From 35d460fbc8ced954fe23812e706d3eebc1dd2b4d Mon Sep 17 00:00:00 2001 From: Przemyslaw Marczak Date: Tue, 27 Oct 2015 13:07:58 +0100 Subject: dm: pmic: add s2mps11 PMIC I/O driver This driver allows I/O operations on the Samsung S2MPS11 PMIC, which provides lots of LDO/BUCK outputs. To enable it, update defconfig with: - CONFIG_PMIC_S2MPS11 and additional, if were not defined: - CONFIG_CMD_PMIC - CONFIG_ERRNO_STR The binding info: doc/device-tree-bindings/pmic/s2mps11.txt Signed-off-by: Przemyslaw Marczak Reviewed-by: Simon Glass Tested-by: Anand Moon Signed-off-by: Minkyu Kang --- include/power/s2mps11.h | 109 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 109 insertions(+) create mode 100644 include/power/s2mps11.h (limited to 'include') diff --git a/include/power/s2mps11.h b/include/power/s2mps11.h new file mode 100644 index 00000000000..5da47198a4b --- /dev/null +++ b/include/power/s2mps11.h @@ -0,0 +1,109 @@ +#ifndef __S2MPS11__H__ +#define __S2MPS11__H__ + +enum s2mps11_reg { + S2MPS11_REG_ID = 0, + S2MPS11_REG_INT1, + S2MPS11_REG_INT2, + S2MPS11_REG_INT3, + S2MPS11_REG_INT1M, + S2MPS11_REG_INT2M, + S2MPS11_REG_INT3M, + S2MPS11_REG_STATUS1, + S2MPS11_REG_STATUS2, + S2MPS11_REG_OFFSRC, + S2MPS11_REG_PWRONSRC, + S2MPS11_REG_RTC_CTRL, + S2MPS11_REG_CTRL1, + S2MPS11_REG_ETC_TEST, + S2MPS11_REG_RSVD3, + S2MPS11_REG_BU_CHG, + S2MPS11_REG_RAMP, + S2MPS11_REG_RAMP_BUCK, + S2MPS11_REG_LDO1_8, + S2MPS11_REG_LDO9_16, + S2MPS11_REG_LDO17_24, + S2MPS11_REG_LDO25_32, + S2MPS11_REG_LDO33_38, + S2MPS11_REG_LDO1_8_OVC, + S2MPS11_REG_LDO9_16_OVC, + S2MPS11_REG_LDO17_24_OVC, + S2MPS11_REG_LDO25_32_OVC, + S2MPS11_REG_LDO33_38_OVC, + S2MPS11_REG_RESERVED1, + S2MPS11_REG_RESERVED2, + S2MPS11_REG_RESERVED3, + S2MPS11_REG_RESERVED4, + S2MPS11_REG_RESERVED5, + S2MPS11_REG_RESERVED6, + S2MPS11_REG_RESERVED7, + S2MPS11_REG_RESERVED8, + S2MPS11_REG_WDRSTEN_CTRL, + S2MPS11_REG_B1CTRL1, + S2MPS11_REG_B1CTRL2, + S2MPS11_REG_B2CTRL1, + S2MPS11_REG_B2CTRL2, + S2MPS11_REG_B3CTRL1, + S2MPS11_REG_B3CTRL2, + S2MPS11_REG_B4CTRL1, + S2MPS11_REG_B4CTRL2, + S2MPS11_REG_B5CTRL1, + S2MPS11_REG_BUCK5_SW, + S2MPS11_REG_B5CTRL2, + S2MPS11_REG_B5CTRL3, + S2MPS11_REG_B5CTRL4, + S2MPS11_REG_B5CTRL5, + S2MPS11_REG_B6CTRL1, + S2MPS11_REG_B6CTRL2, + S2MPS11_REG_B7CTRL1, + S2MPS11_REG_B7CTRL2, + S2MPS11_REG_B8CTRL1, + S2MPS11_REG_B8CTRL2, + S2MPS11_REG_B9CTRL1, + S2MPS11_REG_B9CTRL2, + S2MPS11_REG_B10CTRL1, + S2MPS11_REG_B10CTRL2, + S2MPS11_REG_L1CTRL, + S2MPS11_REG_L2CTRL, + S2MPS11_REG_L3CTRL, + S2MPS11_REG_L4CTRL, + S2MPS11_REG_L5CTRL, + S2MPS11_REG_L6CTRL, + S2MPS11_REG_L7CTRL, + S2MPS11_REG_L8CTRL, + S2MPS11_REG_L9CTRL, + S2MPS11_REG_L10CTRL, + S2MPS11_REG_L11CTRL, + S2MPS11_REG_L12CTRL, + S2MPS11_REG_L13CTRL, + S2MPS11_REG_L14CTRL, + S2MPS11_REG_L15CTRL, + S2MPS11_REG_L16CTRL, + S2MPS11_REG_L17CTRL, + S2MPS11_REG_L18CTRL, + S2MPS11_REG_L19CTRL, + S2MPS11_REG_L20CTRL, + S2MPS11_REG_L21CTRL, + S2MPS11_REG_L22CTRL, + S2MPS11_REG_L23CTRL, + S2MPS11_REG_L24CTRL, + S2MPS11_REG_L25CTRL, + S2MPS11_REG_L26CTRL, + S2MPS11_REG_L27CTRL, + S2MPS11_REG_L28CTRL, + S2MPS11_REG_L29CTRL, + S2MPS11_REG_L30CTRL, + S2MPS11_REG_L31CTRL, + S2MPS11_REG_L32CTRL, + S2MPS11_REG_L33CTRL, + S2MPS11_REG_L34CTRL, + S2MPS11_REG_L35CTRL, + S2MPS11_REG_L36CTRL, + S2MPS11_REG_L37CTRL, + S2MPS11_REG_L38CTRL, + S2MPS11_REG_COUNT, +}; + +#define S2MPS11_LDO26_ENABLE 0xec + +#endif -- cgit v1.2.3 From 