From d8da22c5dbdc7bc61b575278ea0e02919ffbe734 Mon Sep 17 00:00:00 2001
From: Fabio Estevam <festevam@gmail.com>
Date: Thu, 18 Jun 2020 20:21:20 -0300
Subject: mx6cuboxi: Convert to DM_ETH

Migration to DM_ETH is mandatory, so convert mx6cuboxi to Ethernet
Driver Model.

This also brings the benefit of restoring Ethernet functionality.

Reported-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Tom Rini <trini@konsulko.com>
---
 include/configs/mx6cuboxi.h | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'include')

diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h
index 2ccf44e5739..96f79e6b58c 100644
--- a/include/configs/mx6cuboxi.h
+++ b/include/configs/mx6cuboxi.h
@@ -29,12 +29,6 @@
 #define CONFIG_LBA48
 #endif
 
-/* Ethernet Configuration */
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE			ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE		RGMII
-#define CONFIG_FEC_MXC_PHYADDR		0
-
 /* Framebuffer */
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_SPLASH_SCREEN
-- 
cgit v1.3.1


From 506619da80a61d2b24e5deecce41889af2fe4106 Mon Sep 17 00:00:00 2001
From: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Date: Tue, 16 Jun 2020 22:20:01 +0300
Subject: colibri-imx8x: declare consoleargs

Store all console-related kernel parameters
in dedicated variable.

Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
---
 include/configs/colibri-imx8x.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'include')

diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h
index da9226e2fbe..7d007071e5f 100644
--- a/include/configs/colibri-imx8x.h
+++ b/include/configs/colibri-imx8x.h
@@ -62,7 +62,7 @@
 #define BOOTENV_RUN_NET_USB_START ""
 
 #define CONFIG_MFG_ENV_SETTINGS \
-	"mfgtool_args=setenv bootargs console=${console},${baudrate} " \
+	"mfgtool_args=setenv bootargs ${consoleargs} " \
 		"rdinit=/linuxrc g_mass_storage.stall=0 " \
 		"g_mass_storage.removable=1 g_mass_storage.idVendor=0x066F " \
 		"g_mass_storage.idProduct=0x37FF " \
@@ -81,7 +81,7 @@
 	M4_BOOT_ENV \
 	MEM_LAYOUT_ENV_SETTINGS \
 	"boot_file=Image\0" \
-	"console=ttyLP3 earlycon\0" \
+	"consoleargs=console=ttyLP3,${baudrate} earlycon\0" \
 	"fdt_addr=0x83000000\0"	\
 	"fdt_file=fsl-imx8qxp-colibri-dsihdmi-eval-v3.dtb\0" \
 	"fdtfile=fsl-imx8qxp-colibri-dsihdmi-eval-v3.dtb\0" \
@@ -89,11 +89,11 @@
 	"image=Image\0" \
 	"initrd_addr=0x83800000\0" \
 	"initrd_high=0xffffffffffffffff\0" \
-	"mmcargs=setenv bootargs console=${console},${baudrate} " \
+	"mmcargs=setenv bootargs ${consoleargs} " \
 		"root=PARTUUID=${uuid} rootwait " \
 	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
-	"netargs=setenv bootargs console=${console},${baudrate} " \
+	"netargs=setenv bootargs ${consoleargs} " \
 		"root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp " \
 		"${vidargs}\0" \
 	"nfsboot=run netargs; dhcp ${loadaddr} ${image}; tftp ${fdt_addr} " \
-- 
cgit v1.3.1


From d3976cc2feddedf4283b9a567c8157e0ccb4226e Mon Sep 17 00:00:00 2001
From: Stefan Agner <stefan.agner@toradex.com>
Date: Tue, 16 Jun 2020 22:20:02 +0300
Subject: colibri_imx7: add addresses required for distro boot

