From 353f36d96e49f3ad34ffc4a16dea7398c6f90f65 Mon Sep 17 00:00:00 2001 From: Yuantian Tang Date: Wed, 10 Apr 2019 16:43:34 +0800 Subject: armv8: ls1028ardb: Add support for LS1028ARDB LS1028A is an ARMv8 implementation. LS1028ARDB is an evaluation platform that supports the LS1028A family SoCs. This patch add basic support of the platform. Signed-off-by: Sudhanshu Gupta Signed-off-by: Rai Harninder Signed-off-by: Rajesh Bhagat Signed-off-by: Bhaskar Upadhaya Signed-off-by: Tang Yuantian Signed-off-by: Prabhakar Kushwaha --- include/configs/ls1028a_common.h | 200 +++++++++++++++++++++++++++++++++++++++ include/configs/ls1028ardb.h | 77 +++++++++++++++ 2 files changed, 277 insertions(+) create mode 100644 include/configs/ls1028a_common.h create mode 100644 include/configs/ls1028ardb.h (limited to 'include') diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h new file mode 100644 index 00000000000..0db86396e92 --- /dev/null +++ b/include/configs/ls1028a_common.h @@ -0,0 +1,200 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2019 NXP + */ + +#ifndef __L1028A_COMMON_H +#define __L1028A_COMMON_H + +#define CONFIG_REMAKE_ELF +#define CONFIG_FSL_LAYERSCAPE +#define CONFIG_MP + +#include +#include +#include + +/* Link Definitions */ +#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE + +#define CONFIG_SKIP_LOWLEVEL_INIT + +#define CONFIG_VERY_BIG_RAM +#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL +#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CONFIG_SYS_DDR_BLOCK2_BASE 0x2080000000ULL +#define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS 1 + +#define CONFIG_CMD_MEMTEST +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END 0x9fffffff + +/* + * SMP Definitinos + */ +#define CPU_RELEASE_ADDR secondary_boot_func + +/* Generic Timer Definitions */ +#define COUNTER_FREQUENCY 25000000 /* 25MHz */ + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2048 * 1024) + +/* I2C */ +#define CONFIG_SYS_I2C + +/* Serial Port */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2) + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) + +/* Physical Memory Map */ +#define CONFIG_CHIP_SELECTS_PER_CTRL 4 + +#define CONFIG_HWCONFIG +#define HWCONFIG_BUFFER_SIZE 128 + +/* Allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ + func(USB, usb, 0) +#include + +/* Initial environment variables */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "board=ls1028ardb\0" \ + "hwconfig=fsl_ddr:bank_intlv=auto\0" \ + "ramdisk_addr=0x800000\0" \ + "ramdisk_size=0x2000000\0" \ + "fdt_high=0xffffffffffffffff\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "fdt_addr=0x00f00000\0" \ + "kernel_addr=0x01000000\0" \ + "scriptaddr=0x80000000\0" \ + "scripthdraddr=0x80080000\0" \ + "fdtheader_addr_r=0x80100000\0" \ + "kernelheader_addr_r=0x80200000\0" \ + "load_addr=0xa0000000\0" \ + "kernel_addr_r=0x81000000\0" \ + "fdt_addr_r=0x90000000\0" \ + "ramdisk_addr_r=0xa0000000\0" \ + "kernel_start=0x1000000\0" \ + "kernelheader_start=0x800000\0" \ + "kernel_load=0xa0000000\0" \ + "kernel_size=0x2800000\0" \ + "kernelheader_size=0x40000\0" \ + "kernel_addr_sd=0x8000\0" \ + "kernel_size_sd=0x14000\0" \ + "kernelhdr_addr_sd=0x4000\0" \ + "kernelhdr_size_sd=0x10\0" \ + "console=ttyS0,115200\0" \ + "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ + BOOTENV \ + "boot_scripts=ls1028ardb_boot.scr\0" \ + "boot_script_hdr=hdr_ls1028ardb_bs.out\0" \ + "scan_dev_for_boot_part=" \ + "part list ${devtype} ${devnum} devplist; " \ + "env exists devplist || setenv devplist 1; " \ + "for distro_bootpart in ${devplist}; do " \ + "if fstype ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "bootfstype; then " \ + "run scan_dev_for_boot; " \ + "fi; " \ + "done\0" \ + "scan_dev_for_boot=" \ + "echo Scanning ${devtype} " \ + "${devnum}:${distro_bootpart}...; " \ + "for prefix in ${boot_prefixes}; do " \ + "run scan_dev_for_scripts; " \ + "done;" \ + "\0" \ + "boot_a_script=" \ + "load ${devtype} ${devnum}:${distro_bootpart} " \ + "${scriptaddr} ${prefix}${script}; " \ + "env exists secureboot && load ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "${scripthdraddr} ${prefix}${boot_script_hdr} " \ + "&& esbc_validate ${scripthdraddr};" \ + "source ${scriptaddr}\0" \ + "sd_bootcmd=echo Trying load from SD ..;" \ + "mmcinfo; mmc read $load_addr " \ + "$kernel_addr_sd $kernel_size_sd && " \ + "env exists secureboot && mmc read $kernelheader_addr_r " \ + "$kernelhdr_addr_sd $kernelhdr_size_sd " \ + " && esbc_validate ${kernelheader_addr_r};" \ + "bootm $load_addr#$board\0" \ + "emmc_bootcmd=echo Trying load from EMMC ..;" \ + "mmcinfo; mmc dev 1; mmc read $load_addr " \ + "$kernel_addr_sd $kernel_size_sd && " \ + "env exists secureboot && mmc read $kernelheader_addr_r " \ + "$kernelhdr_addr_sd $kernelhdr_size_sd " \ + " && esbc_validate ${kernelheader_addr_r};" \ + "bootm $load_addr#$board\0" + +#undef CONFIG_BOOTCOMMAND + +#define SD_BOOTCOMMAND \ + "run distro_bootcmd;run sd_bootcmd; " \ + "env exists secureboot && esbc_halt;" + +/* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */ + +#ifndef CONFIG_CMDLINE_EDITING +#define CONFIG_CMDLINE_EDITING 1 +#endif + +#define CONFIG_SYS_MAXARGS 64 /* max command args */ + +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ + +/* MMC */ +#ifdef CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 +#endif + +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define OCRAM_NONSECURE_SIZE 0x00010000 +#define CONFIG_ENV_OFFSET 0x500000 /* 5MB */ +#define CONFIG_SYS_FSL_QSPI_BASE 0x20000000 +#define CONFIG_ENV_ADDR CONFIG_SYS_FSL_QSPI_BASE + CONFIG_ENV_OFFSET +#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ +#define CONFIG_ENV_SECT_SIZE 0x40000 + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE + +/* MMC */ +#ifdef CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 +#endif + +/* I2C bus multiplexer */ +#define I2C_MUX_PCA_ADDR_PRI 0x77 /* Primary Mux*/ +#define I2C_MUX_CH_DEFAULT 0x8 + +/* EEPROM */ +#define CONFIG_ID_EEPROM +#define CONFIG_SYS_I2C_EEPROM_NXID +#define CONFIG_SYS_EEPROM_BUS_NUM 0 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 + +#endif /* __L1028A_COMMON_H */ diff --git a/include/configs/ls1028ardb.h b/include/configs/ls1028ardb.h new file mode 100644 index 00000000000..10791be8247 --- /dev/null +++ b/include/configs/ls1028ardb.h @@ -0,0 +1,77 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2019 NXP + */ + +#ifndef __LS1028A_RDB_H +#define __LS1028A_RDB_H + +#include "ls1028a_common.h" + +#define CONFIG_SYS_CLK_FREQ 100000000 +#define CONFIG_DDR_CLK_FREQ 100000000 +#define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ / 4) + +#define CONFIG_SYS_RTC_BUS_NUM 0 + +/* Store environment at top of flash */ +#define CONFIG_ENV_SIZE 0x2000 + +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE + +#define CONFIG_QIXIS_I2C_ACCESS +#define CONFIG_SYS_I2C_EARLY_INIT + +/* + * QIXIS Definitions + */ +#define CONFIG_FSL_QIXIS + +#ifdef CONFIG_FSL_QIXIS +#define QIXIS_BASE 0x7fb00000 +#define QIXIS_BASE_PHYS QIXIS_BASE +#define CONFIG_SYS_I2C_FPGA_ADDR 0x66 +#define QIXIS_LBMAP_SWITCH 2 +#define QIXIS_LBMAP_MASK 0xe0 +#define QIXIS_LBMAP_SHIFT 0x5 +#define QIXIS_LBMAP_DFLTBANK 0x00 +#define QIXIS_LBMAP_ALTBANK 0x00 +#define QIXIS_LBMAP_SD 0x00 +#define QIXIS_LBMAP_EMMC 0x00 +#define QIXIS_LBMAP_QSPI 0x00 +#define QIXIS_RCW_SRC_SD 0xf8 +#define QIXIS_RCW_SRC_EMMC 0xf9 +#define QIXIS_RCW_SRC_QSPI 0xff +#define QIXIS_RST_CTL_RESET 0x31 +#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x10 +#define QIXIS_RCFG_CTL_RECONFIG_START 0x11 +#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 +#define QIXIS_RST_FORCE_MEM 0x01 + +#define CONFIG_SYS_FPGA_CSPR_EXT (0x0) +#define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \ + CSPR_PORT_SIZE_8 | \ + CSPR_MSEL_GPCM | \ + CSPR_V) +#define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ + CSOR_NOR_NOR_MODE_AVD_NOR | \ + CSOR_NOR_TRHZ_80) +#endif + +/* SATA */ +#ifndef CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT2 +#endif +#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 +#define CONFIG_SYS_SCSI_MAX_LUN 1 +#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ + CONFIG_SYS_SCSI_MAX_LUN) +#define SCSI_VEND_ID 0x1b4b +#define SCSI_DEV_ID 0x9170 +#define CONFIG_SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID} +#define CONFIG_SCSI_AHCI_PLAT +#define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1 + +#endif /* __LS1028A_RDB_H */ -- cgit v1.3.1 From f278a217491a0072629480010868eb1ffda407a6 Mon Sep 17 00:00:00 2001 From: Yuantian Tang Date: Wed, 10 Apr 2019 16:43:35 +0800 Subject: armv8: ls1028aqds: Add support of LS1028AQDS LS1028AQDS Development System is a high-performance computing, evaluation, and development platform that supports LS1028A QorIQ Architecture processor. Signed-off-by: Sudhanshu Gupta Signed-off-by: Rai Harninder Signed-off-by: Rajesh Bhagat Signed-off-by: Bhaskar Upadhaya Signed-off-by: Tang yuantian Signed-off-by: Prabhakar Kushwaha --- arch/arm/Kconfig | 11 +++ arch/arm/cpu/armv8/Kconfig | 2 +- arch/arm/dts/Makefile | 1 + arch/arm/dts/fsl-ls1028a-qds.dts | 88 ++++++++++++++++++++ board/freescale/ls1028a/Kconfig | 39 +++++++++ board/freescale/ls1028a/MAINTAINERS | 11 +++ board/freescale/ls1028a/README | 85 +++++++++++++++++++ board/freescale/ls1028a/ls1028a.c | 38 +++++++++ configs/ls1028aqds_tfa_defconfig | 61 ++++++++++++++ include/configs/ls1028aqds.h | 161 ++++++++++++++++++++++++++++++++++++ 10 files changed, 496 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/fsl-ls1028a-qds.dts create mode 100644 configs/ls1028aqds_tfa_defconfig create mode 100644 include/configs/ls1028aqds.h (limited to 'include') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 0c9b0353528..efb9aab3906 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1262,6 +1262,17 @@ config TARGET_LS1012AFRDM development platform that supports the QorIQ LS1012A Layerscape Architecture processor. +config TARGET_LS1028AQDS + bool "Support ls1028aqds" + select ARCH_LS1028A + select ARM64 + select ARMV8_MULTIENTRY + help + Support for Freescale LS1028AQDS platform + The LS1028A Development System (QDS) is a high-performance + development platform that supports the QorIQ LS1028A + Layerscape Architecture processor. + config TARGET_LS1028ARDB bool "Support ls1028ardb" select ARCH_LS1028A diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig index 54831f79051..8a97d5b3fb1 100644 --- a/arch/arm/cpu/armv8/Kconfig +++ b/arch/arm/cpu/armv8/Kconfig @@ -104,7 +104,7 @@ config PSCI_RESET !TARGET_LS1012ARDB && !TARGET_LS1012AFRDM && \ !TARGET_LS1012A2G5RDB && !TARGET_LS1012AQDS && \ !TARGET_LS1012AFRWY && \ - !TARGET_LS1028ARDB && \ + !TARGET_LS1028ARDB && !TARGET_LS1028AQDS && \ !TARGET_LS1043ARDB && !TARGET_LS1043AQDS && \ !TARGET_LS1046ARDB && !TARGET_LS1046AQDS && \ !TARGET_LS2081ARDB && !TARGET_LX2160ARDB && \ diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 8855a014385..31ef2b66a33 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -330,6 +330,7 @@ dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \ fsl-ls1088a-rdb.dtb \ fsl-ls1088a-qds.dtb \ fsl-ls1028a-rdb.dtb \ + fsl-ls1028a-qds.dtb \ fsl-lx2160a-rdb.dtb \ fsl-lx2160a-qds.dtb dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \ diff --git a/arch/arm/dts/fsl-ls1028a-qds.dts b/arch/arm/dts/fsl-ls1028a-qds.dts new file mode 100644 index 00000000000..46a0419d770 --- /dev/null +++ b/arch/arm/dts/fsl-ls1028a-qds.dts @@ -0,0 +1,88 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP ls1028AQDS device tree source + * + * Copyright 2019 NXP + * + */ + +/dts-v1/; + +#include "fsl-ls1028a.dtsi" + +/ { + model = "NXP Layerscape 1028a QDS Board"; + compatible = "fsl,ls1028a-qds", "fsl,ls1028a"; +}; + +&dspi0 { + status = "okay"; +}; + +&dspi1 { + status = "okay"; +}; + +&dspi2 { + status = "okay"; +}; + +&esdhc0 { + status = "okay"; +}; + +&esdhc1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&serial0 { + status = "okay"; +}; + +&serial1 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; diff --git a/board/freescale/ls1028a/Kconfig