From 6c71a8fec95a9e0f90fbc47469c389c6f35d96bc Mon Sep 17 00:00:00 2001 From: Naveen Krishna CH Date: Thu, 4 Feb 2010 14:17:38 +0900 Subject: S5PC100: Moves the Macros to a common header file The get_pll_clk(int) API returns the PLL frequency based on the (int) argument which is defined locally in clock.c Moving that #define to common header file (clk.h) would be helpful when using the API from other files. Signed-off-by: Naveen Krishna Ch Signed-off-by: Minkyu Kang --- include/asm-arm/arch-s5pc1xx/clk.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include') diff --git a/include/asm-arm/arch-s5pc1xx/clk.h b/include/asm-arm/arch-s5pc1xx/clk.h index f1aa44fd25f..3e59abe78c6 100644 --- a/include/asm-arm/arch-s5pc1xx/clk.h +++ b/include/asm-arm/arch-s5pc1xx/clk.h @@ -23,6 +23,12 @@ #ifndef __ASM_ARM_ARCH_CLK_H_ #define __ASM_ARM_ARCH_CLK_H_ +#define APLL 0 +#define MPLL 1 +#define EPLL 2 +#define HPLL 3 +#define VPLL 4 + void s5pc1xx_clock_init(void); extern unsigned long (*get_pll_clk)(int pllreg); -- cgit v1.3.1 From ab693e9c4c06b42d1746a0d7a03541968fb55bb9 Mon Sep 17 00:00:00 2001 From: Minkyu Kang Date: Fri, 12 Feb 2010 18:17:52 +0900 Subject: s5pc1xx: support the GPIO interface This patch adds support the GPIO interface Signed-off-by: Minkyu Kang --- cpu/arm_cortexa8/s5pc1xx/Makefile | 1 + cpu/arm_cortexa8/s5pc1xx/gpio.c | 143 ++++++++++++++++++++++++++++++++++++ include/asm-arm/arch-s5pc1xx/gpio.h | 29 ++++++++ 3 files changed, 173 insertions(+) create mode 100644 cpu/arm_cortexa8/s5pc1xx/gpio.c (limited to 'include') diff --git a/cpu/arm_cortexa8/s5pc1xx/Makefile b/cpu/arm_cortexa8/s5pc1xx/Makefile index 4f922e686af..7290c2f5223 100644 --- a/cpu/arm_cortexa8/s5pc1xx/Makefile +++ b/cpu/arm_cortexa8/s5pc1xx/Makefile @@ -33,6 +33,7 @@ SOBJS += reset.o COBJS += clock.o COBJS += cpu_info.o +COBJS += gpio.o COBJS += timer.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/cpu/arm_cortexa8/s5pc1xx/gpio.c b/cpu/arm_cortexa8/s5pc1xx/gpio.c new file mode 100644 index 00000000000..a97244bf30e --- /dev/null +++ b/cpu/arm_cortexa8/s5pc1xx/gpio.c @@ -0,0 +1,143 @@ +/* + * (C) Copyright 2009 Samsung Electronics + * Minkyu Kang + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#define CON_MASK(x) (0xf << ((x) << 2)) +#define CON_SFR(x, v) ((v) << ((x) << 2)) + +#define DAT_MASK(x) (0x1 << (x)) +#define DAT_SET(x) (0x1 << (x)) + +#define PULL_MASK(x) (0x3 << ((x) << 1)) +#define PULL_MODE(x, v) ((v) << ((x) << 1)) + +#define DRV_MASK(x) (0x3 << ((x) << 1)) +#define DRV_SET(x, m) ((m) << ((x) << 1)) +#define RATE_MASK(x) (0x1 << (x + 16)) +#define RATE_SET(x) (0x1 << (x + 16)) + +void gpio_cfg_pin(struct s5pc1xx_gpio_bank *bank, int gpio, int cfg) +{ + unsigned int value; + + value = readl(&bank->con); + value &= ~CON_MASK(gpio); + value |= CON_SFR(gpio, cfg); + writel(value, &bank->con); +} + +void gpio_direction_output(struct s5pc1xx_gpio_bank *bank, int gpio, int en) +{ + unsigned int value; + + gpio_cfg_pin(bank, gpio, GPIO_OUTPUT); + + value = readl(&bank->dat); + value &= ~DAT_MASK(gpio); + if (en) + value |= DAT_SET(gpio); + writel(value, &bank->dat); +} + +void gpio_direction_input(struct s5pc1xx_gpio_bank *bank, int gpio) +{ + gpio_cfg_pin(bank, gpio, GPIO_INPUT); +} + +void gpio_set_value(struct s5pc1xx_gpio_bank *bank, int gpio, int en) +{ + unsigned int value; + + value = readl(&bank->dat); + value &= ~DAT_MASK(gpio); + if (en) + value |= DAT_SET(gpio); + writel(value, &bank->dat); +} + +unsigned int gpio_get_value(struct s5pc1xx_gpio_bank *bank, int gpio) +{ + unsigned int value; + + value = readl(&bank->dat); + return !!(value & DAT_MASK(gpio)); +} + +void gpio_set_pull(struct s5pc1xx_gpio_bank *bank, int gpio, int mode) +{ + unsigned int value; + + value = readl(&bank->pull); + value &= ~PULL_MASK(gpio); + + switch (mode) { + case GPIO_PULL_DOWN: + case GPIO_PULL_UP: + value |= PULL_MODE(gpio, mode); + break; + default: + return; + } + + writel(value, &bank->pull); +} + +void gpio_set_drv(struct s5pc1xx_gpio_bank *bank, int gpio, int mode) +{ + unsigned int value; + + value = readl(&bank->drv); + value &= ~DRV_MASK(gpio); + + switch (mode) { + case GPIO_DRV_1X: + case GPIO_DRV_2X: + case GPIO_DRV_3X: + case GPIO_DRV_4X: + value |= DRV_SET(gpio, mode); + break; + default: + return; + } + + writel(value, &bank->drv); +} + +void gpio_set_rate(struct s5pc1xx_gpio_bank *bank, int gpio, int mode) +{ + unsigned int value; + + value = readl(&bank->drv); + value &= ~RATE_MASK(gpio); + + switch (mode) { + case GPIO_DRV_FAST: + case GPIO_DRV_SLOW: + value |= RATE_SET(gpio); + break; + default: + return; + } + + writel(value, &bank->drv); +} diff --git a/include/asm-arm/arch-s5pc1xx/gpio.h b/include/asm-arm/arch-s5pc1xx/gpio.h index afbc7ea5ae5..8e4bb863f9c 100644 --- a/include/asm-arm/arch-s5pc1xx/gpio.h +++ b/include/asm-arm/arch-s5pc1xx/gpio.h @@ -124,6 +124,35 @@ struct s5pc110_gpio { struct s5pc1xx_gpio_bank gpio_h2; struct s5pc1xx_gpio_bank gpio_h3; }; + +/* functions */ +void gpio_cfg_pin(struct s5pc1xx_gpio_bank *bank, int gpio, int cfg); +void gpio_direction_output(struct s5pc1xx_gpio_bank *bank, int gpio, int en); +void gpio_direction_input(struct s5pc1xx_gpio_bank *bank, int gpio); +void gpio_set_value(struct s5pc1xx_gpio_bank *bank, int gpio, int en); +unsigned int gpio_get_value(struct s5pc1xx_gpio_bank *bank, int gpio); +void gpio_set_pull(struct s5pc1xx_gpio_bank *bank, int gpio, int mode); +void gpio_set_drv(struct s5pc1xx_gpio_bank *bank, int gpio, int mode); +void gpio_set_rate(struct s5pc1xx_gpio_bank *bank, int gpio, int mode); #endif +/* Pin configurations */ +#define GPIO_INPUT 0x0 +#define GPIO_OUTPUT 0x1 +#define GPIO_IRQ 0xf +#define GPIO_FUNC(x) (x) + +/* Pull mode */ +#define GPIO_PULL_NONE 0x0 +#define GPIO_PULL_DOWN 0x1 +#define GPIO_PULL_UP 0x2 + +/* Drive Strength level */ +#define GPIO_DRV_1X 0x0 +#define GPIO_DRV_2X 0x1 +#define GPIO_DRV_3X 0x2 +#define GPIO_DRV_4X 0x3 +#define GPIO_DRV_FAST 0x0 +#define GPIO_DRV_SLOW 0x1 + #endif -- cgit v1.3.1 From a28bec89ccc17b56a50d841c8f0778e927434d1c Mon Sep 17 00:00:00 2001 From: Naveen Krishna CH Date: