From 5bcd64cf5c5510365a14d11043033eb7b6144ead Mon Sep 17 00:00:00 2001 From: Karlheinz Jerg Date: Mon, 21 Jan 2013 03:55:18 +0000 Subject: powerpc/83xx/km: add MV88E6122 switch support for kmvect1 kmvect1 has a UEC2 connection to the piggy board and a UEC0 connection to the switch MV88E6122. This switch has a connection to a frontport ethernet interface. The ethernet port used for network booting is automatically selected by u-boot. If a Piggy is plugged, the Piggy port is selected (UEC2, eth1). If the Piggy isn't present, the Frontport is selected (UEC0, eth0). The switch reset is connected to a GPIO on the PRIO3 board FPGA (GPIO28) and released at startup. Signed-off-by: Karlheinz Jerg Signed-off-by: Holger Brunck --- include/configs/km/km83xx-common.h | 8 ++------ include/configs/suvd3.h | 37 +++++++++++++++++++++++++++++++++++++ 2 files changed, 39 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/configs/km/km83xx-common.h b/include/configs/km/km83xx-common.h index a9823d6ef94..1e596c860ad 100644 --- a/include/configs/km/km83xx-common.h +++ b/include/configs/km/km83xx-common.h @@ -165,19 +165,15 @@ #define CONFIG_UEC_ETH #define CONFIG_ETHPRIME "UEC0" +#if !defined(CONFIG_MPC8309) #define CONFIG_UEC_ETH1 /* GETH1 */ #define UEC_VERBOSE_DEBUG 1 +#endif #ifdef CONFIG_UEC_ETH1 -#if defined(CONFIG_MPC8309) -#define CONFIG_SYS_UEC1_UCC_NUM 2 /* UCC3 */ -#define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE /* not used in RMII Mode */ -#define CONFIG_SYS_UEC1_TX_CLK QE_CLK12 -#else #define CONFIG_SYS_UEC1_UCC_NUM 3 /* UCC4 */ #define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE /* not used in RMII Mode */ #define CONFIG_SYS_UEC1_TX_CLK QE_CLK17 -#endif #define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH #define CONFIG_SYS_UEC1_PHY_ADDR 0 #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII diff --git a/include/configs/suvd3.h b/include/configs/suvd3.h index c50832c1e01..bbf9da545b2 100644 --- a/include/configs/suvd3.h +++ b/include/configs/suvd3.h @@ -110,4 +110,41 @@ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) #define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U +/* + * QE UEC ethernet configuration + */ +#if defined(CONFIG_KMVECT1) +#define CONFIG_MV88E6352_SWITCH +#define CONFIG_KM_MVEXTSW_ADDR 0x10 + +/* ethernet port connected to simple switch 88e6122 (UEC0) */ +#define CONFIG_UEC_ETH1 +#define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */ +#define CONFIG_SYS_UEC1_RX_CLK QE_CLK9 +#define CONFIG_SYS_UEC1_TX_CLK QE_CLK10 + +#define CONFIG_FIXED_PHY 0xFFFFFFFF +#define CONFIG_SYS_FIXED_PHY_ADDR 0x1E /* unused address */ +#define CONFIG_SYS_FIXED_PHY_PORT(devnum, speed, duplex) \ + {devnum, speed, duplex} +#define CONFIG_SYS_FIXED_PHY_PORTS \ + CONFIG_SYS_FIXED_PHY_PORT("UEC0", SPEED_100, DUPLEX_FULL) + +#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH +#define CONFIG_SYS_UEC1_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR +#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII +#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 + +/* ethernet port connected to piggy (UEC2) */ +#define CONFIG_HAS_ETH1 +#define CONFIG_UEC_ETH2 +#define CONFIG_SYS_UEC2_UCC_NUM 2 /* UCC3 */ +#define CONFIG_SYS_UEC2_RX_CLK QE_CLK_NONE /* not used in RMII Mode */ +#define CONFIG_SYS_UEC2_TX_CLK QE_CLK12 +#define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH +#define CONFIG_SYS_UEC2_PHY_ADDR 0 +#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII +#define CONFIG_SYS_UEC2_INTERFACE_SPEED 100 +#endif /* CONFIG_KMVECT1 */ + #endif /* __CONFIG_H */ -- cgit v1.3.1 From 6515139bfb9bac1e1aab07bfcf86239206d277bf Mon Sep 17 00:00:00 2001 From: Holger Brunck Date: Mon, 21 Jan 2013 03:55:19 +0000 Subject: powerpc/83xx: use ppc_6xx as arch variable for kmvect1 On this board we are using hard floating point, so select the correct toolchain. Signed-off-by: Holger Brunck --- include/configs/km/km8309-common.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/configs/km/km8309-common.h b/include/configs/km/km8309-common.h index b36e892cbeb..7bd1e92c22b 100644 --- a/include/configs/km/km8309-common.h +++ b/include/configs/km/km8309-common.h @@ -22,7 +22,7 @@ #define CONFIG_MPC830x 1 /* MPC830x family */ #define CONFIG_MPC8309 1 /* MPC8309 CPU specific */ -#define CONFIG_KM_DEF_ARCH "arch=ppc_8xx\0" +#define CONFIG_KM_DEF_ARCH "arch=ppc_82xx\0" #define CONFIG_CMD_DIAG 1 /* include common defines/options for all 83xx Keymile boards */ -- cgit v1.3.1 From dacc109c41f82fcce68bd77e531663b485708f7a Mon Sep 17 00:00:00 2001 From: Andreas Huber Date: Mon, 21 Jan 2013 03:55:20 +0000 Subject: km/common: introduce $uimage variable Replace the hardcoded string with a variable. If CONFIG_NAND_ECC_BCH is set we use a specific name for the uImage (ecc_bch_uImage). Signed-off-by: Andreas Huber Signed-off-by: Holger Brunck --- include/configs/km/keymile-common.h | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h index f64748e349c..ae88759240f 100644 --- a/include/configs/km/keymile-common.h +++ b/include/configs/km/keymile-common.h @@ -148,6 +148,12 @@ "ubi part " CONFIG_KM_UBI_PARTITION_NAME_APP "; fi\0" #endif /* CONFIG_KM_UBI_PARTITION_NAME_APP */ +#ifdef CONFIG_NAND_ECC_BCH +#define CONFIG_KM_UIMAGE_NAME "ecc_bch_uImage\0" +#else +#define CONFIG_KM_UIMAGE_NAME "uImage\0" +#endif + /* * boottargets * - set 'subbootcmds' @@ -210,9 +216,10 @@ */ #define CONFIG_KM_DEF_ENV_FLASH_BOOT \ "cramfsaddr=" __stringify(CONFIG_KM_CRAMFS_ADDR) "\0" \ - "cramfsloadkernel=cramfsload ${load_addr_r} uImage\0" \ + "cramfsloadkernel=cramfsload ${load_addr_r} ${uimage}\0" \ "ubicopy=ubi read "__stringify(CONFIG_KM_CRAMFS_ADDR) \ " bootfs${boot_bank}\0" \ + "uimage=" CONFIG_KM_UIMAGE_NAME \ CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI /* -- cgit v1.3.1 From be7576fa15498e6874bbc901f0aefb7f2f17943d Mon Sep 17 00:00:00 2001 From: Holger Brunck Date: Mon, 21 Jan 2013 03:55:23 +0000 Subject: powerpc/83xx: use NAND_ECC_BCH for kmcoge5ne Switch from 1-bit ecc to 4-bit ecc. Signed-off-by: Holger Brunck --- include/configs/km8360.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/configs/km8360.h b/include/configs/km8360.h index 7631ab6a656..5b191bcdcde 100644 --- a/include/configs/km8360.h +++ b/include/configs/km8360.h @@ -25,6 +25,8 @@ #define CONFIG_KM_BOARD_NAME "kmcoge5ne" #define CONFIG_KM_DEF_NETDEV "netdev=eth1\0" #define CONFIG_CMD_NAND +#define CONFIG_NAND_ECC_BCH +#define CONFIG_BCH #define CONFIG_NAND_KMETER1 #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define NAND_MAX_CHIPS 1 -- cgit v1.3.1 From a7bc914446b46407bb478d4c7b6cb616e1cddb49 Mon Sep 17 00:00:00 2001 From: Holger Brunck Date: Mon, 21 Jan 2013 03:55:24 +0000 Subject: km/common: add eccmode to kernel commandline If CONFIG_NAND_ECC_BCH is chosen from in the board configuration we add an ecc mode to the kernel commandline. Signed-off-by: Holger Brunck --- include/configs/km/keymile-common.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h index ae88759240f..796f33080d3 100644 --- a/include/configs/km/keymile-common.h +++ b/include/configs/km/keymile-common.h @@ -150,8 +150,10 @@ #ifdef CONFIG_NAND_ECC_BCH #define CONFIG_KM_UIMAGE_NAME "ecc_bch_uImage\0" +#define CONFIG_KM_ECC_MODE " eccmode=bch" #else #define CONFIG_KM_UIMAGE_NAME "uImage\0" +#define CONFIG_KM_ECC_MODE #endif /* @@ -190,6 +192,7 @@ ":${hostname}:${netdev}:off3" \ " console=" CONFIG_KM_CONSOLE_TTY ",${baudrate}" \ " mem=${kernelmem} init=${init}" \ + CONFIG_KM_ECC_MODE \ " phram.phram=phvar,${varaddr}," __stringify(CONFIG_KM_PHRAM)\ " " CONFIG_KM_UBI_LINUX_MTD " " \ CONFIG_KM_DEF_BOOT_ARGS_CPU \ -- cgit v1.3.1 From 47f53649a2086bf9c351e86cf5481d14c7ea5720 Mon Sep 17 00:00:00 2001 From: Holger Brunck Date: Mon, 21 Jan 2013 03:55:25 +0000 Subject: powerpc/83xx/km: cleanup tuxx1 support This is a preparation for the upcoming kmopti2 board. This board has also a second fpga on board which is different to the tuxx1 target. But we want to use the same header file. So remove the config option KM_DISABLE_APP2 and simply use the board names to distinguish the features. Signed-off-by: Holger Brunck --- boards.cfg | 6 +++--- include/configs/tuxx1.h | 17 +++++++++-------- 2 files changed, 12 insertions(+), 11 deletions(-) (limited to 'include') diff --git a/boards.cfg b/boards.cfg index b1319aace0f..c1ed138b3c9 100644 --- a/boards.cfg +++ b/boards.cfg @@ -705,9 +705,9 @@ SIMPC8313_SP powerpc mpc83xx simpc8313 sheldon TQM834x powerpc mpc83xx tqm834x tqc suvd3 powerpc mpc83xx km83xx keymile - suvd3:SUVD3 kmvect1 powerpc mpc83xx km83xx keymile - suvd3:KMVECT1 -tuge1 powerpc mpc83xx km83xx keymile - tuxx1:KM_DISABLE_APP2,TUGE1 -tuxx1 powerpc mpc83xx km83xx keymile -kmsupx5 powerpc mpc83xx km83xx keymile - tuxx1:KM_DISABLE_APP2,KMSUPX5 +tuge1 powerpc mpc83xx km83xx keymile - tuxx1:TUGE1 +tuxx1 powerpc mpc83xx km83xx keymile - tuxx1:TUXX1 +kmsupx5 powerpc mpc83xx km83xx keymile - tuxx1:KMSUPX5 sbc8548 powerpc mpc85xx sbc8548 - - sbc8548 sbc8548_PCI_33 powerpc mpc85xx sbc8548 - - sbc8548:PCI,33 sbc8548_PCI_33_PCIE powerpc mpc85xx sbc8548 - - sbc8548:PCI,33,PCIE diff --git a/include/configs/tuxx1.h b/include/configs/tuxx1.h index 90d2e61147b..3997717193d 100644 --- a/include/configs/tuxx1.h +++ b/include/configs/tuxx1.h @@ -11,7 +11,7 @@ * (C) Copyright 2008 * Heiko Schocher, DENX Software Engineering, hs@denx.de. * - * (C) Copyright 2010-2012 + * (C) Copyright 2010-2013 * Lukas Roggli, KEYMILE Ltd, lukas.roggli@keymile.com * Holger Brunck, Keymile GmbH, holger.bruncl@keymile.com * @@ -27,16 +27,17 @@ /* * High Level Configuration Options */ -#ifdef CONFIG_KMSUPX5 +#if defined(CONFIG_KMSUPX5) #define CONFIG_KM_BOARD_NAME "kmsupx5" #define CONFIG_HOSTNAME kmsupx5 -#elif defined CONFIG_TUGE1 +#elif defined(CONFIG_TUGE1) #define CONFIG_KM_BOARD_NAME "tuge1" #define CONFIG_HOSTNAME tuge1 -#else -#define CONFIG_TUXXX /* TUXX1 board (tuxa1/tuda1) specific */ +#elif defined(CONFIG_TUXX1) /* TUXX1 board (tuxa1/tuda1) specific */ #define CONFIG_KM_BOARD_NAME "tuxx1" #define CONFIG_HOSTNAME tuxx1 +#else +#error ("Board not supported") #endif #define CONFIG_SYS_TEXT_BASE 0xF0000000 @@ -46,7 +47,7 @@ #define CONFIG_SYS_APP1_BASE 0xA0000000 /* PAXG */ #define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */ -#ifndef CONFIG_KM_DISABLE_APP2 +#if defined(CONFIG_TUXX1) #define CONFIG_SYS_APP2_BASE 0xB0000000 /* PINC3 */ #define CONFIG_SYS_APP2_SIZE 256 /* Megabytes */ #endif @@ -81,7 +82,7 @@ OR_GPCM_TRLX_SET | \ OR_GPCM_EHTR_CLEAR | \ OR_GPCM_EAD) -#ifndef CONFIG_KM_DISABLE_APP2 +#if defined(CONFIG_TUXX1) /* * Configuration for C3 on the local bus */ @@ -125,7 +126,7 @@ BATL_GUARDEDSTORAGE) #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U -#ifdef CONFIG_KM_DISABLE_APP2 +#if defined(CONFIG_TUGE1) || defined(CONFIG_KMSUPX5) #define CONFIG_SYS_IBAT6L (0) #define CONFIG_SYS_IBAT6U (0) #define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L -- cgit v1.3.1 From 4714f8e4d5335306dd75d97936c852994bd02f8b Mon Sep 17 00:00:00 2001 From: Holger Brunck Date: Mon, 21 Jan 2013 03:55:26 +0000 Subject: powerpc/83xx/km: add support for kmopti2 board This board is similar to TUXX1 but it has a different sized second FPGA. Therefore the configuration for the third chipselect is different. Signed-off-by: Holger Brunck --- boards.cfg | 1 + include/configs/tuxx1.h | 31 +++++++++++++++++++++++++------ 2 files changed, 26 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/boards.cfg b/boards.cfg index c1ed138b3c9..7f772a08409 100644 --- a/boards.cfg +++ b/boards.cfg @@ -707,6 +707,7 @@ suvd3 powerpc mpc83xx km83xx keymile kmvect1 powerpc mpc83xx km83xx keymile - suvd3:KMVECT1 tuge1 powerpc mpc83xx km83xx keymile - tuxx1:TUGE1 tuxx1 powerpc mpc83xx km83xx keymile - tuxx1:TUXX1 +kmopti2 powerpc mpc83xx km83xx keymile - tuxx1:KMOPTI2 kmsupx5 powerpc mpc83xx km83xx keymile - tuxx1:KMSUPX5 sbc8548 powerpc mpc85xx sbc8548 - - sbc8548 sbc8548_PCI_33 powerpc mpc85xx sbc8548 - - sbc8548:PCI,33 diff --git a/include/configs/tuxx1.h b/include/configs/tuxx1.h index 3997717193d..6caf23a4781 100644 --- a/include/configs/tuxx1.h +++ b/include/configs/tuxx1.h @@ -36,6 +36,9 @@ #elif defined(CONFIG_TUXX1) /* TUXX1 board (tuxa1/tuda1) specific */ #define CONFIG_KM_BOARD_NAME "tuxx1" #define CONFIG_HOSTNAME tuxx1 +#elif defined(CONFIG_KMOPTI2) +#define CONFIG_KM_BOARD_NAME "kmopti2" +#define CONFIG_HOSTNAME kmopti2 #else #error ("Board not supported") #endif @@ -47,18 +50,18 @@ #define CONFIG_SYS_APP1_BASE 0xA0000000 /* PAXG */ #define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */ -#if defined(CONFIG_TUXX1) +#if defined(CONFIG_TUXX1) || defined(CONFIG_KMOPTI2) #define CONFIG_SYS_APP2_BASE 0xB0000000 /* PINC3 */ #define CONFIG_SYS_APP2_SIZE 256 /* Megabytes */ #endif /* * Init Local Bus Memory Controller: - * - * Bank Bus Machine PortSz Size Device on TUDA1 TUXA1 TUGE1 KMSUPX4 - * ---- --- ------- ------ ----- --------------------------------------- - * 2 Local GPCM 8 bit 256MB PAXG LPXF PAXI LPXF - * 3 Local GPCM 8 bit 256MB PINC3 PINC2 unused unused + * Device on + * Bank Bus Machine PortSz Size TUDA1 TUXA1 TUGE1 KMSUPX4 KMOPTI2 + * ---- --- ------- ------ ----- --------------------------------------- + * 2 Local GPCM 8 bit 256MB PAXG LPXF PAXI LPXF PAXE + * 3 Local GPCM 8 bit 256MB PINC3 PINC2 unused unused OPI2(16 bit) * */ @@ -108,6 +111,22 @@ MxMR_WLFx_2X) #endif +#if defined(CONFIG_KMOPTI2) +/* + * Configuration for C3 on the local bus + */ +#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_APP2_BASE +#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) +#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \ + BR_PS_16 | \ + BR_MS_GPCM | \ + BR_V) +#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \ + OR_GPCM_SCY_4 | \ + OR_GPCM_TRLX_CLEAR | \ + OR_GPCM_EHTR_CLEAR) +#endif + /* * MMU Setup */ -- cgit v1.3.1 From 25b29921b2f5a9a133c6196afaf05fce1be9927b Mon Sep 17 00:00:00 2001 From: Holger Brunck Date: Mon, 21 Jan 2013 03:55:27 +0000 Subject: powerpc/83xx/km: remove uneeded CONFIG_MISC_INIT_R Remove it from the processor specific headers. This is already defined in the common header km83xx.h. Signed-off-by: Holger Brunck --- include/configs/km/km8309-common.h | 2 -- include/configs/km/km8321-common.h | 2 -- 2 files changed, 4 deletions(-) (limited to 'include') diff --git a/include/configs/km/km8309-common.h b/include/configs/km/km8309-common.h index 7bd1e92c22b..7f9cffa3b71 100644 --- a/include/configs/km/km8309-common.h +++ b/include/configs/km/km8309-common.h @@ -33,8 +33,6 @@ /* at end of uboot partition, before env */ #define CONFIG_SYS_QE_FMAN_FW_ADDR 0xF00B0000 -#define CONFIG_MISC_INIT_R - /* * System IO Config */ diff --git a/include/configs/km/km8321-common.h b/include/configs/km/km8321-common.h index 8ad6fc3a333..abb908162a8 100644 --- a/include/configs/km/km8321-common.h +++ b/include/configs/km/km8321-common.h @@ -38,8 +38,6 @@ /* include common defines/options for all 83xx Keymile boards */ #include "km83xx-common.h" -#define CONFIG_MISC_INIT_R - /* * System IO Config */ -- cgit v1.3.1 From 411190cb16b63e39345a608b68b3d1be5168117a Mon Sep 17 00:00:00 2001 From: Holger Brunck Date: Mon, 21 Jan 2013 03:55:28 +0000 Subject: powerpc/83xx/km: drop uneeded dtt_bus environment var There is no need for a environment variable to configure the dtt bus. Signed-off-by: Holger Brunck --- board/keymile/km83xx/km83xx.c | 12 ++++-------- include/configs/km/km83xx-common.h | 1 - 2 files changed, 4 insertions(+), 9 deletions(-) (limited to 'include') diff --git a/board/keymile/km83xx/km83xx.c b/board/keymile/km83xx/km83xx.c index 1e8e2cc360d..faaa39bc201 100644 --- a/board/keymile/km83xx/km83xx.c +++ b/board/keymile/km83xx/km83xx.c @@ -98,17 +98,13 @@ const qe_iop_conf_t qe_iop_conf_tab[] = { static int board_init_i2c_busses(void) { I2C_MUX_DEVICE *dev = NULL; - uchar *buf; + uchar *dtt_bus = (uchar *)"pca9547:70:a"; /* Set up the Bus for the DTTs */ - buf = (unsigned char *) getenv("dtt_bus"); - if (buf != NULL) - dev = i2c_mux_ident_muxstring(buf); - if (dev == NULL) { + dev = i2c_mux_ident_muxstring(dtt_bus); + if (dev == NULL) printf("Error couldn't add Bus for DTT\n"); - printf("please setup dtt_bus to where your\n"); - printf("DTT is found.\n"); - } + return 0; } diff --git a/include/configs/km/km83xx-common.h b/include/configs/km/km83xx-common.h index 1e596c860ad..eb0e5b6f326 100644 --- a/include/configs/km/km83xx-common.h +++ b/include/configs/km/km83xx-common.h @@ -312,7 +312,6 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ CONFIG_KM_DEF_ENV \ CONFIG_KM_DEF_ARCH \ - "dtt_bus=pca9547:70:a\0" \ "EEprom_ivm=pca9547:70:9\0" \ "newenv=" \ "prot off 0xF00C0000 +0x40000 && " \ -- cgit v1.3.1 From 7b395232da84ae59bd32985bf944a0a9f417a543 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Mon, 21 Jan 2013 21:10:38 +0000 Subject: malloc: make malloc_bin_reloc static MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On architectures where manual relocation is needed, the 'malloc_bin_reloc' function must be called after 'mem_malloc_init'. Make the 'malloc_bin_reloc' function static and call it directly from 'mem_malloc_init' instead of calling that from board_init_{r,f} functions of the affected architectures. Signed-off-by: Gabor Juhos Cc: Wolfgang Denk Cc: Andreas Bießmann Cc: Jason Jin Cc: Macpaul Lin Cc: Daniel Hellstrom Cc: Daniel Schwierzeck --- arch/avr32/lib/board.c | 1 - arch/m68k/lib/board.c | 1 - arch/nds32/lib/board.c | 1 - arch/sparc/lib/board.c | 1 - common/dlmalloc.c | 6 +++++- include/malloc.h | 1 - 6 files changed, 5 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/arch/avr32/lib/board.c b/arch/avr32/lib/board.c index d3c8cb76dde..bd1be73ae4c 100644 --- a/arch/avr32/lib/board.c +++ b/arch/avr32/lib/board.c @@ -286,7 +286,6 @@ void board_init_r(gd_t *new_gd, ulong dest_addr) /* The malloc area is right below the monitor image in RAM */ mem_malloc_init(CONFIG_SYS_MONITOR_BASE + gd->reloc_off - CONFIG_SYS_MALLOC_LEN, CONFIG_SYS_MALLOC_LEN); - malloc_bin_reloc(); dma_alloc_init(); enable_interrupts(); diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c index c372ae228b5..33acffe4316 100644 --- a/arch/m68k/lib/board.c +++ b/arch/m68k/lib/board.c @@ -449,7 +449,6 @@ void board_init_r (gd_t *id, ulong dest_addr) /* The Malloc area is immediately below the monitor copy in DRAM */ mem_malloc_init (CONFIG_SYS_MONITOR_BASE + gd->reloc_off - TOTAL_MALLOC_LEN, TOTAL_MALLOC_LEN); - malloc_bin_reloc (); #if !defined(CONFIG_SYS_NO_FLASH) puts ("Flash: "); diff --git a/arch/nds32/lib/board.c b/arch/nds32/lib/board.c index 09feaf37330..c919928a371 100644 --- a/arch/nds32/lib/board.c +++ b/arch/nds32/lib/board.c @@ -320,7 +320,6 @@ void board_init_r(gd_t *id, ulong dest_addr) /* The Malloc area is immediately below the monitor copy in DRAM */ malloc_start = dest_addr - TOTAL_MALLOC_LEN; mem_malloc_init(malloc_start, TOTAL_MALLOC_LEN); - malloc_bin_reloc(); #ifndef CONFIG_SYS_NO_FLASH /* configure available FLASH banks */ diff --git a/arch/sparc/lib/board.c b/arch/sparc/lib/board.c index 1b5e995b15a..79fb4c87eff 100644 --- a/arch/sparc/lib/board.c +++ b/arch/sparc/lib/board.c @@ -271,7 +271,6 @@ void board_init_f(ulong bootflag) /* The Malloc area is immediately below the monitor copy in RAM */ mem_malloc_init(CONFIG_SYS_MALLOC_BASE, CONFIG_SYS_MALLOC_END - CONFIG_SYS_MALLOC_BASE); - malloc_bin_reloc(); #if !defined(CONFIG_SYS_NO_FLASH) puts("Flash: "); diff --git a/common/dlmalloc.c b/common/dlmalloc.c index b2f0a1ad52e..2a9d169f92d 100644 --- a/common/dlmalloc.c +++ b/common/dlmalloc.c @@ -1485,7 +1485,7 @@ static mbinptr av_[NAV * 2 + 2] = { }; #ifdef CONFIG_NEEDS_MANUAL_RELOC -void malloc_bin_reloc (void) +static void malloc_bin_reloc(void) { mbinptr *p = &av_[2]; size_t i; @@ -1493,6 +1493,8 @@ void malloc_bin_reloc (void) for (i = 2; i < ARRAY_SIZE(av_); ++i, ++p) *p = (mbinptr)((ulong)*p + gd->reloc_off); } +#else +static inline void malloc_bin_reloc(void) {} #endif ulong mem_malloc_start = 0; @@ -1526,6 +1528,8 @@ void mem_malloc_init(ulong start, ulong size) mem_malloc_brk = start; memset((void *)mem_malloc_start, 0, size); + + malloc_bin_reloc(); } /* field-extraction macros */ diff --git a/include/malloc.h b/include/malloc.h index 84ecf79344f..6295929ea38 100644 --- a/include/malloc.h +++ b/include/malloc.h @@ -937,7 +937,6 @@ extern ulong mem_malloc_end; extern ulong mem_malloc_brk; void mem_malloc_init(ulong start, ulong size); -void malloc_bin_reloc(void); #ifdef __cplusplus }; /* end of extern "C" */ -- cgit v1.3.1 From 7df54d316e70e2d6ae080ef98aa9d2388bbb8af9 Mon Sep 17 00:00:00 2001 From: Piotr Wilczek Date: Sun, 27 Jan 2013 22:59:24 +0000 Subject: vsprintf: add ustrtoll function Add 'ustrtoull' function to convert size from string (ex: 1GiB) to unsigned long long type Signed-off-by: Piotr Wilczek Signed-off-by: Kyungmin Park --- include/exports.h | 1 + lib/vsprintf.c | 23 +++++++++++++++++++++++ 2 files changed, 24 insertions(+) (limited to 'include') diff --git a/include/exports.h b/include/exports.h index 6cf31aa5e79..41d5085e16c 100644 --- a/include/exports.h +++ b/include/exports.h @@ -24,6 +24,7 @@ int setenv (const char *varname, const char *varvalue); long simple_strtol(const char *cp,char **endp,unsigned int base); int strcmp(const char * cs,const char * ct); unsigned long ustrtoul(const char *cp, char **endp, unsigned int base); +unsigned long long ustrtoull(const char *cp, char **endp, unsigned int base); #if defined(CONFIG_CMD_I2C) int i2c_write (uchar, uint, int , uchar* , int); int i2c_read (uchar, uint, int , uchar* , int); diff --git a/lib/vsprintf.c b/lib/vsprintf.c index 3c432f8764f..533a96b85e3 100644 --- a/lib/vsprintf.c +++ b/lib/vsprintf.c @@ -126,6 +126,29 @@ unsigned long ustrtoul(const char *cp, char **endp, unsigned int base) return result; } +unsigned long long ustrtoull(const char *cp, char **endp, unsigned int base) +{ + unsigned long long result = simple_strtoull(cp, endp, base); + switch (**endp) { + case 'G': + result *= 1024; + /* fall through */ + case 'M': + result *= 1024; + /* fall through */ + case 'K': + case 'k': + result *= 1024; + if ((*endp)[1] == 'i') { + if ((*endp)[2] == 'B') + (*endp) += 3; + else + (*endp) += 2; + } + } + return result; +} + unsigned long long simple_strtoull(const char *cp, char **endp, unsigned int base) { -- cgit v1.3.1 From bda32ffcf712806c7880ded25a012fbeede35e80 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Sun, 24 Feb 2013 17:33:12 +0000 Subject: Update print_buffer() to use const The buffer cannot be changed by this function, so change the buffer pointer to a const. This allows callers with const pointer to use the function without a cast. Signed-off-by: Simon Glass --- include/common.h | 3 ++- lib/display_options.c | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/common.h b/include/common.h index 4ad17eafb9b..170f4391a67 100644 --- a/include/common.h +++ b/include/common.h @@ -270,7 +270,8 @@ int cpu_init(void); phys_size_t initdram (int); int display_options (void); void print_size(unsigned long long, const char *); -int print_buffer (ulong addr, void* data, uint width, uint count, uint linelen); +int print_buffer(ulong addr, const void *data, uint width, uint count, + uint linelen); /* common/main.c */ void main_loop (void); diff --git a/lib/display_options.c b/lib/display_options.c index 694d2f22e89..0339970e7d6 100644 --- a/lib/display_options.c +++ b/lib/display_options.c @@ -98,7 +98,8 @@ void print_size(unsigned long long size, const char *s) */ #define MAX_LINE_LENGTH_BYTES (64) #define DEFAULT_LINE_LENGTH_BYTES (16) -int print_buffer (ulong addr, void* data, uint width, uint count, uint linelen) +int print_buffer(ulong addr, const void *data, uint width, uint count, + uint linelen) { /* linebuf as a union causes proper alignment */ union linebuf { -- cgit v1.3.1 From e101550a9a8b956434cf2a73f66afbb42f4654bd Mon Sep 17 00:00:00 2001 From: Taylor Hutt Date: Sun, 24 Feb 2013 17:33:13 +0000 Subject: sandbox: Improve sandbox serial port keyboard interface Implements the tstc() interface for the serial driver. Multiplexing the console between the serial port and a keyboard uses a polling method of checking if characters