h +++ b/include/configs/M5208EVBE.h @@ -158,7 +158,7 @@ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 */ #define CONFIG_SYS_SDRAM_BASE 0x40000000 -#define CONFIG_SYS_SDRAM_SIZE 64 /* SDRAM size in MB */ +#define CONFIG_SYS_SDRAM_SIZE 32 /* SDRAM size in MB */ #define CONFIG_SYS_SDRAM_CFG1 0x43711630 #define CONFIG_SYS_SDRAM_CFG2 0x56670000 #define CONFIG_SYS_SDRAM_CTRL 0xE1002000 -- cgit v1.3.1 From dd9f054ede433de73b137987fb3dc066e8d24ebb Mon Sep 17 00:00:00 2001 From: TsiChung Liew Date: Thu, 11 Mar 2010 22:12:53 -0600 Subject: ColdFire: Cache update for all platforms The CF will call cache functions in lib_m68/cache.c and the cache settings are defined in platform configuration file. Signed-off-by: TsiChung Liew --- cpu/mcf5227x/start.S | 100 ++----------------- cpu/mcf523x/start.S | 75 +------------- cpu/mcf52x2/start.S | 176 ++------------------------------ cpu/mcf532x/start.S | 72 +------------- cpu/mcf5445x/start.S | 123 ++--------------------- cpu/mcf547x_8x/start.S | 83 +--------------- include/asm-m68k/cache.h | 210 +++++++++++++++++++++++++++++++++++++++ include/configs/EB+MCF-EV123.h | 12 +++ include/configs/M5208EVBE.h | 13 +++ include/configs/M52277EVB.h | 13 +++ include/configs/M5235EVB.h | 12 +++ include/configs/M5249EVB.h | 15 +++ include/configs/M5253DEMO.h | 15 +++ include/configs/M5253EVBE.h | 15 +++ include/configs/M5271EVB.h | 14 +++ include/configs/M5272C3.h | 14 +++ include/configs/M5275EVB.h | 14 +++ include/configs/M5282EVB.h | 13 +++ include/configs/M53017EVB.h | 11 ++ include/configs/M5329EVB.h | 11 ++ include/configs/M5373EVB.h | 11 ++ include/configs/M54451EVB.h | 15 +++ include/configs/M54455EVB.h | 17 +++- include/configs/M5475EVB.h | 16 +++ include/configs/M5485EVB.h | 16 +++ include/configs/TASREG.h | 11 ++ include/configs/astro_mcf5373l.h | 11 ++ include/configs/cobra5272.h | 13 +++ include/configs/idmr.h | 13 +++ lib_m68k/cache.c | 123 ++++++++++++++++++++++- 30 files changed, 658 insertions(+), 599 deletions(-) create mode 100644 include/asm-m68k/cache.h (limited to 'include/configs') diff --git a/cpu/mcf5227x/start.S b/cpu/mcf5227x/start.S index 0c9c89c4021..30428f15d8e 100644 --- a/cpu/mcf5227x/start.S +++ b/cpu/mcf5227x/start.S @@ -24,16 +24,12 @@ #include #include #include "version.h" +#include #ifndef CONFIG_IDENT_STRING #define CONFIG_IDENT_STRING "" #endif -/* last three long word reserved for cache status */ -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END- 4) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END- 8) -#define CACR_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-12) - #define _START _start #define _FAULT _fault @@ -378,21 +374,19 @@ _start: movec %d0, %RAMBAR1 #endif + /* invalidate and disable cache */ + move.l #CF_CACR_CINV, %d0 /* Invalidate cache cmd */ + movec %d0, %CACR /* Invalidate cache */ + move.l #0, %d0 + movec %d0, %ACR0 + movec %d0, %ACR1 + /* initialize general use internal ram */ move.l #0, %d0 move.l #(ICACHE_STATUS), %a1 /* icache */ move.l #(DCACHE_STATUS), %a2 /* icache */ - move.l #(CACR_STATUS), %a3 /* CACR */ move.l %d0, (%a1) move.l %d0, (%a2) - move.l %d0, (%a3) - - /* invalidate and disable cache */ - move.l #0x01000000, %d0 /* Invalidate cache cmd */ - movec %d0, %CACR /* Invalidate cache */ - move.l #0, %d0 - movec %d0, %ACR0 - movec %d0, %ACR1 /* set stackpointer to end of internal ram to get some stackspace for the first c-code */ @@ -509,84 +503,6 @@ _int_handler: addql #4,%sp RESTORE_ALL -/*------------------------------------------------------------------------------*/ -/* cache functions */ - .globl icache_enable -icache_enable: - move.l #0x01200000, %d0 /* Invalid cache */ - movec %d0, %CACR - - move.l #(CONFIG_SYS_SDRAM_BASE + 0x1c000), %d0 - movec %d0, %ACR0 - - move.l #0x81600610, %d0 /* Enable cache */ - movec %d0, %CACR - - move.l #(ICACHE_STATUS), %a1 - moveq #1, %d0 - move.l %d0, (%a1) - rts - - .globl icache_disable -icache_disable: - move.l #0x01F00000, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Invalidate icache */ - clr.l %d0 - movec %d0, %ACR0 - movec %d0, %ACR1 - - move.l #(ICACHE_STATUS), %a1 - moveq #0, %d0 - move.l %d0, (%a1) - rts - - .globl icache_status -icache_status: - move.l #(ICACHE_STATUS), %a1 - move.l (%a1), %d0 - rts - - .globl icache_invalid -icache_invalid: - move.l #0x80600610, %d0 /* Invalidate icache */ - movec %d0, %CACR /* Enable and invalidate cache */ - rts - - .globl dcache_enable -dcache_enable: - move.l #0x01200000, %d0 /* Invalid cache */ - movec %d0, %CACR - - move.l #0x81300610, %d0 - movec %d0, %CACR - - move.l #(DCACHE_STATUS), %a1 - moveq #1, %d0 - move.l %d0, (%a1) - rts - - .globl dcache_disable -dcache_disable: - move.l #0x81600610, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Invalidate icache */ - - move.l #(DCACHE_STATUS), %a1 - moveq #0, %d0 - move.l %d0, (%a1) - rts - - .globl dcache_invalid -dcache_invalid: - move.l #0x81100610, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable and invalidate cache */ - rts - - .globl dcache_status -dcache_status: - move.l #(DCACHE_STATUS), %a1 - move.l (%a1), %d0 - rts - /*------------------------------------------------------------------------------*/ .globl version_string diff --git a/cpu/mcf523x/start.S b/cpu/mcf523x/start.S index d44da37ec72..20b50e7579e 100644 --- a/cpu/mcf523x/start.S +++ b/cpu/mcf523x/start.S @@ -24,6 +24,7 @@ #include #include #include "version.h" +#include #ifndef CONFIG_IDENT_STRING #define