From 491f6c2f291657dce8b67d85c15aaa9c03766b8e Mon Sep 17 00:00:00 2001 From: Albert ARIBAUD Date: Thu, 16 Aug 2012 06:35:21 +0000 Subject: edminiv2: orion5x: fix GPIO inits and values Orion5x did not actually write GPIO output values or input polarities, and ED Mini V2 had bad or missing values for GPIO settings. Signed-off-by: Albert ARIBAUD Acked-By: Prafulla Wadaskar --- include/configs/edminiv2.h | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index f0fb48828ae..f2cfaf8350e 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -69,13 +69,18 @@ * - GPIO16 is Power LED control (0 = on, 1 = off) * - GPIO17 is Power LED source select (0 = CPLD, 1 = GPIO16) * - GPIO18 is Power Button status (0 = Released, 1 = Pressed) - * - Last GPIO is 26, further bits are supposed to be 0. + * - GPIO19 is SATA disk power toggle (toggles on 0-to-1) + * - GPIO22 is SATA disk power status () + * - GPIO23 is supply status for SATA disk () + * - GPIO24 is supply control for board (write 1 to power off) + * Last GPIO is 25, further bits are supposed to be 0. * Enable mask has ones for INPUT, 0 for OUTPUT. - * Default is LED ON. + * Default is LED ON, board ON :) */ -#define ORION5X_GPIO_OUT_ENABLE 0x03fcffff -#define ORION5X_GPIO_OUT_VALUE 0x03fcffff +#define ORION5X_GPIO_OUT_ENABLE 0xfef4f0ca +#define ORION5X_GPIO_OUT_VALUE 0x00000000 +#define ORION5X_GPIO_IN_POLARITY 0x000000d0 /* * NS16550 Configuration -- cgit v1.3.1