From 08f80184a917077e8ebb7c7646d78eafae921982 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Tue, 2 Aug 2022 07:33:29 -0400 Subject: arm: Remove snapper9260 board This board is behind on several mandatory DM migrations and is missing OF_CONTROL support that makes other conversions impossible. Remove it. Cc: Simon Glass Signed-off-by: Tom Rini Reviewed-by: Simon Glass --- include/configs/snapper9260.h | 80 ------------------------------------------- 1 file changed, 80 deletions(-) delete mode 100644 include/configs/snapper9260.h (limited to 'include') diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h deleted file mode 100644 index 7adb349f9a5..00000000000 --- a/include/configs/snapper9260.h +++ /dev/null @@ -1,80 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Bluewater Systems Snapper 9260 and 9G20 modules - * - * (C) Copyright 2011 Bluewater Systems - * Author: Andre Renaud - * Author: Ryan Mallon - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* SoC type is defined in boards.cfg */ -#include -#include - -/* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* External Crystal, in Hz */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 - -/* CPU */ - -/* SDRAM */ -#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 -#define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) /* 64MB */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM1 - -/* Mem test settings */ - -/* NAND Flash */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 -#define CONFIG_SYS_NAND_DBW_8 -#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) /* AD21 */ -#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) /* AD22 */ -#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 -#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 - -/* GPIOs and IO expander */ -#define CONFIG_PCA953X -#define CONFIG_SYS_I2C_PCA953X_ADDR 0x28 -#define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x28, 16} } - -/* UARTs/Serial console */ -#ifndef CONFIG_DM_SERIAL -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID ATMEL_ID_SYS -#endif - -/* I2C - Bit-bashed */ -#define CONFIG_SOFT_I2C_READ_REPEATED_START -#define I2C_INIT do { \ - at91_set_gpio_output(AT91_PIN_PA23, 1); \ - at91_set_gpio_output(AT91_PIN_PA24, 1); \ - at91_set_pio_multi_drive(AT91_PIO_PORTA, 23, 1); \ - at91_set_pio_multi_drive(AT91_PIO_PORTA, 24, 1); \ - } while (0) -#define I2C_SOFT_DECLARATIONS -#define I2C_ACTIVE -#define I2C_TRISTATE at91_set_gpio_input(AT91_PIN_PA23, 1); -#define I2C_READ at91_get_gpio_value(AT91_PIN_PA23); -#define I2C_SDA(bit) do { \ - if (bit) { \ - at91_set_gpio_input(AT91_PIN_PA23, 1); \ - } else { \ - at91_set_gpio_output(AT91_PIN_PA23, 1); \ - at91_set_gpio_value(AT91_PIN_PA23, bit); \ - } \ - } while (0) -#define I2C_SCL(bit) at91_set_pio_value(AT91_PIO_PORTA, 24, bit) -#define I2C_DELAY udelay(2) - -/* Boot options */ - -/* Environment settings */ - -/* Console settings */ - -#endif /* __CONFIG_H */ -- cgit v1.2.3