From 29b7efae505eeed24e9d0a247a6ddff19ddfe49a Mon Sep 17 00:00:00 2001 From: Alexander Dahl Date: Wed, 20 Mar 2024 10:02:10 +0100 Subject: mtd: nand: raw: Port another option flag from Linux Introduced in upstream Linux with commit 7a08dbaedd365 for release v5.0. When the new atmel nand driver was backported to U-Boot with commit 6a8dfd57220d ("nand: atmel: Add DM based NAND driver") that definition was added to the driver instead of the header file. Move it over to the other definitions with the same help text it has in Linux. Code actually using this has not been ported over to raw nand base yet. Link: https://lore.kernel.org/all/20240320090214.40465-3-ada@thorsis.com Signed-off-by: Alexander Dahl Reviewed-by: Michael Trimarchi Signed-off-by: Dario Binacchi --- include/linux/mtd/rawnand.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h index fb002ae6411..4abaf4734cf 100644 --- a/include/linux/mtd/rawnand.h +++ b/include/linux/mtd/rawnand.h @@ -249,6 +249,13 @@ enum nand_ecc_algo { */ #define NAND_USE_BOUNCE_BUFFER 0x00100000 +/* + * Do not try to tweak the timings at runtime. This is needed when the + * controller initializes the timings on itself or when it relies on + * configuration done by the bootloader. + */ +#define NAND_KEEP_TIMINGS 0x00800000 + /* Options set by nand scan */ /* bbt has already been read */ #define NAND_BBT_SCANNED 0x40000000 -- cgit v1.3.1 From cd6d71a2e98d3ba51ea1e63a2fb2927738ab1c99 Mon Sep 17 00:00:00 2001 From: Bruce Suen Date: Mon, 11 Mar 2024 21:43:14 -0400 Subject: mtd: spinand: Add support for XTX SPINAND Add support for XTX XT26G0xA and XT26xxxD. The driver is ported from linux-6.7.1. This driver is tested on Banana BPI-R3 with XT26G01A and XT26G12D. Link: https://lore.kernel.org/all/20240312014314.15454-1-bruce_suen@163.com Signed-off-by: Bruce Suen Reviewed-by: Frieder Schrempf Signed-off-by: Dario Binacchi --- drivers/mtd/nand/spi/Makefile | 2 +- drivers/mtd/nand/spi/core.c | 1 + drivers/mtd/nand/spi/xtx.c | 266 ++++++++++++++++++++++++++++++++++++++++++ include/linux/mtd/spinand.h | 1 + 4 files changed, 269 insertions(+), 1 deletion(-) create mode 100644 drivers/mtd/nand/spi/xtx.c (limited to 'include/linux') diff --git a/drivers/mtd/nand/spi/Makefile b/drivers/mtd/nand/spi/Makefile index f172f4787f8..65b836b34ca 100644 --- a/drivers/mtd/nand/spi/Makefile +++ b/drivers/mtd/nand/spi/Makefile @@ -1,5 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 spinand-objs := core.o esmt.o gigadevice.o macronix.o micron.o paragon.o -spinand-objs += toshiba.o winbond.o +spinand-objs += toshiba.o winbond.o xtx.o obj-$(CONFIG_MTD_SPI_NAND) += spinand.o diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c index 8ca33459f96..62c28aa422d 100644 --- a/drivers/mtd/nand/spi/core.c +++ b/drivers/mtd/nand/spi/core.c @@ -829,6 +829,7 @@ static const struct spinand_manufacturer *spinand_manufacturers[] = { &toshiba_spinand_manufacturer, &winbond_spinand_manufacturer, &esmt_c8_spinand_manufacturer, + &xtx_spinand_manufacturer, }; static int spinand_manufacturer_match(struct spinand_device *spinand, diff --git a/drivers/mtd/nand/spi/xtx.c b/drivers/mtd/nand/spi/xtx.c new file mode 100644 index 00000000000..aee1849a71f --- /dev/null +++ b/drivers/mtd/nand/spi/xtx.c @@ -0,0 +1,266 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Author: + * Felix Matouschek + */ + +#include +#ifndef __UBOOT__ +#include +#include +#endif +#include + +#define SPINAND_MFR_XTX 0x0B + +#define XT26G0XA_STATUS_ECC_MASK GENMASK(5, 2) +#define XT26G0XA_STATUS_ECC_NO_DETECTED (0 << 2) +#define XT26G0XA_STATUS_ECC_8_CORRECTED (3 << 4) +#define XT26G0XA_STATUS_ECC_UNCOR_ERROR (2 << 4) + +#define XT26XXXD_STATUS_ECC3_ECC2_MASK GENMASK(7, 6) +#define XT26XXXD_STATUS_ECC_NO_DETECTED (0) +#define XT26XXXD_STATUS_ECC_1_7_CORRECTED (1) +#define