Fri, 5 Mar 2010 17:15:13 +0900 Subject: S5PC100: Memory SubSystem Header file, register description(SROMC). Memory subsystem of S5PC100 handles SROM, SRAM, OneDRAM, OneNand, NAND Flash, DDRs. smc.h is a common place for the register description of Memory subsystem of S5PC100. Note: Only SROM related registers are descibed now. Signed-off-by: Naveen Krishna Ch Signed-off-by: Minkyu Kang --- include/asm-arm/arch-s5pc1xx/smc.h | 50 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+) create mode 100644 include/asm-arm/arch-s5pc1xx/smc.h (limited to 'include') diff --git a/include/asm-arm/arch-s5pc1xx/smc.h b/include/asm-arm/arch-s5pc1xx/smc.h new file mode 100644 index 00000000000..e1a53995ab0 --- /dev/null +++ b/include/asm-arm/arch-s5pc1xx/smc.h @@ -0,0 +1,50 @@ +/* + * (C) Copyright 2010 Samsung Electronics + * Naveen Krishna Ch + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Note: This file contains the register description for Memory subsystem + * (SROM, NAND Flash, OneNand, DDR, OneDRAM) on S5PC1XX. + * + * Only SROMC is defined as of now + */ + +#ifndef __ASM_ARCH_SMC_H_ +#define __ASM_ARCH_SMC_H_ + +#define SMC_DATA16_WIDTH(x) (1<<((x*4)+0)) +#define SMC_BYTE_ADDR_MODE(x) (1<<((x*4)+1)) /* 0-> Half-word base address*/ + /* 1-> Byte base address*/ +#define SMC_WAIT_ENABLE(x) (1<<((x*4)+2)) +#define SMC_BYTE_ENABLE(x) (1<<((x*4)+3)) + +#define SMC_BC_TACS(x) (x << 28) /* 0clk address set-up */ +#define SMC_BC_TCOS(x) (x << 24) /* 4clk chip selection set-up */ +#define SMC_BC_TACC(x) (x << 16) /* 14clk access cycle */ +#define SMC_BC_TCOH(x) (x << 12) /* 1clk chip selection hold */ +#define SMC_BC_TAH(x) (x << 8) /* 4clk address holding time */ +#define SMC_BC_TACP(x) (x << 4) /* 6clk page mode access cycle */ +#define SMC_BC_PMC(x) (x << 0) /* normal(1data)page mode configuration */ + +#ifndef __ASSEMBLY__ +struct s5pc1xx_smc { + unsigned int bw; + unsigned int bc[6]; +}; +#endif /* __ASSEMBLY__ */ + +#endif /* __ASM_ARCH_SMC_H_ */ -- cgit v1.3.1 From 01802e0d22a4bb3903b342ff2357ea3bbcccd289 Mon Sep 17 00:00:00 2001 From: Naveen Krishna CH Date: Fri, 5 Mar 2010 17:15:38 +0900 Subject: S5PC100: Function to configure the SROMC registers. Nand Flash, Ethernet, other features might need to configure the SROMC registers accordingly. The config_sromc() functions helps with this. Signed-off-by: Naveen Krishna Ch Signed-off-by: Minkyu Kang --- cpu/arm_cortexa8/s5pc1xx/Makefile | 1 + cpu/arm_cortexa8/s5pc1xx/sromc.c | 53 ++++++++++++++++++++++++++++++++++++++ include/asm-arm/arch-s5pc1xx/smc.h | 3 +++ 3 files changed, 57 insertions(+) create mode 100644 cpu/arm_cortexa8/s5pc1xx/sromc.c (limited to 'include') diff --git a/cpu/arm_cortexa8/s5pc1xx/Makefile b/cpu/arm_cortexa8/s5pc1xx/Makefile index 7290c2f5223..01c93feda82 100644 --- a/cpu/arm_cortexa8/s5pc1xx/Makefile +++ b/cpu/arm_cortexa8/s5pc1xx/Makefile @@ -34,6 +34,7 @@ SOBJS += reset.o COBJS += clock.o COBJS += cpu_info.o COBJS += gpio.o +COBJS += sromc.o COBJS += timer.