From 8d21d74bdf1f43ba2e50234cbf37429b8b065b72 Mon Sep 17 00:00:00 2001 From: Aristo Chen Date: Wed, 10 Jun 2026 13:24:24 +0000 Subject: mx6sabre: Move environment variables to .env files Move the shared environment from CFG_EXTRA_ENV_SETTINGS in mx6sabre_common.h to a common text environment fragment in include/env/nxp/mx6sabre_common.env. The mx6sabresd and mx6sabreauto board environments include this fragment and add their own console setting, which is the only board specific difference between them. The eMMC firmware update variables remain guarded by CONFIG_SUPPORT_EMMC_BOOT inside the fragment. The now unused CONSOLE_DEV defines and the linux/stringify.h include are dropped. The generated default environment is unchanged for both boards. This was verified by comparing the output of scripts/get_default_envs.sh before and after the change, which produced identical results. Signed-off-by: Aristo Chen Reviewed-by: Peng Fan --- include/env/nxp/mx6sabre_common.env | 114 ++++++++++++++++++++++++++++++++++++ 1 file changed, 114 insertions(+) create mode 100644 include/env/nxp/mx6sabre_common.env (limited to 'include/env') diff --git a/include/env/nxp/mx6sabre_common.env b/include/env/nxp/mx6sabre_common.env new file mode 100644 index 00000000000..5346cd4e953 --- /dev/null +++ b/include/env/nxp/mx6sabre_common.env @@ -0,0 +1,114 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ + +script=boot.scr +image=zImage +fdtfile=undefined +fdt_addr=0x18000000 +boot_fdt=try +ip_dyn=yes +dfuspi=dfu 0 sf 0:0:10000000:0 +dfu_alt_info_spl=spl raw 0x400 +dfu_alt_info_img=u-boot raw 0x10000 +dfu_alt_info=spl raw 0x400 +initrd_high=0xffffffff +splashimage=CONFIG_SYS_LOAD_ADDR +mmcdev=CONFIG_ENV_MMC_DEVICE_INDEX +mmcpart=1 +finduuid=part uuid mmc ${mmcdev}:2 uuid +update_sd_firmware=if test ${ip_dyn} = yes; then + setenv get_cmd dhcp; + else + setenv get_cmd tftp; + fi; + if mmc dev ${mmcdev}; then + if ${get_cmd} ${update_sd_firmware_filename}; then + setexpr fw_sz ${filesize} / 0x200; + setexpr fw_sz ${fw_sz} + 1; + mmc write ${loadaddr} 0x2 ${fw_sz}; + fi; + fi +#ifdef CONFIG_SUPPORT_EMMC_BOOT +emmcdev=2 +update_emmc_firmware=if test ${ip_dyn} = yes; then + setenv get_cmd dhcp; + else + setenv get_cmd tftp; + fi; + if ${get_cmd} ${update_sd_firmware_filename}; then + if mmc dev ${emmcdev} 1; then + setexpr fw_sz ${filesize} / 0x200; + setexpr fw_sz ${fw_sz} + 1; + mmc write ${loadaddr} 0x2 ${fw_sz}; + fi; + fi +#endif +mmcargs=setenv bootargs console=${console},${baudrate} root=PARTUUID=${uuid} rootwait rw +loadbootscript=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script} || + load mmc ${mmcdev}:${mmcpart} ${loadaddr} boot/${script}; +bootscript=echo Running bootscript from mmc ...; source +loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image} || + load mmc ${mmcdev}:${mmcpart} ${loadaddr} boot/${image} +loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdtfile} || + load mmc ${mmcdev}:${mmcpart} ${fdt_addr} boot/${fdtfile} +mmcboot=echo Booting from mmc ...; + run finduuid; + run mmcargs; + if test ${boot_fdt} = yes || test ${boot_fdt} = try; then + if run loadfdt; then + bootz ${loadaddr} - ${fdt_addr}; + else + if test ${boot_fdt} = try; then + bootz; + else + echo WARN: Cannot load the DT; + fi; + fi; + else + bootz; + fi; +netargs=setenv bootargs console=${console},${baudrate} root=/dev/nfs + ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp +netboot=echo Booting from net ...; + run netargs; + if test ${ip_dyn} = yes; then + setenv get_cmd dhcp; + else + setenv get_cmd tftp; + fi; + ${get_cmd} ${image}; + if test ${boot_fdt} = yes || test ${boot_fdt} = try; then + if ${get_cmd} ${fdt_addr} ${fdtfile}; then + bootz ${loadaddr} - ${fdt_addr}; + else + if test ${boot_fdt} = try; then + bootz; + else + echo WARN: Cannot load the DT; + fi; + fi; + else + bootz; + fi; +findfdt=if test $fdtfile = undefined; then + if test $board_name = SABREAUTO && test $board_rev = MX6QP; then + setenv fdtfile imx6qp-sabreauto.dtb; + fi; + if test $board_name = SABREAUTO && test $board_rev = MX6Q; then + setenv fdtfile imx6q-sabreauto.dtb; + fi; + if test $board_name = SABREAUTO && test $board_rev = MX6DL; then + setenv fdtfile imx6dl-sabreauto.dtb; + fi; + if test $board_name = SABRESD && test $board_rev = MX6QP; then + setenv fdtfile imx6qp-sabresd.dtb; + fi; + if test $board_name = SABRESD && test $board_rev = MX6Q; then + setenv fdtfile imx6q-sabresd.dtb; + fi; + if test $board_name = SABRESD && test $board_rev = MX6DL; then + setenv fdtfile imx6dl-sabresd.dtb; + fi; + if test $fdtfile = undefined; then + echo WARNING: Could not determine dtb to use; + fi; + fi; -- cgit v1.3.1