XT26XXXD_STATUS_ECC_8_CORRECTED (3) +#define XT26XXXD_STATUS_ECC_UNCOR_ERROR (2) + +static SPINAND_OP_VARIANTS(read_cache_variants, + SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 1, NULL, 0), + SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0), + SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0), + SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0), + SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0), + SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0)); + +static SPINAND_OP_VARIANTS(write_cache_variants, + SPINAND_PROG_LOAD_X4(true, 0, NULL, 0), + SPINAND_PROG_LOAD(true, 0, NULL, 0)); + +static SPINAND_OP_VARIANTS(update_cache_variants, + SPINAND_PROG_LOAD_X4(false, 0, NULL, 0), + SPINAND_PROG_LOAD(false, 0, NULL, 0)); + +static int xt26g0xa_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *region) +{ + if (section) + return -ERANGE; + + region->offset = 48; + region->length = 16; + + return 0; +} + +static int xt26g0xa_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *region) +{ + if (section) + return -ERANGE; + + region->offset = 1; + region->length = 47; + + return 0; +} + +static const struct mtd_ooblayout_ops xt26g0xa_ooblayout = { + .ecc = xt26g0xa_ooblayout_ecc, + .rfree = xt26g0xa_ooblayout_free, +}; + +static int xt26g0xa_ecc_get_status(struct spinand_device *spinand, + u8 status) +{ + status = status & XT26G0XA_STATUS_ECC_MASK; + + switch (status) { + case XT26G0XA_STATUS_ECC_NO_DETECTED: + return 0; + case XT26G0XA_STATUS_ECC_8_CORRECTED: + return 8; + case XT26G0XA_STATUS_ECC_UNCOR_ERROR: + return -EBADMSG; + default: + break; + } + + /* At this point values greater than (2 << 4) are invalid */ + if (status > XT26G0XA_STATUS_ECC_UNCOR_ERROR) + return -EINVAL; + + /* (1 << 2) through (7 << 2) are 1-7 corrected errors */ + return status >> 2; +} + +static int xt26xxxd_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *region) +{ + if (section) + return -ERANGE; + + region->offset = mtd->oobsize / 2; + region->length = mtd->oobsize / 2; + + return 0; +} + +static int xt26xxxd_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *region) +{ + if (section) + return -ERANGE; + + region->offset = 2; + region->length = mtd->oobsize / 2 - 2; + + return 0; +} + +static const struct mtd_ooblayout_ops xt26xxxd_ooblayout = { + .ecc = xt26xxxd_ooblayout_ecc, + .rfree = xt26xxxd_ooblayout_free, +}; + +static int xt26xxxd_ecc_get_status(struct spinand_device *spinand, + u8 status) +{ + switch (FIELD_GET(STATUS_ECC_MASK, status)) { + case XT26XXXD_STATUS_ECC_NO_DETECTED: + return 0; + case XT26XXXD_STATUS_ECC_UNCOR_ERROR: + return -EBADMSG; + case XT26XXXD_STATUS_ECC_1_7_CORRECTED: + return 4 + FIELD_GET(XT26XXXD_STATUS_ECC3_ECC2_MASK, status); + case XT26XXXD_STATUS_ECC_8_CORRECTED: + return 8; + default: + break; + } + + return -EINVAL; +} + +static const struct spinand_info xtx_spinand_table[] = { + SPINAND_INFO("XT26G01A", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0xE1), + NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1), + NAND_ECCREQ(8, 512), + SPINAND_INFO_OP_VARIANTS(&read_cache_variants, + &write_cache_variants, + &update_cache_variants), + SPINAND_HAS_QE_BIT, + SPINAND_ECCINFO(&xt26g0xa_ooblayout, + xt26g0xa_ecc_get_status)), + SPINAND_INFO("XT26G02A", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0xE2), + NAND_MEMORG(1, 2048, 64, 64, 2048, 40, 1, 1, 1), + NAND_ECCREQ(8, 512), + SPINAND_INFO_OP_VARIANTS(&read_cache_variants, + &write_cache_variants, + &update_cache_variants), + SPINAND_HAS_QE_BIT, + SPINAND_ECCINFO(&xt26g0xa_ooblayout, + xt26g0xa_ecc_get_status)), + SPINAND_INFO("XT26G04A", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0xE3), + NAND_MEMORG(1, 2048, 64, 128, 2048, 40, 1, 1, 1), + NAND_ECCREQ(8, 