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/cpu/arm_cortexa8/s5pc1xx/sromc.c b/cpu/arm_cortexa8/s5pc1xx/sromc.c new file mode 100644 index 00000000000..380be81be5e --- /dev/null +++ b/cpu/arm_cortexa8/s5pc1xx/sromc.c @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2010 Samsung Electronics + * Naveen Krishna Ch + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +/* + * s5pc1xx_config_sromc() - select the proper SROMC Bank and configure the + * band width control and bank control registers + * srom_bank - SROM Bank 0 to 5 + * smc_bw_conf - SMC Band witdh reg configuration value + * smc_bc_conf - SMC Bank Control reg configuration value + */ +void s5pc1xx_config_sromc(u32 srom_bank, u32 smc_bw_conf, u32 smc_bc_conf) +{ + u32 tmp; + struct s5pc1xx_smc *srom; + + if (cpu_is_s5pc100()) + srom = (struct s5pc1xx_smc *)S5PC100_SROMC_BASE; + else + srom = (struct s5pc1xx_smc *)S5PC110_SROMC_BASE; + + /* Configure SMC_BW register to handle proper SROMC bank */ + tmp = srom->bw; + tmp &= ~(0xF << (srom_bank * 4)); + tmp |= smc_bw_conf; + srom->bw = tmp; + + /* Configure SMC_BC register */ + srom->bc[srom_bank] = smc_bc_conf; +} diff --git a/include/asm-arm/arch-s5pc1xx/smc.h b/include/asm-arm/arch-s5pc1xx/smc.h index e1a53995ab0..88f4ffe33ae 100644 --- a/include/asm-arm/arch-s5pc1xx/smc.h +++ b/include/asm-arm/arch-s5pc1xx/smc.h @@ -47,4 +47,7 @@ struct s5pc1xx_smc { }; #endif /* __ASSEMBLY__ */ +/* Configure the Band Width and Bank Control Regs for required SROMC Bank */ +void s5pc1xx_config_sromc(u32 srom_bank, u32 smc_bw_conf, u32 smc_bc_conf); + #endif /* __ASM_ARCH_SMC_H_ */ -- cgit v1.3.1 From 2528dc52361bea49e6bd4a95ce2374d0004ca56f Mon Sep 17 00:00:00 2001 From: Naveen Krishna CH Date: Fri, 5 Mar 2010 17:16:05 +0900 Subject: SAMSUNG: SMDKC100: Adds ethernet support. Add setup for ethernet on SMDKC100, allowing kernel/ramdisk to be loaded over tftp. The preinit function will configure GPIO (GPK0CON) & SROMC to look for environment in SROM Bank 3. Signed-off-by: Naveen Krishna Ch Signed-off-by: Minkyu Kang --- board/samsung/smdkc100/smdkc100.c | 39 +++++++++++++++++++++++++++++++++++++++ include/configs/smdkc100.h | 12 +++++++++++- 2 files changed, 50 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/board/samsung/smdkc100/smdkc100.c b/board/samsung/smdkc100/smdkc100.c index 15a1a27c361..fb466c6ece4 100644 --- a/board/samsung/smdkc100/smdkc100.c +++ b/board/samsung/smdkc100/smdkc100.c @@ -23,10 +23,40 @@ */ #include +#include +#include +#include +#include + DECLARE_GLOBAL_DATA_PTR; +/* + * Miscellaneous platform dependent initialisations + */ +static void smc9115_pre_init(void) +{ + u32 smc_bw_conf, smc_bc_conf; + + struct s5pc100_gpio *const gpio = + (struct s5pc100_gpio *)S5PC100_GPIO_BASE; + + /* gpio configuration GPK0CON */ + gpio_cfg_pin(&gpio->gpio_k0, CONFIG_ENV_SROM_BANK, GPIO_FUNC(2)); + + /* Ethernet needs bus width of 16 bits */ + smc_bw_conf = SMC_DATA16_WIDTH(CONFIG_ENV_SROM_BANK); + smc_bc_conf = SMC_BC_TACS(0x0) | SMC_BC_TCOS(0x4) | SMC_BC_TACC(0xe) + | SMC_BC_TCOH(0x1) | SMC_BC_TAH(0x4) + | SMC_BC_TACP(0x6) | SMC_BC_PMC(0x0); + + /* Select