7c816e24a4e980e2717e5c83090dec73bc4eac57 Mon Sep 17 00:00:00 2001 From: Przemyslaw Marczak Date: Tue, 27 Oct 2015 13:07:59 +0100 Subject: dm: regulator: add function device_get_supply_regulator() Some devices are supplied by configurable regulator's output. But there was no function for getting it. This commit adds function, that allows for getting the supply device by it's phandle. The returned regulator device can be used with regulator uclass's API. Signed-off-by: Przemyslaw Marczak Cc: Simon Glass Signed-off-by: Minkyu Kang --- include/power/regulator.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'include') diff --git a/include/power/regulator.h b/include/power/regulator.h index 1a51c3f07bc..63c0814fe83 100644 --- a/include/power/regulator.h +++ b/include/power/regulator.h @@ -419,4 +419,20 @@ int regulator_get_by_devname(const char *devname, struct udevice **devp); */ int regulator_get_by_platname(const char *platname, struct udevice **devp); +/** + * device_get_supply_regulator: returns the pointer to the supply regulator. + * Search by phandle, found in device's node. + * + * Note: Please pay attention to proper order of device bind sequence. + * The regulator device searched by the phandle, must be binded before + * this function call. + * + * @dev - device with supply phandle + * @supply_name - phandle name of regulator + * @devp - returned pointer to the supply device + * @return 0 on success or negative value of errno. + */ +int device_get_supply_regulator(struct udevice *dev, const char *supply_name, + struct udevice **devp); + #endif /* _INCLUDE_REGULATOR_H_ */ -- cgit v1.2.3 From 5decbf53006c8e2aed8e5506b3961810c1544b3c Mon Sep 17 00:00:00 2001 From: Przemyslaw Marczak Date: Tue, 27 Oct 2015 13:08:00 +0100 Subject: dm: adc: add simple ADC uclass implementation This commit adds: - new uclass id: UCLASS_ADC - new uclass driver: drivers/adc/adc-uclass.c The new uclass's API allows for ADC operation on: * single-channel with channel selection by a number * multti-channel with channel selection by bit mask ADC uclass's functions: * single-channel: - adc_start_channel() - start channel conversion - adc_channel_data() - get conversion data - adc_channel_single_shot() - start/get conversion data * multi-channel: - adc_start_channels() - start selected channels conversion - adc_channels_data() - get conversion data - adc_channels_single_shot() - start/get conversion data for channels selected by bit mask * general: - adc_stop() - stop the conversion - adc_vdd_value() - positive reference Voltage value with polarity [uV] - adc_vss_value() - negative reference Voltage value with polarity [uV] - adc_data_mask() - conversion data bit mask The device tree can provide below constraints/properties: - vdd-polarity-negative: if true: Vdd = vdd-microvolts * (-1) - vss-polarity-negative: if true: Vss = vss-microvolts * (-1) - vdd-supply: phandle to Vdd regulator's node - vss-supply: phandle to Vss regulator's node And optional, checked only if the above corresponding, doesn't exist: - vdd-microvolts: positive reference Voltage [uV] - vss-microvolts: negative reference Voltage [uV] Signed-off-by: Przemyslaw Marczak Cc: Simon Glass Signed-off-by: Minkyu Kang --- include/adc.h | 288 +++++++++++++++++++++++++++++++++++++++++++++++++ include/dm/uclass-id.h | 1 + 2 files changed, 289 insertions(+) create mode 100644 include/adc.h (limited to 'include') diff --git a/include/adc.h