CONFIG_IDENT_STRING "" @@ -135,7 +136,7 @@ _start: movec %d0, %RAMBAR1 /* invalidate and disable cache */ - move.l #0x01000000, %d0 /* Invalidate cache cmd */ + move.l #CF_CACR_CINV, %d0 /* Invalidate cache cmd */ movec %d0, %CACR /* Invalidate cache */ nop move.l #0, %d0 @@ -144,8 +145,8 @@ _start: /* initialize general use internal ram */ move.l #0, %d0 - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1 - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a2 + move.l #(ICACHE_STATUS), %a1 /* icache */ + move.l #(DCACHE_STATUS), %a2 /* icache */ move.l %d0, (%a1) move.l %d0, (%a2) @@ -264,74 +265,6 @@ _int_handler: addql #4,%sp RESTORE_ALL -/*------------------------------------------------------------------------------*/ -/* cache functions */ - .globl icache_enable -icache_enable: - move.l #0x01000000, %d0 /* Invalidate cache cmd */ - movec %d0, %CACR /* Invalidate cache */ - nop - move.l #(CONFIG_SYS_SDRAM_BASE + 0xc000), %d0 /* Setup cache mask */ - movec %d0, %ACR0 /* Enable cache */ - move.l #(CONFIG_SYS_FLASH_BASE + 0xc000), %d0 /* Setup cache mask */ - movec %d0, %ACR1 /* Enable cache */ - - move.l #0x80400100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ - nop - - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1 - moveq #1, %d0 - move.l %d0, (%a1) - rts - - .globl icache_disable -icache_disable: - move.l #0x00000100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Disable cache */ - clr.l %d0 /* Setup cache mask */ - movec %d0, %ACR0 - movec %d0, %ACR1 - - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1 - moveq #0, %d0 - move.l %d0, (%a1) - rts - - .globl icache_status -icache_status: - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1 - move.l (%a1), %d0 - rts - - .globl icache_invalid -icache_invalid: - move.l #0x80600100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ - nop - rts - - .globl dcache_enable -dcache_enable: - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a1 - moveq #1, %d0 - move.l %d0, (%a1) - rts - - /* No dcache, just a dummy function */ - .globl dcache_disable -dcache_disable: - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a1 - moveq #0, %d0 - move.l %d0, (%a1) - rts - - .globl dcache_status -dcache_status: - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a1 - move.l (%a1), %d0 - rts - /*------------------------------------------------------------------------------*/ .globl version_string diff --git a/cpu/mcf52x2/start.S b/cpu/mcf52x2/start.S index 0dd4de5160c..9ef206aa0fd 100644 --- a/cpu/mcf52x2/start.S +++ b/cpu/mcf52x2/start.S @@ -24,12 +24,12 @@ #include #include #include "version.h" +#include #ifndef CONFIG_IDENT_STRING #define CONFIG_IDENT_STRING "" #endif - #define _START _start #define _FAULT _fault @@ -201,6 +201,13 @@ _after_flashbar_copy: movec %d0, %RAMBAR1 #endif + /* initialize general use internal ram */ + move.l #0, %d0 + move.l #(ICACHE_STATUS), %a1 /* icache */ + move.l #(DCACHE_STATUS), %a2 /* icache */ + move.l %d0, (%a1) + move.l %d0, (%a2) + /* set stackpointer to end of internal ram to get some stackspace for the first c-code */ move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp clr.l %sp@- @@ -283,23 +290,6 @@ clear_bss: cmp.l %a2, %a1 bne 7b -#if defined(CONFIG_M5281) || defined(CONFIG_M5282) - /* patch the 3 accesspoints to 3 ichache_state */ - /* quick and dirty */ - - move.l %a0,%d1 - add.l #(icache_state - CONFIG_SYS_MONITOR_BASE),%d1 - move.l %a0,%a1 - add.l #(icache_state_access_1+2 - CONFIG_SYS_MONITOR_BASE),%a1 - move.l %d1,(%a1) - move.l %a0,%a1 - add.l #(icache_state_access_2+2 - CONFIG_SYS_MONITOR_BASE),%a1 - move.l %d1,(%a1) - move.l %a0,%a1 - add.l #(icache_state_access_3+2 - CONFIG_SYS_MONITOR_BASE),%a1 - move.l %d1,(%a1) -#endif - /* calculate relative jump to board_init_r in ram */ move.l %a0, %a1 add.l #(board_init_r - CONFIG_SYS_MONITOR_BASE), %a1 @@ -335,156 +325,6 @@ _int_handler: addql #4,%sp RESTORE_ALL -/*------------------------------------------------------------------------------*/ -/* cache functions */ -#ifdef CONFIG_M5208 - .globl icache_enable -icache_enable: - move.l #0x01000000, %d0 /* Invalidate cache cmd */ - movec %d0, %CACR /* Invalidate cache */ - move.l #(CONFIG_SYS_SDRAM_BASE + 0xC000), %d0 /* Setup cache mask */ - movec %d0, %ACR0 /* Enable cache */ - - move.l #0x80000200, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ - nop - - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1 - moveq #1, %d0 - move.l %d0, (%a1) - rts -#endif - -#ifdef CONFIG_M5271 - .globl icache_enable -icache_enable: - move.l #0x01000000, %d0 /* Invalidate cache cmd */ - movec %d0, %CACR /* Invalidate cache */ - move.l #(CONFIG_SYS_SDRAM_BASE + 0xc000), %d0 /* Setup cache mask */ - movec %d0, %ACR0 /* Enable cache */ - - move.l #0x80000200, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ - nop - - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1 - moveq #1, %d0 - move.l %d0, (%a1) - rts -#endif - -#ifdef CONFIG_M5272 - .globl icache_enable -icache_enable: - move.l #0x01000000, %d0 /* Invalidate cache cmd */ - movec %d0, %CACR /* Invalidate cache */ - move.l #0x0000c000, %d0 /* Setup cache mask */ - movec %d0, %ACR0 /* Enable cache */ - move.l #0xff00c000, %d0 /* Setup cache mask */ - movec %d0, %ACR1 /* Enable cache */ - move.l #0x80000100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ - moveq #1, %d0 - move.l %d0, icache_state - rts -#endif - -#if defined(CONFIG_M5275) -/* - * Instruction cache only - */ - .globl icache_enable -icache_enable: - move.l #0x01400000, %d0 /* Invalidate cache cmd */ - movec %d0, %CACR /* Invalidate cache */ - move.l #0x0000c000, %d0 /* Setup SDRAM caching */ - movec %d0, %ACR0 /* Enable cache */ - move.l #0x00000000, %d0 /* No other caching */ - movec %d0, %ACR1 /* Enable cache */ - move.l #0x80400100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ - moveq #1, %d0 - move.l %d0, icache_state - rts -#endif - -#ifdef CONFIG_M5282 - .globl icache_enable -icache_enable: - move.l #0x01000000, %d0 /* Invalidate cache cmd */ - movec %d0, %CACR /* Invalidate cache */ - move.l #0x0000c000, %d0 /* Setup cache mask */ - movec %d0, %ACR0 /* Enable cache */ - move.l #0xff00c000, %d0 /* Setup cache mask */ - movec %d0, %ACR1 /* Enable cache */ - move.l #0x80400100, %d0 /* Setup cache mask, data cache disabel*/ - movec %d0, %CACR /* Enable cache */ - moveq #1, %d0 -icache_state_access_1: - move.l %d0, icache_state - rts -#endif - -#if defined(CONFIG_M5249) || defined(CONFIG_M5253) - .globl icache_enable -icache_enable: - /* - * Note: The 5249 Documentation doesn't give a bit position for CINV! - * From the 5272 and the 5307 documentation, I have deduced that it is - * probably CACR[24]. Should someone say something to Motorola? - * ~Jeremy - */ - move.l #0x01000000, %d0 /* Invalidate whole cache */ - move.c %d0,%CACR - move.l #0xff00c000, %d0 /* Set FLASH cachable: always match (SM=0b10) */ - move.c %d0, %ACR0 - move.l #0x0000c000, %d0 /* Set SDRAM cachable: always match (SM=0b10) */ - move.c %d0, %ACR1 - move.l #0x90000200, %d0 /* Set cache enable cmd */ - move.c %d0,%CACR - moveq #1, %d0 - move.l %d0, icache_state - rts -#endif - - .globl icache_disable -icache_disable: - move.l #0x00000100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ - clr.l %d0 /* Setup cache mask */ - movec %d0, %ACR0 /* Enable cache */ - movec %d0, %ACR1 /* Enable cache */ - moveq #0, %d0 -icache_state_access_2: - move.l %d0, icache_state - rts - - .globl icache_status -icache_status: -icache_state_access_3: - move.l #(icache_state), %a0 - move.l (%a0), %d0 - rts - - .data -icache_state: - .long 0 /* cache is diabled on inirialization */ - - .globl dcache_enable -dcache_enable: - /* dummy function */ - rts - - .globl dcache_disable -dcache_disable: - /* dummy function */ - rts - - .globl dcache_status -dcache_status: - /* dummy function */ - rts - /*------------------------------------------------------------------------------*/ .globl version_string diff --git a/cpu/mcf532x/start.S b/cpu/mcf532x/start.S index 5abd944eb42..a80b0a99464 100644 --- a/cpu/mcf532x/start.S +++ b/cpu/mcf532x/start.S @@ -27,6 +27,7 @@ #include #include #include "version.h" +#include #ifndef CONFIG_IDENT_STRING #define CONFIG_IDENT_STRING "" @@ -142,7 +143,7 @@ _start: movec %d0, %RAMBAR1 /* invalidate and disable cache */ - move.l #0x01000000, %d0 /* Invalidate cache cmd */ + move.l #CF_CACR_CINVA, %d0 /* Invalidate cache cmd */ movec %d0, %CACR /* Invalidate cache */ move.l #0, %d0 movec %d0, %ACR0 @@ -158,8 +159,8 @@ _start: /* initialize general use internal ram */ move.l #0, %d0 - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1 - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a2 + move.l #(ICACHE_STATUS), %a1 /* icache */ + move.l #(DCACHE_STATUS), %a2 /* icache */ move.l %d0, (%a1) move.l %d0, (%a2) @@ -279,71 +280,6 @@ _int_handler: RESTORE_ALL /*------------------------------------------------------------------------------*/ -/* cache functions */ - .globl icache_enable -icache_enable: - move.l #0x01000000, %d0 /* Invalidate cache cmd */ - movec %d0, %CACR /* Invalidate cache */ - move.l #(CONFIG_SYS_SDRAM_BASE + 0xc000 + ((CONFIG_SYS_SDRAM_SIZE & 0x1fe0 - 1) << 16)), %d0 - movec %d0, %ACR0 /* Enable cache */ - - move.l #0x80000200, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ - nop - - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1 - moveq #1, %d0 - move.l %d0, (%a1) - rts - - .globl icache_disable -icache_disable: - move.l #0x01000000, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Disable cache */ - clr.l %d0 /* Setup cache mask */ - movec %d0, %ACR0 - movec %d0, %ACR1 - - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1 - moveq #0, %d0 - move.l %d0, (%a1) - rts - - .globl icache_status -icache_status: - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1 - move.l (%a1), %d0 - rts - - .globl icache_invalid -icache_invalid: - move.l #0x81000200, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ - rts - - .globl dcache_enable -dcache_enable: - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a1 - moveq #1, %d0 - move.l %d0, (%a1) - rts - - /* No dcache, just a dummy function */ - .globl dcache_disable -dcache_disable: - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a1 - moveq #0, %d0 - move.l %d0, (%a1) - rts - - .globl dcache_status -dcache_status: - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a1 - move.l (%a1), %d0 - rts - -/*------------------------------------------------------------------------------*/ - .globl version_string version_string: .ascii U_BOOT_VERSION diff --git a/cpu/mcf5445x/start.S b/cpu/mcf5445x/start.S index d2d44391513..738e4a71101 100644 --- a/cpu/mcf5445x/start.S +++ b/cpu/mcf5445x/start.S @@ -24,16 +24,12 @@ #include #include #include "version.h" +#include #ifndef CONFIG_IDENT_STRING #define CONFIG_IDENT_STRING "" #endif -/* last three long word reserved for cache status */ -#define