are available; this means that the serial console must be non-blocking when attempting to read characters. Signed-off-by: Taylor Hutt Signed-off-by: Simon Glass --- arch/sandbox/cpu/os.c | 8 ++++++++ drivers/serial/sandbox.c | 44 ++++++++++++++++++++++++++++++++++++++------ include/os.h | 10 ++++++++++ 3 files changed, 56 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/arch/sandbox/cpu/os.c b/arch/sandbox/cpu/os.c index 36637af6ce4..3e37c930b06 100644 --- a/arch/sandbox/cpu/os.c +++ b/arch/sandbox/cpu/os.c @@ -44,6 +44,14 @@ ssize_t os_read(int fd, void *buf, size_t count) return read(fd, buf, count); } +ssize_t os_read_no_block(int fd, void *buf, size_t count) +{ + const int flags = fcntl(fd, F_GETFL, 0); + + fcntl(fd, F_SETFL, flags | O_NONBLOCK); + return os_read(fd, buf, count); +} + ssize_t os_write(int fd, const void *buf, size_t count) { return write(fd, buf, count); diff --git a/drivers/serial/sandbox.c b/drivers/serial/sandbox.c index cb19401df6c..b73520ca940 100644 --- a/drivers/serial/sandbox.c +++ b/drivers/serial/sandbox.c @@ -30,6 +30,19 @@ #include #include +/* + * + * serial_buf: A buffer that holds keyboard characters for the + * Sandbox U-boot. + * + * invariants: + * serial_buf_write == serial_buf_read -> empty buffer + * (serial_buf_write + 1) % 16 == serial_buf_read -> full buffer + */ +static char serial_buf[16]; +static unsigned int serial_buf_write; +static unsigned int serial_buf_read; + static int sandbox_serial_init(void) { os_tty_raw(0); @@ -50,18 +63,37 @@ static void sandbox_serial_puts(const char *str) os_write(1, str, strlen(str)); } -static int sandbox_serial_getc(void) +static unsigned int increment_buffer_index(unsigned int index) +{ + return (index + 1) % ARRAY_SIZE(serial_buf); +} + +static int sandbox_serial_tstc(void) { - char buf; + const unsigned int next_index = + increment_buffer_index(serial_buf_write); ssize_t count; - count = os_read(0, &buf, 1); - return count == 1 ? buf : 0; + os_usleep(100); + if (next_index == serial_buf_read) + return 1; /* buffer full */ + + count = os_read_no_block(0, &serial_buf[serial_buf_write], 1); + if (count == 1) + serial_buf_write = next_index; + return serial_buf_write != serial_buf_read; } -static int sandbox_serial_tstc(void) +static int sandbox_serial_getc(void) { - return 0; + int result; + + while (!sandbox_serial_tstc()) + ; /* buffer empty */ + + result = serial_buf[serial_buf_read]; + serial_buf_read = increment_buffer_index(serial_buf_read); + return result; } static struct serial_device sandbox_serial_drv = { diff --git a/include/os.h b/include/os.h index 699682a4089..c452d1b56ef 100644 --- a/include/os.h +++ b/include/os.h @@ -39,6 +39,16 @@ struct sandbox_state; */ ssize_t os_read(int fd, void *buf, size_t count); +/** + * Access to the OS read() system call with non-blocking access + * + * \param fd File descriptor as returned by os_open() + * \param buf Buffer to place data + * \param count Number of bytes to read + * \return number of bytes read, or -1 on error + */ +ssize_t os_read_no_block(int fd, void *buf, size_t count); + /** * Access to the OS write() system call * -- cgit v1.3.1 From 4213fc2913722045eb2c327a64b99e3e3178aa5c Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Sun, 24 Feb 2013 17:33:14 +0000 Subject: sandbox: Add un/map_sysmen() to deal with sandbox's ram_buf Sandbox doesn't actually provide U-Boot access to the machine's physical memory. Instead it provides a RAM buffer of configurable size, and all memory accesses are within that buffer. Sandbox memory starts at 0 and is CONFIG_DRAM_SIZE bytes in size. Allowing access outside this buffer might produce unpredictable results in the event of an error, and would expose the host machine's memory architecture to the sandbox U-Boot. Most U-Boot functions assume that they can just access memory at given address. For sandbox this is not true. Add a map_sysmem() call which converts a U-Boot address to a system address. In most cases this is a NOP, but for sandbox it returns a pointer to that memory inside the RAM buffer. To get a U-Boot feature to work correctly within sandbox, you should call map_sysmem() to get a pointer to the address, and then use that address for any U-Boot memory accesses. Signed-off-by: Simon Glass --- README | 9 +++++++++ arch/sandbox/config.mk | 1 + arch/sandbox/include/asm/io.h | 10 ++++++++++ include/common.h | 12 ++++++++++++ 4 files changed, 32 insertions(+) (limited to 'include') diff --git a/README b/README index 0070694438c..51eb71b27c5 100644 --- a/README +++ b/README @@ -3811,6 +3811,15 @@ Low Level (hardware related) configuration options: that is executed before the actual U-Boot. E.g. when compiling a NAND SPL. +- CONFIG_ARCH_MAP_SYSMEM + Generally U-Boot (and in particular the md command) uses + effective address. It is therefore not necessary to regard + U-Boot address as virtual addresses that need to be translated + to physical addresses. However, sandbox requires this, since + it maintains its own little RAM buffer which contains all + addressable memory. This option causes some memory accesses + to be mapped through map_sysmem() / unmap_sysmem(). + - CONFIG_USE_ARCH_MEMCPY CONFIG_USE_ARCH_MEMSET If these options are used a optimized version of memcpy/memset will diff --git a/arch/sandbox/config.mk b/arch/sandbox/config.mk index 02ce4a44109..4fd0d4e58f9 100644 --- a/arch/sandbox/config.mk +++ b/arch/sandbox/config.mk @@ -18,4 +18,5 @@ # MA 02111-1307 USA PLATFORM_CPPFLAGS += -DCONFIG_SANDBOX -D__SANDBOX__ -U_FORTIFY_SOURCE +PLATFORM_CPPFLAGS += -DCONFIG_ARCH_MAP_SYSMEM PLATFORM_LIBS += -lrt diff --git a/arch/sandbox/include/asm/io.h b/arch/sandbox/include/asm/io.h index 0392d218ec2..d8c02364d9e 100644 --- a/arch/sandbox/include/asm/io.h +++ b/arch/sandbox/include/asm/io.h @@ -39,3 +39,13 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags) { } + +/* For sandbox, we want addresses to point into our RAM buffer */ +static inline void *map_sysmem(phys_addr_t paddr, unsigned long len) +{ + return map_physmem(paddr, len, MAP_WRBACK); +} + +static inline void unmap_sysmem(const void *vaddr) +{ +} diff --git a/include/common.h b/include/common.h index 170f4391a67..1d0728f847d 100644 --- a/include/common.h +++ b/include/common.h @@ -870,6 +870,18 @@ int cpu_disable(int nr); int cpu_release(int nr, int argc, char * const argv[]); #endif +/* Define a null map_sysmem() if the architecture doesn't use it */ +# ifndef CONFIG_ARCH_MAP_SYSMEM +static inline void *map_sysmem(phys_addr_t paddr, unsigned long len) +{ + return (void *)(uintptr_t)paddr; +} + +static inline void unmap_sysmem(const void *vaddr) +{ +} +# endif + #endif /* __ASSEMBLY__ */ #ifdef CONFIG_PPC -- cgit v1.3.1 From bfc59966431e6335fd5be0589eec073902cc7bb3 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Sun, 24 Feb 2013 17:33:21 +0000 Subject: Update set_working_fdt_addr() to use setenv_addr() We might as well use this common function instead of repeating the same code. Signed-off-by: Simon Glass --- common/cmd_fdt.c | 11 ++--------- common/cmd_nvedit.c | 8 ++++---- include/common.h | 14 +++++++++++++- 3 files changed, 19 insertions(+), 14 deletions(-) (limited to 'include') diff --git a/common/cmd_fdt.c b/common/cmd_fdt.c index 6eec947fcb3..ac77a08b77d 100644 --- a/common/cmd_fdt.c +++ b/common/cmd_fdt.c @@ -55,12 +55,8 @@ struct fdt_header *working_fdt; void set_working_fdt_addr(void *addr) { - char buf[17]; - working_fdt = addr; - - sprintf(buf, "%lx", (unsigned long)addr); - setenv("fdtaddr", buf); + setenv_addr("fdtaddr", addr); } /* @@ -347,10 +343,7 @@ static int do_fdt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } if (subcmd[0] == 's') { /* get the num nodes at this level */ - char buf[11]; - - sprintf(buf, "%d", curIndex + 1); - setenv(var, buf); + setenv_ulong(var, curIndex + 1); } else { /* node index not found */ printf("libfdt node not found\n"); diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c index 7633f0c44a7..44e88aa401a 100644 --- a/common/cmd_nvedit.c +++ b/common/cmd_nvedit.c @@ -295,17 +295,17 @@ int setenv_ulong(const char *varname, ulong value) } /** - * Set an environment variable to an address in hex + * Set an environment variable to an value in hex * * @param varname Environmet variable to set - * @param addr Value to set it to + * @param value Value to set it to * @return 0 if ok, 1 on error */ -int setenv_addr(const char *varname, const void *addr) +int setenv_hex(const char *varname, ulong value) { char str[17]; - sprintf(str, "%lx", (uintptr_t)addr); + sprintf(str, "%lx", value); return setenv(varname, str); } diff --git a/include/common.h b/include/common.h index 1d0728f847d..6d529242259 100644 --- a/include/common.h +++ b/include/common.h @@ -358,7 +358,19 @@ int getenv_yesno(const char *var); int saveenv (void); int setenv (const char *, const char *); int setenv_ulong(const char *varname, ulong value); -int setenv_addr(const char *varname, const void *addr); +int setenv_hex(const char *varname, ulong value); +/** + * setenv_addr - Set an environment variable to an address in hex + * + * @varname: Environmet variable to set + * @addr: Value to set it to + * @return 0 if ok, 1 on error + */ +static inline int setenv_addr(const char *varname, const void *addr) +{ + return setenv_hex(varname, (ulong)addr); +} + #ifdef CONFIG_ARM # include # include -- cgit v1.3.1 From d5b76673a5dfe0b5250baea3c36cdfa7a9fd5230 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Sun, 24 Feb 2013 17:33:26 +0000 Subject: hash: Add a flag to support saving hashes in the environment Some hashing commands permit saving the hash in an environment variable, and verifying a hash from there. But the crc32 command does not support this. In order to permit crc32 to use the generic hashing infrastructure, add a flag to select which behaviour to use. Signed-off-by: Simon Glass --- common/cmd_hash.c | 8 +++--- common/cmd_sha1sum.c | 6 ++--- common/hash.c | 69 +++++++++++++++++++++++++++++++++++++++------------- include/hash.h | 9 +++++-- 4 files changed, 66 insertions(+), 26 deletions(-) (limited to 'include') diff --git a/common/cmd_hash.c b/common/cmd_hash.c index eb6a33873b4..8c03b5c7238 100644 --- a/common/cmd_hash.c +++ b/common/cmd_hash.c @@ -30,22 +30,22 @@ static int do_hash(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { #ifdef CONFIG_HASH_VERIFY - int verify = 0; + int flags = HASH_FLAG_ENV; if (argc < 4) return CMD_RET_USAGE; if (!strcmp(argv[1], "-v")) { - verify = 1; + flags |= HASH_FLAG_VERIFY; argc--; argv++; } #else - const int verify = 0; + const int flags = HASH_FLAG_ENV; #endif /* Move forward to 'algorithm' parameter */ argc--; argv++; - return hash_command(*argv, verify, cmdtp, flag, argc - 1, argv + 1); + return hash_command(*argv, flags, cmdtp, flag, argc - 1, argv + 1); } #ifdef CONFIG_HASH_VERIFY diff --git a/common/cmd_sha1sum.c b/common/cmd_sha1sum.c index fe927ab248f..9f08629b878 100644 --- a/common/cmd_sha1sum.c +++ b/common/cmd_sha1sum.c @@ -31,7 +31,7 @@ int do_sha1sum(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - int verify = 0; + int flags = HASH_FLAG_ENV; int ac; char * const *av; @@ -42,13 +42,13 @@ int do_sha1sum(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) ac = argc - 1; #ifdef CONFIG_SHA1SUM_VERIFY if (strcmp(*av, "-v") == 0) { - verify = 1; + flags |= HASH_FLAG_VERIFY; av++; ac--; } #endif - return hash_command("sha1", verify, cmdtp, flag, ac, av); + return hash_command("sha1", flags, cmdtp, flag, ac, av); } #ifdef CONFIG_SHA1SUM_VERIFY diff --git a/common/hash.c b/common/hash.c index e3a6e438a3b..462853d1729 100644 --- a/common/hash.c +++ b/common/hash.c @@ -58,19 +58,31 @@ static struct hash_algo hash_algo[] = { * @algo: Hash algorithm being used * @sum: Hash digest (algo->digest_size bytes) * @dest: Destination, interpreted as a hex address if it starts - * with * or otherwise as an environment variable. + * with * (or allow_env_vars is 0) or otherwise as an + * environment variable. + * @allow_env_vars: non-zero to permit storing the result to an + * variable environment */ static void store_result(struct