b/include/adc.h new file mode 100644 index 00000000000..4b140178498 --- /dev/null +++ b/include/adc.h @@ -0,0 +1,288 @@ +/* + * Copyright (C) 2015 Samsung Electronics + * Przemyslaw Marczak + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _ADC_H_ +#define _ADC_H_ + +/* ADC_CHANNEL() - ADC channel bit mask, to select only required channels */ +#define ADC_CHANNEL(x) (1 << x) + +/* The last possible selected channel with 32-bit mask */ +#define ADC_MAX_CHANNEL 31 + +/** + * adc_data_format: define the ADC output data format, can be useful when + * the device's input Voltage range is bipolar. + * - ADC_DATA_FORMAT_BIN - binary offset + * - ADC_DATA_FORMAT_2S - two's complement + * + * Note: Device's driver should fill the 'data_format' field of its uclass's + * platform data using one of the above data format types. + */ +enum adc_data_format { + ADC_DATA_FORMAT_BIN, + ADC_DATA_FORMAT_2S, +}; + +/** + * struct adc_channel - structure to hold channel conversion data. + * Useful to keep the result of a multi-channel conversion output. + * + * @id - channel id + * @data - channel conversion data + */ +struct adc_channel { + int id; + unsigned int data; +}; + +/** + * struct adc_uclass_platdata - basic ADC info + * + * Note: The positive/negative reference Voltage is only a name and it doesn't + * provide an information about the value polarity. It is possible, for both + * values to be a negative or positive. For this purpose the uclass's platform + * data provides a bool fields: 'vdd/vss_supply_is_negative'. This is useful, + * since the regulator API returns only a positive Voltage values. + * + * To get the reference Voltage values with polarity, use functions: + * - adc_vdd_value() + * - adc_vss_value() + * Those are useful for some cases of ADC's references, e.g.: + * * Vdd: +3.3V; Vss: -3.3V -> 6.6 Vdiff + * * Vdd: +3.3V; Vss: +0.3V -> 3.0 Vdiff + * * Vdd: +3.3V; Vss: 0.0V -> 3.3 Vdiff + * The last one is usually standard and doesn't require the fdt polarity info. + * + * For more informations read binding info: + * - doc/device-tree-bindings/adc/adc.txt + * + * @data_mask - conversion output data mask + * @data_timeout_us - single channel conversion timeout + * @multidata_timeout_us - multi channel conversion timeout + * @channel_mask - bit mask of available channels [0:31] + * @vdd_supply - positive reference Voltage supply (regulator) + * @vss_supply - negative reference Voltage supply (regulator) + * @vdd_polarity_negative - positive reference Voltage has negative polarity + * @vss_polarity_negative - negative reference Voltage has negative polarity + * @vdd_microvolts - positive reference Voltage value + * @vss_microvolts - negative reference Voltage value + */ +struct adc_uclass_platdata { + int data_format; + unsigned int data_mask; + unsigned int data_timeout_us; + unsigned int multidata_timeout_us; + unsigned int channel_mask; + struct udevice *vdd_supply; + struct udevice *vss_supply; + bool vdd_polarity_negative; + bool vss_polarity_negative; + int vdd_microvolts; + int vss_microvolts; +}; + +/** + * struct adc_ops - ADC device operations for single/multi-channel operation. + */ +struct adc_ops { + /** + * start_channel() - start conversion with its default parameters + * for the given channel number. + * + * @dev: ADC device to init + * @channel: analog channel number + * @return: 0 if OK, -ve on error + */ + int (*start_channel)(struct udevice *dev, int channel); + + /** + * start_channels() - start conversion with its default parameters + * for the channel numbers selected by the bit mask. + * + * This is optional, useful when the hardware supports multichannel + * conversion by the single software trigger. + * + * @dev: ADC device to init + * @channel_mask: bit mask of selected analog channels + * @return: 0 if OK, -ve on error + */ + int (*start_channels)(struct udevice *dev, unsigned int channel_mask); + + /** + * channel_data() - get conversion output data for the given channel. + * + * Note: The implementation of this function should only check, that + * the conversion data is available at the call time. If the hardware + * requires some delay to get the data, then this function should + * return with -EBUSY value. The ADC API will call it in a loop, + * until the data is available or the timeout expires. The maximum + * timeout for this operation is defined by the field 'data_timeout_us' + * in ADC uclasses platform data structure. + * + * @dev: ADC device to trigger + * @channel: selected analog channel number + * @data: returned pointer to selected channel's output data + * @return: 0 if OK, -EBUSY if busy, and other negative on error + */ + int (*channel_data)(struct udevice *dev, int channel, + unsigned int *data); + + /** + * channels_data() - get conversion data for the selected channels. + * + * This is optional, useful when multichannel conversion is supported + * by the hardware, by the single software trigger. + * + * For the proper implementation, please look at the 'Note' for the + * above method. The only difference is in used timeout value, which + * is defined by field 'multidata_timeout_us'. + * + * @dev: ADC device to trigger + * @channel_mask: bit mask of selected analog channels + * @channels: returned pointer to array of output data for channels + * selected by the given mask + * @return: 0 if OK, -ve on error + */ + int (*channels_data)(struct udevice *dev, unsigned int channel_mask, + struct adc_channel *channels); + + /** + * stop() - stop conversion of the given ADC device + * + * @dev: ADC device to stop + * @return: 0 if OK, -ve on error + */ + int (*stop)(struct udevice *dev); +}; + +/** + * adc_start_channel() - start conversion for given device/channel and exit. + * + * @dev: ADC device + * @channel: analog channel number + * @return: 0 if OK, -ve on error + */ +int adc_start_channel(struct udevice *dev, int channel); + +/** + * adc_start_channels() - start conversion for given device/channels and exit. + * + * Note: + * To use this function, device must implement method: start_channels(). + * + * @dev: ADC device to start + * @channel_mask: channel selection - a bit mask + * @channel_mask: bit mask of analog channels + * @return: 0 if OK, -ve on error + */ +int adc_start_channels(struct udevice *dev, unsigned int channel_mask); + +/** + * adc_channel_data() - get conversion data for the given device channel number. + * + * @dev: ADC device to read + * @channel: analog channel number + * @data: pointer to returned channel's data + * @return: 0 if OK, -ve on error + */ +int adc_channel_data(struct udevice *dev, int channel, unsigned int *data); + +/** + * adc_channels_data() - get conversion data for the channels selected by mask + * + * Note: + * To use this function, device must implement methods: + * - start_channels() + * - channels_data() + * + * @dev: ADC device to read + * @channel_mask: channel selection - a bit mask + * @channels: pointer to structure array of returned data for each channel + * @return: 0 if OK, -ve on error + */ +int adc_channels_data(struct udevice *dev, unsigned int channel_mask, + struct adc_channel *channels); + +/** + * adc_data_mask() - get data mask (ADC resolution bitmask) for given ADC device + * + * This can be used if adc uclass platform data is filled. + * + * @dev: ADC device to check + * @data_mask: pointer to the returned data bitmask + * @return: 0 if OK, -ve on error + */ +int adc_data_mask(struct udevice *dev, unsigned int *data_mask); + +/** + * adc_channel_single_shot() - get output data of conversion for the ADC + * device's channel. This function searches for the device with the given name, + * starts the given channel conversion and returns the output data. + * + * Note: To use this function, device must implement metods: + * - start_channel() + * - channel_data() + * + * @name: device's name to search + * @channel: device's input channel to init + * @data: pointer to conversion output data + * @return: 0 if OK, -ve on error + */ +int adc_channel_single_shot(const char *name, int channel, unsigned int *data); + +/** + * adc_channels_single_shot() - get ADC conversion output data for the selected + * device's channels. This function searches for the device by the given name, + * starts the selected channels conversion and returns the output data as array + * of type 'struct adc_channel'. + * + * Note: This function can be used if device implements one of ADC's single + * or multi-channel operation API. If multi-channel operation is not supported, + * then each selected channel is triggered by the sequence start/data in a loop. + * + * @name: device's name to search + * @channel_mask: channel selection - a bit mask + * @channels: pointer to conversion output data for the selected channels + * @return: 0 if OK, -ve on error + */ +int adc_channels_single_shot(const char *name, unsigned int channel_mask, + struct adc_channel *channels); + +/** + * adc_vdd_value() - get the ADC device's positive reference Voltage value + * + * Note: Depending on bool value 'vdd_supply_is_negative' of platform data, + * the returned uV value can be negative, and it's not an error. + * + * @dev: ADC device to check + * @uV: Voltage value with polarization sign (uV) + * @return: 0 on success or -ve on error +*/ +int adc_vdd_value(struct udevice *dev, int *uV); + +/** + * adc_vss_value() - get the ADC device's negative reference Voltage value + * + * Note: Depending on bool value 'vdd_supply_is_negative' of platform data, + * the returned uV value can be negative, and it's not an error. + * + * @dev: ADC device to check + * @uV: Voltage value with polarization sign (uV) + * @return: 0 on success or -ve on error +*/ +int adc_vss_value(struct udevice *dev, int *uV); + +/** + * adc_stop() - stop operation for given ADC device. + * + * @dev: ADC device to stop + * @return: 0 if OK, -ve on error + */ +int adc_stop(struct udevice *dev); + +#endif diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h index 886a44c134b..d0cf4ce6a0d 100644 --- a/include/dm/uclass-id.h +++ b/include/dm/uclass-id.h @@ -25,6 +25,7 @@ enum uclass_id { UCLASS_SIMPLE_BUS, /* bus with child devices */ /* U-Boot uclasses start here - in alphabetical order */ + UCLASS_ADC, /* Analog-to-digital