CACR_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-12) -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END- 8) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END- 4) - #define _START _start #define _FAULT _fault @@ -160,15 +156,13 @@ asm_dram_init: /* initialize general use internal ram */ move.l #0, %d0 - move.l #(CACR_STATUS), %a1 /* CACR */ - move.l #(ICACHE_STATUS), %a2 /* icache */ - move.l #(DCACHE_STATUS), %a3 /* dcache */ + move.l #(ICACHE_STATUS), %a1 /* icache */ + move.l #(DCACHE_STATUS), %a2 /* dcache */ move.l %d0, (%a1) move.l %d0, (%a2) - move.l %d0, (%a3) /* invalidate and disable cache */ - move.l #0x01004100, %d0 /* Invalidate cache cmd */ + move.l #(CONFIG_SYS_ICACHE_INV + CONFIG_SYS_DCACHE_INV), %d0 movec %d0, %CACR /* Invalidate cache */ move.l #0, %d0 movec %d0, %ACR0 @@ -411,15 +405,13 @@ _start: /* initialize general use internal ram */ move.l #0, %d0 - move.l #(CACR_STATUS), %a1 /* CACR */ - move.l #(ICACHE_STATUS), %a2 /* icache */ - move.l #(DCACHE_STATUS), %a3 /* dcache */ + move.l #(ICACHE_STATUS), %a1 /* icache */ + move.l #(DCACHE_STATUS), %a2 /* dcache */ move.l %d0, (%a1) move.l %d0, (%a2) - move.l %d0, (%a3) /* invalidate and disable cache */ - move.l #0x01004100, %d0 /* Invalidate cache cmd */ + move.l #(CONFIG_SYS_ICACHE_INV + CONFIG_SYS_DCACHE_INV), %d0 movec %d0, %CACR /* Invalidate cache */ move.l #0, %d0 movec %d0, %ACR0 @@ -543,107 +535,6 @@ _int_handler: addql #4,%sp RESTORE_ALL -/*------------------------------------------------------------------------------*/ -/* cache functions */ - .globl icache_enable -icache_enable: - move.l #(CACR_STATUS), %a1 /* read CACR Status */ - move.l (%a1), %d1 - - move.l #0x00040100, %d0 /* Invalidate icache */ - movec %d0, %CACR - - move.l #(CONFIG_SYS_SDRAM_BASE + 0xC000), %d0 /* Setup icache */ - movec %d0, %ACR2 - - move.l #0x04088020, %d0 /* Enable bcache and icache */ - movec %d0, %CACR - - move.l #(ICACHE_STATUS), %a1 - moveq #1, %d0 - move.l %d0, (%a1) - rts - - .globl icache_disable -icache_disable: - move.l #(CACR_STATUS), %a1 /* read CACR Status */ - move.l (%a1), %d0 - - move.l #0xFFF77BFF, %d0 - or.l #0x00040100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Invalidate icache */ - clr.l %d0 - movec %d0, %ACR2 - movec %d0, %ACR3 - - move.l #(ICACHE_STATUS), %a1 - moveq #0, %d0 - move.l %d0, (%a1) - rts - - .globl icache_status -icache_status: - move.l #(ICACHE_STATUS), %a1 - move.l (%a1), %d0 - rts - - .globl icache_invalid -icache_invalid: - move.l #(CACR_STATUS), %a1 /* read CACR Status */ - move.l (%a1), %d0 - - move.l #0x00040100, %d0 /* Invalidate icache */ - movec %d0, %CACR /* Enable and invalidate cache */ - rts - - .globl dcache_enable -dcache_enable: - move.l #(CACR_STATUS), %a1 /* read CACR Status */ - move.l (%a1), %d1 - - move.l #0x01040100, %d0 - movec %d0, %CACR /* Invalidate dcache */ - - move.l #0x80088020, %d0 /* Enable bcache and icache */ - movec %d0, %CACR - - move.l #(DCACHE_STATUS), %a1 - moveq #1, %d0 - move.l %d0, (%a1) - rts - - .globl dcache_disable -dcache_disable: - move.l #(CACR_STATUS), %a1 /* read CACR Status */ - move.l (%a1), %d0 - - and.l #0x7FFFFFFF, %d0 - or.l #0x01000000, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Disable dcache */ - clr.l %d0 - movec %d0, %ACR0 - movec %d0, %ACR1 - - move.l #(DCACHE_STATUS), %a1 - moveq #0, %d0 - move.l %d0, (%a1) - rts - - .globl dcache_invalid -dcache_invalid: - move.l #(CACR_STATUS), %a1 /* read CACR Status */ - move.l (%a1), %d0 - - move.l #0x81088020, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable and invalidate cache */ - rts - - .globl dcache_status -dcache_status: - move.l #(DCACHE_STATUS), %a1 - move.l (%a1), %d0 - rts - /*------------------------------------------------------------------------------*/ .globl version_string diff --git a/cpu/mcf547x_8x/start.S b/cpu/mcf547x_8x/start.S index 94ef14bf3d2..84118629e27 100644 --- a/cpu/mcf547x_8x/start.S +++ b/cpu/mcf547x_8x/start.S @@ -24,16 +24,12 @@ #include #include #include "version.h" +#include #ifndef CONFIG_IDENT_STRING #define CONFIG_IDENT_STRING "" #endif -/* last three long word reserved for cache status */ -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END- 4) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END- 8) -#define CACR_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-12) - #define _START _start #define _FAULT _fault @@ -158,10 +154,8 @@ _start: move.l #0, %d0 move.l #(ICACHE_STATUS), %a1 /* icache */ move.l #(DCACHE_STATUS), %a2 /* icache */ - move.l #(CACR_STATUS), %a3 /* CACR */ move.l %d0, (%a1) move.l %d0, (%a2) - move.l %d0, (%a3) /* set stackpointer to end of internal ram to get some stackspace for the first c-code */ @@ -278,81 +272,6 @@ _int_handler: addql #4,%sp RESTORE_ALL -/*------------------------------------------------------------------------------*/ -/* cache functions */ - .globl icache_enable -icache_enable: - move.l #(CONFIG_SYS_SDRAM_BASE + 0x1c000), %d0 - movec %d0, %ACR2 /* Enable cache */ - - move.l #0x020C8100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ - nop - - move.l #(ICACHE_STATUS), %a1 - moveq #1, %d0 - move.l %d0, (%a1) - rts - - .globl icache_disable -icache_disable: - move.l #0x000C8100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Disable cache */ - clr.l %d0 /* Setup cache mask */ - movec %d0, %ACR2 - movec %d0, %ACR3 - - move.l #(ICACHE_STATUS), %a1 - moveq #0, %d0 - move.l %d0, (%a1) - rts - - .globl