and configure the SROMC bank */ + s5pc1xx_config_sromc(CONFIG_ENV_SROM_BANK, smc_bw_conf, smc_bc_conf); +} + int board_init(void) { + smc9115_pre_init(); + gd->bd->bi_arch_number = MACH_TYPE_SMDKC100; gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; @@ -49,3 +79,12 @@ int checkboard(void) return 0; } #endif + +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC911X + rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); +#endif + return rc; +} diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index a8ba0528b64..09bce6d0fa6 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -83,7 +83,6 @@ #undef CONFIG_CMD_FLASH #undef CONFIG_CMD_IMLS #undef CONFIG_CMD_NAND -#undef CONFIG_CMD_NET #define CONFIG_CMD_CACHE #define CONFIG_CMD_REGINFO @@ -235,4 +234,15 @@ #define CONFIG_DOS_PARTITION 1 +/* + * Ethernet Contoller driver + */ +#ifdef CONFIG_CMD_NET +#define CONFIG_NET_MULTI +#define CONFIG_SMC911X 1 /* we have a SMC9115 on-board */ +#define CONFIG_SMC911X_16_BIT 1 /* SMC911X_16_BIT Mode */ +#define CONFIG_SMC911X_BASE 0x98800300 /* SMC911X Drive Base */ +#define CONFIG_ENV_SROM_BANK 3 /* Select SROM Bank-3 for Ethernet*/ +#endif /* CONFIG_CMD_NET */ + #endif /* __CONFIG_H */ -- cgit v1.3.1 From c9f72b3da8855c3c9679c821127cccd91e0380ed Mon Sep 17 00:00:00 2001 From: Daniel Gorsulowski Date: Wed, 17 Mar 2010 08:21:11 +0100 Subject: at91: boards cleanup for deprecated CONFIG_CMD_AUTOSCRIPT CONFIG_CMD_AUTOSCRIPT support is deprecated and non-existing This clean up patch removes the references for esd boards Signed-off-by: Daniel Gorsulowski --- include/configs/meesc.h | 1 - include/configs/otc570.h | 1 - 2 files changed, 2 deletions(-) (limited to 'include') diff --git a/include/configs/meesc.h b/include/configs/meesc.h index d002b975101..e085f4a47c5 100644 --- a/include/configs/meesc.h +++ b/include/configs/meesc.h @@ -82,7 +82,6 @@ */ #include #undef CONFIG_CMD_BDI -#undef CONFIG_CMD_AUTOSCRIPT #undef CONFIG_CMD_FPGA #undef CONFIG_CMD_LOADS #undef CONFIG_CMD_IMLS diff --git a/include/configs/otc570.h b/include/configs/otc570.h index 4fde012c8fb..fb0f576f456 100644 --- a/include/configs/otc570.h +++ b/include/configs/otc570.h @@ -131,7 +131,6 @@ * Command line configuration. */ #include -#undef CONFIG_CMD_AUTOSCRIPT #undef CONFIG_CMD_FPGA #undef CONFIG_CMD_LOADS #undef CONFIG_CMD_IMLS -- cgit v1.3.1 From 0701f730cebc8dd065b70812ca0332055dcf10f8 Mon Sep 17 00:00:00 2001 From: Matthias Fuchs Date: Thu, 25 Mar 2010 14:30:13 +0100 Subject: at91: use C structs for AT91 OHCI code This patch is part of migrating the AT91 support towards using C struct for all SOC access. It removes one more CONFIG_AT91_LEGACY warning. at91_pmc.h needs cleanup after migration of the drivers has been done. Signed-off-by: Matthias Fuchs --- drivers/usb/host/ohci-at91.c | 28 +++++++++++++--------------- include/asm-arm/arch-at91/at91_pmc.h | 23 ++++++++++++++++++----- 2 files changed, 31 insertions(+), 20 deletions(-) (limited to 'include') diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 