b/board/freescale/ls1028a/Kconfig index bbfd4dd07d0..ca22c922035 100644 --- a/board/freescale/ls1028a/Kconfig +++ b/board/freescale/ls1028a/Kconfig @@ -1,3 +1,42 @@ +if TARGET_LS1028AQDS + +config SYS_BOARD + default "ls1028a" + +config SYS_VENDOR + default "freescale" + +config SYS_SOC + default "fsl-layerscape" + +config SYS_CONFIG_NAME + default "ls1028aqds" + +config EMMC_BOOT + bool "Support for booting from EMMC" + default n + +config SYS_TEXT_BASE + default 0x96000000 if SD_BOOT || EMMC_BOOT + default 0x82000000 if TFABOOT + default 0x20100000 + +if FSL_LS_PPA +config SYS_LS_PPA_FW_ADDR + hex "PPA Firmware Addr" + default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1028A + default 0x400000 if SYS_LS_PPA_FW_IN_MMC && ARCH_LS1028A +if CHAIN_OF_TRUST +config SYS_LS_PPA_ESBC_ADDR + hex "PPA header Addr" + default 0x20600000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1028A +endif +endif + +source "board/freescale/common/Kconfig" + +endif + if TARGET_LS1028ARDB config SYS_BOARD diff --git a/board/freescale/ls1028a/MAINTAINERS b/board/freescale/ls1028a/MAINTAINERS index 135454cfd62..6f1a95ea3b1 100644 --- a/board/freescale/ls1028a/MAINTAINERS +++ b/board/freescale/ls1028a/MAINTAINERS @@ -1,3 +1,14 @@ +LS1028AQDS BOARD +M: Sudhanshu Gupta +M: Rai Harninder +M: Rajesh Bhagat +M: Tang Yuantian +S: Maintained +F: board/freescale/ls1028a/ +F: include/configs/ls1028a_common.h +F: include/configs/ls1028aqds.h +F: configs/ls1028aqds_tfa_defconfig + LS1028ARDB BOARD M: Sudhanshu Gupta M: Rai Harninder diff --git a/board/freescale/ls1028a/README b/board/freescale/ls1028a/README index 94a390c917b..323881faa50 100644 --- a/board/freescale/ls1028a/README +++ b/board/freescale/ls1028a/README @@ -77,3 +77,88 @@ Serial audio interface(SAI) - Audio codec SGTL5000 provides headphone and audio LINEOUT for stereo speakers - IEEE1588 interface to support audio on SAI4 + +QDS Default Switch Settings (1: ON; 0: OFF) +------------------------------------------- +For SD Boot +SW1 : 1000_0000 +SW2 : 1110_0110 +SW3 : 0000_0010 +SW4 : 0000_0000 +SW5 : 0000_0000 +SW6 : 0000_0000 +SW7 : 1111_0011 +SW8 : 1110_0000 +SW9 : 1000_0001 +SW10: 1110_0000 + +For XSPI Boot +SW1 : 1111_0000 +SW2 : 0000_0110 +SW3 : 0000_0010 +SW4 : 0000_0000 +SW5 : 0110_0000 +SW6 : 0101_0000 +SW7 : 1111_0011 +SW8 : 1110_0000 +SW9 : 1000_0000 +SW10: 1110_0000 + +LS1028AQDS board Overview +------------------------- +Processor + Two Arm Cortex- A72 processor cores: + - Based on 64-bit ARMv8 architecture + - Up to 1.3 GHz operation + - Single-threaded cores with 48 KB L1 instruction cache and 32 KB L1 + data cache + - Arranged as a single cluster of two cores sharing a single 1 MB L2 + cache +DDR memory + - Supports data rates of up to 1.6 GT/s for both, DDR4 and DDR3L + - Supports a single- or dual-ranked SODIMM or UDIMM connector + - 32-bit data and 4-bit ECC + - Supports x8/x16 devices + - Supports ECC error detection and correction + - 1.35 V or 1.2 V DDR power supply, with automatic tracking of VTT, to + all devices in case of DDR3L or DDR4, respectively. Power can + switch to 1.35 V or 1.2 V, based on the switch settings for DDR3L or + DDR4 devices, respectively +SerDes (Serializer/Deserializer) + - Four-lane (0-3) SerDes: + - Lane 0: supports PCIe Gen1/2/3 with x1, x2, and x4 operation, 10 + Gbit SXGMII, 1 Gbit SGMII + - Lane 1: supports PCIe Gen1/2/3 with x1, x2, and x4 operation, 1 Gbit + SGMII, 10 Gbit QXGMII, 5 Gbit QSGMII, 1 Gbit SGMII + - Lane 2: supports PCIe Gen1/2/3 with x1, x2, and x4 operation, 1 Gbit + SGMII + - Lane 3: supports PCIe Gen1/2/3 with x1, x2, and x4 operation, 1 Gbit + SGMII, SATA 2.0/3.0 + - Four slots on SerDes lanes support PCIe Gen1/2/3, 1 Gbit SGMII + add-in cards + - Lane 1 connects to a 2x10 connector with SFP+ through a retimer; + lane 2 (TX lines) connects to an SMA connector + Lane 3 connects to 1x7 header to support SATA devices +eSDHC + - eSDHC1, eSDHC2 +SPI + - SPI1 and SPI2 support three onboard SPI flash memory devices: + 512 Mbit high-speed flash (with