From 3ac3708d168e1f85616817aae077326a6786ab59 Mon Sep 17 00:00:00 2001 From: Franz Schnyder Date: Thu, 11 Jun 2026 15:47:48 +0200 Subject: board: toradex: add initial support for aquila imx95 Add initial U-Boot support for Aquila iMX95 SoM. Link: https://www.toradex.com/computer-on-modules/aquila-arm-family/nxp-imx95 Link: https://www.toradex.com/products/carrier-board/aquila-development-board-kit Signed-off-by: Franz Schnyder Reviewed-by: Francesco Dolcini --- include/configs/aquila-imx95.h | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 include/configs/aquila-imx95.h (limited to 'include') diff --git a/include/configs/aquila-imx95.h b/include/configs/aquila-imx95.h new file mode 100644 index 00000000000..07d09d138cb --- /dev/null +++ b/include/configs/aquila-imx95.h @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* Copyright (c) Toradex */ + +#ifndef __AQUILA_IMX95_H +#define __AQUILA_IMX95_H + +#include +#include + +#define CFG_SYS_UBOOT_BASE \ + (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) + +/* module has 8GB, 2GB from 0x80000000..0xffffffff, 6GB above */ +#define SZ_6G _AC(0x180000000, ULL) + +/* first 256MB reserved for firmware */ +#define CFG_SYS_INIT_RAM_ADDR 0x90000000 +#define CFG_SYS_INIT_RAM_SIZE SZ_2M + +#define CFG_SYS_SDRAM_BASE 0x90000000 +#define PHYS_SDRAM 0x90000000 +#define PHYS_SDRAM_SIZE (SZ_2G - SZ_256M) +#define PHYS_SDRAM_2_SIZE SZ_6G + +#define CFG_SYS_SECURE_SDRAM_BASE 0x8A000000 /* Secure DDR region for A55, SPL could use first 2MB */ +#define CFG_SYS_SECURE_SDRAM_SIZE 0x06000000 + +#endif -- cgit v1.3.1