hash_algo *algo, const u8 *sum, - const char *dest) + const char *dest, int allow_env_vars) { unsigned int i; + int env_var = 0; - if (*dest == '*') { - u8 *ptr; + /* + * If environment variables are allowed, then we assume that 'dest' + * is an environment variable, unless it starts with *, in which + * case we assume it is an address. If not allowed, it is always an + * address. This is to support the crc32 command. + */ + if (allow_env_vars) { + if (*dest == '*') + dest++; + else + env_var = 1; + } - ptr = (u8 *)simple_strtoul(dest + 1, NULL, 16); - memcpy(ptr, sum, algo->digest_size); - } else { + if (env_var) { char str_output[HASH_MAX_DIGEST_SIZE * 2 + 1]; char *str_ptr = str_output; @@ -80,6 +92,11 @@ static void store_result(struct hash_algo *algo, const u8 *sum, } str_ptr = '\0'; setenv(dest, str_output); + } else { + u8 *ptr; + + ptr = (u8 *)simple_strtoul(dest, NULL, 16); + memcpy(ptr, sum, algo->digest_size); } } @@ -94,14 +111,28 @@ static void store_result(struct hash_algo *algo, const u8 *sum, * Otherwise we assume it is an environment variable, and * look up its value (it must contain a hex digest). * @vsum: Returns binary digest value (algo->digest_size bytes) + * @allow_env_vars: non-zero to permit storing the result to an environment + * variable. If 0 then verify_str is assumed to be an + * address, and the * prefix is not expected. * @return 0 if ok, non-zero on error */ -static int parse_verify_sum(struct hash_algo *algo, char *verify_str, u8 *vsum) +static int parse_verify_sum(struct hash_algo *algo, char *verify_str, u8 *vsum, + int allow_env_vars) { - if (*verify_str == '*') { + int env_var = 0; + + /* See comment above in store_result() */ + if (allow_env_vars) { + if (*verify_str == '*') + verify_str++; + else + env_var = 1; + } + + if (env_var) { u8 *ptr; - ptr = (u8 *)simple_strtoul(verify_str + 1, NULL, 16); + ptr = (u8 *)simple_strtoul(verify_str, NULL, 16); memcpy(vsum, ptr, algo->digest_size); } else { unsigned int i; @@ -158,7 +189,7 @@ static void show_hash(struct hash_algo *algo, ulong addr, ulong len, printf("%02x", output[i]); } -int hash_command(const char *algo_name, int verify, cmd_tbl_t *cmdtp, int flag, +int hash_command(const char *algo_name, int flags, cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { struct hash_algo *algo; @@ -169,13 +200,14 @@ int hash_command(const char *algo_name, int verify, cmd_tbl_t *cmdtp, int flag, if (argc < 2) return CMD_RET_USAGE; + addr = simple_strtoul(*argv++, NULL, 16); + len = simple_strtoul(*argv++, NULL, 16); + algo = find_hash_algo(algo_name); if (!algo) { printf("Unknown hash algorithm '%s'\n", algo_name); return CMD_RET_USAGE; } - addr = simple_strtoul(*argv++, NULL, 16); - len = simple_strtoul(*argv++, NULL, 16); argc -= 2; if (algo->digest_size > HASH_MAX_DIGEST_SIZE) { @@ -188,13 +220,14 @@ int hash_command(const char *algo_name, int verify, cmd_tbl_t *cmdtp, int flag, /* Try to avoid code bloat when verify is not needed */ #ifdef CONFIG_HASH_VERIFY - if (verify) { + if (flags & HASH_FLAG_VERIFY) { #else if (0) { #endif if (!argc) return CMD_RET_USAGE; - if (parse_verify_sum(algo, *argv, vsum)) { + if (parse_verify_sum(algo, *argv, vsum, + flags & HASH_FLAG_ENV)) { printf("ERROR: %s does not contain a valid %s sum\n", *argv, algo->name); return 1; @@ -213,8 +246,10 @@ int hash_command(const char *algo_name, int verify, cmd_tbl_t *cmdtp, int flag, show_hash(algo, addr, len, output); printf("\n"); - if (argc) - store_result(algo, output, *argv); + if (argc) { + store_result(algo, output, *argv, + flags & HASH_FLAG_ENV); + } } return 0; diff --git a/include/hash.h b/include/hash.h index 34ba558bd09..88fa2b5a577 100644 --- a/include/hash.h +++ b/include/hash.h @@ -51,19 +51,24 @@ struct hash_algo { */ #define HASH_MAX_DIGEST_SIZE 32 +enum { + HASH_FLAG_VERIFY = 1 << 0, /* Enable verify mode */ + HASH_FLAG_ENV = 1 << 1, /* Allow env vars */ +}; + /** * hash_command: Process a hash command for a particular algorithm * * This common function is used to implement specific hash commands. * * @algo_name: Hash algorithm being used - * @verify: Non-zero to enable verify mode + * @flags: Flags value (HASH_FLAG_...) * @cmdtp: Pointer to command table entry * @flag: Some flags normally 0 (see CMD_FLAG_.. above) * @argc: Number of arguments (arg 0 must be the command text) * @argv: Arguments */ -int hash_command(const char *algo_name, int verify, cmd_tbl_t *cmdtp, int flag, +int hash_command(const char *algo_name, int flags, cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); #endif -- cgit v1.3.1 From d20a40de9db07de1f1f06a79a4da1cdda5379b75 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Sun, 24 Feb 2013 20:30:22 +0000 Subject: Roll crc32 into hash infrastructure Add the CRC32 algorithm to the list of available hashes, and make the crc32 command use hash_command(). Add a new crc32_wd_buf() to make this possible, which puts its result in a buffer rather than returning it as a 32-bit value. Note: For some boards the hash command is not enabled, neither are sha1, sha256 or the verify option. In this case the full hash implementation adds about 500 bytes of overhead. So as a special case, we use #ifdef to select very simple bahaviour in that case. The justification for this is that it is currently a very common case (virtually all boards enable crc32 but only some enable more advanced features). Signed-off-by: Simon Glass --- common/cmd_mem.c | 75 +++----------------------------- common/hash.c | 118 ++++++++++++++++++++++++++++++++++----------------- include/hash.h | 2 +- include/u-boot/crc.h | 11 +++++ lib/crc32.c | 9 ++++ 5 files changed, 108 insertions(+), 107 deletions(-) (limited to 'include') diff --git a/common/cmd_mem.c b/common/cmd_mem.c index 12dbc1609c3..95b49b21005 100644 --- a/common/cmd_mem.c +++ b/common/cmd_mem.c @@ -32,6 +32,7 @@ #ifdef CONFIG_HAS_DATAFLASH #include #endif +#include #include #include #include @@ -1098,89 +1099,27 @@ mod_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const argv[]) #ifdef CONFIG_CMD_CRC32 -#ifndef CONFIG_CRC32_VERIFY - static int do_mem_crc(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - ulong addr, length; - ulong crc; - ulong *ptr; - - if (argc < 3) - return CMD_RET_USAGE; - - addr = simple_strtoul (argv[1], NULL, 16); - addr += base_address; - - length = simple_strtoul (argv[2], NULL, 16); - - crc = crc32_wd (0, (const uchar *) addr, length, CHUNKSZ_CRC32); - - printf ("CRC32 for %08lx ... %08lx ==> %08lx\n", - addr, addr + length - 1, crc); - - if (argc > 3) { - ptr = (ulong *) simple_strtoul (argv[3], NULL, 16); - *ptr = crc; - } - - return 0; -} - -#else /* CONFIG_CRC32_VERIFY */ - -int do_mem_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - ulong addr, length; - ulong crc; - ulong *ptr; - ulong vcrc; - int verify; + int flags = 0; int ac; char * const *av; - if (argc < 3) { -usage: + if (argc < 3) return CMD_RET_USAGE; - } av = argv + 1; ac = argc - 1; +#ifdef CONFIG_HASH_VERIFY if (strcmp(*av, "-v") == 0) { - verify = 1; + flags |= HASH_FLAG_VERIFY; av++; ac--; - if (ac < 3) - goto usage; - } else - verify = 0; - - addr = simple_strtoul(*av++, NULL, 16); - addr += base_address; - length = simple_strtoul(*av++, NULL, 16); - - crc = crc32_wd (0, (const uchar *) addr, length, CHUNKSZ_CRC32); - - if (!verify) { - printf ("CRC32 for %08lx ... %08lx ==> %08lx\n", - addr, addr + length - 1, crc); - if (ac > 2) { - ptr = (ulong *) simple_strtoul (*av++, NULL, 16); - *ptr = crc; - } - } else { - vcrc = simple_strtoul(*av++, NULL, 16); - if (vcrc != crc) { - printf ("CRC32 for %08lx ... %08lx ==> %08lx != %08lx ** ERROR **\n", - addr, addr + length - 1, crc, vcrc); - return 1; - } } +#endif - return 0; - + return hash_command("crc32", flags, cmdtp, flag, ac, av); } -#endif /* CONFIG_CRC32_VERIFY */ #endif diff --git a/common/hash.c b/common/hash.c index 462853d1729..ef6fe375d28 100644 --- a/common/hash.c +++ b/common/hash.c @@ -34,13 +34,19 @@ * crypto could perhaps add named version of these algorithms here. */ static struct hash_algo hash_algo[] = { -#ifdef CONFIG_SHA1 + /* + * This is CONFIG_CMD_SHA1SUM instead of CONFIG_SHA1 since otherwise + * it bloats the code for boards which use SHA1 but not the 'hash' + * or 'sha1sum' commands. + */ +#ifdef CONFIG_CMD_SHA1SUM { "SHA1", SHA1_SUM_LEN, sha1_csum_wd, CHUNKSZ_SHA1, }, +#define MULTI_HASH #endif #ifdef CONFIG_SHA256 { @@ -49,9 +55,27 @@ static struct hash_algo hash_algo[] = { sha256_csum_wd, CHUNKSZ_SHA256, }, +#define MULTI_HASH #endif + { + "CRC32", + 4, + crc32_wd_buf, + CHUNKSZ_CRC32, + }, }; +#if defined(CONFIG_HASH_VERIFY) || defined(CONFIG_CMD_HASH) +#define MULTI_HASH +#endif + +/* Try to minimize code size for boards that don't want much hashing */ +#ifdef MULTI_HASH +#define multi_hash() 1 +#else +#define multi_hash() 0 +#endif + /** * store_result: Store the resulting sum to an address or variable * @@ -192,10 +216,7 @@ static void show_hash(struct hash_algo *algo, ulong addr, ulong len, int hash_command(const char *algo_name, int flags, cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - struct hash_algo *algo; ulong addr, len; - u8 output[HASH_MAX_DIGEST_SIZE]; - u8 vsum[HASH_MAX_DIGEST_SIZE]; if (argc < 2) return CMD_RET_USAGE; @@ -203,52 +224,73 @@ int hash_command(const char *algo_name, int flags, cmd_tbl_t *cmdtp, int flag, addr = simple_strtoul(*argv++, NULL, 16); len = simple_strtoul(*argv++, NULL, 16); - algo = find_hash_algo(algo_name); - if (!algo) { - printf("Unknown hash algorithm '%s'\n", algo_name); - return CMD_RET_USAGE; - } - argc -= 2; + if (multi_hash()) { + struct hash_algo *algo; + u8 output[HASH_MAX_DIGEST_SIZE]; + u8 vsum[HASH_MAX_DIGEST_SIZE]; - if (algo->digest_size > HASH_MAX_DIGEST_SIZE) { - puts("HASH_MAX_DIGEST_SIZE exceeded\n"); - return 1; - } + algo = find_hash_algo(algo_name); + if (!algo) { + printf("Unknown hash algorithm '%s'\n", algo_name); + return CMD_RET_USAGE; + } + argc -= 2; + + if (algo->digest_size > HASH_MAX_DIGEST_SIZE) { + puts("HASH_MAX_DIGEST_SIZE exceeded\n"); + return 1; + } - algo->hash_func_ws((const unsigned char *)addr, len, output, - algo->chunk_size); + algo->hash_func_ws((const unsigned char *)addr, len, output, + algo->chunk_size); - /* Try to avoid code bloat when verify is not needed */ + /* Try to avoid code bloat when verify is not needed */ #ifdef CONFIG_HASH_VERIFY - if (flags & HASH_FLAG_VERIFY) { + if (flags & HASH_FLAG_VERIFY) { #else - if (0) { + if (0) { #endif - if (!argc) - return CMD_RET_USAGE; - if (parse_verify_sum(algo, *argv, vsum, + if (!argc) + return CMD_RET_USAGE; + if (parse_verify_sum(algo, *argv, vsum, flags & HASH_FLAG_ENV)) { - printf("ERROR: %s does not contain a valid %s sum\n", - *argv, algo->name); - return 1; - } - if (memcmp(output, vsum, algo->digest_size) != 0) { - int i; + printf("ERROR: %s does not contain a valid " + "%s sum\n", *argv, algo->name); + return 1; + } + if (memcmp(output, vsum, algo->digest_size) != 0) { + int i; + show_hash(algo, addr, len, output); + printf(" != "); + for (i = 0; i < algo->digest_size; i++) + printf("%02x", vsum[i]); + puts(" ** ERROR **\n"); + return 1; + } + } else { show_hash(algo, addr, len, output); - printf(" != "); - for (i = 0; i < algo->digest_size; i++) - printf("%02x", vsum[i]); - puts(" ** ERROR **\n"); - return 1; + printf("\n"); + + if (argc) { + store_result(algo, output, *argv, + flags & HASH_FLAG_ENV); + } } + + /* Horrible code size hack for boards that just want crc32 */ } else { - show_hash(algo, addr, len, output); - printf("\n"); + ulong crc; + ulong *ptr; + + crc = crc32_wd(0, (const uchar *)addr, len, CHUNKSZ_CRC32); + + printf("CRC32 for %08lx ... %08lx ==> %08lx\n", + addr, addr + len - 1, crc); - if (argc) { - store_result(algo, output, *argv, - flags & HASH_FLAG_ENV); + if (argc > 3) { + ptr = (ulong *)simple_strtoul(argv[3], NULL, 16); + *ptr = crc; } } diff --git a/include/hash.h b/include/hash.h index 88fa2b5a577..f2b2c4520de 100644 --- a/include/hash.h +++ b/include/hash.h @@ -22,7 +22,7 @@ #ifndef _HASH_H #define _HASH_H -#ifdef CONFIG_SHA1SUM_VERIFY +#if