speed of up to 108/54 MHz) + memory for storage + 4 Mbit low-speed flash memory (with speed of up to 40 MHz) + 64 Mbit high-speed flash memory (with speed of up to 104/80 + MHz) + - SPI3 supports one onboard 64 Mbit SPI flash memory (with speed of + up to 104/80 MHz) + - All memories operate at 1.8 V + - A header is provided on SPI1 to test SPI slave mode +I2C + - LS1028A supports eight I2C controllers +Serial audio interface(SAI) + Two SAI ports with audio codec SGTL5000: + - Include stereo LINEIN with support for external analog input + - Provide headphone and line output +Display + - DisplayPort connector to connect the DP data to a 4K display device + (computer monitor) + - eDP connector to connect the DP data to a 4K display panel diff --git a/board/freescale/ls1028a/ls1028a.c b/board/freescale/ls1028a/ls1028a.c index e3666c34b6c..e5de4eb70c4 100644 --- a/board/freescale/ls1028a/ls1028a.c +++ b/board/freescale/ls1028a/ls1028a.c @@ -27,6 +27,35 @@ DECLARE_GLOBAL_DATA_PTR; +int config_board_mux(void) +{ +#if defined(CONFIG_TARGET_LS1028AQDS) && defined(CONFIG_FSL_QIXIS) + u8 reg; + + reg = QIXIS_READ(brdcfg[13]); + /* Field| Function + * 7-6 | Controls I2C3 routing (net CFG_MUX_I2C3): + * I2C3 | 10= Routes {SCL, SDA} to CAN1 transceiver as {TX, RX}. + * 5-4 | Controls I2C4 routing (net CFG_MUX_I2C4): + * I2C4 |11= Routes {SCL, SDA} to CAN2 transceiver as {TX, RX}. + */ + reg &= ~(0xf0); + reg |= 0xb0; + QIXIS_WRITE(brdcfg[13], reg); + + reg = QIXIS_READ(brdcfg[15]); + /* Field| Function + * 7 | Controls the CAN1 transceiver (net CFG_CAN1_STBY): + * CAN1 | 0= CAN #1 transceiver enabled + * 6 | Controls the CAN2 transceiver (net CFG_CAN2_STBY): + * CAN2 | 0= CAN #2 transceiver enabled + */ + reg &= ~(0xc0); + QIXIS_WRITE(brdcfg[15], reg); +#endif + return 0; +} + int board_init(void) { #ifdef CONFIG_ENV_IS_NOWHERE @@ -54,6 +83,15 @@ int board_eth_init(bd_t *bis) return pci_eth_init(bis); } +#if defined(CONFIG_ARCH_MISC_INIT) +int arch_misc_init(void) +{ + config_board_mux(); + + return 0; +} +#endif + int board_early_init_f(void) { #ifdef CONFIG_SYS_I2C_EARLY_INIT diff --git a/configs/ls1028aqds_tfa_defconfig b/configs/ls1028aqds_tfa_defconfig new file mode 100644 index 00000000000..b02af02c1cd --- /dev/null +++ b/configs/ls1028aqds_tfa_defconfig @@ -0,0 +1,61 @@ +CONFIG_ARM=y +CONFIG_TARGET_LS1028AQDS=y +CONFIG_SYS_FSL_SDHC_CLK_DIV=1 +CONFIG_TFABOOT=y +CONFIG_NR_DRAM_BANKS=2 +CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y +CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y +CONFIG_AHCI=y +CONFIG_DISTRO_DEFAULTS=y +# CONFIG_SYS_MALLOC_F is not set +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256 video=1920x1080-32@60 cma=256M" +CONFIG_CMD_GREPENV=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_CACHE=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1028a-qds" +CONFIG_ENV_IS_IN_MMC=y +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_NETCONSOLE=y +CONFIG_DM=y +CONFIG_SCSI_AHCI=y +CONFIG_SATA_CEVA=y +CONFIG_FSL_CAAM=y +CONFIG_DM_MMC=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_PHYLIB=y +CONFIG_PHY_ATHEROS=y +CONFIG_DM_ETH=y +CONFIG_PHY_GIGE=y +CONFIG_E1000=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_DM_PCI_COMPAT=y +CONFIG_PCIE_LAYERSCAPE=y +CONFIG_SCSI=y +CONFIG_DM_SCSI=y +CONFIG_SYS_NS16550=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_FSL_DSPI=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/include/configs/ls1028aqds.h b/include/configs/ls1028aqds.h new file mode 100644 index 00000000000..be018ef2be4 --- /dev/null +++ b/include/configs/ls1028aqds.h @@ -0,0 +1,161 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2019 NXP + */ + +#ifndef __LS1028A_QDS_H +#define __LS1028A_QDS_H + +#include "ls1028a_common.h" + +#define CONFIG_SYS_CLK_FREQ 100000000 +#define CONFIG_DDR_CLK_FREQ 100000000 +#define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ / 4) + +/* DDR */ +#define CONFIG_DIMM_SLOTS_PER_CTLR 2 + +#define CONFIG_QIXIS_I2C_ACCESS +#define CONFIG_SYS_I2C_EARLY_INIT + +/* + * QIXIS