Define addresses required for full distro boot support.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
---
 include/configs/colibri_imx7.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'include')

diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h
index 09722f47e78..b550bc61566 100644
--- a/include/configs/colibri_imx7.h
+++ b/include/configs/colibri_imx7.h
@@ -109,8 +109,9 @@
 	"bootm_size=0x10000000\0" \
 	"fdt_addr_r=0x82000000\0" \
 	"kernel_addr_r=0x81000000\0" \
+	"pxefile_addr_r=0x87100000\0" \
 	"ramdisk_addr_r=0x82100000\0" \
-	"scriptaddr=0x82500000\0"
+	"scriptaddr=0x87000000\0"
 
 #define NFS_BOOTCMD \
 	"nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
-- 
cgit v1.3.1


From b0a8cefd5b2b5128f8dc406002acd558679fbe5d Mon Sep 17 00:00:00 2001
From: Stefan Agner <stefan.agner@toradex.com>
Date: Tue, 16 Jun 2020 22:20:03 +0300
Subject: colibri-imx6ull/imx7: define bootubipart for distro boot

When using distro boot to boot from UBI volumes the boot partition
has been hardcoded to "UBI" (capital letters). However, our default
MTD layout uses "ubi" (lower case letter). Define "ubi" as the
default UBI partition for distro boot for Toradex. This allows to
use distro boot without having to redefine the MTD partition layout
which is useful for TorizonCore.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
---
 include/configs/colibri-imx6ull.h | 1 +
 include/configs/colibri_imx7.h    | 1 +
 2 files changed, 2 insertions(+)

(limited to 'include')

diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h
index 2d3b4c18177..c80fb96fe2c 100644
--- a/include/configs/colibri-imx6ull.h
+++ b/include/configs/colibri-imx6ull.h
@@ -88,6 +88,7 @@
 	NFS_BOOTCMD \
 	UBI_BOOTCMD \
 	UBOOT_UPDATE \
+	"bootubipart=ubi\0" \
 	"console=ttymxc0\0" \
 	"defargs=user_debug=30\0" \
 	"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h
index b550bc61566..b3f660b6fa2 100644
--- a/include/configs/colibri_imx7.h
+++ b/include/configs/colibri_imx7.h
@@ -169,6 +169,7 @@
 	MODULE_EXTRA_ENV_SETTINGS \
 	UBOOT_UPDATE \
 	"boot_file=zImage\0" \
+	"bootubipart=ubi\0" \
 	"console=ttymxc0\0" \
 	"defargs=\0" \
 	"fdt_board=eval-v3\0" \
-- 
cgit v1.3.1


From 1fd988a9fade5ecff8a6841f9f7932cf83ee18cd Mon Sep 17 00:00:00 2001
From: Max Krummenacher <max.krummenacher@toradex.com>
Date: Tue, 16 Jun 2020 22:20:05 +0300
Subject: configs/colibri_vf.h: drop sdboot in favour of distro_bootcmd

The distro bootscript uses kernel_image to get the file name of
the kernel, so change that variable name.
UBI boot has precedence in the default boot command. If one wants
to boot from SD with a working NAND installation stop in U-Boot
and enter:

setenv fdtfile ${soc}-colibri-${fdt_board}.dtb && run distro_bootcmd

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
---
 include/configs/colibri_vf.h | 18 +-----------------
 1 file changed, 1 insertion(+), 17 deletions(-)

(limited to 'include')

diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 7d17bd8e6a0..012350d9bf6 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -69,21 +69,6 @@
 	"tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
 	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 
-#define SD_BOOTCMD \
-	"set_sdargs=setenv sdargs root=PARTUUID=${uuid} ro rootwait\0"	\
-	"sdboot=run setup; run sdfinduuid; run set_sdargs; " \
-	"setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
-	"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
-	"load mmc ${sddev}:${sdbootpart} ${kernel_addr_r} ${kernel_file} && " \
-	"load mmc ${sddev}:${sdbootpart} ${fdt_addr_r} " \
-		"${soc}-colibri-${fdt_board}.dtb && " \
-	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
-	"sdbootpart=1\0" \
-	"sddev=0\0" \
-	"sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
-	"sdrootpart=2\0"
-
-
 #define UBI_BOOTCMD \
 	"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
 	"ubi.fm_autoconvert=1\0" \
@@ -112,7 +97,6 @@
 	BOOTENV \
 	MEM_LAYOUT_ENV_SETTINGS \
 	NFS_BOOTCMD \
-	SD_BOOTCMD \
 	UBI_BOOTCMD \
 	UBOOT_UPDATE \
 	"console=ttyLP0\0" \
@@ -120,7 +104,7 @@
 	"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
 	"fdt_board=eval-v3\0" \
 	"fdt_fixup=;\0" \
-	"kernel_file=zImage\0" \
+	"kernel_image=zImage\0" \
 	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 	"setsdupdate=mmc rescan && set interface mmc && " \
 		"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
-- 
cgit v1.3.1


From adff136c28704ca0d13194e139a39f0ac45721ad Mon Sep 17 00:00:00 2001
From: Igor Opaniuk <igor.opaniuk@toradex.com>
Date: Tue, 16 Jun 2020 22:20:06 +0300
Subject: apalis-tk1: enable distroboot

1. Use distro_bootcmd as default boot command instead of
legacy emmcboot wrapper.
2. Drop emmcboot and sdboot wrappers.
3. Provide proper boot order for Distro Boot.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
---
 configs/apalis-tk1_defconfig |  2 +-
 include/configs/apalis-tk1.h | 51 ++++++++++++--------------------------------
 2 files changed, 15 insertions(+), 38 deletions(-)

(limited to 'include')

diff --git a/configs/apalis-tk1_defconfig b/configs/apalis-tk1_defconfig
index 868303a29cc..db66d68f637 100644
--- a/configs/apalis-tk1_defconfig
+++ b/configs/apalis-tk1_defconfig
@@ -11,7 +11,7 @@ CONFIG_SPL_TEXT_BASE=0x80108000
 CONFIG_FIT=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_BOOTDELAY=1
-CONFIG_BOOTCOMMAND="run emmcboot; setenv fdtfile ${soc}-${fdt-module}-${fdt_board}.dtb && run distro_bootcmd"
+CONFIG_BOOTCOMMAND="setenv fdtfile ${soc}-${fdt-module}-${fdt_board}.dtb && run distro_bootcmd"
 CONFIG_CONSOLE_MUX=y
 CONFIG_SYS_STDIO_DEREGISTER=y
 CONFIG_VERSION_VARIABLE=y
diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h
index 965259c5e1e..6f736064278 100644
--- a/include/configs/apalis-tk1.h
+++ b/include/configs/apalis-tk1.h
@@ -34,6 +34,20 @@
 /* General networking support */
 #define CONFIG_TFTP_TSIZE
 
+/*
+ * Custom Distro Boot configuration:
+ * 1. 8bit SD port (MMC1)
+ * 2. 4bit SD port (MMC2)
+ * 3. eMMC (MMC0)
+ */
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 1) \
+	func(MMC, mmc, 2) \
+	func(MMC, mmc, 0) \
+	func(USB, usb, 0) \
+	func(PXE, pxe, na) \
+	func(DHCP, dhcp, na)
+
 #undef CONFIG_IPADDR
 #define CONFIG_IPADDR		192.168.10.2
 #define CONFIG_NETMASK		255.255.255.0
@@ -54,24 +68,6 @@
 	"update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
 		"mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \
 