icache_invalid -icache_invalid: - move.l #0x000C8100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ - rts - - .globl icache_status -icache_status: - move.l #(ICACHE_STATUS), %a1 - move.l (%a1), %d0 - rts - - .globl dcache_enable -dcache_enable: - bsr icache_disable - - move.l #(CONFIG_SYS_SDRAM_BASE + 0xc000), %d0 - movec %d0, %ACR0 /* Enable cache */ - - move.l #0xA30C8100, %d0 /* Invalidate cache cmd */ - movec %d0, %CACR /* Invalidate cache */ - - move.l #(DCACHE_STATUS), %a1 - moveq #1, %d0 - move.l %d0, (%a1) - rts - - .globl dcache_disable -dcache_disable: - move.l #0xA30C8100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Disable cache */ - clr.l %d0 /* Setup cache mask */ - movec %d0, %ACR0 - movec %d0, %ACR1 - - move.l #(DCACHE_STATUS), %a1 - moveq #0, %d0 - move.l %d0, (%a1) - rts - - .globl dcache_status -dcache_status: - move.l #(DCACHE_STATUS), %a1 - move.l (%a1), %d0 - rts - /*------------------------------------------------------------------------------*/ .globl version_string diff --git a/include/asm-m68k/cache.h b/include/asm-m68k/cache.h new file mode 100644 index 00000000000..7c84e484711 --- /dev/null +++ b/include/asm-m68k/cache.h @@ -0,0 +1,210 @@ +/* + * ColdFire cache + * + * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CACHE_H +#define __CACHE_H + +#if defined(CONFIG_MCF520x) || defined(CONFIG_MCF523x) || \ + defined(CONFIG_MCF52x2) || defined(CONFIG_MCF5227x) +#define CONFIG_CF_V2 +#endif + +#if defined(CONFIG_MCF532x) || defined(CONFIG_MCF5301x) +#define CONFIG_CF_V3 +#endif + +#if defined(CONFIG_MCF547x_8x) || defined(CONFIG_MCF5445x) +#define CONFIG_CF_V4 +#if defined(CONFIG_MCF5441x) +#define CONFIG_CF_V4E /* Four Extra ACRn */ +#endif +#endif + +/* ***** CACR ***** */ +/* V2 Core */ +#ifdef CONFIG_CF_V2 + +#define CF_CACR_CENB (1 << 31) +#define CF_CACR_CPD (1 << 28) +#define CF_CACR_CFRZ (1 << 27) +#define CF_CACR_CEIB (1 << 10) +#define CF_CACR_DCM (1 << 9) +#define CF_CACR_DBWE (1 << 8) + +#if defined(CONFIG_MCF5249) || defined(CONFIG_MCF5253) +#define CF_CACR_DWP (1 << 6) +#else +#define CF_CACR_CINV (1 << 24) +#define CF_CACR_DISI (1 << 23) +#define CF_CACR_DISD (1 << 22) +#define CF_CACR_INVI (1 << 21) +#define CF_CACR_INVD (1 << 20) +#define CF_CACR_DWP (1 << 5) +#define CF_CACR_EUSP (1 << 4) +#endif /* CONFIG_MCF5249 || CONFIG_MCF5253 */ + +#endif /* CONFIG_CF_V2 */ + +/* V3 Core */ +#ifdef CONFIG_CF_V3 + +#define CF_CACR_EC (1 << 31) +#define CF_CACR_ESB (1 << 29) +#define CF_CACR_DPI (1 << 28) +#define CF_CACR_HLCK (1 << 27) +#define CF_CACR_CINVA (1 << 24) +#define CF_CACR_DNFB (1 << 10) +#define CF_CACR_DCM_UNMASK 0xFFFFFCFF +#define CF_CACR_DCM_WT (0 << 8) +#define CF_CACR_DCM_CB (1 << 8) +#define CF_CACR_DCM_P (2 << 8) +#define CF_CACR_DCM_IP (3 << 8) +#define CF_CACR_DW (1 << 5) +#define CF_CACR_EUSP (1 << 4) + +#endif /* CONFIG_CF_V3 */ + +/* V4 Core */ +#ifdef CONFIG_CF_V4 + +#define CF_CACR_DEC (1 << 31) +#define CF_CACR_DW (1 << 30) +#define CF_CACR_DESB (1 << 29) +#define CF_CACR_DDPI (1 << 28) +#define CF_CACR_DHLCK (1 << 27) +#define CF_CACR_DDCM_UNMASK (0xF9FFFFFF) +#define CF_CACR_DDCM_WT (0 << 25) +#define CF_CACR_DDCM_CB (1 << 25) +#define CF_CACR_DDCM_P (2 << 25) +#define CF_CACR_DDCM_IP (3 << 25) +#define CF_CACR_DCINVA (1 << 24) + +#define CF_CACR_DDSP (1 << 23) +#define CF_CACR_BEC (1 << 19) +#define CF_CACR_BCINVA (1 << 18) +#define CF_CACR_IEC (1 << 15) +#define CF_CACR_DNFB (1 << 13) +#define CF_CACR_IDPI (1 << 12) +#define CF_CACR_IHLCK (1 << 11) +#define CF_CACR_IDCM (1 << 10) +#define CF_CACR_ICINVA (1 << 8) +#define CF_CACR_IDSP (1 << 7) +#define CF_CACR_EUSP (1 << 5) + +#ifdef CONFIG_MCF5445x +#define CF_CACR_IVO (1 << 20) +#define CF_CACR_SPA (1 << 14) +#else +#define CF_CACR_DF (1 << 4) +#endif + +#endif /* CONFIG_CF_V4 */ + +/* ***** ACR ***** */ +#define CF_ACR_ADR_UNMASK (0x00FFFFFF) +#define CF_ACR_ADR(x) ((x & 0xFF) << 24) +#define CF_ACR_ADRMSK_UNMASK (0xFF00FFFF) +#define CF_ACR_ADRMSK(x) ((x & 0xFF) << 16) +#define CF_ACR_EN (1 << 15) +#define CF_ACR_SM_UNMASK (0xFFFF9FFF) +#define CF_ACR_SM_UM (0 << 13) +#define CF_ACR_SM_SM (1 << 13) +#define CF_ACR_SM_ALL (3 << 13) +#define CF_ACR_WP (1 << 2) + +/* V2 Core */ +#ifdef CONFIG_CF_V2 +#define CF_ACR_CM (1 << 6) +#define CF_ACR_BWE (1 << 5) +#else +/* V3 & V4 */ +#define CF_ACR_CM_UNMASK (0xFFFFFF9F) +#define CF_ACR_CM_WT (0 << 5) +#define CF_ACR_CM_CB (1 << 5) +#define CF_ACR_CM_P (2 << 5) +#define CF_ACR_CM_IP (3 << 5) +#endif /* CONFIG_CF_V2 */ + +/* V4 Core */ +#ifdef CONFIG_CF_V4 +#define CF_ACR_AMM (1 << 10) +#define CF_ACR_SP (1 << 3) +#endif /* CONFIG_CF_V4 */ + + +#ifndef CONFIG_SYS_CACHE_ICACR +#define CONFIG_SYS_CACHE_ICACR 0 +#endif + +#ifndef CONFIG_SYS_CACHE_DCACR +#ifdef CONFIG_SYS_CACHE_ICACR +#define CONFIG_SYS_CACHE_DCACR CONFIG_SYS_CACHE_ICACR +#else +#define CONFIG_SYS_CACHE_DCACR 0 +#endif +#endif + +#ifndef CONFIG_SYS_CACHE_ACR0 +#define CONFIG_SYS_CACHE_ACR0 0 +#endif + +#ifndef CONFIG_SYS_CACHE_ACR1 +#define CONFIG_SYS_CACHE_ACR1 0 +#endif + +#ifndef CONFIG_SYS_CACHE_ACR2 +#define CONFIG_SYS_CACHE_ACR2 0 +#endif + +#ifndef CONFIG_SYS_CACHE_ACR3 +#define CONFIG_SYS_CACHE_ACR3 0 +#endif + +#ifndef CONFIG_SYS_CACHE_ACR4 +#define CONFIG_SYS_CACHE_ACR4 0 +#endif + +#ifndef CONFIG_SYS_CACHE_ACR5 +#define CONFIG_SYS_CACHE_ACR5 0 +#endif + +#ifndef CONFIG_SYS_CACHE_ACR6 +#define CONFIG_SYS_CACHE_ACR6 0 +#endif + +#ifndef CONFIG_SYS_CACHE_ACR7 +#define CONFIG_SYS_CACHE_ACR7 0 +#endif + +#define