29f3ba186ad..b2e03bc58bc 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -25,11 +25,6 @@ #if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) -#ifndef CONFIG_AT91_LEGACY -#define CONFIG_AT91_LEGACY -#warning Please update to use C structur SoC access ! -#endif - #include #include #include @@ -37,22 +32,23 @@ int usb_cpu_init(void) { + at91_pmc_t *pmc = (at91_pmc_t *)AT91_PMC_BASE; #if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \ defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \ defined(CONFIG_AT91SAM9261) /* Enable PLLB */ - at91_sys_write(AT91_CKGR_PLLBR, get_pllb_init()); - while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB) + writel(get_pllb_init(), &pmc->pllbr); + while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB) ; #endif /* Enable USB host clock. */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_UHP); + writel(1 << AT91_ID_UHP, &pmc->pcer); #ifdef CONFIG_AT91SAM9261 - at91_sys_write(AT91_PMC_SCER, AT91_PMC_UHP | AT91_PMC_HCK0); + writel(AT91_PMC_UHP | AT91_PMC_HCK0, &pmc->scer); #else - at91_sys_write(AT91_PMC_SCER, AT91_PMC_UHP); + writel(AT91_PMC_UHP, &pmc->scer); #endif return 0; @@ -60,19 +56,21 @@ int usb_cpu_init(void) int usb_cpu_stop(void) { + at91_pmc_t *pmc = (at91_pmc_t *)AT91_PMC_BASE; + /* Disable USB host clock. */ - at91_sys_write(AT91_PMC_PCDR, 1 << AT91_ID_UHP); + writel(1 << AT91_ID_UHP, &pmc->pcdr); #ifdef CONFIG_AT91SAM9261 - at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP | AT91_PMC_HCK0); + writel(AT91_PMC_UHP | AT91_PMC_HCK0, &pmc->scdr); #else - at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP); + writel(AT91_PMC_UHP, &pmc->scdr); #endif #if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \ defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) /* Disable PLLB */ - at91_sys_write(AT91_CKGR_PLLBR, 0); - while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != 0) + writel(0, &pmc->pllbr); + while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != 0) ; #endif diff --git a/include/asm-arm/arch-at91/at91_pmc.h b/include/asm-arm/arch-at91/at91_pmc.h index 680fe33270d..5b1a85d0514 100644 --- a/include/asm-arm/arch-at91/at91_pmc.h +++ b/include/asm-arm/arch-at91/at91_pmc.h @@ -108,11 +108,12 @@ typedef struct at91_pmc { #define AT91_PMC_IXR_PCKRDY3 0x00000800 #ifdef CONFIG_AT91_LEGACY - #define AT91_PMC_SCER (AT91_PMC + 0x00) /* System Clock Enable Register */ #define AT91_PMC_SCDR (AT91_PMC + 0x04) /* System Clock Disable Register */ #define AT91_PMC_SCSR (AT91_PMC + 0x08) /* System Clock Status Register */ +#endif + #define AT91_PMC_PCK (1 << 0) /* Processor Clock */ #define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */ #define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */ @@ -128,27 +129,34 @@ typedef struct at91_pmc { #define AT91_PMC_HCK0 (1 << 16) /* AHB Clock (USB host) [AT91SAM9261 only] */ #define AT91_PMC_HCK1 (1 << 17) /* AHB Clock (LCD) [AT91SAM9261 only] */ +#ifdef CONFIG_AT91_LEGACY #define AT91_PMC_PCER (AT91_PMC + 0x10) /* Peripheral Clock Enable