-#define EMMC_BOOTCMD \
-	"set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} " \
-		"ro rootfstype=ext4 rootwait\0" \
-	"emmcboot=run setup; run emmcfinduuid; run set_emmcargs; " \
-		"setenv bootargs ${defargs} ${emmcargs} " \
-		"${setupargs} ${vidargs}; echo Booting from internal eMMC; " \
-		"run emmcdtbload; " \
-		"load mmc ${emmcdev}:${emmcbootpart} ${kernel_addr_r} " \
-		"${boot_file} && run fdt_fixup && " \
-		"bootz ${kernel_addr_r} - ${dtbparam}\0" \
-	"emmcbootpart=1\0" \
-	"emmcdev=0\0" \
-	"emmcdtbload=setenv dtbparam; load mmc ${emmcdev}:${emmcbootpart} " \
-		"${fdt_addr_r} ${soc}-${fdt_module}-${fdt_board}.dtb && " \
-		"setenv dtbparam ${fdt_addr_r}\0" \
-	"emmcfinduuid=part uuid mmc ${mmcdev}:${emmcrootpart} uuid\0" \
-	"emmcrootpart=2\0"
-
 #define NFS_BOOTCMD \
 	"nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
 	"nfsboot=pci enum; run setup; setenv bootargs ${defargs} ${nfsargs} " \
@@ -82,23 +78,6 @@
 		"${soc}-${fdt_module}-${fdt_board}.dtb " \
 		"&& setenv dtbparam ${fdt_addr_r}\0"
 
-#define SD_BOOTCMD \
-	"set_sdargs=setenv sdargs ip=off root=PARTUUID=${uuid} ro " \
-	"rootfstype=ext4 rootwait\0" \
-	"sdboot=run setup; run sdfinduuid; run set_sdargs; " \
-		"setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
-		"${vidargs}; echo Booting from SD card in 8bit slot...; " \
-		"run sddtbload; load mmc ${sddev}:${sdbootpart} " \
-		"${kernel_addr_r} ${boot_file} && run fdt_fixup && " \
-		"bootz ${kernel_addr_r} - ${dtbparam}\0" \
-	"sdbootpart=1\0" \
-	"sddev=1\0" \
-	"sddtbload=setenv dtbparam; load mmc ${sddev}:${sdbootpart} " \
-		"${fdt_addr_r} ${soc}-${fdt_module}-${fdt_board}.dtb " \
-		"&& setenv dtbparam ${fdt_addr_r}\0" \
-	"sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
-	"sdrootpart=2\0"
-
 #define BOARD_EXTRA_ENV_SETTINGS \
 	"boot_file=zImage\0" \
 	"console=ttyS0\0" \
@@ -106,12 +85,10 @@
 		"usb_port_owner_info=2 lane_owner_info=6 emc_max_dvfs=0 " \
 		"user_debug=30 pcie_aspm=off\0" \
 	"dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
-	EMMC_BOOTCMD \
 	"fdt_board=eval\0" \
 	"fdt_fixup=;\0" \
 	"fdt_module=" FDT_MODULE "\0" \
 	NFS_BOOTCMD \
-	SD_BOOTCMD \
 	UBOOT_UPDATE \
 	"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 		"00:14:2d:00:00:00; fi; pci enum && tftpboot ${loadaddr} " \
-- 
cgit v1.3.1


From 8b9c0cb464717581d8d33e5b0c25b95ce846da8e Mon Sep 17 00:00:00 2001
From: Igor Opaniuk <igor.opaniuk@toradex.com>
Date: Tue, 16 Jun 2020 22:20:09 +0300
Subject: apalis_imx6: boot env configuration updates

1. Drop legacy emmcboot wrapper from env.
2. Change the "boot try" order. Default one is: SD -> eMMC -> USB -> DHCP
3. Drop DFU defines

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
---
 include/configs/apalis_imx6.h | 29 +----------------------------
 1 file changed, 1 insertion(+), 28 deletions(-)

(limited to 'include')

diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h
index 6fc7c3982c6..38d0a6e2e90 100644
--- a/include/configs/apalis_imx6.h
+++ b/include/configs/apalis_imx6.h
@@ -93,9 +93,9 @@
 