CF_ADDRMASK(x) (((x > 0x10) ? ((x >> 4) - 1) : (x)) << 16) + +#ifndef __ASSEMBLY__ /* put C only stuff in this section */ + +void icache_invalid(void); +void dcache_invalid(void); + +#endif + +#endif /* __CACHE_H */ diff --git a/include/configs/EB+MCF-EV123.h b/include/configs/EB+MCF-EV123.h index a0b27a89c42..880cb4ee6b9 100644 --- a/include/configs/EB+MCF-EV123.h +++ b/include/configs/EB+MCF-EV123.h @@ -208,6 +208,18 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV + CF_CACR_DCM) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_DISD | \ + CF_CACR_CEIB | CF_CACR_DBWE | \ + CF_CACR_EUSP) + /*----------------------------------------------------------------------- * Memory bank definitions */ diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h index 3cc259ffd1c..e6632acbe79 100644 --- a/include/configs/M5208EVBE.h +++ b/include/configs/M5208EVBE.h @@ -207,6 +207,19 @@ /* Cache Configuration */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ + CF_CACR_DISD | CF_CACR_INVI | \ + CF_CACR_CEIB | CF_CACR_DCM | \ + CF_CACR_EUSP) + /* Chipselect bank definitions */ /* * CS0 - NOR Flash diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h index 1801d9d7d58..6c6b5d6d571 100644 --- a/include/configs/M52277EVB.h +++ b/include/configs/M52277EVB.h @@ -302,6 +302,19 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ + CF_CACR_DISD | CF_CACR_INVI | \ + CF_CACR_CEIB | CF_CACR_DCM | \ + CF_CACR_EUSP) + /*----------------------------------------------------------------------- * Memory bank definitions */ diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h index 2b816ceae2b..5c0dc842aad 100644 --- a/include/configs/M5235EVB.h +++ b/include/configs/M5235EVB.h @@ -237,6 +237,18 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_DISD | \ + CF_CACR_CEIB | CF_CACR_DCM | \ + CF_CACR_EUSP) + /*----------------------------------------------------------------------- * Chipselect bank definitions */ diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h index e3830e53693..33ac2859dfb 100644 --- a/include/configs/M5249EVB.h +++ b/include/configs/M5249EVB.h @@ -60,6 +60,7 @@ * Command line configuration. */ #include +#define CONFIG_CMD_CACHE #undef CONFIG_CMD_NET #define CONFIG_SYS_PROMPT "=> " @@ -165,6 +166,20 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_DCM) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_FLASH_BASE | \ + CF_ADDRMASK(2) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ACR1 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CEIB | \ + CF_CACR_DBWE) + /*----------------------------------------------------------------------- * Memory bank definitions */ diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index f813f8891b5..9944e12fe4e 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -57,6 +57,7 @@ */ #include +#define CONFIG_CMD_CACHE #define CONFIG_CMD_LOADB #define CONFIG_CMD_LOADS #define CONFIG_CMD_EXT2 @@ -226,6 +227,20 @@ /* Cache Configuration */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_DCM) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_FLASH_BASE | \ + CF_ADDRMASK(8) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ACR1 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CEIB | \ + CF_CACR_DBWE) + /* Port configuration */ #define CONFIG_SYS_FECI2C 0xF0 diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h index df6970cdfac..206d1152ee4 100644 --- a/include/configs/M5253EVBE.h +++ b/include/configs/M5253EVBE.h @@ -64,6 +64,7 @@ * Command line configuration. */ #include +#define CONFIG_CMD_CACHE #undef CONFIG_CMD_NET #define CONFIG_CMD_LOADB #define CONFIG_CMD_LOADS @@ -179,6 +180,20 @@ /* Cache Configuration */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_DCM) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_FLASH_BASE | \ + CF_ADDRMASK(2) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ACR1 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CEIB | \ + CF_CACR_DBWE) + /* Port configuration */ #define CONFIG_SYS_FECI2C 0xF0 diff --git a/include/configs/M5271EVB.h b/include/configs/M5271EVB.h index 50b3ab28084..798949cc560 100644 --- a/include/configs/M5271EVB.h +++ b/include/configs/M5271EVB.h @@ -72,6 +72,7 @@ */ #include +#define CONFIG_CMD_CACHE #define CONFIG_CMD_PING #define CONFIG_CMD_NET #define CONFIG_CMD_MII @@ -229,6 +230,19 @@ /* Cache Configuration */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ + CF_CACR_DISD | CF_CACR_INVI | \ + CF_CACR_CEIB | CF_CACR_DCM | \ + CF_CACR_EUSP) + /* Chip Select 0 : Boot Flash */ #define CONFIG_SYS_CS0_BASE 0xFFE00000 #define CONFIG_SYS_CS0_MASK 0x001F0001 diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index f824158a697..f704bb3ff7c 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -74,6 +74,7 @@ */ #include +#define CONFIG_CMD_CACHE #define CONFIG_CMD_MII #define CONFIG_CMD_NET #define CONFIG_CMD_PING @@ -211,6 +212,19 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ + CF_CACR_DISD | CF_CACR_INVI | \ + CF_CACR_CEIB | CF_CACR_DCM | \ + CF_CACR_EUSP) + /*----------------------------------------------------------------------- * Memory bank definitions */ diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h index f8d43f0a5bb..981670ac069 100644 --- a/include/configs/M5275EVB.h +++ b/include/configs/M5275EVB.h @@ -72,6 +72,7 @@ /* Available command configuration */ #include +#define CONFIG_CMD_CACHE #define CONFIG_CMD_PING #define CONFIG_CMD_MII #define CONFIG_CMD_NET @@ -220,6 +221,19 