defined(CONFIG_SHA1SUM_VERIFY) || defined(CONFIG_CRC32_VERIFY) #define CONFIG_HASH_VERIFY #endif diff --git a/include/u-boot/crc.h b/include/u-boot/crc.h index 07badbfc5a9..08e509edb4e 100644 --- a/include/u-boot/crc.h +++ b/include/u-boot/crc.h @@ -30,4 +30,15 @@ uint32_t crc32 (uint32_t, const unsigned char *, uint); uint32_t crc32_wd (uint32_t, const unsigned char *, uint, uint); uint32_t crc32_no_comp (uint32_t, const unsigned char *, uint); +/** + * crc32_wd_buf - Perform CRC32 on a buffer and return result in buffer + * + * @input: Input buffer + * @ilen: Input buffer length + * @output: Place to put checksum result (4 bytes) + * @chunk_sz: Trigger watchdog after processing this many bytes + */ +void crc32_wd_buf(const unsigned char *input, uint ilen, + unsigned char *output, uint chunk_sz); + #endif /* _UBOOT_CRC_H */ diff --git a/lib/crc32.c b/lib/crc32.c index 27335a3ed90..76205da4f30 100644 --- a/lib/crc32.c +++ b/lib/crc32.c @@ -249,3 +249,12 @@ uint32_t ZEXPORT crc32_wd (uint32_t crc, return crc; } + +void crc32_wd_buf(const unsigned char *input, unsigned int ilen, + unsigned char *output, unsigned int chunk_sz) +{ + uint32_t crc; + + crc = crc32_wd(0, input, ilen, chunk_sz); + memcpy(output, &crc, sizeof(crc)); +} -- cgit v1.3.1 From ecdbf419f9c979cb6417df261c324c5beb63300d Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Sun, 24 Feb 2013 20:29:23 +0000 Subject: sandbox: config: Enable hash functions and mtest Enable the hash command and sha1/256 hashing for sandbox. Also use a better address for memory testing (since the existing one is set up for linux host memory space). Signed-off-by: Simon Glass --- include/configs/sandbox.h | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index 9c431bf27ad..9f51a0b813e 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -63,8 +63,8 @@ #define CONFIG_SYS_HZ 1000 /* Memory things - we don't really want a memory test */ -#define CONFIG_SYS_LOAD_ADDR 0x10000000 -#define CONFIG_SYS_MEMTEST_START 0x10000000 +#define CONFIG_SYS_LOAD_ADDR 0x00000000 +#define CONFIG_SYS_MEMTEST_START 0x00100000 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x1000) #define CONFIG_PHYS_64BIT @@ -85,6 +85,11 @@ #undef CONFIG_CMD_NET #undef CONFIG_CMD_NFS +#define CONFIG_CMD_HASH +#define CONFIG_HASH_VERIFY +#define CONFIG_SHA1 +#define CONFIG_SHA256 + #define CONFIG_BOOTARGS "" #define CONFIG_EXTRA_ENV_SETTINGS "stdin=serial\0" \ -- cgit v1.3.1 From 218da0f35f4b5e5bf13d3dba6d975d4d5d65516f Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Sun, 24 Feb 2013 17:33:32 +0000 Subject: hash: Use lower case for hash algorithm names Rather than use strcasecmp() in the hash algorithm search, require the caller to do this first. Most of U-Boot can use lower case anyway, and the hash command can convert to lower case before calling hash_command(). This saves needing strcasecmp() for boards that use hashing but not the hash command. Signed-off-by: Simon Glass --- common/cmd_hash.c | 4 ++++ common/hash.c | 11 ++++++----- include/hash.h | 2 +- 3 files changed, 11 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/common/cmd_hash.c b/common/cmd_hash.c index 8c03b5c7238..4fe0e786136 100644 --- a/common/cmd_hash.c +++ b/common/cmd_hash.c @@ -26,9 +26,11 @@ #include #include #include +#include static int do_hash(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { + char *s; #ifdef CONFIG_HASH_VERIFY int flags = HASH_FLAG_ENV; @@ -45,6 +47,8 @@ static int do_hash(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) /* Move forward to 'algorithm' parameter */ argc--; argv++; + for (s = *argv; *s; s++) + *s = tolower(*s); return hash_command(*argv, flags, cmdtp, flag, argc - 1, argv + 1); } diff --git a/common/hash.c b/common/hash.c index 0d04c4c9a0c..f5badcb9300 100644 --- a/common/hash.c +++ b/common/hash.c @@ -32,7 +32,8 @@ /* * These are the hash algorithms we support. Chips which support accelerated - * crypto could perhaps add named version of these algorithms here. + * crypto could perhaps add named version of these algorithms here. Note that + * algorithm names must be in lower case. */ static struct hash_algo hash_algo[] = { /* @@ -42,7 +43,7 @@ static struct hash_algo hash_algo[] = { */ #ifdef CONFIG_CMD_SHA1SUM { - "SHA1", + "sha1", SHA1_SUM_LEN, sha1_csum_wd, CHUNKSZ_SHA1, @@ -51,7 +52,7 @@ static struct hash_algo hash_algo[] = { #endif #ifdef CONFIG_SHA256 { - "SHA256", + "sha256", SHA256_SUM_LEN, sha256_csum_wd, CHUNKSZ_SHA256, @@ -59,7 +60,7 @@ static struct hash_algo hash_algo[] = { #define MULTI_HASH #endif { - "CRC32", + "crc32", 4, crc32_wd_buf, CHUNKSZ_CRC32, @@ -202,7 +203,7 @@ static struct hash_algo *find_hash_algo(const char *name) int i; for (i = 0; i < ARRAY_SIZE(hash_algo); i++) { - if (!strcasecmp(name, hash_algo[i].name)) + if (!strcmp(name, hash_algo[i].name)) return &hash_algo[i]; } diff --git a/include/hash.h b/include/hash.h index f2b2c4520de..2dbbd9b7d57 100644 --- a/include/hash.h +++ b/include/hash.h @@ -61,7 +61,7 @@ enum { * * This common function is used to implement specific hash commands. * - * @algo_name: Hash algorithm being used + * @algo_name: Hash algorithm being used (lower case!) * @flags: Flags value (HASH_FLAG_...) * @cmdtp: Pointer to command table entry * @flag: Some flags normally 0 (see CMD_FLAG_.. above) -- cgit v1.3.1 From 30372965d3d5d42258ebc39d7d06522b4c18472a Mon Sep 17 00:00:00 2001 From: Stefano Babic Date: Sat, 23 Feb 2013 00:53:26 +0000 Subject: OMAP3: drop CONFIG_SPL_OS_BOOT_KEY and use local define CONFIG_SPL_OS_BOOT_KEY is used only in board files. It is not required to have a general CONFIG_ option. Rename it and define it in board directory. Signed-off-by: Stefano Babic Reviewed-by: Tom Rini --- board/technexion/twister/twister.c | 8 ++++---- board/technexion/twister/twister.h | 2 ++ board/timll/devkit8000/devkit8000.c | 8 ++++---- board/timll/devkit8000/devkit8000.h | 3 +++ include/configs/devkit8000.h | 1 - include/configs/twister.h | 1 - 6 files changed, 13 insertions(+), 10 deletions(-) (limited to 'include') diff --git a/board/technexion/twister/twister.c b/board/technexion/twister/twister.c index c9eea9b3045..fa0ace019ae 100644 --- a/board/technexion/twister/twister.c +++ b/board/technexion/twister/twister.c @@ -165,10 +165,10 @@ void spl_board_prepare_for_linux(void) int spl_start_uboot(void) { int val = 0; - if (!gpio_request(CONFIG_SPL_OS_BOOT_KEY, "U-Boot key")) { - gpio_direction_input(CONFIG_SPL_OS_BOOT_KEY); - val = gpio_get_value(CONFIG_SPL_OS_BOOT_KEY); - gpio_free(CONFIG_SPL_OS_BOOT_KEY); + if (!gpio_request(SPL_OS_BOOT_KEY, "U-Boot key")) { + gpio_direction_input(SPL_OS_BOOT_KEY); + val = gpio_get_value(SPL_OS_BOOT_KEY); + gpio_free(SPL_OS_BOOT_KEY); } return val; } diff --git a/board/technexion/twister/twister.h b/board/technexion/twister/twister.h index a2051c00442..cff479c07f6 100644 --- a/board/technexion/twister/twister.h +++ b/board/technexion/twister/twister.h @@ -38,6 +38,8 @@ const omap3_sysinfo sysinfo = { #define XR16L2751_UART1_BASE 0x21000000 #define XR16L2751_UART2_BASE 0x23000000 +/* GPIO used to select between U-Boot and kernel */ +#define SPL_OS_BOOT_KEY 55 /* * IEN - Input Enable diff --git a/board/timll/devkit8000/devkit8000.c b/board/timll/devkit8000/devkit8000.c index 85685ee7c05..b88d9783cb6 100644 --- a/board/timll/devkit8000/devkit8000.c +++ b/board/timll/devkit8000/devkit8000.c @@ -172,10 +172,10 @@ void spl_board_prepare_for_linux(void) int spl_start_uboot(void) { int val = 0; - if (!gpio_request(CONFIG_SPL_OS_BOOT_KEY, "U-Boot key")) { - gpio_direction_input(CONFIG_SPL_OS_BOOT_KEY); - val = gpio_get_value(CONFIG_SPL_OS_BOOT_KEY); - gpio_free(CONFIG_SPL_OS_BOOT_KEY); + if (!gpio_request(SPL_OS_BOOT_KEY, "U-Boot key")) { + gpio_direction_input(SPL_OS_BOOT_KEY); + val = gpio_get_value(SPL_OS_BOOT_KEY); + gpio_free(SPL_OS_BOOT_KEY); } return !val; } diff --git a/board/timll/devkit8000/devkit8000.h b/board/timll/devkit8000/devkit8000.h index aa69e6c965d..c1965e27048 100644 --- a/board/timll/devkit8000/devkit8000.h +++ b/board/timll/devkit8000/devkit8000.h @@ -32,6 +32,9 @@ const omap3_sysinfo sysinfo = { "NAND", }; +/* GPIO used to select between U-Boot and kernel */ +#define SPL_OS_BOOT_KEY 26 + /* * IEN - Input Enable * IDIS - Input Disable diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index d926f740263..788227d79d0 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -354,7 +354,6 @@ /* SPL OS boot options */ #define CONFIG_SPL_OS_BOOT -#define CONFIG_SPL_OS_BOOT_KEY 26 #define CONFIG_CMD_SPL #define CONFIG_CMD_SPL_WRITE_SIZE 0x400 /* 1024 byte */ diff --git a/include/configs/twister.h b/include/configs/twister.h index a8524816a85..4205a11bca4 100644 --- a/include/configs/twister.h +++ b/include/configs/twister.h @@ -58,7 +58,6 @@ #define CONFIG_CMD_SPL_NAND_OFS (CONFIG_SYS_NAND_SPL_KERNEL_OFFS+\ 0x600000) #define CONFIG_SPL_OS_BOOT -#define CONFIG_SPL_OS_BOOT_KEY 55 #define CONFIG_SYS_SPL_ARGS_ADDR (PHYS_SDRAM_1 + 0x100) #define CONFIG_SPL_BOARD_INIT -- cgit v1.3.1 From 320ec9dfb72219116f1879d1be0d49e7d3baaad8 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Thu, 16 Aug 2012 12:08:31 +0800 Subject: blackfin: bf60x: add board and headers files to support bf609 Board and config header files for bf609-ezkit support. Signed-off-by: Bob Liu Signed-off-by: Sonic Zhang Signed-off-by: Sonic Zhang --- MAINTAINERS | 3 +- board/bf609-ezkit/Makefile | 55 +++++++++++++ board/bf609-ezkit/bf609-ezkit.c | 67 ++++++++++++++++ boards.cfg | 1 + include/configs/bf609-ezkit.h | 161 ++++++++++++++++++++++++++++++++++++++ include/configs/bfin_adi_common.h | 8 +- 6 files changed, 291 insertions(+), 4 deletions(-) create mode 100644 board/bf609-ezkit/Makefile create mode 100644 board/bf609-ezkit/bf609-ezkit.c create mode 100644 include/configs/bf609-ezkit.h (limited to 'include') diff --git a/MAINTAINERS b/MAINTAINERS index 45e2dd45411..8603085f304 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1226,7 +1226,7 @@ Yoshihiro Shimoda # Board CPU # ######################################################################### -Mike Frysinger +Sonic Zhang Blackfin Team BF506F-EZKIT BF506 @@ -1243,6 +1243,7 @@ Blackfin Team BF538F-EZKIT BF538 BF548-EZKIT BF548 BF561-EZKIT BF561 + BF609-EZKIT BF609 M.Hasewinkel (MHA) diff --git a/board/bf609-ezkit/Makefile b/board/bf609-ezkit/Makefile new file mode 100644 index 00000000000..0bb8fe643ea --- /dev/null +++ b/board/bf609-ezkit/Makefile @@ -0,0 +1,55 @@ +# +# U-boot - Makefile +# +# Copyright (c) 2005-2008 Analog Device Inc. +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS-y := $(BOARD).o +COBJS-$(CONFIG_BFIN_SOFT_SWITCH) += soft_switch.o + +SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS-y)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/bf609-ezkit/bf609-ezkit.c b/board/bf609-ezkit/bf609-ezkit.c new file mode 100644 index 00000000000..0388226db48 --- /dev/null +++ b/board/bf609-ezkit/bf609-ezkit.c @@ -0,0 +1,67 @@ +/* + * U-boot - main board file + * + * Copyright (c) 2008-2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include +#include +#include +#include "soft_switch.h" + +int checkboard(void) +{ + printf("Board: ADI BF609 EZ-Kit board\n"); + printf(" Support: http://blackfin.uclinux.org/\n"); + return 0; +} + +int board_early_init_f(void) +{ + static const unsigned short pins[] = { + P_A3, P_A4, P_A5, P_A6, P_A7, P_A8, P_A9, P_A10, P_A11, P_A12, + P_A13, P_A14, P_A15, P_A16, P_A17, P_A18, P_A19, P_A20, P_A21, + P_A22, P_A23, P_A24, P_A25, P_NORCK, 0, + }; + peripheral_request_list(pins, "smc0"); + + return 0; +} + +#ifdef CONFIG_DESIGNWARE_ETH +int board_eth_init(bd_t *bis) +{ + int ret = 0; + + if (CONFIG_DW_PORTS & 1) { + static const unsigned short pins[] = P_RMII0; + if (!peripheral_request_list(pins, "emac0")) + ret += designware_initialize(0, EMAC0_MACCFG, 1, 0); + } + if (CONFIG_DW_PORTS & 2) { + static const unsigned short pins[] = P_RMII1; + if (!peripheral_request_list(pins, "emac1")) + ret += designware_initialize(1, EMAC1_MACCFG, 1, 0); + } + + return ret; +} +#endif + +#ifdef CONFIG_BFIN_SDH +int board_mmc_init(bd_t *bis) +{ + return