Definitions + */ +#define CONFIG_FSL_QIXIS + +#ifdef CONFIG_FSL_QIXIS +#define QIXIS_BASE 0x7fb00000 +#define QIXIS_BASE_PHYS QIXIS_BASE +#define CONFIG_SYS_I2C_FPGA_ADDR 0x66 +#define QIXIS_LBMAP_SWITCH 1 +#define QIXIS_LBMAP_MASK 0x0f +#define QIXIS_LBMAP_SHIFT 5 +#define QIXIS_LBMAP_DFLTBANK 0x00 +#define QIXIS_LBMAP_ALTBANK 0x00 +#define QIXIS_LBMAP_SD 0x00 +#define QIXIS_LBMAP_EMMC 0x00 +#define QIXIS_LBMAP_QSPI 0x00 +#define QIXIS_RCW_SRC_SD 0x8 +#define QIXIS_RCW_SRC_EMMC 0x9 +#define QIXIS_RCW_SRC_QSPI 0xf +#define QIXIS_RST_CTL_RESET 0x31 +#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 +#define QIXIS_RCFG_CTL_RECONFIG_START 0x21 +#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 +#define QIXIS_RST_FORCE_MEM 0x01 + +#define CONFIG_SYS_FPGA_CSPR_EXT (0x0) +#define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \ + CSPR_PORT_SIZE_8 | \ + CSPR_MSEL_GPCM | \ + CSPR_V) +#define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024) +#define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ + CSOR_NOR_NOR_MODE_AVD_NOR | \ + CSOR_NOR_TRHZ_80) +#endif + +/* RTC */ +#define CONFIG_SYS_RTC_BUS_NUM 1 +#define I2C_MUX_CH_RTC 0xB + +/* Store environment at top of flash */ +#define CONFIG_ENV_SIZE 0x2000 + +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE +#else +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE +#endif + +/* SATA */ +#define CONFIG_SCSI_AHCI_PLAT + +#define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1 +#ifndef CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT2 +#endif +#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 +#define CONFIG_SYS_SCSI_MAX_LUN 1 +#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ + CONFIG_SYS_SCSI_MAX_LUN) +/* DSPI */ +#ifdef CONFIG_FSL_DSPI +#define CONFIG_SPI_FLASH_SST +#define CONFIG_SPI_FLASH_EON +#endif + +#ifndef SPL_NO_ENV +#undef CONFIG_EXTRA_ENV_SETTINGS +#define CONFIG_EXTRA_ENV_SETTINGS \ + "board=ls1028aqds\0" \ + "hwconfig=fsl_ddr:bank_intlv=auto\0" \ + "ramdisk_addr=0x800000\0" \ + "ramdisk_size=0x2000000\0" \ + "fdt_high=0xffffffffffffffff\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "fdt_addr=0x00f00000\0" \ + "kernel_addr=0x01000000\0" \ + "scriptaddr=0x80000000\0" \ + "scripthdraddr=0x80080000\0" \ + "fdtheader_addr_r=0x80100000\0" \ + "kernelheader_addr_r=0x80200000\0" \ + "load_addr=0xa0000000\0" \ + "kernel_addr_r=0x81000000\0" \ + "fdt_addr_r=0x90000000\0" \ + "ramdisk_addr_r=0xa0000000\0" \ + "kernel_start=0x1000000\0" \ + "kernelheader_start=0x800000\0" \ + "kernel_load=0xa0000000\0" \ + "kernel_size=0x2800000\0" \ + "kernelheader_size=0x40000\0" \ + "kernel_addr_sd=0x8000\0" \ + "kernel_size_sd=0x14000\0" \ + "kernelhdr_addr_sd=0x4000\0" \ + "kernelhdr_size_sd=0x10\0" \ + "console=ttyS0,115200\0" \ + "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ + BOOTENV \ + "boot_scripts=ls1028aqds_boot.scr\0" \ + "boot_script_hdr=hdr_ls1028aqds_bs.out\0" \ + "scan_dev_for_boot_part=" \ + "part list ${devtype} ${devnum} devplist; " \ + "env exists devplist || setenv devplist 1; " \ + "for distro_bootpart in ${devplist}; do " \ + "if fstype ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "bootfstype; then " \ + "run scan_dev_for_boot; " \ + "fi; " \ + "done\0" \ + "scan_dev_for_boot=" \ + "echo Scanning ${devtype} " \ + "${devnum}:${distro_bootpart}...; " \ + "for prefix in ${boot_prefixes}; do " \ + "run scan_dev_for_scripts; " \ + "done;" \ + "\0" \ + "boot_a_script=" \ + "load ${devtype} ${devnum}:${distro_bootpart} " \ + "${scriptaddr} ${prefix}${script}; " \ + "env exists secureboot && load ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "${scripthdraddr} ${prefix}${boot_script_hdr} " \ + "&& esbc_validate ${scripthdraddr};" \ + "source ${scriptaddr}\0" \ + "sd_bootcmd=echo Trying load from SD ..;" \ + "mmcinfo; mmc read $load_addr " \ + "$kernel_addr_sd $kernel_size_sd && " \ + "env exists secureboot && mmc read $kernelheader_addr_r " \ + "$kernelhdr_addr_sd $kernelhdr_size_sd " \ + " && esbc_validate ${kernelheader_addr_r};" \ + "bootm $load_addr#$board\0" \ + "emmc_bootcmd=echo Trying load from EMMC ..;" \ + "mmcinfo; mmc dev 1; mmc read $load_addr " \ + "$kernel_addr_sd $kernel_size_sd && " \ + "env exists secureboot && mmc read $kernelheader_addr_r " \ + "$kernelhdr_addr_sd $kernelhdr_size_sd " \ + " && esbc_validate ${kernelheader_addr_r};" \ + "bootm $load_addr#$board\0" +#endif +#endif /* __LS1028A_QDS_H */ -- cgit v1.3.1 From 4dde343d7e9938e781feb3fbe360d6a7befa48f6 Mon Sep 17 00:00:00 2001 From: Florin Chiculita Date: Mon, 22 Apr 2019 11:57:47 +0300 Subject: board: fsl: lx2160ardb: invert AQR107 pins polarity AQR107 PHYs interrupt pins are active-low, while the GIC expects a level-high signal. Signed-off-by: Florin Chiculita Reviewed-by: Prabhakar Kushwaha --- board/freescale/lx2160a/lx2160a.c | 8 ++++++++ include/configs/lx2160ardb.h | 1 + 2 files changed, 9 insertions(+) (limited to 'include') diff --git a/board/freescale/lx2160a/lx2160a.c b/board/freescale/lx2160a/lx2160a.c index 3875d045438..6109b280c68 100644 --- a/board/freescale/lx2160a/lx2160a.c +++ b/board/freescale/lx2160a/lx2160a.c @@ -449,12 +449,20 @@ unsigned long get_board_ddr_clk(void) int board_init(void) { +#if defined(CONFIG_FSL_MC_ENET) && defined(CONFIG_TARGET_LX2160ARDB) + u32 __iomem *irq_ccsr = (u32 __iomem *)ISC_BASE; +#endif #ifdef CONFIG_ENV_IS_NOWHERE gd->env_addr = (ulong)&default_environment[0]; #endif select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); +#if defined(CONFIG_FSL_MC_ENET) && defined(CONFIG_TARGET_LX2160ARDB) + /* invert AQR107 IRQ pins polarity */ + out_le32(irq_ccsr + IRQCR_OFFSET / 4, AQR107_IRQ_MASK); +#endif + #ifdef CONFIG_FSL_CAAM sec_init(); #endif diff --git a/include/configs/lx2160ardb.h b/include/configs/lx2160ardb.h index 972bb5e102b..c6bacb65ec0 100644 --- a/include/configs/lx2160ardb.h +++ b/include/configs/lx2160ardb.h @@ -60,6 +60,7 @@ #define AQR107_PHY_ADDR1 0x04 #define AQR107_PHY_ADDR2 0x05 +#define AQR107_IRQ_MASK 0x0C #define CORTINA_NO_FW_UPLOAD #define CORTINA_PHY_ADDR1 0x0 -- cgit v1.3.1 From 78c58082a926b4e4c5dda4332bec1016e778f670 Mon Sep 17 00:00:00 2001 From: Vinitha V Pillai Date: Tue, 23 Apr 2019 05:52:17 +0000 Subject: armv8: Secure Boot: Modify boot_a_script definition MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit esbc_validate command will not be executed if “load” command for its header fails and will further execute the source command for bootscript, without its validation and boot process continues. To halt the boot process in case secure boot header is not loaded successfully, esbc_validate command is invoked separately after “load” command. The secure boot validation of the bootscript header will fail (if header is not loaded) and halts the boot process, which prevent source command from execution. Signed-off-by: Vinitha V Pillai Signed-off-by: Udit Agarwal Reviewed-by: Prabhakar Kushwaha --- include/configs/ls1012afrwy.h | 3 ++- include/configs/ls1012ardb.h | 3 ++- include/configs/ls1021atwr.h | 3 ++- include/configs/ls1043a_common.h | 3 ++- include/configs/ls1046a_common.h | 5 +++-- include/configs/ls1088ardb.h | 3 ++- include/configs/ls2080ardb.h | 3 ++- 7 files changed, 15 insertions(+), 8 deletions(-) (limited to 'include') diff --git a/include/configs/ls1012afrwy.h b/include/configs/ls1012afrwy.h index ebb1df41c72..12e6437a055 100644 --- a/include/configs/ls1012afrwy.h +++ b/include/configs/ls1012afrwy.h @@ -98,7 +98,8 @@ "${scriptaddr} ${prefix}${script}; " \ "env exists secureboot && load ${devtype} " \ "${devnum}:${distro_bootpart} " \ - "${scripthdraddr} ${prefix}${boot_script_hdr} " \ + "${scripthdraddr} ${prefix}${boot_script_hdr}; " \ + "env exists secureboot " \ "&& esbc_validate ${scripthdraddr};" \ "source ${scriptaddr}\0" \ "installer=load mmc 0:2 $load_addr " \ diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h index f149a604cfc..f6640fa4994 100644 --- a/include/configs/ls1012ardb.h +++ b/include/configs/ls1012ardb.h @@ -98,7 +98,8 @@ "${scriptaddr} ${prefix}${script}; " \ "env