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ + CF_CACR_DISD | CF_CACR_INVI | \ + CF_CACR_CEIB | CF_CACR_DCM | \ + CF_CACR_EUSP) + /*----------------------------------------------------------------------- * Memory bank definitions */ diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index 15590cfcd5d..6e0aa14d3a0 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -64,6 +64,7 @@ * Command line configuration. */ #include +#define CONFIG_CMD_CACHE #define CONFIG_CMD_NET #define CONFIG_CMD_PING #define CONFIG_CMD_MII @@ -209,6 +210,18 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV + CF_CACR_DCM) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_DISD | \ + CF_CACR_CEIB | CF_CACR_DBWE | \ + CF_CACR_EUSP) + /*----------------------------------------------------------------------- * Memory bank definitions */ diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h index c351d415cf3..d983a8fedb7 100644 --- a/include/configs/M53017EVB.h +++ b/include/configs/M53017EVB.h @@ -233,6 +233,17 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINVA) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_EC | CF_CACR_CINVA | \ + CF_CACR_DCM_P) + /*----------------------------------------------------------------------- * Chipselect bank definitions */ diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index 8180c05e67f..159b178f401 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -237,6 +237,17 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINVA) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_EC | CF_CACR_CINVA | \ + CF_CACR_DCM_P) + /*----------------------------------------------------------------------- * Chipselect bank definitions */ diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h index 8652a80aa11..af1988ce0a4 100644 --- a/include/configs/M5373EVB.h +++ b/include/configs/M5373EVB.h @@ -237,6 +237,17 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINVA) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_EC | CF_CACR_CINVA | \ + CF_CACR_DCM_P) + /*----------------------------------------------------------------------- * Chipselect bank definitions */ diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h index a5acfd28460..a80d33047f8 100644 --- a/include/configs/M54451EVB.h +++ b/include/configs/M54451EVB.h @@ -309,6 +309,21 @@ /* Cache Configuration */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA) +#define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA) +#define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_IEC | \ + CF_CACR_ICINVA | CF_CACR_EUSP) +#define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \ + CF_CACR_DEC | CF_CACR_DDCM_P | \ + CF_CACR_DCINVA) & ~CF_CACR_ICINVA) + /*----------------------------------------------------------------------- * Memory bank definitions */ diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index 7737284aab6..5b4bba8c26c 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -279,7 +279,7 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 -#define CONFIG_SYS_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */ +#define CONFIG_SYS_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */ #define CONFIG_SYS_INIT_RAM_CTRL 0x221 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ #define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 32) @@ -408,6 +408,21 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA) +#define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA) +#define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_IEC | \ + CF_CACR_ICINVA | CF_CACR_EUSP) +#define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \ + CF_CACR_DEC | CF_CACR_DDCM_P | \ + CF_CACR_DCINVA) & ~CF_CACR_ICINVA) + /*----------------------------------------------------------------------- * Memory bank definitions */ diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h index 4534002e473..d0077667f3a 100644 --- a/include/configs/M5475EVB.h +++ b/include/configs/M5475EVB.h @@ -286,6 +286,22 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA + \ + CF_CACR_IDCM) +#define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA) +#define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_BCINVA | \ + CF_CACR_IEC | CF_CACR_ICINVA) +#define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \ + CF_CACR_DEC | CF_CACR_DDCM_P | \ + CF_CACR_DCINVA) & ~CF_CACR_ICINVA) + /*----------------------------------------------------------------------- * Chipselect bank definitions */ diff --git a/include/configs/M5485EVB.h b/include/configs/M5485EVB.h index 971cb67bad1..f23b8b0efae 100644 --- a/include/configs/M5485EVB.h +++ b/include/configs/M5485EVB.h @@ -272,6 +272,22 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA + \ + CF_CACR_IDCM) +#define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA) +#define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_BCINVA | \ + CF_CACR_IEC | CF_CACR_ICINVA) +#define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \ + CF_CACR_DEC | CF_CACR_DDCM_P | \ + CF_CACR_DCINVA) & ~CF_CACR_ICINVA) + /*----------------------------------------------------------------------- * Chipselect bank definitions */ diff --git a/include/configs/TASREG.h b/include/configs/TASREG.h index 25f3a26f35f..b69f015c7cd 100644 --- a/include/configs/TASREG.h +++ b/include/configs/TASREG.h @@ -252,6 +252,17 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_DCM) +#define CONFIG_SYS_CACHE_ACR1 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CEIB | \ + CF_CACR_DBWE) + /*----------------------------------------------------------------------- * Memory bank definitions */ diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h index 1fe42f682a7..7c8281cae75 100644 --- a/include/configs/astro_mcf5373l.h +++ b/include/configs/astro_mcf5373l.h @@ -386,4 +386,15 @@ /* Cache Configuration */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINVA) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_EC | CF_CACR_CINVA | \ + CF_CACR_DCM_P) + #endif /* _CONFIG_ASTRO_MCF5373L_H */ diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index 1c3ea23c777..330e3ac6676 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -331,6 +331,19 @@ from which user programs will be started */ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ + CF_CACR_DISD | CF_CACR_INVI | \ + CF_CACR_CEIB | CF_CACR_DCM | \ + CF_CACR_EUSP) + /*----------------------------------------------------------------------- * Memory bank definitions * diff --git a/include/configs/idmr.h b/include/configs/idmr.h index 841affb7cce..61e3bad4f38 100644 --- a/include/configs/idmr.h +++ b/include/configs/idmr.h @@ -224,6 +224,19 @@ /* Cache Configuration */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ + CF_CACR_DISD | CF_CACR_INVI | \ + CF_CACR_CEIB | CF_CACR_DCM | \ + CF_CACR_EUSP) + /* Port configuration */ #define CONFIG_SYS_FECI2C 0xF0 diff --git a/lib_m68k/cache.c b/lib_m68k/cache.c index 84fb6c2fbca..ed881783f10 100644 --- a/lib_m68k/cache.c +++ b/lib_m68k/cache.c @@ -22,8 +22,129 @@ */ #include +#include +#include -void flush_cache (ulong start_addr, ulong size) +volatile int *cf_icache_status = (int *)ICACHE_STATUS; +volatile int *cf_dcache_status = (int *)DCACHE_STATUS; + +void flush_cache(ulong start_addr, ulong size) { /* Must be implemented for all M68k processors with copy-back data cache */ } + +int icache_status(void) +{ + return *cf_icache_status; +} + +int dcache_status(void) +{ + return *cf_dcache_status; +} + +void icache_enable(void) +{ + icache_invalid(); + + *cf_icache_status = 1; + +#ifdef CONFIG_CF_V4 + __asm__ __volatile__("movec %0, %%acr2"::"r"(CONFIG_SYS_CACHE_ACR2)); + __asm__ __volatile__("movec %0, %%acr3"::"r"(CONFIG_SYS_CACHE_ACR3)); +#elif defined(CONFIG_CF_V4e) + __asm__ __volatile__("movec %0, %%acr6"::"r"(CONFIG_SYS_CACHE_ACR6)); + __asm__ __volatile__("movec %0, %%acr7"::"r"(CONFIG_SYS_CACHE_ACR7)); +#else + __asm__ __volatile__("movec %0, %%acr0"::"r"(CONFIG_SYS_CACHE_ACR0)); + __asm__ __volatile__("movec %0, %%acr1"::"r"(CONFIG_SYS_CACHE_ACR1)); +#endif + + __asm__ __volatile__("movec %0, %%cacr"::"r"(CONFIG_SYS_CACHE_ICACR)); +} + +void icache_disable(void) +{ + u32 temp = 0; + + *cf_icache_status = 0; + icache_invalid(); + +#ifdef CONFIG_CF_V4 + __asm__ __volatile__("movec %0, %%acr2"::"r"(temp)); + __asm__ __volatile__("movec %0, %%acr3"::"r"(temp)); +#elif defined(CONFIG_CF_V4e) + __asm__ __volatile__("movec %0, %%acr6"::"r"(temp)); + __asm__ __volatile__("movec %0, %%acr7"::"r"(temp)); +#else + __asm__ __volatile__("movec %0, %%acr0"::"r"(temp)); + __asm__ __volatile__("movec %0, %%acr1"::"r"(temp)); + +#endif +} + +void icache_invalid(void) +{ + u32 temp; + + temp = CONFIG_SYS_ICACHE_INV; + if (*cf_icache_status) + temp |= CONFIG_SYS_CACHE_ICACR; + + __asm__ __volatile__("movec %0, %%cacr"::"r"(temp)); +} + +/* + * data cache only for ColdFire V4 such as MCF547x_8x, MCF5445x + * the dcache will be dummy in ColdFire V2 and V3 + */ +void dcache_enable(void) +{ + dcache_invalid(); + *cf_dcache_status = 1; + +#ifdef CONFIG_CF_V4 + __asm__ __volatile__("movec %0, %%acr0"::"r"(CONFIG_SYS_CACHE_ACR0)); + __asm__ __volatile__("movec %0, %%acr1"::"r"(CONFIG_SYS_CACHE_ACR1)); +#elif defined(CONFIG_CF_V4e) + __asm__ __volatile__("movec %0, %%acr4"::"r"(CONFIG_SYS_CACHE_ACR4)); + __asm__ __volatile__("movec %0, %%acr5"::"r"(CONFIG_SYS_CACHE_ACR5)); + +#endif + + __asm__ __volatile__("movec %0, %%cacr"::"r"(CONFIG_SYS_CACHE_DCACR)); +} + +void dcache_disable(void) +{ + u32 temp = 0; + + *cf_dcache_status = 0; + dcache_invalid(); + + __asm__ __volatile__("movec %0, %%cacr"::"r"(temp)); + +#ifdef CONFIG_CF_V4 + __asm__ __volatile__("movec %0, %%acr0"::"r"(temp)); + __asm__ __volatile__("movec %0, %%acr1"::"r"(temp)); +#elif defined(CONFIG_CF_V4e) + __asm__ __volatile__("movec %0, %%acr4"::"r"(temp)); + __asm__ __volatile__("movec %0, %%acr5"::"r"(temp)); + +#endif +} + +void dcache_invalid(void) +{ +#ifdef CONFIG_CF_V4 + u32 temp; + + temp = CONFIG_SYS_DCACHE_INV; + if (*cf_dcache_status) + temp |= CONFIG_SYS_CACHE_DCACR; + if (*cf_icache_status) + temp |= CONFIG_SYS_CACHE_ICACR; + + __asm__ __volatile__("movec %0, %%cacr"::"r"(temp)); +#endif +} -- cgit v1.3.1 From f26a247308568e32857a5cc054f7219510a7d44e Mon Sep 17 00:00:00 2001 From: TsiChung Liew Date: Mon, 15 Mar 2010 19:39:21 -0500 Subject: ColdFire: Fix incorrect M5253DEMO default environment The flash location is at 0xff800000, not 0 Signed-off-by: TsiChung Liew --- include/configs/M5253DEMO.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/configs') diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index 9944e12fe4e..b5af493b804 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -107,7 +107,7 @@ "upd=run load; run prog\0" \ "prog=prot off 0xff800000 0xff82ffff;" \ "era 0xff800000 0xff82ffff;" \ - "cp.b ${loadaddr} 0 ${filesize};" \ + "cp.b ${loadaddr} 0xff800000 ${filesize};" \ "save\0" \ "" #endif -- cgit v1.3.1