Register */ #define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */ #define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */ #define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL, CAP9] */ +#endif + #define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */ #define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */ #define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */ #define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI PLL Start-up Time */ +#ifdef CONFIG_AT91_LEGACY #define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */ +#endif #define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */ #define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [SAM9x, CAP9] */ #define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */ - +#ifdef CONFIG_AT91_LEGACY #define AT91_CKGR_MCFR (AT91_PMC + 0x24) /* Main Clock Frequency Register */ +#endif #define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */ #define AT91_PMC_MAINRDY (1 << 16) /* Main Clock Ready */ - +#ifdef CONFIG_AT91_LEGACY #define AT91_CKGR_PLLAR (AT91_PMC + 0x28) /* PLL A Register */ #define AT91_CKGR_PLLBR (AT91_PMC + 0x2c) /* PLL B Register */ +#endif #define AT91_PMC_DIV (0xff << 0) /* Divider */ #define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */ #define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */ @@ -160,7 +168,9 @@ typedef struct at91_pmc { #define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */ #define AT91_PMC_PLLA_WR_ERRATA (1 << 29) /* Bit 29 must always be set to 1 when programming the CKGR_PLLAR register */ +#ifdef CONFIG_AT91_LEGACY #define AT91_PMC_MCKR (AT91_PMC + 0x30) /* Master Clock Register */ +#endif #define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */ #define AT91_PMC_CSS_SLOW (0 << 0) #define AT91_PMC_CSS_MAIN (1 << 0) @@ -188,11 +198,13 @@ typedef struct at91_pmc { #define AT91_PMC_PDIV_1 (0 << 12) #define AT91_PMC_PDIV_2 (1 << 12) +#ifdef CONFIG_AT91_LEGACY #define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */ #define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */ #define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */ #define AT91_PMC_SR (AT91_PMC + 0x68) /* Status Register */ +#endif #define AT91_PMC_MOSCS (1 << 0) /* MOSCS Flag */ #define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */ #define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */ @@ -203,12 +215,13 @@ typedef struct at91_pmc { #define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */ #define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */ #define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */ +#ifdef CONFIG_AT91_LEGACY #define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */ #define AT91_PMC_PROT (AT91_PMC + 0xe4) /* Protect Register [AT91CAP9 revC only] */ +#endif #define AT91_PMC_PROTKEY 0x504d4301 /* Activation Code */ - +#ifdef CONFIG_AT91_LEGACY #define AT91_PMC_VER (AT91_PMC + 0xfc) /* PMC Module Version [AT91CAP9 only] */ - #endif /* CONFIG_AT91_LEGACY */ #endif -- cgit v1.3.1