converter */ UCLASS_CLK, /* Clock source, e.g. used by peripherals */ UCLASS_CPU, /* CPU, typically part of an SoC */ UCLASS_CROS_EC, /* Chrome OS EC */ -- cgit v1.2.3 From 1611c8cbcfe2ee50cc5e96f3a5c666c99d235107 Mon Sep 17 00:00:00 2001 From: Przemyslaw Marczak Date: Tue, 27 Oct 2015 13:08:05 +0100 Subject: exynos5-dt-types: add board detection for Odroid XU3/XU3L/XU4. This commit adds additional file with implementation of board detection code for Odroid-XU3/XU4. The detection depends on compatible found in fdt: - "samsung,exynos5" - uses Exynos5 generic code - "samsung,odroidxu3" - try detect XU3 revision There are few revisions of Odroid XU3/XU4, each can be detected by checking the value of channel 9 of built-in ADC: Rev ADC Board 0.1 0 XU3 0.1 0.2 372 XU3 0.2 | XU3L - no DISPLAYPORT 0.3 1280 XU4 0.1 The detection code depends on the ADC+10% value. Implementation of functions: - set_board_type() - read ADC and set type - get_board_rev() - returns board revision: 1..3 - get_board_type() - returns board type string Additional functions with return values of bool: - board_is_generic() - true if found compatible "samsung,exynos5" but not "samsung,odroidxu3" - board_is_odroidxu3() - true if found compatible "samsung,odroidxu3" and one of XU3 revision. - board_is_odroidxu4() - true if found compatible "samsung,odroidxu3" and XU4 revision. After I2C controller init, the get_board_type() can check if the XU3 board is a "Lite" variant, by probing chip 0x40 on I2C0 (INA231 - exists only on non-lite). This is useful for setting fdt file name at misc_init_r(). Enabled configs: - CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - CONFIG_ODROID_REV_AIN - CONFIG_REVISION_TAG - CONFIG_BOARD_TYPES Signed-off-by: Przemyslaw Marczak Cc: Minkyu Kang Cc: Simon Glass Tested-by: Anand Moon Signed-off-by: Minkyu Kang --- include/configs/odroid_xu3.h | 12 ++++++++++++ include/samsung/exynos5-dt-types.h | 27 +++++++++++++++++++++++++++ 2 files changed, 39 insertions(+) create mode 100644 include/samsung/exynos5-dt-types.h (limited to 'include') diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h index 3c701587bfb..648e48bcf4b 100644 --- a/include/configs/odroid_xu3.h +++ b/include/configs/odroid_xu3.h @@ -94,6 +94,8 @@ "boot.scr fat 0 1;" \ "boot.cmd fat 0 1;" \ "exynos5422-odroidxu3.dtb fat 0 1;" \ + "exynos5422-odroidxu3-lite.dtb fat 0 1;" \ + "exynos5422-odroidxu4.dtb fat 0 1;" \ "boot part 0 1;" \ "root part 0 2\0" @@ -113,9 +115,19 @@ /* Enable: board/samsung/common/misc.c to use set_dfu_alt_info() */ #define CONFIG_MISC_COMMON +#define CONFIG_MISC_INIT_R #define CONFIG_SET_DFU_ALT_INFO #define CONFIG_SET_DFU_ALT_BUF_LEN (SZ_1K) +/* Set soc_rev, soc_id, board_rev, boardname, fdtfile */ +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +#define CONFIG_ODROID_REV_AIN 9 +#define CONFIG_REVISION_TAG +#define CONFIG_BOARD_TYPES + +#undef CONFIG_SYS_BOARD +#define CONFIG_SYS_BOARD "odroid" + /* Define new extra env settings, including DFU settings */ #undef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/samsung/exynos5-dt-types.h b/include/samsung/exynos5-dt-types.h new file mode 100644 index 00000000000..479e2e793dc --- /dev/null +++ b/include/samsung/exynos5-dt-types.h @@ -0,0 +1,27 @@ +#ifndef _EXYNOS5_DT_H_ +#define _EXYNOS5_DT_H_ + +enum { + EXYNOS5_BOARD_GENERIC, + + EXYNOS5_BOARD_ODROID_XU3, + EXYNOS5_BOARD_ODROID_XU3_REV01, + EXYNOS5_BOARD_ODROID_XU3_REV02, + EXYNOS5_BOARD_ODROID_XU4_REV01, + EXYNOS5_BOARD_ODROID_UNKNOWN, + + EXYNOS5_BOARD_COUNT, +}; + +struct odroid_rev_info { + int board_type; + int board_rev; + int adc_val; + const char *name; +}; + +bool board_is_generic(void); +bool board_is_odroidxu3(void); +bool board_is_odroidxu4(void); + +#endif -- cgit v1.2.3 From c48cb7ebfb42d997a3f4317a412992f403c717aa Mon Sep 17 00:00:00 2001 From: Przemyslaw Marczak Date: Tue, 27 Oct 2015 13:08:07 +0100 Subject: sandbox: add ADC unit tests This commit adds unit tests for ADC uclass's methods using sandbox ADC. Testing proper ADC binding: - dm_test_adc_bind() - device binding - dm_test_adc_wrong_channel_selection() - checking wrong channel selection Testing ADC supply operations: - dm_test_adc_supply(): - Vdd/Vss values validating - Vdd regulator updated value validating - Vdd regulator's auto enable state validating Testing ADC operations results: - dm_test_adc_single_channel_conversion() - single channel start/data - dm_test_adc_single_channel_shot() - single channel shot - dm_test_adc_multi_channel_conversion() - multi channel start/data - dm_test_adc_multi_channel_shot() - multi channel single shot Signed-off-by: Przemyslaw Marczak Cc: Simon Glass Signed-off-by: Minkyu Kang --- include/power/sandbox_pmic.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/power/sandbox_pmic.h b/include/power/sandbox_pmic.h index 85476749714..7fdbfb9fc6f 100644 --- a/include/power/sandbox_pmic.h +++ b/include/power/sandbox_pmic.h @@ -126,6 +126,10 @@ enum { #define SANDBOX_BUCK1_AUTOSET_EXPECTED_UA 200000 #define SANDBOX_BUCK1_AUTOSET_EXPECTED_ENABLE true +/* BUCK2: for testing sandbox ADC's supply */ +#define SANDBOX_BUCK2_INITIAL_EXPECTED_UV 3000000 +#define SANDBOX_BUCK2_SET_UV 3300000 + /* LDO1/2 for testing regulator_list_autoset() */ #define SANDBOX_LDO1_AUTOSET_EXPECTED_UV 1800000 #define SANDBOX_LDO1_AUTOSET_EXPECTED_UA 100000 -- cgit v1.2.3 From 58cb44cf6623faeebd9b04ac44cf11d2eb39ea36 Mon Sep 17 00:00:00 2001 From: Przemyslaw Marczak Date: Wed, 4 Nov 2015 18:30:09 +0100 Subject: sandbox: adc: Add missing header file Commit: sandbox: add ADC driver adds the driver without its main header file. It causes build brake for sandbox_defonfig. This commit adds a missing header: - include/sandbox-adc.h Signed-off-by: Przemyslaw Marczak Cc: Minkyu Kang Cc: Simon Glass Signed-off-by: Minkyu Kang --- include/sandbox-adc.h | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 include/sandbox-adc.h (limited to 'include') diff --git a/include/sandbox-adc.h b/include/sandbox-adc.h new file mode 100644 index 00000000000..79ff01c6ab2 --- /dev/null +++ b/include/sandbox-adc.h @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2015 Samsung Electronics + * Przemyslaw Marczak + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SANDBOX_ADC_H_ +#define _SANDBOX_ADC_H_ + +#define SANDBOX_ADC_DEVNAME "adc@0" +#define SANDBOX_ADC_DATA_MASK 0xffff /* 16-bits resolution */ +#define SANDBOX_ADC_CHANNELS 4 +#define SANDBOX_ADC_CHANNEL0_DATA 0x0 +#define SANDBOX_ADC_CHANNEL1_DATA 0x1000 +#define SANDBOX_ADC_CHANNEL2_DATA 0x2000 +#define SANDBOX_ADC_CHANNEL3_DATA 0x3000 + +enum sandbox_adc_mode { + SANDBOX_ADC_MODE_SINGLE_CHANNEL = 0, + SANDBOX_ADC_MODE_MULTI_CHANNEL, +}; + +enum sandbox_adc_status { + SANDBOX_ADC_INACTIVE = 0, + SANDBOX_ADC_ACTIVE, +}; + +#define SANDBOX_ADC_VSS_VALUE 0 + +#endif -- cgit v1.2.3