512), + SPINAND_INFO_OP_VARIANTS(&read_cache_variants, + &write_cache_variants, + &update_cache_variants), + SPINAND_HAS_QE_BIT, + SPINAND_ECCINFO(&xt26g0xa_ooblayout, + xt26g0xa_ecc_get_status)), + SPINAND_INFO("XT26G01D", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x31), + NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1), + NAND_ECCREQ(8, 512), + SPINAND_INFO_OP_VARIANTS(&read_cache_variants, + &write_cache_variants, + &update_cache_variants), + 0, + SPINAND_ECCINFO(&xt26xxxd_ooblayout, + xt26xxxd_ecc_get_status)), + SPINAND_INFO("XT26G11D", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x34), + NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1), + NAND_ECCREQ(8, 512), + SPINAND_INFO_OP_VARIANTS(&read_cache_variants, + &write_cache_variants, + &update_cache_variants), + 0, + SPINAND_ECCINFO(&xt26xxxd_ooblayout, + xt26xxxd_ecc_get_status)), + SPINAND_INFO("XT26Q01D", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x51), + NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1), + NAND_ECCREQ(8, 512), + SPINAND_INFO_OP_VARIANTS(&read_cache_variants, + &write_cache_variants, + &update_cache_variants), + 0, + SPINAND_ECCINFO(&xt26xxxd_ooblayout, + xt26xxxd_ecc_get_status)), + SPINAND_INFO("XT26G02D", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x32), + NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1), + NAND_ECCREQ(8, 512), + SPINAND_INFO_OP_VARIANTS(&read_cache_variants, + &write_cache_variants, + &update_cache_variants), + 0, + SPINAND_ECCINFO(&xt26xxxd_ooblayout, + xt26xxxd_ecc_get_status)), + SPINAND_INFO("XT26G12D", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x35), + NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1), + NAND_ECCREQ(8, 512), + SPINAND_INFO_OP_VARIANTS(&read_cache_variants, + &write_cache_variants, + &update_cache_variants), + 0, + SPINAND_ECCINFO(&xt26xxxd_ooblayout, + xt26xxxd_ecc_get_status)), + SPINAND_INFO("XT26Q02D", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x52), + NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1), + NAND_ECCREQ(8, 512), + SPINAND_INFO_OP_VARIANTS(&read_cache_variants, + &write_cache_variants, + &update_cache_variants), + 0, + SPINAND_ECCINFO(&xt26xxxd_ooblayout, + xt26xxxd_ecc_get_status)), + SPINAND_INFO("XT26G04D", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x33), + NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1), + NAND_ECCREQ(8, 512), + SPINAND_INFO_OP_VARIANTS(&read_cache_variants, + &write_cache_variants, + &update_cache_variants), + 0, + SPINAND_ECCINFO(&xt26xxxd_ooblayout, + xt26xxxd_ecc_get_status)), + SPINAND_INFO("XT26Q04D", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x53), + NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1), + NAND_ECCREQ(8, 512), + SPINAND_INFO_OP_VARIANTS(&read_cache_variants, + &write_cache_variants, + &update_cache_variants), + 0, + SPINAND_ECCINFO(&xt26xxxd_ooblayout, + xt26xxxd_ecc_get_status)), +}; + +static const struct spinand_manufacturer_ops xtx_spinand_manuf_ops = { +}; + +const struct spinand_manufacturer xtx_spinand_manufacturer = { + .id = SPINAND_MFR_XTX, + .name = "XTX", + .chips = xtx_spinand_table, + .nchips = ARRAY_SIZE(xtx_spinand_table), + .ops = &xtx_spinand_manuf_ops, +}; diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h index 6f479fa5adc..13b5a52f8b9 100644 --- a/include/linux/mtd/spinand.h +++ b/include/linux/mtd/spinand.h @@ -251,6 +251,7 @@ extern const struct spinand_manufacturer paragon_spinand_manufacturer; extern const struct spinand_manufacturer toshiba_spinand_manufacturer; extern const struct spinand_manufacturer winbond_spinand_manufacturer; extern const struct spinand_manufacturer esmt_c8_spinand_manufacturer; +extern const struct spinand_manufacturer xtx_spinand_manufacturer; /** * struct spinand_op_variants - SPI NAND operation variants -- cgit v1.3.1