From 7a49a16ec54e03ea6a383c1b97a78acc059c2df8 Mon Sep 17 00:00:00 2001 From: Ashok Reddy Soma Date: Fri, 23 Oct 2020 04:58:57 -0600 Subject: Revert "mmc: zynq: parse dt when probing" This reverts commit 942b5fc03218d1c94468fc658e7dec65dabcc830. This is partial revert of the above commit. mmc_of_parse() is reading no-1-8-v from device tree and if set, it is clearing the UHS speed capabilities of cfg->host_caps. cfg->host_caps &= ~(UHS_CAPS | MMC_MODE_HS200 | MMC_MODE_HS400 | MMC_MODE_HS400_ES); This is still missing to clear UHS speeds like SDHCI_SUPPORT_SDR104, SDHCI_SUPPORT_SDR50 and SDHCI_SUPPORT_DDR50. Even if we clear the flags SDHCI_SUPPORT_XXX in mmc_of_parse(), these speed flags are getting set again in cfg->host_caps in sdhci_setup_cfg(). The reason for this is, SDHCI_SUPPORT_XXX flags are cleared only if controller is not capable of supporting MMC_VDD_165_195 volts. if (caps & SDHCI_CAN_VDD_180) cfg->voltages |= MMC_VDD_165_195; if (!(cfg->voltages & MMC_VDD_165_195)) caps_1 &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_DDR50); It means "no-1-8-v", which is read from DT is not coming in to effect. So it is better we keep the host quirks(SDHCI_QUIRK_NO_1_8_V) to clear UHS speeds based on no-1-8-v from device tree. Hence revert the functionality related to no-1-8-v only, rest is fine in the patch. Signed-off-by: Ashok Reddy Soma Signed-off-by: Michal Simek Reviewed-by: Jaehoon Chung Reviewed-by: Peng Fan --- include/sdhci.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/sdhci.h b/include/sdhci.h index f69d5f81fb1..1fd20ec0860 100644 --- a/include/sdhci.h +++ b/include/sdhci.h @@ -244,6 +244,7 @@ #define SDHCI_QUIRK_BROKEN_HISPD_MODE BIT(5) #define SDHCI_QUIRK_WAIT_SEND_CMD (1 << 6) #define SDHCI_QUIRK_USE_WIDE8 (1 << 8) +#define SDHCI_QUIRK_NO_1_8_V (1 << 9) /* to make gcc happy */ struct sdhci_host; -- cgit v1.3.1