 #ifndef CONFIG_SPL_BUILD
 #define BOOT_TARGET_DEVICES(func) \
-	func(MMC, mmc, 0) \
 	func(MMC, mmc, 1) \
 	func(MMC, mmc, 2) \
+	func(MMC, mmc, 0) \
 	func(USB, usb, 0) \
 	func(DHCP, dhcp, na)
 #include <config_distro_bootcmd.h>
@@ -105,14 +105,6 @@
 #define BOOTENV
 #endif /* CONFIG_SPL_BUILD */
 
-#define DFU_ALT_EMMC_INFO \
-	"u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
-	"boot part 0 1;" \
-	"rootfs part 0 2;" \
-	"zImage fat 0 1;" \
-	"imx6q-apalis-eval.dtb fat 0 1;" \
-	"imx6q-apalis-cam-eval.dtb fat 0 1"
-
 #define UBOOT_UPDATE \
 	"uboot_hwpart=1\0" \
 	"uboot_blk=8a\0" \
@@ -124,23 +116,6 @@
 	"update_spl=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
 		"mmc write ${loadaddr} ${uboot_spl_blk} ${blkcnt}\0"
 
-#define EMMC_BOOTCMD \
-	"set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} " \
-		"ro,noatime rootfstype=ext4 rootwait\0" \
-	"emmcboot=run setup; run emmcfinduuid; run set_emmcargs; " \
-		"setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
-		"${vidargs}; echo Booting from internal eMMC chip...; "	\
-		"run emmcdtbload; load mmc ${emmcdev}:${emmcbootpart} " \
-		"${kernel_addr_r} ${boot_file} && run fdt_fixup && " \
-		"bootz ${kernel_addr_r} ${dtbparam}\0" \
-	"emmcbootpart=1\0" \
-	"emmcdev=0\0" \
-	"emmcdtbload=setenv dtbparam; load mmc ${emmcdev}:${emmcbootpart} " \
-		"${fdt_addr_r} ${fdt_file} && " \
-		"setenv dtbparam \" - ${fdt_addr_r}\" && true\0" \
-	"emmcfinduuid=part uuid mmc ${mmcdev}:${emmcrootpart} uuid\0" \
-	"emmcrootpart=2\0"
-
 #define MEM_LAYOUT_ENV_SETTINGS \
 	"bootm_size=0x20000000\0" \
 	"fdt_addr_r=0x12100000\0" \
@@ -174,8 +149,6 @@
 	"boot_file=zImage\0" \
 	"console=ttymxc0\0" \
 	"defargs=enable_wait_mode=off vmalloc=400M\0" \
-	"dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
-	EMMC_BOOTCMD \
 	"fdt_file=" FDT_FILE "\0" \
 	"fdt_fixup=;\0" \
 	MEM_LAYOUT_ENV_SETTINGS \
-- 
cgit v1.3.1


From a17930a36c92ad2adc06b583ccd9b7af6c626432 Mon Sep 17 00:00:00 2001
From: Igor Opaniuk <igor.opaniuk@toradex.com>
Date: Tue, 16 Jun 2020 22:20:10 +0300
Subject: colibri_imx7: boot env configuration updates

1. Drop legacy emmcboot wrapper from env.
2. Change the "boot try" order. Default one is: SD -> eMMC -> USB -> DHCP
3. Drop DFU defines

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
---
 include/configs/colibri_imx7.h | 24 +-----------------------
 1 file changed, 1 insertion(+), 23 deletions(-)

(limited to 'include')

diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h
index b3f660b6fa2..1afa9373a16 100644
--- a/include/configs/colibri_imx7.h
+++ b/include/configs/colibri_imx7.h
@@ -88,23 +88,6 @@
 		"mmc read ${android_fdt_addr} ${env_start} ${env_size}; " \
 		"bootm ${loadaddr} ${loadaddr} ${android_fdt_addr}\0 "
 