exists secureboot && load ${devtype} " \ "${devnum}:${distro_bootpart} " \ - "${scripthdraddr} ${prefix}${boot_script_hdr} " \ + "${scripthdraddr} ${prefix}${boot_script_hdr}; " \ + "env exists secureboot " \ "&& esbc_validate ${scripthdraddr};" \ "source ${scriptaddr}\0" \ "installer=load mmc 0:2 $load_addr " \ diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 7fe7bab8e41..ec0aad59903 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -363,7 +363,8 @@ "${scriptaddr} ${prefix}${script}; " \ "env exists secureboot && load ${devtype} " \ "${devnum}:${distro_bootpart} " \ - "${scripthdraddr} ${prefix}${boot_script_hdr} " \ + "${scripthdraddr} ${prefix}${boot_script_hdr}; " \ + "env exists secureboot " \ "&& esbc_validate ${scripthdraddr};" \ "source ${scriptaddr}\0" \ "installer=load mmc 0:2 $load_addr " \ diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index dc688f3af51..1d6cf47d21a 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -273,7 +273,8 @@ "${scriptaddr} ${prefix}${script}; " \ "env exists secureboot && load ${devtype} " \ "${devnum}:${distro_bootpart} " \ - "${scripthdraddr} ${prefix}${boot_script_hdr} " \ + "${scripthdraddr} ${prefix}${boot_script_hdr}; " \ + "env exists secureboot " \ "&& esbc_validate ${scripthdraddr};" \ "source ${scriptaddr}\0" \ "qspi_bootcmd=echo Trying load from qspi..;" \ diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index ea6209ad2ef..9a08f8e88d7 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -253,8 +253,9 @@ "${scriptaddr} ${prefix}${script}; " \ "env exists secureboot && load ${devtype} " \ "${devnum}:${distro_bootpart} " \ - "${scripthdraddr} ${prefix}${boot_script_hdr} " \ - "&& esbc_validate ${scripthdraddr};" \ + "${scripthdraddr} ${prefix}${boot_script_hdr}; " \ + "env exists secureboot " \ + "&& esbc_validate ${scripthdraddr};" \ "source ${scriptaddr}\0" \ "qspi_bootcmd=echo Trying load from qspi..;" \ "sf probe && sf read $load_addr " \ diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h index 45af087dc6d..322adb530a3 100644 --- a/include/configs/ls1088ardb.h +++ b/include/configs/ls1088ardb.h @@ -398,7 +398,8 @@ "${scriptaddr} ${prefix}${script}; " \ "env exists secureboot && load ${devtype} " \ "${devnum}:${distro_bootpart} " \ - "${scripthdraddr} ${prefix}${boot_script_hdr} " \ + "${scripthdraddr} ${prefix}${boot_script_hdr}; "\ + "env exists secureboot " \ "&& esbc_validate ${scripthdraddr};" \ "source ${scriptaddr}\0" \ "installer=load mmc 0:2 $load_addr " \ diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index e41ace66859..2e8a8bbdb74 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -495,7 +495,8 @@ unsigned long get_board_sys_clk(void); "${scriptaddr} ${prefix}${script}; " \ "env exists secureboot && load ${devtype} " \ "${devnum}:${distro_bootpart} " \ - "${scripthdraddr} ${prefix}${boot_script_hdr} " \ + "${scripthdraddr} ${prefix}${boot_script_hdr}; " \ + "env exists secureboot " \ "&& esbc_validate ${scripthdraddr};" \ "source ${scriptaddr}\0" \ "qspi_bootcmd=echo Trying load from qspi..;" \ -- cgit v1.3.1 From e50663e85d74c4f8015d5157c249cf62c7d0cded Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 13 May 2019 17:04:51 +0300 Subject: armv8: lx2160: Drop useless CONFIG_CMDLINE_EDITING from config.h commit 58c3e62040be ("armv8: lx2160ardb : Add support for LX2160ARDB platform") brought a new boards support with redundancy in the config.h. One of them is CONFIG_CMDLINE_EDITING which is removed by this change. Cc: Priyanka Jain Cc: Peng Ma Cc: Prabhakar Kushwaha Signed-off-by: Andy Shevchenko Reviewed-by: Prabhakar Kushwaha --- include/configs/lx2160a_common.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h index 637619cb555..eb0b1766aa7 100644 --- a/include/configs/lx2160a_common.h +++ b/include/configs/lx2160a_common.h @@ -187,7 +187,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */ -#define CONFIG_CMDLINE_EDITING 1 #define CONFIG_SYS_MAXARGS 64 /* max command args */ #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ -- cgit v1.3.1