bfin_mmc_init(bis); +} +#endif + +/* miscellaneous platform dependent initialisations */ +int misc_init_r(void) +{ + printf("other init\n"); + return setup_board_switches(); +} diff --git a/boards.cfg b/boards.cfg index 7f772a08409..136ea0ae293 100644 --- a/boards.cfg +++ b/boards.cfg @@ -361,6 +361,7 @@ bf538f-ezkit blackfin blackfin bf548-ezkit blackfin blackfin bf561-acvilon blackfin blackfin bf561-ezkit blackfin blackfin +bf609-ezkit blackfin blackfin blackstamp blackfin blackfin blackvme blackfin blackfin br4 blackfin blackfin diff --git a/include/configs/bf609-ezkit.h b/include/configs/bf609-ezkit.h new file mode 100644 index 00000000000..6dffab86dc4 --- /dev/null +++ b/include/configs/bf609-ezkit.h @@ -0,0 +1,161 @@ +/* + * U-boot - Configuration file for BF609 EZ-Kit board + */ + +#ifndef __CONFIG_BF609_EZKIT_H__ +#define __CONFIG_BF609_EZKIT_H__ + +#include + +/* + * Processor Settings + */ +#define CONFIG_BFIN_CPU bf609-0.0 +#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA + + +/* For ez-board version 1.0, else undef this */ +#define CONFIG_BFIN_BOARD_VERSION_1_0 + +/* + * Clock Settings + * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV + * SCLK = (CLKIN * VCO_MULT) / SYSCLK_DIV + * SCLK0 = SCLK / SCLK0_DIV + * SCLK1 = SCLK / SCLK1_DIV + */ +/* CONFIG_CLKIN_HZ is any value in Hz */ +#define CONFIG_CLKIN_HZ (25000000) +/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ +/* 1 = CLKIN / 2 */ +#define CONFIG_CLKIN_HALF (0) + +/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ +/* Values can range from 0-127 (where 0 means 128) */ +#define CONFIG_VCO_MULT (20) + +/* CCLK_DIV controls the core clock divider */ +/* Values can range from 0-31 (where 0 means 32) */ +#define CONFIG_CCLK_DIV (1) +/* SCLK_DIV controls the system clock divider */ +/* Values can range from 0-31 (where 0 means 32) */ +#define CONFIG_SCLK_DIV (4) +/* Values can range from 0-7 (where 0 means 8) */ +#define CONFIG_SCLK0_DIV (1) +#define CONFIG_SCLK1_DIV (1) +/* DCLK_DIV controls the DDR clock divider */ +/* Values can range from 0-31 (where 0 means 32) */ +#define CONFIG_DCLK_DIV (2) +/* OCLK_DIV controls the output clock divider */ +/* Values can range from 0-127 (where 0 means 128) */ +#define CONFIG_OCLK_DIV (16) + +/* + * Memory Settings + */ +#define CONFIG_MEM_SIZE 128 + +#define CONFIG_SMC_GCTL_VAL 0x00000010 +#define CONFIG_SMC_B0CTL_VAL 0x01007011 +#define CONFIG_SMC_B0TIM_VAL 0x08170977 +#define CONFIG_SMC_B0ETIM_VAL 0x00092231 + +#define CONFIG_SYS_MONITOR_LEN (768 * 1024) +#define CONFIG_SYS_MALLOC_LEN (512 * 1024) + +/* + * Network Settings + */ +#define ADI_CMDS_NETWORK +#define CONFIG_NETCONSOLE +#define CONFIG_NET_MULTI +#define CONFIG_HOSTNAME "bf609-ezkit" +#define CONFIG_DESIGNWARE_ETH +#define CONFIG_DW_PORTS 1 +#define CONFIG_DW_AUTONEG +#define CONFIG_DW_ALTDESCRIPTOR +#define CONFIG_CMD_NET +#define CONFIG_CMD_MII +#define CONFIG_MII + +/* i2c Settings */ +#define CONFIG_BFIN_TWI_I2C +#define CONFIG_HARD_I2C + +/* + * Flash Settings + */ +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_JFFS2 +#define CONFIG_SYS_FLASH_CFI_WIDTH 2 +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_BASE 0xb0000000 +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_PROTECTION +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_SECT 131 +#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS + +/* + * SPI Settings + */ +#define CONFIG_BFIN_SPI6XX +#define CONFIG_ENV_SPI_MAX_HZ 25000000 +#define CONFIG_SF_DEFAULT_SPEED 25000000 +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_ALL + +/* + * Env Storage Settings + */ +#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_OFFSET 0x10000 +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x10000 +#define CONFIG_ENV_IS_EMBEDDED_IN_LDR +#elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND) +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0x60000 +#define CONFIG_ENV_SIZE 0x20000 +#else +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) +#define CONFIG_ENV_OFFSET 0x8000 +#define CONFIG_ENV_SIZE 0x8000 +#define CONFIG_ENV_SECT_SIZE 0x8000 +#define CONFIG_ENV_IS_EMBEDDED_IN_LDR +#endif + +#define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0xB0100000\0" + +/* + * SDH Settings + */ +#define CONFIG_GENERIC_MMC +#define CONFIG_MMC +#define CONFIG_BFIN_SDH + +/* + * Misc Settings + */ +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_UART_CONSOLE 0 + +#define CONFIG_CMD_MEMORY + +#define CONFIG_SYS_MEMTEST_END (CONFIG_STACKBASE - 20*1024*1024 + 4) +#define CONFIG_BFIN_SOFT_SWITCH + +#if 0 +#define CONFIG_UART_MEM 1024 +#undef CONFIG_UART_CONSOLE +#undef CONFIG_JTAG_CONSOLE +#undef CONFIG_UART_CONSOLE_IS_JTAG +#endif + +/* + * Pull in common ADI header for remaining command/environment setup + */ +#include +#endif diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h index ccdec0d5640..d3ae3a71cd7 100644 --- a/include/configs/bfin_adi_common.h +++ b/include/configs/bfin_adi_common.h @@ -10,7 +10,7 @@ */ #ifndef _CONFIG_CMD_DEFAULT_H # include -# if ADI_CMDS_NETWORK +# ifdef ADI_CMDS_NETWORK # define CONFIG_CMD_DHCP # define CONFIG_BOOTP_SUBNETMASK # define CONFIG_BOOTP_GATEWAY @@ -58,7 +58,7 @@ # endif # ifdef CONFIG_RTC_BFIN # define CONFIG_CMD_DATE -# if ADI_CMDS_NETWORK +# ifdef ADI_CMDS_NETWORK # define CONFIG_CMD_SNTP # endif # endif @@ -193,10 +193,12 @@ "nand erase 0 0x40000;" \ "nand write $(loadaddr) 0 0x40000" # else -# define UBOOT_ENV_UPDATE \ +# ifndef UBOOT_ENV_UPDATE +# define UBOOT_ENV_UPDATE \ "protect off 0x20000000 +$(filesize);" \ "erase 0x20000000 +$(filesize);" \ "cp.b $(loadaddr) 0x20000000 $(filesize)" +# endif # endif # ifdef CONFIG_NETCONSOLE # define NETCONSOLE_ENV \ -- cgit v1.3.1 From 49c2da53b7aa63f68118fa9ffa5c5e546440ebb2 Mon Sep 17 00:00:00 2001 From: Bob Liu Date: Tue, 27 Dec 2011 15:05:53 +0800 Subject: blackfin: bf60x: add hw watchdog support Signed-off-by: Bob Liu Signed-off-by: Sonic Zhang Signed-off-by: Sonic Zhang --- arch/blackfin/cpu/initcode.c | 13 +++++++++++++ arch/blackfin/cpu/start.S | 2 ++ include/configs/bf609-ezkit.h | 1 + 3 files changed, 16 insertions(+) (limited to 'include') diff --git a/arch/blackfin/cpu/initcode.c b/arch/blackfin/cpu/initcode.c index a717148651f..ce9a43598c7 100644 --- a/arch/blackfin/cpu/initcode.c +++ b/arch/blackfin/cpu/initcode.c @@ -461,8 +461,21 @@ program_early_devices(ADI_BOOT_DATA *bs, uint *sdivB, uint *divB, uint *vcoB) */ if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_BYPASS) { serial_putc('e'); +#ifdef __ADSPBF60x__ + bfin_write_SEC_GCTL(0x2); + SSYNC(); + bfin_write_SEC_FCTL(0xc1); + bfin_write_SEC_SCTL(2, bfin_read_SEC_SCTL(2) | 0x6); + + bfin_write_SEC_CCTL(0x2); + SSYNC(); + bfin_write_SEC_GCTL(0x1); + bfin_write_SEC_CCTL(0x1); +#endif bfin_write_WDOG_CNT(MSEC_TO_SCLK(CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE)); +#if CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART bfin_write_WDOG_CTL(0); +#endif serial_putc('f'); } #endif diff --git a/arch/blackfin/cpu/start.S b/arch/blackfin/cpu/start.S index 90b4d1ae942..7155fc858b7 100644 --- a/arch/blackfin/cpu/start.S +++ b/arch/blackfin/cpu/start.S @@ -65,6 +65,7 @@ ENTRY(_start) p5.h = HI(COREMMR_BASE); #ifdef CONFIG_HW_WATCHDOG +#ifndef __ADSPBF60x__ # ifndef CONFIG_HW_WATCHDOG_TIMEOUT_START # define CONFIG_HW_WATCHDOG_TIMEOUT_START 5000 # endif @@ -77,6 +78,7 @@ ENTRY(_start) [p4 + (WDOG_CNT - SYSMMR_BASE)] = r0; /* fire up the watchdog - R0.L above needs to be 0x0000 */ W[p4 + (WDOG_CTL - SYSMMR_BASE)] = r0; +#endif #endif /* Turn on the serial for debugging the init process */ diff --git a/include/configs/bf609-ezkit.h b/include/configs/bf609-ezkit.h index 6dffab86dc4..02149fa94df 100644 --- a/include/configs/bf609-ezkit.h +++ b/include/configs/bf609-ezkit.h @@ -63,6 +63,7 @@ #define CONFIG_SYS_MONITOR_LEN (768 * 1024) #define CONFIG_SYS_MALLOC_LEN (512 * 1024) +#define CONFIG_HW_WATCHDOG /* * Network Settings */ -- cgit v1.3.1 From e6d5241534486effa116bf685f7707041492ec7b Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Wed, 26 Dec 2012 09:53:33 +0000 Subject: fs: Move ls and read methods into ext4, fat It doesn't make a lot of sense to have these methods in fs.c. They are filesystem-specific, not generic code. Add each to the relevant filesystem and remove the associated #ifdefs in fs.c. Signed-off-by: Simon Glass Reviewed-by: Tom Rini --- fs/ext4/ext4fs.c | 37 +++++++++++++++++ fs/fat/fat.c | 17 ++++++++ fs/fs.c | 118 ++++--------------------------------------------------- include/ext4fs.h | 3 ++ include/fat.h | 2 + 5 files changed, 67 insertions(+), 110 deletions(-) (limited to 'include') diff --git a/fs/ext4/ext4fs.c b/fs/ext4/ext4fs.c index 7fdb4634c79..4dddde24764 100644 --- a/fs/ext4/ext4fs.c +++ b/fs/ext4/ext4fs.c @@ -191,3 +191,40 @@ int ext4fs_read(char *buf, unsigned len) return ext4fs_read_file(ext4fs_file, 0, len, buf); } + +int ext4fs_probe(block_dev_desc_t *fs_dev_desc, + disk_partition_t *fs_partition) +{ + ext4fs_set_blk_dev(fs_dev_desc, fs_partition); + + if (!ext4fs_mount(fs_partition->size)) { + ext4fs_close(); + return -1; + } + + return 0; +} + +int ext4_read_file(const char *filename, void *buf, int offset, int len) +{ + int file_len; + int len_read; + + if (offset != 0) { + printf("** Cannot support non-zero offset **\n"); + return -1; + } + + file_len = ext4fs_open(filename); + if (file_len < 0) { + printf("** File not found %s **\n", filename); + return -1; + } + + if (len == 0) + len = file_len; + + len_read = ext4fs_read(buf, len); + + return len_read; +} diff --git a/fs/fat/fat.c b/fs/fat/fat.c index 66d54738a02..b0fac5e1ed6 100644 --- a/fs/fat/fat.c +++ b/fs/fat/fat.c @@ -1260,3 +1260,20 @@ long file_fat_read(const char *filename, void *buffer, unsigned long maxsize) { return file_fat_read_at(filename, 0, buffer, maxsize); } + +int fat_read_file(const char *filename, void *buf, int offset, int len) +{ + int len_read; + + len_read = file_fat_read_at(filename, offset, buf, len); + if (len_read == -1) { + printf("** Unable to read file %s **\n", filename); + return -1; + } + + return len_read; +} + +void fat_close(void) +{ +} diff --git a/fs/fs.c b/fs/fs.c index 0cbec9958e7..95c882e2029 100644 --- a/fs/fs.c +++ b/fs/fs.c @@ -50,110 +50,6 @@ static inline void fs_close_unsupported(void) { } -#ifdef CONFIG_FS_FAT -static int fs_probe_fat(block_dev_desc_t *fs_dev_desc, - disk_partition_t *fs_partition) -{ - return fat_set_blk_dev(fs_dev_desc, fs_partition); -} - -static void fs_close_fat(void) -{ -} - -#define fs_ls_fat file_fat_ls - -static int fs_read_fat(const char *filename, void *buf, int offset, int len) -{ - int len_read; - - len_read = file_fat_read_at(filename, offset, buf, len); - if (len_read == -1) { - printf("** Unable to read file %s **\n", filename); - return -1; - } - - return len_read; -} -#else -static inline int fs_probe_fat(void) -{ - return -1; -} - -static inline void fs_close_fat(void) -{ -} - -#define fs_ls_fat fs_ls_unsupported -#define fs_read_fat fs_read_unsupported -#endif - -#ifdef CONFIG_FS_EXT4 -static int fs_probe_ext(block_dev_desc_t *fs_dev_desc, - disk_partition_t *fs_partition) -{ - ext4fs_set_blk_dev(fs_dev_desc, fs_partition); - - if (!ext4fs_mount(fs_partition->size)) { - ext4fs_close(); - return -1; - } - - return 0; -} - -static void fs_close_ext(void) -{ - ext4fs_close(); -} - -#define fs_ls_ext ext4fs_ls - -static int fs_read_ext(const char *filename, void *buf, int offset, int len) -{ - int file_len; - int len_read; - - if (offset != 0) { - printf("** Cannot support non-zero offset **\n"); - return -1; - } - - file_len = ext4fs_open(filename); - if (file_len < 0) { - printf("** File not found %s **\n", filename); - ext4fs_close(); - return -1; - } - - if (len == 0) - len = file_len; - - len_read = ext4fs_read(buf, len); - ext4fs_close(); - - if (len_read != len) { - printf("** Unable to read file %s **\n", filename); - return -1; - } - - return len_read; -} -#else -static inline int fs_probe_ext(void) -{ - return -1; -} - -static inline void fs_close_ext(void) -{ -} - -#define fs_ls_ext fs_ls_unsupported -#define fs_read_ext