-#define EMMC_BOOTCMD \
-	"set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} ro " \
-		"rootfstype=ext4 rootwait\0" \
-	"emmcboot=run setup; run emmcfinduuid; run set_emmcargs; " \
-		"setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
-		"${vidargs}; echo Booting from internal eMMC chip...; " \
-		"run m4boot && " \
-		"load mmc ${emmcdev}:${emmcbootpart} ${fdt_addr_r} " \
-		"${soc}-colibri-emmc-${fdt_board}.dtb && " \
-		"load mmc ${emmcdev}:${emmcbootpart} ${kernel_addr_r} " \
-		"${boot_file} && run fdt_fixup && " \
-		"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
-	"emmcbootpart=1\0" \
-	"emmcdev=0\0" \
-	"emmcfinduuid=part uuid mmc ${emmcdev}:${emmcrootpart} uuid\0" \
-	"emmcrootpart=2\0"
-
 #define MEM_LAYOUT_ENV_SETTINGS \
 	"bootm_size=0x10000000\0" \
 	"fdt_addr_r=0x82000000\0" \
@@ -144,7 +127,6 @@
 	"setenv fdtfile ${soc}-colibri-emmc-${fdt_board}.dtb && run distro_bootcmd;"
 #define MODULE_EXTRA_ENV_SETTINGS \
 	"variant=-emmc\0" \
-	EMMC_BOOTCMD \
 	EMMC_ANDROID_BOOTCMD
 #endif
 
@@ -155,8 +137,8 @@
 	func(DHCP, dhcp, na)
 #elif defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC)
 #define BOOT_TARGET_DEVICES(func) \
-	func(MMC, mmc, 0) \
 	func(MMC, mmc, 1) \
+	func(MMC, mmc, 0) \
 	func(USB, usb, 0) \
 	func(DHCP, dhcp, na)
 #endif
@@ -239,10 +221,6 @@
 
 #define CONFIG_USBD_HS
 
-/* USB Device Firmware Update support */
-#define CONFIG_SYS_DFU_DATA_BUF_SIZE	SZ_16M
-#define DFU_DEFAULT_POLL_TIMEOUT	300
-
 #if defined(CONFIG_VIDEO) || defined(CONFIG_DM_VIDEO)
 #define CONFIG_VIDEO_MXS
 #define CONFIG_VIDEO_LOGO
-- 
cgit v1.3.1


From 0e15165bc4e03e48937baf63303b8812f5cdf6ca Mon Sep 17 00:00:00 2001
From: Igor Opaniuk <igor.opaniuk@toradex.com>
Date: Tue, 16 Jun 2020 22:20:11 +0300
Subject: colibri_imx6: boot env configuration updates

1. Drop legacy emmcboot wrapper from env.
2. Change the "boot try" order. Default one is: SD -> eMMC -> USB -> DHCP
3. Drop DFU defines

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
---
 include/configs/colibri_imx6.h | 29 +----------------------------
 1 file changed, 1 insertion(+), 28 deletions(-)

(limited to 'include')

diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
index 0a52a701c62..f5f86f083c6 100644
--- a/include/configs/colibri_imx6.h
+++ b/include/configs/colibri_imx6.h
@@ -83,6 +83,7 @@
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 0) \
 	func(MMC, mmc, 1) \
+	func(MMC, mmc, 0) \
 	func(USB, usb, 0) \
 	func(DHCP, dhcp, na)
 #include <config_distro_bootcmd.h>
@@ -92,14 +93,6 @@
 #define BOOTENV
 #endif /* CONFIG_SPL_BUILD */
 
-#define DFU_ALT_EMMC_INFO \
-	"u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
-	"boot part 0 1;" \
-	"rootfs part 0 2;" \
-	"zImage fat 0 1;" \
-	"imx6dl-colibri-eval-v3.dtb fat 0 1;" \
-	"imx6dl-colibri-cam-eval-v3.dtb fat 0 1"
-
 #define UBOOT_UPDATE \
 	"uboot_hwpart=1\0" \
 	"uboot_blk=8a\0" \
@@ -111,24 +104,6 @@
 	"update_spl=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
 		"mmc write ${loadaddr} ${uboot_spl_blk} ${blkcnt}\0"
 
-#define EMMC_BOOTCMD \
-	"set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} "\
-		"rw,noatime rootfstype=ext4 " \
-		"rootwait\0" \
-	"emmcboot=run setup; run emmcfinduuid; run set_emmcargs; " \
-		"setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
-		"${vidargs}; echo Booting from internal eMMC chip...; "	\
-		"run emmcdtbload; load mmc ${emmcdev}:${emmcbootpart} " \
-		"${kernel_addr_r} ${boot_file} && run fdt_fixup && " \
-		"bootz ${kernel_addr_r} ${dtbparam}\0" \
-	"emmcbootpart=1\0" \
-	"emmcdev=0\0" \
-	"emmcdtbload=setenv dtbparam; load mmc ${emmcdev}:${emmcbootpart} " \
-		"${fdt_addr_r} ${fdt_file} && " \
-		"setenv dtbparam \" - ${fdt_addr_r}\" && true\0" \
-	"emmcfinduuid=part uuid mmc ${mmcdev}:${emmcrootpart} uuid\0" \
-	"emmcrootpart=2\0"
-
 #define MEM_LAYOUT_ENV_SETTINGS \
 	"bootm_size=0x10000000\0" \
 	"fdt_addr_r=0x12100000\0" \
@@ -157,8 +132,6 @@
 	"boot_file=zImage\0" \
 	"console=ttymxc0\0" \
 	"defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
-	"dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
-	EMMC_BOOTCMD \
 	"fdt_file=" FDT_FILE "\0" \
 	"fdt_fixup=;\0" \
 	MEM_LAYOUT_ENV_SETTINGS \
-- 
cgit v1.3.1


From a1f79c2170ba425972d626cc6351bcdef2ca9d08 Mon Sep 17 00:00:00 2001
From: Heinrich Schuchardt <xypron.glpk@gmx.de>
Date: Mon, 8 Jun 2020 01:43:47 +0200
Subject: arm: wandboard: move CONFIG_MXC_UART to defconfig

For using a debug UART on the Wandboard CONFIG_MXC_UART=y must be set in
the .config file.

To avoid duplicate definitions move the setting from
include/configs/wandboard.h to configs/wandboard_defconfig.

Document the debug UART settings in the README.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
---
 board/wandboard/README      | 10 ++++++++++
 configs/wandboard_defconfig |  1 +
 include/configs/wandboard.h |  1 -
 3 files changed, 11 insertions(+), 1 deletion(-)

(limited to 'include')

diff --git a/board/wandboard/README b/board/wandboard/README
index f84f2053375..2d514a72149 100644
--- a/board/wandboard/README
+++ b/board/wandboard/README
@@ -37,3 +37,13 @@ as the mx6 processor)
 - Connect the serial cable to the host PC
 
 - Power up the board and U-Boot messages will appear in the serial console.
+
+Debug UART
+----------
+
+The following settings provide a debug UART for the Wandboard:
+
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_MXC=y
+CONFIG_DEBUG_UART_BASE=0x02020000
+CONFIG_DEBUG_UART_CLOCK=80000000
diff --git a/configs/wandboard_defconfig b/configs/wandboard_defconfig
index 733b4e82edf..8febe56f2e6 100644
--- a/configs/wandboard_defconfig
+++ b/configs/wandboard_defconfig
@@ -67,6 +67,7 @@ CONFIG_PINCTRL_IMX6=y
 CONFIG_DM_PMIC=y
 CONFIG_DM_PMIC_PFUZE100=y
 CONFIG_DM_SCSI=y
+CONFIG_MXC_UART=y
 CONFIG_DM_THERMAL=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index 2b0576e1e6e..c798ca64bf1 100644
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -17,7 +17,6 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)
 
-#define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE		UART1_BASE
 
 /* SATA Configs */
-- 
cgit v1.3.1