fs_read_unsupported -#endif - struct fstype_info { int fstype; int (*probe)(block_dev_desc_t *fs_dev_desc, @@ -167,19 +63,19 @@ static struct fstype_info fstypes[] = { #ifdef CONFIG_FS_FAT { .fstype = FS_TYPE_FAT, - .probe = fs_probe_fat, - .close = fs_close_fat, + .probe = fat_set_blk_dev, + .close = fat_close, .ls = file_fat_ls, - .read = fs_read_fat, + .read = fat_read_file, }, #endif #ifdef CONFIG_FS_EXT4 { .fstype = FS_TYPE_EXT, - .probe = fs_probe_ext, - .close = fs_close_ext, + .probe = ext4fs_probe, + .close = ext4fs_close, .ls = ext4fs_ls, - .read = fs_read_ext, + .read = ext4_read_file, }, #endif { @@ -248,6 +144,7 @@ static void fs_close(void) struct fstype_info *info = fs_get_info(fs_type); info->close(); + fs_type = FS_TYPE_ANY; } @@ -259,6 +156,7 @@ int fs_ls(const char *dirname) ret = info->ls(dirname); + fs_type = FS_TYPE_ANY; fs_close(); return ret; diff --git a/include/ext4fs.h b/include/ext4fs.h index 3b59d15aab4..025a2e89c23 100644 --- a/include/ext4fs.h +++ b/include/ext4fs.h @@ -138,4 +138,7 @@ void ext4fs_free_node(struct ext2fs_node *node, struct ext2fs_node *currroot); int ext4fs_devread(int sector, int byte_offset, int byte_len, char *buf); void ext4fs_set_blk_dev(block_dev_desc_t *rbdd, disk_partition_t *info); long int read_allocated_block(struct ext2_inode *inode, int fileblock); +int ext4fs_probe(block_dev_desc_t *fs_dev_desc, + disk_partition_t *fs_partition); +int ext4_read_file(const char *filename, void *buf, int offset, int len); #endif diff --git a/include/fat.h b/include/fat.h index b28c3fd6685..97013237486 100644 --- a/include/fat.h +++ b/include/fat.h @@ -213,4 +213,6 @@ int fat_set_blk_dev(block_dev_desc_t *rbdd, disk_partition_t *info); int fat_register_device(block_dev_desc_t *dev_desc, int part_no); int file_fat_write(const char *filename, void *buffer, unsigned long maxsize); +int fat_read_file(const char *filename, void *buf, int offset, int len); +void fat_close(void); #endif /* _FAT_H_ */ -- cgit v1.3.1 From 62584db191013f13133be0f6702d0c935a7c85a6 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Wed, 26 Dec 2012 09:53:34 +0000 Subject: sandbox: Add a way of obtaining directory listings This implementation uses opendir()/readdir() to access the directory information and then puts it in a linked list for the caller's use. Signed-off-by: Simon Glass Reviewed-by: Tom Rini --- arch/sandbox/cpu/os.c | 101 ++++++++++++++++++++++++++++++++++++++++++++++++++ include/os.h | 48 ++++++++++++++++++++++++ 2 files changed, 149 insertions(+) (limited to 'include') diff --git a/arch/sandbox/cpu/os.c b/arch/sandbox/cpu/os.c index 3e37c930b06..d07540776cc 100644 --- a/arch/sandbox/cpu/os.c +++ b/arch/sandbox/cpu/os.c @@ -19,10 +19,13 @@ * MA 02111-1307 USA */ +#include #include #include #include +#include #include +#include #include #include #include @@ -261,3 +264,101 @@ int os_parse_args(struct sandbox_state *state, int argc, char *argv[]) return 0; } + +void os_dirent_free(struct os_dirent_node *node) +{ + struct os_dirent_node *next; + + while (node) { + next = node->next; + free(node); + node = next; + } +} + +int os_dirent_ls(const char *dirname, struct os_dirent_node **headp) +{ + struct dirent entry, *result; + struct os_dirent_node *head, *node, *next; + struct stat buf; + DIR *dir; + int ret; + char *fname; + int len; + + *headp = NULL; + dir = opendir(dirname); + if (!dir) + return -1; + + /* Create a buffer for the maximum filename length */ + len = sizeof(entry.d_name) + strlen(dirname) + 2; + fname = malloc(len); + if (!fname) { + ret = -ENOMEM; + goto done; + } + + for (node = head = NULL;; node = next) { + ret = readdir_r(dir, &entry, &result); + if (ret || !result) + break; + next = malloc(sizeof(*node) + strlen(entry.d_name) + 1); + if (!next) { + os_dirent_free(head); + ret = -ENOMEM; + goto done; + } + strcpy(next->name, entry.d_name); + switch (entry.d_type) { + case DT_REG: + next->type = OS_FILET_REG; + break; + case DT_DIR: + next->type = OS_FILET_DIR; + break; + case DT_LNK: + next->type = OS_FILET_LNK; + break; + } + next->size = 0; + snprintf(fname, len, "%s/%s", dirname, next->name); + if (!stat(fname, &buf)) + next->size = buf.st_size; + if (node) + node->next = next; + if (!head) + head = node; + } + *headp = head; + +done: + closedir(dir); + return ret; +} + +const char *os_dirent_typename[OS_FILET_COUNT] = { + " ", + "SYM", + "DIR", + "???", +}; + +const char *os_dirent_get_typename(enum os_dirent_t type) +{ + if (type >= 0 && type < OS_FILET_COUNT) + return os_dirent_typename[type]; + + return os_dirent_typename[OS_FILET_UNKNOWN]; +} + +ssize_t os_get_filesize(const char *fname) +{ + struct stat buf; + int ret; + + ret = stat(fname, &buf); + if (ret) + return ret; + return buf.st_size; +} diff --git a/include/os.h b/include/os.h index c452d1b56ef..038aba9e4fe 100644 --- a/include/os.h +++ b/include/os.h @@ -146,4 +146,52 @@ u64 os_get_nsec(void); */ int os_parse_args(struct sandbox_state *state, int argc, char *argv[]); +/* + * Types of directory entry that we support. See also os_dirent_typename in + * the C file. + */ +enum os_dirent_t { + OS_FILET_REG, /* Regular file */ + OS_FILET_LNK, /* Symbolic link */ + OS_FILET_DIR, /* Directory */ + OS_FILET_UNKNOWN, /* Something else */ + + OS_FILET_COUNT, +}; + +/** A directory entry node, containing information about a single dirent */ +struct os_dirent_node { + struct os_dirent_node *next; /* Pointer to next node, or NULL */ + ulong size; /* Size of file in bytes */ + enum os_dirent_t type; /* Type of entry */ + char name[0]; /* Name of entry */ +}; + +/** + * Get a directionry listing + * + * This allocates and returns a linked list containing the directory listing. + * + * @param dirname Directory to examine + * @param headp Returns pointer to head of linked list, or NULL if none + * @return 0 if ok, -ve on error + */ +int os_dirent_ls(const char *dirname, struct os_dirent_node **headp); + +/** + * Get the name of a directory entry type + * + * @param type Type to cehck + * @return string containing the name of that type, or "???" if none/invalid + */ +const char *os_dirent_get_typename(enum os_dirent_t type); + +/** + * Get the size of a file + * + * @param fname Filename to check + * @return size of file, or -1 if an error ocurred + */ +ssize_t os_get_filesize(const char *fname); + #endif -- cgit v1.3.1 From 92ccc96bf3cd6c6a3a9a56e03d5ceb4874735d22 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Wed, 26 Dec 2012 09:53:35 +0000 Subject: sandbox: Add host filesystem This allows reading of files from the host filesystem in sandbox. Signed-off-by: Simon Glass Reviewed-by: Tom Rini --- Makefile | 1 + disk/part.c | 17 +++++++++++ fs/fs.c | 10 ++++++ fs/sandbox/Makefile | 47 ++++++++++++++++++++++++++++ fs/sandbox/sandboxfs.c | 83 ++++++++++++++++++++++++++++++++++++++++++++++++++ include/fs.h | 1 + include/sandboxfs.h | 30 ++++++++++++++++++ 7 files changed, 189 insertions(+) create mode 100644 fs/sandbox/Makefile create mode 100644 fs/sandbox/sandboxfs.c create mode 100644 include/sandboxfs.h (limited to 'include') diff --git a/Makefile b/Makefile index fc18dd4cc02..8f01ff4e0f1 100644 --- a/Makefile +++ b/Makefile @@ -264,6 +264,7 @@ LIBS-y += fs/libfs.o \ fs/fdos/libfdos.o \ fs/jffs2/libjffs2.o \ fs/reiserfs/libreiserfs.o \ + fs/sandbox/libsandboxfs.o \ fs/ubifs/libubifs.o \ fs/yaffs2/libyaffs2.o \ fs/zfs/libzfs.o diff --git a/disk/part.c b/disk/part.c index 7bdc90eff70..58a45637aab 100644 --- a/disk/part.c +++ b/disk/part.c @@ -472,6 +472,23 @@ int get_device_and_partition(const char *ifname, const char *dev_part_str, int part; disk_partition_t tmpinfo; + /* + * For now, we have a special case for sandbox, since there is no + * real block device support. + */ + if (0 == strcmp(ifname, "host")) { + *dev_desc = NULL; + info->start = info->size = info->blksz = 0; + info->bootable = 0; + strcpy((char *)info->type, BOOT_PART_TYPE); + strcpy((char *)info->name, "Sandbox host"); +#ifdef CONFIG_PARTITION_UUIDS + info->uuid[0] = 0; +#endif + + return 0; + } + /* If no dev_part_str, use bootdevice environment variable */ if (!dev_part_str || !strlen(dev_part_str) || !strcmp(dev_part_str, "-")) diff --git a/fs/fs.c b/fs/fs.c index 95c882e2029..6f5063c3aff 100644 --- a/fs/fs.c +++ b/fs/fs.c @@ -20,6 +20,7 @@ #include #include #include +#include #include DECLARE_GLOBAL_DATA_PTR; @@ -77,6 +78,15 @@ static struct fstype_info fstypes[] = { .ls = ext4fs_ls, .read = ext4_read_file, }, +#endif +#ifdef CONFIG_SANDBOX + { + .fstype = FS_TYPE_SANDBOX, + .probe = sandbox_fs_set_blk_dev, + .close = sandbox_fs_close, + .ls = sandbox_fs_ls, + .read = fs_read_sandbox, + }, #endif { .fstype = FS_TYPE_ANY, diff --git a/fs/sandbox/Makefile b/fs/sandbox/Makefile new file mode 100644 index 00000000000..b3155b004c4 --- /dev/null +++ b/fs/sandbox/Makefile @@ -0,0 +1,47 @@ +# +# Copyright (c) 2012, Google Inc. +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2003 +# Pavel Bartusek, Sysgo Real-Time Solutions AG, pba@sysgo.de +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)libsandboxfs.o + +COBJS-$(CONFIG_SANDBOX) := sandboxfs.o + +SRCS := $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS-y)) + +all: $(LIB) $(AOBJS) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/fs/sandbox/sandboxfs.c b/fs/sandbox/sandboxfs.c new file mode 100644 index 00000000000..02d26ff851e --- /dev/null +++ b/fs/sandbox/sandboxfs.c @@ -0,0 +1,83 @@ +/* + * Copyright (c) 2012, Google Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +int sandbox_fs_set_blk_dev(block_dev_desc_t *rbdd, disk_partition_t *info) +{ + return 0; +} + +long sandbox_fs_read_at(const char *filename, unsigned long pos, + void *buffer, unsigned long maxsize) +{ + ssize_t size; + int fd, ret; + + fd = os_open(filename, OS_O_RDONLY); + if (fd < 0) + return fd; + ret = os_lseek(fd, pos, OS_SEEK_SET); + if (ret == -1) { + os_close(fd); + return ret; + } + if (!maxsize) + maxsize = os_get_filesize(filename); + size = os_read(fd, buffer, maxsize); + os_close(fd); + + return size; +} + +int sandbox_fs_ls(const char *dirname) +{ + struct os_dirent_node *head, *node; + int ret; + + ret = os_dirent_ls(dirname, &head); + if (ret) + return ret; + + for (node = head; node; node = node->next) { + printf("%s %10lu %s\n", os_dirent_get_typename(node->type), + node->size, node->name); + } + + return 0; +} + +void sandbox_fs_close(void) +{ +} + +int fs_read_sandbox(const char *filename, void *buf, int offset, int len) +{ + int len_read; + + len_read = sandbox_fs_read_at(filename, offset, buf, len); + if (len_read == -1) { + printf("** Unable to read file %s **\n", filename); + return -1; + } + + return len_read; +} diff --git a/include/fs.h b/include/fs.h index 4f30a385a03..b6d69e5ced1 100644 --- a/include/fs.h +++ b/include/fs.h @@ -21,6 +21,7 @@ #define FS_TYPE_ANY 0 #define FS_TYPE_FAT 1 #define FS_TYPE_EXT 2 +#define FS_TYPE_SANDBOX 3 /* * Tell the fs layer which block device an partition to use for future diff --git a/include/sandboxfs.h b/include/sandboxfs.h new file mode 100644 index 00000000000..f5213ac1075 --- /dev/null +++ b/include/sandboxfs.h @@ -0,0 +1,30 @@ +/* + * Copyright (c) 2012, Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __SANDBOX_FS__ +#define __SANDBOX_FS__ + +int sandbox_fs_set_blk_dev(block_dev_desc_t *rbdd, disk_partition_t *info); + +long sandbox_fs_read_at(const char *filename, unsigned long pos, + void *buffer, unsigned long maxsize); + +void sandbox_fs_close(void); +int sandbox_fs_ls(const char *dirname); +int fs_read_sandbox(const char *filename, void *buf, int offset, int len); + +#endif -- cgit v1.3.1 From d304931f236db3af4f6a6f522b140f26e63e3a18 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Wed, 26 Dec 2012 09:53:36 +0000 Subject: sandbox: Add 'sb' command to access filesystem features The new 'sb' command is intended to deal with sandbox-specific features that have no parallel in other archs. This commit adds two sub-commands to list a directory and read a file from the host filesystem. Signed-off-by: Simon Glass Reviewed-by: Tom Rini --- README | 1 + common/Makefile | 1 + common/cmd_sandbox.c | 63 ++++++++++++++++++++++++++++++++++++++++++++++++ include/config_cmd_all.h | 1 + 4 files changed, 66 insertions(+) create mode 100644 common/cmd_sandbox.c (limited to 'include') diff --git a/README b/README index 51eb71b27c5..42544cead64 100644 --- a/README +++ b/README @@ -877,6 +877,7 @@ The following options need to be configured: CONFIG_CMD_READ * Read raw data from partition CONFIG_CMD_REGINFO * Register dump CONFIG_CMD_RUN run command in env variable + CONFIG_CMD_SANDBOX * sb command to access sandbox features CONFIG_CMD_SAVES * save S record dump CONFIG_CMD_SCSI * SCSI Support CONFIG_CMD_SDRAM * print SDRAM configuration information diff --git a/common/Makefile b/common/Makefile index 54fcc815889..719fc231b88 100644 --- a/common/Makefile +++ b/common/Makefile @@ -152,6 +152,7 @@ COBJS-$(CONFIG_CMD_PXE) += cmd_pxe.o COBJS-$(CONFIG_CMD_READ) += cmd_read.o COBJS-$(CONFIG_CMD_REGINFO) += cmd_reginfo.o COBJS-$(CONFIG_CMD_REISER) += cmd_reiser.o +COBJS-$(CONFIG_SANDBOX) += cmd_sandbox.o COBJS-$(CONFIG_CMD_SATA) += cmd_sata.o COBJS-$(CONFIG_CMD_SF) += cmd_sf.o COBJS-$(CONFIG_CMD_SCSI) += cmd_scsi.o diff --git a/common/cmd_sandbox.c b/common/cmd_sandbox.c new file mode 100644 index 00000000000..206a48614da --- /dev/null +++ b/common/cmd_sandbox.c @@ -0,0 +1,63 @@ +/* + * Copyright (c) 2012, Google Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +static int do_sandbox_load(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + return do_load(cmdtp, flag, argc, argv, FS_TYPE_SANDBOX, 16); +} + +static int do_sandbox_ls(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + return do_ls(cmdtp, flag, argc, argv, FS_TYPE_SANDBOX); +} + +static cmd_tbl_t cmd_sandbox_sub[] = { + U_BOOT_CMD_MKENT(load, 3, 0, do_sandbox_load, "", ""), + U_BOOT_CMD_MKENT(ls, 3, 0, do_sandbox_ls, "", ""), +}; + +static int do_sandbox(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + cmd_tbl_t *c; + + /* Skip past 'sandbox' */ + argc--; + argv++; + + c = find_cmd_tbl(argv[0], cmd_sandbox_sub, + ARRAY_SIZE(cmd_sandbox_sub)); + + if (c) + return c->cmd(cmdtp, flag, argc, argv); + else + return CMD_RET_USAGE; +} + +U_BOOT_CMD( + sb, 6, 1, do_sandbox, + "Miscellaneous sandbox commands", + "load host [ ] - load a file from host\n" + "sb ls host - save a file to host" +); diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h index 2a82e19c78c..0930781d83c 100644 --- a/include/config_cmd_all.h +++ b/include/config_cmd_all.h @@ -76,6 +76,7 @@ #define CONFIG_CMD_RARP /* rarpboot support */ #define CONFIG_CMD_READ /* Read data from partition */ #define CONFIG_CMD_RUN /* run command in env variable */ +#define CONFIG_CMD_SANDBOX /* sb command to access sandbox features */ #define CONFIG_CMD_SAVEENV /* saveenv */ #define CONFIG_CMD_SAVES /* save S record dump */ #define CONFIG_CMD_SCSI /* SCSI Support */ -- cgit v1.3.1 From 10fc12184fe844761380c1a7ce4fd68c9f5b0ba6 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Wed, 26 Dec 2012 09:53:37 +0000 Subject: sandbox: Enable ext4 and fat filesystems These are useful for build-testing code, at least. Signed-off-by: Simon Glass Reviewed-by: Tom Rini --- include/configs/sandbox.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include') diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index 9f51a0b813e..2a45c7bf202 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -32,6 +32,13 @@ #define CONFIG_OF_LIBFDT #define CONFIG_LMB +#define CONFIG_FS_FAT +#define CONFIG_FS_EXT4 +#define CONFIG_EXT4_WRITE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_EXT4_WRITE + #define CONFIG_SYS_VSNPRINTF #define CONFIG_CMD_GPIO -- cgit v1.3.1 From e40753b207029dfc9e0a9e2ec4545fbd32e0a8cc Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Wed, 26 Dec 2012 09:53:38 +0000 Subject: sandbox: config: Enable sandbox command The 'sb' command allows loading files from the host, and listing directories. Signed-off-by: Simon Glass Reviewed-by: Tom Rini --- include/configs/sandbox.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index 2a45c7bf202..406da43aa1b 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -97,6 +97,8 @@ #define CONFIG_SHA1 #define CONFIG_SHA256 +#define CONFIG_CMD_SANDBOX + #define CONFIG_BOOTARGS "" #define CONFIG_EXTRA_ENV_SETTINGS "stdin=serial\0" \ -- cgit v1.3.1 From 949a77109747d5db7d559359d3ec24bade653be8 Mon Sep 17 00:00:00 2001 From: Joe Hershberger Date: Thu, 1 Nov 2012 16:54:18 +0000 Subject: ubifs: Allow ubifsmount volume reference by number UBI can mount volumes by name or number The current code forces you to name the volume by prepending every name with "ubi:". >From fs/ubifs/super.c * There are several ways to specify UBI volumes when mounting UBIFS: * o ubiX_Y - UBI device number X, volume Y; * o ubiY - UBI device number 0, volume Y; * o ubiX:NAME - mount UBI device X, volume with name NAME; * o ubi:NAME - mount UBI device 0, volume with name NAME. Now any name passed in any of the above forms are allowed. Also update the configs that referenced ubifsmount. Signed-off-by: Joe Hershberger --- fs/ubifs/super.c | 4 +--- include/configs/apx4devkit.h | 2 +- include/configs/cam_enc_4xx.h | 2 +- include/configs/dockstar.h | 2 +- include/configs/ea20.h | 6 +++--- include/configs/ib62x0.h | 2 +- include/configs/iconnect.h | 2 +- include/configs/omap3_pandora.h | 3 ++- include/configs/tricorder.h | 2 +- include/configs/x600.h | 2 +- 10 files changed, 13 insertions(+), 14 deletions(-) (limited to 'include') diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c index 30ccd98c22b..9acf243eeff 100644 --- a/fs/ubifs/super.c +++ b/fs/ubifs/super.c @@ -1164,10 +1164,9 @@ static struct file_system_type ubifs_fs_type = { .get_sb = ubifs_get_sb, }; -int ubifs_mount(char *vol_name) +int ubifs_mount(char *name) { int flags; - char name[80] = "ubi:"; void *data; struct vfsmount *mnt; int ret; @@ -1186,7 +1185,6 @@ int ubifs_mount(char *vol_name) * Mount in read-only mode */ flags = MS_RDONLY; - strcat(name, vol_name); data = NULL; mnt = NULL; ret = ubifs_get_sb(&ubifs_fs_type, flags, name, data, mnt); diff --git a/include/configs/apx4devkit.h b/include/configs/apx4devkit.h index 73c66af06d5..ab4efa4b03c 100644 --- a/include/configs/apx4devkit.h +++ b/include/configs/apx4devkit.h @@ -222,7 +222,7 @@ "root=ubi0:rootfs rootfstype=ubifs ${mtdparts} rw\0" \ "bootcmd_nand=" \ "run bootargs_nand && ubi part root 2048 && " \ - "ubifsmount rootfs && ubifsload 41000000 boot/uImage && " \ + "ubifsmount ubi:rootfs && ubifsload 41000000 boot/uImage && " \ "bootm 41000000\0" \ "bootargs_mmc=" \ "setenv bootargs ${kernelargs} " \ diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h index a7a698c0caa..56528ddaafb 100644 --- a/include/configs/cam_enc_4xx.h +++ b/include/configs/cam_enc_4xx.h @@ -451,7 +451,7 @@ "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage \0" \ "kernel_addr_r=80600000\0" \ "load_kernel=tftp ${kernel_addr_r} ${bootfile}\0" \ - "ubi_load_kernel=ubi part ubi 2048;ubifsmount ${img_volume};" \ + "ubi_load_kernel=ubi part ubi 2048;ubifsmount ubi:${img_volume};" \ "ubifsload ${kernel_addr_r} boot/uImage\0" \ "fit_addr_r=" __stringify(CONFIG_BOARD_IMG_ADDR_R) "\0" \ "img_addr_r=" __stringify(CONFIG_BOARD_IMG_ADDR_R) "\0" \ diff --git a/include/configs/dockstar.h b/include/configs/dockstar.h index 249f93bf130..63d5e35e929 100644 --- a/include/configs/dockstar.h +++ b/include/configs/dockstar.h @@ -85,7 +85,7 @@ #define CONFIG_BOOTCOMMAND \ "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ "ubi part root; " \ - "ubifsmount root; " \ + "ubifsmount ubi:root; " \ "ubifsload 0x800000 ${kernel}; " \ "ubifsload 0x1100000 ${initrd}; " \ "bootm 0x800000 0x1100000" diff --git a/include/configs/ea20.h b/include/configs/ea20.h index d3eb5969dc9..a8c08e8d95d 100644 --- a/include/configs/ea20.h +++ b/include/configs/ea20.h @@ -293,12 +293,12 @@ "bootm ${kernel_addr_r}\0" \ "net_self_load=tftp ${kernel_addr_r} ${bootfile};" \ "tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \ - "nand_nand=ubi part nand0,${as};ubifsmount rootfs;" \ + "nand_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;" \ "ubifsload ${kernel_addr_r} /boot/uImage;" \ "ubifsumount; run nandargs addip addtty " \ "addmtd addmisc addmem;clrlogo;" \ "bootm ${kernel_addr_r}\0" \ - "nand_nandrw=ubi part nand0,${as};ubifsmount rootfs;" \ + "nand_nandrw=ubi part nand0,${as};ubifsmount ubi:rootfs;" \ "ubifsload ${kernel_addr_r} /boot/uImage;" \ "ubifsumount; run nandrwargs addip addtty " \ "addmtd addmisc addmem;clrlogo;" \ @@ -309,7 +309,7 @@ "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \ "load_magic=if sf probe 0;then sf " \ "read c0000000 0x10000 0x60000;fi\0" \ - "load_nand=ubi part nand0,${as};ubifsmount rootfs;" \ + "load_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;" \ "if ubifsload c0000014 /boot/u-boot.bin;" \ "then mw c0000008 ${filesize};else echo Error reading" \ " u-boot from nand!;fi\0" \ diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h index f646ae57764..d3c664cd188 100644 --- a/include/configs/ib62x0.h +++ b/include/configs/ib62x0.h @@ -88,7 +88,7 @@ #define CONFIG_BOOTCOMMAND \ "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ "ubi part root; " \ - "ubifsmount root; " \ + "ubifsmount ubi:root; " \ "ubifsload 0x800000 ${kernel}; " \ "ubifsload 0x1100000 ${initrd}; " \ "bootm 0x800000 0x1100000" diff --git a/include/configs/iconnect.h b/include/configs/iconnect.h index ba57849a602..c882bfa6066 100644 --- a/include/configs/iconnect.h +++ b/include/configs/iconnect.h @@ -87,7 +87,7 @@ #define CONFIG_BOOTCOMMAND \ "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ "ubi part rootfs; " \ - "ubifsmount rootfs; " \ + "ubifsmount ubi:rootfs; " \ "ubifsload 0x800000 ${kernel}; " \ "bootm 0x800000" diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index ee888418c59..b77ce25880d 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -180,7 +180,8 @@ "ext2load mmc1 0 ${loadaddr} autoboot.scr; then " \ "source ${loadaddr}; " \ "fi; " \ - "ubi part boot && ubifsmount boot && ubifsload ${loadaddr} uImage && bootm ${loadaddr}" + "ubi part boot && ubifsmount ubi:boot && " \ + "ubifsload ${loadaddr} uImage && bootm ${loadaddr}" #define CONFIG_AUTO_COMPLETE 1 /* diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index 1a665ac3ac0..ebd7a257f36 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -193,7 +193,7 @@ "bootm ${loadaddr}\0" \ "loaduimage_ubi=mtd default; " \ "ubi part fs; " \ - "ubifsmount root; " \ + "ubifsmount ubi:root; " \ "ubifsload ${loadaddr} /boot/uImage\0" \ "nandboot=echo Booting from nand ...; " \ "run nandargs; " \ diff --git a/include/configs/x600.h b/include/configs/x600.h index 3082aaa1e63..bb495a1c909 100644 --- a/include/configs/x600.h +++ b/include/configs/x600.h @@ -262,7 +262,7 @@ "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip" \ " addcon addmisc addmtd;" \ "bootm ${kernel_addr} - ${dtb_addr}\0" \ - "ubifs_mount=ubi part ubi${boot_part};ubifsmount rootfs\0" \ + "ubifs_mount=ubi part ubi${boot_part};ubifsmount ubi:rootfs\0" \ "ubifs_load=ubifsload ${kernel_addr} ${kernel_fs};" \ "ubifsload ${dtb_addr} ${dtb_fs};\0" \ "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip addcon " \ -- cgit v1.3.1 From fc959081d41aab2d6f4614c5fb3dd1b77ffcdcf4 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Thu, 28 Feb 2013 19:26:18 +0000 Subject: x86: Enable CONFIG_OF_CONTROL on coreboot Make use of a device tree on coreboot boards, and set the default to link. Signed-off-by: Simon Glass --- include/configs/coreboot.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include') diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h index c7f36ff148f..49f05decc03 100644 --- a/include/configs/coreboot.h +++ b/include/configs/coreboot.h @@ -42,6 +42,12 @@ #define CONFIG_ZBOOT_32 #define CONFIG_PHYSMEM +#define CONFIG_LMB +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_CONTROL +#define CONFIG_OF_SEPARATE +#define CONFIG_DEFAULT_DEVICE_TREE link + /*----------------------------------------------------------------------- * Watchdog Configuration */ -- cgit v1.3.1